State Building Construction Corporation Limited Tender
... More
Search from across the categories, cities, and authorities to find the latest Jharkhand tenders. Every Jharkhand tender is curated from credible sources of government websites (eProcurement Jharkhand portal) and newspapers, thus ensuring the credibility of the information presented to you. For more information on Jharkhand tender bidder registration, the login process and more read the FAQs section on this page.
Costs
EMD
₹ 51,93,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_JSBCC_98589_2Tender No
JSBCCL/120/2024-25Tender Authority
State Building Construction Corporation Limited ViewPurchaser Address
-Website
http://jharkhandtenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Earth filling in foundation trenches and plinth in layers not exceeding 150 mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M. and lift of 1.5 M all complete as per building specification and direction of E/l (Mode of measurement compacted volume).
3572.54
-
-
... More
Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including' cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement complacted volume).
725.09
-
-
... More
Providing designation 75 A brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l
559.83
-
-
... More
Providing designation 75A brick work in CM (1:6) in superstructure with approved quality of clean coarse & of F.M. 2.5 including providing 10mm thick mortar joints cost of screening, racking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.
12.24
-
-
... More
Providing designation 125 mm thick reinforced designation 75 A brick work in C.M (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, carriage of materials , scafolding, raking out joints to 15 mm depth, curing, taxes and royalty ( but excluding the cost of reinforcement) all complete as per building specification and direction of E/l.
13.2
-
-
... More
Providing designation 100A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9" x 4.5" x 3") in C.M. (1:6) in superstructure with approved quality of clean sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.
1671.37
-
-
... More
Providing 112mm thick reinforced designation 100A brickwork fly ash lime brick (FLAG) confirming to IS 12894-1990 (9" x 4.5" x 3") in C.M. (1:4) in superstructure with approved quality of clean sand of F.M. 2 to 2.5 including the cost of screening carriage of material scaffolfing raking out joint to 15mm depth curing taxes and royalty (but excluding the cost of reinforcement ) all complete as per building specification and direction of E/I.
2867.83
-
-
... More
Extra for brick work for each consecutive floor above first floor including watering and scafolding, all complete as per direction of E/l.
2899.13
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
... More
1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
223.8
-
-
... More
1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)
248.17
-
-
... More
1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size)
122.44
-
-
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor,etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1½:3 (1 cement:1½ coarse sand:3 graded stone aggregate 20 mm nominal size)
22.52
-
-
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
80.03
-
-
... More
Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size).
228.45
-
-
... More
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.
216
-
-
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)
29.58
-
-
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
18.38
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete
676.18
-
-
... More
Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets,
kerbs and steps etc.
287.55
-
-
... More
Suspended floors, roofs, landings, balconies and access platform
11014.04
-
-
... More
Shelves (Cast in situ)
36.83
-
-
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers
10667.07
-
-
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
5588.69
-
-
... More
Stairs, (excluding landings)
439.92
-
-
... More
Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like
492.47
-
-
... More
Weather shade, Chajjas, corbels etc., including edge
46.7
-
-
... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
81
-
-
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately.In case the cement content in design mix is more than 1.10% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth level. Concrete of M30 grade with minimum cement content of 350 kg /cum
1398.59
-
-
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately.In case the cement content in design mix is more than 1.10% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works above plinth level upto floor V level Concrete of M30 grade with minimum cement content of 350 kg /cum
3616.52
-
-
... More
Add for using extra cement in the items of design mix over and above the spedified cement content therein
11227.67
-
-
... More
Supplying, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows skylights, fanlights and C/W celetial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all completeas per building specification and direction of E/I.
12.35
-
-
... More
Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush door shutter in door and windows with black board core blended with high quality phenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I.
148.68
-
-
... More
Supplying, fitting and fixing 35mm thick solid core type non-decorative double leaf flush shutter in door and windows with black board core blended with high quality phenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I.
158.4
-
-
... More
Providing Tor steel reinforcement of 8mm. dia. rods as per approved design and drawing with cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. TMT Fe 500 ( Only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steels Ltd.. Bokaro, and Vizag (RINL).
190.88
-
-
... More
Providing Tor steel reinforcement of 10mm. ,12mm & 16mm dia. bars as per approved design and drawing with cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l.
-
-
-
... More
(a) 10mm TMT Fe 500 ( Only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steels Ltd.. Bokaro, and Vizag (RINL).
190.26
-
-
... More
(b) 12mm TMT Fe 500 ( Only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steels Ltd.. Bokaro, and Vizag (RINL).
234.64
-
-
... More
(c) 16mm TMT Fe 500 ( Only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steels Ltd.. Bokaro, and Vizag (RINL).
234.64
-
-
... More
Providing Tor steel reinforcement of 20mm. 25mm. 28 mm, 32mm dia. bars as per approved design and drawing with cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. 20/25mm TMT bar Fe 500 (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)})
-
-
-
... More
20/25/28/32 mm TMT bar Fe 500 (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)})
93.31
-
-
... More
Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth , carriage of grill to work site, hoisting as per building specification and direction of E/l. (where materials is not supplied by the deptt.)
4099.28
-
-
... More
Supplying , fitting and fixing callapsible gate of apporoved size and make properly fabricated with vertical double channels 20x10x2 mm. at 100mm. Centres and braced with M.S flat diagonals 20 x 3 mm,with top and bottom rails of T. iron 40x40x6 mm with 38 mm dia steel pulleys complete with bolts nuts, locking arrangements stoppers, handles, including applying a primer coat of led paint carriage hosting and taxes all complete as per building specification and direction of E/I.
6.3
-
-
... More
Providing designation 75A one Brick Flat Soling joints with local sand including cost of watering taxes royalty all complete as per building specification & direction of E/I.
2436.37
-
-
... More
Providing 12 mm cement plaster (1:3) with clean coarse sand of F.M 1.5 with floating coat of neat cement in skirting including rounding of junctions with floor, curring, taxes and royalty all complete as per building specification and direction of E/l.
20.7
-
-
... More
Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I. With commercial grade colour tiles 15X15cm Tiles.
1507.03
-
-
... More
Providing and laying Double charged vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less then 0.08% and conforming to IS: 15622/ISO 13006 of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement:4 Coarse sand0, jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with wite cement and matching pigments etc, complete Size of tiles 600 x 600 mm.
4742.62
-
-
... More
Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.
131.52
-
-
... More
Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.
24891.39
-
-
... More
Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.
10603.8
-
-
... More
Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/l.
364
-
-
... More
Providing 25 mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.
232.48
-
-
... More
Extra for plaster work over exterior surface for each consecutive floor above first floor including cost of scaffolding etc. all complete as per direction of E/l.
10738.9
-
-
... More
Making 6x6mm grooves in plaster surface over walls truely horizontal or verical as specified at regular intervals, at all heights including cleaning, finishing scaffoding and curing with all leads and lifts of water all complete as per building specification and direction of E/l.
980
-
-
... More
Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding, washing of floors and taxes all complete as per building specification and direction of E/l.
27639.44
-
-
... More
Providing French spirit polishing over new wooden surface to give desired texture and gloss with approved make and shade of ready mixed French polish including preparing the surface after cleaning removing dirt,scales grease including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.
736.99
-
-
... More
Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing rust , dirt, , scales , smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/l. ( Mode of measurement Area shall be multiplied by the co-efficient as indicated in building specification)
1641.3
-
-
... More
Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.
1641.3
-
-
... More
Providing 250mm. wide brick drain in cement mortar (1:6) with av. 250mm. clear depth and 250mm. apron including cost of earthwork involved with 75 mm. cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base, the drain duly plastered in C.M.(1:3) with punning over exposed surface all complete as per building specification and direction of E/l.
216
-
-
... More
Water proofing for old and New Roof Slab :- Providing and laying water proofing treatment on roof slab by applying two Component, factory designed, ready to use, acrylic modified flextble material brush, roller or spray for water proofing coating per manufacturer Specifications with following steps :-(a)surface preparation .-Providing and cleaning of concrete surface to remove dust, oil, grease including removal of existing (loose paint / coating, and cement laitance by cleaning with compressed air water jet including all materials, labour, tools complete. Ponding test to be done after plugging all outlets and to be checked from soffit to identify seepage leakage. On identification of seepage cement grouting to be done with non shrink expanding admixture of Sika India Pvt.L.td.) MYK Schomberg / Dr Fixiti/ Fosroc or equivallent. Providing and reparing of all Corner and joints such as those between the parapet wall and the roof slab etc shall be chamfered with 150Mrn X 150 mm fillet of mortar (Cement: sand - 1:4) admixed with acrylic pc?' lymer of Sika/ Fosroc/MYK Schomberg/Dr 1:4) admixed with acrylic polymer of Sika/ Fosroc/MYK Schomberg/Dr Fixit or equivalent.,Befor 'Chamfering a prime coat shall be given with the slurry of acrylic polymer Repairing surface irregularities, damaged concretein base slab, dead cracks if any, with an acrylic polymer modified repair mortar-including a coat of bonding agent of the same with cement slurry including all material, labour, tools complete.(b)lst Coat :- Apply 1st coat of two component acrylic modified, ready to use, flexible cementitiot.is material on surface saturated dry roof and inside wall of Parapet.Wall upto 600 mm by brush or roller . After 1st coat of application , 45 gsm of Fibre glass cloth to lay when the first layer is still green. 1st coat shOUld be applied @1.50 kg/Sqmt/coat. For the purpose of measurer-11609-1'e entire treated surface will be measured." (c) 2nd Coat :-To apply the 2nd coat of two component acrylic modified read to use, flexible cementtiOus material right angle to the 1st. coat over the glass fibre laid surface: 2nd coat-,should be applied @ 0.7 Sqmt/coat. For the purpose of measurement the entire treated surface will be measured." After three days of drying the 2nd coat , the rain water outlets to be plugged and ponding test to be done for 48 hours to identify seepage, leakage from soffit and if found necessary rectification to be done as per satisfaction of E/C. The waterproof coating to be protected from damage before screed over it. Water proofing Brand:- Sika Topseal 109hi / Fosroc Brushbond RFXI Dr. Fixit Pidiffin 2K / MYK Aquafin TG . Product Performance - Chemical Base Part A: Acrylic copolymer, Part B: Specially graded cementitious powder - Density 1.6 kg/I (mixed density) at +27°C Tensile Strength -2 Nimm2 after 28 days (with Fibre cloth) (According to ASTM D 2370) Pullout Bond Siren th -2 f\l/mm2 concrete failure Accordin' to ISO4624) Slant-Shear Bond Strength -4 Nimm2 (According to FIP 5.15) Elongation at Break -35% Without Fibre Cloth and 20% with Fibre Cloth (According to ASTM D 2370) (d) )Protection of treated surface with PCG :- The treated surface should be covered with 25mm/50mm F'CC of M-20 grade (1.1.5:3). with proper slope ( 1:120) towards the rain outlets in alternate panels of 2 mt x 2 mt keeping 6 rnm gap between the panel joint. Integral water proofing admixture conforming to IS 2645 co of 100 ml per bag of of cement to be added in the screed concreie(paid separately.for this items).All corners shall be chamfered with 150mm X 150 mm fillet. The rainwater outlets shall be just leveled with the screed concrete to ensure smooth discharge of water - the peripheral gaps between pvc pipe outlet and concrete surface should be packed prorSeqswith ridti:corict'ete and the peripheral mouth to be sealed with,moisture insensitive epoxy putty of. Sika India .Pvt.Ltd. / MYK Schornbefg /Dr Fixit/Fosroc .For the purpose of measurement the entire treated surface will be measured." (e)Groove of PCC surface should be filled with POlysulphide Sealant.(Paid Separately). Be d - Sika India Pvt.Ltd. / MYK Schomberg / Dr Fixit/Fosroc . Warranty for five years.
2021.29
-
-
... More
Covering of treated surface with PCC :-providing 25 mm thick Cement Concrete M20 (1:1:5:3) maintaining slope in alternate 2 mt x 2mt panels With approved quality of stone chips of 20mm to 6 mm size graded and Cleaned sand of F.M.2.5 to 3 including screening, shuttering, and mixing Cement concrete in mixer with admixture of integral water proofing and Placing in position, striking curing, taxes and royalty all complete as per Building specification and direction of E/I. Panels that has been left should Be casted next day. There should be 6 mm gap between panels .brand- Sika _ plastocrate plus, MYK proof WP 10, Fosroc- Conplast X 421 ic Dr Fixit Pidiproof LM+
2021.29
-
-
... More
Providing and mixing liquid integral water proffing compound in conctrete of plaster as manufacturer specification and as per direction of engineer in charge. Brand. Sika plastocrate plus, MYK proff WP 10, Fosroc-Conplast x 4211C, Dr.Fixit, Pidiproff LW+ or Equivalent
3192.89
-
-
... More
Providing and filling of 6 mm thick Groove between 25 mm PCC Panels with Polysuiphide Sealant (Porin.g Grade)as per drawings and technical specificationsi6nd direction of E in Charge. (with 18% GST) B rand Sika Polysulphide, Fosrpc-Thioflex 600 Dr. Fixit Pidiseal PS(42P. MY K Seal PS or Euivalent.
2270.78
-
-
... More
HYDT of Driling 200mm x 165mm x 125 meter.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressure and equipments as well as fuel, lubricants and cost of transportation of rig machine annd other vehical up to Site.(Basic rates)
-
-
-
... More
(a) From 0 - 50 meter
150
-
-
... More
(b) From 51 - 125 meter
200
-
-
... More
Supplying submersible pump sets confirming to IS 8034 and motor confirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller. Motor suitable for working on 415V + 10%, 3PH, 50 Hz, A.C. supply with cable guard, thurst carbon/fiber bearing to withstand entire hydraulic thurst, water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thurst stream lined non return valve shall be provided with pump, 3 metre submersible copper conductor cable in single/double run shall be provided with each pump.
Submersible pump set 100mm dia (with Polypropylene/Noryl Impeller) up to 20 stages
2 HP
2
-
-
... More
Supplying Fully automatic star delta starter to operate induction motor working on 415v,3phase,50 hz with no volt coil, Overload element, ON-OFF push buttons, with necessary materialsand connected to supply, etc complete starter with original sheet steel encloser
2
-
-
... More
Supply fitting and fixing GI pipe 50 mm Dia (TATA or equivalent make) Medium Quaility as per IS:1239 ( part 01 ) 2004
230
-
-
... More
Supplying chemical emulsion in sealed containers including delivery as specified.-Chlorpyriphos emulsifiable concentrate of 20%
1243.4
-
-
... More
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:-With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
2238.04
-
-
... More
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
2867.83
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite stone slab colour black, Cherry/Ruby red Area of slab over 0.50 sqm
37.35
-
-
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work
563.07
-
-
... More
Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete.8 mm thick:Granite of any colour and shade
34.2
-
-
... More
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.Granite Stone of approved shade
21.6
-
-
... More
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including:
(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.
(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.
(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places
831.6
-
-
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm
115
-
-
... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper
115
-
-
... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.5mm thick
614.16
-
-
... More
Providing and fixing factory made uPVC glazed/wire mesh windows/
doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape,colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and lnline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head,comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 1 4 , plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit
with/ without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately.
Note:- Structural design proof checked from a Government
Engineering Institute, to be provided by the manufacturer for
(i) Sites with basic wind speed 45 m/sec as per IS 875 -- Part 3
(ii) Sites with structure height more than 20m for all wind speeds.Ventilator Casement window single panel with or without
fixed panel with S.S. 304 friction hinges as per size and
weight of sash, single point locking zinc alloy (zamak)
powder coated handles.Using R2 series with frame (39 mm & above) x (39 mm & above) & sash /mullion (39 mm & above) x (60 mm & above). (Height upto 1.2 metre
273.29
-
-
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
31399.86
-
-
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover
130.53
-
-
... More
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
350
-
-
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
3094.5
-
-
... More
Extra for pre finished nosing to treads of steps of marble stone.
563.07
-
-
... More
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.
392.42
-
-
... More
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
108.38
-
-
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab of colour Black, Cherry/Ruby
Red or equivalent
3408.37
-
-
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
... More
75 mm diameter
979.2
-
-
... More
110 mm diameter
1427
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
... More
Coupler 75 mm
92
-
-
... More
Coupler 110 mm each
132
-
-
... More
Single pushfit Coupler 75 mm
92
-
-
... More
Single pushfit Coupler 110 mm
92
-
-
... More
Single tee with door 75x75x75 mm
92
-
-
... More
Single tee with door 110x110x110 mm
92
-
-
... More
Single tee without door 75x75x75 mm
92
-
-
... More
Single tee without doo 110x110x110 mm
92
-
-
... More
Bend 87.5° 75 mm bend
92
-
-
... More
Bend 87.5° 110 mm bend
112
-
-
... More
Shoe (Plain) 75 mm Shoe each
92
-
-
... More
Shoe (Plain) 110 mm Shoe
112
-
-
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm
140
-
-
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :'12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)
2369.99
-
-
... More
Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity 0.043 w/mK.
6567.48
-
-
... More
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
3799.16
-
-
... More
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
3799.16
-
-
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
35237.76
-
-
... More
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.
5185.34
-
-
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
466.68
-
-
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-35 grade with approved color design and pattern.
5185.34
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap
52
-
-
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 178 mm
5
-
-
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia
52
-
-
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Circular shape 450 mm dia
32
-
-
... More
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
42
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and marking necessary holes for inlet outlet and overflow pipes but without fittings and the base support for tank.
10000
-
-
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore
75
-
-
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore
75
-
-
... More
Providing and fixing C.P. brass Stop Cock (concealed) of standard designand of approved make conforming to IS 8931. 15mm nominal bore
214
-
-
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore
186
-
-
... More
Providing and fixing PTMT grating of approved quality and colour.Circular type-125 mm nominal dia with 25 mm waste hole
176
-
-
... More
Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gm
52
-
-
... More
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
54
-
-
... More
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length
176
-
-
... More
Providing and fixing C.P. extentsion Nipples 15mm size with 12” BSP threads, 70mm length and 30 mm bredth and weight not less than 18gms
62
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc
-
-
-
... More
15 mm nominal dia Pipes
2668.3
-
-
... More
20 mm nominal dia Pipes
468
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work
-
-
-
... More
25 mm nominal dia Pipes
619
-
-
... More
32 mm nominal dia Pipes
840
-
-
... More
40 mm nominal dia Pipes
1020
-
-
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 150 mm dia. R.C.C. pipe
240
-
-
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :450 mm dia. R.C.C. pipe metre
1728.45
-
-
... More
Supplying and fixing C.I. cover without frame for manholes : 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg
6
-
-
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)
273.29
-
-
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With brass cover plate minimum 1.25 mm thickness
62
-
-
... More
Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar
230
-
-
... More
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
163.86
-
-
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
220.89
-
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 200 mm nominal size dia
50
-
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 100 mm nominal size dia
50
-
-
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
9.81
-
-
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
9.81
-
-
... More
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
4
-
-
... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200 mm dia
4
-
-
... More
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 200 mm clamp
4
-
-
... More
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).
The weight of aluminium extruded section shall be taken for purpose of payment.
4069.95
-
-
... More
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: (a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including: (b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.
(c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass. (d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.
(e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge. Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this sub- head. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. up to two decimal places. Note:-2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately. The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NABL accredited lab or any other accreditation body which operates in accordance with ISO/ IEC 17011 and accredits labs as per ISO/IEC 17025
1. Performance Laboratory Test for Air Leakage Test (-50pa to - 300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr
2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testing method for a range up to 2000 ml.
3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method for a range upto 2000 ml
4. Structural Performance Deflection and deformation by static air pressure test (1.5 times design wind pressure without any failure) as per ASTME-330-10 testing method for a range upto 50 mm
5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for Qualitative test, Tests to be conducted on site.
6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml
1356.65
-
-
... More
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.25.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/ m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement
1356.65
-
-
... More
Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer- inCharge
43.2
-
-
... More
Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/ beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof.
The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured
419.8
-
-
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.Frame size 65 x 100 mm
272.25
-
-
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately) 25 mm thick
86.63
-
-
... More
Providing and fixing Sink Cock with Swinging casted spout
5
-
-
... More
Supplying of Ply Wood (national or equivalent )25 mm Thick tongued and grooved in flooring, including fixing with iron screws complete
1736.1
-
-
... More
Carriage of materials from source to site work including loading & unloading all complete job as per specification and direction of E/I
-
-
-
... More
Sand
4812.09
-
-
... More
Aggregate
5043.06
-
-
... More
Stone Metal
849.28
-
-
... More
Brick
317.31
-
-
... More
Fly Ash Brick
824.12
-
-
... More
Supplying, fitting and fixing 40 mm high viterous white glazed earthen ware E.W.C. with "p" trap of Parry Hindustan or any other I.S.S. make including supplying & fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450 grms. , 15 mm P.V.C. alkathene pipe 45 cm long with brass coupling at both ends and white/ black plastic solid state seal and lead of commander/ cuckoo or other I.S.S. make with hinges or screw etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l.(A) With "P" trap (b)10.0 lit. low level PVC cistern
32
-
-
... More
Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of Parry Hindustan or any other I.S.S. approved make with 100 mm H.C.I., "p" trap 15 litres C.I.. or C. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32 mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I. body brass spindle stop cock of weight not less than 50 grms. 15 mm P.V.C. connection pipe 450 mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l.(A) 580 mm long (c) with 10.0 lit. low level P.V.C. cistern
20
-
-
... More
Supplying, fitting and fixing flat back or angular, lipped front viterous white glazed earthenware urinal of "Hindustan" " Parry" or any other approved I.S.S. make with all fittings with C.I. or R.S. brackets, standard size G.I. flush pipe with fitting clamps, 15 mm C.I. body brass spindle stop cock of approved quality weight not less than 400 grms. , 15 mm P.V.C. alkathene pipe 450 mm long with brass coupling at both ends and doing plumber joints including painting of exposed part with 2 coats of approved paint over a priming coat of red oxide, cutting wall and floor, making good the same etc. all complete as per specification and direction of E/l. (a) Flat back or standing corner (600mmX350mm)
40
-
-
... More
Supplying, fitting and fixing C.P. brass towel rail 20mmX600mm with bracket container
72
-
-
... More
Supplying, materrials and labour for constructing inspection chamber of designation class 75B brick size 750mm deep, 600X450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600X475mm G.I. cover with frame (weight not less than 35kg) alongwith earth work in excavation and 80mm thick PCC (1:3:6) in foundation and refilling all complete as per specification and direction of E/I.
203
-
-
... More
Point wiring in PVC conduit, with modular type switch:-
Wiring for light poinVfan poinUexhaust fan point/call bell point v/ith 1.5 sq.mm FR PVC insulated copper conductor single core in surface/recessed PVC conduit, with modular sw'itch, modular plate suitable GI box etc as required.Group-C
1461
-
-
... More
Power Plug Wiring in PVC conduit (2x4 sq. mm): Wiring for light/power plug with 2x4 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit along with 1 number 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.
2751
-
-
... More
Circuit / Sub-main wiring in PVC Conduit: Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required.
-
-
-
... More
2x1.5 Sqmm + 1x1.5 sqmm earth wire
23260
-
-
... More
2x2.5 Sqmm + 1x2.5 sqmm earth wire
5950
-
-
... More
4x6 Sqmm + 2x6 sqmm earth wire
520
-
-
... More
4x10 Sqmm + 2x6 sqmm earth wire
210
-
-
... More
4 x l6 sq.mm+ 2 x 6 sq.mm earthwire
200
-
-
... More
S/F Modular type switch/ socket :-Supplying and fixing of following sizes of PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required
-
-
-
... More
20 mm
7250
-
-
... More
25 mm
13630
-
-
... More
S/F Modular type switch/ socket :-Supplying and fixing of following modular switch / soket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
... More
5/6 amps, one way switch
146
-
-
... More
5/6 amps, 3 pin socket outlet
146
-
-
... More
S/F Modular type blanking plate :-
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
292
-
-
... More
S/F Modular boxes, base & cover plate :-
Supplying and fixing following size / modules , GI box along with modular base & cover plate for modular switches in recess etc as required
-
-
-
... More
1 or 2 module (78mmx 78mmx 45mm)
1281
-
-
... More
4/5 module (78mm x 140mm x 50mm)
50
-
-
... More
8/9 module (78mm x 230mm x 60mm)
30
-
-
... More
12 module (135mm x 205mm x 60mm)
20
-
-
... More
S/F light plug point with modular type accessories - Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch connection, painting etc. as required . (For light plugs to be used in non residential buildings)
151
-
-
... More
S/F power plug point with Modular type accessories - Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface of in recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular switch connection, painting etc. as required. (For light plugs to be used in non residential buildings)
131
-
-
... More
S/F Ceiling Rose: Supplying and fixing 2 pin 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.
170
-
-
... More
ITC cxhaust fan upto 450 mm. sweep :-
Installation of exhaust fan upto 450mm sweep in thc existing opening ,including making the hole to suit tho rizo of thc abovc fan, making good the damage, conoection , testing , commissioning atc . as required
24
-
-
... More
S/F MCCB in cubical panel board :-
Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required:25-100 amps, 16 KA, fixed thermal setting
4
-
-
... More
S/F,T.P. MCB DB :-
Supplying and fixing following way, horizontal type three pole and neutral,sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bat earth bar, din bar,interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator)
-
-
-
... More
4 way (4 + 12), Dorrble door, Horizontal type
9
-
-
... More
6 way (4 + 18), Double door, Horizontal type
16
-
-
... More
8 way (4 + 24), Double door, Horizontal type
10
-
-
... More
S/F VERTICAL TYPE TP MCB DB: Supplying and fixing the follwing way s amps urface/ recess mounting , vertical type , 415 volts , TPN MCB distribution board of sheet steel, , dust protected, duly powder coated, completed with 200 tinned copper busbar, common neutral link , earth bus bar, din bar, for mounting MCB detachable gland plate, interconnection including earthing etc. as required(without MCBs and incomer). as required.. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.):4 way (8 + 12), Double door, Vertical type
4
-
-
... More
S/F 'C' Series, MCB :-Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, esting and commissioning etc. as required.
-
-
-
... More
6/32 amps, Single pole
492
-
-
... More
40 amps, DP
12
-
-
... More
40 amps, TPN
41
-
-
... More
50/63 amps, TPN
22
-
-
... More
Supply and laying 8 SWG copper wire at 0,50 metre below ground level for conductor earth electrode, including solding etc. as required.
50
-
-
... More
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
90
-
-
... More
S/L 25mm x 6mm G.I. earth strip in ground :-
Providing and laying earth connection from earth electrode with 6 SWG dia G.L Wire in l5mm dia G.I. pipe from earth electrode, as required
100
-
-
... More
P/F G.I. lightning condutor finial :-
Providing and fixing of lighting conductor finial , made of 25mm dia
300mm long , G.I. tube, having single prong at top, with 85mm dia 6mm thick G.I. base plate including holes etc. complete as required.
4
-
-
... More
P/F G.I. lightning conductor tape in horizontal run :-
Providing and fixing G.I. tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor complete as required.( for Horizontal run ).
400
-
-
... More
P/F G.I. lightning conductor tape in Vertical run :-
Providing and fixing G.I. tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor complete as required.( for Vertical run ).
300
-
-
... More
Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size exceeding 95 sq mm but not exceeding 185 sq mm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
60
-
-
... More
Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size exceeding 185 sq mm but not exceeding 400 sq mm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
100
-
-
... More
LayIng of one number additional PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size exceeding 185 sq mm but not exeeding 400 sq. mm direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.
90
-
-
... More
Layrng and fxing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1 mm thick saddle)
100
-
-
... More
Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size not excecding 35 sq mm directr in ground including excavation and refilling the trench etc as rquired, but excluding sand cushioning and prolective covering.
70
-
-
... More
Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size exceeding 95 sq mm but not exceeding 185 sq mm direct in ground including excavation, and refilling the trench etc as rquired, but excluding sand cushioning and protective covering.
40
-
-
... More
Laying of one number PILCA/PVC insulated and PVC sheathed/ XLPE
power cable of grade exceeding 1.1 KV but not exceeding 11 KV of size not exceeding 120 sq mm direct in ground including excavation, and cushioning, protective covering and refilling the trench
200
-
-
... More
Erection of C.C. pole upto 11 m in B.B. :-
Erection of RCC/ PCC pole of following length in brick ballast and ramming the foundation, finishing with l50mm thick cement concrete (1:3:6) layer on top with including excavation and refilling etc as required. Above 6.5 metre and upto 8.0 metre
10
-
-
... More
S.I.T.C of floowing rating LED Street lighting luminarie with pressure die cast housing and toughened glass cover (IP 66 protection) in existing pole/pipe for supply voltage 100-270V AC,50Hz. Luninarie shall be confirm to IS: 10322 part-5/ section-3 and sha-ll be complete with all neccssary accessories as required:70/72W LED Street light
12
-
-
... More
S.I.T.C of floowing rating LED Flood lighting luminarie with pressure die cast housing and toughened glass cover (IP 66 protection) in existing pole/pipe for supply voltage 100-270V AC,50Hz. Luminarie shall be confirm to IS:10322 part-5/section-5 and shall be complete with all neccssary accessories as required-150/160W LED Flood light
18
-
-
... More
S.I.T.C of floowing rating reccess/surface mounted LED round/square
shape Down light luminarie with pressure die cast housing for single phase supply voltage. Luminarie shall be confirm to IS:10322 part-5/section-2 or IEC:62722 with all neccssary accessories as required:12W LED Round Down light
223
-
-
... More
S.I.T.C of floowing rating reccess/surface mounted LED round/square
shape Down light luminarie with pressure die cast housing for single phase supply voltage. Luminarie shall be confirm to IS:10322 part-5/section-2 or IEC:62722 with all neccssary accessories as required:15/16W LED Round Down light
168
-
-
... More
S.I.T.C of floowing rating reccess/surface mounted LED round/square
shape Down light luminarie with pressure die cast housing for single phase supply voltage. Luminarie shall be confirm to IS:10322 part-5/section-2 or IEC:62722 with all neccssary accessories as required-18/20W LED Round Down light
256
-
-
... More
S.I.T.C of floowing rating reccess/surface mounted LED round/square
shape Down light luminarie with pressure die cast housing for single phase supply voltage. Luminarie shall be confirm to IS:10322 part-5/section-2 or IEC:62722 with all neccssary accessories as required-2'x2' LED Panel light
378
-
-
... More
S.I.T.C of floowing rating reccess/surface mounted LED round/square
shape Down light luminarie with pressure die cast housing for single phase supply voltage. Luminarie shall be confirm to IS:10322 part-5/section-2 or IEC:62722 with all neccssary accessories as required-30W COB based round LED light with multiple beam angles (36 Degree)
10
-
-
... More
Supply Installation, testing and commissioning of follwing size ceiling fan 3 Blades confirming to13:374,.2019 including wiring the down rods of standard length (upto 30cm) with 1.5 sq.mm. FR PVC insulated, copper wire suitable for 230V 50Hz, single phase supply etc. complete as required-1200mm (48") BLDC 5star rating 32W Ceiling Fan
10
-
-
... More
S.I.T.C of floowing rating surface mounted LED tube light fitting suitable for 230V 50H2, single phase supply etc. complete as required.-20/22W LED Tube light
34
-
-
... More
Supplying of PVC/XLPE insulated PVC sheathed
heavy duty, armoured electrical cable with aluminiumconductor forworking voltage up to and including 1100 volts. (Conforms to IS:1554,part-1):25 sq. mm,3.5 core
120
-
-
... More
Supplying of PVC/XLPE insulated PVC sheathed
heavy duty, armoured electrical cable with aluminiumconductor forworking voltage up to and including 1100 volts. (Conforms to IS:1554,part-1):35 sq. mm,3.5 core
320
-
-
... More
Supplying of PVC/XLPE insulated PVC sheathed
heavy duty, armoured electrical cable with aluminiumconductor forworking voltage up to and including 1100 volts. (Conforms to IS:1554,part-1):150 sq. mm,3.5 core
110
-
-
... More
Supplying of PVC/XLPE insulated PVC sheathed
heavy duty, armoured electrical cable with aluminiumconductor forworking voltage up to and including 1100 volts. (Conforms to IS:1554,part-1):300 sq. mm,3.5 core
350
-
-
... More
Supplying of PVC/XLPE insulated PVC sheathed
heavy duty, armoured electrical cable with aluminiumconductor forworking voltage up to and including 1100 volts. (Conforms to IS:1554,part-1):10 sq. mm,4 core
110
-
-
... More
Supplying of PVC/XLPE insulated PVC sheathed
heavy duty, armoured electrical cable with aluminiumconductor forworking voltage up to and including 1100 volts. (Conforms to IS:1554,part-1):6 sq. mm,4 core
350
-
-
... More
7.0m height Octagonal Hot -dip glavinized pole(BOP-7030) :Supply, installation of 7.0m height OctagonalHot -dip glavinized pole with top dia 70mm, bottom dia 130mm & made of 3mm thick sheet, base plate dimension 200x200x12mm(L X B X T) including suitable sizes of foundation bolt all complete as required.( without arm)
10
-
-
... More
0.5m single arm suitable for 70mm top pole
8
-
-
... More
0.5m double arm suitable for 70mm top pole
2
-
-
... More
Supply of Exhaust metal Fan 230mm(9"): Supply and fitting of 230mm(9"), 230V AC metal exhaust fan in the existing opening including making good the damage, connection testing, commissioning etc as required.
24
-
-
... More
Supply of Wallmounted Fan: Supply of 16"(400mm), 230V AC wall/cabin fan including fixing the bracket, making , connection testing, commissioning etc as required.
402
-
-
... More
Bulk head 9/10 LED Fitting: Supply and fixing of 9/10W LED, surface mounted bulk head PVE water proof housing for indoor/ ourdoor.
6
-
-
... More
Supply of 12mtr. High mast in one section Construction S355 grade as
per BS-EN 10 025 Top Dia 100mm, bottom dia 360mm, plate thickness
3mm, 12side polygon, galvanisation as per BS EN ISO 1461, base plate
dia 520mm, base plate thickness 25mm, GI single spike lighting
protection, maximum wind speed 47m/ s as per IS : 875 (Part-III) with 6 nos foundation bols of PCD 445mm TS 600/ 24mm dia/850 mm long. Luminaries carriage : Material for 40 NB ERW Class B - M.S. Pipe, dia of carriage ring 450mm (ID) with 8 arm, welded,2 sections having carrying capacity upto S luminaries. Trailing Cable : 5 core 2.5sq.mm. PVC flexible copper conductor Winch/Power Tool : Double drum, SWL 350 Itg with 0.75HP 6 pole single speed integral motor Rope : Grade AISI 1304,7 /19 construction, dia 5mm, BLC 1450 x 2 having 2 nos of continues lrope. Aviation obstruction light: twin dome aviation obstruction lights It CO typu as required. (But excluding Feeder Pillar)
1
-
-
... More
Silent type D.G Set of capacity 100 KVA With AMF Panel IS/IEC-60034-
1 IS: 1460 IS: 13018
1
-
-
... More
LED strip light 24volt DC with IP:65 rated in different colours of length
Smtr. and power 5W per mtr. including driver. IS:10322part l/ section 7
12
-
-
... More
SITC of 20 KVA online UPS three phase input and three phase output power system of input Voltage range 110V AC +/- 5% - 300V AC +/- 5%, Frequenry range 40Hz - 60Hz, Power Factor 0.90 @ full load, and
output Voltage range 200V /208/220/230/240V AC, Voltage regulation
+/-1%, Frequency range 50Hz +/- 0.25Hz or 60Hz +/- .30Hz Harmonic
disbortion - 2%" THD (Linear load) : 4% THD (non-liniear load)
efficiency-88/83%
1
-
-
... More
SITC of 100 KVA online UPS three phase input and three phase output power system of input, voltage range 360V/380V / 400V / 485 V AC, freqency range 40Hz - 6o Hz + 10% output Voltage range 415V + 1%, Frcquency range 50Hz + 1%, Power Factor 0.8/3:1, Harmonic distrortion - 2% THD (Linear load) : 5% THD (non-liniear load)
2
-
-
... More
SITC of MS battery rack suitable for 30 to 35 UPS Battery installation
3
-
-
... More
3 core PVC insulated PVC sheathed copper conductor flat submersible cable.
Supplying , Flat flexible submersible cable with ,copper conductor , PVC insulated and PVC sheathed as IS:7098
3 Core 4 Sq mm. Copper wire
260
-
-
... More
SITC of 65 Ah flat type Lead acid battery with 24 month replacement guaranty.IS:1652:1991
32
-
-
... More
Outdoor stand mounted Feeder Panel with 32amp TP&N, MCB incomer, 45amp TP contactor automatic switching of luminaries, power tool control incommer outgoing terminal etc as reqd. (for high mast)
1
-
-
... More
EPR insulated/PVC sheathed copper conductor hailing cable 5core 2.5
sq.mm. (for high mast)
5
-
-
... More
Supply of Winch/ power tool for high mast of single arm
2
-
-
... More
Supplying and drawing following sizes of FRLS PVC insulated
copper conductor, single core cable in the existing surface/
recessed steel/ PVC conduit as required.2 x 1.5 sq. mm
90
-
-
... More
Supplying and drawing following pair 0.5 mm dia FRLS PVC
insulated annealed copper conductor, unarmored telephone
cable in the existing surface/ recessed steel/ PVC conduit as
required.2 Pair
1800
-
-
... More
Supplying and fixing metal box of following sizes (nominal size)
on surface or in recess with suitable size of phenolic laminated
sheet cover in front including painting etc. as required.100 mm X 100 mm X 60 mm deep
619
-
-
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the
existing surface/ recessed Steel/ PVC conduit as required.2 run of cable
56120
-
-
... More
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 2 nos, 3 pin 5/6A modular socket outlet and 2 nos 5/6 A modular switch, connections etc as required.(For light plugs to be used in non residential buildings)
1003
-
-
... More
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.
30
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc.
as required.
-
-
-
... More
300 mm width X 50 mm depth X 1.6 mm thickness
40
-
-
... More
450 mm width X 50 mm depth X 2.0 mm thickness
24
-
-
... More
Supplying and installing following size of perforated Hot Dipped galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc.as required
-
-
-
... More
300 mm width X 50 mm depth X 1.6 mm thickness
4
-
-
... More
450 mm width X 50 mm depth X 2.0 mm thickness
4
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
300 mm width X 50 mm depth X 1.6 mm thickness
4
-
-
... More
450 mm width X 50 mm depth X 2.0 mm thickness
4
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Cross member"(galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required
-
-
-
... More
300 mm width X 50 mm depth X 1.6 mm thickness
2
-
-
... More
450 mm width X 50 mm depth X 2.0 mm thickness
2
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
... More
3½ X 35 sq. mm (32mm)
8
-
-
... More
3½ X 150 sq. mm (50mm)
2
-
-
... More
3½ X 300 sq. mm (70mm)
6
-
-
... More
4 X 10 sq. mm (25mm)
10
-
-
... More
Supplying and making indoor cable end jointing with cast resin compound, including lugs and other jointing materials for following size of 3 core cable XLPE aluminium conductor cable of 11kV grade as required.:3Cx120 sq.mm
2
-
-
... More
Supplying and making outdoor cable end jointing with cast resin compound, including lugs and other jointing materials for following size of 3 core cable XLPE aluminium conductor cable of 11KV grade as required.:3Cx120 sq.mm
2
-
-
... More
Supplying, installation, testing and commissioning of microprocessor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices(including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card,minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications:Two Loop Panel
1
-
-
... More
Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.
290
-
-
... More
Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required.
30
-
-
... More
Supplying, installation, testing & commissioning of addressable phone control module complete as required.
8
-
-
... More
Supplying, installation, testing & commissioning of addressable manual call point complete as required.
8
-
-
... More
Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.
8
-
-
... More
Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required
1
-
-
... More
Supplying, installation, testing & commissioning of 6 inches dia, 2 watts, 70/100 volts ceiling speaker complete as require.
95
-
-
... More
Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms operating at 240 Volt AC Supply complete as required.
4
-
-
... More
Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required
1
-
-
... More
Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required
2100
-
-
... More
Providing and fixing ,testing and commissioning of butterfly valve (PN 1.6) complete with bronze /gun metal srat duty ISI complete with nuts,bolts,washers,gaskets confirming to IS 13095 of following sizes as required:
-
-
-
... More
65 mm diameter
6
-
-
... More
80 mm diameter
4
-
-
... More
100 mm diameter
10
-
-
... More
150 mm diameter
9
-
-
... More
Providing and fixing ,testing and commissioning of doubled flanged sluice valve of rating PN 1.6 with non rising spindle,bronze/gun metal seat,ISI Marked complete with nuts,bolts,washers,gaskets confirming to IS 780 of following sizes as required
-
-
-
... More
150 mm diameter
1
-
-
... More
200 mm diameter
1
-
-
... More
Supplying and fixing orifice plate made out of 6 mmthick stainless steel (Grade 304) with orifice of requiredsize to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2
complete as required.
10
-
-
... More
Providing and fixing ,testing and commissioning of non-return valve of following sizes confirming to IS:5312 complete with rubber gasket,GI bolts,nuts,washers etc as required:
-
-
-
... More
80 mm diameter
1
-
-
... More
100 mm diameter
2
-
-
... More
150 mm diameter
2
-
-
... More
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.
-
-
-
... More
100 mm diameter
1
-
-
... More
200 mm diameter
1
-
-
... More
Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.
4
-
-
... More
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636(type-A) as required :Gun Metal
30
-
-
... More
Providing and fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle confirming to IS 903 Suitalbe for instantaneous connection to interconnect hose pipe coupling as required:Gun metal
15
-
-
... More
Supplying, and fixing of fire brigade connection of cast iron body with gun metal male instantaeous inlet couplings complete with cap and chain as required for suitable dia MS Pipe connection confirming to IS 904 as required : 4 way-150 mm dia M.S Pipe
3
-
-
... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges,tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and
painting with two or more coats of synthetic enamel paint of required shade complete as required :
-
-
-
... More
25 mm diameter
980
-
-
... More
32 mm diameter
290
-
-
... More
40 mm diameter
290
-
-
... More
50 mm diameter
362
-
-
... More
65 mm diameter
212
-
-
... More
80 mm diameter
190
-
-
... More
100 mm diameter
160
-
-
... More
Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required.
-
-
-
... More
200 mm diameter (wall thickness = 6.3 mm)
3
-
-
... More
150 mm diameter
290
-
-
... More
Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required :(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.(b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.(c) M.S. fabricated Common base plate, coupling, coupling guard,foundation bolts etc. as required.(d) Suitable cement concrete foundation duly plastered with anti vibration pads. 2850 lpm at 88 m Head
1
-
-
... More
Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following,complete in all respects, as required : (Diesel Driven Pump)Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft,mechanical seal conforming to IS 1520.Suitable HP, 1500 RPM water cooled with radiator,diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer,instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads.2850 lpm at 88 m Head
1
-
-
... More
Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following,complete in all respects, as required : (Jockey Pump)Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520.Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure,horizontal foot mounted type with Class-'F' insulation,conforming to IS : 325.M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.
Suitable cement concrete foundation duly plastered and with anti vibration pads.180 lpm at 88 m Head
1
-
-
... More
Supply,installation,testing and commissioning of following minimum capacity and external static pressure VRF/VRV ceiling mounted ductable type Indoor unit equipped with washable synthetic mediapre-filter,fan section with low noisefan/dynamically balanced blower,multispeed motor,coil sectionwith DX copper coil,electronic expansion valve,corded remote control,outer cabinet,vibration isolators,drain pan,other necessary supports etc.,suitable for operation on single phase AC supply230V 10%,50Hz complete as required.The unit shall have automatic force shutdown provision in case of fire on receiveing signal from BMS System.Thecooling capacity of indoor unit will be at air inletconditions of 27 Degree C DB and 19 Degree C WB temperature.Low static ductable units (minimum 25 pascal external static pressure)-0.6 TR
1
-
-
... More
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal
15
-
-
... More
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. : 40 m
8
-
-
... More
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.
3
-
-
... More
Providing, fixing, testing & commissioning of 15mm dia
quartzoid bulb type sprinklers of rating 68 degree
centigrade with required accessories : Concealed sprinkler
690
-
-
... More
Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required. : 1500mm
295
-
-
... More
Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia in white finish UL Listed or FM approved complete as required.
650
-
-
... More
Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors,dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :Incomings:400A, 50kA 4 Pole MCCB, Ics=100% Icu Rating Digital Voltmeter 0-500V with selector switch Ammeter (0-400 A) with selector swtich & CTs etc.,LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps,Set of Copper Bus Bar 500Amps,Outgoings( Note : All outgoing feeders for pumps should havedigital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps)Main Fire Pumps:125 Amp, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation,selector switch for local/remote, auto/manual/OFF operation. - 2 sets,Jockey Pump:63 Amp, 50kA TPN MCCB, Ics=100% Icu, with Suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. - 2 sets
1
-
-
... More
Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area by Manual Means
1.54
-
-
... More
Excavation in Soil using Hydraulic Excavator and Tippers with Disposal upto 1000 metres.- Excavation for road work in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and tranporting to the embankment location within all lifts and lead upto 1000 m
61390.02
-
-
... More
Granular Sub-base with Close Graded Material (Table:- 400-1) By Mix in Place Method (Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401) for grading- I Material
1037.07
-
-
... More
Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).
622.3
-
-
... More
Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment).
272.26
-
-
... More
Rough dressing the trenched ground including breaking clods.
1555.75
-
-
... More
Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation
1555.75
-
-
... More
Fine dressing of the ground.
1555.75
-
-
... More
Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
233.36
-
-
... More
Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge
233.36
-
-
... More
Supplying and stacking at site dump manure from approved source, including carriage up to 5 km (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 20 mm
233.36
-
-
... More
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) : Holes 90cm dia, &90cm deep
60
-
-
... More
Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge.
777.88
-
-
... More
Providing & laying Selection no. 1 doob grass turf with earth 50mm to
60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same maintenance for 30 days or more till the grass establish properly,as per direction of officer in charge
777.88
-
-
... More
Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, edge, flower beds, foliages, creepers etc. including hoeing,weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and menure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide,Pesticide, lawn mover and brush cutter with fuel & other T & P material/articles shall be provided by the department.)Permanent office accommodation. (1Mali for 1.25 Acre)
28003.48
-
-
... More
Providing & fixing of White River (Stone) Pebbles size of 2" to 2.50" dia in natural colour at site of work including loading, unloading, carriage and all taxes paid etc.and as per direction of officer in charge.
456
-
-
... More
Anti termite treatment by digging holes 30 cm deep and 4 cm dia, 6 to 7 holes around the tree using chemical emulsion at the rate of 1.5 liter per hole in two time or more application to get the trees free from termite infection chemicals used Chlorpyriphos 20% EC in the ratio of 1% concentration and as per direction of officer-in-charge.
60
-
-
... More
Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in 499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area.(two application) i/c cost of chemical)and as per direction of officer-in-charge.and as per direction of officer-in-charge.
1555.75
-
-
... More
Providing and Displaying Bamboo Buddha Valley with fresh & healthy 5 to 6 suckers 1.80 m to 2.10m ht umbrella type well developed in 50 cm
Cement Pot as per direction of the officer-in-charge.
5
-
-
... More
Providing and Displaying Bismarckia Palm 115 to 180 cm ht., well developed 12 and above good color fresh and healthy leaves in 40 cm Cement Pot as per direction of the officer-in-charge
5
-
-
... More
Providing and Displaying Cycus cirsnallis well developed with fresh &
healthy 35 to 40 lush green leaves in 40 cm Cement Pot as per direction of the officer-in-charge.
5
-
-
... More
Providing and Displaying Cycus revoluta in 35 cm challi, specimen , having 30 to 40 with fresh and healthy, leaves having 25cm to 30cm circumfrance of base stem well developed as per direction of the officer-in-charge.
5
-
-
... More
Providing and Displaying Ficus Long Island topiary well developed with fresh & healthy 5 to 6 ball specific size and shape 120 to 150 cm ht in 40 cm Cement Pot as per direction of the officer-in-charge.
5
-
-
... More
Providing and Displaying Ficus Retusa topiary well developed with fresh & healthy 5 to 6 big ball specific size and shape 180 to 210cm ht in 40 cm
Cement Pot as per direction of the officer-in-charge.
5
-
-
... More
Providing and Displaying Phoenix roebelenii palm well developed having 20 to 25 fresh & healthy leaves 90 to 105 cm ht. in 30 cm Cement Pot as per direction of the officer-in-charge.
5
-
-
... More
Providing and Displaying Ficus Starlight with fresh, healthy and attractive foliage 45 to 60 cm spread 75 to 90 cm ht., specimen bushy ,in 35 cm Cement Pot as per direction of the officer-in-charge.
50
-
-
... More
Providing and Displaying Foxtail palm well developed with fresh & healthy foliage of ht. 210 to 240 cm in big 40 cm Cement Pot as per direction of the officer-in-charge.
5
-
-
... More
Providing and Displaying Topiary of Ficus Nuda well developed with fresh & healthy foliage from Top to Bottom with single piller 75 to 90 cm spread, 195 to 210 cm ht. in 35 cm Cement Tray /Cement Pot as per direction of the officer-in-charge.
10
-
-
... More
Providing and Displaying Topiary of Ficus Panda well developed with fresh & healthy foliage with 3 to 4 Ball and 60 to 75 cm spread each Ball, 135 to 150 cm ht., in 35 cm Cement Tray /Cement Pot as per direction of the officer-in-charge.
5
-
-
... More
Providing and Displaying Travelers palm well developed with fresh & healthy leaves foliage 210 to 240 cm ht specimen in 40 cm Cement Pot as per direction of the officer-in-charge.
10
-
-
... More
Providing and stacking of Alternanthera species of height 15 cm to 20 cm,full of branches and foliage in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.
100
-
-
... More
Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushty shape with fresh and healthy leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge..
100
-
-
... More
Providing and stacking of Iresine herbstii, of height 20-25 cm. full of branches well developed in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.
5000
-
-
... More
Providing and stacking of Ophiopogon jaburan ( variegated ),full of variegated leaves in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge.
100
-
-
... More
Providing and stacking of Tradescantia, full of leaves in Earthen Pot/Plastic Pot of size 15 cm. as per direction of the officer-in-charge
100
-
-
... More
Providing and stacking of Tradescantia zebrina having in 15 cm size of
Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.
50
-
-
... More
Providing and stacking of Wedelia trilobata,full of leaves in 15 cm size of
Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.
50
-
-
... More
Providing and stacking of Ficus benjamina (green) of height 150-165 cm.,
bushy with healthy branches and lush green foliage in big size HDPE bags
as per direction of the officer-in-charge.
50
-
-
... More
Providing and stacking of Ficus blackii (F.vivion) (bushy) of height 150-165 cm. with 8-10 branches and healthy foliage in earthen pots of size 30 cm as per direction of the officer-in-charge.
50
-
-
... More
Providing and stacking of Gardenia jasminoides of height 45-60 cm. with 3-4 branches in earthen pots of size 20 cm as per direction of the
officer-in-charge.
10
-
-
... More
Providing and stacking of Hamelia patens of height 60-75 cm. with 6-8
branches in poly bags of size 25 cm as per direction of the
officer-in-charge.
10
-
-
... More
Providing and stacking of Bougainvillea (Variety Butiana, Lady Mary Baring,Mahara,Mohan,Scarlet Queen, Variegated, Glabra Formosa, Peruviana Odissi, Paratha, Subhra,Thimma, Spectabilis L.N Birla, Refulgens) of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.
50
-
-
... More
Supplying Fitting Fixing all height Wall paneling with 12 mm Ply wood (Green/Optima/Red) over 50 mm x 25 mm aluminum Section, Laminate fininsh with all taxes and royalty all complete as per E/I.
2326.09
-
-
... More
Lift Panel : The panel includes 415V, 100A, 3Ph, 35kA, 50Hz Electrolytic Aluminium Bus Bar (E91EWP) Aluminium, Earth Bus for main supply, removable glands plates, cable glands and sending and receiving ends, including connection with outgoing Feeders complete in all respects. All inter connections shall be made with 2.5 ,4, Sq mm PVC Cu. wire. All incomer MCCB and bus coupler shall be mechanically operated . All 4 pole MCCB with thermomagnetic based release must have following character: Incomer
1 No. 63A/FP/ MCB Bus bar -100A, 16kA AL
Outgoing
40A ,4P, 30mA RCCB- 1 no
40Amps, TPN, MCB -1 no
16 Amps, DP MCB -1 no
16 Amps, DP RCCB -1 no
2
-
-
... More
AC Panel: The panel includes 415V, 100A, 3Ph, 25kA, 50Hz Electrolytic Aluminium Bus Bar (E91EWP) Aluminium, Earth Bus for main supply, removable glands plates, cable glands and sending and receiving ends, including connection with outgoing Feeders complete in all respects. All inter connections shall be made with 2.5 ,4, Sq mm PVC Cu. wire. All incomer MCCB and bus coupler shall be mechanically operated . All 4 pole MCCB with thermomagnetic based release must have following character:
Make : ISG Ranchi/ SPC Electrotech/ Application Control Panel Pvt Ltd/ Electric Point
Incomer
1 No, 800A/FP/35kA/ MCCB thermomagnetic release type, and S/C, O/L protection, with Rotary Handle & Spreader links. 12 No 63A, 10kA, MCB 15 No 40A, 10kA, MCB Electro-mechanical lock for auto changeover -1 set: 63A, 4P
Current transformer 150/5A, 15VA, class 0.5 -3 each -1 set
LED indicators for each phase and ON/OFF/TRIP -2 set
Busbar-
415V, 800 A, 25 kA, 3ph, 4wire AL BUSBAR-1 , extensible
1
-
-
... More
UPS panel :- Supplying, designing, manufacturing, installation, testing and commissioning of LT Panel of 14 SWG CRCA sheet (2 mm) steel , dust and vermin proof with reinforcement of suitable size iron channel , with proper lifting arrangement effecting proper connection of all incomers and outgoing(IP-43) fully compartmentalized cubical type, floor mounted , totally enclosed, extendable on both sides, switch board and suitable for operation on 415V, 50Hz, 3 Ph. AC supply and fault level 50 kA with front operated construction including separate fabrication arrangement for fixing MCCBs and Bus Coupler. The sheet steel under go minimum 7 tanks treatment followed by finishing powder coating of minimum 60 micron thickness duly compartmentalized having accessories mounted inside the cubical panel, earthing with 2 Nos. earth studs. The panel includes 415V, 200A, 3Ph, 25kA, 50Hz Electrolytic Aluminium Bus Bar (E91EWP) Aluminium, Earth Bus for main supply, removable glands plates, cable glands and sending and receiving ends, including connection with outgoing Feeders complete in all respects. All inter connections shall be made with 2.5 4, 6, 10 Sq mm PVC Cu. wire.
All incomer MCCB and bus coupler shall be mechanically operated . All 4 pole MCCB with thermomagnetic based release must have following character:
Icu=100% Ics with adjustable S/C and O/L
Provision for inbuilt earth leakage module & provision for inbuilt measuring unit.
The panel consisting of the followings
2 Nos, 200A/FP/35kA/ MCCB thermomagnetic release type, and S/C, O/L protection, with Rotary Handle & Spreader links. (one as incomer from main panel + one as outging to UPS ) Current transformer 200/5A, 15VA, class 0.5 -3 each -1 set
LED indicators for each phase and ON/OFF/TRIP -2 set
Bus-bar : 415V, 200 A, 25 kA, 3ph, 4wire AL BUSBAR-1 , extensible
Outgoings: MCB TPN 40A- 13 nos
1
-
-
... More
TOTAL AMOUNT FOR SCHEDULE ITEMS (A)
-
-
-
... More
Non -Scheduled item
-
-
-
... More
Supplying of Plastic Black Vertical Hanging Garden Pots of length 500 millimeter of specification:weight of Pot 200 gram,length:500 millimeter,width:400 millimeter,Height:200 millimeter,Set of pots (with Hook):4,weight of frame:125 gram,Packing type:Box as per direction of E/I.
500
-
-
... More
Providing and fixing HEALTH FAUCET of specification:Thickness of Ni-Cr coating-NA,Types of Shower:Hand Shower,:Material-ABS PLASTIC,Inlet Length of Shower Pipe (mm)-100 millimeter Shower Diameter / Length (mm):50,Shower Width (mm):50,Weight of Water Shower in grams (+/- 50 GM) 200gram
32
-
-
... More
Spot Light : Supply, installation and commissioning of pendant light with white powder coated aluminum housing and pressure die-cast heat sink having high efficiency.
56
-
-
... More
Track mounted LED light with modern design, compact size with High power COB LED to provide focus light. Track light is method of lighting where light fixtures are attached anywhere on a continious track rail which is electrically charged as compared to the need of routing ecectrical wiring to individual light position.
38
-
-
... More
Providing & fixing wood wool Acoustic panel 1200 x 600 mm 25 mm thick on GI metal frame of 50 x 25mm making a grid of 610 x 610mm c/c by providing a 50 mm air-gap from wall, the frame work filled with 50mm thick polyfibre 1000 GSM density . Frame is to be backed by chicken mess on top Fire Retardant fabric inserted inside the grippers. Grippers [Centre, Half Wrap & Full Wrap]
407.45
-
-
... More
Supplying Fittng Fixing Double Layered Poly carbonate Sheet in portico on ms fabricated structure.
300.03
-
-
... More
CARPET Providing & fixing 2 ply cut pile polyster carpet 9mm thick backed with 4mm kinni foam and fevical 505
1736.1
-
-
... More
Providing & fixing of Handmade acrylic canvas painting as approved by EIC and architect all complete with fiber accessories as per direction by architect.
864
-
-
... More
Supply of ISI marked 1Cx50 sq mm solid copper conductor XLPE PVC insulated cable as per IS:7098 armoured, served, sheathed, 1.1kV grade. Make:- Polycab
50
-
-
... More
Providing , fixing Carbon Di-oxide Type , Gas Confirming to IS ‘15222’ , Cylinder Confirming to ‘IS 7285’ & PESO approved ,Controllable Discharge Mechanism, Discharge Hose & Horn As per ‘IS 15683’ & ‘IS 2878’ ISI mark Fire Extinguishers (Wheel Type or Squeeze Grip Type). Operating Temperature :- (-)20oC to (+)55oC Suitable for ‘B’ ‘C’ Class of FIRE (4.5 Kg Capacity)
6
-
-
... More
Providing , fixing Dry Chemical Powder (Stored Pressure Type) Mono Ammonium Phosphate 50% powder confirming to ‘IS 14609’ , Nitrogen Pressurized, Controllable Discharge Mechanism, Pressure Gauge, Discharge Hose & Nozzle Epoxy Polyester Powder Coated As per ‘IS 15683’ ISI mark Fire Extinguishers. Operating Temperature: - (-) 20oC to (+) 55oC Suitable for ‘A’ ‘B’ ‘C’ Class of FIRE complete in all respects (4 Kg Capacity)
24
-
-
... More
Providing and fixing 25 mm nominal gun metal gate valve class I with CI wheel of approved quality with union (Screwed end)
22
-
-
... More
Supplying and fixing of hose cabinet of size 450mm x 450mm x 250mm made of 2mm thick M.S. sheet with 6mm thick glazed glass door including necessary locking arrangment suitable to accomodate 1 nos. 15 mtr. long hose pipe, 1 no. branch pipe mounted on wall or raised brick platform and duly painted with post office red externally and white internally with synthetic enamel paint complete in all respect.
15
-
-
... More
Providing and Fixing Direct Mounting Pressure Gauge Assemble with Gate/Ball Valve -Nominal Size of the Dial-40mm,Measurement Range-0-400,Material of case-Stainless Steel-Gr 304,Material of Dial Plate-Aluminium,Material for Window cover-Transpartent Acrylic,Overall Dimension-500mmX500mmX50mm
10
-
-
... More
Providing and Fixing Air release Valve 150 mm Dia AIR RELEASE VALVE Double Ball Type PN - 10 - Flanges as per BS:4504 PN 10 FF (Drilled) 15 Bar Hyd. 10 Bar Hyd.Pattern / Type-Double Ball Type,Pressure Rating / Class-PN-10,Body-Cast Iron,End Connection-Flanged End,SUB CATEGORY-CI Air Release Valve
12
-
-
... More
Providing and Fixing MS Structure support for piping,Size: 20 X 20 X 3 mm,Thickness: 3 mm,Shape: L Shaped,Usage/Application: Construction,Material: Mild Steel,Structure: T angle
650
-
-
... More
Providing , fixing Modular type Fire Extinguishers for electrical rooms (Stored Pressure Type) Mono Ammonium Phosphate 50% powder confirming to ‘IS 14609’ , Nitrogen Pressurized, Controllable Discharge Mechanism, Pressure Gauge, Discharge Hose & Nozzle Epoxy Polyester Powder Coated As per ‘IS 15683’ ISI mark Fire Extinguishers. Operating Temperature: - (-) 10oC to (+) 55oC Suitable for ‘A’ ‘B’ ‘C’ Class of FIRE complete in all respects (5 Kg Capacity)
6
-
-
... More
Fabrication, Supplying, Installation, Testing & Commissioning of electrical control panel of cubical construction, wall mounted type, fabricated out of 2mm. thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection, and accessories mounting and internal wiring, earth terminals, numbering etc. complete in all respects, suitable for operation on 415 V, 3 phase 50 HZ AC supply with enclosure protection class IP 42. For Terrace Pump
1
-
-
... More
500kVA Transformer as per IS:1180 of 2014(Level 2): Supply, fitting, fixing, commissioning and testing of 500 kVA , 11 kV/0.433 kV Sealed , Deta/Star, vector group DYn11, outdoor, Oil Cooled Type ONAN off circuit Star Rating Transformer with copper wound Transformer and civil foundation work along with required size & length of MS channels as per the norms 500 kVA outdoor transformer with all accessories as per IS- 1180 of 2014, air filled cable box suitable for 11kV kV 1 run , 3C 120sqmm XLPE Al. armoured cable for 1.1kV, 2 Run, 3.5Cx300sqmm XLPE Al. armoured cable as required. ( Make:-ABB/Voltam/ GTB/ Kirloskar / Bharat Bijlee/ Indcoil Transformers Pvt ltd)
Apart- from the above standard fittings followings items should be included:-
Capacity- 500 kVA
Installation - outdoor
No. of phase-Three
Voltage 11kV/433V
Vectro Group -DYn11
Duty- Continuous
Tapping in primary-+/- 5% to -10% in 2.5 steps
Insulation class-A
Temp. rise @ 50 Deg. C. Ambient Oil by Thermo Meter :- 50 Degree C. In winding by Resistance :- 55 Degree C.
1
-
-
... More
HT Cable 3Cx120 sqmm(UE):- Supply of ISI marked aluminium cable conductor XLPE PVC insulated cable as per IS:7098 armoured, served, sheathed, 6.6kV (UE)grade
190
-
-
... More
Solar LED Standalone Street Light( 45W LED) with low maintenance lead acid battery for 3 day backup: A LED based solar street lighting system consisting of PV modules, electronics ,lead acid battery, and LED based luminaries all suitably mounted on a 6.0m tubular pole above ground , base plate etc as required included . The battery is charged by electricty generated through the PV module panel (180 i.e 90x2 )during day time and the luminaries provides light from dusk to dawn. Specification of of solar LED Standalone street Light: Poly crystalline silicon solar panels, High lumen LED for max. efficiency with lifetime 50,000 hrs CRI nominal 70. Pressure die cast aluminium IP66 enclosure. Controller to charge batteries & microcontroller for autonomously determination of sunrise & sunset. Specific deep discharge batteries are used to store the energy. Metal battery box to be fitted at 5.0m height , suitable pole
2
-
-
... More
Chemical Earthing : Supply, errection, fitting, fixing, commissioning and testing along with earth cutting, digging, earth refilling for chemical earthing of the building except G.I. Strips (25mmX5mm) Each earth pit has to be tested with earth tester 1000 V/1000 Ohms & the test report has to be submitted by the contractor to the department after certification of the same by the consultant. The above chemical earthing includes the provision of masonary enclosure and HDPE Earth Pit Cover 300mm X 300 mm (Under-floor earth inspection pit) having locking arrangement as earth chamber.The above chemical earthing includes the following items (3 Mtr Earthing) Each chemical earthing shall have following details:- Supply of Pollution free Earthcon Compound 4 bags of 25 Kg each Supply of 17.2 mm dia, 250 micron,molecularly bounded copper coated 3 Mtr long electrode. Tested as per IEC 62561-2. Meets the requirement of IS 3043 & IEC 60364-5-54. Tested for short circuit withstanding capacity. High Tensile strength. (UL Listed).
Supply of Stainless Steel "U" Bolt Clamp
Supply of HDPE Earth Pit Cover for earth chamber (Capacity of 5 ton)
16
-
-
... More
Outdoor Feeder Panel ( for street light): Supplying, designing, manufacturing, installation, testing and commissioning in correct alignment position, effecting proper connection of all incomer and outgoing of outdoor type cubical feeder pillar of suitable size not less than 30 cm and up-to 45 cm deep made out of M.S. sheet 2 mm thick (14 SWG) duly compartmentalized, double door with locking arrangement (IP-54), duly fixed on MS angle iron frame work of suitable size ,earthing with two nos. earth studs, powder coated with rain shed structure etc as reqd. All inter connections shall be made with 2.5, 4 Sq mm PVC Cu. wire. The sheet steel under go minimum 7 tanks treatment followed by finishing of powder coating of minimum 60 micron thickness, duly compartmentalized having accessories mounted inside the cubical panel, earthing with 2 Nos. earth studs Incomer : 1 No. 63A/FP/10kA/ MCB . 0-24hrs Timer switch with bypass arrangement, 40A duty contactor
Outgoings: MCB 40 A, TPN, 10kA-1 no for highmast and MCB 20 A, TPN, 10kA - 6 nos for street light and bollards
100 amp 415 V heavy duty three phase with neutral busbar chamber
1
-
-
... More
CAPACITOR PANEL -200 kVAr
Incomming
6 A MCB, with LED indicators for phase and ON/OFF/TRIP-1 set
315 Amps ,35kA, 500 V MCCB isolator -1 each
Digital Multifuction Meter ( AVF )-1 each
630/5A, Cl- 1 CT for metering 15VA-3 each
A/M Selector Switch-1 each
Off Delay Timer-1 each
8" Fan with filter-1 each
aux contactor -1 each
Busbar
500V,400A,35kA 3PH 4 wire Al. busbar
Outgoing
6 A MCB, with LED indicators for phase and ON/OFF/TRIP-7 set
250A TP MCCB 25kA with Thermal Magnetic Release+ Spreader+ ROH 1 each
160A TP MCCB 25kA with Thermal Magnetic Release+ Spreader+ ROH 2 each
63 A TP MCCB 25kA with Thermal Magnetic Release+ Spreader+ ROH 2 each
40 A TP MCCB 25kA with Thermal Magnetic Release+ Spreader+ ROH 2 each
32 A TP MCB- 1 each
100 kVAr capacitor duty TP contactor -1 each
50 kVAr capacitor duty TP contactor -2 each
25 kVAr capacitor duty TP contactor -1 each
12.5 kVAr capacitor duty TP contactor -2 each
necessary indicators for on/off /hooter and auto/manual switch shall be provided
100 kVAr capacitor -1each
50 kVAr capacitor -2 each
25 kVAr capacitor -1each
12.5 kVAr capacitor -2 each
10 kVAr capacitor -1 each
No load compensation of transformer shall be provided with capacitor
APFCR -8 stage relay with RS485 connectivity
1
-
-
... More
New LT Panel : Supplying, designing, manufacturing, installation, testing, fitting, fixing and commissioning in correct alignment position, effecting proper connection of all incomers and outgoing of LT panel of 14 SWG CRCA Sheet (2mm) steil IP-54 floor mounting cubical type LT Panel suitable for operation on 415V, 50Hz, 3Ph, AC supply and fault level 50kA. Apporexmate size (Shall be given at the time of work order ) with front operated construction including seperate fabrication arrangement for fixing of switchgears and meters. The sheet steel under go minimum seven tanks treatement followed by finishing poder coating of minimum 60 microns thickness duly compart mentalized with locking arrangement duly fixed on base channel of suitable size having accessories mounted inside cubicale panel, earthing with 2 Nos. of earth studs. All opening shall be covered by soft rubber gaskit,enclosure shall be galvanished. Panel shall have suitable cable entry from top and bottom and suitable arrangement for multiruns aluminium cables for MCCB.
The Panel includes 415V, 2000A , 3 ph, 50kA , 50Hz Electrolytic aluminium bus bar( E91EWP) , earth bus with removable glands plates, cable glands and sending and receiving ends, including connection with outgoing feeders complete in all respects. All inter connections shall be made with 4, 6, 10,16 sq. mm PVC cu wire.
The above panel consting of the following:
a) All out going MCCB as per specification.
b) All breaker handlings truck shall be provided by the supplier
Bill of Materials
ACB -MDO type direct action with OL, EF, SC and over and under current protection with microprocessor release. Make-Schneider / Legrand/ L& T/C&S/ Siemens/ ABB
MCCB , make- L&T / Seimens/ Legrand/ABB/C&S
Incomings
1 no-1200A FP ACB MDO type with handle(50kA) for transformer incomer
1 no-250A , FP MCCB(35kA) for DG incomer
Electro-mechnical lock for auto changeover -1 set: 250A, 4P
Outgoings
1 no-800A , FP MCCB(35kA) for AC Panel
1 nos-200A , FP MCCB(35kA) for UPS panel
5 nos-100A , FP MCCB(25kA) for VTPN 1000 amp 415 V heavy duty three phase with neutral bus bar chamber.
300 amp 415 V heavy duty three phase with neutral bus bar chamber.
Analogue type voltmeter - 3 nos , Make :- AUE / Universal / L&T / Esma.- 2 nos
Analogue type Ammetesr . Make :- AUE / Universal / L&T / Esma.- 3 nos
Selector switch for Ammeter- 3 nos
CT 1000/5VA -5 class one Epoxy resin cast CT 3 Set. Make :- Kappa / Matrix / SG Electricals / EPICAST.- 3 nos
LED indicatore (RYB) of 220V. 1 Set of 3 nos Make :- ESSEN / L&T - ESBEE / Binay / Teknik- 9 nos
1
-
-
... More
Supply Installation, Testing & Commissioning of 100% inverter Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 52°C ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. MS/GI powder coated stand with vibration isolation pads. The unit should have refrigerant-cooled PCB for better life of system. OEM should have manufacturing facility in India as per Make-in-India initiative.OEM make 100 % inverter compressor having back pressure mechanism with built in auto refrigerant charging features for extra piping . Unit will have EER more than 6.5 & COP above 3.1 Out Door Unit( Cooling Only )
-
-
-
... More
12HP VRV X
2
-
-
... More
16HP VRV X Each ODU having Double compressor
2
-
-
... More
18HP VRV X Each ODU having Double compressor
9
-
-
... More
20HP VRV X Each ODU having Double compressor
10
-
-
... More
ODU Brezing free Connection Kit
23
-
-
... More
Supply Installation, Testing & Commissioning of 100% inverter Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 52°C ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. MS/GI powder coated stand with vibration isolation pads. The unit should have refrigerant-cooled PCB for better life of system. OEM should have manufacturing facility in India as per Make-in-India initiative.OEM make 100 % inverter compressor having back pressure mechanism with built in auto refrigerant charging features for extra piping . Unit will have EER more than 6.5 & COP above 3.1 VRV Indoor Unit with with VRT Technology( sub cooling from 3deg C to 11deg C), Multistep electronics Expanssion valve & Corded remote.
-
-
-
... More
Ducted Unit - 8.3 TR
12
-
-
... More
Ducted Unit - 6.6 TR
12
-
-
... More
Ducted Unit - 5.5 TR
22
-
-
... More
Ducted Unit - 4.12 TR
11
-
-
... More
Round Flow Cassette unit - 1.65 TR
5
-
-
... More
Wall Mounted Type - 0.8 TR
9
-
-
... More
Supply Installation, Testing & Commissioning of Refnet Joints for Outdoor Units all complete as per direction of Engineer in Charge.
15
-
-
... More
Supply Installation, Testing & Commissioning of VRV Out door Installation with Rubber Pad ,Testing -Flushing with N2 & pre Commissioning without lifting all complete as per direction of Engineer in Charge.Out Door Unit
23
-
-
... More
Supply Indoor Unit Installation,Testing & Commissioning all complete as per direction of Engineer in Charge
-
-
-
... More
Hi-wall Split
9
-
-
... More
Ducted Units
57
-
-
... More
Round Flow Cassette Unit
5
-
-
... More
Supply Installation, Testing & Commissioning of Refringent Gas Charging-R410A all complete as per direction of Engineer in Charge
250
-
-
... More
Hard /Soft drawn copper piping in brazed construction, complete with 19mm/13mm nitrile rubber insulation for VRF Considering Both Pipes
-
-
-
... More
41.3 mm
95
-
-
... More
34.92 mm
115
-
-
... More
28.6 mm
115
-
-
... More
22.2 mm
185
-
-
... More
19.1 mm
140
-
-
... More
15.9 mm
320
-
-
... More
12.7 mm
285
-
-
... More
9.5 mm
350
-
-
... More
6.4 mm
350
-
-
... More
Supply Installation, Testing & Commissioning of Communication Control Cable with PVC Conduit all complete as per direction of Engineer in Charge.2core x 1.5sqmm for VRV
1500
-
-
... More
Supply Installation, Testing & Commissioning of Drain Piping with 6mm nitrile rubber insulation all complete as per direction of Engineer in Charge
-
-
-
... More
25 NB
55
-
-
... More
32 NB
35
-
-
... More
Supply Installation, Testing & Commissioning of GI Sheet all complete as per direction of Engineer in Charge.
-
-
-
... More
24G
450
-
-
... More
22G
200
-
-
... More
20G
25
-
-
... More
Supply Installation, Testing & Commissioning of Duct Thermal Insulation with 9mm thk Closedcell Nitrile rubber all complete as per direction of Engineer in Charge.
500
-
-
... More
Supply Installation, Testing & Commissioning of Duct Acoustic Insulation with 13mm Opencell nitrile rubber all complete as per direction of Engineer in Charge.
200
-
-
... More
Supply Installation, Testing & Commissioning of Al Powder Coated Gril/Diffuser with VCD all complete as per direction of Engineer in Charge.
5.5
-
-
... More
Supply Installation, Testing & Commissioning of Al Powder Coated Gril/Diffuser with out VCD all complete as per direction of Engineer in Charge.
8.5
-
-
... More
Supply Installation, Testing & Commissioning of Canvas Connection all complete as per direction of Engineer in Charge.
57
-
-
... More
Odu lifting, shifting,Civil works all complete as per direction of Engineer in Charge
1
-
-
... More
SITC of Next Gen Firewal cum Unified Threat Management system alongwith following specs ; Hardware Specification
The proposed firewall should not consume more than 1RU Rack-mountable space.
The appliance should have multicore processor based architecture. Firewall should not use a proprietary ASIC hardware for any kind of performance Improvement. If option to disable ASIC is there than OEM must mention the performance numbers in datasheet.
The appliance should have minimum 8 x 10/100/1000 Base T Ethernet Port,4x SFP+ Port, 2 x USB 3.0 port and one Console Port.
The appliance Should have minimum 8GB of RAM &128 GB of more Built in SSD Storage from day1.
General Firewall Features
The Firewall should support BGP,OSPF, RIP v1/v2 routing protocol and IPv4 & IPv6 functionality (Both phase 1 and Phase2).
Solution should support Dead Peer Detection, DHCP Over VPN, IPSec NAT Traversal, Route-based VPN over OSPF, RIP, BGP.
The Firewall solution should support policy based routing, Application based routing and also Multi Path routing.
Should support Zero-Touch registration & provisioning using mobile App.
Proposed solution should have bandwidth quota and time quota for manageability of users.
Solution should support policy based routing, Application based routing and also Multi Path routing.
Performance & Scalability The appliance should have minimum Firewall Throughput of 17 Gbps or better
The appliance should able to handle minimum 110K new session per second or better
The appliance should able to handle minimum 10 Gbps Application inspection Throughput or better
The appliance should have minimum Antivirus/Anti-malware Throughput of 9.5 Gbps or better
The appliance should have minimum IPS Throughput of 10 Gbps or better
The appliance should have minimum Firewall Threat prevention Throughput of 9.5 Gbps or better
The appliance should have minimum IPSec-VPN Throughput of 10 Gbps or better
The appliance should have minimum 4000 Number of Ipsec VPN Peers supported (Site to Site)
The appliance should have minimum 3000 Number of Ipsec VPN Peers supported (Client to Site)
The appliance should have minimum 250 Number of SSL VPN Peers supported (Client to Site)
The appliance should have minimum 4 M Concurrent Session/Concurrent Connection
The appliance should have minimum 5Gbps TLS/SSL inspection throughput & minimum 350K DPI SSL connections.
The appliance Should support 80+ Web categories
The appliance Should support 3000+ application Signature
The appliance Should support 5000+ IPS Signature
The appliance should have minimum 2Million Deep Packet Connection.
Firewall Security Features
The Firewall should scan for threats in both inbound and outbound and intra-zone traffic for malware in files of unlimited length and size across all ports and TCP streams by GAV & Cloud AV.
The proposed firewall should support Bi-directional raw TCP inspection that scans raw TCP streams on any port .
The Firewall must support Proxy-less and non-buffering inspection technology for DPI scanning without introducing file and stream size limitations.
The Firewall should support deep packet SSL to decrypt HTTPS traffic for scanning (IPS, Gateway Antivirus, Content Filtering, Application control) transparently for future requirement and then re-encrypt and send to destination if no threat found.
The firewall must support cloud &appliance based Sandbox technology for integration and OEM must have own appliance based Sandboxing & Advanced Threat Protection solutions.
The cloud or appliance based sandbox should have technology that detects and blocks malware that does not exhibit any malicious behavior and hides its weaponry via encryption. Should detect and block mass-market, zero-day threats and unknown malware. The Firewall should have the capability to block/prevent from Side Channel attacks, memory based attack as well as zeroday malware and Never-before-seen malware attack.
Should support both for analysis of a broad range of file types, either individually or as a group, including executable programs (PE), DLL, PDFs, MS Office documents, archives, JAR, and APK plus multiple operating systems including Windows, Android, Mac OS X and multi-browser environments.
Should have ability to prevent potentially malicious files from entering the network and those files sent to the sandbox for analysis to be held at the gateway until a verdict is determined.
The Firewall should have Pictorial view of a particular access rule, NAT and Routing rule which helps in finding real-time statistics. Displays the rules which are actively used or not being used & enabled or disabled.
The proposed system should have the future option to integrate with cloud-based management & reporting system to manage Firewall. Both solutions should be from the same OEM.
The proposed system should be SD WAN Enable without adding any additional hardware components & Necessary licenses, if required, need to be provisioned from day 1.
The integrated cloud based sandboxing must have capability to scans minimum 10Mb of files size at a time andshould be capable to analysis of 900 or more Files per hour and able to scan 15 or more concurrent files at a time.The proposed Firewall should have ability to prevent potentially malicious files from entering the network and files sent to the cloud based or on-premises sandbox for analysis to be held at the gateway until a verdict is determined.
The Firewall should detect and prevent hidden attacks that leverage cryptography, blocks encrypted malware downloads, ceases the spread of infections, and thwarts command and control (C&C) communications and data exfiltration
License, Certification And Warranty
Warranty - 3 years comprehensive onsite warranty including 24x7 telephone, email and web-based technical support. OEM should have TAC and R&D center in INDIA.
Manufacturer’s warranty should be mentioned minimum 03 (three) years warranty including all services like GAV, IPS, Antispyware or antimalware, CFS, Application control, BoT protection, Advance Threat Protection, Patch & Firmware upgrade and on-prem reporting and analytics software for log analysis.
Bidder must carry out on site installation, testing and commissioning.
OEM should have scored minimum 97% in Exploit Block rate in the last NSS Lab report for NGFW (2019)
The Firewall OEM must be ICSA Lab certified for Network Firewall, Anti-virus and ATD and should have detection rate of 99% or higher.
The proposed appliance should come from firewall appliance family which has ICSA labs certification/NSS/NDP/ Indian Standard IC3S/Common Criteria.
1
-
-
... More
"SITC of Advanced Stackable Gigabit and Multi-gigabit Ethernet supported Fully Manageble True Layer 3 switch with high-performance, scalability,resiliency and security with high-speed flexible uplink. 1RU Chassis with 48 10G SFP+ ports and 6 100G QSFP28 ports. SFP+ ports operate as 1/10GE. QSFP28 ports operate as 100GE/40GE/4x25GE /4x10GE. Front to back cooling. Includes dual AC power supplies,cord,manuals access card and rack mounts.Inclusive of stacking cable The detailsed Specification as follows. Parameters : Minimum specification
Port Density : 48 X 1/10G SFP Ports 6 x 40/100 G QSFP28 Ports
Power Supply : Redundant Hot Swappable Power Supply - AC/DC
Virtual Chassis/ Stacking Option : Upto 6 Switches or more
RAM : 8 GB or better
Flash and Buffer : 32GB or better and 32MB Packet Buffer
Switching Capacity and forwarding Rate 2 Tbps or better and 1600 Mpps or better Latency & MTBF : "Latency: 650 ns MTBF: 384,636 h"
MAC Address : 64K
Routes ""IPv4 - 32k or better
IPv6 - 16k or better"
Quality of Service :Support for Egress rate limiting, Eight egress queues per port, IEEE 802.1Q, 802.3x, DiffServ, Jumbo frame
Protocol Support:IGMP Snooping V1, V2, V3, MLD, PIM-SM/PIM-SSM/PIM-DM/PIM-Bidirectional, DVMRP,RIPv1 & v2,RIPing ,OSPFv3, RIP, BGPv4, MP-BGP,GRE, IS-IS, ITU-T G.8032, IEEE 802.1s, IEEE 802.3ad/802.1AX Link Aggregation Control Protocol (LACP), Ipv4/Ipv6, DHCP Option 82, BPDU, STP Root Guard, SIP detection, SPB-M or MPLS, IEEE 802.1ae, MIB, NTP,Built-in CPU protection against malicious attacks,The Switch Should have 1+N redundant supervisor manager in Virtual chassis with In-Service Software Upgrade (ISSU), VXLAN, ARP Poisioning detection, Policy based routing (PBR),SDN support through Restful API and openflow 1.3.1
Management :SNMP V1,V2,V3, Web GUI, CLI, USB or equivalent memory card, IPv6 management feature on open standards, IEEE802.1ag, TDM or equivalent standards
Security :"Should support Access Control Lists (ACLs), DHCP snooping, IEEE802.1x based port authentication, RADIUS/ TACACS+, SSL, SSH, port mirroring,NTP, IEEE 1588, AES, Syslog, MD5, LLDP-MED, BPDU Blocking, BFD, Unified management, control and
fabric-mesh virtual chassis technology, Autosensing IEEE 802.1X multi- client, multi-VLAN support for bridging and SPBM/VXLAN services,MAC-based authentication for non-IEEE 802.1X hosts, MAC address lockdown, Prevention from ARP attacks"
Resiliency :IEEE802.1q, IEEE802.1d, IEEE802.1s, IEEE802.1w, ITU-T G.8032 ring resilience/ring protection, VRRPv2, Operating Temperature "Temperature: 0 to 45Deg
Humidity: 5% to 95% (non-condensing)"
Safety Certifications: CE, EN 55022, RoHS US UL 60950, CSA22.2 FIPS 140-2, EAL2 & NCPP Certified EN 60825-1/2 Laser
SFP: SFP should be of same make as switch. Vendor to be present in Gartner Magic Quadrant. The Switch shall work with on-premise and cloud based NMS without change in hardware/software/OS Image. The Switch should be EAL2/NDPP certified
2
-
-
... More
"SITC of Advanced Stackable Gigabit and Multi-gigabit Ethernet supported Fully Manageble True Layer 3 switch with high-performance, scalability,resiliency and security with high-speed flexible uplink. 1RU chassis with 24 SFP+ users, 2 SFP+ uplinks or VFL and 2 QSFP28 ports. QSFP28 ports operate as 40/100G-4x10/25G. Front to back cooling. Includes dual AC power supplies, country specific power cord, manuals access card and rack mounts. Inclusive of stacking cable.The detailed Specification as follows. ;
Parameters :Minimum specification
Port Density :26 X 1/10G SFP Ports 2 x 40/100 G QSFP28 Ports
Power Supply :Redundant Hot Swappable Power Supply - AC/DC
Virtual Chassis/ Stacking Option :Upto 6 Switches or more
RAM : 8 GB or better
Flash and Buffer : 32GB or better and 32MB Packet Buffer
Switching Capacity and forwarding Rate 900 Gbps or better and 650 Mpps or better Latency & MTBF "Latency: 650 ns MTBF: 384,636 h"
MAC Address : 64K
Routes "IPv4 - 32k or better
IPv6 - 16k or better"
Quality of Service :Support for Egress rate limiting, Eight egress queues per port, IEEE 802.1Q, 802.3x, DiffServ, Jumbo frame
Protocol Support :IGMP Snooping V1, V2, V3, MLD, PIM-SM/PIM-SSM/PIM-DM/PIM-Bidirectional, DVMRP,RIPv1 & v2,RIPing ,OSPFv3, RIP, BGPv4, MP-BGP,GRE, IS-IS, ITU-T G.8032, IEEE 802.1s, IEEE 802.3ad/802.1AX Link Aggregation Control Protocol (LACP), Ipv4/Ipv6, DHCP Option 82, BPDU, STP Root Guard, SIP detection, SPB-M or MPLS, IEEE 802.1ae, MIB, NTP,Built-in CPU protection against malicious attacks,The Switch Should have 1+N redundant supervisor manager in Virtual chassis with In-Service Software Upgrade (ISSU), VXLAN, ARP Poisioning detection, Policy based routing (PBR),SDN support through Restful API and openflow 1.3.1
Management :SNMP V1,V2,V3, Web GUI, CLI, USB or equivalent memory card, IPv6 management feature on open standards, IEEE802.1ag, TDM or equivalent standards
Security :"Should support Access Control Lists (ACLs), DHCP snooping, IEEE802.1x based port authentication, RADIUS/ TACACS+, SSL, SSH, port mirroring,NTP, IEEE 1588, AES, Syslog, MD5, LLDP-MED, BPDU Blocking, BFD, Unified management, control and
fabric-mesh virtual chassis technology, Autosensing IEEE 802.1X multi- client, multi-VLAN support for bridging and SPBM/VXLAN services,MAC-based authentication for non-IEEE 802.1X hosts, MAC address lockdown, Prevention from ARP attacks"
Resiliency :IEEE802.1q, IEEE802.1d, IEEE802.1s, IEEE802.1w, ITU-T G.8032 ring resilience/ring protection, VRRPv2, Operating Temperature and Humditiy "Temperature: 0 to 45Deg
Humidity: 5% to 95% (non-condensing)"
Safety Certifications :CE, EN 55022, RoHS US UL 60950, CSA22.2 FIPS 140-2, EAL2 & NCPP Certified EN 60825-1/2 Laser
SFP :SFP should be of same make as switch. Vendor to be present in Gartner Magic Quadrant. The Switch shall work with on-premise and cloud based NMS without change in hardware/software/OS Image. The Switch should be EAL2/NDPP certified
2
-
-
... More
"SITC of Layer 2 Fully Manageable Network Switch consists of GigE fixed chassis 48 RJ-45 10/100/1G BaseT, 2 fixed RJ45/SFP combo (1G), 2 fixed SFP+ (1G/10G) uplink/stacking ports. 1RU size, internal AC power supply. Includes country specific power cord, guides, and 19"" rack mount hardware. Inclusive of stacking cable.The detailed Specification as follows. ; "
Parameters :Minimum specification
Port Density :48 X 1G RJ-45 Ports 2 x 1G/10G SFP+ Ports and 2 x 1G SFP/Base-T Combo Ports
Power Supply Internal Power Supply Virtual Chassis/ Stacking Option :Upto 4 Switches or more
RAM : 1 GB or better
Flash :1 GB or better
Switching Capacity and forwarding Rate : 140 Gbps or better and 104 Mpps or better Latency & MTBF :"Latency: 4 µs
MTBF: 832 k hours"
Layer 2 Features :"Mac Address:16K or more
VLAN: 4K or more
System Policies: 1.5K or more
Max Jumbo Frame: 9216 bytes
Multicast Group: up to 1000"
Quality of Service :"Auto QoS for switch management traffic,Policy-based QoS, Traffic Prioritization, Priority Queues: Eight hardware-based
queues per port, SPQ, WRR"
Protocol Support :Static Routing, MSTP, RSTP, PVST+,IPv6 Tunneling, LACP, LAG, IGMPv3, DHCP, DHCP82,DHCP Relay for IPv4/IPv6,Multiple microcode image support with fallback recovery, ARP,SDN support through Restful API and openflow 1.3.1
Management Loopback IP address support for management per service, Policy- and port-based mirroring, Remote port mirroring, sFlow v5 and Remote Monitoring (RMON), Unidirectional Link Detection (UDLD),Digital Diagnostic Monitoring (DDM), LLDP-MED, NTP,MVRP, SNMP, sflow or equivalent
Security :"Dynamic change of authentication (CoA),MAC-based authentication for non-IEEE 802.1X hosts, MAC address lockdown, Prevention from ARP attacks, Web based Authentication, Autosensing IEEE 802.1X multi-client,
multi-VLAN support,RFC 1321 MD5, RFC 2284 PPP EAP,RFC 1826/1827/4303/4305 Encapsulating Payload (ESP) and crypto algorithms, RFC 2104 HMAC Message Authentication, Built-in CPU protection against malicious attacks"
Resiliency :"Unified management, control and virtual chassis technology, Virtual Chassis 1+N redundant supervisor manager, Virtual Chassis In-Service Software Upgrade (ISSU),Smart continuous switching technology, IEEE 802.3ad/802.1AX Link Aggregation
Control Protocol (LACP) and static LAG groups across modules
"
Operating Temperature and Humditiy :"Temperature: 0 to 45Deg
Humidity: 5% to 95% (non-condensing)"
Safety Certifications: CE, EN 55022, RoHS, WEEE US UL 60950, CSA22.2 FIPS 140-2 EN 60825-1/2 Laser, IEC 62368-1
SFP :SFP should be of same make as switch.
Stack Cable :The Switch should be inclusive of required stack cables Vendor to be present in Gartner Magic Quadrant. The Switch shall work with on-premise and cloud based NMS without change in hardware/software/OS Image.
24
-
-
... More
"SITC of Layer 2 Fully Manageable Network Switch consists of GigE fixed chassis 48 RJ-45 10/100/1G BaseT, 2 fixed RJ45/SFP combo (1G), 2 fixed SFP+ (1G/10G) uplink/stacking ports. 1RU size, internal AC power supply. Includes country specific power cord, guides, and 19"" rack mount hardware. Inclusive of stacking cable.The detailed Specification as follows. ; "
Parameters :Minimum specification
Port Density :48 X 1G RJ-45 Ports 2 x 1G/10G SFP+ Ports and 2 x 1G SFP/Base-T Combo Ports
Power Supply Internal Power Supply Virtual Chassis/ Stacking Option :Upto 4 Switches or more
RAM :1 GB or better
Flash :1 GB or better
Switching Capacity and forwarding Rate :140 Gbps or better and 104 Mpps or better Latency & MTBF :"Latency: 4 µs
MTBF: 832 k hours"
Layer 2 Features :"Mac Address:16K or more
VLAN: 4K or more
System Policies: 1.5K or more
Max Jumbo Frame: 9216 bytes
Multicast Group: up to 1000"
Quality of Service :"Auto QoS for switch management traffic,Policy-based QoS, Traffic Prioritization, Priority Queues: Eight hardware-based
queues per port, SPQ, WRR"
Protocol Support :Static Routing, MSTP, RSTP, PVST+,IPv6 Tunneling, LACP, LAG, IGMPv3, DHCP, DHCP82,DHCP Relay for IPv4/IPv6,Multiple microcode image support with fallback recovery, ARP,SDN support through Restful API and openflow 1.3.1
Management Loopback IP address support for management per service, Policy- and port-based mirroring, Remote port mirroring, sFlow v5 and Remote Monitoring (RMON), Unidirectional Link Detection (UDLD),Digital Diagnostic Monitoring (DDM), LLDP-MED, NTP,MVRP, SNMP, sflow or equivalent
Security :"Dynamic change of authentication (CoA),MAC-based authentication for non-IEEE 802.1X hosts, MAC address lockdown, Prevention from ARP attacks, Web based Authentication, Autosensing IEEE 802.1X multi-client,
multi-VLAN support,RFC 1321 MD5, RFC 2284 PPP EAP,RFC 1826/1827/4303/4305 Encapsulating Payload (ESP) and crypto algorithms, RFC 2104 HMAC Message Authentication, Built-in CPU protection against malicious attacks"
Resiliency :"Unified management, control and virtual chassis technology, Virtual Chassis 1+N redundant supervisor manager, Virtual Chassis In-Service Software Upgrade (ISSU),Smart continuous switching technology, IEEE 802.3ad/802.1AX Link Aggregation
Control Protocol (LACP) and static LAG groups across modules
"
Operating Temperature and Humditiy "Temperature: 0 to 45Deg
Humidity: 5% to 95% (non-condensing)"
Safety Certifications :CE, EN 55022, RoHS, WEEE US UL 60950, CSA22.2 FIPS 140-2 EN 60825-1/2 Laser, IEC 62368-1
SFP :SFP should be of same make as switch.
Stack Cable: The Switch should be inclusive of required stack cables Vendor to be present in Gartner Magic Quadrant. The Switch shall work with on-premise and cloud based NMS without change in hardware/software/OS Image.
5
-
-
... More
"SITC of POE+ Layer 2 Fully Manageable Network Switch consists of Fixed 1RU chassis 48 PoE 1G BaseT, 2 fixed RJ45/SFP+ combo (1G/10G), 2 fixed 1G/10G SFP+ uplink/VFL ports. Internal AC PSU (760W budget), includes country specific power cord, guides and 19"" rack mount kit. Inclusive of stacking cable..The detailed Specification as follows. ; "
Parameters Minimum specification
Port Density 48 X 1G RJ-45 PoE+ Ports with 760W power budget. It should support Multigig on minimum 2 Ports out of 48 Ports. 2 x 1G/10G SFP+ Ports and 2 x 1G SFP/Base-T Combo Ports upgradable to 2 x 10G SFP+ Ports. Power Supply Internal Power Supply Virtual Chassis/ Stacking Option Upto 4 Switches or more
RAM 1 GB or better
Flash 1 GB or better
Switching Capacity and forwarding Rate 182 Gbps or better and 135 Mpps or better Latency & MTBF "Latency: 4 µs
MTBF: 789 k hours"
Layer 2 Features "Mac Address:16K or more
VLAN: 4K or more
System Policies: 1.5K or more
Max Jumbo Frame: 9216 bytes
Multicast Group: up to 1000"
Quality of Service "Auto QoS for switch management traffic,Policy-based QoS, Traffic Prioritization, Priority Queues: Eight hardware-based
queues per port, SPQ, WRR"
Protocol Support Static Routing, MSTP, RSTP, PVST+,IPv6 Tunneling, LACP, LAG, IGMPv3, DHCP, DHCP82,DHCP Relay for IPv4/IPv6,Multiple microcode image support with fallback recovery, ARP,SDN support through Restful API and openflow 1.3.1
Management Loopback IP address support for management per service, Policy- and port-based mirroring, Remote port mirroring, sFlow v5 and Remote Monitoring (RMON), Unidirectional Link Detection (UDLD),Digital Diagnostic Monitoring (DDM), LLDP-MED, NTP,MVRP, SNMP, sflow or equivalent
Security "Dynamic change of authentication (CoA),MAC-based authentication for non-IEEE 802.1X hosts, MAC address lockdown, Prevention from ARP attacks, Web based Authentication, Autosensing IEEE 802.1X multi-client,
multi-VLAN support,RFC 1321 MD5, RFC 2284 PPP EAP,RFC 1826/1827/4303/4305 Encapsulating Payload (ESP) and crypto algorithms, RFC 2104 HMAC Message Authentication, Built-in CPU protection against malicious attacks"
Resiliency "Unified management, control and virtual chassis technology, Virtual Chassis 1+N redundant supervisor manager, Virtual Chassis In-Service Software Upgrade (ISSU),Smart continuous switching technology, IEEE 802.3ad/802.1AX Link Aggregation
Control Protocol (LACP) and static LAG groups across modules
"
Operating Temperature and Humditiy "Temperature: 0 to 45Deg
Humidity: 5% to 95% (non-condensing)"
Safety Certifications CE, EN 55022, RoHS, WEEE US UL 60950, CSA22.2 FIPS 140-2 EN 60825-1/2 Laser, IEC 62368-1
SFP SFP should be of same make as switch. Vendor to be present in Gartner Magic Quadrant. The Switch shall work with on-premise and cloud based NMS without change in hardware/software/OS Image.
3
-
-
... More
"SITC of POE+ Layer 2 Fully Manageable Network Switch consists of Fixed 1RU chassis 24 PoE 1G BaseT, 2 fixed RJ45/SFP+ combo (1G/10G), 2 fixed 1G/10G SFP+ uplink/VFL ports. Internal AC PSU (380 budget), includes country specific power cord, guides and 19"" rack mount kit. Inclusive of stacking cable.The detailed Specification as follows. ; "
Parameters :Minimum specification
Port Density :24 X 1G RJ-45 PoE+ Ports with 380W power budget 2 x 1G/10G SFP+ Ports and 2 x 1G SFP/Base-T Combo Ports upgradable to 2 x 10G SFP+ Ports Power Supply : Internal Power Supply Virtual Chassis/ Stacking Option: Upto 4 Switches or more
RAM :1 GB or better
Flash :1 GB or better
Switching Capacity and forwarding Rate: 128 Gbps or better and 68 Mpps or better Latency & MTBF "Latency: 4 µs
MTBF: 1447 k hours"
Layer 2 Features: "Mac Address:16K or more
VLAN: 4K or more
System Policies: 1.5K or more
Max Jumbo Frame: 9216 bytes
Multicast Group: up to 1000"
Quality of Service :"Auto QoS for switch management traffic,Policy-based QoS, Traffic Prioritization, Priority Queues: Eight hardware-based
queues per port, SPQ, WRR"
Protocol Support :Static Routing, MSTP, RSTP, PVST+,IPv6 Tunneling, LACP, LAG, IGMPv3, DHCP, DHCP82,DHCP Relay for IPv4/IPv6,Multiple microcode image support with fallback recovery, ARP,SDN support through Restful API and openflow 1.3.1
Management :Loopback IP address support for management per service, Policy- and port-based mirroring, Remote port mirroring, sFlow v5 and Remote Monitoring (RMON), Unidirectional Link Detection (UDLD),Digital Diagnostic Monitoring (DDM), LLDP-MED, NTP,MVRP, SNMP, sflow or equivalent
Security :"Dynamic change of authentication (CoA),MAC-based authentication for non-IEEE 802.1X hosts, MAC address lockdown, Prevention from ARP attacks, Web based Authentication, Autosensing IEEE 802.1X multi-client,
multi-VLAN support,RFC 1321 MD5, RFC 2284 PPP EAP,RFC 1826/1827/4303/4305 Encapsulating Payload (ESP) and crypto algorithms, RFC 2104 HMAC Message Authentication, Built-in CPU protection against malicious attacks"
Resiliency :"Unified management, control and virtual chassis technology, Virtual Chassis 1+N redundant supervisor manager, Virtual Chassis In-Service Software Upgrade (ISSU),Smart continuous switching technology, IEEE 802.3ad/802.1AX Link Aggregation
Control Protocol (LACP) and static LAG groups across modules
"
Operating Temperature and Humditiy :"Temperature: 0 to 45Deg
Humidity: 5% to 95% (non-condensing)"
Safety Certifications :CE, EN 55022, RoHS, WEEE US UL 60950, CSA22.2 FIPS 140-2 EN 60825-1/2 Laser, IEC 62368-1
SFP :SFP should be of same make as switch.
Stack Cable :The Switch should be inclusive of required stack cables Vendor to be present in Gartner Magic Quadrant. The Switch shall work with on-premise and cloud based NMS without change in hardware/software/OS Image.
5
-
-
... More
"SITC of Wireless Access Point Dual radio 2.4/5Ghz 2x2 802.11ax, omni antenna. 2x 1GE up, 1x RS-232 Console, USB, 48V DC. Inclusive of AP mount.The detailed Specification as follows "
Parameters Minimum Specification
General Parameters Indoor Wireless Access Point - Minimum specification Proposed solution will be Controller less/HW Controller based/SW Controller based but all the Access Points managed centralized . The WLAN solution shall propose an indoor 802.11ax Wifi 6 MU-MIMO indoor dual radio AP Access Point (2.4, 5G) AP to support 2x2:2 on 5 Ghz and 2X2:2 on 2.4 Ghz. Access Point shall offer up to 1200 Mbps throughput on the 5Ghz band (low and high bands) and up to 573 Mbps throughput on the 2.4GHz band. 2 x 10/100/1000Base-T autosensing (RJ-45) port . Both ports should support 802.3at PoE,1x USB 2.0 Type C AP should support ACL, wIPS/wIDS and DPI application, 802.11i, 802.1x Access Point shall propose a Factory reset button. Access Point shall support up to 16 SSIDs (8 per radio) with 512 Clients and should support BLE 5.1/Zigbee Integrated. Single AP can act in dual mode (WLC/Client Serving) with controller to support 256 Access Points in single cluster. Distributed Radio Management, Radio Dynamic Adjustment (RDA), Transmit Power Control @ 18 dBM(TPC), DFS, VHT20,40,80 "It should support Advanced Cellular Coexistence (ACC) i.e Minimizes interference from 3G/4G cellular networks, distributed antenna systems, and commercial
small cell/femtocell equipment" L2 Roaming 802.11r Roaming, 802.11K, 802.11v Operating temperature must be 0°C to 45°C Humidity must be 10% to 90% non-condensing. WFA, UL2043 Plenum rating, EMI,RoHS, REACH, WEEE FCC and CE approval and certificates, The AP shall work with on-premise and cloud based WLC without change in hardware/software/OS Image
60
-
-
... More
"SITC of Wireless Controller along with license for 100 Access Points to be installed on the industry standard Server inclusive of 20 Guest access and 20 BYOD license;The detailed Specification as follows "
Architecture Controller should be appliance or server (physical or virtual) based to support upto 4000 AP or more.The proposed solution should be premise based and not cloud based
Access Control
Authentication and Encryption For this “large deployment” scenario, the WLAN solution shall include a built-in RADIUS server for 802.1x and MAC authentication that shall not be proposed as a separate product.
The built-in RADIUS server shall support at least following EAP types: EAP-PEAP, EAP-GTC, EAP-TLS, EAP-TTLS.
The wireless LAN solution shall support following link layer encryption standards: WPA2_AES, WPA2_TKIP, WPA_AES, WPA_TKIP, DYNAMIC_WEP, WPA_PSK_AES, WPA_PSK_TKIP, WPA_PSK_AES_TKIP, WPA2_PSK_AES, WPA2_PSK_TKIP.
The wireless LAN solution shall support following 802.1x supplicants: Windows 7, 10, MAC OS, IOS, Android, Chromebook
the wireless LAN solution shall propose a “Guest” management solution based on an embedded and built-in Captive Portal providing web based authentication for guests and visitors.
The Guest management solution shall allow non-IT staff (e.g., a receptionist) to create temporary guest accounts.
the WLAN solution shall allow guest self-registration and employee sponsored access.
the Guest management solution shall allow setting a validity period for an authenticated device, in order to avoid entering credentials each time a guest access the network
the WLAN solution shall support BYOD and be able to provide device onboarding that is as simple as possible and without requiring additional thirdparty components
The on-boarding process of employee devices shall be based on employee corporate accounts.
The BYOD application shall allow setting the validity period for the device, and the maximum number of devices per account.
The licensing model of the BYOD application shall be based on the number of on-boarded devices.
Intrusion Detection and Prevention The WLAN solution have wIDS/wIPS capabilities with no additional and dedicated equipment nor additional license.
The WLAN solution shall be able to identify Interfering APs.
The WLAN solution shall be able to identify and contain Rogue APs.
The WLAN solution shall allow the definition of flexible policies to classify an AP as a Rogue AP.
the WLAN solution shall be able to blacklist a WLAN client, either manually or automatically after a client attack has been detected.
the WLAN solution shall allow to configure a blacklist duration.
the WLAN solution shall allow to configure an authentication failure times threshold.
RF Management The WLAN solution shall allow automatic and/or manual RF management (channel and power).
The WLAN solution shall support Short Guard Interval.
If no band/channel (2.4GHz/5GHz) is overloaded (high medium utilization) or crowded (high client count), an AP shall by default guide a new client to the 5GHz band.
Even if the 5GHz band is not overloaded but is crowded (high client count), an AP shall guide a new client to the 2.4GHz band.
If all bands/channels (2.4GHz/5GHz) are overloaded (high medium utilization) and the 5GHz is crowded, an AP shall guide a new client to the 2.4GHz band.
When a new client discovers multiple APs to associate to, the new client shall be guided to the AP that has the fewest associated clients, thus allowing smart/dynamic load balancing.
The WLAN solution shall deny connection to an AP when the signal of the client becomes too weak and disconnect a client when the signal becomes too weak.
The WLAN solution shall propose APs that have the ability to scan the air in order to provide interfering/rogue APs and wireless attacks detection, and shall not rely on dedicated scanning equipment.
The scanning function of the APs shall not impact active voice or video calls (SIP and H.323).
Mobility & LBS The WLAN solution shall support both Opportunistic Key Caching (802.11k).
The WLAN solution shall comply to the 802.11r standard.
the centralized management function shall allow to display the Wi-Fi coverage quality within a given area (“Heat Map”).
1
-
-
... More
"SITC of Network managent solution in virtual mode on industry standard Server with AI ops monitoring tool. ; "GENERAL
A Solution that shall include a client/server Network Management System that is WEB 2.0 based, providing a WEB GUI for different types of PCs, tablets and smartphones.
The NMS shall offer a single and consolidated interface for network deployment, troubleshooting, performance analysis and configuration operations.
The NMS shall offer northbound interface RESTful APIs for application interoperability
The NMS shall allow real-time monitoring and analysis of critical network performance indicators through visual and customizable widgets
The proposed solution should be premise based and should support seamless migration to cloud without change in hardware/firmware of the switch. This should be based on standard server (Physical/Virtual)
The centralized management function shall allow to display the physical topology of the network.
The centralized management function shall be able to handle wired equipment (switches) and wireless (Acces Point) management for a “unified management” approach.
The solution shall be able to automatically discover new Switch or APs added to the network.
The solution shall be able to blacklist a client, either manually or automatically after a client attack has been detected.
The centralized management function shall allow per equipment configuration and software backup and restore, and bulk backup and restore.
TOPOLOGY
The NMS shall build and present a visual topology for both logical and physical infrastructure with actual neighbor linkage info (IP subnet, layer 2, LLDP adjacency protocols) and live device status
The NMS shall present logical maps based on user-defined filters (IP subnet, location…).
NOTIFICATION MANAGER
The NMS shall allow monitoring and analyzing alerts, notifications and network performance from network equipment from any vendor
The NMS shall offer advanced alert capabilities through customizable filtering and sorting capabilities.
The NMS shall allow remediation and notifications actions based on predefined conditions with a single click
LOCATOR
The NMS shall be able to locate devices in the network based on MAC address or IP Address, irrespective whether the device is located on a fixed or wireless network.
RESSOURCE MANAGER
The NMS shall allow mass programmable equipment configuration by the mean of scripts.
The NMS shall allow infrastructure-wide software image update for baseline version management
UNIFIED ACCESS The NMS shall offer a unified user interface for wired and wireless role profiles for user based access
The NMS shall offer a wired and wireless cohesive authentication configuration and end-user profile definition for appropriate network access rights and dynamic policies
ADDATIONAL FEATURES
The centralized management function shall allow access to all wIPS/wIDS features.
The centralized management function shall offer, on the basis of an application signature file, insight at application layer (e.g. facebook.com, youtube.com, salesforce.com…) even if the applications run on top of the HTTP or HTTPs protocols. It shall also allow control of those applications.
The solution should allow the admin to easily provision, manage and maintain a network infrastructure with alarms, unified access security policies
The solution should provide full visibility into wireless, devices and applications, as well as predictive analysis for forward planning
The management solution should act as comprehensive tools for infrastructure configuration, monitoring, security, device configuration, alert management, to accelerate, downtime resolution, and overall management.
It should be web based interface with customizable dash board
Provide details about problematic devices including temperature, memory etc
Monitor network bandwidth and end device traffic pattern
Provide top applications/users usage analytics real time and historical
Port utilisation details and threshhold limits
Provides threat mitigation through a secure perimeter against intrusion and malware attacks
Should support third party network devices for basic SNMP and report
1
-
-
... More
SITC 40 Gigabit optical transceiver QSFP. Supports monomode fiber over 1310nm wavelength nominal) with an LC connector.
4
-
-
... More
SITC 10 Gigabit optical transceiver SFP+). Supports monomode fiber over 1310nm wavelength nominal) with an LC connector.
36
-
-
... More
SITC of Tower Server with Windows Essentials 2022
server Having Configuration:-Intel Xeon E-2314 Processor 2.8GHz,8M Cache,4C/4T,Turbo,65W,TPM,4 DIMMS,
2 x 16GB UDIMM=32GB,Upto 4, 3.5" SATA Drives,
2TB Hard Drive SATA 6Gbps Enterprise 7.2K 512n 3.5in Cabled,Single Power Supply, 300W, Onboard* + Dual Gigabit Ethernet onboard + 1 dedicated management port, iDRAC Basic, 3YR Pro Support Next Business Day Onsite,
1
-
-
... More
6 Port LIU Switch : SITC of 6 Port Loaded LIU with SC Unit for 6 SM fiber Single Mode fibres OS2 (1 Nos. of Loaded Duplex adapter with Adapter plate) along with 1 Pc of Splice Tray - 6 Fiber Capacity & 6 Nos. of SC Pigtail - Pigtail 1 Meter SM Os2 (Make:Legrand/Panduit/RIT/Siemon)
Detailed Specs for Fiber Optic LIU Rack Mount LIU (6 Ports) Fiber optic patch panel : Fiber optic patch panel FMS Termination Drawer should have sufficient slots to accommodate 3 of 12/16 Port LC Adaptor Plates.
Should have Slide type drawer structure Height: 1 U, 1.75 inches (12 & 24 Ports)
Material: Cold Rolled Steel in surface coated by electrostatic epoxy powder
Slots: FMS should have sufficient slots to accommodate adaptor plates
Empty Slots of FMS should be covered with blank plates.
Splice Tray : Splice Tray of ABS, Comply with UL 94V2 material should be supplied with LIU.
Detailed Specs for 6/12/16 Port LC/SC Type Adaptor Plates (SM OS2)
The adaptor plate should be pre-loaded with LC/SC Type Single ModeDuplex Adaptors.
Port Density :6/12/16 LC/SC Single mode Ports
All LC adapters should be duplex type with shutter for protection. Adapters should be snap mount for easy insertion and removal.
Insertion Loss: 0.2 to 0.1 dB
Compliance :RoHS Compliant
Detailed Specs for LC Type 9/125μm SM Fiber Optic Simplex Pigtail
Type : 9/125 micron fibre performance
Jacket Material : LSZH complying to IEC 61034-1 & 2,IEC-60332-1, IEC-60754-1 & 2
Operating Temperature: -40°C to +75°C
Connector Insertion Loss: 0.30dB(Max)
Attenuation: 1310/1550 : 0.36/0.22 dB/KM
8
-
-
... More
24 Port LIU Switch : SITC of 24 Port Loaded LIU with SC Unit for 24 SM fiber Single Mode fibres SM OS2 (12 Nos. of Loaded Duplex adapter with Adapter plate) along with 1 Pc of Splice Tray - 24 Fiber Capacity & 24 Nos. of SC Pigtail - Pigtail 1 Meter SM
3
-
-
... More
SITC of Fiber Duplex Patch Cords SC-LC SM Patch Cord 2 mtr. (Make:Legrand/Panduit/RIT/Siemon)
Detailed Specs for Patch Cord, LC SC, Duplex, MM OM3, Bend Insensitive G651, PC, LSZH
Cable : LC/SC-SC/LC 9/125μm or 1310 μm SM Duplex Patch Cord Length : 2mtrs (as per requirement)
Connectors : The optical fiber patch leads shall comprise of Single Mode 9/125μm or 1310 μm fiber with 2XLC type fiber connectors terminated at one end of fiber patch cord and 2xSC type connector at other end of the fiber patch cord
Insertion loss should be better than ≤ 0.30 dB
Jacket Material : LSZH complying to IEC 61034-1 & 2,IEC-60332-1, IEC-60754-1 & 2
Attenuation: 50/1300 : 3.0/1.0 dB/KM
Connector Loss : 0.30dB(max)
Operating Temperature : -40°C to +75°C
40
-
-
... More
Supply and laying of 6 core Single mode OS2 Loose tube Armoured Optical fiber cable through existing conduit: The Fiber should be OS2 Single Mode Optical Fiber Cable of Size 9/125µm. Detailed Specs for Outdoor F/O Cable, Loose Tube, SM – 1x6 Fibers, Central Steel rod with CST, PE
The fiber should be optimized for operation at 1310 nm and at 1550 nm.
Should fulfill the requirements of ISO.IEC 11801 - 2nd Edition, type OS2, ITU-T REC G 652D spec IEC 60794-1-2 F5
Fibre Count : 6 /12
Fiber count per tube :6 / 12
Filler count :4
Filler Material : PP
Max. Attenuation: At 1310 nm = 0.36 dB/km, At 1550 nm =0.22 dB/km
Fibre/Tube Identification : Multi Tube
Fibre protection (Tubes) : Polybutylene Terephthalate (PBT)
Armouring : CST
Thickness : 1.6mm
Outer Sheath :UV Stabilised Polyethylene (PE)
Central Strength Member: Steel wire coated with PE
Water Blocking : Thixotropic Gel (Tube);
Petroleum Jelly (Interstices)
Cable Diameter (D) : 9.0 ± 0.5 mm
Mass (Nominal) : 91 kg/km
Min. Bending Radius (during Installation) : 20 D;D-Outer Diameter
Max. Tensile Strength-Short Term : 1500N
Max. Crush Resistance-Short Term : 2200N/100 mm
Operating Temperature range : -40°C to +70°C
500
-
-
... More
SITC of Fully Loaded 24 port UTP jack panel (24 port RJ-45 Loaded CAT-6 UTP 19" rackmountable patch panel preferbaly with 6 blocks). (Make:Legrand/Panduit/RIT/Siemon)
Detailed Specs for 19" 1U 24 port unsheilded Patch Panel Patch panel should be modular design, populates up to 24 UTP keystone-type jacks in 1U
Patch panel should be Enhanced with cable strain relief with retention tray; It should be single metal both front panel and rear tray
Material: sub-rack made of MS Steel with dimension 44.4 mm : 482.6 mm : 105 mm (h:w:d) tray
Information Outlet or connectin module should comply with the specification mentioned above in 2
Standard : Conforms to IEC-60603-7 (603-7) for keystone-type, snap-on apertures
Should be RoHS complied
63
-
-
... More
SITC of Straight LAN Patch Chord-2 Mtr (Make:Legrand/Panduit/RIT/Siemon)
Detailed Specs for Patch Cord, U/UTP 4P, Cat.6, length 2 Metre
Standardization: Compliant with Cat.6, Class E requirements: ISO/IEC 11801 2nd Edition Compliant with Cat.6 component standards IEC 60603-7-4 and 60603-7-5 Cable shield: U/UTP
Number of conductors : 8
Stranding: 7 x 0.20 mm (24 AWG)
Cable jacket characteristics: cable, metal-free
Cable overall diameter: 6.5±0.2 mm
Tube / Wire type: stranded conductor
Insulation: solid polyolefin, 0.97±0.02 mm diameter
Plug: Feature cable retension, with enhanced pull strength.
Cat 6 patch cord plug to have round cable holder and strain relief boot to avoid bending.
Jacket: PVC with 8 different color options
Plug should have high repeatability cross talk performance
1150
-
-
... More
SITC of Straight LAN Patch Chord-1 Mtr (Make:Legrand/Panduit/RIT/Siemon)
Detailed Specs for Patch Cord, U/UTP 4P, Cat.6, length 1 Metre
Standardization: Compliant with Cat.6, Class E requirements: ISO/IEC 11801 2nd Edition Compliant with Cat.6 component standards IEC 60603-7-4 and 60603-7-5 Cable shield: U/UTP
Number of conductors : 8
Stranding: 7 x 0.20 mm (24 AWG)
Cable jacket characteristics: cable, metal-free
Cable overall diameter: 6.5±0.2 mm
Tube / Wire type: stranded conductor
Insulation: solid polyolefin, 0.97±0.02 mm diameter
Plug: Feature cable retension, with enhanced pull strength.
Cat 6 patch cord plug to have round cable holder and strain relief boot to avoid bending.
Jacket: PVC with 8 different color options
Plug should have high repeatability cross talk performance
1250
-
-
... More
Supplying, delivery, installation, testing and commissioning of Flush mounted Cat 6 Information Single Outlet Box.on GI concealed Modular Switch Board including connections and making good the damages caused complete as required & as per Direction of Engineer-In-Charge.
Detailed Specs for Faceplate
Should be UK style Keystone-type Faceplates are available in 1, 2 & 4 port configurations
Should be featured with shutter options, the screws not to be visible
Should support Work with both Flush and Wall mount box
Should support Operating Temperature: -10～+60; Storage Temperature: -40～+68; Humidity: 15%~90% RH
Material: ABS, UL 94V-0; Spring: SUS304; Surface Finish: Polished Detailed Specs for Cat 6 UTP RJ 45 Keystone Jack
RJ45 Jack of Category 6, for the establishing of transmission channels of class E with up to 4 plugged connections, complies with Category 6 requirements of the standards ISO/IEC 11801:2nd edition, EN 50173-1, DIN EN 50173-1: 2002 as well as ANSI/TIA/EIA 568-B.2-1, de-embedded tested in acc. with IEC 60603-7 (603-7), interoperable and backwards compatible with Cat.5e and Cat.5.
Suitable for 10GBase-T applications in acc. with IEEE 802.3an up to 500 MHz and 55 m.
Compatible with RJ standard plugs (RJ11, RJ12, RJ45), PCB- and tool based connection of installation cables AWG 24 – 22 (0.5 mm – 0.65 mm) and flexible cables AWG 26/7 – AWG 22/7.
IDC termination should feature nil crossover in acc. with EIA/TIA 568-A/B, gold-plated bronze contacts for 750 mating cycles, 200 insertion cycle
Material: RoHS complied
Housing material: Polycarbonate (UL-94-V0)
Should be available with or without dust protection feature
Should be 3P certified
1110
-
-
... More
Splicing of Armoured SM/MM Fibre Optics Cable: Splicing, testing and commissioning of supplied, OFC cable of 6-Core Armoured Fibre Optics
120
-
-
... More
SITC of Fully Loaded 15U 19" 600*600 Wall Mounted Rack with all required accessories -2 Nos. of Fan,16A 6 Plug PDU-1 Nos. ,Cable Manager-2 Nos., Mounting Screws-20 Pcs ; The Front frame should be integrated with top, bottom, front and two side panels for better rigidity and strength, Front Glass Door with Lock loaded, Compliance with standards shall be UL 2416., DIN 41494, IEC EN 60529, IEC EN 62262 , IEC EN 60068-2-11 , ISO 9001:2008
1
-
-
... More
Providing, fixing, fitting, installation and testing of 27 U Network Rack as server cabinet 19" LCS2 along with all standard accessories, 800mm (W), 800 mm (D), CRCA 'D' grade 1.6mm thick sheet, pwoder coated for cabinet , 4mm Toughened Tinted Glass Door and along with following accessories:- 1. Cooling fan 220/230V AC, of 90 CFM-- 4 Nos. , 2. Cable manager Metal 4 Nos. 3. PDU- 230V /AC 1 No., 6. Mounting Hardware (20 Sets of M-6 screws, washers, cage, nuts (Nickle Coated)- 3 Nos. ,7. Earthing strips copper 150mm H 1 No. 8. Door Lock 1 No. ,9. Caster Wheels (with breake) 2 Nos. 10. Caster Wheels (without breake) 2 Nos. ,11. Front Metal Band 1 No.
5
-
-
... More
Providing, fixing, fitting, installation and testing of 42 U Network Rack as server cabinet 19" LCS2 along with all standard accessories, 800mm (W), 1000mm (D), CRCA 'D' grade 1.6mm thick sheet, pwoder coated for cabinet , 4mm Toughened Tinted Glass Door and along with following accessories:- 1. Cooling fan 220/230V AC, of 90 CFM-- 4 Nos. , 2. Cable manager Metal 4 Nos. 3. PDU- 230V /AC 1 No., 6. Mounting Hardware (20 Sets of M-6 screws, washers, cage, nuts (Nickle Coated)- 3 Nos. ,7. Earthing strips copper 150mm H 1 No. 8. Door Lock 1 No. ,9. Caster Wheels (with breake) 2 Nos. 10. Caster Wheels (without breake) 2 Nos. ,11. Front Metal Band 1 No.
4
-
-
... More
SITC of IPABX SYSTEM: IP based 100% non-blocking EPABX System should be a IP Compatible with rich feature set of the system and can be connected with pure Voice over IP (VoIP) communication network across corporate Local and Wide Area Networks (LAN and WAN) as & when required. The system should be rack mountable. Must Support Unified Communications. It should have latest TEC Approval (TEC: 60030:2016) vide TEC CERTIFICATE GR NO.TEC/GR/SW/PBX/-005/01/SEP-16 FOR IP- PABX or latest.The offered IPPBX system shall be enabled with Unified Communication and Collaboration Application. IP-PBX should employ IP at Core as Switching Technology employing Packet Switching conforming to latest ITU-T (earlier CCITT) standards.9. The single IP EPABX system should have a provision of future expandability to 2500 ports (any mix/percentage of analog/digital/IP).Infuture If required, the same system should be capable to upgrade as Server- Gateway Architecture support and all Existing Hardware should be used with Expansion support of 32000 Ports. Conference management should be done through web interface Equipped with Equipped with 48 Analog Extensions expandable upto 600 Ports,8 Analog Trunk Ports, 1 PRI , 02 Ports Auto Attendant,8 IP Phones Ports License , 1 Operter COnsole with 24 Keys .
1
-
-
... More
SITC of Analog Basic Push Button Single line CLI Based telephone- Make: Panasonic/ BPL/Beetel
40
-
-
... More
SITC of SIP Based phone with follwing Specifications- • SIP phone should be from the same OEM of IP telephony system. SIP • Two SIP accounts
• 128x48 LCD with backlight
• 2 Line Keys with LED Indicator
• Full-duplex hands-free speakerphone
• HD voice: HD handset, HD speaker
• One touch speed dialling.
• Hands free operation.
• Ring volume control.
• Speaker volume control.
• Should have Headset Jack
• Message waiting indication LED.
• Call Log - Missed Call, Called & Dial Number Details atleast 100 No's
• Should support alternate server discovery in case the primary server fails.
• Should support Local & Remote phone book, Should support LDAP
• Should have an integrated 2-port 10/100 T Ethernet ports switch so as to allow connection of a PC directly to it and no separate cabling should be required for this. Should support IPv4 & IPv6
• Static/DHCP/PPPoE
• G.711,G.722, G.723, G.726, 729, iLBC, Opus
• SIP v1 (RFC2543), v2 (RFC3261), SRTP/ HTTPS/ TLS, 802.1x, Transport Layer Security (TLS)
• DTMF: In-Band, RFC2833, SIP Info
• It should have PoE 802.3af class 2. • Must be of OEM make Only as of IPPBX . Details of Make & Model to be furnished.; Make: Tadiran/Syntel/Alcatel
4
-
-
... More
SITC of Telephone Tag Block): IP-65( weather proof). 100 pair krone Box fully loaded without IPM all complete as per direction of E/I.
1
-
-
... More
Supplying, delivery, installation, testing and commissioning of Flush mounted Cat 5e Information Single Outlet Box.on GI concealed Modular Switch Board including connections and making good the damages caused complete as required & as per Direction of Engineer-In-Charge.
40
-
-
... More
SITC of 200 AH SMF Battery, with 24 months replacement
Battery nominal voltage 432V (216 Cells) to 480V (240 Cells) Minimum VAH for Each UPS Minimum VAH should be 96000 for individual UPS with backup of 30Min
Alternative backup power technologies Should be compaitaible with Lithium-ion batteries for future enhancement
Advanced Battery Management: "1. Battery recharge: After recharging batteries to full capacity, the charger will enter the rest mode to increase the battery lifetime according the ABM cycle. Hence, continuous float charging of the battery shall not be required if the ABM feature is selected. The active battery charger states are constant-current (charge mode), constant-voltage (float mode) and no-charge (rest mode). The ABM feature is user (or service) selectable. If ABM is not utilised, the UPS operates as a conventional float charger.
2. Battery Runtime Monitoring: UPS shall monitor batteries and provide status to end user of battery remaining capacity via front panel icon, remote communications, or both. Runtime calculations to be based on load demand and analysis of battery health.
3. Battery Health Monitoring: UPS shall periodically test and monitor battery health and provide warnings visually, audibly and/or remotely when battery capacity falls below 80% of original capacity. Battery testing may also be user initiated via front panel or serial communications."
80
-
-
... More
SITC of Parallal Redundant Kit for 100 KVA UPS. It should be from the SAME OEM as of UPS
2
-
-
... More
Supply, fitting, fixing, commissioning and testing of 50 Sq. MM Copper Conductor Multi strand PVC Sheilded FRLS Wire with suitable Copper LUGS for Battery Interconnection and suitable 70 Sq. mm copper wire of 4 length of 10 mtrs each for UPS to Battery excluding cable from PANEL to UPS and UPS to panel.
2
-
-
... More
Chemical Earthing
Supply, errection, fitting, fixing, commissioning and testing along with earth cutting, digging, earth refilling for chemical earthing of the building except G.I. Strips (25mmX5mm) Each earth pit has to be tested with earth tester 1000 V/1000 Ohms & the test report has to be submitted by the contractor to the department after certification of the same by the consultant. The above chemical earthing includes the provision of masonary enclosure and HDPE Earth Pit Cover 300mm X 300 mm (Under-floor earth inspection pit) having locking arrangement as earth chamber.The above chemical earthing includes the following items (3 Mtr Earthing) Each chemical earthing shall have following details:- Supply of Pollution free Earthcon Compound 4 bags of 25 Kg each Supply of 17.2 mm dia, 250 micron,molecularly bounded copper coated 3 Mtr long electrode. Tested as per IEC 62561-2. Meets the requirement of IS 3043 & IEC 60364-5-54. Tested for short circuit withstanding capacity. High Tensile strength. (UL Listed).
Supply of Stainless Steel "U" Bolt Clamp
Supply of HDPE Earth Pit Cover for earth chamber (Capacity of 5 ton)
6
-
-
... More
SITC of Corded Digital Deligates Units Gooseneck microphone with programmable switch . With Specifications such as: Frequency response:200 Hz to 12.5 kHz. -Headphones load impedance: 32 ohms 1k ohm, -Loudspeaker nominal output:72 dB SPL, - Length of microphone :480 mm (18.9 in), - Plug and play functionality for ensuring fast installation and reconfiguration times , Immunity to mobile phone interference and with Features such as: Possible-to-speak indication, Request‑to‑speak indication, Built-in loudspeaker with volume control, Built‑in 3.5 mm (0.14 in) stereo headphones socket, Built‑in volume control for headphones, Color-coded LED indicator above microphone button, for showing the following states: microphone on, request‑to‑speak, and possible‑to‑speak, Immunity to mobile phone interference
24
-
-
... More
SITC of Corded Digital Chairman Unit Gooseneck microphone with programmable switch With Specifications such as: Frequency response:200 Hz to 12.5 kHz. -Headphones load impedance: 32 ohms 1k ohm, -Loudspeaker nominal output:72 dB SPL, - Length of microphone :480 mm (18.9 in), - Plug and play functionality for ensuring fast installation and reconfiguration times Immunity to mobile phone interference and with Features such as: Possible-to-speak indication, Request‑to‑speak indication, Built-in loudspeaker with volume control, Built‑in 3.5 mm (0.14 in) stereo headphones socket, Built‑in volume control for headphones, Color-coded LED indicator above microphone button, for showing the following states: microphone on, request‑to‑speak, and possible‑to‑speak, Chaiman Button;
1
-
-
... More
SITC of Digital central conference controller with Built‑in MP3 recorder with internal memory and USB recording, Built‑in Digital Acoustic Feedback Suppression, Quick and easy connection upto 80 discussion devices, Native support for automatic HD camera control, Signal to noice : 94 dBA, Frequency response for input :30 Hz to 20 kHz, Recording/ Playback (bit rate):64, 96, 128, 256 Kbit/sec, Nominal loudspeaker output:72 dB SPL and Functions such as: Plug-and-play functionality, Web browser control, Open microphone control, Built-in MP3 recorder, Discussion control
1
-
-
... More
Supply, Installation, Testing and Commissioning of Networkable Digital Signal Processor having min 8 AEC Inputs and 04 Outputs with IP/RS-232 Control ort; having integrated digital bus/network for expansion of inputs and output ports. The processor shall have programmable DSP like compressor, limiters, EQ, duckers, feedback control, Sampling Rate 48kHz or better,
A/D-D/A Converters- 32-bit or better, Phantom Power +48VDC , etc. complete with standard accessories complete as required with following Compliance CE, FCC Part 15B, Industry Canada ICES-003:7, Intertek ETL (US, CA), RoHS, REACH.
1
-
-
... More
SITC of wall mounted cabinet speaker 30 Watt includes mounting system Dual 4" 2‑Way Surface-Mount Loudspeaker,Compact full range,Ideal for Conference Halls, patios, and retail,Vented LF enclosure,1-inch titanium diaphragm HF driver with neodymium magnetic structure,Coherent Coverage Waveguide,Full-bandwidth overload protection (LF and HF),Elliptical weather-resistant ABS enclosure,Paintable black or white finish,Magnetically shielded for video applications,Strong-Arm Mount™ for easy, flexible aiming,"T" version for 70 or 100 V distributed systems with specifications of Frequency Range (-10 dB)- 65 Hz – 20 kHz, Sensitivity (SPL, 1 W/1 m)- 89 dB,Max. SPL/1m (calc.)- 113 dB,Power Handling (Continuous, Peak)- 200 W, Prog /400 W,Transformer taps(transformer version only)- 70 V: 3.75 W,70 V/100 V: 7.5, 15, 30 W, Coverage, H x V- 100° x 90°, LF Transducer-Two 4", HF Transducer -1", Nominal impedance-(non-transformer version)- 8 Ω, ;
4
-
-
... More
SITC of Power Amplifier Dual 250 W/CH Power Amplifier,Efficient performance for low impedance or distributed systems ,Ideal for sound reinforcement, paging, and life safety ,250 W per channel for 4 Ω or 70/100 V lines,Bridged mono out for 540 W into 8 Ω,Compact 2 RU design,Stepped rear-panel level attenuation,Selectable 50 Hz or 300 Hz high-pass filter,Thermal protection, peak limiting, turn-on delay
Phoenix-type inputs and outputs,Three-stage front-to-rear fans,Integrated rack ears for direct mounting, havin detailed specs of Power Bandwidth THD=1%, Ref.1kHz, Half Power-45Hz - 20kHz,Input Impedance, 20Hz ... 20kHz,Balanced-20kOhm,Signal-to-Noise Ratio, A-Weighted 103 dB,Input Sensitivity at Rated Output Power or Voltage, 1kHz-0dBu (775mV),THD at rated output power, MBW=80kHz- 1kHz-0.1%,IMD-SMPTE, 60Hz, 7kHz 0.1%,DIM30, 3.15kHz, 15kHz 0.1%,Crosstalk, Ref. 1kHz, at 15% Rated,Output Power--75 dB,Power Requirements- 120V or 230V, 50Hz -60Hz,Protection -Audio Limiters, High Temperature Peak Current Limiters,Turn-On Delay,Cooling Front-to-Rear
1
-
-
... More
SITC ofHandheld Wireless Mic with Cardiod polar pattern for transmitter,Dynamic microphone with Neodymium magnet , Receiver frequency response 80Hz-18kHz,Receiver RF sensitivity 1.0 µV,Receiver Image rejection55dB,Receiver Dyanmic range 95dB and receiver having 32 channels possible,Receiver S/N ratio 100dB A,distortion 1 %, Transmitter sensitivity - 3.2 mV/Pa,modulation:+/-40kHz
1
-
-
... More
SITC of Headworn Wireless Mic with Cardiod polar pattern for transmitter,Dynamic microphone with Neodymium magnet , Receiver frequency response 80Hz-18kHz,Receiver RF sensitivity 1.0 µV,Receiver Image rejection55dB,Receiver Dyanmic range 95dB and receiver having 32 channels possible,Receiver S/N ratio 100dB A,distortion 1 %, Transmitter sensitivity - 3.2 mV/Pa,modulation:+/-40kHz
1
-
-
... More
SITC of required cables, connectors & Accessories for Meeting Hall & Conference hall apart from the BOQ items such as XLR, Phono,3.5 MM etc connectors and cables.
1
-
-
... More
SITC of Fully Loaded 6U 19" 600*600 Wall Mounted AV Rack with all required accessories -2 Nos. of Fan,16A 6 Plug PDU-1 Nos. ,Cable Manager-2 Nos., Mounting Screws-20 Pcs ; The Front frame should be integrated with top, bottom, front and two side panels for better rigidity and strength, Front Glass Door with Lock loaded, Compliance with standards shall be UL 2416., DIN 41494, IEC EN 60529, IEC EN 62262 , IEC EN 60068-2-11 , ISO 9001:2008
1
-
-
... More
Supply, laying and testing of speaker Cable 2 core 2.5 Sqmm Annealed Tinned copper braiding, Electrolythic High Conductor Copper Multistrand Flexible, Conductor as per IS:8130/1984 of class-5, PVC insulated as per IS: 5831/1984, Cores Twisted together,overall PVC sheathed as per BS-5308 Part-2 ,multi core Flexible cable
1890
-
-
... More
Supply, Laying and testing of Mic Cable, CM-Rated, 1-24 AWG stranded high-conductivity bare copper pair with PVC insulation, +90% bare copper spiral shield, PVC jacket, Nom. Conductor DCR-22.8 Ohm/1000ft, Nom. Capacitance Cond-to-Cond-- 33 pF/ft (110 pF/m), Nom. Capacitance Cond-to-Other (Conds + Shield)-61 pF/ft (200 pF/m), Max. Current- 3.9 Amps per Conductor at 25 degree Celcius;
40
-
-
... More
Supply, Installation, Testing and Commissioning of Modular Cable cubby with fully Retracting Lid, aluminium black anodized cover, Consisting of 1 x HDMI retractable cable which retracts gracefully by simply lifting it vertically above the table, , 1 x LAN and 1 x 5 Amp Power Socket
1
-
-
... More
SITC of True Interactive , Multi Touch & Writing , Palm Erasing, Airclass,Screen Sharing, Multi OS Compatibility, True Color, Imersive View , In-Built Web Browser All in One 86" OR 85" LFD Panel with following Specifications; Screen Size: 86"/85"
Panel Technology: IPS
Back Light Type; M+, Direct
Aspect Ratio: 16 : 9
Native Resolution 3,840 x 2,160 (UHD)
Brightness: w/o Glass : 490 nit (Max.), 390 nit (Typ.) w/ Glass : 450 nit (Max.), 350 nit (Typ.)
Contrast Ratio: 1,200:1
Viewing Angle(H x V): 178 x 178
Operation Hours: 16Hr
Orientation: Landscape
Video / Audio HDMI (3), RGB / Audio In
External Control: RS232C In, RJ45
USB: USB 2.0 (3, Front : 2ea, Bottom side: 1ea, Only for software update), USB 3.0 (3), Touch Out(USB2.0,B Type) (2)
Video / Audio HDMI (1), Optical Output / Audio Out
Bezel Color: Black
Bezel Width(Off Bezel) Top/Right/Left:18.9mm, Bottom:45.7mm
Monitor Dimension(W x H x D) 1957×1160×87mm
VESATM Standard Mount Interface:` 800 x 600
HW: Internal Memory (32GB), SoC (Hisi 811, Dual core A73+Dual core A53), DDR(3GB), Wi-Fi(Built-in, Slot type), Power Indicator, Local Key Operation(1, Power button)
SW: Android 8.0
Operation Temperature: 0 °C to 40 °C
Operation Humidity: 10 % to 80 %
Power Supply: 100-240V~, 50/60Hz
Power Type: Built-In Power
Power Consumption(Typ./Max) 405W / 500W
Speaker Built in 20W (10W + 10W)
Safety UL / cUL / CB
EMC: FCC Class "A" / CE
ErP / Energy Star: Yes / No
OPS type compatible Yes
Basic Power Cord 3 M*1, USB Cable (Type A-Type B) 5 M*1, HDMI Cable 3 M*1, Writing Pen*2pcs, User Manual, QSG, Carton Box, Remote Control
Embedded Writing Software: Yes
Touch type: IR
Available object size for touch Ø3 mm ↑
Response Time 60ms ↓ (Android) / 100ms ↓ (Windows)
Accuracy: ±2 mm
Interface: USB 2.0
Protection Glass Thickness: 4T (Anti-Glare)
Protection Glass Transmission: 87%
Operating System Support: Windows 7/8/10/WindowsXP/Linux/Mac/Android (WindowsXP/Linux/Mac Support one point touch)
Multi touch point: Max 20 Points / Max 10 Writing
8
-
-
... More
Supply Installation, Testing and Commissioning of Video Conference System with Following Specifications: Preferred Make- Poly/Cisco/AvayaThe proposed system must support PAL/equivalent with PTZ camera. The codec must be based on ITU standards & hardware based. No software based solution will be accepted. All components of the VC system like Codec, Camera, Microphones and Wireless Remote Control/Touch Control Panel should be from the same OEM.
Description Specification Parameter Make/Model
Package: Full HD 1080p60 PTZ Camera, 4K Codec, Omnidirectional Digital Microphone, Cables and Wireless Remote Control/Touch Control Panel from the same OEM.
Video Standards and Resolutions: It should support H.323 & SIP standards for communications. It should support interoperability and bandwidth saving using video compression H.264 AVC, H.264 High Profile, H.265 It should able to achieve 1080p resolution from 1024 Kbps onwards & 720p resolution from 512 Kbps onwards while making video call with same set of endpoint It should support 1080p 60 fps,1080p 30 fps ,720p 60 fps ,720p 30 fps.
Content Standards and Resolutions: It should support both wired and wireless content sharing using standard based H.239 and BFCP. It should also support audio from Laptop used for content sharing. It should transmit content to the far end location up to 4K15fps. It should support inbuilt feature for wireless content sharing from Windows, MacOS, Android, iOS Smartphones & Tables without downloading any application on the user device. It should support Content Annotation and WhiteBoarding / Blackboaring capability when connected to Touch Enabled Display/Monitor. It can also save snapshots taken during a content sharing or whiteboard session.
Audio Standards and Features It should support G.711, G.728, G.729A, G.722, G.722.1, G.719 or better It should support 20kHz or better bandwidth with crystal clear audio and stereo sound. Automatic Gain Control and Automatic Noise Suppression It should have inbuilt technology to identify and eliminate non-human distracting noises such as keyboard typing, paper shuffling and wrapper crinkling during video calls. Keyboard Noise Reduction, NoiseBlockAI and Acoustic Fence.
Video and Audio Inputs: 1 x HDCI input for connecting main Full HD camera 1 x HDMI input to share 4K/Full HD content from PC/Laptop/Document camera/PTZ Camera. 3 x HDMI/USB inputs to connect additional PTZ cameras from same OEM to capture whiteboard/presenter and podium area in future whenever required. 3 x Microphone Inputs or more with support for minimum 3 digital omnidirectional mics. The bidder needs to quote 2 digital omnidirectional microphone with mute/unmute soft touch button on the microphone. Each microphone should have atleast 20 feet pickup range. 1 x RCA/3.5mm stereo line-in
Video and Audio Outputs 2 x HDMI output for connecting primary and secondary 4K(UHD)/Full HD displays. 1 x RCA/3.5 mm stereo line-out
Other Interfaces 1 x 10/100/1000 Ethernet port 1 x USB to support system software upgrade Bluetooth 5.0 and WiFi 802.11a/b/g/n/ac (MIMO) for Wireless Content Sharing for Guests using their Smartphones and Tablets (Android and iOS) 1 x RS-232 Serial Port or equivalent port for connecting to external RS-232 controller
Camera 1/2.33" CMOS sensor or better with atleast Horizontal field of view : 65° The camera should support minimum 10X Optical Zoom, PAN +/-100°, Tilt +20/-30° & minimum 10 camera presets. The camera supplied should be connected to VC codec over a single cable for camera PTZ control, video out and power to avoid cable clutter. Video Conference Camera and Codec should be controlled using same remote control/touch panel.
Network Features H.323 and SIP bandwidth supporting up to 6 Mbps or more. Must support IPv4 and IPv6 from day one on both H.323 and SIP. Auto Gatekeeper Discovery, Lost Packet Recovery (LPR) technology, IP Precedence and DiffServ, Configurable MTU size
USB Pass-Thru Mode The system should have inbuilt functionality to use the VC system as an external camera and microphones when connected to a Laptop/PC over a single USB cable without using any external hardware components to connect to any Cloud Based VC platform like Cisco Webex, Zoom, BlueJeans, Microsoft Teams, Google Meet, etc. The system should be able to support up to 1080p30fps video transmit in USB Pass-thru mode. It should be possible to Mute/Unmute all the microphones and control camera functionality from the same remote control/touch control panel during USB pass-thu mode. The system should be supplied with 10 mtrs. single USB 3.0 cable from the same OEM for USB Pass-thru mode for seamless functionality.
Cloud Integration It should be possible to natively register the VC system with Microsoft Teams Room and Zoom Room account for native cloud based video calling features and experience. USB Pass-Thru mode functionality should also be available when the system in running in Microsoft Teams Room / Zoom Room mode.
Security Media Encryption (H.323, SIP): AES-128, AES-256, H.235.6 support Authenticated access to admin menus, web interface and APIs Local account password policy configuration Global Directory/Centralized Directory/LDAP support
Other Standards/features H.460.18, H.460.19, SSL, TLS
Warranty The complete solution should be from the same OEM with 3 years warranty from day one.
Authorization Must submit OEM authorization mentioning BID No.
1
-
-
... More
SITC of 4K60 4:4:4 transmitter to interoperate with a receiver for the transmission of a HDMI® signal. It should be used with a CAT5e or higher twisted pair cable to extend the HDMI Signals. For 1080p, WUXGA, and 2K signals, a cable length of up to 230 ft (70 m)should be supported. For UHD and 4K signals, a cable length of up to 130 ft (40 m) should be supported. It should support HDR10, HDR10+, and Dolby Vision® video formats, shold have compliance with HDCP 2.3,CEC (Consumer Electronics Control) , pass-through capability,EDID pass-through capability, Compact surface-mountable
5
-
-
... More
SITC of 4K60 4:4:4 Receiver to interoperate with a Traansmitter for the reception of a HDMI® signal. It should be used with a CAT5e or higher twisted pair cable to extend the HDMI Signals. For 1080p, WUXGA, and 2K signals, a cable length of up to 230 ft (70 m)should be supported. For UHD and 4K signals, a cable length of up to 130 ft (40 m) should be supported. It should support HDR10, HDR10+, and Dolby Vision® video formats, shold have compliance with HDCP 2.3,CEC (Consumer Electronics Control) , pass-through capability,EDID pass-through capability, Compact surface-mountable design
7
-
-
... More
SITC of rack-mountable 4K60 4:4:4 presentation system 04 HDMI®, two pairs of mirrored HDMI and DM Lite outputs with 4K60 scalers, and analog audio inputs and outputs.Should include support of HDR (High Dynamic Range) and Dolby Vision video formats, audio mixing, advanced EDID management, XiO Cloud connectivity, and enterprise-grade security.Ethernet for connectivity to network,USB for Programming;
2
-
-
... More
Supply and Laying of HDMI ‐ HDMI Cable 1.8 Mtrs, High-speed Category 2 HDMI® cable,24k gold-plated 19-pin Type A connectors,High-flex CL3-rated jacket, it should have guaranteed end-to-end system performance, should support 4K60 4:4:4 video, 18 Gbps bandwidth @ up to 20 ft (6.1 m), Supports 4K60 4:2:0 and 4K30 4:4:4 video @ 30 ft (9.1 m),RoHS compliant;
6
-
-
... More
Supply and Laying of HDMI ‐ HDMI Cable 5 Mtrs, High-speed Category 2 HDMI® cable,24k gold-plated 19-pin Type A connectors,High-flex CL3-rated jacket, it should have guaranteed end-to-end system performance, should support 4K60 4:4:4 video, 18 Gbps bandwidth @ up to 20 ft (6.1 m), Supports 4K60 4:2:0 and 4K30 4:4:4 video @ 30 ft (9.1 m),RoHS compliant;
2
-
-
... More
SITC of of Shielded Twisted Pair CAT-6 Control cable for connectivity complete etc. as required.
100
-
-
... More
SITC of 5MP Fixed Lens Network Bullet Camera with following Technical Specifications; Feature Specification
Image Sensor 1/2.7'' Progressive Scan CMOS
Min. illumination Color: 0.003 Lux @ (F1.4, AGC ON), B/W: 0 Lux with IR
Preferred recording Resolution 5MP (2592x1944) or better
Day & Night IR Cut Filter
Shutter speed 1/3 s to 1/100,000 s
Digital Noise Reduction 3D DNR
WDR 120dB True WDR or better
Lens 4mm
IR range 40m IR or higher
Streaming Type Should Support quad video streams or better
Video Compression H.265,H.264, H.264+,H.265+,MJPEG and Main stream supports H.264+/H.265+
Audio Compression G.711ulaw/G.711alaw/G.722.1/G.726/MP2L2/PCM/MP3
Image Enhancement BLC, HLC, 3D DNR, EIS, Defog,ROI (5 fixed regions for main stream and sub-stream).
Image settings Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser
Day/Night Switch Day, Night, Auto, Schedule
Network Protocol TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, NTP, UPnP, SMTP, IGMP, 802.1X, QoS, IPv4, IPv6, UDP, Bonjour, SSL/TLS, PPPoE, ARP, SNMP,Open Network Video Interface (PROFILE S, PROFILE G, PROFILE T),ISAPI.
Simultaneous Live View 6 channel
User Host 32 users. 3 user levels: administrator, operator and user
Security Password protection, complicated password, HTTPS encryption, IP address filter, Security Audit Log, basic and digest authentication for HTTP/HTTPS, TLS 1.2, WSSE and digest authentication for Open Network Video Interface, memory card encryption.
Edge base Recording storage Built-in memory card slot, support microSD card, up to 256 GB
Preferable analytics features Motion detection, video tampering alarm, Line crossing detection, intrusion detection,scene change detection, video quality diagnosis.
Event Alarm Notify surveillance center, trigger recording, trigger capture, send email, audible warning,network disconnected, illegal login.
Ethernet Port 1 x RJ45 10M/100M Ethernet port
Audio interface 1x input, 1x output
Power Supply DC12V, PoE (802.3af)
Operating Conditions -30° C ~ + 60° C
Ingress Protection IP67
Certifications CE, FCC, UL,BIS.
4
-
-
... More
SITC of 5MP Fixed Lens Network Dome Camera with following Technical Specifications; Feature Specification
Image Sensor 1/2.7'' Progressive Scan CMOS
Min. illumination Color: 0.003 Lux @ (F1.4, AGC ON), B/W: 0 Lux with IR
Preferred recording Resolution 5MP (2592x1944) or better
Day & Night IR Cut Filter
Shutter speed 1/3 s to 1/100,000 s
Digital Noise Reduction 3D DNR
WDR 120dB True WDR or better
Lens 4mm
IR range 40m IR or higher
Streaming Type Should Support quad video streams or better
Video Compression H.265,H.264, H.264+,H.265+,MJPEG and Main stream supports H.264+/H.265+
Audio Compression G.711ulaw/G.711alaw/G.722.1/G.726/MP2L2/PCM/MP3
Image Enhancement BLC, HLC, 3D DNR, EIS, Defog,ROI (5 fixed regions for main stream and sub-stream).
Image settings Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser
Day/Night Switch Day, Night, Auto, Schedule
Network Protocol TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, NTP, UPnP, SMTP, IGMP, 802.1X, QoS, IPv4, IPv6, UDP, Bonjour, SSL/TLS, PPPoE, ARP, SNMP,Open Network Video Interface (PROFILE S, PROFILE G, PROFILE T),ISAPI.
Simultaneous Live View 6 channel
User Host 32 users. 3 user levels: administrator, operator and user
Security Password protection, complicated password, HTTPS encryption, IP address filter, Security Audit Log, basic and digest authentication for HTTP/HTTPS, TLS 1.2, WSSE and digest authentication for Open Network Video Interface, memory card encryption.
Edge base Recording storage Built-in memory card slot, support microSD card, up to 256 GB
Preferable analytics features Motion detection, video tampering alarm, Line crossing detection, intrusion detection,scene change detection, video quality diagnosis.
Event Alarm Notify surveillance center, trigger recording, trigger capture, send email, audible warning,network disconnected, illegal login.
Ethernet Port 1 x RJ45 10M/100M Ethernet port
Audio interface 1x input, 1x output
Power Supply DC12V, PoE (802.3af)
Operating Conditions -30° C ~ + 60° C
Ingress Protection IP67
Certifications CE, FCC, UL,BIS.
80
-
-
... More
64 Channel NVR Processor : Dual-core embedded processor,Operating System : Pre-loaded Licensed OS,IP Camera Support : Min 64 Channel or higher,Two way talk : 1 Channel O/P and 1 Channel I/P,Compression : H.265, H.264, MJPEG4,Video Resolution: Should support up to 8MP IP Camera. Video Recording (Incoming bandwidth) : 256 Mbps,Video Display Split : 1/4/8/16/32,Video Loss : Support,Camera Blank : Support,Alarm Input/ Output : Min 16 channel / Min 4 Channel or betterHard Disk : Min 8 SATA ports , up to 32TB , Raid(Redundancy), ,Smart Phone : iPhone, iPad, Android, Windows,Phone,Protocol : IPv4/IPv6, HTTP, HTTPS, SSL, TCP/IP,UDP, UPnP, ICMP, IGMP, SNMP,RTSP, RTP, SMTP,NTP, DHCP, DNS, PPPOE, DDNS, FTP, IP Filter,ONVIF Profile S,User Account : 10 Users,Trigger Event : Recording, Alarm, Video Push, Email,FTP,Recording Mode : Manual , Schedule , STOP,Search Mode : Time/Date , Alarm , Motion Detection ,Exact Search (accurate to second), Smart Search,Playback : Play, Stop, Pause, Rewind, Fast Play, Next file, Previous file, Next Camera, Previous Camera, Full Screen, Backup Selection,Backup Mode : USB Device / Internal SATA / NetworkInterface Ports : 2 USB 2.0 , 1 RS485 , 1,RS232, 2 RJ45,Ethernet Ports : 2 RJ-45 port (10/100M/1000M),Power SITC : AC 100V~240V 50/60Hz,Regulatory : CE, FCC,UL and RoHS;
2
-
-
... More
SITC of 8 TB Surveillance Grade Hard Disk for NVR for 30 Days Back up of specification:Form Factor 3.5,Capacity (TB) 8 terabyte,Cameras supported :64,Number of USB 2 Ports: 0,Interface :SATA 6 Gb/s,Workload Rating (TB/year) :180,OS Supported: Windows,
NVR-Ready :Yes,Bay Count Support :8,Cache (MB): 256,Water Resistant: No,Shock Resistant: No,Dimension (W x H x D) (mm x mm x mm) -Weight (Grams): 780 gram,Wattage (Watts) 9,Standard Accessories to be supplied :NA,Operating Temperature Range (Degree C) :5-70,Operating Humidity (% RH) :90,Availability of Test Reports from Central Govt / NABL approved / ILAC acredited lab to prove conformity to the specification (Test reports are to be furnished when demanded by buyer): Yes
16
-
-
... More
Supplying of 55" 4k LED Panel of specification: Type/Category/Class of TV set:Smart TV(2),Display Type/Technology:LED (Light Emitting Diode),Nominal Screen Size Range (Inches):more than 55 inch -upto 80 inch,Audio Power (minimum):20W x 2,Maximum Resolution (Pixels) supported:4K Ultra HD (UHD): 3840x2160,Typical Brightness (Nits):400 - 499,BEE Star Rating:2 star,Comprehensive Standard Warranty(Years) Comprehensive Standard Warranty(Years):1
Warranty on Display only (Years):2
2
-
-
... More
SITC of Digital Podium: Material: Mild Steel; Should have Tray for Keyboard. ( Keyboard Dimension Standard Lenovo Keyboard) Built-in Document Camera and 21” Interactive Panel .It should also have the flexible options in sizes for the 19” or 22” Interactive Panel to fit in. Interactive Panel positioning motorized up and down as per the user convenience . The top should be of wood. Should have a space for the Desktop in the 19” rack for the equipments to fit in as per the International standards. Sliding Shelf/Tray with Locks - For placement of extra lap top or Document to show through Inbuilt Documenment Camera and for Presenter with Internal Lock. It should have 3 options in lock- Manual key, RFID and Biometric (finger) for better security ands ease of use. The single slidling wooden shelf should cover all equipments - Interactive Monitor, Document camera and multimedia controller. They should be hidden and should not be visible. "It should have door locks. Visual Presenter or Document Camera should be installed and placed next to the interactive monitor for ease of use of both the items.Programmable Central Control System : Should be able to control from the Controller with easy identified keys - Projector On Off, Switching between PC, Visual Presenter and laptop, Volume Control. Ports and connectivity : - Front Panel should have touch sensing keys for Control, The controller should get on with a touch of smart key so only authorisew person can operate it. Power Plug 0f 220 Volt Power out for Laptop etc., HDMI Input x 1, VGA Input Port X 01, Audio port x 2, Network Port wired Internet x 01, USB X 01 Ports to facilitate inputs directly from Pen Drives / USB based hard disk Drive. Back Panel of the Controller should have, 1 x RS 232 Projector Control, 2 x 2 VGA matrix, 2 HDMI Input and 2 HDMI Output, 1 USB Ports for front Connectivity, 1 Audio for PC, 1 Audio in for Visualizer, 2 x Audio out, 1 x Projector Power, 1 x Screen Power. The Interactive Monitor touch should work independently for the both Laptop and PC. Whichever source is selected PC/Laptop when both are connected to the Podium the content should appear on Interactive Panel along with touch activated of the selected source, automatically without detaching or attaching a cable. "
Additional Ports: On the left side of the podium. 1 x Power Plug, 2 x USB 2.0, 1 x HDMI, 1 x VGA, 1 x LAN, 1 x Mono, 1 x Audio Video. Connectivity Ports at the bottom 1 x LAN, 1 x VGA, 2 x HDMI, 1 x Power Plug. Audio – 1x Gooseneck Microphone, Interactive Panel : Panel Type : Active Matrix Color LED; Display Size :21” , Resolution : 1920 x 1080; Colors :16.7 M, Contrast :800:1; Inputs : HDMI or better input; Technology : Electromagnetic with Pen; Interface : USB; Pressure Sensitivity :2048 Levels; Data Report : 125 reports / per second; Accuracy : ±0.5mm; Max Reach Height : 8mm. Audio : 1 x Gooseneck Microphone.; Preffered Make- ATDSC/AHA/Labwe `PC with configuration of Intel® Core i7-12700/8GB DDR/HDD 1TB+512GB SSD/win 11 Pro/Wifi +BT/NO ODD/Wired Key Board+Mouse/3 Yrs Warranty/21" monitor
6
-
-
... More
SITC of Cable & Connectors(Aprox.)all complete as per direction of E/I.
7
-
-
... More
Supply, Installation, Testing & Commissioning of Line Array Speaker with below Specifications:-
Transducer Size : 2 x 8" LF Driver + 2 x 1" Planar Wave Manifold Compression Driver
Power Handling : HF - 100 Watts Continuous, 400 Watts Peak | LF - 400 Watts Continuous, 1600W Peak
Freq. Range : 55 Hz - 20 kHz
Dispersion : 100 x 10, Sensitivity : HF - 110 dB | LF - 96 dB
Max SPL : HF - 136dB continuous, 142 dB peak | LF - 119dB continuous, 125 dB peak
6
-
-
... More
Supply, Installation, Testing & Commissioning of Subwoofer with below Specifications:-
Transducer Size : 2 x 18" LVC Driver
Power Handling : 1250 Watts Continuous, 5000W Peak
Freq. Range : 29 Hz - 180 kHz
Dispersion : Omni-directional, Sensitivity : 105 dB
Max SPL : 135dB continuous, 141 dB pea
2
-
-
... More
Supply, Installation, Testing & Commissioning of Line Array Frames for the aforementioned speakers all complete as per direction of E/I.
2
-
-
... More
Supply, Installation, Testing & Commissioning of Speaker with below Specifications:-
Transducer Size : 6"" LF Driver + 1 x 1"" Horn-loaded Compression Driver
Power Handling : 150 Watts Continuous, 600W Peak
Freq. Range : 74 Hz - 26 kHz
Dispersion : 120 x 60
Sensitivity : 90 dB
Max SPL : 111dB continuous, 117 dB peak
4
-
-
... More
Supply, Installation, Testing & Commissioning of Brackets for the aforementioned speakers all complete as per direction of E/I.
4
-
-
... More
Supply, Installation, Testing & Commissioning of Speaker with below Specifications:-
Transducer Size : 2 x 6" LF Driver + 1 x 1" Diffraction Horn HF Power Handling : 250 Watts Continuous, 1000W Peak
Freq. Response : 75 Hz - 26 kHz
Dispersion : 160 x 40
Sensitivity : 91.5 dB
Max SPL : 115dB continuous, 121 dB peak
6
-
-
... More
Supply, Installation, Testing & Commissioning of Class-D Power Amplifier with below Specifications:-
Number of Channels : 2
Power at 4 Ohms per channel : 1000W
Power at 8 Ohms per channel : 500W
Class-D with LCD Display for critical factors, dual step power factor correction, built in crossover to set HPF & LPF Filters
2
-
-
... More
Supply, Installation, Testing & Commissioning of Audio Power Amplifier with below Specifications:-
Number of Channels : 2
Power at 4 Ohms per channel : 2400W
Power at 8 Ohms per channel : 1100W
With built-in limiters and step up crossover to assign sub & toop frequencies
4
-
-
... More
Supply, Installation, Testing & Commissioning of Audio Power Amplifier with below Specifications:-
Number of Channels : 2
Power at 4 Ohms per channel : 1500W
Power at 8 Ohms per channel : 700W
With built-in limiters and step up crossover to assign sub & toop frequencies
4
-
-
... More
Supply Installation Testing Commisioning of a Floor Standing Twin Capsule Gooseneck Microphone with the below specifications:-
No. of microphones: 2, Type: Electret Condenser, Polar Pattern: Supercardioid, Freq. Response: 20-18 kHz, Max SPL: 139 dB, All Metal Housing, 36"" Boom length, Working Volatge: 48V DC Phantom Power, Adjustable Boom arm & a flat low profile floor standing base.
2
-
-
... More
Supply, Installation, Testing & Commissioning of Software Controlled Digital DSP with below Specifications:- Number of Inputs - 4,
Number of Outputs - 8,
Input Impedance - 12kΩ unbalanced, 24 kΩ balanced
CMMR - 45 dB
Adjustable Delay - 1 second / input & 1 second / output
6
-
-
... More
Supply Installation Testing Commisioning of a Vocal Condenser Microphone with the below specifications:-
Type: Electret Condenser, Polar Pattern: Super Cardioid, Freq. Response: 80-18 kHz, Max SPL: 150 dB, Studio Grade Large Mic Diaphragm, All Metal Housing, Mute Switch, Foam Protector for protection against wind & pop noise, Anti Glide Mic holder, Working Volatge: 48V DC Phantom Power
4
-
-
... More
Supply Installation Testing Commisioning of an Instrument Condenser Microphone with the below specifications:-
Type: Hybrid Condenser, Polar Pattern: Cardioid, Freq. Response: 80-18 kHz, Max SPL: 129 dB, All Metal Housing, Mute Switch
4
-
-
... More
Supply, Installation, Testing & Commissioning of Wireless Receiver with the below specifications:- Diversity Principle: True Diversity, No. of Channels : 1, Frequency response 20-20 Khz, Frequency Selection: Auto, Modulation : Wideband FM, Attenuation : 0 to 14 Db selectable , LED Display, Range : 100 meters, With RF Shielding
6
-
-
... More
Supply, Installation, Testing & Commissioning of Wireless Handheld Microphone Transmitter with the below specifications:- Microphone with Display on Transmitter, Type : Dynamic, RF Power Output : 30mW, Polar Pattern: - Cardioid, Frequency response: 55 Hz to 20Khz, Mute Button on Transmitter, Battery Operation time: 8 hour with rechargeable battery, Range : 100 meters, PLL Synthesized Circuits
4
-
-
... More
Supply, Installation, Testing & Commissioning of Wireless Bodypack Transmitter with the below specifications:- RF Power Output : 30mW, Frequency response: 20 Hz to 20Khz, Volume & Mute Button on Transmitter, Battery Operation time: 8 hour with rechargeable battery, Range : 100 meters, PLL Synthesized Circuits.
4
-
-
... More
Supply, Installation, Testing & Commissioning of a Flag Antenna Kit with the below specifications:- Complete wireless antenna distribution kit with (2) Flag Antennas, antenna amplifier & a signal splitter.
1
-
-
... More
Supply, Installation, Testing & Commissioning of a Complete Power & Signal Management Rackmout kit that can house upto 4 single channel or 2 dual channel receivers.
2
-
-
... More
Supply Installation Testing & Commissioning of a 64 Channel Digital Mixer with the below specifications:-
64 Input Channels, 32 Output Channels
2 Touchscreen Control Wings,
96kHz Audio Processing Sample Rate,
Dedicated Plugin Server with Dugan Automixing capability,Complete with Flightcase and covers
1
-
-
... More
Supply Installation Testing & Commissioning of a 32-in, 16-out Stage Rack for the above mixer as per direction of E/I.
1
-
-
... More
Supply Installation Testing & Commissioning of Mic Stands Big, with boom arm as per direction of E/I.
8
-
-
... More
Supply Installation Testing & Commissioning of Mic Stands Small, with boom arm as per direction of E/I.
4
-
-
... More
Supply Installation Testing & Commissioning of19" 9U Wall Mount Rack , 500mm X 600mm Equipment rack with complete fan, tray, rack rails, etc. as per direction of E/I.
1
-
-
... More
Supply Installation Testing & Commissioning ofPatch box with 08 connector options for mic & stage monitor
2
-
-
... More
Supply Installation Testing & Commissioning of23/0.2 mm Mic Cable, 100 M roll as per direction of E/I.
4
-
-
... More
Supply Installation Testing & Commissioning of Connectors & Patch Cables as per direction of E/I.
1
-
-
... More
SITC of Active LED Wall with Following Specs and details;
"Size: 4500mm x 2500m - 1 Screen(s); 14.8 ft x 8.2 ft; Resolution: 1800px x 1000px
Pixel Pitch 2.50 mm or better, Pixel Density 160000 Pix / Sq - Mtr or better, Bonding Wire Copper Wire, Cabinet Type Die CastAl, Service Access Front, Ingress Protection Front IP30 / Back IP30, Key Features Slim and Lightweight, No Structure, Fanless, Display Dimensions (W x H) 4.50m x 2.50m 14.8 ft x 8.2 ft minimum, Display Area 11.25 sq m 121.4 sq ft, Pixel Matrix (W x H) 1800 x 1000, No. of Tiles (W x H) 45 (9 x 5), Diagonal Size 203 inches, Aspect Ratio 9:5, Cabinet Dimensions 500mm x 500mm x 45mm or better, Clearance Required At The Back Front Access Screen - 150mm Back Access Screen - 600mm, Max Brightness 800 nits (cd/m2) or better, Calibrated Brightness 700 nits (cd/m2) or better, Viewing Angle 160x160 or better, Data Processing 14-16 Bit, Colours Up to 281 Trillion, HDR10 No, Refresh = 3840, Contrast 5000:1, Max. Power Consumption 350 W/m2, Max. Power Consumption - Screen 3.94 KW
1
-
-
... More
SITC of Video Controller having Standard Inputs DVI×1, HDMI×2, SDI×1, 1 xOPT, Standard Outputs LED Out × 4, HDMI Out × 1 (Monitor), Control Port Ethernet, USB Type B, PIP 2 or more, Power Consumption 25 W,
1
-
-
... More
SITC of Fabrication work along with Mount Bracket and related Electrical work as per direction of E/I.
1
-
-
... More
Supply, Installation, Testing and Commissioning of 65" LED Display Panel, with 4K Resolution : 3840 x 2160, 500 nits (cd/m2) Brightness, contrast ratio : 3000:1, Viewing Angle : 178° h/v, response time : 8ms, Inputs : HDMI x 2, DVI‐D, DisplayPort, Audio, RS‐232 Control, 100‐240 VAC @ 50/60Hz Power Supply, 24x7 Operation.;
2
-
-
... More
SITC of Ceiling mounting Kit adjustable powder coated MS Pipe type with inbuilt mount Bracket , Height- 3 Mtr For LED Panel of Size 65 "; as per direction of E/I.
2
-
-
... More
SITC of 1:4 Distribution Amplifier-high-performance 4K AV distribution amplifier designed to split a single HDMI® signal to feed up to four separate displays, switchers, and/or other devices. It provides full support for UHD and DCI 4K60 4:4:4 and HDR video, HDCP 1.4 or 2.2 copy protection, and high-bitrate 7.1 audio, to ensure optimal performance and compatibility for any HD or 4K video application;as per direction of E/I.
1
-
-
... More
SITC of Main Valence fixing arrangement using 40NB Pipe 2mm thick, 13 mtr in length MS pipe, undergone through 7 tank process with various chemical treatment to keep them rust free duly powder coated with matt black texture finish with mounting brackets to suspend the arrangement including all accessories etc complete as required.
1
-
-
... More
SITC of Fire retardant velvette (Maroon/Red/Blue) fabric 100% (2 times of the finished dimension) gathering for main Valance as per the approved patern and colour, not less than 250/300 GSM, duly stitched along with and eyelets including all accessories etc complete as required. Size :L 13 Mtr x H 1.2 Mtr.
1
-
-
... More
SITC of Main curtain track system 13 Mtr long, centre parting with overlap of 0.9mtr provided with, Heavy duty extruded aluminium I track of 48x84mm, powder coated Track mounting brackets constructed of C track of dimension 40X50X40mm Electromechanical drive unit with 3PH INDUCTION MOTOR, 1.1KW, 3000RPM, 90B5
FLANGE MOUNT with GI wire ropes of 3mm in diameter constructed with 7 bundles of 7 strands with steel core at center Curtain holding Nylon wheel trollies consisting of 4 wheeler master trolley and 2 wheeler trolley placed uniformly at specific interval
of 200mm throughout the track.Nylon moulded 6201 Ball bearing Diverter pulley with with 90mm for outer diameter, 72mm diameter at groove base, 19mm pulley thickness & MS yellow passivated Routing pulleys with 165mm for outer diameter, 150mm diameter at groove base with 12mm pulley thickness including all accessories etc complete as required.
1
-
-
... More
SITC of Fire retardant velvette (Maroon/Red/Blue) fabric with lining 100% (2 times of the finished dimension) gathering for main curtain as per the approved patern and colour, not less than 250/300 GSM, duly stitched along with eyelets including all accessories etc complete as required.
Size: L 13 Mtr x H 4.5 Mtr.
2
-
-
... More
SITC of Fixed Side Wing Structure designed as per site condition for a height approx 5 Mtr x 2 Mtr made up of MS Square tube of 25mm or higher size rested on pivotable trolley on a track for the rotation of the wing with all accessories as required.
2
-
-
... More
SITC of Glazzed Cotton(Ink blue/black) fabric fire retardant treated as per approved colour and make with a gathering of 0% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing. (For Wing) 4.5Mtr x 2Mtr complete with all accessories as required
2
-
-
... More
Supply, fitting, fixing, commissioning and testing of 35 Sq. MM Copper Conductor Multi strand PVC Sheilded FRLS Wire with suitable Copper LUGS for Battery Interconnection and suitable 50 Sq. mm copper wire of 4 length of 10 mtrs each for UPS to Battery excluding cable from PANEL to UPS and UPS to panel.
1
-
-
... More
SITC of OPS Device for intractive Panel with 8th Gen Intel Core i5 8th Gen, 8260u 4K@ 60Hz processor, 16GB DDR4 RAM, 128GB SSD, 1TB HDD, WIFI+BT, Win 11, Wireless Keyboard & Mouse; Make-: As compatiible to the Intractive Panel as per direction of E/I.
8
-
-
... More
SITC of PTZ Camera USB based : Yes; Zoom : Minimum 20X Optical Zoom; Digital 16X; Iris: f=5.5~110mm ; F1.6 ~ F3.5;Viewing Angle:3.3° (tele) –54.7° Wide ;Sensor:1 /2.8inch or better CMOS sensor; Mega Pixels:2.07 ; Video Format: SDI Video Formats: 1080P60/50/30/25/59.94/29.97 ; 1080I60/50/59.94. 720P / 50/ 30 / 25 /59.94/29.97; Minimum illiumination:0.5 Lux ; DNR:2D & 3D DNR; White Balance :Auto/Manual/One push 3000K / 3500K / 4000K / 4500K / 5000K / 5500K / 6000K / 6500K /7000K; Electronic Shutter : Auto/Manual; Focus : Should be Auto/Manual/One Push; BLC:ON/Off; WDR : Off/Dynamic level adjustment; Video Adjustment: Brightness, Color, Saturation, Contrast, Sharpness, B/W mode, Gamma curve; SNR : 55 dB; Interface : USB 2.0 x1 , USB 3.0 x1, LAN x1, RS232 x 1, HDMI x 1 ; Audio InVideo Compression Format:H.265/H.264 ; Control Protocol: VISCA/PELCO-D/Pelco-P; Baud Rate : 11520 / 9600 / 4800 / 2400 ; LAN Port :Yes; Network Protocol: RTSP/RTMP/ ONVIF, GB/T28181; Pan Rotation:+ 170° Tilt Rotation :-30°~+90° ; Pan Control Speed: 0.1~60°/second ;Tilt Control Speed : 0.1~30°/second ;Preset Speed: Pan: 60°/second, Tilt 30°/second ;Preset Number:255 preset;
4
-
-
... More
SITC of Tracking Camera should follow the faculty as per the movement Zoom: Minimum 20X Optical Zoom ; Iris: f=4.7~94mm ; F1.6 ~ F3.5; Viewing Angle: 2.9° (tele) –55.4° Wide; Sensor : 1 /3 inch or better CMOS sensor; Pixels : 2.07 Mega Pixel ; Video Formats: 1080P60/50/30/25/59.94/29.97 ; 1080I60 /50/59.94. 720P / 50 / 30 / 25 /59.94/29.97; Minimum illumination : 0.5 Lux;DNR : 2D & 3D DNR; White Balance : Auto/Manual/one push / 3000K / 4000K 5000K / 6500K; Focus :Auto/Manual ; BLC : ON/Off; WDR : Off/Dynamic level adjustment Video Adjustment : Brightness, Color, Saturation, Contrast, Sharpness, B/W mode, Gamma curve; SNR : 55 dB; Panoramic Camera: Sensor 1/3 inch high quality HD CMOS sensor; Effective Pixels: 2.1 Megapixel; lens: Manual Focus; View Angle (D/H/V): 122°/98°/73°; Input / Output : Video Interface: HDMI x 2, LAN Port x 2, USB x 2, RS 232 x 2 ; Network Interface: 100M network interface ( 10/100BASE-TX) 5G , LAN, RS232/485; Video Compression Format : H.264/H.264+ ; Compress Image Code Stream : Dual stream output; Control Protocol : VISCA/PELCO-D/Pelco-P; Baud Rate : 11520/9600/4800/2400; LAN Port : Yes ; Network Protocol : RTSP/RTMP/ ONVIF, GB/T28181;Pan Rotation : -170°~+170°;Tilt Rotation : -30°~+90°; Pan Control Speed : 0.1~80°/second ; Tilt Control Speed : : 0.1~60°/second ; Preset Speed : Pan: 80°/second, Tilt 60°/second ; Preset Number : 255 preset;
4
-
-
... More
SITC of Celling Mount for Camera all complete as per direction of E/I.
8
-
-
... More
SITC of Camera switcher : It should be dual channel video switcher mixer for the streaming generation, mini-pro features four resolution independent inputs – three up to 2K and one up to full 4K@60 to take advantage of native high-performance sources, whether cameras or laptops, without compromising on quality; It should have presets for PIP and PBP , it should also include full pixel-to-pixel scaling capabilities for both the PIP and background video layers ; It should have Audio for output should be selectable from embed ,It should have built-in LCD display just not to only shows video preview, but it should be touch enabled for day to day operation of features and settings. ; It should have features including dynamic output control, preview multi-view, picture in picture, Chroma Key, video transitions, on board PTZ camera controls etc.; Stream : It should have superspeed USB3.0 streaming in which just by connecting the device to a laptop or other device it should stream quickly and easily to various social media and streaming platforms as well as a vast array of popular collaboration applications.; Go Live : It should be able to display local and live with the 2K HDMI output port – which should be used for a preview or the live program output. It should be more than a streaming switcher and should also be a live event switcher; Record: It should be able to from dedicated USB port to capture, record video and audio directly from the device with any portable HDD up to 2TB.; Control : It should have on board control for PTZ cameras directly within the device. It should save attribute views of cameras for recall at the touch of a button.; Preview : It should be able showcase all sources live immediately in the builtin LCD display. It should have the facility to get connected to a video output and should display a multi-view preview to always see the next preset before going live.; Mix : It should have transition and switch between live video program and preset. It should be able to recall saved preset views along with scaled video layers.
4
-
-
... More
SITC of Wireless Handheld and Collar Microphone: A wireless Professional microphone for PA applications, Consists of One handheld & One Head worn/ Lapel microphones, High quality UHF band frequency duel Wireless Microphone System, Distance up to 100 feet (between Receiver and microphone), Individual channel output with level control & mix output. Display on Transmitter & Receiver for frequency indication, Two microphones can be used at the same time, Separate LCD Display for channels, High Quality capsule in Handheld. XLR Balanced and unbalanced outs. Miniature high Quality metal capsule in lapel. Plastic Flight Case .
4
-
-
... More
SITC of Handheld Combo Variable Frequency: High quality UHF band frequency dual Wireless Microphone System; 80 Selectable UHF Channels. UHF Operating Frequency Range: 583–683 MHZ; Back Light Display for Frequency Identification ;Individual channel output with level control & mix output ; Two microphones can be used at the same time; Easy setup of the system with Infra-Red; Can cover distance upto 150 mtr. (between Receiver and Microphone); Separate LCD Display for channels; High quality capsule in Handheld Mics; XLR Balanced and unbalanced out; Flight Case.
5
-
-
... More
SITC of Amplifier:Power Output 245W Max., 175W RMS at 10% THD, 110W RMS at 5% THD, Output Regulation 2 dB, no load to full load at 1kHz , Input Channels 5 X Mic. 0.65mV/4.7k Ohms , 2 X Aux 100mV/470k Ohms; Frequency Response 50-15,000Hz ±3dB, Signal to Noise Ratio 60dB, Tone Controls Bass ±10dB at 100Hz, Treble±10dB at 10KHz, Outputs Line: 200mV/600 Ohms, 1V/1k Ohms, Speaker Output 4 Ohms, 8 Ohms & 100V, Digital Player MP3 Player with USB, SD Card & Bluetooth, Power Supply AC: 220-240V 50/60Hz , DC: 12V, Power Consumption : AC : 250VA DC : 4A; Power Consumption AC : 250VA DC : 4A, Consist of USB Pen drive Port ,SD Card Plug and Play, Compatible with Radio & Bluetooth, EQ & Recording, 5 Channels Microphone Inputs, 2 Channels Aux Inputs, 1 Channel Line Output. 100V Constant Voltage Output and 4Ω\ 8 Ω \16 Ω Resistance Output
7
-
-
... More
SITC of Wall mount Speaker: Power Tap: 5W/10W/20W/OFF-8ohm,Power at 8ohm, 30W;Peak Power: 60W,SPL@1M: 89±2db, Max SPL@1M: 104db, Frequency Response: 100-20KHz,Dispersion Angle: Vertical : 80° and Horizontal:100° (1KHz),Enclosure Material : PP Enclosure and 360-degree metal mounting bracket, Speaker 4.25” weatherproof woofer and 1” silk tweeter.
10
-
-
... More
SITC of Digital signal processor : Should have Double Core chip having 456MHz or better; Should have Microphone Inputs x 04 or more; Should have Microphone / Line outputs x 04 or more ; Should have Input processing’s with Preamp, Signal Generator, Expander, Compressor, 5-band parametric equalisation, Auto gain, AM auto mix function, AFC Adaptive Feedback Cancellation; Should have Output processing with Speaker management having 31-band graphic equaliser, delay, crossover, limiter, high and low channel filters; Should have Matrix Mixing of input and output signals, mixing component control or better; Should have Automatic Mixing Console ; Should have AFC Auto feedback elimination; Should have Auto Echo cancellation; Should have Auto Noise Cancellation module; Should have Automatic mixing console, Ducker, or better, Should have built-in USB as Microphone in and Audio out for Software based VC as well as for recording the conference and playing digital audio, Should have camera tracking for Look At Me / Speaker tracking, Should have minimum 8 GPIO ports free to configurable as required.; Should have Central Control Command Cet Generator ; Should have Sampling rate of 48Khz or better, Frequency response of 20Hz – 20Khz + 0.2dB or better, Should have input gain amplification of -24～27dB 3dB,Level 1 with minimum 7 levels or better; Should have background noise -90dBu or better ; Should have THD+N ≦0.004% @4dBu or better ; Should have Automatic power failure protection memory function; Should have per channel phantom power 48V module or better. ; Should have software which should be configurable PC and also through Mobile devices like Smart phones, Tablet etc. Should have password facility to avoid misuse having separate password for the admin and separate for users. Should have facility to save the different setting done in a file upto 100 or more settings. ; Should have Ethernet Port RJ 45 x 1; Should have RS 232 x 1; Should have RS 485 x 1.
4
-
-
... More
SITC of HDMI Extender Transmitter & Receiver connected on Cat6 cable, Supports Upto 50 Mtr, Full HD as per direction of E/I.
8
-
-
... More
Supply, installation, testing & commissioning of 08 PASSENGER / 544 KG LIFT lift having contract speed of 1.5 MPS serving different floors in the lift shaft. Lift will be complete with combined luminous hall button with seven segment digital hall position indicator at all floor, car operating panel with luminous buttons, seven segment digital car position indicator combined with direction arrows, overload warning indicator, battery operated alarm bell and emergency light, fireman's switch at main lobby enclosed and as under:- 1) DESIGN OF LIFTS - PASSENGER TYPE 2) CAPACITY - 08 PASSENGER / 544. KG 3) SPEED - 1.5 m/s 4) DRIVE - V3F 5) WITH MACHINE ROOM 6)TRAVEL -13.950 Mtr. (Approximate) 7) FLOORS - GROUND TO FIFTH FLOOR 8) NO. OF STOPS - 5 Stops 9) REQUIRED WELL SIZE - as per Drawing 10) POWER SUPPLY - 415 V - 3 Phase 50 HZ AC 11) AUXILIARY - Single Phase 220 V AC 12) CAR SIZE - Suitable for 10 Passengers 13) CAR ENCLOSURE a) CAR CEILING - SS HAIRLINE FINISH b) CAR PANELS - SS HAIRLINE FINISH c) ILLUMINATION - LED LIGHT d) CAR FLOORING - 20 MM RECESS 14) NO. OF ENTRANCE - ONE LOCATION FRONT 15) CAR ENTRANCE - AUTOMATIC COPD DOORS IN SS HAIRLINE FINISH 16) DOOR SAFETY - FULL HEIGHT INFRARED LIGHT CURTAIN 17) LANDING ENTRANCE - AUTOMATIC COPD DOORS IN SS HAIRLINE FINISH 18) CONTROL - SELECTIVE COLLECTIVE SIMPLEX 19) ARD-TO BE PROVIDED
2
-
-
... More
Supplying & Placing 1200 mm x 610 x Excutice computer table Type of Computer Table Computer table with key board drawer and table top Construction of Computer/Printer Table Gable end and modesty panel Colour of Top As per Buyer's Choice Material of table top,keyboard and drawer Three layer prelaminated particle board(Wood Product) of grade II type II of IS 12823/Latest Gable end and Modesty panel material Three Layer prelaminated particles board(wood product) of grade II type III of IS 12823/Latest Leg Material NO LEGS Table top thickness ±2mm 19 millimeter Thickness of gable end and modesty panel ±2mm 19 Dimension of leg(mmXmm) ±5mm No legs Length of table in mm (±15 mm) 1200 millimeter Depth of table in mm (±10mm) 610 millimeter Height of table in mm (±10mm) 760 millimeter Type of keyboard tray Wooden keyboard tray Material of footrest No footrest Material thickness of footrest ±2mm No footrest Product having BIFMA certification YES OEM of offered product is ISO 9001:2015 certified YES OEM of offered product is ISO 14001:2015 certified YES OEM of offered product is ISO 18001:2007/45001:2018certified YES
40
-
-
... More
Supplying and Placing Writing Board 1200mm x 1800mm Purpose : Writing Mounting type : Wall mounts Frame (All round framing) : With, Writing board placed Top Surface materials (Used for white board surface) : Porcelain Top surface material thickness : 0.7 mm to 0.8 mm Frame material :Anodized extruded aluminum alloy hollow section conforming to IS 733
37
-
-
... More
Supplying and Placing Executive Table with Pedestal/Side Storage Unit of Specification:Material type :Wooden/Engineer wood understructure,Material of Table:Particle Board,Availability of modesty panel:Yes,Table Top of Material type:Particle board,Table Top Thickness:25 mm,Length of Table Top:1500 mm,Depth of Table Top:750 mm,Height of Table Top Adjustable:No,Material Type of ERU:Particle Board,Width of ERU:Particle Board,Width of ERU:900 mm,Depth of ERU:Particle board,Material of Pedestal:Wooden/Engineer wood,Positioning of fixed pedestal:One side,Type of Material of Finish/Lamination in wooden Top:Laminate,Edge Material:PVC Edge Branding,Design of Modesty Panel:Solid(Uniform),Support type of Table Understructure:Gable,Colour Family of Table Top:Brown,Colour Family of Understructure:Brown,Colour Family of Modesty Panel:Brown.Colour Family of ERU:Brown
160
-
-
... More
Supplying & Placing Medium Back Chair, Chrome Plated Pipe PU Arm, Gas Lift, Chrome Base, Mesh Back & Seat Net Tapestry Chair mechanism Tilt working with torsion bar mechanism Type of locking Upright locking Number of arm movement N.A Pedestal Base Chrome plated MS Armrest Material Polypropylene Seat material Pressed and moulded with PU foam Backrest is made of One piece hot pressed plywood with PU foam Density of PU foam used in seat KG per Cu Meter (± 3) 40 Density of PU foam used in backrest in KG per Cu Meter (±3) 40 Backrest upholstered with 100% Polyester Fabric Seat upholstered with 100% polyester fabric GSM/Thickness of fabric ±5%(Gram/Square meter) 220 gram Overall width (±10 mm) 650 mm Backrest Height ±15 mm 690 mm Backrest Width ±10 mm 440 mm Seat Height ±10 mm 440 mm Seat Width ±10 mm 480 mm Seat Depth ±10 mm 480 mm Thickness of MS Plate Joining the under structure with Seat 5 mm Thickness of Plywood used in Seat ±1(mm) 12 mm Thickness of Plywood used in Backrest ± 1(mm) 12 mm Pedestal Size (Diameter in mm) ±10 mm 600 mm Thickness of Polyurethane Foam Used in Seat in mm (±2 mm) 30 mm Thickness of Polyurethane Foam Used in Backrest in mm((±2 mm) 35 mm
312
-
-
... More
Supplying & Placing Visitor Chair, Cushion Arm, PU Moulded Seat Back, Chrome Plated Pipe stand Leatherette Tapestry Chair Type Non-Revolving and Non-Tilting chair with Armrest Chair frame type Legs
Armrest type Continuous armrest Seat type Padded Backrest type Padded Frame Material Configuration Two Piece Frame material Stainless Steel (SS 202) Seat material Moulded Plywood Seat material thickness 30 mm Density of Polyurethane foam used in seat (±2 Kg/Cub Meter) 40 Seat upholstered with PU sheet GSM of seat cover (± 3 GSM) 390 GSM Backrest material Moulded Plywood Density of Polyurethane foam used in Backrest ( ±2 Kg/Cub Meter) 32 Backrest upholstered with PU sheet Seat Depth (± 5 mm) 430 mm Seat Width (± 5 mm) 460 mm Seat height from floor surface (± 5 mm) 475 mm Backrest width (± 5 mm) 450 mm Backrest height from seat (± 5 mm) 460 mm Paint Type Chrome Paint Polish Type N.A Colour of Paint N.A Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove the conformity of product to the Specification Yes Test reports to be furnished to buyer on demand Yes
71
-
-
... More
Supplying & Placing workstation table in completely knock down conditions with an overall size 4000mm X 1260mm X 1200mm that is to be assembled at site. The worktop shall be made up of back to back 25mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The top profile shall be in sharing base rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. A pullout keyboard trey shall be provided of 18mm thick Pre-laminated particle board having size 550mm X 280mm. The trey shall be operated on keyboard channel. The top shall be supported on particle board base gable end. The end wall of the top shall be topped by gable end. It should be made up of 25mm thick Pre-laminated particle board and the profile shall be in linear shape with appropriate PVC edge banding. The workstation shall have panel based partition of 60 mm thick with overall height 1200mm. The partition shall be linear in profile and provided in front side of user. The top trim, top bar, mid bar, vertical bar, raceway, skirting shall be made up of aluminium extrusions (pre-treated) and duly powder coated with 40-60µ thick. The trims shall have the size 60mm X 19mm with 1.5mm thick covered with Die cast end caps on joints 2 ways, 3 ways & 4 ways (L-cover for corner, T-cover for middle section wherever required). The aluminium raceway shall be situated below the worktop with an overall size 116mm(H) X 60mm(D) with 1.4 mm cover thickness and 2mm back thickness as per requirement of inlaying the electrical management and carrying the wire horizontally. The exposed vertical and horizontal faces of the frames shall be snap fitted with trims. There shall be soft-board (with fabric) provided at front of the user. Laminated bottom tile shall be situated below the work top. The Partition shall have concealed wire management capabilities and should be engaged for responsive and safe operations of power, telecommunications and data (LAN) and has separate components for electrical, data and telephone cables having adequate capability of both the vertical and horizontal wire movements. Slots/cut-outs should be given on raceways to fix all electrical and data points. Zinc coated small top support brackets shall be fixed on the partition for table top support. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be situated at bottom. Adjustable leveller shoe shall be provided at bottom of the partition to avoid scratches on the floor. Fixed pedestal shall be provided with an overall size 400mm X 450mm X 725mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 4 nos. of drawer having same size. The drawer shall be operated with SS handle and easily close & open with the assistance of roller channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. A nylon castor based CPU unit shall be provided with an overall size 470mm X 286mm with 18mm thick Pre-laminated particle board.
42
-
-
... More
Supplying & Placing Medium Back Chair, PP Arm, Gas Lift, Nylon Base, PU Moulded Seat & Back, PP Seat & Back Cover, Fabric Tapestry Chair mechanism Centre pivot mechanism Type of locking Tilt limiter Number of arm movement N.A,Pedestal Base Chrome plated MS Armrest Material Polypropylene Seat material Pressed and moulded with PU foam Backrest is made of One piece hot pressed plywood with PU foam Density of PU foam used in seat KG per Cu Meter (± 3) 45 Density of PU foam used in backrest in KG per Cu Meter (±3) 40 Backrest upholstered with 100% Polyester Fabric Seat upholstered with 100% polyester fabric GSM/Thickness of fabric 5%(Gram/Square meter) 290 gram Overall width (±10 mm) 590 mm Backrest Height ±15 mm 600 mm Backrest Width ±10 mm 480 mm Seat Height ±10 mm 460 mm Seat Width ±10 mm 460 mm Seat Depth ±10 mm 410 mm,Thickness of MS Plate Joining the under structure with Seat 0.3 mm Thickness of Plywood used in Seat ±1(mm) 12 mm Thickness of Plywood used in Backrest ± 1(mm) 12 mm Pedestal Size (Diameter in mm) ±10 mm 600 mm Thickness of Polyurethane Foam Used in Seat in mm (±2 mm) 30 mm Thickness of Polyurethane Foam Used in Backrest in mm((±2 mm) 30 mm
336
-
-
... More
Supplying & Placing Conference table in completely knock down conditions with an overall size 3600mm X 1200mm X 750mm that is to be assembled at site. The construction of the main table shall be free standing structure constructed with the help of minifix dowels and pins. The table top shall have the size 1800mm X 1200mm made up of 2 nos. of 50mm thick pre-laminated particle board of grade II of IS 12823 with one side laminate and finish as per approved shade. The table top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edgebander machine at 200 0C. The table top shall be supported by particle board base gable end. The end wall of the table on the side shall be topped by gable end. The gable end shall have the size 1050mm X 695mm with 49mm thick and 100mm X 695mm with 18mm thick. The gable end shall be made up of Pre-laminated particle board with appropriate PVC edge banding and covered both side by Aluminium section. The table shall be clad with 18mm thick modesty panel which provide structural support for the desk. The modesty panel shall have an overall size 1200mm X 400mm with 18mm thick pre-laminated particle board connected with both end. There shall be buffers provided to avoid scratches on the floor. The table connections have to be made in such a way that no gap should be seen in between. The manufacturershall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification.The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380.
112
-
-
... More
Supplying & Placing 3 Seater Sofa With SS Arms & Legs, Perforated Seat & Back, Powder Coated Beam Size in mm - 1750(L) X 710(D) X 755(H) SS 304 Style with arm and backrest Seating Capacity (Nos) 3 Material of Main Frame SS 304 Material of Seat and Backrest SS 304 Material of Arms SS 304 Material of Legs SS 304 Material of Side Bar Bracket made up of chrome plated solid steel Overall Length in mm (±10 mm) 1800 Overall Depth in mm ( ±5 mm) 665 Overall Height in mm (±5 mm) 760 Conforming to International Standard for Public Seating (*BIFMA X 5 dot 4 or equvalent) YES All steel component to be epoxy powder coated 60 micron thick
30
-
-
... More
Supplying & Placing Executive Table with Pedestal /Side Storage Unit of Specification:Material of Table Understructure :Particle Board,Availabilty of Modesty Panel:Yes,Table type of Material type:Particle Board,Table top Thickness:25 mm,Length of Table Top:1800 mm,Depth of Table top:750 mm,Height of Table Top Adjustable:No,Material Type of ERU:Particle Board,Width of ERU(Extended Return unit):1050,Depth of ERU(Extended Return Unit):600 mm,Material of Door in ERU:Particle Board,Availabilty of KeyBoard Tray:NO,Type of Material of Finish/Lamination in Table Top:Laminate,Type of ERU(Extended Return Unit):With Storage,End of ERU:With Gable End,Number of shelves in ERU:1,Number of closed compartments in ERU excluding drawers:2,Type of Door in ERU:Sliding Door,Side of Lamination in wooden door of ERU:Double (Top and Bottom sides),Type of Material of Finish/Lamination in wooden Door of ERU:Laminate
1
-
-
... More
Supplying and Placing High Back Revolving Chair with Tilt working with torsion bar with specification Locking mechanism:Up right locking,Seat depth adjustment:Fixed Type,Revolving Mechanism:Designed with 360 degree Revolving type,Pedestal base:Mild steel chrome plated,Minimum thickness (in mm) of MS Plate joining the bracket with seat of the chair:4 millimeter,Seat Material :PU Foam,Density of PU used in Seat(kg per cubic meter):40=50,Thickness of PU Used in seat(mm):50,Minimum seat Height from floor surface(mm)500,width of seat(mm):500,Depth of seat(mm):500,Seat Upholestry material:Latherette,
1
-
-
... More
Supplying and Placing Visitor Chair of Non Revolving and Non Tilting chair with armrest of specification of understructure type:Cantilever,Understructure material:ERW tube confirming to IS:1161 Latest,The shape of tabular section of understructure:Round,Section size(Diameter/sides) of understructure:25 mm,Understructure wall thickness: 2 mm,Castor:No,Seat Material:PU Foam,Density of PU Used in seat(kg per cubic meter):40=50,Thickness of PU used in seat(mm):30=40,Minimum seat Height from floor surface(mm):400=500,width of seat(mm):400=500,Depth of seat(mm):400=450,Seat upholstery Material:Polyester fabric,Backrest base frame material:Hot pressed plywood,Backrest material :PU Foam,Density of PU used in Backrest(kg per cubic meter):40=50,Thicjness of PU used in Backrest(kg per cubic meter):40=50,width of backrest(mm):400=450,Backrest height from the seat level:450=550,Backrest upholstery material:Polyester fabric,Armrest type:Over hanging armrest,Arm rest movement:Fixed
6
-
-
... More
Supplying & Placing 3 Seater Sofa With Wooden Frame, Powder Coated Leg, Twin Colour Leatherette Tapestry Size in mm - 1930 (L) X 790 (D) X 850 (H) Total Number of Seats in the Sofa Set 3 Number of Single Seater Units (Nos) No Single Seater Unit Number of Two Seater Units (Nos) No Two Seater Unit Number of Three Seater Units (Nos) 1 Number of Four Seater Units (Nos) No Four Seater Unit Frame Covering Fully Upholstered Sofa Set is Foldable to use as bed No Backrest Cushion Material Foam Density of Cushion of Backrest Material (Kg/Cubic M) 32 Covering Material for Seat and Backrest Genuine Leather Frame Structure Material and size (±1 mm) 19 mm thick Commercial board Seat Cushion Material Foam Density of Cushion of Seat Material ±3 (Kg/Cubic M) 40 Type of Spring in the Base / Seating Eight way hand tied spring Length of Single Seater Units in mm (±5 mm) 508 Length of Two Seater Units in mm (±10 mm) 1100 Length of Three Seater Units in mm (±10 mm) 1850 Length of Four Seater Units in mm (±10 mm) 2640 Depth of Sofa Units in mm (±10 mm) 775,Sofa Height (Without Back Cushion) ±5 (mm) 430 millimeter Sofa Height (With Back Cushion) ±5 mm 845 millimeter Seat Cushion Length ±5 (mm) 525 Seat Cushion Width ±5 (mm) 710 Seat Cushion Thickness ±3 (mm) 210 Backrest Cushion Length ±5 (mm) 530 Backrest Cushion Width ±5 (mm) 530
10
-
-
... More
Supplying & Placing Centre Table, 12mm Toughened Glass, MS Powder Coated 1200 X 600 X 450 Understructure Number of storage under top No storage Top material Tempered glass Frame material Other wood Dimension of Top (Length X Breadth, or Diameter) ±20mm 1194mmX584mm Height of centre table ±10 mm 460 millimeter Thickness of top material (+/-2 mm) 12 millimeter Thickness of frame material (+/- 1 mm) 12 millimeter
5
-
-
... More
Supplying and Placing Back Storage Unit of specification: 18mm PLPB, Extruded Aluminium Profile W2250 X D450 X H2200,Thickness of shelves:18 mm,Availabilty of doors:Yes,Material of Bottom Section:Particle Board,Side of lamination in Bottom section:25mm,Color family of bottom section:Yellow,Availabilty of buffers:Yes,Type of buffers:studds,Type of lock:Cam locks,Material od side section:Particle board,Finish of exterior/edge:PVC Edge Branding,Availabilty of back section:Yes,Material of back section:Particle board,Thickness of material for back section:18mm,Opening Mechanism of door:Sliding doors,Thickness of frame material od Door:18 mm Wooden,Color family of Door:Yellow with all complete finishings as per direction of E/I.
2
-
-
... More
Providing, supplying and placing in position News Paper / Magazine Stand of Overall Dimensions shall be 900mm(W)x450mm(D)x1850mm(H). Rigid Knockdown construction ,Panels shall be made from CRCA 0.8 mm thick. The front frame shall be made from CRCA 0.8 mm thick . CRCA D grade as per IS 513 . Each unit shall be 5 Retractable Display Metal Tray fixed at an angle for easy viewing. Display tray shall be suitable for fullscape size magazines,periodicals, aesthetically appealing metal tray at an angle for easy viewing . Receding facility to access the storage behind . Sliding on plastic rollers . Behind storage shelving each of 5 level has a behind storage shelf . Uniformly Distributed Load capacity per each shelf is 40 kg . Leveler shall be screw type with hex plastic base and finish shall be epoxy polyester powder coated to the thickness of 50 microns .
4
-
-
... More
Supplying & Placing Steel Almirah, 2 Doors, 4 Adjustable Shelf, Thickness 0.8mm W900 X D 450 X H1830 Technical specification of Almirah steel Generally conforming to BIS specification IS: 3312:2021 (with latest amendment) Type of Almirah steel Almirah Steel shelving cabinets Number of door 2 Number of drawers required No Drawer Number of shelves 4 Colour of finish As per Buyer’s Requirement (to be indicated during bid creation) Steel sheet material CRCA sheets conforming to grade CRI of IS 513(part-1):2016 (with latest amendment) Sheet rounds and flats Conforming to grade E250 of IS 2062 Almirah height(excluding the height of pedestal) ± 5 mm 1980 mm Almirah width ± 5 mm 900 mm Almirah depth ± 5 mm 450 mm Side sheet thickness 0.8 mm Back sheet thickness 0.8 mm Top sheet thickness 0.8 mm Bottom sheet thickness 1 mm Shelves sheet thickness 0.9 mm Shelves supporting bracket thickness 1.6 mm Hinges sheet thickness 1.25 mm(double folded) Hanging rod wall thickness N.A Mirror frame sheet thickness N.A Mirror frame border width N.A Width of stiffener N.A Stiffener sheet thickness N.A Number of glass sheet fixed N.A Handle size 12 cm Steel Almirah lock/locker lock Six lever lock Material of lock Brass and Steel finish Finish coat with enamels Conforming to IS:151 Powder coating Conforming to IS: 13871
73
-
-
... More
Providing, supplying and placing steel almirah. The overall size of the Almirah shall be 900mm (W) X 450mm (D) X 1830mm (H). The Almirah shall be supplied with 2 nos. of glass door and 2 nos. of steel door with adjustable shelves. The door shall be operated with aesthetically appealing snap fit ABS plastic handle and concealed crank hinge. The glass shall be used 4mm thick clear. The shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. Uniformly distributed load capacity of each shelf shall be 40 Kg maximum. Each rack shall be provided with stiffener at bottom for strength. The entire body panel, shelf shall be made of high yield strength 0.8mm thick CRCA sheet of grade ‘D’ confirming to IS: 513. To protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom. The complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-60µ thick.
49
-
-
... More
Supplying & Placing Dining/study Table, Powder Coated Pipe Frame, PLPB Edge Banded Top, 25 mm Thick, Size in mm - 1800 X 900 Shape of Table Rectangular Seating Capacity 6 Material of top Prelaminated board Material of understructure Powder Coated MS,Material of top finish Mica Length of table ±10mm (Diameter in case of Round) 1800 mm Depth of table ±10mm 900 mm Thickness of top in mm (+/- 5%) 25 mm
15
-
-
... More
Supplying & Placing Café Chair, Chrome Plated Pipe Frame, Leatherette Tapestry Chair Armrest Without Type of seat Ply Seat Cushion With Back Rest Cushion with Upholstery Leatherite Material of frame SS 304 Chair height (overall) ±10mm 880mm Backrest width ±10mm 425 Width of seat ±10mm 400 Depth of seat in mm (+/- 10 mm) 400 Height of seat in mm (+/- 5 mm) 400 Seat Finish Cushioned Exposed Wooden / Metal Parts Finish N.A
90
-
-
... More
Supplying & Placing Steel Library Rack (Double Face), Thickness 0.8mm W940 X D600 X H2110 Type CLOSED FROM SIDES ONLY Number of Shelves/Compartments (Top / Ceiling Shelf - not to be counted) 4 Shelves Material 0.8 mm Thick MS Sheet Conforming to Commercial Quality CR-1, Grade 340 of IS 513 Depth in mm (±5 mm) 600 Width in mm (±5 mm) 915 Height in mm (±5 mm) 2000 Paint Powder coated
16
-
-
... More
Supplying & Placing Drinking water palteform Approximate External Dimensions (WXDXH) 750 x 690 x 1420 mm Input Voltage 230 V AC (50 Hz) Power Rating (Max) 850 ± 10% Water Storage Tank Capacity 120 Litre Cooling Capacity 60 LPH Output Water Temperature 15°C±1°C Refrigerant HFC R 134 a Thermal Insulation for Storage Tank PUF No. of Faucets 3 Cold No. of Stages for Filter cum Purifier 7 Active Copper Zinc Booster Yes % of Purified Water Recovery 25% % Rejection of TDS 90% (Approx) Permeate (Purified Water) Production Capacity 50 LPH Storage Tank & Drain Tray Material SS 304 Outer Body Material rest CRCA Powder Coated Steel Front Panel SS 304 and Type of Product Construction Concealed Type of Installation Indoor Net Weight 92 Kg Operating Input Water Pressure 1.0 to 2.0 Kg/cm² Operating Temperature 10°C to 40°C Recommended Total Dissolved Solids in Input Water(TDS) 500 to 2000 ppm.(Max) Recommended Hardness in Input Water 300 ppm(Max) Recommended pH of Input Water 6.5 to 8.5 Allowable Chlorine Input Water 0.2 ppm (Max) Allowable Iron in Input Water 0.3 ppm (Max) Turbidity 5 NTU
10
-
-
... More
Supplying & Placing Mild steel Locker of specification :Material-Mild steel,Material of door :Metal,Type according to the number of lockers:Type 1-Containing 75 lockers,Finish: Paint coating ,Lock type:Dual lock,Confirming to IS 5244:1991,Colour:Silver,Rust proof,Damp proof,water proof,fire proof,scratch proof,Assembled,Adjustable shelves,Termite resistence:Yes
28
-
-
... More
Supplying & Placing Auditorium Chair of specification :Type of Chair Mechanism:Auto Seat Tip up without pushback :MS under structure with integrated Auto tip-up mechanism with suitable welded base plate,chair legs,Chair under structure legs finish:Antirust treatment and poder coated,Fabric:Fabric upholstered seat made of PU Foam backed with 12mm+/-1mm thick moulded plywood with plastic moulded under seat cover,Density of PU Foam for seat:45 kg,Thickness of PU Foam for seat(in mm):50 millimeter,Width of seat in mm:400=500,Actual seat width in mm:450,Depth of seat in mm:505,Seat Uphoistery:Fabric,Density of PU Foam for backrest:45 ,Thickness of PU Foam for backrest :50 millimeter,Height of the backrest:600=500,Actual Backrest Height:689,Width of backrest:400=500,Actual Backrest width:487,Backrest upholstry:Fabric,Color of chair:Red,Side Panel:Made from 1.2-1.6 mm CRAC Sheet,clad with upholstry fabric with suitable foam layer,Arm rest:Independent armrest in aisle side and foldable writing Pad on RHS side in middle seats,Type of Armrest:Plastic moulded
238
-
-
... More
Add 18% GST
18
-
-
... More
Add 1% Labour cess 1%
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%