Agricultural Produce Market Committee Tender

BYD04 - Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) The Rates Inclusive of cost of all materials,Labour,Including, all lead & lifts,loading and unloading charges, hire Charges of Machinery and equipments and the work should be carried out as per specifications and as per the directions of the Engineer Incharge of the work.

BYD05 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite-trap-basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machinery curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates The Rates Inclusive of cost of all materials Labour Including all lead and lifts loading and unloading charges, hire Charges of Machinery and equipments and the work should be carried out as per specifications and as per the directions of the Engineer Incharge of the work

BYD06 - Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. The Rates Inclusive of cost of all materials,Labour,Including, all lead and lifts,loading and unloading charges, hire Charges of Machinery and equipments and the work should be carried out as per specifications and as per the directions of the Engineer Incharge of the work.

BYD07 - Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. The Rates Inclusive of cost of all materials,Labour,Including, all lead and lifts,loading and unloading charges, hire Charges of Machinery and equipments and the work should be carried out as per specifications and as per the directions of the Engineer Incharge of the work.

BYD08 - Finishing walls with textured exterior paint of required shade :New work (Two coats applied at 3.28 L/10 m²) over and including priming coat of exterior primer applied at 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. The Rates Inclusive of cost of all materials,Labour,Including, all lead and lifts,loading & unloading charges, hire Charges of Machinery and equipments and the work should be carried out as per specifications & as per the directions of the Engineer Incharge of the work.

BYD09 - Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984/2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE Upto 110mm dia Coil shall be used. For HDPE PE 80 PN 6.0 HDPE Grade PE80-PN6.0, 75mm dia The Rates Inclusive of cost of all materials,Labour,Including, all lead and lifts,loading and unloading charges, hire Charges of Machinery and equipments and the work should be carried out as per specifications and as per the directions of the Engineer Incharge of the work.

BYD10 - Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. For :HDPE PE 80 PN 6.0 HDPE Grade PE80-PN6.0, 63mm dia The Rates Inclusive of cost of all materials,Labour,Including, all lead and lifts,loading and unloading charges, hire Charges of Machinery and equipments and the work should be carried out as per specifications and as per the directions of the Engineer Incharge of the work.

BYD11 - Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete 80 mm nominal bore The Rates Inclusive of cost of all materials,Labour,Including, all lead and lifts,loading and unloading charges, hire Charges of Machinery and equipments and the work should be carried out as per specifications and as per the directions of the Engineer Incharge of the work.

BYD12 - Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : Horizonta The Rates Inclusive of cost of all materials,Labour,Including, all lead & lifts,loading & unloading charges, hire Charges of Machinery & equipments & the work should be carried out as per specifications and as per the directions of the Engineer Incharge of the work.

BYD13 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 32 mm nominal dia Pipes The Rates Inclusive of cost of all materials,Labour,Including, all lead and lifts,loading and unloading charges, hire Charges of Machinery and equipments and the work should be carried out as per specifications & as per the directions of the Engineer Incharge of the work.

BYD14 - hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge. External work 25 mm nominal dia Pipes The Rates Inclusive of cost of all materials,Labour,Including, all lead & lifts,loading & unloading charges, hire Charges of Machinery & equipments & the work should be carried out as per specifications & as per the directions of the Engineer Incharge of the work.

BYD15 - Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :25 mm nominal bore The Rates Inclusive of cost of all materials,Labour,Including, all lead and lifts,loading and unloading charges, hire Charges of Machinery and equipments and the work should be carried out as per specifications and as per the directions of the Engineer Incharge of the work.

BYD16 - Providing, of DI flanged pipe conforming to IS 8329 : 2000 with latest amendments with Cement Mortar Lining (CML) with Portland Slag Cement as per IS 455:1989 and Metallic Zinc Coating as per annexure A of IS 8329 with finishing layer of Bituminous Coating as per Annexure C of IS 8329 and Flanges: Metallic zinc rich epoxy paint and Bituminous Coating, laying true to line and hoisting in position and aligning to correct plumb including cost of jointing material, conveying to work spot with fr pn.10.0 for 100mm The Rates Inclusive of cost of all materials,Labour,Including, all lead & lifts,loading & unloading charges, hire Charges of Machinery & equipments & the work should be carried out as per specifications & as per the directions of the Engineer Incharge of the work.

BYD17 - Providing and laying 100mm thick factory made precast M -40 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions more than 20MSA upto 50MSA & for Arterial streets of approved shape and colour, laid in required pattern and including over 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.(WMM/WBM Base , DLC to be paid separately as per relevant technical specification) The Rates Inclusive of cost of all materials,Labour,Including, all lead & lifts,loading & unloading charges, hire Charges of Machinery & equipments & the work should be carried out as per specifications & as per the directions of the Engineer Incharge of the work.

BYD18 - Providing and fixing brass ferrule with C.I mouth cover including boring and tapping the main : 20 mm nominal bore The Rates Inclusive of cost of all materials,Labour,Including, all lead and lifts,loading and unloading charges, hire Charges of Machinery and equipments and the work should be carried out as per specifications & as per the directions of the Engineer Incharge of the work.

BYD19 - Providing and fixing PTMT Sink cock of approved quality and colour 15 mm nominal bore, weighing not less than 130 g. The Rates Inclusive of cost of all materials,Labour,Including, all lead and lifts,loading and unloading charges, hire Charges of Machinery and equipments and the work should be carried out as per specifications and as per the directions of the Engineer Incharge of the work.

BYD20 - Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead and lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates The Rates Inclusive of cost of all materials,Labour,Including, all lead and lifts,loading and unloading charges, hire Charges of Machinery and equipments and the work should be carried out as per specifications and as per the directions of the Engineer Incharge of the work.

BYD21 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification The Rates Inclusive of cost of all materials,Labour,Including, all lead and lifts,loading and unloading charges, hire Charges of Machinery and equipments and the work should be carried out as per specifications and as per the directions of the Engineer Incharge of the work.

BYD22 - Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement and 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery and other incidental charges complete as per the direction of engineer incharge of work. BBM The Rates Inclusive of cost of all materials,Labour,Including, all lead and lifts,loading and unloading charges, hire Charges of Machinery and equipments and the work should be carried out as per specifications and as per the directions of the Engineer Incharge of the work

BYD23 - Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied At 1.67L/10 m² over and including priming coat of exterior primer applied At 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. The Rates Inclusive of cost of all materials,Labour,Including, all lead and lifts,loading and unloading charges, hire Charges of Machinery and equipments and the work should be carried out as per specifications and as per the directions of the Engineer Incharge of the work.

BYD24 - Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge. The Rates Inclusive of cost of all materials,Labour,Including, all lead & lifts,loading & unloading charges, hire Charges of Machinery & equipments & the work should be carried out as per specifications & as per the directions of the Engineer Incharge of the work.

BYD25 - Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work site, rolling and lowering into trenches, laying true to line and level including loading and unloading at both destinations and jointing of pipes and specials, perfect linking of joints with jack to correct position including cost of jointing materials, i.e, rubber rings conforming to IS: 5382 for S&S RCC pipes, with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc. complete (Contractor will make his own arrangements for procuring water for testing) Before the execution of the work, the contractor shall carry out the survey. RCC NP3 Class pipe of 300 mm dia. The Rates Inclusive of cost of all materials,Labour,Including, all lead & lifts,loading and unloading charges, hire Charges of Machinery and equipments and the work should be carried out as per specifications and as per the directions of the Engineer Incharge of the work.

BYD26 - Laying,Lowering and jointing of S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class ,rolling and lowering into trenches,laying true to line and level at both destinations and jointing of pipes and specials, perfect linking of joints with jack to correct position including cost of jointing materials, i.e, rubber rings with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc. complete. Contractor will make his own arrangements for procuring water for testing 300 mm dia. The Rates Inclusive of cost of all materials,Labour,Including, all lead and lifts,loading and unloading charges, hire Charges of Machinery and equipments and the work should be carried out as per specifications and as per the directions of the Engineer Incharge of the work.

BYD27 - Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the chamber and brick masonry in C.M 1:4 plaster with bricks of approved quality and CM plaster 1:3 proportion 12mm thick inside and outside except for the conical surface outside where the thickness of plaster shall be 20 mm thick, with 1 to 6 slope in the concrete towards the central drain, finished smooth and fixing of pipes in CC 1:2:4 with graded metal of 20 mm and down size including Providing and fixing SFRC Machinehole frame and cover confoming to IS 12592(Part-I) 1988 & IS 12592(Part-II) 1991 with latest amendments in CC 1:2:4 Providing and fixing of plastic foot steps staggered at 30cms apart as directed, watering, curing,barricading, danger lighting, pouring tar over M.H. frame and cover, cost of tar, shoring,strutting, dewatering, engraving Machinehole No. on the inner and outer conical surface etc. as per the drawing with all lead and lift for various diameters and depths noted below. With Laterite Bricks & Medium Duty cover and frame.For 1.2m dia Constructing Laterite Bricks Machinehole 1.2 m internal dia. 1.0 M depth and Medium duty SFRC cover and frame The Rates Inclusive of cost of all materials,Labour,Including, all lead and lifts,loading and unloading charges, hire Charges of Machinery and equipments and the work should be carried out as per specifications and as per the directions of the Engineer Incharge of the work.

BYD28 - Wet Mix Macadam (Plant Mix Method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. The Rates Inclusive of cost of all materials,Labour,Including, all lead and lifts,loading and unloading charges, hire Charges of Machinery and equipments and the work should be carried out as per specifications and as per the directions of the Engineer Incharge of the work.