State Building Construction Corporation Limited Tender
... More
Search from across the categories, cities, and authorities to find the latest Jharkhand tenders. Every Jharkhand tender is curated from credible sources of government websites (eProcurement Jharkhand portal) and newspapers, thus ensuring the credibility of the information presented to you. For more information on Jharkhand tender bidder registration, the login process and more read the FAQs section on this page.
Costs
EMD
₹ 3,99,600Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_JSBCC_61062_1Bid Award Id
ViewTender No
JSBCCL/44 /2022-23Tender Authority
State Building Construction Corporation Limited ViewPurchaser Address
-Website
http://jharkhandtenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Providing coarse clean local SAND IN FILLING in foundation trenches or in plinth including ramming and watering in layer not exceeding 150 mm thick with all leads and 1.5 M lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of Engineer In charge (Mode of measurement compacted volume)
23.93
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up tp plinth level 1:4:8 (1 cement :4 coarse sand (Zone -III) :8 graded stone aggregate 40 mm nominal size)
93.17
-
-
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor,etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1½:3 (1 cement:1½ coarse sand:3 graded stone aggregate 20 mm nominal size)
0.28
-
-
... More
R C C WORK
-
-
-
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.
(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately).
-
-
-
... More
All works uptp plinth level
196.91
-
-
... More
All works above plinth level upto floor V level
441.15
-
-
... More
Providing Tor steel reinforcement of 8mm. dia rods as per approved design and drawing -do- -do- TMT Fe 500 (Only valid for sAlL & TATA Steel
17.87
-
-
... More
Providing Tor steel reinforcement of 10mm. Dia. bars as per approved design and drawing -do- -do-
13.4
-
-
... More
Providing Tor steel reinforcement of 12mm. Dia. bars as per approved design and drawing -do- -do-
13.4
-
-
... More
Providing Tor steel reinforcement of 16mm. Dia. bars as per approved design and drawing -do- -do-
17.87
-
-
... More
Providing Tor steel,reinforcement of 20mm, 25mm, 8mm, 32mm dia bars as per approved design and drawing -do- -do- 20125 mm dia TMT bar Fe 500 (Only valid for SAIL & TATA Steel) JSPL, and Vizag Steel)
26.8
-
-
... More
Centering and shutteing including struting, propping etc and removal of form for
-
-
-
... More
Foundations, footings, bases for columns, etc for mass concrete
473.2
-
-
... More
Walls ( any thickness) including attached pilasters, butteresses, plinth and string course etc
63.78
-
-
... More
Suspended floors, roof , landings , balconies and access platform
1318.51
-
-
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers
1318.8
-
-
... More
Columns, Pillars, Piers, abutments, Posts and struts
542.4
-
-
... More
Stairs, ( excluding landings ) expept sprial staircase
27
-
-
... More
Vertical and horizontal fins individuaaly or forming box louvers band, facies and eaves boards
46.69
-
-
... More
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured). uspended floors, roofs, landing, beams and balconies
(Plan area to be measured) All floors slabs:( floor to floor Ht 3.6 m)
1318.51
-
-
... More
BRICK WORK
-
-
-
... More
providing designation 75 B brickwork in C M ('1 :6 ) in foundation and Plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing. taxes and royalty all complete as per building specification and direction of E/l.
15.36
-
-
... More
Providing Designation 100A B/W with Fly Ash Lime Brick (FALB) conforming to IS 12894-1990 (9"x4.5"x3") in cement mortar (1:6) in Superstructure with clean coarse sand of F.M. 2 to 2.5 including 10mm thick mortar joints,cost of screening, raking out joints to 15 mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.
202.51
-
-
... More
Providing designation 112 mm thick reinforced designation 100 A brick work vuith fly ash lirne brick (FLAG)confirming to lS 12894-1990 (9"x4'5"x3" ) in C.M. ( 1 . 4 ) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, carriage of materials,
scaffolding, raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specificationand direction of E/|.
219.89
-
-
... More
Extra for providing & placing in position 2 no 6mm dia ms bar every 3rd corse of half brick masonary
219.89
-
-
... More
Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l.
700
-
-
... More
WOOD WORK
-
-
-
... More
Supplying fitting and fixing 35mm thick solid core type decorative single leaf flush door shutter with both side decorative veneered with black board core bended with high quality phenol formal clehydes synihetic resin of standard make with Aluminium fittings :such as hinges, tower bolts, hendle, cleats and sand blocks and laxes all conrplete as pe building specrfication and direction of E/l.
24.75
-
-
... More
Supplying fitting and fixing 35mm thick soltd core type decorative double leaf flush door sltutter with both side decorative veneered with black board core bended with high quality phenol formal clehydes synihetic resin of standard make with Aluminium fittings :such as hinges, tower bolts, hendle, cleats and sand blocks and laxes all conrplete as pe building specrfication and direction of E/l.
10.8
-
-
... More
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete :
56.45
-
-
... More
Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of
approved quality with necessary screws etc. complete.
11
-
-
... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
12
-
-
... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
12
-
-
... More
STEEL WORK
-
-
-
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works Weight @ 12 kg/sqm
400.9
-
-
... More
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness,including hinges, jamb, lock jamb, bead and if required angle threshold
of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:
-
-
-
... More
Fixing with carbon steel galvanised dash fastener
of required dia and size (to be paid for separately
53.4
-
-
... More
Supplying,frtting and fixing M.S. grill made of 20x6cmm M.S. flat as per approved design and drawing, properly fabrlcated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/1 Wt @ 15Kg / sqm
2436.75
-
-
... More
Supplying fitting and fixing glass panes including supplying putty, beads and nails after taking out old and broken glass panes and disposal of debris all complete as per building specification and direction of E/1.
162.45
-
-
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength
conforming to IS: 4454 - part 1 and M.S. top cover of required thickness
for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover
27
-
-
... More
Providing and fixing ball bearing for rolling shutters.
12
-
-
... More
Extra for providing mechanical device chain and crank operation for operating rolling shutters. Exceeding 10.00 sqm and upto 16.80 sqm in the area
27
-
-
... More
Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer-in- charge, (area of grill to be measured).
10.8
-
-
... More
FLOORING WORK
-
-
-
... More
providing and laying, Doublecharge vitrified floor tiles in different sizes (thickness to be specified by lhe manufacturer) with water absorption less than 0.08% and conforming to lS 15622/ISO 13009 of approved make in all cotours and shades, laid on 20mm thick cement mortar 1 4 (1 cement:4 coarse sand) jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of tile 600x600 mm
102.96
-
-
... More
Providing and fixing granite 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for flooring, kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
4.86
-
-
... More
Providing edge moulding to 18 mm thick marble/granite stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
8.1
-
-
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
10
-
-
... More
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.Granite Stone of approved shade
0.38
-
-
... More
FLOORING
-
-
-
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.
14.54
-
-
... More
Providing and laying 1st quality Ceramic glazed wall tiles thickness to be specified by the manufacturer) in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing polishing and cost of curing, taxes and royalty all complete as per building specification and direction of E/I.
43.55
-
-
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
38.7
-
-
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
14.85
-
-
... More
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
968
-
-
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as
directed by the Engineer-in-Charge
-
-
-
... More
Polished Granite stone slab colour of Black, Cherry/Ruby
Red or equivalent
10.8
-
-
... More
Tremix Flooring Work
-
-
-
... More
Extra for vaccum dewatering the concrete floors using TREMIX or equivalent over P.C.C layer i/c finishing the top surface to required level/ slope and grade with ugh / polish finish using power trowels (both fan & disc) of standard make including curing, cutting of groove of grid size 4m x 4m with, mixing of nonmetallic hardening compound (3.0 Kg/Sqm of Fosroc or approved make ) ,cutting of VDF floor with Diamond Saw System (disposal of debris to be included in the quoted rate)as per specification etc. complete as per specification and drawing. (Maximum thickness of RCC flooring shall be of 300 mm) At all heights / depths and levels.
1279.4
-
-
... More
ROOFING & WATER PROOFING WORK
-
-
-
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
120
-
-
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
6
-
-
... More
Roof/Terrace Water proofing:
-
-
-
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
-
-
-
... More
Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
-
-
-
... More
Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing
compound conforming to IS : 2645 and approved by Engineerin- charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
-
-
-
... More
After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and
approved by Engineer-in-charge.
-
-
-
... More
Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
-
-
-
... More
The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
-
-
-
... More
With average thickness of 120 mm and minimum
thickness at khurra as 65 mm.
734.5
-
-
... More
Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)
55.09
-
-
... More
Provrding and filling of Groove between 25 mm PCC Panels with Polyshlphide Sealant (Poring Grade)as per drawings and technical specifications and dii-ection of E in Charge (with 1B% GST).Brand:-Sika- Polysulphide, Fosroc-l-hioflex 600 Dr. Fixit Pidiseal PS(42P),MYK Seal PS or Euivallent
2013.9
-
-
... More
FINISHING WORK
-
-
-
... More
Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I.
1164.42
-
-
... More
Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I.
1381.74
-
-
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete
3625.11
-
-
... More
Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I.
1078.95
-
-
... More
Finishing walls with Acrylic Smooth exterior paint of required shade,New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
1078.95
-
-
... More
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and m anufacture, including applying additional coats wherever required, to achieve even shade and colour.
2546.16
-
-
... More
ALUMINIUM WORK
-
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately): For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) For fixed portion @ 6KG/SQM
931.05
-
-
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) For opnable portion @ 6KG/SQM
931.05
-
-
... More
MISCELLANEOUS WORK
-
-
-
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
110
-
-
... More
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall
be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
100
-
-
... More
Goods Lift ( Capicity 1 Ton) Speed in m/sec.0.5
1
-
-
... More
Providing and Laying epoxy flooring 2mm to 3mm thick acid resistant coating, chemical resistant coating, polyurethane flooring, anti bacteria polyurethane wall coating for sterilizing the environment of hospitals.
652.5
-
-
... More
CARRAIGE OF MATERIALS
-
-
-
... More
SAND (UPTO 36KM LEAD)
406.12
-
-
... More
CHIPS (UPTO 22KM LEAD)
89.42
-
-
... More
BRICKS (UPTO 8KM LEAD)
104.38
-
-
... More
PLUMBING
-
-
-
... More
SANITARY INSTALLATIONS
-
-
-
... More
Supplying, fitting and fixing 40mm high vitreous white glazed earthen E.W.C. with ‘p’ trap of parry hindustan or any other approved I.S.S. make including supplying and fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I.handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450grams 15mm P.V.C. alkathene pipe 45cm. long with brass coupling at both ends and white/black plastic solid state seal and lead of commander/cuckoo or other I.S.S. make with hinges or screws etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide priming, all complete
as per specification and direction of E/I. (ii) E.W.C. with 'S' trap (b) 10 lit. low level PVC Cistem
2
-
-
... More
Supplying fitting and fixing vitreous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S. approved make supported on painted C.I. or R.S. brackets 32mm C.I.brass waste, 15 mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I.
2
-
-
... More
Supplying fitting and fixing white glazed fire’s clay sink of approved make with overflow arrangements supported on C.I. or R.S. painted brackets 40mm. dia C.P.brass waste with C.P.brass chain and rubber plug 40 mm dia P.V.C. waste pipe about 750mm long with brass coupling at one endand 15mm C.I. body brass spindle bib cock of approved quality of weight not less than 450grams. including cutting wall and making good the same etc. all complete as per specification and direction of E/I. (i) Kitchen sink 600 mm x 450 mm x 250 mm
1
-
-
... More
Providing and fixing male ended 15mm dia brass bib cock of
approved quality (Wt. not less than 350gms.) with extra socket all complete as per specification and direction of E/I.
2
-
-
... More
Providing and fixing N.P/C.P. brass /P.V.C. porcelain shower rose of 15mm inlet etc. all complete as per specification and direction of Engineer - in -Charge. (c) 150mm dia P.V.C shower
4
-
-
... More
(b)Mirrors of 6mm thick plate glass bevelled edge mirror including C.P. brass revolving fittings 3mm ply wood board and C.P. hinges to fix with mirror. (i) 600mm x 450mm size
2
-
-
... More
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitionsby cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade
2
-
-
... More
Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms.
5
-
-
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour weighing not less than 105 gms.
2
-
-
... More
Providing & fixing PTMT towel ring trapezoidal shape 215 mm long 200 mm wide with minimum distance of 37 mm from wall face with concealed fittings arrangement of approved quality and colour weighing not less than 88 gms
2
-
-
... More
Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931
2
-
-
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore
2
-
-
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 a) 15 mm nominal bore. 15 mm nominal bore
16
-
-
... More
Providing and fixing toilet paper holder : C.P. Brass
2
-
-
... More
INTERNAL DRAINAGE INSTALLATIONS
-
-
-
... More
Supplying fitting and fixing H.C.I. pipes with ear of approved make confirming to I.S.I. 1729 including supplying nails and bobins short pieces, cutting loose collars,lead and yarn for making lead caulked joints, cutting pipes to size including earth work or scaffolding where necessary etc. all complete as per specification and direction of E/I.
-
-
-
... More
(a) 100 mm dia
40
-
-
... More
(b) 75 mm dia
10
-
-
... More
Supplying and fixing H.C.I. fittings of approved make confirming to I.S.S. 1729 including supplying nails and bobines lead and yarn from making lead caulked joints including earth work or providing scaffolding as the case may be all complete as per specification and direction of E/I.
-
-
-
... More
(A) H.C.I. single junction with door but without ear except socket
-
-
-
... More
(i) 100 mm dia(wt. 10.5 Kg. app.)
4
-
-
... More
(B) H.C.I Heal rest bend
-
-
-
... More
(i) 100 mm dia(wt. 5.5 Kg. app.)
4
-
-
... More
(C) 100 mm dia H.C.I. "P" Trap with
-
-
-
... More
Anti Syphonage Horn (wt. 8.5 kg app.)
2
-
-
... More
(D) H.C.I double junction with doorand ear
-
-
-
... More
(i) 100 mm dia(wt. 15.5 Kg. app.)
2
-
-
... More
(E) H.C.I. double inverted Jn.
-
-
-
... More
(100 mm x 50 mm x 50 mm size)
2
-
-
... More
(F) H. C. I. offsets with ear
-
-
-
... More
(i) 100 mm dia (wt. 6 kg. app.)
2
-
-
... More
(G) H.C.I. Bend with door and ear
-
-
-
... More
(i) 100 mm dia (wt. 6.5 kg. app.)
2
-
-
... More
(H) H.C.I. plain bend with ear
-
-
-
... More
(i) 100 mm dia (wt. 5.5 kg. app.)
2
-
-
... More
(J) Floor trap with grantings
-
-
-
... More
(i) 100 mm dia
4
-
-
... More
(K) Northon patent H.C.I. Cowel
-
-
-
... More
(i) 100 mm dia (wt. 3.25 kg. app.)
2
-
-
... More
(L) H.C.I. pass over
-
-
-
... More
(i) 100 mm dia
2
-
-
... More
Supplying all tools and labours and cutting chajja, Cornice, for laying H.C.I. pipes and making good the same as per specification and direction of E/I.
2
-
-
... More
Cutting drain width wise above G.L. for laying H.C.I. pipe and restoring brick work in cement mortar (1:4) 12mm cement plaster in (1:4) with neat cement punning as per specification and direction of E/I.
1
-
-
... More
Making holes in walls for laying H.C.I. pipes and restoring the same after pipe laying as per specification and direction of E/I.
-
-
-
... More
(i) 125 mm dia
1
-
-
... More
(ii) 250 mm dia
1
-
-
... More
(v) R.C.C. Chajja
1
-
-
... More
Supplying materials and labour for painting the exposed H.C.I. pipes and fittings with 2 coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I.
-
-
-
... More
(c) 100 mm dia
50
-
-
... More
(b) 75 mm dia
10
-
-
... More
Providing and fixing MS holder bat clamps of approved design to cast iron (spun) pipe embedded in and Including cement concrete blocks 10 x10 x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc.
-
-
-
... More
For 100mm dia. Pipe
15
-
-
... More
For 75mm dia. Pipe
2
-
-
... More
100mm inlet and 100mm outlet
-
-
-
... More
Providing and fixing G.I. Pipes complete with G.I. Fittings and clamps. including cutting and making good the walls etc. required for waste connection from W.B. , A.S.P., Sump Rising main etc. Complete.
-
-
-
... More
32 mm nominal bore
10
-
-
... More
40 mm nominal bore
2
-
-
... More
50 mm nominal bore
5
-
-
... More
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved qaulity:
-
-
-
... More
32 mm nominal bore
11
-
-
... More
40 mm nominal bore
10
-
-
... More
50 mm nominal bore
5
-
-
... More
Providing and fixing PTMT grating of approved quality and colour.
-
-
-
... More
125 mm nominal dia with 25 mm waste hole
4
-
-
... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) alround 100mm dia. SW / CI / waste pipes including bed concrete as per standard design
10
-
-
... More
Providing, fixing, testing and commissioning of UPVC SWR pipe type 'B' conforms to IS : 13592-1992 with all fittings such as bends, tees, elbow, 'Y', offset, cleaning pipe door, clamps etc. conforming to IS:14735-1999 and steel structural supports etc. including cutting the floors, walls and making good the same in cement concrete 1:2:4 & cement mortar 1:4. The wall thickness of pipe and technical characteristic conforms to IS : 13592-1992 type 'B'. The fitting dimension conforming to IS : 14735-1999. The jointing to be completed with rubber ring joint/solvent weld joint as required/applicable.
-
-
-
... More
(a) 100 mm dia
50
-
-
... More
(b) 75 mm dia
1
-
-
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
6
-
-
... More
WATER SUPPLY INSTALLATIONS
-
-
-
... More
Providing and fixing CPVC pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mt spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge. Internal work -Exposed on Wall
-
-
-
... More
15 mm nominal outer dia pipes
11
-
-
... More
20 mm nominal outer dia pipes
20
-
-
... More
25 mm nominal outer dia pipes
35
-
-
... More
32 mm nominal outer dia pipes
150
-
-
... More
40 mm nominal outer dia pipes
10
-
-
... More
50 mm nominal outer dia pipes
5
-
-
... More
Providing and fixing in position 25 mm diameter mosquito proof coupling of approved municipal design.
2
-
-
... More
EXTERNAL WORK
-
-
-
... More
Constructing masonry Chamber 60x45x50 cm,inside with 75 class designation brick work in cement mortar 1:5 (1 cement:5 fine sand) for water meter complete with C.I. Doble flap surface box 400x200x200mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 corase sand: 4 graded stonr aggregate 20mm nominal size) necessary excavation foundation concret 1:5:10 (1 cement:5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortor 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design. With F.P.S. bricks
1
-
-
... More
Earth work in excavation for laying of different types and sizes of R.C.C. spun pipes with disposal of excavated earth within initial lead and lift as per specification and direction of E/I. All kinds of soil (ii) For classification of soil item-B
10
-
-
... More
Providing and fixing square mouth SW gully trap grade ‘A’ complete CI grating brick masonry chamber with bricks of class designation 75 and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 13.00 kg and frame to be not less than 5 kg. as per standard design. (COVER MIN. 4.5 KG & FRAME MIN.2.7 KG ) 150x100mm size P type With FPS bricks
2
-
-
... More
Providing and laying non-pressure NP2 class (light duty) RCC pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete.
-
-
-
... More
150 mm dia RCC pipe
125
-
-
... More
250 mm dia RCC pipe
85
-
-
... More
300 mm dia RCC pipe
50
-
-
... More
Providing and laying in position cement concrete of grade excluding the cost of centering and shuttering - all work up to plinth level 1:5:10 (1 cement : 5 coarse sand : 10 graded ston aggregate 40 mm nominal size)
4
-
-
... More
Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
10
-
-
... More
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :
-
-
-
... More
For pipes 100 to 250 mm diameter
1
-
-
... More
Domestic Water lifting pumps :
-
-
-
... More
Flow Rate/Capacity - 30 LPM
-
-
-
... More
Pumping Head - 35 m
-
-
-
... More
1 Set = 2 Nos. pump (1 working+1 standby)
-
-
-
... More
Approx H.P. - 2 HP or as per manufacturer recommendation.
1
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
5000
-
-
... More
FIRE FIGHTING WORKS
-
-
-
... More
FIRE HYDRANT AND PIPING FOR FIRE FIGHTING SYSTEM
-
-
-
... More
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal
6
-
-
... More
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as
required. (INTERNAL FIRE FIGHTING)
-
-
-
... More
20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585
-
-
-
... More
20 mm nominal internal dia gun metal globe valve & nozzle.
-
-
-
... More
Drum and brackets for fixing the equipmets on wall.
-
-
-
... More
Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.
-
-
-
... More
30 m
2
-
-
... More
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636
(type-A) as required : Gun Metal
6
-
-
... More
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as
required : Gun metal
6
-
-
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
-
-
-
... More
100 nominal bore
4
-
-
... More
150 nominal bore
6
-
-
... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
-
-
-
... More
Threaded joint upto 50mm diameter pipe.
-
-
-
... More
Welded joint above 50mm diameter pipe.
-
-
-
... More
25 mm nominal bore (class C)
122
-
-
... More
32 mm nominal bore (class C)
35
-
-
... More
40 mm nominal bore (class C)
18
-
-
... More
50 mm nominal bore (class C)
24
-
-
... More
65 mm nominal bore (class C)
24
-
-
... More
80 mm nominal bore (class C)
15
-
-
... More
100 mm nominal bore (class C)
50
-
-
... More
150 mm nominal bore (class C)
50
-
-
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
-
-
-
... More
50mm dia
3
-
-
... More
65mm dia
3
-
-
... More
80 mm dia
4
-
-
... More
100 mm dia
2
-
-
... More
150 mm dia
3
-
-
... More
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.
1
-
-
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :
-
-
-
... More
65 mm dia
2
-
-
... More
80 mm dia
2
-
-
... More
100 mm dia
2
-
-
... More
150 mm dia
3
-
-
... More
Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 80 mm
15
-
-
... More
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :
-
-
-
... More
2 way-100 mm dia M.S. Pipe.
1
-
-
... More
4 way - 150 mm dia M.S. Pipe.
1
-
-
... More
SPRINKLER SYSTEM
-
-
-
... More
Providing and fixing testing and commissioning of 15 mm size quartzoid bulb type sprinklers. Set to operate at
-
-
-
... More
Providing, fixing, testing & commissioning of 15mm diaquartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :
-
-
-
... More
Pendent Sprinkler
105
-
-
... More
side wall sprinkler
24
-
-
... More
Providing and fixing flow switch in following sizes M.S pipe including connection etc as required.
-
-
-
... More
100mm dia
2
-
-
... More
150mm dia
1
-
-
... More
FIRE EXTINGUSHER
-
-
-
... More
Providing, storing, handling, shifting, installation, testing and commissioning of portable fire Extinguishers as described below:
-
-
-
... More
4.5 kg carbon dioxide extinguisher, IS marked, with high pressure discharge tube, horn, control valve, CCE approved cylinder
5
-
-
... More
6 kg Mono Ammonium Phosphate (ABC) type cartridge operated extinguishers
5
-
-
... More
FIRE PUMPS
-
-
-
... More
Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)
-
-
-
... More
(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520
-
-
-
... More
b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325.
-
-
-
... More
(c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.
-
-
-
... More
(d) Suitable cement concrete foundation duly plastered and with anti vibration pads.
-
-
-
... More
450 lpm at 35 m Head
1
-
-
... More
ELECTRICAL WORK
-
-
-
... More
Wiring for light point/ fan point / exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular switch, modular plate, suitable GI box etc as required. Group C
205
-
-
... More
Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, 2 way modular switch, modular plate, suitable GI box etc as required.
6
-
-
... More
Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.
420
-
-
... More
Wiring for light/ power plug with 4X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit alongwith 2 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.
100
-
-
... More
Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required
-
-
-
... More
CIRCUIT / SUBMAIN WIRING
-
-
-
... More
2x1.5 sq mm + 1x1.5 sq mm earth wire
660
-
-
... More
2x2.5 sq mm + 1x2.5 sq mm earth wire
250
-
-
... More
2x6 sq mm + 1x6 sq mm earth wire.
20
-
-
... More
4x2.5 sq mm + 2x2.5 sq mm earth wire
100
-
-
... More
4x6 sq mm + 2x6 sq mm earth wire.
25
-
-
... More
4x10 sq mm + 2x6 sq mm earth wire.
60
-
-
... More
4x16 sq mm + 2x6 sq mm earth wire.
60
-
-
... More
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
100
-
-
... More
Supplying and fixing of following sizes of PVC conduit along with the accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
20mm dia
200
-
-
... More
25mm dia
600
-
-
... More
32mm dia
100
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
... More
5/6 amps one way switch
30
-
-
... More
15/16 amp one way switch
25
-
-
... More
5/6 amp 3 pin socket outlet
30
-
-
... More
5/16 amp 6 pin socket outlet
25
-
-
... More
TV anteena Socket Outlet
1
-
-
... More
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
8
-
-
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
10
-
-
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.
-
-
-
... More
1 or 2 Module (78mm x 78mm x 45mm) - For Telephone & TV outlet.
1
-
-
... More
4/5 Module (78mm x140mm x 50mm)
55
-
-
... More
6 Module (78mmX205mmx50mm)
5
-
-
... More
Supplying and fixing 2 pin 5 Amp Ceiling rose on the existing junction box/ wooden block including connection etc as required.
8
-
-
... More
Supplying and fixing brass batten/ angle holder including connection etc. as required.
2
-
-
... More
Supplying and fixing Ding dong sound call bell single phase, 230 volts, complete as required.
1
-
-
... More
Installation, testing and commissioning of pre wired fluorescent fitting / Compact fluorescent fitting off all type complete with all accessories and tube etc directly / wall including connection with 1.5 sq.mm FR PVC insulatted. copper conductor single core cable and earthing etc. as required.
211
-
-
... More
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable, etc. as required.
8
-
-
... More
Installation of exhaust fan up 450 mm sweep in the existing opening including making the hole to suit the size of above the fan, making good the damage, connection, testing, commissioning etc. as required.
16
-
-
... More
Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
2
-
-
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 Way Double Door
1
-
-
... More
Supplying and fixing following ways, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 Way (4+24), Double Door Horizontal Type
2
-
-
... More
Supplying and fixing 6 Amp to 32 Amp rating 240 volts, 10 KA "C" Curve Miniature Circuit Breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc.,as required.
-
-
-
... More
6 / 32 Amp Single Pole
44
-
-
... More
40 Amp DP
1
-
-
... More
40 Amp TPN
2
-
-
... More
Supplying and fixing Single pole blanking plate in the existing MCB DB complete etc. as required.
10
-
-
... More
Supplying and fixing of following rating double pole ( Single pole & neutral), 240 volts, resudual current circuit breaker (RCCB), having a sensivity current 30 miliampere in the existing MCB DB complete with connections, testing & commissioning etc as required. 40 Amps
7
-
-
... More
Providing and fixing M.V. danger Notice plate of 200mm x 150 mm of made of mild steel, at least 2 mm thick and vitreous enamelded white on both side and with inscription in single red colour in front side as requird
1
-
-
... More
Providing and fixing H.T. danger Notice plate of 250mm x 200 mm of made of mild steel, at least 2 mm thick and vitreous enamelded white on both side and with inscription in single red colour in front side as requird
1
-
-
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) as required.
12
-
-
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) as required.
2
-
-
... More
Providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required.
40
-
-
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required
120
-
-
... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
50
-
-
... More
Providing and fixing of lighting conductor finial made of 25 mm dia 300 mm long, GI tube having single prong at top with 85 mm dia 6mm thick G.I Base plate including hole etc. as required
4
-
-
... More
Providing and fixing GI Tape 20mmx 3mm thick on parapet or surface of wall for lighting conductor complete as required. ( for Horizental Run)
180
-
-
... More
Providing and fixing GI Tape 20mmx 3mm thick on parapet or surface of wall for lighting conductor complete as required. ( for Vertical Run)
60
-
-
... More
Providing and fixing testing Jointing made of 20mmx 3mm thick G.I Strip 125 mm Long. With 4 nos of G.I bolts. Nuts chuck nuts and spring washers etc. as required
6
-
-
... More
Providing and Laying G.I tape 32mm x 6mm from earth electrode directoly in ground as required.
60
-
-
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.
-
-
-
... More
120 mm dia (OD-120 mm & ID-103 mm nominal)
20
-
-
... More
200 mm dia (OD-200 mm & ID-175 mm nominal)
20
-
-
... More
INSPECTION CHAMBER:
-
-
-
... More
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :
-
-
-
... More
Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets.
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
4
-
-
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.
-
-
-
... More
1 run of cable
250
-
-
... More
2 run of cable
50
-
-
... More
3 run of cable
50
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
-
-
-
... More
Upto 35 sq. mm
250
-
-
... More
Above 35 sq. mm and upto 95 sq. mm
10
-
-
... More
Above 35 sq. mm and upto 95 sq. mm
10
-
-
... More
Above 185 sq. mm and upto 400 sq. mm
10
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.
-
-
-
... More
Upto 35 sq. mm
10
-
-
... More
Above 35 sq. mm and upto 95 sq. mm
10
-
-
... More
Above 95 sq. mm and upto 185 sq. mm
100
-
-
... More
Above 185 sq. mm and upto 400 sq. mm
10
-
-
... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.
-
-
-
... More
Upto 35 sq. mm (clamped with cable tie)
270
-
-
... More
Above 35 sq. mm and upto 95 sq. mm (clamped with cable tie)
10
-
-
... More
Above 95 sq. mm and upto 185 sq. mm (clamped with cable tie)
10
-
-
... More
Above 185 sq. mm and upto 400 sq. mm (clamped with cable tie)
10
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
... More
2 x 6 sq. mm (19mm)
16
-
-
... More
3½ X 185 sq. mm (57mm)
8
-
-
... More
4 X 10 sq. mm (25mm)
6
-
-
... More
4 X 16 sq. mm (28mm)
12
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.150 mm wide x 50 mm depth x 1.6 mm thickness.
20
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.150 mm wide x 50 mm depth x 1.6 mm thickness.
2
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.150 mm wide x 50 mm depth x 1.6 mm thickness.
2
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “Reducer” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.150 mm wide x 50 mm depth x 1.6 mm thickness.
2
-
-
... More
11 KV END TERMINATION:
-
-
-
... More
supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 3C x 240 Sqmm, 11KV XLPE
2
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 120 sq. mm and upto 400 sq. mm
50
-
-
... More
FIRE ALARM SYSTEM (ADDRESSABLE TYPE) AND PA SYSTEM
-
-
-
... More
Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications.
-
-
-
... More
Two Loop Panel.
1
-
-
... More
Supplying, installation, testing & commissioning of central graphical fire alarm management system to centrally monitor and operate the fire alarm system complete as required.
1
-
-
... More
Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector acclimate type sensetive level (0.524%) OVS/ft. complete with mounting base complete as required.
27
-
-
... More
Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required.
1
-
-
... More
Supplying, installation, testing & commissioning of addressable manual call point complete as required.
3
-
-
... More
Supplying, installation, testing & commissioning of addressable fire control module complete as required.
2
-
-
... More
Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required. (75 DBA @3 mtr. & 75CD flashing)
3
-
-
... More
Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required.
4
-
-
... More
Supplying, installation, testing & commissioning of fault isolator complete with base as required.
2
-
-
... More
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
450
-
-
... More
Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required.
1
-
-
... More
Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required.
1
-
-
... More
Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required.
6
-
-
... More
Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms operating at 240 Volt AC Supply complete as required.
1
-
-
... More
Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. Speaker cable Single pair, 2-core, 1.5 sqmm
100
-
-
... More
SUBSTATION WORK
-
-
-
... More
TRANSFORMER
-
-
-
... More
TRANSFORMER Design, manufacture, supply, installation, testing and commissioning of 160 KVA, 11 KV /0.415 KV, 3 phase, 4.5 % impedance, 50 Hz delta/star-11 connected, outdoor type, copper wound transformer, oil immersed ONAN cooled, complete with all fittings such as oil conservator, silica gel breather, thermometer, explosion vent with off Load Tap changing arrangement on HV side with Tapping for variations of high voltage from (+) 5% to (-) 10% in steps of 2.5% each, bi-directional roller, diagrams & rating plate, Oil temperature indicator, & Winding temperature indicator, weather proof Marshalling Box, lifting lugs, first filling of oil, weather proof H.T/L.T cable box etc. complete as per specification. All relays, contacts & CT terminals to be wired upto marshalling box. The Transformer losses should confirm to IS - 1180 Part-1 (2014) with energy efficiency level 2 [0.67 KW at 50% load & 1.95 KW at 100% load shall not exceeds by 5.0% (@ 11 KV) of the maximum total loss values.
a) 160KVA
1
-
-
... More
DIESEL GENERATING SET
-
-
-
... More
Supply, Installation, testing and Commissioning of Silent type Diesel Generating Set at 0.8 PF, 415 Volts, 50 cycles per second, 1500 rpm, 3 phase, suitable for parallel operation / PLC based synchronization, 0.85 load factor including circuit breaker for isolation, sound proof acoustic and weather proof enclosure, residential type silencer (as per CPCB norms-2) fabricated out of CRCA sheet of 14 / 16 SWG thickness with 9 tank pretreated before powder coating with ventillation system complete in all respects comprising of the following.
-
-
-
... More
Diesel Engine -
-
-
-
... More
Diesel Engine suitable for driving alternator of above rating, compression ignition, 4 stroke cycle, Radiator cooled, turbo charged, battery starting, 1500 RPM, suitable for above output of alternator at 40oC, 50% RH & at 210 M MSL and confirming to BS 5514, BS 649, IS 10000, capable of taking 10% overloading for one hour after 12 hrs of prime continuous loading, complete with all the accessories i.e. tachometer with hour meter, flexible coupling with guard, crank case of steel, crank shaft, conncting rods, electronic governing system, dynamically balanced flywheel, air intake manifold, Air cleaner, anti vibration pads, starter motor, including all other accessories required to complete the system.
-
-
-
... More
Instrument Panel - Engine mounted Instrument Panel fitted with and having digital display for followings :
-
-
-
... More
Start stop switch with key
-
-
-
... More
Water temperature indication
-
-
-
... More
Lubrication oil pressure indication.
-
-
-
... More
Lubrication oil temperature indication.
-
-
-
... More
Battery charging indication
-
-
-
... More
RPM indication
-
-
-
... More
Over speed indication
-
-
-
... More
Low Lube oil trip indication
-
-
-
... More
Engine hours indication
-
-
-
... More
Alternator -
-
-
-
... More
Synchronous Alternator of above capacity at 0.8 PF, 3 phase, 415 volts, 50 cycles, 4 wire, 1500 RPM, suitable for operation at 40 deg C, 50% RH & at 210 meter above MSL, capable of taking 10% overlioading for one hour after 12 hrs of prime continuous loading, brushless, self excited, self regulated through AVR, continuous duty confirming to IS 4722, BS 2613 suitable for tropical conditions, class H insulation, including terminal box suitable for cable termination as required.
-
-
-
... More
Base Frame - Both the engine and alternator shall be mounted on suitable base frame made of MS channel which shall be installed on cement concrete foundation and vibration isolating arrangement as per recommendations of manufacturer.
-
-
-
... More
Inbuilt Fuel tank of standard capacity complete with inlet and outlet connections, oil indication gauge, drain plug, air breather, fuel transfer system for automatic fuel refilling system with pump, piping, valves, level indicators etc. complete.
-
-
-
... More
Daily service Fuel tank of 990 liters capacity fabricated out of 2 mm thick MS sheet complete with inlet and outlet connections, oil indication gauge, drain plug, air breather, provision for fuel transfer system, level indicators and all standard accessories etc. as required.
-
-
-
... More
Exhaust Silencer - Exhaust manifold with residential silencer.
-
-
-
... More
The D G set should be supplied with required hardware for external PLC based auto synchronization, auto load sharing, auto load management system.
-
-
-
... More
Starting system - 24 Volt DC starting system comprising of starter motors : voltage regulator and arrangement for initial excitation complete with 24 Volts suitable nos. lead acid type batteries of suitable AH.
-
-
-
... More
Ventillation System - Arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air into the atmosphere as per standard specifications.
-
-
-
... More
160 KVA
1
-
-
... More
Supply, Fixing, testing and Commissioning of Exhaust gas piping system of Class `B' MS pipe as per IS:1239 for upto 150 mm dia and for 200 mm dia & above MS pipe as per IS:3589 with welded joints, cut to required lengths with necessary bends, fittings, flanges, painting over primer coat, with rock wool insulation of minimum 75 mm thick of 150 Kg per cu M density on all sides of exhaust pipe, with chicken mesh wrapping and 26 SWG aluminium sheet cladding complete as required. The aluminum foil should be tightly cladded to insulation surface of pipe. The aluminum cladding shall be locked with sheet metal screws with other sections of aluminium foil. The measurement shall be done on the basis of centre line. (Stack height should be in accordance with emission regulations of CPCB, which will go well above the top most terrace) The exhaust piping system should be suitable for upto 550oC temperature, the surface temperature of exhaust pipe shall not exceed more than 60oC. (The rates are exclusive of support structure)
-
-
-
... More
(Note - Final size of exhaust pipe will be confirmed by the DG vendor after calculating the actual back pressure and submit the same to client / consultant for approval)100 mm dia (wall thickness - 4.5 mm)
10
-
-
... More
Supply & fixing of SS Bellow of following diameter 100 mm dia
1
-
-
... More
Supply & fabrication of D G exhaust pipe supports by M.S angle iron of size not less than 100 x 50 mm x 6/8 mm duly grouted in the wall through minimum 8 mm thick plate and with suitable MS angle / channel iron structure. The entire MS support structure should be painted by 2 coats of anti corrosive paint over primer coat of approved shade and make. The design of support to be duly approved by the Structural Consultant / Architect before fabrication and installation.
1000
-
-
... More
ELECTRICAL PANELS
-
-
-
... More
MAIN L.T. PANEL
-
-
-
... More
Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of 14 SWG CRCA sheet steel fabricated cubical type Main L.T. Panel with AMF, floor mounting, dust & vermin proof, front operated construction, enclosure class - IP 52, powder coated after proper treatment with 9 tank process with top/bottom removable gland plates, as required, double compression type cable glands, earth bus, hinged and lockable doors to achieve dust and vermin proof complete with all inter connections small wiring by min. 2.5 sq. mm. FRLS copper wires, ckt labels etc. The Aluminium Bus Bar shall be of suitable length, 500 volts, 3 phase 50 Hz TPN, electrolytic aluminium as per IS 8623 . The panel feeders shall be suitable for terminating suitable nos. 3.5 / 4 core armoured aluminium cable or Aluminium Bus Duct as required.
-
-
-
... More
All Incoming / bus coupler / Outgoings ACB's shall have inbuilt microprocesor based Over load protection (L), Short Circuit protection (S), Instantaneous Short Circuit protection (I), Earth Fault protection (G), Shunt Trip releases. All ACB should have Ics=Icu=Icw=50 KA for 1 sec, fully rated at 50 deg C ambient temperature & shall be supplied with adopter terminal connection whose orientation can be changed at site. All ACB shall be supplied with all standard accessories i.e. auxillary switch with 4NO + 4NC contacts, cradle, handle, safety shutter in confirmity with IS:60947
-
-
-
... More
All incoming & outgoing MCCB's shall be microprocessor based with O/L & S/C and E/F protection.
-
-
-
... More
All MCCB's shall be Ics = 100% Icu, with rotary handle & pad locking arrangement, with adjustable O/L & S/C trip setting as per load requirement. All TP MCCB shall be with heavy duty solid isolable neutral link.
-
-
-
... More
The breaking capacity specified for all ACB's and MCCB's breakers is Ics value (service rating).
-
-
-
... More
The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmeter, selector switches, cast resin type CT's & PT's, etc. Separate CT's shall be provided for protective and measuring system and for APFCR of capacitor bank with suitable VA.
-
-
-
... More
Each section of Panel shall have door opearted light of sufficent lux to illumunate that section & each section of capacitor, buscoupler, transformer and DG incomers shall have exhaust fans for ventilation purpose.
-
-
-
... More
All Energy Analyser / TVM Shall have RS 485 Modbus RTU on board Communication protocol for SCADA communication.
-
-
-
... More
INCOMERS from 1 Nos. 160 KVA T/F
-
-
-
... More
1 No. 315 Amp FP Moulded Case Circuit Breaker & 1 No 315 Amp 4 Pole Contactor.
-
-
-
... More
Protection releases / relays, Metering & Accessories for each Transformer incomers
-
-
-
... More
Surge Protection Device - Type - 01 (Class - B), 10/350 µ sec. (100 / 25KA)
-
-
-
... More
Over Voltage / Under Voltage relay / release (3 phase) with timer.
-
-
-
... More
Trip Circuit Supervison relay.
-
-
-
... More
TNC switch.
-
-
-
... More
Auto manual selector switch.
-
-
-
... More
1 nos. 0-500 volt range digital type voltmeter with selector switch
-
-
-
... More
1 set of 3 CT's of ratio 300/5A, Class 1.0 accuracy 15 VA burden for metering.
-
-
-
... More
1 set of 3 CT's of ratio 300/5A, Class 1.0 accuracy 15 VA burden for APFCR.
-
-
-
... More
1 set - 415 / √3 / 110 / √3 Class 1.0 accuracy 100 VA burden PT along with primary and secondary fuse.
-
-
-
... More
1 no. CT's of ratio 300/5A, Class 5P10 for protection.
-
-
-
... More
1 no. 0-300 Amp range digital type ammeter with selector switch.
-
-
-
... More
Energy analyser (digital type) consisting of I, V, KW, KWH, KVA, PF, HZ, MDI (EM 6400 of Conzerve or equi.) with RS 485 communication port for communication / report generation.
-
-
-
... More
Power factor meter.
-
-
-
... More
Frequency meter.
-
-
-
... More
3 Nos. LED type phase indicating lamps, each lamp shall be with bakup MCB along with hooter, auxillary relay, 2 sets of push buttons.
-
-
-
... More
5 Nos. LED type indicating lamp for indicating the status of feeder - ON / OFF / TRIP / Trip circuit healthy / DC supply healthy. Each lamp shall be with bakup MCB.
-
-
-
... More
INCOMERS from 1Nos. 160 KVA D G sets
-
-
-
... More
1 No. 315 Amp FP Moulded Case Circuit Breaker & 1 No 315 Amp 4 Pole Contactor.
-
-
-
... More
Protection releases / relays, Metering & Accessories for each D G set incomers
-
-
-
... More
Reverse power relay.
-
-
-
... More
TNC switch.
-
-
-
... More
Auto / manual / test selector switch
-
-
-
... More
1 Set - 415 /v3 / 110 / v3 Volts PT Class 1.0 accuracy and 100 VA burden along with primary & secondary MCB.
-
-
-
... More
0-500 volt range digital type voltmeter with selector switch
-
-
-
... More
1 set - 3 CTs of ratio : 300/5A , Class 1.0 accuracy 15 VA each burden for metering.
-
-
-
... More
1 set - 3 CTs of ratio : 300/5A , Class 5P20 accuracy 20 VA each burden for protection.
-
-
-
... More
0-600 Amp range digital type ammeter with selector switch.
-
-
-
... More
Energy analyser (digital type) consisting of I, V, KW, KWH, KVA, PF, HZ, MDI (EM 6400 of Conzerve or equi.) with RS 485 communication port for communication / report generation.
-
-
-
... More
Frequency meter.
-
-
-
... More
Power Factor meter.
-
-
-
... More
1 No -12 point Temp Scanner with Alarm/ Trip contact for winding & bearing.
-
-
-
... More
3 Nos. LED type phase indicating lamps, each lamp shall be with bakup HRC fuse/MCB along with hooter, auxillary relay, 2 sets of push buttons.
-
-
-
... More
5 Nos. LED type indicating lamp for indicating the status of feeder - ON / OFF / TRIP / Trip circuit healthy / DC supply healthy. Each lamp shall be with bakup HRC fuse/MCB.
-
-
-
... More
12 window annunciator with accept / reset / test push button for each DG set for following indications and alarm : set fail to start, engine over heat, high temperature, excitation failure, low lube oil pressure, over speed, low fuel oil level, cooling water flow failure, breaker trip, generator fault, DC control supply failure, out of limit voltages and spares.
-
-
-
... More
Push buttons for Test. Accept. Reset. Fault Reset. Engine start, Engine stop, ACB close, ACB Trip Emergency stop.
-
-
-
... More
Shut down due to low lube oil pressure/High water temp/Over speed/Low fuel level - set of 4 indication lamps.
-
-
-
... More
D G control incorporating engine start / stop indicating three attempt facility and on failure to start, engine lock out.
-
-
-
... More
1 nos battery charger with DC voltmeter and ammeter suitable for the DG sets (160 KVA)
-
-
-
... More
Note : In normal case all three lamps shall be ON to indicate that incoming power supply is available. In case of power resumption after failure buzzer shall ring to indicate the power supply is resumed. There shall be one push button to acknowledge the same.
-
-
-
... More
The ACB shall be electrically and mechanically interlocked with the bus coupler and Transformer incomers.
-
-
-
... More
1 nos. 63 amp FP MCCB (25 KA) with KWH meter for Solar Incomer.
-
-
-
... More
BUS BARS
-
-
-
... More
400 AMP, TPN busbars of aluminium alloy as per SLD.
-
-
-
... More
A M F logic / Panel -
-
-
-
... More
Automatic mains failure control including auto by-pass suitable for silent type DG set complete with relays, timers set of CTs for metering & proyection and energy analyser to indicate currents, phase and line voltages, frequency, power factor, KWH , KVARH & provision for overload, short circuit, restricted earth fault, under frequency, control cabling from AMF panel to diesel engine and elsewhere if required, all complete and inter locking including the following:
-
-
-
... More
Auto/Manual/Test/Off selector switch
-
-
-
... More
D G Start / stop push button, emergency stop push button,
-
-
-
... More
2 Nos. over voltage relay , 2 Nos. reverse power relay and 2 Nos. under voltage relay.
-
-
-
... More
3 sets of current transformers 15 P 10 accuracy for protection and 15 VA class-I for metering
-
-
-
... More
Energy analyser unit to indicate current voltage frequency power factor and KWH
-
-
-
... More
Indicating lamps for Mains ON/OFF, DG supply ON/OFF, DG running, DG fails to start.
-
-
-
... More
Fuse for instruments
-
-
-
... More
Battery charger, complete with transformer/ rectifier, D.C. voltmeter and ammeter, selector switch for trickle, off and boost and current adjustment.
-
-
-
... More
Main supply failure monitor
-
-
-
... More
Supply failure timer
-
-
-
... More
Restoration timer
-
-
-
... More
Control unit with three impulse automatic engine start/stop and failure to start lockout.
-
-
-
... More
Impulse counter with locking and reset facility.
-
-
-
... More
ON/OFF/Control circuit switch with indicator
-
-
-
... More
Audio/Vedio annunciation for
-
-
-
... More
(i) High water temperature
-
-
-
... More
(ii) Low lubricating oil pressure
-
-
-
... More
(iii) Engine over speed
-
-
-
... More
(iv) Engine fails to start
-
-
-
... More
(v) Full load/ maximum load warning
-
-
-
... More
OUTGOINGS:
-
-
-
... More
01 Nos. 125 Amp TP MCCB (25 KA)
-
-
-
... More
07 Nos. 63 Amp TP MCCB (25 KA)
-
-
-
... More
06 Nos. 40 Amp TP MCCB (25 KA)
-
-
-
... More
Main LT Panel as described above
1
-
-
... More
AUTOMATIC POWER FACTOR CORRECTION PANEL (CAPACITOR PANEL)
-
-
-
... More
Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of 14 SWG CRCA sheet steel fabricated cubical type 60 KVAR A P F C Panel with consisting of 5 / 10 KVAR (at 415 Volts rated voltage of bank shall be 440 Volts) capacitor units in tier formation, housed in an integrated cubicle type automatic switching ON and OFF control panel, floor mounting, dust & vermin proof, front operated construction, enclosure class - IP 52, powder coated after proper treatment with 9 tank process with top/bottom removable gland plates, as required, double compression type cable glands, earth bus, hinged and lockable doors to achieve dust and vermin proof complete with all inter connections small wiring by min. 2.5 sq. mm. copper wires, ckt labels etc. The Aluminium Bus Bar shall be of suitable length, 500 volts, 3 phase 50 Hz TPN, electrolytic aluminium as per IS 8623 .
-
-
-
... More
All out going MCCB's shall be thermal-magnetic based with inbuilt O/L & S/C release.
-
-
-
... More
All MCCB's shall be Ics = 100% Icu, with rotary handle & pad locking arrangement, with adjustable O/L & S/C trip setting as per load requirement. All TP MCCB shall be with heavy duty solid isolable neutral link. The breaking capacity specified is Ics value. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmeter, selector switches, CT's, PT's, etc.
-
-
-
... More
AC3 duty contactors should be used for switching individual capacitor banks.
-
-
-
... More
The fault withstanding capacity of panel & its control gear shall be min. 25 KA rms for 1 sec.
-
-
-
... More
Each section of capacitor panel shall have Verticle hood & exhaust fans for ventilation purpose.
-
-
-
... More
INCOMING
-
-
-
... More
Incomer circuit breaker has been included in the main panel.
-
-
-
... More
1 set- 3 CTs , ratio 300 / 5A Class 1.0 accuracy 15 VA burden for metering.
-
-
-
... More
1Nos- (300 A) digital Ammeter with selector switch
-
-
-
... More
Micro processor based automatic power factor control relay (3 phase) (including power factor meter) in 9 steps for automatic cut off or add on capacitor units to keep the power factor at 0.95 with variation of loads. All associated auxiliary contactors / relays shall be provided with in the scope of work.
-
-
-
... More
Phase indicating lamps with HRC fuses, and indicating in each capacitor chamber unit to indicate On/Off status of capacitor unit.
-
-
-
... More
BUS BARS
-
-
-
... More
400 AMP, 500 Volts, 3 phase 50 HZ TPN high conductivity electrolytic Aluminium bus bar of suitable length, SMC / DMC supports, with colour coding and insulated by heat shrinkable sleeves and clips on shrouds for joints.
-
-
-
... More
OUTGOINGS
-
-
-
... More
5 nos. of 32 AMPS TPN 35 KA MCCB and 40 amps AC3 duty contactor with 10 KVAR heavy duty MPP type at 415 V capacitor bank (rated Voltage 440 Volts) , auto-manual selector switch, start stop push button for manual operation including on/off indicating lamps and delay timer complete.
-
-
-
... More
2 no. of 16 AMPS TPN 35 KA MCCB and 20 amps AC3 duty contactor with 5 KVAR heavy duty MPP type at 415 V capacitor bank (rated Voltage 440 Volts) , auto-manual selector switch, start stop push button for manual operation including on/off indicating lamps and delay timer complete.
-
-
-
... More
Capacitor Panel as described above
1
-
-
... More
EXTERNAL LIGHTING PANEL (OUTDOOR TYPE)
-
-
-
... More
Design, Manufacturing, Supply, installation, Testing & Commissioning of Outdoor Type Panel with Front & Back double door, Top canopy, Mounting on Floor M.S. Stand etc totally enclosed free standing type water, moisture, dust and vermin proof Sub Distribution Board made out of 2.0 mm thick CRCA sheet complete with following equipments, including ammeter, ammeter selector switch, voltmeter, voltmeter selector switch, indicating lamps, CT's, internal wiring with suitable size wires/ cable, interconnection, painting etc as required.
-
-
-
... More
INCOMING
-
-
-
... More
1 No 63 Amp FP Moulded Case Circuit Breaker (25 KA) with 63 Amp 4 Pole Contactor & Timer.
-
-
-
... More
1 No. Digital AVF Meter with inbuilt selector switch and CT' & SP MCB.
-
-
-
... More
1 Set of phase indicating lamps.
-
-
-
... More
1 Set of ON/OFF indicating lamps with SP MCB.
-
-
-
... More
BUS BARS
-
-
-
... More
200 Amp FP aluminium busbar with coloured heat shrinkable sleeve.
-
-
-
... More
OUTGOING
-
-
-
... More
08 Nos. 25 Amp DP MCB (10 KA)
-
-
-
... More
03 Nos. 40 Amp DP MCB (10 KA)
-
-
-
... More
Panel described as above
1
-
-
... More
Supply of following sizes of 1.1KV grade multicore aluminium conductor XLPE insulated and PVC sheathed armoured cable conforming to IS-7098. (Part-I) 1988.
-
-
-
... More
3.5 core, 185 sq.mm.
100
-
-
... More
4 core, 16 sq.mm.
210
-
-
... More
4 core, 10 sq.mm.
60
-
-
... More
3 core, 6 sq.mm.
250
-
-
... More
Supplying of 11 KV grade aluminium conductor, cross linked polyethylene (XLPE) insulated individual core screened, flat steel/strip armoured PVC sheathed cable complete as required. 3C x 240 Sqmm, 11 KV XLPE
120
-
-
... More
Supply Supply & Laying of following sizes of 1.1KV grade Copper conductor XLPE insulated and FRLS PVC sheathed armoured control cable including termination conforming to relevant IS.
-
-
-
... More
4 core, 2.5 sq.mm.
20
-
-
... More
10 core, 2.5 sq.mm.
20
-
-
... More
12 core, 2.5 sq.mm.
20
-
-
... More
Supply, erection, testing and commissioning of following sizes of TV splitter of aluminium die cast body in suitable size of G.I. Box. 4 way
1
-
-
... More
Supply, erection, testing and commissioning of following co-axial cable in existing conduit.RG-11
50
-
-
... More
Supply & Fixing of Rubber mat 1000 mm. Wide to withstand 1.1 KV dielectric strength as per latest IS 15652-2006.
10
-
-
... More
Supplying and Laying of Rubber mat 1000 mm. Wide to withstand 11 KV dielectric strength as per latest IS 15652-2006 etc. as reqd.
3
-
-
... More
SUPPLY OF LIGHT FIXTURES & FANS
-
-
-
... More
Supply,of 18 Watt LED Light Fixture surface mounted round (Philips Make cat no-SM251C LED20S- 6500 PSU WH LED Light or equivalent).
37
-
-
... More
Supply of 40 watt LED Tube light fixture with electronic high efficiency electronic driver as complete as required. (Philips Make, Cat No--BN100C LED40S-6500 PSU L120 GR or equivalent).
127
-
-
... More
Supply of 10W LED Bulk Head Light (Philips make cat no- WT140W LED7S CW PSU S1 PC or equivalent).
21
-
-
... More
Supply of 10 watt LED Mirror light fixture wall mounted with electronic high efficiency electronic driver as complete as required. (Philips Make, Cat No- BN 021 LED12S 6500 PSU GR or equivalent).
2
-
-
... More
Supply of following sizes of heavy duty exhaust fan for single phase 230 volt, 50HZ AC supply complete with motor, blades, frame, bracket, louver/ shutter etc as required. (HavellS Make, Cat No - Ventil Air - DX White or equivalent). 250 mm Exhaust Fan (1500 RPM).
16
-
-
... More
Supply of following sizes of ceiling fan complete with double ball bearing, motor, blades, downrod, canopy, capacitor etc. suitable for operation on 230 volt, 50 Hz, A.C. supply complete as required. (Havells Make, Cat No-Efficiencia Neo (BLDC 26 W) or equivalent.) 1200 mm Ceiling Fan
8
-
-
... More
Supply, Installation, Testing & Commissioning of 6 Mtr High hot dip Galvanized Octagonal Pole with bottom 130mm A/F, top 70 mm A/F made up of 3 mm thick HT plate and 220x220x12 mm base plate and 1000 mm long single arm bracket complete with 4 Nos M20 x 700 mmlong " J type " foundation bolts, suitable RCC foundation etc as complete as required. (Make,- Philips / Bajaj / Lokozo).
6
-
-
... More
Supply, Installation, Testing & commissioning of outdoor type (IP 65) Bollard Light 180 mm dia, 500 mm height made out of cast aluminium, 7 W LED Light with 100 lumen / watt, warm white, stainless steel screw, corrossion & UV resistant coat, including suitable size of CC foundation, grouting bolt, plastering etc as complete as required. (Philips Make, Cat No--BCP150 LED150/WW PSU 220-240V 7043 or equivalent).
10
-
-
... More
Supply, Installation, Testing & Commissioning of 60 Watt LED, Street Light Fitting (IP 66) , made from PDC housing with finless design and high impact resistance (IK08) Polycarbonate cover with integrated, lumen output of minimum 4500 lumens and minimum efficacy of 100 Lumen / watt, Colour temperature- 5700K/6000K/6500K, CRI 80 suitable for operation on 220 Volt, 50 HTZ A.C. supply complete with all accessories as per specifications, including connection- enter connection and earthing etc as required. (Philips Make, Cat No--BRP062 LED 68 CW SLC S1 PSU or equivalent).
6
-
-
... More
UPS SYSTEM
-
-
-
... More
Supply, Installation, Testing & Commissioing of 5 KVA UPS in paralleling mode at 0.99 input power factor with SNMP card, compatible for BMS connectivity on backnet/MODBUS, Inbuilt Isolation transformer as per specification given in the document with following broad features.
-
-
-
... More
THD(i) shall be less than 3% in the entire loading range.
-
-
-
... More
UPS shall carry design output at 40 deg.
-
-
-
... More
Shall have soft start and hold of for incoming supply.
-
-
-
... More
Invertor capability to supply 150% load for 5 sec.
-
-
-
... More
Three Phase Input and Three Phase Output. (Input - 180V - 260V, Single Phase, 2 wire. / Output - 200-220 Volt, Single Phase, 2 Wire.)
-
-
-
... More
Shall not allow deep discharge of the battery and shall not go to 10.5 volts in case of 12 volt cells.
-
-
-
... More
Battery shall be external type with rack and suitable for 30 minute backup on 100% load.
-
-
-
... More
Suitable size of copper cable between UPS and battery bank shall be provided
-
-
-
... More
UPS described as above
1
-
-
... More
DATA, TELEPHONE SYSTEM INCLUDING ACTIVE COMPONENTS
-
-
-
... More
Supply, Installation, Testing & Commissioning of Cat 6, 24 Port Patch Panel
1
-
-
... More
Supply, Installation, Testing and Comissioning of Cat 6 patch cord 3 feet for rack and user end termination - 1Mtr
10
-
-
... More
Supply, Installation, Testing and Comissioning of Cat 6 patch cord 7 feet for rack and user end termination - 2Mtr
10
-
-
... More
Supply, Installation, Testing, Commissioning of Cat 6, Information Outlet (I/O) including G.I. Box and modular cover plate.
20
-
-
... More
Supply, Installation, Testing and Comissioning of 24U floor mounted Rack with accessories.
1
-
-
... More
Supply, Installation, Testing & Commissioning of 24 port 10/100/1000Mbps, 4SFP module, L-2 Switch, POE.
1
-
-
... More
Supply, Installation, Testing & Commissioning of EPABX SYSTEM Configuration as Below:- Analog Trunk Line 6 Nos.
Digital Line 2 Nos
Analog Extensions 20 Nos.
1
-
-
... More
Supply, Installation, Testing & Commissioning of Digital Phone for Operator Console
1
-
-
... More
Supply, Installation, Testing & Commissioning of Type Analog Phone with speaker phone, .
9
-
-
... More
Supply, Installation, Testing & Commissioning of 6 Core OM4 Multimode Fiber Cable as per technical specification.
30
-
-
... More
IP CCTV SYSTEM
-
-
-
... More
Supplying, installation, testing & commissioning of 1080p HD Indoor IP Dome camera with1/3-inch CMOS, Sensor pixels 1920 x 1080, Sensitivity-0.04 lx (color) , Dynamic range 75 dB Wide Dynamic Range (WDR), True day/night, Automatic Electronic Shutter, Video compression H.264 ; M-JPEG, White balance, BLC, H.264 quad-streaming, Motion/tamper/audio detection, Privacy Mask, Lens 3.6 mm lens, 3-axis adjustment (pan/tilt/ rotation), ONVIF Profile S, CE Certified.
4
-
-
... More
Supplying, installation, testing & commissioning of 5MP 30 fps HD indoor / outdoor IR IP bullet camera with 1/3‑inch CMOS, Sensor pixels 2612 (H) x 1980(V), Sensitivity-0.24 lx (color) 0.04 lx (mono) ,IR range 30 mtrs, Dynamic range 70 db, True day/night, Automatic Electronic Shutter, Video compression H.264 MP ; M-JPEG, White balance, BLC, Analog video output, Lens (zoom / focus) 3.6 mm lens, Two-way, full duplex Audio, Audio compression AAC, G.711, L16 , ONVIF Profile S, CE Certified.
2
-
-
... More
SITC of IP network recoder with following feature Processor - Dual-core embedded processor . Two-way Talk - 1 channel Input, 1 channel Output, RCA,Video Output - 1 HDMI, 1 VGA , IP Camera Input - 8/16/32 Channel IP , Compression - H.264+/H.264/MJPEG,Video Resolution - 2560 × 1920, 2048 × 1536, 1920 x 1080, 1280 x 1024, 1280 x 720, 1024 x 768 , Hard Disk - 4 SATA Ports, up to 8TB ,Motion Detection - MD Zones: 396 (22 × 18),Recording Mode - Manual, Schedule (Regular, Continuous), MD (Video detection: Motion Detection, Camera Blank, Video Loss), Alarm, Stop, Backup Mode - USB Device /Network , Interface Ports - 1 HDMI, 1 VGA, 2 USB(1 USB 2.0 , 1 USB 3.0 ), 1 RS485, 1 RS232, 1 RJ45.
1
-
-
... More
Supply, Installation, Testing and commissioning of Managable 24 port Switch with Power on Ethernet (PoE) enabled, 10/100, RJ45 Access ports with PoE complete as required.
1
-
-
... More
Supply, installation, testing and commissioning of of 6 TB HDD all accessories complete as required.
1
-
-
... More
Supply installation and commissioning of 32 inch LED monitor for disply of camera.
1
-
-
... More
HVAC
-
-
-
... More
Air Cooled Normal/Inverter Ductable Unit
-
-
-
... More
Supply, installation, testing & commissioning of Air Cooled Ductable Split Units.The evaporating unit shall be equipped with synthetic fibre filter s, insulated drain pan, safety controls, thermostat, suitable for refrigerant CFC free R 22/32/410A/407C all complete in a unit. The outdoor unit shall have condenser copper coil, fans with motor and drive, scroll compressor, panel, microprocessor with digital display,electronic expansion device etc. The unit shall be suitable for operating on 240 volt, 1 phase, 50 Hz AC supply with five star energy rating. The units shall be suitable for chorded remote operation. The refrigerant piping & cabling shall run in PVC sleeve Steel supporting structure for outdoor units suitable for wall mounting / floor mounting. Nothing extra shall be paid on any account i.e. refrigerant pipes, drain pipes etc.
-
-
-
... More
Providing, fixing and testing of copper refrigerant piping of appropriate sizes duly insulated with nitrile rubber insulation of 19 mm thickness and cabling for all types of AC units. The pipes plus nitrile rubber insulation and cable are to be covered with PVC flexible conduits for protection.
-
-
-
... More
Note: Providing and fixing of Powder coated M.S. angle iron frame work for outdoor unit is also included in the above scope. Contractor to submit design/Scheme for Iron frame and obtain approval of engineer/employer before proceeding purchase & installation.
-
-
-
... More
4.0 TR (1600 CFM) Ductable Split Unit
1
-
-
... More
5.5 TR (2200 CFM) Ductable Split Unit
2
-
-
... More
8.5 TR (3400 CFM) Ductable Split Unit
2
-
-
... More
11.0 TR (4400 CFM) Ductable Split Unit
2
-
-
... More
AIR COOLED SPLIT TYPE SPLIT UNITS AIR-CONDITIONER
-
-
-
... More
Supplying, installing, testing and commissioning of Air Cooled Invertor Split type wall mounted 5 Star Air conditioners with evaporating unit comprising of cooling coil, blower with motor and condensing unit comprising hermetically sealed scroll compressor, condenser coil, and propeller fan. Unit shall be complete with controls, interconnecting copper refrigerant piping with insulation, drain pipes and electrical cabling etc. between evaporative and condensing unit, refrigerant gas and oil and complete as per specifications. The unit shall be suitable for operating on 240 volt, 1 phase, 50 Hz AC supply with five star energy rating. The units shall be suitable for chorded remote operation. The refrigerant piping & cabling shall run in PVC sleeve Steel supporting structure for outdoor units suitable for wall mounting / floor mounting. Nothing extra shall be paid on any account i.e. refrigerant pipes, drain pipes etc.
-
-
-
... More
Capacity : 1.5 TR
1
-
-
... More
DRAIN PIPING
-
-
-
... More
Supply,installation,testing and commissioning of UPVC drain piping complete with fittings, supports as per specifications and duly insulated with 6 mm thick closed cell expanded polythene.
-
-
-
... More
25 mm ID
32
-
-
... More
32 mm ID
28
-
-
... More
40 mm ID
15
-
-
... More
VENTILATION SYSTEM
-
-
-
... More
Smoke Extraction Fan
-
-
-
... More
Supply, installation testing & commissioning of Fire Rated direct driven Axial flow fan. Each fan shall be complete with casing made from mild steel duly enamel painted, adjustable pitch die cast aluminum impeller (HUB & BLADES), mounting clits, structural frame with blank-off sheet, anchor fastener with vibration isolation pad, bird screen at one sides (entry for supply air and exit for exhaust air) and rated Motor with class-H insulation. Motor shall be suitable for 415+10% volts, 50 cycles , 3 phase AC supply. with starter panel.
-
-
-
... More
Note: Contractor Has to take approval on computer generated selection charts and fan curves showing power input and fan motor etc. prior to order the fans,(a) Noise level @ 3m from Fan shall be less than 78 dBA. with starter panel
-
-
-
... More
Note:-These fans would be connected to the fire alarm system of the building and would start automatically in case of Fire
-
-
-
... More
Each fan Capacity 8000 CFM, SP 20 mm wg
1
-
-
... More
Each fan Capacity 9000 CFM, SP 20 mm wg
1
-
-
... More
Supply, installation testing & commissioning of direct driven Axial flow fan. Each fan shall be complete with casing made from mild steel duly enamel painted, adjustable pitch die cast aluminum impeller (HUB & BLADES), mounting clits, structural frame with blank-off sheet, anchor fastener with vibration isolation pad, bird screen at both sides and rated Motor with class-F insulation. Motor shall be suitable for 415+10% volts, 50 cycles , 3 phase AC supply. with starter panel.
-
-
-
... More
Note: Contractor Has to take approval on computer generated selection charts and fan curves showing power input and fan motor etc. prior to order the fans,(a) Noise level @ 3m from Fan shall be less than 78 dBA. with starter panel
-
-
-
... More
Note:-These fans would be connected to the fire alarm system of the building and would start automatically in case of Fire
-
-
-
... More
Each fan Capacity 8000 CFM, SP 20 mm wg
1
-
-
... More
Each fan Capacity 9000 CFM, SP 20 mm wg
1
-
-
... More
Supply, installation, testing, commissioning of Inline fan with vibration isolators & speed regulator, complete as per specification and drawing. The Motor shall be suitable to run on 1 phase/50 hz/ 220 v electrical power.
-
-
-
... More
300 cfm, 10 mm static pressure
1
-
-
... More
Supply, installation, testing, commissioning of ceiling mounted fan with gravity louvers, vibration isolators & speed regulator, complete as per specification and drawing.
-
-
-
... More
300 CFM
2
-
-
... More
Supply. Installation, testing and commissioning of factory fabricated G.I. Sheet metal ducts with flanges, inbuilt sealant, gasket, supports, vanes, dampers, links, levers and quadrants etc. as per specifications and drawings. Duct shall be furnish at site in "L" shape or box shape from factory. The rates shall include all materials of the duct and labour for suspension and supporting arrangement for plenums, ducts, complete with fire retardant flexible connection as required and as per specifications.
-
-
-
... More
0.63 MM (24 Gauge )
225
-
-
... More
0.80 MM (22 Gauge )
105
-
-
... More
1.00 MM (20 Gauge )
1
-
-
... More
1.25 MM (18 Gauge) Plenum
40
-
-
... More
Supply. Installation, testing and commissioning of insulation on the surface of the duct with duly laminated aluminum foil of mat finish closed cell nitrile rubber (Class 'O' ) with suitable adhesive, as per specifications and drawings. The Joints shall be sealed with 50mm wide and 3 mm thick self adhesive nitrile rubber tape Insulation. The rates shall include all materials of the insulation and labour works with adhesive, complete as required and specifications.
-
-
-
... More
19 mm
295
-
-
... More
25 mm
26
-
-
... More
Supply and fixing of acoustic lining of supply air duct and plenum with thick Engineered Nitrile Rubber open cell foam having a Noise Reduction Coefficient of 0.55 with Density 140 - 180 Kg/m3 passing Class 1 Fire Performance test as per BS 476 Part 7, Air Erosion test for 10,000 fpm air velocity as per ASTM C 1071-05 and with built-in antimicrobial protection. The material should pass Fungi Resistance Test as per DIN EN ISO 846 Method A and Bacterial Resistance Test as per DIN EN ISO 846 Method C; to be applied using manufacturer's recommended Rubber based Adhesive in a blend of solvents.
-
-
-
... More
20 mm
75
-
-
... More
25 mm
1
-
-
... More
Supply. Installation, testing and commissioning of G.I construction Duct/ Volume control Dampers for Controlling the Airflow in Ducts with neoprene rubber gaskets,nuts, Bolts, Screws Linkages, Flanges etc. as per specification.
2
-
-
... More
Supply. Installation, testing and commissioning of powder coated extruded aluminum sections grills as per specification.
4
-
-
... More
Supply. Installation, testing and commissioning of powder coated extruded aluminum section grills with dampers for supply air terminal for air-conditioning as per specification.
4
-
-
... More
Supply. Installation, testing and commissioning of powder coated extruded aluminum square diffusers with antismudge ring and removable core.
-
-
-
... More
Supply air with dampers
1
-
-
... More
Return air without damper
1
-
-
... More
Supply. Installation, testing and commissioning of thermal flexible aluminum duct of following sizes duly supported at regular interval as per site requirement & spefications. 200 mm
30
-
-
... More
Supply. Installation, testing and commissioning of slot diffusers with/without damper as specified below and as per specification.
-
-
-
... More
3-Slot Diffuser
1
-
-
... More
2-Slot Diffuser
1
-
-
... More
Supply. Installation, testing and commissioning of powder coated extruded aluminum Linear Grille.
-
-
-
... More
100 mm
30
-
-
... More
150 mm
65
-
-
... More
200 mm
2
-
-
... More
Supply. Installation, testing and commissioning of exhaust air/fresh air louvers of powder coated extruded aluminum construction with bird screen, minimum 80 mm deep.
3
-
-
... More
Supply, Installation, Testing & Commissioning of following Switchgears as an Isolator in IP-65 rated in power coated 16 SWG sheet steel enclosure of suitable for Duct type Outdoor Unit.
-
-
-
... More
40A 4P MCCB(16 KA)
2
-
-
... More
63A 4P MCCB(16 KA)
4
-
-
... More
Supply, laying, testing and commissioning of power and control cabling as per specification given in the tender.
-
-
-
... More
A) Power cabling (XLPE insulated Aluminum / Copper conductor as given below armoured / unarmoured cables of 1.1 KV Grade) including cable end termination with brass compression glands & lugs etc. as per specification.
-
-
-
... More
Note:- Power cable with earthing shall be made available near indoor / outdoor units. Only termination into HVAC equipment's (Indoor & Outdoor) shall be done by HVAC Contractor.
-
-
-
... More
4C x 10 Sq. mm Copper Conductor (Armoured) For Ductable Unit
30
-
-
... More
4C x 6 Sq. mm Copper Conductor (Armoured) For Ductable Unit
20
-
-
... More
Signage
-
-
-
... More
Reception Back Wall Signgae Laser Cut 5 mm Acrylic Letters with Pasted over 5 mm Acrylic Sheet with 6 studs 4 Feet by 3 Feet
12
-
-
... More
Reception Hanging Signge Double Sided Laser Cut 5 mm Acrylic in desired color with Plotter Cut Vinyl Letter Double Side as required 4 Feet by 2 Feet
8
-
-
... More
Toilet Male Door Signage Laser Cut 5 mm Acrylic Signage with Plotter Cut Vinyl letters pasted above & Desired color vinyl pasted on Back 4 Inch18 Inch by
1
-
-
... More
Staircase Door Signage Laser Cut 5 mm Acrylic Signage with Plotter Cut Vinyl letters pasted above & Desired color vinyl pasted on Back 4 Inch18 Inch by
1
-
-
... More
Medical Store Door Signage Laser Cut 5 mm Acrylic Signage with Plotter Cut Vinyl letters pasted above & Desired color vinyl pasted on Back 4 Inch18 Inch by
2
-
-
... More
Electrical Room Door Signage Laser Cut 5 mm Acrylic Signage with Plotter Cut Vinyl letters pasted above & Desired color vinyl pasted on Back 4 Inch18 Inch by
1
-
-
... More
Lift Lobby Directory Signage Laser Cut 5 mm Acrylic in desired color with Plotter Cut Vinyl Letter as required 2 Feet by 4 Feet
8
-
-
... More
Lift Lobby Lift Wall Signage Laser Cut 5 mm Acrylic in desired color with Plotter Cut Vinyl Letter as required 1 Feet by 2 Feet
2
-
-
... More
Ramp Hanging Signge Double Sided Laser Cut 5 mm Acrylic in desired color with Plotter Cut Vinyl Letter Double Side as required 4 Feet by 2 Feet
32
-
-
... More
Medical Store Door Signage Laser Cut 5 mm Acrylic Signage with Plotter Cut Vinyl letters pasted above & Desired color vinyl pasted on Back 4 Inch18 Inch by
4
-
-
... More
Staircase Door Signage Laser Cut 5 mm Acrylic Signage with Plotter Cut Vinyl letters pasted above & Desired color vinyl pasted on Back 4 Inch18 Inch by
2
-
-
... More
Medical Store Door Signage Laser Cut 5 mm Acrylic Signage with Plotter Cut Vinyl letters pasted above & Desired color vinyl pasted on Back 4 Inch18 Inch by
2
-
-
... More
Lift Lobby Directory Signage Laser Cut 5 mm Acrylic in desired color with Plotter Cut Vinyl Letter as required 2 Feet by 4 Feet
2
-
-
... More
Lift Lobby Lift Wall Signage Laser Cut 5 mm Acrylic in desired color with Plotter Cut Vinyl Letter as required 1 Feet by 2 Feet
2
-
-
... More
Ultrasonic Advanced Rodent Repellent System
-
-
-
... More
Supply, laying, testing and commissioning of Main Rodent Controller suitable to connect 20 Transducers, each Transducers covering @ 300sft at room area and @ 150sft at false ceiling and false flooring area.
4
-
-
... More
Supply, laying, testing and commissioning of of Transducers
80
-
-
... More
Supply, laying, testing and commissioning of Wire Bundle - 92 mtr
1100
-
-
... More
Supply, laying, testing and commissioning of Stand & Bracket
4
-
-
... More
Packing & Shipping Ultrasonic Advanced Rodent Repellent all Matrerial.
4
-
-
... More
Add 18% GST
18
-
-
... More
Add 1% Labour cess 1%
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements