Agricultural Produce Market Committee Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Agricultural Produce Market Committee - APMC Tender
Civil And Construction
Civil Works Others
Opening Date25 Nov 2024
Closing Date30 Dec 2024
Tender Amount₹ 1,40,57,688.27
Costs
EMD
₹ 2,10,900Document Cost
Refer DocumentsTender Fee
₹ 3,520
Summary
Providing Conversion Of 05 Nos Old Covered Auction Platform Into Godowns With Electrification Construction Of Remaining Road With Drain And Deckslab At Rear Side Of The Yard In Ajjampura Sub Market Yard, Construction Of Gate For 2nd Main Road Entrance And Concrete Road At 2nd Cross Road Remaining Portion In Shivani Sub Market Yard Construction Of Cover Slab For Road Side Drain At 2nd & 3rd Main Road In Main Market Yard Of A.p.m.c Tarikere 2024-25 Action Plan
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
APMC/2024-25/RD/WORK_INDENT373Tender No
APMC/2024-25/RD/WORK_INDENT373Tender Authority
Agricultural Produce Market Committee ViewPurchaser Address
-Website
http://www.arthapedia.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
apmctke04 - Providing and laying in position cement concrete M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates. for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
35.604
8553
304542.3744
... More
apmctke05 - Providing and laying in position cement concrete M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates. for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
173.655
6652
1155291.984
... More
apmctke06 - Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
3
138
414
... More
apmctke07 - Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
199.921
7978
1594969.738
... More
apmctke08 - Providing and laying in position cement concrete M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
0.993
6843
6795.099
... More
apmctke09 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
12.708
79011
1004071.788
... More
apmctke10 - Compacting Original Ground, Compacting original ground supporting embankment Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction. etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
67.2
105
7056
... More
apmctke11 - Construction of Granular Sub-Base Grading -V Material of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
171.6
2487
426769.2
... More
apmctke12 - Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 14:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 140 kg/ m3, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 7 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 t vibratory roller, finishing and curing etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
120.15
4920
591138
... More
apmctke13 - Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, , primer, sealant , curing of concrete slabs for 14-days, and water finishing to lines and grade as per drawing and technical specification clause 1501 loading & unloading charges, cost and conveyance of all materials, labour, equipments etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
205.8
6754
1389973.2
... More
apmctke14 - Providing and fixing in position 25mm dia dowel bars precoated with anticorrosive epoxy paint of required Dia. 600 mm. Long and at 300 mm. C/C and wherever directed including handling, straightening, necessary cutting supported by TMT , chairs with proper alignment by using properly designed assembly of Bulkheads lubricating half length with bituminous paint etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
360
380
136800
... More
apmctke15 - Providing and fixing in position, tie bars precoated with anti corrosive epoxy paint of 12 mm dia. 700 mm. long and at 300 mm. C/C and wherever directed including handling, straightening wrapping with paper of approved quality for half length, necessary cutting, handling, straightening , supported by assembly of TMT , chairs with proper alignment etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
316
270
85320
... More
apmctke16 - Providing and laying 100mm thick factory made precast M -40 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS15658 for Commercial Traffic Axle load repetitions more than 10MSA upto 20MSA for Industrial Streets, Bus & Truck parking of approved shape and colour, laid in required pattern and including over 40mm thick compacted bed of coarse sand, filling the joints with fine sand (WMM/WBM Base to be paid separately as per relevant technical specification) etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
172.5
1300
224250
... More
apmctke17 - Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage & all other appurtenaces required etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
35.7
474
16921.8
... More
apmctke18 - Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
4.134
1663
6874.842
... More
apmctke19 - Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
240.84
37
8911.08
... More
apmctke20 - Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material to the appropriate disposal area G.S. Sheet. etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
1038.46
109
113192.14
... More
apmctke21 - Providing and laying in position Cement Concrete M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
37.329
9430
352031.1345
... More
apmctke22 - Providing and laying in position Cement Concrete M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. Thecost includes cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
13.778
10608
146157.024
... More
apmctke23 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
2.53
89457
226326.21
... More
apmctke24 - Providing and laying in position Cement Concrete Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
157.59
6243
983834.37
... More
apmctke25 - Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
180.54
2633
475361.82
... More
apmctke26 - Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) including cost of materials, labour, usage charges of machinery etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
491.4
107
52579.8
... More
apmctke27 - Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes including cost of materials, labour, usage charges of machinery etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
23.4
912
21340.8
... More
apmctke28 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
3568.3199
168
599477.7432
... More
apmctke29 - Providing and Fixing Chicken Mesh etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
240.84
12
2890.08
... More
apmctke30 - Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
240.84
241
58042.44
... More
apmctke31 - Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
944.58
371
350439.18
... More
apmctke32 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
1247.83
279
348144.57
... More
apmctke33 - Finishing walls with water proofing cement paint - with primer. of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labouretc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
1097.76
89
97700.64
... More
apmctke34 - Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
1247.83
137
170952.71
... More
apmctke35 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
984.1499
167
164353.0333
... More
apmctke36 - Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineerin- charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.with all lead and lift etc.,complete as directed by the Engineer-In-Charge of the work.
1160.23
568
659010.64
... More
apmctke37 - Providing and fixing precoated galvanised steel sheet roofing accessories Ridges plain (500 - 600mm) 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
91.36
451
41203.36
... More
apmctke38 - Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter (0.63 mm thick with zinc coating not less than 275 g/m²) with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
182.72
645
117854.4
... More
apmctke39 - Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest amendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bends, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used. For Grade PE80 PN6.0. etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
310
469
145390
... More
apmctke40 - Providing and laying in position cement concrete Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates. for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
0.786
5664
4451.904
... More
apmctke41 - Providing and laying in position Cement Concrete M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. Thecost includes cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
2.005
11271
22598.355
... More
apmctke42 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
2810.5
147
413143.5
... More
apmctke43 - Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse sand) proportion cut to required shape, pattern with paper joints, finished with cement mortal using white cement and colour pigments to match the colour of slab making through jointing with sealant, making holes 25mmx12mm grooves in joints including cost of all materials, mortar, labour, curing etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
17.427
3359
58537.293
... More
apmctke44 - Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & columns/beams with necessary aluminium frame works at required level made out of 50x25x4mm C section or equivalent. The panel should consist of 3mm thick non-halogenated FR grade mineral based polymer ( 2 hrs fire resistance as per ASTM E119-12 and clause B, S1, do as per ENT 13501-1sandwiched between 0.50 skins thick aluminium sheet making a total panel thickness of 4mm. The surfaces will be finished with PVDF based coating on topsides and service coating on reverse sides would be in polyester paint. The system shall be fixed using GI brackets, aluminium L cleats and stainless steel bolts and nuts complete with spring washer and cap nuts and all other necessary accessories, sealing shall be done with necessary rods etc., complete For Curved Portion etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
12.86
4744
61007.84
... More
apmctke45 - Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & columns/beams with necessary aluminium frame works at required level made out of 50x25x4mm C section or equivalent. The panel should consist of 3mm thick non-halogenated FR grade mineral based polymer ( 2 hrs fire resistance as per ASTM E119-12 and clause B, S1, do as per ENT 13501-1sandwiched between 0.50 skins thick aluminium sheet making a total panel thickness of 4mm. The surfaces will be finished with PVDF based coating on topsides and service coating on reverse sides would be in polyester paint. The system shall be fixed using GI brackets, aluminium L cleats and stainless steel bolts and nuts complete with spring washer and cap nuts and all other necessary accessories, sealing shall be done with necessary rods etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.complete as directed by the Engineer-In-Charge of the work.
41.39
3989
165104.71
... More
apmctke46 - Supplying heavy gauge PVC conduit pipe 19/20 mm dia 2 mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary etc., complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
500
66
33000
... More
apmctke47 - Supplying heavy gauge PVC conduit pipe19/25 mm dia 2 mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
250
78
19500
... More
apmctke48 - Supplying and flush mounting 10" x 7" x 3" (254 x 178 x 76 mm) teak wooden box without front plank, made of not less than12 mm thick wood, after due groove cutting, finishing with necessary cement plastering etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
80
112
8960
... More
apmctke49 - Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws. etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
18720
-
7675.2
... More
apmctke50 - Point wiring using copper wire with switch: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. Complete for each outlet. Short point upto 3Mtr from tapping point to out let via switch. etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
80
285
22800
... More
apmctke51 - Point wiring using copper wire with switch: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. Complete for each outlet. Medium point above Medium point above 3Mtr upto 6Mtr from tapping point to outlet via switch. etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
15
394
5910
... More
apmctke52 - Supplying 6A flush type socket and 6A 3/5 Way. flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3854- etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
110
147
16170
... More
apmctke53 - Supplying And fixing/replacing of 6/16/32A/6A SP Switch. electrical accessories on existing switch board. etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
110
55
6050
... More
apmctke54 - Supplying And fixing/replacing of 6/16/32A Pendant Holder. electrical accessories on existing switch board. etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
110
71
7810
... More
apmctke55 - Supplying And fixing/replacing of 6/16/32A Electronic Stepped Regulator. electrical accessories on existing switch board. etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
110
281
30910
... More
apmctke56 - Supplying And Fixing Metal Fan Box with Round Hook. etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
110
117
12870
... More
apmctke57 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, 2.5mm2. multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010, etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
500
42
21000
... More
apmctke58 - Supplying 4 mm thick white plastic plate and covering for junction boxes of size ...... mm conduit using necessary machine screws. etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
100
15
1500
... More
apmctke59 - Supplying and fixing 6-32 Amps DP. miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898, etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
10
739
7390
... More
apmctke60 - Supplying and fixing Double door 6 way SP&N regular MCB distribution boards on wall/wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
10
1791
17910
... More
apmctke61 - Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia. etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
5
3750
18750
... More
apmctke62 - Supplying of LED light fitting 1 X 4feet - PVC Batten with integrated LED tube - 20/22 WW with high quality diffuser with Life of 25000 burning hours & 70%lumen maintenance with CRI greaterthan 80. Power Input: 220-240V at 50/60Hz & Power factor greaterthan 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
100
690
69000
... More
apmctke63 - Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps. etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
100
122
12200
... More
apmctke64 - Supplying and fixing of Stepped Fan Regulator Two Module modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.
40
357
14280
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%