State Building Construction Corporation Limited Tender
Search from across the categories, cities, and authorities to find the latest Jharkhand tenders. Every Jharkhand tender is curated from credible sources of government websites (eProcurement Jharkhand portal) and newspapers, thus ensuring the credibility of the information presented to you. For more information on Jharkhand tender bidder registration, the login process and more read the FAQs section on this page.
Costs
EMD
₹ 8,02,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_JSBCC_88941_1Bid Award Id
ViewTender No
JSBCCL/19/2024-25Tender Authority
State Building Construction Corporation Limited ViewPurchaser Address
-Website
http://jharkhandtenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Providing coarse clean local SAND IN FILLING in foundation trenches or in plinth including ramming and watering in layer not exceeding 150 mm thick with all leads and 1.5 M lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of Engineer In charge
94.03
-
-
... More
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm diameter holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floor.With Chlorpyriphos EC 20% with 1% concentration
557.6
-
-
... More
Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification & direction of E/I
101.86
-
-
... More
CONCRETE WORK
-
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size)
3.81
-
-
... More
Providing and laying in position cement concete of soecified grade excluding the cost of centering and shuttering - All work up tp plinth level 1:4:8 (1 cement :4 coarse sand (Zone -III) :8 graded stone aggregrate 40 mm normial size)
106.24
-
-
... More
R C C WORK
-
-
-
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
3.95
-
-
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix including pumping of concrete to site of layinh but excluding the cost of centering ,shuttering finishing and reinforcement including admixtures in recommended proportions as per IS : 9103 to accelerate rated srtting of concrete, improve workability without impaiting strenth and durability as per direction of engineer in charge (note :- Cement content considered in this item is 330 kg/cum excess/ less cement used as per design mix is payable/ recoverable seperataly ).
-
-
-
... More
All works uptp plinth level
483.3
-
-
... More
All works above plinth level upto floor V level
766.2
-
-
... More
Add for using extra cement in the items of design mix over and above the specified cement content therein.
874.65
-
-
... More
Centering and shutteing including struting, propping etc and removal of form for : Foundations, footings, bases for columns, etc for mass concrete
307.6
-
-
... More
Centering and shutteing including struting, propping etc and removal of form for : Walls ( any thickness) including attached pilasters, butteresses, plinth and string course etc
216.69
-
-
... More
Centering and shutteing including struting, propping etc and removal of form for : Suspended floors, roof , landings , balconies and access platform
2441.06
-
-
... More
Centering and shutteing including struting, propping etc and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers
1948.99
-
-
... More
Centering and shutteing including struting, propping etc and removal of form for : Columns, Pillars, Piers, abutments, Posts and struts
1157.34
-
-
... More
Providing Tor steel reinforcement of 8mm. dia. rods as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. (TMT Fe 500 (only vailid for TATA (TISCON), SAIL, JSPL, Electro steel Limited Bokaro and Vizal steel(RINL))
33.74
-
-
... More
Providing Tor steel reinforcement of 10mm./28 mm / 32mm dia. rods as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. (TMT Fe 500 (only vailid for TATA (TISCON), SAIL, JSPL, Electro steel Limited Bokaro and Vizal steel(RINL))
42.47
-
-
... More
Providing Tor steel reinforcement of 12mm. /16mm/20mm/25mm. dia. rods as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. (TMT Fe 500 (only vailid for TATA (TISCON), SAIL, JSPL, Electro steel Limited Bokaro and Vizal steel(RINL))
92.82
-
-
... More
BRICK WORK
-
-
-
... More
providing designation 75 B brickwork in C M ('1 :6 ) in foundation and Plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing. taxes and royalty all complete as per building specification and direction of E/l.
27.26
-
-
... More
Providing Designation 100A B/W with Fly Ash Lime Brick (FALB) conforming to IS 12894-1990 (9"x4.5"x3") in cement mortar (1:6) in Superstructure with clean coarse sand of F.M. 2 to 2.5 including 10mm thick mortar joints,cost of screening, raking out joints to 15 mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.
474.05
-
-
... More
Providing designation 112 mm thick reinforced designation 100 A brick work vuith fly ash lirne brick (FLAG)confirming to lS 12894-1990 (9"x4'5"x3" ) in C.M. ( 1 . 4 ) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, carriage of materials,n caffolding, raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specificationand direction of E/|.
1194.89
-
-
... More
Extra for providing & placing in position 2 no 6mm dia ms bar every 3rd corse of half brick masonary
1194.89
-
-
... More
WOOD WORK
-
-
-
... More
Supplying, fiiting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors windows skylights fanlights and C/W celetial window opening including wedge over all clamps complete including application of two coats of wood preservative of approved quility onthe surface buttling walls and lintels all complete as per building specification anddirection of E/I.
1.06
-
-
... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.9.127.2 1.0 mm thick
119.52
-
-
... More
Supplying fitting and fixing 35mm thick solid core type non-decorative single leaf flush shutter door and windows with black board core blended with high quality phenol formal clehydes synihetic resin both side commercial veneered of standard make with Aluminium fittings :such as hinges, tower bolts, hendle, cleats and sand blocks and laxes all conrplete as pe building specrfication and direction of E/l.
59.76
-
-
... More
Providing and fixing factory made single extruded WPC (Wood Polymer omposite) solid door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.Frame size 45 x 70 mm
179.6
-
-
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum
density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/ mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing
with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft
close clip on concealed hinges and necessary S.S screws shall be paid separately) 25 mm thick
62.4
-
-
... More
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete :
386.2
-
-
... More
Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete.
54
-
-
... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
54
-
-
... More
STEEL WORK
-
-
-
... More
Providing and fixing hand rail by welding etc. to steel ladder railings & staircases railing including applying a priming coat of approved steel primer
1267.2
-
-
... More
Supplying,frtting and fixing M.S. grill made of 20x6cmm M.S. flat as per approved design and drawing, properly fabrlcated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/1
1191.72
-
-
... More
Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3mm MS gusset plates at the junction and corners.all necessary fittings completejncluding applying a priming coat of approved steel primer. Using M.S. angle 40x40x6 mm for diagonal braces
4.2
-
-
... More
FLOORING WORK
-
-
-
... More
providing and laying, Doublecharge vitrified floor tiles in different sizes (thickness to be specified by lhe manufacturer) with water absorption less than 0.08% and conforming to lS 15622/ISO 13009 of approved make in all cotours and shades, laid on 20mm thick cement mortar 1 4 (1 cement:4 coarse sand) jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of tile 600x600 mm
1635.7
-
-
... More
Providing and fixing granite 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for flooring, kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 SQM
9.43
-
-
... More
Providing edge moulding to 18 mm thick marble/granite stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
9.43
-
-
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
13
-
-
... More
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.
176.1
-
-
... More
Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1 : 3) and jointed with grey cement slurry flush pointed with white cement including rubbing, polishing and cost of curing taxes, and royalty all complete as per building specificaton and directon and E/I.
469.23
-
-
... More
Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Udaipur green marble
763.53
-
-
... More
Green stone 20 -25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
161.57
-
-
... More
ROOFING & WATER PROOFING WORK
-
-
-
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
105.97
-
-
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
10
-
-
... More
Water proofrng for Old and New Roof Slab :- Providing and laying waterprooflng treatment on roof slab by applying two Component, factory a designed ready to use, acrylic modified flexible,material applied with brush, roller or spray for wate proof i n g coating as per manufactlrer specificatio With following steps :-
-
-
-
... More
(a)surface preparation :-Provrding and cleaning of concrete surface to remove dLrst, oil, grease including removal of existing loose paint / coating, and cement laitance by cleaning with compressed air & water jet including all materials, labour, tools complete. Ponding test to be done after plugging all outlets and to be checked from sofftt to identify seepage, leakage. On identiiication of seepage, cement grouting to be done with non shrink expanding admixture of Sika lndia Pvt.Ltd. / MYK Schomberg / Dr Fixit/Fosroc or equrivallent. Providing and reparing of all corners and joinis such as those betr,veen the parapet wall and the roof slab etc shall be chamfered with '150mm X '150 mm fillet of mortar (Cement: sand - 1:4) admixed with acrylic polymer of Sika/ Fosroc/MYK Schomberg/Dr Fixit or equivalent Before chamfering a prime coat shall be given with the sl u rry ?!gc!ylic polyrner Repai rin g su rface irreg ularities, damaged concretein base slab, dead cracks if any, with an acrylic polymer modilied repair moriar ir;cluding a coat of bonding agent of the same with ceme nt slurry rncluding all rnaterial, labour, tools complete.
-
-
-
... More
(b)1st Coat :- Apply 1st coat of two component acrylic modified, ready to use, llexrble cementitious material on surface saturated dry roof and inside wall of Parapet wall upto 600 mm by brush or roller. After 1st coat of application ,45 gsm oI Fibre glass cloth to lay when the first layer is still green. 1st coat should be applied @1.50 kg/SqmUcoat For the fJUrpose of n'ieasurernent tite entire treated surface will be measured."
-
-
-
... More
(c) :2nd Cr:ai :-T,: apply the 2nd coat of two component acrylic modified, reatiy to-use, flexible cementttious material right angle to the '1st coat over the glass fibre liad surface. 2nd coat should be applied @0.7 kgl Sqrnt/coat. For the pltrpose of measurement the entire treated surface will be rneasurecl." Alte r three days of drying the 2nd coat, therainwater ouilets to be plugged and ponding test to be done for 48 hours to rrjerrtify se epage, lealage from soffit and if found necessary rectification lo be plugged and ponding test to be done for 48 hours to identify seepage, leakage from soffit and if found necessary rectifcation to be done as per satrsfaction of E/C protected from damage before screed over it. Watqr proofing Brand:*Sika Topseal 109hi / Fosroc Brushbond RFX/ Dr Fixit Pidiffin 2Kl MYK Aqraiin TG Product Performance - Chemical Base Part A. Acrylic copolmer, Part B Specially graded cementitious powder - Density 1.6 l.rg/l (mixcd density) at +27oC Tensile Strength -2 lllmm2 after 28 clays (with Fibre cloth) (According to ASTM D 2370)Prillcut Bond Streric;tl-r '-2 I'J/mm2 (concrete lajlqry) (Aqgcrdlglq ISO 4624) Slant-Shear Bond Strength -4 N/mm2 (According to FIP 5.'15) Elongation at Break -35% without Fibre Cloth and 20% wilh Fibre Clot (Accordrng to ASTM D 2370)
-
-
-
... More
(d) Protection of treated surface with PCC- The treated surface should be covered with 25mm/50mm PCC of M-20 grade(1:1.5:3) with proper slope ( '1:120) towards tlre rain outlets in alternatepanels of 2 mt x 2mt keeping 6 mrn gap betuieen the panel joint. lntegralwater proofing admixture conforming to lS 2645 @ of 100 ml per bag of of cement to be added in the scree d concrete(pard separately for thts ltems).-All corners shall be charrmfered with 150mm X 150 mm fillet. The rainwater outlets shall be just leveled with the screed concrete to ensure smooth discharge of water - the peripheral gaps between pvc pipe outlet and concrete surface slrould be packed properly with rich concrete and the peripheral mouih to be sealed with moisture insensitive epoxy putty of Sika lndia Pvt.Ltd / IVIYK Schomberg / Dr FixiUFosroc .For the purpose ofrreasurement the entire treated surface will be measured."
-
-
-
... More
(e) Groove of PCC surface should be filled with Polysulphide Sealant (Paid Separately) Brand - Sika lndia Pvt Ltd / MYK Schomberg / Dr Fixit/Fosroc Warranty for Five years.
584.52
-
-
... More
Covering of treated surface wrth PCC :- Providing 50mm thick Cementn Concrete M20(1:'1.5:3) r'naintaining slope in alternate 2 mIx 2 mt panels with aaproved quality of stone chips of 20 mm to 6 mm size graded and clcaned sand of F M 2 5 io 3 including screening,shuttering,and mixing cerite nt concrete in mixer with admixture of integral water proofing and placing rn position,strikirrg cLrring,t-a]glgnd royality all complete as per buildirrg specifictionJand direction of E/l.Panels that has been left should be casteci nextday.-lhere should be 6 mm gap between Panels.Brand- Sika *Plastocrate plus,MYK proof WP10, Fosroc- Conplast X421ic , Dr Frx,t Prdiproof LWr
584.52
-
-
... More
Providing and mixing Liquid lntergral water proofing compound in Conctrete or plaster as per rnanufacturer specificatioqand as per cjirection of Eng - in Charge Brand- Sika Plastocrate plus, MYK proof WP 1 0, Fosroc-Cc.rnplast X4211 C, Dr fixit Pidiproof LW+ or Equivalent
71.37
-
-
... More
Providing and filling of 6 mm groove between 50mm PCC panels with 6 mm thick deep thermocol strip and filling the rest 25mm with polysulphide sealant (poring grade)as per drawing and technical specification and direction of E in charge (with 18 % GST ). Brand:- sika - polysulshide,fosroc- thioflex 600, dr fixit pidi seal PS (42P) ,MYK seal PS or euivalent.
584.52
-
-
... More
Toilet/Kitchen Water proofing:
-
-
-
... More
1) Surface preparation by grinding machine, cleaning , crack filling etc. complete
-
-
-
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :
-
-
-
... More
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.
-
-
-
... More
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry
211.32
-
-
... More
FINISHING WORK
-
-
-
... More
Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I.
82.76
-
-
... More
Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I.
4558.67
-
-
... More
Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I.
2115.92
-
-
... More
Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I.
82.76
-
-
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete
7781.99
-
-
... More
Providing 19 mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5with 5% cico or any other approved water proofing compoundincluding taxes and royalty all complete as per building specification and direction of E/l.
1107.4
-
-
... More
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
553.7
-
-
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
553.7
-
-
... More
Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper apllyingh putty whenever required scaffolding washing of floors and taxes all complete as per building specfication and direction Of E/I.
6674.59
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:
84.48
-
-
... More
ALUMINIUM WORK
-
-
-
... More
Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540- F & ISO 11600 Upto 10 mm depth and 10 mm width
487.8
-
-
... More
1-Sturcture Glazing
-
-
-
... More
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment.
3795.75
-
-
... More
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels including:
-
-
-
... More
Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:
-
-
-
... More
(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.
-
-
-
... More
(c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.
-
-
-
... More
(d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.
-
-
-
... More
(e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporatingprinciples of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge.
-
-
-
... More
Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this subhead. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. up to two decimal places
-
-
-
... More
Note:-2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately.
-
-
-
... More
The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NABL accredited lab or by any other accreditation body which operates in accordance with ISO / IEC 17011 and accredits labs as per ISO/ IEC 17025.
-
-
-
... More
(1). Performance Laboratory Test for Air Leakage Test (-50pa to - 300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr. (2) Static Water Penetration Test. (50pa to 1500p) as per ASTME- 331-09 testing method for a range up to 2000 ml. (3) Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method for a range upto 2000 ml. (4) Structural Performance Deflection and deformation by static air pressure test (1.5 times design wind pressure without any failure) as per ASTME-330-10 testing method for a range upto 50 mm. (5) Seismic Movement Test (upto 30 mm) as per AAMA 501.4- 09 testing method for Qualitative test, Tests to be conducted on site. (6) Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml
632.63
-
-
... More
Providing and fixing SGU 6mm Annealed glass in aluminium/uPVc windows, ventilators and partition etc. including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete.The Properties of glass should be as : Solar heat gain Cofficiant (HSGC) =0.50 and Visual Light Transmission (VLT) =50% or more and shade to be approved by EIC/Architect.
632.63
-
-
... More
Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer- in-Charge.
31.63
-
-
... More
MISCELLANEOUS WORK
-
-
-
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
105.94
-
-
... More
Supply, Installation & testing, Commissioning 16 Passenger Lift/ 1088Kgs / 1.25 Speed / 4 Floors / 4 Stops / Stainless Steel (1.5 Mm) Car Cabin
1
-
-
... More
CARRAIGE OF MATERIALS
-
-
-
... More
SAND (UPTO 10KM LEAD)
938.08
-
-
... More
CHIPS (UPTO 22KM LEAD)
1170.87
-
-
... More
BRICKS (UPTO 8KM LEAD)
263.83
-
-
... More
PLUMBING/SANITARY WORKS
-
-
-
... More
Providing and fixing male ended 15 mm dia brass bib cock of approved quality ( wt not less than 350 gms ) with extra socket all complete as per specification and direction of E/l .
24
-
-
... More
Providing and fixing 15 mm dia male ended C.I .Body brass spindle valve and seat bib cock of approved quality (wt not less than 400 gms ) with extra socket all complete as per specification and direction of E/l .
5
-
-
... More
Providing and fixing brass / C.I. Stop cock of approved quality all complete as per specification and direction of E/l .
-
-
-
... More
A) BRASS STOP COCK
-
-
-
... More
(a) 15 mm dia
3
-
-
... More
(b) 20 mm dia
3
-
-
... More
Providing and fixing 15 mm dia and 45 cm. long P. V .C connection pipe with heavy quality brass coupling at both ends etc. all complete as per specification and direction of E/l .
23
-
-
... More
Providing and fixing 15mm size C.P brass pillar cock (Weight not less than 350 gms) C.I body brass spindle pillar cock of approved quality as per spcification and direction of E/l. (b) C.I. body brass spindle
23
-
-
... More
Providing and fixing Gun metal full way valve of approved qualtiy, all complete as per specification and direction of E/l
-
-
-
... More
(a) 15 mm dia wt not less than 300 gms
2
-
-
... More
(b) 20mm dia wt not less than 400 gms
2
-
-
... More
(c) 25 mm dia wt not less than 500 gms
2
-
-
... More
(d) 32 mm dia wt not less than 700 gms
2
-
-
... More
(e) 40 mm dia wt not less than 1kg
2
-
-
... More
(f) 50 mm dia wt not less than 1.5 kg
2
-
-
... More
Cutting drain width wise above G.L for laying G.I pipes and restoring with brick in cement mortar (1:4) 12mm cement plaster in (1:4) with neat cement punning as per specification and direction of E/l
115
-
-
... More
Cutting chajja or cornice for laying G.I pipe and restoring the same with R.C.C (1:2:4) brick work in cement mortar (1:4) and cement plaster (1:4) as per specification and direction of E/l.
2
-
-
... More
Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/l. (a) Mirrors of 6 mm thick plate glass bevelled edge mirror including C.P brass revolving fittings, 3 mm plywood board and C P hinges to fix with mirror
-
-
-
... More
(1)600x450 mm size
23
-
-
... More
(2) C.P brass liquid shop container
23
-
-
... More
Supplying, fitting and fixing 40 mm high viterous white glazed earthen ware E.W.C. with "p" trap of Parry Hindustan or any other I.S.S. make including supplying & fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450 grms. , 15 mm P.V.C. alkathene pipe 45 cm long with brass coupling at both ends and white/ black plastic solid state seal and lead of commander/ cuckoo or other I.S.S. make with hinges or screw etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l.
-
-
-
... More
(B) 510 mm long
-
-
-
... More
(a)12.5 lit. low level P.V.C. cistern
24
-
-
... More
Making holes in wall for laying H.C.I, pipe and restoring the same after pipe laying as per specification and direction of E/l. (i) 125 mm dia
6
-
-
... More
Supplying Submersible pump sets confirming to IS 8034 and motor cvonfirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft ant polypropylene/ norylimpeller. Motor suitable for working on 415 V+10%, 3PH, 50 HZ, AC supply with cable guard, thurst carbon/ fibre bearing to withstand entire hydraulic thrust, water proof winding shall be provided. The pump ste shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined no return valve shall be provided with pump. 3 m submersible copper conductor cable in single/ double run shall be provided with each pump. Submersible pump set 50mm dia (with polypropylene/ Noryl Impeller) up to 20 stages 3 HP
1
-
-
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm
2
-
-
... More
Providing and fixing toilet paper holder : C.P. brass
24
-
-
... More
Providing and fixing PTMT Bottle Trap for Wash basin and sink.
-
-
-
... More
Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms
27
-
-
... More
Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms
2
-
-
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe
-
-
-
... More
32 mm dia
27
-
-
... More
40 mm dia
2
-
-
... More
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
4
-
-
... More
Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes confirming to IS : 13592 Type A including jointing with seal ring confirming to IS : 5382 leaving 10mm gap for thermal expansion. 110mm dia
112.47
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised - Rigid PVC rain water pipes confirming to IS : 13592 Type A including jointing with seal ring confirming to IS : 5382 leaving 10mm gap for thermal expansion.
-
-
-
... More
Coupler 110 mm dia
5
-
-
... More
Single Tee with door 110x110x110 mm
5
-
-
... More
Bend 87.5 deg 110 mm
6
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised - Rigid PVC rain water pipes confirming to IS : 13592 Type A including jointing with seal ring confirming to IS : 5382 leaving 10mm gap for thermal expansion. Shoe (Plain) 110 mm Shoe
5
-
-
... More
Providing and fixing unplasticised- PVC pipe clip of approved desing to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwes with M.S. Screw of required length including cutting brick work and fixing in cement mortar 1:4 ( 1 Cement : 4 Coarse sand ) and making good the wall etc. complete. 110mm dia
37
-
-
... More
Providing and fixing white vitreous china battery based infrared sensor operated urinal of appx.size 610x390x370mm having pre & post flushing with water (250ml & 500ml consumption) having water inlet from back side,including fixing to wall with suitable brackets all as per manufacturers specification & direction of Engineer-in charge.
8
-
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 65 mm nominal bore
2
-
-
... More
Providing and fixing C.P. bass angle valve of approved quality conforming to I.S:8931. 15 mm nominal bore
59
-
-
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15cm diameter and weighting not less than 440 grams.
4
-
-
... More
Excavating trenches of required width for pipe, cables etc including excavation for sockets ,& dressing of sides ,ramming of bottoms ,depth upto 1.5m including getting out the excavated soil,& then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming ,watering, etc and disposing of surplus excavated soil as directed, within lead of 50m. All kinds of soil
50
-
-
... More
Providing and fixing wash basin with CI brackets,15mm brass pillar taps,32mm CP brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever required. White vitreous china wash basin size 630 mm x 450 mm with a single 15mm CP brass pillar tap.
23
-
-
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
4
-
-
... More
Providing and fixing G.I. pipes conforming to I:S including all fittings, testing, cutting holes or chases and making good where required. (For waste connections) 32mm dia
115
-
-
... More
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : 32mm dia
115
-
-
... More
Providing and fixing PTMT grating of approved quality and colour. Circular type 100 mm nominal dia
44
-
-
... More
Rectangular type with openable circular lid 150 mm nominal size square 100 mm diameter of the inner hinged round grating
10
-
-
... More
Providing fixing, testing and commissioning in position SWR PVC PIPE TYPE-B pipe comforming to IS:13592 including all fittings such as bends, junctions, inspection doors, offests, cowl, access pieces/clean out plugs, clamps /supports/ hangers etc. jointing with PVC Adhesive joints including cutting holes in walls, core cutting in slabs and making good the same. all complete as per specification and direction of E/l.
-
-
-
... More
(a) 150 mm dia
50
-
-
... More
(c) 100 mm dia
44
-
-
... More
(d) 75 mm dia
10
-
-
... More
(e) 50 mm dia
57.5
-
-
... More
Providing & fixing in position uPVC P"or S" trap of self cleaning design of following sizes for the embedded areas. Making proper connection with drip-seal joints, cutting chase / hole in floors /slabs and bringing the same in proper condition in cement concrete 1:2:4 mix complete as required. including cost of cutting and making good the walls and floors where required.
-
-
-
... More
3 x 50 mm inlet and 100 mm outlet (Multi Floor Trap)
32
-
-
... More
50 mm outlet (Floor Drain)
8
-
-
... More
Fixing of Wall Mounted C.P. Brass Single lever Sink Mixer with swinging spout of required size including cuttinig and making good the wall wherever required. (Make: Jaquar Sink Mixer CQT-23309 or equivalent)
2
-
-
... More
Providing & fixing C.P. hand spray with lever control (health faucet) and flexible hose 1 m long connection with C.P. holder for hand spray complete in all respects as per direction of Engineer-Incharge. (Make: Jaquar, Hand Shower (Health Faucet) ALD-CHR-573 or equivalent )
24
-
-
... More
Providing & fixing chinaware urinal partition of 160X 400X 825 mm with fixed with expandable anchor fasteners with C.P. brass bolts and washers, embedded in wall with anchor and set in cement concrete complete including cutting and making good the walls wherever required (Make: Parryware, white C0507 Large or equivalent)
8
-
-
... More
Providing and Fixing in position Hindware make or equivalent CP Grab Bar with wall flanges 600 mm to wooden cleats with C.P. brass screws complete in all respects.
4
-
-
... More
Providing and fixing C.P. brass twin coat hooks fixed on toilet door with including CP brass screws, washers rawl plugh etc. complete in all respact. (Make: Jaquar, ACN-SSF-1161N or equivalent)
24
-
-
... More
Supplying and fixing 100 mm dia SWR PVC End Cap (Clean Outlet Plug) fittings of approved make. all complete as per specification and direction of E/l.
26
-
-
... More
Providing & fixing horizontal centrifugal pumps for domestic water lifting with CI casing bronze impeller suitable for operation on 400 / 440 V pH 50 cycle A/C power supply.Cost shall include electrical control panel (star/dol starter) with all controls to make the pumps to operate automaticaly.Sequencing shall be provided for the pumps.Pumps shall start /stop automatically depanding upon water level in overhead tank. Domestic Water Supply transfer pump at ground level , Capacity 1.5 LPS, Head - 40 M., HP -2.5 HP Approxi.
1
-
-
... More
Constructing water tight brick masonry grease trap with first class bricks in cement mortar 1:6 (1 cement :6 coarse sand), R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size, foundation concrete 150 mm thick 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement & M.S. foot rests including fixing in 20 x 20 x 10 cm cement concrete blocks 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 20 mm nominal size), two brick masonry baffle walls each of 500 mm depth deep each of 115 mm thickness, 2 Nos C.I. double seal medium duty covers each of 450 x 450 mm size including excavation, backfilling & disposal of surplus earth with a lead upto 50m complete as per standard design. (Note: Cost shall include dewatering & water proofing of Grease trap as directed at site). Grease Trap (Size 1200 x 900 x 1000 mm overall depth).
1
-
-
... More
Providing and fixing G.I. Vent Pipe class 'B' (medium duty) for R.C.C water storage tanks comprising of 600 mm long vertical pipe, return bend with mosquito grating & cast brass perforated coupling including all associated civil work. 100 mm dia
4
-
-
... More
Providing and fixing of mosquito overflow grating /Jali of the following diameters including all fitings & accessories :- 100 mm dia
4
-
-
... More
Providing, fixing, joints and testing in position the following UPVC Pipe confirming to IS:4985 of 6kg/sqcm for garden irrigation system cut to required length pipe to be laid below level in trenches up to required depth, including excavation in all kind of soil (hard rock) dewatering, refilling, watering, ramming and removing the surplus excavated material and putting 100 m sand all-around and making good the same.
-
-
-
... More
25mm dia
17.25
-
-
... More
80mm dia
57.5
-
-
... More
Providing & fixing in position 25 mm dia lawn hydrants consisting of 25 mm dia Ball valve, GI nipple and threaded hose receiver complete as required.
10
-
-
... More
WATER SUPPLY
-
-
-
... More
Excavating trenches of required width for pipes including excavation for sockets also including for cement concrete craddles, and dressing of sides, ramming of bottoms, depth up to 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer with minimum 95% by ramming, watering etc. and disposing off surplus excavated soil as directed, within a lead of 50 m. UPTO 1.5M Pipes, cables etc, not exceeding 80 mm dia.
50
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all (CPVC) plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge.
-
-
-
... More
Internal Work - Exposed on Wall
-
-
-
... More
15 mm nominal outer dia pipes.
27.6
-
-
... More
20 mm nominal outer dia pipes.
49.68
-
-
... More
25 mm nominal outer dia pipes.
41.4
-
-
... More
32 mm nominal outer dia pipes.
36.8
-
-
... More
Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This including jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the the same including testing of joints complete as per direction of engineer in charge.
-
-
-
... More
Concealed work including cutting chases and making good the walls etc.
-
-
-
... More
15 mm nominal outer dia pipes.
96.6
-
-
... More
20 mm nominal outer dia pipes.
80.5
-
-
... More
25 mm nominal outer dia pipes.
55.2
-
-
... More
32 mm nominal outer dia pipes.
27.6
-
-
... More
Fixing water meter and stop cock in G.I pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately).
1
-
-
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. [Location : From Bore Well/Tanker water supply line/Municipal line to Underground Water Storage Tank]. 80 mm dia
115
-
-
... More
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size),i/c necessary excavation foundation concrete 1:5:10 (1 Cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 Cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design: a) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
-
-
-
... More
(i) Domestic tank
10000
-
-
... More
(i) Fire tank
10000
-
-
... More
Providing and fixing C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 grams with threaded end for hose connection.
21
-
-
... More
Providing and fixing gun metal non- return valve of approved quality (screwed end).
-
-
-
... More
50 mm dia nominal bore-vertical
2
-
-
... More
65 mm dia nominal bore-vertical
2
-
-
... More
80 mm dia nominal bore-vertical
1
-
-
... More
Supplying and fixing C.I. cover without frame for manholes: 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg.
6
-
-
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 50 to 80 mm nominal bore
1
-
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
... More
25 mm nominal bore
6
-
-
... More
20 mm nominal bore
4
-
-
... More
32 mm nominal bore.
4
-
-
... More
40 mm nominal bore
2
-
-
... More
50 mm nominal bore
2
-
-
... More
65 mm nominal bore
2
-
-
... More
80 mm nominal bore
1
-
-
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete
-
-
-
... More
15 mm nominal bore
2
-
-
... More
20 mm nominal bore
4
-
-
... More
25 mm nominal bore
4
-
-
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :
-
-
-
... More
20 mm nominal bore
6
-
-
... More
25 mm nominal bore
6
-
-
... More
32 mm nominal bore.
6
-
-
... More
40 mm nominal bore
4
-
-
... More
50 mm nominal bore
4
-
-
... More
65 mm nominal bore
4
-
-
... More
RAIN WATER HARVESTING
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge All kinds of soil
10
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
10
-
-
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. All types of soil 300 mm dia
120
-
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 200 mm nominal size dia
100
-
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size dia
100
-
-
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge
10
-
-
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
10
-
-
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge.
10
-
-
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
10
-
-
... More
Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineerin-charge.
10
-
-
... More
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
10
-
-
... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200 mm dia
2
-
-
... More
Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 200 mm dia
2
-
-
... More
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 200 mm dia
2
-
-
... More
EXTERNAL PLUMBING
-
-
-
... More
Excavating trenches of required width for pipe, cables etc including excavation for sockets ,& dressing of sides ,ramming of bottoms ,depth upto 1.5m including getting out the excavated soil,& then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming ,watering, etc and disposing of surplus excavated soil as directed, within lead of 50m.
-
-
-
... More
All kinds of soil Pipes, cables etc. exceeding 80 mm dia. But not exceeding 300 mm dia
195.5
-
-
... More
Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand) including testing of joints etc. complete.
-
-
-
... More
150 mm. dia. RCC Pipes
57.5
-
-
... More
250 mm. dia. RCC Pipes
115
-
-
... More
300 mm. dia. RCC Pipes
23
-
-
... More
Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth upto 1.5 metre).
9.78
-
-
... More
Construction brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand 4 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design.
-
-
-
... More
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
8
-
-
... More
Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg weight of cover 58 kg and weight of frame 58 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
-
... More
Extra for depth for manholes Size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1.6
-
-
... More
Size 120x90 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
0.4
-
-
... More
Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :
-
-
-
... More
0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) :
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
10
-
-
... More
Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91 m to 1.67 m With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
-
... More
Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :
-
-
-
... More
1.68 m deep with SFRC Cover and frame (heavy duty HD 20 grade designation) 560 mm internal diameter conform ing to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 ce ment : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) :
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
-
... More
Extra depth for circular type manhole 1.22 m internal dia (at bottom) beyond 1.68 m to 2.29 m : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
... More
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
66
-
-
... More
Providing and fixing square mouth SW gully trap class SP-1 complete CI grating brick masonry chamber and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.7 kg. as per standard design. 100x100mm size P type With common burnt clay F.P.S (non modular) bricks of class designation 7.5.
1
-
-
... More
Constructing brick masonry road gully chamber 50 X 45 X 60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500 X 450 mm precast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S (non modular) bricks of class designation 7.5.
1
-
-
... More
Boring/drilling bore well of required dia for casing / strainer pipe, by suitable method prescribed in IS:2800 (part-1) including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer-in-charge, upto 90 metre depth below ground level. All types of soil 300mm dia
100
-
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS : 12818, including hire & labour charges, fittings & accessories etc, all complete, for all depths, as per direction of engineer-in-charge. 100mm nominal size dia
120
-
-
... More
Supplying & filling, sepreading & leveling stone boulders of size range 5cm to 20cm, in the recharge pit, in the required thickness, for all leads & lifts, all complete, for all depths, as per direction of engineer-in-charge.
10
-
-
... More
Supplying & filling, sepreading & leveling gravels of size range 5mm to 10mm, in the recharge pit, over the existing layer of boulders, in the required thickness, for all leads & lifts, all complete, as per direction of engineer-in-charge.
10
-
-
... More
Supplying & filling, sepreading & leveling coarse sand of size range 1.5mm to 20mm, in the recharge pit, in the required thickness over gravel layer, for all leads & lifts, all complete, as per direction of engineer-in-charge.
10
-
-
... More
Providing and fixing Bail plug / Bottom plub of required dia to the bottom of pipe assembly of tubewell as per IS : 2800 (part -1) 100mm dia
4
-
-
... More
Providing and fixing in position pre-cast RCC manhole cover and frame of required shape & approved quality EHD-35 Circular shape 560 mm internal dia
4
-
-
... More
Constructing masonry Chamber (for lawn hydrant) 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
10
-
-
... More
FIRE FIGHTING WORK
-
-
-
... More
Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)
-
-
-
... More
Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520
-
-
-
... More
Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure,horiziontal foot mounted type with Class-'F' insulation,conforming to IS-325.
-
-
-
... More
M.S.fabricated common base plate, coupling, couplingguard, foundation bolts etc.as required.
-
-
-
... More
Suitable cement concrete foundation duly plasteredand with anti vibration pads.
-
-
-
... More
900 lpm at 35 m Head
1
-
-
... More
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.
1
-
-
... More
HYDRANTS SYSTEM
-
-
-
... More
Supplying and fixing Single Headed Internal Hydrant Valve oblique pattern with instantaneous Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked, conforming to IS : 5290 (Type A), with 80 mm dia flanged inlet, with ABS cap and chain complete with all accessories etc. as required.
4
-
-
... More
Supply, Installation, Testing and Commissioning of 63 mm dia. 15 Mtr. Long RRL hose pipe with 63 mm dia. male and female stainless steel couplings duly binded with GI wire rivets etc. ISI marked, IS 636 (type-A) as required.
8
-
-
... More
Supplying and fixing 63 mm dia. Stainless Steel branch pipe with 20mm dia nozzle conforming to IS:903. suitable for instantaneous connections to hose pipe coupling etc. as required.
4
-
-
... More
Supplying and Fixing First Aid Hose Reel, wall mounting swinging type complete with drum & bracket of MS construction, spray painted in Post office Red, confirming to IS 884/1995 with upto date amendments, complete with the following as required.
-
-
-
... More
30 Meter long 20 mm dia water hose Thermoplastic (Textile reinforced) Type - 2 as per IS : 12585
-
-
-
... More
20 mm dia. ball valve & nozzle.
-
-
-
... More
Drum and brackets for fixing the equipments on wall.
-
-
-
... More
Connection from riser with 25 mm dia (Gun metal) stop valve & M.S. Pipe.
4
-
-
... More
Supplying, installation, testing and commissioning of weather proof M.S cabinet size 1200 mm x 2100 mm x 600mm deep fabricated from 1.6mm thick M.S. sheets and M.S angle 40mmx40mmx6mm complete with glass, locking arrangements to accommodate the following.
-
-
-
... More
Gunmetal single headed Hydrant valve - 1 No.
-
-
-
... More
Fire Hoses 63mm, 15 M long with accessories - 2 Nos.
-
-
-
... More
Short branch - 1 No.
-
-
-
... More
First Aid hose Reel - 1 No.
-
-
-
... More
Fire Extinguisher - 2 Nos.
-
-
-
... More
Fireman's Axe - 1 No.
-
-
-
... More
Pressure Gauge - 1 No.
-
-
-
... More
The cabinet shall be painted with one coat of primer and 2 coats of synthetic enamel paint of approved shade.
4
-
-
... More
PIPING, VALVES AND ACCESSORIES
-
-
-
... More
Supplying, laying, fixing, testing and commissioning of following sizes (NB) of class 'C' M.S. pipes confirming to IS 1239 and 3589 including cutting, threading, welding etc. and providing all fittings e.g. elbows, reducers, clamps, hangers, flanges, gaskets, nuts, bolts and washers etc. including painting of pipes and fittings with red paint over a coat of ready mixed primer, both of approved quality and shade including cutting holes and chases in brick or RCC walls/slabs and making good the same etc. complete in all respect as required. (The Welding shall not be done for piping less than 50 mm dia.)
-
-
-
... More
150 mm dia
37
-
-
... More
100 mm dia
37
-
-
... More
80 mm dia
28
-
-
... More
25 mm dia
5
-
-
... More
Supplying and fixing Orifice Plate made of 6 mm thick, stainless steel with orifice of required size in between flange & landing valve of external and internal hydrant to reduce pressure to working pressure of 3.5 Kg / cm2 complete as per specifications as required.
4
-
-
... More
Supplying and fixing of Fire Man's axe with heavy insulated rubber as per standard conforming to IS 926.
4
-
-
... More
FIRE EXTINGUISHERS
-
-
-
... More
Providing and fixing Powder Fire Extinguisher (Stored Pressure type) Capacity 09 Kg duly ISI marked conforming to IS: 15683:2006, with IS 14609, ISI marked ABC powder complete with squeeze grip release valve, discharge pipe locking arrangement, pressure gauge, operation manual and bracket. Operating Temperature: - 10ºC to + 55ºC. Brand LIFEGUARD
8
-
-
... More
Providing and fixing fire extinguisher of carbon dioxide type consisting of brand new high pressure steel cylinder bearing IS: 7285 mark and having the approval of controller of explosives Nagpur, wheel type valve bearing IS:3224 mark internal discharge tube, 1 meter long high pressure discharge hose, non conducting horn, suspension bracket, fully charged bearing IS: making fixed to wall as directed conforming IS : 15683:2006 4.5kg capacity cylinder
8
-
-
... More
MOTOR CONTROL PANELS
-
-
-
... More
Fully automatic DOL starter suitable for 5.0 HP motor including 40 A TP MCCB 'C' series, CT's, Ammeter, Push Button, Indicators, Auto/Manual/OFF switch, SPPR, Relay, metering & indication etc. - (1w+1s) 1 Nos coloured LED type ON indication
1
-
-
... More
ELECTRICAL WORK
-
-
-
... More
LT CABLES
-
-
-
... More
Supplying of following 1100 volt grade XLPE insulated PVC sheathed aluminium / Copper conductor armoured cables as per specification as required. PVC/ XLPE insulated PVC sheathed heavy duty, armoured electrical cables with Aluminium conductor for working voltage upto and including 1100volts ( conforms to IS:1554, Part-1)
-
-
-
... More
3.1/2 core 70sq. mm.
45
-
-
... More
3.1/2 core 50sq. mm.
45
-
-
... More
3.1/2 core 35sq. mm.
45
-
-
... More
3.5 core 25sq. mm.
80
-
-
... More
4 core 16sq. mm.
125
-
-
... More
4 core 10 sq. mm.
80
-
-
... More
Laying and fxing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall/cable tray surface as required.
-
-
-
... More
Upto 35 sq. mm
330
-
-
... More
Above 35 sq. mm and upto 95 sq. mm
45
-
-
... More
Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.
-
-
-
... More
Upto 35 sq. mm
80
-
-
... More
Above 35 sq. mm and upto 95 sq. mm
45
-
-
... More
Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size cables in the existing RCC/ HUME/ Stoneware/ Metal pipe as required
-
-
-
... More
Upto 35 sq. mm
20
-
-
... More
Above 35 sq. mm and upto 95 sq. mm
50
-
-
... More
Supplying and making end termination of following sizes with brass compression gland including providing and crimping solderless plugs/ferrules of sizes PVC insulated PVC sheathed aluminum conductor armoured cable 1.1 KV grade.
-
-
-
... More
3.1/2 core 70sq. mm.
2
-
-
... More
3.1/2 core 50sq. mm.
2
-
-
... More
3.1/2 core 35sq. mm.
2
-
-
... More
4 core 25sq. mm.
6
-
-
... More
4core 16sq. mm.
8
-
-
... More
4 core 10sq. mm.
8
-
-
... More
Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required. (Powder coated shall be of Siemens Grey Colour- RAL 7032)
-
-
-
... More
100mm width X 50mm depth X 1.6 mm thickness
45
-
-
... More
150mm width X 50mm depth X 1.6 mm thickness
45
-
-
... More
300mm width X 50mm depth X 1.6 mm thickness
45
-
-
... More
415V LT PANELS & DISTRIBUTION BOARDS
-
-
-
... More
STUDENT RESOURCE CENTRE MDB
-
-
-
... More
1 No.315 Amps 4 Pole MCCB and ON/OFF/Trip & shunt trip coil.
-
-
-
... More
Digital energy meter (conzerve – EM 6400NG with RS-485 or equivalent) of accuracy class-I, with 3 Nos. 300/5 amps 15VA CTs.
-
-
-
... More
Phase indicating light shall be protected by suitable rating MCB’s.- 3 Sets
-
-
-
... More
Breaker ON / OFF / TRIP indicating lights with control MCB’s. - 1 Set
-
-
-
... More
Bus Bars
-
-
-
... More
500 amps TPN Aluminium bus bars with colour coded heat shrinkable insulating sleeves - 1 Set.
-
-
-
... More
Outgoing
-
-
-
... More
9No.63/100/125Amps TPN MCCB and ON/OFF/Trip & shunt trip coil.
-
-
-
... More
2No160Amps TPN MCCB and ON/OFF/Trip & shunt trip coil.
-
-
-
... More
Panel as described above.
1
-
-
... More
Lift Panel - 1
-
-
-
... More
Incoming
-
-
-
... More
1 No. 100 Amps with 4 Pole MCCB with 125A ATS and ON/OFF/Trip.
-
-
-
... More
Digital energy meter (conzerve – EM 6400NG with RS-485 or equivalent) of accuracy class-I, with 3 Nos. 100/5 amps 15VA CTs.
-
-
-
... More
Phase indicating light shall be protected by suitable rating MCB’s.- 3 Sets
-
-
-
... More
Breaker ON / OFF / TRIP indicating lights with control MCB’s. - 1 Set
-
-
-
... More
Bus Bars
-
-
-
... More
300 amps TPN Aluminium bus bars with colour coded heat shrinkable insulating sleeves - 1 Set.
-
-
-
... More
Outgoing
-
-
-
... More
2 No. 40/63 Amps 4 Pole MCCB and ON/OFF/Trip
-
-
-
... More
2 No. 32/25 Amps FP Pole MCB.
-
-
-
... More
Panel as described above.
1
-
-
... More
EXTERNAL LIGHTING FEEDER PILLAR OUT DOOR TYPE
-
-
-
... More
INCOMER
-
-
-
... More
1 Nos. 63/100Amp 16KA 4P MCCB complete having microprocessor based over current, short circuit & earth fault protection incomer shall be complete with following.
-
-
-
... More
1 Nos. 60Amp AC3 4P Contactor with timer be complete as required.
-
-
-
... More
METERING FOR EACH INCOMER
-
-
-
... More
Square flush mounting 0-60Amp ammeter with 3 way and OFF selector switch.
-
-
-
... More
3 Nos. Cast resin current transformers of Class 1.0 for metering.
-
-
-
... More
Three phase indicating lamps (LED type) with MCB.
-
-
-
... More
ON OFF TRIP indicating lamps (LED type).
-
-
-
... More
Square flush mounting voltmeter 0-500 volt with 3 way and OFF selector switch.
-
-
-
... More
BUSBAR
-
-
-
... More
1 Set of 100A, TPN Aluminum bus bars with colour coded sleeves.
-
-
-
... More
OUTGOING UNITS
-
-
-
... More
10 Nos. 6/32Amp TPN MCB 10KA
-
-
-
... More
EXTERNAL LIGHTING FEEDER PILLAR AS DESCRIBED ABOVE
1
-
-
... More
EARTHING & LIGHTING PROTECTION
-
-
-
... More
Earthing with G.I. Earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. ( with charcoal or coke and salt).
2
-
-
... More
Earthing with Copper Earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. ( with charcoal or coke and salt).
2
-
-
... More
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including solding etc. as required.
50
-
-
... More
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
100
-
-
... More
S/L 25x6mm G.I. earth strip in ground: Proving and laying earth connection from earth electrode with 25x6mm G.I wire in 15mm GI pipe from electrode as required.
50
-
-
... More
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
50
-
-
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
50
-
-
... More
Providing and fixing 32 mm X 6 mm G.I. strip on surface or in recess for connections etc. as required.
50
-
-
... More
CU WIRE CONDUCTORS
-
-
-
... More
Providing and laying following size CU insulated wire on surface or in recess in exising conduit/ cable tray for connections etc. as required.
-
-
-
... More
6sqmm ISI marked, FRLS PVC insulated, 1 core copper conductor
20
-
-
... More
10sqmm ISI marked, FRLS PVC insulated, 1 core copper conductor
20
-
-
... More
16sqmm ISI marked, FRLS PVC insulated, 1 core copper conductor
20
-
-
... More
LIGHTNING PROTECTION
-
-
-
... More
Prividing and Fixing of GI lightning conductor Finial made of 25mm dia 300 mm Long GI tube , having single prone on top with 85mm dia 6mm thick GI base plate including holes etc complete as required
4
-
-
... More
Providing and fixing GI-tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor as required.(for vertical run)
200
-
-
... More
Providing and fixing GI-tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor as required.(for horizontal)
300
-
-
... More
Providing and fixing testing joint, made of 20 mm x 3 mm thick gi strip, 125 mm long with 4 Nos. brass bolts, nuts check nuts and spring washers etc. complete as required.
8
-
-
... More
Providing and laying GI tape, 32 mm x 6 mm thick from earth electrode directly in ground as required.
50
-
-
... More
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
8
-
-
... More
SUPPLY AND INSTALLATION OF LIGHT FIXTURES AND EXHAUST FANS
-
-
-
... More
SITC of following ratings RECCESS /SURFACE MOUNTED LED ROUND / SQUIRE SHAPE DOWN LIGHT liminiaire with pressure dia cast housing FOR SINLE PHASE supply voltage luminaire shall be confirm to IS 10322 Part 3 section 2 or IEC 6-7 22 with all necessary accessory item required .
-
-
-
... More
12 W LED ROUND DOWNLIGHT
25
-
-
... More
15/16w LED RECESSED ROUND DOWNLIGHT
100
-
-
... More
50/60w LED FLOOD LIGHT D.HIGHT AREA
2
-
-
... More
2'x2' LED PANEL LIGHT
90
-
-
... More
6w LED SURFACE BULK HEAD LIGHT
20
-
-
... More
36w LED RECESSED 1200MM LIGHT
8
-
-
... More
SITC of following ratings SURFACE MOUNTED LED tube light fitting, suitable for 230V 50Hz, single phase supply etc. complete as required.
-
-
-
... More
10/12W LED Tube light
5
-
-
... More
20/22W LED Tube light
5
-
-
... More
Supply of LED Mirror Light with power 8/10W rated voltage 230V 50 Hz aluminium/ PC body with rauuning life minimum 30000 Hours
12
-
-
... More
Supply insttalation , testing and commisioning of following size ceiling fan 3 balde confirming to IS : 374:2019 incuding wiring thedown roads of standed lenth ( upto 30 cm ) with 1.5 sqmm PR PVC, insulated copper wire suitable for 230V 50Hz single phase supply etc. compleyte as required. 1200mm (48 Degree) BLDC 5 star rating 32W ceiling fan
55
-
-
... More
Supply and fixing of step type electronic fan regulator on existing modular plate switch box including connection but excluding modular plate etc as required.
55
-
-
... More
Installation, testing and commissioning of ceiling fans/bracket fan of all sizes including wiring the down rod .of standard length (up to 30 cm ) with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc as required.
55
-
-
... More
Supply of 12" (300mm) metal exhaust fan
15
-
-
... More
Supply of 16" (400mm) metal exhaust fan
2
-
-
... More
TELEPHONE, TV , DATA cabling with Raceways :
-
-
-
... More
Supply & fixing of modular telephone cord outlet & switch box including connections but excluding modular plate etc. as required.
10
-
-
... More
Supply & fixing of 1 or 2 module GI box along with modular base & cover plate of modular switches in recess etc. as required.
10
-
-
... More
Supply & fixing of modular TV antenna socket outlet & switch box including connections but excluding modular plate etc. as required.
4
-
-
... More
Supply & fixing of 1 or 2 module GI box along with modular base & cover plate of modular switches in recess etc. as required.
4
-
-
... More
Supplying and fixing of following size PVC conduit alongwith the accessories in surface / recess including painting in case of surface conduit or cutting and making good the same in case of recessed conduit as required as per specification.
-
-
-
... More
20mm dia
250
-
-
... More
25mm dia
1200
-
-
... More
32mm dia
150
-
-
... More
Supply and fixing 1 or 2 module ( 75mm X 75mm ) GI Box along with modular base and cover plate for modular switches in recess etc as required
28
-
-
... More
Supply and fixing of Computer terminal (RJ-45) outlet in existing box with modular plate
40
-
-
... More
Supply and fixing of Outdoor type junction Box
10
-
-
... More
Supply and Laying of Cat-6 Cable in existing conduits
1000
-
-
... More
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm copper conductor PE insulated, with PVC shield in the existing surface/ recessed PVC conduit as required.
150
-
-
... More
Supplying, drawing, of 0.5mm dia (2 pair) FR PVC insulated copper conductor , unarmoured telephone cable in existing surface/ recessed PVC conduit as required
100
-
-
... More
Supplying, drawing, of 0.5mm dia (4 pair) FR PVC insulated copper conductor , unarmoured telephone cable in existing surface/ recessed PVC conduit as required
150
-
-
... More
Supplying and Fixing in floor with all accessories , 2 mm thick steel sheet factory fabricated post galvanized floor recessed raceway of the following sizes
-
-
-
... More
225 mm wide x 38 mm deep raceway
40
-
-
... More
100 mm wide x 38 mm deep raceway
40
-
-
... More
50 mm wide x 38 mm deep raceway
110
-
-
... More
Providing and fixing 400 x 400 x 50 mm deep 2 mm thick GI sheet junction box including providing 3 mm thick stainless steel cover as required
5
-
-
... More
Providing and fixing 300 x 300 x 50 mm deep 2 mm thick GI sheet junction box including providing 3 mm thick stainless steel cover as required
5
-
-
... More
Providing and fixing 150 x 150 x 50 mm deep 1.6 mm thick GI sheet junction box including providing 3 mm thick stainless steel cover as required
5
-
-
... More
FIRE ALARM AND DETECTION SYSTEMS
-
-
-
... More
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same
in case of recessed conduit as required.
-
-
-
... More
20mm dia
200
-
-
... More
25mm dia
600
-
-
... More
Supplying and laying of following sizes FR PVC insulated single core copper wire in existing conduit complete as required.
-
-
-
... More
2x1.5 sq mm
1100
-
-
... More
2x2.5 sq mm
100
-
-
... More
Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log andfacility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications.
-
-
-
... More
Two Loop Panel
1
-
-
... More
Supplying, installation, testing & commissioning of central graphical fire alarm management system to centrally monitor and operate the fire alarm system complete as required.
1
-
-
... More
Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required.
2
-
-
... More
Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.
55
-
-
... More
Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required.
20
-
-
... More
Supplying, installation, testing & commisssioning of intelligent addressable programmable sounder complete as required.
20
-
-
... More
Supplying, installation, testing & commissioning of fault isolator complete with base as required.
2.75
-
-
... More
Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required.
1
-
-
... More
Supplying, installation, testing & commissioning of addressable fire control module complete as required.
3
-
-
... More
Supplying, installation, testing & commissioning of addressable manual call point complete as required.
20
-
-
... More
Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.
20
-
-
... More
PA SYSTEM
-
-
-
... More
Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required..
1
-
-
... More
Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required.
35
-
-
... More
Supplying, installing, testing and commissioning of 2X1.0 SQMM IND. 1.1KV SPEAKER CABLE in existing conduit.
500
-
-
... More
Supplying, installation, testing & commissioning of ceiling/wall mounted loud speaker, 3/1.5 Watt in ABS enclosure complete as required.
5
-
-
... More
Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms operating at 240 Volt AC Supply complete as required.
3
-
-
... More
Supplying, installation, testing & commissioning of exit point directional sound speaker with voice and integral audio amplifier with selectable sound pulse patterns complete as required.
3
-
-
... More
Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required.
1
-
-
... More
Providing and fixing of self illuminated / auto glow "EXIT" signs printed on photoluminescent sheet containing self illuminated base chemical, of appropriate size not less than 300 x 150 mm, suspended from ceiling or fixed to the walls with accessories as required and as directed at site
6
-
-
... More
INTERNAL WIRING AND FINAL DISTRIBUTION BOARDS
-
-
-
... More
Wiring for Light point / Fan point / Exhaust Fan point / Call Bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit , with modular switch ,modular plate ,suitable GI box as required Group - C
400
-
-
... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.
6
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
... More
S.P 5/6 amps, one way modular switch, ISI Marked
100
-
-
... More
S.P 15/16 amps, one way modular switch, ISI Marked
75
-
-
... More
5 pin 5/6 amps, modular socket Outlet, ISI Marked
100
-
-
... More
6 pin 15/16 amps, modular socket Outlet, ISI Marked
75
-
-
... More
Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
45
-
-
... More
Supplying and fixing Brass Batten/ Angle holder including connections etc. as required.
3
-
-
... More
DB SUBMAIN WIRING IN STEEL CONDUITS
-
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
-
-
-
... More
2 X1.5 sq. mm + 1 X 1.5 sq. mm earth wire Metre
1400
-
-
... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Metre
1650
-
-
... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre
1950
-
-
... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre
50
-
-
... More
4 X 6 sq. mm + 2 X 6 sq. mm earth wire Metre
50
-
-
... More
4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre
80
-
-
... More
4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre
80
-
-
... More
POWER SOCKETS
-
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in Front on surface or in recess ,including providing and fixing 3 pin 5 / 6 amps modular socket outlet and 5 / 6 amps modular switch,connection, painting etc.as required.
100
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in Front on surface or in recess ,including providing and fixing 6 pin 15 / 16 modular socket outlet and 15 / 16 amps modular switch,connection,painting etc.as required.
75
-
-
... More
DISTIRIBUTION BOARD
-
-
-
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted includingearthing etc. as required. (But without MCB/RCCB/Isolator) 12 way Double Door
3
-
-
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without
MCB/RCCB/Isolator)
-
-
-
... More
6 way Double Door
1
-
-
... More
8 way Double Door
1
-
-
... More
12 way Double Door
1
-
-
... More
Supplying and fixing of following ways surface/ recess
mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) asrequired . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
-
-
-
... More
6 way Double Door
3
-
-
... More
12 way Double Door
3
-
-
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with
connections, testing and commissioning etc. as required.
-
-
-
... More
6/32 SP
240
-
-
... More
6/32A DP
6
-
-
... More
40A TPN
2
-
-
... More
50/63A TPN
20
-
-
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. asrequired.
-
-
-
... More
16/25 Amps
5
-
-
... More
40A
5
-
-
... More
63A
27
-
-
... More
80A
1
-
-
... More
100A
1
-
-
... More
Providing and fixing following rating and breaking capacity and 4 pole MCB with thermomagnetic release and terminal spreaders with cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 25-63A 16KA fixed thermal setting
9
-
-
... More
IP BASED CCTV SYSTEM
-
-
-
... More
Supply, installation, testing and commissioning of UL Listed 1.3 Megapixel CMOS Vandal-proof, Network Dome Camera (1280 × 960) resolution, 1/3” Progressive scan CMOS, 0.01Lux@F1.2, AGC ON. 0 Lux with IR on, IR cut filter with auto switch, IR range up to 30 mtrs, H.264 / MJPEG, Dual stream, motion detection, Bit rate 32 Kbps-16Mbps, 3D DNR, DWDR, 12 VDC ± 10%, PoE , IP66, K-10, with fixed lens between (2.5 - 12mm), size of lens shall be as per site requirement & mockup. ONVIF, SIP, NMS, Profile S supported, connectors complete as required in dome shape fixed type for mounting recessed in false ceiling or mounted on wall complete as required.
6
-
-
... More
Supply, installation, testing and commissioning of UL Listed 1.3 Megapixel CMOS, Vandal-proof, Network Bullet Camera,(1280x960)resolution, 1/3” Progressive scan CMOS, 0.01@F1.2, AGC ON. 0 Lux with IR on, IR cut filter with auto switch,, H.264 / MPEG4 , Dual stream, Bit rate 32 Kbps-16Mbps, Standard IP66, PoE , with Fixed Lens between (2.5 - 12mm), size of lens shall be as per site requirement & mock-up ,IR range Up to 50 mtr, motion detection, with ONVIF, SIP, NMS, Profile S supported, connectors complete as required IR Bullet fixed type for mounting on wall or surface mounted with back box and adapter plate complete as required.
1
-
-
... More
Supply, installation, testing and commissioning of Professional Video management and recording software and hardware comprising 32Ch. NVR to record output of all cameras mentioned above in Item no 1,2,3 Third-party network cameras supported, H.264 Compression - Up to 5 Megapixels resolution recording, multiple Hard Disk 8 SATA with each having maximum storage capacity of 6 TB , as required for minimum 30 days recording required for recording when in 80% motion @ 720p 25 Frames per second(Real Time) or for recording when not in motion @720p 12.5 Frames per second, with RAID-5 Storage ,10/100/1000 MBps network interface with each NVR, 2 USB2.0, HTTP Networkable, backup by USB/DVDWR, required Client software included, 6 Nos Client licenses and required Camera licenses for each camera complete as required. All the components to be of same make as Camera.
1
-
-
... More
Supply,installation,testing and commissioning of 32” CCTV colour LED screen including all accessories complete as required.
1
-
-
... More
Supply, installation, testing and commissioning of Layer 3 switch HP/ Cisco make with 16 ports PoE managed, 10/100/1000 EB core switches to support all IP cameras & Access Control System , with 2 Fibre uplinks Port module only complete as required.
1
-
-
... More
Supply, installation, testing and commissioning of Layer 2 switch HP/ Cisco make with 32 ports PoE managed, 10/100/1000 EB core switches to support all IP cameras & Access Control System , with 2 Fibre uplinks Port module only complete as required.
1
-
-
... More
Supplying and installation of 19" 42U APW President Rack with glass front door, steel rear door, power supply, MCB, cable manager, drawer shelves and wiring channels to accommodate systems equipment and accessories as mentioned in the BOQ above and including all connections and terminations as required
1
-
-
... More
Supply and Laying of Cat-6 Cable in existing conduits for Cameras
800
-
-
... More
Supply and Laying of 3C-2.5 Sq. mm unarmoured copper Power Cable in existing conduits for Cameras power supply
150
-
-
... More
Supply and Laying of 3C-1.5 Sq. mm unarmoured copper Power Cable in existing conduits for Cameras power supply
100
-
-
... More
Supplying and fixing of following size PVC conduit alongwith the accessories in surface / recess including painting in case of surface conduit or cutting and making good the same in case of recessed conduit as required as per specification.
-
-
-
... More
20mm dia
200
-
-
... More
25mm dia
500
-
-
... More
32mm dia
50
-
-
... More
UPS/INV SYSTEM
-
-
-
... More
10 KVA online UPS three phase input and three phase outlrut power system of input Voltage range 110V AC i 5% - 300V AC t 5%, Frequenry range 40Hz - ffiHz, Power Factor 0.90 @ full load, and output Voltage range 200y /208/20/230/240Y AC, Voltage regulation t 1%, Frequency range 50Hz n 0.25H2 or 60Hz t .30H2 Harmonic disbortion - 2%THD (Linear load) :4% THD (non-liniear load) pfficenrw- 88/83%
1
-
-
... More
MS battery rack suitable for 15 to 20 UPS Battery installation
1
-
-
... More
100 Ah flat type Lead acid battery with 24 month replacement guaranty. IS:1652:1991
8
-
-
... More
SPLIT AC
-
-
-
... More
1.5Tr. 5 Star split A.C (Inverter Type) IS-1391-part-1
20
-
-
... More
2.0Tr. S Star Split A.C (hiverter Type) IS-1391-part-l
20
-
-
... More
Copper Tube of size l I 4 '' for split ac unit 1 /l.5/2/3 tr capac:ty nitride rubber insul;1tion
600
-
-
... More
4 KVA wall mounted AUTOMATIC voltage STABLIZER from range HOV to 28OV
40
-
-
... More
Drain pipe for ac
650
-
-
... More
Outdoor stand for 1.5Tr Split AC
20
-
-
... More
Outdoor stand for 2.0Tr Split AC
20
-
-
... More
FURNITURE WORK
-
-
-
... More
Supplying and placing of Visitor Chair,* FIX CANTILEVER ,
* ALL OVER SIZE IS : 595MM(L)X 510MM(D)X 875MM(H) ,
*THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR .
IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE .
DETAILS :
* ARMS : PADDED ARMREST.
* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD (IS GRADE - 303 FOR SEAT AND BACK) .
* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT
* ONLY SEAT SIZE IS 500MM(L)X 510MM(D)X 455 MM(H) & THE BACK SIZE IS 440MM(L)X 595MM(H) , BACK HEIGHT IS @ 440MM .
* BASE : 4 LEGS METAL POWDER COATED.The product must be from a Manufacturer having ISO 9001,ISO 14001,,AIOTA ,BIFMA COMPLIANT, GREEN GUARD,SEDEX CERTIFICATE. MAKEDURIAN.WARRANTY-5YEARS.MODEL NO-MMPL/70018/CN
40
-
-
... More
Supplying and placing of Library Table,SIZE : (W)1200MM X (D)900 MM X (H)750MM,MADE OF 25MM THICK PRELAM PARTICLE BOARD TABLETOP SUPPORTED WITH POWDER COATED "C" SHAPE METAL LEGS OF SIZE 50MM X 50MM AND CONNECTORS OF SIZE 40MM X 40MM. PROVIDING 0.8MM THK MS POWDER COATED CRCA SHEET PERFORATED MODESTY PANEL AT FRONT SIDE, BELOW TOP. IN BROWN-CLASSIC WALNUT COLOR WITH MAIN TABLE SIZE 1200MM(L) X 900MM(D) X 750MM(H). Table which without wire manager.
The product must be from a Manufacturer having ISO 9001,ISO 14001
,,AIOTA ,BIFMA COMPLIANT, GREEN GUARD,SEDEX CERTIFICATE. MAKE:DURIAN.WARRANTY-5YEARS.
29
-
-
... More
Supplying and placing of Library Chair,* LOW BACK 360° DEGRE REVOLVING CHAIR SKU : 70020/LB,
* ALL OVER SIZE IS : 625MM(L)X 450MM(D)X 920MM(H) ,
*THE CHAIR MADE OF FULL MESH IN BLACK COLOUR .
IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE .
DETAILS :
* ARMS : FIXED PP ARMREST .
* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD (IS GRADE - 303 FOR SEAT).
* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : FRAME OF DESIGN SHALL BE CURVED MADE OF TWO PIECES INJECTION MOULDED FRAME COVER WITH MESH .BACKREST SUPPORT MESH DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT* MECHANISM : SYNCRO SINGLE LOCKING MECHANISM .
* ONLY SEAT SIZE IS 445MM(L)X 450MM(D)X 520-425MM(H) & THE BACK SIZE IS 625MM(L)X 480MM(H) ,SEAT MAXIMUM HEIGHT IS 520MM & MINIMUM HEIGHT IS 425MM & BACK HEIGHT FROM FLOOR MAXIMUM HEIGHT IS 920MM & MINIMUM HEIGHT IS 820MM .*GAS LIFT 100 MM TELESCOPIC HAUDRAULIC * BASE : 650MM NYLON BASE WITH SMOOTH CASTORS . The product must be from a Manufacturer having ISO 9001,ISO 14001,, AIOTA ,BIFMA COMPLIANT, GREEN GUARD,SEDEX CERTIFICATE. MAKE:DURIAN.WARRANTY-5YEARS.MODEL NO-70020/LB/STANDARD
181
-
-
... More
* Supplying and placing of 4 Seater Cafeteria Table, PU Coated size shall be 1135 Width mm x 1175 Depth mm x 750 Height mm . Top shall be 25 mm thick base material shall be 25 mm MDF board . On top PU painting of minimum 2H hardness with 75% glass as per color chart.Combination color graphics on the centre . Brown Laminate on bottom specially profiled edges for comfort . The Understructure shall be having bend pipe structure of MS powder coated . Pipe dia 38 mm , 2 mm thick and it shall be fitted with top by SS machine screws . Legs shall be of MS powder coated and 38 mm dia. pipe legs are fixed with inderstructure and table top . Glide shall be of Plastic fixed at the understructure to prevent the damage of table top during stacking The product must be from a Manufacturer having ISO 9001,ISO 14001
,,AIOTA ,BIFMA COMPLIANT, GREEN GUARD,SEDEXCERTIFICATE.MAKEDURIAN.WARRANTY-5YEARS.
11
-
-
... More
Supplying & providing cafeteria chair size is 381mm(l)x 419mm(d)x 839mm(h) a combination of synthetic fiber with stainless steel make the products utile and a delight, the complete structure shall be made up of 20% glass filled blow molded high-density polyethylene andis,the frame structure shall be supported by ( 2 straight + 2 slant ) four legs.the tubular welded frame is made from dia2.22 +/- 0.03cmx 0.12+/- 0.0128 cm and 3.5+/- 0.03 cm x 0.12+/- 0.0128 am stainless steel 202 grade tube & the tube are buff polished to give shiny finish.seat and in back given handle to hold are made of injection moulded high impact strength polypropylene polymer compound with indoor grade uv resistance and pressed fitted with legs.the chair is easy to store when not in use, since you can stack up to 6 chairs on top of each other.The product must be from a Manufacturer having ISO 9001,ISO 14001
,,AIOTA ,BIFMA COMPLIANT, GREEN GUARD,SEDEX CERTIFICATE. MAKEDURIAN.WARRANTY-5YEARS.MODEL NO-BRIGHTON
44
-
-
... More
Supplying and placing of Reception Table Size: 2100Lx600Wx1050Ht. Table top made up of 25mm thick pre-laminated particle board with 2mm thk pvc edge banding. Understructure shall be made Modesty & side panel shall be 18 mm thk prelma particle board with 2mm thk pvc edge banding . Table top height will be 750mm from floor level & one additional top at the height of 300 mm above the table top rest on SS stud . overall ht of the table 1050mm. The working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. The product must be from a Manufacturer having ISO 9001,ISO 14001,, AIOTA ,BIFMA COMPLIANT, GREEN GUARD,SEDEX CERTIFICATE. MAKEDURIAN.WARRANTY-5YEARS.
1
-
-
... More
* Supplying and placing of Reception Chair,* HIGH BACK 360° DEGRE REVOLVING CHAIR ,
* ALL OVER SIZE IS : 600MM(L)X 660MM(D)X 1275MM(H) ,
*THE CHAIR MADE OF FULL UPHOLSTERY IN BLACK COLOUR .
IT WILL COMES IN MATTE FINSIH ABOUT STYLE TYPE IS MODERN.
DETAILS :
* ARMS : FIXED ARMS P.P. CONNECTED WITH SEAT AND BACK .
* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD (IS GRADE - 303 FOR SEAT AND BACK) .* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT* MECHANISM : SYNCHRO SINGLE LOCKING.
* ONLY SEAT SIZE IS 460MM(L) X 500MM(D) & BACK HEIGHT IS @ 700MM,
* SEAT MAXIMUM HEIGHT IS 585MM & MINIMUM HEIGHT IS 485MM & BACK HEIGHT FROM FLOOR MAXIMUM HEIGHT IS 1275MM & MINIMUM HEIGHT IS 1175MM .
* GAS LIFT 100 MM TELESCOPIC HAUDRAULIC * BASE : 650MM NYLON BASE WITH SMOOTH CASTORS . The product must be from a Manufacturer having ISO 9001,ISO 14001,,AIOTA ,BIFMA COMPLIANT, GREEN GUARD,SEDEX CERTIFICATE. MAKEDURIAN.WARRANTY-5YEARS.MODEL NO-70001/HB/SANDARD
2
-
-
... More
Providing and placing Of 3 Seater Sofa,Material & Subtype Premium Leatherette
Frame Material Solid Wood
Upholstery Material Premium Leatherette
Filling Material Foam
Seat Material Premium Leatherette
Leg Material PVC
Finish Matte
Colour & Colour Family Black - Eerie Black
Dimension (W)1905mm X (D)890mm X (H)870mm
Seating Capacity 3 Seater
Seating Height 445mm
Size Compact
The product must be from a Manufacturer having ISO 9001,ISO 14001,, AIOTA ,BIFMA COMPLIANT, GREEN GUARD,SEDEX CERTIFICATE. MAKEDURIAN.WARRANTY-5YEARS.MODEL NO-BERRY/55001/A/3
2
-
-
... More
Supplying and placing of 1 Seater Sofa,Material & Subtype Premium Leatherette
Frame Material Solid Wood
Upholstery Material Premium Leatherette
Filling Material Foam
Seat Material Premium Leatherette
Leg Material PVC
Finish Matte
Colour & Colour Family Black - Eerie Black
Dimension (W)960mm X (D)890mm X (H)870mm
Seating Capacity 1 Seater
Seating Height 445mm
Size Compact
The product must be from a Manufacturer having ISO 9001,ISO 14001,, AIOTA ,BIFMA COMPLIANT, GREEN GUARD,SEDEX CERTIFICATE. MAKEDURIAN.WARRANTY-5YEARS.Model No-BERRY/55001/A/1
4
-
-
... More
Supplying and placing of Center Table,Material & Subtype Veneer,Solid Wood - Steam Beech Wood
Table Top Material Veneer
Leg Material Solid Wood
Finish Matte
Colour & Colour Family Brown - Wenge
Dimension (W)1200mm X (D)600mm X (H)460mm
Table Top Thickness 36mm
Size Standard.The product must be from a Manufacturer having ISO 9001,ISO 14001,,AIOTA ,BIFMA COMPLIANT, GREEN GUARD,SEDEX CERTIFICATE. MAKEDURIAN.WARRANTY-5YEARS.MODEL NO-MOLLY/CT
2
-
-
... More
Supplying and placing of Side Table,Material & Subtype Veneer/Solid Wood - Steam Beech Wood
Table Top Material Veneer
Leg Material Solid Wood
Finish Matte
Colour & Colour Family Brown - Wenge
Dimension (W)650mm X (D)500mm X (H)460mm
Table Top Thickness 36mm
Size Compact.The product must be from a Manufacturer having ISO 9001,ISO 14001,,AIOTA ,BIFMA COMPLIANT, GREEN GUARD,SEDEX CERTIFICATE. MAKEDURIAN.WARRANTY-5YEARS.MODEL NO-MOLLY/ST
4
-
-
... More
* Supplying and placing of Table, Office desk desk structure of rectangular shape .
Primary work surface over all size is 1200mm(l)x 500mm(d)x 750mm(h) 18mm thick table top made of 18mm thick prelaminated particle board work surface with the exposed edges shall be finished with 2mm thick edge binding tape of matching colour and shade with the hot melt glue . Modesty pannel made of 18mm thick.understructure made of 18mm thick.
* construction below table top right side on 1 drawer with lock right & left side table top based on a 18mm thick side pannel .
*1 drawer,in provided with lock for security and handles are provided for easy of opening.
Overall construction of pedestal is 18 mm along with fecia of drawers.
The product must be from a Manufacturer having ISO 9001,ISO 14001,,AIOTA ,BIFMA COMPLIANT, GREEN GUARD,SEDEX CERTIFICATE. MAKEDURIAN.WARRANTY-5YEARS.MODEL NO-COMPTON/B
1
-
-
... More
Supplying and placing of U Shape Conference Table In between u shape table top Allover length is @ 10500 mm, tabletop offers you a generous workspace,desk primary work surface use premium quality materials over all size is 10500mm(l)x 600mm(d)x 750mm(h) table top made of 36mm thick which give more surface area for work ,machine made modular furniture made prelaminated particle board of grade ii type iii of is 12823/latest,
* construction provision of conference tabletop supported with 18mm thick side pannels in brown-black oak colour made by prelaminated particle board and below the top 18mm thick prelam particle board modesty panel.our work surface furniture is finished with exposed edges shall be finished with 2mm thick edge binding tape of matching colour and shade,fixed with hot melt glue.
The product must be from a Manufacturer having ISO 9001,ISO 14001,, AIOTA ,BIFMA COMPLIANT, GREEN GUARD,SEDEX CERTIFICATE. MAKEDURIAN.WARRANTY-5YEARS.Model No-DWS/34762 (CP-2,SP1-6)
1
-
-
... More
Supplying and placing of Conference Chair,* High back 360° degre revolving chair ,
* all over size is : 640mm(l)x 480mm(d)x 1240mm(h) ,
*the chair made of full mesh in black colour .
It will comes in matte finsih about style type is gf nylon structure with nylon net on back .
Details :
* arms : fixed pp armsrest .
* use of ply: 12 mm thick hot pressed bwr plywood (is grade - 303 for seat).
* seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat , * back : frame of design shall be curved made of two pieces injection moulded frame cover with mesh .backrest support adjustable lumbar support
* mechanism : single locking mechanism .
* gas lift 100 mm telescopic haudraulic * base : 650mm nylon base with smooth castors
The product must be from a Manufacturer having ISO 9001,ISO 14001,, AIOTA ,BIFMA COMPLIANT, GREEN GUARD,SEDEX CERTIFICATE. MAKEDURIAN.WARRANTY-5YEARS.MODEL NO-DEFINE/HB/STANDARD
18
-
-
... More
* Supplying and placing in position of smart-l-shape non sharing desking system workstation of size 1500mm x 600mm x 1050mm. * table top size is 1500 mm (l) x 600 mm (d), 25 mm thick prelam particle board tabletop with machine pressed exposed edges shall be finished with 2 mm thick pvc edge binding tape of matching colour and shade fixed with the hot melt glue. Tabletop supported with powder coated slant shape metal legs of size 50 mm x 20 mm and connectors of size 40 mm x 40 mm horizontal connectors,0.8 mm thick wire management hole with pvc grooment on table top, Single metal powder coated raceway & 150 x 50 mm vertical wire carrying pole below top for wire management, all metallic parts should be epoxy polyester powder coating to thickness of 50 micron (approx) .
18mm thick soft board above table top with pvc "t" patty on edge height @ 300 mm above table top at front side supported with m.s metal powder coated holder .
* three layer prelaminated particles board (wood product) of grade ii type iii of is 12823/latest .
.Mobile pedestal 400 x 450 x600 ht pedestal side, back, top, facia shall be 18mm thick andDrawer base 9mm thick. The pedestal shall have 3 nos. Of drawer i.e. 2 box drawer and 1Filing drawer. The product must be from a Manufacturer having ISO 9001,ISO 14001,, AIOTA ,BIFMA COMPLIANT, GREEN GUARD,SEDEX CERTIFICATE. MAKEDURIAN.WARRANTY-5YEARS.MODEL NO-SMART/5X5
18
-
-
... More
Supplying and placing of Medium Back Chair, * Medium back 360° degre revolving chair sku : define/mb/eco ,
* all over size is : 610mm(l)x 470mm(d)x 1040mm(h) ,
*the chair made of full mesh in black colour .
It will comes in matte finsih about style type is gf nylon structure with nylon net on back .
Details : * arms : fixed pp armsrest .
* use of ply: 12 mm thick hot pressed bwr plywood (is grade - 303 for seat).
* seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat , * back : frame of design shall be curved made of two pieces injection moulded frame cover with mesh .backrest support adjustable lumbar support
* mechanism : single locking mechanism .* gas lift 100 mm telescopic haudraulic * base : 650mm nylon base with smooth castors The product must be from a Manufacturer having ISO 9001,ISO 14001,, AIOTA ,BIFMA COMPLIANT, GREEN GUARD,SEDEX CERTIFICATE. MAKE:DURIAN.WARRANTY-5YEARS.MODEL NO-DEFINE/MB/STANDARD
49
-
-
... More
* Supplying and placing in position of smart-l-shape non sharing desking system workstation of size 1500mm x 600mm x 1050mm. * table top size is 1500 mm (l) x 600 mm (d), 25 mm thick prelam particle board tabletop with machine pressed exposed edges shall be finished with 2 mm thick pvc edge binding tape of matching colour and shade fixed with the hot melt glue. Tabletop supported with powder coated slant shape metal legs of size 50 mm x 20 mm and connectors of size 40 mm x 40 mm horizontal connectors,0.8 mm thick wire management hole with pvc grooment on table top, Single metal powder coated raceway & 150 x 50 mm vertical wire carrying pole below top for wire management, all metallic parts should be epoxy polyester powder coating to thickness of 50 micron (approx) .
18mm thick soft board above table top with pvc "t" patty on edge height @ 300 mm above table top at front side supported with m.s metal powder coated holder .
* three layer prelaminated particles board (wood product) of grade ii type iii of is 12823/latest .
.Mobile pedestal 400 x 450 x600 ht pedestal side, back, top, facia shall be 18mm thick andDrawer base 9mm thick. The pedestal shall have 3 nos. Of drawer i.e. 2 box drawer and 1Filing drawer. The product must be from a Manufacturer having ISO 9001,ISO 14001,, AIOTA ,BIFMA COMPLIANT, GREEN GUARD,SEDEX CERTIFICATE. MAKEDURIAN.WARRANTY-5YEARS.MODEL NO-SMART/5X5
9
-
-
... More
Supplying and placing of Table,Office desk office desk structure of rectangular shape .
Primary work surface over all size is 1200mm(l)x 600mm(d)x 750mm(h) 25mm thick table top made of 25mm thick prelaminated particle board work surface with the exposed edges shall be finished with 2mm thick edge binding tape of matching colour and shade with the hot melt glue . Modesty pannel made of 18mm thick, wire management hole with pvc grooment on table top.
*construction right side of table top is based on a fixed pedestal 3 drawers & from left side of table top is based on 18mm thk engineered wood pvc edge banding pedestal back,top,bottom & drawers are made of 18mm thick with 1 cpu trolly made in black metal powder coated.
*fixed pedestal:l:410mm(l)x 580mm(d)x 750mm(h) ,in provided with cetnral lock for security and handles are provided for easy of opening.
Overall construction of pedestal is 18 mm along with fecia of drawers. The product must be from a Manufacturer having ISO 9001,ISO 14001,, AIOTA ,BIFMA COMPLIANT, GREEN GUARD,SEDEX CERTIFICATE. MAKE:DURIAN.WARRANTY-5YEARS.MODEL NO-DWS/34722
2
-
-
... More
* Supplying and placing in position of smart linear non sharing desking system workstation of size 1200mm x 600mm x 1050mm.
* table top size is 1200 mm (l) x 600 mm (d), 25 mm thick prelam particle board tabletop with machine pressed exposed edges shall be finished with 2 mm thick pvc edge binding tape of matching colour and shade fixed with the hot melt glue. Tabletop supported with powder coated slant shape metal legs of size 50 mm x 20 mm and connectors of size 40 mm x 40 mm horizontal connectors,0.8 mm thick wire management hole with pvc grooment on table top, Single metal powder coated raceway & 150 x 50 mm vertical wire carrying pole below top for wire management, all metallic parts should be epoxy polyester powder coating to thickness of 50 micron (approx),
18mm thick soft board above table top with pvc "t" patty on edge height @ 300 mm above table top at front side supported with m.s metal powder coated holder .
* three layer prelaminated particles board (wood product) of grade ii type iii of is 12823/latest .
. Mobile pedestal 400 x 450 x600 ht pedestal side, back, top, facia shall be 18mm thick andDrawer base 9mm thick. The pedestal shall have 3 nos. Of drawer i.e. 2 box drawer and 1Filing drawerThe product must be from a Manufacturer having ISO 9001,ISO 14001,, AIOTA ,BIFMA COMPLIANT, GREEN GUARD,SEDEX CERTIFICATE. MAKE:DURIAN.WARRANTY-5YEARS.MODEL NO-SMART/1
44
-
-
... More
Supplying and placing of Visitor Chair,* Fix cantilever back supported powder coated fix cantilever frame chair
* all over size is : 520mm(l)x 470mm(d)x 930mm(h) ,
*the chair made of full fabric in black colour .
It will comes in matte finsih in contemporary style .
Details :
* arms : fixed armrest padded armrest.
* use of ply: 12 mm thick hot pressed bwr plywood (is grade - 303 for seat and back) .
* seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat , * back : 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in back . Backrest support foam design based on symmetrical lumbar support* only seat size is 520mm(l)x 470mm(h) . back height is @ 930mm * fixed cantilever chair . * base : m.s powder coated tublar frame of catilever type .
.The product must be from a Manufacturer having ISO 9001,ISO 14001,,AIOTA ,BIFMA COMPLIANT, GREEN GUARD,SEDEX CERTIFICATE. MAKEDURIAN.WARRANTY-5YEARS.MODEL NO-MMPL/70018/CN
2
-
-
... More
Supplying and placing of Round Table,Providing and supplying three seater modern design meeting table a combination of metal and wood make the products utile and a delight.timeless design that elevates your office space structure of spacious meeting table,tabletop offers you a generous workspace,work surface use premium quality materials over all size is ( dia ) 1200 mm x 750mm(h) ,table top made of 25 mm thick which give work surface furniture is finished with exposed edges shall be finished with 2mm thick edge binding tape of matching colour and shade,fixed with hot melt glue on prelaminated particle board of grade ii type iii of is 12823/latest, * in middle of table top power box cut-out to access switches + data ports, up box on above table top with single metal ms powder coated to the thickness 50-60 microns(+/-5 micron) raceway for wiring. And table top based on stylish crome plated led The product must be from a Manufacturer having ISO 9001,ISO 14001,, AIOTA ,BIFMA COMPLIANT, GREEN GUARD,SEDEX CERTIFICATE. MAKEDURIAN.WARRANTY-5YEARS.
10
-
-
... More
Add 18% GST
18
-
-
... More
Add 1% Labour cess 1%
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements