Agricultural Produce Market Committee Tender

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttresses, plinth and string courses cost of all materials, labour complete as per specifications with lead and lifts and work to be carried out as per the instruction of Engineer in charge.

Fabricating, supplying and erecting M.S. TubularTruss of span upto 10m. The bottom and top member is provided with 50x50x6mm double equal angles, welded back to back and in between top and bottom line, in areas of mid section is provided with 50x50x6mm equal single angle for vertical and inclined members and at supporting ends 40x40x5mm single angle is provided. All the members are welded together with 6mm gusset plate as per Drawing. The entire truss is anchored in RCC column by using 4 Nos. of M.S. anchor bolts at each support, with 10mm thick base plate and shoe plate.The work includes cutting, straightening, placing in position of M.S angle and wleding wherever necessary, and applying one coat of red oxide primer coat to all themembers including cost of all materials, labour charges, and hire charges of machineries for cutting, welding, grinding and erection equipments, with all lead and lift, transportation, etc., complete as per specification. with lead and lifts and work to be carried out as per the instruction of Engineer in charge.

Providing and fixing Colour Coated Galuvalium (galuvalium sheet) sheet of 0.47 to 0.50mm total thickness (Al-Zn alloy) over the busstand platform beams (MS tubular truss and purlins) at a height of 5m From the floor level etc., including providing and fixing extra sheet for over lapping the main sheet as (0.10 to 0.20m width) requird etc., complete including providing and fixing colour coated Galuvalium (galuvalium sheet) sheet of 0.47 to 0.50mm thickness for gutter etc., complete including Providing and fixing the sheet with self screwing steel screws with rubber washers and including cost of crimp curve charges etc., comlete., with lead and lifts and work to be carried out as per the instruction of Engineer in charge.

Providing and fixing Colour Coated Galuvalium ridge sheet of width and 0.47 to 0.50mm total thickness (Al-Zn alloy coated steel) over the main roof sheets with requird overlap (0.10 to 0.20m width) ridge portion for a hight of everage 5m from the floor level etc., complete including Providing and fixing the sheet with self screwing steel screws with rubber washers and including cost of crimp curve charges etc., comlete., including cost of all materials, labour,lead lift loading. with lead and lifts and work to be carried out as per the instruction of Engineer in charge.

KSRB 15.18.2 : Providing and applying enamel metal paint two coats (excluding priming coat) over new steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter, including cost of materials, labour, complete as per specifications. and direction of engineer in charge of work with lead and lifts and work to be carried out as per the instruction of Engineer in charge.

TAPCMS KSRRB -300-14 : Excavation for roadway in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers trimming bottom and side slopes in accordance with the requirements of lines, grades and cross sections, and transporting to the embankment location Complete as per specifications. MORTH Specification No. 301 with lead and lifts and work to be carried out as per the instruction of Engineer in charge.

KSRRB 400-2. Providing, laying, spreading and compacting specified graded sand, gravel or any other course material 60% and crushed stone aggregates of granite / trap / basalt 40% in sub-base course including premixing the material at OMC in mechanical mixer (Pug mill), carriage of mixed material up to 1km, spreading in uniform layers with motor grader on a prepared base and compacting with power roller to achieve the desired density including all materials, labour, HOM of machinery, lighting, guarding, barricading and maintenance of diversion complete as per specifications. MORTH Chapter 4 Note: Granulated blast furnace slag/Slag sand may be used for item No. 20.1, 20.2,20.3,20.4,20.5,20.6 instead of river sand / grit and 6 mm below aggregates or combination with lead and lifts and work to be carried out as per the instruction of Engineer in charge. )

KSRB 14.6-2 :Providing and laying heavy duty cobble stones 75mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength of 281 kg per sqm over 50mm thick sand bed (average thickness ) and compacting with plate vibrator having 3 tons compaction force thereby forcing part of sand underneath to come up in between joints, final compaction of paver surface joints into its final level, including cost of materials, labour and HOM of machineries complete as per specifications. Specification No. KBS with lead and lifts and work to be carried out as per the instruction of Engineer in charge.

KSRB 4-1.6 ; Providing and laying in position plain cement concrete of mix 1:2:4 with cement @ 240kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.69 cum and fine aggregtes @ 0.459cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, plinth and cills, ncluding cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification No. KBS 4.1, 4.2.with lead and lifts and work to be carried out as per the instruction of Engineer in charge.