Agricultural Produce Market Committee Tender

APMCHO04 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Including cost of all materials, all lead and lifts, loading and un loading charges, hire charges of all machineries and equipements and all incidental charges and work should be carried out as per specifications and as directed by the Engieer-in-charge of the work.

APMCHO05 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Including cost of all materials, all lead and lifts, loading and un loading charges, hire charges of all machineries and equipements and all incidental charges and work should be carried out as per specifications and as directed by the Engieer-in-charge of the work.

APMCHO06 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings Including cost of all materials, all lead and lifts, loading and un loading charges, hire charges of all machineries and equipements and all incidental charges and work should be carried out as per specifications and as directed by the Engieer-in-charge of the work.

APMCHO07 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Including cost of all materials, all lead and lifts, loading and un loading charges, hire charges of all machineries and equipements and all incidental charges and work should be carried out as per specifications and as directed by the Engieer-in-charge of the work.

APMCHO08 - Design, supplying, erecting testing and commissioning of 6 passengers/ Bed-cum-passenger hospital lift with speed of 1mtr per second, variable voltage variable frequency drive, with or without machine room for the available well size, operating at 415 V 3 phase 50 cycles AC supply, powder coated / Stainless Steel car entrance doors enclosures with suitable colour vinyl flooring, LED car illumination, emergency light, intercom and fan as desired by the user, central opening / side opening door with or without attendant operation, 7 segment display buttons, call register indicator, fireman drive, SS handrails inside car, full length infrared curtain in car door, automatic rescue device with batteries, voice announcing in regional / international languages, Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil works like fixing of guide rail, counter weight etc.,With Machine Room-SS Finish, 2 Stops. Including cost of all materials, all lead and lifts, loading and un loading charges, hire charges of all machineries and equipements and all incidental charges and work should be carried out as per specifications and as directed by the Engieer-in-charge of the work.

APMCHO09 - Fabricating supplying and mounting MS box made out 16 SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. (For Control Panel).Including cost of all materials, all lead and lifts, loading and un loading charges, hire charges of all machineries and equipements and all incidental charges and work should be carried out as per specifications and as directed by the Engieer-in-charge of the work.

APMCHO10 - Supplying and fixing of 50x50x6mm angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. (For Control Panel). Including cost of all materials, all lead and lifts, loading and un loading charges, hire charges of all machineries and equipements and all incidental charges and work should be carried out as per specifications and as directed by the Engieer-in-charge of the work.

APMCHO11 - Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. (For Control Panel). Including cost of all materials, all lead and lifts, loading and un loading charges, hire charges of all machineries and equipements and all incidental charges and work should be carried out as per specifications and as directed by the Engieer-in-charge of the work.

APMCHO12 - Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter. (For Control Panel). Including cost of all materials, all lead and lifts, loading and un loading charges, hire charges of all machineries and equipements and all incidental charges and work should be carried out as per specifications and as directed by the Engieer-in-charge of the work.

APMCHO13 - Supplying and fixing 50-63 A TPN Amps TPN miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required.confirming to IEC 60898. (For Control Panel). Including cost of all materials, all lead and lifts, loading and un loading charges, hire charges of all machineries and equipements and all incidental charges and work should be carried out as per specifications and as directed by the Engieer-in-charge of the work.

APMCHO14 - Supplying, fixing and wiring of 32-40Amps 4 pole Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/panel board. (For Control Panel). Including cost of all materials, all lead and lifts, loading and un loading charges, hire charges of all machineries and equipements and all incidental charges and work should be carried out as per specifications and as directed by the Engieer-in-charge of the work.

APMCHO15 - Supplying and fixing 6-32 Amps SP miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required.confirming to IEC 60898. (For Control Panel). Including cost of all materials, all lead and lifts, loading and un loading charges, hire charges of all machineries and equipements and all incidental charges and work should be carried out as per specifications and as directed by the Engieer-in-charge of the work.

APMCHO16 - Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/ manual reset facility suitable to mount on DIN rail/ flush mounting on panel board. (For Control Panel). Including cost of all materials, all lead and lifts, loading and un loading charges, hire charges of all machineries and equipements and all incidental charges and work should be carried out as per specifications and as directed by the Engieer-in-charge of the work.

APMCHO17 - Supplying 100 Amps 4 x 30 x 6 mm Aluminium Strips rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. (For Control Panel). Including cost of all materials, all lead and lifts, loading and un loading charges, hire charges of all machineries and equipements and all incidental charges and work should be carried out as per specifications and as directed by the Engieer-in-charge of the work.

APMCHO18 - Open Conduit System : Supplying heavy gauge PVC conduit pipe 25mm dia 2 mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. Including cost of all materials, all lead and lifts, loading and un loading charges, hire charges of all machineries and equipements and all incidental charges and work should be carried out as per specifications and as directed by the Engieer-in-charge of the work.

APMCHO19 - Wiring for lighting/power circuit using one of 10 Sqmm FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest mendments. Including cost of all materials, all lead and lifts, loading and un loading charges, hire charges of all machineries and equipements and all incidental charges and work should be carried out as per specifications and as directed by the Engieer-in-charge of the work.

APMCHO20 - Supplying and fixing of 6 Way surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete.Including cost of all materials, all lead and lifts, loading and un loading charges, hire charges of all machineries and equipements and all incidental charges and work should be carried out as per specifications and as directed by the Engieer-in-charge of the work.

APMCHO21 - Supplying and fixing of 6 Module superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. Including cost of all materials, all lead and lifts, loading and un loading charges, hire charges of all machineries and equipements and all incidental charges and work should be carried out as per specifications and as directed by the Engieer-in-charge of the work.

APMCHO22 - Supplying and fixing of 6A One Way modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Including cost of all materials, all lead and lifts, loading and un loading charges, hire charges of all machineries and equipements and all incidental charges and work should be carried out as per specifications and as directed by the Engieer-in-charge of the work.

APMCHO23 - Supplying and fixing of 6A Three Way Modular socket & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Including cost of all materials, all lead and lifts, loading and un loading charges, hire charges of all machineries and equipements and all incidental charges and work should be carried out as per specifications and as directed by the Engieer-in-charge of the work.

APMCHO24 - Supplying And fixing/replacing of 6A Batten Holder on existing switch board. Including cost of all materials, all lead and lifts, loading and un loading charges, hire charges of all machineries and equipements and all incidental charges and work should be carried out as per specifications and as directed by the Engieer-in-charge of the work.

APMCHO25 - 1.1 kV, 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LT UG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. Including cost of all materials, all lead and lifts, loading and un loading charges, hire charges of all machineries and equipements and all incidental charges and work should be carried out as per specifications and as directed by the Engieer-in-charge of the work.

APMCHO26 - Laying of 2.5 to 25 Sqmm LT UG cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. Including cost of all materials, all lead and lifts, loading and un loading charges, hire charges of all machineries and equipements and all incidental charges and work should be carried out as per specifications and as directed by the Engieer-in-charge of the work.

APMCHO27 - Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. Including cost of all materials, all lead and lifts, loading and un loading charges, hire charges of all machineries and equipements and all incidental charges and work should be carried out as per specifications and as directed by the Engieer-in-charge of the work.

APMCHO28 - Supplying and running of 25x6mm GI strip for grounding connections, using necessary fixing materials as required. Including cost of all materials, all lead and lifts, loading and un loading charges, hire charges of all machineries and equipements and all incidental charges and work should be carried out as per specifications and as directed by the Engieer-in-charge of the work.

APMCHO29 - Supplying and running 8 SWG Copper wire. for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc.Including cost of all materials, all lead and lifts, loading and un loading charges, hire charges of all machineries and equipements and all incidental charges and work should be carried out as per specifications and as directed by the Engieer-in-charge of the work.