Agricultural Produce Market Committee Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 1,20,915Document Cost
Refer DocumentsTender Fee
₹ 1,790
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
APMC/2024-25/OW/WORK_INDENT368Tender No
APMC/2024-25/OW/WORK_INDENT368Tender Authority
Agricultural Produce Market Committee ViewPurchaser Address
-Website
http://www.arthapedia.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
code04 - Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) complete with all leads & lift complete as per specification and as directed by the engineer of the work.
40.4055
6948
280773.77895
... More
code05 - Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) complete with all leads & lift complete as per specification and as directed by the engineer of the work.
14.9769
6708
100471.784805
... More
code06 - Providing and laying in position Cement Concrete M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete with all leads & lift complete as per specification and as directed by the engineer of the work.
29.171
7185
209594.21842
... More
code07 - Providing and laying in Cement Concrete M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. complete with all leads & lift complete as per specification and as directed by the engineer of the work.
2.536
11566
29331.6296
... More
code08 - Providing and laying in position Cement Concrete M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ranite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS odes machine mixed with super plasticisers laid in layers, well compacted using needle ibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to therequirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances equired to complete with all leads & lift complete as per specification and as directed by the engineer of the work.
4.968
12214
60682.92768
... More
code09 - Providing and laying in position Cement Concrete M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete with all leads & lift complete as per specification and as directed by the engineer of the work.
1.708
12336
21071.4252
... More
code10 - Providing and laying in Cement Concrete M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete with all leads & lift complete as per specification and as directed by the engineer of the work.
11.172
10206
114021.432
... More
code11 - Providing and laying in position Cement Concrete M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required tocomplete with all leads & lift complete as per specification and as directed by the engineer of the work.
17.554
11496
201804.82142
... More
code12 - Providing and laying in position Cement Concrete M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete with all leads & lift complete as per specification and as directed by the engineer of the work.
2.0286
11611
23554.48032
... More
code13 - Providing and laying in position Cement Concrete M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete with all leads & lift complete as per specification and as directed by the engineer of the work.
30.489
10777
328602.20997
... More
code14 - Providing and laying in position Cement Concrete M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete with all leads & lift complete as per specification and as directed by the engineer of the work.
3.5178
10885
38293.0119
... More
code15 - Providing and laying in position Cement Concrete M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete with all leads & lift complete as per specification and as directed by the engineer of the work.
0.81
10418
8438.9607
... More
code16 - Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete with all leads & lift complete as per specification and as directed by the engineer of the work.
71.279
8367
596424.18134
... More
code17 - Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete with all leads & lift complete as per specification and as directed by the engineer of the work.
7.46
8451
63045.3552
... More
code18 - Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work
52.092
1095
57066.26508
... More
code19 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete with all leads & lift complete as per specification and as directed by the engineer of the work.
9.11
93929
855700.8424
... More
code20 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete with all leads & lift complete as per specification and as directed by the engineer of the work.
0.683
94869
64795.62262
... More
code21 - Providing and laying Vitrified tiles 600x600 with thickness 9-10 mm in differentsizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete with all leads & lift complete as per specification and as directed by the engineer of the work.
143.225
1233
176703.84375
... More
code22 - Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser, treads of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints complete with all leads & lift complete as per specification and as directed by the engineer of the work.
12.424
1231
15302.0196
... More
code23 - Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make,in all colours, shades except burgundy, bottle green, black of any size asapproved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) andjointing with grey cement slurry @ 3.3kg/m2, including pointing in white cement mixed with pigment of matching shade complete with all leads & lift complete as per specification and as directed by the engineer of the work.
13.739
1161
15955.1007
... More
code24 - Providing and laying Ceramic glazed floor tiles of size 300x300 mm thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete with all leads & lift complete as per specification and as directed by the engineer of the work.
2.25
933
2100.2625
... More
code25 - Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete with all leads & lift complete as per specification and as directed by the engineer of the work.
1.799
1521
2737.08855
... More
code26 - Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete with all leads & lift complete as per specification and as directed by the engineer of the work.
80.592
5594
450863.8848
... More
code27 - Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete with all leads & lift complete as per specification and as directed by the engineer of the work.
4.23
4133
17486.1855
... More
code28 - Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete with all leads & lift complete as per specification and as directed by the engineer of the work.
568.91
253
143962.6755
... More
code29 - Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete with all leads & lift complete as per specification and as directed by the engineer of the work.
50.496
255
12905.76768
... More
code30 - Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete with all leads & lift complete as per specification and as directed by the engineer of the work.
196.9852
221
43642.07106
... More
code31 - Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete with all leads & lift complete as per specification and as directed by the engineer of the work.
26.046
223
5828.05296
... More
code32 - Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete with all leads & lift complete as per specification and as directed by the engineer of the work.
251.852
389
98108.9466
... More
code33 - Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete with all leads & lift complete as per specification and as directed by the engineer of the work.
166.046
393
65330.7987
... More
code34 - Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms c/c both horizontally and vertically fixed with chicken mesh for drop chajja, facia, backing to cup boards including cost of all materials, labour, providing and removing form work HOM curing, complete with all leads & lift complete as per specification and as directed by the engineer of the work.
18.738
1299
24357.5262
... More
code35 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc complete with all leads & lift complete as per specification and as directed by the engineer of the work.
310.5
192
59662.575
... More
code36 - Providing and fixing of 2track 2panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2 (Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets grey color having isolated drainage and reinforced with Galvanized Iron profile through out the window frame. The outer frame having an overall size of 44mm width 40mmheight with reinforcement of 1mm thickness and Sash with overall size of 27mm x 53mm with UPVC honeycomb structure inside in lieu of GI reinforcement. Coextruded Glazing bead for fixing of glass shall be of size 9.5mm x 21.5mm. Windows shall be provided with 5mm plain float glass, standard hardware and single point locking system with Crescent Locks. Wall thickness of frame and sash shall be of 2 mm. Maximum possible size 1219mm x 1219mm. (The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made complete with all leads & lift complete as per specification and as directed by the engineer of the work.
12.42
5274
65504.943
... More
code37 - Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, nterlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation com- plete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.20 mm M.S. laths with 1.20 mm thick top cover including cost of materials, labour, usage charges of machinery complete with all leads & lift complete as per specification and as directed by the engineer of the work.
33.12
2628
87044.328
... More
code38 - Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete with all leads & lift complete as per specification and as directed by the engineer of the work.
2.52
4748
11967.2784
... More
code39 - Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
765.8952
133
102132.12492
... More
code40 - Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete with all leads & lift complete as per specification and as directed by the engineer of the work.
76.542
134
10308.67656
... More
code41 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete with all leads & lift complete as per specification and as directed by the engineer of the work.
765.8952
105
80418.996
... More
code42 - Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete with all leads & lift complete as per specification and as directed by the engineer of the work.
251.852
163
41253.3576
... More
code43 - Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete with all leads & lift complete as per specification and as directed by the engineer of the work.
184.784
165
30570.66496
... More
code44 - Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete with all leads & lift complete as per specification and as directed by the engineer of the work.
129.24
120
15605.73
... More
code45 - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering,complete with all leads & lift complete as per specification and as directed by the engineer of the work.
235.608
279
65805.3144
... More
code46 - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints complete with all leads & lift complete as per specification and as directed by the engineer of the work.
240.2432
866
208153.915776
... More
code47 - Providing and laying in position plain cement Mix 1 3 6 (M10) Using 20 mm nominal size graded crushed coarse aggregates concrete for levelling course for all works in oundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete with all leads & lift complete as per specification and as directed by the engineer of the work.
24.992
6593
164775.50496
... More
code48 - Providing and fixing on wall face unplasticised Rigid PVC rain Water pipes Conforming IS 13592 Type A including jointing with seal ring conforming IS 5382, leaving 100mm gap for thermal expansion. (i) Single socketed pipes 100mm dia complete with all leads & lift as per specification and directions of the Engineer-in-charge of the work.
18.799
305
5744.03445
... More
code49 - Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes25 mm conforming to having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete with all leads & lift complete as per specification and as directed by the engineer of the work. (Concealed work including cutting chases and making good walls)
20
469
9387
... More
code50 - Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes 32mm conforming to having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete with all leads & lift complete as per specification and as directed by the engineer of the work (external work).
20
390
7812
... More
code51 - Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes 20mm conforming to having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete with all leads & lift complete as per specification and as directed by the engineer of the work (Concealed work including cutting chases and making good walls)
10
397
3979.5
... More
code52 - Supplying PVC pipes 50mm dia., 6 kg/sqcm & class 5 ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete with all leads & lift complete as per specification and as directed by the engineer of the work.
20
106
2121
... More
code53 - Providing and placing on terrace,( at all Floor Levels) polyethylene water storage tanks as per IS 12701 marked,with cover and suitable locking arrangements, making necessary holes for inlet, outlet and over flow pipes, but withoutfittings and base support for tank. complete with all leads & lift complete as per specification and as directed by the engineer of the work.
1000
9
9450
... More
code54 - Providing and fixing brass Stop cock of approved quality 20mm complete with all leads & lift complete as per specification and as directed by the engineer of the work.
3
320
960.75
... More
code55 - Providing and fixing brass big cock of approved quality 20mm complete with all leads & lift complete as per specification and as directed by the engineer of the work.
2
320
640.5
... More
code56 - Providing and fixing Pillar Cock made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy complete with all leads & lift complete as per specification and as directed by the engineer of the work.
1
1284
1284.15
... More
code57 - Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete complete with all leads & lift complete as per specification and as directed by the engineer of the work.
4
231
924
... More
code58 - Providing and fixing White Vitreous China Wash basin size 550x400 mm with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: complete with all leads & lift complete as per specification and as directed by the engineer of the work.
2
3009
6018.6
... More
code59 - Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete with all leads & lift complete as per specification and as directed by the engineer of the work.
441
593
261623.25
... More
code60 - Providing and fixing Stainless Steel A ISI 304 without drain board (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :610x510 mm bowl depth 200 mmcomplete with all leads & lift complete as per specification and as directed by the engineer of the work.
1
3806
3806.25
... More
code61 - Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete with all leads & lift complete as per specification and as directed by the engineer of the work.
3
96
289.8
... More
code62 - Concealed Conduit : Supplying heavy gauge PVC Conduit Pipe 25 mm dia 2 mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. complete with all leads & lift complete as per specification and as directed by the engineer of the work.
250
82
20737.5
... More
code63 - Supplying PVC/GI flexible conduit pipe 25 mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completely. complete with all leads & lift complete as per specification and as directed by the engineer of the work.
20
23
462
... More
code64 - Supplying and flush mounting of 6 Way powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. complete with all leads & lift complete as per specification and as directed by the engineer of the work.
2
231
462
... More
code65 - Supplying and fixing 6 Module superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. complete with all leads & lift complete as per specification and as directed by the engineer of the work.
2
245
491.4
... More
code66 - Supplying and flush mounting of 10-12 Way powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. complete with all leads & lift complete as per specification and as directed by the engineer of the work.
6
334
2009.7
... More
code67 - Supplying and fixing 10-12 Module superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.complete with all leads & lift complete as per specification and as directed by the engineer of the work.
6
361
2167.2
... More
code68 - Supplying and flush mounting of 18 Way powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.complete with all leads & lift complete as per specification and as directed by the engineer of the work.
3
425
1275.75
... More
code69 - Supplying and fixing 18 Module superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. complete with all leads & lift complete as per specification and as directed by the engineer of the work.
3
479
1439.55
... More
code70 - Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multistrand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Short point up to 3Mtr from tapping point to out let via switch. complete with all leads & lift complete as per specification and as directed by the engineer of the work.
10
282
2824.5
... More
code71 - Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multistrand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch.complete with all leads & lift complete as per specification and as directed by the engineer of the work.
10
397
3979.5
... More
code72 - Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multistrand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr up to 10Mtr from tapping point to out let via switch. complete with all leads & lift complete as per specification and as directed by the engineer of the work.
22
582
12820.5
... More
code73 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper with low conductor resistance single core wirein open or concealed system of wiring with specified IS-694;1990 & confirming to GTP of GROUP-A 1.5 SQMM. complete with all leads & lift complete as per specification and as directed by the engineer of the work.
300
27
8190
... More
code74 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper with low conductor resistance single core wirein open or concealed system of wiring with specified IS-694;1990 & confirming to GTP of GROUP-A 2.5 SQMM. complete with all leads & lift complete as per specification and as directed by the engineer of the work.
500
44
22050
... More
code75 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper with low conductor resistance single core wirein open or concealed system of wiring with specified IS-694;1990 & confirming to GTP of GROUP-A 4 SQMM. complete with all leads & lift complete as per specification and as directed by the engineer of the work.
180
66
11907
... More
code76 - Supplying and fixing of 6Amps one way switch on existing modular switch plate as per IS 3854 and IS 1293. complete with all leads & lift complete as per specification and as directed by the engineer of the work.
50
107
5355
... More
code77 - Supplying and fixing of 6Amps 3Way socket on existing modular switch plate as per IS 3854 and IS 1293. complete with all leads & lift complete as per specification and as directed by the engineer of the work.
16
179
2872.8
... More
code78 - Supplying and fixing of 16A One Way Switch on existing modular switch plate as per IS 3854 and IS 1293. complete with all leads & lift complete as per specification and as directed by the engineer of the work.
4
189
756
... More
code79 - Supplying and fixing of 6/16A Universal Socket on existing modular switch plate as per IS 3854 and IS 1293. complete with all leads & lift complete as per specification and as directed by the engineer of the work.
4
247
991.2
... More
code80 - Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size …110…mm conduit using necessary machine screws.
50
22
1102.5
... More
code81 - Supplying of 1 x 4 feet PVC Batten with integrated LED tube 20/22Watts with high quality diffuser with Life of 25000 burning hours and 70 percent lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz and Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. complete with all leads & lift complete as per specification and as directed by the engineer of the work.
30
759
22770
... More
code82 - Fixing all types and all capacities of fluorescent/false ceiling/spot light/CFL /LED fittings indoor on the wall / ceiling/ rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Raffer / Girders. complete with all leads & lift complete as per specification and as directed by the engineer of the work.
30
134
4026
... More
code83 - Supplying capacitor type ceiling fan complete with downrod blades, shackle, canopies etc, for operation on 230V, 50cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48 Sweep (1200 mm) Regular model.complete with all leads & lift complete as per specification and as directed by the engineer of the work.
10
3282
32824
... More
code84 - Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and S hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. complete with all leads & lift complete as per specification and as directed by the engineer of the work.
10
346
3465
... More
code85 - Supplying exhaust fan of 1440 RPM of 300 mm (12) size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. complete with all leads & lift complete as per specification and as directed by the engineer of the work.
1
1641
1641.2
... More
code86 - Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. complete with all leads & lift complete as per specification and as directed by the engineer of the work.
1
777
777.7
... More
code87 - Supplying and fixing of 8 Way SP & N regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure. I - Single Door.
4
1566
6266.4
... More
code88 - Supplying and fixing 6-32 Amps SP miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required.confirming to IEC 60898.
13
435
5664.75
... More
code89 - Supplying and fixing 6-32 Amps DP miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required.confirming to IEC 60898.
9
775
6983.55
... More
code90 - Supply and Installation / Fixing / Provision of 300 mm x 300 mm x 214 mm Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cut-out with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility.
4
4737
18950.4
... More
code91 - Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter.
4
1449
5796
... More
code92 - Supplying & fixing of 32 Amps Porcelain fuse channel with cut out on existing wooden/ panel using necessary nuts, bolts and washers. complete with all leads & lift complete as per specification and as directed by the engineer of the work.
4
253
1012.2
... More
code93 - Three Phase Distribution Box for 6 Connection. complete with all leads & lift complete as per specification and as directed by the engineer of the work.
2
2521
5042.1
... More
code94 - Installation of Distribution box suitable for 6, 3 Phase Connection. complete with all leads & lift complete as per specification and as directed by the engineer of the work.
2
947
1894.2
... More
code95 - 1.1 kV, 16 Sqmm, 4 Core, (11 GI Strips - 4 0.8 mm) XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. complete with all leads & lift complete as per specification and as directed by the engineer of the work.
0.08
148934
11914.728
... More
code96 - Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. All kinds of soils. Depth upto 1.50 m(80mtrs length x 0.5Mtr width x 1Mtr depth = 40Cmt). complete with all leads & lift complete as per specification and as directed by the engineer of the work.
40
275
11004
... More
code97 - Laying of 2.5 to 25 Sqmm LT UG cable in Existing Trench GI pipe Stone Ware RCC Hume pipe using Wooden Aluminum Rollers as directed by the departmental staff. complete with all leads & lift complete as per specification and as directed by the engineer of the work.
0.08
21930
1754.424
... More
code98 - Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications. (80mtrs length x 0.5Mtr width x 1Mtr depth = 40Cmt). complete with all leads & lift complete as per specification and as directed by the engineer of the work.
40
168
6720
... More
code99 - Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, Up to 4C x 50 Sqmm LT UG Cable. complete with all leads & lift complete as per specification and as directed by the engineer of the work.
2
340
680.4
... More
code100 - Brass Cable Gland 25mm. complete with all leads & lift complete as per specification and as directed by the engineer of the work.
4
82
331.8
... More
code101 - GI Heavy-Duty pipes 40mm dia.. complete with all leads & lift complete as per specification and as directed by the engineer of the work.
6
342
2053.8
... More
code102 - Aluminium End Terminal (Lug) 16 Sqmm. complete with all leads & lift complete as per specification and as directed by the engineer of the work.
20
2
42
... More
code103 - supplying, fixing , wiring, earth electrode for grounding conduits. I.C, cutouts and other equipments on the meter board using 40mm dia 2.90 mm thick GI pipe 2.5 mtr long buired in a pit… The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc. is to be established through GI wire of size as per ISI specification 7.3.3 of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc. the pipe shall have 16 through holes of 122 mm dia. complete with all leads & lift complete as per specification and as directed by the engineer of the work.
4
3685
14742
... More
code104 - 8 SWG GI Wire. complete with all leads & lift complete as per specification and as directed by the engineer of the work.
0.03
78792
2363.76
... More
code105 - 1.1 KV Class PVC Wire - 16 Sqmm Al Wt: 4.2 Kg, Total Wt: 7.5 Kg/100 Mtr Coil HR (Heat Resistant) PVC Insulated & UnSheathed Aluminium Wires Multistrand Single Core Lead wires as per IS-694: 2010. complete with all leads & lift complete as per specification and as directed by the engineer of the work.
1
3719
3719.1
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements