State Building Construction Corporation Limited Tender
Search from across the categories, cities, and authorities to find the latest Jharkhand tenders. Every Jharkhand tender is curated from credible sources of government websites (eProcurement Jharkhand portal) and newspapers, thus ensuring the credibility of the information presented to you. For more information on Jharkhand tender bidder registration, the login process and more read the FAQs section on this page.
Costs
EMD
₹ 4,68,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_JSBCC_96493_1Tender No
JSBCCL/86/2024-25Tender Authority
State Building Construction Corporation Limited ViewPurchaser Address
-Website
http://jharkhandtenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Providing coarse clean SAND FILLING in foundation trenches or plinth including ramming & watering in layers not exceeding
279.89
-
-
... More
Providing designation 75 Abrick work in C.M (1:6)in foundation and plinth with approved quality of clean coarse sand of F.M2 to 2.5 including providing 10mm thick morter joints , cost of screening materials , raking of joints to 15mm depth , curing taxes and royality all complete as per building specification and direction of E/l
124.89
-
-
... More
Providing designation 75 B BRICK in C.M (1:8) in Superstructure-------do-------
17.93
-
-
... More
Providing 125 mm thick REINFORCED DESIGNATION 75 A BRICK WORK in C.M. (1:4) in SUPERSTRUCTURE with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, cost of materials, racking out joints to 15 mm depth, carriage, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of Engineer Incharge .
114.42
-
-
... More
Providing designation 100A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9" x 4.5" x 3") in C.M. (1:6) in superstructure with approved quality of clean sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.
165.82
-
-
... More
Providing designation 112mm thick reinforced designation 100A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9" x 4.5" x 3") in C.M. (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, carraige of materials, scaffolding, raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforced) all complete as per building specification direction of E/I.
115.92
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)
P.C.C in FOUNDATION
45.82
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
17.05
-
-
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)
27.69
-
-
... More
Providing P.C.C. M-200 with nominal mix (1:3/2:3) in foundation with approved Quality of stone metal grade-III
21.31
-
-
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
61.03
-
-
... More
Providing R.C.C. M-200 in band at plinth level with nominal mix of (1:1.5:3) of approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position vibrating, skirting, curing, (but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of E/I.
166.99
-
-
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)
26.19
-
-
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
124.04
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
703.56
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform
667.69
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers
638.47
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts
332.87
-
-
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
11.05
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Weather shade, Chajjas, corbels etc., including edges
38.79
-
-
... More
Supplying, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows skylights, fanlights and C/W celetial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all completeas per building specification and direction of E/I.
1.69
-
-
... More
Supplying, fitting & fixing 35mm thick solid core type decorative single leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resin of standard make with aluminum fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/I.
81.98
-
-
... More
Supplying, fitting and fixing 35 mm thick solid core type non-decorative single leaf flush shutters in doors and windows with black board core bended with hight quality phenol formal dehydes synthetic resin both side commerical veneered of standered make with oxidised iron fitting -- do -
3.78
-
-
... More
Providing T or steel reinforcement of 8,10 mm, 12 mm, &16 mm dia barsas per approved design and drawing excluding carriage of bars to work site, cutting, bending and binding with annealed wie with cost of wire, removel of rust, placing the rods in position all complete as per building specification and direction of E.
-
-
-
... More
providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL)
15.9
-
-
... More
providing Tor steel reinforcement of 10mm dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.
8.85
-
-
... More
providing Tor steel reinforcement of 12mm dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.
11.75
-
-
... More
providing Tor steel reinforcement of 16mm dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.
4.79
-
-
... More
providing Tor steel reinforcement of 20mm dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.
1.69
-
-
... More
Supplying, fitting & fixing M.S. GRILL made of 20 x 6 mm flat as per approved design and drawing properly fabricated with joints continuous fitted, welded and finished smooth, hoisting as per building specification and direction of E/I.
5981.87
-
-
... More
Providing and fixing fan hook of 16 mm dia M.S bar 1 metre long bent to requried size and shape placed in position and fixed in R.C.C slab / beem at the time of casting all complete as per building specification and direction of E.I
(where materials is not supplied by the deptt.)
12
-
-
... More
Supplying fitting and fixing callapsible gate of approved size and make properly fabricated with vertical double channels 20x10x2 mm at 100 mm. Centers and braced with M.S flate diagonals 20x3 mm with top and bottom rails of T. Iron 40x40x6 mmwith 38 mm dia steel pulleys complete with bolts , nuts, locking arrangements stoppers, handles, including applying a priming coat of red lead paint, carrige, hoisting and taxes all complete as per building specification and direction of E.I
1.89
-
-
... More
drilling 6mm dia holes . M.S angle iron for fixing of staples etc . As per building specification snd direction of El
306.85
-
-
... More
Labour for fabricating, erecting, hoistion and fixing in position structrral steel work in R.S. Joist, channel, Angle, Tee, flat, plate, latice member, built up compound section in column, girder, stair case, or truss including cost of gusset plates, holding down bolts, anchor plates at all heights and depths, bolting, welding ( machining wherever necessary) with applying a priming coat of red lead paint all complete as per approved drawing, building specification and direction of E/I.
1.77
-
-
... More
supplying , fitting and fixing M.S gril / RECTANGULAR PIPE made of 20x6cmm M.S. FLA asper approved design and drawing , and properly fabricated with joints continous fillet welded and finished smooth , carriage of grill to work site , hoisting as per building specification and direction of E / WHERE A MATERAIL is not supplied in by the deptt
1231.2
-
-
... More
Providing designation 75B one BRICK FLAT SOILING joint filled with local sand including cost of watering taxes royalty all complete as per
833.66
-
-
... More
Supplying and laying (properly as per design and drawing ) rip -rap with good quality of boulders duly packed including the cost of materials.
72
-
-
... More
Providing and laying hydraulically machine pressed terrazo tiles 20mm thick of approved texture with down marble chips of approved shade, size and quality, laid on 19mm. Thick bed of lime mortar (1:1:1:) (lime: surkhi :sand) with neat cement slurry mixed with pigment to match the shade of tiles between joints, including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing , royalty and taxes all complete as per building specification and direction of E/I.
-
-
-
... More
(a) Grey colour with 100% ordinary cement
164.7
-
-
... More
Providing and laying 25mm thick KOTA STONE in risers of steps, skirting and pillers of approved quality over 12mm thick base of cement mortar (1:3) and jointed with white cement slurry including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I.
25.97
-
-
... More
Providing and laying 20mm thick white makrana Marble Stone slab flooring of approved quality over 19mm thick base of lime mortar (1:1:1) (Lime putty surkhi coarse sand) laid and joined with white cement slurry including rubbing and polishing -------do-------
(II) 300x600mm size
51.71
-
-
... More
proved and laying 6mm .precast white glazed tiles in wall over 12mm .cement morter (2:3)and jointend with grey cement slurry flush pointed with white cement including rubbing ,polisingand cost of curing taxes ,and royalty all complete as per building specification and direction of
-
-
-
... More
with "A"grade white 15x15cm .tiles
52.81
-
-
... More
Providing and laying 6 mm . precast white Glazed Tiles in walls over 12 mm . cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing, polishing and cost of curing taxes , and royalty all complete as per building specification and direction and of E/I .
115.31
-
-
... More
For Stair
Providing and laying vitrified floor tiles for step of stair in with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete step tiles & have bullnose, Anti and self embossed line. Size of Tile 1200x300 mmx15 mm
35.19
-
-
... More
Providing and laying Double Charge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 300x300x10 mm
831.35
-
-
... More
Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I.
283.52
-
-
... More
Providing 12mm thick cement plaster (1:4) in WALL with materials ---do --- complete job as per specification and direction of E/I.
1040.55
-
-
... More
Providing 12mm thick cement plaster (1:6) in WALL with materials ---do --- complete job as per specification and direction of E/I.
2125.29
-
-
... More
Providing 6 mm thick cement plaster (1:4) in Celling with clean coarse sand of F.M. 1.5 including screening, curing with all lead and
557.1
-
-
... More
Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I.
346.67
-
-
... More
Extra for Design Plastering done on molding cornices or architraves including neat finish to line and levelon top roof
235.7
-
-
... More
Making 6x6 mm grooves in plaster surface over walls truely horizontal or vertical as specified at regular intervals at all hights including cleanning, finishing, scaffolding, and curing with all leads and lifts of water all complete as per building specification and direction of E.I
24.71
-
-
... More
Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I..
1577.61
-
-
... More
Providing two coats of Plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I. (OUTSIDE & INSIDE WALL)
645.53
-
-
... More
Providing and applying snowcem 2mm thickness over plastered surface to prepare the surface even and smooth complete
731.64
-
-
... More
Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface
232.95
-
-
... More
Providing two coats of Synthetic ENAMEL PAINT of approved shade and mack and one coat of over new STEEL surface including cleaning the
70.81
-
-
... More
Providing two coats of synthetic enamel paint of apporoved shade and make over steel surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I.
303.76
-
-
... More
Providing single layer Naria- tiles in roof including cost of all labour and materials, taxes, all coplete as per building specification and direction of E/I.
119.1
-
-
... More
Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.
326.08
-
-
... More
Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.
1408.6
-
-
... More
Taking Down Chaukhats in Door including -do-
3
-
-
... More
Taking sown Chaukhats in Windows including -do-
14
-
-
... More
Providing 250mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.
57.27
-
-
... More
Water proofing for Old and Now Roof Slab • Providing and laying water proofing treatment on roof slab by applying two Component, factory designed, ready to use, acrylic modified flexible material applied wth brush, roller or spray for water proofing coating as Per ....Mier specificatIons with following steps (a)surface preparation -Providing and cleaning o1 concrete ...lece le remove dust, oil, grease including removal of existing loose paint r coating, and cement laitance by cleaning with comer..ed air 8 water let including all materials, labour, tools complete Ponding test to be done after plugging all outlets and to be checkedtrodentify seepage eakage On identification of seeps cem t be done with non shrink expanding admixt e a Ind, t 1MYK c g / Dr Fout/Fosroc or equive teems such as those betwe be chamfered with 15 1 41 admixed with ac Fixit or equivalent slum, of acrylic concretein base rovtartg and repaving of all c arapet wall and the roof slab et 50 mm fillet of mortar (Cement sand mer of Sika/ Fosroc/MYK SchomberglDr chamfering a prime coat shall be given with the Repairing surface irregularities, damaged ad cracks if any, with an acrylic polymer modified repair moile, including a coat of bonding agent of the same with cement slurry inctC01; all material, labour, tools complete (b)1st Coat - APOrlit coat of two component acrylic modified, ready to use. flexible come s material on surface saturated dry roof and inside wall of Par ll upto 600 mm by brush or roller After 1st coat re. pgplaisesd c@lot,h5t: kla9y,sw,nheincothaet rost, itahyee r of application , 45 still green 1st coat purpose of measure he entire treated surface will be measured "4, (c) 2nd Coat -To apply g02 coat of two component acrylic rnorAdmir* ready to use, flexible come' tonal right angle to the 140,af,•:,-- over the glass fibre laid surface*d alepld be * applied VW Sgmt/coat For the purpose of rnikeSCiretfleritthe entireteaterfstiface will be measured " After three days of drying the 2nd coat , the rain water outlets to be plugged and ponding test to be done for 48 hours to identify seepage, leakage from soffit and found necessary rectification to be done as per satisfaction of E/C The waterproof coating to be protected from damage before screed over it Water proofing Brand - Sika Topseal 109hi / Fosroc Brushbond RI". Dr Feet Picliflin 2K 1 MYK Actuate' TG Product Performance Chemical Base F'. A Acrylic copolymer, Part B: Specially graded cementitious powder -D011,4 1.6 fief, (mixed density) at 427°C Tensile Strength -2 N/mm2 atter 28 days (with Fibre cloth) (According to ASTM D 2370) Pullout Bond Strength -2 N/mm2 (concrete failure) (According to ISO
483.42
-
-
... More
Covering of treated surface with PCC .- Providing 25 mm thick Cement Alf, Concrete M20 1:1. :3) maintaining slope in alternate 2 mt x 2 mt panels
with aaprove. .,..• of stone chips of 20 mm to 6 mm size graded and cleaned sand 2.5 to 3 including screening,shuttering,and mixing cement concret . fixer with admixture of integral water proofing and
placing in posi . ing curing,taxes and royality all complete as per building specifi nd direction of Ell. Panels that has been left shoul be casted next dysThere should be 6 mm gap between Panels .Brand Sika _Plastocrate Aus,MYK proof WP10, Fosroc- Conplast X421 lc& Dr Fixit Pidiproof LW+
483.42
-
-
... More
Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with Integral water proofing compound Liquid @125 ml per bag cement including screening, curing
405.19
-
-
... More
Providing and filling of 6 mm thick Groove between 25 mm PCC Panels with Polysulphide Sealant (Poring Grade)as Per drawings and technical specifications and direction of E in Charge (with 18% GST Polysulphicle Fosroc-Thoflex 600.Dr Fixit Pidiseal PS(42P) !MraYndK -Seikaal PS or Euivalent
92.04
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels
Granite stone slab colour black, Cherry/Ruby red
Area of slab upto 0.50 sqm
59.09
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished,
premoulded and prepolished, machine cut for kitchen platforms, vanity
counters, window sills, facias and similar locations of required size,
approved shade, colour and texture laid over 20 mm thick base cement
mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,
mixed with matching pigment, epoxy touch ups, including rubbing, curing,
moulding and polishing to edges to give high gloss finish etc. complete
at all levels.
16.5
-
-
... More
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium
Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the
building , for all heights and all levels etc. including:
(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain
screen principle as required, proper drainage of water to make it watertight including checking of
all the structural and functional design.(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding
in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite
panel material consisting of 3mm thick FR grade mineral core sandwiched between two
Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil
coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved
colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using
stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations
and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts
of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete
required to perform as per specification and drawing The item includes cost of all material &
labour component, the cost of all mock ups at site, cost of all samples of the individual
components for testing in an approved laboratory, field tests on the assembled working curtain
wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with
aluminium composite panel cladding till the handing over of the building for occupation. Base
frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall
provide curtain wall with aluminium composite panel cladding, having all the performance
characteristics all complete , as per the Architectural drawings, as per item description, as
specified, as per the approved shop drawings and as directed by the Engineer-in-Charge.
However, for the purpose of payment, only the actual area on the external face of the curtain wall
with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm.
up to two decimal places.
260.87
-
-
... More
50mm thick factory made soiled both side Prelaminated Panel PVC Chowkhat shutter consisting of frame made out MS tube of 19 guage thickness as per your size .
64.35
-
-
... More
30mm thick factory made soiled both side Prelaminated Panel PVC door shutter consisting of frame made out MS tube of 19 guage thickness as per your size .
9.45
-
-
... More
Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of
19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S.
frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5
mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall
be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm
wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner
side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm
shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of
the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail &
bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to
the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and
joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be
stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of
Engineer-in-charge, manufacturer's specification & drawing.
11.03
-
-
... More
Casement window double panels with French (False) Mullion with S.S. 304 fricction hinges as per size and wieght of sash,multi-point locking system,zinc alloy (zamak) power Coated handal
-
-
-
... More
Using R3 series with frame (55mm& above)x (45mm& above) & sash (55mm& above) x(65mm&above) & French (Flase) mullion (55mm& above) x(65mm&above). (Height upto 1.8m)
49.18
-
-
... More
Supplying, fitting and fixing good quality in chaukhat in doors, windows
27
-
-
... More
Supplying, fitting and fixing good quality in chaukhat in doors, windows
87.95
-
-
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
Hot finished seamless type tubes
1199.66
-
-
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
442.4
-
-
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
6.74
-
-
... More
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.
105.89
-
-
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal
ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,
(i) Single socketed pipes.
-
-
-
... More
75 mm diameter
300
-
-
... More
100 mm diameter
327.93
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to
IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
... More
75 mm Coupler
27
-
-
... More
110 mm
50
-
-
... More
Single tee with door 110x110x110 mm
33
-
-
... More
Bend 87.5°
60
-
-
... More
Shoe (Plain
69
-
-
... More
Providing and fixing unplasticised -PVC pipe CLIPS of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement
: 4 coarse sand) and making good the wall etc. complete.
-
-
-
... More
75mm dia
34
-
-
... More
110 mm dia
77
-
-
... More
Providing and applying plaster of paris putty of 2 mm thickness over
plastered surface to prepare the surface even and smooth complete.
546.7
-
-
... More
Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm)
over and including priming coat of exterior primer applied
@ 2.20kg/10 sqm
831.45
-
-
... More
Providing and applying white cement based putty of average thickness
1 mm, of approved brand and manufacturer, over the plastered wall
surface to prepare the surface even and smooth complete.
1898.72
-
-
... More
Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting
masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm
with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal
size), painting two coats of approved wood preservative to sides of chowkhats and making good
the damages to walls and floors as required complete, including disposal of rubbish to the
dumping ground, all complete as per direction of Engineer-in-Charge.
28
-
-
... More
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating
earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including
making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead
upto 50 metres.
418.47
-
-
... More
Providing and fixing G.I. chain link fabric fencing of required width in
mesh size 50x50 mm including strengthening with 2 mm dia wire or
nuts, bolts and washers as required complete as per the direction of
Engineer-in-charge
637.31
-
-
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks,
lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of
sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer
through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver
blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction
of Engineer-in-Charge.
1569.84
-
-
... More
Providing and fixing wash basin with C.I. rackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, ncludingpainting of fittings and brackets, cutting and making good the walls wherever require :
-
-
-
... More
White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm
C.P. brass pillar taps
5
-
-
... More
Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms.
5
-
-
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour weighing not less
than 105 gms.
5
-
-
... More
Providing & fixing PTMT towel ring trapezoidal shape 215 mm long 200 mm wide with minimum distance of 37 mm from wall face with concealed fittings arrangement of approved quality and colour weighing not less than 88 gms
5
-
-
... More
Providing and fixing CPVC pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mt spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge.
Internal work -Exposed on Wall
-
-
-
... More
20 mm nominal outer dia pipes
10
-
-
... More
25 mm nominal outer dia pipes
50
-
-
... More
32 mm nominal outer dia pipes
38
-
-
... More
40 mm nominal outer dia pipes
35
-
-
... More
Providing and fixing CPVC pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mt spacing. this includes jionting of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the wall same including testing of joints complete as per the direction of engineer incharge
Concealed work including cutting chases and making good the wall etc.
-
-
-
... More
15 mm nominal outer dia pipes
35
-
-
... More
20 mm nominal outer dia pipes
25
-
-
... More
25 mm nominal outer dia pipes
10
-
-
... More
32 mm nominal outer dia pipes
5
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflowpipes but without
fittings and the base support for tank.
2000
-
-
... More
Providing and fixing C.P. brass bib cock of approved quality confirming to
IS:8931
5
-
-
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 a) 15 mm nominal bore.
-
-
-
... More
15 mm nominal bore
14
-
-
... More
Supplying and fixing C.I. cover without frame for manholes : 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg
8
-
-
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey
comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long
complete as per standard design.
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
4
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and Is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top....
Anodised aluminium
295.68
-
-
... More
Providing and fixing glazaing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket …..
With float glass panes of 4.0mm thickness
55.12
-
-
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying
cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253
kg/ sqm. This layer will be allowed to air cure for 4 hours.
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @
0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes
and masonry with polymer mixed slurry.
3.84
-
-
... More
cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing
cement compound @ 0.253 kg/sqm.
(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre
cloth should not be less than 10 cm.
(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water
proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to
air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm
on parapet wall and tucked into groove in parapet all around.
119.1
-
-
... More
Providing & Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone Pattern with anti algae and UV resistance properties to be applied as intermediate finish in desired
pattern @ 43.04 kgs/10 sqm to form film of 1- 1.5 mm thickness after scrapping and properly cleaning the surface to remove loose particles from the plaster surface, followed by top coating with Premium Acrylic Smooth exterior paint with Silicone additives of required shade by two or more coats @ 1.43 litres/10 sqm, complete as the direction of Engineer -in-Charge .
609.17
-
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.
200 mm nominal size dia
75
-
-
... More
Development of tube well in accordance with IS : 2800 (part I) andIS: 11189, to establish maximum rate of usable water yield withoutsand content (beyond permissible limit), with required capacity aircompressor, running the compressor for required time till well isfully developed, measuring yield of well by "V" notch method or anyother approved method, measuring static level & draw down etc. bystep draw down method, collecting water samples & getting testedin approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessoriesetc., all as per requirement and direction of Engineer-in-charge
6
-
-
... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:
200 mm dia
6
-
-
... More
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.
200 mm clamp
6
-
-
... More
Carriage of materials from source to site work including loading & unloading all complete job as per specification and direction of E/I
-
-
-
... More
extra crriage up to 1km
1419.08
-
-
... More
extra crriage up to 2 kg
268.69
-
-
... More
SAND
853.55
-
-
... More
CHIPS
436.68
-
-
... More
BRICK
87.32
-
-
... More
Fly Ash
72.88
-
-
... More
Boulder
72
-
-
... More
Earthwork in excavation(As per I.S. 3114/1965 for laying of different types and sizes of pipe so as to give one meter average cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per specification and direction of E/I.
(a) For classification of soil item - A ( 20 x 0.6 x 0.6 )
50.6
-
-
... More
Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification for soil item-A& B
50.6
-
-
... More
Providing and fixing male ended 15mm dia brass bib cock ---------all complete as per direction of E/I.
12
-
-
... More
Providing and fixing brqass/C.I. stop cock of approved quality allcomplete as per specification and direction of E/I.
(A)BRASS STOP COCK (a) 15mm dia.
5
-
-
... More
Providing and fixing G.M. full way valve --------------------- all complete as per direction
-
-
-
... More
(C) 25mm dia weight not less than 1.5 kg.
2
-
-
... More
(d) 32mm dia weight not less than 1.5 kg.
3
-
-
... More
Supplying fitting and fixing the following items complet with all material s as per direction of E/I.
-
-
-
... More
(i) 600X125mm glass shelf complete
5
-
-
... More
(b) (i) 600x450mm mirrors of 6mm thick.,
8
-
-
... More
©(iii) C.P. brass soap dise contineer medium a good quality with screw and hinge etc.
9
-
-
... More
supply materials labour for constraction of 600x600x900mm stop cock chamber of brick masonary.
10
-
-
... More
Supplying, fitting and fixing vitreous white glazed earthen ware
I.W.C. Of parry Hindustan or any other I.S.S. Approved make with 100mm H.C.I. 'P' trap 15liters C.I. Pull and let go flushing cistern of names or other I.S.S. Equipment make, complete with all fittings,
C.I. or C.C. brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pert of vitreous white glazed earthenwere were footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less than 50grms, 15mm
P.V.C. connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide
primer etc. all complete as per specification and direction of E/I.
(A) 580 mm long
(a) With 10ltr low level PVC cistern
11
-
-
... More
Supplying fitting and fixing 40mm high vitreous white glazed earthen E.W.C. With 'P' trap of parry hindustan or any other approved I.S.S. Make including supplying and fixing 15 litres C.I. Mosquito proof low down flushing cistern of approved make with complete fittings With C.I. handle and R.S. or bracket with telescope flush pipe with brass coupling and plumbers joints spindle stop cock of approved uality weight not less than 450grams 15mm P.V.C. alkathene pipe 45cm long with brass coupling at both ends and white/ black plastic solid state seal and lead of commander/cuckoo or other I.S.S. make with hinges or screws etc. painting pipe and cistern etc. with 2 coats of approved pain over a coat of red oxide priming all complete as per specification and
direction of E/I.
4
-
-
... More
Supplying, fitting and fixing flat back or angular,lipped front vitreous white glazed earthen ware Urinal (Boys ) of Hindustan Parry or any other I.S.S approved make with 5 litres C.I automatic flushing cisterns of reliance for any other I.S.S approved make wihall fittings with C.I or R.S brackets, standered sizes G.I.flush pipe with fitting clamps, 15mm C.I body brass spindle stop cock of approved quality weight not less than 400grams, 15mm P.V.C / Alkthene pipe 450mm long with brass coupling at both ends and doing plumbers joints including painting of exposed part with two coats of approved paint over a priming coat of red oxide, cutting wall and floor, making good the same rtc. all complete as per specification and direction of E/I.
4
-
-
... More
Supplying fitting and fixing vierous white glazed eathan ware Indian Squating size 600mmx350mm urinal plate ----------------------- all complete as per direction of E/I.
(B) URINAL 450MMX350MM SIZE (SMALL)
-
-
-
... More
(B) URINAL 450MMX350MM SIZE (SMALL)
12
-
-
... More
(A) Flat back or standing corner (600mm x 350mm) size (large)
5
-
-
... More
Supplying fitting and fixing vitreous white glazed earthen ware wash hand basin of Parry Hindustan or any other I.S.S approved make supported on painted C.I or R.S brackets 32mm C.I brass waste, 15mm dia C.I body brass spindel stop cock of approved quality of weight not less than 350 grams, 32mm PVCwaste pipe 750 mm long with brass coupling at one end and making plumber joints etc . all complete as per specification and direction of E/I.
11
-
-
... More
Making holes in walls for laying H.C.I. pipes and restoring the same after pipe laying as per specification and direction of E/I.
-
-
-
... More
(i)125mm thick wall
6
-
-
... More
(ii)250mm thick wall
20
-
-
... More
Supplying materials and labours for constructing inspection chamber of designation class 75B bricks size 750mm deep, 600 x 450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600 x 475mm G.I. Cover with frame (weight not leaa than 36 kg) alongwith earth work in exacavation and 80mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per specification and direction of E/I.
16
-
-
... More
Point wiring in PVC conduit, with modular type switch:-Wiring for light point/fan point/exaust fan point / callbellpoint with 1.5sq.mm FRPVC insulated copper conductor single core cable in surface/recrssed PVC conduit,with modular type switch, modular plate, suitable size G.I. box etc.as required.
-
-
-
... More
Group B
132
-
-
... More
Group C
148
-
-
... More
Power plug wiring in PVC conduit (2x4 sq.mm):-Power plug wiring in PVC conduit (2x4 sq.mm):- Wiring for light / power plug with 2x4 sq.mm FR PVC insulated copper conductor single core cable in surfface / recessed PVC conduit along with 1 Nos. 4 sq.mmFR PVC insulated copper conductor single core cable for loop earthing as requried.
380
-
-
... More
Wiring for light/ power plug with 4X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit alongwith 2 No 4 sq. mm FR PVC insulated copper conductor single core cable
for loop earthing as required.
24
-
-
... More
Circuit /sub main wiring in PVC conduit :-
Wiring for circuit / sub main wiring along with earth wire with the following size PVC insulated copper conductor ,single core cable in surface /recessed PVC conduit as requried.
-
-
-
... More
2x1.5 sq.mm + 1x1.5 sq.mm earth wire
577
-
-
... More
2x2.5 sq.mm + 1x2.5 sq.mm earth wire
868
-
-
... More
2x4.0 sq.mm + 1x4.5 sq.mm earth wire
679
-
-
... More
2x6.0 sq.mm + 1x6.0 sq.mm earth wire
125
-
-
... More
2x10 sq.mm + 1x10 sq.mm earth wire
250
-
-
... More
4x2.5 sq mm + 2x2.5 sq mm earth wire
45
-
-
... More
4x10 sq mm + 2x6 sq mm earth wire.
35
-
-
... More
Supplying and fixing of following sizes of PVC conduit along with the accessories in surface/recess including cutting the wall and making
good the same in case of recessed conduit as required.
-
-
-
... More
20mm dia
35
-
-
... More
25mm dia
75
-
-
... More
S/V PVC/ G.I. boxes :- Supplying and fixing PVC/G.I box of following sizes on surface or in recessed with sutiable size of phenolic laminated sheet cover infront including painting etc as requried.
-
-
-
... More
75 mm x 75 mm x 50 mm deep / (4" x 4" )
91.2
-
-
... More
72 mm x 146 mm x 48 mm deep / (4" x 7" )
86
-
-
... More
210 mm x 206 mm x 48 mm deep / (10" x 12" )
36
-
-
... More
S/F Modular type switch / socket :-
Supplying and fixing following modular type switch /socket on the existing modular plate and switch box including connection but exculiding modular plate etc.as requried.
-
-
-
... More
5/6 amps, one way switch
124
-
-
... More
15/16 amp one way switch
20
-
-
... More
5/6 amps, 3 pin socket outlet
78
-
-
... More
5/16 amp 6 pin socket outlet
20
-
-
... More
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding
modular plate etc. as required.
46
-
-
... More
Supplying and fixing modular blanking plate on the existing modular
plate & switch box excluding modular plate as required.
63
-
-
... More
S/F light plug point with piano type accessories :
Supplying and fixing sutiable size G.I./PVC box on surface or in recessed with phenolic laminited sheet cover in front including providing and fixing 5 pin , 5/6 amps socket outlet and 5/6 amps piano type switch connection , painting etc, as requried.
11
-
-
... More
S/F lpower plug point with piano type accessories
Supplying and fixing sutiable size G.I./PVC box on surface or in recessed with phenolic laminited sheet cover in front including providing and fixing 6 pin , 15/16 amps socket outlet and 15/16 amps piano type switch connection , painting etc, as requried.S/F lpower plug point with piano type accessories :-
6
-
-
... More
S/F lpower plug point with modular type accessories
Supplying and fixing sutiable size G.I./PVC box on surface or in recessed with phenolic laminited sheet cover in front including providing and fixing 6 pin , 15/16 amps socket outlet and 15/16 amps piano type switch connection , painting etc, as requried.S/F lpower plug point with modular type accessories :-
5
-
-
... More
S/F power plug point with modular type accessories :- Supplying and fixing sutiable size G.I. box with modular plate cover in front on surface or in recessed including providing and fixing 6 pin , 15/16 amps modular socket outlet and 15/16 amps modular switch connection , painting etc, as requried.
51
-
-
... More
S/F celling rose :- Supplying and fixing 2 pin 5 amp. Celling rose on the existing junction box/ wooen block including connection etc. as requried. S/F celling rose :-
123
-
-
... More
S/F Batten holder :-
Supplying and fixing battrn / angle holder including connection etc as requried.
97
-
-
... More
ITC fluorescent fitting directly on surface :-
Intallation testing and commissioning of pre wired fluorescent TUBE fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on celling / wall including connection with 1.5 sq. mm. FR PVC insulated copper conduit as requried.
45
-
-
... More
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable, etc. as required.
46
-
-
... More
ITC Exhaust fan upto 450 mm. sweep:-
18
-
-
... More
Installation of exhaust fan upto 450 mm. sweep in the existing opening, including making the holeto suit the size of the above fan, making good the damage, connection, testing, commissioning etc as required.
-
-
-
... More
16 amps, double pole
7
-
-
... More
32 amps, double pole
10
-
-
... More
63 amps, double pole
3
-
-
... More
32 amps, TP&N
3
-
-
... More
S/F HRC fuse type TP&N switch disconnector:-Providing and fixing following capacity doble pole / TP&N sheet metal switch disconnector fuse unit in existing metal board, with ISI marked HRC fuses, including drilling holes in metal board, making connections, etc as requried.
-
-
-
... More
200 amps, TP&N, HRC
5
-
-
... More
400 amps, TP&N, HRC
3
-
-
... More
S/F Busbar chamber :-
Providing and fixing following capacity busbar chamber with 4 strips of sutiable size made of copper, heavy duty, complete with all accessories including connections, earthing the body, etc as requried. 400 amps
3
-
-
... More
S/F Panel montude change over:-
Providing and fixing following capacity 4 pole panel mounted change over switches in existing cubcile panel board, making connection earthing the body etc as requried.
3
-
-
... More
S/F S.P. MCB DB :Supplying and fixing following way single pole nutral , sheet, MCB dstribution board , 240 volts ,on surface/recess, complete with tinned copper busbar,nutralbusbar, earth bar,din bar, detachable gland plate,interconnection, phosphate and powder painted including earthing etc.as required.(But without MCB/RCCB/Isolator)
-
-
-
... More
4way,Single door
7.5
-
-
... More
6way,single door
7
-
-
... More
8 way , single door
12
-
-
... More
4way, Double door
13
-
-
... More
16way,Double door
6
-
-
... More
Supplying and fixing following ways, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
4way (4+12), Single door,Horizontal type
7
-
-
... More
8 Way (4+24), Double Door Horizontal Type
4
-
-
... More
S/F 'B'serise, s.p.MCB:- Suppling and fixing 6amps to 32 amps rating , 240 volts, 'B' series, miniature circuit breaker suitable for lighting and other loads of folling poles in the existing MCB DB complete with connections, testing and commissioning et. as requried.
-
-
-
... More
6/32amps, single Pole,"B" serise
12
-
-
... More
S/F 'C' serise, MCB:-
Suppling and fixing ,240 volts "C"serise miniature circuit breaker suitable for inductive loads of follong poles in the existing MCB DB complete with connections, testing and commisioning etc. as required .
-
-
-
... More
6/32 amps, Single pole
54
-
-
... More
6/32 amps, SPN
4
-
-
... More
40 amps, DP
5
-
-
... More
40 Amp TPN
9
-
-
... More
Supplying and fixing Single pole blanking plate in the existing MCB DB
complete etc. as required.
72
-
-
... More
Supplying and fixing of following rating double pole ( Single pole & neutral), 240 volts, resudual current circuit breaker (RCCB), having a sensivity current 30 miliampere in the existing MCB DB complete with connections, testing & commissioning etc as required.
-
-
-
... More
16/25 amps
4
-
-
... More
40 Amps
6
-
-
... More
Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
8
-
-
... More
P/F M.V. danger notice plate:- Providing and fixing M.V danger notice plate of 200mm x 150mm, made of mild steel, at least 2mm thick and vitreous enamelled white on both sides and with inscription in single red colour on front side as requried.
4
-
-
... More
Copper earth plate electrode:-
Earthing with copper earth plate 600mm x 600mm x 3mm thick including accessories, and providing masonary enclours with cover plate having locking arrangrment and watering pipe etc .as requried .(But with out charcoal or coke and salt).
2
-
-
... More
S/L 8 SWG copper wire in ground:-
Suppling and laying 8SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including soldring as requried.
120
-
-
... More
S/L 25mm x6mm G.I. earth strip in ground :-
Supplying and laying 25mm x6mm G.I. strip at 0.50 metre below ground as strip earth eletrode, incoluding soldering etc .as requried.
140
-
-
... More
P/F G.I lighting conductor finial :-
Providing and fixing of lighting conductor finial, made of 25 mm dia 300mm long, G.I tube, having single prong at top, with 85 mm dia 3 mm thick G.I base plate including holes etc as rqquried.
1
-
-
... More
Reverting sweating and soldring lighting conductor tape:-Reverting sweating and soldring of copper / G.I tape (with another copper/ G.I tape, base of the final or any another metalic object) as requried.
10
-
-
... More
P/F G.I lighting conductor tape in vertical run :-
Providing and fixing G.I tape 20 mm x 3 mm thick on parapet or surface of wall for lighting conductor complete as requried.( for horizontal run ).
20
-
-
... More
P/F Testing joint for G.I lighting conductor :-
Providing and fixing testing joint, 20 mm x 3 mm thick copper strip 125 mm long , with 4 nos. of G.I bolts, nuts, check nuts and spring washers etc. complete as requried.
6
-
-
... More
P/F coppre earth tape for lighting conductor :-Providing and laying copper tape 32 mm x 6 mm from earth electrode directly in ground as requried.
20
-
-
... More
Supply, Installation, Testing and Commissioning of following size fan 3 Blades confirming to IS:374:2019 including wiring the down rods of stranded for 230 V 50 Hz, single phase supply etc. complete as
required
-
-
-
... More
1200MM (48")Ceiling Fan
22
-
-
... More
1200 mm ( 48") BLDC 5 Star rating 32W Ceiling Fan
16
-
-
... More
S.I.T.C of following rating surface mounted LED Tube Lighting Fitting
Suitable for 230V 50 Hz, Single Phase Supply etc. complete as
-
-
-
... More
10/12 W LED Tube Light
40
-
-
... More
20/22 W LED Tube Light
30
-
-
... More
LED Post Lamp Garden Light 40/45 watt
10
-
-
... More
SITC LED BOLLARD LIGHT CYLINDRICAL SHAPE
41
-
-
... More
Supplying and stacking of good eaeth at site including royalty and carriage up to 1 kg
214.95
-
-
... More
Supplying and stacking of well decayed cow dung manure at site including loading unloading and carriage for 1km lead.
53.74
-
-
... More
Fine dressing the trenched ground including breaking clods (40.0% area of total)
477.67
-
-
... More
Spreding of sludge dump manure or / and good earth in required thickness including carriage thickness including carriage of materials for lead upto 500m and loading unloading and stacking as per direction of Engineer in charge (cost of sludge dump manure or/and good earth to be paid separately) (qty 5+7)
268.69
-
-
... More
Grassing with 'Doob' grass including watering and maintenance of the lawn for 30 days ar till the grass froms a thick lawn free from weeds and fit for mowing including supplying good earth if needed (the good earth shall be paid for separately).
290.75
-
-
... More
Digging holes in ordidinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1by valume(2parts of stacked volume of earth after reduction by 20%:1part of stacked volume of manure after reduction by 8%)flooding with water ,dressing including removal of rubbish and surplus earth ,if any with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separatly )
844
-
-
... More
providing and fixing neelgiri /mexocan grass turgf with earth 50mmto 60mmthickness of existing ground prepared wirh propal level and ramming with required tools wooden (dhurmos )and than rolling the surface with light roller make the surface smooth and even ,watering with sprinkler .
290.75
-
-
... More
Copper earth plate electrode:-
Earthing with copper earth plate 600mm x 600mm x 3mm thick including accessories, and providing masonary enclours with cover plate having locking arrangrment and watering pipe etc .as requried .(But with out charcoal or coke and salt).
1
-
-
... More
S/L 8 SWG copper wire in ground:-
Suppling and laying 8SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including soldring as requried.
20
-
-
... More
S/L 25mm x6mm G.I. earth strip in ground :-
Supplying and laying 25mm x6mm G.I. strip at 0.50 metre below ground as strip earth eletrode, incoluding soldering etc .as requried.
20
-
-
... More
Providing and disply of Araucaria cookie plant of 3 ' -3 1/2 ht . Straight. Fresh and healthy lush green leaves from bottom to top ,well development , in 12" E/ pots &as per direction of the officer - in charge.
30
-
-
... More
Providing and displaying of Areca Palm plant, having ht. 1.80 m to 2.10 m with 8 to 10 suckers, well developed, fresh and healthy with lush green foliage in 30 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.
40
-
-
... More
Providing and disply of Croton Petra Bangalore plant of ht 3 to 4' with 3-4 branch full of fresh and heathy leave well development in 10" E pots &as per direction of the officer - in charge.
40
-
-
... More
Providing and displaying of Livistona palm plant, having ht. 60 cm to 75 cm, well developed
with 8 to 10 leaves, fresh & healthy foliage in 30 cm size of Earthen pot/Plastic pot . as per
direction of the officer-in-charge.
40
-
-
... More
Providing and disply of Raphis Palm plant having ht 75 cm to 90cm distance, full of fresh and healthy leaves well development ,10" E POTS & as per direction of the offocers -in charge.
40
-
-
... More
providing and displying plant antirrhinum hybrid dwarf varity (8-10 plants ) with fresh & healthy foliage in full bloom well developed in 35 cm earthen tray / challi pot and as per diection of the officer in charge
30
-
-
... More
providing and displying plants cineraia long 45 to 60 cm ht, 8 to 10branch with full bloom specimen plants with green painted stacking in 30 cm earthen pot /plastic pot and as per direction of the officer in charge.
50
-
-
... More
providing and displying plants Dahlia kenya varity in different colour well development with 3 to 4 flowers in half bloom , good foliage stacked with green painted bamboo stivks , 45 to 60 cm height in 25 cm earthen pot / plastick pot and as per direction of the officer in charge.
60
-
-
... More
providing and displying plants Dianthus dwarf in spcimen 6-8 plants in a pot with fresh & healthy foliage in full bloom well developed in 35 cm earthen tray / nand as per direction of the officer - in - charge.
25
-
-
... More
providing and displying plants marigold jaffri dwarf in different colour well developed with fresh &helthy foliage with 12 to 15 flowers in full bloom specimen plant 23 to 30 cm ht . In 20 cm earthen pot /plastic pot and as per direction of the officer in charge.
60
-
-
... More
providing and displying plants Pansy hybrid sakata with fresh &healthy foliage with 3 to 4 flower in bloom in 20 cm earthen pot/ plastic pot and as per direction of the officer incharge.
60
-
-
... More
providing and displying plants petunia hybird well develooped withfresh & healthy foliage in full bloom 6-8 plants in 35 cm earthen tray /nands per direction of the officer incharge.
30
-
-
... More
providing and displying plants Ranunculus hybrid varity in different colour specimen 5-6 plants in each pot with fresh & health foliage in full bloom well developed in 35 cm earthen tray / nand as per of the officer incharge.
25
-
-
... More
Providing and Displaying Standard Rose (H.T. variety) 3 to 4 healthy branch 90 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge.
20
-
-
... More
Providing and Displaying Cycus revoluta specimen , having 45 to 50 freshand healthy, leaves having 30cm to 35cm circumfrance of base stem well developed in 40 cm challi, as per direction of the officer-in-charge
30
-
-
... More
providing and displying ficus black vivon pillar topiary plant (sylinder type )well developed with fresh and healthy 180 to 210 cm ht in 40cm cement pot as per direction of the officer in charge.
14
-
-
... More
providing and displying FoxTail plam pant well developed with fresh and helthy foliage leaves of ht 210 to 240 to cm specimen plant in 40 cm cement pot as per direction of the office in charge.
30
-
-
... More
Providing and Displaying Travelers palm well developed with fresh & healthy
foliage 120 to 150 cm ht. in 35 cm Cement Pot as per direction of the
officer-in-charge.
60
-
-
... More
Providing and Displaying Washingtonia filifera palm well developed 90 to 105 cm ht. having 5 to 6 straight fresh and healthy leaves in 35 cm Cement Pot as per direction of the officer-in-charge.
30
-
-
... More
supply and stacking ofplant tecoma stans of heigh 90-105 , 90-105 cm bushy in big size HDPE bag as per direction of the officer in charge
60
-
-
... More
Providing and stacking of Thuja compacta of height 75-90 cm., conical shaped, well formed with healthy foliage in earthen pots of size 30 cm as per direction of the officer-in-charge.
50
-
-
... More
Providing and stacking of Allamanda cathartica of height 30 cm to 45 cm.
in 20 cm size of Earthen pots / Plastic pots & as per direction of the
officer-in-charge.
160
-
-
... More
Providing and stacking of Bignonia venusta (Golden shower) of height 30
cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.
220
-
-
... More
Providing and stacking of Clerodendrum thomsoniae of height 30 cm.to 45
cm in 20 cm size of poly bag & as per direction of the officer-in-charge.
200
-
-
... More
Providing and stacking of Passiflora caerulea (Rakhi bel) of height 30 cm
to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of
the officer-in-charge.
100
-
-
... More
Providing and stacking of Petra volubilis of height 30 cm to 45 cm. in
20 cm size of Earthen pots / Plastic pots & as per direction of the
officer-in-charge.
160
-
-
... More
Eathwork in stripping in all kinds of soil including moorum soil ,soil mixed with kankar ,pebbles and boulders upto 300mm size and disposal of the same along with all organic materials (beyond 50Maway from the toe of the dam base in the country side )within initial lead of 150M .and all lifts as per specification and direction of E/I
418.47
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank, (SINTEX / SINTER) ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflowpipes but without
fittings and the base support for tank.
11000
-
-
... More
Supply fitting and fixing GI pipe 50 mm Dia (TATA or equivalent make) Medium Quaility as per IS:1239 ( part 01 ) 2004
345
-
-
... More
Angle steel section
50mmx50mmx6mm
1.77
-
-
... More
9" (230mm) metal exaust fan
4
-
-
... More
SITC of 300 mm (12") Exhaust fan (Metal body) suitable for single phase 230 volts, 50 Hz., AC supply complete with motor, louvers/shutters etc. complete as required. Make :-
Usha/Crompton / Havells .
17
-
-
... More
15/16 Watt LED BULB
99
-
-
... More
Bulk head fitting with 9/10 Watt CFL/LED
14
-
-
... More
Supply of 20m High mast light in two section Construction S355 grade as per BS-EN 10 025 Top Dia 150mm, bottom dia 410mm, plate thickness 3mm, 20side Polygon, galvanisation as per BS EN ISO 1461, base plate dia 570mm, base plate thickness 25mm, GI single spike lightining protection, maximum wind speed 47m/switch 8nos foundation bolts of pcd 490mm TS 600/30mm dia/850mm long. Luminaries carraige: material for 50 NB ERW Class B- M.S Pipe. dia of carraige ring 535mm (ID) with 6 arm, welded, 2 sections having carraying capacity upto 12 luminaries. Trailing Cable : 5core 4sq.mm. PVC flexible copper conductor winch/power Tool : Double drum , SWL 750kg with 1HP 6 Pole single speed integral motor Rope: Grade AISI 316, 7/19 construction, dia 6mm BLC 2350x2 having 2 nos of continues rope. Aviation obstruction light : twin dome aviation obstruction lights LED type as required. (But excluding Feeder Pillar)
6
-
-
... More
D.G Set of Capacity 100KVA with AMF panel
1
-
-
... More
Supply of G.I. pipes of Tata or any other ---------- all complete job as per direction of E/I.
-
-
-
... More
(i) 15mm dia
90
-
-
... More
(ii) 20mm dia
70
-
-
... More
(iv) 32mm dia
60
-
-
... More
Supplying, fitting and fixing bathroom fittings of approved make and as per IS specification all cost complete as per direction of E/I. (all rates have been adopted from the basic rate from SOR + 15% for labour and Contractors profit)
-
-
-
... More
piller Cock (Long Neck)
5
-
-
... More
Bib Cock (sort Neck)
17
-
-
... More
Bib cock (Long Thread) for sink
2
-
-
... More
Towel Rail 24"
5
-
-
... More
Toilet Paper Holder
2
-
-
... More
Glass shelf 22'
5
-
-
... More
Cost of Drilind 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressureand equipmentsas well as fule, lubricantsand cost of transportation of rig machine annd other vehical up to Site.
-
-
-
... More
(a) From 0.00 M to 50.00 M below G.L.
150
-
-
... More
(b) From 51.0 M upto 150.00 M
300
-
-
... More
Supplying submersible pump sets confirming to 8034 and motor confirming to IS 9283 pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller. Motor suitable for working on 415 + 10, 3HP, 50 Hz, AC supply with cable guard, thurst carbon/fiber bearing to withstand entire hydraulic thurst, water proof winding shall be provided. The pump set shall be suitable for diret coupling Pump shall have suitable outlet as per manufacturers design. Anti thurst stream lined non return valve shall be provided with pump, 3 meter submersible copper conductor cable in single/double run shall be provided with each pump.
Submersible pump set 100mm dia (with Polypropylene/Noryl Impeller) up to 20 stages
2 HP
3
-
-
... More
Supplying Full automatic star selta starter to operate induction motor working on 415v 3phase 50hz with no coil. Over load element , On _OFF push buttom with necessary materials and connection to Supply etc complete starter with original sheel steel encloser as per 3914.
F.A.S.D starter upto 10.0 H.P
3
-
-
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel 610MMX510MM BOUL Depth 200 mm
2
-
-
... More
3 core PVC insulated PVC sheathed copper conductor flat submersible cable.
Supplying , Flat flexible submersible cable with ,copper conductor , PVC insulated and PVC sheathed as IS:7098
3 Core 4 Sq mm
390
-
-
... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
-
-
-
... More
CARVING WORK OF GUARD ROOM & TICKET COUNTER
18
-
-
... More
CARVING WORK AT FRONT FAÇADE With FRP
376.6
-
-
... More
ANIMAL SCULPTURE
4
-
-
... More
Wall & CELLING PANNEL
672.6
-
-
... More
Roof SHED
215
-
-
... More
Tensile Roof
3480
-
-
... More
Fiber Umbrella
4
-
-
... More
ART FISH SHAPE
86.11
-
-
... More
Feeder Pillar
6
-
-
... More
CARVING WORK - SHOP
5
-
-
... More
CARVING WORK - Passage
2
-
-
... More
Wash Besin
1
-
-
... More
Wireframe Standing Elephant
2
-
-
... More
Wireframe Standing Peacock
2
-
-
... More
Wireframe Standing Deer
2
-
-
... More
Wireframe Standing Girrafe
1
-
-
... More
Wireframe Standing Butterfly
1
-
-
... More
Net Climbing
1
-
-
... More
Tire Climbing
1
-
-
... More
Wall Climbing
1
-
-
... More
Zip-Line (70.6 M)
1
-
-
... More
Fabrication & structure
1
-
-
... More
Design,drawing& Installation
1
-
-
... More
Family Passenger Boat with OBM
1
-
-
... More
Family Pedal Boat
1
-
-
... More
Water Bike (Single Person)
1
-
-
... More
Floating Jetty
10
-
-
... More
Little Mermaid (Material- FRP, L-6FT, W- 3ft with Stand and Painting)
1
-
-
... More
4- Piece Dolphin with Wavw Stand (Material- FRP, l-6FT, w- 6FT WITH Stand and Painting)
1
-
-
... More
Coral Reef (Material - FRP, L- 6ft, W-6ft with Stand and Painting)
1
-
-
... More
Red Fish with Wave Stand over Stone Base (Material- FRP, L- 6ft, W- 6ft with Stand, Civil Work Included and Painting)
1
-
-
... More
3 Colorfull Fish with Wave Stand (Material- FRP, L- 6ft, W- 6ft with Stand and Painting)
1
-
-
... More
Fish with Netted Structure with Coin like structure on mouth (Material- FRP, L-6ft, W- 6ft with Stand and Painting)
1
-
-
... More
Multiple Fish in Silver Color in C Shape with Stand (Material- FRP, L- 6ft, W- 6ft with Stand and Painting)
1
-
-
... More
Round Zorbing Roller Ball
2
-
-
... More
Zorbing Roller Ball
1
-
-
... More
Gazebo Shed
3
-
-
... More
DIVYA FIBER PRODUCT AND
OUTDOOR GYM EQUIPMENT Jungle
Rumble Play Zone For children of
age group of 3 to 12 years
2
-
-
... More
DIVYA FIBRE PRODUCTS & OUT
DOOR GYM EAUIPMENT--DIVYA FIBRE PRODUCTS & OUT DOOR GYM EAUIPMENT Jungle Rumble
Play Zone For children of age group of 3 to 12 years
DIVYA FIBRE PRODUCTS & OUT DOOR GYM EAUIPMENTUnregistered Brand Manufactured by: DIVYA FIBRE PRODUCTS & OUT DOOR GYM
EAUIPMENT
2
-
-
... More
LANDSCAPE STRUCTURES Jungle
Rumble Play Zone For children of
age group of 3 to 12 years
2
-
-
... More
LANDSCAPE STRUCTURES Jungle
Rumble Play Zone For children of
age group of 3 to 12 years
2
-
-
... More
WONDERPLAY Jungle Rumble Play
Zone For children of age group of 3
to 12 years
2
-
-
... More
NIDHI PLAY SYSTEM Jungle Rumble
Play Zone For children of age
group of 3 to 12 years
2
-
-
... More
NIDHI PLAY SYSTEM Jungle Rumble
Play Zone For children of age group
of 3 to 12 years
1
-
-
... More
Replay Jungle Rumble Play Zone
For children of age group of 3 to
12 years
2
-
-
... More
United Sports Emporium Jungle
Rumble Play Zone For children of
age group of 3 to 12 years
2
-
-
... More
WONDERPLAY Jungle Rumble Play
Zone For children of age group of 3
to 12 years
2
-
-
... More
ANERA KHALSA Air Walker/ Stroller Double
ANERA KHALSA
(Air Walker/Stroller- Outdoor Gym Equipment
1
-
-
... More
AVON Three Wheel Shoulder Builder/ Arm
Wheel- Outdoor Gym Equipment
1
-
-
... More
Chest press
1
-
-
... More
D.S.Engineering Bodymaster Pvt. Ltd.Double Surf Board - Outdoor GymEquipment
D.S.Engineering Bodymaster Pvt. Ltd.
(DSOA007)
1
-
-
... More
Fun Play systems Double Surf Board -Outdoor Gym Equipment
Fun Play systems
(FNF012D)
1
-
-
... More
GYMNCO Two Wheel Shoulder Builder/ ArmWheel- Outdoor Gym Equipment
GYMNCO
(GYMNCO106)
1
-
-
... More
MonaLisaHealthCare Air Walker/ StrollerDouble
MonaLisaHealthCare
(MOG103A)
1
-
-
... More
BODY STEEL Triple Twister ( Three
standing ) Twister - Outdoor Gym
Equipment
1
-
-
... More
PUTEX Double Twister ( One
standing and one sitting ) Twister -
Outdoor Gym Equipment
1
-
-
... More
PUTEX Leg Press - Outdoor Gym
Equipments Leg Press Double
1
-
-
... More
KHALSA Three Wheel Shoulder
Builder/ Arm Wheel- Outdoor Gym
Equipment
1
-
-
... More
KILKARI Double Twister ( Both Sitting ) Twister - Outdoor Gym Equipment
1
-
-
... More
AVON Chest Press Double - Max user weight - 110 kilogram
1
-
-
... More
D.S.Engineering Bodymaster Pvt.
Ltd. Chest Press Single - Max user
weight - 110 kilogram
1
-
-
... More
KRISHTHA Cast Iron Polish Garden
Bench, Capacity 3 Seater
KRISHTHA
3
-
-
... More
KRISHTHA Cast Iron Powder Coating Garden Bench, Capacity 3
Seater KRISHTHA
3
-
-
... More
SARWADNYA Cast Iron Powder Coating Garden Bench, Capacity 3
Seater SARWADNYA
2
-
-
... More
mintage Stainless Steel Dust Bin 1 Bin Mounted with 1 Pole capacity
40 ltr mintage
3
-
-
... More
K1 Stainless Steel Dust Bin 1 Bin Mounted with 1 Pole capacity 70 ltr
3
-
-
... More
Magnum Opus--MAGNUM OPUS TURNKEY PROJECTS Drinking Water
ATM Reverse Osmosis (RO) 0
1
-
-
... More
Hydrosol Standard Tech Solutions Drinking Water ATM UF+RO 500 Hydrosol Standard Tech Solutions
1
-
-
... More
SUN ENERGY INDIA ENTERPRISES 6 20 Watt White LED type
SUN ENERGY INDIA ENTERPRISES
1
-
-
... More
Add GST 18 %
18
-
-
... More
Add Labour cess 1%
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%