State Building Construction Corporation Limited Tender
Search from across the categories, cities, and authorities to find the latest Jharkhand tenders. Every Jharkhand tender is curated from credible sources of government websites (eProcurement Jharkhand portal) and newspapers, thus ensuring the credibility of the information presented to you. For more information on Jharkhand tender bidder registration, the login process and more read the FAQs section on this page.
Costs
EMD
₹ 40,13,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_JSBCC_96538_1Bid Award Id
ViewTender No
JSBCCL/103/2024-25Tender Authority
State Building Construction Corporation Limited ViewPurchaser Address
-Website
http://jharkhandtenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Taking down old door and window shutter including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.
387.5
-
-
... More
Removing dry or oil bound distemper, water proofing cement paint, all paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
15837.25
-
-
... More
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm
5455.74
-
-
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
800
-
-
... More
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed
by Engineer-in-charge.
1250
-
-
... More
Demolishing mud phaska in terracing and disposal of material within 50 metres lead.
120.4
-
-
... More
Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
80
-
-
... More
Dismantling uPVC. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :
-
-
-
... More
75 to 80 mm dia pipe internal
247.5
-
-
... More
100 mm dia pipe
165
-
-
... More
150 mm dia pipe
297
-
-
... More
Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge.
-
-
-
... More
Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works.
5412
-
-
... More
Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge.
1015
-
-
... More
Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.
5412
-
-
... More
Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge.
30
-
-
... More
Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.
450
-
-
... More
Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete.
180
-
-
... More
Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge.For door/ window/ clerestory window
72
-
-
... More
Fixing chowkhat in existing opening in brick/ RCC wall with dash fasteners/Chemical fasteners of appropriate size (3 nos on each vertical member of door chowkhat and 2 nos on each vertical member of window chowkhats), including Cost of dash fasteners/ chemical fastener.
178
-
-
... More
Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 5 km for all lifts, complete as per directions of Engineer-in-charge.
821.7
-
-
... More
CONCRETE WORK
-
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-Ill) : 4 graded stone aggregate 20 mm nominal size (canopy)
72.9
-
-
... More
REINFORCED CEMENT CONCRETE WORK
-
-
-
... More
Dry Lean Cement Concrete Sub- base (Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing.)
5.55
-
-
... More
Cement Concrete Pavement (Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing )
2.25
-
-
... More
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.
437.4
-
-
... More
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, cement content as per approved design mix, including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate / retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. NOTE- (1) Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately.
-
-
-
... More
All works upto plinth level
133.78
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform.
577.52
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for: lintels, beams, plinth beams. girders. bressumers and cantilevers.
1393.29
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Columns, Pillars, Piers, Abutments, Posts and Struts.
1740.2
-
-
... More
Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 6mm nominal size ), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits. 50mm thick
45
-
-
... More
Providing Tor steel reinforcement of 8mm. dia.TMT rods as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. (TMT Fe 500 (only vailid for TATA (TISCON), SAIL, JSPL, Electro steel Limited Bokaro and Vizal steel(RINL))
9.32
-
-
... More
Providing Tor steel reinforcement of 10mm,28/32mm dia. TMT rods as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. (TMT Fe 500 (only vailid for TATA (TISCON), SAIL, JSPL, Electro steel Limited Bokaro and Vizal steel(RINL))
13.98
-
-
... More
Providing Tor steel reinforcement of 12/16mm. & 20/25mm. dia. TMT rods as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. (TMT Fe 500 (only vailid for TATA (TISCON), SAIL, JSPL, Electro steel Limited Bokaro and Vizal steel(RINL))
23.31
-
-
... More
BRICK WORK
-
-
-
... More
Providing designation 75 A brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.
12.42
-
-
... More
Providing designation 100A brick work with flyash lime brick (FLAG) confirming to IS 12894-1990 (9"x4.5"x3") in C.M. (1:4) in super structure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints costs of screening materials, scaffolding, raking out joints to 15mm depth curing taxes and royalty all complete as per building specification and direction of E/I.
7.59
-
-
... More
Providing designation 112mm thick reinforced designation 100A brick work with flyash lime brick (FLAG) in (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening carriage of materials, scaffolding, raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I.
742.5
-
-
... More
Extra for providing & placing in position 2 no 6mm dia ms bar every 3rd corse of half brick masonary
742.5
-
-
... More
Extra for brick work for each consecutive floor above first floor including watering and scaffolding, all complete as per direction of Ell.
7.59
-
-
... More
WOOD WORK
-
-
-
... More
Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs,
-
-
-
... More
floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete.
-
-
-
... More
66mm overall thickness partition using 8mm thick double skin multipurpose cement board reinforced with cellulose fibre manufactured through autoclaving process (High pressuresteam cured) as per IS : 14862 with suitable fibre cement
screws
346.5
-
-
... More
Supplying, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows skylights, fanlights and C/W celetial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all completeas per building specification and direction of E/I.
0.36
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
... More
For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)
7463.88
-
-
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron)
7463.88
-
-
... More
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer- in-charge Profile C Fixing with adjustable lugs with split end tail to each jamb
132.39
-
-
... More
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides.
53.99
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-incharge. (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 5.50 mm thickness
621.99
-
-
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With brass cover plate minimum 1.25 mm thickness
10
-
-
... More
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width
132.39
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
107.98
-
-
... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (over all area of door shutter to be measured).
107.98
-
-
... More
Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) : Rectangular or square.
107.98
-
-
... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality 1.0 mm thick.
215.96
-
-
... More
Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based concrete mix, suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumuscent fire seal strip of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in-charge (Dash fastener to be paid for separately).
18.9
-
-
... More
Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately).
10.8
-
-
... More
Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/ powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-charge with glass of required thickness having 60 minutes of fire resistance both integrity & radiation control (EW60) and minimum 20 minutes of insulation (EI20). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 sqm.
10
-
-
... More
Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete.
8
-
-
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile steel wire of adequate strengh congorming to is;4454-part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25mm M.S. laths with 1.25 mm thick top cover.
13.5
-
-
... More
Providing and fixing ball bearing for rolling shutters.
5
-
-
... More
Extra for providing grilled rolling shutters manufactured out of 8 mm dia. M.S. bar instead of laths as per design approved by Engineer-in-charge.(area of grill to be measured).
13.5
-
-
... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
254
-
-
... More
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete:
-
-
-
... More
300x16 mm
254
-
-
... More
250x16 mm
330
-
-
... More
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete:
-
-
-
... More
250x10 mm
150
-
-
... More
150x10 mm
154
-
-
... More
Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade wiIh necessary screws etc. complete :
-
-
-
... More
125 mm
150
-
-
... More
100 mm
154
-
-
... More
Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete Twin rubber stopper
254
-
-
... More
Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete.
254
-
-
... More
Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer-in-charge complete 255 X 19 mm
254
-
-
... More
Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. Polyester Powder coated minimum thickness 50 micron aluminium tubular handle bar.
254
-
-
... More
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
254
-
-
... More
Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. Polyester Powder coated minimum thickness 50 micron aluminium.
254
-
-
... More
Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in-charge Polyester Powder coated minimum thickness 50 micron aluminium
254
-
-
... More
STEEL WORK
-
-
-
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
1527
-
-
... More
FLOORING WORK
-
-
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
2808.29
-
-
... More
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry@ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.
505.38
-
-
... More
providing and laying, vitrified step/dado tiles in with water absorption less than 0.08% and conforming to lS 15622/ of approved make in all cotours and shades, laid on 20mm thick cement mortar 1 4 (1 cement:4 coarse sand) jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of tile 1200x300 mm X15MM
214.21
-
-
... More
providing and laying, Doublecharge vitrified floor tiles in different sizes (thickness to be specified by lhe manufacturer) with water absorption less than 0.08% and conforming to lS 15622/ISO 13009 of approved make in all cotours and shades, laid on 20mm thick cement mortar 1 4 (1 cement:4 coarse sand) jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of tile 600x600 mm
2142.07
-
-
... More
Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills. facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, induding rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels
6
-
-
... More
Granite of any colour and shade Area of slab over 0.50 sqm.
18
-
-
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc complete as per design approved by Engineer-in-Charge. Granite work.
40
-
-
... More
Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete.
40
-
-
... More
Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete.
60
-
-
... More
Providing 50mm thick 2nd class patent stone flooring (1:2:4) with 20mm, to 6mm size graded stone chips finished with flooring coat of neat cement in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royality with all complete as per building specification and direction of E/I.
500
-
-
... More
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade
9
-
-
... More
Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. 8.mm thick Granite of any colour and shade
83.48
-
-
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
3603.1
-
-
... More
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge.
1814.03
-
-
... More
WATERPROOFING WORK AND ROOF WORK
-
-
-
... More
Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mmthick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of length
1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to formgrid module of size 600 x 600 mm, suspended from ceiling usinggalvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into 12x50mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40
mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws. The workshall be carried out as per specifications, drawing and as per directionsof the Engineer-inCharge.
-
-
-
... More
With 15 mm thick Tegular edged light weight calcium sliciate false ceiling tiles
2632.96
-
-
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :
-
-
-
... More
12.5 mm thick tapered edge gypsum moisture resistant board
4085.86
-
-
... More
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of :v) Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. vi) IInd course of 20mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.vii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 Kg. per sqm of area. viii) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.)
505.38
-
-
... More
Water proofrng for Old and New Roof Slab :- Providing and laying water prooflng treatment on roof slab by applying two Component, factory a designed ready to use, acrylic modified flexible material applied with brush, roller or spray waterproofi ng coating as per manufacturer specification-With following steps :-
-
-
-
... More
(a)surface preparation :-Provrding and cleaning of concrete surface to remove dust, oil, grease including removal of existing loose paint / coating, and cement laitance by cleaning with compressed air & water jet including all materials, labour, tools complete. Ponding test to be done after plugging all outlets and to be checked from soffit to identify seepage, leakage. On identification of seepage, cement grouting to be done with non shrink expanding admixture of Sika lndia Pvt.Ltd.
-
-
-
... More
/ MYK Schomberg / Dr Fixit/Fosroc or equrivallent. Providing and reparing of all corners and joints such as those between the parapet wall and the roof slab etc shall be chamfered with '150mm X '150 mm fillet of mortar (Cement: sand - 1:4) admixed with acrylic polymer of Sika/ Fosroc/MYK Schomberg/Dr Fixit or equivalent Before chamfering a prime coat shall be given with the slurry of acrylic polymer Repairing surface irregularities, damaged concretein base slab, dead cracks if any, with an acrylic polymer modified repair mortar including a coat of bonding agent of the same with cement slurry including all material, labour, tools complete.
-
-
-
... More
(b)1st Coat :- Apply 1st coat of two component acrylic modified, ready to use, flexible cementitious material on surface saturated dry roof and inside wall of Parapet wall upto 600 mm by brush or roller. After 1st coat of application ,45 gsm oI Fibre glass cloth to lay when the first layer is still green. 1st coat should be applied @1.50 kg/Sqmt/coat For the purpose of measurernent tte entire treated surface will be measured."
-
-
-
... More
(c) :2nd Coat:- To apply the 2nd coat of two component acrylic modified,ready to-use, flexible cementitious material right angle to the '1st coat over the glass fibre laid surface. 2nd coat should be applied @0.7 kg/ Sqmt/coat. For the purpose of measurement the entire treated surface will be measured." Alter three days of drying the 2nd coal , the rain water outles to be plugged and ponding test to be done for 48 hours to identify seepage, leakage from soffit and if found necessary rectification lo be done as per satisfation of E/c.
-
-
-
... More
The Watqrproofing Brand:*Sila Topseal 109hi / Fosroc Brushbond RFX/ Dr Fixit Pidiffin 2Kl MYK Aqraiin TG Product Performance - Chemical Base Part A.Acrylic copol;,mer, Part 13 Specially graded cementitious powder -Density 1.6 kg/l (mixed density) at +270C Tensile Strength -2 N/mm2 after 28 Days (with Fibre cloth) (According to ASTM D 2370)Pullout Bond Strenth-2 n/mm2 (concrete failure) (According to ISO.
-
-
-
... More
4624) Slant-Shear Bond Strength -4 N/mm2 (According to FIP 5.15) Elongation at Break -35% without Fibre Cloth and 20% wilh Fibre Cloth (According to ASTM D 2370)
-
-
-
... More
D Protection of treated with pcc :- The treated surface shourd be covered with 25mm/50mm PCC of M-20 grade(1:1.5:3) with proper slope ( 1:120) towards the rain outlets in alternatepanels of 2 mtx2mt keeping 6 mm gap between the panel joint. integral water proofing admixture conforming to lS 2645 @ of 100 ml perbag of of cement to be added in the screed concrete (paid separately for thts ltems
-
-
-
... More
all corners shall be charfered with 150mm X 150 mm fillet. The rain water outlets shall be just leveled with the screed concrete to ensure smooth discharge of water - the peripheral gaps between pvc pipe outlet and concrete surface should be packed properly with rich concrete and the peripheral mouth to be sealed with moisture insensitive epoxy putty of Sika lndia Pvt.Ltd / IVIYK Schomberg / Dr FixiUFosroc .For the purpose of measurement the entire treated surface will be measured."
-
-
-
... More
(e)Groove of PCC surface should be filled with Polysulphide Sealant (Paid Separately) Brand - Sika lndia Pvt Ltd / MYK Schomberg / Dr Fixit/Fosroc
2891.38
-
-
... More
Covering of treated surface wrth PCC :- Providing 50 mm thick Cement Concrete M20 (1:1.5:3) raintaining slope in alternate 2 mIx 2 mt panels with aaproved quality of stone chips of 20 mm to 6 mm size graded and clcaned sand of F M 2 5 io 3 including screening,shuttering,and mixing cerite nt c0ncrete in mixer with admixture of integral water proofing and placing rn position,strikirrg cLrring,t-a]glgnd royality all complete as per buildirrg specifictionJand direction of E/l.Panels that has been left should be casteci nextday.-lhere should be 6 mm gap between Panels.Brand- Sika *Plastocrate plus,MYK proof WP10, Fosroc- Conplast X421ic , Dr Frx,t Prdiproof LWr
2891.38
-
-
... More
Provrding and filling of Groove between 50 mm PCC Panels with Polyshlphide Sealant (Poring Grade)as per drawings and Technical specifications and dii-ection of E in Charge (with 1B% GST).Brand:-Sika- Polysulphide, Fosroc-l-hioflex 600 Dr. Fixit Pidiseal PS(42P),MYK Seal PS or Euivallent
2891.38
-
-
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement laster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
52
-
-
... More
FINISHING WORK
-
-
-
... More
Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I.
4629.05
-
-
... More
Providing 19 mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.
1880.48
-
-
... More
Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.
1880.48
-
-
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
20225.03
-
-
... More
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One or more Coats
9327.72
-
-
... More
Finishing walls with 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
4629.05
-
-
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coat applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
6268.26
-
-
... More
Painting with synthetic enamel paint of approved brand and
manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
1050
-
-
... More
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.
-
-
-
... More
(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.
-
-
-
... More
(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.
22.5
-
-
... More
Structure Glazing
-
-
-
... More
Providing and supplying aluminium extruded tubular and other aluminium sections as per the rchitectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS74,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).
462.27
-
-
... More
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts,clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including: b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers. c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment , including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture,as per the approved sealant design, within and all around the perimeter for holding glass. d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight. e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge.
-
-
-
... More
The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified,as per the approved shop drawings and as directed by the Engineerin-Charge. Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this subhead. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves ) on the external face shall be measured in sqm. up to two decimal places. Note:-2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by BL (National Accreditation Board for Testing and Calibration boratories), Department of Science & Technologies, India. Cost of testing is payable separately. The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NBL Certified laboratories 1. Performance Laboratory Test for Air Leakage Test (-50pa to –300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr”
2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME-33109testing method for a range 2000
3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.0105 testing method for arange upto 2000ml” 4. Structural Performance Deflection and deformation by static air pressure test (1.5 times desing wind pressure without any failure) as
per ASTME-330-10 testing method for a range upto 50 mm”
5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09
testing method for Qualitative test” Tests to be conducted on site
6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000ml”
66.04
-
-
... More
Providing and fixing SGU 6mm Annealed glass in aluminium/uPVc windows, ventilators and partition etc. including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete.The Properties of glass should be as : Solar heat gain Cofficiant (HSGC) =0.50 and Visual Light Transmission (VLT) =50% or more and shade to be approved by EIC/Architect.
66.04
-
-
... More
Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin- Charge.
6.6
-
-
... More
Supplying and laying Indoor Anti-Bacterial paint over ceiling and as specified by EIC, equipped with Silver Ion Technology which kills 99% of infection-causing bacteria on the painted surfaces and providing a more hygienic environment. VOC (ASTM D 6886): 50 gm/lit Does not contain carcinogens, mutagens, or reproductive toxins. Any trace contaminants should be less than 0.01% by weight. Certified by Indian Medical Association or any other competent organisation. (including putty, primer and other accessories)
360
-
-
... More
Providing & fixing Stonewool Acoustical Ceiling PACIFIC High NRC (0.80), Fire Rating A1 (EN 13501-1), RH 100% (No visible deflection in high humidity), Superior Class Light Reflection, Sag Resistant 12mm thick Ceiling Tiles of size 600x600 A-Edge (Square) with AntiBacterial Properties & M1 Class Emission Certification made up with Natural Stone (Bassalt Rock) a complete Green Product & perfect suitable for any kind of False Ceiling application in builiding & costruction. The Visible side is a smooth white painted fleece, the Rear side: back fleece with complete facctory finish Painted edges.
505.38
-
-
... More
CARRAIGE OF MATERIALS
-
-
-
... More
SAND ( 10KM )
396.33
-
-
... More
CHIPS ( 22 KM )
90.81
-
-
... More
METAL ( 22KM )
69.97
-
-
... More
BRICKS ( 1+7KM )
48.22
-
-
... More
STRUCTURE REPAIR & RESTORATION
-
-
-
... More
Stagging/Supports/Scaffoldings
-
-
-
... More
Removal of Unsound Concrete & Chipping of Concrete
-
-
-
... More
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge
-
-
-
... More
75mm average thickness
290.27
-
-
... More
50mm average thickness
431.3
-
-
... More
25mm average thickness
1155.03
-
-
... More
Rust Removal, Anti corrosive coating & Galvanic sacrificial Anodes : Corrosion Treatment
-
-
-
... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
-
-
-
... More
Providing and applying Reebaklens RR, a combination of acid based material, corrosion inhibitors and dispersing agents rust remover, for removal of all rust/ scales/corrosion from reinforcement bars before microconcreting or patch repair, having Specific Gravity 1.16-1.22 @25°C. Reebaklens RR Shall be applied with brush for complete wetting of rusted metal surface at coverage of 2-2.5 Sqm/ltr. & allow it to react for 16-24 hours. After 24 hours, a white layer will appear which will protect further corrosion of metal /steel for about 5-7 days. Before applying any protective coating, the surface should be wire brushed and thoroughly cleaned for dust with dry cloth. (Mode of measurement- per sqmt of breaking area of concrete)
1876.6
-
-
... More
Provide and install sacrificial zinc anodes Fosroc Galvashield XPI, to prevent the initiation of corrosion in steel reinforcement within chloride-contaminated or carbonated concrete, or in new construction. Each anode unit must contain a minimum of 60 grams of zinc, compliant with ASTM B418-95a, Type I, die-cast around steel tie wires, ensuring proper separation if multiple tie wires are used. The anodes must be encapsulated in a highly alkaline cementitious mortar with a pH of 14 or higher, free from sulfates, chlorides, bromides, or any other corrosive elements to steel. The encapsulating mortar should feature an interconnected and fine pore structure to dissolve, transport, and accommodate zinc corrosion products away from the anode surface without causing additional stress to the concrete cover, maintaining a pH 14 near the uncorroded zinc for the specified service life. Anode units shall be supplied with integral, well-separated tie wires (without splices if multiple wires are used) and loop ties for direct attachment to the reinforcing steel. Anodes should be covered with a bed mortar with resistivity less than 50 kOhm-cm or similar to the parent concrete on cleaned steel reinforcement before applying passivation coating. The scope includes supply, installation, spacing calculations, quality assurance procedures, and must adhere to manufacturer specifications. Approved brand shall be M/s Fosroc Galvashield Anodes/Vector Galvashield/IPSS
610
-
-
... More
1. Spacing at column shall be at 600mm C/C
-
-
-
... More
1. Spacing at slab shall be considered as 2 Nos. in 1 Sqm.
-
-
-
... More
Providing and applying Nitozinc Primer an epoxy based zinc rich anti corrosive primer having adhesive bond strength ≥ 1.5 MPa as per ASTM D4541, & shall comply to per ASTM B-117 to be applied on well cleaned, fully exposed and all loose scale, rust free surface obtained by grit blasting or suitable means, to be done with coverage @4.5sqm/litres to achieve a minimum thickness of 40 microns DFT or as per direction of Engineer-In charge. (Mode of measurement- per sqmt of breaking area of concrete )(Fosroc- Nitozinc Primer & Sika- Sika® FerroGard®-950 IN
938.3
-
-
... More
Crack repair/Epoxy grouting
-
-
-
... More
Surface Preparation: Make a 'V' groove 5 mm wide and 5 mm deep over the crack line using an electrically operated angle grinder with a diamond concrete saw blade. Clean the groove thoroughly with an air blower as directed by the Engineer-in-charge.
1060.43
-
-
... More
Sealing with Epoxy Repair Mortar: Seal the exposed 'V' groove (5 mm deep, 5 mm wide) with a solvent-free, moisture-tolerant, thixotropic, two-part structural adhesive and epoxy repair mortar cum surface leveling mortar. Ensure the epoxy repair mortar has compressive strength ≥ 60 N/mm² (7 Days, BS 6319), flexural strength ≥ 20 N/mm² (7 Days, BS 6319), and tensile strength ≥ 10 N/mm² (7 days, ASTM C 307). Use products like NITOMORTAR S OF FOSROC, Sikadur®-31 of Sika, MasterBrace 2200 BASF, or equivalent of Pidilite.
1060.43
-
-
... More
NRV Nozzles Installation: Drill and fix NRV nozzles in RC members, including (fixing material: Renderoc Plug of Fosroc / Sikadur-31 of Sika/ MasterBrace 2200 of BASF or equivalent of Pidilite& Krishna Conchem).
Drilling Holes: Drilling 12 mm dia, 50 to 75 mm deep holes or upto required depth in structural members of the intervals of 350 mm in staggered manner or as directed by the Engineer-in-charge in RC structural elements.
Cleaning of holes: Clean the holes by air blower prior to fixing nozzles.
Fixing of Nozzles: Insert 12mm dia. NRV nozzles in cleaned holes. External end of nozzles to be machine to receive outlet of grouting gun. Fix it inside the holes by applying thyrotrophic epoxy putty to ensure complete sealing. Cure the system for min. 12 hrs.
Cuttting of Nozzles: Cut the nozzles by chisel after completion of grouting without damaging structural elements.
24264
-
-
... More
Pressure Grouting with Epoxy Resin: Perform pressure grouting using Conbextra EP10, a low viscous solvent-free two-component epoxy resin with a density of 1050 kg/m³. Ensure the epoxy resin has viscosity 0.6 poise (ASTM D1200), compressive strength 80 MPa (ASTM D 695), and bond strength 4 MPa (ASTM C882). Use products with CE marking and compliance according to Construction Products Directive 89/106/EEC. Mix epoxy resin components in required quantities as per manufacturer's instructions. Fill the grouting gun with epoxy resin and maintain desired pressure using an air compressor. Grout the material through prefixed nozzles in structural elements until refusal, sealing the nozzles with epoxy putty afterward. Monitor and seal leakages through other nozzles as required. Complete the operation within the pot life of the material. Clean the grouting gun and accessories with thinner after the operation to prevent jamming. (Low Viscous epoxy grout : conbextra EP10 of Fosroc/ Sikadur®-52 of Sika/ MasterInject 1315 of BASF or equivalent of Pidilite).
2426.4
-
-
... More
Water-stopping crack injection resin foam shall be Nitofill WS60, a two-part foaming liquid polyurethane. When mixed in the supplied proportions and injected into concrete cracks, the resin reacts with moving water to create a foam barrier that stops water infiltration. The resin's properties include a pot life of 6-8 hours at 20°C, specific gravity of 1.11 ± 0.03, and foam density of 0.024g ± 0.003. Used alongside Nitofill UR63, a flexible two-part polyurethane injection resin, it ensures a permanent seal in cracked concrete. Nitofill UR63 is a solvent-free liquid polyurethane that, when mixed and injected into cracks, forms a slightly flexible and impermeable barrier in dry and damp conditions. This polyurethane system features a pot life of 60 to 80 minutes at 25°C, reaction time of 70 to 90 minutes at 25°C, viscosity of 40-60 cps at 25°C, and specific gravity of 1.1. When combined with Nitofill WS60, the foaming polyurethane resin, it guarantees a durable seal in cracked concrete.
-
-
-
... More
Nitofill WS60
2183.76
-
-
... More
Nitofill UR63
3275.64
-
-
... More
Reinforcement bar/ Rebaring
-
-
-
... More
For Shear Connector/Ties/Stirrups: Supply and fixing of shear connectors/ties/stirrups using rebars of designated dia for column/beam/Shear walls etc at designed embedement length wherever required , including power drilling, cleaning of holes, then rebars should be inserted in holes that should be filled with FIS V Plus of Fischer or equivalent, hybrid based rebarring chemical with ETA approval, DIBt, approved for diameter range from 8 mm to 28mm reinforcement bar as per manufacturer's specification as per the direction of Engg In-charge. Drilling of hole should be done upto provided embedment depth as per the design from manufacturer approved by EnC, followed by cleaning with blow pump, wire brush and blow pump for 4 times, complete as per the manufacturer's methodology. The chemical shall have tested service life of 50years as per ETA. Cost of providing, cutting, bending of rebar shall be paid separately as per approved item.
-
-
-
... More
At 15D Depth
-
-
-
... More
For 8mm x 120mm
5070
-
-
... More
For 10mm x 150mm
2958
-
-
... More
For 12mm x 180mm
1050
-
-
... More
For Main Reinforcement: Supply and fixing of main reinforcement using rebars of designated dia for column/beam/Shear walls/Foundations at designed embedement length wherever required , including power drilling, cleaning of holes, then rebars should be inserted in holes that should be filled with FIS EM Plus of Fischer or equivalent, a heavy duty pure epoxy based rebarring chemical with ETA approval, DIBt, approved for diameter range from 8 mm to 40 mm reinforcement bar as per manufacturer's specification as per the direction of Engg In-charge. Drilling of hole should be done upto provided embedment depth as per the design from manufacturer approved by EnC, followed by cleaning with blow pump, wire brush and blow pump for 4 times, complete as per the manufacturer's methodology. The chemical shall be approved for diamond-drilled and water-filled drill holes as well as seismic applications in performance categories C1, C2 for rebar connections. Product shall have test certificate for 120years of service life & shall have ETA complying to EAD 332402-00-0601-v01. Cost of providing, cutting, bending of rebar shall be paid separately as per approved item.
-
-
-
... More
At 15D Depth
-
-
-
... More
For 12mm x 180mm
5088
-
-
... More
For 16mm * 240mm
2544
-
-
... More
For 20mm * 300mm
3816
-
-
... More
For 25mm * 375mm
3816
-
-
... More
For 32mm * 480mm
1272
-
-
... More
Epoxy bonding agents for bonding old Concrete & Repair materials
-
-
-
... More
Providing and applying bond coat on the prepared surface with two component epoxy based bonding coat Nitobond EP of Fosroc make or equivalent, having specific gravity 1.15 to 1.2 gm/cc,. The bonding agent shall be applied by brush & should remain in tacky state after application for a minimum period of 5-6 hrs at 20 deg C & 2-3 hrs at 30 deg C. Laying of reinstatement polymer modified mortar or micro concrete shall be completed within the overlay time of bonding coat.
938.3
-
-
... More
Supply and apply Nitobond AR, an acrylic-based emulsified solution containing a minimum of 43% solids and compatible with cementitious materials. The bonding agent shall provide sufficient bond strength when applied directly on concrete or when mixed with neat cement. Ensure proper application to achieve effective adhesion between substrates and subsequent layers of cementitious materials, adhering to manufacturer's recommendations for optimal performance and durability in construction applications. Nitobond AR is particularly suitable when a longer working period after applying the bonding agent is required
938.3
-
-
... More
Microconcrete
-
-
-
... More
Provide and apply single-component, free-flowing, non-shrink cementitious microconcrete at a water-to-powder ratio of 0.15. The microconcrete should have a fresh wet density of 2200 kg/m³ at 27°C and an unrestrained expansion of 1 to 4% as per ASTM C827. It must achieve a flowable consistency and compressive strength of not less than 10 N/mm² after 24 hours, 35 N/mm² after 7 days, and 45 N/mm² after 28 days at 30°C. The cured microconcrete shall be free from metallic aggregates and chlorides, and it must be shrinkage-compensated in the plastic state. Payment will be based on the consumed dry material of the microconcrete mix (Product :- Renderoc RG 45 of Fosroc/ SikaRep® Microcrete -4 of Sika / MasterEmaco S-346 of BASF or equivalent of Pidilite)
-
-
-
... More
a) Without addition of aggregate
177.13
-
-
... More
b) With addition of 6 mm down aggregate in 3:1 (3 Micro concrete: 1 aggregate 6 mm & down)
118.09
-
-
... More
Providing mixing & applying pre-batched one component polymer modified dual shrinkage compensated thixotropic cementitious patch repair mortar as per the manufacturer specifications and as per the direction the Engineer-in-charge. The compressive strength of polymer modified mortar shall be ≥ 45 Mpa (28 Days) according to (BS 1881 Pt.116), Flexural strength 7 N/mm2 at 28 days (BS 6319 Pt.3) and Tensile strength 2.5 N/mm2 at 28 days (BS 6319 Pt.7). (Product :- Renderoc SP40 of Fosroc/ SikaTop® 122 HS of Sika / MasterEmaco S 348 of BASF or equivalent of Pidilite)
-
-
-
... More
For 20 mm thickness over slab, beams, columns and stair case slabs
375.32
-
-
... More
Add/ deduct for every 10 mm thickness
93.83
-
-
... More
Curing Compound
-
-
-
... More
Supply and apply Concure WB White, a water-based concrete curing compound, to prevent premature water loss from freshly placed concrete. Ensure complete coverage of all exposed concrete surfaces according to manufacturer's recommendations for effective curing and hydration, promoting optimal strength development and durability of the concrete structure
1876.6
-
-
... More
Strengthening: Carbon fibre wrap/Carbon Laminates
-
-
-
... More
Providing and applying uni directional, high strength carbon fiber sheets Nitowrap CWS of 450 GSM/ dry fabric thickness.The FRP fabric used shall be of zero degree unidirectional fibers having fiber density of 1.8 g/cc and shall have tensile strength 4900 MPa ; tensile modulous 230 GPa and ultimate elongation of 2.1%. The substrate shall be primed with Nitowrap 30 epoxy primer & Nitowrap 410 impregnating resin saturant shall be used for saturating the fibers. Saturant used shall have tensile strength of 30 MPa; Elongation 2% ; Flexural strength 30 MPa ; Tensile Modulous 2400 MPa & Flexural Modulous 1700 MPa when tested as per ASTM D638 Type I and ASTM D 790 & Glass Transition Temperature 50 deg Celcius as per ASTM E 1356.The adhesion of the entire system(FRP Sheet, Saturant and primer combined) with concrete shall be 3.5 MPa with concrete failure as per ASTM D 4541.
(Product :- Nitowrap CWS of 450 GSM of Fosroc, Sikawrap® 930 G of Sika / MasterBrace FIB 73/900 of BASF)
Surface preparation: Grinding/ moulding concrete substrate cleaning it with wire brush removing oil, laitance if present, rounding sharp edges to min 25mm radius etc. complete.
Profiling : Applying compatible primer of approved make and brand on prepared substrate, filling the holes and uneven surface with thixotropic putty etc. complete.
Wrapping : Wrapping the fiber sheet with recommended overlapping to structural element at desired oriention using tamping roller to avoid any air voids etc. repeat the same procedure for multiple layer with the interval of 8 hrs.
Sand Pasting : Applying second coat of saturated after 12 hrs. rectify air voids if any, paste the coarse sand on it to make surface rough to take any further finishes
(Mode of measurement : Per sqm surface area of application per layer).
192.72
-
-
... More
Supply and install fiber anchors to be embedded at a depth of 75 mm with 75 mm protrusion, spaced at 500 mm center to center. (Product make: Fosroc/ Sika/ BASF)
385.44
-
-
... More
Providing and applying Carbon Fiber FRP Pultruded Laminate strips Nitoplate CPS to the prepared substrate using thixotropic epoxy adhesive. The FRP laminate used shall be of zero degree unidirectional fibers having volumetric fiber content of 68%, fiber density of 1.5 g/cc and shall have tensile strength of 3000 MPa ; tensile modulous of 165 GPa and ultimate elongation of 1.7%. The thixotropic epoxy bonding adhesive shall be applied at 1mm thickness on the substrate and 2mm thickness on the laminate. The adhesion of the entire system(Laminate and adhesive combined) with concrete shall be 3.5 MPa with concrete failure as per ASTM D 4541. The adhesive used shall have tensile modulous 2700 MPa (ASTM D638) ; flexural modulous 48000 MPa (ASTM D790 ) ; Elongation 2.5% & Glass Transition TemPerature 100 deg C (ASTM E 1356). The ends of the laminates shall be anchored suitably.,etc complete. Laminates shall be having 1.4mm Thickness and 100mm width.
450.89
-
-
... More
Exposed surface area painting
-
-
-
... More
Supply and apply Dekguard E2000, a high-performance elastomeric protective anticarbonation coating for concrete and masonry. The protective coating system includes a penetrating silane-siloxane primer (Dekguard Primer) and a single-component elastomeric anticarbonation aliphatic acrylic coating (Dekguard E2000). Ensure the total dry film thickness of the protective coating system is not less than 200 microns. The coating system shall provide CO2 diffusion resistance of at least 50 meters (equivalent air layer thickness), static crack accommodation of minimum 2mm, and adhesion greater than 1.0 N/mm² as per ASTM D 4541. The product used must meet specified performance standards for durability and protection against carbonation. Apply in accordance with manufacturer's guidelines to ensure effective long-term performance and adherence to project requirements
375.32
-
-
... More
FURNTURE WORK
-
-
-
... More
CUBICAL WORKSTATION -CUBICAL WORKSTATION SIZE: 1350L+1350X 600DX 1200HT. ·67mm thk Sliding Tile Based Partition. · Single Metal raceway cover at skirting level in Partition.· Pin up & white board in partition above the tabletop.· Table top made of 25mm thk Prelamin particle board with pvc edges. · Tabletop supported with 18mm thk side panel Prelaminated Particle Board with Pvc edge banding side. ·Pedestal of 400Lx 450Dx725 HT (2 drawer + 1filling). .PVC Keyboard Tray . .Metal CPU Trolley. The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
143
-
-
... More
Workstation- Size (1200x600x1200)mm. ·67mm thk Sliding Tile Based Partition.Single Metal raceway cover at skirting level in Partition. Pin up & white board in partition above the tabletop. Table top made of 25mm thk Prelamin particle board with pvc edges. Pedestal of 400Lx 450Dx725 HT (2 drawer + 1filling). PVC Keyboard Tray . Metal CPU Trolley. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology.The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
55
-
-
... More
Mid Back Chair- Mid Back Chair Size (L) 590mm X (D) 660mm X (H) 1080mm. Nylon base chair with push back mechanism & Fix handle. Back & seat cover cushion chair uphlostered in fabric & adjustable armrest locks any position. Syncro mechenism with locking system and five star Nylon base with nylon casters. Seat & Back made up of 14mm thick boiling water proof plywood os ISI303. Chair rotates a full 360 degree in either direction for ease of motion. Standard on every executive with task chair & controls rate and ease with which chair reclines to different weight and strengths of users. Quick and easy adjustment regulated height of chair relative to floor. Back reclines at A 2-to-1 ratio to the seat. 5% post consumed recycled content & 30% total recycled content. The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.Color-Black
199
-
-
... More
Storage Cabinet- 3 Door Back Storage- Size (1200x400x1200)mm, Storage top made of 25mm thk and side of 15mm thk Prelamin particle board. Storage with openable shutter with 2 shelves and lock. Storge top & shutter color will be maple and storage side & skirting color will be Dark gray. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. Color-Maple & Dark Gray..The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
4
-
-
... More
Office Table with Side Unit- Table Top Size-( 1800L x 900D x 760H)mm with 50 MM table top thk & Side runner size- (1200L x 400D x 760H) with 35 MM thk. Straight line table with two wire manager,Mobile pedestal with 3 drawer/center lock,interchangeble side runner with 3 drawer with lock.one open shelf,one closed shutter with lock,key board trey & CPU trolley. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. Color-Wenge. The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
2
-
-
... More
High Back Chair with revolving. Size(Seat-510x480, Back-660x510, Height-Min.470mm Max.540mm) Chrome plated base with gas height adjustment and central tilting with single locking machenaism. Armrest with padding. Leatherette uphlostery has the look and feel of top grain leather. Cushion wtih lumber support for all day comfort. Chrome plated loop armrest with padded upholstery for extra comfort. chair rotates a full 360 degree in either direction for ease of motion. Standard on every executive & controls rate and ease with which chair reclines to different weight and strengths of users. Quick and easy adjustment regulated height of chair relative to floor. Look out tilt function when chair is in upright position. 5% post consumed recycled content & 30% total recycled content. Color-Black. The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
16
-
-
... More
Visitor Chair - Chair Size (W)590mm X (D)490mm X (H)980mm. Its moulded seat and indented back provide exceptional all-day support. Premium virgin foam sits atop a 14mm thick boiling waterproof plywood forming the moulded seat. This is then encased in deep black fabric upholstery with defined line seams that provide comfortable seating while adding depth to the high backrest. The powder-coated metal cantilever base provides extraordinary support for easy seating. The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
62
-
-
... More
Back Storage Cabinet- Storage Size (1200x400x750) mm. 3 Door shutter Storage top made of 25mm thk and side of 15mm thk Prelamin particle board. Storage with openable shutter with 2 shelves and lock. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
19
-
-
... More
Meeting Table - Meeting Table size-(2700x1800x750)mm with 25mm thk table top. The innovation modular design enables varius configration. An all wood conference table with minimalist look and basic functionality, ideal for meeting room & top comes with 25mm thik pre lam particle board & side panel 18mm thick prelam particle board & 2mm pvc edge banding with modesty given much needed ptimary and close interaction. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC. Color-Black Oak
1
-
-
... More
High Back Chair with revolving. Size(Seat-510x480, Back-660x510, Height-Min.470mm Max.540mm) Chrome plated base with gas height adjustment and central tilting with single locking machenaism. Armrest with padding. Leatherette uphlostery has the look and feel of top grain leather. Cushion wtih lumber support for all day comfort. Chrome plated loop armrest with padded upholstery for extra comfort. chair rotates a full 360 degree in either direction for ease of motion. Standard on every executive & controls rate and ease with which chair reclines to different weight and strengths of users. Quick and easy adjustment regulated height of chair relative to floor. Look out tilt function when chair is in upright position. 5% post consumed recycled content & 30% total recycled content. Color-Black. The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
2
-
-
... More
Mid Back Chair- Mid Back Chair Size (L) 590mm X (D) 660mm X (H) 1080mm. Nylon base chair with push back mechanism & Fix handle. Back & seat cover cushion chair uphlostered in fabric & adjustable armrest locks any position. Syncro mechenism with locking system and five star Nylon base with nylon casters. Seat & Back made up of 14mm thick boiling water proof plywood os ISI303. Chair rotates a full 360 degree in either direction for ease of motion. Standard on every executive with task chair & controls rate and ease with which chair reclines to different weight and strengths of users. Quick and easy adjustment regulated height of chair relative to floor. Back reclines at A 2-to-1 ratio to the seat. 5% post consumed recycled content & 30% total recycled content. The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.Color-Black
8
-
-
... More
SLOTTED ANGLE RACK - Slotted Angel Rack (L)900MM X (D)450MM X (H)2MTS SLOTTED ANGLE RACKS WITH 7 PANELS ANGLE : 40 X 40 X 2MM PANELS: 20 GAUGE. The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
44
-
-
... More
Table with side unit return- Table Size(1500x600x750)mm & Side runner Size(750x400x750)mm. Table made of 25mm thk pre lam particle board with edge banding. Table top supported with side panel & fron panel. Kyeboard tray & cpu trolly. Table top with wire manager & interchangable side runner with fixed pedestal of 3 drawers. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
4
-
-
... More
Free Standing Table - TABLE SIZE:1500LX 600DX 750HT. · Table top made of 25mm thk Prelamin particle board with pvc edges. · Tabletop supported with 18mm thk side panel & Modesty Panel in Prelaminated Particle Board with Pvc edge banding side. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
500
-
-
... More
Cantiliver Chair - Chair Size - Maximum Height - 900mm, Outer Dimension - 560mm & seat Depth - 440mm. Fixed cantiliver chair & armrest with pading & metal base. Fixed cushion chair upholstered in fabric. Fixed design handle. Deep cushioned back and seat conform to body contours for proper alignment, posture and all-day comfort. Seat & Back made up of 14mm thick boiling water proof plywood os ISI303. 5% post consumed recycled content & 30% total recycled content. The Product/Company Should be Certified Company BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
900
-
-
... More
Steel Almirah - Almirah Size (L)915MM X (D)485MM X (H)1980MM. OFFICE STOREWELL WITH 4 SHELVES. GAUGE: BODY: 22 GAUGE ,DOORS: 20 GAUGE. The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
18
-
-
... More
Office Table with Side Unit Return - Table Top Size (L)2200mm X (D)900mm X (H)755mm and with Side Unit Table Size (2200x1800x750)mm. The Table made of PLPB with matt finish. Made with a combination of engineered wood, this gorgeous desk has contrasting panels in black for a contemporary look. Coupled with a runner and storage for your files and cabinets, the Clint is a desk meant for the discerning tycoon. With a warm walnut finish, the dual tone finish of the desk adds to its overall style and finish. With an option of regular drawers and shuttered glass storage units you can take a pick of which unit suits you the best. The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
4
-
-
... More
High Back Revolving Chair- Chair Size (W)660mm X (D)500mm X (H)1265mm. Made From High-Density Foam, The Sink-In Cushions And The Cradling Backrest Provides Contouring Comfort For All-Day Seating. The Soft To Touch Premium Leatherette Upholstery Add Elegance To Its Look While Also Making It Stain & Fade Resistant. Features Such As Synchro Multi-Locking Mechanism, Pneumatic Height Adjustment, Tilt Tension Control, Etc, Let You Find Your Ergonomic Position With Ease. The Pneumatic Height Adjustment Along With The Thick Padded Headrest And Armrest Further Let You Sit In Absolute Comfort. A Strong Chrome Base Supports The Structure While The 360 Swivel And 55Mm Castors. The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
4
-
-
... More
Back Unit- Back unit Size (1600x450x800)mm. Locable side runner with Openable shutter & shelf. made of 25mm thk pre lam particle board with edge banding. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm. The cabinet boast of 2 vertically stacked shelves to keep your files and documents safe and dust free. The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
2
-
-
... More
Visitor Office chair. A contemporary design with an all black finish, the chair is a staple in every office setting. A double padded cushion encased in an all black leatherette makes for one comfy seat. The side padding and the headrest sit snugly providing added lumbar support to the user. Available in multiple formats to suit your individual needs, take your pick from the options available with customisation offered on single and bulk purchase Material & Sub type Leatherette Colour Family Black Dimension (W)610mm X (D)505mm X (H)990mm Back Type Low Back Base Cantilever Frame Base Type Cantilever Maximum Seating Height19" Wheels Included No Finish Matte Style Contemporary. The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
9
-
-
... More
3 Seater Sofa - 3 Seater Sofa Size - (L)1760mm X (D)720mm X (H)845mm. Fine Finesse. The Jesse sofa is what contemporary style looks like. This sofa is sleek and comfortable. The sleek frame is finished in a rich polish with split panel seating. The back and seat have medium to firm cushioning for better posture. The Leg of Solid wood in glossy finished. Frame used is treated American pine wood with termite free & borer free. Soft & comfortable cushion with high density and resilient foam. Frame used is Treated american pine wood & the wood used in sofa has been 8% moisture, this prevents the wood from wrapping and bending. all wood used is termite free and borer free. Foam of sofa comfortable cushion with high density and resilent foam. all apholstry materials used in specially designed.Color-Camel/Green. The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC
21
-
-
... More
2 Seater Sofa - 2 Seater Sofa Size:(L)1200mm X (D)720mm X (H)845mm. Fine Finesse. The Jesse sofa is contemporary style looks like. This sofa is sleek and comfortable. The sleek frame is finished in a rich polish with split panel seating. The back and seat have medium to firm cushioning for better posture. The Leg of Solid wood in glossy finished. Frame used is treated American pine wood with termite free & borer free. Soft & comfortable cushion with high density and resilient foam. Frame used is Treated american pine wood & the wood used in sofa has been 8% moisture, this prevents the wood from wrapping and bending. all wood used is termite free and borer free. Foam of sofa comfortable cushion with high density and resilent foam. all apholstry materials used in specially designed.Color-Camel/Green. The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
1
-
-
... More
Wooden Center Table - Center Table (L)1130mm X (W)630mm X (H)410mm. The centre table is made keeping your comfort in mind. The sheen on the glass table top will ensure you are the envy of many a neighbour. Inlaid onto a solid wood frame that slopes inward, the table is a gorgeous piece of furniture to highlight your living room. The turned wooden legs are sleek and sturdy providing the table with its support. The wood work below the glass provides the glass with a focal point and some support. Add volumes of style to your living room with the Hopper centre table. The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
30
-
-
... More
Compactor - Compactor Size DFM 2700x900x2100- 04 Nos, SFF 2700x450x2100- 01 Nos. SFM 2700x450x2100-1 No. Base Frame: Base Frame will be made out of ISMC 75x40 with 4 Nos. base wheels fabricated from solid steel round with groove for self alignment to prevent derailment of the unit for 2700mm long unit.Vertical Panel: Vertical Panel of size 375/450x2040 made of 1 mm CRC Sheet.Storage Level: Our unique 8 bend Shelves are made out of 1mm CRC Sheet for bearing maximum load. Clips: Boltless Electroplated Clips are used for resting of storage panels for easy fixing & easy adjustment of loading level. Individual lock: Each mobile unit consists of an individual lock for safety so that while working no one operates the unit. Central Lock: This single central lock is provided to lock the whole unit into single one compartment to save you from searching numerous keys. Center Partition: These are made out of 0.8mm CRC Sheet to give maximum stability & strength to the whole unit.Drive: The drive assembly consists of Polyurethane steering wheel mounted on double Ball Bearings assembly along with combination of gear ratio for free movement.Track: The mobile rack will move on two nos. tracks consisting of 20mm round bright bar for frictionless movement of units.
1
-
-
... More
Office Table Size(1200x600x750)mm. Table made of 25mm thk pre lam particle board with edge banding & wire manager. Table top supported with side panel & front panel & Keyaboard Tray. Pedestal Size (400x450Dx725HT)mm. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. Color-Maple & Dark Gray . The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
20
-
-
... More
High Back Chair - Chair Size (L) 600mm X (D) 660mm X (H) 1,275mm. Back & seat cover cushion chair uphlostered in fabric. Syncro mechenism with locking system and five star chrome base with nylon casters. Seat & Back made up of 14mm thick boiling water proof plywood os ISI303. Chair rotates a full 360 degree in either direction for ease of motion. Standard on every executive with task chair & controls rate and ease with which chair reclines to different weight and strengths of users. Quick and easy adjustment regulated height of chair relative to floor. Back reclines at A 2-to-1 ratio to the seat. 5% post consumed recycled content & 30% total recycled content. The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
20
-
-
... More
Visitor Chair - Chair Size (W)595mm X (D)510mm X (H)875mm. Multi-purpose fixed chair,Metal frame,PU Padding on armrest. Cushion upholstery in leatherette with four leg metal legs with matt finish. The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
49
-
-
... More
1 Seater Sofa - 1 Seater Sofa Size -(W)640mm X (D)720mm X (H)845mm. Fine Finesse. The Jesse sofa is what contemporary style looks like. This sofa is sleek and comfortable. The sleek frame is finished in a rich polish with split panel seating. The back and seat have medium to firm cushioning for better posture. The Leg of Solid wood in glossy finished. Frame used is treated American pine wood with termite free & borer free. Soft & comfortable cushion with high density and resilient foam. Frame used is Treated american pine wood & the wood used in sofa has been 8% moisture, this prevents the wood from wrapping and bending. all wood used is termite free and borer free. Foam of sofa comfortable cushion with high density and resilent foam. all apholstry materials used in specially designed.Color-Camel/Green. The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC
22
-
-
... More
Corner Table- Corner Table (Dia) 390mm X(H)460mm The sleek compact table made of solid wood has a touch of style. Perfectly crafted slim tabletop & miniature design.Base is made of exquisitely crafted three curved leg base. Stylish base of the table brings an lavish look to the table.The rich finish of table enhances the table. The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
22
-
-
... More
Office Table with side unit Return- Table Size (L-2400xD-1025xH-770)mm & Side Runner Size (L-1200xD-595xH-770)mm. Table with interchangable side unit return size 2225mm. Table & side unit return made of medium density fibre board with veneer finish. Thikness of table top 100mm, Side panel & front modesty 90mm with pvc look. PVC writing pad on table top & 1 Interchangable mobile pedestal of 3 drawers with central lock. Side Runner top thikness in 90mm & thikness of side runner panel 70mm. 2 Wire manager in table & 1 wire manager in side runner & 1 shelves with keyboard tray. This precise Boss's Desk is designed with superb quality. We can find on the ample design, beautiful color, elements large space and modernized. Functional and stately, with a sturdy design style, this L shape desk is sure to make a dramatic statement in the office. Featuring a cherry finish, with delicate panel moulding and a fantastic size.The frame of the table gives the great look with panel upholstered wth PVC material which gives the leatherette look. The office desk comes with the side runner having enough storage space. Pedestal having three drawers to store essential. Drawers have the stylish handle which enhance the look.This piece will be an all-encompassing workspace in the office in your home for years to come. Color-Cherry. The Product/Company Should be Certified Company BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
2
-
-
... More
Leather Chair- Size(Seat-510x500, Back-770x600, Height-Min.500mm Max.580mm)High Back Granmaster leather Chair with revolving. Wooden base with gas height adjustment and central tilting with single locking machenaism. Wooden arms with leather pading. Soft Touch leather, side bolsters and lumber support ensure comfort during long working hours. Fixed Armrest on both sides eases the pressure off the arms. Headrest is padded with soft and thick cushion & armrest crafted from mahogany wood & 5 star base. 5% post consumed recycled content 30% total recycled content. Color-Black.The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
2
-
-
... More
Back Unit - Back Unit Size (L)1200mm X (D)400mm X (H)850mm. Material & Subtype Engineered Wood - Medium Density Fibre Board. Crafted with elegance from premium materials, the matching walnut storage unit is complete with panelled shelves and an enclosed cabinet for keeping all your important documents and files. The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
13
-
-
... More
Wooden Fixed Visitor Chair - Chair Size(L-610xD-490xH-990)mm. Fixed chair with wooden frame & base. Arms with leater padding and glossy finish wooden. Seat & Back in leather upholostery. Color-Black. The Product/Company Should be Certified Company BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
18
-
-
... More
Wooden Side Table - Side Table (L)680mm X (W)530mm X (H)460mm The Side table is made keeping your comfort in mind. The sheen on the glass table top will ensure you are the envy of many a neighbour. Inlaid onto a solid wood frame that slopes inward, the table is a gorgeous piece of furniture to highlight your living room. The turned wooden legs are sleek and sturdy providing the table with its support. The wood work below the glass provides the glass with a focal point and some support. Add volumes of style to your living room with the Hopper centre table. The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
3
-
-
... More
Table with side unit return- Table Size(1500x750x750)mm & Side runner Size(750x400x750)mm. Table made of 25mm thk pre lam particle board with edge banding. Table top supported with side panel & fron panel. Kyeboard tray & cpu trolly. Table top with wire manager & interchangable side runner with fixed pedestal of 3 drawers. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
3
-
-
... More
3 Seater Sofa- Sofa Size( (L)1905mm X (D)890mm X (H)870mm)mm. Arm height 620mm, Seat depth 510mm, Back Height 460mm. Frame used is treated American pine wood with termite free & borer free. Soft & comfortable cushion with high density and resilient foam. Frame used is Treated american pine wood & the wood used in sofa has been 8% moisture, this prevents the wood from wrapping and bending. all wood used is termite free and borer free. Foam of sofa comfortable cushion with high density and resilent foam. all apholstry materials used in specially designed. all plywood used in M R Garde. Color-Black/Brown.The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
6
-
-
... More
1 Seater Sofa- Sofa Size (W)960mm X (D)890mm X (H)870mm. Arm height 620mm, Seat depth 510mm, Back Height 460mm. Frame used is treated American pine wood with termite free & borer free. Soft & comfortable cushion with high density and resilient foam. Frame used is Treated american pine wood & the wood used in sofa has been 8% moisture, this prevents the wood from wrapping and bending. all wood used is termite free and borer free. Foam of sofa comfortable cushion with high density and resilent foam. all apholstry materials used in specially designed. all plywood used in M R Garde. Color-Black/Brown.The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
2
-
-
... More
Providing and supplying reception table having dimension 3000 mm Arc Length x 750mm D x 750 / 1200 mm Ht. The table top is made of 12 mm thick Corian in white colour and has a depth of 750 mm. The table top is at 1200 mm height from floor for half length and also at 7:50 mm height from floor for rest half of length. The table structure is made from 15 mm thick bwp ply fixed on wooden frame from both sides. The ply is covered by laminate sheet 1 mm thick in colour as approved by engineer incharge. The table has skirting of 100 mm height and the laminated panel is provided with LED Cove lighting in the gap between skirting and vertical laminated panel. Table is also provided with a laminated three drawer pedestal 400 mm length by 450 mm depth by 6:35 mm height under the working counter. There is provision for wire management for data and electrical wires through a horizontal raceway under the table top on the user side. All colours, dimensions as per the directions of engineer incharge.
1
-
-
... More
V Shape Meeting Table - Meeting Table size-(18100x3250x750)mm with 25mm thk table top. The innovation modular design enables varius configration. An all wood conference table with minimalist look and basic functionality, ideal for meeting room & top comes with 25mm thik pre lam particle board & side panel 18mm thick prelam particle board & 2mm pvc edge banding with modesty given much needed ptimary and close interaction. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC. Color-Black Oak
1
-
-
... More
High Back Leather Chair - Chair Size (W)650mm X (D)510mm X (H)1300mm. Meet the Alpha, the prized office chair amongst them all. True to its name, the Alpha is a leader standing tall in this High Back variant with a chrome vaulted base and sleek chrome armrests. The chair boasts of a padded headrest along with the back, cushions and armrest panels are upholstered in Burgundy Leather for a premium look and feel. The Product/Company Should be Certified Company BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
2
-
-
... More
Medium Back Chiar- Its Classic All-Black Look With Soft Black Fabric Upholstery . The Deep-Cushioned Back And Seat Conform To The Natural Curvature Of The Spine For Optimum Ergonomics And Lumbar Support. The Synchro-Single Locking Mechanism Along With The Tilt Tension Control, Lets You Find Your Ergonomic Position With Ease. The Pneumatic Height Adjustment Along With The Sturdy Armrest Provide Further Comfort. A Strong Nylon Base Supports The Structure, While The 55Mm Castor Wheels And A 360-Degree Swivel Provide Swift Yet Stable Movement.Dimension (L) 550mm X (D) 650mm X (H) 1050mm,Seat depth 470mm Back Height 515mm.Back reclines at A 2-to-1 ratio to the seat. 5% post consumed recycled content & 30% total recycled content.Material Upholstery Material Fabric,Seat Material Fabric,Finish Matte,Colour Family Black. The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
50
-
-
... More
Office Table with Side Unit - Table Size-(L)2000mm X (D)1800mm X (H)755mm No Of Drawers3 No Of Shelves 5 Add Ons Interchangeable Side Runner Finish Matte Size Large Style Contemporary-is a suave . Table top thk 40mm Made with a combination of engineered wood, this gorgeous desk has contrasting panels in black for a contemporary look. Coupled with a runner and storage for your files and cabinets, the Clint is a desk meant for the discerning tycoon. With a warm walnut finish, the dual tone finish of the desk adds to its overall style and finish. With an option of regular drawers and shuttered glass storage units you can take a pick of which unit suits you the best.The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
2
-
-
... More
3 Seater Sofa- 3 Seater Sofa Size (L)1830mm X (D)760mm X (H)790mm. Frame used is treated American pine wood with termite free & borer free. Soft & comfortable cushion with high density and resilient foam. Frame used is Treated american pine wood & the wood used in sofa has been 8% moisture, this prevents the wood from wrapping and bending. all wood used is termite free and borer free. Foam of sofa comfortable cushion with high density and resilent foam. all apholstry materials used in specially designed. all plywood used in M R Garde. Color-Black/Brown.The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
8
-
-
... More
1 Seater Sofa- 1 Seater Sofa Size (L)790mm X (D)760mm X (H)790mm. Frame used is treated American pine wood with termite free & borer free. Soft & comfortable cushion with high density and resilient foam. Frame used is Treated american pine wood & the wood used in sofa has been 8% moisture, this prevents the wood from wrapping and bending. all wood used is termite free and borer free. Foam of sofa comfortable cushion with high density and resilent foam. all apholstry materials used in specially designed. all plywood used in M R Garde. Color-Black/Brown.The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
12
-
-
... More
High Back Leather Chair - Chair Size (W)650mm X (D)510mm X (H)1300mm. Meet the Alpha, the prized office chair amongst them all. True to its name, the Alpha is a leader standing tall in this High Back variant with a chrome vaulted base and sleek chrome armrests. The chair boasts of a padded headrest along with the back, cushions and armrest panels are upholstered in Burgundy Leather for a premium look and feel. The Product/Company Should be Certified Company BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
1
-
-
... More
Office Table with Side Unit Return - (L)2000mm X (D)950mm X (H)760mm. The Meridian Desk is a dream come true for any entrepreneur and business man who is looking for a regal desk that suits his needs. Crafted with elegance from premium materials the desk comes in 4 sizes with a polished shine. The glossy walnut finish adds value to the desk's design. The desk table top carries a leather folio with an inbuilt wire management system for easy access. The desk has slender curves and a stylish geometric pattern that flows from end to end. Coupled with the desk is a movable runner and pedestal in which storage space is in abundance for stowing away your important files and folders.Define your working space with the Meridian office series.The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC. Color- Brown - Walnut
10
-
-
... More
Free Standing Table - TABLE SIZE:1500LX 600DX 750HT. · Table top made of 25mm thk Prelamin particle board with pvc edges. · Tabletop supported with 18mm thk side panel & Modesty Panel in Prelaminated Particle Board with Pvc edge banding side. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
120
-
-
... More
Table - Table Size(1200x600x760)mm. Table made of 30mm thk pre lam particle board with edge banding & wire manager. Table top supported with side panel & front panel & Keyaboard Tray. Fixed Pedestal of three drawer Size (400x450x725)mm. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & iARide (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product CoARistency, fade resistance lamination best International Technology.The Product/Company Should be Certified BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC. Color-Maple & Dark Gray
5
-
-
... More
Cantiliver Chair - Chair Size - Maximum Height - 900mm, Outer Dimension - 560mm & seat Depth - 440mm. Fixed cantiliver chair & armrest with pading & metal base. Fixed cushion chair upholstered in fabric. Fixed design handle. Deep cushioned back and seat conform to body contours for proper alignment, posture and all-day comfort. Seat & Back made up of 14mm thick boiling water proof plywood os ISI303. 5% post consumed recycled content & 30% total recycled content. The Product/Company Should be Certified Company BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC.
250
-
-
... More
Double Sided Book Rack with the Dimensions -Width 900mm, Height: 1850mm, Depth: 600mm, Rigid Knockdown construction. Construction, Material- CRCA0.8mmThickness, Finish-EpoxyPolyester Powder coated to the thickness of 50 microns (+/-10).Number of Adjustable shelf:-Five adjustable shelves on one side (Total 12 Loading levels). UniformlyDistributed Load Capacity per each shelf is 80 Kgmaximum. Label holder & range indicator-Label Holder & Range indicator on eachmain unit for inserting labels. The Product/Company Should be Certified Company BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC
80
-
-
... More
Table-Size : 1500L x 900W x 1050Ht.25mm thk. Prelam Particle board tabletop with PVC edge banding.Tabletop supported with Powder coated "C" shape metal legs of size 50mm x 50mm and connectors of size 50mm x 50mm. The Product/Company Should be Certified Company BIFMA, ISO-50001,Green Guard, Green PRO, Sedex, AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC
25
-
-
... More
HVAC WORK
-
-
-
... More
AIR COOLDED VARIABLE REFRIGERANT VOLUME/FLOW AIR CONDITIONING SYSTEM
-
-
-
... More
Supply, Installation, testing and commissioning of air cooled Variable Refrigerant Volume/Flow modular type air-conditioning system Invertor Controlled with step less modulation complete with indoor and outdoor units, individual remote controller and centralized controller, interconnected refrigerant piping ,full charge of refrigerant gas & oil, control cabling etc.as per detail given in specifications and having following items: Refrigerant to be used shall be - R - 410 A.
-
-
-
... More
OUTDOOR UNIT
-
-
-
... More
Supply, Installation, testing and commissioning of Both Cooling & Heating Modular type outdoor units suitable to operate at 415 ± 10 % volt, 50 Hz, 3 phase AC supply and suitable for cooling & Heating application by using 100 % inverter driven capacity control compressors (Hermetically sealed scroll type) with stepless modulation complete with special acryl precoated heat exchanger, minimum two compressors for above 14 HP modules, microprocessor based Controller, top discharge type condensing unit(s), low noise condenser fan , auto check function for connection error in display panel, auto address setting as per specifications. The COP at AHRI conditions shall not be less than 3.8 . Complete Set (Indoor and Outdoor) of equipment testing shall be done in the presence of client representative at AHRI Conditions without any extra cost. The units shall be complete with necessary mounting frames and capacity as mentioned below and as per specification.
-
-
-
... More
The cost should include the following :
-
-
-
... More
Nitrogen pressure testing for refrigerant pipe leakages & flushing during installation & after commissioning between IDU & ODU with flare nuts. Refrigerant gas & oil charging as per OEM standard.
-
-
-
... More
Necessary corrosive treatment of copper coil of the ODU with Aluminium hydroxide, 25 microns thickness or equivalent coating as per manufacturer standard to protect from corrosion, sulphur and other chemical contaminants present in the air. The coating should be done in the presence of OEM representative. The coating shall be carried-out by the authorized applicator of coating manufacturer.
-
-
-
... More
Note : The ODU provided with cowl duct for exhaust air should have minimum 5 mm ESP. GI wire mesh (minimum 16 SWG thickness) type bird screen with framing at the Mouth of exhaust air Cowl duct of Outdoor Units, where ever required.
-
-
-
... More
ODU Units Mounted on MS Frame/Masonry Pedestal with required anti-vibration mounting.
-
-
-
... More
Note For Computer Lab-AC Machine will Be Cooling Only
-
-
-
... More
12 HP (1x12 HP)
3
-
-
... More
14 HP (1x14 HP)
1
-
-
... More
16 HP (1x16 HP)
2
-
-
... More
18 HP (1x18 HP)
3
-
-
... More
20 HP (1x20 HP)
3
-
-
... More
Indoor VRV/VRF Units
-
-
-
... More
Supply, Installation, testing & commissioning of metallic body indoor (Hi-Wall, Cassette & Ducted) Units of following minimum capacity suitable to operate at 230+/-10% volt, 50 HZ, 1 phase power supply and having multispeed motor, blower, coil section with DX coil, outer cabinet, drain pan, drain pump, drain water lift-up mechanism, insulation, pipe connections, fittings & required cable to connect indoor unit to MCB etc. complete in all respect and as per specification.
-
-
-
... More
Indoor Units powder coated MS Hanging arrangement/wall Brackets with required anti-vibration mounting.
-
-
-
... More
CEILING MOUNTED 4-WAY/1-WAY CASSETTE UNITS
-
-
-
... More
Supply, installation, testing and commissioning of following minimum capacity 1-Way/4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.
-
-
-
... More
Indoor Units powder coated MS Hanging arrangement/wall Brackets/Spring Isolators with required anti-vibration mounting.
-
-
-
... More
4-Way Cassette Unit
-
-
-
... More
1.0 TR (325 CFM)
1
-
-
... More
1.2 TR (400 CFM)
1
-
-
... More
1.5 TR (550 CFM)
1
-
-
... More
2.0 TR (700 CFM)
5
-
-
... More
2.5 TR (800 CFM)
2
-
-
... More
3.0 TR (1050 CFM)
1
-
-
... More
WALL MOUNTED HIGH WALL TYPE
-
-
-
... More
Supply, installation, testing and commissioning of following minimum capacity VRV/VRF High wall type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, cord less remote control, drain pan, necessary accessories etc., suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply, complete as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.
-
-
-
... More
Indoor Units powder coated MS Hanging arrangement/wall Brackets/Spring Isolators with required anti-vibration mounting.
-
-
-
... More
1.3 TR (425 CFM)
1
-
-
... More
2.1 TR (625 CFM)
1
-
-
... More
CEILING SUSPENDED DUCTED TYPE UNITS
-
-
-
... More
Supply, installation, testing and commissioning of following minimum capacity and external static pressure VRF/VRV ceiling mounted ductable type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration isolators, drain pump, drain pan, fire retardant non-porous double layer flexible connection, other necessary supports etc., suitable for operation on single phase AC supply 230 V± 10%, 50 Hz complete as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.
-
-
-
... More
Indoor Units powder coated MS Hanging arrangement/wall Brackets/Spring Isolators with required anti-vibration mounting and Fire Rated Flexible Connection.
-
-
-
... More
Mid Static Ductable units (minimum 50 pascal external static pressure)
-
-
-
... More
1.0 TR (375 CFM)
3
-
-
... More
1.3 TR (450 CFM)
1
-
-
... More
1.5 TR (525 CFM)
2
-
-
... More
Mid Static Ductable units (minimum 100 pascal external static pressure)
-
-
-
... More
2.0 TR (700 CFM)
1
-
-
... More
2.5 TR (900 CFM)
3
-
-
... More
3.0 TR (1200 CFM)
4
-
-
... More
High Static Ductable units (minimum 150 pascal external static pressure)
-
-
-
... More
4.0 TR (1400 CFM)
3
-
-
... More
4.5 TR (1800 CFM)
4
-
-
... More
5.5 TR (2100 CFM)
1
-
-
... More
CEILING SUSPENDED TREATED FRESH AIR UNITS
-
-
-
... More
Supplying, installing, testing and commissioning of Ceiling Suspended Treated Fresh air Units each complete with coil, filter, etc. Air conditioners with evaporating unit comprising of cooling coil, blower with motor and 220 volt, 1 phase, 50 Hz, AC supply all as per specifications. The rate will also include entire drain pipes and nothing extra shall be payable. 4.5 TR (600CFM)
1
-
-
... More
Refrigerant Joints and Headers
-
-
-
... More
Supply, Installation, Testing and Commissioning of copper Y-Joints sets, distributer and headers, suitable for various sizes of gas and liquid line of VRF System complete as required for the above system.
38
-
-
... More
Corded/Cordless Remote Controller
-
-
-
... More
Supply, Installation, testing and commissioning of self diagnostic type Corded/Cordless remote controllers for operation of indoor units.
36
-
-
... More
Central Remote Controller
-
-
-
... More
Supply, Installation, testing & commissioning of Main intelligent central controller with Scheduled Timer system Touch screen/Gate Way Type suitable for groups of indoor units to operate, monitor, on/off, cyclic operation setting, temperature setting etc. The controller shall be able to control up to minimum nos. of indoor units with zoning option as mentioned below. The controller shall have wide screen user friendly colour LCD Touch screen display and can be wired by a non-polar transmission cable The CRC shall be provided with suitable size metallic box with lock arrangement. The controller shall be integrated to BMS system thru software for monitoring & controlling of all above parameters including start/ stop of each indoor / outdoor unit. All necessary interface cards / units should be supplied as a part of the system to integrate to the BMS Software. Maximum 64 Nos of Indoor Units
1
-
-
... More
Air Cooled Ductable Unit
-
-
-
... More
Supplying, installing, testing and commissioning of Air Cooled Ducted Air conditioners suitable for R410A or eco-friendly refrigerant with evaporating unit comprising of cooling coil, blower with motor in Metallic (Steel) casing and condensing unit comprising hermetically sealed scroll compressor, condenser coil, and propeller fan. Unit shall be complete with controls, interconnecting copper refrigerant piping with insulation, Expansion kit to connect with DX AHU, and electrical cabling etc. between evaporative and condensing unit, refrigerant gas and oil and complete as per specifications. The unit shall be suitable for operating on 240 volt, 1 phase, 50 Hz AC supply with five star energy rating. The units shall be suitable for chorded remote operation. The refrigerant piping & cabling shall run in PVC sleeve Steel supporting structure for outdoor units suitable for wall mounting / floor mounting.
-
-
-
... More
Providing, fixing and testing of copper refrigerant piping of appropriate sizes duly insulated with nitrile rubber insulation of 19 mm thickness. The pipes plus nitrile rubber insulation and cable are to be covered with PVC flexible conduits for protection.
-
-
-
... More
Note: Providing and fixing of Powder coated M.S. angle iron frame work/Masonry Pedestal with required anti-vibration mounting for outdoor unit is also included in the above scope. Contractor to submit design/Scheme for Iron frame and obtain approval of engineer/employer before proceeding purchase & installation.
-
-
-
... More
Nitrogen pressure testing for refrigerant pipe leakages & flushing during installation & after commissioning between IDU & ODU with flare nuts. Refrigerant gas & oil charging as per OEM standard.
-
-
-
... More
Necessary corrosive treatment of copper coil of the ODU with Aluminium hydroxide, 25 microns thickness or equivalent coating as per manufacturer standard to protect from corrosion, sulphur and other chemical contaminants present in the air. The coating should be done in the presence of OEM representative. The coating shall be carried-out by the authorized applicator of coating manufacturer.
-
-
-
... More
4.0 TR (1600 CFM) Ductable Split Unit
4
-
-
... More
5.5 TR (2200 CFM) Ductable Split Unit
1
-
-
... More
8.5 TR (3400 CFM) Ductable Split Unit
5
-
-
... More
11.0 TR (4400 CFM) Ductable Split Unit
5
-
-
... More
REFRIGERANT PIPING
-
-
-
... More
Supply, fixing, testing and commissioning of interconnecting soft/hard drawn copper refrigerant pipe work of following outer diameter duly insulated with fire rated class'O' closed cell elastomeric nitrile rubber insulation (19mm/13mm thick) between indoor & outdoor units & protected with 26 G aluminium sheet cladding as per specifications. All piping should be laid on Galvanized/Powder Coated tray supported by Galvanized M S Hangers & Clamps and all external piping shall run in covered cable trays. The rate includes all the items required to complete the piping work and nothing extra should be payable except the cable tray.
-
-
-
... More
Vaccumiazation & Nitrogen pressure testing for leakages & flushing during installation & after commissioning between IDU & ODU.
-
-
-
... More
Civil Work such as wall hole making , wall chiselling ,refilling of chiselling part with mortar etc. as per site condition.
-
-
-
... More
Covering of External refrigerant piping insulation shall be done with 26 G aluminium sheet cladding as per specifications.
-
-
-
... More
Internal Refrigerant piping insulation shall be covered with Aluminium Foil as per specifications.
-
-
-
... More
6.4 mm outer dia Soft Drawn with Tube Thickness-1.2mm ( Insulation-19 mm )
58
-
-
... More
9.5 mm outer dia Soft Drawn with Tube Thickness-1.2mm ( Insulation-19 mm )
105
-
-
... More
12.7 mm outer dia Soft Drawn with Tube Thickness-1.2mm ( Insulation-19 mm )
103
-
-
... More
15.9 mm outer dia Soft Drawn with Tube Thickness-1.2mm ( Insulation-19 mm )
108
-
-
... More
19.1 mm outer dia Hard Drawn with Tube Thickness-1.2mm ( Insulation-19 mm )
64
-
-
... More
22.2 mm outer dia Hard Drawn with Tube Thickness-1.2mm ( Insulation-19 mm )
54
-
-
... More
25.4 mm outer dia Hard Drawn with Tube Thickness-1.2mm ( Insulation-19 mm )
18
-
-
... More
28.6 mm outer dia Hard Drawn with Tube Thickness-1.2mm ( Insulation-19 mm )
58
-
-
... More
31.8 mm outer dia Hard Drawn with Tube Thickness-1.62mm ( Insulation-19 mm )
8
-
-
... More
34.9 mm outer dia Hard Drawn with Tube Thickness-1.62mm ( Insulation-19 mm )
27
-
-
... More
38.1 mm outer dia Hard Drawn with Tube Thickness-1.62mm( Insulation-19 mm )
10
-
-
... More
41.3 mm outer dia Hard Drawn with Tube Thickness-1.62mm( Insulation-19 mm )
14
-
-
... More
AIR CONDITIONING EQUIPMENTS LOW SIDE
-
-
-
... More
DOUBLE SKIN FLOOR MOUNTED AIR HANDLING UNIT WITH PRE-FILTER
-
-
-
... More
Supply, Installation, Testing and commissioning of factory built floor mounted chilled water double skin type horizontal/vertical air handling units made of 25mm thick panels consisting of pre plasticized G.I. casing of thickness 0.8mm outside layer and 0.8 mm inside layer with polyurethane foam (PUF) insulation factory injected between them by injection moulding machine, complete with blower section with blower suitable for static pressure as required, minimum 2 bend GSS/ PVC eliminators, cooling coil section with aluminium finned copper tubes (tubes thickness not less than 0.5mm) cooling coil of 4/6 row deep, filter section with 50mm thick metal viscous/ washable synthetic type air prefilters, belt drive package with TEFC drive motor of efficiency class IE3 suitable for 415 ± 10% volts, 50Hz, 3 Phase AC supply suitably designed for variable frequency drive applications, drain connections, stainless steel (18G) drain pan with PUF insulation, 150 mm dia. dial type pressure gauges (2 nos.)and industrial type thermometers (2 nos.) at the inlet and outlet of coil, auto purge valve wherever required, necessary vibration isolation arrangement etc. complete as per specification and of following capacities
-
-
-
... More
The cooling coil made of Aluminium finned Copper tube with coil section, pre-filter section with non woven synthetic media of 10 micron particle size with an efficiency of 90%, complete with motor, belt drive etc. without face and bypass dampers. The AHU panels shall be insulated with 25mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section with starter panel. The complete AHU shall conform to standard specification. The face velocity across cooling coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows:
-
-
-
... More
Chemical, Biological and Radiological (CBR) filtration with dia-electric media with efficency not less than 90 % of PM .1 micron alongwith 95 % of gases contamination removal with 350 mm depth (CBR- Certification IACS for filteration efficiency, Green Pro, ISO, FDA & RoHS - refer details specifcation for CBR Filter for compliance) in the AHU along with necessary frames, Air Decontamination Chamber in the supply air/ plenum comprising of nanoX coating plasmOX having EPA approved metallic compound of five metals targeted on Alumninum matrix cell duly enclosed by a poly quartz casing tube with the capability to produce ionized Hydroxyl oxidizers having required wattage for different CFM's. The Equipment shall a microbiological testing report against Bacteriophage (MS-2 FDA) surrogate SARS Cov-2 with a minimum efficiency of 99 percent along with a Virology report from ICMR approved lab with an minimum efficiency of 99 percent against SARS COV2 within 45 minutes
-
-
-
... More
5,000 CFM (8500 CMH), 50 mm St. Pr., 6 Row CC
1
-
-
... More
6,000 CFM (10200 CMH), 50 mm St. Pr., 4 Row CC
2
-
-
... More
6,000 CFM (10200 CMH), 50 mm St. Pr., 6 Row CC
1
-
-
... More
7,000 CFM (11900 CMH), 50 mm St. Pr., 4 Row CC
2
-
-
... More
7,000 CFM (11900 CMH), 50 mm St. Pr., 6 Row CC
2
-
-
... More
8,000 CFM (13600 CMH), 50 mm St. Pr., 4 Row CC
2
-
-
... More
8,000 CFM (13600 CMH), 50 mm St. Pr., 6 Row CC
1
-
-
... More
9,000 CFM (15300 CMH), 50 mm St. Pr., 4 Row CC
1
-
-
... More
9,000 CFM (15300 CMH), 50 mm St. Pr., 6 Row CC
1
-
-
... More
12,000 CFM (20400 CMH), 50 mm St. Pr., 4 Row CC
1
-
-
... More
DOUBLE SKIN FLOOR MOUNTED AIR HANDLING UNIT WITH FINE FILTER
-
-
-
... More
Supply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit floor mounted fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm Galvanised steel sheet inside with fan & fan section, fan motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 4/6 row cooling & 2 row heating coil made of Aluminium finned Copper tube, Copper header with coil section, pre-filter section with non woven synthetic media of 10 micron particle size with an efficiency of 90%, fine filter section with filters of non woven synthetic media of 5 micron particle size, polished stainless steel drain pan made out of 22 G sheet duly insulated complete with motor, belt drive package, guard etc. without face and bypass dampers. The AHU panels shall be insulated with 23mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only with starter panel. The complete AHU shall conform to standard specification. The face velocity across cooling / heating coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows:
-
-
-
... More
Chemical, Biological and Radiological (CBR) filtration with dia-electric media with efficency not less than 90 % of PM .1 micron alongwith 95 % of gases contamination removal with 350 mm depth (CBR- Certification IACS for filteration efficiency, Green Pro, ISO, FDA & RoHS - refer details specifcation for CBR Filter for compliance) in the AHU along with necessary frames, Air Decontamination Chamber in the supply air/ plenum comprising of nanoX coating plasmOX having EPA approved metallic compound of five metals targeted on Alumninum matrix cell duly enclosed by a poly quartz casing tube with the capability to produce ionized Hydroxyl oxidizers having required wattage for different CFM's. The Equipment shall a microbiological testing report against Bacteriophage (MS-2 FDA) surrogate SARS Cov-2 with a minimum efficiency of 99 percent along with a Virology report from ICMR approved lab with an minimum efficiency of 99 percent against SARS COV2 within 45 minutes
-
-
-
... More
3,000 CFM, 50 mm St. Pr., 6 Row CC, 2 Row HC
1
-
-
... More
DOUBLE SKIN CEILING SUSPENDED AHU
-
-
-
... More
Supply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit ceiling suspended type fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside with blower, blower section and blower motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 4 Row cooling coil made of Aluminium finned Copper tube with coil section, pre-filter section with non woven synthetic media of 10 micron particle size with an efficiency of 90%, polished stainless steel drain pan made out of 22 G sheet duly insulated complete with motor, direct / belt drive as mentioned below etc. without face and bypass dampers. All direct driven fan motor shall be sourced from fan manufacturer & factory fitted only. The AHU panels shall be insulated with 23mm thick & 36 Kg/m³ density PU foam. The motor & blower assembly shall be mounted on Aluminium extruded section only with starter panel. The complete AHU shall conform to standard specification. The face velocity across cooling coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows:
-
-
-
... More
Chemical, Biological and Radiological (CBR) filtration with dia-electric media with efficency not less than 90 % of PM .1 micron alongwith 95 % of gases contamination removal with 350 mm depth (CBR- Certification IACS for filteration efficiency, Green Pro, ISO, FDA & RoHS - refer details specifcation for CBR Filter for compliance) in the AHU along with necessary frames, Air Decontamination Chamber in the supply air/ plenum comprising of nanoX coating plasmOX having EPA approved metallic compound of five metals targeted on Alumninum matrix cell duly enclosed by a poly quartz casing tube with the capability to produce ionized Hydroxyl oxidizers having required wattage for different CFM's. The Equipment shall a microbiological testing report against Bacteriophage (MS-2 FDA) surrogate SARS Cov-2 with a minimum efficiency of 99 percent along with a Virology report from ICMR approved lab with an minimum efficiency of 99 percent against SARS COV2 within 45 minutes
-
-
-
... More
2,000 CFM, 32 mm St. Pr., 4 Row CC
6
-
-
... More
2,000 CFM, 35 mm St. Pr., 6 Row CC
2
-
-
... More
2,500 CFM, 32 mm St. Pr., 4 Row CC
4
-
-
... More
2,500 CFM, 32 mm St. Pr., 6 Row CC
1
-
-
... More
3,000 CFM, 35 mm St. Pr., 4 Row CC
5
-
-
... More
3,500 CFM, 35 mm St. Pr., 4 Row CC
1
-
-
... More
4,000 CFM, 35 mm St. Pr., 4 Row CC
6
-
-
... More
FAN COIL UNIT (FCU)
-
-
-
... More
Supply, installation, testing and commissioning of GI powder coated fan coil units complete with fan, 3 speed motor, 4 row deep cooling coil, aluminium filters with filter box, double sandwiched insulated tray, ball valve with strainer, copper connection, rotary switch, supporting arrangement, electrical wiring etc. The fan shall be selected for 16 mm static pressure. The complete fan coil unit shall have acoustically lined casing & shall be in line with the standard specification. The capacity of fan coil units shall be as follows:
-
-
-
... More
1.0 TR (400 CFM)
35
-
-
... More
1.5 TR (600 CFM)
42
-
-
... More
2.0 TR (800 CFM)
25
-
-
... More
2.5 TR (1000 CFM)
18
-
-
... More
3.0 TR (1200 CFM)
32
-
-
... More
4.0 TR (1600 CFM)
12
-
-
... More
THERMOSTAT FOR AHU & FCU
-
-
-
... More
Supply, installation, testing and commissioning of digital display type thermostat for air handling unit for cool / heat application suitable for four pipe system & humidistat suitable for working with humidifier and hot water coil control valves for various air handling Units.Controller have provision to display differential pressure accress OT if required. The thermostat shall have provision of setting of space temperature and display of the same.
-
-
-
... More
The humidistat shall have provision of setting space RH and display of the same. The quoted price of thermostat / humidistat shall include the cost of 20mm MS conduits, control cabling, MS Box etc as required. The cost quoted shall be excluding the control valves and humidifier
-
-
-
... More
Cooling / heating thermostat for balance AHU
40
-
-
... More
THERMOSTAT FOR FCU
-
-
-
... More
Supply, installation, testing and commissioning of automatic control for Fan Coil Units consisting of pressure independent balancing cum two way control valve (already quantified above) & digital thermostat, which will have provision of setting of room temperature, setting of fan speed (High, Medium, Low) and shall display the inside RH.
164
-
-
... More
AIR OZONE SYSTEMS
-
-
-
... More
Supply, installation, testing, commissioning and handing over the air ozone systems for maintaining indoor air quality. The components of the system must be in strict conformity with the technical specifications. The price to include all connected wiring between the duct mounted ozone generator, VOC sensor / controller. The single phase power supply to the ozone generator / monitor shall be provided near the controllers. Common area ceiling hung AHU shall not have this facility.
-
-
-
... More
The price quoted for supply, installation, testing & commissioning shall be inclusive of all duties & taxes, insurance, transportation / shipment cost from works to site, loading / unloading, port clearance charges etc. as required in Indian Rupees.
-
-
-
... More
Ozone Generator With Sensor & VOC Controller (at Each Floor)
2
-
-
... More
ULTRA VOILET GERMICIDAL IRRADIATION SYSTEM (UVGI )
-
-
-
... More
Supply, Installation , testing , commissioning and handing over of the Ultra Violet Germicidal Irradiations (UVGI) System for maintaining indoor Air Quality. The components of the system must be in strict conformity with the specifications. And shall be including freight from works to site ,Insurance,Lifting,Shifting etc.as required . Single phase power supply for the UVGI will be provided by others. The prices to include all inter connected wiring between the UVGI Lamps. For Detail please refer the Basis of Design For Selection. (At Each Floor)
2
-
-
... More
DBD Bi Polar Ionization
-
-
-
... More
Supply, installation, testing & commissioning of Dielectric Barrier Discharge (DBD) Bi-Polar Ionization System to remove the odour, VOCs, Molds, Viruses, Bacteria's, Pathogens, PMs .
Bipolar ionization system must have compliances to below reference codes and standards :
1.UL 2998 Ozone Free Compliance 2. UL 867-2013 Ozone Standard for Electrostatic Air Cleaners including ozone chamber test 3. IP66 Enclosures
4. UL 1995 Heating and Cooling Equipment.
5. UL 2043 Standard for Fire Test for Heat and Visible Smoke Release for Discrete Products and Their Accessories Installed in Air-Handling Spaces.
6. OPA 2807-10, OPA 2808-10
7. ASHRAE 62.1
-
-
-
... More
The bipolar ionization air purifiers shall have been independently tested by a third-party to ANSI/AHAM AC-1-2002 and provide a minimum Clean Air Delivery Rate (CADR) performance of 125 Dust CADR and 190 Mold CADR. Any bipolar ionization system not tested or rated above a 100 CADR is not allowed. Bipolar ionization manufacturer must have third party laboratory testing results proving contaminant and pathogens reductions against COVID thru ASTM Test Method( 99.9% efficiency), VOCs and TVOC (90% efficiency), MS2 (95% efficiency), Staph (95% efficiency), E. Coli (95% efficiency), Dust-Particulate Matter 0.3 (86% efficiency), Mold (90% efficiency), and C. Dificile (95% efficiency). Manufacturer shall furnish these reports on request. Ionization tubes must be constructed from durable, shatterproof composite material, not glass. Composite tubes must be able to last for 17,600 hours or more. Glass tubes are not be permitted due to potential of shatter caused by vibration. Tube must retain 90% of ion output efficiency at 17,600 hour mark.
The units to be as per as per Specification for all re-circulating systems of following capacity of units as mentioned below. (Ground To Ninth Floor)
2
-
-
... More
VARIABLE AIR VOLUME (VAV) BOX
-
-
-
... More
Supply, installation, testing, and commissioning of pressure independent VAV boxes for cooling / heating application including 220 / 24 V transformers, wiring between transformers, temperature sensors for VAV box suitable for following air Quantity (CFM)
-
-
-
... More
1000 to 1200 CFM
2
-
-
... More
1201 to 1500 CFM
2
-
-
... More
1501 to 1800 CFM
3
-
-
... More
2201 to 2700 CFM
1
-
-
... More
AIR COOLED SPLIT TYPE SPLIT UNITS AIR-CONDITIONER
-
-
-
... More
Supplying, installing, testing and commissioning of Air Cooled Invertor Split type wall mounted /Ceiling suspended 5 Star Air conditioners suitable for R410A or eco-friendly refrigerant with evaporating unit comprising of cooling coil, blower with motor in Metallic (Steel) casing and condensing unit comprising hermetically sealed scroll compressor, condenser coil, and propeller fan. Unit shall be complete with controls, interconnecting copper refrigerant piping with insulation, drain pipes and electrical cabling etc. between evaporative and condensing unit, refrigerant gas and oil and complete as per specifications. The unit shall be suitable for operating on 240 volt, 1 phase, 50 Hz AC supply with five star energy rating. The units shall be suitable for chorded remote operation. The refrigerant piping & cabling shall run in PVC sleeve Steel supporting structure for outdoor units suitable for wall mounting / floor mounting. Nothing extra shall be paid on any account i.e. refrigerant pipes, drain pipes etc.
-
-
-
... More
Providing, fixing and testing of copper refrigerant piping of appropriate sizes duly insulated with nitrile rubber insulation of 19 mm thickness and cabling for all types of split AC units. The pipes plus nitrile rubber insulation and cable are to be covered with PVC flexible conduits for protection.
-
-
-
... More
Note: Providing and fixing of Powder coated M.S. angle iron frame work for outdoor unit is also included in the above scope. Contractor to submit design/Scheme for Iron frame and obtain approval of engineer/employer before proceeding purchase & installation.
-
-
-
... More
Suitable Type Refrigerant & Drain Piping With Insulation, Control Cable, automatic voltage Stablizer and outdoor stand extra Cost shall be as per JSR-2022-E&M
-
-
-
... More
Capacity : 1.5 TR 5 Star Split AC Inverter Type IS 1391 Part-II
18
-
-
... More
Capacity : 1.5 TR 5 Star Split AC Inverter Type IS 1391 Part-II
12
-
-
... More
Refrigerant Piping
-
-
-
... More
Copper Tube of Size-6.4mm for Split Unit AC 1/1.5/2/3 TR Capacity
180
-
-
... More
Copper Tube of Size-9.5mm for Split Unit AC 1/1.5/2/3 TR Capacity
120
-
-
... More
Copper Tube of Size-12.7mm for Split Unit AC 1/1.5/2/3 TR Capacity
180
-
-
... More
Copper Tube of Size-15.9mm for Split Unit AC 1/1.5/2/3 TR Capacity
120
-
-
... More
Automatic Voltage Stablizer
-
-
-
... More
4KVA Wall Mounted Automatic Voltage Stablizer from Range 140V to 280V
30
-
-
... More
Drain Pipe
-
-
-
... More
Drain Pipe for AC
360
-
-
... More
Outdoor Stand
-
-
-
... More
Outdoor Stand for 1/1.5 TR Split Units
18
-
-
... More
Outdoor Stand for 2.0 TR Split Units
12
-
-
... More
SCHEDULED TIMER FOR SPLIT AC
-
-
-
... More
Supply, installation, testing and commissioning of Scheduled Timer for wall mounted split type Air conditioning units.
2
-
-
... More
VENTILATIONS EQUIPMENTS
-
-
-
... More
AXIAL FLOW FANS (SMOKE EXTRACTION/EXHAUST FAN)
-
-
-
... More
Supply, installation testing & commissioning of Fire Rated direct driven Axial flow fan. Each fan shall be complete with casing made from mild steel duly enamel painted, adjustable pitch die cast aluminum impeller (HUB & BLADES), mounting clits, structural frame with blank-off sheet, anchor fastener with vibration isolation Springs, back draft damper(wherever required), bird screen at one sides (entry for supply air and exit for exhaust air) and rated Motor with class-H insulation. Motor shall be suitable for 415+10% volts, 50 cycles , 3 phase AC supply. with starter panel.
-
-
-
... More
Fan and motor shall be fire rated to 250 Deg C for 2 hours or as indicated in the specifications
-
-
-
... More
Back draft Damper : Where required for system design roof-mounted fan shall be equipped with a rattle-free back draft damper to prevent air from re entering the fan when fan is not in operation, thus sealing completely in closed position. Damper shall be chatter proof under all conditions.
-
-
-
... More
Note: Contractor Has to take approval on computer generated selection charts and fan curves showing power input and fan motor etc. prior to order the fans,(a) Noise level @ 3m from Fan shall be less than 78 dBA. with starter panel
-
-
-
... More
Note:-These fans would be connected to the fire alarm system & BMS system of the building and would start automatically in case of Fire
-
-
-
... More
Note
-
-
-
... More
1. Outlet Velocity for normal mode fans not to exceed 10.0 MPS(Meter/Second)
-
-
-
... More
2. Outlet Velocity for Fire mode fans not to exceed 12.0 MPS (Meter/Second)
-
-
-
... More
3. Fan motor shall meet IE3 or above standard as per IS-12615
-
-
-
... More
4. Static pressure and Motor Rating : The Indicated static pressure and motor rating is only provisional. Vendor to calculate static pressure based on drawings and pressure drop of finalized Equipment and submit for approval. The procurement shall be processed only after duly approval of calculation and selection from the Project Manager. Sound attenuator shall be as specified with following characteristics:
-
-
-
... More
5. Thickness of casing : for dia( 315-630 )mm - 2mm , dia ( 710-1120)mm - 3mm , dia (1250-1400)mm - 4mm & dia 1600mm - 5mm.
-
-
-
... More
6. In case of attenuator , calculation of reduction of sound level with insertion loss of attenuator is to be submitted.
-
-
-
... More
Capacity 2000 CFM, SP 15 mm wg
1
-
-
... More
Capacity 3000 CFM, SP 15 mm wg
1
-
-
... More
Capacity 4000 CFM, SP 20 mm wg
1
-
-
... More
Capacity 5000 CFM, SP 20 mm wg
2
-
-
... More
Capacity 6000 CFM, SP 25 mm wg
1
-
-
... More
Capacity 7000 CFM, SP 25 mm wg
1
-
-
... More
Capacity 8000 CFM, SP 25 mm wg
1
-
-
... More
Capacity 9000 CFM, SP 30 mm wg
1
-
-
... More
Capacity 10,000 CFM, SP 30 mm wg
1
-
-
... More
Capacity 11,000 CFM, SP 30 mm wg
1
-
-
... More
Capacity 12,000 CFM, SP 30 mm wg
2
-
-
... More
AXIAL FLOW FANS (SUPPLY/PRESSURISATION FAN)
-
-
-
... More
Supply, installation testing & commissioning of direct driven Axial flow fan. Each fan shall be complete with casing made from mild steel duly enamel painted, adjustable pitch die cast aluminum impeller (HUB & BLADES), mounting clits, structural frame with blank-off sheet, anchor fastener with vibration isolation Springs, back draft damper (wherever required) bird screen at both sides and rated Motor with class-F insulation. Motor shall be suitable for 415+10% volts, 50 cycles , 3 phase AC supply with starter panel.
-
-
-
... More
Back draft Damper : Where required for system design roof-mounted fan shall be equipped with a rattle-free back draft damper to prevent air from re entering the fan when fan is not in operation, thus sealing completely in closed position. Damper shall be chatter proof under all conditions.
-
-
-
... More
Note: Contractor Has to take approval on computer generated selection charts and fan curves showing power input and fan motor etc. prior to order the fans,(a) Noise level @ 3m from Fan shall be less than 78 dBA. with starter panel
-
-
-
... More
Note:-These fans would be connected to the fire alarm system & BMS System of the building and would start automatically in case of Fire
-
-
-
... More
Note
-
-
-
... More
1. Outlet Velocity for normal mode fans not to exceed 10.0 MPS(Meter/Second)
-
-
-
... More
2. Outlet Velocity for Fire mode fans not to exceed 12.0 MPS (Meter/Second)
-
-
-
... More
3. Fan motor shall meet IE3 or above standard as per IS-12615
-
-
-
... More
4. Static pressure and Motor Rating : The Indicated static pressure and motor rating is only provisional. Vendor to calculate static pressure based on drawings and pressure drop of finalized Equipment and submit for approval. The procurement shall be processed only after duly approval of calculation and selection from the Project Manager. Sound attenuator shall be as specified with following characteristics:
-
-
-
... More
5. Thickness of casing : for dia( 315-630 )mm - 2mm , dia ( 710-1120)mm - 3mm , dia (1250-1400)mm - 4mm & dia 1600mm - 5mm.
-
-
-
... More
6. In case of attenuator , calculation of reduction of sound level with insertion loss of attenuator is to be submitted.
-
-
-
... More
Capacity 2000 CFM, SP 15 mm wg
1
-
-
... More
Capacity 3000 CFM, SP 15 mm wg
1
-
-
... More
Capacity 4000 CFM, SP 20 mm wg
1
-
-
... More
Capacity 5000 CFM, SP 20 mm wg
2
-
-
... More
Capacity 6000 CFM, SP 25 mm wg
1
-
-
... More
Capacity 7000 CFM, SP 25 mm wg
1
-
-
... More
Capacity 8000 CFM, SP 25 mm wg
1
-
-
... More
Capacity 9000 CFM, SP 30 mm wg
1
-
-
... More
Capacity 10,000 CFM, SP 30 mm wg
1
-
-
... More
Capacity 11,000 CFM, SP 30 mm wg
1
-
-
... More
Capacity 12,000 CFM, SP 30 mm wg
2
-
-
... More
CABINET TYPE CENTRIFUGAL FAN :
-
-
-
... More
Supply, installation, testing, commissioning of direct driven double skin Cabinet type centrifugal fan with 25mm thick PUF insulation fan section consist of Centrifugal Fan, forward curve, with radial tip double wheel, double inlet, consisting of motor, drive arrangement, aluminum common frame for fan and motor, cushy foot mounting, aluminum base frame for the unit, VCD on the outlet of fan, filter and accessories as per specification and drawing complete with 25mm thick five layer GI wire mesh filter, Structural frame with blank-off sheet, anchor fastener with vibration isolation Springs and starter panel.
-
-
-
... More
Motor: Fan motor shall be energy efficient and suitable for 415±10% volts, 50 cycles, 3 phase AC power supply, squirrel-cage, totally enclosed, fan-cooled motor, provided with class F insulation, and of approved make. Motor name plate horsepower shall exceed brake horsepower by a minimum of 10%. Motor shall be designed especially for quiet operation and motor speed shall not exceed 1440 rpm. The fan and motor combination selected for the required performance shall be of the most efficient (smallest horsepower), so that sound level is lowest. Motor shall have a minimum efficiency of IE3 or as per relevant BIS/NEMA codes.
-
-
-
... More
The motor shall be spark-proof. The starter panel shall be provided with in-built timer to switch OFF the fan after a preset time (say 300 seconds) once triggered
-
-
-
... More
The cost include with approximate 10 RM suitable cabling between starter & unit.
-
-
-
... More
Note:-These fans would be connected to the fire alarm system/BMS System of the building and would start automatically in case of Fire
-
-
-
... More
Note
-
-
-
... More
1. Outlet Velocity for normal mode fans not to exceed 10.0 MPS(Meter/Second)
-
-
-
... More
2. Outlet Velocity for Fire mode fans not to exceed 12.0 MPS (Meter/Second)
-
-
-
... More
3. Static pressure and Motor Rating : The Indicated static pressure and motor rating is only provisional. Vendor to calculate static pressure based on drawings and pressure drop of finalized Equipment and submit for approval. The procurement shall be processed only after duly approval of calculation and selection from the Project Manager. Sound attenuator shall be as specified with following characteristics:
-
-
-
... More
1000 CFM with 15 mm static Pressure (Flame Proof)
1
-
-
... More
INLINE FAN (Ceiling suspended)
-
-
-
... More
Supply, installation, testing, commissioning of Inline fan with vibration isolators & speed regulator, complete as per specification and drawing. The Motor shall be suitable to run on 1 phase/50 hz/ 220 v electrical power.
-
-
-
... More
200 CFM with 10 mm static Pressure
2
-
-
... More
400 CFM with 10 mm static Pressure
1
-
-
... More
500 CFM with 12 mm static Pressure
2
-
-
... More
PROPELLER FAN (Mettalic Type):
-
-
-
... More
Supply, installation, testing and commissioning of wall mounted Propeller type heavy duty exhaust Fan of metallic construction complete with speed regulator, bird screen, gravity louvers, vibration isolators, required cable, plug & other accessories compete as required, suitable for single phase, 240± 10 volts, 50Hz AC. supply of following capacities:
-
-
-
... More
300 mm sweep dia (900 RPM)
5
-
-
... More
380 mm sweep dia (900 RPM)
2
-
-
... More
450 mm sweep dia (900 RPM)
2
-
-
... More
ABS PLASTIC TYPE PROPELLER FAN
-
-
-
... More
Supply, installation, testing & commissioning of Wall mounted Propeller type exhaust air fans of high grade ABS plastic construction complete with electric motor suitable for operation on 230 V+ 10%,50 Hz, 1 phase AC supply fitted with speed regulator, mountings frames, louvers and bird screen, required cable & plug to connect with socket etc. complete as required of following capacities.
-
-
-
... More
200 mm sweep dia (900 RPM)
2
-
-
... More
250 mm sweep dia (900 RPM)
2
-
-
... More
300 mm sweep dia (900 RPM)
1
-
-
... More
HYDROGEN (H2) SENSOR
-
-
-
... More
H2 Sensor for Battery room with IP-65 protection, long life, fast response with high accuracy and integrated with BMS Panel. Hydrogen level in Battery room as per Fire Code and CE/UL approved. These H2 sensors and controller are interface with fire alarm panel/BMS (as available) & Specification.
-
-
-
... More
Response Time10 sec
-
-
-
... More
Output-4-20mA or 2-10V, Supply-24V DC
-
-
-
... More
Controller
1
-
-
... More
H2Sensors
1
-
-
... More
CHILLED /CONDENSOR/HOT WATER PIPING & VALVES
-
-
-
... More
Supply, installation, testing and commissioning of bare chilled / Hot water piping of M.S 'Heavy' , complete with fittings like elbows, tees, reducers, bends, MS flanges, supports, welding, painting etc. but excluding valves as required conforming to IS:1239 / 3589 & technical specification. All Chilled Water and hot water pipes are insulated with Class-O closed cell elastometric nitrile rubber tubular Insulation having duly laminated aluminum foil of mat finish as given below or in technical specification.
-
-
-
... More
Chilled Water Pipe (With Nitrile Rubber tubular Insulation)
-
-
-
... More
Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 Kg / cu m density, thermal conductivity 0.037 W/MK or better at 20 deg mean temperature class ‘O’ insulation applied by suitable rubber based adhesive complete including repairing of damage to building etc. as per specifications and as required complete in all respect. Insulation duly laminated with aluminum foil of mat finish as given below or in technical specification
-
-
-
... More
Note:-The Pipes of sizes 150mm & below shall be M.S. ‘C’ class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes up to 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.
-
-
-
... More
200 mm dia (32 mm Thick NR)
50
-
-
... More
150 mm dia (32 mm Thick NR)
225
-
-
... More
125 mm dia (32 mm Thick NR)
230
-
-
... More
100 mm dia (32 mm Thick NR)
450
-
-
... More
80 mm dia (32 mm Thick NR)
305
-
-
... More
65 mm dia (32 mm Thick NR)
105
-
-
... More
50 mm dia (32 mm Thick NR)
350
-
-
... More
40 mm dia (32 mm Thick NR)
205
-
-
... More
32 mm dia (19 mm Thick NR)
315
-
-
... More
25 mm dia (19 mm Thick NR)
350
-
-
... More
Pressure Independent Balancing Cum Two Way Control Valve
-
-
-
... More
Supply, Installation, Testing and Commissioning of Pressure Independent Balancing Cum Two way Control valve having differential pressure controller & self- balancing for chilled water with electrical actuator. Pressure independent type dynamic balancing valve integrated with 2 way modualating control valves in a single body. Body material shall be brass or cast steel. All working parts like stem & spring shall be in SS. Balancing should be done only in Valve not in actuator so that at any given condition of failure, balancing is not lost and easily accessible. The actuator versions should be directly mounting on valves without any adjustments. All the electrical actuator shall be operated through 24 V AC and should be modulated through control signals 0…10 V DC, 4….20 mA, through BMS or display thermostats. The actuators should have stroke position indication and manual override mean to manual open and close the actuators when commissioning. Maximum close off pressure shall not be less than 6 Bar for up to 50 mm valves and not be less than 7 Bar for 65 mm & above. Valves should have pressure rating of 25 Bar minimum.
-
-
-
... More
Electronic modulating actuator working on 2-10 V DC, 4- 20 mA electric signal. The minimum close off Pressure of actuator must be 1.5 times shut off head of pump as per specifications of following sizes:
-
-
-
... More
80 mm Dia, Maximum 132 GPM
1
-
-
... More
65 mm Dia, Maximum 72 GPM
2
-
-
... More
50 mm Dia, Maximum 50 GPM
11
-
-
... More
40 mm Dia, Maximum 26 GPM
9
-
-
... More
32 mm Dia, Maximum 17 GPM
7
-
-
... More
25 mm Dia, Maximum 8 GPM
13
-
-
... More
BUTTERFLY VALVE (MANUAL)
-
-
-
... More
Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.
-
-
-
... More
BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot eater circulation as specified
-
-
-
... More
80 mm dia (32 mm Thick NR)
2
-
-
... More
65 mm dia (32 mm Thick NR)
4
-
-
... More
50 mm dia (32 mm Thick NR)
32
-
-
... More
40 mm dia (32 mm Thick NR)
18
-
-
... More
Brass Ball Valves With Y-Strainer
-
-
-
... More
PN 16 pressure rating for chilled water/hot water circulation as specified
-
-
-
... More
25 mm dia
85
-
-
... More
32 mm dia
82
-
-
... More
Auto Air Vent Valve
-
-
-
... More
15 mm dia
24
-
-
... More
19 mm dia
12
-
-
... More
25 mm dia
3
-
-
... More
PRESSURE GAUGE (ALL SS TYPE)
-
-
-
... More
Providing and fixing in position the industrial type pressure gauges with gun metal
/ brass valves complete as required.Pressure gauges of Bourdon type with range selected so that normal operation is near to middle of the scale. Syphons and cocks to be provided along with SS snubber.
50
-
-
... More
THERMOMETERS
-
-
-
... More
Providing & fixing in position the mercury in glass industrial type thermometers Thermometers of approved make & shall be of mercury in steel type with range suitable for the temperature services. It should be installed in the thermowells as explained in the tender specifications.
50
-
-
... More
FLOW SWITCH
-
-
-
... More
Supplying, fixing, testing and commissioning of SG Iron Body flow switch with necessary control wiring and interlocking at Chilled Water Pump
1
-
-
... More
DRAIN VALVES
-
-
-
... More
Supply, Installation, Testing & Commissioning for Drain Valves in dirt legs complete with nipples as per specifications.
-
-
-
... More
50 mm Dia
20
-
-
... More
40 mm Dia
8
-
-
... More
32 mm Dia
8
-
-
... More
25 mm Dia
3
-
-
... More
DUCTING,INSULATION,DAMPER, GRILLE & DIFFUSER
-
-
-
... More
FACTORY FABRICATED GALVANIZED STEE(GSS) SHEET METAL DUCTS
-
-
-
... More
Supply. Installation, testing and commissioning of factory fabricated Galvanized Steel (GSS) Sheet metal ducts with flanges, inbuilt sealant, gasket, supports, vanes, dampers, links, levers and quadrants etc. as per specifications and drawings. Duct shall be furnish at site in "L" shape or box shape from factory. The rates shall include all materials of the duct and labour for suspension and supporting arrangement for plenums, ducts, complete with fire retardant flexible connection as required and as per specifications.
-
-
-
... More
Factory fabricated GSS sheet metal rectangular ducting as per IS 655-2006
-
-
-
... More
0.63 MM (24 Gauge )
2780
-
-
... More
0.80 MM (22 Gauge )
1992
-
-
... More
1.00 MM (20 Gauge )
532
-
-
... More
1.25 MM (18 Gauge) Plenum
53
-
-
... More
SITE FABRICATED GALVANIZED STEE(GSS) SHEET METAL DUCTS
-
-
-
... More
Supply, Fabrication, installation and testing of Galvanized Steel (GS) sheet metal ducts & finally applying fire rated paint as per BS 476 Part 24 (Site FABRICATED DUCTS For Connection /Plenum etc.) in accordance with the approved shop drawings complete with all accessories like vanes, flanges, suspension rods , anchor bolts, GI bolts & nuts, etc., as per specifications.
-
-
-
... More
Site fabricated GSS sheet metal rectangular ducting as per IS 655-2006
-
-
-
... More
0.63 MM (24 Gauge )
559
-
-
... More
0.80 MM (22 Gauge )
270
-
-
... More
1.00 MM (20 Gauge )
107
-
-
... More
1.25 MM (18 Gauge)
9
-
-
... More
FIRE RATED FACTORY FABRICATED GALVANIZED STEE(GSS) SHEET METAL DUCTS
-
-
-
... More
Supply. Installation, testing and commissioning of Fire rated sheet metal ducts shall be fabricated from Lock Forming Quality grade prime galvanized steel sheet with flanges complete with supports, vanes, dampers, links, levers and quadrants etc. as per specifications and drawings. Supporting distance shall not exceed 1.2 Mtr with 6mm thick fire retardant gasket suitable for 250 deg C 2 hr shall be used in duct joints along with fire sealants. Suitable access doors shall be provided at every 3m. The rates shall include all materials of the duct and labor for suspension and supporting arrangement for plenums, ducts, complete with fire retardant flexible connection as required and as per specifications.
-
-
-
... More
All fire rated duct, smoke exhaust ducts shall be quoted with flame bar BWII or equivalent to achieve the required fire rating, also all the related accessories gaskets shall be suitable for the required fire rating.
-
-
-
... More
Factory fabricated GSS sheet metal rectangular ducting as per IS 655-2006
-
-
-
... More
1.25 MM (18 Gauge) Plenum & Exhaust Duct
803
-
-
... More
Duct Insulation
-
-
-
... More
Supply. Installation, testing and commissioning of insulation on the surface of the duct with duly laminated aluminum foil (26G) of mat finish closed cell nitrile rubber (Class 'O' ) with suitable adhesive, as per specifications and drawings. The Joints shall be sealed with 50mm wide and 3 mm thick self adhesive nitrile rubber tape Insulation. The rates shall include all materials of the insulation and labour works with adhesive, complete as required and specifications.
-
-
-
... More
19 mm
4158
-
-
... More
25 mm
889
-
-
... More
AHU ROOM ACCOUSTIC LINING
-
-
-
... More
Supplying, fixing acoustic lining on wall and ceiling of AHU rooms with 50mm thick, density 32 kg/cu.m resin bonded glass fiber insulation friction fixed in 610mm x 610 mm frame work made of 25X50X50X50X25 mm made out of 0.6mm thick GI sheet U shaped channel and covered with reinforced fiber glass tissue and finished with 0.80 mm perforated aluminium sheet etc. complete as required and as per specifications. 50 mm thick
803
-
-
... More
Duct Acoustic Lining
-
-
-
... More
Supply and fixing of acoustic lining of supply air duct and plenum with thick Engineered Nitrile Rubber open cell foam having a Noise Reduction Coefficient of 0.55 with Density 140 - 180 Kg/m3 passing Class 1 Fire Performance test as per BS 476 Part 7, Air Erosion test for 10,000 fpm air velocity as per ASTM C 1071-05 and with built-in antimicrobial protection. The material should pass Fungi Resistance Test as per DIN EN ISO 846 Method A and Bacterial Resistance Test as per DIN EN ISO 846 Method C; to be applied using manufacturer's recommended Rubber based Adhesive in a blend of solvents.
-
-
-
... More
20 mm
756
-
-
... More
25 mm
133
-
-
... More
VOLUME CONTROL DAMPER
-
-
-
... More
Supply. Installation, testing and commissioning of G.I construction Duct/ Volume control Dampers for Controlling the Airflow in Ducts with neoprene rubber gaskets,nuts, Bolts, Centrifugals Linkages, Flanges etc. as per specification.
23
-
-
... More
MOTRIZED VOLUME CONTROL DAMPER
-
-
-
... More
Supply, installation, testing and commissioning of Motorized (ON-OFF Type) duct mounted GI volume control damper with enthalpy sensor and necessary control wire (minimum 1.5 sqmm) for integration within AHU room.
-
-
-
... More
Motorized (ON-OFF Type) duct mounted GI volume control damper
3
-
-
... More
Motorized (ON-OFF Type) duct mounted GI volume control Actuator
11
-
-
... More
BACK DRAFT DAMPERS
-
-
-
... More
Supply, Installation, testing and commissioning of 18 Gauge G.I construction Back draft Dampers for Controlling the recirculation of air with neoprene rubber gaskets,nuts, Bolts, Centrifugals Linkages, Flanges etc. as per specification. Louvres shall be made powder coated extruded aluminum.
1
-
-
... More
PRESSURE RELIEF DAMPERS
-
-
-
... More
Supply,. Installation, testing and commissioning of 18 Gauge aluminum alloy extrusions with welded/cleated frames Pressure Relief Dampers for Controlling the Excess pressure up to 60pa with neoprene rubber gaskets,nuts, Bolts, Centrifugals Linkages, Flanges etc. as per specification. Louvres shall be made powder coated extruded aluminum with suitable thickness.
1
-
-
... More
GRILLES AND DIFFUSERS
-
-
-
... More
Supply. Installation, testing and commissioning of powder coated extruded aluminum sections grills as per specification.
28
-
-
... More
Grilles with Dampers
-
-
-
... More
Supply. Installation, testing and commissioning of powder coated extruded aluminum section grills with dampers for supply air terminal for air-conditioning as per specification.
49
-
-
... More
Diffusers
-
-
-
... More
Supply. Installation, testing and commissioning of powder coated extruded aluminum square diffusers with antismudge ring and removable core.
-
-
-
... More
Supply air with dampers
146
-
-
... More
Return air without damper
110
-
-
... More
Flexible Duct
-
-
-
... More
Supply. Installation, testing and commissioning of thermal flexible aluminum duct of following sizes duly supported at regular interval as per site requirement & spefications. 200 mm
165
-
-
... More
Slot Diffusers
-
-
-
... More
Supply. Installation, testing and commissioning of slot diffusers with/without damper as specified below and as per specification. 3-Slot Diffuser
1
-
-
... More
Linear Grille
-
-
-
... More
Supply. Installation, testing and commissioning of powder coated extruded aluminum Linear Grille.
-
-
-
... More
100 mm
1
-
-
... More
150 mm
314
-
-
... More
200 mm
31
-
-
... More
Exhaust/Fresh Air Louvers
-
-
-
... More
Supply. Installation, testing and commissioning of exhaust air/fresh air louvers of powder coated extruded aluminum construction with bird screen, minimum 80 mm deep.
10
-
-
... More
Fire Dampers & Actuator
-
-
-
... More
Supplying, Fixing, testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring, the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications.
-
-
-
... More
Duct/Wall mounted multi blade, motorised fire & smoke dampers with spring return actuator. The damper shall be of at least 1.5 hr. fire rating and actuated with the help of 24 V electric actuator excluding. The damper shall be as per UL listed UL 555; 1995 and CBRI approved. The damper shall be constructed out of 16G galvanised steel sheet & as per specification with Control Cable to Potential Free Contact for tripping of AHU fan motor.
-
-
-
... More
Supply, installation, testing and commissioning of Motorised Spring Return Actuator for devices up to 0.8 sq. meter with control panel & temperature sensor.
-
-
-
... More
Fire Damper
4
-
-
... More
Actuator
13
-
-
... More
Under Deck Insulation of Exposed Roof
-
-
-
... More
Providing and Fixing Underdeck Insulation with 50 mm thick with closed cell Nitrile Rubber with prelaminated Aluminum foil on one side having a low stable k value of 0.035 k.cal/hr.m at 10.C and minimum density of 40-55 ± 3 kg/cum.The R-value should be as per ECBC Code. 50mm
2090
-
-
... More
ELECTRICAL WORKS
-
-
-
... More
Supply, Installation, Testing & Commissioning of following Switchgears as an Isolator in IP-65 rated in power coated 16 SWG sheet steel enclosure .
-
-
-
... More
40A 4P MCCB(25 KA)
2
-
-
... More
63A 4P MCCB(25 KA)
4
-
-
... More
POWER CABLING
-
-
-
... More
Supply, laying, testing and commissioning of power and control cabling as per specification given in the tender.
-
-
-
... More
A) Power cabling (XLPE insulated Aluminum / Copper conductor as given below armoured / unarmoured cables of 1.1 KV Grade) including cable end termination with brass compression glands & lugs etc. as per specification.
-
-
-
... More
Note:- Power cable with earthing shall be made available near indoor / outdoor units. Only termination into HVAC equipment's (Indoor & Outdoor) shall be done by HVAC Contractor.
-
-
-
... More
3.5 Cx 25 Sqmm Al Conductor
18
-
-
... More
3.5 Cx 35 Sqmm Al Conductor
45
-
-
... More
3.5 Cx 50 Sqmm Al Conductor
20
-
-
... More
3.5 Cx 70 Sqmm Al Conductor
52
-
-
... More
3.5 C x 95 Sq. mm Al Conductor
18
-
-
... More
3.5 C x 120 Sq. mm Al Conductor
14
-
-
... More
3.5 C x 150 Sq. mm Al Conductor
28
-
-
... More
3.5 C x 185 Sq. mm Al Conductor
22
-
-
... More
3.5 C x 240 Sq. mm Al Conductor
24
-
-
... More
3.5 C x 300 Sq. mm Al Conductor
56
-
-
... More
Supply and laying ,testing and commissioning of following sizes of Copper conductor control cables with PVC conduit & fixing clamps and effecting proper connections to equipment etc. of following sizes :
-
-
-
... More
4C x 16 Sq. mm Copper Conductor (Armoured)
72
-
-
... More
4C x 10 Sq. mm Copper Conductor (Armoured)
100
-
-
... More
4C x 6 Sq. mm Copper Conductor (Armoured)
140
-
-
... More
4C x 4 Sq. mm Copper Conductor (Armoured)
114
-
-
... More
3C x 1.5 sq. mm Copper Conductor (unarmoured)
200
-
-
... More
3C x 2.5 sq. mm Copper Conductor (unarmoured)
142
-
-
... More
3C x 4 sq. mm Copper Conductor (unarmoured)
82
-
-
... More
3C x 10 sq. mm Copper Conductor (Armoured)
72
-
-
... More
3C x 16 sq. mm Copper Conductor (Armoured)
40
-
-
... More
GI CABLE TRAY
-
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
150 mm wide x 50 mm depth x 1.6 mm thickness.
29
-
-
... More
300 mm wide x 50 mm depth x 1.6 mm thickness.
40
-
-
... More
450 mm wide x 50 mm depth x 2.0 mm thickness.
72
-
-
... More
600 mm width X 50 mm depth X 2.0 mm thickness
24
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
150 mm wide x 50 mm depth x 1.6 mm thickness.
4
-
-
... More
300 mm wide x 50 mm depth x 1.6 mm thickness.
3
-
-
... More
450 mm wide x 50 mm depth x 2.0 mm thickness.
2
-
-
... More
600 mm width X 50 mm depth X 2.0 mm thickness
1
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
150 mm wide x 50 mm depth x 1.6 mm thickness.
2
-
-
... More
300 mm wide x 50 mm depth x 1.6 mm thickness.
2
-
-
... More
450 mm wide x 50 mm depth x 2.0 mm thickness.
2
-
-
... More
600 mm width X 50 mm depth X 2.0 mm thickness
3
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Cross member"(galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
150 mm width X 50 mm depth X 1.6 mm thickness
2
-
-
... More
300 mm width X 50 mm depth X 1.6 mm thickness
2
-
-
... More
450 mm width X 50 mm depth X 2.0 mm thickness
2
-
-
... More
600 mm width X 50 mm depth X 2.0 mm thickness
3
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “Reducer” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
150 mm wide x 50 mm depth x 1.6 mm thickness.
2
-
-
... More
300 mm wide x 50 mm depth x 1.6 mm thickness.
2
-
-
... More
450 mm wide x 50 mm depth x 2.0 mm thickness.
2
-
-
... More
600 mm width X 50 mm depth X 2.0 mm thickness
3
-
-
... More
EARTHING STRIP/WIRES
-
-
-
... More
Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
72
-
-
... More
Supply & laying 25x5mm GI strip at 0.5mt below ground as strip earth electrode including connection/terminating with GI nut,bolt,spring,washer etc. as required.)jointing shall be done by overlapping &with 2sets of brass nuts bolt spring washer spaced at 50mm) 25mm x5mm
344
-
-
... More
INTERNAL EIECTRICAL WORK
-
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C
3058
-
-
... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.
92
-
-
... More
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
16563
-
-
... More
Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
6820
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
-
-
-
... More
CIRCUIT / SUBMAIN WIRING
-
-
-
... More
2x1.5 sq mm + 1x1.5 sq mm earth wire
15728
-
-
... More
2x2.5 sq mm + 1x2.5 sq mm earth wire
7989
-
-
... More
2x6 sq mm + 1x6 sq mm earth wire.
165
-
-
... More
2x10 sq mm + 1x6 sq mm earth wire.
146
-
-
... More
2x16 sq mm + 1x6 sq mm earth wire.
97
-
-
... More
4x2.5 sq mm + 2x2.5 sq mm earth wire
1899
-
-
... More
4x6 sq mm + 2x6 sq mm earth wire.
234
-
-
... More
4x10 sq mm + 2x6 sq mm earth wire.
282
-
-
... More
4x16 sq mm + 2x6 sq mm earth wire.
263
-
-
... More
Wiring for light point/ fan point / exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular switch, modular plate, suitable GI box etc as required. Group C
311
-
-
... More
Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, 2 way modular switch, modular plate, suitable GI box etc as required.
2
-
-
... More
Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.
584
-
-
... More
Wiring for light/ power plug with 4X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit alongwith 2 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.
165
-
-
... More
Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required
-
-
-
... More
CIRCUIT / SUBMAIN WIRING
-
-
-
... More
2x1.5 sq mm + 1x1.5 sq mm earth wire
624
-
-
... More
2x2.5 sq mm + 1x2.5 sq mm earth wire
350
-
-
... More
2x6 sq mm + 1x6 sq mm earth wire.
58
-
-
... More
2x10 sq mm + 1x6 sq mm earth wire.
39
-
-
... More
2x16 sq mm + 1x6 sq mm earth wire.
48
-
-
... More
4x2.5 sq mm + 2x2.5 sq mm earth wire
233
-
-
... More
4x6 sq mm + 2x6 sq mm earth wire.
165
-
-
... More
4x10 sq mm + 2x6 sq mm earth wire.
117
-
-
... More
4x16 sq mm + 2x6 sq mm earth wire.
107
-
-
... More
Supplying and drawing Following pair 0.5 mm dia FR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair
19
-
-
... More
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
409
-
-
... More
Supplying and fixing of following sizes of PVC conduit along with the accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
20mm dia
263
-
-
... More
25mm dia
18543
-
-
... More
32mm dia
97
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
... More
5/6 amps one way switch
630
-
-
... More
15/16 amp one way switch
1341
-
-
... More
5/6 amp 3 pin socket outlet
630
-
-
... More
5/16 amp 6 pin socket outlet
1341
-
-
... More
Telephone Socket Outlet
2
-
-
... More
TV anteena Socket Outlet
11
-
-
... More
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
283
-
-
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
185
-
-
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.
-
-
-
... More
1 or 2 Module (78mm x 78mm x 45mm) - For Telephone & TV outlet.
14
-
-
... More
4/5 Module (78mm x140mm x 50mm)
1972
-
-
... More
6 Module (78mmX205mmx50mm)
471
-
-
... More
8/9 Module (78mmX230mmx60mm)
126
-
-
... More
12 Module (135mmX205mmx60mm)
87
-
-
... More
Supplying and fixing 2 pin 5 Amp Ceiling rose on the existing junction box/ wooden block including connection etc as required.
283
-
-
... More
Supplying and fixing brass batten/ angle holder including connection etc. as required.
30
-
-
... More
Supplying and fixing Ding dong sound call bell single phase, 230 volts, complete as required.
30
-
-
... More
Installation, testing and commissioning of pre wired fluorescent fitting / Compact fluorescent fitting off all type complete with all accessories and tube etc directly / wall including connection with 1.5 sq.mm FR PVC insulatted. copper conductor single core cable and earthing etc. as required.
2865
-
-
... More
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable, etc. as required.
9
-
-
... More
Installation of exhaust fan up 450 mm sweep in the existing opening including making the hole to suit the size of above the fan, making good the damage, connection, testing, commissioning etc. as required.
17
-
-
... More
Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
5
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). (For UPS Supply)
472
-
-
... More
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
20mm dia
3458
-
-
... More
25mm dia
98
-
-
... More
Supply & drawing following sizes of FR PVC insulated copper conductor single core cables in existing surface/recessed steel / PVC conduit including dismantling as required. 2 x 1.5 sq.mm
98
-
-
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
8 Way Double Door
2
-
-
... More
12 Way Double Door
2
-
-
... More
Supplying and fixing following ways, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
6 Way (4+18), Double Door Horizontal Type
1
-
-
... More
8 Way (4+24), Double Door Horizontal Type
18
-
-
... More
Supplying and fixing following ways surface / recess mounting Vertical type 415 Volts TPN MCB distribution board, of sheet steel dust protected duly power painted inclusive of 200 Amps tinned copper bus bar common, neutral link, earth bar, din bar, for mounting MCB's (But without MCB's and incomer) as required. ( Note:- Vertical Type MCB TP DB is normally used where 3phase outlets are required.
-
-
-
... More
8 Way (4+18), Double Door Vertical Type
11
-
-
... More
12 Way (4+24), Double Door Vertical Type
56
-
-
... More
Supplying and fixing 6 Amp to 32 Amp rating 240 volts, 10 KA "C" Curve Miniature Circuit Breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc.,as required.
-
-
-
... More
6 / 32 Amp Single Pole
2248
-
-
... More
40 Amp DP
2
-
-
... More
50/63 Amp DP
2
-
-
... More
6/32 Amp TPN
30
-
-
... More
40 Amp TPN
18
-
-
... More
50/63 Amp TPN
37
-
-
... More
Supplying and fixing Single pole blanking plate in the existing MCB DB complete etc. as required.
39
-
-
... More
Supplying and fixing of following rating double pole ( Single pole & neutral), 240 volts, resudual current circuit breaker (RCCB), having a sensivity current 30 miliampere in the existing MCB DB complete with connections, testing & commissioning etc as required.
-
-
-
... More
16/25 Amps
89
-
-
... More
40 Amps
58
-
-
... More
63 Amps
114
-
-
... More
Providing and fixing M.V. danger Notice plate of 200mm x 150 mm of made of mild steel, at least 2 mm thick and vitreous enamelded white on both side and with inscription in single red colour in front side as requird
18
-
-
... More
Supplying and fixing Cable End Box (Loose wire box) (IP 43) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with testing and commissioning etc. as required.
-
-
-
... More
For 10 way, Double door SPN MCBDB
2
-
-
... More
For 14 way, Double door SPN MCBDB
2
-
-
... More
Supplying and fixing Cable End Box (Loose wire box) (IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415V, on surface/ recess, complete with testing and commissioning etc. as required.
-
-
-
... More
For 6 way, Double door TPN MCBDB
2.4
-
-
... More
For 8way, Double door TPN MCBDB
529.2
-
-
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) as required.
26
-
-
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) as required.
9
-
-
... More
Providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required.
124
-
-
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required
2470
-
-
... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
487
-
-
... More
Providing and fixing earth bus of 50 mm x 5 mm copper strip on surface for connections etc. as required.
56
-
-
... More
Providing and fixing 50 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required
101
-
-
... More
Providing and fixing of lighting conductor finial made of 25 mm dia 300 mm long, GI tube having single prong at top with 85 mm dia 6mm thick G.I Base plate including hole etc. as required
2
-
-
... More
Providing and fixing GI Tape 20mmx 3mm thick on parapet or surface of wall for lighting conductor complete as required. ( for Horizental Run)
350
-
-
... More
Providing and fixing GI Tape 20mmx 3mm thick on parapet or surface of wall for lighting conductor complete as required. ( for Vertical Run)
574
-
-
... More
Providing and fixing testing Jointing made of 20mmx 3mm thick G.I Strip 125 mm Long. With 4 nos of G.I bolts. Nuts chuck nuts and spring washers etc. as required
9
-
-
... More
Providing and Laying G.I tape 32mm x 6mm from earth electrode directoly in ground as required.
91
-
-
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.
-
-
-
... More
120 mm dia (OD-120 mm & ID-103 mm nominal)
19
-
-
... More
200 mm dia (OD-200 mm & ID-175 mm nominal)
185
-
-
... More
INSPECTION CHAMBER:
-
-
-
... More
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :
-
-
-
... More
Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets.
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
8
-
-
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.
-
-
-
... More
1 run of cable
15651
-
-
... More
2 run of cable
2922
-
-
... More
3 run of cable
1293
-
-
... More
Supply of XLPE insulated PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts. (conforming to IS-7098. (Part-I).
-
-
-
... More
3.5 core, 300 sq.mm.
1000
-
-
... More
3.5 core, 240 sq.mm.
765
-
-
... More
3.5 core, 185 sq.mm.
607
-
-
... More
3.5 core, 150 sq.mm.
306
-
-
... More
3.5 core, 120 sq.mm.
280
-
-
... More
3.5 core, 95 sq.mm.
561
-
-
... More
3.5 core, 70 sq.mm.
368
-
-
... More
3.5 core, 50 sq.mm.
365
-
-
... More
3.5 core, 35 sq.mm.
277
-
-
... More
4 core, 16 sq.mm.
11691
-
-
... More
4 core, 10 sq.mm.
10640
-
-
... More
4 core, 6 sq.mm.
6467
-
-
... More
2 core, 16 sq.mm.
219
-
-
... More
2 core, 10 sq.mm.
284
-
-
... More
2 core, 6 sq.mm.
1315
-
-
... More
Supply & Laying of following sizes of 1.1KV grade multistranded copper conductor PVC insulated cable including termination complete as required in existing cable tray.
-
-
-
... More
1C x 240 sq.mm PVC Insulated cu wire including termination etc.
210
-
-
... More
1C x 25 sq.mm PVC Insulated cu wire including termination etc.
210
-
-
... More
1C x 16 sq.mm PVC Insulated cu wire including termination etc.
380
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
-
-
-
... More
Upto 35 sq. mm
20
-
-
... More
Above 35 sq. mm and upto 95 sq. mm
20
-
-
... More
Above 35 sq. mm and upto 95 sq. mm
20
-
-
... More
Above 185 sq. mm and upto 400 sq. mm
100
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.
-
-
-
... More
Upto 35 sq. mm
39
-
-
... More
Above 35 sq. mm and upto 95 sq. mm
19
-
-
... More
Above 95 sq. mm and upto 185 sq. mm
19
-
-
... More
Above 185 sq. mm and upto 400 sq. mm
1392
-
-
... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.
-
-
-
... More
Upto 35 sq. mm (clamped with cable tie)
13651
-
-
... More
Above 35 sq. mm and upto 95 sq. mm (clamped with cable tie)
756
-
-
... More
Above 95 sq. mm and upto 185 sq. mm (clamped with cable tie)
504
-
-
... More
Above 185 sq. mm and upto 400 sq. mm (clamped with cable tie)
2393
-
-
... More
Laying of one number additional PILCA / PVC insulated and PVC sheathed / XLPE power cable of grade exceeding 1.1 KV but not exceeding 11 KV of size exceeding 120 sqmm but not exceeding 400 sq.mm direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning protective covering and refilling the trench etc. as required.
97
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
... More
2 x 6 sq. mm (19mm)
20
-
-
... More
2 X 10 sq. mm (19mm)
18
-
-
... More
2 X 16 sq. mm (22mm)
14
-
-
... More
3½ X 35 sq. mm (32mm)
2
-
-
... More
3½ X 50 sq. mm (35mm)
6
-
-
... More
3½ X 70 sq. mm (38mm)
14
-
-
... More
3½ X 95 sq. mm (45mm)
44
-
-
... More
3½ X 120 sq. mm (50mm)
6
-
-
... More
3½ X 150 sq. mm (50mm)
8
-
-
... More
3½ X 185 sq. mm (57mm)
12
-
-
... More
3½ X 240 sq. mm (62mm)
12
-
-
... More
3½ X 300 sq. mm (70mm)
102
-
-
... More
4 X 10 sq. mm (25mm) including (4x6mm)
188
-
-
... More
4 X 16 sq. mm (28mm)
236
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
100 mm wide x 50 mm depth x 1.6 mm thickness.
204
-
-
... More
150 mm wide x 50 mm depth x 1.6 mm thickness.
160
-
-
... More
300 mm wide x 50 mm depth x 1.6 mm thickness.
132
-
-
... More
450 mm wide x 50 mm depth x 2.0 mm thickness.
74
-
-
... More
600 mm width X 50 mm depth X 2.0 mm thickness
126
-
-
... More
750 mm width X 62.5 mm depth X 2.0 mm thickness
146
-
-
... More
900 mm width X 62.5 mm depth X 2.0 mm thickness
126
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
100 mm wide x 50 mm depth x 1.6 mm thickness.
12
-
-
... More
150 mm wide x 50 mm depth x 1.6 mm thickness.
11
-
-
... More
300 mm wide x 50 mm depth x 1.6 mm thickness.
8
-
-
... More
450 mm wide x 50 mm depth x 2.0 mm thickness.
8
-
-
... More
600 mm width X 50 mm depth X 2.0 mm thickness
7
-
-
... More
750 mm width X 62.5 mm depth X 2.0 mm thickness
8
-
-
... More
900 mm width X 62.5 mm depth X 2.0 mm thickness
8
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
100 mm wide x 50 mm depth x 1.6 mm thickness.
11
-
-
... More
150 mm wide x 50 mm depth x 1.6 mm thickness.
10
-
-
... More
300 mm wide x 50 mm depth x 1.6 mm thickness.
10
-
-
... More
450 mm wide x 50 mm depth x 2.0 mm thickness.
8
-
-
... More
600 mm width X 50 mm depth X 2.0 mm thickness
8
-
-
... More
750 mm width X 62.5 mm depth X 2.0 mm thickness
8
-
-
... More
900 mm width X 62.5 mm depth X 2.0 mm thickness
8
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Cross member"(galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.
-
-
-
... More
100 mm width X 50 mm depth X 1.6 mm thickness
11
-
-
... More
150 mm width X 50 mm depth X 1.6 mm thickness
10
-
-
... More
300 mm width X 50 mm depth X 1.6 mm thickness
10
-
-
... More
450 mm width X 50 mm depth X 2.0 mm thickness
8
-
-
... More
600 mm width X 50 mm depth X 2.0 mm thickness
8
-
-
... More
750 mm width X 62.5 mm depth X 2 mm thickness
8
-
-
... More
900 mm width X 62.5 mm depth X 2.0 mm thickness
8
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “Reducer” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
100 mm wide x 50 mm depth x 1.6 mm thickness.
11
-
-
... More
150 mm wide x 50 mm depth x 1.6 mm thickness.
10
-
-
... More
300 mm wide x 50 mm depth x 1.6 mm thickness.
10
-
-
... More
450 mm wide x 50 mm depth x 2.0 mm thickness.
8
-
-
... More
600 mm width X 50 mm depth X 2.0 mm thickness
8
-
-
... More
750 mm width X 62.5 mm depth X 2 mm thickness
8
-
-
... More
900 mm width X 62.5 mm depth X 2.0 mm thickness
8
-
-
... More
Supplying, installing by suspension on ceiling, testing and commissioning of following capacity Sandwich Type Rising Mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply with metal clad enclosure having IP-54 rating after fixing the tap off boxes and all accessories, made of 1.6mm thick steel sheet duly powder coated in convenient sections complete with 4 Nos aluminium bus bars having current density of 130 A/ sq cm atnominal current rating, necessary joints, elbow joints & expansion joints and bends, fire barrier at each floor, provision of tapping at every metre, adopter box and copper flexible for joints, continuous earthing with 2 Nos aluminium strip of suitable size (one on each side) including, G.I. clamping brackets, suspenders, angle iron bracket, steel fasteners, connecting to earthing system etc. as required.
-
-
-
... More
400 A 25kA SC for 1 sec
20
-
-
... More
630 A 50kA SC for 1 sec
60
-
-
... More
1000 A 50kA SC for 1 sec
20
-
-
... More
Supplying, installation, testing & commisioning of following capacity Plug In/ tap off box on the existing Air Insulated Compact Type bus trunking/ rising mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply made with 1.6mm thick sheet steel enclosure (IP54) duly powder coated with provision of MCCB/ACB (but without MCCB/ACB) complete etc. as required
-
-
-
... More
125 A 15kA SC for 1 sec (including 100A)
1
-
-
... More
200 A 25kA SC for 1 sec (Including 160A)
29
-
-
... More
250 A 30kA SC for 1 sec
2
-
-
... More
400 A 35kA SC for 1 sec (Including 300A)
1
-
-
... More
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes cubicle panel, making connections, etc. as required.
-
-
-
... More
100 A, 35 KA,TPMCCB
1
-
-
... More
200 A,36KA,FPMCCB
30
-
-
... More
250 A,36KA,FPMCCB
2
-
-
... More
400 A,35KA,FPMCCB
1
-
-
... More
Supplying, installation, testing & commisioning of following capacity End Feed Unit for the existing Air Insulated Compact Type bus trunking/ rising mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply made with 1.6mm thick steel sheet enclosure (IP54) duly powder coated with rovision of MCCB/ACB (but without MCCB/ACB) complete with necessary joints including clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system etc. as required
-
-
-
... More
630 A 50kA SC for 1 sec
4
-
-
... More
1000 A 50kA SC for 1 sec
2
-
-
... More
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes cubicle panel, making connections, etc. as required. 630 A,50KA,FPMCCB
4
-
-
... More
Design, Manufacturing, Supply, Receiving, Unloading, Shifting, Installation, Testing & Commissioning of following End Feed Unit housing fabricated out of 14G CRCA powder coated (as approved) sheet steel for the Rising Mains fitted with following ACB. The End Feed Unit should complete with solid aluminium links of rated capacity of ACB to Rising Mains. The End Feed Unit should be complete with suitable size of glands plate for incoming cables. All MCCB / ACB shall have Ics value of 50 KA. Each end feed unit shall have a set of 3 nos. phase LED Type indicating lights with control fuses.
-
-
-
... More
1000A FP MDO ACB, 50 KA
2
-
-
... More
1250A FP MDO ACB, 50 KA
1
-
-
... More
Supply, erection, testing and commissioning of following sizes of TV splitter of aluminium die cast body in suitable size of G.I. Box. 4 way
5
-
-
... More
Supply, erection, testing and commissioning of following co-axial cable in existing conduit. RG-11
98
-
-
... More
Supply & installation of 32 Amp 3 phase, 415 volt, 50 Hz water tight (IP-55) socket outlet with interlocking switch complete with all fixing accessories.
4
-
-
... More
Supply & installation of 32 Amp single phase 240 Volt, 50 Hz, water tight (IP-55) socket outlet with interlocking switch complete with all the fixing accessories as below.
4
-
-
... More
Supply & fixing of following size (GP RACEWAY- Fabricated from GP Sheet) race ways for electrical & LV wiring including neoprene gasket in joints, cutting the floor & jaming the race way / hanging in ceiling, supporting arrangement as approved by consultant / architect with all necssary hard ware (including civil work) as per site requirement. The thickness of raceway & cover shall be as per technical specification.
-
-
-
... More
100 mm wide x 40 mm deep.
264
-
-
... More
150 mm wide x 40 mm deep.
146
-
-
... More
200 mm wide x 40 mm deep.
185
-
-
... More
250 mm wide x 40 mm deep.
68
-
-
... More
300 mm wide x 40 mm deep.
136
-
-
... More
Supply & fixing of following size of Raceway Junction Box made out of GP Sheet for electrical & LV wiring including, cutting the floor & jaming the junction box / hanging in ceiling, supporting arrangement as approved by consultant / architect with all necssary hard ware (including civil work).(Junction box to be provided as per drawing/ as per site requirement & as per specification). The thickness of junction box shall be a as per thechnical specification.
-
-
-
... More
150 mm wide x 50 mm deep.
30
-
-
... More
200 mm wide x 50 mm deep.
14
-
-
... More
250 mm wide x 50 mm deep.
21
-
-
... More
300 mm wide x 50 mm deep.
11
-
-
... More
350 mm wide x 50 mm deep.
14
-
-
... More
Supply, Installation, Testing & Commissioning of Earthing Junction Box size - 400mm x 300mm x 80mm made out of 16 SWG CRCA sheet with seven tank process & powder coating, earthing link (32mm x 6mm copper strip) front door with glass as complete as required.
2
-
-
... More
Supply & Fixing of Rubber mat 1000 mm. Wide to withstand 1.1 KV dielectric strength as per latest IS 15652-2006.
13
-
-
... More
Supplying and Laying of Rubber mat 1000 mm. Wide to withstand 11 KV dielectric strength as per latest IS 15652-2006 etc. as reqd.
1
-
-
... More
Supplying & Placing of First aid box as approved by St.John Ambulance Brigade /Indian Red Cross society conforming to IS : 2217 - 1963 etc as reqd.
1
-
-
... More
Supplying & Installation of Shock treatment chart duly mounted on a wooden frame with glass on, as required in 2 languages (Hindi & English) etc. as reqd
1
-
-
... More
FIRE ALARM SYSTEM (ADDRESSABLE TYPE) AND PA SYSTEM
-
-
-
... More
Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications.
-
-
-
... More
Ten Loop Panel.
1
-
-
... More
Supplying, installation, testing & commissioning of central graphical fire alarm management system to centrally monitor and operate the fire alarm system complete as required.
1
-
-
... More
Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector acclimate type sensetive level (0.524%) OVS/ft. complete with mounting base complete as required.
1075
-
-
... More
Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required.
8
-
-
... More
Supplying, installation, testing & commissioning of addressable manual call point complete as required.
22
-
-
... More
Supplying, installation, testing & commissioning of addressable fire control module complete as required.
31
-
-
... More
Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required. (75 DBA @3 mtr. & 75CD flashing)
27
-
-
... More
Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required.
586
-
-
... More
Supplying, installation, testing & commissioning of fault isolator complete with base as required.
56
-
-
... More
Supply, installation, testing and commissioning of addressable monitor module complete as per specification.
21
-
-
... More
Supplying, installation, testing & commissioning of fire fighter telephone handset complete as required. Same make as of Fire Alarm System
1
-
-
... More
Supplying, installation, testing & commissioning of fire fighter phone jack complete as required. Same make as of Fire Alarm System
22
-
-
... More
Supply Installation, Testing & Commissioning of fire fighter main console at control room including power supply and accessories.
1
-
-
... More
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
11383
-
-
... More
Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required.
2
-
-
... More
Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required.
2
-
-
... More
Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required.
230
-
-
... More
Supplying, installation, testing & commissioning of digital audio amplifier 480 Watt, supply complete as required.
3
-
-
... More
Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. Speaker cable Single pair, 2-core, 1.5 sqmm
2457
-
-
... More
SUPPLY & INSTALLATION OF LIGHT FIXTURES & FANS
-
-
-
... More
SITC of following rating recess / surface mounted LED round / square shape down light luminarie with pressure die cast housing for single phase supply voltage Luminarie shall be confirm to IS: 10322 part -5 / section -2 or IEC :62722 withh all neccesary accessories as required.
-
-
-
... More
12W LED Round Down Light
260
-
-
... More
15 / 16 W LED Round Down Light
224
-
-
... More
18 /20 W LED Round Down Light
91
-
-
... More
18 /20 W LED Round Down Light
452
-
-
... More
2' x 2' LED Panel Light
1124
-
-
... More
Bulk Head fitting with 9/10Watt LED.
52
-
-
... More
S.I.T.C of following rating surface mounted LED Tube Lighting Fitting Suitable for 230V 50 Hz, Single Phase Supply etc. complete as required.
-
-
-
... More
10/12 W LED Tube Light
81
-
-
... More
20/22 W LED Tube Light
320
-
-
... More
SITC of 300 mm (12") Exhaust fan (Metal body) suitable for single phase 230 volts, 50 Hz., AC supply complete with motor, louvers/shutters etc. complete as required.
18
-
-
... More
Supply Installation, Testing & Commissioning of following sizes ceiling fan 3 Blades confirming to IS:374:2019 including wiring the down rods of standard (up to 30cm) with 1.5 sq.mm FR PVC insulated copper wire suitable for 230V 50 Hz, Single phase supply etc. complete as required. 1200 mm ( 48") BLDC 5 Star rating 32W Ceiling Fan
283
-
-
... More
Supply of 31W Watt, surface Type, LED Bed Head light fixture, having minimum system lumen output of 100 Lumen / watt complete as requried. (Make : Wipro Cat. No.LW04-411-XXX-57-WS, Bed Head Light)
229
-
-
... More
S.I.T.C of Following rating LED Street Lighting luminare with pressure die cast housing and toughened glass cover (IP 66 protection ) in existing pole / pipe for supply voltage 100-270 AC 50Hz Luminare shall be confirm to IS :10322 part 5/ section-3 and shall be complete with all nessessary accessories as required. 60W LED Street Light
29
-
-
... More
S.I.T.C of Following rating LED Post Top lamp made in die cast aluminium housing with decorative clear / opel acrylic diffuser on existing pipe including connection with 1.5sq.mm coppwr conductor etc all complete as required. 20/25W LED Post top lamp clear
4
-
-
... More
S.I.T.C of Following rating approved make LED Bpllard Fitting with cylindrical shape and inverted cone shape head of height 600 to 850 mm power input -8/9 watt with die cast aluminium housing opel with PC diffuser, IP-65/54 protection, conferming to IS : 10322 part 5 etc all complete as requird. (Excluding Plinth Charge.)
20
-
-
... More
Supplying & installation of 7 mtr. Height Octagonal Hot Dip galvanized pole (BOP. 7030) with top dia 70 mm bottom dia 130 mm & made of 3 mm thick sheet base plate dimensions 200x200x12 mm (LxBxT) including suitable size of foundation bolt all complete as required (without Arm).
35
-
-
... More
1m Single Arm Suitable for 70MM Top
35
-
-
... More
UPS SYSTEM
-
-
-
... More
Supply, Installation, Testing & Commissioing of 250 KVA UPS in paralleling mode at 0.99 input power factor with SNMP card, compatible for BMS connectivity on backnet/MODBUS, Inbuilt Isolation transformer as per specification given in the document with following broad features.
-
-
-
... More
THD(i) shall be less than 3% in the entire loading range.
-
-
-
... More
UPS shall carry design output at 40 deg.
-
-
-
... More
Shall have soft start and hold of for incoming supply.
-
-
-
... More
Invertor capability to supply 150% load for 5 sec.
-
-
-
... More
Three Phase Input and Three Phase Output. (Input - 340V - 470V, Three Phase, 4 wire. / Output - 400-415 Volt, Three Phase, 4 Wire.)
-
-
-
... More
Shall not allow deep discharge of the battery and shall not go to 10.5 volts in case of 12 volt cells.
-
-
-
... More
Battery shall be external type with rack and suitable for 30 minute backup on 100% load.
-
-
-
... More
Suitable size of copper cable between UPS and battery bank shall be provided
-
-
-
... More
UPS shall be compatible for 6 nos unit in parallel operation. (Synchronize). Parallel operation kit shall be supplied with UPS.
-
-
-
... More
UPS described as above
2
-
-
... More
Supply, fitting, fixing, testing and installation of 30 KVA, ON Line UPS three phase input and three phase out put power system of in put voltage range 360V/380/V/400V/485V AC , Frequency range 40 HZ to 60 Hz, +/- 10% and out put voltage range 415V +/-1%, AC frequency range, 50Hz, +/-1% poower factor 0,8/3.1, Harmonic distrortion - 2% THD (Linear Load): 5% THD (Non- Liniear Load) along with required Batteries, Battery Stand, UPS Box Battery Lead etc as required.
-
-
-
... More
UPS shall carry design output at 40 deg.
-
-
-
... More
Shall have soft start and hold of for incoming supply.
-
-
-
... More
Invertor capability to supply 150% load for 5 sec.
-
-
-
... More
SNMP card, compatible for BMS connectivity on backnet/MODBUS, Inbuilt Isolation transforme.
-
-
-
... More
Shall not allow deep discharge of the battery and shall not go to 10.5 volts in case of 12 volt cells.
-
-
-
... More
Battery shall be external type with rack and suitable for 90 minute backup on 100% load.
-
-
-
... More
Suitable size of copper cable between UPS and battery bank shall be provided
-
-
-
... More
UPS shall be compatible for 3 nos unit in parallel operation. (Synchronize). Parallel operation kit shall be supplied with UPS.
-
-
-
... More
SITC of MS Battery Rack suitable for 30 to 35 UPS Battery Installation.
-
-
-
... More
SITC of 72 nos. 65 AH Flat type Sealed Maitanace Free (SMF) Battery with 24 months replacement warranty. IS:1652:1991. (VAH Required minimum 56160 for 50 KVA UPS (65AH x 72 Nos. x 12V = 56160 VAH)
-
-
-
... More
Total cost of 1 Set 30 KVA UPS, Batteries & Accessories (A+B+C)
2
-
-
... More
DATA, TELEPHONE SYSTEM INCLUDING ACTIVE COMPONENTS
-
-
-
... More
Supply, Installation, Testing & Commissioning of Patch Panel Cat 6 U/FTP 24 Port- Loaded as per technical specification.
28
-
-
... More
Supply, Installation, Testing & Commissioning of Patch Panel Cat 6 U/FTP 48 Port- Loaded as per technical specification.
1
-
-
... More
Supply, Installation, Testing & Commissioning of Patch Cord Cat 6 U/FTP 3 feet as per technical specification.
480
-
-
... More
Supply, Installation, Testing & Commissioning of Patch Cord Cat 6 U/FTP 7 feet as per technical specification.
101
-
-
... More
Supply, Installation, Testing, Commissioning of Cat 6, 10G, U/FTP, Information Outlet including G.I. Box and modular cover plate as per technical specification.
581
-
-
... More
Supply , Installtion , Testing and comissioning of 15U wall mount rack with fans , 2 cable managers, satationary shelf , 2 Nos of hardware pkts as per technical specification.
10
-
-
... More
Supply, Installation, Testing & Commissioning of Network Rack 42 U with below included: Network Rack 800W x 2000H x 800D, Top cover with 4 x cutout, 2 x cutout for cable entry. Bottom cover with 4 x cutout for cable entry. All cutouts blanked with Plastic caps. 2 pairs, 42 U 19" Profile Type angle,Front & etc. complete as per technical specification.
1
-
-
... More
Supply, Installation, Testing & Commissioning of 24 port 10/100/1000Mbps, 4SFP module, L-2 Switch, POE as per technical specifications.
34
-
-
... More
Supply, Installation, Testing & Commissioning of 48 port 10/100/1000Mbps, 4 SFP Module, L-2 Switch, POE as per technical specifications.
1
-
-
... More
Supply, Installation, Testing & Commissioning of IP Based voice Communication System with 04 Port Voicemail ,04 Port FXS ,04 Port FXO ,1 PRI Trunk lines (30 Ch) Circuit with CLIP Facility , 500 IP users License ,01 Nos. IP Operator Console, 30 Party Conference ,Speed Dial, Music on Hold , Internal/ External ring difference ,Call Barring, Call Pickup, - Redundant server in active-Active mode as per technical specification.
1
-
-
... More
Supply, Installation, Testing & Commissioning of Type 1 IP Phone . Graphic LCD display with backlight 3 user accounts with multi-line appearance keys Local and company-wide phone directories.
2
-
-
... More
Supply, Installation, Testing & Commissioning of Type Basic Phone account , Full duplex speaker phone, .
60
-
-
... More
Supply, Installation, Testing & Commissioning of Core Switch 24 1Gb/10GBASE-T ports, 2 10Gb/40Gb QSFP+ ports, 4 10Gb/25Gb/40Gb/50Gb/100Gb capable QSFP28 ports, 2 populated power supplies slots, with suitabe fan module slots, supporting RIP, OSPF, VRRP L3 protocols from day one as per technical specification.
1
-
-
... More
Supply, Installation, Testing & Commissioning of SFP+ 10GBASE-SR 10 Gigabit Ethernet Optics, 850 nm for up to 300 m,transmission on multimode fiber (MMF).
1
-
-
... More
Supply, Installation, Testing & Commissioning of 6 Core OM4 Multimode Fiber Cable as per technical specification.
116
-
-
... More
Supply, Installation, Testing & Commissioning of 24 Port LC multimode loaded LIU.
11
-
-
... More
Supply , Installtion , Testing and comissioning of 48 port loaded LIU for core switch to access switch connectivity over fiber.
3
-
-
... More
Supply, Installation, Testing & Commissioning of LC - LC Fiber patch cord OM4, 3 Mtrs.
68
-
-
... More
Supply, Installation, Testing & Commissioning of 6 Core, Single Mode, OS2 as complete as required.
38
-
-
... More
Supply, Installation, Testing & Commissioning of wifi Access point as complete as required.
6
-
-
... More
IP CCTV SYSTEM
-
-
-
... More
Supplying, installation, testing & commissioning of 4MP or better IP Network TDN Low-Light IR Rugged Dome Camera, 1/3" CMOS or better, 4MP (2592 x 1520) @ 20fps or better, triple stream at various resolution up to 25fps, Min. Illumination required 0.01 lux @ F2.0 (color), 0 Lux IR On, 4 IR LEDs Smart IR with upto 30m IR distance, Auto ICR (Infrared Cut Filter) 120dB True WDR, S/N Ratio 55db, Shutter Speed 1 - 1/100,000; Adavance Video Compression technology such as H.265 & H.264 High Profile & MJPEG , Triple stream, , Stream Encryption, 256GB SD card support, PoE (802.3 af) and 12V DC, Max 6W, IP 66/67, IK 10 vandal proof with Die Cast Aluminium Housing, Having Operating temp range : –30°C to 60° C. Certifications: ONVIF Profile S/G/T compliant, UL.
43
-
-
... More
Supplying, installation, testing & commissioning of 4MP IP Network TDN Low-Light IR Rugged Bullet Camera, 1/2.7" CMOS or better, 4MP (2592 x 1944) @ 25fps or better, triple stream at various resolution up to 25fps, Min. Illumination required 0.008 lux @ F1.6 (color), 0 Lux IR On, 4 IR LEDs Smart IR with upto 50m IR distance, Auto ICR (Infrared Cut Filter) 120dB True WDR, S/N Ratio 50db, Shutter Speed 1/8 - 1/30,000; Adavance Video Compression technology such as H.265 & H.264 High Profile & MJPEG , Triple stream, 2.7 to 13.5mm 5X motorized focus & zoom lens, Field of View FoV H:85°-24°, BLC, HLC, 3DNR White Balance, Minimum Edge Intelligence Video Analytics : Motion Detection, Face Detection, 4Privacy Mask, 4 Region Of Intreset, TLS1.2, AES-128/256, SSH/Telnet closed, Stream Encryption, 256GB SD card support, PoE and 12V DC, Max 6W, IP 66/67, IK 10 vandal proof with Die Cast Aluminium Housing, Having Operating temp range : –30°C to 60° C. Certifications: ONVIF Profile S/G/T compliant, UL.
10
-
-
... More
Supplying, installation, testing & commissioning of Outdoor 1/2.8 inch CMOS 2MP or better, IR PTZ Camera ; 40x Optical Zoom & 16x Digital Zoom, tripple stream; IR distance: 200 meter or better; Lens 4 -175mm Motorized Auto focus zoom lens; Memory card slot: Min 256GB support. Minimum Illumination- Sense up on- Color: 0.001 lux color, B/W: 0 lux IR On, WDR 120dB, Edge Video Analysis Video Motion Detection, Intrusion, Lioter, Counter & Tampering, 3DNR, BLC, HLC, White Balance, EIS, Defog, Mechanical switchable IR filter (Auto ICR), Pan Range 360° continuous, Tilt Range -10° to 90°, Pan/Tilt Modes - Pan: 0.1°/s - 180°/s; Tilt: 0.1°/s - 90°/s, Presets 200, Preset Accuracy 0.25 Deg, 16 Patrol & Tours, Alarm I/O - 2In/2Out, 2-Way Audio- 1/1 Channel In/Out, 256GB Memory card slot, 4 individually configurable privacy masks, 4 Region of Interest, POE+ or 24VAC 3A for indoor/Outdoor application, IP66/67, IK 10 ; Certifications: ONVIF Profile S/G/T compliant, UL.
1
-
-
... More
Supplying, installation, testing & commissioning of IP Network Video Storage Manager Server
Channel Network Video Storage Manager Server - NSM shall have Intel® Xeon Silver 4210R, 2.2 GHz or better, Mnimum 32GB RAM, 1+1 750W hot plug redundant power supply, OS drive: 2 x 240 GB in RAID 1; 12 field upgrade up to 20 TB SATA/SAS hard drive options for Video Recording, Data RAID Level: 0, 1, 5, 6, 10. NIC card 4 x 1GbE supporting network throughput of 800 MBPS, Windows Server 2019 R2 64- bit/Windows10 64-Bit IOT Operating System, Microsoft SQL Server/Express 2019. NSM Shall support upto 128 Cameras @ 1080P, 25fps, 09 Remote Client Licenses inbuilt, Web Clients, Monitor Layout up to 4x4, Digital Signature for Video Clip, Continous & Motion Based Recording options, up to 8X forawrd & backward palyback, Playback search as date/time timeline, time jump FWD/REV, bookmarks, calendar, preview, film strip, event search and SMART Motion Search as a min. NVR shall be ONVIF S/G/T certified and liested on ONVIF Website. NVR shall Support Two -Way Audio with cameras equiped with Microphone & Speaker. Each NSM shall be offered with 128TB Video Stoarge for Recording for 30 days.
1
-
-
... More
Supply, Installation, Testing and commissioning of Managable 24 port Switch with Power on Ethernet (PoE) enabled, 10/100, RJ45 Access ports with PoE complete as required.
3
-
-
... More
Supply, installation, testing and commissioning of of 16 TB HDD all accessories complete as required.
2
-
-
... More
Supply installation and commissioning of 48 inch LED monitor for disply of camera.
2
-
-
... More
SOLAR PHOTO VOLTAIC POWER GENERATION SYSTEM
-
-
-
... More
Supplying installation testing and commissioning of Grid interactive roof top solar photo voltaic power generation system including all the required accessories like Solar PV module, Grid Tie invertor, arrey junction box, cabling & wiring, earthing, surge protection device, FRLSame structure for mounting of solar panel. The cell shall be poly crystaline silicon cells of 6 inch each and module efficiency shall be more than 17%. Solar module shall have linear output warranty with degradation not exceeding 0.7% FRLSom 2nd Year onwards. Minimum 80% power output must be assured at end of 25 years. The FRLSont glass of solar module shall be low iron tempered glass ARC type. Termination box shall be Thermo-plastic, IP 67 or better, UV resistant with built-in-bypass. The nominal power of a single PV module shall be minimum 540 Wp or higher. Positive power tolerance modules only to be used. RF identification tag for each solar module shall be provided inside the module and must be able to withstand environmental conditions. The solar panel shall be complience of IEC 61215, IEC 61730 certified by TUV Rheinland / UL. The solar panel shall be installed as per BOQ & detailed technical specification.
25
-
-
... More
AUTOMATIC FIRE DETECTION GAS SUPPRESSION SYSTEM
-
-
-
... More
For Main LT Panel, Lift Panel & Fire Fighting
-
-
-
... More
Supply, fixing, testing and commissioning of Supply, fixing, testing and commissioning of Automatic Linear pneumatic Tube Detection based FK 5-1-12 Pre-Engineered System for Electrical Panels (consisting of the following components.) Approved Makes - Firemech / Ceasefire / Tyco / Honeywell
-
-
-
... More
4.0 KG UL Listed Cylinder Automatic Pre-Engineered System filled with Clean Agent FK 5-1-12, Fitted with DLP Valve mounted on Cylinder Push-In-Connector for Tube, Mounting Bracket, End of Line Adopter and UL Listed Low Pressure Switch for Monitoring System Activation.
2
-
-
... More
9.0 KG UL Listed Cylinder Automatic Pre-Engineered System filled with Clean Agent FK 5-1-12, Fitted with DLP Valve mounted on Cylinder Push-In-Connector for Tube, Mounting Bracket, End of Line Adopter and UL Listed Low Pressure Switch for Monitoring System Activation.
2
-
-
... More
UL Listed Linear Pneumatic Heat Detection Tube with all necessary fittings & supports, HR Grade,UV Protected, MultiLayered, Made of Special Modified Polyamide Material, Inner diameter 4mm, Outer Diameter 6MM, Operating Pressure 15 8Bar, Maximum Pressure 30 Bar at maximum Temperature of +65 Degree C, Pressurized.
200
-
-
... More
Master Control Unit with Audio Visual Alarm with wiring to make complete system operational. The Control Panel should have provision for integration with Fire Alarm/SCADA/BMS System (Supply to be provide by the end client at 220 Volt AC).
4
-
-
... More
For Server Room
-
-
-
... More
Supply, fixing, testing and commissioning of UL Listed & PESO Approved High Pressure Seamless BIS 7285 approved Cylinders with contact Pressure Gauge & PESO Approved Valve, Including all fittings and accessories with Respective size mounting bracket. The cylinder size to be considered respective to filling density allowed by OEM
-
-
-
... More
140 Ltr (Master Cylinder)
1
-
-
... More
140 Ltr (Slave Cylinder)
1
-
-
... More
FK 5-1-12 manufactured by 3M, with Zero Ozone Depeltion Potential and Very Low Global Warming Potential of 1 with 20 Years Blue Sky Warantee against any regulatory Bans and Restrictions.
35
-
-
... More
Master Cylinder Kit complete Comprising all mandatory accessories : Electric Actuator, Manual Release Device, Discharge Hose - DN 50, Manifold Check Valve, Reset Toolkit, Cylinder Strap, Caution Advisory Signage’s, System should include Electric Control Head operated electrically from the detection and control system with a manual actuator and Wire Braided Flexible Rubber Hose with Elbow and connectors complete assembly to Connect FK 5-1-12 Cylinder Assembly Discharge outlet with Discharge Pipe or Discharge Manifold. On any displacement of solenoid valve, master cylinder kit shall be able to notify the fault by audio/visual mean.
1
-
-
... More
Slave Cylinder Kit Complete Comprising all mandatory Accessories: Pneumatic Release Device, Actuation Hose, Discharge Hose - DN 50, Manifold Check Valve, Cylinder Straps & Caution Advisory Signage’s to Connect FK 5-1-12 Slave Cylinders.
1
-
-
... More
Discharge Nozzles to Discharge FK 5-1-12 Gas in the Hazard Area as hydraulic calculation and flow rate required in 180 Deg/360 Deg Discharge Pattern.
1
-
-
... More
Supply, fixing, testing and commissioning of 'Discharge Pipe with Support and Fittings, CS Seamless to ASTM A-106 Schedule 40/50. along with threaded fittings of 3000# conforming to ANSI B 16.11
1
-
-
... More
Supply, fixing, testing and commissioning of 2 Zone Microprocessor Based Automatic Gas Extinguishing Panel with 2 Batteries. Two Zone automatic extinguishing panel should be CE Approved and Operates on 220-240 VAC, 10%, 50 Hz, 100W. Consisting Smoke Detector/Heat Detector/Multi Detector, Manual Release Switch. The Manual release switch module shall comply with the requirements of BS7273-1/UL, Abort Switch. The Abort switch module shall comply with the requirements of BS7273-1/UL, Hooter with Strobe Light, Response Indicator & Discharge And Pre Discharge Indicator., along with Loop Cable (2C x1.5mm) Armoured.(Fire Alarm System with respect to Room size)
1
-
-
... More
PLUMBING WORKS
-
-
-
... More
SANITARY INSTALLATIONS
-
-
-
... More
Supplying , fitting and fixing vitreous white glazed earthen ware I.W.C of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I 'p' trap 15 liters C.I.pull and let go flushing cistren of names or other I.S.S. equivalent make , complete with all fitting , C.I.or C.C. brackets 32mm alkathene/P.V.C telescopic flush , pipe about 2 M long with one brass coupling and clamps GI ,chain and pull including supplying and fixing a pair of vitreous white glazed earthenware ware footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less thane 50grms. 15mm P.V.C. connection pipe 450 mm. long and the exposed pipe and cistern with two coats of approved paint over a coats of red oxide primer etc. all complete as per specification and direction of E/I.
-
-
-
... More
(A) 580 mm. long
-
-
-
... More
(c) With 10 lit. low level PVC Cistem
10
-
-
... More
Supplying, fitting and fixing 40mm high vitreous white glazed earthen E.W.C. with ‘p’ trap of parry hindustan or any other approved I.S.S. make including supplying and fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I.handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450grams 15mm P.V.C. alkathene pipe 45cm. long with brass coupling at both ends and white/black plastic solid state seal and lead of commander/cuckoo or other I.S.S. make with hinges or screws etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide priming, all complete
as per specification and direction of E/I.
-
-
-
... More
(ii) E.W.C. with 'S' trap
-
-
-
... More
(b) 10 lit. low level PVC Cistem
30
-
-
... More
Providing and fixing white vitreous china battery based infrared sensor
operated urinal of approx. size 610 x 390 x 370 mm having pre &
post flushing with water (250 ml & 500 ml consumption), having
water inlet from back side, including fixing to wall with suitable
brackets all as per manufacturers specification and direction of
Engineer-in-charge.
24
-
-
... More
Supplying fitting and fixing vitreous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S. approved make supported on painted C.I. or R.S. brackets 32mm C.I.brass waste, 15 mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I.
60
-
-
... More
Supplying fitting and fixing white glazed fire’s clay sink of approved make with overflow arrangements supported on C.I. or R.S. painted brackets 40mm. dia C.P.brass waste with C.P.brass chain and rubber plug 40 mm dia P.V.C. waste pipe about 750mm long with brass coupling at one endand 15mm C.I. body brass spindle bib cock of approved quality of weight not less than 450grams. including cutting wall and making good the same etc. all complete as per specification and direction of E/I. (i) Kitchen sink 600 mm x 450 mm x 250 mm
9
-
-
... More
(b)Mirrors of 6mm thick plate glass bevelled edge mirror including C.P. brass revolving fittings 3mm ply wood board and C.P. hinges to fix with mirror.
-
-
-
... More
(i) 600mm x 450mm size
50
-
-
... More
(c)(iii) C.P. brass liquid soap container
68
-
-
... More
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitionsby cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade
24
-
-
... More
Provinding and fixing wash basin wih C.I brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls whereever required : White Vitreous China Wash basin size 550x400 mm with a 15mm CP Brass single hole basin mixer
18
-
-
... More
Providing and fixing white vitreous china laboratory sink with CI brackets , C.P brass chain with rubber plug 40 mm C.P brass waste and 40 mm CP brass trap with necessary C.P brass unions complete including painting of fittings and brackets , cutting and making good the wall wherever required : Size 600x450x200 mm
20
-
-
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in charge.
40
-
-
... More
Providing & fixing PVC waste pipe for sink including PVC waste fitting Complete Flexible Pipe 32mm Dia
42
-
-
... More
Providing and fixing toilet paper holder : C.P. brass
40
-
-
... More
Providing and fixing PTMT Bottle Trap for Wash basin. Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms.
84
-
-
... More
Providing & fixing PTMT towel ring trapezoidal shape 215 mm long 200 mm wide with minimum distance of 37 mm from wall face with concealed fittings arrangement of approved quality and colour weighing not less than 88 gms
68
-
-
... More
Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore
370
-
-
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore
41
-
-
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 a) 15 mm nominal bore.
250
-
-
... More
Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms
84
-
-
... More
Providing and fixing CP brass single lever low flow Sink mixer with 15 mm CP brass single lever pillar cock with pop up and waste complete including cutting and making good the walls where required.ROCA make (Model -RT5A3060C00) or Equivalent.
20
-
-
... More
Providing and fixing C.P concealed four way diverter with thermostatic mixer with shut off valve and diverter, including cutting and making good the walls, wherever required. (Make:- Jaquar - Four way diverterKUB-35421, Thermostatic mixer 35671 or Equilent)
10
-
-
... More
Providing & Fixing of Grab Bar size 300mm long in handicap toilet complete as required.Makes & Model No.Jaquar AKP-35701P or Equivalent.
10
-
-
... More
Providing,Fixing satin finish stainless steel AISI 316 grade wall mounted coat hook on door complete. The rate include cost of all material & labour involved in the item complete and all as per direction of engineer incharge. MAKE JAQUAR MODEL NO.- ACN-1161N or EQUIVALENT.
40
-
-
... More
Supply, installation, testing and commissioning built with Drinking Water R.O. unit with micron filtration pre-treatment unit, skid mounted R.O. module with pressure pump and pressure tank, drinking water cooler (High quality SS Tank for Storage 80 lts) , complete in all respects. ( Make & Model No. Eureka Forbes Pure Chill RO Storage Cooler cum Purifier or Equivalent)
5
-
-
... More
DRAINAGE INSTALLATIONS
-
-
-
... More
Providing, fixing, testing and commissioning of UPVC SWR pipe type 'B' conforms to IS : 13592-1992 with all fittings such as bends, tees, elbow, 'Y', offset, cleaning pipe door, clamps etc. conforming to IS:14735-1999 and steel structural supports etc. including cutting the floors, walls and making good the same in cement concrete 1:2:4 & cement mortar 1:4. The wall thickness of pipe and technical characteristic conforms to IS : 13592-1992 type 'B'. The fitting dimension conforming to IS : 14735-1999. The jointing to be completed with rubber ring joint/solvent weld joint as required/applicable.
-
-
-
... More
75 mm (OD)
253
-
-
... More
110 mm (OD)
1000
-
-
... More
Providing, fixing, testing and commissioning of UPVC 'P' trap/floor trap/urinal trap of self cleansing design having 50 mm water seal with or without horn conforming to IS : 14735-1999 including setting with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 hard stone ballast 20 mm nominal size) including cost of cutting and making good the walls & floors wherever required. 110 mm inlet x110 mm outlet.
150
-
-
... More
Providing, fixing, testing and commissioning of UPVC inlet fittings (hopper) receive waste from fixture waste with maximum 3 inlets 40, 50 & 63 mm OD size, fabricated from 110 OD UPVC SWR pipe, UPVC sockets, fixed to UPVC traps including solvent weld joint/rubber ring joint, complete with all civil work set in cement concreate 1:2:4 as required including cost of cutting and making good the walls & floors wherever required.
55
-
-
... More
Providing, fixing, testing and commissioning of UPVC cleanout plug conforming to IS : 14735-1999 complete with all fitting; accessories and civil work. 110 mm OD
50
-
-
... More
Providing, fixing, testing and commissioning of UPVC waste Pipe conforming to IS : 4985-2000 class III including all moulding fittings conforming to IS : 7834 (Part-1 - Part -7) 1987 such as tees, bends, reducers, coupling, adopters etc. solvent welded joint as per manufacturer recommendation including cutting and making good the walls, floors, R.C.C. work etc. (For fixtures waste).
-
-
-
... More
40 mm (OD)
242
-
-
... More
50 mm (OD)
4
-
-
... More
63 mm (OD)
81
-
-
... More
Providing and fixing UPVC floor drain including all fitting and accessories fixed in cement mortar complete in all respect.
-
-
-
... More
75 mm OD x 63 mm OD
80
-
-
... More
110 mm OD x 63 mm OD
115
-
-
... More
Providing and fixing MS holder bat clamps of approved design to cast iron (spun) pipe embedded in and Including cement concrete blocks 10 x10 x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc.
-
-
-
... More
For 100mm dia. Pipe
290
-
-
... More
For 75mm dia. Pipe
83
-
-
... More
Providing and fixing PTMT grating of approved quality and colour. 125 mm nominal dia with 25 mm waste hole
100
-
-
... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) alround 100mm dia. SW / CI / waste pipes including bed concrete as per standard design
175
-
-
... More
Providing, fixing, testing and commissioning of UPVC rain water pipes (IS : 4985-1983 class-III ) including injection moulded fittings (heavy duty) (plain or door) e.g. bends, junction, cowls, tees, offsets, access pieces etc. Clamps/Supports jointing with rubber ring/solvent cement joints including cutting chase or holes in walls and floors and making good as required at Site [For Balcony Drain + Terrace Rain Water Downtake Pipe]. 160 OD
500
-
-
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
20
-
-
... More
WATER SUPPLY INSTALLATIONS
-
-
-
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
99
-
-
... More
Providing and fixing G.I. pipes complete with GI fittings and clamps including cutting and making good the walls etc. (Exposed on wall Terrace)
-
-
-
... More
15 mm dia, nominal bore
1
-
-
... More
20 mm dia, nominal bore
165
-
-
... More
25 mm dia, nominal bore
155
-
-
... More
32 mm dia, nominal bore
320
-
-
... More
40 mm dia, nominal bore
220
-
-
... More
50 mm dia, nominal bore
350
-
-
... More
65 mm dia, nominal bore
369
-
-
... More
80 mm dia, nominal bore
193
-
-
... More
Making connection of GI distribution branch with GI main of 50-80mm nominal bore by providing and fixing tee, including cutting and threading the pipe etc. complete.
-
-
-
... More
25 to 40 mm nominal bore
19
-
-
... More
50 to 80 mm nominal bore
15
-
-
... More
Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends)
-
-
-
... More
20mm nominal bore
105
-
-
... More
25 mm dia, nominal bore
84
-
-
... More
32 mm dia, nominal bore
23
-
-
... More
40 mm dia, nominal bore
18
-
-
... More
50mm nominal bore
3
-
-
... More
65mm nominal bore
8
-
-
... More
Painting GI pipes and fittings with two coats of anti corrosive bitumastic paint of approved quality
-
-
-
... More
15 mm dia, nominal bore
1
-
-
... More
20 mm dia, nominal bore
165
-
-
... More
25 mm dia, nominal bore
155
-
-
... More
32 mm dia, nominal bore
320
-
-
... More
40 mm dia, nominal bore
220
-
-
... More
50 mm dia, nominal bore
350
-
-
... More
65 mm dia, nominal bore
369
-
-
... More
80 mm dia, nominal bore
193
-
-
... More
Providing and fixing G.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete.
-
-
-
... More
20mm nominal bore
1
-
-
... More
25mm nominal bore
1
-
-
... More
32mm nominal bore
1
-
-
... More
40mm nominal bore
1
-
-
... More
50mm nominal bore
7
-
-
... More
65mm nominal bore
6
-
-
... More
80mm nominal bore
10
-
-
... More
Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931 15mm nominal bore
1
-
-
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm dia nominal bore
1
-
-
... More
Provide and fixing PTMT ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with L.P/H.P.H.D. plastic ball 50 mm dia NB, 242mm long. Weighing not less than 1240 gms.
1
-
-
... More
Providing and fixing chlorinated poly vinyl chloride (CPVC) pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fitting, including fixing the pipewith clampsat 1 m spacing. This includesjointing of pipes &fittingwith one step CPVC solvent cement and cost ofcutting chases and making good the same including testing ofjoints complete as per direction of Engineer in Charge.(Concealed work including cutting chases and making good the walls etc.)
-
-
-
... More
15mm nominal outer dia. Pipes.
2310
-
-
... More
20mm nominal outer dia. Pipes.
1540
-
-
... More
25mm nominal outer dia. Pipes.
1210
-
-
... More
32mm nominal outer dia. Pipes.
743
-
-
... More
Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) : 50mm diameter
1
-
-
... More
Providing and fixing Bronze compact(Screwed) Diaphram type pressure reducing valve (PRV) with strainer deliverying desired rate of flow. The complete system is tested to a pressure not less than 16 Kg / Sq.cm and suitable to reduce the pressure upto 1 Kg/Sq.cm) including flanges / unions, nuts, bolts and washers complete as required.
-
-
-
... More
15 mm dia
1
-
-
... More
20 mm dia
3
-
-
... More
25 mm dia
3
-
-
... More
32 mm dia
1
-
-
... More
40 mm dia
2
-
-
... More
50 mm dia
6
-
-
... More
Butterfly valve (manual) with C.I body SS disc nitrile sheet & O ring & PN 16 Pressure rating as specified 100 mm nominal bore
-
-
-
... More
50 mm dia.
3
-
-
... More
65 mm dia.
9
-
-
... More
80 mm dia.
2
-
-
... More
100 mm dia.
1
-
-
... More
Providing, laying, Jointing, Testing and commissioning of uPVC pressure pipes of 10Kg/Sqcm pressure rating class 5 (IS : 4985-2000) including fittings, tees, bends, clamps, coupling and adaptors supports, and jointing with solvent joint, testing and necessary earth work in excavation, backfilling, disposal of surplus earth with a lead upto 50m complete, compaction and consolidation Including laying cement concrete 1:2:4 alround UPVC pipe including bed concrete and thrust blocks at bends as per standard design.
-
-
-
... More
25 OD mm.
33
-
-
... More
32 OD mm.
22
-
-
... More
40 OD mm
18
-
-
... More
50 OD mm
26
-
-
... More
63 OD mm
22
-
-
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
3
-
-
... More
Constructing masonry Chamber 60x45x50 cm,inside with 75 class designation brick work in cement mortar 1:5 (1 cement:5 fine sand) for water meter complete with C.I. Doble flap surface box 400x200x200mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 corase sand: 4 graded stonr aggregate 20mm nominal size) necessary excavation foundation concret 1:5:10 (1 cement:5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortor 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design. With F.P.S. bricks
10
-
-
... More
Providing and fixing M.S fabricated hot dipped galvanized coating puddle flange comprising of 600 mm dia long M.S class 'B' pipe (screwed end up to 50 mm & flange for more than 50 mm dia) with 6 mm thick M.S plates of required size including cutting holes in centre of plate, inserting pipe & making welded (Arc) joint complete. Same shall be installed with TEC welded joint in position with reinforcement bars of RCC tank wall/slab including making cutout in shuttering during concrete casting of tank of following diameter. (Under Ground Overhead Tanks.)
-
-
-
... More
25mm dia pipe, 600mm long with size of 250x250x6 mm MS plate
1
-
-
... More
32mm dia pipe, 600mm long with size of 250x250x6 mm MS plate
1
-
-
... More
40mm dia pipe, 600mm long with size of 300x300x6 mm MS plate
1
-
-
... More
50mm dia pipe, 600mm long with size of 300x300x6 mm MS plate
1
-
-
... More
65mm dia pipe, 600mm long with size of 350x350x6 mm MS plate
1
-
-
... More
80mm dia pipe, 600mm long with size of 400x400x6 mm MS plate
1
-
-
... More
Providing, Fixing, Testing & Commissioning of nitrle rubber insulation on hot water supply pipes. K-Flex, A-Flex, Armacell. The rate include cost of all material & labour involved in the item complete and all as per direction of engineer incharge.
-
-
-
... More
15mm (9 mm thickness)
231
-
-
... More
20mm (9 mm thickness)
121
-
-
... More
25mm dia (9 mm thickness)
55
-
-
... More
32mm dia (13 mm thickness)
39
-
-
... More
40mm dia (13 mm thickness)
21
-
-
... More
50mm dia (13 mm thickness)
6
-
-
... More
65mm dia (19 mm thickness)
5
-
-
... More
80mm dia (19 mm thickness)
2
-
-
... More
100mm dia (19 mm thickness)
2
-
-
... More
SUBHEAD-04: SEWERAGE & DRAINAGE INSTALLATIONS UPTO MAIN ROAD FIRST MANHOLE
-
-
-
... More
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete:
-
-
-
... More
150 mm diameter
77
-
-
... More
200 mm diameter
149
-
-
... More
250 mm diameter
99
-
-
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design :
-
-
-
... More
150 mm diameter S.W. pipe / RCC pipe
66
-
-
... More
200 mm diameter S.W. pipe / RCC pipe
35
-
-
... More
250 mm diameter S.W. pipe / RCC pipe
77
-
-
... More
300 mm diameter S.W. pipe / RCC pipe
99
-
-
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :
-
-
-
... More
180 x 150mm size P-type
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
10
-
-
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
-
-
-
... More
150 mm dia. R.C.C. pipe
66
-
-
... More
250 mm dia. R.C.C. pipe
77
-
-
... More
300 mm dia. R.C.C. pipe
99
-
-
... More
450 mm dia. R.C.C. pipe
132
-
-
... More
500 mm dia. R.C.C. pipe
15
-
-
... More
600 mm dia. R.C.C. pipe
10
-
-
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610mm internal dimensiions total weight of cover and frame to be not less than 38 Kg. ( weight of cover 23 Kg. and weight of frame 15 Kg.), with FPS bricks with class designation 7.5
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
13
-
-
... More
Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
4
-
-
... More
Extra for depth for manholes: Size 90 x 80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
6
-
-
... More
Size 120x90 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
... More
Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :
-
-
-
... More
0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately):
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
9
-
-
... More
Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91 m to 1.67 m With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
3
-
-
... More
Constructing brick masonry circular manhole 1.22m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :
-
-
-
... More
1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) :
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
5
-
-
... More
Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68 m to 2.29 m : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
-
... More
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
15
-
-
... More
V HD - 20 Circular shape 560 mm internal diameter
1
-
-
... More
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :
-
-
-
... More
For pipes 100 to 250 mm diameter
1
-
-
... More
For pipes 350 to 450 mm diameter
1
-
-
... More
Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450mm precast RCC horizontal grating with frame complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
14
-
-
... More
FIRE FIGHTING WORKS
-
-
-
... More
Supply and fixing in position 1 m wide Insulation mat made of elastomeric polymers Material (Class -A) of 415V grade as per IS 15642-2006 . Thickness of insulation mat shall be not less than 2 mm to withstand 1.1 KV dielectric strength AS PER IS 15652 : 2006. It should be complete as per specifications & directions of Engineer-in-charge.
5
-
-
... More
PIPES & ACCESSORIES
-
-
-
... More
Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. ( For Underground )
-
-
-
... More
150 mm. Dia
121
-
-
... More
100 mm. Dia
17
-
-
... More
80 mm. Dia
13
-
-
... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. (Plant Room piping/Vertical Riser/Downcomer/Floor)
-
-
-
... More
25 mm dia
2000
-
-
... More
32 mm dia
101
-
-
... More
40 mm dia
1350
-
-
... More
50 mm dia
850
-
-
... More
65 mm dia
850
-
-
... More
80 mm dia
774
-
-
... More
100 mm dia
682
-
-
... More
150 mm dia
755
-
-
... More
200 mm dia (wall thickness 6.3 mm)
9
-
-
... More
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal
30
-
-
... More
Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal
2
-
-
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
-
-
-
... More
50mm dia
1
-
-
... More
65mm dia
7
-
-
... More
80 mm dia
5
-
-
... More
100 mm dia
2
-
-
... More
150 mm dia
17
-
-
... More
200 mm dia
2
-
-
... More
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.
11
-
-
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :
-
-
-
... More
65 mm dia
2
-
-
... More
80 mm dia
2
-
-
... More
100 mm dia
2
-
-
... More
150 mm dia
1
-
-
... More
200 mm dia
1
-
-
... More
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.
-
-
-
... More
100 mm dia
2
-
-
... More
150 mm dia
2
-
-
... More
200 mm dia
1
-
-
... More
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Gun Metal
30
-
-
... More
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.
-
-
-
... More
20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585
-
-
-
... More
20 mm nominal internal dia gun metal globe valve & nozzle.
-
-
-
... More
Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.
-
-
-
... More
36 m
30
-
-
... More
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : Gun metal
30
-
-
... More
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :
-
-
-
... More
2 way-100 mm dia M.S. Pipe.
1
-
-
... More
4 way - 150 mm dia M.S. Pipe. (FOR UG TANK & EXTERNAL RING MAIN)
2
-
-
... More
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.
2
-
-
... More
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :
-
-
-
... More
Pendent Sprinkler
1950
-
-
... More
Upright Sprinkler
750
-
-
... More
Horizontal side wall sprinkler
40
-
-
... More
Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.
1
-
-
... More
Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required.
-
-
-
... More
100mm dia
2
-
-
... More
150mm dia
9
-
-
... More
Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required : 150mm dia
4
-
-
... More
Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required.
-
-
-
... More
700 mm
350
-
-
... More
1000 mm
150
-
-
... More
Supplying, installation, testing & commissioning of deluge valve (to be used for water curtains) UL listed with wet pilot basic trim assembly for DVA with test and alarm, drip and drain valve with water motor gong complete as required. 80 mm dia
1
-
-
... More
Providing, installation, testing & commissioning of water curtain nozzle 15mm dia nickel chrome plated brass, BSPT, K-factor as per design consideration complete as required.
24
-
-
... More
Providing, installation, testing & commissioning of electric release trim assembly for deluge wall with two way solelnoid valve, weather proof operation on 24 volts DC supply complete as required.
1
-
-
... More
Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia in white finish UL Listed or FM approved complete as required.
1950
-
-
... More
Providing and fixing standard fireman's axe with heavy insulated rubber handle conforming to IS: 926 complete.
30
-
-
... More
Providing & Fixing of MS door made up of 16 gauge MS Sheet capable of accommodating fire hose reel, landing valve, hose pipes, fittings, 1 No. CO2 & 1 No. Dry podwer type portable fire extinguishers & accessories. The door shall have a front glass with lock and key arrangement & shall be painted with one coat of primer & two coat of finished stove enamelled post office red colour paint & "FIRE HOSE" written on front.
(Approx. size of door: 2100 mm HEIGHT, WIDTH OF DOOR AS PER SHAFT SIZE )
30
-
-
... More
Providing and fixing hose cabinet of size 750mmX600X250mm made of 16 gause thick MS sheet with 4 mm thick float glass doors in front painted "FIRE" in red paint i/c recessary locking arrangement suitable to accommodate external hydrant with butterfly valve 2 nos. 15 mtr. long hose pipe. 1 no. brach pipe mounted on wall or raised brick platform & duly painted with post office red externally and white internally with synthetic enamel paint complete in all respects for external hydrant. as directed by Engineer-in-Charge.
1
-
-
... More
Pressure Vessel
Supplying, installing, testing and commissioning of pressure vessel for pressurization of fire system complete with valves at outlet / drain to operate as per operating sequences including 25 mm dia drain valve, air release valve with stop cock on the top, outside with one coat of primer & two coats of synthetic enamel paint of approved shade complete as required to operate commonly main fire pump, sprinkler pump & jockey pump at drop of pressure, automatically at required pressure setting. Complete as per manufacturer's specifications & as directed by Engineer- in-charge.
working pressure:- 11 kg/sqcm
test pressure: 20 kg/sqcm
-
-
-
... More
(450 mm dia & 2000 mm height)
1
-
-
... More
Providing, Fixing, testing and commissioning of resilient rubber lined single arch vibration eliminators suitable for raw water up to 45 deg. C temperature, working pressure 11 Kg/cm2 and test pressure 16 Kg/cm2 to provide relief from stresses at pipe flanges.
-
-
-
... More
150 mm dia
1
-
-
... More
80 mm dia
1
-
-
... More
Supply, fixing, testing and commissioning of screwed type brass/bronze lever operated ball valve of full flow with stainless steel ball (AISI 304 & spindle AISI 410) with setting & gland of superior quality having minimum working pressure of 16 kg/sqcm. 25 mm Dia
1
-
-
... More
Providing and fixing 25 mm dia inspection & testing assembly with gun metal ball valve, gun metal sight glass ,Reducer ,union, G.I PIPE. connection to drain pipe/riser.
16
-
-
... More
Providing & fixing cast iron 100 mm dia. Foot valve with nuts, bolts, 1.5 mm thick CAF gasket complete with all accessories (To be provided into UG Fire Water Tanks).
1
-
-
... More
Supply and fixing of 4 Nos G.I round bottom FIRE BUCKET of 9 LTR. Capacity field with sand including proper supporting /mounting arrangement MS Angle Iron Frame painted by fire red colour over 2 coats of red oxide paint and written with white paint FIRE complete in all respects as per direction of Engineer Incharge .
1
-
-
... More
Providing, fixing water flow meter on test line complete with all accessories for flow indication , monitoring & testing of fire pumps with bypass arrangment including piping & bypass valves. 150 mm dia
1
-
-
... More
FIRE EXTINGUSHER
-
-
-
... More
Providing and fixing of 4.5 Kg. carbon-di-oxide type fire extinguishers consisting of welded M.S. cylinderical body, squeeze lever discharge valve fitted with pressure indicating guase ingernal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming ro IS:15683 finished externally with re enamel paint and fixed to wall with brackets complete with internal charge.
34
-
-
... More
Providing and fixing 6.0 Kg. ABC Powder type fire extinguishers consisting of welded M.S. cylinderical body, squeeze lever discharge valve fitted with pressure indicating guase internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to IS:15683 finished externally with re enamel paint and fixed to wall with brackets complete with inernal charge.
80
-
-
... More
Providing and fixing 9.0 Kg. ABC Powder type fire extinguishers consisting of welded M.S. cylinderical body, squeeze lever discharge valve fitted with pressure indicating guase internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to IS:15683 finished externally with re enamel paint and fixed to wall with brackets complete with inernal charge.
80
-
-
... More
Providing, fixing, testing and commissioning of 50 Litres (trolley mounted) Mechanical Foam type Fire Extinguisher. In HP Mild Steel Cylinders ISI marked TAC approved fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged complete in all respects including wall suspension bracket / trolley mounted and confoming to IS:13386 .
1
-
-
... More
Providing, fixing, testing and commissioning of CO2 type Fire Extinguisher of capacity 22.5 kg filled with Co2 Gas as per IS 15222 with controll discharge mechanism fitted with Hose, Horn & TROLLEY confirms to IS 2878 bearing ISI mark. Co2 Cylinder as per IS 7285.
1
-
-
... More
Providing and fixing 2 kg capacity clean agent-HFC 236FA Stored Pressure type fire extinguisher ISI marked under IS:15683 complete with imported Novec 1230 manufactured by 3M, with Zero Ozone Depeltion Potential and Very Low Global Warming Potential of 1 with 20 Years Blue Sky Warantee against any regulatory Bans and Restrictions.
26
-
-
... More
Providing and fixing Fire related signages printed on photoluminescent U1000 aluminium sheet of 1.0 mm (+-10%) containing Lumigen II as base chemical, covered under UV stablized coating and of appropriate size including fixing on wall, door, ceiling etc. with proper clamps, hangers, cleats, anchor fasteners etc.
1650
-
-
... More
Add GST 18 %
18
-
-
... More
Add Labour cess 1%
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements