Agricultural Produce Market Committee Tender

KSRB 2.5 : Earthwork excavation ( in deposited soil ) and filling sides of foundation upto plinth in layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming after watering including cost of all labour complete as per specifications. with all lead and lift etc., complete as directed by the Engineer-In-Charge of the work.

KSRB 4-1.3 : Providing and laying in position plain cement concrete of mix 1:4:8 using 40mm and down size graded granite metal, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation and plinth, including cost of all materials, labour, HOM of machinery, curing complete as per specifications. with all lead and lift etc., complete as directed by the Engineer-In-Charge of the work.

KSRB 4-1.6: Providing and laying in position plain cement concrete of mix 1:2:4 with OPC cement @240Kgs, with 20mm and down size graded granite metal coarse aggregate @ 0.69 Cum and fine aggregate @ 0.459Cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation ,plinth and cills, including cost of all materials, labour, HOM of machinery, curing complete as per specifications. with all lead and lift etc., complete as directed by the Engineer-In-Charge of the work.

KSRB 4.2.2 : Providing and laying in position reinforced cement concrete of mix M20 with OPC cement @ 320kgs with 20mm and down size graded granite metal coarse aggregate @0.878cum and fine aggregate @ 0.459cum, with superplasisteres @3lts confirming to IS9103-1990 Reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in foundation plinth and ground floor level for roof slabs, staircase,lintels, retaining walls, return walls, walls (any thickness) including attached plasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window cills, fillets etc., including cost of all materials, labour, HOM of machinery, curing, complete as per specifications. with all lead and lift etc., complete as directed by the Engineer-In-Charge of the work.

KSRB 4.2.8 : Providing and laying in position reinforced cement concrete of design mix M20 with OPC cement @320Kgs, with 20mm and down size graded granite metal coarse aggregate @0.69cum and fine aggregate @ 0.46cum with superplastisiser @3ltrs confirming to IS 9103-1999 Reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for for all works in ground floor level for roof slabs, staircase, lintels and beams retaining walls, return walls, walls (any thickness) including attached pillasters, Columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window cills, fillets etc., including cost of all materials, labour, HOM of machinery, curing, complete as per Specifications (Excluding cost of steel, fabrication & plastering charges) with all lead and lift etc., complete as directed by the Engineer-In-Charge of the work.

KSRB 4-5 : Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixing chicken mesh for drop chajja, facia, backing to cup boards including cost of all materials, labour, providing and removing form work HOM of machineries, curing, complete as per specifications with all lead and lift etc., complete as directed by the Engineer-In-Charge of the work.

KSRB 4-6.3 : Providing and removing centering, shuttering, strutting, propping etc.,and removal of form work for flat surface such as suspended floors, roofs, landings, balconies and likes, thickness above 200 mm including cost of all materials, labour complete as per specificaiton. with all lead and lift etc., complete as directed by the Engineer-In-Charge of the work.

KSRB 4-6.4 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttresses, plinth and string courses cost of all materials, labour complete as per specificaitons. with all lead and lift etc., complete as directed by the Engineer-In-Charge of the work.

KSRB 4.9.2 : Providing TMT Steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM of machinery complete as per specifications. with all lead and lift etc., complete as directed by the Engineer-In-Charge of the work.

Providing and fixing RCC slabs 5 cms thick for wall shelves with 12mm and down size jelly cement concrete design mix M20 including CM 1:3 plaster finishing, curing etc., complete (excluding the cost of steel and fabrication charges) with all lead and lift etc., complete as directed by the Engineer-In-Charge of the work.

KSRB 5.2-3 : Providing and constructing granite / trap / basalt size stone masonry in foundation cement mortar 1:6, stone hammerd dressed in courses not less than 20 cms high, bond stones at two m. apart in each course including cost of materials, labour, curing complete as per specifications. with all lead and lift etc., complete as directed by the Engineer-In-Charge of the work.

KSRB 6-5.3 : Providing and constructing burnt brick masonry with approved quality of modular bricks of standard size of class designation 5.0 Newton per sqmm (table moulded) with cement mortar 1:6 for basement and superstructure including cost of materials, labour charges, scaffolding, curing complete as per specifications.with all lead and lift etc., complete as directed by the Engineer-In-Charge of the work.

KSRB 7.1 : Providing and fixing in position collapsible steel shutters with single or double leaf with vertical channel 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size, with top and bottom rails of T iron sections of 40x40x6 mm with 38mm dia steel pulleys complete with bolt and nuts, locking arrangements, stoppers, handles on both sides with 7.5cms openings at 10 cms. c to c applying a priming coat of red lead paint. cost of materials, labour, HOM of machinery complete as per specifications. size of gate 2.4mx1.4m with all lead and lift etc., complete as directed by the Engineer-In-Charge of the work.

KSRB 7.5 : Providing and fixing pull and push type rolling shutters of approved make out of 18 guage, 75mm wide cold rolled steel laths of convex corrugation, with side guides and bottom rail, with interlocking arrangements for steel laths by means of alternate clips, suspension shaft with High tension coil type springs two numbers, mounted on specially designed pipe shaft, with bracket plates, guide channels, ball bearing arrangements, for inside & outside locking with push & pull operations complete including pulling hooks, 4Nos. handles with all fittings and accessories, painted with a coat of red lead paint (without top cover) cost of materials, labour, HOM of machinery complete as per specifications. Shutter size 3mx2.8 m. with all lead and lift etc., complete as directed by the Engineer-In-Charge of the work.

KSRB 7.6 : Providing and fixing top covers made out of 20 guage M.S. sheet over pull and push rolling shutters bent to shape including cost of red lead primer coat of painting , materials, labour, HOM of machinery complete as per specifications. with all lead and lift etc., complete as directed by the Engineer-In-Charge of the work.

KSRB 7.7 : Providing and fixing in position in cement concrete 1:3:6 steel glazed windows and ventilators side hung/top hung fully openable as per approved drawings using Z angles of 25x33x3mm, weighing 1.419 Kg/m both for outer and inner frames and central mullion section of size 25x46x3mm. weighing 2.28Kg/m duly providing T section 19x19x3mm weighing 0.839 kg/m for glazing of windows not more than 34 cms. c to c including providing and fixing 4mm. thick reeded glass with teakwood beading of required size, all steel sections should confirm to I.S 7452:1990, 4nos. of holdfasts of approved size, section should be cut to length welded and electrically grinded subdividing frames of unit shall be tenonned and revetted into the frames electrically. All the steel surface shall be throughly cleaned free of rust and painted with one coat of anti-corosive paint and finishing with two coats of ready mix paint of approved colour and make including cost of materials, fixtures, labour and HOM of machinery complete as per specifications. with all lead and lift etc., complete as directed by the Engineer-In-Charge of the work.

KSRB 7.9 : Providing and fixing M.S.grill work for windows and ventilators weighing 21kg/sqm using M.S. flats, or M.S. square rods, or combination of M.S. flats and square rods as per approved design, drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer, cost of materials, fixtures, labour and HOM of machinery complete as per specifications. with all lead and lift etc., complete as directed by the Engineer-In-Charge of the work.

Supplying and fixing pressed steel door frames size 125x65mm manufactured from 1.25mm thick carbon steel of imported steel strips with mitred joints at 90 degree for door openings and shutters made out of seasoned Honne wood, styles of 30mm thick with lofk rail of 160mm width, top and side rails of 100mm width and bottom rails of 250 mm width and panel filling with 12mm thick particle board of exterior grade bonded with phenol formal dehide resin and the shutters shall be rot proof, vermin proof, heat resistant guaranteed against shrinkage, warpage and such other defects for a period of 3 years . This shall be as per approved drawings, specification and direction including cost of conveyance, manufacturing, painting with enamel paint 2 coats over primer coat, cost of labour for all items of work, machinery, equipment and all other incidental charges with all lead, lift, loading and unloading etc., complete. The Hollow portion of frame to be filled with cement concrete 1:2:4 with all lead and lift etc., complete as directed by the Engineer-In-Charge of the work.

KSRB 8.6-6 : Providing and fixing on wall surface 2.5kg / sq.cm H.D.P.E. rain down water pipes 110mm outer dia approved make and brand with necessary specials like shoes, bends and offsets fixed with iron clamps, wall plugs, screws, including cost of materials, labour, curing complete as per specifications. 110mm Outer Dia with all lead and lift etc., complete as directed by the Engineer-In-Charge of the work.

Providing and installing of pre painted Galvalume Iron Trapezoidal Profiled sheet of approved make 1060 mm width (1000 mm cover width) 28-30 mm crest height with crest distance 200 mm c/c with 2 ribs at the centre for stiffening. The total coated thickness (TCT) of the sheet will be 0.47 mm + or - 0.02 mm tolerance Zinc-alu Alloy coating AZ 150 gsm as per ASTM 1397/A755-550 mpa steel grade, 5-7 micron epoxy primer on both side of the sheet and polyester top coat 20-22 mm microns using self drilling / self tapping screws of 25 mm length to be fixed over the existing purlins, rafters, channels and trusses with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

KSRB 10-3 : Providing and laying integral cement based waterproofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc., consisting of following application. (a)Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with proprietary water proofing compound conforming to IS:2645 over the RCC slab after cleaning the surface before treatment. (b)Laying cement concrete using broken brick bats 25mm to 100mm size with 50% of cement mortar 1:5 admixed with proprietary water proofing compound conforming IS:2645 over 20mm thick layer of cement mortar 1:5 admixed with proprietary water proofing compound to required slope and treating similarly the adjoining walls upto 300mm height including rounding off junctions of walls and slabs. (c)After two days of proper curing, applying a second coat of cement lurry admixed with proprietary water proofing compound (d)Finishing the surface with 20mm thick jointless cement mortar of mix 1:4 admixed with proprietary water proofing compound and finally finishing the surface with trowel and neat cement slurry and making of 300x300mm square. (e)The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test including cost of materials, labour complete as per specifications. with all lead and lift etc., complete as directed by the Engineer-In-Charge of the work.

KSRB13-3.9 : Providing and fixing in trenches galvanised / mild steel tubes (medium grade) 100mm dia nominal bore with all fittings ( earth work in trenches to be measured and paid for separately ) including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications. with all lead and lift etc., complete as directed by the Engineer-In-Charge of the work.

KSRB 14.10-1: Flooring with 25mm to 40mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications with all lead and lift etc., complete as directed by the Engineer-In-Charge of the work.

KSRB15-3.5 : Providing 15mm thick cement plaster in single coat with cement mortar 1:4, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications(2014-15 SR Page No.109, Item No.15.13) KSRB15-7 : Providing lime rendering for plastering to wall and ceiling , including cost of materials, labour, curing complete as per specifications with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

KSRB15-3.9 : Providing 18mm thick cement plaster in single coat with cement mortar 1:6 to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications with all lead and lift etc., complete as directed by the Engineer-In-Charge of work. with all lead and lift etc., complete as directed by the Engineer-In-Charge of the work.

KSRB15-3.10 : Providing 20mm thick cement plaster in single coat with cement mortar 1:3, to stone / concrete including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

KSRB15-3-13 : Providing 12mm thick cement plaster in single coat with cement mortar 1:3, to ceiling including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications with all lead and lift etc., complete as directed by the Engineer-In-Charge of the work.

Providing and finishing external walls in two coats over one coat 100% acrylic silicon glazed primer with antifungal paint top coat of approved brand and shade to give an even shade after thoroughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications with all lead and lift etc., complete as directed by the Engineer-In-Charge of the work.

KSRB 15-14.1 : Providing and applying two coats with oil bound washabledistemper of approved brand and shade on wall surface including priming coat with distemper primer after throughly brooming the surface free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

KSRB 15-18.2 : Providing and applying enamel metal paint two coats (excluding priming coat) over new steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter,including cost of materials, labour, complete as per specifications with all lead and lift etc., complete as directed by the Engineer-In-Charge of work.

Dismantling burnt brick masonry in clay mortar/lime mortar/cement mortar and stacking the bricks within a radius of 50m and removing the debris to a distance upto 200m. with all lead and lift etc., complete as directed by the Engineer-In-Charge of the work.

Dismantling size stone masonry in clay mortar and stacking the size stone within a radius of 50m and removing the debris to a distance upto 200m. with all lead and lift etc., complete as directed by the Engineer-In-Charge of the work.

Construction of laterite size stone masonry in C M 1:6 using available stone curing etc complete as per sepcification. I.S 3620/1979 having compressive strength not less the 3.5 N/mm2 for saturated dry samples FOR FOUNDATION (Cement = 45 kg) with all lead and lift etc., complete as directed by the Engineer-In-Charge of the work.

Construction of laterite size stone masonry in C M 1:6 using available stone curing etc complete as per sepcification. I.S 3620/1979 having compressive strength not less the 3.5 N/mm2 for saturated dry samples FOR BASEMENT (Cement = 45 kg) with all lead and lift etc., complete as directed by the Engineer-In-Charge of the work.