Agricultural Produce Market Committee Tender

Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe/stoneware pipe/on wall/on pole as required 6 sqmm to 16 sqmm I no 6.5.1/p no 41

Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe/stoneware pipe/on wall/on pole as required 95 sqmm to 150 sqmm I no6.5.3/ p no 41

Digging of trench of 0.6 m deepx0.50 mtr wide refilling the trench to the required ground level and consolidating etc complete (As per Civil SR KSRB I-2,P-7 )In soil (hard) I no 6.6.2/p no 41

Digging of trench of 0.6 m deepx0.50 mtr wide refilling the trench to the required ground level and consolidating etc complete (As per Civil SR KSRB I-2,P-7 )In Asphalt cutting I no 6.6.4/p no 41

Supplying heavy gauge PVC conduit pipe 25 mm.dia confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or rawl plugs in case of brick walls and cement plastering damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. i no 1.1.3/p no 2

Supplying PVC/GI flexible conduit pipe…32 mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and the either end of the pipe terminated completely. i no 1.9.3/p no 3

Supplying of LED Floodlight with 120 W System power consumption pressure die cast aluminum housing with powder coating with IP 65 protection.1.200-275V voltage with electronic Driver, PF>0.9 should meet ANSI 2G Vibration test, Compliance to UL/CE with class I. system rating shall be 50 K hrs. @ Lumen maintenance of 70% system efficacy >80lm/w Over load & short circuit protection ensures reliable operation in spite of problem in output side. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHs. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minized minimal tools. lED Light fixture with....W system power consumption . LED Efficiency>130lm/w at 1W & Fixture Efficiency>80lm/w with nominal CRI>75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008, Housing with supplier word mark /name shall be Engraved/Embossing on the die cast housing/Body part. Warrantly of 5 years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer. i no 12.9.3/p no 67

Fixing halogen/metal hallide/SVL/IL /LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires complete. I no 14.5/p no 79

Providing and laying in position 100mm dia stone ware pipe in existing trench.i no 6.8/p no 41

SupplyingandfixingofclassA(mediumduty)GIpipeofwall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV. 50 mm I no 6.9.2/p no 42

supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 kv class (metal only) 25mm dia I no 6.11.2/p no 42

supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 kv class (metal only) 45mm dia I no 6.11.4/p no 42

supplying 16 sqmm tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes I no 6.17.6/p no 43

supplying 95 sqmm long barre sqmm tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes I no 6.147.11/p no 43

supplying, fixing , wiring, earth electrode for grounding conduits. I.C, cutouts and other equipment's on the meter board using 40mm dia 2.90 mm thick GI pipe 2.5 mtr long buired in a pit… The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc. is to be established through GI wire of size as per ISI specification 7.3.3 of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc. the pipe shall have 16 through holes of 122 mm dia i no 6.1/p no 40

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.25x3mm I no 6.3.1/p no 40

Supplyingandfixing2mmthickperforatedcableGItraywith on existing MS angle support using necessary GI bolts/nuts and washer or welding asrequired.300x50mm I no 6.16.2/p no 43

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat 50x50x6mm… with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. I no 5.41.2/p no 30

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 200x200x65mm I no 1.4.7/p no 2

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto1100Volts as perIS-694:1990 3c x 2.5Sqmm I NO 2.5.8/P no 6

Supplying and fixing of 11kV, 200 Amps Single Break GOS (Dwg No. BESCOM/GM/QS&S/23 Dtd 24.11.2018 BESCOM SR I no 23.01/p no 7

Supplying and fixing H - Frame Set for fixing 11kV, 200 Amps SB GOS - (For DP structure for providing New GOS for sectionalisation) I no 23.05/p no 7

Supplying and fixing of11kV Heat Shrinkable Straight Through Jointing Kits for XLPE Cable with Copper Lugs & Al Ferrules up to 240 sqmm I no 43.17/p no 14

Supplying and fixing of11kV Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable uo to 150 sq mm I no 43.08/p no 14