Agricultural Produce Market Committee Tender

code04 - Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code05 - Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in- cluding water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code06 - Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code07 - Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code08 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code09 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code10 - Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code11 - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU wa- terproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the wa- terproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code12 - Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code13 - Dismantling weather proof course and removing and conveying the debris to a distance to the appropriate disposal area etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code14 - Removing white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including repairs to scraches including cost of labour, material etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code15 - Removing the old paint from wood and / or wood based surface with blow lamp and making surface even including cost of materials, labour, etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code16 - Dismantling tile work in floors and roofs laid in cement mortar includ- ing stacking material to the appropriate disposal area etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work. For thickness of tiles 10 mm to 25 mm

code17 - Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:4 including cutting the patches in proper shape and replastering the surface of the wall including disposal of rubbish with a lead of 50m including curing cost of materials, labour, etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code18 - Repairing and fixing shutters (panelled or glazed) to doors, windows, ventilators and cupboards. etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code19 - Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with ISI marked black solid plastic seat and lid 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code20 - Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin with 5 litre white P.V.C. automatic flushing cistern of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code21 - Providing and fixing White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code22 - Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code23 - Providing and fixing Internal work - Exposed on wall Chlorinated Polyvinyl Chloride (CPVC) 20 mm nominal dia Pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code24 - Providing and fixing PTMT grating of approved quality and colour. Circular type 100 mm nominal dia etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code25 - Providing UNPLASTICISED PVC Pipes of SN4, 110mm dia. conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code26 - Guniting concrete surface with cement mortar applied with compressor after cleaning surface and spraying with epoxy etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code27 - Supplying of LED light fighting 1 x4 feet - LED PVC Square Batten 20/22 W with high quality diffuser with Life of 25000 burning hours & 70 percent lumen maintenance with CRI Grater than 80. Power Input: 220-240V at 50Hz & Power factor grater than 0.9 along with CE approved. 5 years Warranty against any manufacturing defect working under standard electrical condition etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code28 - Supplying & fixing of retrofit type - LED bulb 9 W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI Grater than 70 percentage. efficacy Grater than 80 lumen per W, life Grater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF Grater than 0.95, power loss should lesser than 5 percentage of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work. 9 W, 6500K

code29 - Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code30 - Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code31 - Wiring for lighting/power circuit using one of FR PVC insulated 1100V grade, multistrand Copper conductor single core cable in open or concealed system of wiring with specified IS-694:1990 & confirming to the attached GTP of GROUP -A. etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code32 - Supplying and wiring Short point upto 3Mtr from tapping point to out let via switch adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.