Agricultural Produce Market Committee Tender

APMC04 - Extra for washing the wall surface spoiled by smoke, soot, with clear water before sand papering the surface smooth including necessary repairs to scraches including cost of material, labour, with all leads and lifts complete as per specification and as directed by engineer in charge of the work.

APMC05 - Removing the glazed tiles in patches in area exceeding 10 tiles and not exceeding 5 sqm including removing old tiles preparing surfaces and laying or setting new or old tiles complete including cost of materials, excluding cost of tiles labour, with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC06 - Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC08 - Earth work excavation for Foundation by mechanical means for all kinds of soil, works, width & depth as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC08 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC09 - Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.

APMC10 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work

APMC11 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC12 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC13 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC14 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC15 - Supplying, fitting and placing TMT FE 550 / 550D including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC16 - Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/beams with necessary aluminium frame works at required level made out of 50x25x4mm C section or equivalent. The panel should consist of 3mm thick non-halogenated FR grade mineral based polymer ( 2 hrs fire resist- ance as per ASTM E119-12 and clause B, S1, do as per ENT 13501-1sand- wiched between 0.50 skins thick aluminium sheet making a total panel thickness of 4mm. The surfaces will be finished with PVDF based coating on topsides and service coating on reverse sides would be in polyester paint. The system shall be fixed using GI brackets, aluminium L cleats and stainless steel bolts and nuts complete with spring washer and cap nuts and all other necessary accessories, sealing shall be done with necessary rods etc., complete with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC17 - Providing and supplying aluminium extruded tubular and other alu- minium sections as per the architectural drawings and approved draw- ings of Chief Architect, GoK.The aluminium quality shall be as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).The weight of aluminium extruded section shall be taken for purpose of payment. with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC18 - Designing,fabricating,testing,protection,installing and fixing in position semi grid unitized system of structural glazing with open joints for linear as well as curvilinear portions of the building for all heights and all levels,including:(a) Structural analysis and design and preparation of shop drawings for the specified design loads conforming to IS875 part III the system must passed the proof test at 1.5 times design wind pressure without any failure),including functional design of the aluminum sections for fixing glazing panels of various thicknesses,aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts,clamps etc.structural and weather silicone sealants, flashings, fire stop barrier-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage andhazard including:(b)Fabricating and supplying serrated M.S. hot dip galvanised/Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc.to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316,of the required capacity and in required numbers.(c)Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory/work shop environment,including double sided spacer tape,setting blocks and backer rod,all of approved grade,brand and manufacture,as per the approved sealant design,within and all around the perimeter for holding glass.(d)Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions,to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.(e)Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom(if required), making necessary holes of required sizes and of required numbers etc. complete.This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units,Tand P,scaffolding and other incidental charges including wastages etc. enabling temporary structures and services, cranes or cradles etc.as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-incharge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.directed by the Engineer- in-Charge.

APMC19 - Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12-6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface 2 of approved colour and shade, an inner heat strengthned clear float glass 6mm thick,spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc.all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/workshop of the glass processor.(Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.18.2)For payment, only the actual area of glass on face 1 of the glass panels(excluding the areas of the grooves and weather silicone sealant) provided and fixed in position,shall be measured in m2.(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25-0.28) and U value of 3.0 to 3.3 W/ m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC20 - Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC21 - Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.

APMC22 - Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC23 - Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC24 - Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse sand) proportion cut to required shape, pattern with paper joints, finished with cement mortal using white cement and colour pigments to match the colour of slab making through jointing with sealant, making holes 25mmx12mm grooves in joints including cost of all materials, mortar, labour, curing etc., with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC25 - Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc.,with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC26 - Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC27 - Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry at 3.3kg/m2, including pointing in white cement mixed with pigment of matching shade complete. with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC28 - Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry at 3.3kg/m2, including pointing in white cement mixed with pigment of matching shade complete. with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work

APMC29 - Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC30 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC31 - Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC32 - Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance 1mm), with wall thickness 2.0 mm ( 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded.The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC33 - Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance 1mm), with wall thickness 2.0 mm (0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm ( 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC34 - Providing& fixing of Openable door made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the openable frame. The frame having overall size of 60mm x 55mm with GI reinforcement of 1mm thickness and openable sash with overall size of 60mm x 102mm and GI reinforcement of 2mm thickness. Coextruded glazing bead for fixing of glass shall be of size 20mmx34mm.windows shall be provided with 6mm plain float glass,Standard hardware with 2D/3D hinge Multipoint locking system with Handle. wall thickness of frame and sash shall be of 2mm-2.5mm. maximum possible size 900mm x 2400mm. (The cost is inclusive of all fixtures and separate charges for minor TandP's shall not be made)with all leads and lifts complete as per specification and as directed by the Engineer incharge of the work.

APMC35 - Providing& fixing of Openable door made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the openable frame.The frame having overall size of 60mmx55mm with GI reinforcement of 1mm thickness and openable sash with overall size of 60mmx102mm and GI reinforcement of 2mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 20mmx34 mm. Windows shall be provided with 6mm plain float glass, Standard hardware with 2D/3D hinge & Multi point locking system with Handle. Wall thickness of frame sash shall be of 2mm-2.5mm. Maximum possible size 900mmx2400mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC36 - Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC37 - Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofing treatment to the Existing Roof surface/Chajjas/Sunken portion of WC:Bathroom applied @ 1.2 l/per m2, having tensile strength greater than 1.5N/mm2, elongation greater than 300% with solid content not less than 60% in 2 coats including surface preparation, priming the surface with water based acrylic primer @0.1 l/m2, and spreading 60 gsm geotextile between two top coats completely as per specification. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. on existing surface with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC38 - Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofing treatment to the Existing Roof surface/Chajjas/Sunken portion of WC:Bathroom applied @ 1.2 l/per m2, having tensile strength greater than 1.5N/mm2, elongation greater than 300% with solid content not less than 60% in 2 coats including surface preparation, priming the surface with water based acrylic primer @0.1 l/m2, and spreading 60 gsm geotextile between two top coats completely as per specification. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. on existing surface with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC39 - Design,supplying,erecting testing and commissioning of passenger/ bed cum passenger hospital lift with speed of 1mtr per second,variable voltage variable frequency drive, with or without machine room for the available well size,operating at 415V3 phase 50 cycles AC supply, powder coated / stainless steel car entrance doors enclosures with suitable colour vinyl flooring,LED car illumination,emergencylight,intercom and fan as desired by the user,central opening side opening door with or without attendant operation 7 segment display buttons,call register indicator, firemandrive,ss handrails inside car, full length infrared curtain in car door, automatic rescue device with batteries, voice announcing in regional international languages, braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil works like fixing of guide rail,counter weight etc.The total product and services shall adhere to IS14665/2016 with latest amendments part/section 1 to 5 with regards to general guidelines of fire safety rated doors,MRLL beams,pressure switch,manual change over for doors during emergency,ARD of 10times with sufficient battery back up and standard dimensions of chair car and door openings for all sizes and capacities of lifts including fitness certificate and duly observing all other safety norms prescribed and adhere to CPWD specifications,PCB Norms, National Electricity Code (NEC), NBC-2016, IEC and Karnataka State Lifts, Escalators and Passengers Conveyers Act 2012 and Rules 2014.The Supplier shall be registered in Government Electrical Inspectorate in the State of Karnataka. with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC40 - Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC41 - Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC42 - Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC43 - Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required : Range of four squatting plates with 10 litre P.V.C. automatic flushing cistern with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC44 - Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work

APMC45 - Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC46 - Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC47 - Providing and fixing PTMT, push cock of approved quality and colour 15 mm nominal bore, 98 mm long, weighing not less than 75 gms with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC48 - Providing and fixing brass bib cock of approved quality : 20 mm nominal bore with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC49 - Providing and fixing brass Stop cock of approved quality : 20 mm nominal bore with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC50 - 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC51 - Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber 150 x 100 mm size P type With Non Modular common burnt clay bricks of designation 3.5 & with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC52 - Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :100 mm inlet and 100 mm outlet Sand cast iron S&S as per IS: 3989 with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC53 - Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes 25mm conforming to having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work). with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC54 - Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes 20 mm conforming to having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete. (external work).with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC55 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: PVC pipes 63mm dia., 6 kg/sqcm & class 3 with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC56 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: PVC pipes 110mm dia., 6 kg/sqcm & class 3 with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC57 - Supplying UNPLASTICISED PVC Pipes of SN 8, 250mm dia. conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. for: with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC58 - Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC59 - Supply and delivery at site special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated .160mm dia PVC couplers as per IG124/ 1984 with ISI mark and with its latest amendments 10.8.10 with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC60 - Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 160 mm dia PVC Elbows with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work

APMC61 - Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 160 mm dia PVC Tee with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC62 - Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay (non modular) bricks of class designation 3.5 with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC63 - Supplying of feet PVC Batten with integrated LED tube.with high quality diffuser with Life of 25000 burning hours 70 lumen maintenance with CRI 80. Power Input:220-240V @ 50/60Hz & Power factor-0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition.LED light fighting 1x4' 20/22w with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC64 - Fixing all types and all capacities of fluorescent / false ceiling/ spot light / CFL / LED fittings indoor on the wall / ceiling /rafters / girders using 23/0.0076” twin twisted PVC insulatedwires, required Nos of round blocks and clamps.On wall/ ceiling / Rafter / Girders with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC65 - Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 12" Sweep (300 mm) with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC66 - Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC67 - Open Conduit System Supplying heavy gauge PVC conduit pipe …….dia .mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.25mm dia 2mm thick. with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC68 - Supplying PVC/GI flexible conduit pipe 25 mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completely with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC69 - Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts,nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.III - Double Door 4 Way TP & N with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC70 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50-63 A TPN with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC71 - Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6 Way with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC72 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC73 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC74 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A SP with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC75 - Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter. with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC76 - Supply and Installation/Fixing/Provision of Outdoor type thermoplastic modular panel enclosure with transparent Polycarbonate Lid,shock proof,IP65 weather proof ,rust proof, dust proof,water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase Three Phase Energy Meter in suitable base plate and having a provision for Fuse/MCB cut-out with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility. 300 mmx300mmx214 mm with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC77 - Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws,bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in ThermalMagnetic Release. Micro processor release shall have EarthFault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Polesshould have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority andNon-Priority loads must be available in the MCCB. MCCB shallbe provided with double insulation (insulation between frontcover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all thepoles simultaneously and they shall have a single mechanism. FOUR Pole 100 A 25 kA with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC78 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.

APMC79 - Laying of LT Cable cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 to 25 Sqmm with all leads and lifts complete as per specification and as directed by the Engineer in charge of the work.