Uttar Pradesh Projects Corporation Limited Tender

... More
The UPPCL has issued a formal invitation for competitive bids for the Uttar Pradesh Projects Corporation Limited project, for Special Repair Work At Jnv Gumla (jharkhand) in Gumla, Jharkhand, with an estimated contract value of Rs. 3,50,56,000. The bid opening date for this tender is 08-05-2025 and the last date for bid submission is 29-05-2025. Interested bidders for Uttar Pradesh Projects Corporation Limited tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Uttar Pradesh Projects Corporation Limited - UPPCL Tender

Works
Civil And Construction
Eprocure
Opening Date8 May 2025
Closing Date29 May 2025
Tender Amount₹ 3,50,56,000 
Notes
Download

AI Insights

Bid Capacity
... View More
The formula for bid capacity is Bidding Capacity = {[AxNx2.5]-B}. Where, A = Maximum turnover in construction works executed in any one year during the last seven years N = Number of years prescribed for completion of work for which bids has been invited. B = Value of existing commitments and ongoing works to be completed during the period of completion of work for which bids have been invited.
Technical Capacity
... View More
The required prior work experience for the bidder includes experience in similar class of works completed during the last seven years. The bidder should furnish the list of all works of similar nature successfully completed during this period. For certain types of work, specific requirements are: - Aluminum Work: One similar work costing not less than 30% of the cost of this job in tender, or two similar works each costing not less than 50% of the cost of this job in tender, or three similar works each costing not less than 40% of the cost of this job in tender. - Steel Structure Work (MS truss work), Metallic Roofing work, and Water proofing work: One similar work costing not less than 80% of the cost of this job in tender, or two similar works each costing not less than 50% of the cost of this job in tender, or three similar works each costing not less than 40% of the cost of this job in tender. Additionally, the bidder should have satisfactorily completed works as mentioned below during the last seven years: - Three similar works each costing not less than 40% of the tendered cost, or two similar works each costing not less than 50% of the tendered cost, or one similar work costing not less than 80% of the tendered cost. - One work of any nature costing not less than 40% of the tendered cost with some Central/State Government Department or Reputed private entities. The bidder's performance for each work completed in the last seven years and in-hand should be certified by an officer not below the rank of Executive Engineer/Project Manager or equivalent. The bidder should also have an average annual financial turnover (gross) of minimum 30% of the tendered cost in Civil/Electrical construction work during the last available three-year consecutive balance sheets.

Costs

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
50mm average thickness

0.38

281

107.1562

... More
25 mm average thickness

2.04

139

284.4372

... More
Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.

-

-

-

... More
Bars upto 12 mm diameter

38.72

9

351.5776

... More
Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge.

16.95

420

7129.847999999999

... More
Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineerin- Charge

-

-

-

... More
Note: Rates shall include the providing necessary ground wires etc. The levelling gauges, if used, shall be paid for separately. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/ tapping with a blunt metal instrument.

-

-

-

... More
25mm thick in Grade M 25 with cement content not less than 330 kg per cum

2.04

821

1676.0436000000002

... More
50mm thick in Grade M 25 with cement content not less than 330 kg per cum

0.38

1266

481.1408

... More
Re-Baring of MS bar 10 mm dia with Fisher Chemical including drilling of hole, cleaning, and fixing of bar complete as per direction of Engineer-in-Charge.

10

550

5500

... More
Expansion Joint Treatment

-

-

-

... More
Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical localtion in load application areas that accommodates multi directional seismic movement without stress to it's components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self- centering arrangement that freely rotates / moves in all directions. The Self - centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in- Charge. (Material shall confirm to ASTM 6063).

-

-

-

... More
Floor Joint of 100 mm gap

4.8

7031

33752.688

... More
Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / centering arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063).

-

-

-

... More
Wall Joint of 100 mm gap

12.7

5836

74119.994

... More
Providing and fixing of expansion joint system of approved make and manufacture for various roof locations as per approved drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminum base members with, self aligning and self centering arragement support plates as per ASTM B221-02. The system shall be such that it provides water tight roof to roof /roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal aluminum base member designed to accommodate various project conditions and roof treatments. The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions. The Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063.)

-

-

-

... More
Roof Joint of 100 mm gap

22.06

6584

145248.9962

... More
Repairs to Roof

-

-

-

... More
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the samemembrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick

1634.95

591

966582.4400000001

... More
Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation.

1634.95

97

159881.7605

... More
Repair to Toilets

-

-

-

... More
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

-

-

-

... More
For thickness of tiles 10 mm to 25 mm

159.42

80

12871.570799999998

... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

43.16

1206

52060.0236

... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

116.26

1394

162153.635

... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.)

57.18

678

38811.4968

... More
Providing and filling of cinder in sunken portion.

1.62

2240

3628.8

... More
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :

-

-

-

... More
75 to 80 mm dia pipe

45

83

3747.1499999999996

... More
Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :

-

-

-

... More
15 mm to 40 mm nominal bore

45

164

7415.1

... More
Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge:

-

-

-

... More
Up to 150 mm diameter

35

365

12797.4

... More
Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge.

4

767

3068.56

... More
Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap.

5

1054

5273.150000000001

... More
Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

10

123

1232.6000000000001

... More
Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

6

147

885.06

... More
Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including stacking of useful materials near the site and disposal of unserviceable materials within 50 m lead as per direction of Engineer- charge :

-

-

-

... More
Rectangular manhole 90x80 cm and 45 cm deep

4

2794

11179.76

... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

-

-

-

... More
110 mm diameter

120

415

49816.799999999996

... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

-

-

-

... More
a) Coupler

-

-

-

... More
110 mm

25

149

3744.2500000000005

... More
b) Bend 87.5°

-

-

-

... More
110 mm bend

25

165

4134.75

... More
Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work :

-

-

-

... More
75 mm diameter pipes

5

31

155.1

... More
100 mm diameter pipes

5

39

199.4

... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

-

-

-

... More
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

5

7444

37220.700000000004

... More
Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standard pattern including cutting & making good the walls wherever required.

-

-

-

... More
a) Flat back wash Basin size 550x400 mm with single 15mm C.P. brass pillar tap.

8

2067

16536.96

... More
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.

-

-

-

... More
10 litre capacity - White

10

1309

13097.2

... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.

18

1813

32649.3

... More
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.

-

-

-

... More
a) 32mm dia (for wash basin)

8

131

1052.08

... More
b) 40mm dia (for sink and urinal)

4

131

526.04

... More
Providing and fixing CP Brass soap dish 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket and all fittings of the same material of approved quality and colour.

4

617

2468

... More
Providing & fixing C.P. Brass Waste Coupling for PVC waste Pipe.

12

1730

20760

... More
Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382.The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-charge at site.

-

-

-

... More
110 mm dia (Wall Thickness - 3.2 to 3.8 mm)

30

750

22500

... More
75 mm dia (Wall Thickness - 3.2 to 3.8 mm)

10

550

5500

... More
Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating complete in all respects.

-

-

-

... More
Multi Floor Trap (5" Ht) with height raiser and branch saddle strip of 50/75 mm outlet

5

673

3365

... More
Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser

5

831

4155

... More
P-Trap type Floor Trap 110 x 75 mm

8

565

4520

... More
Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps.

18

597

10746

... More
Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round cover with screws and other required fitting complete as required.

7

389

2723

... More
Providing and fixing 100 mm sand cast Iron grating for gully trap.

2

58

117.16

... More
Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers.

4

1768

7075

... More
Providing & fixing soil, waste and vent pipes.

-

-

-

... More
a) 100mm dia centrifugally cast iron S & S pipe.

5

1298

6494.15

... More
b) 75mm dia centrifugally cast iron S & S pipe.

5

1304

6523

... More
Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size). Including cost of cutting holes & making good the walls etc.

-

-

-

... More
a) for 100mm dia pipe.

10

399

3991.3999999999996

... More
b) for 75mm dia pipe.

10

396

3960

... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.

-

-

-

... More
a) 100mm

-

-

-

... More
Sand cast iron S&S as per IS - 3989

4

658

2633.4

... More
b) 75mm

-

-

-

... More
Sand cast iron S&S as per IS- 3989

4

575

2300.32

... More
Providing and fixing plain cast iron S & S sanitary bend.

-

-

-

... More
a) 100mm

-

-

-

... More
Sand cast iron S&S as per IS - 1729

4

517

2070

... More
b) 75mm

-

-

-

... More
Sand cast iron S&S as per IS - 3989

4

429

1718.2

... More
Providing and fixing centrifugaly cast iron single equal plain junction of required degree.

-

-

-

... More
a) 100x100x100mm

2

799

1598.42

... More
b) 75x75x75mm

2

692

1384.9

... More
Providing and fixing cast iron terminal guard.

-

-

-

... More
a) 100mm

2

556

1113.2

... More
b) 75mm

2

445

890.46

... More
Providing & fixing cast iron coller.

-

-

-

... More
a) 100 mm

-

-

-

... More
Sand cast iron S&S as per IS - 3989

2

564

1128.94

... More
b) 75mm dia.

-

-

-

... More
Sand cast iron S&S as per IS - 3989

2

398

796.52

... More
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters.

-

-

-

... More
a) 100mm

2

684

1369.5

... More
b) 75mm

2

578

1157.76

... More
Providing & fixing cast iron trap of self cleansing design with or without ventarm complete, including cost of cutting & making good the walls & floors.

-

-

-

... More
a) 100mm inlet & 75mm outlet.

2

2172

4345.34

... More
Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes, weighing not less than 60 gms.

10

117

1179.2

... More
Providing and fixing PTMT urinal cock of approved quality and colour.

-

-

-

... More
15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms

10

192

1929.4

... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

-

-

-

... More
15 mm nominal outer dia Pipes

25

547

13689.500000000002

... More
20 mm nominal outer dia Pipes

15

591

8870.4

... More
25 mm nominal outer dia Pipes

10

689

6899.8

... More
32 mm nominal outer dia Pipes

5

813

4066.15

... More
Providing and fixing brass stop cock of approved quality.

-

-

-

... More
15 mm nominal bore

10

388

3885.7999999999997

... More
Providing and fixing gun metal gate valve with wheel of approved quality.

-

-

-

... More
a) 25mm dia nominal bore

8

684

5477.12

... More
b) 32mm dia nominal bore

6

758

4551.36

... More
Providing and fixing ball valve (brass) of approved quality complete. (High or low pressure with plastic floats).

-

-

-

... More
a) 25mm. Nominal bore

2

510

1020.92

... More
Providing and fixing 30 cm long unplasticised PVC connection pipe with brass unions.

-

-

-

... More
a) 15mm nominal bore

2

93

187

... More
Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions.

-

-

-

... More
a) 15mm nominal bore

2

107

215.06

... More
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation 3concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :

-

-

-

... More
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

4

2191

8767.44

... More
Providing & fixing CP brass bib cock of approved quality conforming to IS 8931

-

-

-

... More
a) 15mm nominal bore

10

557

5574.8

... More
Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.

-

-

-

... More
a) 15mm nominal bore

5

878

4394.25

... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

-

-

-

... More
15mm nominal bore

5

631

3158.65

... More
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

5

82

411.4

... More
Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.

-

-

-

... More
25mm nominal bore, weighing not less than 62 gms

2

124

249.38

... More
Cutting holes up to 30x30 cm in walls including making good the same:

-

-

-

... More
With common burnt clay F.P.S. (non modular) bricks

5

458

2292.4

... More
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

2

497

994.4

... More
Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.

10

223

2231.9

... More
Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately) :

-

-

-

... More
Rectangular manhole 90x80 cm with rectangular cover 600 x 450 mm of grade LD - 2.5

2

2888

5776.1

... More
Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)

2000

-

1100

... More
Repair to Plaster and Plinth Protection

-

-

-

... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

8.83

1653

14604.4668

... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

220.98

824

182138.3454

... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

27.411

60

1647.94932

... More
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

125.09

27

3461.2403000000004

... More
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge.

-

-

-

... More
With cement mortar 1:4 (1cement: 4 coarse sand)

80.465

616

49610.69575

... More
15mm cement plaster of mix :

-

-

-

... More
1:6 (1 cement : 6 course sand)

11.34

434

4931.652599999999

... More
6mm cement plaster to ceiling of mix :

-

-

-

... More
1:3 ( 1 cement : 3 fine sand)

16.07

330

5311.135

... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

27.41

171

4705.2006

... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour

-

-

-

... More
New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre

27.41

204

5597.6702

... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour

-

-

-

... More
Old work (one or more coats)

125.09

68

8627.4573

... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:

-

-

-

... More
New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

80.465

188

15144.31765

... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade

-

-

-

... More
Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm)over existing cement paint surface

241.395

144

34864.67985

... More
Repairs to Door / Windows

-

-

-

... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

-

-

-

... More
Of area 3 sq. metres and below

30

403

12117.6

... More
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :

-

-

-

... More
Of area 3 sq. metres and below

16

157

2525.6

... More
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

11.73

1199

14072.715600000001

... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

-

-

-

... More
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

4.2

2631

11054.064

... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

4.2

508

2136.078

... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete

-

-

-

... More
Fixed to steel windows by welding

65.76

241

15848.8176

... More
Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete

-

-

-

... More
300 mm weighing not less than 200gms.

20

74

1482.8

... More
250 mm weighing not less than 150gms.

30

67

2014.8

... More
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :

-

-

-

... More
100X58X1.90 mm

30

117

3534.3

... More
Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm .

10

560

5600

... More
Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete.

-

-

-

... More
300 x 10mm

10

448

4480

... More
200 x 10mm

30

392

11760

... More
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. (a) 125 mm.

-

-

-

... More
125 mm

20

131

2622.4

... More
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

104.7

155

16319.589000000002

... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

12.6

2389

30105.305999999997

... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.5 mm thick.

15.75

1150

18121.1625

... More
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).

-

-

-

... More
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size

226.44

144

32643.590399999997

... More
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer

-

-

-

... More
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size

45.3

155

7060.911

... More
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.

-

-

-

... More
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

295.12

214

63368.1664

... More
Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with

-

-

-

... More
4.0 mm thick glass panes

20.91

1171

24488.119199999997

... More
Applying priming coat :

-

-

-

... More
With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood.

40.32

82

3311.0784000000003

... More
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works

18.87

74

1399.0218

... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

-

-

-

... More
Two or more coats on new work

70.69

248

17593.3272

... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

-

-

-

... More
One or more coats on old work

26.25

113

2968.35

... More
Repairs to Flooring

-

-

-

... More
Miscellaneous

-

-

-

... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

-

-

-

... More
In cement mortar

1.38

2266

3127.3835999999997

... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :

-

-

-

... More
1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

0.16

11938

1910.1200000000001

... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :

-

-

-

... More
Edges of slabs and breaks in floors and walls

-

-

-

... More
Under 20 cm wide

2.7

229

619.407

... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :

-

-

-

... More
Suspended floors, roofs, landings, balconies and access platform.

1.62

1019

1652.3676

... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

-

-

-

... More
Thermo-Mechanically Treated bars of grade Fe-500D or more.

35.77

118

4243.7528

... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

-

-

-

... More
Cement mortar 1:6 (1 cement : 6 coarse sand)

3.46

10016

34657.263

... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 75 in superstructure above plinth level up to floor V level.

-

-

-

... More
Cement mortar 1:4 (1 cement :4 coarse sand

12.6

1236

15575.868

... More
Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry.

12.6

115

1452.528

... More
ELECTRICAL WORK OF SCHOOL BUILDING

-

-

-

... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.

-

-

-

... More
Group C

10

1523

15237.5

... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

10

1536

15364.1

... More
Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

20

352

7044

... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

-

-

-

... More
2X1.5 sq. mm + 1 X 1.5 sq. mm earth wire

45

245

11056.5

... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire

30

352

10566

... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire

13

462

6018.09

... More
Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable and 1.5 sq.mm. FR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required.

-

-

-

... More
Group C

30

942

28281.600000000002

... More
Rewiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.

10

942

9427.2

... More
Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

-

-

-

... More
2 x 1.5 sq. mm

15

73

1107.3

... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

-

-

-

15

152

2293.5

15

194

2910.45

... More
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.

-

-

-

... More
100 mm X 100 mm X 60 mm deep

2

220

440.78

... More
150 mm X 75 mm X 60 mm deep

2

327

655.9

... More
Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings).

2

377

755.02

... More
Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required.

2

514

1029.2

... More
Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

1

91

91.74

... More
Supplying and fixing brass batten/ angle holder including connection etc. as required.

1

138

138.14

... More
Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.

-

-

-

... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

-

-

-

... More
4 way (4 + 12), Double door

2

4313

8627.92

... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

-

-

-

... More
Single pole

4

269

1079.8

... More
Single pole and neutral

2

631

1263.3

... More
Triple pole

1

1061

1061.88

... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

20

13

274.20000000000005

... More
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

1

283

283.66

... More
Earthing with G.I. earth pipe 4.5 Mtr long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

1

7228

7228.6

... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Mtr long etc. with charcoal/ coke and salt as required.

1

7879

7879.22

... More
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

2

744

1488.96

... More
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

2

302

605.28

... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

10

257

2573

... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

10

73

738.1999999999999

... More
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

16

217

3475.68

... More
Supply of 15W SURFACE MOUNTED ROUND LED with all accessories as per standard item..

2

1345

2690

... More
Supply of 20W SURFACE MOUNTED ROUND LED with all accessories as per standard item..(Such as Panasonic ADL04R206 or Equivalent).

2

953

1906

... More
Supply of 15W WALL BRACKET LED BULB with all accessories as per standard item..(Such as Panasonic PBUM01157 or Equivalent).

10

378

3780

... More
Supply of 20W SURFACE MOUNTED LED TUBE with all accessories as per standard item..(Such as Panasonic PBTM01207 or Equivalent).

2

897

1794

... More
MP HALL

-

-

-

... More
Repairs to Roof:

-

-

-

... More
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the samemembrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick

120.28

591

71109.53600000001

... More
Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation.

120.28

97

11762.1812

... More
Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

9.02

8846

79795.7006

... More
Repair to Plaster and Plinth Protection

-

-

-

... More
12 mm cement plaster of mix :

-

-

-

... More
1:6 (1 cement : 6 course sand)

17.5

366

6417.075

... More
White washing with lime to give an even shade:

-

-

-

... More
New work (three or more coats)

17.5

42

751.8000000000001

... More
Repairs to Door / Windows

-

-

-

... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

-

-

-

... More
Of area 3 sq. metres and below

10

403

4039.2000000000003

... More
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :

-

-

-

... More
Of area 3 sq. metres and below

20

157

3157

... More
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

11.88

1199

14252.673600000002

... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete

-

-

-

... More
Fixed to steel windows by welding

51.84

241

12493.9584

... More
Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete

-

-

-

... More
300 mm weighing not less than 200gms.

20

74

1482.8

... More
250 mm weighing not less than 150gms.

30

67

2014.8

... More
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).

-

-

-

... More
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size

247.86

144

35731.4976

... More
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.

-

-

-

... More
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

378.4

214

81250.048

... More
Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with

-

-

-

... More
4.0 mm thick glass panes

13.77

1171

16126.322399999997

... More
Applying priming coat :

-

-

-

... More
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works

13.77

74

1020.9078

... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

-

-

-

... More
Two or more coats on new work

13.77

171

2361.4173

... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

-

-

-

... More
One or more coats on old work

26.25

113

2968.35

... More
Miscellaneous

-

-

-

... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

-

-

-

... More
In cement mortar

1.82

2266

4124.520399999999

... More
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.

175

372

65114

... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

-

-

-

... More
Cement mortar 1:6 (1 cement : 6 coarse sand)

1.82

10016

18230.121

... More
Boys Dormitories (CBRI Type) - 6 Blocks, Total Beds= 6x40 =240

-

-

-

... More
Structural Repair & Retrofitting

-

-

-

... More
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge

-

-

-

... More
50mm average thickness

24.48

281

6903.1152

... More
25 mm average thickness

23.4

139

3262.662

... More
Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.

-

-

-

... More
Bars upto 12 mm diameter

766.08

9

6956.0064

... More
Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge.

13.5

420

5678.639999999999

... More
Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineerin- Charge

-

-

-

... More
Note: Rates shall include the providing necessary ground wires etc. The levelling gauges, if used, shall be paid for separately. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/ tapping with a blunt metal instrument.

-

-

-

... More
25mm thick in Grade M 25 with cement content not less than 330 kg per cum

23.4

821

19225.206

... More
50mm thick in Grade M 25 with cement content not less than 330 kg per cum

24.48

1266

30995.596800000003

... More
Re-Baring of MS bar 10 mm dia with Fisher Chaemical including drilling of hole, cleaning, and fixing of bar complete as per direction of Engineer-in-Charge.

12

550

6600

... More
Repairs to Roof

-

-

-

... More
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the samemembrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick

1826.7

591

1079945.04

... More
Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation.

1826.7

97

178632.99300000002

... More
Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

85.14

8846

753193.5642

... More
Repair to Toilets

-

-

-

... More
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

-

-

-

... More
For thickness of tiles 10 mm to 25 mm

1097.34

80

88719.93899999998

... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

189.54

1206

228625.0434

... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

890.52

1394

1242052.77

... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

189.54

678

128652.17039999999

... More
Providing and filling of cinder in sunken portions.

14.34

2240

32121.6

... More
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :

-

-

-

... More
75 to 80 mm dia pipe

390

83

32475.3

... More
Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :

-

-

-

... More
15 mm to 40 mm nominal bore

330

164

54377.4

... More
Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge:

-

-

-

... More
Up to 150 mm diameter

210

365

76784.4

... More
Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge.

24

767

18411.36

... More
Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap.

12

1054

12655.560000000001

... More
Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

36

147

5310.36

... More
Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres

-

-

-

... More
Up to 150 mm diameter

6

351

2108.7

... More
Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including stacking of useful materials near the site and disposal of unserviceable materials within 50 m lead as per direction of Engineer- charge :

-

-

-

... More
Rectangular manhole 90x80 cm and 45 cm deep

24

2794

67078.56

... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

-

-

-

... More
110 mm diameter

390

415

161904.6

... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

-

-

-

... More
a) Coupler

-

-

-

... More
110 mm

72

149

10783.44

... More
b) Bend 87.5°

-

-

-

... More
110 mm bend

96

165

15877.439999999999

... More
Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work :

-

-

-

... More
75 mm diameter pipes

30

31

930.6

... More
100 mm diameter pipes

30

39

1196.4

... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

-

-

-

... More
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

36

7444

267989.04000000004

... More
Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standard pattern including cutting & making good the walls wherever required.

-

-

-

... More
a) Flat back wash Basin size 550x400 mm with single 15mm C.P. brass pillar tap.

12

2067

24805.44

... More
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.

-

-

-

... More
a) 32mm dia (for wash basin)

12

131

1578.12

... More
b) 40mm dia (for sink and urinal)

12

131

1578.12

... More
Providing and fixing CP Brass soap dish 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket and all fittings of the same material of approved quality and colour.

12

617

7404

... More
Providing & fixing C.P. Brass Waste Coupling for PVC waste Pipe.

24

1730

41520

... More
Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382.The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-charge at site.

-

-

-

... More
110 mm dia (Wall Thickness - 3.2 to 3.8 mm)

150

750

112500

... More
75 mm dia (Wall Thickness - 3.2 to 3.8 mm)

60

550

33000

... More
Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating complete in all respects.

-

-

-

... More
Multi Floor Trap (5" Ht) with height raiser and branch saddle strip of 50/75 mm outlet

24

673

16152

... More
Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser

18

831

14958

... More
P-Trap type Floor Trap 110 x 75 mm

36

565

20340

... More
Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps.

78

597

46566

... More
Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round cover with screws and other required fitting complete as required.

12

389

4668

... More
Providing and fixing 100 mm sand cast Iron grating for gully trap.

12

58

702.96

... More
Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers.

12

1768

21225

... More
Providing & fixing soil, waste and vent pipes.

-

-

-

... More
a) 100mm dia centrifugally cast iron S & S pipe.

30

1298

38964.899999999994

... More
b) 75mm dia centrifugally cast iron S & S pipe.

30

1304

39138

... More
Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size). Including cost of cutting holes & making good the walls etc.

-

-

-

... More
a) for 100mm dia pipe.

120

399

47896.799999999996

... More
b) for 75mm dia pipe.

30

396

11880

... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.

-

-

-

... More
a) 100mm

-

-

-

... More
Sand cast iron S&S as per IS - 3989

12

775

9308.64

... More
b) 75mm

-

-

-

... More
Sand cast iron S&S as per IS- 3989

12

575

6900.960000000001

... More
Providing and fixing plain cast iron S & S sanitary bend.

-

-

-

... More
a) 100mm

-

-

-

... More
Sand cast iron S&S as per IS - 1729

12

517

6210

... More
b) 75mm

-

-

-

... More
Sand cast iron S&S as per IS - 3989

12

429

5154.6

... More
Providing and fixing centrifugaly cast iron single equal plain junction of required degree.

-

-

-

... More
a) 100x100x100mm

12

799

9590.52

... More
b) 75x75x75mm

12

692

8309.400000000001

... More
Providing and fixing cast iron terminal guard.

-

-

-

... More
a) 100mm

12

556

6679.200000000001

... More
b) 75mm

12

445

5342.76

... More
Providing & fixing cast iron coller.

-

-

-

... More
a) 100 mm

-

-

-

... More
Sand cast iron S&S as per IS - 3989

12

564

6773.64

... More
b) 75mm dia.

-

-

-

... More
Sand cast iron S&S as per IS - 3989

12

398

4779.12

... More
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters.

-

-

-

... More
a) 100mm

30

684

20542.5

... More
b) 75mm

42

578

24312.96

... More
Providing & fixing cast iron trap of self cleansing design with or without ventarm complete, including cost of cutting & making good the walls & floors.

-

-

-

... More
a) 100mm inlet & 75mm outlet.

18

2172

39108.06

... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

-

-

-

... More
15 mm nominal outer dia Pipes

180

547

98564.40000000001

... More
20 mm nominal outer dia Pipes

90

591

53222.4

... More
25 mm nominal outer dia Pipes

60

689

41398.8

... More
32 mm nominal outer dia Pipes

30

813

24396.9

... More
Providing and fixing brass stop cock of approved quality.

-

-

-

... More
15 mm nominal bore

60

388

23314.8

... More
Providing and fixing gun metal gate valve with wheel of approved quality.

-

-

-

... More
a) 25mm dia nominal bore

12

684

8215.68

... More
b) 32mm dia nominal bore

12

758

9102.72

... More
Providing and fixing ball valve (brass) of approved quality complete. (High or low pressure with plastic floats).

-

-

-

... More
a) 25mm. Nominal bore

12

510

6125.5199999999995

... More
Providing and fixing 30 cm long unplasticised PVC connection pipe with brass unions.

-

-

-

... More
a) 15mm nominal bore

24

93

2244

... More
Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions.

-

-

-

... More
a) 15mm nominal bore

24

107

2580.7200000000003

... More
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation 3concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :

-

-

-

... More
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

24

2191

52604.64

... More
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :

-

-

-

... More
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

12

11948

143383.68

... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

6000

12

72600

... More
Providing & fixing CP brass bib cock of approved quality conforming to IS 8931

-

-

-

... More
a) 15mm nominal bore

120

557

66897.6

... More
Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.

-

-

-

... More
a) 15mm nominal bore

60

878

52731

... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

-

-

-

... More
15mm nominal bore

24

631

15161.52

... More
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

12

82

987.36

... More
Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.

-

-

-

... More
25mm nominal bore, weighing not less than 62 gms

12

124

1496.28

... More
Cutting holes up to 30x30 cm in walls including making good the same:

-

-

-

... More
With common burnt clay F.P.S. (non modular) bricks

12

458

5501.76

... More
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

12

497

5966.4

... More
Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.

180

223

40174.2

... More
Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately) :

-

-

-

... More
Rectangular manhole 90x80 cm with rectangular cover 600 x 450 mm of grade LD - 2.5

24

2888

69313.20000000001

... More
Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)

12000

-

6600.000000000001

... More
Repair to Plaster and Plinth Protection

-

-

-

... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

-

-

-

... More
Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

22.98

1653

38008.0008

... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

575.94

824

474707.0262000001

... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

328.77

60

19765.6524

... More
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

830.34

27

22975.507800000003

... More
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge.

-

-

-

... More
With cement mortar 1:4 (1cement: 4 coarse sand)

191.985

616

118368.35175

... More
12mm cement plaster of mix :

-

-

-

... More
1:6 (1 cement : 6 course sand)

256.92

434

111731.9388

... More
6mm cement plaster to ceiling of mix :

-

-

-

... More
1:3 ( 1 cement : 3 fine sand)

94.77

330

31321.484999999997

... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour

-

-

-

... More
New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre

351.72

204

71828.2584

... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour

-

-

-

... More
Old work (one or more coats)

830.34

68

57268.5498

... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

351.72

171

60376.25520000001

... More
Repairs to Door / Windows

-

-

-

... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

-

-

-

... More
Of area 3 sq. metres and below

78

403

31505.760000000002

... More
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :

-

-

-

... More
Of area 3 sq. metres and below

90

157

14206.5

... More
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:

-

-

-

... More
Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

194.4

1199

233225.568

... More
Renewal of old putty of glass panes (length)

373.5

61

23071.095

... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

-

-

-

... More
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

60.48

2631

159178.5216

... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

60.48

508

30759.523199999996

... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

94.5

2389

225789.79499999998

... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.5 mm thick.

118.14

1150

135925.97699999998

... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to steel windows by welding

129.6

241

31234.895999999997

... More
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.

-

-

-

... More
With 12 mm mild steel U beading

249.48

1350

336997.584

... More
Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete

-

-

-

... More
300 mm weighing not less than 200gms.

72

74

5338.08

... More
250 mm weighing not less than 150gms.

72

67

4835.5199999999995

... More
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :

-

-

-

... More
100X58X1.90 mm

180

117

21205.8

... More
Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm .

60

560

33600

... More
Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete.

-

-

-

... More
300 x 10mm

60

448

26880

... More
150 x 10mm

60

392

23520

... More
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. (a) 125 mm.

-

-

-

... More
125 mm

120

131

15734.400000000001

... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.

-

-

-

... More
Using flats 30x6mm for diagonal braces and central cross piece

19.44

6120

118975.32720000001

... More
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).

-

-

-

... More
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size

816.48

144

117703.7568

... More
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer

-

-

-

... More
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size

1279.8

155

199482.426

... More
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.

-

-

-

... More
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

578.58

214

124232.69760000001

... More
Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with

-

-

-

... More
4.0 mm thick glass panes

45.36

1171

53122.00319999999

... More
Applying priming coat :

-

-

-

... More
With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood.

299.4

82

24586.728

... More
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works

75.42

74

5591.6388

... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

-

-

-

... More
Two or more coats on new work

374.82

171

64277.8818

... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

-

-

-

... More
One or more coats on old work

236.52

113

26745.6816

... More
Miscellaneous

-

-

-

... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

-

-

-

... More
In cement mortar

8.28

2266

18764.301599999995

... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

-

-

-

... More
Cement mortar 1:6 (1 cement : 6 coarse sand)

6.18

10016

61902.278999999995

... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 75 in superstructure above plinth level up to floor V level.

-

-

-

... More
Cement mortar 1:4 (1 cement :4 coarse sand

19.08

1236

23586.3144

... More
Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry.

19.08

115

2199.5424

... More
ELECTRICAL WORK OF BOYS DORMITORY

-

-

-

... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.

-

-

-

... More
Group B

150

1523

228562.5

... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

60

1536

92184.6

... More
Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

150

352

52830

... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

-

-

-

... More
2X1.5 sq. mm + 1 X 1.5 sq. mm earth wire

228

245

56019.6

... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire

72

352

25358.399999999998

... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire

72

462

33330.96

... More
Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable and 1.5 sq.mm. FR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required.

-

-

-

... More
Group B

60

942

56563.200000000004

... More
Rewiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.

24

942

22625.28

... More
Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

-

-

-

... More
2 x 1.5 sq. mm

120

73

8858.4

... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

-

-

-

270

152

41283

180

194

34925.4

... More
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.

-

-

-

... More
100 mm X 100 mm X 60 mm deep

30

220

6611.7

... More
150 mm X 75 mm X 60 mm deep

24

327

7870.799999999999

... More
Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings).

12

377

4530.12

... More
Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required.

12

514

6175.200000000001

... More
Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

120

91

11008.8

... More
Supplying and fixing brass batten/ angle holder including connection etc. as required.

90

138

12432.599999999999

... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

-

-

-

... More
4 way (4 + 12), Double door

6

4313

25883.760000000002

... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

-

-

-

... More
Single pole

36

269

9718.199999999999

... More
Single pole and neutral

24

631

15159.599999999999

... More
Triple pole

12

1061

12742.560000000001

... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

60

13

822.6

... More
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

6

283

1701.96

... More
Earthing with G.I. earth pipe 4.5 Mtr long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

6

7228

43371.600000000006

... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Mtr long etc. with charcoal/ coke and salt as required.

6

7879

47275.32

... More
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

48

744

35735.04

... More
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

60

302

18158.399999999998

... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

60

257

15438

... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

60

73

4429.2

... More
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

96

217

20854.079999999998

... More
Supply of 15W SURFACE MOUNTED ROUND LED with all accessories as per standard item..

12

1345

16140

... More
Supply of 20W SURFACE MOUNTED ROUND LED with all accessories as per standard item..(Such as Panasonic ADL04R206 or Equivalent).

24

953

22872

... More
Supply of 15W WALL BRACKET LED BULB with all accessories as per standard item..(Such as Panasonic PBUM01157 or Equivalent).

30

378

11340

... More
Supply of 20W SURFACE MOUNTED LED TUBE with all accessories as per standard item..(Such as Panasonic PBTM01207 or Equivalent).

30

897

26910

... More
GIRLS - 40 (CBRI) - 2 BLOCKS

-

-

-

... More
Structural Repair & Retrofitting

-

-

-

... More
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge

-

-

-

... More
50mm average thickness

8.16

281

2301.0384

... More
25 mm average thickness

7.8

139

1087.554

... More
Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.

-

-

-

... More
Bars upto 12 mm diameter

255.36

9

2318.6688

... More
Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge.

4.5

420

1892.8799999999999

... More
Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineerin- Charge

-

-

-

... More
Note: Rates shall include the providing necessary ground wires etc. The levelling gauges, if used, shall be paid for separately. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/ tapping with a blunt metal instrument.

-

-

-

... More
25mm thick in Grade M 25 with cement content not less than 330 kg per cum

7.8

821

6408.402

... More
50mm thick in Grade M 25 with cement content not less than 330 kg per cum

8.16

1266

10331.865600000001

... More
Re-Baring of MS bar 10 mm dia with Fisher Chaemical including drilling of hole, cleaning, and fixing of bar complete as per direction of Engineer-in-Charge.

4

550

2200

... More
Repairs to Roof

-

-

-

... More
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the samemembrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick

608.9

591

359981.68

... More
Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation.

608.9

97

59544.331

... More
Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

28.38

8846

251064.5214

... More
Repair to Toilets

-

-

-

... More
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

-

-

-

... More
For thickness of tiles 10 mm to 25 mm

365.78

80

29533.077199999996

... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

63.18

1206

76208.3478

... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

302.6

1394

422051.35000000003

... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

63.18

678

42884.0568

... More
Providing and filling of cinder in sunken portions.

10.54

2240

23609.6

... More
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :

-

-

-

... More
75 to 80 mm dia pipe

130

83

10825.1

... More
Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :

-

-

-

... More
15 mm to 40 mm nominal bore

110

164

18125.8

... More
Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge:

-

-

-

... More
Up to 150 mm diameter

70

365

25594.8

... More
Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge.

8

767

6137.12

... More
Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap.

4

1054

4218.52

... More
Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

12

147

1770.12

... More
Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres

-

-

-

... More
Up to 150 mm diameter

2

351

702.9

... More
Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including stacking of useful materials near the site and disposal of unserviceable materials within 50 m lead as per direction of Engineer- charge :

-

-

-

... More
Rectangular manhole 90x80 cm and 45 cm deep

8

2794

22359.52

... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

-

-

-

... More
110 mm diameter

130

415

53968.2

... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

-

-

-

... More
a) Coupler

-

-

-

... More
110 mm

24

149

3594.4800000000005

... More
b) Bend 87.5°

-

-

-

... More
110 mm bend

32

165

5292.48

... More
Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work :

-

-

-

... More
75 mm diameter pipes

10

31

310.2

... More
100 mm diameter pipes

10

39

398.8

... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

-

-

-

... More
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

12

7444

89329.68000000001

... More
Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standard pattern including cutting & making good the walls wherever required.

-

-

-

... More
a) Flat back wash Basin size 550x400 mm with single 15mm C.P. brass pillar tap.

4

2067

8268.48

... More
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.

-

-

-

... More
a) 32mm dia (for wash basin)

4

131

526.04

... More
b) 40mm dia (for sink and urinal)

4

131

526.04

... More
Providing and fixing CP Brass soap dish 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket and all fittings of the same material of approved quality and colour.

4

617

2468

... More
Providing & fixing C.P. Brass Waste Coupling for PVC waste Pipe.

8

1730

13840

... More
Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382.The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-charge at site.

-

-

-

... More
110 mm dia (Wall Thickness - 3.2 to 3.8 mm)

50

750

37500

... More
75 mm dia (Wall Thickness - 3.2 to 3.8 mm)

20

550

11000

... More
Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating complete in all respects.

-

-

-

... More
Multi Floor Trap (5" Ht) with height raiser and branch saddle strip of 50/75 mm outlet

8

673

5384

... More
Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser

6

831

4986

... More
P-Trap type Floor Trap 110 x 75 mm

12

565

6780

... More
Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps.

26

597

15522

... More
Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round cover with screws and other required fitting complete as required.

4

389

1556

... More
Providing and fixing 100 mm sand cast Iron grating for gully trap.

4

58

234.32

... More
Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers.

4

1768

7075

... More
Providing & fixing soil, waste and vent pipes.

-

-

-

... More
a) 100mm dia centrifugally cast iron S & S pipe.

10

1298

12988.3

... More
b) 75mm dia centrifugally cast iron S & S pipe.

10

1304

13046

... More
Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size). Including cost of cutting holes & making good the walls etc.

-

-

-

... More
a) for 100mm dia pipe.

40

399

15965.599999999999

... More
b) for 75mm dia pipe.

10

396

3960

... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.

-

-

-

... More
a) 100mm

-

-

-

... More
Sand cast iron S&S as per IS - 3989

4

775

3102.88

... More
b) 75mm

-

-

-

... More
Sand cast iron S&S as per IS- 3989

4

575

2300.32

... More
Providing and fixing plain cast iron S & S sanitary bend.

-

-

-

... More
a) 100mm

-

-

-

... More
Sand cast iron S&S as per IS - 1729

4

517

2070

... More
b) 75mm

-

-

-

... More
Sand cast iron S&S as per IS - 3989

4

429

1718.2

... More
Providing and fixing centrifugaly cast iron single equal plain junction of required degree.

-

-

-

... More
a) 100x100x100mm

4

799

3196.84

... More
b) 75x75x75mm

4

692

2769.8

... More
Providing and fixing cast iron terminal guard.

-

-

-

... More
a) 100mm

4

556

2226.4

... More
b) 75mm

4

445

1780.92

... More
Providing & fixing cast iron coller.

-

-

-

... More
a) 100 mm

-

-

-

... More
Sand cast iron S&S as per IS - 3989

4

564

2257.88

... More
b) 75mm dia.

-

-

-

... More
Sand cast iron S&S as per IS - 3989

4

398

1593.04

... More
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters.

-

-

-

... More
a) 100mm

10

684

6847.5

... More
b) 75mm

14

578

8104.32

... More
Providing & fixing cast iron trap of self cleansing design with or without ventarm complete, including cost of cutting & making good the walls & floors.

-

-

-

... More
a) 100mm inlet & 75mm outlet.

6

2172

13036.02

... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

-

-

-

... More
15 mm nominal outer dia Pipes

60

547

32854.8

... More
20 mm nominal outer dia Pipes

30

591

17740.8

... More
25 mm nominal outer dia Pipes

20

689

13799.6

... More
32 mm nominal outer dia Pipes

10

813

8132.3

... More
Providing and fixing brass stop cock of approved quality.

-

-

-

... More
15 mm nominal bore

20

388

7771.599999999999

... More
Providing and fixing gun metal gate valve with wheel of approved quality.

-

-

-

... More
a) 25mm dia nominal bore

4

684

2738.56

... More
b) 32mm dia nominal bore

4

758

3034.24

... More
Providing and fixing ball valve (brass) of approved quality complete. (High or low pressure with plastic floats).

-

-

-

... More
a) 25mm. Nominal bore

4

510

2041.84

... More
Providing and fixing 30 cm long unplasticised PVC connection pipe with brass unions.

-

-

-

... More
a) 15mm nominal bore

8

93

748

... More
Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions.

-

-

-

... More
a) 15mm nominal bore

8

107

860.24

... More
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation 3concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :

-

-

-

... More
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

8

2191

17534.88

... More
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :

-

-

-

... More
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

4

11948

47794.56

... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

2000

12

24200

... More
Providing & fixing CP brass bib cock of approved quality conforming to IS 8931

-

-

-

... More
a) 15mm nominal bore

40

557

22299.2

... More
Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.

-

-

-

... More
a) 15mm nominal bore

20

878

17577

... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

-

-

-

... More
15mm nominal bore

8

631

5053.84

... More
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

4

82

329.12

... More
Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.

-

-

-

... More
25mm nominal bore, weighing not less than 62 gms

4

124

498.76

... More
Cutting holes up to 30x30 cm in walls including making good the same:

-

-

-

... More
With common burnt clay F.P.S. (non modular) bricks

4

458

1833.92

... More
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

4

497

1988.8

... More
Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.

60

223

13391.4

... More
Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately) :

-

-

-

... More
Rectangular manhole 90x80 cm with rectangular cover 600 x 450 mm of grade LD - 2.5

8

2888

23104.4

... More
Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)

4000

-

2200

... More
Repair to Plaster and Plinth Protection

-

-

-

... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

-

-

-

... More
Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

7.66

1653

12669.3336

... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

191.98

824

158235.6754

... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

109.59

60

6588.5508

... More
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

276.78

27

7658.5026

... More
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge.

-

-

-

... More
With cement mortar 1:4 (1cement: 4 coarse sand)

64

616

39459.2

... More
12mm cement plaster of mix :

-

-

-

... More
1:6 (1 cement : 6 course sand)

85.64

434

37243.9796

... More
6mm cement plaster to ceiling of mix :

-

-

-

... More
1:3 ( 1 cement : 3 fine sand)

31.59

330

10440.495

... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour

-

-

-

... More
New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre

117.24

204

23942.7528

... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour

-

-

-

... More
Old work (one or more coats)

276.78

68

19089.5166

... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

117.24

171

20125.4184

... More
Repairs to Door / Windows

-

-

-

... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

-

-

-

... More
Of area 3 sq. metres and below

26

403

10501.92

... More
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :

-

-

-

... More
Of area 3 sq. metres and below

30

157

4735.5

... More
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:

-

-

-

... More
Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

64.8

1199

77741.856

... More
Renewal of old putty of glass panes (length)

124.5

61

7690.365000000001

... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

-

-

-

... More
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

20.16

2631

53059.5072

... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

20.16

508

10253.1744

... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

31.5

2389

75263.265

... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.5 mm thick.

39.38

1150

45308.659

... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to steel windows by welding

43.2

241

10411.632

... More
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.

-

-

-

... More
With 12 mm mild steel U beading

83.16

1350

112332.52799999999

... More
Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete

-

-

-

... More
300 mm weighing not less than 200gms.

24

74

1779.3600000000001

... More
250 mm weighing not less than 150gms.

24

67

1611.84

... More
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :

-

-

-

... More
100X58X1.90 mm

60

117

7068.6

... More
Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm .

20

560

11200

... More
Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete.

-

-

-

... More
300 x 10mm

20

448

8960

... More
150 x 10mm

20

392

7840

... More
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. (a) 125 mm.

-

-

-

... More
125 mm

40

131

5244.8

... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.

-

-

-

... More
Using flats 30x6mm for diagonal braces and central cross piece

6.48

6120

39658.4424

... More
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).

-

-

-

... More
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size

272.16

144

39234.585600000006

... More
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer

-

-

-

... More
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size

426.6

155

66494.142

... More
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.

-

-

-

... More
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

192.86

214

41410.8992

... More
Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with

-

-

-

... More
4.0 mm thick glass panes

15.12

1171

17707.334399999996

... More
Applying priming coat :

-

-

-

... More
With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood.

99.8

82

8195.576000000001

... More
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works

25.14

74

1863.8796

... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

-

-

-

... More
Two or more coats on new work

124.94

171

21425.960600000002

... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

-

-

-

... More
One or more coats on old work

78.84

113

8915.2272

... More
Miscellaneous

-

-

-

... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

-

-

-

... More
In cement mortar

2.76

2266

6254.767199999999

... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

-

-

-

... More
Cement mortar 1:6 (1 cement : 6 coarse sand)

2.06

10016

20634.093

... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 75 in superstructure above plinth level up to floor V level.

-

-

-

... More
Cement mortar 1:4 (1 cement :4 coarse sand

6.36

1236

7862.104800000001

... More
Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry.

6.36

115

733.1808000000001

... More
ELECTRICAL WORK OF GIRLS - 40 (CBRI) - 2 BLOCKS

-

-

-

... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.

-

-

-

... More
Group B

32

1523

48760

... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

20

1536

30728.2

... More
Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

50

352

17610

... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

-

-

-

... More
2X1.5 sq. mm + 1 X 1.5 sq. mm earth wire

70

245

17199

... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire

30

352

10566

... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire

30

462

13887.9

... More
Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable and 1.5 sq.mm. FR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required.

-

-

-

... More
Group B

20

942

18854.4

... More
Rewiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.

8

942

7541.76

... More
Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

-

-

-

... More
2 x 1.5 sq. mm

40

73

2952.7999999999997

... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

-

-

-

90

152

13761

60

194

11641.8

... More
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.

-

-

-

... More
100 mm X 100 mm X 60 mm deep

10

220

2203.8999999999996

... More
150 mm X 75 mm X 60 mm deep

8

327

2623.6

... More
Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings).

4

377

1510.04

... More
Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required.

4

514

2058.4

... More
Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

40

91

3669.6

... More
Supplying and fixing brass batten/ angle holder including connection etc. as required.

30

138

4144.2

... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

-

-

-

... More
4 way (4 + 12), Double door

2

4313

8627.92

... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

-

-

-

... More
Single pole

12

269

3239.3999999999996

... More
Single pole and neutral

8

631

5053.2

... More
Triple pole

4

1061

4247.52

... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

20

13

274.20000000000005

... More
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

2

283

567.32

... More
Earthing with G.I. earth pipe 4.5 Mtr long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

2

7228

14457.2

... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Mtr long etc. with charcoal/ coke and salt as required.

2

7879

15758.44

... More
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

20

744

14889.6

... More
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

20

302

6052.799999999999

... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

20

257

5146

... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

20

73

1476.3999999999999

... More
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

32

217

6951.36

... More
Supply of 15W SURFACE MOUNTED ROUND LED with all accessories as per standard item..

4

1345

5380

... More
Supply of 20W SURFACE MOUNTED ROUND LED with all accessories as per standard item..(Such as Panasonic ADL04R206 or Equivalent).

8

953

7624

... More
Supply of 15W WALL BRACKET LED BULB with all accessories as per standard item..(Such as Panasonic PBUM01157 or Equivalent).

10

378

3780

... More
Supply of 20W SURFACE MOUNTED LED TUBE with all accessories as per standard item..(Such as Panasonic PBTM01207 or Equivalent).

10

897

8970

... More
Girls Dormitories (CPWD Type) 1 Block

-

-

-

... More
Structural Repair & Retrofitting

-

-

-

... More
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge

-

-

-

... More
50mm average thickness

14.58

281

4111.4142

... More
Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.

-

-

-

... More
Bars upto 12 mm diameter

233.28

9

2118.1824

... More
Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge.

14.58

420

6132.9312

... More
Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineerin- Charge

-

-

-

... More
Note: Rates shall include the providing necessary ground wires etc. The levelling gauges, if used, shall be paid for separately. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/ tapping with a blunt metal instrument.

-

-

-

... More
50mm thick in Grade M 25 with cement content not less than 330 kg per cum

14.58

1266

18460.612800000003

... More
Repairs to Roof

-

-

-

... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

-

-

-

... More
In cement mortar

36.47

2266

82649.0434

... More
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the samemembrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick

303.88

591

179653.856

... More
Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation.

303.88

97

29716.4252

... More
Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

22.79

8846

201612.4187

... More
Repair to Toilets

-

-

-

... More
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

-

-

-

... More
For thickness of tiles 10 mm to 25 mm

87.43

80

7059.0982

... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

87.43

1394

121942.99250000001

... More
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :

-

-

-

... More
75 to 80 mm dia pipe

15

83

1249.05

... More
Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :

-

-

-

... More
15 mm to 40 mm nominal bore

35

164

5767.3

... More
Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge:

-

-

-

... More
Up to 150 mm diameter

15

365

5484.599999999999

... More
Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge.

2

767

1534.28

... More
Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap.

2

1054

2109.26

... More
Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

2

147

295.02

... More
Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres

-

-

-

... More
Up to 150 mm diameter

1

351

351.45

... More
Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including stacking of useful materials near the site and disposal of unserviceable materials within 50 m lead as per direction of Engineer- charge :

-

-

-

... More
Rectangular manhole 90x80 cm and 45 cm deep

2

2794

5589.88

... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

-

-

-

... More
110 mm diameter

15

415

6227.099999999999

... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

-

-

-

... More
a) Coupler

-

-

-

... More
110 mm

5

149

748.85

... More
b) Bend 87.5°

-

-

-

... More
110 mm bend

5

165

826.9499999999999

... More
Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work :

-

-

-

... More
75 mm diameter pipes

5

31

155.1

... More
100 mm diameter pipes

10

39

398.8

... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

-

-

-

... More
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

2

7444

14888.28

... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.

-

-

-

... More
W.C. pan with ISI marked white solid plastic seat and lid

2

7167

14334.22

... More
Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standard pattern including cutting & making good the walls wherever required.

-

-

-

... More
a) Flat back wash Basin size 550x400 mm with single 15mm C.P. brass pillar tap.

2

2067

4134.24

... More
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.

-

-

-

... More
a) 32mm dia (for wash basin)

2

131

263.02

... More
b) 40mm dia (for sink and urinal)

-

-

-

... More
Providing & fixing C.P. Brass health faucet for ablution with 1 meter long PVC tube, hand shower, couplings, wall hook and other accessories.

2

1831

3662

... More
Providing and fixing CP Brass soap dish 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket and all fittings of the same material of approved quality and colour.

2

617

1234

... More
Providing & fixing C.P. Brass Waste Coupling for PVC waste Pipe.

6

1730

10380

... More
Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382.The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-charge at site.

-

-

-

... More
110 mm dia (Wall Thickness - 3.2 to 3.8 mm)

10

750

7500

... More
75 mm dia (Wall Thickness - 3.2 to 3.8 mm)

10

550

5500

... More
Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating complete in all respects.

-

-

-

... More
Multi Floor Trap (5" Ht) with height raiser and branch saddle strip of 50/75 mm outlet

2

673

1346

... More
Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser

2

831

1662

... More
P-Trap type Floor Trap 110 x 75 mm

2

565

1130

... More
Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps.

6

597

3582

... More
Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round cover with screws and other required fitting complete as required.

4

389

1556

... More
Providing and fixing 100 mm sand cast Iron grating for gully trap.

4

58

234.32

... More
Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers.

2

1768

3537.5

... More
Providing and fixing toilet paper holder :

-

-

-

... More
Vitreous china

2

600

1201.98

... More
Providing & fixing soil, waste and vent pipes.

-

-

-

... More
a) 100mm dia centrifugally cast iron S & S pipe.

5

1298

6494.15

... More
b) 75mm dia centrifugally cast iron S & S pipe.

5

1304

6523

... More
Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size). Including cost of cutting holes & making good the walls etc.

-

-

-

... More
a) for 100mm dia pipe.

2

399

798.28

... More
b) for 75mm dia pipe.

2

396

792

... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.

-

-

-

... More
a) 100mm

-

-

-

... More
Sand cast iron S&S as per IS - 3989

2

775

1551.44

... More
b) 75mm

-

-

-

... More
Sand cast iron S&S as per IS- 3989

2

575

1150.16

... More
Providing and fixing plain cast iron S & S sanitary bend.

-

-

-

... More
a) 100mm

-

-

-

... More
Sand cast iron S&S as per IS - 1729

2

517

1035

... More
b) 75mm

-

-

-

... More
Sand cast iron S&S as per IS - 3989

2

429

859.1

... More
Providing and fixing centrifugaly cast iron single equal plain junction of required degree.

-

-

-

... More
a) 100x100x100mm

2

799

1598.42

... More
b) 75x75x75mm

2

692

1384.9

... More
Providing and fixing cast iron terminal guard.

-

-

-

... More
a) 100mm

2

556

1113.2

... More
b) 75mm

2

445

890.46

... More
Providing & fixing cast iron coller.

-

-

-

... More
a) 100 mm

-

-

-

... More
Sand cast iron S&S as per IS - 3989

2

564

1128.94

... More
b) 75mm dia.

-

-

-

... More
Sand cast iron S&S as per IS - 3989

2

398

796.52

... More
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters.

-

-

-

... More
a) 100mm

3

684

2054.25

... More
b) 75mm

4

578

2315.52

... More
Providing & fixing cast iron trap of self cleansing design with or without ventarm complete, including cost of cutting & making good the walls & floors.

-

-

-

... More
a) 100mm inlet & 75mm outlet.

2

2172

4345.34

... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

-

-

-

... More
15 mm nominal outer dia Pipes

15

547

8213.7

... More
20 mm nominal outer dia Pipes

10

591

5913.6

... More
25 mm nominal outer dia Pipes

5

689

3449.9

... More
32 mm nominal outer dia Pipes

5

813

4066.15

... More
Providing and fixing brass stop cock of approved quality.

-

-

-

... More
15 mm nominal bore

5

388

1942.8999999999999

... More
Providing and fixing gun metal gate valve with wheel of approved quality.

-

-

-

... More
a) 25mm dia nominal bore

4

684

2738.56

... More
b) 32mm dia nominal bore

4

758

3034.24

... More
Providing and fixing ball valve (brass) of approved quality complete. (High or low pressure with plastic floats).

-

-

-

... More
a) 25mm. Nominal bore

4

510

2041.84

... More
Providing and fixing 30 cm long unplasticised PVC connection pipe with brass unions.

-

-

-

... More
a) 15mm nominal bore

4

93

374

... More
Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions.

-

-

-

... More
a) 15mm nominal bore

4

107

430.12

... More
Providing & fixing CP brass bib cock of approved quality conforming to IS 8931

-

-

-

... More
a) 15mm nominal bore

10

557

5574.8

... More
Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.

-

-

-

... More
a) 15mm nominal bore

1

878

878.85

... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

-

-

-

... More
15mm nominal bore

2

631

1263.46

... More
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

2

82

164.56

... More
Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.

-

-

-

... More
25mm nominal bore, weighing not less than 62 gms

2

124

249.38

... More
Cutting holes up to 30x30 cm in walls including making good the same:

-

-

-

... More
With common burnt clay F.P.S. (non modular) bricks

4

458

1833.92

... More
Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)

4000

-

2200

... More
Repair to Plaster and Plinth Protection

-

-

-

... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.

-

-

-

... More
Two or more coats on new work

3.65

1653

6036.954

... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

90.77

824

74815.3571

... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

48.785

60

2932.9541999999997

... More
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

189.56

27

5245.1252

... More
15mm cement plaster on rough side of single or half brick wall of mix

-

-

-

... More
1:6 (1 cement : 6 course sand)

49.225

434

21407.46025

... More
6mm cement plaster to ceiling of mix :

-

-

-

... More
1:3 ( 1 cement : 3 fine sand)

7.2

330

2379.6

... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour

-

-

-

... More
New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre

56.43

204

11524.1346

... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour 13.81.1 Old work (one or more coats)

-

-

-

... More
Old work (one or more coats)

189.56

68

13073.9532

... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

56.43

171

9686.773799999999

... More
Repairs to Door / Windows

-

-

-

... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

-

-

-

... More
Of area 3 sq. metres and below

9

403

3635.28

... More
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :

-

-

-

... More
Of area 3 sq. metres and below

5

157

789.25

... More
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:

-

-

-

... More
Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

31.5

1199

37791.18

... More
Renewal of old putty of glass panes (length)

213

61

13157.01

... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete .Fixed to steel windows by welding

8.64

241

2082.3264

... More
Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete

-

-

-

... More
250 mm weighing not less than 150gms.

8

67

537.28

... More
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :

-

-

-

... More
100X58X1.90 mm

24

117

2827.44

... More
Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm .

8

560

4480

... More
Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete.

-

-

-

... More
300 x 10mm

8

448

3584

... More
150 x 10mm

8

392

3136

... More
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. (a) 125 mm.

-

-

-

... More
125 mm

16

131

2097.92

... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

-

-

-

... More
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

5.04

2631

13264.8768

... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

5.04

508

2563.2936

... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

9.45

2389

22578.979499999998

... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.5 mm thick.

11.25

1150

12943.6875

... More
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.

-

-

-

... More
With 12 mm mild steel U beading

41.58

1350

56166.263999999996

... More
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).

-

-

-

... More
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size

77.76

144

11209.8816

... More
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer

-

-

-

... More
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size

116.1

155

18096.507

... More
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.

-

-

-

... More
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

10.52

214

2258.8543999999997

... More
Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with

-

-

-

... More
4.0 mm thick glass panes

2.88

1171

3372.8255999999997

... More
Applying priming coat :

-

-

-

... More
With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood.

34.78

82

2856.1336

... More
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works

8.43

74

625.0002

... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

-

-

-

... More
Two or more coats on new work

43.21

248

10754.1048

... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

-

-

-

... More
One or more coats on old work

86

113

9724.88

... More
Miscellaneous

-

-

-

... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

-

-

-

... More
In cement mortar

2.76

2266

6254.767199999999

... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

-

-

-

... More
Cement mortar 1:6 (1 cement : 6 coarse sand)

1.06

10016

10617.543

... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 75 in superstructure above plinth level up to floor V level.

-

-

-

... More
Cement mortar 1:4 (1 cement :4 coarse sand

3.8

1236

4697.484

... More
Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry.

3.8

115

438.06399999999996

... More
ELECTRICAL WORK OF GIRLS DORMITORY (G) FOR 48 STUDENTS

-

-

-

... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.

-

-

-

... More
Group B

24

1523

36570

... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

5

1536

7682.05

... More
Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

5

352

1761

... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

-

-

-

... More
2X1.5 sq. mm + 1 X 1.5 sq. mm earth wire

30

245

7371

... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire

15

352

5283

... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire

5

462

2314.65

... More
Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable and 1.5 sq.mm. FR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required.

-

-

-

... More
Group B

5

942

4713.6

... More
Rewiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.

4

942

3770.88

... More
Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

-

-

-

... More
2 x 1.5 sq. mm

20

73

1476.3999999999999

... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

-

-

-

45

152

6880.5

30

194

5820.9

... More
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.

-

-

-

... More
100 mm X 100 mm X 60 mm deep

5

220

1101.9499999999998

... More
150 mm X 75 mm X 60 mm deep

4

327

1311.8

... More
Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings).

5

377

1887.55

... More
Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required.

5

514

2573

... More
Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

20

91

1834.8

... More
Supplying and fixing brass batten/ angle holder including connection etc. as required.

15

138

2072.1

... More
Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.

4

104

417.6

... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

-

-

-

... More
4 way (4 + 12), Double door

1

4313

4313.96

... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

-

-

-

... More
Single pole

6

269

1619.6999999999998

... More
Single pole and neutral

2

631

1263.3

... More
Triple pole

1

1061

1061.88

... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

10

13

137.10000000000002

... More
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

1

283

283.66

... More
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

22

217

4779.0599999999995

... More
Supply of 15W SURFACE MOUNTED ROUND LED with all accessories as per standard item..

2

1345

2690

... More
Supply of 20W SURFACE MOUNTED ROUND LED with all accessories as per standard item..(Such as Panasonic ADL04R206 or Equivalent).

4

953

3812

... More
Supply of 15W WALL BRACKET LED BULB with all accessories as per standard item..(Such as Panasonic PBUM01157 or Equivalent).

8

378

3024

... More
Supply of 20W SURFACE MOUNTED LED TUBE with all accessories as per standard item..(Such as Panasonic PBTM01207 or Equivalent).

8

897

7176

... More
BOYS DORM - CPWD ( 1 BLOCK)

-

-

-

... More
Structural Repair & Retrofitting

-

-

-

... More
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge

-

-

-

... More
50mm average thickness

14.58

281

4111.4142

... More
Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.

-

-

-

... More
Bars upto 12 mm diameter

233.28

9

2118.1824

... More
Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge.

14.58

420

6132.9312

... More
Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineerin- Charge

-

-

-

... More
Note: Rates shall include the providing necessary ground wires etc. The levelling gauges, if used, shall be paid for separately. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/ tapping with a blunt metal instrument.

-

-

-

... More
50mm thick in Grade M 25 with cement content not less than 330 kg per cum

14.58

1266

18460.612800000003

... More
Repairs to Roof

-

-

-

... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

-

-

-

... More
In cement mortar

23.78

2266

53890.711599999995

... More
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the samemembrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick

198.09

591

117110.808

... More
Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation.

198.09

97

19371.221100000002

... More
Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

14.85

8846

131370.9705

... More
Repair to Toilets

-

-

-

... More
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

-

-

-

... More
For thickness of tiles 10 mm to 25 mm

87.43

80

7059.0982

... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

87.43

1394

121942.99250000001

... More
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :

-

-

-

... More
75 to 80 mm dia pipe

15

83

1249.05

... More
Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :

-

-

-

... More
15 mm to 40 mm nominal bore

35

164

5767.3

... More
Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge:

-

-

-

... More
Up to 150 mm diameter

15

365

5484.599999999999

... More
Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge.

2

767

1534.28

... More
Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap.

2

1054

2109.26

... More
Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

2

147

295.02

... More
Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres

-

-

-

... More
Up to 150 mm diameter

1

351

351.45

... More
Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including stacking of useful materials near the site and disposal of unserviceable materials within 50 m lead as per direction of Engineer- charge :

-

-

-

... More
Rectangular manhole 90x80 cm and 45 cm deep

2

2794

5589.88

... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

-

-

-

... More
110 mm diameter

15

415

6227.099999999999

... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

-

-

-

... More
a) Coupler

-

-

-

... More
110 mm

5

149

748.85

... More
b) Bend 87.5°

-

-

-

... More
110 mm bend

5

165

826.9499999999999

... More
Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work :

-

-

-

... More
75 mm diameter pipes

5

31

155.1

... More
100 mm diameter pipes

10

39

398.8

... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

-

-

-

... More
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

2

7444

14888.28

... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.

-

-

-

... More
W.C. pan with ISI marked white solid plastic seat and lid

2

7167

14334.22

... More
Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standard pattern including cutting & making good the walls wherever required.

-

-

-

... More
a) Flat back wash Basin size 550x400 mm with single 15mm C.P. brass pillar tap.

2

2067

4134.24

... More
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.

-

-

-

... More
a) 32mm dia (for wash basin)

2

131

263.02

... More
b) 40mm dia (for sink and urinal)

-

-

-

... More
Providing & fixing C.P. Brass health faucet for ablution with 1 meter long PVC tube, hand shower, couplings, wall hook and other accessories.

2

1831

3662

... More
Providing and fixing CP Brass soap dish 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket and all fittings of the same material of approved quality and colour.

2

617

1234

... More
Providing & fixing C.P. Brass Waste Coupling for PVC waste Pipe.

6

1730

10380

... More
Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382.The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-charge at site.

-

-

-

... More
110 mm dia (Wall Thickness - 3.2 to 3.8 mm)

10

750

7500

... More
75 mm dia (Wall Thickness - 3.2 to 3.8 mm)

10

550

5500

... More
Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating complete in all respects.

-

-

-

... More
Multi Floor Trap (5" Ht) with height raiser and branch saddle strip of 50/75 mm outlet

2

673

1346

... More
Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser

2

831

1662

... More
P-Trap type Floor Trap 110 x 75 mm

2

565

1130

... More
Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps.

6

597

3582

... More
Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round cover with screws and other required fitting complete as required.

4

389

1556

... More
Providing and fixing 100 mm sand cast Iron grating for gully trap.

4

58

234.32

... More
Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers.

2

1768

3537.5

... More
Providing and fixing toilet paper holder :

-

-

-

... More
Vitreous china

2

600

1201.98

... More
Providing & fixing soil, waste and vent pipes.

-

-

-

... More
a) 100mm dia centrifugally cast iron S & S pipe.

5

1298

6494.15

... More
b) 75mm dia centrifugally cast iron S & S pipe.

5

1304

6523

... More
Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size). Including cost of cutting holes & making good the walls etc.

-

-

-

... More
a) for 100mm dia pipe.

2

399

798.28

... More
b) for 75mm dia pipe.

2

396

792

... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.

-

-

-

... More
a) 100mm

-

-

-

... More
Sand cast iron S&S as per IS - 3989

2

775

1551.44

... More
b) 75mm

-

-

-

... More
Sand cast iron S&S as per IS- 3989

2

575

1150.16

... More
Providing and fixing plain cast iron S & S sanitary bend.

-

-

-

... More
a) 100mm

-

-

-

... More
Sand cast iron S&S as per IS - 1729

2

517

1035

... More
b) 75mm

-

-

-

... More
Sand cast iron S&S as per IS - 3989

2

429

859.1

... More
Providing and fixing centrifugaly cast iron single equal plain junction of required degree.

-

-

-

... More
a) 100x100x100mm

2

799

1598.42

... More
b) 75x75x75mm

2

692

1384.9

... More
Providing and fixing cast iron terminal guard.

-

-

-

... More
a) 100mm

2

556

1113.2

... More
b) 75mm

2

445

890.46

... More
Providing & fixing cast iron coller.

-

-

-

... More
a) 100 mm

-

-

-

... More
Sand cast iron S&S as per IS - 3989

2

564

1128.94

... More
b) 75mm dia.

-

-

-

... More
Sand cast iron S&S as per IS - 3989

2

398

796.52

... More
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters.

-

-

-

... More
a) 100mm

3

684

2054.25

... More
b) 75mm

4

578

2315.52

... More
Providing & fixing cast iron trap of self cleansing design with or without ventarm complete, including cost of cutting & making good the walls & floors.

-

-

-

... More
a) 100mm inlet & 75mm outlet.

2

2172

4345.34

... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

-

-

-

... More
15 mm nominal outer dia Pipes

15

547

8213.7

... More
20 mm nominal outer dia Pipes

10

591

5913.6

... More
25 mm nominal outer dia Pipes

5

689

3449.9

... More
32 mm nominal outer dia Pipes

5

813

4066.15

... More
Providing and fixing brass stop cock of approved quality.

-

-

-

... More
15 mm nominal bore

5

388

1942.8999999999999

... More
Providing and fixing gun metal gate valve with wheel of approved quality.

-

-

-

... More
a) 25mm dia nominal bore

4

684

2738.56

... More
b) 32mm dia nominal bore

4

758

3034.24

... More
Providing and fixing ball valve (brass) of approved quality complete. (High or low pressure with plastic floats).

-

-

-

... More
a) 25mm. Nominal bore

4

510

2041.84

... More
Providing and fixing 30 cm long unplasticised PVC connection pipe with brass unions.

-

-

-

... More
a) 15mm nominal bore

4

93

374

... More
Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions.

-

-

-

... More
a) 15mm nominal bore

4

107

430.12

... More
Providing & fixing CP brass bib cock of approved quality conforming to IS 8931

-

-

-

... More
a) 15mm nominal bore

10

557

5574.8

... More
Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.

-

-

-

... More
a) 15mm nominal bore

1

878

878.85

... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

-

-

-

... More
15mm nominal bore

2

631

1263.46

... More
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

2

82

164.56

... More
Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.

-

-

-

... More
25mm nominal bore, weighing not less than 62 gms

2

124

249.38

... More
Cutting holes up to 30x30 cm in walls including making good the same:

-

-

-

... More
With common burnt clay F.P.S. (non modular) bricks

4

458

1833.92

... More
Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)

4000

-

2200

... More
Repair to Plaster and Plinth Protection

-

-

-

... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.

-

-

-

... More
Two or more coats on new work

3.65

1653

6036.954

... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

90.77

824

74815.3571

... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

48.785

60

2932.9541999999997

... More
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

189.56

27

5245.1252

... More
15mm cement plaster on rough side of single or half brick wall of mix

-

-

-

... More
1:6 (1 cement : 6 course sand)

49.225

434

21407.46025

... More
6mm cement plaster to ceiling of mix :

-

-

-

... More
1:3 ( 1 cement : 3 fine sand)

7.2

330

2379.6

... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour

-

-

-

... More
New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre

56.43

204

11524.1346

... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour 13.81.1 Old work (one or more coats)

-

-

-

... More
Old work (one or more coats)

189.56

68

13073.9532

... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

56.43

171

9686.773799999999

... More
Repairs to Door / Windows

-

-

-

... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

-

-

-

... More
Of area 3 sq. metres and below

9

403

3635.28

... More
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :

-

-

-

... More
Of area 3 sq. metres and below

5

157

789.25

... More
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:

-

-

-

... More
Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

31.5

1199

37791.18

... More
Renewal of old putty of glass panes (length)

213

61

13157.01

... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete .Fixed to steel windows by welding

8.64

241

2082.3264

... More
Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete

-

-

-

... More
250 mm weighing not less than 150gms.

8

67

537.28

... More
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :

-

-

-

... More
100X58X1.90 mm

24

117

2827.44

... More
Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm .

8

560

4480

... More
Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete.

-

-

-

... More
300 x 10mm

8

448

3584

... More
150 x 10mm

8

392

3136

... More
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. (a) 125 mm.

-

-

-

... More
125 mm

16

131

2097.92

... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

-

-

-

... More
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

5.04

2631

13264.8768

... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

5.04

508

2563.2936

... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

9.45

2389

22578.979499999998

... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.5 mm thick.

11.25

1150

12943.6875

... More
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.

-

-

-

... More
With 12 mm mild steel U beading

41.58

1350

56166.263999999996

... More
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).

-

-

-

... More
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size

77.76

144

11209.8816

... More
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer

-

-

-

... More
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size

116.1

155

18096.507

... More
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.

-

-

-

... More
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

10.52

214

2258.8543999999997

... More
Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with

-

-

-

... More
4.0 mm thick glass panes

2.88

1171

3372.8255999999997

... More
Applying priming coat :

-

-

-

... More
With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood.

34.78

82

2856.1336

... More
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works

8.43

74

625.0002

... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

-

-

-

... More
Two or more coats on new work

43.21

171

7410.0829

... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

-

-

-

... More
One or more coats on old work

86

113

9724.88

... More
Repairs to Flooring

-

-

-

... More
Miscellaneous

-

-

-

... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

-

-

-

... More
In cement mortar

2.76

2266

6254.767199999999

... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

-

-

-

... More
Cement mortar 1:6 (1 cement : 6 coarse sand)

1.06

10016

10617.543

... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 75 in superstructure above plinth level up to floor V level.

-

-

-

... More
Cement mortar 1:4 (1 cement :4 coarse sand

3.8

1236

4697.484

... More
Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry.

3.8

115

438.06399999999996

... More
ELECTRICAL WORK OF BOYS DORM - 24 CPWD ( 1 BLOCK)

-

-

-

... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.

-

-

-

... More
Group B

24

1523

36570

... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

5

1536

7682.05

... More
Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

5

352

1761

... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

-

-

-

... More
2X1.5 sq. mm + 1 X 1.5 sq. mm earth wire

15

245

3685.5

... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire

10

352

3522

... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire

5

462

2314.65

... More
Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable and 1.5 sq.mm. FR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required.

-

-

-

... More
Group B

5

942

4713.6

... More
Rewiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.

4

942

3770.88

... More
Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

-

-

-

... More
2 x 1.5 sq. mm

20

73

1476.3999999999999

... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

-

-

-

25

152

3822.5

10

194

1940.3

... More
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.

-

-

-

... More
100 mm X 100 mm X 60 mm deep

2

220

440.78

... More
150 mm X 75 mm X 60 mm deep

2

327

655.9

... More
Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings).

2

377

755.02

... More
Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required.

2

514

1029.2

... More
Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

20

91

1834.8

... More
Supplying and fixing brass batten/ angle holder including connection etc. as required.

15

138

2072.1

... More
Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.

4

104

417.6

... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

-

-

-

... More
4 way (4 + 12), Double door

1

4313

4313.96

... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

-

-

-

... More
Single pole

3

269

809.8499999999999

... More
Single pole and neutral

1

631

631.65

... More
Triple pole

1

1061

1061.88

... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

10

13

137.10000000000002

... More
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

1

283

283.66

... More
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

20

217

4344.599999999999

... More
Supply of 15W SURFACE MOUNTED ROUND LED with all accessories as per standard item..

2

1345

2690

... More
Supply of 20W SURFACE MOUNTED ROUND LED with all accessories as per standard item..(Such as Panasonic ADL04R206 or Equivalent).

4

953

3812

... More
Supply of 15W WALL BRACKET LED BULB with all accessories as per standard item..(Such as Panasonic PBUM01157 or Equivalent).

8

378

3024

... More
Supply of 20W SURFACE MOUNTED LED TUBE with all accessories as per standard item..(Such as Panasonic PBTM01207 or Equivalent).

6

897

5382

... More
Staff Qtrs Type-III . (12 nos. i.e. 3 blocks of four unit each) G+1

-

-

-

... More
Structural Repair & Retrofitting

-

-

-

... More
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge

-

-

-

... More
25 mm average thickness

10.11

139

1409.6373

... More
Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.

-

-

-

... More
Bars upto 12 mm diameter

161.76

9

1468.7808

... More
Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge.

12.84

420

5401.0176

... More
Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineerin- Charge

-

-

-

... More
Note: Rates shall include the providing necessary ground wires etc. The levelling gauges, if used, shall be paid for separately. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/ tapping with a blunt metal instrument.

-

-

-

... More
25mm thick in Grade M 25 with cement content not less than 330 kg per cum

10.11

821

8306.2749

... More
Repairs to Roof

-

-

-

... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

-

-

-

... More
In cement mortar

21.12

2266

47862.566399999996

... More
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the samemembrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick

351.93

591

208061.01600000003

... More
Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation.

351.93

97

34415.2347

... More
Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

26.37

8846

233282.99610000002

... More
Repair to Toilets

-

-

-

... More
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

-

-

-

... More
For thickness of tiles 10 mm to 25 mm

111.12

80

8971.8288

... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

21.66

1206

26126.5086

... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

89.46

1394

124774.33499999999

... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

41.4

678

28100.663999999997

... More
Providing and filling of cinder in sunken portions.

5.43

2240

12163.199999999999

... More
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :

-

-

-

... More
75 to 80 mm dia pipe

135

83

11241.449999999999

... More
Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :

-

-

-

... More
15 mm to 40 mm nominal bore

135

164

22245.3

... More
Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge:

-

-

-

... More
Up to 150 mm diameter

135

365

49361.4

... More
Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge.

12

767

9205.68

... More
Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap.

6

1054

6327.780000000001

... More
Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

6

147

885.06

... More
Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres

-

-

-

... More
Up to 150 mm diameter

12

351

4217.4

... More
Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including stacking of useful materials near the site and disposal of unserviceable materials within 50 m lead as per direction of Engineer- charge :

-

-

-

... More
Rectangular manhole 90x80 cm and 45 cm deep

12

2794

33539.28

... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

-

-

-

... More
110 mm diameter

135

415

56043.9

... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

-

-

-

... More
a) Coupler

-

-

-

... More
110 mm

24

149

3594.4800000000005

... More
b) Bend 87.5°

-

-

-

... More
110 mm bend

48

165

7938.719999999999

... More
Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work :

-

-

-

... More
75 mm diameter pipes

15

31

465.3

... More
100 mm diameter pipes

30

39

1196.4

... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

-

-

-

... More
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

6

7444

44664.840000000004

... More
Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standard pattern including cutting & making good the walls wherever required.

-

-

-

... More
a) Flat back wash Basin size 550x400 mm with single 15mm C.P. brass pillar tap.

6

2067

12402.72

... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :

-

-

-

... More
Kitchen sink without drain board

-

-

-

... More
610x510 mm bowl depth 200 mm

-

-

-

... More
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.

-

-

-

... More
a) 32mm dia (for wash basin)

6

131

789.06

... More
b) 40mm dia (for sink and urinal)

-

-

-

... More
Providing & fixing CP brass Overhead shower with shower arm, Hand Shower 95mm dia Single Lever Concealed Deusch Mixer with Provision for Connection to Overhead Shower and Easy flex Tube with accessories complete I all respect

6

5108

30648

... More
Providing and fixing of C. P. brass towel rail 600 x 20 mm size complete with C.P. brass brackets

6

2869

17214

... More
Providing and fixing of C. P. brass towel ring complete with C.P. brass brackets

6

1095

6570

... More
Providing and fixing CP Brass soap dish 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket and all fittings of the same material of approved quality and colour.

-

-

-

... More
Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms

6

134

807.8399999999999

... More
Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382.

-

-

-

... More
The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-charge at site.

-

-

-

... More
110 mm dia (Wall Thickness - 3.2 to 3.8 mm)

90

750

67500

... More
75 mm dia (Wall Thickness - 3.2 to 3.8 mm)

45

550

24750

... More
Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating complete in all respects.

-

-

-

... More
Multi Floor Trap (5" Ht) with height raiser and branch saddle strip of 50/75 mm outlet

12

673

8076

... More
Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser

48

831

39888

... More
P-Trap type Floor Trap 110 x 75 mm

12

565

6780

... More
Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps.

72

597

42984

... More
Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round cover with screws and other required fitting complete as required.

12

389

4668

... More
Providing and fixing 100 mm sand cast Iron grating for gully trap.

6

58

351.48

... More
Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers.

12

1768

21225

... More
Providing & fixing soil, waste and vent pipes.

-

-

-

... More
a) 100mm dia centrifugally cast iron S & S pipe.

30

1298

38964.899999999994

... More
b) 75mm dia centrifugally cast iron S & S pipe.

15

1304

19569

... More
Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size). Including cost of cutting holes & making good the walls etc.

-

-

-

... More
a) for 100mm dia pipe.

6

399

2394.84

... More
b) for 75mm dia pipe.

6

396

2376

... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.

-

-

-

... More
a) 100mm

-

-

-

... More
Sand cast iron S&S as per IS - 3989

6

775

4654.32

... More
b) 75mm

-

-

-

... More
Sand cast iron S&S as per IS- 3989

6

575

3450.4800000000005

... More
Providing and fixing plain cast iron S & S sanitary bend.

-

-

-

... More
a) 100mm

-

-

-

... More
Sand cast iron S&S as per IS - 1729

6

517

3105

... More
b) 75mm

-

-

-

... More
Sand cast iron S&S as per IS - 3989

6

429

2577.3

... More
Providing and fixing centrifugaly cast iron single equal plain junction of required degree.

-

-

-

... More
a) 100x100x100mm

6

799

4795.26

... More
b) 75x75x75mm

6

692

4154.700000000001

... More
Providing and fixing cast iron terminal guard.

-

-

-

... More
a) 100mm

6

556

3339.6000000000004

... More
b) 75mm

6

445

2671.38

... More
Providing & fixing cast iron coller.

-

-

-

... More
a) 100 mm

-

-

-

... More
Sand cast iron S&S as per IS - 3989

6

564

3386.82

... More
b) 75mm dia.

-

-

-

... More
Sand cast iron S&S as per IS - 3989

6

398

2389.56

... More
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters.

-

-

-

... More
a) 100mm

6

684

4108.5

... More
b) 75mm

6

578

3473.2799999999997

... More
Providing & fixing cast iron trap of self cleansing design with or without ventarm complete, including cost of cutting & making good the walls & floors.

-

-

-

... More
a) 100mm inlet & 75mm outlet.

6

2172

13036.02

... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

-

-

-

... More
15 mm nominal outer dia Pipes

105

547

57495.9

... More
20 mm nominal outer dia Pipes

90

591

53222.4

... More
25 mm nominal outer dia Pipes

60

689

41398.8

... More
32 mm nominal outer dia Pipes

30

813

24396.9

... More
Providing and fixing brass stop cock of approved quality.

-

-

-

... More
15 mm nominal bore

12

388

4662.96

... More
Providing and fixing gun metal gate valve with wheel of approved quality.

-

-

-

... More
a) 25mm dia nominal bore

6

684

4107.84

... More
b) 32mm dia nominal bore

6

758

4551.36

... More
Providing and fixing ball valve (brass) of approved quality complete. (High or low pressure with plastic floats).

-

-

-

... More
a) 25mm. Nominal bore

6

510

3062.7599999999998

... More
Providing and fixing 30 cm long unplasticised PVC connection pipe with brass unions.

-

-

-

... More
a) 15mm nominal bore

6

93

561

... More
Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions.

-

-

-

... More
a) 15mm nominal bore

6

107

645.1800000000001

... More
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation 3concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :

-

-

-

... More
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

6

2191

13151.16

... More
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :

-

-

-

... More
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

6

11948

71691.84

... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

1500

12

18150

... More
Providing & fixing CP brass bib cock of approved quality conforming to IS 8931

-

-

-

... More
a) 15mm nominal bore

12

557

6689.76

... More
Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.

-

-

-

... More
a) 15mm nominal bore

6

878

5273.1

... More
Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931

-

-

-

... More
a) 15mm nominal bore

6

631

3790.38

... More
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

12

82

987.36

... More
Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.

-

-

-

... More
25mm nominal bore, weighing not less than 62 gms

3

124

374.07

... More
Cutting holes up to 30x30 cm in walls including making good the same:

-

-

-

... More
With common burnt clay F.P.S. (non modular) bricks

18

458

8252.64

... More
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

12

497

5966.4

... More
Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.

75

223

16739.25

... More
Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately) :

-

-

-

... More
Rectangular manhole 90x80 cm with rectangular cover 600 x 450 mm of grade LD - 2.5

6

2888

17328.300000000003

... More
Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)

6000

-

3300.0000000000005

... More
Repair to Plaster and Plinth Protection

-

-

-

... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

-

-

-

... More
Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

6

1653

9923.76

... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

150.45

824

124005.4035

... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

94.86

60

5702.9832

... More
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

469.92

27

13002.6864

... More
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge.

-

-

-

... More
With cement mortar 1:4 (1cement: 4 coarse sand)

109.23

616

67345.7565

... More
12mm cement plaster of mix :

-

-

-

... More
1:6 (1 cement : 6 course sand)

81.19

434

35308.719099999995

... More
Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand):

-

-

-

... More
Raised and cut pointing

9.81

461

4531.1409

... More
6mm cement plaster to ceiling of mix :

-

-

-

... More
1:3 ( 1 cement : 3 fine sand)

13.68

330

4521.24

... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour

-

-

-

... More
New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre

94.86

204

19372.3092

... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour 13.81.1 Old work (one or more coats)

-

-

-

... More
Old work (one or more coats)

215.01

68

14829.239699999998

... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

94.86

171

16283.667599999999

... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:

-

-

-

... More
New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

109.23

188

20558.178300000003

... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade

-

-

-

... More
Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface

254.91

144

36816.6513

... More
Repairs to Door / Windows

-

-

-

... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

-

-

-

... More
Of area 3 sq. metres and below

24

403

9694.08

... More
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :

-

-

-

... More
Of area 3 sq. metres and below

24

157

3788.3999999999996

... More
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:

-

-

-

... More
Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

3.24

1199

3887.0928000000004

... More
Renewal of old putty of glass panes (length)

25.2

61

1556.604

... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding

19.44

241

4685.2344

... More
Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete

-

-

-

... More
250 mm weighing not less than 150gms.

24

67

1611.84

... More
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :

-

-

-

... More
100X58X1.90 mm

72

117

8482.32

... More
Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm .

72

560

40320

... More
Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete.

-

-

-

... More
300 x 10mm

24

448

10752

... More
150 x 10mm

24

392

9408

... More
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. (a) 125 mm.

-

-

-

... More
125 mm

48

131

6293.76

... More
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

198

155

30862.260000000002

... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

36

2389

86015.16

... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.5 mm thick.

45

1150

51774.75

... More
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).

-

-

-

... More
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size

58.32

144

8407.4112

... More
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.

-

-

-

... More
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

122.73

214

26352.585600000002

... More
Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with

-

-

-

... More
4.0 mm thick glass panes

3.24

1171

3794.4287999999997

... More
Applying priming coat :

-

-

-

... More
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works

3.24

74

240.2136

... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

-

-

-

... More
Two or more coats on new work

3.24

171

555.6276

... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

-

-

-

... More
One or more coats on old work

3.24

113

366.3792

... More
Miscellaneous

-

-

-

... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

-

-

-

... More
Cement mortar 1:6 (1 cement : 6 coarse sand)

1.35

10016

13522.3425

... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 75 in superstructure above plinth level up to floor V level.

-

-

-

... More
Cement mortar 1:4 (1 cement :4 coarse sand

11.64

1236

14389.1352

... More
Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry.

11.64

115

1341.8592

... More
ELECTRICAL WORK OF TYPE-III (G+1)

-

-

-

... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.

-

-

-

... More
Group B

108

1223

132107.76

... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

24

1536

36873.840000000004

... More
Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

75

352

26415

... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

-

-

-

... More
2X1.5 sq. mm + 1 X 1.5 sq. mm earth wire

165

245

40540.5

... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire

135

352

47547

... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire

105

462

48607.65

... More
Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable and 1.5 sq.mm. FR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required.

-

-

-

... More
Group B

30

671

20151.600000000002

... More
Rewiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.

12

942

11312.64

... More
Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

-

-

-

... More
2 x 1.5 sq. mm

48

73

3543.3599999999997

... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

-

-

-

75

152

11467.5

60

194

11641.8

... More
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.

-

-

-

... More
100 mm X 100 mm X 60 mm deep

6

220

1322.34

... More
150 mm X 75 mm X 60 mm deep

6

327

1967.6999999999998

... More
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

6

389

2334.66

... More
Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings).

6

377

2265.06

... More
Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required.

6

514

3087.6000000000004

... More
S/F light plug point Modular type accessories :-

-

-

-

... More
Supply and fixing of suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps. modular switch, connection etc. as required.

15

503

7545

... More
S/F power plug point modular type accessories :-

-

-

-

... More
Supply and fixing of suitable size GI box with modular plate and cover in FRLSont on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps. modular switch, connection etc. as required.

15

617

9269.1

... More
Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

6

91

550.4399999999999

... More
Supplying and fixing brass batten/ angle holder including connection etc. as required.

6

138

828.8399999999999

... More
Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.

3

104

313.20000000000005

... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

-

-

-

... More
6 way, Double door

-

-

-

... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

-

-

-

... More
4 way (4 + 12), Double door

3

4313

12941.880000000001

... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

-

-

-

... More
Single pole

45

269

12147.75

... More
Single pole and neutral

6

631

3789.8999999999996

... More
Triple pole

6

1061

6371.280000000001

... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

15

13

205.65

... More
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

3

283

850.98

... More
Earthing with G.I. earth pipe 4.5 Mtr long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

6

7228

43371.600000000006

... More
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

30

302

9079.199999999999

... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

30

257

7719

... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

30

73

2214.6

... More
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

24

217

5213.5199999999995

... More
Supply of 15W SURFACE MOUNTED ROUND LED with all accessories as per standard item..

6

1345

8070

... More
Supply of 20W SURFACE MOUNTED ROUND LED with all accessories as per standard item..(Such as Panasonic ADL04R206 or Equivalent).

6

953

5718

... More
Supply of 15W WALL BRACKET LED BULB with all accessories as per standard item..(Such as Panasonic PBUM01157 or Equivalent).

6

378

2268

... More
Supply of 20W SURFACE MOUNTED LED TUBE with all accessories as per standard item..(Such as Panasonic PBTM01207 or Equivalent).

6

897

5382

... More
Type-II Staff Qtrs. (12 nos. i.e. 3 block of 4 unit each) G+1

-

-

-

... More
Structural Repair & Retrofitting

-

-

-

... More
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge

-

-

-

... More
25 mm average thickness

32.52

139

4534.2636

... More
Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.

-

-

-

... More
Bars upto 12 mm diameter

520.32

9

4724.5056

... More
Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge.

12.84

420

5401.0176

... More
Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineerin- Charge

-

-

-

... More
Note: Rates shall include the providing necessary ground wires etc. The levelling gauges, if used, shall be paid for separately. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/ tapping with a blunt metal instrument.

-

-

-

... More
25mm thick in Grade M 25 with cement content not less than 330 kg per cum

32.52

821

26718.106800000005

... More
Repairs to Roof

-

-

-

... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

-

-

-

... More
In cement mortar

19.17

2266

43443.4374

... More
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the samemembrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick

376.23

591

222427.17600000004

... More
Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation.

376.23

97

36791.53170000001

... More
Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

23.94

8846

211785.92820000002

... More
Repair to Toilets

-

-

-

... More
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

-

-

-

... More
For thickness of tiles 10 mm to 25 mm

162.96

80

13157.3904

... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

21.66

1206

26126.5086

... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

224.1

1394

312563.475

... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

41.4

678

28100.663999999997

... More
Providing and filling of cinder in sunken portions.

5.43

2240

12163.199999999999

... More
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :

-

-

-

... More
75 to 80 mm dia pipe

135

83

11241.449999999999

... More
Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :

-

-

-

... More
15 mm to 40 mm nominal bore

135

164

22245.3

... More
Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge:

-

-

-

... More
Up to 150 mm diameter

135

365

49361.4

... More
Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge.

12

767

9205.68

... More
Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap.

6

1054

6327.780000000001

... More
Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

6

147

885.06

... More
Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres

-

-

-

... More
Up to 150 mm diameter

12

351

4217.4

... More
Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including stacking of useful materials near the site and disposal of unserviceable materials within 50 m lead as per direction of Engineer- charge :

-

-

-

... More
Rectangular manhole 90x80 cm and 45 cm deep

12

2794

33539.28

... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

-

-

-

... More
110 mm diameter

135

415

56043.9

... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

-

-

-

... More
a) Coupler

-

-

-

... More
110 mm

24

149

3594.4800000000005

... More
b) Bend 87.5°

-

-

-

... More
110 mm bend

48

165

7938.719999999999

... More
Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work :

-

-

-

... More
75 mm diameter pipes

15

31

465.3

... More
100 mm diameter pipes

30

39

1196.4

... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

-

-

-

... More
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

6

7444

44664.840000000004

... More
Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standard pattern including cutting & making good the walls wherever required.

-

-

-

... More
a) Flat back wash Basin size 550x400 mm with single 15mm C.P. brass pillar tap.

6

2067

12402.72

... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :

-

-

-

... More
Kitchen sink without drain board

-

-

-

... More
610x510 mm bowl depth 200 mm

-

-

-

... More
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.

-

-

-

... More
a) 32mm dia (for wash basin)

6

131

789.06

... More
b) 40mm dia (for sink and urinal)

-

-

-

... More
Providing & fixing CP brass Overhead shower with shower arm, Hand Shower 95mm dia Single Lever Concealed Deusch Mixer with Provision for Connection to Overhead Shower and Easy flex Tube with accessories complete I all respect

6

5108

30648

... More
Providing and fixing of C. P. brass towel rail 600 x 20 mm size complete with C.P. brass brackets

6

2869

17214

... More
Providing and fixing of C. P. brass towel ring complete with C.P. brass brackets

6

1095

6570

... More
Providing and fixing CP Brass soap dish 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket and all fittings of the same material of approved quality and colour.

-

-

-

... More
Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms

6

134

807.8399999999999

... More
Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382.

-

-

-

... More
The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-charge at site.

-

-

-

... More
110 mm dia (Wall Thickness - 3.2 to 3.8 mm)

75

750

56250

... More
75 mm dia (Wall Thickness - 3.2 to 3.8 mm)

45

550

24750

... More
Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating complete in all respects.

-

-

-

... More
Multi Floor Trap (5" Ht) with height raiser and branch saddle strip of 50/75 mm outlet

12

673

8076

... More
Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser

48

831

39888

... More
P-Trap type Floor Trap 110 x 75 mm

12

565

6780

... More
Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps.

72

597

42984

... More
Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round cover with screws and other required fitting complete as required.

12

389

4668

... More
Providing and fixing 100 mm sand cast Iron grating for gully trap.

6

58

351.48

... More
Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers.

12

1768

21225

... More
Providing & fixing soil, waste and vent pipes.

-

-

-

... More
a) 100mm dia centrifugally cast iron S & S pipe.

30

1298

38964.899999999994

... More
b) 75mm dia centrifugally cast iron S & S pipe.

15

1304

19569

... More
Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size). Including cost of cutting holes & making good the walls etc.

-

-

-

... More
a) for 100mm dia pipe.

6

399

2394.84

... More
b) for 75mm dia pipe.

6

396

2376

... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.

-

-

-

... More
a) 100mm

-

-

-

... More
Sand cast iron S&S as per IS - 3989

6

775

4654.32

... More
b) 75mm

-

-

-

... More
Sand cast iron S&S as per IS- 3989

6

575

3450.4800000000005

... More
Providing and fixing plain cast iron S & S sanitary bend.

-

-

-

... More
a) 100mm

-

-

-

... More
Sand cast iron S&S as per IS - 1729

6

517

3105

... More
b) 75mm

-

-

-

... More
Sand cast iron S&S as per IS - 3989

6

429

2577.3

... More
Providing and fixing centrifugaly cast iron single equal plain junction of required degree.

-

-

-

... More
a) 100x100x100mm

6

799

4795.26

... More
b) 75x75x75mm

6

692

4154.700000000001

... More
Providing and fixing cast iron terminal guard.

-

-

-

... More
a) 100mm

6

556

3339.6000000000004

... More
b) 75mm

6

445

2671.38

... More
Providing & fixing cast iron coller.

-

-

-

... More
a) 100 mm

-

-

-

... More
Sand cast iron S&S as per IS - 3989

6

564

3386.82

... More
b) 75mm dia.

-

-

-

... More
Sand cast iron S&S as per IS - 3989

6

398

2389.56

... More
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters.

-

-

-

... More
a) 100mm

6

684

4108.5

... More
b) 75mm

6

578

3473.2799999999997

... More
Providing & fixing cast iron trap of self cleansing design with or without ventarm complete, including cost of cutting & making good the walls & floors.

-

-

-

... More
a) 100mm inlet & 75mm outlet.

6

2172

13036.02

... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

-

-

-

... More
15 mm nominal outer dia Pipes

105

547

57495.9

... More
20 mm nominal outer dia Pipes

90

591

53222.4

... More
25 mm nominal outer dia Pipes

60

689

41398.8

... More
32 mm nominal outer dia Pipes

30

813

24396.9

... More
Providing and fixing brass stop cock of approved quality.

-

-

-

... More
15 mm nominal bore

12

388

4662.96

... More
Providing and fixing gun metal gate valve with wheel of approved quality.

-

-

-

... More
a) 25mm dia nominal bore

6

684

4107.84

... More
b) 32mm dia nominal bore

6

758

4551.36

... More
Providing and fixing ball valve (brass) of approved quality complete. (High or low pressure with plastic floats).

-

-

-

... More
a) 25mm. Nominal bore

6

510

3062.7599999999998

... More
Providing and fixing 30 cm long unplasticised PVC connection pipe with brass unions.

-

-

-

... More
a) 15mm nominal bore

6

93

561

... More
Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions.

-

-

-

... More
a) 15mm nominal bore

6

107

645.1800000000001

... More
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation 3concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :

-

-

-

... More
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

6

2191

13151.16

... More
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :

-

-

-

... More
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

6

11948

71691.84

... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

1500

12

18150

... More
Providing & fixing CP brass bib cock of approved quality conforming to IS 8931

-

-

-

... More
a) 15mm nominal bore

12

557

6689.76

... More
Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.

-

-

-

... More
a) 15mm nominal bore

6

878

5273.1

... More
Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931

-

-

-

... More
a) 15mm nominal bore

6

631

3790.38

... More
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

12

82

987.36

... More
Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.

-

-

-

... More
25mm nominal bore, weighing not less than 62 gms

3

124

374.07

... More
Cutting holes up to 30x30 cm in walls including making good the same:

-

-

-

... More
With common burnt clay F.P.S. (non modular) bricks

18

458

8252.64

... More
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

12

497

5966.4

... More
Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.

75

223

16739.25

... More
Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately) :

-

-

-

... More
Rectangular manhole 90x80 cm with rectangular cover 600 x 450 mm of grade LD - 2.5

6

2888

17328.300000000003

... More
Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)

6000

-

3300.0000000000005

... More
Repair to Plaster and Plinth Protection

-

-

-

... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

-

-

-

... More
Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

5.67

1653

9377.9532

... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

142.26

824

117254.9598

... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

71.67

60

4308.8004

... More
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

652.41

27

18052.1847

... More
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge.

-

-

-

... More
With cement mortar 1:4 (1cement: 4 coarse sand)

186.3

616

114863.265

... More
15mm cement plaster of mix :

-

-

-

... More
1:6 (1 cement : 6 course sand)

57.99

434

25219.2711

... More
Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand):

-

-

-

... More
Raised and cut pointing

9.81

461

4531.1409

... More
6mm cement plaster to ceiling of mix :

-

-

-

... More
1:3 ( 1 cement : 3 fine sand)

13.68

330

4521.24

... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour

-

-

-

... More
New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre

71.67

204

14636.447400000001

... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour

-

-

-

... More
Old work (one or more coats)

217.74

68

15017.5278

... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

71.67

171

12302.8722

... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:

-

-

-

... More
New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

186.3

188

35063.523

... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade

-

-

-

... More
Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface

434.67

144

62779.388100000004

... More
Repairs to Door / Windows

-

-

-

... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

-

-

-

... More
Of area 3 sq. metres and below

24

403

9694.08

... More
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :

-

-

-

... More
Of area 3 sq. metres and below

24

157

3788.3999999999996

... More
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:

-

-

-

... More
Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

3.24

1199

3887.0928000000004

... More
Renewal of old putty of glass panes (length)

25.2

61

1556.604

... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding

19.44

241

4685.2344

... More
Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete

-

-

-

... More
250 mm weighing not less than 150gms.

24

67

1611.84

... More
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :

-

-

-

... More
100X58X1.90 mm

72

117

8482.32

... More
Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm .

72

560

40320

... More
Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete.

-

-

-

... More
300 x 10mm

24

448

10752

... More
150 x 10mm

24

392

9408

... More
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. (a) 125 mm.

-

-

-

... More
125 mm

48

131

6293.76

... More
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

198

155

30862.260000000002

... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

36

2389

86015.16

... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.5 mm thick.

45

1150

51774.75

... More
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).

-

-

-

... More
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size

58.32

144

8407.4112

... More
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.

-

-

-

... More
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

122.73

214

26352.585600000002

... More
Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with

-

-

-

... More
4.0 mm thick glass panes

3.24

1171

3794.4287999999997

... More
Applying priming coat :

-

-

-

... More
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works

3.24

74

240.2136

... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

-

-

-

... More
Two or more coats on new work

3.24

171

555.6276

... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

-

-

-

... More
One or more coats on old work

3.24

113

366.3792

... More
Miscellaneous

-

-

-

... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

-

-

-

... More
Cement mortar 1:6 (1 cement : 6 coarse sand)

1.5

10016

15024.824999999999

... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 75 in superstructure above plinth level up to floor V level.

-

-

-

... More
Cement mortar 1:4 (1 cement :4 coarse sand

11.64

1236

14389.1352

... More
Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry.

11.64

115

1341.8592

... More
ELECTRICAL WORK

-

-

-

... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.

-

-

-

... More
Group B

111

1223

135777.42

... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

24

1536

36873.840000000004

... More
Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

75

352

26415

... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

-

-

-

... More
2X1.5 sq. mm + 1 X 1.5 sq. mm earth wire

135

245

33169.5

... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire

105

352

36981

... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire

75

462

34719.75

... More
Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable and 1.5 sq.mm. FR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required.

-

-

-

... More
Group B

30

671

20151.600000000002

... More
Rewiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.

12

942

11312.64

... More
Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

-

-

-

... More
2 x 1.5 sq. mm

48

73

3543.3599999999997

... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

-

-

-

75

152

11467.5

60

194

11641.8

... More
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.

-

-

-

... More
100 mm X 100 mm X 60 mm deep

6

220

1322.34

... More
150 mm X 75 mm X 60 mm deep

6

327

1967.6999999999998

... More
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

6

389

2334.66

... More
Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings).

6

377

2265.06

... More
Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required.

6

514

3087.6000000000004

... More
S/F light plug point Modular type accessories :-

-

-

-

... More
Supply and fixing of suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps. modular switch, connection etc. as required.

15

503

7545

... More
S/F power plug point modular type accessories :-

-

-

-

... More
Supply and fixing of suitable size GI box with modular plate and cover in FRLSont on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps. modular switch, connection etc. as required.

15

617

9269.1

... More
Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

6

91

550.4399999999999

... More
Supplying and fixing brass batten/ angle holder including connection etc. as required.

6

138

828.8399999999999

... More
Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.

3

104

313.20000000000005

... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

-

-

-

... More
6 way, Double door

-

-

-

... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

-

-

-

... More
4 way (4 + 12), Double door

3

4313

12941.880000000001

... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

-

-

-

... More
Single pole

45

269

12147.75

... More
Single pole and neutral

6

631

3789.8999999999996

... More
Triple pole

6

1061

6371.280000000001

... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

15

13

205.65

... More
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

3

283

850.98

... More
Earthing with G.I. earth pipe 4.5 Mtr long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

6

7228

43371.600000000006

... More
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

30

302

9079.199999999999

... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

30

257

7719

... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

30

73

2214.6

... More
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

24

217

5213.5199999999995

... More
Supply of 15W SURFACE MOUNTED ROUND LED with all accessories as per standard item..

6

1345

8070

... More
Supply of 20W SURFACE MOUNTED ROUND LED with all accessories as per standard item..(Such as Panasonic ADL04R206 or Equivalent).

6

953

5718

... More
Supply of 15W WALL BRACKET LED BULB with all accessories as per standard item..(Such as Panasonic PBUM01157 or Equivalent).

6

378

2268

... More
Supply of 20W SURFACE MOUNTED LED TUBE with all accessories as per standard item..(Such as Panasonic PBTM01207 or Equivalent).

6

897

5382

... More
Type-I Staff Qtrs. (12 nos. i.e. 3 block of 4 units each ) G

-

-

-

... More
Structural Repair & Retrofitting

-

-

-

... More
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge

-

-

-

... More
25 mm average thickness

15.3

139

2133.279

... More
50 mm average thickness

2.94

281

829.0506

... More
Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.

-

-

-

... More
Bars upto 12 mm diameter

291.84

9

2649.9071999999996

... More
Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge.

50.85

420

21389.544

... More
Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineerin- Charge

-

-

-

... More
Note: Rates shall include the providing necessary ground wires etc. The levelling gauges, if used, shall be paid for separately. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/ tapping with a blunt metal instrument.

-

-

-

... More
25mm thick in Grade M 25 with cement content not less than 330 kg per cum

15.3

821

12570.327000000001

... More
50mm thick in Grade M 25 with cement content not less than 330 kg per cum

2.94

1266

3722.5104

... More
Re-Baring of MS bar 10 mm dia with Fisher Chemical including drilling of hole, cleaning, and fixing of bar complete as per direction of Engineer-in-Charge.

42

550

23100

... More
Repairs to Roof

-

-

-

... More
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the samemembrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick

389.37

591

230195.54400000002

... More
Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation.

389.37

97

38076.492300000005

... More
Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

24.15

8846

213643.69950000002

... More
Repair to Toilets

-

-

-

... More
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

-

-

-

... More
For thickness of tiles 10 mm to 25 mm

232.53

80

18774.4722

... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

43.41

1206

52361.5761

... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

189.12

1394

263775.12

... More
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :

-

-

-

... More
75 to 80 mm dia pipe

105

83

8743.35

... More
Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :

-

-

-

... More
15 mm to 40 mm nominal bore

135

164

22245.3

... More
Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge:

-

-

-

... More
Up to 150 mm diameter

135

365

49361.4

... More
Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge.

12

767

9205.68

... More
Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap.

6

1054

6327.780000000001

... More
Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

6

147

885.06

... More
Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres

-

-

-

... More
Up to 150 mm diameter

12

351

4217.4

... More
Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including stacking of useful materials near the site and disposal of unserviceable materials within 50 m lead as per direction of Engineer- charge :

-

-

-

... More
Rectangular manhole 90x80 cm and 45 cm deep

12

2794

33539.28

... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

-

-

-

... More
110 mm diameter

135

415

56043.9

... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

-

-

-

... More
a) Coupler

-

-

-

... More
110 mm

24

149

3594.4800000000005

... More
b) Bend 87.5°

-

-

-

... More
110 mm bend

48

165

7938.719999999999

... More
Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work :

-

-

-

... More
75 mm diameter pipes

15

31

465.3

... More
100 mm diameter pipes

30

39

1196.4

... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

-

-

-

... More
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

6

7444

44664.840000000004

... More
Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standard pattern including cutting & making good the walls wherever required.

-

-

-

... More
a) Flat back wash Basin size 550x400 mm with single 15mm C.P. brass pillar tap.

6

2067

12402.72

... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :

-

-

-

... More
Kitchen sink without drain board

-

-

-

... More
610x510 mm bowl depth 200 mm

-

-

-

... More
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.

-

-

-

... More
a) 32mm dia (for wash basin)

6

131

789.06

... More
b) 40mm dia (for sink and urinal)

-

-

-

... More
Providing & fixing CP brass Overhead shower with shower arm, Hand Shower 95mm dia Single Lever Concealed Deusch Mixer with Provision for Connection to Overhead Shower and Easy flex Tube with accessories complete I all respect

6

5108

30648

... More
Providing and fixing of C. P. brass towel rail 600 x 20 mm size complete with C.P. brass brackets

6

2869

17214

... More
Providing and fixing of C. P. brass towel ring complete with C.P. brass brackets

6

1095

6570

... More
Providing and fixing CP Brass soap dish 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket and all fittings of the same material of approved quality and colour.

-

-

-

... More
Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms

6

134

807.8399999999999

... More
Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382.

-

-

-

... More
The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-charge at site.

-

-

-

... More
110 mm dia (Wall Thickness - 3.2 to 3.8 mm)

90

750

67500

... More
75 mm dia (Wall Thickness - 3.2 to 3.8 mm)

45

550

24750

... More
Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating complete in all respects.

-

-

-

... More
Multi Floor Trap (5" Ht) with height raiser and branch saddle strip of 50/75 mm outlet

12

673

8076

... More
Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser

48

831

39888

... More
P-Trap type Floor Trap 110 x 75 mm

12

565

6780

... More
Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps.

72

597

42984

... More
Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round cover with screws and other required fitting complete as required.

12

389

4668

... More
Providing and fixing 100 mm sand cast Iron grating for gully trap.

6

58

351.48

... More
Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers.

12

1768

21225

... More
Providing & fixing soil, waste and vent pipes.

-

-

-

... More
a) 100mm dia centrifugally cast iron S & S pipe.

30

1298

38964.899999999994

... More
b) 75mm dia centrifugally cast iron S & S pipe.

15

1304

19569

... More
Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size). Including cost of cutting holes & making good the walls etc.

-

-

-

... More
a) for 100mm dia pipe.

6

399

2394.84

... More
b) for 75mm dia pipe.

6

396

2376

... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.

-

-

-

... More
a) 100mm

-

-

-

... More
Sand cast iron S&S as per IS - 3989

6

775

4654.32

... More
b) 75mm

-

-

-

... More
Sand cast iron S&S as per IS- 3989

6

575

3450.4800000000005

... More
Providing and fixing plain cast iron S & S sanitary bend.

-

-

-

... More
a) 100mm

-

-

-

... More
Sand cast iron S&S as per IS - 1729

6

517

3105

... More
b) 75mm

-

-

-

... More
Sand cast iron S&S as per IS - 3989

6

429

2577.3

... More
Providing and fixing centrifugaly cast iron single equal plain junction of required degree.

-

-

-

... More
a) 100x100x100mm

6

799

4795.26

... More
b) 75x75x75mm

6

692

4154.700000000001

... More
Providing and fixing cast iron terminal guard.

-

-

-

... More
a) 100mm

6

556

3339.6000000000004

... More
b) 75mm

6

445

2671.38

... More
Providing & fixing cast iron coller.

-

-

-

... More
a) 100 mm

-

-

-

... More
Sand cast iron S&S as per IS - 3989

6

564

3386.82

... More
b) 75mm dia.

-

-

-

... More
Sand cast iron S&S as per IS - 3989

6

398

2389.56

... More
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters.

-

-

-

... More
a) 100mm

6

684

4108.5

... More
b) 75mm

6

578

3473.2799999999997

... More
Providing & fixing cast iron trap of self cleansing design with or without ventarm complete, including cost of cutting & making good the walls & floors.

-

-

-

... More
a) 100mm inlet & 75mm outlet.

6

2172

13036.02

... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

-

-

-

... More
15 mm nominal outer dia Pipes

75

547

41068.5

... More
20 mm nominal outer dia Pipes

60

591

35481.6

... More
25 mm nominal outer dia Pipes

45

689

31049.100000000002

... More
32 mm nominal outer dia Pipes

30

813

24396.9

... More
Providing and fixing brass stop cock of approved quality.

-

-

-

... More
15 mm nominal bore

12

388

4662.96

... More
Providing and fixing gun metal gate valve with wheel of approved quality.

-

-

-

... More
a) 25mm dia nominal bore

6

684

4107.84

... More
b) 32mm dia nominal bore

6

758

4551.36

... More
Providing and fixing ball valve (brass) of approved quality complete. (High or low pressure with plastic floats).

-

-

-

... More
a) 25mm. Nominal bore

6

510

3062.7599999999998

... More
Providing and fixing 30 cm long unplasticised PVC connection pipe with brass unions.

-

-

-

... More
a) 15mm nominal bore

6

93

561

... More
Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions.

-

-

-

... More
a) 15mm nominal bore

6

107

645.1800000000001

... More
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation 3concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :

-

-

-

... More
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

6

2191

13151.16

... More
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :

-

-

-

... More
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

6

11948

71691.84

... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

1500

12

18150

... More
Providing & fixing CP brass bib cock of approved quality conforming to IS 8931

-

-

-

... More
a) 15mm nominal bore

12

557

6689.76

... More
Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.

-

-

-

... More
a) 15mm nominal bore

6

878

5273.1

... More
Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931

-

-

-

... More
a) 15mm nominal bore

6

631

3790.38

... More
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

12

82

987.36

... More
Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.

-

-

-

... More
25mm nominal bore, weighing not less than 62 gms

3

124

374.07

... More
Cutting holes up to 30x30 cm in walls including making good the same:

-

-

-

... More
With common burnt clay F.P.S. (non modular) bricks

18

458

8252.64

... More
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

12

497

5966.4

... More
Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.

75

223

16739.25

... More
Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately) :

-

-

-

... More
Rectangular manhole 90x80 cm with rectangular cover 600 x 450 mm of grade LD - 2.5

6

2888

17328.300000000003

... More
Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)

6000

-

3300.0000000000005

... More
Repair to Plaster and Plinth Protection

-

-

-

... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

-

-

-

... More
Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

4.26

1653

7045.8696

... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

106.2

824

87533.22600000001

... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

82.53

60

4961.7036

... More
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge.

-

-

-

... More
With cement mortar 1:4 (1cement: 4 coarse sand)

160.77

616

99122.7435

... More
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

326.55

27

9035.638500000001

... More
15mm cement plaster on rough side of single or half brick wall of mix

-

-

-

... More
1:6 (1 cement : 6 course sand)

66.24

434

28807.113599999997

... More
6mm cement plaster to ceiling of mix :

-

-

-

... More
1:3 ( 1 cement : 3 fine sand)

16.29

330

5383.844999999999

... More
Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand):

-

-

-

... More
Raised and cut pointing

7.02

461

3242.4678

... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour

-

-

-

... More
New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre

82.53

204

16854.2766

... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour

-

-

-

... More
Old work (one or more coats)

192.57

68

13281.552899999999

... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

82.53

171

14167.0998

... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:

-

-

-

... More
New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

160.77

188

30258.521700000005

... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade

-

-

-

... More
Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface

133.98

144

19350.7314

... More
Repairs to Door / Windows

-

-

-

... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

-

-

-

... More
Of area 3 sq. metres and below

24

403

9694.08

... More
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :

-

-

-

... More
Of area 3 sq. metres and below

60

157

9471

... More
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:

-

-

-

... More
Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

20.52

1199

24618.2544

... More
Renewal of old putty of glass panes (length)

180

61

11118.6

... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

-

-

-

... More
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

25.2

2631

66324.384

... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

25.2

508

12816.467999999999

... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

36

2389

86015.16

... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.5 mm thick.

45

1150

51774.75

... More
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

390.6

155

60882.82200000001

... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to steel windows by welding

246.24

241

59346.3024

... More
Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc, complete.

-

-

-

... More
300 mm weighing not less than 200gms.

48

74

3558.7200000000003

... More
250 mm weighing not less than 150gms.

24

67

1611.84

... More
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :

-

-

-

... More
100X58X1.90 mm

108

117

12723.48

... More
Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm .

36

560

20160

... More
Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete.

-

-

-

... More
300 x 10mm

72

448

32256

... More
150 x 10mm

72

392

28224

... More
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. (a) 125 mm.

-

-

-

... More
125 mm

72

131

9440.64

... More
Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.

-

-

-

... More
Twin rubber stopper

48

79

3820.32

... More
Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws.

-

-

-

... More
30 mm thick shutters with ISI marked M.S. butt hinges with necessary screws

-

-

-

... More
With ISI marked stainless steel butt hinges of required size

-

-

-

... More
Kiln seasoned and chemically treated hollock wood

25.2

3981

100335.31199999999

... More
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).

-

-

-

... More
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size

738.72

144

106493.8752

... More
Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with

-

-

-

... More
4.0 mm thick glass panes

41.04

1171

48062.7648

... More
Applying priming coat :

-

-

-

... More
With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood.

151.2

82

12416.544

... More
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works

73.65

74

5460.411

... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

-

-

-

... More
over an under coat of suitable shade with ordinary paint of approved brand and manufacture

224.85

171

38559.5265

... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

-

-

-

... More
One or more coats on old work

17.28

113

1954.0224

... More
Miscellaneous

-

-

-

... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :

-

-

-

... More
1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

0.48

11938

5730.36

... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :

-

-

-

... More
Edges of slabs and breaks in floors and walls

-

-

-

... More
Under 20 cm wide

8.1

229

1858.221

... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :

-

-

-

... More
Suspended floors, roofs, landings, balconies and access platform.

4.86

1019

4957.102800000001

... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

-

-

-

... More
Thermo-Mechanically Treated bars of grade Fe-500D or more.

11.85

118

1405.884

... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

-

-

-

... More
Cement mortar 1:6 (1 cement : 6 coarse sand)

0.81

10016

8113.4055

... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 75 in superstructure above plinth level up to floor V level.

-

-

-

... More
Cement mortar 1:4 (1 cement :4 coarse sand

9.54

1236

11793.1572

... More
Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry.

9.54

115

1099.7712

... More
ELECTRICAL WORK

-

-

-

... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.

-

-

-

... More
Group B

69

1223

84402.18000000001

... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

24

1536

36873.840000000004

... More
Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

45

352

15849

... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

-

-

-

... More
2X1.5 sq. mm + 1 X 1.5 sq. mm earth wire

120

245

29484

... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire

105

352

36981

... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire

75

462

34719.75

... More
Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable and 1.5 sq.mm. FR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required.

-

-

-

... More
Group B

30

671

20151.600000000002

... More
Rewiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.

12

942

11312.64

... More
Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

-

-

-

... More
2 x 1.5 sq. mm

48

73

3543.3599999999997

... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

-

-

-

75

152

11467.5

60

194

11641.8

... More
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.

-

-

-

... More
100 mm X 100 mm X 60 mm deep

6

220

1322.34

... More
150 mm X 75 mm X 60 mm deep

6

327

1967.6999999999998

... More
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

6

389

2334.66

... More
Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings).

6

377

2265.06

... More
Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required.

6

514

3087.6000000000004

... More
S/F light plug point Modular type accessories :-

-

-

-

... More
Supply and fixing of suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps. modular switch, connection etc. as required.

15

503

7545

... More
S/F power plug point modular type accessories :-

-

-

-

... More
Supply and fixing of suitable size GI box with modular plate and cover in FRLSont on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps. modular switch, connection etc. as required.

15

617

9269.1

... More
Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

6

91

550.4399999999999

... More
Supplying and fixing brass batten/ angle holder including connection etc. as required.

6

138

828.8399999999999

... More
Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.

3

104

313.20000000000005

... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

-

-

-

... More
6 way, Double door

-

-

-

... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

-

-

-

... More
4 way (4 + 12), Double door

3

4313

12941.880000000001

... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

-

-

-

... More
Single pole

45

269

12147.75

... More
Single pole and neutral

6

631

3789.8999999999996

... More
Triple pole

6

1061

6371.280000000001

... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

15

13

205.65

... More
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

3

283

850.98

... More
Earthing with G.I. earth pipe 4.5 Mtr long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

6

7228

43371.600000000006

... More
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

30

302

9079.199999999999

... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

30

257

7719

... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

30

73

2214.6

... More
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

36

217

7820.28

... More
Supply of 15W SURFACE MOUNTED ROUND LED with all accessories as per standard item..

9

1345

12105

... More
Supply of 20W SURFACE MOUNTED ROUND LED with all accessories as per standard item..(Such as Panasonic ADL04R206 or Equivalent).

9

953

8577

... More
Supply of 15W WALL BRACKET LED BULB with all accessories as per standard item..(Such as Panasonic PBUM01157 or Equivalent).

9

378

3402

... More
Supply of 20W SURFACE MOUNTED LED TUBE with all accessories as per standard item..(Such as Panasonic PBTM01207 or Equivalent).

9

897

8073

... More
WATER SUPPLY

-

-

-

... More
DISTRIBUTION NETWORK FOR FRESH WATER SUPPLY

-

-

-

... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.

-

-

-

... More
External work

-

-

-

... More
20 mm dia nominal bore

-

-

-

... More
25 mm dia nominal bore

472

514

242858.15999999997

... More
32 mm dia nominal bore

390

594

231788.7

... More
40 mm dia nominal bore

635

678

431012.6

... More
50 mm dia nominal bore

375.55

838

314849.8535

... More
65 mm dia nominal bore

582.23

986

574230.1598

... More
80 mm dia nominal bore

-

-

-

... More
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :

-

-

-

... More
20 mm diameter pipe

-

-

-

... More
25 mm diameter pipe

472

20

9529.68

... More
32 mm diameter pipe

390

24

9523.800000000001

... More
40 mm diameter pipe

635

27

17640.3

... More
50 mm diameter pipe

375.55

33

12599.7025

... More
65 mm diameter pipe

582.23

41

24244.0572

... More
80 mm diameter pipe

-

-

-

... More
Providing and filling sand of grading zone V or coarser grade alround the GI pipes in external work.

-

-

-

... More
20mm dia nominal bore

-

-

-

... More
25mm dia nominal bore

457.6

176

80889.952

... More
32mm dia nominal bore

387.32

181

70255.9748

... More
40mm dia nominal bore

632.72

183

116230.664

... More
50 mm diameter pipe

375.55

190

71572.319

... More
65 mm diameter pipe

582.23

300

175134.784

... More
80 mm diameter pipe

-

-

-

... More
Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) :

-

-

-

... More
50 mm dia

5

6323

31618.4

... More
80 mm dia

-

-

-

... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

-

-

-

... More
20 mm nominal bore

28

593

16630.600000000002

... More
25 mm nominal bore

35

684

23962.399999999998

... More
32 mm nominal bore

29

758

21998.239999999998

... More
40 mm nominal bore

16

908

14539.36

... More
50 mm nominal bore

18

1129

20327.76

... More
65 mm nominal bore

2

1916

3832.74

... More
80 mm nominal bore

-

-

-

... More
1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

10

8666

86663.5

... More
Providing and fixing G.I. Union in GI pipe including cutting and threading the pipe and making long screws etc. complete(New work)

-

-

-

... More
25 mm nominal bore

35

483

16911.3

... More
32 mm nominal bore

29

537

15600.84

... More
40 mm nominal bore

16

694

11110.88

... More
50 mm nominal bore

18

906

16311.24

... More
65 mm nominal bore

-

-

-

... More
80 mm nominal bore

-

-

-

... More
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality

-

-

-

... More
LD- 2.5

-

-

-

... More
Rectangular shape 600*450 mm internal dimensions

20

1581

31628.4

... More
Constructing masonry gate valve Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :

-

-

-

... More
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

16

2191

35069.76

... More
Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :

-

-

-

... More
with common burnt clay F.P.S.(non module) brick of class designation 7.5

6

11948

71691.84

... More
BOREWELL 380 MTR DEPTH

-

-

-

... More
Sub Head : I Tubewells

-

-

-

... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different trata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level.

-

-

-

... More
All Type of Soil

-

-

-

... More
400mm dia

90

1089

98089.20000000001

... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level.

-

-

-

... More
All Type of Soil

-

-

-

... More
400mm dia

290

1362

395081.5

... More
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge.

-

-

-

... More
200 mm nominal size dia having minimum wall thickness 5.40 mm

350

2687

940460.5000000001

... More
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge.

-

-

-

... More
200 mm nominal size dia

30

2828

84844.79999999999

... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in- charge.

60

2226

133617

... More
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.

150

1193

179034

... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:

-

-

-

... More
200 mm dia

1

353

353.27

... More
Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.

-

-

-

... More
200 mm clamp

2

2523

5046.04

... More
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).

-

-

-

... More
200 mm nominal size dia

1

393

393.36

... More
Supply, installation testing & commissioning of borewell submersible pumping set suitable to operate on 415 volts 3 phase 50 HZ A.C. power supply including water proof joint free cable, motor control panel, 200 mm outer dia uPVC Pipe as per IS : 12818 with fittings, clamps etc. complete in all respect as per details given below :

-

-

-

... More
Pump Motor shall be Class F Insulation , Pump and Motor shall be IP : 68 Protection Rating , and Motor Efficiency shall be Class IE-3 Efficiency .

-

-

-

... More
Pump to be lowered below ground as site Boring/drilling

-

-

-

... More
Pump capacity : 15000 litres/hr

-

-

-

... More
Head : 250M

-

-

-

... More
H.P : 15 ( Approx)

-

-

-

... More
Total of one set Tubewell

1

179403

179403

... More
Provding and fixing heavy duty 65mm G.I. pipe confiming to IS. 1239 upto 150 mm and IS 3589 for dia 200 mm and above with reducers, tees, flanges, elbow, crosses, union etc. and fixing the pipes on wall / ceiling / beam / floor including Clamping/Supporting the same, including painting with 2 coats of synthetic enamel paint as per the site requirement and shall be duly painted with two coats of approved quality synthetic enamel paint & shade over a readymix primer coat complete as required & as per directions of the engineer-in-charge for the following sizes:

380

1150

437000

... More
PANEL(Outdoor Type weather proof, double door with canopy and suitable MS Structure stand duly painted)

-

-

-

... More
INCOMER

-

-

-

... More
1 No.100 Amp FP MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.

-

-

-

... More
Metering & Indication

-

-

-

... More
1 set of RYB phase indicating lamps

-

-

-

... More
MFM with Communication Facility along with control SP MCB

-

-

-

... More
Surge protection device , Type 2, MOV type for 8/20 us wave, 3 Nos phase to neutral, one No neutral to earth ,(minimum 3+1 mode) with minimum discharge capacity 40KA along with necessary fuses.

-

-

-

... More
BUS-BAR

-

-

-

... More
1 Set of 125A TPN Aluminium Bus Bar with colour coded PVC Sleeves

-

-

-

... More
OUTGOINGS

-

-

-

... More
3 Nos. 40A TPN MCB

-

-

-

... More
3 Nos. 25A DP MCB

-

-

-

... More
3 Nos. 20A DP MCB

-

-

-

... More
Plumbing Panel

-

-

-

... More
NOTE :- All starters shall have ON & OFF push button & suitable rating of contractor and overload relays

-

-

-

... More
Supplying,Receiving, fixing, testing & commissioning of above described Panel

1

230050

230050

... More
COST OF BORELOGING WORK (Bore logging is the process of recording detailed geological information from boreholes drilled during subsurface investigations. The primary aim is to understand the geological formations, stratigraphy, and hydrological conditions.)

1

200000

200000

... More
COST OF WATER QUALITY TEST ( Water quality testing involves analyzing water samples to determine their physical, chemical, and biological characteristics. )

1

50000

50000



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.