Agricultural Produce Market Committee Tender

KSRB 4-1.3 : Providing and laying in position plain cement concrete of Mix 1:4:8 with OPC @ 180kgs, with 40mm and down size graded granite metal coarse aggregates @0.85cum and fine aggregates @ 0.57cum machine mixed, concrete laid in layers not exceeding 15 ems. thick, well compacted, in foundation, including cost of all materials, labour, HOM curing complete as per specifications. Specification No. KBS 4.1, 4.2. with all lead and lift etc.complete as directed by the Engineer-In-Charge of the work.

KSRB 4-1.5 : Providing and laying in position plain cement concrete of mix M20 with OPC cement @ 300kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.43cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, plinth and cills, including cost of all materials, labour, HOM of machinery, curing complete as per specifications. with all lead and lift etc.complete as directed by the Engineer-In-Charge of the work.

KSRB 4-1.6 ; Providing and laying in position plain cement concrete of Mix 1:2:4 with OPC @ 240kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.878 cum and fine aggregtes @ 0.53cum, machine mixed, concrete laid in layers not exceeding 15 ems. thick, well compacted, in foundation, plinth and cills, including cost of all materials, labour, HOM curing complete as per specifications. Specification No. KBS 4.1, 4.2.with all lead and lift etc.complete as directed by the Engineer-In-Charge of the work.

KSRB 4.2.2 Providing and laying in position reinforced cement concrete of Design Mix M20 with OPC@ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.460 cum, with super plasticisers @ 3 liters confirming to IS 9103-1999 reafirmed-2008, machine mixed, concrete laid in layers not exceeding 15 ems thick, vibrated for all works in foundation for footings, pedastals, retaining walls, return walls, walls (any thickness) including attached pilasters, columnspillars, posts, struts, buttresses, bed blocks, anchor blocks & plinths etc., including cost of all materials, labour, HOM curing, complete but excluding cost of reinforcement as per specifications.Specification No. KBS 4.1, 4.6. with all lead and lift etc.complete as directed by the Engineer-In-Charge of the work.

KSRB 4.2.8: Providing and laying in position reinforced cement concrete of design Mix M20 with OPC @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregates @ 0.46cum, with super plasticisers @31ts confirming to IS9103-1999 Reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15 ems thick, vibrated for all works in ground floor level for roof slabs, staircase, lintels, and beams retaining walls, return walls, walls (any thickness) including attached pilasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window cills, fillets etc., including cost of all materials, labour, HOM curing, complete but excluding cost of reinforcement as per specifications. Specification No. KBS 4.1, 4.6. with all lead and lift etc.complete as directed by the Engineer-In-Charge of the work.

KSRB 4-6.1 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour complete as per specificaitons. Specification No. KBS 4.6.2.with all lead and lift etc.complete as directed by the Engineer-In-Charge of the work.

KSRB 4-6.2 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for suspended floors, landings, balconies and likes, thickness upto 200 mm including cost of all materials, labour complete as per specificaitons for heights more than 3.50m from ground level. - 0 to 5 mtrs. Specification No. KBS 4.6.2.with all lead and lift etc.complete as directed by the Engineer-In-Charge of the work.

KSRB 4-6.4 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttresses, plinth cills and string courses cost of all materials, labour complete as per specifications. Specification No. KBS 4.6.2.with all lead and lift etc.complete as directed by the Engineer-In-Charge of the work.

KSRB 4-6.5 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for columns, pillars, post and struts, square / rectangular/ polygon in plan including cost of all materials, labour complete as per specifications. Specification No. KBS 4.6.2.with all lead and lift etc.complete as directed by the Engineer-In-Charge of the work.

KSRB 4-6.7 :Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lintels not exceeding 1m in depth including cost of all materials, labour complete as per specifications. Specification No. KBS 4.6.2.with all lead and lift etc.complete as directed by the Engineer-In-Charge of the work.

KSRB 4-6.11 :Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Stairs (excluding landing) except spiral staircase including cost of all materials, labour complete as per specificaiton. Specification No. KBS 4.6.2.with all lead and lift etc.complete as directed by the Engineer-In-Charge of the work.

KSRB 4.9.2 : Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM of machinery complete as per specifications. Specification No. KBS 4.6.3 - TMT bars Fe 500. with all lead and lift etc.complete as directed by the Engineer-In-Charge of the work.

KSRB 7.5 : Providing and fixing pull and push type rolling shutters of approved make out of 18 guage, 75mm wide cold rolled steel laths of convex corrugation, with side guides and bottom rail, with interlocking arrangements for steel laths by means of alternate clips, suspension shaft with High tension coil type springs two numbers, mounted on specially designed pipe shaft, with bracket plates, guide channels, ball bearing arrangements, for inside & outside locking with push & pull operations complete including pulling hooks, 4Nos. handles with all fittings and accessories, painted with a coat of red lead paint (without top cover) cost of materials, labour, HOM complete as per specifications.Shutter size 3.00mx2.8 m Specification No. KBS 7.10/7.12.with all lead and lift etc.complete as directed by the Engineer-In-Charge of the work.

KSRB 7.6 : Providing and fixing top covers made out of 20 guage M.S. sheet over pull and push rolling shutters bent to shape including cost of red lead primer coat of painting, materials, labour, HOM complete as per specifications. Specification No. KBS 7.10.6 I 7.12. with all lead and lift etc.complete as directed by the Engineer-In-Charge of the work.

KSRB 7.9 : Providing and fixing M.S.grill work for windows and ventilators using M.S. flats, or M.S. square rods, or combination of M.S. flats and square rods as per approved design, drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer, cost of materials, fixtures, labour and HOM complete as per specifications. Specification No. KBS 7.12.with all lead and lift etc.complete as directed by the Engineer-In-Charge of the work.

KSRB 7.12 : Providing and fixing in position aluminium windows and ventilators as per approved drawings with sliding shutters using four track window frame of size 122.2x31.75mm. for bottom section 1.1mm thick, weight 1.205 kg/m; sides and top sections 1.2 mm. thick weight 1.093 kg/m; shutter section comprising top and bottom section of size 40mmx18mm wall thickness 1.25mm. weight 0.417 kg./m, shutter side outer 40mmx18mm. wall thickness 1.25mm. weight 0417 kg/m, shutter interlock section 40mmx26.7mm wall thickness 1.1 mm. weight 0.469 kg/m; shutters mounted on nylon rollers with approved quality of fixtures such as aluminium handles, tower bolts etc.; providing and fixing 5.5mm. thick plain glass for shutters fitted with rubber beading including cutting to required length, joints mitred subdividing the frame, tenoned and riveted in the assembled frame to be stiffened with end clips at corners, angles etc.; fixed to the walls, lintels, floor beams;cills, as the case may be with necessary steel screws, raul plugs, or teak wood gatties including cutting masonry or concrete and making good the original surface using cement mortar; aluminium sections pretreated for removal of any rust and coated with greasy materials for non adhesion of mortar and other sticky materials; ( this coating should be cleaned after installation ) including cost of materials, fixtures, labour and HOM complete as per specifications..with all lead and lift etc.complete as directed by the Engineer-In-Charge of the work. using aluminium section anodized to 12- 15 microns.with all lead and lift etc.complete as directed by the Engineer-In-Charge of the work.

Providing and fixing M.S. Hand railing for Balcony/Straircase etc with 50mm dia. M.S. hollow pipe of 14 gauge, welded to 20mmx20mm M.S. square rod placed vertically, spaced at 100mm at regular intervals of 600mm. These vertical rods laterally tied to 3 horizontal rods spaced at equal interval. These assembly is fixed to concrete by using expansion bolts and welding the same to reinforcement bars and making good the surface. All the joints and sections hould be cut to length, welded and grinded wherever necessary etc., complete . The work includes cost of all materials, labour charges for all items of work, hire charges for welding, cutting and grinding equipment, and electricity charges, etc., complete as per specification and drawing.with all lead and lift etc.complete as directed by the Engineer-In-Charge of the work.

KSRB 10-3 :Providing and laying integral cement based waterproofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc , consisting of following application. (a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with proprietary water proofing compound conforming to 1S:2645 over the RCC slab after cleaning the surface before treatment. (b) Laying cement concrete using broken brick bats 25mm to 1OOmm size with 50% of cement mortar 1:5 admixed with proprietary water proofing compound conforming 1S:2645 over 20mm thick layer of cement mortar 1:5 admixed with proprietary water proofing compound to required slope and treating similarly the adjoining walls upto 300mm height including rounding off junctions of walls and slabs. (c) After two days of proper curing, applying a second coat of cement lurry admixed with proprietary water proofing compound (d) Finishing the surface with 20mm thick joint less cement mortar of mix 1:4 admixed with proprietary water proofing compound and finally finishing the surface with trowel and neat cement slurry and making of 300x300mm square. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test including cost of materials, labour complete as per specifications.with all lead and lift etc.complete as directed by the Engineer-In-Charge of the work.

Waterproofing of RCC Terrace I podium slab I toilet I utilities I water retaining structure by preparing the surface by chipping and cleaning and Grouting of Honey comb, voids,cracks I construction joints with cement slurry (1kg cement added in 10 ltr of water) added with 1OOgm of inorganic accelerator, followed by spraying of liquid biological modified alkaline earth silicates@ 040 ltr per sqm on whole surface to reduce the micro porosity and allowing it to dry, curing the surface for the silicates to penetrate deeper into the concrete and spraying waterproofing impregnate liquid containing silane and silanollinear copolymer@ 0.50 ltr per sqm and finally applying polymer slurry made out of cross linked acrylic /styrene / butadiene & cement in the ratio of 1:0.1, @ 0.50kglsqm on the whole surface, including all labour charges tools and equipments, all complete as per the specification. with all lead and lift etc.complete as directed by the Engineer-In-Charge of the work.

KSRB 14.10-2 Flooring with 20 mm thick polished shahabad slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, including cost of materials, labour, curing, polishing complete as per specifications. Specification No. KBS. with all lead and lift etc.complete as directed by the Engineer-In-Charge of the work.

KSRB15-3.8 : Providing 18mm thick cement plaster in single coat with cement mortar to brick masonry including rounding off corners wherever required smooth rendering, Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.cement mortar 1:4. with all lead and lift etc.complete as directed by the Engineer-In-Charge of the work.

KSRB15-3.9 : Providing 18mm thick cement plaster in single coat with cement mortar to brick masonry including rounding off corners wherever required smooth rendering, Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.cement mortar 1:6. with all lead and lift etc.complete as directed by the Engineer-In-Charge of the work.

KSRB15-3.13 : Providing 12mm thick cement plaster in single coat with cement mortar, to ceiling including rounding off corners wherever required smooth rendering, including providing and removing scaffolding, cost of materials, labour, curing etc., complete as per specification.cement mortar 1:3. with all lead and lift etc.complete as directed by the Engineer-In-Charge of the work.

KSRB 15-14.1 Providing and applying two coats with oil bound washable distemper of approved brand and shade on wall surface including priming coat with distemper primer after throughly brooming the surface free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications.with all lead and lift etc.complete as directed by the Engineer-In-Charge of the work.

KSRB 15-16.1 :Providing and finishing external walls in two coats with waterproof cement paint of approved brand and shade to give an even shade after throughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications.do- with primer.with all lead and lift etc.complete as directed by the Engineer-In-Charge of the work.

KSRB 15-18.2 :Providing and applying enamel metal paint two coats (excluding priming coat) over new steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter, including cost of materials, labour, complete as per specifications.with all lead and lift etc.complete as directed by the Engineer-In-Charge of the work.

KSRRB M300-14. Excavation for roadwork in all types of soil by mechanical means including cutting and loading to tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transportation and complete as per specifications. with all lead and lift etc.complete as directed by the Engineer-In-Charge of the work.

Vaccum de-watering with vaccum pump and suction mat and compaction with skin floater clubbed with floating disc including cost of generator, HOM of machinery, Screed Vibratory, Power Floater, blade and disc etc., with all lead and lift etc.complete as directed by the Engineer-In-Charge of the work.

Providing groove cutting for width of 5mm to 10mm and depth 80mm- 100mm including cost of cutting machine, generator & HOM of machinery, including cost of blade,coolant etc., including cleaning of groove & providing sand and hot bitumen fillars, and filler metal etc., including cost of conveyance of all materials, labour and all other incidental charges as per drawing and as per specifications. - for concrete pavement with all lead and lift etc.complete as directed by the Engineer-In-Charge of the work.

Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification. I.S. 3620/1979 having compressive strength not less then 3.5 N/mm2 for saturated dry samples.For super structure in CM 1:8.with all lead and lift etc.complete as directed by the Engineer-In-Charge of the work.

Supplying heavy gauge PVC conduit pipe 25mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 25mm dia 2mm thick.The rate inclusive of cost of all materials, labour including loading and unloading charges, including hire charges of machineries and equipment, the work should be carried out as per detailed specification and as per the directions of the Engineer-in-charge of the work. (Pg.no 02, Item no:-1.2.2) PWD Electrical SR 2019-20

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300mm .... 25mm etc. as required.The rate inclusive of cost of all materials, labour including loading and unloading charges, including hire charges of machineries and equipment, the work should be carried out as per detailed specification and as per the directions of the Engineer-in-charge of the work. (Pg.no 03, Item no:-1.8.2) PWD Electrical SR 2019-20

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete a)1-3Way.The rate inclusive of cost of all materials, labour including loading and unloading charges, including hire charges of machineries and equipment, the work should be carried out as per detailed specification and as per the directions of the Engineer-in-charge of the work. (Pg.no 09, Item no:-3.3.1) PWD Electrical SR 2019-20

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete a)4-5Way.The rate inclusive of cost of all materials, labour including loading and unloading charges, including hire charges of machineries and equipment, the work should be carried out as per detailed specification and as per the directions of the Engineer-in-charge of the work. (Pg.no 09, Item no:-3.3.2) PWD Electrical SR 2019-20

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch. The rate inclusive of cost of all materials, labour including loading and unloading charges, including hire charges of machineries and equipment, the work should be carried out as per detailed specification and as per the directions of the Engineer-in-charge of the work. (Pg.no 10, Item no:- 3.6.10) PWD Electrical SR 2019-20

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. a)2.5 sqmm (Pg.no 6, Item no:- 2.3.3) PWD Electrical SR 2019-20

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 32Amps.The rate inclusive of cost of all materials, labour including loading and unloading charges, including hire charges of machineries and equipment, the work should be carried out as per detailed specification and as per the directions of the Engineer-in-charge of the work. (Pg.no 25, Item no:- 5.7.2) PWD Electrical SR 2019-20

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure. II - Double Door. 6Way SP &N. The rate inclusive of cost of all materials, labour including loading and unloading charges, including hire charges of machineries and equipment, the work should be carried out as per detailed specification and as per the directions of the Engineer-in-charge of the work. (Pg.no 28, Item no:- 5.18.6) PWD Electrical SR 2019-20

Supplying & Fixing of 230 Volts 20/40 watts Fluorescent Lamp holder. The rate inclusive of cost of all materials, labour including loading and unloading charges, including hire charges of machineries and equipment, the work should be carried out as per detailed specification and as per the directions of the Engineer-in-charge of the work. (Pg.no 76, Item no:- 13.45) PWD Electrical SR 2019-20

Supplying and fixing of T5 Fluorescent Tube with 14W power consumption with low 3mg Mercury content & below 40% glass content than T8 lamp & 20% less phosphor coating than T8 with initial lumen on 1350 (for 3000-6500 deg Kelvin), rated Avg life (12 Hr. Cycle) of greater than 35000 burring hours. Operating voltage range from 180V to 265V, 50Hz AC power Supply, 28 watts Lamp. The rate inclusive of cost of all materials, labour including loading and unloading charges, including hire charges of machineries and equipment, the work should be carried out as per detailed specification and as per the directions of the Engineer-in-charge of the work. (Pg.no 72, Item no:- 13.18.2) PWD Electrical SR 2019-20

Supplying and Fixing 25mm dia class A GI pipe bracket up to 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light fitting of all capacities on rail/RCC/wall/tubular pole, using suitable clamps, bolts, nuts and wiring using suitable capacity wires.Using 25mm dia G.I.Pipe. The rate inclusive of cost of all materials, labour including loading and unloading charges, including hire charges of machineries and equipment, the work should be carried out as per detailed specification and as per the directions of the Engineer-in-charge of the work. (Pg.no 79, Item no:- 14.2.1) PWD Electrical SR 2019-20

Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.(As per Civil SR KSRB I-2, P-7), In soil (hard),The rate inclusive of cost of all materials, labour including loading and unloading charges, including hire charges of machineries and equipment, the work should be carried out as per detailed specification and as per the directions of the Engineer-in-charge of the work. (Pg.no 41, Item no:- 6.6.2) PWD Electrical SR 2019-20

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia.The rate inclusive of cost of all materials, labour including loading and unloading charges, including hire charges of machineries and equipment, the work should be carried out as per detailed specification and as per the directions of the Engineer-in-charge of the work. (Pg.no 40, Item no:- 6.1) PWD Electrical SR 2019-20

Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cutout with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility.300mmx450mmx214mm.The rate inclusive of cost of all materials, labour including loading and unloading charges, including hire charges of machineries and equipment, the work should be carried out as per detailed specification and as per the directions of the Engineer-in-charge of the work. (Pg.no 31, Item no:- 5.44.2) PWD Electrical SR 2019-20

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32Amps SP.The rate inclusive of cost of all materials, labour including loading and unloading charges, including hire charges of machineries and equipment, the work should be carried out as per detailed specification and as per the directions of the Engineer-in-charge of the work. (Pg.no 27, Item no:- 5.17.1) PWD Electrical SR 2019-20