State Building Construction Corporation Limited Tender
Search from across the categories, cities, and authorities to find the latest Jharkhand tenders. Every Jharkhand tender is curated from credible sources of government websites (eProcurement Jharkhand portal) and newspapers, thus ensuring the credibility of the information presented to you. For more information on Jharkhand tender bidder registration, the login process and more read the FAQs section on this page.
Costs
EMD
₹ 14,05,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_JSBCC_96014_1Bid Award Id
ViewTender No
JSBCCL/83/2024-25Tender Authority
State Building Construction Corporation Limited ViewPurchaser Address
-Website
http://jharkhandtenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Providing coarse clean sand in filling in foundation trenches or plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts includng cost of all materials, Labour, rotalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume).
335.53
-
-
... More
Providing designation 75A work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.m. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials ranking out joints to 15mm depth, curing taxes and royalty all complete as per building specification and direction of E/I.
30.43
-
-
... More
Providing designation 75B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening maerials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.
200.13
-
-
... More
Providing designation 75 A brick work in C.M. (1: 6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.
897.57
-
-
... More
Providing designation 75Bbrick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints costs of screening materials, scaffolding, raking out joints to 15mm depth curing taxes and royalty all complete as per building specification and direction of E/I.
21.06
-
-
... More
Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering texes royalty all complete as per building specification and direction of E/I.
2709.9
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
39.33
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size)
3.81
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size)
29.1
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete
1037.74
-
-
... More
Providing P.C.C. M-10 with nominal mix of (1:3:6) in foundation with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of 2.5 to 3.0 including screening, shuttering and its removal, mixing cement concrete in mixer.
137.55
-
-
... More
Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete.
1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
3.73
-
-
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level.
1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)
727.6
-
-
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1½:3 (1 cement : 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm
nominal size).
45.57
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete
246.6
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
285.12
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Shelves (Cast in situ)
7.89
-
-
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers
2328.25
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for
Weather shade, Chajjas, corbels etc., including edges
260.22
-
-
... More
Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size).
202.42
-
-
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)
331.13
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts
1503.17
-
-
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
1266.36
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Stairs, (excluding landings) except spiral-staircases
918.03
-
-
... More
Providing designation 125mm thick reinforced designation 75A brick work in (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening carriage of materials, scaffolding, raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement0 all complete as per building specification and direction of E/I.
9.34
-
-
... More
Providing designation 112mm thick reinforcement designtion 100 A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9"x4.5"x3") in C.M. (1:4) in supertructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including cost of screening materials scaffoliding raking out joints to 15mm depth curing taxesand royalty ( but excluding theb cost of reinforcement) all complete as per building specification and direction of E/I.
306
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)
184.37
-
-
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
228.48
-
-
... More
Suspended floors, roofs, landings, balconies and access platform
2698.88
-
-
... More
Providing Toe steel reinforcement of 8mm dia to 32mm dia rods as approved design and drawing excluding carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (Only Valid for SAIL & TATA STeel)
-
-
-
... More
8 mm dia (TMT coil Fe 500) (Only Valid for SAIL & TATA Steel) 20%
67.94
-
-
... More
10mm mm dia (TMT coil Fe 500) (Only Valid for SAIL & TATA Steel)15%
63.91
-
-
... More
12 mm dia (TMT coil Fe 500) (Only Valid for SAIL & TATA Steel) 65%
211.78
-
-
... More
S/F M.S. grill made of 20 x 6mm M.S. flat as per approved design and drawing, properly fabricated with joints continous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction ofE/I. (Where materials is not supplied by the deptt.)
122.68
-
-
... More
Providing and fixing fan hooks of 16mm dia M.S. bar & 1 meter long, bent torequired size and shape, placed in position and fixed in the R.C.C.slab/beam at the time ofcasting all complete as per building specification and direction of E/I.
2
-
-
... More
S/F local make fully glazed steel door, windows or ventilation of standard rolled 'Z' and mullion steel section and size as per IS - 38 joints met welded with 100 x 16 x 3mm M.S. lug fixed in cement concrete (1:2:4) blocks, 15 x 10 x 10cm size including cost of oxidized iron fitting with hinges, handle per step catch springs, 3mm thick plain glass panes with aluminum beads and inner frame fixed with lugs with 20mm long 6.3mm GI. counter sunk machine screw and nuts and applying a coat red lead paint carriage to work site hoisting and plcing in all position in all storys and taxes all complete as per building specification and direction of E/I.
5.58
-
-
... More
Supplying, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows skylights, fanlights and C/W celetial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all completeas per building specification and direction of E/I.
1.34
-
-
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite)solid Door / window / Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threadedstar headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge),minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall
be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in
dimensions i.e depth and width of profile shall be acceptable. Variation
in profile dimensions on plus side shall be acceptable but no extra
payment on this account shall be made.
267.3
-
-
... More
S/F 35mm thick solid core type decorative single leaf flush door and windows with black board core banded with high quality phenol formaldehydes synthetic resin both side commercial veneered of standard make with oxidized iron fittings such as hinges, sliding door bolts tower bolts, handles or rings hooks and eyes, cleats sand block as per schedule taxes and royalty all complete as per building and direction of E/I.(one side teak)
4.13
-
-
... More
S/F 35mm thick solid core type non-decorative single leaf flush door and windows with black board core banded with high quality phenol formaldehydes synthetic resin both side commercial veneered of standard make with oxidized iron fittings such as hinges, sliding door bolts tower bolts, handles or rings hooks and eyes, cleats sand block as per schedule taxes and royalty all complete as per building and direction of E/I.
63.86
-
-
... More
Supplying, fitting and fixing 35mm thick solid core type non-decorative double leaf flush shutter in door and windows with black board core blended with high quality phenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I.
21.42
-
-
... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.
85.28
-
-
... More
15 mm cement plaster on the rough side of single or half brick wall of
mix :
1:6 (1 cement: 6 fine sand)
151.87
-
-
... More
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres
3000
-
-
... More
Supplying and stacking at site
63 mm to 45 mm size stone aggregate
300
-
-
... More
Supplying and stacking at site
Moorum
75
-
-
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately)
85.05
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
55.59
-
-
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron)
23.6
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
39.93
-
-
... More
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
10
-
-
... More
Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/ Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete complying to ASTM C920, DIN 18540-F & ISO 11600. Upto 10 mm depth and 10 mm width
65.4
-
-
... More
Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2mm at 100mm centers and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40 x 40 x 6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of red lead paint, car riage, hoisting and taxes all complete as per building specification and direction of E/I.
22.19
-
-
... More
S/F M.S. grill made of 20 x 6mm M.S. flat as per approved design and drawing, properly fabricated with joints continous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction ofE/I. (Where materials is not supplied by the deptt.)
1904.31
-
-
... More
Providing two coat of oil bound distemper of approved shade and make over a primer coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding, washing floors and taxes all complete as per building specification and direction of E/I.
127.98
-
-
... More
Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly cost of scaffolding and taxes all complete as per building specification and direction of E/I.
191.97
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
Powder coated aluminium (minimum thickness of powder coating 50 micron)
157.59
-
-
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) - Powder coated aluminium (minimum thickness of powdercoating 50 micron)
162.2
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
With float glass panes of 4.0 mm thickness
95.22
-
-
... More
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.
Upto 5mm depth and 5 mm width
185.4
-
-
... More
Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I.
1024.57
-
-
... More
Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I.
16986.37
-
-
... More
Providing 12mm cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
2697.21
-
-
... More
Providing 6mm thick cement plaster (1:4) in ceiling with clean of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
9.5
-
-
... More
Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I.
599.57
-
-
... More
Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastrered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I.
47.97
-
-
... More
Providing two coats of synthetic enamel paint of approved shade and make over new wooden surface including cleaning the surface after removing dirt including scales, smokes, grease and sand preparing, including cost of scaffolding and taxes all complete as per building specification and direction of E/I.
10.93
-
-
... More
Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly cost of scaffolding and taxes all complete as per building specification and direction of E/I.
5.58
-
-
... More
Labour for laying, fitting and fixing NP2 R.C.C. spu pipe with colars in lines, level and grade and providing approved jointing materials and joints properly filled to make them leak, proof including providing sight rails, bonning rod, night guard, Red light and barrier etc. all complete as per specification and direction of E/I.
150mm dia RCC spun pipe - Upto 3.0 metre depth of invert below G.L.
240
-
-
... More
Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete.
Granite of any colour and shade
132.25
-
-
... More
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. ressed butt hinges 2.5 mm thick with mortar guards, lock strike- plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineerin-charge:.
10.67
-
-
... More
Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
6461.78
-
-
... More
Providing and fixing Glass mossaic tiles on finished plain wall surface ofsize 20 mm x 20 mm x 4 mm in all colour, design , fixing in approveddesign. The glass mosaic tiles shall be fixed on the wall surface withthe help of approved adhesive applied at the rate of 2.5 kg per sqm andgrouting of the same. All completed as per direction of Engineer-in-charge.
596.33
-
-
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
19696.12
-
-
... More
New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)
2700.25
-
-
... More
Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I.
16947.9
-
-
... More
Providing 150mm wide brick draing in cement mortar (1:6) with av. 150mm and 125mm apron including stacking serviceable material within 15M lead and disposal of unserviceable material with all leads all complete as per direction of E/I.-
230.18
-
-
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
156
-
-
... More
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including:
a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.
b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.
c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot DipGalvanised with serrations and serrated washers to arrest the wind loadmovement, fasteners, SS 316 Pins and anchor bolts of approved make inSS 316, Nylon separators to prevent bi-metallic contacts all completerequired to perform as per specification and drawing The item includescost of all material & labour component, the cost of all mock ups at site,cost of all samples of the individual components for testing in an approvedlaboratory, field tests on the assembled working curtain wall with aluminiumcomposite panel cladding, cleaning and protection of the curtain wall withaluminium composite panel cladding till the handing over of the building foroccupation. Base frame work for ACP cladding is payable under the relevantaluminium item.s The Contractor shall provide curtain wall with aluminiumcomposite panel cladding, having all the performance characteristics allcomplete , as per the Architectural drawings, as per item description, asspecified, as per the approved shop drawings and as directed by theEngineer-in-Charge. However, for the purpose of payment, only the actualarea on the external face of the curtain wall with Aluminum CompositePanel Cladding (including width of groove) shall be measuredin sqm. up to two decimal places.
142.04
-
-
... More
Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :
60.35
-
-
... More
Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I.With commercial grade colour 15X15cm Tiles.
1139.88
-
-
... More
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.
552.44
-
-
... More
Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm .
1466.25
-
-
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with sea; ring conforming to IS:5382, leaving 10mm gap for thermal expansion, Single socketed pipes
131.4
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
... More
Coupler - 110mm
25
-
-
... More
Bend - 110mm
25
-
-
... More
Shoe - 110
25
-
-
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete
110 mm
75
-
-
... More
Providing and fixing in position wall panelling at all heights with integral densified calcium silicate panels/tiles of size 595 x 595mm,having NRC (Noise Reduction coefficient) of 0.50 (minimum) as perIS 8225:1987, Light reflectance of 85% (minimum). Non combustibleas per BS:476 (part-4), fire performance as per BS:476 (part 6 &7),humidity resistance of 100%, thermal conductivity 0.043 W/m Kas per ASTM 518:1991, comprising of a frame made from especiallyfabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) i.e.verticalstuds of size 48 x 34 x 36 mm are placed at 600mm center tocenter in a floor and ceiling channel section of size 50 x 32m fixedto the floor and soffit at 600mm centers using 12mm dia,50mm longwedge type expanded zinc alloy dash fastner with 10mm bolt. Thissame channel is then to be fixed in horiziontal direction at 600mmcenter to center so as to form a grid of 600mm x 600mm. Glasswoolof 50mm thickness is then to be inserted in the slots and finallycalcium silicate non combustible panels/tiles are to be screw fixedwith self tapping pan head nickel coated mild steel screws of size13 x 3.2mm on to this grid leaving an even groove of 1 mm betweenthe panels. The joints between the panels are to be duly jointed andfinished using recommended jointing calcium silicate basedcompound and fiber joint tape roll 50mm wide (90 metre )roll andtwo coats of primer suitable for panelling as per manufacturer's specification as per direction of Engineer-in-Charge all complete.
-
-
-
... More
With 15 mm thick fully perforated square/butt edge lightweight calcium silicate panels/ tiles
167.31
-
-
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,
-
-
-
... More
shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :
-
-
-
... More
12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks)
1621.5
-
-
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
45213.88
-
-
... More
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
2298.8
-
-
... More
Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :
-
-
-
... More
Ridges plain (500 - 600mm)
55
-
-
... More
Gutter (600 mm over all girth)
110
-
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge
100 mm nominal size dia
60
-
-
... More
Supplying, filling, spreading & leveling stone boulders of size range5 cm to 20 cm, in recharge pit, in the required thickness, for allleads & lifts, all complete as per direction of Engineer-in-charge
6.68
-
-
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to10 mm, in the recharge pit, over the existing layer of boulders, inrequired thickness, for all leads & lifts, all complete as per directionof Engineer-in-charge
6.68
-
-
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mmto 2 mm in recharge pit, in required thickness over gravel layer, for all leads& lifts, all complete as per direction of Engineer -in-charge
6.68
-
-
... More
DT : Basic rates for 125/115mm dia drilled Tube-well for drilling in all kinds of soil and rock for installation of hand pump with DTH rig Machine all complete including supplying all materials, labours, tools, drilling, rigs, air compressor and equipments as well as fuel lubricant, for making 125/115 mm dia boring etc. and cost of transporting rig machine and other vehicle up to site of work as per specification and direction of E/I.. (Basic Rates)
Drilling upto 30 mtr. Depth below G.L. in Rural Area
60
-
-
... More
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:
(a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including: (b) Fabricating and supplying serrated M.S. hot dip galvanised /Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers
-
-
-
... More
(c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass. (d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight. (e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified.
-
-
-
... More
The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge. Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this sub- head. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. up to two decimal places.
-
-
-
... More
Note:-2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately. The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NABL accredited lab or any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 1. Performance Laboratory Test for Air Leakage Test (-50pa to - 300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr 2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testing method for a range up to 2000 ml. 3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method for a range upto 2000 ml
-
-
-
... More
4. Structural Performance Deflection and deformation by static air pressure test (1.5 times design wind pressure without any failure) as per ASTME-330-10 testing method for a range upto 50 mm 5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for Qualitative test, Tests to be conducted on site. 6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml
105
-
-
... More
Providing and fixing in position wall panelling at all heights with integral densified calcium silicate panels/tiles of size 595 x 595mm,having NRC (Noise Reduction coefficient) of 0.50 (minimum) as perIS 8225:1987, Light reflectance of 85% (minimum). Non combustibleas per BS:476 (part-4), fire performance as per BS:476 (part 6 &7),humidity resistance of 100%, thermal conductivity 0.043 W/m Kas per ASTM 518:1991, comprising of a frame made from especiallyfabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) i.e.verticalstuds of size 48 x 34 x 36 mm are placed at 600mm center tocenter in a floor and ceiling channel section of size 50 x 32m fixedto the floor and soffit at 600mm centers using 12mm dia,50mm longwedge type expanded zinc alloy dash fastner with 10mm bolt. Thissame channel is then to be fixed in horiziontal direction at 600mmcenter to center so as to form a grid of 600mm x 600mm. Glasswoolof 50mm thickness is then to be inserted in the slots and finallycalcium silicate non combustible panels/tiles are to be screw fixedwith self tapping pan head nickel coated mild steel screws of size13 x 3.2mm on to this grid leaving an even groove of 1 mm betweenthe panels. The joints between the panels are to be duly jointed andfinished using recommended jointing calcium silicate basedcompound and fiber joint tape roll 50mm wide (90 metre )roll andtwo coats of primer suitable for panelling as per manufacturer's specification as per direction of Engineer-in-Charge all complete.
With 15 mm thick fully perforated square/butt edge lightweight calcium silicate panels/ tiles
97.2
-
-
... More
providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/ masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer- in-Charge.
(The payment shall be made on the basis of actual weight of approved grout injected.
Epoxy injection grout in concrete/RCC work of approvedmake
116.92
-
-
... More
Providing and inserting 12mm dia galvanised steel injection nipplein honey comb area and along crack line including drilling of holesof required diametre (20mm to 30mm) up to depth from 30mm to80mm at required spacing and making the hole & crack dust free byblowing compressed air, sealing the distance between injectionnipple with adhesive chemical of approved make and allow it to curecomplete as per direction of Engineer-In-Charge.
500
-
-
... More
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
7774.87
-
-
... More
Carriage of materials
-
-
-
... More
Bricks Lead = 1 k+7 P(8km)
584180.35
-
-
... More
Sand lead = 10 km
2050.77
-
-
... More
Stone chips lead = 22 km
1826.44
-
-
... More
Stone metal lead = 22 km
615.12
-
-
... More
Local Sand lead = 3km
334.49
-
-
... More
Point Wiring in PVC Conduit, with Modular type Switch:- Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with modular type switch, modular plate, suitable size of GI box etc as required.
Group C
714
-
-
... More
Supplying and fixing batten/ angle holder including connection etc. as required.
50
-
-
... More
9/10 Watt LED Bulb
154
-
-
... More
S.I.T.C of following rating recess/surface mounting round/square shape downlight with pressure die cast housing for single phase supply voltage. Luminaire shall conform to IS:3022 part-5/ section-5 or IEC:62722 with all necessary accesories as required.
80W LED Flood light
20
-
-
... More
S.I.T.C of following rating surface mounted LED tube lightfitting suitable for 230V 50Hz, single phase supply etc. complete as required.
20w/22w LED tube
130
-
-
... More
S.I.T.C of following rating recess/surface mounting round/square shape downlight with pressure die cast housing for single phase supply voltage. Luminaire shall conform to IS:3022 part-5/ section-2 or IEC:62722 with all necessary accesories as required.
-
-
-
... More
2' X 2' LED Panel Light (34W)
120
-
-
... More
18/20W LED Round Downlight
120
-
-
... More
12" (300mm) Exhaust fan
56
-
-
... More
16" (400mm) Wall fan
50
-
-
... More
Supply of LED Batten (20/22W)
2
-
-
... More
Supply and installation of Ceiling fan 48" (1200mm)
2
-
-
... More
Supply fitting fixing of Recess Mounting LED Round Down light (12W)
12
-
-
... More
Supply of LED Street light (45/48W)
4
-
-
... More
Installation of exhaust fan upto 450mm sweep in the existing opening, including making the hole to suit the size of he above fan making good the damage, connection, testing, commisionig etc as required.
54
-
-
... More
S/F Modular type electronic fan regulator :- Supplying and fixing stepped type fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required.
62
-
-
... More
Supply, fitting, fixing and testing of 1200mm Sweep, BLDC, 5Star Fan.32 W
55
-
-
... More
S/F PVC Conduit:-
Supplying and fixing of following sizes of PVC conduit alongwith the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required for Tele, RJ45 Cat 6 data outlet for computer network.
44
-
-
... More
S/F Modular type Switch / Socket:-
Supplying and fixing following modular type switch / socket on the existing modular plate and switch box including connections but excluding modular plate etc as required.
-
-
-
... More
5/6 amps,one way switch
4
-
-
... More
5/6 amps, 3 pin socket outlet
4
-
-
... More
Telephone socket outlet
2
-
-
... More
Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch connection, painting etc, as required.
49
-
-
... More
S/F light plug point with modular type accessories :-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
49
-
-
... More
S/F Ceiling Rose:-
Supplying and fixing 2 pin ceiling rose on the existing junction box/ wooden block including connection etc as required.
8
-
-
... More
S/F Batten / Angle Holder:-
Supplying and fixing batten / angle holder including connection etc as required.
10
-
-
... More
ITC fluorescent fitting directly on surface :- ITC fluorescent fitting directly on surface :- installation testing and commissioning of Pre - wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc, directly on ceiling / wall, including connection with 1.5 Sq. mm. FR PVC insulated, copper cond.
2
-
-
... More
ITC Ceiling Fan:-
ITC Ceiling Fan:- Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (Up to 30 cm) with 1.5 sq. mm. FRPVC insulated,copper conductor,single core cable etc, as required.
2
-
-
... More
S/F 20amps SPN MCB industrial Socket:-
Supplying and fixing 20 amps 240V, SPN industrial socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP MCB insheet steel enclosure on surace or in recess with chained metal cover for the socket outlet and complete with connections, testing & commissioning etc.
14
-
-
... More
S/F Modular boxes, base & cover plate :-
Supplying and fixing following size/ modules G.I. box along with modular base & cover plate for modular switches in recess etc as required.
-
-
-
... More
1 or 2 module (78 mm x 78 mm x 45 mm)
2
-
-
... More
4 module (78mm x 140mm x 50mm)
30
-
-
... More
8 module (78mm x 230mm x 60mm)
15
-
-
... More
12 module (135mm x 205mm x 60mm)
20
-
-
... More
S/F Modular type blanking plate :-
Supplying and fixing modular blanking plate on the existing modular plate & switch box but excluding modular plate as required.
30
-
-
... More
Power Plug Wiring in PVC conduit (2x4 sq. mm):-
Wiring for light/power plug with 2x4 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit along with 1 number 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.
60
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of PVC insulated copper conductor single core cable in surfacce/ recessed medium class PVC conduit.
-
-
-
... More
4 X 16 sq. mm + 2 x 6 sq.mm Earth Wire
550
-
-
... More
4 X 10 sq. mm + 2 x 6 sq.mm Earth Wire
300
-
-
... More
CIRCUIT WIRING COPPER IN PVC CONDUIT FOR 5A, 15 A & SWITCH BOARD:-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of PVC insulated copper conductor single core cable in surfacce/ recessed medium class PVC conduit.
-
-
-
... More
2 X 4 sq. mm + 1 x 4 sq.mm Earth Wire (Sockets)
710
-
-
... More
2 X 2.5 sq. mm + 1 x 2.5 sq.mm Earth Wire (Switch Boards)
710
-
-
... More
Telephone Wiring in Existing Conduit:-
Supplying and drawing following pair,0.5 sq. mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface/recessed PVC conduit as required.(2 pair)
50
-
-
... More
S/F S.P. MCB DB: Supplying and fixing following way single pole and neutral sheet MCB distribution board, 240 volts on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatised and powder painted including earthing etc. as required ( But without MCB/RCCB/ ISOLATOR).
8Way,Single Door
2
-
-
... More
Copper earth pipe electrode :-
Earthing with G.I. earth pipe 4.5mtr. long 40mm dia including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal or coke and salt as required.
2
-
-
... More
COPPER EARTH PLATE ELECTRODE:-
Copper earth plate elecrtode - Earthing with copper earth plate 600mmx 600mm x 3mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. as required (with charcoal or coke and salt)
2
-
-
... More
S/L 8 SWG copper wire in ground :- S/L 8 SWG G.I. wire in ground :- Supplying and laying 8 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc. as required.
40
-
-
... More
P/F 25mm x 5mm copper earth strip in surface/ recess :-
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc., as required.
33
-
-
... More
S/L 25 mm x 5 mm G.I. earth strip in ground :-
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including soldering etc.
20
-
-
... More
P/F G.I. lightning conductor finial :-
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
1
-
-
... More
G.I. earth plate electrode :-
Earthing with G.I. earth plate 600mm x 600mm x 3mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) as required.
1
-
-
... More
P/ F G.I. Lightning conductor tape in horizontal run :-
Providing and fixing G.I. tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor complete etc. as required (horizontal run).
25
-
-
... More
P/ F G.I. Lightning conductor tape in vertical run :-
Providing and fixing G.I tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor complete etc. as required (vertical run).
20
-
-
... More
Laying copper/ G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.
20
-
-
... More
Supply of following sizes and core PVC/XLPE insulated, PVC sheathed armoured electrical cable with aluminium conductor for working voltage upto 1.1 KV etc as required.
-
-
-
... More
3.5c x 240 sq.mm
300
-
-
... More
3.5c x 185 sq.mm
75
-
-
... More
3.5c x 70 sq.mm
75
-
-
... More
MV Cable Laying upto 25 Sq mm in ground:- Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc, as required.
150
-
-
... More
Providing and fixing of XLPE, Aluminium Armoured PVC Cable confirming to IS IS7908 (Part-1) 1988 0f grade 1.1KV. Make:- Havells / Finolex / Polycab 1 R for each floor separately ,3.5 Core 50 Sq. mm. 1.1 KV XLPE Al. Ar. Cable from Main LT Panel to VTPN L.D.B Panel.
150
-
-
... More
Laying of one nùmber PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size exceeding 35 sq mm but not exceeding 95 sqmm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
46
-
-
... More
Laying of one nùmber PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size exceeding 95 sq mm but not exceeding 185 sqmm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
45
-
-
... More
Laying of one nùmber PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size exceeding 185 sq mm but not exceeding 400 sqmm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
270
-
-
... More
1.1 KV Cable End Termination:- Supplying and making indoor cable end termination with brass double compression gland and aluminium lugs for following size of PVC insulated XLPE Al. Ar. Cable of 1.1 KV grade as required.
-
-
-
... More
3.5c x 240 sq.mm (62mm)
4
-
-
... More
3.5c x 185 sq.mm (57mm)
2
-
-
... More
3.5c x 70 sq.mm (38mm)
2
-
-
... More
Supplying and fixing following way three pole & neutral ,sheet steel, MCB distribution board, 415 volts, onsurface /recess, complete with tinned copper bus bar, neutral bus-bar, earthbar ,dinbar, interconnections, powder painted including earthing etc. as required.
6 Way (4+18) Double Door, Horizontal type
12
-
-
... More
Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10kA 'C' curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connection, testing & commissioning etc. as required.
-
-
-
... More
6/32A Single Pole
12
-
-
... More
6/32A ,DP
3
-
-
... More
63A rating, TPN MCB, "C" curve 10 KA breaking capacity.
7
-
-
... More
40A rating, TPN MCB, "C" curve 10 KA breaking capacity.
3
-
-
... More
6/32A rating, SPN MCB, "C" curve 10 KA breaking capacity.
110
-
-
... More
Supplying and fixing following rating four pole, (three phase and neutral) 415 volts, residual circuit breaker (RCCB) having a sensitivity current 30 milli amperes in the existing MCB DB complete with connection, testing & commissioning etc. as required.
-
-
-
... More
25 amps
3
-
-
... More
40 amps
7
-
-
... More
MAIN DISTRIBUTION BOARD FOR 1000 CAPACITY AUDITORIUM
Design, Fabrication, Supply, Erection,Testing and commisioning of Powder coated Indoor Type Main Distribution Board fabricated out of 14 guage CRCA sheet steel in cubical, compartmentallised, free standing , dust and vermin proof, (degree of protection-IP54)with reinforcement of suitable size angle iron, channel, T -iron or flats as required. Cable gland plates shall be provided on top as well as bottom of the panels. Panels shall be treated with all anti-corrosive process before painting as per specification. Panels shall be suitable for 415V, 3-Phase, Four wire, 50 Hz supply complete with earth bus and lifting hooks as required in case of large panels.Approval shall be taken for each panel before fabrication. (All hardwares like nuts and bolts used shall be Galvanized and Zinc passivated) as per Specification.
-
-
-
... More
The Main Distribution Board shall broadly comprise of the following equipment/components)
Incoming Feeders:-
Incomer-
400A, TPN MCCB (P-2), 35 kA for 1 sec (Ics=100%Icu) Breaking capacity (Variable thermal rating 80-100%, variable magnetic rating 6-10 times) with factory made silver plated copper spreading links- 1 No. (AC Mains)
100A, TPN MCCB (P-2), 16 kA for 1 sec (Ics=100%Icu) Breaking capacity (Variable thermal rating 80-100%, variable magnetic rating 6-10 times) with factory made silver plated copper spreading links- 2 Nos. (DG OG + Changeover)
-
-
-
... More
Outgoing Feeders:-
250A TPN MCCB 35kA - 01 No.
63A TPN MCCB 16kA - 04 Nos.
63A TPN MCB 10kA - 08 Nos.
500A TPN Copper bus bar in metal encolsure with fixing clamps
Indication lamps(On- Off Trip Power On -- RYB)
Supplying, Installing, Testing & Commisioning cost of Main Distribution Board for 500 Capacity Auditorium building all complete with all necessary items as per direction of E/I.
1
-
-
... More
HVAC DISTRIBUTION BOARD FOR 1000 CAPACITY AUDITORIUM
Design, Fabrication, Supply, Erection,Testing and commisioning of Powder coated Indoor Type Main Distribution Board fabricated out of 14 guage CRCA sheet steel in cubical, compartmentallised, free standing , dust and vermin proof, (degree of protection-IP54)with reinforcement of suitable size angle iron, channel, T -iron or flats as required. Cable gland plates shall be provided on top as well as bottom of the panels. Panels shall be treated with all anti-corrosive process before painting as per specification. Panels shall be suitable for 415V, 3-Phase, Four wire, 50 Hz supply complete with earth bus and lifting hooks as required in case of large panels.Approval shall be taken for each panel before fabrication. (All hardwares like nuts and bolts used shall be Galvanized and Zinc passivated) as per Specification.
-
-
-
... More
The HVAC Board shall broadly comprise of the following equipment/components)
Incomer-
250A, TPN MCCB (P-2), 35 kA for 1 sec (Ics=100%Icu) Breaking capacity (Variable thermal rating 80-100%, variable magnetic rating 6-10 times) with factory made silver plated copper spreading links- 1 No. (AC Mains)
-
-
-
... More
Outgoing Feeders:-
100A TPN MCCB 16kA - 06 Nos.
63A TPN MCCB 16kA - 08 Nos.
300A TPN Copper bus bar in metal encolsure with fixing clamps
Indication lamps(On- Off Trip Power On -- RYB)
Supplying, Installing, Testing & Commisioning cost of HVAC Board for 500 Capacity Auditorium building all complete with all necessary items as per direction of E/I.
1
-
-
... More
Silent type D.G Set of capacity 50 KVA Three Phase With AMF Panel IS/IEC-60034-1 IS: 1460 IS: 13018
1
-
-
... More
Oil (Fuel) Filter for 62.5 TO 125 KVA DG set
1
-
-
... More
Mobil Filter for 250 KVA DG set
1
-
-
... More
Air (inner+outer) Filter for 250 KVA DG set
1
-
-
... More
Mobil Premium blue 15W40
5
-
-
... More
Coolent (exhibitor corrosion)
10
-
-
... More
SMPS 24V Battery charger for DG set
1
-
-
... More
Providing and fixing male ended 15mm dia brass bib cock of approved quality (Wt. not less than 350 gms.) with extra socket all compere as per specification and direction of E/I.
25
-
-
... More
Providing and fixing N.P./C.P. brass/PVC procelain shower rose of 15mm inlet etc. all complete as per specification and direction of E/I. Shower Rose - 125mm
20
-
-
... More
Providing & fixing 15mm size pillar cock C.I. body brass spindle pillar cock of approved quality as per specification & direction of E/I.
30
-
-
... More
Providing and fixing brass/C.I. stop cock of approved quality all complete as per specification and direction of E/I.
15 mm dia
30
-
-
... More
Providing and fixing G.M. non return valve Horizontal/Vertical type of approved quality as per specification and direction of E/I.
-
-
-
... More
Horizontal - 25 mm dia
10
-
-
... More
Horizontal - 32 mm dia
2
-
-
... More
Making holes in walls for laying G.I. pipe and restoring the same after pipe laying as per specification and direction of E/I.
-
-
-
... More
125 mm thick wall
20
-
-
... More
250 mm thick wall
15
-
-
... More
Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I.
-
-
-
... More
Mirror (300 x 450mm)
30
-
-
... More
C.P. brass tower rail
30
-
-
... More
C.P. brass soap container medium quality with screw and hinges etc.
30
-
-
... More
Supplying, fitting and fixing viterious white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I. 'p' trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings C.I. or C.C. brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair or viterous white glazed earthenware footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less than exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I.
580mm long - With 12.5 lit. low level PVC cistern
20
-
-
... More
Supplying, fitting and fixing 40mm highb viterous white glazed earthen E.W.C. with 'P' trap of parry hindustan or any other approved I.S.S. make including supplying and fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fitting with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stope cock of approved quality weight not less than 450 grams 15mm PVC alkathene pipe 45cm. long with brass coupling at both ends and white/black plastic soild state seal and lead of commander/cuckoo or other I.S.S. make with hinges or screws etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide priming all complete as per specification and direction of E/I.
With 'P' trap - 12.5 lit low level PVC Cistern
10
-
-
... More
Supplying, fitting and fixing flat back or angular, lipped front viterous white glazed earthen ware urinal of 'Hindustan "Parry" or any other approved I.S.S. make with 5 liters capacity C.I. automatic flushing cistern of reliance for any other I.S.S. approved make with all fittings with C.I. or R.S., brackets, standard size G.I. flush pipe with fitting clamps, 15mm, C.I. body brass spindle stop cock of approved quality weight not less than 400 grams, 15mm P.V.C./Alkthene pipe 450mm long with brass coupling at both ends and doing plumber joints including painting coat of red oxide cutting wall and floor making good the same etc. all complete as per specification and direction of E/I.
(a)Flat back or Standing Cornar
22
-
-
... More
Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S. approved make supported on pointed C.I. or R.S. brackets 32m C.I. brass waste 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grms. 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I.
22
-
-
... More
Supplying NP2 R.C.C. hume pipe with colour as work site as per direction of E/I.
150mm dia
90
-
-
... More
Approved basic rates construction materials for preparation of schedule of rates only, (Material should conform to relevent B.I.S. specification). The rates are inclusive of all taxes, royalty, cess and carraige but exclusive of contractor's profit and overhead charges -
Special type of C.P. Bath room fitting for V.I.P. buildings (JAL, Jaguar, Marc or equivalent mark)
-
-
-
... More
Angular Stopcock /2 way bib cock
30
-
-
... More
Telephonic shower flexible pipe
30
-
-
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
... More
75 mm diameter
200
-
-
... More
110 mm diameter
150
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
... More
Single tee without door - 75x75x75 mm
12
-
-
... More
Single tee without door - 110x110x110 mm
24
-
-
... More
75 mm bend
12
-
-
... More
110 mm bend
24
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall
-
-
-
... More
25 mm nominal outer dia Pipes
90
-
-
... More
32 mm nominal outer dia Pipes
120
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
-
-
-
... More
15 mm nominal outer dia Pipes
110
-
-
... More
20 mm nominal outer dia Pipes
180
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank, ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank.
8000
-
-
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
-
... More
Cost of Driling 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressureand equipmentsas well as fule, lubricantsand cost of transportation of rig machine annd other vehical up to Site.
-
-
-
... More
(a) From 0.00 M to 50.00 M below G.L.
150
-
-
... More
(b) From 51.0 M to125.00 M
225
-
-
... More
(c) From126.0 M to150.00 M
75
-
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.
200 mm nominal size dia
75
-
-
... More
Development of tube well in accordance with IS : 2800 (part I) andIS: 11189, to establish maximum rate of usable water yield withoutsand content (beyond permissible limit), with required capacity aircompressor, running the compressor for required time till well isfully developed, measuring yield of well by "V" notch method or anyother approved method, measuring static level & draw down etc. bystep draw down method, collecting water samples & getting testedin approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessoriesetc., all as per requirement and direction of Engineer-in-charge
6
-
-
... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:
200 mm dia
6
-
-
... More
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.
200 mm clamp
6
-
-
... More
Supplying 100mm dis submersible pump sets confirming to 8034 and motor confirming to IS 9283 pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller. Motor suitable for working on 415 + 10, 3HP, 50 Hz, AC supply with cable guard, thurst carbon/fiber bearing to withstand entire hydraulic thurst, water proof winding shall be provided. The pump set shall be suitable for diret coupling Pump shall have suitable outlet as per manufacturers design. Anti thurst stream lined non return valve shall be provided with pump, 3 meter submersible copper conductor cable in single/double run shall be provided with each pump.
Submersible pump set 100mm dia (with Polypropylene/Noryl Impeller) up to 20 stages
2 HP
3
-
-
... More
Supply fitting and fixing of standered make starter pannel Board with arrangement of all necsssury protection including all taxes ,royalty etc all complete job as per direction of E/I.
3
-
-
... More
Supplying fitting and fixing 3 crore 4 sqmm Flat copper submersible cable FINOLEX / HEVELS make including all taxes ,royalty etc all complete job as per direction of E/I.
390
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
50 mm nominal outer dia Pipes
345
-
-
... More
Excavation in Soil using Hydraulic Excavator CK 90 and Tippers with disposal upto 1000 metres. (Excavation for roadwork in soil with hydraulic excavator of0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m)
Including Royalty etc@ Rs. 27.48 per cum, cost of watering, rolling & compaction.
1500
-
-
... More
Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).
65
-
-
... More
Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment).
50
-
-
... More
Supplying and stacking at site dump manure from approved source, including carriage up to 1km (manure measured in stacks will be reduced by 8% for payment)
50
-
-
... More
Fine dressing of the ground
5000
-
-
... More
Spreading of sludge, dump manure and/or good earth in required thickness as per direction of Officer-in-charge (Cost of sludge, dump manure and/or good earth to be paid seprately
150
-
-
... More
Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge
150
-
-
... More
Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge.
1000
-
-
... More
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to150 mm measured
2000
-
-
... More
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water)
TREE Plants
170
-
-
... More
Providing and displaying of Areca Palm plant, having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 20 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge.
40
-
-
... More
Providing and Displaying plants Petunia hybrid different variety in different colour well developed with fresh and healthy foliage in full bloom in 25 cm Earthen Pot/Plastic Pot as per direction of the officer-in-charge.
30
-
-
... More
Providing and Displaying plants Marigold jaffri orange/yellow/Russet colour well developed with fresh & healthy foliage with 40 to 50 flowers in bloom specimen plant 60 to 75 cm ht in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.
20
-
-
... More
Providing and stacking of Bottle palm of ht. 150-180 cm bottom girth 20-25 cm well developed in big poly bags of size 25 cm as per direction of the officer-in-charge.
20
-
-
... More
Providing and stacking of Azadirachta indica ( Neem ) of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge.
20
-
-
... More
Providing and stacking of Delonix regia (Gulmohar) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
20
-
-
... More
Providing and stacking of Polyalthia pendula (Ashok Pendula) of height 150-165 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge.
20
-
-
... More
Non Schedule
-
-
-
... More
Supply , fitting & Fixing Non-skit vetrified tiles 600 x 600mm
329.04
-
-
... More
BOXING RING.
brand boxing
ring size made of 24fit x 24fit structure made of MS Tubes size: 50x50mm heavy quality painted structure, all the structure is foldable fitted by nut bolt easy assembling system, vertical MS iron pipe 3 inch round, Rope 20mm thick made of hemp, rope color red, blue, white, sewed by fabrics , Top made of water proof plywood and rubber sheets, upper cover pvc coated fabric for non slippery
surface, 1 side stair, surrounding curtain,total best quality.
1
-
-
... More
WRESTLING MATT WITH COVER MATT SIZE. 2mt x 1mt x 50mm, MATERIAL CHIP BONDED FOAM WITH PVC COVER 550 GSM,72 PCS SET, SIZE. 12 mtr x 12 mtr x 50mm
1
-
-
... More
CLASSIC MODEL Teable Tennis
international standard regulation top size: 2740 x 1525 x 760mm, top thickness 25mm laminated high quality, frame size 75mm x 25mm, leg size: 100mm x 50mm, wheel size 125mm x 25mm, 4 wheels with lock, 4 wheels without lock, double child safety lock system,foldable and movable anywhere , indoor, complete powder coated structure, with net and post cardboard packing, weight: 155kg. approx
3
-
-
... More
Commercial Motorised Treadmill
Specifications:-• Dimension: 84″(L) X 36″(W) X 63″(H).• Motor: AC Motor, 4.5 HP Continuous Duty, 8.0 HP Peak Duty.• Speed: 1.0To 22 Kmph.• Power Requirements: 220V AC. • Max User Weight: 170 Kgs.
1
-
-
... More
Commercial Cross Trainer • Dimension: 84” (L) X 30”(W) X 69”(H) • Strides: 20 Inches natural strides.• Maximum Watt: 300 Watts.• Resistance Level: 16 Levels.• Fly Wheel: 9 Kgs precision balanced. • User Weight: 150 Kgs.
1
-
-
... More
Commercial Spin Bike Specifications:• Dimension : 45” (L) x 21”(W) x 47”(H)• Spin Wheel : 21 Kgs high inertia spin wheel.• Resistance Level : Pad breaking system with infinitely adjustable breaking power.
• Resistance System : Adjustable resistance . "+" "-" tension control
• Drive System : Centre design drive, Smooth, quiet belt drive mechanism.
• Display: LCD console to track all your progress, time, distance, speed, calories and heart rate.
• Seat : Horizontally and vertically adjustable saddle with quick release.
• Handlebars: Have adjustments for up and down.
• Crank Assembly :3 Pieces crank assembly with increased strength provides
dependable performance for every rider. • User Weight : 150 Kgs.
1
-
-
... More
Shoulder Press • Dimensions : 61’’(L) x 50’’(W) x 64’’ (H)• Weight Stack : 90.7 Kgs/200 Lbs.
1
-
-
... More
Lat PullDown • Dimensions : 60’’(L) x 50’’(W) x 75’’ (H)• Weight Stack : 90.7 Kgs/200 Lbs.
1
-
-
... More
Leg Extension + Leg Curl
1
-
-
... More
Pec Decfly • Dimension : 50"(L) X 56"(W) X 78"(H).• Weight Stock : 90.7 kgs /200lbs
1
-
-
... More
Seated Calf Specifications:DimensionsFolded: (In) • Length 43" • Width 86" • Height 91"FrameHigh Tensile Strength Steel, Continuous Welded, Factory Assembled Weight Frame. TubeRectangular Tubing
1
-
-
... More
Olympic Incline Bench Specifications: High Tensile Strength Steel, Continuous Welded, Factory Assembled Weight Frame.
1
-
-
... More
Olympic Decline Bench High Tensile Strength Steel, Continuous Welded, Factory Assembled Weight Frame.
1
-
-
... More
Olympic Flat Bench
1
-
-
... More
Adjustable Bench Specifications:DimensionsFolded: (In) • Length 64" • Width 30" • Height 32"FrameHigh Tensile Strength Steel, Continuous Welded, Factory Assembled Weight Frame. TubeRectangular Tubing
1
-
-
... More
Squat Rack Specifications:DimensionsFolded: (In) • Length 73" • Width 68" • Height 71"FrameHigh Tensile Strength Steel, Continuous Welded, Factory Assembled Weight Frame. TubeRectangular Tubing
1
-
-
... More
Bouncer Aerofit Dumbbells 200 kg
1
-
-
... More
Aerofit Plates 200 kg
1
-
-
... More
OLYMPIC BAR 7FT
1
-
-
... More
EZ BAR 5FT
1
-
-
... More
OLYMPIC BAR 5FT
1
-
-
... More
Specification of Wooden flooring
Surface board - BWF Approved WOOD SPORTS FLOORING finishing with 21mm thick, 53 to 93 mm wide and in random length in tongue and groove shape. The edges of the boards should have finger lock groove and the bottom side with air pass groove.
The under frame - Made of pine wood runners of 70mmx45mm, treated with anti-termite solution and fixed on the bottom side with 10/19mm thick Rubber air cushioned pads, stappled through the two wings at 300mmx300mm. Installation - IPS subfloor treated with a vapour barrier to be placed on the leveled IPS sub floor before laying the under frame, the runners having air cushion pads to be placed on the vapour barrier in perfect level at 350mm in 1 direction:
Finish - The surface board to be screwed to the runner through the tongue only and will lock the screwed tongue by the groove of adjoining board. ends of the boards will be locked by inserting the wooden fingers through the edge grooves and fixed with suitable adhesive, an expansion of 15 to 20 mm to be left open between the wooden flooring the surrounding tiled area / walls.
finishing - After installation the floor will be machine sanded in uniform level and finishing with P.U. POLISHING water based polyurethane lacque
BWF
Certified-Vinyl matt
4.5mm
PVC sport flooring for Badminton Court:
* 100% PVC + Glass fibre + Imported fabric mesh Specification of Vinyl Flooring
a)Thickness - 4.5 mm
b)Roll Size - 15X1.8 Mtr (4 Roll per Court)
C)Warranty 5 Year
d)Jem Surface
218.98
-
-
... More
BWF
Vinyl Flooring
Certified-
a)Thickness - 4.5 mm
Vinyl matt
4.5mm
c)Warranty 5 Year d)Jem Surface
PVC sport flooring for Badminton Court:
b)Roll Size - 15X1.8 Mtr (4 Roll per Court)
*100% PVC + Glass fibre + Imported fabric mesh Specification of
200.12
-
-
... More
Supply and
MOVABLE BADMINTON POLE
installation MADE OF MAIN PIPE 40 X 40MM of Movable SQUARE, 60 KG WEIGHT EACH Badminton SIDE, ADJUSTABLE RACHIA WITH poles, NET, FINE QUALITY SPRAY PU PAINT
2
-
-
... More
Refree Chair for Badminton Court
Total Height 9.5ft
Total Sitting height 8ft (if sitting chair)
Seat size 20"*20%
Bottom Front width 3ft
Bottom Side width4ft
Made up with 1.5" od & 4"2 ms pipe
Epoxy white painted
2
-
-
... More
Asphalt Subbase
Chemical Treatment of Entire Area to make Land infertile, this will be done by spraying diluted chemical mixed with water. Layer of Compacted 6'** WMM/WBM using Stone Size 40 MM to 60 MM and Compaction of same in One Layer. Cleaning of Sub base (Wire Brushing) before starting Asphalting Layers
*Tack/Primer Coat to be applied before BM & AC Layers (Qty Asphalt Base Consumption will have Tack Coat of Upto 3kg Per 10 Sq.Meter).
Compacting Layer of Bituminous Layer of Minimum 30 mm Thickness using 12 MM Stone with 80-100/60-70 Grade Bitumen .Bituminous binder percentage would be close to 3.5%. Compacting Layer of AC of Minimum 20 mm Thickness using 6mm Stone with 80-100/60-70 Grade Bitumen. Bituminous binder percentage would be close to 3.5%. Final Layer of Seal Coat using Stone Dust with Bitumen to make the surface appropriate for Synthetic Installation. "
395
-
-
... More
Edge Wall
Edge Wall - Providing and construction of Edge wall around the court to act as a barrier for infill and Asphalt material. Thickness of edge wall - 230mm. Height of Edge wall - 200-250mm ( as per site requirerfent). PCC of Concrete of nominal Mix ration 1:3:5 up to a compacted thickness of 40mm will be done below the edge wall to give a firm base.
RMIT
80
-
-
... More
DRAINAGE saucer drain of width 6 inches. The height of drain will be made to match the side of the court along the toe wall. This drain will channelize water till one corner of the court. From their drainage connection to be provided by client. MS Grating drain cover made of with 3mm L angle both sides & FLAT strip in middle, design as approved
by our inhouse designer
80
-
-
... More
Supply and installation of ITF certified 8 layers acrylic system with thickness up to 3mm. The flooring should be certified by International Tennis Federation (ITF) and Supplying and laying of Acrylic latex line marking. All complete and as per specification and as per by our inhouse designer
Acrylic 8
layer
synthetic floor in 8 layer where
1 layer of resurface or filler,
5 layer of liquid rubber
2 layers of colour top quals
specification and direction of Engineer in charge.
395
-
-
... More
Fenicing on periphery of the court: Vertical Pole of 100x100x3mm MS Square Pipe (Height- 15Tect)Two adjacent poles to be placed vertically for each cage which are to be joined using clamp.
2. Horizontal Pole 50x50x2mm MS Square Pipe (Top, Middle, Bottom)
3. Base Plate 200x200x6mm MS Plate with 4 Nos of 12mm Dia Hole (To be fix on Flat slab with 12x200m Anchor bolt)
4. Gi Chain Link fence of size 50x50x5mm
5.. Painting on M5 Pole - Primer 1 Coat, Enamel 2 Coat- Green Colour
6. Painting on GI Chain link - Enamel 1 Coat- Green Colour
7. Total Structure Height 15 Feet
8. Installation lype- Welding on Poles and GI mesh.
288.54
-
-
... More
FIXED VOLLEYBALL POST
Exact Size 8.2 Fl
PIPE SIZE - 3" & 4* pipe Shape ROUND
pipe Thickness - 2.5- 3.2mm
Guage of Steel - 10 to 8 37
Make of MS Pipe- apollo or equivalent
WITH RATCHET SYSTEM FOR NET TIGHTENING AND UPRIGHT SOCKETS FOR HIEGHT ADIUSTMENT MEN / WOMEN epoxy RED POLES & YELLOW
UPRIGHT SOCKETS Paint
1
-
-
... More
Lighting
LIGHTING
Poles & Wiring Specs:
Supply of Poles: Providing and fixing of Light poles with 4' dia MS pipe with epoxy painted.
pole shall be 78 ft tall. (24 hi above ground level and 411 will be buried underground i. Al weather Detribution box to be fined near the court x 68 Amps Isolator will be fixed in distribution box with core 7 55g mm Lopper (Underground) cable to be laid Gitrines: 200 MUFD & Ory-4 Poles 16 fixtures
4
-
-
... More
Supply & fitting of ShyamJyoti™ LED Based Solar Street Lighting System
Luminary : 12W LED Luminary Luminary Housing- Weather Proof Housing Structure- Hot Deep Galvanized Module Pole : Hot Deep Galvanized MS Pole (4.5 Mtr.)
Battery Box : Corrosion Resistant Painted Power Coated Metal Battery Box Other : Suitable Cable, Etc. Battery : 19.8Ah 14.8V Lithium-Ferro Battery of MNRE Approved Module : 75Wp of HBL / Gautam Solar/IEC Equivalent (Cost includes 10% CP & 5 % OHC)
32
-
-
... More
Bobbin Wound Top Mount Filter Dia 900 mm
4
-
-
... More
Flow = 30 m3/hr
Filtration Velocity = 27 m3/hr/m2Max. Working Pressure = 2.5 Kg/cm202" MPV & 03 Pcs Unions
4
-
-
... More
Filter Media- sand (In Killograms)- Fine Machine Rounds
Sand Media 0.2 – 0.4 mm - 600 KG
Sand Media 1. – 2.0 mm Sand Media 2.0 – 4.0 mm Gravels 6.0 - 12.0 mm Gravels 12.0 - 25.0 mm
2400
-
-
... More
Offline Dosing Pump 0-6 LPH NSL Series- 02 Kg
4
-
-
... More
Floor Inlet ABS (Main Pool-36 Kids Pool-04)
37
-
-
... More
Main Drain Frame 300 mm * 300 mm
10
-
-
... More
Suction Inlet (Main Pool-4 Kids Pool-1)
6
-
-
... More
25 m3 UV -C Ozone Disinfection Nano Tech With Timer
4
-
-
... More
Overflow Grating 300 mm * 25 mm (112 Mtr)
110
-
-
... More
SS Ladder 2 Step AISI 304 Handrails Dia 42 mm- Kids Pool
2
-
-
... More
SS Ladder 3 Step AISI 304 Handrails Dia 42 mm- Shallow Ends
2
-
-
... More
SS Ladder 4 Step AISI 304 Handrails Dia 42 mm- Deepend Ends
2
-
-
... More
Ball Valve 50 mm Dia
8
-
-
... More
Ball Valve 63 mm dia
20
-
-
... More
Ball Valve 75 mm Dia
14
-
-
... More
Non Returning Valve Dia 63 mm
6
-
-
... More
Non Returning Valve Dia 75 mm
6
-
-
... More
Vaccum Head 18" Alumuniam Vacuum Head With 04 Wheels
1
-
-
... More
Vaccum Hose 1.5" - 15 m
1
-
-
... More
Telescopic Pole 4.8 M Long
1
-
-
... More
Curved Brush
1
-
-
... More
Deep Leaf Net
1
-
-
... More
Test Kit
1
-
-
... More
Chemical -Tri Chloroisocyanuric Acid TCCA 90
50
-
-
... More
500 mm x 500 mm Starting Block_ For Racing -Stainless Steel Base
6
-
-
... More
25 Mtr Lane Rope- With Spring & Adjustable
6
-
-
... More
Anchor Cup -Lane Rope -Stainless Steel 304- Both Side
12
-
-
... More
Lane Rope Roller With Wheels -Stainless Steel 304
3
-
-
... More
Pool Cover - 05 Mtr x 25 Mtr Each
4
-
-
... More
Pool Cover Roller
4
-
-
... More
Selfpriming Pump 3 HP /Single Phase (03)-Re circulation
Thermal Protector 2900 RPM. Motor : IPX5Insulation class : FFlowrate : 25 m3/hrHead : 12 MtrVoltage : 220/240 VPower : 2.2 kW / 3 HP
5
-
-
... More
Supply & Installation of u-PVC Pipes & Fittings 63 mm dia Mtr. 75 mm dia Mtr.
90 mm dia Mtr.
110 mm dia Mtr.
160 mm dia
1
-
-
... More
Supply & Installation of Control Panel and Cables
03 Core 2.5 sq mm / 32-A TP MCCB Outgoing Feeder Suitable For 3 HP Pump DOL Starter6 A TPN MCB PH Dosing Pumps & LED Lights100 Amps TP Incoming MCCB
1
-
-
... More
Installation, Testing & Commissioning Of Swimming Pool Eqipment
1
-
-
... More
Consultancy and Supervision of the Pool Civil Project/ Drawings
1
-
-
... More
Underwater RGB LED Light 54 W/12V in steel/ PVC (18* 3W)
45
-
-
... More
Cable Conduit - Chain Dlda Pipe
1
-
-
... More
Junction Box in ABS/ Deck Box
10
-
-
... More
SMPS including RGB remote & Pannel including 04 core wire
2
-
-
... More
PX_1469cd_gl-b (18x8) Design Cad (School Lago) & Micky Mouse
400
-
-
... More
MS 10 For Swimming Pool (Floor & Wall) Main Pool + Kids Pool
5600
-
-
... More
Lane Marking Blue - Main Poll
500
-
-
... More
Adhesive 20 Kg Bag - Ardex Endura
70
-
-
... More
Grout 10 Kg Bag - Ardes Endura
70
-
-
... More
Fixing and Acid wash (Labour Charges) with acid wash
6500
-
-
... More
100 KW Heat Pump (Commercial) Including Installation Power Supply: 380-400V/03PH/50 HZ
2
-
-
... More
Mural with the help of Glass Tiles
89.5
-
-
... More
Assistant Commissioner of Police (ACP)/HPL
121.8
-
-
... More
13 Pax Unit 1 MODEL CODE: 13 Pax Lift
2
-
-
... More
Add GST 18 %
18
-
-
... More
Add Labour cess 1%
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements