Back
  1. Home/
  2. Indian Tenders/
  3. Jharkhand Tenders/
  4. State Building Construction Corporation Limited/
  5. Overview

State Building Construction Corporation Limited Tender

Search from across the categories, cities, and authorities to find the latest Jharkhand tenders. Every Jharkhand tender is curated from credible sources of government websites (eProcurement Jharkhand portal) and newspapers, thus ensuring the credibility of the information presented to you. For more information on Jharkhand tender bidder registration, the login process and more read the FAQs section on this page.

State Building Construction Corporation Limited - JSBCC Tender

Works
Civil And Construction
Excavation
Eprocure
Ranchi, Jharkhand
Opening Date11 Dec 2024
Closing Date26 Dec 2024
Tender Amount₹ 2,56,17,65,707 
Notes
Download

Costs

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Request Call Back

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
All kinds of soil

33504.52

-

-

... More
Extra for earth work in hard soil as per specification & direction of engineer in charge ( vide classification of soil item B)

24679.17

-

-

... More
Earth filling in foundation trenches and plinth in layer not exceeding 150 mm thick wall watered rammed fully compacted and fine dressed with earth obtained from excavation of foundation trencheed with a lead of 50mm and lift of 1.5 m all complete as per building specification and direction of E/I ( mode of measurement compacted volume )

9728.31

-

-

... More
Disposal of earth by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge.

39630.86

-

-

... More
Providing coarse clean local sand in filling in foundation trench or in pinth including ramming and watering in layer not exceeding 150mm thick with all lead and 1.5 m lift including cost of all material , labous , royality and taxes all complete as per building specification and direction of engineer in charge ( mode of measurement compacted volume)

2043.22

-

-

... More
Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l

12540.32

-

-

... More
Clearing grass and removal of rubbish up to a distance of 50 meters outside the periphery of the area

0.6

-

-

... More
Treatment of soil under existing floors using chemical emul sion @ one litre per hole, 300 mm apart including drilling12 mm diameter holes and plugging with cement mortar 1 :2(1 cement : 2 Coarse sand) to match the existing floor:

-

-

-

... More
With Chlorpyriphos E.C. 20% with 1% concentration

9750.04

-

-

... More
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20%

250

-

-

... More
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration

750

-

-

... More
CONCRETE WORK

-

-

-

... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement : 4coarse sand : 8 graded stone aggregate 40 mm nominal size)

2093.62

-

-

... More
RCC WORK

-

-

-

... More
Providing and laying in position machine batched and machine mixed design mix -25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix including pumping of concrete to site of laying but excluding the cost of centering shuttering,finishing and reinforcement, including admixtures in recommended proportion as per IS : 9103 to accelerate retard setting of concrete improve workability without impairing strength and durability as per direction of engineer in charge (note :- cement content considerd in this item is @ 330kg/cum excess /less cement used as per design mix is payable/recoverable separately).

-

-

-

... More
All work upto plinth Level

9746.32

-

-

... More
RCC All work above plinth

14264.73

-

-

... More
Extra for RCC/BMC/RMC/ work above floor v level for each four floor levels

2782.12

-

-

... More
Add for using extra cement in the items of design mix over and above the specified cement content therein.

20244.37

-

-

... More
Concrete of M30 grade with minimum cement content of 350 kg /cum

4853.42

-

-

... More
Providing Tor steel reinforcement of 8mm. dia.TMT rods as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. (TMT Fe 500 (only vailid for TATA (TISCON), SAIL, JSPL, Electro steel Limited Bokaro and Vizal steel(RINL))

442.07

-

-

... More
Providing Tor steel reinforcement of 10mm,28/32mm dia. TMT rods as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. (TMT Fe 500 (only vailid for TATA (TISCON), SAIL, JSPL, Electro steel Limited Bokaro and Vizal steel(RINL))

891.27

-

-

... More
Providing Tor steel reinforcement of 12/16mm. & 20/25mm. dia. TMT rods as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. (TMT Fe 500 (only vailid for TATA (TISCON), SAIL, JSPL, Electro steel Limited Bokaro and Vizal steel(RINL))

3110.52

-

-

... More
Centering and shutteing including struting, propping etc and removal of form for

-

-

-

... More
Foundations, footings, bases for columns, etc for mass concrete

1262.51

-

-

... More
Walls ( any thickness) including attached pilasters, butteresses, plinth and string course etc

5380.44

-

-

... More
Suspended floors,roofs,lancing,balcones and access platform

54066.96

-

-

... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers

22122.89

-

-

... More
Columns, Pillars, Piers, abutments, Posts and struts

24664.98

-

-

... More
Stair , ( excluding landings), except spiral staircase

1334.76

-

-

... More
Extra for shuttering in circular work in Suspended floors,roofs,lancing,balcones and access platform ( 20% of respective centering and shuttering items)

40.69

-

-

... More
Extra for shuttering in circular work in Lintels, beams, plinth beams, girders, bressumers and cantilevers( 20% of respective centering and shuttering items)

80

-

-

... More
Extra for shuttering in circular work in Columns, Pillars, Piers, abutments, Posts and struts( 20% of respective centering and shuttering items)

25

-

-

... More
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured). uspended floors, roofs, landing, beams and balconies (Plan area to be measured)

54066.96

-

-

... More
BRICKWORK

-

-

-

... More
Providing designation 75 A brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.

537

-

-

... More
Providing designation 75 B brickwork in C M ('1 :6 ) in foundation and Plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing. taxes and royalty all complete as per building specification and direction of E/l.

2.3

-

-

... More
Providing Designation 100A B/W with Fly Ash Lime Brick (FALB) conforming to IS 12894-1990 (9"x4.5"x3") in cement mortar (1:6) in Superstructure with clean coarse sand of F.M. 2 to 2.5 including 10mm thick mortar joints,cost of screening, raking out joints to 15 mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.

4451.93

-

-

... More
Extra for brick work for each consecutive floor above first floor including watering and scaffolding, all complete as per direction of ElC.

3561.55

-

-

... More
Extra for brick work / AAC block masonry / Tile brick masonry in superstructure above floor V level, for each four floors or part thereof by mechanical means

890.39

-

-

... More
Providing designation 112 mm thick reinforced designation 100 A brick work vuith fly ash lirne brick (FLAG)confirming to lS 12894-1990 (9"x4'5"x3" ) in C.M. ( 1 . 4 ) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, carriage of materials,n caffolding, raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specificationand direction of E/|.

21503.35

-

-

... More
Extra for providing and placing 2 no 6mm dia MS bar every 3rd coarse of half brick masonary

21503.35

-

-

... More
Extra for half brick masonry in superstructure, above floor V level for every four floors or part thereof by mechanical means .

3798.99

-

-

... More
WOOD WORK

-

-

-

... More
Supplying, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows skylights, fanlights and C/W celetial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all completeas per building specification and direction of E/I.

-

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

5

-

-

... More
Supplying fitting and fixing 35mm thick solid core type decorative single leaf flush door shutter with both side decorative veneered with black board core bended with high quality phenol formal clehydes synihetic resin of standard make with Aluminium fittings :such as hinges, tower bolts, hendle, cleats and sand blocks and laxes all conrplete as pe building specrfication and direction of E/l.

1813.88

-

-

... More
Supplying fitting and fixing 35mm thick soltd core type decorative double leaf flush door sltutter with both side decorative veneered with black board core bended with high quality phenol formal clehydes synihetic resin of standard make with Aluminium fittings :such as hinges, tower bolts, hendle, cleats and sand blocks and laxes all conrplete as pe building specrfication and direction of E/l.

449.4

-

-

... More
Providing & Fixing decorative high pressure laminated sheet of plain /wood grain in gloss / matt/ suede finish with high density protectivesurface layer and reverse side of adhesive bonding quality conformingto IS : 2046 Type S, including cost of adhesive of approved quality.9.127.2 1.0 mm thick

4526.55

-

-

... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (over all area of door shutter to be measured).

2263.28

-

-

... More
Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) :Rectangular or square.

2263.28

-

-

... More
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.

-

-

-

... More
Pre-laminated particle board with decorative lamination on both sides.

181.39

-

-

... More
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete :

-

-

-

... More
50x12 mm

5185.35

-

-

... More
Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete.

978

-

-

... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

978

-

-

... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

978

-

-

... More
Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/ sqm) suitable for mounting 120 minutes Fire Rated Glazed Door Shutters. The frame shall be filled with mineral wool Insulation having density minimum 96Kg/cum. The frame will have a provision of G.I. anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening along with factory made template for SS ball bearing hinges of Size 100x89x3mm for fixing of fire rated glazed shutter . The frame shall be finished with a approved fire resistant primer or powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- Charge . (Cost of SS ball bearing hinges is excluded).

1048.8

-

-

... More
Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire Rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/m²) duly filled mineral wool insulation having density min 96 kg/ m³ and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-charge (paneling to be paid for separately).

667.8

-

-

... More
Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete.

-

-

-

... More
FD1

174

-

-

... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.

-

-

-

... More
With stainless steel cover plate minimum 1.25 mm thickness

18

-

-

... More
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

-

-

-

... More
12 mm thick frameless toughened glass door

51.84

-

-

... More
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.Upto 5mm depth and 5 mm width

6091.35

-

-

... More
Providing and fixing S.S. sliding door bolts (aldrop) with nuts and screws etc. complete:

-

-

-

... More
250x16mm

550

-

-

... More
300 x 16mm

450

-

-

... More
Providing and fixing SS sliding tower bolt with required fastners (Screws) complete:

-

-

-

... More
250x10 mm

1100

-

-

... More
600 mm

900

-

-

... More
Providing and fixing SS handles "D" type with required fastners (Screws) complete:

-

-

-

... More
250x19 mm (Pipe dia)

550

-

-

... More
200x19 mm (Pipe dia)

450

-

-

... More
Providing and fixing SS hanging floor door stopper with necessary screws etc.complete:

-

-

-

... More
150 mm Rubber Stopper

980

-

-

... More
Providing and fixing SS door latch with necessary screws etc. complete.

-

-

-

... More
250x12 mm

970

-

-

... More
Providing and fixing SS sliding baby latch with required fastners (Screws) complete:

-

-

-

... More
100 x 10 mm

1100

-

-

... More
Providing & Fixing Wall mounted door Buffer

450

-

-

... More
Providing & Fixing dormakaba floor spring BTS 75V EN 1-4 with std. spindle and cover plate. The floor spring with backcheck and adjustable closing speed from 175°. . With 90°. hold open. As per EN 1154. (not suitable for fire doors) Finish: Satin stainless steel. Application - Aluminum Doors

12

-

-

... More
Providing & Fixing dormakaba rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two independent closing valves and latching speed adjustable by arm. Silver finish. As per EN 1154.

45

-

-

... More
Providing & Fixing dormakaba rack and pinion door closer TS 71 EN size 3/4, with std. arm and with two independent closing valves and latching speed adjustable by arm. Full plastic cover. Silver finish. As per EN 1154.

8

-

-

... More
Providing & Fixing dormakaba Pure Lever handle 8100 lever with roses, 7122 WC Indicator and spindle 8mm x 8mm x 110mm in satin stainless steel. Complete set including the fixing accessories for 50 mm thick door.

45

-

-

... More
Providing & Fixing Mortice dead lock 388a with 55mm backset, 20mm square forend prepared for europrofile cylinder including strike plate. deadbolt, Forend Material: SS 316. as per EN 12209, CE Marked, Fire Rated, Grade 3 Robust, Durability - 200,000 Cycles, Grade 6 High-Security Deadbolt with Anti-Saw Pins,8mm Square hole Clamp Follower, Corrosive resistance - Very High

45

-

-

... More
Providing & Fixing dormakaba 4014 Wall mounted door stop with coat hook in SSS finish

45

-

-

... More
Providing & Fixing dormakaba pull Handle TGDI-D 300 back to back with adjustable fixing for glass, wood and metal doors in satin stainless steel. The pull handles should have supporting washer with raised bevelling on the outer surface. Length =300mm, 22mm dia, -SS304

12

-

-

... More
Providing & Fixing TGDI D type Offset Pull Handle 350 x 25 mm, CTC - 350 mm, D - 25 mm,Back to back fixing with suitable fixing accessories , SS 304, Finish : Satin

8

-

-

... More
Providing & Fixing Male /Female sign plate 3020-M /3030-F , for WC application with fixing screws size 125 x 125mm, rounded corners in SS 304 satin stainless steel finish. Marking in black

45

-

-

... More
Providing & Fixing dormakaba lever action flush bolt with 19mm projecting bolt L=300mm for Metal door in satin chrome

45

-

-

... More
Providing & Fixing dormakaba 4012 wall mounted door stop dome with 60mm length with fixing accessories

45

-

-

... More
Providing & Fixing dormakaba floor stop half dome with 45mm dia with fixing accessories, in satin Chrome

45

-

-

... More
Providing & Fixing dormakaba DEC 6Plus 6 Pin Euro Profile Single Cylinder with Single side key operation Under Master Key system.Total Length = 43mm.Change Keys - 3 Nos.Finish - Nickel Plated

45

-

-

... More
Providing & Fixing dormakaba lever action flush bolt with 19mm projecting bolt L=300 mm for wood door in satin chrome

45

-

-

... More
Providing & Fixing Disable sign plate 3040-D for WC application with fixing screws size 125 x 125mm, rounded corners in SS 304 satin stainless steel finish. Marking in black

45

-

-

... More
Providing & Fixing dormakaba Pure Lever handle 8100 lever with roses, escutcheons prepared for Euro profile cylinder and spindle 8mm x 8mm x 110mm in satin stainless steel. Complete set including the fixing accessories for 50 mm thick door.

11

-

-

... More
Supply and placing of stainless steel centrifugal air curtain having following specification. The product should be made up stainless steel 304Grade having 4 Blowers(in M. Steel), 2 Motors operating on three phase , Power =2200 Watt having RPM (Max/Min = 2700) and having CFM of 3680. Overall Dimension of 1523X345X351(mm) with Noise level 68 db. Air Curtain should be provided with velocity control switch and a Door sensor. The product should carry manufacturers warranty of one year from the Date of Supply alongwith Tin Sheet as cover, Bracked and screws *Variations acceptable in parameters above - 5-10% The Product should be complete in all aspect as per Engineer incharge instructions.

11

-

-

... More
Supplying of Queue Manager madeup up of stainless steel material.The pole measures 1130 mm in height and 350 mm in diameter at the base. The belt measures 2 metres in length between the poles and weighs 9.1 kg with the queue manager.Blue, Black, and Red are the available belt colours.

11

-

-

... More
Supply of Fully Automated Shoe Cover Dispenser Machine with Automatic Shoe Counting Function. The machine needs a voltage of 220/50Hz and a rated power of 20W. The machine should have the following dimensions: 750 x 300 x 630 mm.The product will have a one-year general warranty.

2

-

-

... More
Supplying of INTERCONNECTED ROLLING - ALUMINIUM MATTING -5 YEARS WARRANTYProfile Colors : Silver or Black, Position of Matting : Inside/Foyer Area, Material : Aluminium Profile with Carpet, Area : High Traffic,Trolley Crossings : Heavy Trolley, Maintenance : Easy to clean, Application : Recessed / Surface, Warranty : 36 Months

25

-

-

... More
Supply of Powder Coated Galvanized Steel Fire hose cabinet doors. Door frames to be Single rebate profile of 90 x 45 mm manufactured from 1.6mm galvanized steel sheet, profile to have bending radius of 1.4 mm supplied in assembled form ready to install at site. Door Shutter manufactured from single sheet thickness 1.6mm galvanized steel sheet complete with 4mm thick glass with rubber gasket and beading with screw, locking arrangements with Allen key, hinges and flush handle etc. The door frames and shutter should be finished with powder coating with 50- 80micron in desired shade as per direction of Engineer- incharge. Door size: 1500mm x 750mm

129

-

-

... More
Providing and fixing ISI marked 35mm thick flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction : 35 mm thick including Stainless Steel butt hinges with necessary screws.

12

-

-

... More
Supply and Installation of Vertical Louvers, CS- 200 Vertical Fin system components has to be in Aluminum extrusion Alloy 6063-T5/T6/1100/3000 Series, with minimum thickness of the extruded minimum 1.5 mm, with Blades Multi tube tapered from 27” down to 10” projection, extruded aluminum rectangular tube design. Tubes shall be factory assembled to outriggers using stainless steel, type F, thread cutting screws through internal screw slots in blades. Welding is not acceptable. Blades to be mechanically secured to allow for replacement in case of damage. Fasteners to be hex head. All the fasteners used shall be of Stainless steel for the construction of the louvers and should be mechanically fastened. Louver must be factory fabricated and finish so that only assembly/ installation will be done at the site. Finish will as per the approved RAL color in Super durable Powder Coat System, Complying with AAMA-2604 standards. Finish thickness to be minimum 2 mils.

291.6

-

-

... More
Providing and fixing lead lined door 1200mm x 2100mm , the frame for the door is second class teak wood (ivory cost ) properly seasoned wood of section 100*60mm with a coat of viper make primer and paint. 44mm thick doors shutter are made out of 34mm thick BWP grade board door shutter sandwiching 2mm thick lead sheet of radiation control, 6 mm thick commercial ply and 1mm thick laminate in shuede finish on both the faces of shutter lead lining to be done for frame and shutter both with 2mm thick lead sheet of radiation control. The frames are fitted in masonary opening with the help of anchor fastners of Hilti/Ficher make of size 10*100/10*120mm. 8mm thick Lead lined glass Hardware for the doors are inclusive and includes - stainless steel SS ball bearing hinges 100*75*3 mm of beaker of equivalent make, Dead lock with both side key opration of Becker or equivalent make back to back D handels of size 19*300 mm stainless steel grade of Becker or equivalent make, Face mounted Tower bolt 300 mm long of Becker or equivalent make, face mounted door closer of Becker or equivalent make, all work is being carried out under the direction of Engineer in charge.

5

-

-

... More
roviding and fixing of Clean room doors - 1200mm x 2100mm of Navair/Godrej/Kutty make. The Door is made out of GPSP sheet of Zinc coating not less than 90 GSM. The frame is made out of 1.2 mm thick GPSP sheet having section 10057 mm. Doors shutters are made out of 0.8 mm thick GPSP sheet and having insulation of resin bonded honey comb craft paper. All frames and shutters are finished with Polyester coating of thickness 60-80 micron. The rates also includes the provision of Door hardware like Stainless steel SS ball bearing hinges 100753 mm of Becker of equivalent make, Dead lock with both side key operation of Becker or equivalent make, Back to Back D handles of size 19300 mm stainless steel grade of Becker or equivalent make, concealed flush bolt 300 mm long of Becker or equivalent make, Face mounted door closer of Becker or equivalent make,Both side flush type Vision panel Fitted with 5 mm thick Toughened glass with 20 mm black border, P type seal on perimeter of frame, Door bottom Drop seal of Enviro/Raven make all work is being carried out under the directions of engineer incharge.

4

-

-

... More
STEEL WORK

-

-

-

... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

25256.85

-

-

... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

119383.4

-

-

... More
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge profile B

-

-

-

... More
Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)

5185.35

-

-

... More
Supplying,frtting and fixing M.S. grill made of 20x6cmm M.S. flat as per approved design and drawing, properly fabrlcated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/1

7035.6

-

-

... More
Supplying, fitting and fixing M.S. grill gate with M.S. grill made of 20X6mm M.S. flats or 16mm M.S. square bars fitted on 25X25X6mm M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.

119.7

-

-

... More
FLOORING WORK

-

-

-

... More
providing and laying, Doublecharge vitrified floor tiles in different sizes (thickness to be specified by lhe manufacturer) with water absorption less than 0.08% and conforming to lS 15622/ISO 13009 of approved make in all cotours and shades, laid on 20mm thick cement mortar 1 4 (1 cement:4 coarse sand) jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of tile 600x600 mm

5342

-

-

... More
Providing and fixing granite 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for flooring, kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade Area of slab over 0.50 SQM

221.08

-

-

... More
Providing edge moulding to 18 mm thick marble/granite stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

497.83

-

-

... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

354

-

-

... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

1393

-

-

... More
Providing and laying 1st quality Ceramic glazed wall tiles thickness to be specified by the manufacturer) in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing polishing and cost of curing, taxes and royalty all complete as per building specification and direction of E/I.

17351.74

-

-

... More
Kota stone slab flooring over 25 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :600x600

4714

-

-

... More
Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

3625.35

-

-

... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge

-

-

-

... More
Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent

29453.56

-

-

... More
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : 11.55.1 Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

2000

-

-

... More
Providing & Fixing flexible Conductive PVC sheet flooring of Armstrong/ Forbo/ Polyflor having a total thickness of 2mm and weight of 3kg/m².Colors and pattern detail shall be dispersed throughout the thickness of the wear layer. It shall conform to Group P of Wear Resistance as per EN 649, Flammability of class Bfl-s1 as per EN 13501-1, Slip resistance as per DIN 51130 group of R9 , having REACH Registration No, 1907/2006 contains no substance mentioned in SVHC list. Impact sound reduction of 3 dB as per ISO 140-8, Residual indentation of 0.05 mm as per EN 433, Color fastness rating ≥6 as per ISO 105-B02, Vertical resistance(R1) less than 1 x 10⁶- 1x 10⁸Ω as per EN 1081, and surface resistance less than 1 x 10⁶- 1x 10⁸ Electrical insulation to ground greater than 50 kΩ as per VDE 0100, Static electrical charge of ≤2.0kV as per EN 1815, Thermal resistance of 0.04m²K/W as per EN 12667, Thermal conductivity of 0.25 W/mK. Equivalent to Armstrong PASTELL. Installation:It is important to ensure the sub floor on which the sheet is being laid is smooth, flat & hard & free from moisture, grease, etc. In case of uneven sub floor the

-

-

-

... More
The moisture level present in the subfloor should be less than 8% before installation of the floor. The sheet should be laid using adhesive recommended by company.Each row of tiles/strip of floor covering must be linked crosswise with a continuous copper strip. Individual rows/strips must be at least 3 m² in size and linked to the rest of the area with a copper tape. In rooms of up to 40 m², connection points for equipotential bonding should be provided in at least one point in the room.

411.5

-

-

... More
Supply and installation of PVC sheet flooring 2 metre wide and overall thickness of 2mm of Armstrong/ Forbo/ Polyflor. The product should be homogeneous and single layered. The wear surface shall consist of impregnated polyurethane homogeneous mixture of PVCwith DIAMOND 10 technology, Plasticizers without DOP, Urethane, color pigments and filler calendered to form a sheet. Product shall conform to group "T" wear resistance as per EN 649, Flammability resistance of class Bfl-s1 as per EN13501-1, Dynamic coefficient of friction of class DS as per EN 13893, Impact sound reduction of 3dB as per ISO 10140, Slip Resistance of class R9 as per DIN 51130, Color fastness rating of ≥6 as per ISO 105-B02, total weight being 3.3 kg/m2 as per EN430. The product shall be suitable for applications in class 23/34/43 areas as per EN685. Product shall exhibit antistatic behaviour, resistance to bacteria,resistance to chemical, resistance to staining,suitability to castor chair.

-

-

-

... More
Installation- It is important to ensure the subfloor on which the sheet is being laid is smooth, flat, hard and free from moisture, grease etc. In case of uneven subfloor the same should be levelled using self leveling compound which will charged extra. The moisture present in the subfloor should be less than 8% before installation of the floor. dhesive. The installation shall be undertaken as per manufacturers installation instructions.

298

-

-

... More
Providing and laying of 2 - 3 mm average thick layer of cementations smoothening compound of UZIN NC 149 sh or equivalent as recommended by the Vinyl sheet flooring manufacturer over and including a priming compound of UZIN PE 360 sh or equivalent as recommended by the Vinyl sheet flooring manufacturer and installation team on concrete surface to provide a smooth & homogenous surface for laying of vinyl sheet flooring complete to the entire satisfaction of Engineer-in-charge.

709.5

-

-

... More
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge.

-

-

-

... More
In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand)

-

-

-

... More
Acid and alkali resistant tile

154.2

-

-

... More
Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete.

-

-

-

... More
8.mm thick Granite of any colour and shade

138.14

-

-

... More
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Dark shade pigment using ordinary cement

200

-

-

... More
Extra for vaccum dewatering the concrete floors using TREMIX or equivalent over P.C.C layer i/c finishing the top surface to required level/ slope and grade with rough / polish finish using power trowels (both fan & disc) of standard make including curing, cutting of groove of grid size 4m x 4m with, mixing of nonMTR.allic hardening compound (3.0 Kg/SQM of Fosroc or approved make) ,cutting of VDF floor with Diamond Saw System (disposal of debris to be included in the quoted rate)as per specification etc. complete as per specification and drawing. (Maximum thickness of RCC flooring shall be of 150 mm) At all heights / depths and levels. Extra for filling grooves with polysulphide 6mm wide, 20mm deep.

6404

-

-

... More
P&F flexible PVC sheet wall cladding in 1.00 mm thickness in the size of 1.5 x20mtr with PUR treatment. The wear surface shall consist of impregnated polyurethane homogeneous mixture of PVC, Plasticizers, Urethane, color pigments and filler calendared to form a sheet. Colors shall be dispersed throughout the thickness of the wear layer. It should conform to Group M of Wear Resistance as per EN 660-2, Fire resistance of group 2 as per AS/NZS3837, Residual indentation of ≤0.10mm as per EN433, curling after exposure to moisture ≤8mm as per EN434, Seam strength of mean≥240N/50mm as per EN684. Equivalent to Armstrong Walldesign.

609

-

-

... More
Providing and supplying Armstrong ‘Optra Acoustical Wall Panelling’ with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and fire-resistant fabric with an option of colours as per the choice of the Architect/ Person in-charge of size 2100x600 or 600x600 mm providing a minimum sound absorption level of 0.90 NRC to be affixed to wall using Wall panel impalers supplied by M/s Armstrong Industries India Pvt. Ltd and construction adhesives as per the instructions laid down by the manufacturer .

58

-

-

... More
Providing & Fixing of Linear Flocked textile floor covering of Nylon 6.6 face fiber or equivalent of approved make with 100% Nylon and completely water proof resilient backing. The flooring should be Anti static with thickness of 4.3 mm and approximate weight of 1.8 k.g./sqm of roll form. The carpet should be completely stain resistant and of a density approx. 80 million fibers/sq.mtr (70 million fiber/sq.yd) in the width of 2 mtr .The floor covering should have Fire Test EN-13501, Appearance Retention Hexapod ISO 140-8, Friction Slip Resistance Test EN 14041 Class DS, with resilient waterproof backing, anti allergic which is certified by British allergy foundation, with ten year replacement guarantee. The carpet should have permanent static control & should be fixed with powder coated aluminum angles as per detail. The work should be carried out by the authorized installer of the Company in India.

150

-

-

... More
ROOFING & WATER PROOFING WORK

-

-

-

... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design

-

-

-

... More
In 75x75 mm deep chase

945.7

-

-

... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

100

-

-

... More
Roof/Terrace Water proofing:

-

-

-

... More
Water proofrng for Old and New Roof Slab :- Providing and laying waterprooflng treatment on roof slab by applying two Component, factory a designed ready to use, acrylic modified flexible,material applied with brush, roller or spray for wate proof i n g coating as per manufactlrer specificatio With following steps :-

-

-

-

... More
(a)surface preparation :-Provrding and cleaning of concrete surface to remove dLrst, oil, grease including removal of existing loose paint / coating, and cement laitance by cleaning with compressed air & water jet including all materials, labour, tools complete. Ponding test to be done after plugging all outlets and to be checked from sofftt to identify seepage, leakage. On identiiication of seepage, cement grouting to be done with non shrink expanding admixture of Sika lndia Pvt.Ltd. / MYK Schomberg / Dr Fixit/Fosroc or equrivallent. Providing and

-

-

-

... More
b)1st Coat :- Apply 1st coat of two component acrylic modified, ready to use, llexrble cementitious material on surface saturated dry roof and inside wall of Parapet wall upto 600 mm by brush or roller. After 1st coat of application ,45 gsm oI Fibre glass cloth to lay when the first layer is still green. 1st coat should be applied @1.50 kg/SqmUcoat For the fJUrpose of n'ieasurernent tite entire treated surface will be measured."

-

-

-

... More
(c) :2nd Cr:ai :-T,: apply the 2nd coat of two component acrylic modified, reatiy to-use, flexible cementttious material right angle to the '1st coat over the glass fibre liad surface. 2nd coat should be applied @0.7 kgl Sqrnt/coat. For the pltrpose of measurement the entire treated surface will be rneasurecl." Alte r three days of drying the 2nd coat, therainwater ouilets to be plugged and ponding test to be done for 48 hours to rrjerrtify se epage, leal

-

-

-

... More
d) Protection of treated surface with PCC- The treated surface should be covered with 25mm/50mm PCC of M-20 grade(1:1.5:3) with proper slope ( '1:120) towards tlre rain outlets in alternatepanels of 2 mt x 2mt keeping 6 mrn gap betuieen the panel joint. lntegralwater proofing admixture conforming to lS 2645 @ of 100 ml per bag of of cement to be added in the scree d concrete(pard separately for thts ltems).-All corners shall be

-

-

-

... More
(e) Groove of PCC surface should be filled with Polysulphide Sealant (Paid Separately) Brand - Sika lndia Pvt Ltd / MYK Schomberg / Dr Fixit/Fosroc Warranty for Five years

10265.94

-

-

... More
Covering of treated surface wrth PCC :- Providing 50 mm thick Cement Concrete M20(1:'1.5:3) maintaining slope in alternate 2 mIx 2 mt panels with aaproved quality of stone chips of 20 mm to 6 mm size graded and clcaned sand of F M 2 5 io 3 including screening, shuttering and mixing cement concrete in mixer with admixture of intergral water proofing and placing in position,skirting curing,taxe and royality all complete as per building specification and direction of E/I. panels that has been left should be casted next day. ther should be 6mm gap between panels brand -sikka- plastocrete plus.MYK proof WP 20 ,fosroc-conplast X 4211C Dr,fixit pidiproof DW or Equivalent.

10265.94

-

-

... More
Providing and mixing Liquid lntergral water proofing compound in Conctrete or plaster as per rnanufacturer specificatioqand as per cjirection of Eng - in Charge Brand- Sika Plastocrate plus, MYK proof WP 1 0, Fosroc-Cc.rnplast X4211 C, Dr fixit Pidiproof LW+ or Equivalent

1272.98

-

-

... More
Toilet/Kitchen Water proofing:

-

-

-

... More
1) Surface preparation by grinding machine, cleaning , crack filling etc. complet

-

-

-

... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :

-

-

-

... More
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours

-

-

-

... More
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry

1671.6

-

-

... More
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

250

-

-

... More
Basement waterproofing:(Treatment below Raft) 1) Clean all dirt, loose material and kept dry. In case of pot holes/cracks, the same shall be repaired with cement putty using Dr. Fixit Pidicrete URP. (Sand cement to be provided free of cost at site)

10083.04

-

-

... More
Below Raft - Supplying and installing 1.5 mm composite thick self adhesive fully bonded HDPE membrane, Dr.Fixit Prebond having tensile strength of 25 MPa as per ASTM D 412, elongation of 500% as per ASTM D 412, puncture resistance of 1000 N as per ASTM E 154, UV resistant up to 45 days and conforming requirements of UG waterproofing structures, as per manufacturer's recommendation. The membrane should be minimum 2.4mx20m to reduce the number of joints, minimum 75mm factory made selvedges and comprising of an HDPE layer and a pressure sensitive adhesive layer which is covered by a weather proof protective and trafficable granular layer to protect self adhesive polymer layer. The waterproofing system should be applied by the manufacturer approved partner applicator with 10 years of warranty against leakage. Products made in India will be given preference.All vertical surfaces will be fixed using prefixed gaskets etc. complete as per manufactures specification.

10083.04

-

-

... More
Supply & installation of 180 gsm geotextile as a protection layer. Protecting the membrane with 50mm thick Screed (P.C.C)

10083.04

-

-

... More
Retaining Wall :- Providing and laying of minimum 1.5 mm thick SBS modified self adhesive waterproofing membrane topped with cross laminated HDPE valeron film, Dr. Fixit Samshield XL1500, having tensile strength of 3.5 N/mm2 and with minimum elongation (L/T) of 180% (as per ASTM D 882). The membrane shall have puncture resistance of 200 N (as per ASTM D 412 -06). The system includes base preparation of cleaning, brushing and removal of flacky materials, grouting the porous area with cementitious grout, proper coving between slab and wall junctions and priming the surface with cold applied bituminous primer, Dr. Fixit Torchshield primer (or equivalent), followed by installation of waterproofing membrane. The SBS membrane should be sealed properly at joints & maintaining 75 mm overlap between the membrane selvedge & 100 mm overlap on the end joints of the membrane over the surface etc. The waterproofing system should be applied by the manufacturer approved partner applicator with 10 years of warranty against leakage. Products made in India will be given preference.All vertical surfaces will be fixed using prefixed gaskets etc. complete as per manufactures specification.

3628.61

-

-

... More
a) Providing protection board of geodrain boad of 10mm thick fixed on to the membrane complete as per the specification and drawing. (In client's Scope)

3628.61

-

-

... More
Termination at vertical 3) Use a C- Shaped aluminium flashing strip or tuck it into a concrete wall of a groove of 12mmx12mm .T he aluminium flashing can be fitted to press the membrane into the groove and then be filled with a single component Dr. fixit PU sealant .

3628.61

-

-

... More
Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure, such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc.. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guaranteed for 10 years against any leakage.

2373.52

-

-

... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes ,

-

-

-

... More
finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board

15966

-

-

... More
Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mmthick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to formgrid module of size 600 x 600 mm, suspended from ceiling usinggalvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into 12x50mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws. The workshall be carried out as per specifications, drawing and as per directionsof the Engineer-in Charge.

-

-

-

... More
With 15 mm thick Tegular edged light weight calcium sliciate false ceiling tiles

10644

-

-

... More
Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ? 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.

-

-

-

... More
With 16 mm thick beveled tegular mineral fibre Antimicrobial false ceiling tile confirming to ISO 5 (class 100 ) specifications

552

-

-

... More
Providing & fixing Rockfone Stonewool Acotsical Ceiling PACIFIC High NRC (0.80), Fire Rating A1 (EN 13501-1), RH 100% (No visible deflection in high humidity), Superior Class Light Reflection, Sag Resistant 12mm thick Ceiling Tiles of size 600x600 A-Edge (Square) with AntiBacterial Properties & M1 Class Emission Certification made up with Natural Stone (Bassalt Rock) a complete Green Product & perfect suitable for any kind of False Ceiling application in builiding & costruction. The Visible side is a smooth white painted fleece, the Rear side: back fleece with complete

6049

-

-

... More
U Baffle open ceiling with fixed and demountable Torsion Spring. (Hunter Douglas/Armstrong/Knauf) Supply & Installation of torsion spring U-Baffle Ceiling System in Wooden Finish color, comprising of baffle width of 50mm and height of 150mm manufactured out of 0.6mm thick Coil Coated Aluminium of alloy AA 3105 at a module of 250mm. The baffle shall be manufactured on high speed, high precision roll forming machine with ARKU SIX Hi configuration roller levelling process to ensure the flatness and to avoid the failure of metal at corners which may occur normally on press brake machine. The coil is coated on a continuous paint line double baked and shall be stove enamelled in a continuous coil coating process of the approved colour on the exposed side and the reverse side with polyester primer. The U Baffle ceiling panels shall be mounted on coil coated customised Hat type Aluminium carrier of size 60mm * 30mm * 0.9mm thk. The customised carrier shall be suitable for both torsion spring based & standard fixed Baffle panels. The carrier shall be suspended with M6 Threaded rod hangers spaced at 1200mm c/c. Maximum upto 20% of the Total ceiling area, based on client requirement, shall be demountable torsion spring-based panels. The length of the panel shall be upto 2400mm. Suspension System: As per manufacturer standard it is recommend to have minimum gap of 250mm between plenum and its baffle top surface height for easy engagement of spring.

125

-

-

... More
Providing & Fixing laminated wooden false ceiling , made in 50x50mm Hard wood frame (Mirandi) center to center 600mm both ways, hang to ceiling with help of hanger support 'L' type G.I angle (25x25mm) and anchor bolt etc. over fixed 11mm thick ply board with 10x8mm deep groove finish with lacqure polish, 1.0 mm thick approved shade laminate to fixed on ply board, defects free bubbles free with help of adhesive. as per drawing and to the entire satisfaction of Engineer in charge. ( ply Boad & Laminate Make Green ply/Century /Merino or Equivalent ,Adhesive make Pidilite or equivalent)

1372

-

-

... More
FINISHING WORK

-

-

-

... More
Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I.

54876.75

-

-

... More
Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I.

54066.96

-

-

... More
Providing 12 mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

23232.66

-

-

... More
Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.

15488.44

-

-

... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

78109.41

-

-

... More
Finishing walls with Acrylic Smooth exterior paint of required shade,New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

17424.5

-

-

... More
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour

108943.71

-

-

... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:

2416.02

-

-

... More
Providing and fixing ARCHETON terracotta facade of U-Value 0.8 & R value of 1.25 and dimension 304*594*18 mm with modules of 300*600 with Q3** resistance to impacts (classification as per French standards) with wind resistance to positive/ negative pressure 6500 / 4500 Pa, weight of 27.13 kg per m2 which conform to standard NF EN 539-2, water absorption to be between 8% - 10% conforming to EN ISO 10545-3 § 5.1.1, bending strength not to exceed 1400 Newton conforming to EN ISO 10545-4. Installation of terracotta panels to be done by securing to the vertical T-shaped aluminium profile using the fixing clips fastened with 2 self-tapping stainless steel screws. Vertical aluminium T-shaped profiles are to be pre-punched hole with vertical spacing of 25mm. The terracotta tile is to be well-supported on four points by the clips and on its two smaller sides by the rubber gasket so as to have a very good wind load resistance of more than 6500 PA positive wind load pressure and a negative wind load pressure of 4500 PA and flexural strength of 135 da N. The total thickness cladding system is not to be more than 110 mm. The quantity of products per sq.m are to be 5.56 tiles, with quantity of profiles per main course sq.m to be 1.67 lm/m2, with quantity of clips to be 11.11 nos. per sq.m . Scaffolding and electricity for fixing to be provided by GC Approved Makes – Hunter Douglas, Soladrilho

4610

-

-

... More
ALUMINIUM WORK

-

-

-

... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for Powder coated aluminium (minimum thickness of powder coating 50 micron)

2537.69

-

-

... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

2537.69

-

-

... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in­charge. (Cost of aluminium snap beading shall be paid in basic item) :

-

-

-

... More
With float glass panes of 5.50 mm thickness

422.95

-

-

... More
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment.

24412.59

-

-

... More
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:

-

-

-

... More
a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)- cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:

-

-

-

... More
b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/ structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent biMTR.allic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.

-

-

-

... More
c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment , including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the periMTR.er for holding glass.

-

-

-

... More
d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.

-

-

-

... More
e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc.,

-

-

-

... More
enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having

-

-

-

... More
all the performance characteristics etc. all omplete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineerin-Charge.

-

-

-

... More
Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this subhead. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves ) on the external face shall be measured in SQM. up to two decimal places.

-

-

-

... More
Note:-2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 SQM from the certified laboratories accreditated by NABL (National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately. The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NBL Certified laboratories

-

-

-

... More
1. Performance Laboratory Test for Air Leakage Test (-50pa to – 300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing MTR.hod for a range of testing limit 1 to 200 mVhr” 2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331- 09 testing MTR.hod for a range up to 2000 ml.” 3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing MTR.hod for a range upto 2000 ml” 4. Structural Performance Deflection and deformation by static air pressure test (1.5 times desing wind pressure without any failure) as per ASTME- 330-10 testing MTR.hod for a range upto 50 mm”

-

-

-

... More
5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing MTR.hod for Qualitative test” Tests to be conducted on site 6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000ml”

3487.51

-

-

... More
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.25.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement

3487.51

-

-

... More
Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer- in-Charge.

348.75

-

-

... More
Providing and fixing 12mm thick toughened glass /partition,panels of minimum size . fixed to the sides of the staircase/ beams with necessary SS fasteners, either inserted in the RCC or welded. The steel surface either to be of mirror finish as approved by the client. All joints to be finished smooth.Architect/Engineer Incharge as may be necessary.)

490

-

-

... More
MISCELLANEOUS WORK

-

-

-

... More
Providing and fixing of Glass Fiber Reinforced Concrete (GFRC) Column in approved size, pattern, Design, thickness and color. The Column should be made From 53 grade white Portland cement/ 43 grade OPC or PPC gray cement manufactured by J.K. Cement or equivalent having minimum compressive Strength of 40N/mSQM, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber manufactured by Sant Gobain, Owens corning or equivalent, super plasticizers and polymers manufactured by BASF, Sika, MYK Schomburg or equivalent. The material casting should take place in Synthetic Rubber / FRP Mould manufactured by Reckli or equivalent. The Fixing of Column should be Dry Fixing i.e. to be done with Stainless Steel (SS-304)/ MS Frames, dash fasteners, Self-screw and pins. GFRC Column (35-40 mm thick) as per design with GFRC capitals. Note :- MS frame Structure for GFRC column to be provided as per design.

75.36

-

-

... More
Providing and fixing in position about 50mm thick border and 35mm thick design Jali at all levels made from Glass fibre reinforced concrete (GRC) using white cement, Quartz Sand, AR Fibres, Water Plasticizers & pigments in approved shape, size and length as per the design and drawings and as per specifications, mix design and test results given below. The typical Screen should be of sizes as per the drawings. Fixing of GRC Jali shall be with help of S.S. Screws Fixtures, M.S Angle Cleats, Fissure Plug, and Dowel Pin proper alignment as per drawings (Shop drawings to be Submitted by the contractor before the work start). As per approved paint, shade & Finishing with GRC powder & filling the joints with Epoxy sealant neatly between GRC screen and primary structures. The Screen should be in absolute straight plumb line and length and joins between channels should be neatly filed to make seamless uniform surface across the entire elevation of the building without any visibility to joints. Any framework to be paid extra as per item.(GRC Screen)

2138

-

-

... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

523.9

-

-

... More
Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical locations in load application areas that accommodates multi directional seismic movement without stress to it's components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments.

-

-

-

... More
The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions. The Self - centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in- Charge. (Material shall conform to ASTM 6063). Floor Joint of 100 mm gap

1919.68

-

-

... More
Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / centering arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall conform to ASTM 6063.) Wall Joint of 100 mm gap

169.68

-

-

... More
Providing and fixing of expansion joint system of approved make and manufacture for various roof locations as per approved drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminum base members with, self aligning and self centering arragement support plates as per ASTM B221-02. The system shall be such that it provides water tight roof to roof /roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal aluminum base member designed to accommodate various project conditions and roof treatments.

-

-

-

... More
The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions. The Self centering arrangement shall exhibit circular sphere ends that lock and

-

-

-

... More
slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, irborne contaminants and occasional foot traffic from maintenance ersonnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063.) Roof Joint of 100 mm gap

287.74

-

-

... More
Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm thick as per design for expansion joints.

-

-

-

... More
200 mm wide.

5394.38

-

-

... More
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.

860

-

-

... More
Supplying, installation, testing & commissioning of MACHINE ROOM LESS 20 passenger lift /1360kg/1.25 m/s speed / 8 floor / 8 stops / stainless steel ( 1.5mm ) Car cabin, Differently Abled people friendly. Provisions of General CPWD specifications for lift works are to be followed. Controller - Micro processer based AC variable voltage & variable frequency Control Automatic rescue device complete with dry maintenance free batteries as required. Operation - Microprocessor based Simplex Full Collective without attendant. Power - 415 V ±10%, 3 Phase, 50 H Car door - Power operated centre opening horizontal sliding stainless steel Scratch resistant Door operation - Full Height Infra-red cross-multi beam Landing doors - Centre opening, stainless steel scratch resistant at all floors. It must be fire-rated for minimum 1-Hrs and supplier must provide the certificate for the same along with material supply. Car operating Panel / Landing operating panel - Only Emergency button Inside the Car Hand rail - Shall be SS finish fixed above 900mm from the car-floor level on rear-wall or side wall. Voice announcement system - In car to announce the position of the elevator in hoist way as the car passes or stop at a floor served by the elevator Intercom system - 3-way intercom Clear Opening of Doors - 1000 X 2000 mm (Wide x Height). Makes - Johnson, Kone, TKE, Schindler

4

-

-

... More
Supplying, installation, testing & commissioning of MACHINE ROOM LESS 26 passenger lift /1768 kg/1.25 m/s speed / 7 floor / 7 stops / stainless steel (1.5mm) Car cabin, Differently Abled people friendly. Provisions of General CPWD specifications for lift works are to be followed. Controller - Micro processer based AC variable voltage & variable frequency Control Automatic rescue device complete with dry maintenance free batteries as required. Operation - Microprocessor based Simplex Full Collective without attendant. Power - 415 V ±10%, 3 Phase, 50 H Car door - Power operated centre opening horizontal sliding stainless steel Scratch resistant Door operation - Full Height Infra-red cross-multi beam Landing doors - Centre opening, stainless steel scratch resistant at all floors. It must be fire-rated for minimum 1-Hrs and supplier must provide the certificate for the same along with material supply. Car operating Panel / Landing operating panel - Only Emergency button Inside the Car Hand rail - Shall be SS finish fixed above 900mm from the car-floor level on rear-wall or side wall. Voice announcement system - In car to announce the position of the elevator in hoist way as the car passes or stop at a floor served by the elevator Intercom system - 3-way intercom Clear Opening of Doors - 1000 X 2000 mm (Wide x Height). Makes - Johnson, Kone, TKE, Schindler

10

-

-

... More
Design, supply, installation, testing and commissioning of Heavy Duty Indoor type Escalator reversible type capable of operating safely & smoothly for a period of not less than 20 hours a day, seven days a week, at an operating speed of 0.5m/sec, with width not less than 1000 mtr between interior panels, with 4 Nos. flat steps at both ends, with inclination 30 degree, rise from floor to floor up to 6.0mtrs, with electric motor, control panel, latest safety devices, cable for connections including stainless steel cladding as required, for operations on 415 volts, 3phase, 50 HZ AC with auto start and stop etc. as per detailed technical specifications with approval of Employer/Engineer-in-charge including 2 years comprehensive warranty for the complete Escalator. Makes - Johnson, Kone, TKE, Schindler

12

-

-

... More
Providing and fixing automatic bi-parting sliding doors with 12mm clear toughened glass for doors. Automatic sliding door operator - supply of automatic sliding door Set 1 operator as per approved dwg. Compliant with european standards and produced according to the guidelines for power-operated windows, doors and gates, BGR 232, the UVV and the VDE regulations. TÜV design tested, tested according to the low voltage guidelines, fulfils DIN 18650 standards Standards for Pedestrian Safety, TUV Design Tested for Durability of 1 Million Cycles. The track profile should be separate from the main profile for enabling reduction in vibration insulation. Operator length = 4150 mm, Maximum clear passage opening width = 2000 mm, clear passage height = 2500 mm, includes micro processor controlled drive unit, with self learning mechanism, program selector with knob, motion detector Nemo Motion + Nemo Dual ( Safety& Motion) Combo Pack. Silver (for Inside & Outside)*, mechanical components, toothed belt, cover profile, floor guide for frameless glass (02 nos), Five Position Program Switch with knob, safety device-light barrier (01 pair). EM Lock - Fail Safe, Body finish : standard silver anodised operator profil. UPS of 750 VA shall be provided by others, which will give power backup of 20 min. Only & if the duration of power cut to the operator is more than 30 min.,then separate arrangement needs to be done for the same as automatic operator requires uninterrupted stabilized power supply. The above work complete in all respect as per approved drawings and to the satisfaction of engineerin-charge / architect consultant.

4

-

-

... More
Providing and fixing Rolling Shutter Industries make special for rolling shutter, made out of polycarbonate section made 304.8 X 98.3 X 5 mm, corner edge, with insert hollow 166 mm x 0.9 mm MS pipe in each section till the end opening, with nylon end lock at end both side for interlocking, special 35x35x5mm angle at bottom plate with bolt, 75 mm x 2.0 mm special guide channel, rolling shaft made out of (grade no-2 ) wire spring (make Jindal make or Usha Martin ), operation with mechanical device RAMA/Gandhi make gear box, Cast iron gear rolling shaft, with 22 mm solid rod system complete or auto operation RAMA- Jailong/Gandhi automatic motor system for rolling shutter, single phase, 230 V, input power from 320 (W) to 1768 (W) NM torque 225 to 1617, lifting force from 400 kg to 1500 kg, RPM- 4.2 TO 3.3, 50 Hz, manual chain in case of power failure and control switch.

115.58

-

-

... More
Providing & fixing smoke seal at floor level comprising of 50mm thick Rock wool of density 48kg cum as manufactured by UP Twiga Fibre Glass limited or equivalent with one side tissue and the other side with aluminium foil fixed on to the aluminium frame by stainless steel screws including G.I. sheet powder coated or galvanized fixed between glass and insulation panel.

550

-

-

... More
TENSILE WORK

-

-

-

... More
Providing Design, Detailed Engineering, Supply, Fabrication, Erection, Installation and placing in position of Architectural Membrane Primary MS Steel Structure Work. Using Min 210 MPa Yield Strength Mild Steel built up tubular trusses (Plates, CHS/ RHS/ SHS ERW M.S. tube as per Indian Standards and as per approved specifications Make ISI Marked with MTC Certificate.) including cutting, hoisting fixing in position. Such as Structure are welded and bolted including special shaped washers etc. complete. Hot Finished welded type tubes in Complete and direction of Engineer-In-Charge. MS ERW CHS Pipes as per specification under "IS 1239 (Part-1, 2004), YST 210"; SHS/RHS Pipes as per specification under "IS 4923 (2009), YST 210 MPa" and MS Plate as per specification under "IS 2062, YST 210 MPa". Steel Qty. as per Final Design & Drawing Approve. Note : - Approximate Steel Consumption 3kg/ sqft. Make APOLLO/JINDAL/BHUSHAN/TATA/SAIL/ISI Mark & Equivalent

-

-

-

... More
Providing and Applying the complete structure to be Two Coat of Enamel Paint over one coat of Red Oxide primer in required DFT of (dense film thickness) for each coat in total DFT of 60 microns. The work is to be executed as per technical specification and direction of Engineer-In-Charge.(Make: - ASIAN/ MRF/ BERGER/ NEROLAC/ JOTUN & Equivalent).

-

-

-

... More
Providing, fabricating, assembling and erection of TENSILE Membrane Fabric structure with TENSILE fabric having a minimum weight of 900g/sqm ,Tensile strength 4300/4200N/5cm ,tear strength 500/500N as per particular specification with a 10 years warranty etc. over steel frames with all fittings and fixtures such as Galvanized MS Membrane /End Plate, Shackles, Rigging Screws, Turnbuckles, swedge, fork, kedar rods & galvanized MS strands/cables with stainless steel end terminals complete by a specialized sub-contractor. Rate includes cost of fabric , shop drawings, patterning, forming, cutting, fabrication, hot weld stitch of fabric, , assembling and installation with GI cables, hardware ,Aluminum flat, EPDM gasket and required accessories wherever required complete including, tools and plants, etc. Required for all operations in all respect complete as per drawing, design, specifications and as directed by Engineer-in-charge. WARRANTY ON FABRIC 10 YEARS ON PRO-RATA BASIS AS REQUIRED Providing & Supplying of GI Cable with MS End Terminals & MS Nut & washer, Diameter as per Design, Type of cable is 6x19 strands of required length of Grade1570 steel core as per specification under "IS 2266 (2002), with MS end terminals at both ends of required length as per approved drawings as Under Membrane Cables complete in all respect as per direction Of Engineer-In-Charge.

480

-

-

... More
Supply and Installation of polycarbonate multi-layer, multi-cell connectible modular panel system, a complete assembly of co-extruded UV protected polycarbonate panels incorporated into a complete system. Standing seam polycarbonate panel shall be 25mm thick (Min.) in uniform colour with an integral truss bridge structure core. In a cross section, the core shall be constructed of six walls, five cells with vertical separator in between like truss bracing structure to provide better strength to the panel. Panels shall be fixed on MS supporting structure (will be paid Separately) with 3 numbers of self-drilling screws and trapezoidal SS fasteners ensure a pull-out load of min. 7000N (7KN) tested as per ISO 6892:1998 and IS 1608: 2005. Panels junctions shall be covered with interlocking connectible connectors running lengthwise at both sides of the panel with grip-lock double tooth locking mechanism. The panels shall be solo opaque type in opaque and clear combination of louvers in single panel with seven layers to get required lux level with improved shading coefficient for Indian tropical condition and better lumen efficacy. Panels with more layers will be preferred for better insulation and improved shading coefficient. Panel shall have a minimum modular width of 1200 mm for minim junctions.U value shall not be more than 1.6 Watt/m2K as per EN ISO 1077-2:2018 and respective third-Party test certificate shall be produced before procurement. Panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a min. of 500 Hours as per ASTM G 155.Panels shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. Panel shall be with additional End cap/Aluminum U/F profile/ Glazing Bar (all aluminium shall be factory / mill finish) for ends as required. Panel shall be fixed over MS supporting structural (paid separately) conforming to the detail technical specifications as per approved architectural drawings. Trained and factory nominated applicators with supervision to complete the entire panel installation as per drawing and direction of the engineering in charge.

460

-

-

... More
INTERIOR FINISHING WORK

-

-

-

... More
Providing and Fixing reception backdrop panneling 150mm thick size as per drawing , made in hard wood frame(mirandi wood) 50mm x 50mm thick & c/c 600mm maximun both ways joint rigidly horizontally & vertically with nails, screws etc. fixed to wall/ceiling & columns with wooden plugs. 11 mm thick MDF Board is to be fixed on top of frame with 10x8 mm deep grooves on both sides of the center panel. 11mm MDF Board is to finished with laminate on both side of approved design and all groves to be finished with laminate shade. Center panel is of 19mm MDF jali /Engg. stone cladding of aprooved design and of size: The visible part through MDF Jali is to be finished with lacqured glass of approved design. All work is to be carried out as per drawing and instructions of engineer in charge. ( MDF Board/ MDF Jali & Laminate Make Green ply/Century /Merino or Equivalent ), (Adhesive make Pidilite or equivalent)

170

-

-

... More
Providing and Fixing reception backdrop panneling 150mm thick size as per drawing , made in hard wood frame(mirandi wood) 50mm x 50mm thick & c/c 600mm maximun both ways joint rigidly horizontally & vertically with nails, screws etc. fixed to wall/ceiling & columns with wooden plugs. 11 mm thick MDF Board is to be fixed on top of frame with 10x8 mm deep grooves on both sides of the center panel. 11mm MDF Board is to finished with 4mm veneer on both side of approved design and all groves to be finished with shade. Center panel is of Engg. stone cladding of aprooved design and of size: The visible part finish with melamine polish and mirror polish of approved design. All work is to be carried out as per drawing and instructions of engineer in charge. ( MDF Board/ MDF Jali & veneer Make Green ply/Century /Merino or Equivalent ), (Adhesive make Pidilite or equivalent)

64.8

-

-

... More
P/Fixing Wall paper as per approved brand and manufacture to give an even shade and color as approved by architect. & instructionof Engineer in charge.

500

-

-

... More
Providing and Fixing MDF Wall Panneling made in hard wood frame (mirandi) 35mm x 50mm thick c/c 600mm horizontally & vertically, fixed to wall/columns with wooden plugs,then 11 mm thick Medium Density Fiber Board fixed on top of frame with 10x8 mm deep Groove & same finished with 1.0 mm thick laminate of approved quality pasted with the help of adhesive with provision of pin up board for backlit , making of niche as /dwg fixed nails screws etc. All grooves to be finished with lacquer polish maching with laminate shade as per Technical specification, drawing and instructions of Engineer in charge. (MDF Board & Laminate Make Green ply/Century /Merino or Equivalent, Adhesive make Pidilite or equivalent)

850

-

-

... More
Providing & Fixing Translucent Roller Blinds Over Window Opening With Arrangement Of Closing & Opening With G -String, Complete In All Respects As Per Design And Instruction Of Engineer In Charge. (Make Vista / Mac Or Equivalent,Fabric Model No. Equivalent To Echo (Vista) / Abstract /Silky/ Ribcord/Drizzle/Trans)

2816.7

-

-

... More
Providing and Fixing MDF Jali with frame of size as/drawing made in 19mm mdf board, to be cut in a disffernt shape and pattern as per design approved by architect & the same jali is to be finished with high gloss Duco paint (both sides)as/colour approved on mdf surface brushing the surface free from foreign matter, sand papering smooth, filling in all holes and applying surface and sealer for base preparation before coting selected color high gloss Duco complete as per specifications, and then fixed with in the existing mdf frame work with nails, screws etc.to entire satisfaction of Engg in charge/ Architect matching with veneer shade. All work is to be carried out as per drawing and instructions of engineer in charge.

150

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
Supplying and stacking of good earth at site including royalty and carriage up to 1 km (earth measured in stacks will be reduced by 20% for payment).

4500

-

-

... More
Supplying and stacking at site dump manure from approved source, including carriage up to 1.0 km (manure measured in stacks will be reduced by 8% for payment)

-

-

-

... More
Screened through sieve of IS designation 20 mm

112.49

-

-

... More
Screened through sieve of IS designation 16 mm

112.49

-

-

... More
Screened through sieve of IS designation 4.75 mm

112.49

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
Supplying and stacking of well decayed cow dung manure at site including royalty and carriage up to 1.0 km (cow dung manure measured in stacks will reduced by 8% for Payment)

337.5

-

-

... More
PREPARATION WORKS

-

-

-

... More
Fine dressing of the ground

10000

-

-

... More
Mixing earth and sludge or manure in the required proportion specified or directed by the Engineer-in-charge

5175

-

-

... More
Spreading of sludge, dump manure and / or good earth in required thickness as per direction of Engineer-in-charge (cost of sludge, dump manure and / or good earth to be paid separately).

5175

-

-

... More
Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts

2000

-

-

... More
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately)

-

-

-

... More
Holes 1.2 m diameter and 1.2 m deep

70

-

-

... More
Holes 90 cm diameter and 90 cm deep

570

-

-

... More
Holes 60 cm diameter and 60 cm deep

100

-

-

... More
MAINTAINANCE WORK

-

-

-

... More
Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, edge, flower beds, foliages, creepers etc. including hoeing, weeding, pruning, replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers (whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide will be provided by the Department & lawn mover and brush cutter with fuel and other T & P material/articles shall be provided by the contractor.) and as per direction of officer in charge.

120000

-

-

... More
Providing and stacking of Delonix regia (Gulmohar) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.v

100

-

-

... More
Providing and stacking of Cassia fistula (Amaltash) of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.

100

-

-

... More
Providing and stacking of Dalbergia sissoo (Seasam) of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge

75

-

-

... More
Providing and stacking of Ficus bengalensis (Bargad) of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.

75

-

-

... More
Providing and stacking of Ficus religiosa (Peepal) of height 150-165 cm. in big poly bags of size 30 cm as per direction of the officer-in-charge.

50

-

-

... More
Providing and stacking of Ficus bengalensis (Bargad) of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.

50

-

-

... More
Providing and stacking of Jasmine grandiflorum (chameli) of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. .

75

-

-

... More
Providing and stacking of Saraca indica (Sita Ashok) of height 105-120 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.

75

-

-

... More
Providing and stacking of Azadirachta indica ( Neem ) of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge.

75

-

-

... More
Providing and stacking of Bauhinia purpurea (Kachnar) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.

75

-

-

... More
Providing and stacking of Bottle palm of ht. 150-180 cm bottom girth 20-25 cm well developed in big poly bags of size 25 cm as per direction of the officer-in-charge.

75

-

-

... More
Providing and stacking of Spathodea campanulata of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.

75

-

-

... More
Providing and stacking of Plumeria alba of height 165-180 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge.

50

-

-

... More
Providing and stacking of Plumeria rubra of height 120-150 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge.

50

-

-

... More
Providing and stacking of Largerstroemia indica of height 90-105 cm. multibranched in poly bags of size 25 cm as per direction of the officer-in-charge.

75

-

-

... More
Providing and stacking of Polyalthia longifolia (Ashok) of height 150-165 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge

75

-

-

... More
Providing and stacking of Tectona grandis (Teak) of height 150-165 cm. in big polybags of size 25 cm as per direction of the officer-in-charge.

75

-

-

... More
Providing and stacking of Tamarindus indica (Imli) of height 120-150 cm. in big polybags of size 25 cm as per direction of the officer-in-charge

75

-

-

... More
Providing and stacking of Mangifera indica (Mango-grafted ) of height 60-75 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge.

75

-

-

... More
Providing and stacking of Eugenia jambolana (Jamun) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.

75

-

-

... More
Providing and stacking of Phyllanthus emblica (Amla) of height 150-165 cm. in Big HDPE Bag as per direction of the officer-in-charge.

75

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
PALM

-

-

-

... More
Providing and stacking of Foxtail palm of ht. 240-270 cm bottom girth 35- 40 cm well developed in big size HDPE bags as per direction of the officer-in-charge.

200

-

-

... More
Providing and stacking of Bottle palm of ht. 210-240 cm bottom girth 30-35 cm well developed in big HDPE bags.

200

-

-

... More
Providing and displaying of Areca Palm having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.

200

-

-

... More
Providing and Displaying Travelers palm well developed with fresh & healthy leaves foliage 210 to 240 cm ht specimen in 40 cm Cement Pot as per direction of the officer-in-charge.

30

-

-

... More
Providing and Displaying Bismarckia Palm 115 to 180 cm ht., well developed 12 and above good color fresh and healthy leaves in 40 cm Cement Pot as per direction of the officer-in-charge.

30

-

-

... More
Providing and displaying of Phoenix palm having ht. 75 cm to 90 cm with 10 to 15 or more leaves, well developed, fresh and healthy in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.

30

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
BAMBOO

-

-

-

... More
Providing and Displaying Bamboo Buddha vally variety with umbrella shape having 120 to 135 ht. with fresh & healthy foliage well developed in 40 cm Cement pot multy branch, bushy as per direction of the officer-in-charge.

50

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
SHRUBS

-

-

-

... More
Providing and stacking of Clerodendrum inerme having ht. 25 cm to 30 cm multi branched in 20 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.

20000

-

-

... More
Providing and stacking of Ficus panda of height 90-105 cm. with 10-12 branches and healthy foliage, well formed in cement pots of size 30 cm as per direction of the officer-in-charge.

500

-

-

... More
Providing and Displaying Ficus Starlight with fresh, healthy and attractive foliage 45 to 60 cm spread 75 to 90 cm ht., specimen bushy ,in 35 cm Cement Pot as per direction of the officer-in-charge.

20

-

-

... More
Providing and stacking of Gardenia jasminoides of height 45-60 cm. with 34 branches in earthen pots of size 20 cm as per direction of the officer-in-charge.

500

-

-

... More
Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushty shape with fresh and healthy leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.

600

-

-

... More
Providing and stacking of Hamelia patens of height 30-45 cm. with 3-4 branches in poly bags of size 20 cm as per direction of the officer-in-charge.

3000

-

-

... More
Providing and stacking of Hibiscus rosasinensis of height 45-60 cm. with 3-4 branches in earthen pots of size 20 cm as per direction of the officer-in-charge.

1000

-

-

... More
Providing and displaying of Raphis palm having ht. 75 cm to 90 cm with 12 to 15 equal suckers, well developed, full of fresh & healthy leaves from bottom to top in 25 cm size Earthen pot/Plastic pot & as per direction of the officer-in-charge.

100

-

-

... More
Providing and stacking of Tecoma gaudichaudi of height 45-60 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge.

800

-

-

... More
Providing and stacking of Tabernaemontana coronaria (chandni variegated) of height 45-60 cm. with 3-4 branches earthen pots of size 20 cm as per direction of the officer-in-charge.

200

-

-

... More
Providing and stacking of plant Canna dwarf of height 25 to 30 cm., 2 to 3 suckers in earthen pots of size 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.

200

-

-

... More
Providing and Displaying Standard Rose (H.T. variety) 3 to 4 healthy branch 90 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge.

100

-

-

... More
Providing and Displaying Topiary of Ficus Panda well developed with fresh & healthy foliage with 3 to 4 Ball and 60 to 75 cm spread each Ball, 135 to 150 cm ht., in 35 cm Cement Tray /Cement Pot as per direction of the officer-in-charge.

50

-

-

... More
Providing and Displaying Marigold jaffri orange/yellow/Russet colour well developed with fresh & healthy foliage with 40 to 50 flowers in bloom specimen plant 60 to 75 cm ht in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.

50

-

-

... More
Providing and displaying of Dracaena Song of India variegated having ht. 30 cm to 45 cm, well developed, fresh & healthy foliage with bright leaves in 20 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.

50

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
GROUND COVERS

-

-

-

... More
Providing and stacking of Alternanthera species of height 15 cm to 20 cm, full of branches and foliage in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.

1000

-

-

... More
Providing and stacking of Chlorophytum (Green), full of leafy suckers in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.

1000

-

-

... More
Providing and stacking of Jatropha multifida (red colour) of height 45-60 cm. with 2-3 branches in earthen pots of size 20 cm as per direction of the officer-in-charge.

1000

-

-

... More
Providing and stacking of Asparagus sprengeri of height 30 cm to 45 cm, full of leafy branches in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge..

1000

-

-

... More
Providing and stacking of Syngonium (Butterfly) variegated with 2-3 suckers healthy foliage in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge.

1000

-

-

... More
Providing and stacking of Tradescantia, full of leaves in Earthen Pot/Plastic Pot of size 15 cm. as per direction of the officer-in-charge.

1000

-

-

... More
GRASS

-

-

-

... More
Providing & laying Selection no. 1 doob grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same maintenance for 30 days or more till the grass establish properly,as per direction of officer in charge

1000

-

-

... More
CARRAIGE OF MATERIALS

-

-

-

... More
SAND (UPTO 10KM LEAD)

17921.64

-

-

... More
CHIPS( UPTO 22 KM LEAD)

20918.42

-

-

... More
METAL ( UPTO 22 KM LEAD)

1693.07

-

-

... More
BRICKS ( UPTO 8 KM LEAD )

3600.76

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
PLUMBING WORK

-

-

-

... More
Supplying, fitting and fixing 40mm high vitreous white glazed earthen E.W.C. with ‘p’ trap of parry hindustan or any other approved I.S.S. make including supplying and fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I.handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450grams 15mm P.V.C. alkathene pipe 45cm. long with brass coupling at both ends and white/black plastic solid state seal and lead of commander/cuckoo or other I.S.S. make with hinges or screws etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide priming, all complete as per specification and direction of E/I.

-

-

-

... More
(ii) E.W.C. with 'S' trap

-

-

-

... More
(b) 10 lit. low level PVC Cistem

265

-

-

... More
Supplying , fitting and fixing vitreous white glazed earthen ware I.W.C of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I 'p' trap 15 liters C.I.pull and let go flushing cistren of names or other I.S.S. equivalent make , complete with all fitting , C.I.or C.C. brackets 32mm alkathene/P.V.C telescopic flush , pipe about 2 M long with one brass coupling and clamps GI ,chain and pull including supplying and fixing a pair of vitreous white glazed earthenware ware footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less thane 50grms. 15mm P.V.C. connection pipe 450 mm. long and the exposed pipe and cistern with two coats of approved paint over a coats of red oxide primer etc. all complete as per specification and direction of E/I.

-

-

-

... More
(A) 580 mm. long

-

-

-

... More
(c) With 10 lit. low level PVC Cistem

78

-

-

... More
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.

90

-

-

... More
Supplying fitting and fixing vitreous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S. approved make supported on painted C.I. or R.S. brackets 32mm C.I.brass waste, 15 mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I.

217

-

-

... More
Supplying fitting and fixing white glazed fire’s clay sink of approved make with overflow arrangements supported on C.I. or R.S. painted brackets 40mm. dia C.P.brass waste with C.P.brass chain and rubber plug 40 mm dia P.V.C. waste pipe about 750mm long with brass coupling at one endand 15mm C.I. body brass spindle bib cock of approved quality of weight not less than 450grams. including cutting wall and making good the same etc. all complete as per specification and direction of E/I.

-

-

-

... More
(i) Kitchen sink 600 mm x 450 mm x 250 mm

4

-

-

... More
(b)Mirrors of 6mm thick plate glass bevelled edge mirror including C.P. brass revolving fittings 3mm ply wood board and C.P. hinges to fix with mirror.

-

-

-

... More
(i) 600mm x 450mm size

18

-

-

... More
(c) (i) C.P. brass towel rail 20mm x600mm with bracket container

30

-

-

... More
(c)(iii) C.P. brass liquid soap container

153

-

-

... More
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitionsby cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.

-

-

-

... More
Granite Stone of approved shade

90

-

-

... More
Provinding and fixing wash basin wih C.I brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls whereever required :

-

-

-

... More
White Vitreous China Wash basin size 550x400 mm with a 15mm CP Brass single hole basin mixer

2

-

-

... More
Providing and fixing white vitreous china laboratory sink with CI brackets , C.P brass chain with rubber plug 40 mm C.P brass waste and 40 mm CP brass trap with necessary C.P brass unions complete including painting of fittings and brackets , cutting and making good the wall wherever required :

-

-

-

... More
Size 600x450x200 mm

48

-

-

... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in charge.

265

-

-

... More
Providing & fixing PVC waste pipe for sink including PVC waste fitting Complete

-

-

-

... More
Flexible Pipe

-

-

-

... More
32mm Dia

50

-

-

... More
Providing and fixing toilet paper holder :

-

-

-

... More
C.P. brass

265

-

-

... More
Providing & fixing PTMT towel ring trapezoidal shape 215 mm long 200 mm wide with minimum distance of 37 mm from wall face with concealed fittings arrangement of approved quality and colour weighing not less than 88 gms

153

-

-

... More
Providing and fixing uplasticised PVC connection pipe with brass unions :

-

-

-

... More
15 mm nominal bore

447

-

-

... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.

-

-

-

... More
15 mm nominal bore

40

-

-

... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 a) 15 mm nominal bore.

-

-

-

... More
15 mm nominal bore

447

-

-

... More
Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms

265

-

-

... More
Providing and fixing of 3 star water rated wall mounted European Water Closet including cistern, Flush plate with all accessories Make Jaquar: Cat. No.: FLSWHT-5953PPSM Size (EWC): SIZE:355X555X370 MM Size (CISTERN): 46 x 45 x 8 cm (JCS-WHT-2400)

2

-

-

... More
Fixing, testing and commissioning CP Soap dispenser with CP brass wall brackets and CP brass screws complete as required DOLPHY RANGE:- 304 SS FINISH (1200 ML) CODE:- DSDR0146

2

-

-

... More
Supply and installation of Kimberly-Clark Aquarius Multi Fold Paper Towel Dispenser 70220 - M Fold Paper Towel Dispenser - 1 X White Paper Towel Dispenser (23.2 cm x 28 cm x 11.6 cm)

2

-

-

... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm

2

-

-

... More
Providing, Fixing, testing and commissioning of C.P. PILLAR COCK AUTO CLOSING SYSTEM  Make Jaquar Cat No.:PRS-CHR-031

2

-

-

... More
Fixing, testing and commissioning C.P. HAND SHOWER (HEALTH FAUCET) WITH 1 METER LONG EASY FLEX TUBE IN CHROME FINISH & WALL HOOK  complete in all respects as per direction of Engineer-Incharge - For All toilets Make Jaquar Cat No.: ALD-CHR-565

2

-

-

... More
Providibng and fixing straight type Macfit single body push fit type WC pan connector with factory supplied spring loaded seal guard of McAlpine, UK with integral single mould sealing fins made of flexible EVA body, including bush/adaptor for use with C.I. Pipe as supplied with the pan connector.

265

-

-

... More
Providing and fixing CP brass single lever low flow Sink mixer with 15 mm CP brass single lever pillar cock with pop up and waste complete including cutting and making good the walls where required.

50

-

-

... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing complete as required.

115

-

-

... More
Providing & Fixing of Grab Bar size 300mm long in handicap toilet complete as required.

18

-

-

... More
Providing,Fixing satin finish stainless steel AISI 316 grade wall mounted coat hook on door complete. The rate include cost of all material & labour involved in the item complete and all as per direction of engineer incharge.

265

-

-

... More
Providing, Installing & fixing storage type water heater of approved shade with copper container, glasswool insulation,stove enamelled M.S jacket, thermostatically controlled inner heater with pilot neon lamps, 15mm inlet stop cock valve, on inlet connection, 15mm dia C.P flexible connection pipe in inlet & outlet suitable for working pressure of 8 kg/sqcm complete as required.

-

-

-

... More
Capacity 25 litres

50

-

-

... More
Capacity 35 litres

4

-

-

... More
Supply, installation, testing and commissioning built with Drinking Water R.O. unit with micron filtration pre-treatment unit, skid mounted R.O. module with pressure pump and pressure tank, drinking water cooler (High quality SS Tank for Storage 80 lts) , complete in all respects.

25

-

-

... More
TOTAL FOR SUB HEAD - 01 CARRIED TO SUMMARY OF PRICES

-

-

-

... More
SUBHEAD-02: DRAINAGE WORK

-

-

-

... More
Providing, Fixing, testing and commissioning of UPVC pipe SWR type 'B' conforms to IS : 13592-1992 with all fittings such as bends, tees, elbow, 'Y', offset, cleaning pipe door, clamps and steel structural supports etc. including cutting the floors, walls and making good the same in cement concrete 1:2:4 & cement mortar 1:4. The wall thickness of pipe and technical characteristic conforms to IS : 13592-1992 type 'B'. The fitting dimension conforming to IS : 14735-1999. The jointing to be completed with rubber ring joint/solvent weld joint. (soil waste and rain water pipe)

-

-

-

... More
75 mm diameter pipe

575

-

-

... More
100 mm diameter pipe

4805

-

-

... More
160 mm diameter pipe

1205

-

-

... More
Providing, Fixing, testing and commissioning of UPVC 'P' trap/floor trap/urinal trap of self cleansing design with or without horn conforming to IS : 14735-1999 including setting with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 hard stone ballast 20 mm nominal size) cutting and making good the walls & floors.

-

-

-

... More
110 mm (OD) x 110 mm (OD)

270

-

-

... More
Providing, fixing & testing uPVC pipes, conforming to IS 4985 class 3 (6 kg/cm2) including injection moulded fittings, jointing with solvent cement, cutting and making good the floors and walls and jointing to trap/waste pipe, complete of outer dia. (Indirect waste)

-

-

-

... More
40 mm diameter pipe

295

-

-

... More
Providing, Fixing UPVC floor drain including all fitting and accessories fixed in cement mortar complete in all respect. 110 mm OD x 63 mm OD

295

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
Providing and fixing PTMT grating of approved quality and colour.

-

-

-

... More
125 mm nominal dia with 25 mm waste hole

565

-

-

... More
Providing, fixing and testing of uPVC SWR inlet fittings with two or three saddle inlets of 40, 50 or 75 mm size, fabricated from 110 mm outer dia uPVC pipes and fixed to uPVC traps with solvent cement joint complete in all respect.

325

-

-

... More
Providing & fixing uPVC clean out plug with suitable opening with threaded uPVC socket fixed to uPVC pipe joints as required complete in all respects.

-

-

-

... More
110 mm dia

85

-

-

... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) alround 100mm dia. SW / CI / waste pipes including bed concrete as per standard design

50

-

-

... More
TOTAL FOR SUB HEAD - 02 CARRIED TO SUMMARY OF PRICES

-

-

-

... More
SUBHEAD-03: WATER SUPPLY WORK

-

-

-

... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

150

-

-

... More
Providing and fixing G.I. pipes complete with GI fittings and clamps including cutting and making good the walls etc. (Exposed on wall Terrace)

-

-

-

... More
20 mm dia, nominal bore

72

-

-

... More
25 mm dia, nominal bore

69

-

-

... More
32 mm dia, nominal bore

213

-

-

... More
40 mm dia, nominal bore

229

-

-

... More
50 mm dia, nominal bore

325

-

-

... More
65 mm dia, nominal bore

475

-

-

... More
80 mm dia, nominal bore

206

-

-

... More
Making connection of GI distribution branch with GI main of 50-80mm nominal bore by providing and fixing tee, including cutting and threading the pipe etc. complete.

-

-

-

... More
25 to 40 mm nominal bore

25

-

-

... More
50 to 80 mm nominal bore

15

-

-

... More
Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends)

-

-

-

... More
20mm nominal bore

77

-

-

... More
25 mm dia, nominal bore

63

-

-

... More
32 mm dia, nominal bore

79

-

-

... More
40 mm dia, nominal bore

4

-

-

... More
50mm nominal bore

10

-

-

... More
65mm nominal bore

10

-

-

... More
Painting GI pipes and fittings with two coats of anti corrosive bitumastic paint of approved quality

-

-

-

... More
20 mm dia, nominal bore

72

-

-

... More
25 mm dia, nominal bore

69

-

-

... More
32 mm dia, nominal bore

213

-

-

... More
40 mm dia, nominal bore

229

-

-

... More
50 mm dia, nominal bore

325

-

-

... More
65 mm dia, nominal bore

475

-

-

... More
80 mm dia, nominal bore

206

-

-

... More
Providing and fixing G.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete.

-

-

-

... More
20mm nominal bore

1

-

-

... More
25mm nominal bore

1

-

-

... More
32mm nominal bore

1

-

-

... More
40mm nominal bore

1

-

-

... More
50mm nominal bore

2

-

-

... More
65mm nominal bore

3

-

-

... More
80mm nominal bore

12

-

-

... More
Providing and fixing chlorinated poly vinyl chloride (CPVC) pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fitting, including fixing the pipewith clampsat 1 m spacing. This includesjointing of pipes &fittingwith one step CPVC solvent cement and cost ofcutting chases and making good the same including testing ofjoints complete as per direction of Engineer in Charge.(Concealed work including cutting chases and making good the walls etc.)

-

-

-

... More
15mm nominal outer dia. Pipes.

3438

-

-

... More
20mm nominal outer dia. Pipes.

2160

-

-

... More
25mm nominal outer dia. Pipes.

1457

-

-

... More
32mm nominal outer dia. Pipes.

1075

-

-

... More
Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) :

-

-

-

... More
50mm diameter

2

-

-

... More
Providing and fixing Bronze compact(Screwed) Diaphram type pressure reducing valve (PRV) with strainer deliverying desired rate of flow. The complete system is tested to a pressure not less than 16 Kg / Sq.cm and suitable to reduce the pressure upto 1 Kg/Sq.cm) including flanges / unions, nuts, bolts and washers complete as required.

-

-

-

... More
15 mm dia

1

-

-

... More
20 mm dia

3

-

-

... More
25 mm dia

5

-

-

... More
40 mm dia

2

-

-

... More
50 mm dia

6

-

-

... More
Butterfly valve (manual) with C.I body SS disc nitrile sheet & O ring & PN 16 Pressure rating as specified 100 mm nominal bore

-

-

-

... More
50 mm dia.

10

-

-

... More
65 mm dia.

10

-

-

... More
80 mm dia.

2

-

-

... More
100 mm dia.

1

-

-

... More
Constructing masonry Chamber 60x45x50 cm,inside with 75 class designation brick work in cement mortar 1:5 (1 cement:5 fine sand) for water meter complete with C.I. Doble flap surface box 400x200x200mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 corase sand: 4 graded stonr aggregate 20mm nominal size) necessary excavation foundation concret 1:5:10 (1 cement:5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortor 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design.

-

-

-

... More
With F.P.S. bricks

4

-

-

... More
Providing and fixing M.S fabricated hot dipped galvanized coating puddle flange comprising of 600 mm dia long M.S class 'B' pipe (screwed end up to 50 mm & flange for more than 50 mm dia) with 6 mm thick M.S plates of required size including cutting holes in centre of plate, inserting pipe & making welded (Arc) joint complete. Same shall be installed with TEC welded joint in position with reinforcement bars of RCC tank wall/slab including making cutout in shuttering during concrete casting of tank of following diameter. (Under Ground Overhead Tanks.)

-

-

-

... More
25mm dia pipe, 600mm long with size of 250x250x6 mm MS plate

2

-

-

... More
32mm dia pipe, 600mm long with size of 250x250x6 mm MS plate

1

-

-

... More
40mm dia pipe, 600mm long with size of 300x300x6 mm MS plate

1

-

-

... More
50mm dia pipe, 600mm long with size of 300x300x6 mm MS plate

1

-

-

... More
65mm dia pipe, 600mm long with size of 350x350x6 mm MS plate

2

-

-

... More
80mm dia pipe, 600mm long with size of 400x400x6 mm MS plate

2

-

-

... More
100mm dia pipe, 600mm long with size of 400x400x6 mm MS plate

4

-

-

... More
150mm dia pipe, 600mm long with size of 450x450x6 mm MS plate

8

-

-

... More
200mm dia pipe, 600mm long with size of 450x450x6 mm MS plate

4

-

-

... More
Providing, Fixing, Testing & Commissioning of nitrle rubber insulation on hot water supply pipes. K-Flex, A-Flex, Armacell. The rate include cost of all material & labour involved in the item complete and all as per direction of engineer incharge.

-

-

-

... More
15mm (9 mm thickness)

995

-

-

... More
20mm (9 mm thickness)

470

-

-

... More
25mm dia (9 mm thickness)

150

-

-

... More
32mm dia (13 mm thickness)

110

-

-

... More
40mm dia (13 mm thickness)

100

-

-

... More
50mm dia (13 mm thickness)

50

-

-

... More
65mm dia (19 mm thickness)

5

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
Solar Water Heating System-500 LPD (Location Terrace OPD BLOCK)

-

-

-

... More
Providing and fixing Solar Hot Water indirect Heating System using heating liquid medium comprising of flat plate solar panels, including all interconnecting insulated G.I. piping, primary and secondary recirculation pumps, pressure type insulated hot water tank, , outlet, Y stainer and a water meter on the inlet, air release valve all mounted on galvanized MS sections complete with connection with the existing piping. Comparising of following:-(location Terrace)

-

-

-

... More
Five Nos of. flat plate solar collector panels of 8 Sqm size approx. the panels enclosed in insulated collector boxes with single piece toughned glass 4 mm thick and fixed with heat resistant gasket.

-

-

-

... More
One No. Integrated heat exchanger with drain down vessel 9 Ltrs. Capacity,designed so as to provide heat exchange between solar collectors and 500 ltr tank complete with drain down tank. The cold water heated after passing through heat exchanger to be stored in hot water tank. Necessary pumps and controller for automatic operations to be provided. including MS painted frames for the same.

-

-

-

... More
M.S Horizontal hot water mixing tank of 500 ltr capacty shall be made out by of 4mm thick M.S. plate and inside lining of 1.0 mm thick stainless steel grade 316 sheet , out side steel primer including 50 mm thick rock wool slab insulation (density of glass wool 64 Kg/Sqm.) & 24 SWG aluminum sheet cladding outside the tank. Tank shall be provided with flanges for inlet outlet, over flow/ drain connection & Vent pipe with M H cover of 450 mm internal dia., Temperature and pressure release valve should be on top of water storage tank All the valve & accessories shall be suitable for an operating pressure of 6.0 kg/sqm including electric back up of 1 x 4.5 KW

-

-

-

... More
Primary circulation pump 2 Nos (1W+1S) for circulation of fluid from Solar panels to heat exchanger.

-

-

-

... More
Secondary circulation pump 2 Nos (1W+1S) for circulation of fluid from heat exchanger to hot water mixing tank.

-

-

-

... More
One Lot of Inter-connected insulated G.I. piping insulated with 9 mm thick nitrile rubber heat resitant insulation sections ( Vidoflex or equiv.) and valves with outer mechanical protection of aluminium sheet cladding.

-

-

-

... More
Solar Water Heating System as Describe Above

-

-

-

... More
Supply , instalation, testing & commissioning of Cubical type branch distribution boards( BDB) of the following types made out of 14 gauge (2 mm thick) CRCA sheet complete with the accessories i/e. interconnections with suitable copper solid strip connections 100 A & above and with copper wires below, painting etc. and complete with supplying & fixing the following boardsetc. as required.

-

-

-

... More
Branch Distribution Board for 500 LPD System

-

-

-

... More
1 No. 125 AMP rating TP Modulded case circuit breakers with neutral link, front operated handle & thermal magneticrelease (35 Ka)

-

-

-

... More
1 Set 125 Amp 4 Bars Tinned Cu. Bus Bar

-

-

-

... More
1 Set LED type Indication lights

-

-

-

... More
1 No. Digital Voltameter (0-500 V)

-

-

-

... More
1 No. Digital Ammeter (0-125 A )

-

-

-

... More
1 Set CTs for Ammeter 125/5 A ratio

-

-

-

... More
2 Nos. Selector Switched for Voltmeter & Ammeter

-

-

-

... More
3 Nos. 2 A SPMCB

-

-

-

... More
Outgoing

-

-

-

... More
08 Nos 25 A TP MCB , 10 KA (6+2 Spare)

-

-

-

... More
06 Nos. Auto DOL Starter for 0.5 KW motor. Each shall have Auto/ Manual selector switch, over load relay, single phasing preventor, ON/OFF/ Trip indication lamps, ON/OFF push Buttons, contactor.

-

-

-

... More
03 Nos 63 A TP MCB , 20 KA for Electric back up supply.

-

-

-

... More
The System is based on temprature difference and the system will operate automatically based on thermostat for startup and shutdown of Primary,Secondry, Receiculation pump and Heating elements on temprature differential.

-

-

-

... More
Electric Panel as Describe Above.

5

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
HOT WATER GENERATION SYSTEM (OPD BLOCK)

-

-

-

... More
Supply, installion, testing and commissioning of Hot Water Generation Plant with Packaged type Air to Water Heat Pump. These units shall be completely factory assembled including 2 Nos. Scroll Hermatically Sealed Scroll Compressor(s), evaporator, Condenser and Microprocessor Control Panel etc with R410 Referigerant and COP between 3-4. The Heat Pump shall have inbuilt hot water heat exchanger, pumps, valves. expansion valve, integrated CIP system and other accessories.The Heat Pump should be capable of producing hot water at minimum 60°C temperaure at outlet (condenser circuit) temperatures at 10°C ∆T. The Machine should have an operating ambient temperature range of 5°C to 40°C. Location: Terrace Level

-

-

-

... More
a. Built in electric panel as per safety norms as manufacturer standard.

-

-

-

... More
b. All other mountings, fittings & controls with all accessories and safeties

-

-

-

... More
c. All other mounting, fittings and controls.

-

-

-

... More
d. Suitable for electric supply of 415 + 10% volts & 50 Hz.

-

-

-

... More
e. All interconnecting wiring / cabling between heat pump and electrical panel.

-

-

-

... More
f. The Heat pump shall have an in-built facility to start / stop depending on variation in demand at different periods.

-

-

-

... More
g. System shall be complete with SS 304 Tank of 2 Hrs Storage Capacity, Primary and Seconary Circualtion pumps, Heat Exchangers, Return Recirculation Pump, interconnecting piping, valves and all accessories as required.

-

-

-

... More
h. System shall have 20% of total capacity in electrical heating as standby.

-

-

-

... More
i. System shall have an integrated Solar Heating system with 20% of total capacity for energy saving including Flat Plate Solar Panels, Mixing Tanks, Recirculation Pumps, etc

-

-

-

... More
following capacity required for block wise specification as same for all Heat pump.

-

-

-

... More
For OPD Block

-

-

-

... More
Heating capacity : Approx. 200 KW (100 KW x 2 working + 0 standby)

-

-

-

... More
SS 304 Hot Water Storage Tank : 5000 Ltrs x 1 Nos

-

-

-

... More
Solar Water Heating 20% - 52 Flat Plate Collector with 1000 Lit tank with coil

1

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
Reverse Osmosis Plant (RO) Hospital Block- suitable for 10 hrs operation including filter feed pumps,multigrade sand filter, activated carbon filter, antiscalant dosing, acid dosing, micron cartridge filter, RO high pressure pumps, RO moules, RO Cleaning System, valves, interconnected piping and accessories.

-

-

-

... More
Expected Treated water characteristics after RO Treatment

-

-

-

... More
PH - 6.0-7.0

-

-

-

... More
Total dissolved Solids - 50 ppm

-

-

-

... More
Suspended Solids - NIL

-

-

-

... More
Turbidity - As per IS:10500

-

-

-

... More
Iron as Fe - NIL

-

-

-

... More
Total Harness - Less Than 5 ppm

-

-

-

... More
Permeate water quantity = 500 lit/hr. described above (a) to (m).

-

-

-

... More
following capacity required for block wise specification as same for all Heat pump.

-

-

-

... More
500 LPH RO FOR OPD BLOCK

2

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
HYDRO-PNEUMATIC SYSTEM (OPD BLOCK)

-

-

-

... More
Supply, Installation, Testing And Commissioning Of Compact Self Contained Skid Mounted Hydropneumatic System (Variable Speed) As Follows:

-

-

-

... More
a. Vertical, In-Line, Multisage, centrifugal pumps with SS-304 casing and impeller and SS-316 shaft, CI base & head TEFC motor (with mechanical seal)

-

-

-

... More
(Vendor to submit performance curves and technical catalog of the proposed model for review & information)

-

-

-

... More
The pump shall be selected for performance at best efficiency point. However, the pump selection shall be suitable for performance with set point @ + 20% of the rated head.

-

-

-

... More
b. External Pump mounted or wall mounted microprocessor PID controller(VFD) and frequency inverter integrated in a single body or as separate components with pressure sensor transmitter minimum two lined LCD display, diodes to indicate pump ready, pump running and fault and capable to communicate with other controllers following MODBUS-RTU or BACNET Class-2 protocall through RS485 port. System should be capable to compensate for frictional losses at lower flows. All alarms should be displayed in the controller. System should be equiped with dry running protection

-

-

-

... More
Quantity : 1 No.

-

-

-

... More
c. Complete (Skid mounted wall mounted / floor mounted) electrical control panel comprising of all accessories such as PLCs, pressure switches, pressure transducers, control wiring and any other necessary imports etc. (list to be provided by the vendor)

-

-

-

... More
d. Precharged diaphram pressure vessel with food grade membrane, charging connection, connected to outlet header with necessary flanges, gaskets, isolating valves, nuts/bolts etc complete.

-

-

-

... More
e. Set of accessories such as pressure switches, pressure transducers, inter connecting power and control cabling etc. complete.

-

-

-

... More
f. Accessories like pressure gauge, MS base frame (Synthetic enamel painted over a coat of primer)

-

-

-

... More
g. GI suction and delivery header with flanges for inlet connection, common outlet header with flanges for outlet connections as required, and interconnecting piping with flexible connections, eccentric type reducers etc. all necessary indigenous accessories as required to complete the installation. Sluice valves at inlet and butterfly valves at outlet, strainer at inlet and NRV at outlet of all pumps shall be provided.

-

-

-

... More
Note:Contractor to note that the suction header is required to have inlet connection from the Puddle Flange @ water tanks and to the pump suction. Provision of delivery header is required to have outlet connection from the pumps. Suitable outlet flanges from the delivery mainfold / header shall be provided as required.

-

-

-

... More
Domestic Booster system for Hospital at terrace as follows:

1

-

-

... More
No. of pumps (2 Working + 1 Standby)

-

-

-

... More
Water Flow Rate - 300 LPM Each

-

-

-

... More
Head - 30 M

-

-

-

... More
TOTAL FOR SUB HEAD - 03 CARRIED TO SUMMARY OF PRICES

-

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
SUBHEAD-04 WATER SUPPLY, DRAINAGE PUMPS & WATER TREATMENT EQUIPMENTS.

-

-

-

... More
Providing, installing, testing and commissining of variable speed (VSPS) hydropneumatic system mounted on a common base plate comprising of vertical centrifugal pumping set with S.S body, stainless steel impeller and mechanical seal, shaft directly coupled to a TEFC induction motor suitable for 400/440 volts, 3 phase, 50 cycles AC supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundation, one No. microprocessor based controller, dedicated variable frequency drive for each pump, one No.remote sensors, pressure transducers, sequence running cotroller, dry running Protection,motor control centre, necessary power and control cabling from MCC to pumps including required rating of MCB, one No. 90 litre capacity M.S diaphragam tank with interchangeable butyl rubber membrane,complete in all respects including stainless steel grade 316 pipe suction and delivery headers and isolation/ control valves( ball valves/butterfly valves/ Nan return valves/ vibration eliminators etc as required) , power box, equipped with fuses/ isolators/circuit breakers as required.

-

-

-

... More
Hyd. System for Domestic Water Supply Pump

-

-

-

... More
Flow rate : 150.0 LPM each

-

-

-

... More
Pumping Head - 60/65 m

-

-

-

... More
1 Set = 2 Nos. pump (1 working+1 standby)

-

-

-

... More
Approx H.P. - 5 HP or as per manufacturer recommendation.

1

-

-

... More
Location - UGH Pump Room

-

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
Hyd. System for Flushing Water Supply Pump

-

-

-

... More
Flow rate : 75.0 LPM each

-

-

-

... More
Pumping Head - 65/70 m

-

-

-

... More
1 Set = 2 Nos. pump (1 working+1 standby)

1

-

-

... More
Approx H.P. - 3 HP or as per manufacturer recommendation.

-

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
Supplying, installing, testing and commissioning of SS vertical centrifugal pump. Each pump shall have TEFC 2900 RPM three phase electric motor. The pump shall have cast iron head, base plate SS Shaft / Impeller / Intermediate chamber along with motor, pressure gauge with isolation cock, Isolation valve, NRV on delivery line. Isolation valve, stainer (with by-pass) at suction. Pump shall be provided with mechanical seal, suitable vibration elimination pads of approved design, drain pipe with valve (25 dia). The pump shall be suitable for auto/ manual operation. The installation shall be complete with all necessary ancillaries, starter panel / control panel & accessories including base plate complete as required.

-

-

-

... More
The entire Hydropneumatic system shall be factory fitted.

-

-

-

... More
Filter feed pump

-

-

-

... More
Flow rate : 150.0 LPM each

-

-

-

... More
Pumping Head - 35 m

-

-

-

... More
1 Set = 2 Nos. pump (1 working+1 standby)

-

-

-

... More
Approx H.P. - 2.5 HP or as per manufacturer recommendation.

1

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
Irrigation Pump

-

-

-

... More
Flow rate : 100.0 LPM each

-

-

-

... More
Pumping Head - 35 m

-

-

-

... More
1 Set = 2 Nos. pump (1 working+1 standby)

-

-

-

... More
Approx H.P. - 1.5 HP or as per manufacturer recommendation.

1

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
Supply, installing, testing and commissioning of submersible open impeller non-clog pumps with C.I.body and to TEFC submersible motor for 415 + 10% volts, 3 phase, 50 cycles A.C. power supply with mechanical seal, pump connector unit with rubber diaphragm and bend, vertical discharge pipe, guide pipe and chain in built level controller, sequence running controller, arrangement for both pumps together inacase of emenegency, audible hooter for failure or flooding, dry running Protection complete in all respects., painting, testing and commissioning complete with approved quality and make as required as per instruction of site incharge.

-

-

-

... More
(Pumps shall be installed in a set of two pumps One working and One standby)

-

-

-

... More
Basement & Pump Room Drainage Pumps

-

-

-

... More
(Pumps to be suitable to handle solids upto 12 mm size)

-

-

-

... More
Capacity - 5.0 LPS (Each)

-

-

-

... More
Head - 20 M

-

-

-

... More
H.P. - 2.0 HP Approx.

1

-

-

... More
Sewage Sump Pumps

-

-

-

... More
(Pumps to be suitable to handle solids upto 40 mm size)

-

-

-

... More
Capacity - 5.0 LPS (Each)

-

-

-

... More
Head - 20 M

-

-

-

... More
H.P. - 3.0 HP Approx.

1

-

-

... More
Providing, fixing, testing & commissioning of vertical MSEP filter with adequate dirt holding capacity. Fabricated from FRP sheet as per IS-2825 and manufacturer's specifications complete with intitial charge filter media including painting inside with two coats of non toxic epoxy and with one coat of zinc chromate two coats of synthetic enamel paint outside. Including concrete foudation with cement plaster complete as required. The filter shall also be provided with set of internals for raw water inlet and bottom collecting system. Complete with frontal piping (heavy) . it is designed on 1.50 m / sec velocity.

-

-

-

... More
Dual Media Filter For Domestic Water Supply

-

-

-

... More
Capacity- 9000 LPH

-

-

-

... More
Filtration rate- 6000 LPH/Sqm.

-

-

-

... More
Filter dia approx. - 1000 MM

-

-

-

... More
Working pressure: 3.0 Kg/sq cm.

-

-

-

... More
Test pressure : 4. 5 Kg/sq cm

1

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
Activated Carbon Filter For Domestic Water Supply

-

-

-

... More
Capacity- 9000 LPH

-

-

-

... More
Filtration rate- 6000 LPH/Sqm.

-

-

-

... More
Filter dia approx. - 1000 MM

-

-

-

... More
Working pressure: 3.0 Kg/sq cm.

-

-

-

... More
Test pressure : 4. 5 Kg/sq cm

1

-

-

... More
Supply Installation,Testing & Commissioning of metering pump type chemical doser with 100 lits. HDPE chemical grade solution tank,injection fitting assembly,suction and delivery hose upto the point of injection, capacity 0-6 lph, complete in all respects.

-

-

-

... More
Chlorination of Domestic Water

1

-

-

... More
Design, manufacture, supplying, fixing in position, testing and commissioning of the following front operated cubicle type, front access 2mm thick mild steel sheet, free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hz system and suitable for a fault level of 25 MVA symmetrical at 415 volts.

-

-

-

... More
All switchboards shall have provision for entry of cables from the top or bottom as required.

-

-

-

... More
All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The busbars insulation shall be with heat shrinkable sleeves. SMC/DMC shrouds and busbar supports shall be used. Padlocking facility shall be provided on all outgoing feeders doors and switch handles shall be lockable in OFF position.

-

-

-

... More
Electric Panel For Water Supply Pumps at Water Supply Pump Room

-

-

-

... More
INCOMING

-

-

-

... More
1 No. 63 amps TPN MCCB with the following accessories:

-

-

-

... More
1 No. square flush mounting 0-500 volts scaled voltmeter with three way and OFF switch.

-

-

-

... More
Three phase indicating lights.

-

-

-

... More
Electrolytic high conductivity three phase and neutral tinned copper bus bar rated at 100 amps having a current density of 1 amp per Sqmm suitable to with stand symmetrical fault level of 25 MVA at 415 volts. The neutral bus bar is to be of 100% capacity.

-

-

-

... More
OUTGOING UNITS

-

-

-

... More
Ten 25/40 Amp. TP + NL M.C.C.B. with rotary handle of breaking capacity 25KA

-

-

-

... More
Two 63 Amp. TP + NL M.C.C.B. with rotary handle of breaking capacity 25KA

-

-

-

... More
8 Nos. fully automatic DOL starters with push buttons and ON/OFF indicating lights and overload relays for 1.5 to 7.5 HP pump .

-

-

-

... More
8 Nos. rotary selector switch for selecting mode of operation i.e. auto/manual/off.

-

-

-

... More
6 Nos.cyclic relay for automatic duty changeover of pumps.

-

-

-

... More
8 No. single phase preventors.

-

-

-

... More
8 Nos. square flush mounting 0-30 amps scaled ammeters with three way and OFF selector switch.

-

-

-

... More
Space for 3 Nos. Level Controllers.

-

-

-

... More
Switchgear shall be suitable for the HPS of various motors.

-

-

-

... More
1 Nos. 63 Amp. TPN MCB Spare.

-

-

-

... More
2 Nos. 32/40 Amp. TPN MCB Spare.

-

-

-

... More
The motor control panel shall be prewired with colour coded wires with identification labels complete in all respects as required.

1

-

-

... More
Supplying, installing, testing and commissioning controllers with low voltage relays, stainless steel probes and PVC shroud wiring from tank top to probes of required.

-

-

-

... More
Level Controller For Water Supply Pump:

-

-

-

... More
To start pump when water level is low in Domestic Water U.G. tank and shut off pump when Domestic Water U.G. tank is full. Also to stop when water level is low in raw water underground tank.

2

-

-

... More
Level Controller For Sump Pumps:

-

-

-

... More
To start pump when water level is high in sump and shut off pump when sump is empty. Both pumps are start when sump is over flowing.

2

-

-

... More
Providing and fixing GI pipes complete (IS:1239 Heavy Class) with GI fittings and clamps including MS pipe supports, enamel paint as per specifications cutting and making good the walls etc. complete.

-

-

-

... More
50 mm dia

25

-

-

... More
65 mm dia

35

-

-

... More
80 mm dia

20

-

-

... More
100 mm dia

10

-

-

... More
150 mm dia

10

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
Butterfly valve (manual) with C.I body SS disc nitrile sheet & O ring & PN 16 Pressure rating as specified .

-

-

-

... More
50 mm dia

10

-

-

... More
65 mm dia

10

-

-

... More
80 mm dia.

15

-

-

... More
100 mm dia.

4

-

-

... More
150 mm dia

2

-

-

... More
Non - return valve with dual plate of CI Body SS plates vulcanized NBR seal flanged end & PN 16 rating as specified.

-

-

-

... More
50 mm dia

2

-

-

... More
65mm dia.

4

-

-

... More
80 mm dia.

4

-

-

... More
Providing and fixing resilient rubber neoprene lined style arch vibration eliminators suitable for raw water upto 45 deg.C. Temperature working pressure upto 16 Kg/Sqcm.

-

-

-

... More
50 mm dia

2

-

-

... More
65 mm dia

4

-

-

... More
80 mm dia

4

-

-

... More
Providing and fixing heavy duty armoured cables 1.1 KVA grade including necessary support clamps at ceiling level and connection lugs complete in all respects.

-

-

-

... More
Power cable Copper 3 core 10 sq.mm

20

-

-

... More
Power cable Copper 3 core 6 sq.mm

20

-

-

... More
Power cable Copper 3 core 4 sq.mm

20

-

-

... More
Control cable copper 2 core 1.5 sq.mm

20

-

-

... More
TOTAL OF SUB HEAD-08 : WATER SUPPLY, DRAINAGE PUMPS & WATER TREATMENT EQUIPMENTS

-

-

-

... More
GRP (SMC) Panel tank

-

-

-

... More
Supply & installation of GRP (SMC) Panel tank confirming to IS 14399 (PART 1 & 2) : 1996 & IS 4249 : 1967

-

-

-

... More
6LX5BX2H - 60KL

1

-

-

... More
5LX5BX2H - 50KL

2

-

-

... More
5LX3BX2H - 30KL

2

-

-

... More
EXTERNAL PLUMBING

-

-

-

... More
Butterfly valve (manual) with C.I body SS disc nitrile sheet & O ring & PN 16 Pressure rating as specified 100 mm nominal bore

-

-

-

... More
50 mm dia.

15

-

-

... More
65 mm dia.

12

-

-

... More
80 mm dia.

2

-

-

... More
100 mm dia.

1

-

-

... More
Providing, laying, Jointing, Testing and commissioning of uPVC pressure pipes of 10Kg/Sqcm pressure rating class 5 (IS : 4985-2000) including fittings, tees, bends, clamps, coupling and adaptors supports, and jointing with solvent joint, testing and necessary earth work in excavation, backfilling, disposal of surplus earth with a lead upto 50m complete, compaction and consolidation Including laying cement concrete 1:2:4 alround UPVC pipe including bed concrete and thrust blocks at bends as per standard design.

-

-

-

... More
25 OD mm.

220

-

-

... More
32 OD mm.

180

-

-

... More
40 OD mm

160

-

-

... More
50 OD mm

150

-

-

... More
63 OD mm

290

-

-

... More
Providing & Fixing of Garden hydrant outlet consisting 1 No. 25mm dia. Ball valve,( Brass) for connecting rubber hose, pipes & fittings.

10

-

-

... More
Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends)

-

-

-

... More
20mm nominal bore

1

-

-

... More
25 mm dia, nominal bore

1

-

-

... More
32 mm dia, nominal bore

2

-

-

... More
40 mm dia, nominal bore

5

-

-

... More
50mm nominal bore

8

-

-

... More
65mm nominal bore

10

-

-

... More
Constructing masonry Chamber 60x45x50 cm,inside with 75 class designation brick work in cement mortar 1:5 (1 cement:5 fine sand) for water meter complete with C.I. Doble flap surface box 400x200x200mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 corase sand: 4 graded stonr aggregate 20mm nominal size) necessary excavation foundation concret 1:5:10 (1 cement:5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortor 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design.

-

-

-

... More
With F.P.S. bricks

4

-

-

... More
TOTAL FOR SUB HEAD - 01 CARRIED TO SUMMARY OF PRICES

-

-

-

... More
SUBHEAD-02: EXTERNAL SEWERAGE & DRAINAGE INSTALLATIONS UPTO MAIN ROAD FIRST MANHOLE

-

-

-

... More
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete:

-

-

-

... More
150 mm diameter

202

-

-

... More
200 mm diameter

565

-

-

... More
250 mm diameter

290

-

-

... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design:

-

-

-

... More
150 mm diameter S.W. pipe

40

-

-

... More
200 mm diameter S.W. pipe

25

-

-

... More
250 mm diameter S.W. pipe

250

-

-

... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design :

-

-

-

... More
150 mm diameter S.W. pipe / RCC pipe

40

-

-

... More
200 mm diameter S.W. pipe / RCC pipe

25

-

-

... More
250 mm diameter S.W. pipe / RCC pipe

250

-

-

... More
300 mm diameter S.W. pipe / RCC pipe

-

-

-

... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :

-

-

-

... More
180 x 150mm size P-type

-

-

-

... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

30

-

-

... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :

-

-

-

... More
150 mm dia. R.C.C. pipe

240

-

-

... More
250 mm dia. R.C.C. pipe

250

-

-

... More
300 mm dia. R.C.C. pipe

200

-

-

... More
450 mm dia. R.C.C. pipe

25

-

-

... More
500 mm dia. R.C.C. pipe

15

-

-

... More
600 mm dia. R.C.C. pipe

10

-

-

... More
700 mm dia. R.C.C. pipe

10

-

-

... More
800 mm dia. R.C.C. pipe

1

-

-

... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :

-

-

-

... More
Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610mm internal dimensiions total weight of cover and frame to be not less than 38 Kg. ( weight of cover 23 Kg. and weight of frame 15 Kg.), with FPS bricks with class designation 7.5

-

-

-

... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

30

-

-

... More
Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) :

-

-

-

... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

2

-

-

... More
Extra for depth for manholes:

-

-

-

... More
Size 90 x 80 cm

-

-

-

... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

2

-

-

... More
Size 120x90 cm

-

-

-

... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

1

-

-

... More
Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :

-

-

-

... More
0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately):

-

-

-

... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

35

-

-

... More
Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91 m to 1.67 m

-

-

-

... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

15

-

-

... More
Constructing brick masonry circular manhole 1.22m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :

-

-

-

... More
1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) :

-

-

-

... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

2

-

-

... More
Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68 m to 2.29 m :

-

-

-

... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

1

-

-

... More
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.

60

-

-

... More
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality

-

-

-

... More
HD - 20

-

-

-

... More
Circular shape 560 mm internal diameter

1

-

-

... More
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :

-

-

-

... More
For pipes 100 to 250 mm diameter

1

-

-

... More
For pipes 350 to 450 mm diameter

1

-

-

... More
Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450mm precast RCC horizontal grating with frame complete as per standard design.

-

-

-

... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

50

-

-

... More
Providing and fixing F.R.P. Grating drain cover M.S. Angle ( 35 x35 x 5 mm). ( Load Bearing cap. 5 T, suitable for car parking, basement, Pump room, Parking Area ).

-

-

-

... More
377mm wide and 30mm thick

60

-

-

... More
TOTAL FOR SUB HEAD - 02 CARRIED TO SUMMARY OF PRICES

-

-

-

... More
SUBHEAD-05 Sewage Treatment Plant 105 KLD ( MBBR Technology OPD BLOCK )

-

-

-

... More
Note : All Civil Works with Structural Walk Ways/ Railings, General Lighting and Ventilation to be Done by contractor.

-

-

-

... More
Design, Supplying, installing, testing & commissioning of Sewage Treatment Plant of 105 KLD (excluding excavation, back filling & disposal of surplus earth MS / Civil construction work) for the following duty:

1

-

-

... More
Sewage treatment plant shall include the following items:

-

-

-

... More
a. Screen chambers with SS Screen b. Equalization Tank c. Aerobic & Anoxic tank d. MBBR TANK e. Air Blowers f. MBBR Media g. Recirculation pumps, backpulse pump, permeate pump etc. h. Dewatering system j. Electrical Panel, Cabling (Power & Control), Earthing k. Tertiary Treatment l. Clear Water tank and Flushing Water tank. m.UF System

-

-

-

... More
INLET SEWAGE CHARACTERSTICS (ASSUMED)

-

-

-

... More
pH - 6.0 – 8.5

-

-

-

... More
BOD5 : 250 - 350 mg/lit

-

-

-

... More
Total Suspended Solids (TSS) : 250 - 450 mg/lit

-

-

-

... More
COD : 500 - 700 mg/lit

-

-

-

... More
Oil / Grease : upto 50 mg/lit

-

-

-

... More
Inflow time : 24 HRS

-

-

-

... More
Peak factor : 3

-

-

-

... More
Temperature : Ambient

-

-

-

... More
Desired Sewage Quality After Treatment

-

-

-

... More
pH : 7 - 8

-

-

-

... More
BOD5 : 10 mg/lit

-

-

-

... More
Total Suspended Solids (TSS) : 10 mg/lit

-

-

-

... More
COD : 50 mg/lit

-

-

-

... More
Oil / Grease : 5 mg/lit

-

-

-

... More
Colour : Colourless

-

-

-

... More
Odor : unobjectionable

-

-

-

... More
E.coli : Nil

-

-

-

... More
NH4-N : 5 mg/lit

-

-

-

... More
N Total : 10 mg/lit

-

-

-

... More
PO4-P : 2 mg/lit

-

-

-

... More
Note:

-

-

-

... More
Vendor shall ensure submission of detailed GA drawings (Plan & Section), P&I diagram, schematic diagram for the above said component and additional component if so required for the complete working of the STP for the full capacity.

-

-

-

... More
TOTAL OF SUB HEAD-05 : SEWAGE TREATMENT PLANT

-

-

-

... More
SUBHEAD-06 Effluent Treatment Plant 20 KLD (OPD )

-

-

-

... More
Design, Supplying, installing, testing & commissioning of Effluent Treatment Plant of 20 KLD (excluding excavation, back filling & disposal of surplus earth and Civil construction work) for the following duty: (OPD BLOCK)

-

-

-

... More
Effluent from OT Scrubs, blood bank, labs etc. Some solvent/ chemical waste originating typically from hospital complex shall also be discharged into the ETP. Design to take consideration of same.

-

-

-

... More
INLET EFFLUENT CHARACTERSTICS

-

-

-

... More
PH : 5.5 - 9.0

-

-

-

... More
BOD : 250 - 600 mg/l

-

-

-

... More
S. Solids : 200 - 650 Mg/l

-

-

-

... More
COD : 600 - 1200 mg/l

-

-

-

... More
Oil & Grease : 50-140 mg/L

-

-

-

... More
Effluent discharge standard after treatment

-

-

-

... More
pH - 6.0 – 8.5

-

-

-

... More
BOD - Less than 150 Mg/L

-

-

-

... More
S. Solids - Less than or equal to 100 Mg/L

-

-

-

... More
COD - Less than or equal to 300 Mg/L

-

-

-

... More
Oil & Grease - Less than 5 Mg/L

-

-

-

... More
Effluent treatment plant shall include the following items:

-

-

-

... More
Screen Chamber

-

-

-

... More
Equalization tank/sump

-

-

-

... More
Primary Tube Settler

-

-

-

... More
Dosing System

-

-

-

... More
Sludge Holding Tank

-

-

-

... More
UV System

-

-

-

... More
Air Blowers, Pumps & equipment

-

-

-

... More
Piping, valves etc

-

-

-

... More
Clarified Water tank

-

-

-

... More
Electrical Panel & Cabling

1

-

-

... More
Note:

-

-

-

... More
Contractor shall ensure submission of detailed GA drawings (Plan & Section), P&I diagram, schematic diagram for the above said component and additional component if so required for the complete working of the ETP for the full capacity.

-

-

-

... More
FIRE FIGHTING WORK

-

-

-

... More
PUMPS

-

-

-

... More
1.NOC from fire authority shall be in the scope of Contractor . Only fee paid to the fire authority shall be reimbursed against the submission of the receipt and nothing shall be paid extra.

-

-

-

... More
2. All the Fire Fighting works shall be done in compliance of Fire Fighting authority requirement.

-

-

-

... More
Pump shall be capable of furnishing not less than 150% of rated capacity at a head not less than 65 % of rated head. The shut off head shall not exceed 120% of rated head.

-

-

-

... More
Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required :

-

-

-

... More
Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.

-

-

-

... More
Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.

-

-

-

... More
M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.

-

-

-

... More
Suitable cement concrete foundation duly plastered with anti vibration pads.

-

-

-

... More
2280 lpm at 88 m Head (For Hydrant & Sprinkler System).

2

-

-

... More
1620 lpm at 56 m Head (For Water Curtain System).

1

-

-

... More
Note: *The head of the pump is selected in a manner so as to give a minimum 3.5kgf/cm2 pressure at the highest/farthest point.

-

-

-

... More
Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump)

-

-

-

... More
Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.

-

-

-

... More
Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.

-

-

-

... More
M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required.

-

-

-

... More
Suitable cement concrete foundation duly plastered with anti vibration pads.

-

-

-

... More
2280 lpm at 88 m Head (For Hydrant & Sprinkler System).

1

-

-

... More
Note: *The head of the pump is selected in a manner so as to give a minimum 3.5kgf/cm2 pressure at the highest/farthest point.

-

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump).

-

-

-

... More
Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520.

-

-

-

... More
Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325.

-

-

-

... More
M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.

-

-

-

... More
Suitable cement concrete foundation duly plastered and with anti vibration pads.

-

-

-

... More
180 lpm at 88 m Head (For Hydrant & Sprinkler System).

2

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)

-

-

-

... More
Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520.

-

-

-

... More
Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325.

-

-

-

... More
M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.

-

-

-

... More
Suitable cement concrete foundation duly plastered and with anti vibration pads.

-

-

-

... More
900 lpm at 35 m Head

1

-

-

... More
TOTAL FOR SUB HEAD - 01 CARRIED TO SUMMARY OF PRICES

-

-

-

... More
CONTROL PANELS

-

-

-

... More
Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :

-

-

-

... More
Incomings

-

-

-

... More
400A, 50kA 4 Pole MCCB, Ics=100% Icu rating

-

-

-

... More
Digital Voltmeter 0-500V with selector switch

-

-

-

... More
Ammeter (0-400 A) with selector swtich & CTs etc.

-

-

-

... More
LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps

-

-

-

... More
Set of Copper Bus Bar 500A

-

-

-

... More
Outgoings

-

-

-

... More
( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps)

-

-

-

... More
Main Fire Pump

-

-

-

... More
200 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 75 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. 2 Set

-

-

-

... More
Jockey Pump

-

-

-

... More
100 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. 2 Set

1

-

-

... More
Diesel Engine Control

-

-

-

... More
Control for diesel engine comprising - Automatic/Manual selctor switch & 3 attempt starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0- 20 A DC Ammeter

-

-

-

... More
All standard relays and accessories for automatic operation of diesel engine

-

-

-

... More
System Controller

-

-

-

... More
Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specifications.

-

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
Supplying,Installation,testing & commissioning of dust & vermin proof double door with canopy type taperd roof wall / floor mounted compartmentlised feeder piller type cubical control Panel for fire fighting terrace pump of front area not less than 1.0 Sqmtr. and depth not less than 300 mm, made out of 2mm thick CRCA sheet with 100 Amp. 4 strip aluminium bus bars with front openable door & locking arrangement, interconnection, control wiring, intrigation with pressure switch i/c suppying & fixing following switchgears & control gears/starters etc. as required.

-

-

-

... More
Incomming

-

-

-

... More
63 Amps. TP & N SFC with HRC fuses

-

-

-

... More
Voltmeter (0-500 Volt) with selector switch.

-

-

-

... More
Ammeter (0-60 Amps.) with selector switch & CTs.

-

-

-

... More
Set of 3 phase indication lamp

-

-

-

... More
Suitable HP fully automatic Star/Delta Starter with over load protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation.

-

-

-

... More
Selector switch for local/remote, auto/manual/off operation ON/OFF indication etc.

1

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. It should be complete as per specifications & directions of Engineer-in-charge.

-

-

-

... More
4 x 25 sqmm ( 28 mm )

6

-

-

... More
3.5 x 50 sqmm ( 35 mm )

6

-

-

... More
3 X 10 sq. mm (22mm)

4

-

-

... More
Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.

-

-

-

... More
150 mm width x 50mm depth x 1.6 mm thickness.

20

-

-

... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

4

-

-

... More
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

20

-

-

... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

40

-

-

... More
Supply of XLPE insulated PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts. (conforming to IS-7098. (Part-I).

-

-

-

... More
4 core, 25 sq.mm. Aluminium Armoured

100

-

-

... More
3.5 core, 50 sq.mm. Aluminium Armoured

100

-

-

... More
4 core, 10 sq.mm. Aluminium Armoured

10

-

-

... More
Supply and fixing in position 1 m wide Insulation mat made of elastomeric polymers Material (Class -A) of 415V grade as per IS 15642-2006 . Thickness of insulation mat shall be not less than 2 mm to withstand 1.1 KV dielectric strength AS PER IS 15652 : 2006. It should be complete as per specifications & directions of Engineer-in-charge.

5

-

-

... More
TOTAL FOR SUB HEAD - 02 CARRIED TO SUMMARY OF PRICES

-

-

-

... More
PIPES & ACCESSORIES

-

-

-

... More
Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. ( For Underground )

-

-

-

... More
200 mm. dia (wall thickness = 6.3 mm)

-

-

-

... More
150 mm. Dia

300

-

-

... More
100 mm. Dia

70

-

-

... More
80 mm. Dia

50

-

-

... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. (Plant Room piping/Vertical Riser/Downcomer/Floor)

-

-

-

... More
25 mm dia

37595

-

-

... More
32 mm dia

223

-

-

... More
40 mm dia

2285

-

-

... More
50 mm dia

2635

-

-

... More
65 mm dia

1030

-

-

... More
80 mm dia

745

-

-

... More
100 mm dia

490

-

-

... More
150 mm dia

1545

-

-

... More
200 mm dia (wall thickness 6.3 mm)

40

-

-

... More
250 mm dia (wall thickness 6.3 mm)

40

-

-

... More
300 mm dia (wall thickness 7.1 mm)

5

-

-

... More
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :

-

-

-

... More
Single headed Gunmetal

46

-

-

... More
Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required :

-

-

-

... More
Single headed Gunmetal

10

-

-

... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :

-

-

-

... More
50mm dia

1

-

-

... More
65mm dia

10

-

-

... More
80 mm dia

5

-

-

... More
100 mm dia

2

-

-

... More
150 mm dia

46

-

-

... More
200 mm dia

2

-

-

... More
250 mm dia

1

-

-

... More
300 mm dia

1

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.

10

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :

-

-

-

... More
65 mm dia

2

-

-

... More
80 mm dia

2

-

-

... More
100 mm dia

2

-

-

... More
150 mm dia

6

-

-

... More
200 mm dia

1

-

-

... More
250 mm dia

1

-

-

... More
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.

-

-

-

... More
80 mm dia

-

-

-

... More
100 mm dia

2

-

-

... More
150 mm dia

2

-

-

... More
200 mm dia

1

-

-

... More
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :

-

-

-

... More
Gun Metal

84

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.

-

-

-

... More
20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585

-

-

-

... More
20 mm nominal internal dia gun metal globe valve & nozzle.

-

-

-

... More
Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.

-

-

-

... More
40 m

42

-

-

... More
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :

-

-

-

... More
Gun metal

42

-

-

... More
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :

-

-

-

... More
2 way-100 mm dia M.S. Pipe. (FOR UG TANK)

1

-

-

... More
4 way - 150 mm dia M.S. Pipe. (FOR UG TANK & EXTERNAL RING MAIN)

2

-

-

... More
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.

4

-

-

... More
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :

-

-

-

... More
Pendent Sprinkler

3070

-

-

... More
Upright Sprinkler

3360

-

-

... More
Horizontal side wall sprinkler

132

-

-

... More
Concealed sprinkler

-

-

-

... More
Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.

6

-

-

... More
Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required.

-

-

-

... More
100mm dia

1

-

-

... More
150mm dia

40

-

-

... More
Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required :

-

-

-

... More
150mm dia

4

-

-

... More
Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required.

-

-

-

... More
700 mm

1070

-

-

... More
1000 mm

1500

-

-

... More
1200 mm

750

-

-

... More
1500 mm

750

-

-

... More
Supplying, installation, testing & commissioning of deluge valve (to be used for water curtains) UL listed with wet pilot basic trim assembly for DVA with test and alarm, drip and drain valve with water motor gong complete as required.

-

-

-

... More
80 mm dia

2

-

-

... More
Providing, installation, testing & commissioning of water curtain nozzle 15mm dia nickel chrome plated brass, BSPT, K-factor as per design consideration complete as required.

38

-

-

... More
Providing, installation, testing & commissioning of electric release trim assembly for deluge wall with two way solelnoid valve, weather proof operation on 24 volts DC supply complete as required.

42

-

-

... More
Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia in white finish UL Listed or FM approved complete as required.

3070

-

-

... More
Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required

50

-

-

... More
Providing and fixing standard fireman's axe with heavy insulated rubber handle conforming to IS: 926 complete.

42

-

-

... More
Providing & Fixing of MS door made up of 16 gauge MS Sheet capable of accommodating fire hose reel, landing valve, hose pipes, fittings, 1 No. CO2 & 1 No. Dry podwer type portable fire extinguishers & accessories. The door shall have a front glass with lock and key arrangement & shall be painted with one coat of primer & two coat of finished stove enamelled post office red colour paint & "FIRE HOSE" written on front. (Approx. size of door: 2100 mm HEIGHT, WIDTH OF DOOR AS PER SHAFT SIZE )

42

-

-

... More
Providing and fixing hose cabinet of size 750mmX600X250mm made of 16 gause thick MS sheet with 4 mm thick float glass doors in front painted "FIRE" in red paint i/c recessary locking arrangement suitable to accommodate external hydrant with butterfly valve 2 nos. 15 mtr. long hose pipe. 1 no. brach pipe mounted on wall or raised brick platform & duly painted with post office red externally and white internally with synthetic enamel paint complete in all respects for external hydrant. as directed by Engineer-in-Charge.

10

-

-

... More
Pressure Vessel Supplying, installing, testing and commissioning of pressure vessel for pressurization of fire system complete with valves at outlet / drain to operate as per operating sequences including 25 mm dia drain valve, air release valve with stop cock on the top, outside with one coat of primer & two coats of synthetic enamel paint of approved shade complete as required to operate commonly main fire pump, sprinkler pump & jockey pump at drop of pressure, automatically at required pressure setting. Complete as per manufacturer's specifications & as directed by Engineer- in-charge. working pressure:- 11 kg/sqcm test pressure: 20 kg/sqcm

-

-

-

... More
(450 mm dia & 2000 mm height)

3

-

-

... More
Providing, Fixing, testing and commissioning of resilient rubber lined single arch vibration eliminators suitable for raw water up to 45 deg. C temperature, working pressure 11 Kg/cm2 and test pressure 16 Kg/cm2 to provide relief from stresses at pipe flanges.

-

-

-

... More
150 mm dia

8

-

-

... More
80 mm dia

4

-

-

... More
Supply, fixing, testing and commissioning of screwed type brass/bronze lever operated ball valve of full flow with stainless steel ball (AISI 304 & spindle AISI 410) with setting & gland of superior quality having minimum working pressure of 16 kg/sqcm.

-

-

-

... More
25 mm Dia

150

-

-

... More
Providing and fixing 25 mm dia inspection & testing assembly with gun metal ball valve, gun metal sight glass ,Reducer ,union, G.I PIPE. connection to drain pipe/riser.

48

-

-

... More
Providing & fixing cast iron 100 mm dia. Foot valve with nuts, bolts, 1.5 mm thick CAF gasket complete with all accessories (To be provided into UG Fire Water Tanks).

2

-

-

... More
Supply and fixing of 4 Nos G.I round bottom FIRE BUCKET of 9 LTR. Capacity field with sand including proper supporting /mounting arrangement MS Angle Iron Frame painted by fire red colour over 2 coats of red oxide paint and written with white paint FIRE complete in all respects as per direction of Engineer Incharge .

8

-

-

... More
Providing, fixing water flow meter on test line complete with all accessories for flow indication , monitoring & testing of fire pumps with bypass arrangment including piping & bypass valves.

-

-

-

... More
150 mm dia

1

-

-

... More
TOTAL FOR SUB HEAD - 03 CARRIED TO SUMMARY OF PRICES

-

-

-

... More
FIRE EXTINGUSHER

-

-

-

... More
Providing, storing, handling, shifting, installation, testing and commissioning of halon free portable fire Extinguishers as described below:

-

-

-

... More
Concealed work, including cutting chases and making good the walls etc.

-

-

-

... More
Providing and Fixing of CO2 Portable 4.5 Kg Fire extinguisher, Carbon-Dioxide type Flat base Horn Including Valve, High Pressure Rubber Wire Braided Discharge Hose of not less than 10 mm dia. & complete in all respects including initial fill with CO2 Gas confirming to IS:15222. and IS 15683:2018 Marked. Location : Inside FHC, Parking Area, Electrical Room, Pump Room,

62

-

-

... More
Supply & Fixing of 6 Kg ABC MAP-50% Powder based Fire Extinguisher, Applicable Fire Class A, B & C, EPDM Rubber Hose, NRV Valve and Helium Leak Detection Tested, Internal Coating - Epoxy Powder and External Pure Polyester Powder Coated (UV resistant), IS 15683:2018 Marked. Location : Open General Area, Inside FHC, Parking Area, Basement

200

-

-

... More
Supply & Fixing of 9 Kg ABC MAP-50% Powder based Fire Extinguisher, Applicable Fire Class A, B & C, EPDM Rubber Hose, NRV Valve and Helium Leak Detection Tested, Internal Coating - Epoxy Powder and External Pure Polyester Powder Coated (UV resistant), IS 15683:2018 Marked. Location : Open General Area, Inside FHC, Parking Area, Basement

200

-

-

... More
Providing and Fixing of Portable 4kg Clean Agent HFC-236fa Fire Extinguisher, Gas UL Listed under EPA SNAP, EPDM Rubber Hose, NRV Valve and Helium Leak Detection Tested, Internal Coating - Epoxy Powder and External Pure Polyester Powder Coated (UV resistant), Suitable for Class A,B and C & Electrically Started Fires, Conforming to IS 15683:2018 Marked. Location : General Office Area, Inside of Critical Rooms i.e. Server Room, UPS Near Rooms, Fire Control Room etc.

22

-

-

... More
Providing, fixing of 60 Ltr Mechanical Foam (AFFF-6%, Confirms to IS 4989 (Part-II), Trolley Mounted Fire Extinguishers, Fitted with 4 Metre EPDM Hose with SS Spring of 300mm & Air Aspirated Nozzle, CO2 Gas Cartridge of 300 Grams. Confirms to IS 4947, Brass Forged Cap, including all accessories complete in all respect. Applicable on Class A & B Fire, IS 16018:2012 Marked & CE Approved. Location : Near HSD Tank, DG Area

1

-

-

... More
Providing and fixing Fire related signages printed on photoluminescent U1000 aluminium sheet of 1.0 mm (+-10%) containing Lumigen II as base chemical, covered under UV stablized coating and of appropriate size including fixing on wall, door, ceiling etc. with proper clamps, hangers, cleats, anchor fasteners etc.

4000

-

-

... More
ELECTRICAL

-

-

-

... More
INTERNAL EIECTRICAL WORK

-

-

-

... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

-

-

-

... More
Group C

7832

-

-

... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

176

-

-

... More
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

21600

-

-

... More
Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

6260

-

-

... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

-

-

-

... More
CIRCUIT / SUBMAIN WIRING

-

-

-

... More
2x1.5 sq mm + 1x1.5 sq mm earth wire

36105

-

-

... More
2x2.5 sq mm + 1x2.5 sq mm earth wire

8200

-

-

... More
2x6 sq mm + 1x6 sq mm earth wire.

1150

-

-

... More
2x10 sq mm + 1x6 sq mm earth wire.

1000

-

-

... More
2x16 sq mm + 1x6 sq mm earth wire.

1200

-

-

... More
4x2.5 sq mm + 2x2.5 sq mm earth wire

1090

-

-

... More
4x6 sq mm + 2x6 sq mm earth wire.

2500

-

-

... More
4x10 sq mm + 2x6 sq mm earth wire.

2200

-

-

... More
4x16 sq mm + 2x6 sq mm earth wire.

2400

-

-

... More
Wiring for light point/ fan point / exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular switch, modular plate, suitable GI box etc as required.

-

-

-

... More
Group C

500

-

-

... More
Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, 2 way modular switch, modular plate, suitable GI box etc as required.

10

-

-

... More
Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

1000

-

-

... More
Wiring for light/ power plug with 4X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit alongwith 2 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

400

-

-

... More
Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required

-

-

-

... More
CIRCUIT / SUBMAIN WIRING

-

-

-

... More
2x1.5 sq mm + 1x1.5 sq mm earth wire

1800

-

-

... More
2x2.5 sq mm + 1x2.5 sq mm earth wire

600

-

-

... More
2x6 sq mm + 1x6 sq mm earth wire.

50

-

-

... More
2x10 sq mm + 1x6 sq mm earth wire.

100

-

-

... More
2x16 sq mm + 1x6 sq mm earth wire.

80

-

-

... More
4x2.5 sq mm + 2x2.5 sq mm earth wire

350

-

-

... More
4x6 sq mm + 2x6 sq mm earth wire.

150

-

-

... More
4x10 sq mm + 2x6 sq mm earth wire.

125

-

-

... More
4x16 sq mm + 2x6 sq mm earth wire.

100

-

-

... More
Supplying and drawing Following pair 0.5 mm dia FR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

-

-

-

... More
2 Pair

10

-

-

... More
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

2200

-

-

... More
Supplying and fixing of following sizes of PVC conduit along with the accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

-

-

-

... More
20mm dia

2250

-

-

... More
25mm dia

32500

-

-

... More
32mm dia

200

-

-

... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

-

-

-

... More
5/6 amps one way switch

938

-

-

... More
15/16 amp one way switch

1428

-

-

... More
5/6 amp 3 pin socket outlet

938

-

-

... More
5/16 amp 6 pin socket outlet

1428

-

-

... More
Telephone Socket Outlet

2

-

-

... More
TV anteena Socket Outlet

55

-

-

... More
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

892

-

-

... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

450

-

-

... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.

-

-

-

... More
1 or 2 Module (78mm x 78mm x 45mm) - For Telephone & TV outlet.

57

-

-

... More
4/5 Module (78mm x140mm x 50mm)

2366

-

-

... More
6 Module (78mmX205mmx50mm)

257

-

-

... More
8/9 Module (78mmX230mmx60mm)

350

-

-

... More
12 Module (135mmX205mmx60mm)

150

-

-

... More
Supplying and fixing 2 pin 5 Amp Ceiling rose on the existing junction box/ wooden block including connection etc as required.

892

-

-

... More
Supplying and fixing brass batten/ angle holder including connection etc. as required.

100

-

-

... More
Supplying and fixing Ding dong sound call bell single phase, 230 volts, complete as required.

100

-

-

... More
Installation, testing and commissioning of pre wired fluorescent fitting / Compact fluorescent fitting off all type complete with all accessories and tube etc directly / wall including connection with 1.5 sq.mm FR PVC insulatted. copper conductor single core cable and earthing etc. as required.

20

-

-

... More
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable, etc. as required.

2

-

-

... More
Installation of exhaust fan up 450 mm sweep in the existing opening including making the hole to suit the size of above the fan, making good the damage, connection, testing, commissioning etc. as required.

50

-

-

... More
Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

20

-

-

... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). (For UPS Supply)

608

-

-

... More
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.

-

-

-

... More
20mm dia

7200

-

-

... More
25mm dia

450

-

-

... More
Supply & drawing following sizes of FR PVC insulated copper conductor single core cables in existing surface/recessed steel / PVC conduit including dismantling as required.

-

-

-

... More
2 x 1.5 sq.mm

200

-

-

... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

-

-

-

... More
8 Way Double Door

4

-

-

... More
12 Way Double Door

4

-

-

... More
Supplying and fixing following ways, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

-

-

-

... More
6 Way (4+18), Double Door Horizontal Type

32

-

-

... More
8 Way (4+24), Double Door Horizontal Type

2

-

-

... More
Supplying and fixing following ways surface / recess mounting Vertical type 415 Volts TPN MCB distribution board, of sheet steel dust protected duly power painted inclusive of 200 Amps tinned copper bus bar common, neutral link, earth bar, din bar, for mounting MCB's (But without MCB's and incomer) as required. ( Note:- Vertical Type MCB TP DB is normally used where 3phase outlets are required.

-

-

-

... More
8 Way (4+18), Double Door Vertical Type

55

-

-

... More
12 Way (4+24), Double Door Vertical Type

51

-

-

... More
Supplying and fixing 6 Amp to 32 Amp rating 240 volts, 10 KA "C" Curve Miniature Circuit Breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc.,as required.

-

-

-

... More
6 / 32 Amp Single Pole

2988

-

-

... More
40 Amp DP

4

-

-

... More
50/63 Amp DP

4

-

-

... More
6/32 Amp TPN

60

-

-

... More
40 Amp TPN

20

-

-

... More
50/63 Amp TPN

56

-

-

... More
Supplying and fixing Single pole blanking plate in the existing MCB DB complete etc. as required.

60

-

-

... More
Supplying and fixing of following rating double pole ( Single pole & neutral), 240 volts, resudual current circuit breaker (RCCB), having a sensivity current 30 miliampere in the existing MCB DB complete with connections, testing & commissioning etc as required.

-

-

-

... More
16/25 Amps

180

-

-

... More
40 Amps

65

-

-

... More
63 Amps

172

-

-

... More
Providing and fixing M.V. danger Notice plate of 200mm x 150 mm of made of mild steel, at least 2 mm thick and vitreous enamelded white on both side and with inscription in single red colour in front side as requird

27

-

-

... More
Providing and fixing H.T. danger Notice plate of 250mm x 200 mm of made of mild steel, at least 2 mm thick and vitreous enamelded white on both side and with inscription in single red colour in front side as requird

3

-

-

... More
Supplying and fixing Cable End Box (Loose wire box) (IP 43) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with testing and commissioning etc. as required.

-

-

-

... More
For 10 way, Double door SPN MCBDB

4

-

-

... More
For 14 way, Double door SPN MCBDB

4

-

-

... More
Supplying and fixing Cable End Box (Loose wire box) (IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415V, on surface/ recess, complete with testing and commissioning etc. as required.

-

-

-

... More
For 6 way, Double door TPN MCBDB

32

-

-

... More
For 8way, Double door TPN MCBDB

108

-

-

... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) as required.

111

-

-

... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) as required.

18

-

-

... More
Providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required.

250

-

-

... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required

6400

-

-

... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

1200

-

-

... More
Providing and fixing earth bus of 50 mm x 5 mm copper strip on surface for connections etc. as required.

210

-

-

... More
Providing and fixing 50 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required

380

-

-

... More
Providing and fixing of lighting conductor finial made of 25 mm dia 300 mm long, GI tube having single prong at top with 85 mm dia 6mm thick G.I Base plate including hole etc. as required

5

-

-

... More
Providing and fixing GI Tape 20mmx 3mm thick on parapet or surface of wall for lighting conductor complete as required. ( for Horizental Run)

1071

-

-

... More
Providing and fixing GI Tape 20mmx 3mm thick on parapet or surface of wall for lighting conductor complete as required. ( for Vertical Run)

1215

-

-

... More
Providing and fixing testing Jointing made of 20mmx 3mm thick G.I Strip 125 mm Long. With 4 nos of G.I bolts. Nuts chuck nuts and spring washers etc. as required

27

-

-

... More
Providing and Laying G.I tape 32mm x 6mm from earth electrode directoly in ground as required.

405

-

-

... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

-

-

-

... More
120 mm dia (OD-120 mm & ID-103 mm nominal)

200

-

-

... More
200 mm dia (OD-200 mm & ID-175 mm nominal)

300

-

-

... More
INSPECTION CHAMBER:

-

-

-

... More
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :

-

-

-

... More
Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets.

-

-

-

... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

30

-

-

... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.

-

-

-

... More
1 run of cable

28270

-

-

... More
2 run of cable

6500

-

-

... More
3 run of cable

2667

-

-

... More
Supply of XLPE insulated PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts. (conforming to IS-7098. (Part-I).

-

-

-

... More
3.5 core, 300 sq.mm.

8300

-

-

... More
3.5 core, 240 sq.mm.

450

-

-

... More
3.5 core, 185 sq.mm.

350

-

-

... More
3.5 core, 150 sq.mm.

475

-

-

... More
3.5 core, 120 sq.mm.

250

-

-

... More
3.5 core, 95 sq.mm.

875

-

-

... More
3.5 core, 70 sq.mm.

265

-

-

... More
3.5 core, 50 sq.mm.

500

-

-

... More
3.5 core, 35 sq.mm.

380

-

-

... More
4 core, 16 sq.mm.

9500

-

-

... More
4 core, 10 sq.mm.

6500

-

-

... More
4 core, 6 sq.mm.

2750

-

-

... More
2 core, 10 sq.mm.

1000

-

-

... More
2 core, 6 sq.mm.

1050

-

-

... More
Supply & Laying of following sizes of 1.1KV grade multistranded copper conductor PVC insulated cable including termination complete as required in existing cable tray.

-

-

-

... More
1C x 35 sq.mm PVC Insulated cu wire including termination etc.

320

-

-

... More
1C x 16 sq.mm PVC Insulated cu wire including termination etc.

450

-

-

... More
11 KV H.T. CABLE:

-

-

-

... More
Supplying of 11 KV grade aluminium conductor, cross linked polyethylene (XLPE) insulated individual core screened, flat steel/strip armoured PVC sheathed cable complete as required.

-

-

-

... More
3C x 300 Sqmm, 11 KV XLPE

150

-

-

... More
Supply & Laying of following sizes of 1.1KV grade Copper conductor XLPE insulated and FRLS PVC sheathed armoured control cable including termination conforming to relevant IS.

-

-

-

... More
4 core, 2.5 sq.mm.

100

-

-

... More
10 core, 2.5 sq.mm.

200

-

-

... More
12 core, 2.5 sq.mm.

200

-

-

... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

-

-

-

... More
Upto 35 sq. mm

200

-

-

... More
Above 35 sq. mm and upto 95 sq. mm

100

-

-

... More
Above 95 sq. mm and upto 185 sq. mm

100

-

-

... More
Above 185 sq. mm and upto 400 sq. mm

3260

-

-

... More
Laying of one number additional PILCA / PVC insulated and PVC sheathed / XLPE power cable of grade exceeding 1.1 KV but not exceeding 11 KV of size exceeding 120 sqmm but not exceeding 400 sq.mm direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning protective covering and refilling the trench etc. as required.

150

-

-

... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.

-

-

-

... More
Upto 35 sq. mm

200

-

-

... More
Above 35 sq. mm and upto 95 sq. mm

100

-

-

... More
Above 95 sq. mm and upto 185 sq. mm

100

-

-

... More
Above 185 sq. mm and upto 400 sq. mm

3260

-

-

... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.

-

-

-

... More
Upto 35 sq. mm (clamped with cable tie)

12500

-

-

... More
Above 35 sq. mm and upto 95 sq. mm (clamped with cable tie)

935

-

-

... More
Above 95 sq. mm and upto 185 sq. mm (clamped with cable tie)

425

-

-

... More
Above 185 sq. mm and upto 400 sq. mm (clamped with cable tie)

3140

-

-

... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

-

-

-

... More
2 x 6 sq. mm (19mm)

20

-

-

... More
2 X 16 sq. mm (22mm)

10

-

-

... More
3½ X 35 sq. mm (32mm)

12

-

-

... More
3½ X 50 sq. mm (35mm)

2

-

-

... More
3½ X 70 sq. mm (38mm)

10

-

-

... More
3½ X 95 sq. mm (45mm)

64

-

-

... More
3½ X 120 sq. mm (50mm)

2

-

-

... More
3½ X 150 sq. mm (50mm)

12

-

-

... More
3½ X 185 sq. mm (57mm)

2

-

-

... More
3½ X 240 sq. mm (62mm)

6

-

-

... More
3½ X 300 sq. mm (70mm)

168

-

-

... More
4 X 10 sq. mm (25mm) including 4x6 sq.mm

202

-

-

... More
4 X 16 sq. mm (28mm)

326

-

-

... More
11 KV END TERMINATION:

-

-

-

... More
supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :

-

-

-

... More
3C x 300 Sqmm, 11KV XLPE

3

-

-

... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

-

-

-

... More
100 mm wide x 50 mm depth x 1.6 mm thickness.

900

-

-

... More
150 mm wide x 50 mm depth x 1.6 mm thickness.

700

-

-

... More
300 mm wide x 50 mm depth x 1.6 mm thickness.

500

-

-

... More
450 mm wide x 50 mm depth x 2.0 mm thickness.

325

-

-

... More
600 mm width X 50 mm depth X 2.0 mm thickness

400

-

-

... More
750 mm width X 62.5 mm depth X 2.0 mm thickness

250

-

-

... More
900 mm width X 62.5 mm depth X 2.0 mm thickness

350

-

-

... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

-

-

-

... More
100 mm wide x 50 mm depth x 1.6 mm thickness.

30

-

-

... More
150 mm wide x 50 mm depth x 1.6 mm thickness.

24

-

-

... More
300 mm wide x 50 mm depth x 1.6 mm thickness.

18

-

-

... More
450 mm wide x 50 mm depth x 2.0 mm thickness.

12

-

-

... More
600 mm width X 50 mm depth X 2.0 mm thickness

9

-

-

... More
750 mm width X 62.5 mm depth X 2.0 mm thickness

12

-

-

... More
900 mm width X 62.5 mm depth X 2.0 mm thickness

10

-

-

... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

-

-

-

... More
100 mm wide x 50 mm depth x 1.6 mm thickness.

4

-

-

... More
150 mm wide x 50 mm depth x 1.6 mm thickness.

10

-

-

... More
300 mm wide x 50 mm depth x 1.6 mm thickness.

15

-

-

... More
450 mm wide x 50 mm depth x 2.0 mm thickness.

12

-

-

... More
600 mm width X 50 mm depth X 2.0 mm thickness

18

-

-

... More
750 mm width X 62.5 mm depth X 2.0 mm thickness

15

-

-

... More
900 mm width X 62.5 mm depth X 2.0 mm thickness

8

-

-

... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Cross member"(galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.

-

-

-

... More
100 mm width X 50 mm depth X 1.6 mm thickness

10

-

-

... More
150 mm width X 50 mm depth X 1.6 mm thickness

12

-

-

... More
300 mm width X 50 mm depth X 1.6 mm thickness

14

-

-

... More
450 mm width X 50 mm depth X 2.0 mm thickness

15

-

-

... More
600 mm width X 50 mm depth X 2.0 mm thickness

20

-

-

... More
750 mm width X 62.5 mm depth X 2 mm thickness

25

-

-

... More
900 mm width X 62.5 mm depth X 2.0 mm thickness

15

-

-

... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “Reducer” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

-

-

-

... More
100 mm wide x 50 mm depth x 1.6 mm thickness.

1

-

-

... More
150 mm wide x 50 mm depth x 1.6 mm thickness.

10

-

-

... More
300 mm wide x 50 mm depth x 1.6 mm thickness.

12

-

-

... More
450 mm wide x 50 mm depth x 2.0 mm thickness.

15

-

-

... More
600 mm width X 50 mm depth X 2.0 mm thickness

18

-

-

... More
750 mm width X 62.5 mm depth X 2 mm thickness

20

-

-

... More
900 mm width X 62.5 mm depth X 2.0 mm thickness

10

-

-

... More
Supplying, installing by suspension on ceiling, testing and commissioning of following capacity Sandwich Type Rising Mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply with metal clad enclosure having IP-54 rating after fixing the tap off boxes and all accessories, made of 1.6mm thick steel sheet duly powder coated in convenient sections complete with 4 Nos aluminium bus bars having current density of 130 A/ sq cm atnominal current rating, necessary joints, elbow joints & expansion joints and bends, fire barrier at each floor, provision of tapping at every metre, adopter box and copper flexible for joints, continuous earthing with 2 Nos aluminium strip of suitable size (one on each side) including, G.I. clamping brackets, suspenders, angle iron bracket, steel fasteners, connecting to earthing system etc. as required.

-

-

-

... More
400 A 25kA SC for 1 sec

50

-

-

... More
630 A 50kA SC for 1 sec

48

-

-

... More
1000 A 50kA SC for 1 sec

60

-

-

... More
2500 A 50kA SC for 1 sec

30

-

-

... More
Supplying, installation, testing & commisioning of following capacity Plug In/ tap off box on the existing Air Insulated Compact Type bus trunking/ rising mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply made with 1.6mm thick sheet steel enclosure (IP54) duly powder coated with provision of MCCB/ACB (but without MCCB/ACB) complete etc. as required

-

-

-

... More
200 A 25kA SC for 1 sec (Including 160A)

27

-

-

... More
400 A 35kA SC for 1 sec (Including 315A)

2

-

-

... More
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes cubicle panel, making connections, etc. as required.

-

-

-

... More
200 A,36KA,FPMCCB

27

-

-

... More
400 A,35KA,FPMCCB

2

-

-

... More
Supplying, installation, testing & commisioning of following capacity End Feed Unit for the existing Air Insulated Compact Type bus trunking/ rising mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply made with 1.6mm thick steel sheet enclosure (IP54) duly powder coated with rovision of MCCB/ACB (but without MCCB/ACB) complete with necessary joints including clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system etc. as required

-

-

-

... More
1000 A 50kA SC for 1 sec

3

-

-

... More
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes cubicle panel, making connections, etc. as required.

-

-

-

... More
630 A,50KA,FPMCCB

1

-

-

... More
Supply, Installation, Testing & Commissioning of following End Feed Unit housing fabricated out of 14G CRCA powder coated (as approved) sheet steel for the Rising Mains fitted with following ACB. The End Feed Unit should complete with solid aluminium links of rated capacity of ACB to Rising Mains. The End Feed Unit should be complete with suitable size of glands plate for incoming cables. All MCCB / ACB shall have Ics value of 50 KA. Each end feed unit shall have a set of 3 nos. phase LED Type indicating lights with control fuses.

-

-

-

... More
1000A TPN MDO ACB, 50 KA

3

-

-

... More
Supply, erection, testing and commissioning of following sizes of TV splitter of aluminium die cast body in suitable size of G.I. Box.

-

-

-

... More
4 way

18

-

-

... More
Supply, erection, testing and commissioning of following co-axial cable in existing conduit.

-

-

-

... More
RG-11

100

-

-

... More
Supply & installation of 32 Amp 3 phase, 415 volt, 50 Hz water tight (IP-55) socket outlet with interlocking switch complete with all fixing accessories.

10

-

-

... More
Supply & installation of 32 Amp single phase 240 Volt, 50 Hz, water tight (IP-55) socket outlet with interlocking switch complete with all the fixing accessories as below.

10

-

-

... More
Supply & fixing of following size (GP RACEWAY- Fabricated from GP Sheet) race ways for electrical & LV wiring including neoprene gasket in joints, cutting the floor & jaming the race way / hanging in ceiling, supporting arrangement as approved by consultant / architect with all necssary hard ware (including civil work) as per site requirement. The thickness of raceway & cover shall be as per technical specification.

-

-

-

... More
100 mm wide x 40 mm deep.

900

-

-

... More
150 mm wide x 40 mm deep.

750

-

-

... More
200 mm wide x 40 mm deep.

630

-

-

... More
250 mm wide x 40 mm deep.

200

-

-

... More
300 mm wide x 40 mm deep.

250

-

-

... More
Supply & fixing of following size of Raceway Junction Box made out of GP Sheet for electrical & LV wiring including, cutting the floor & jaming the junction box / hanging in ceiling, supporting arrangement as approved by consultant / architect with all necssary hard ware (including civil work).(Junction box to be provided as per drawing/ as per site requirement & as per specification). The thickness of junction box shall be a as per thechnical specification.

-

-

-

... More
150 mm wide x 50 mm deep.

198

-

-

... More
200 mm wide x 50 mm deep.

75

-

-

... More
250 mm wide x 50 mm deep.

108

-

-

... More
300 mm wide x 50 mm deep.

60

-

-

... More
350 mm wide x 50 mm deep.

50

-

-

... More
Supply, Installation, Testing & Commissioning of Earthing Junction Box size - 400mm x 300mm x 80mm made out of 16 SWG CRCA sheet with seven tank process & powder coating, earthing link (32mm x 6mm copper strip) front door with glass as complete as required.

2

-

-

... More
Supply & Fixing of Rubber mat 1000 mm. Wide to withstand 1.1 KV dielectric strength as per latest IS 15652-2006.

45

-

-

... More
Supplying and Laying of Rubber mat 1000 mm. Wide to withstand 11 KV dielectric strength as per latest IS 15652-2006 etc. as reqd.

5

-

-

... More
Supplying & Placing of First aid box as approved by St.John Ambulance Brigade /Indian Red Cross society conforming to IS : 2217 - 1963 etc as reqd.

2

-

-

... More
Supplying & Installation of Shock treatment chart duly mounted on a wooden frame with glass on, as required in 2 languages (Hindi & English) etc. as reqd

5

-

-

... More
TOTAL FOR S.H.-I

-

-

-

... More
FIRE ALARM SYSTEM (ADDRESSABLE TYPE) AND PA SYSTEM

-

-

-

... More
Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications.

-

-

-

... More
Ten Loop Panel.

3

-

-

... More
Supplying, installation, testing & commissioning of central graphical fire alarm management system to centrally monitor and operate the fire alarm system complete as required.

3

-

-

... More
Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector acclimate type sensetive level (0.524%) OVS/ft. complete with mounting base complete as required.

2650

-

-

... More
Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required.

150

-

-

... More
Supplying, installation, testing & commissioning of addressable manual call point complete as required.

63

-

-

... More
Supplying, installation, testing & commissioning of addressable fire control module complete as required.

150

-

-

... More
Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required. (75 DBA @3 mtr. & 75CD flashing)

63

-

-

... More
Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required.

1290

-

-

... More
Supplying, installation, testing & commissioning of fault isolator complete with base as required.

140

-

-

... More
Supply, installation, testing and commissioning of addressable monitor module complete as per specification.

26

-

-

... More
Supplying, installation, testing & commissioning of fire fighter telephone handset complete as required. Same make as of Fire Alarm System

2

-

-

... More
Supplying, installation, testing & commissioning of fire fighter phone jack complete as required. Same make as of Fire Alarm System

64

-

-

... More
Supply Installation, Testing & Commissioning of fire fighter main console at control room including power supply and accessories.

1

-

-

... More
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

28630

-

-

... More
Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required.

5

-

-

... More
Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required.

5

-

-

... More
Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required.

350

-

-

... More
Supplying, installation, testing & commissioning of digital audio amplifier 480 Watt, supply complete as required.

5

-

-

... More
Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required.

-

-

-

... More
Speaker cable Single pair, 2-core, 1.5 sqmm

5250

-

-

... More
TOTAL FOR S.H.-II

-

-

-

... More
SUPPLY & INSTALLATION OF LIGHT FIXTURES & FANS

-

-

-

... More
SITC of following rating recess / surface mounted LED round / square shape down light luminarie with pressure die cast housing for single phase supply voltage Luminarie shall be confirm to IS: 10322 part -5 / section -2 or IEC :62722 withh all neccesary accessories as required.

-

-

-

... More
12W LED Round Down Light

501

-

-

... More
15 / 16 W LED Round Down Light

1609

-

-

... More
18 /20 W LED Round Down Light

660

-

-

... More
2' x 2' LED Panel Light

2843

-

-

... More
Bulk Head fitting with 9/10Watt LED.

106

-

-

... More
S.I.T.C of following rating surface mounted LED Tube Lighting Fitting Suitable for 230V 50 Hz, Single Phase Supply etc. complete as required.

-

-

-

... More
10/12 W LED Tube Light

409

-

-

... More
20/22 W LED Tube Light

1498

-

-

... More
30 W COB based round LED Light with multiple beam angles (36 Degree)

60

-

-

... More
SITC of 300 mm (12") Exhaust fan (Metal body) suitable for single phase 230 volts, 50 Hz., AC supply complete with motor, louvers/shutters etc. complete as required.

40

-

-

... More
Supply Installation, Testing & Commissioning of following sizes ceiling fan 3 Blades confirming to IS:374:2019 including wiring the down rods of standard (up to 30cm) with 1.5 sq.mm FR PVC insulated copper wire suitable for 230V 50 Hz, Single phase supply etc. complete as required.

-

-

-

... More
1200 mm ( 48") BLDC 5 Star rating 32W Ceiling Fan

892

-

-

... More
S.I.T.C of Following rating LED Street Lighting luminare with pressure die cast housing and toughened glass cover (IP 66 protection ) in existing pole / pipe for supply voltage 100-270 AC 50Hz Luminare shall be confirm to IS :10322 part 5/ section-3 and shall be complete with all nessessary accessories as required.

-

-

-

... More
60W LED Street Light

150

-

-

... More
S.I.T.C of Following rating LED Post Top lamp made in die cast aluminium housing with decorative clear / opel acrylic diffuser on existing pipe including connection with 1.5sq.mm coppwr conductor etc all complete as required.

-

-

-

... More
20/25W LED Post top lamp clear

10

-

-

... More
S.I.T.C of Following rating approved make LED Bpllard Fitting with cylindrical shape and inverted cone shape head of height 600 to 850 mm power input -8/9 watt with die cast aluminium housing opel with PC diffuser, IP-65/54 protection, conferming to IS : 10322 part 5 etc all complete as requird. (Excluding Plinth Charge.)

50

-

-

... More
Supplying & installation of 7 mtr. Height Octagonal Hot Dip galvanized pole (BOP. 7030) with top dia 70 mm bottom dia 130 mm & made of 3 mm thick sheet base plate dimensions 200x200x12 mm (LxBxT) including suitable size of foundation bolt all complete as required (without Arm).

150

-

-

... More
1m Single Arm Suitable for 70MM Top

150

-

-

... More
TOTAL FOR S.H.-III

-

-

-

... More
UPS SYSTEM

-

-

-

... More
Supply Installation, Testing & Commissioning of 50 KVA, ON Line UPS three phase input and three phase out put power system of in put voltage range 360V/380/V/400V/485V AC , Frequency range 40 HZ to 60 Hz, +/- 10% and out put voltage range 415V +/-1%, AC frequency range, 50Hz, +/-1% poower factor 0,8/3.1, Harmonic distrortion - 2% THD (Linear Load): 5% THD (Non- Liniear Load) along with required Batteries, Battery Stand, UPS Box Battery Lead etc as required.

-

-

-

... More
UPS shall carry design output at 40 deg.

-

-

-

... More
Shall have soft start and hold of for incoming supply.

-

-

-

... More
Invertor capability to supply 150% load for 5 sec.

-

-

-

... More
SNMP card, compatible for BMS connectivity on backnet/MODBUS, Inbuilt Isolation transforme.

-

-

-

... More
Shall not allow deep discharge of the battery and shall not go to 10.5 volts in case of 12 volt cells.

-

-

-

... More
Battery shall be external type with rack and suitable for 30 minute backup on 100% load.

-

-

-

... More
Suitable size of copper cable between UPS and battery bank shall be provided

-

-

-

... More
UPS shall be compatible for 3 nos unit in parallel operation. (Synchronize). Parallel operation kit shall be supplied with UPS.

-

-

-

... More
Total cost of 1 Set 50 KVA UPS, Batteries & Accessories (A+B+C)

4

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
Supply Installation, Testing & Commissioning of 30 KVA, ON Line UPS three phase input and three phase out put power system of in put voltage range 360V/380/V/400V/485V AC , Frequency range 40 HZ to 60 Hz, +/- 10% and out put voltage range 415V +/-1%, AC frequency range, 50Hz, +/-1% poower factor 0,8/3.1, Harmonic distrortion - 2% THD (Linear Load): 5% THD (Non- Liniear Load) along with required Batteries, Battery Stand, UPS Box Battery Lead etc as required.

-

-

-

... More
UPS shall carry design output at 40 deg.

-

-

-

... More
Shall have soft start and hold of for incoming supply.

-

-

-

... More
Invertor capability to supply 150% load for 5 sec.

-

-

-

... More
SNMP card, compatible for BMS connectivity on backnet/MODBUS, Inbuilt Isolation transforme.

-

-

-

... More
Shall not allow deep discharge of the battery and shall not go to 10.5 volts in case of 12 volt cells.

-

-

-

... More
Battery shall be external type with rack and suitable for 90 minute backup on 100% load.

-

-

-

... More
Suitable size of copper cable between UPS and battery bank shall be provided

-

-

-

... More
UPS shall be compatible for 3 nos unit in parallel operation. (Synchronize). Parallel operation kit shall be supplied with UPS.

-

-

-

... More
Total cost of 1 Set 30 KVA UPS, Batteries & Accessories (A+B+C)

1

-

-

... More
TOTAL FOR S.H.-IV

-

-

-

... More
DATA, TELEPHONE SYSTEM INCLUDING ACTIVE COMPONENTS

-

-

-

... More
Supply, Installation, Testing & Commissioning of Patch Panel Cat 6 U/FTP 24 Port- Loaded as per technical specification.

54

-

-

... More
Supply, Installation, Testing & Commissioning of Patch Panel Cat 6 U/FTP 48 Port- Loaded as per technical specification.

1

-

-

... More
Supply, Installation, Testing & Commissioning of Patch Cord Cat 6 U/FTP 3 feet as per technical specification.

530

-

-

... More
Supply, Installation, Testing & Commissioning of Patch Cord Cat 6 U/FTP 7 feet as per technical specification.

351

-

-

... More
Supply, Installation, Testing, Commissioning of Cat 6, 10G, U/FTP, Information Outlet including G.I. Box and modular cover plate as per technical specification.

881

-

-

... More
Supply , Installtion , Testing and comissioning of 15U wall mount rack with fans , 2 cable managers, satationary shelf , 2 Nos of hardware pkts as per technical specification.

19

-

-

... More
Supply, Installation, Testing & Commissioning of Network Rack 42 U with below included: Network Rack 800W x 2000H x 800D, Top cover with 4 x cutout, 2 x cutout for cable entry. Bottom cover with 4 x cutout for cable entry. All cutouts blanked with Plastic caps. 2 pairs, 42 U 19" Profile Type angle,Front & etc. complete as per technical specification.

1

-

-

... More
Supply, Installation, Testing & Commissioning of 24 port 10/100/1000Mbps, 4SFP module, L-2 Switch, POE as per technical specifications.

54

-

-

... More
Supply, Installation, Testing & Commissioning of 48 port 10/100/1000Mbps, 4 SFP Module, L-2 Switch, POE as per technical specifications.

1

-

-

... More
Supply, Installation, Testing & Commissioning of IP Based voice Communication System with 04 Port Voicemail ,04 Port FXS ,04 Port FXO ,1 PRI Trunk lines (30 Ch) Circuit with CLIP Facility , 800 IP users License ,01 Nos. IP Operator Console, 30 Party Conference ,Speed Dial, Music on Hold , Internal/ External ring difference ,Call Barring, Call Pickup, - Redundant server in active-Active mode as per technical specification.

1

-

-

... More
Supply, Installation, Testing & Commissioning of Type 1 IP Phone . Graphic LCD display with backlight 3 user accounts with multi-line appearance keys Local and company-wide phone directories.

10

-

-

... More
Supply, Installation, Testing & Commissioning of Type Basic Phone account , Full duplex speaker phone, .

341

-

-

... More
Supply, Installation, Testing & Commissioning of Core Switch 24 1Gb/10GBASE-T ports, 2 10Gb/40Gb QSFP+ ports, 4 10Gb/25Gb/40Gb/50Gb/100Gb capable QSFP28 ports, 2 populated power supplies slots, with suitabe fan module slots, supporting RIP, OSPF, VRRP L3 protocols from day one as per technical specification.

1

-

-

... More
Supply, Installation, Testing & Commissioning of SFP+ 10GBASE-SR 10 Gigabit Ethernet Optics, 850 nm for up to 300 m,transmission on multimode fiber (MMF).

2

-

-

... More
Supply, Installation, Testing & Commissioning of 6 Core OM4 Multimode Fiber Cable as per technical specification.

500

-

-

... More
Supply, Installation, Testing & Commissioning of 24 Port LC multimode loaded LIU.

20

-

-

... More
Supply , Installtion , Testing and comissioning of 48 port loaded LIU for core switch to access switch connectivity over fiber.

5

-

-

... More
Supply, Installation, Testing & Commissioning of LC - LC Fiber patch cord OM4, 3 Mtrs.

450

-

-

... More
Supply, Installation, Testing & Commissioning of 6 Core, Single Mode, OS2 as complete as required.

250

-

-

... More
Supply, Installation, Testing & Commissioning of wifi Access point as complete as required.

66

-

-

... More
TOTAL FOR S.H.-V

-

-

-

... More
IP CCTV SYSTEM

-

-

-

... More
Supplying, installation, testing & commissioning of 4MP or better IP Network TDN Low-Light IR Rugged Dome Camera, 1/3" CMOS or better, 4MP (2592 x 1520) @ 20fps or better, triple stream at various resolution up to 25fps, Min. Illumination required 0.01 lux @ F2.0 (color), 0 Lux IR On, 4 IR LEDs Smart IR with upto 30m IR distance, Auto ICR (Infrared Cut Filter) 120dB True WDR, S/N Ratio 55db, Shutter Speed 1 - 1/100,000; Adavance Video Compression technology such as H.265 & H.264 High Profile & MJPEG , Triple stream, , Stream Encryption, 256GB SD card support, PoE (802.3 af) and 12V DC, Max 6W, IP 66/67, IK 10 vandal proof with Die Cast Aluminium Housing, Having Operating temp range : –30°C to 60° C. Certifications: ONVIF Profile S/G/T compliant, UL.

226

-

-

... More
Supplying, installation, testing & commissioning of 4MP IP Network TDN Low-Light IR Rugged Bullet Camera, 1/2.7" CMOS or better, 4MP (2592 x 1944) @ 25fps or better, triple stream at various resolution up to 25fps, Min. Illumination required 0.008 lux @ F1.6 (color), 0 Lux IR On, 4 IR LEDs Smart IR with upto 50m IR distance, Auto ICR (Infrared Cut Filter) 120dB True WDR, S/N Ratio 50db, Shutter Speed 1/8 - 1/30,000; Adavance Video Compression technology such as H.265 & H.264 High Profile & MJPEG , Triple stream, 2.7 to 13.5mm 5X motorized focus & zoom lens, Field of View FoV H:85°-24°, BLC, HLC, 3DNR White Balance, Minimum Edge Intelligence Video Analytics : Motion Detection, Face Detection, 4Privacy Mask, 4 Region Of Intreset, TLS1.2, AES-128/256, SSH/Telnet closed, Stream Encryption, 256GB SD card support, PoE and 12V DC, Max 6W, IP 66/67, IK 10 vandal proof with Die Cast Aluminium Housing, Having Operating temp range : –30°C to 60° C. Certifications: ONVIF Profile S/G/T compliant, UL

30

-

-

... More
Supplying, installation, testing & commissioning of Outdoor 1/2.8 inch CMOS 2MP or better, IR PTZ Camera ; 40x Optical Zoom & 16x Digital Zoom, tripple stream; IR distance: 200 meter or better; Lens 4 -175mm Motorized Auto focus zoom lens; Memory card slot: Min 256GB support. Minimum Illumination- Sense up on- Color: 0.001 lux color, B/W: 0 lux IR On, WDR 120dB, Edge Video Analysis Video Motion Detection, Intrusion, Lioter, Counter & Tampering, 3DNR, BLC, HLC, White Balance, EIS, Defog, Mechanical switchable IR filter (Auto ICR), Pan Range 360° continuous, Tilt Range -10° to 90°, Pan/Tilt Modes - Pan: 0.1°/s - 180°/s; Tilt: 0.1°/s - 90°/s, Presets 200, Preset Accuracy 0.25 Deg, 16 Patrol & Tours, Alarm I/O - 2In/2Out, 2-Way Audio- 1/1 Channel In/Out, 256GB Memory card slot, 4 individually configurable privacy masks, 4 Region of Interest, POE+ or 24VAC 3A for indoor/Outdoor application, IP66/67, IK 10 ; Certifications: ONVIF Profile S/G/T compliant, UL

2

-

-

... More
Supplying, installation, testing & commissioning of IP Network Video Storage Manager Server Channel Network Video Storage Manager Server - NSM shall have Intel® Xeon Silver 4210R, 2.2 GHz or better, Mnimum 32GB RAM, 1+1 750W hot plug redundant power supply, OS drive: 2 x 240 GB in RAID 1; 12 field upgrade up to 20 TB SATA/SAS hard drive options for Video Recording, Data RAID Level: 0, 1, 5, 6, 10. NIC card 4 x 1GbE supporting network throughput of 800 MBPS, Windows Server 2019 R2 64- bit/Windows10 64-Bit IOT Operating System, Microsoft SQL Server/Express 2019. NSM Shall support upto 128 Cameras @ 1080P, 25fps, 09 Remote Client Licenses inbuilt, Web Clients, Monitor Layout up to 4x4, Digital Signature for Video Clip, Continous & Motion Based Recording options, up to 8X forawrd & backward palyback, Playback search as date/time timeline, time jump FWD/REV, bookmarks, calendar, preview, film strip, event search and SMART Motion Search as a min. NVR shall be ONVIF S/G/T certified and liested on ONVIF Website. NVR shall Support Two -Way Audio with cameras equiped with Microphone & Speaker. Each NSM shall be offered with 128TB Video Stoarge for Recording for 30 days.

4

-

-

... More
Supply, Installation, Testing and commissioning of Managable 24 port Switch with Power on Ethernet (PoE) enabled, 10/100, RJ45 Access ports with PoE complete as required.

14

-

-

... More
Supply, installation, testing and commissioning of of 16 TB HDD all accessories complete as required.

10

-

-

... More
Supply installation and commissioning of 55 inch LED monitor for disply of camera.

5

-

-

... More
TOTAL FOR S.H.-VI

-

-

-

... More
SOLAR PHOTO VOLTAIC POWER GENERATION SYSTEM

-

-

-

... More
Supplying installation testing and commissioning of Grid interactive roof top solar photo voltaic power generation system including all the required accessories like Solar PV module, Grid Tie invertor, arrey junction box, cabling & wiring, earthing, surge protection device, FRLSame structure for mounting of solar panel. The cell shall be PC mono crystaline cells of 6 inch each and module efficiency shall be more than 17%. Solar module shall have linear output warranty with degradation not exceeding 0.7% FRLSom 2nd Year onwards. Minimum 80% power output must be assured at end of 25 years. The FRLSont glass of solar module shall be low iron tempered glass ARC type. Termination box shall be Thermo-plastic, IP 67 or better, UV resistant with built-in-bypass. The nominal power of a single PV module shall be minimum 540 Wp or higher. Positive power tolerance modules only to be used. RF identification tag for each solar module shall be provided inside the module and must be able to withstand environmental conditions. The solar panel shall be complience of IEC 61215, IEC 61730 certified by TUV Rheinland / UL. The solar panel shall be installed as per BOQ & detailed technical specification.

100

-

-

... More
TOTAL FOR S.H.-VII

-

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
AUTOMATIC FIRE DETECTION GAS SUPPRESSION SYSTEM

-

-

-

... More
For Main LT Panel, Lift & Firefighting Panel

-

-

-

... More
Supply, fixing, testing and commissioning of Supply, fixing, testing and commissioning of Automatic Linear pneumatic Tube Detection based FK 5-1-12 Pre-Engineered System for Electrical Panels (consisting of the following components.)

-

-

-

... More
2.0 KG PESO Listed Cylinder Automatic Pre-Engineered System filled with Clean Agent FK 5-1-12, Fitted with DLP Valve mounted on Cylinder Push-In-Connector for Tube, Mounting Bracket, End of Line Adopter and UL Listed Low Pressure Switch for Monitoring System Activation.

32

-

-

... More
4.0 KG PESO Listed Cylinder Automatic Pre-Engineered System filled with Clean Agent FK 5-1-12, Fitted with DLP Valve mounted on Cylinder Push-In-Connector for Tube, Mounting Bracket, End of Line Adopter and UL Listed Low Pressure Switch for Monitoring System Activation.

6

-

-

... More
9.0 KG PESO Listed Cylinder Automatic Pre-Engineered System filled with Clean Agent FK 5-1-12, Fitted with DLP Valve mounted on Cylinder Push-In-Connector for Tube, Mounting Bracket, End of Line Adopter and UL Listed Low Pressure Switch for Monitoring System Activation.

12

-

-

... More
UL Listed Linear Pneumatic Heat Detection Tube with all necessary fittings & supports, HR Grade,UV Protected, MultiLayered, Made of Special Modified Polyamide Material, Inner diameter 4mm, Outer Diameter 6MM, Operating Pressure 15 8Bar, Maximum Pressure 30 Bar at maximum Temperature of +65 Degree C, Pressurized

2500

-

-

... More
Master Control Unit with Audio Visual Alarm with wiring to make complete system operational. The Control Panel should have provision for integration with Fire Alarm/SCADA/BMS System (Supply to be provide by the end client at 220 Volt AC).

50

-

-

... More
For Server Room

-

-

-

... More
Supply, fixing, testing and commissioning of UL Listed & PESO Approved High Pressure Seamless BIS 7285 approved Cylinders with contact Pressure Gauge & PESO Approved Valve, Including all fittings and accessories with Respective size mounting bracket. The cylinder size to be considered respective to filling density allowed by OEM

-

-

-

... More
140 Ltr (Master Cylinder)

1

-

-

... More
140 Ltr (Slave Cylinder)

1

-

-

... More
Supply, fixing, testing and commissioning of FK 5-1-12 manufactured by 3M, with Zero Ozone Depeltion Potential and Very Low Global Warming Potential of 1 with 20 Years Blue Sky Warantee against any regulatory Bans and Restrictions.

180

-

-

... More
Supply, fixing, testing and commissioning of Master Cylinder Kit complete Comprising all mandatory accessories : Electric Actuator, Manual Release Device, Discharge Hose - DN 50, Manifold Check Valve, Reset Toolkit, Cylinder Strap, Caution Advisory Signage’s, System should include Electric Control Head operated electrically from the detection and control system with a manual actuator and Wire Braided Flexible Rubber Hose with Elbow and connectors complete assembly to Connect Novec 1230 Cylinder Assembly Discharge outlet with Discharge Pipe or Discharge Manifold. On any displacement of solenoid valve, master cylinder kit shall be able to notify the fault by audio/visual mean.

1

-

-

... More
Supply, fixing, testing and commissioning of Slave Cylinder Kit Complete Comprising all mandatory Accessories: Pneumatic Release Device, Actuation Hose, Discharge Hose - DN 50, Manifold Check Valve, Cylinder Straps & Caution Advisory Signage’s to Connect FK 5-1-12 Slave Cylinders.

1

-

-

... More
Supply, fixing, testing and commissioning of 'Discharge Nozzles to Discharge FK 5-1-12 Gas in the Hazard Area as hydraulic calculation and flow rate required in 180 Deg/360 Deg Discharge Pattern.

3

-

-

... More
Supply, fixing, testing and commissioning of 'Discharge Pipe with Support and Fittings, CS Seamless to ASTM A-106 Schedule 40/50. along with threaded fittings of 3000# conforming to ANSI B 16.11

1

-

-

... More
Supply, fixing, testing and commissioning of 2 Zone Microprocessor Based Automatic Gas Extinguishing Panel with 2 Batteries. Two Zone automatic extinguishing panel should be CE Approved and Operates on 220-240 VAC, 10%, 50 Hz, 100W. Consisting Smoke Detector/Heat Detector/Multi Detector, Manual Release Switch. The Manual release switch module shall comply with the requirements of BS7273-1/UL, Abort Switch. The Abort switch module shall comply with the requirements of BS7273-1/UL, Hooter with Strobe Light, Response Indicator & Discharge And Pre Discharge Indicator., along with Loop Cable (2C x1.5mm) Armoured.(Fire Alarm System with respect to Room size)

1

-

-

... More
TOTAL FOR S.H.-VIII

-

-

-

... More
ACCESS CONTROL SYSTEM

-

-

-

... More
Supply ,Installation ,Testing & Commossioning of 4 Door 4 reader access control panel with onboard 32 Bit RISC ARM CPU, 8MB flash memory, shall support up to 30000 card user, 100000 event transactions, TCP/IP, the panel should have inbuilt 4 GB SD memory card to take mirror image of device configuration. data shall support standard Wiegand readers, Access Control panel should have MODBUS connectivity to integrate the panel with BMS (Building Management System), with metal enclosure & inbuilt power supply, facility of din-rail mounting should available. capable to integrate with IP/CCTV & NVR for access event alerts, Inbuilt door interlocking facility, SNMP alerts facility, Low battery and AC fail alert facility & reader Tamper detection alert facility should available.

4

-

-

... More
Supply ,Installation ,Testing & Commossioning of 2 Door 2 reader access control panel with onboard 32 Bit RISC ARM CPU, 8MB flash memory, shall support up to 50000 card user, 200000 event transactions, TCP/IP, the panel should have inbuilt 4 GB SD memory card to take mirror image of device configuration. data shall support standard Wiegand readers, Access Control panel should have MODBUS connectivity to integrate the panel with BMS (Building Management System), with metal enclosure & inbuilt power supply, facility of din-rail mounting should available. capable to integrate with IP/CCTV & NVR for access event alerts, Inbuilt door interlocking facility, SNMP alerts facility, Low battery and AC fail alert facility & reader Tamper detection alert facility should available .

12

-

-

... More
Supply, installation, testing and commissioning Short Range (up to 9 cm ) Smart Card Reader For Exit of Lift Access Doors , tripod/Flap barrier- Entry & Exit (doors) as per the specification.

10

-

-

... More
Supply, installation, testing and commissioning of contactless Clamshell 2K /2Application Area Smart Card suitable for Access Door as per the specification.

200

-

-

... More
Supply, installation, testing and commissioning Access Control System Server Software consisting of Access Control system , Alarm Document , Alarm management , All these along with high end security features consist in single package as per specification.

1

-

-

... More
Supply, Installation, testing & commissioning of Single Leaf Electro Magnetic Lock of Suitable Capacity(Min 600 lbs) as per specification .Approved.

-

-

-

... More
Single Door Leaf

22

-

-

... More
Double Door Leaf

8

-

-

... More
Supply and Laying of of 8 Core x 0.2 sq mm multi strand, copper, unarmored shielded Cable as per specification (between the every card readers & the access controllers)

3000

-

-

... More
Power Supply- Supply, Installation , testing and commissioning of 12 V SMPS DC Power Supply Unit, highly regulated and spikes free terminal voltage and heavy sourcing current for regulated terminal voltage.

30

-

-

... More
Magnetic Contact- Supply, Installation, Testing and commissioning of Magnetic Contact.

30

-

-

... More
Supply , Installation , Testing and commissioning of Single Front Facia Plate consisting of Soft Touch Push Buttons Emergency Exit Door Release and indicator LED to show the door status.

30

-

-

... More
Supply Installation testing and Commissioning of Biometric 50,000 templates (1: N) and 800,000 transaction records 3.5 in color TFT display Internal Camera supports capture and display (or storage) of the user’s image Standard backup battery Optional integrated proximity or smart card reader Built-in USB port allows for manual data transfer when the network isn’t available 8 user-defined function keys Relay contacts for access control applications Multi language support Audible and Visual indications for acceptance/ rejection of valid/invalid fingers SDK is available for OEM customers and software developers.

2

-

-

... More
TOTAL FOR S.H.-IX

-

-

-

... More
AV SYSTEM

-

-

-

... More
GROUND FLOOR RECEPTION

-

-

-

... More
Display System

-

-

-

... More
Supply Installation Testing and Commissioning of Fine Pitch Active LED Wall of 2.5 mm pixel pitch of Size 6.60 m x 2.03 m, Resolution: 2640 x 810, Pixel Density (pixels/m²): 1,60,000, Cabinet Material: Die-casting Aluminum, Refresh Rate: 3840 Hz, Viewing Angle (H × V): 160° x 150°, IP Rating (Front/Rear): IP50/IP50, LED Controller to manage the LED screen, Certifications: CE, FCC, CB, RoHS, REACH with Mechanical Structure to mount the LED screen.

2

-

-

... More
Supply Installation Testing and Commissioning of Fine Pitch Active LED Wall of 2.5 mm pixel pitch of Size: 2.40 m x 1.35 m, Resolution: 960 x 540, Pixel Density (pixels/m²): 1,60,000, Cabinet Material: Die-casting Aluminum, Refresh Rate: 3840 Hz, Viewing Angle (H × V): 160° x 150°, IP Rating (Front/Rear): IP50/IP50, LED Controller to manage the LED screen, Certifications: CE, FCC, CB, RoHS, REACH with Mechanical Structure to mount the LED screen.

2

-

-

... More
Switching System

-

-

-

... More
Supply Installation testing and Commissioning of Display and Projection system for MultiFormat Matri Switcher shall support full featured 2x USB-C connectivity at 4K, with 2x HDMI2.0 and USB 3.1 input. Supports HDMI 4K signal formats (4K UHD @60Hz RGB 4:4:4, up to 18 Gbps).Shall support built in control features, with 2x RS-232, TCP/IP, IR, 6x GPIO port and audio de-embedding functionality. It should have HDCP2.2, built in oscilloscope, advanced EDID manager for real time diagnostics of signal. Occupancy sensor connection (with 24V power supply). Must have 4x USB 3.1 hosting for peripherals device. 60 watt charging over single USB-C cable along with audio and video transmission; etc all complete.

2

-

-

... More
Cable Cubby

-

-

-

... More
Supply Installation testing and Commissioning of Cable Cubby Enclousre with HDMI, USB-C Connectivity, Flush mounted with all required accessories etc all complete.

2

-

-

... More
Cables. & Accessories

-

-

-

... More
Supply Installation testing and Commissioning of High Speaed HDMI Cable - 1 Meter with 4K UHD Support etc all comlete.

4

-

-

... More
Supply Installation testing and Commissioning of High Speaed HDMI Cable - 5 Meter with 4K UHD Support etc all comlete.

4

-

-

... More
Supply Installation testing and Commissioning of USB Type–C to USB-C Cable: 3 Feet etc. all complete.

4

-

-

... More
Supply Installation testing and Commissioning of Type A Male to Type A Female USB cable - 3 Meter.

2

-

-

... More
MEETING ROOM- 12 PAX

-

-

-

... More
Display System

-

-

-

... More
Supply Installation Testing and Commissioning of DLP / LCD laser projector, LCD Panel: 0.64" * 3 BrightEra LCD Panel Brightness: 5300 Lumens, Center lumens- 5800 Lumens, Resolution: 69,12,000 (192012003) Pixels, WUXGA (1920*1200) Contrast Ratio: ∞:1 (Infinite) Light Source: Laser Diode Lamp Life: 20,000 Hours Zoom Ratio: Manual (Approx. 1.6X) Throw Ratio: 1.23:1 to 1.97:1 Lens Shift: Manual; Vertical: -35% to +55%; Horizontal: +/- 15% Speaker Output: 16W Keystone Correction: Vertical: +/- 30 degrees; Horizontal: +/- 30 degrees Input Ports: Mini D-sub 15-pin, HDMI (2), HDBaseT, Video In, Audio In, Audio Out Control Ports: RS232, USB Type A, RJ45 Special Features: Reality Creation, Intelligent Settings, Bright View Dimensions: Approx. 422 x 129 x 338 mm (16 5/8 x 5 3/32 x 13 5/16 inches) Weight: Approx. 6.8 kg (15 lb)e.

1

-

-

... More
Supply Installation Testing and Commissioning of Motorized Projection Screen, Image Size: 123 inch diagonal, Fabric: Matt White, Aspect Ratio: 16:10, With Low Voltage Control Module & RF Remote Control etc all complete.

1

-

-

... More
Supply Installation Testing and Commissioning of Wireless presentation platform, BYOD wireless screen sharing, 4K UHD output resolution, No apps, no buttons, Enterprise level security.

1

-

-

... More
Switching System

-

-

-

... More
Supply Installation Testing and Commissioning of Switcher for VGA, DVI-I, HDMI and DisplayPort with Audio embedding, VGA, YPrPb, DVI, HDMI 1.4 and DP 1.1 with analog stereo audio from local inputs or embedded 7.1 HDR audio, Advanced EDID Management, No signal latency, zero frame delay, Pixel Accurate ReclockingSupports HDMI 4K signal formats (4K UHD @30Hz RGB 4:4:4 or @60Hz YUV 4:2:0, up to 9 Gbps).

1

-

-

... More
Cable Cubby

-

-

-

... More
Supply Installation Testing and Commissioning of Cable Cubby Enclousre with HDMI, VGA+Audio, USB-C to HDMI Cable Pass Through, Flush mounted with all required accessories etc all complete

1

-

-

... More
Supply & Laying of following size Cables & Accessories

-

-

-

... More
HDMI Cable

30

-

-

... More
VGA + Audio Cable

3

-

-

... More
USB-C to HDMI Cable

3

-

-

... More
HDMI Cable

1

-

-

... More
Supply Installation Testing and Commissioning of Chairman Unit Compact, attractive, ergonomic design, with LED indicator in the Discussion Device and in head of microphone. Unit shall have integrated Loudspeaker and Built-in headphone socket with output level control,The chairman has a separate microphone button and priority button enable the user to function as the chairperson at a conference or meeting. The chairperson’s microphone shall be activated when the priority button is pressed and held in with Frequency response 200Hz-12.5kHz and Loudspeaker nominal output 72dB SPL.

1

-

-

... More
Supply Installation Testing and Commissioning of Delegate Unit Compact, attractive, ergonomic design, with LED indicator in the Discussion Device and in head of microphone. Unit shall have integrated Loudspeaker and Built-in headphone socket with output level control,Color-coded light-ring indicator in head of microphone: green shall indicate that a request-to-speak has been added to the waiting list; green flashing shall indicate that the participant is first in the waiting list; red shall indicate that the microphone is active with Frequency response 200Hz-12.5kHz and Loudspeaker nominal output 72dB SPL.

11

-

-

... More
Supply Installation Testing and Commissioning of Digital Controller with Plug-and-play functionality for quick and easy connection of Discussion Devices. System control shall have Web browser control to view and manage system settings and loudspeaker and headphone socket for listening to recorded discussions before replaying them to the Floor, or listening to recordings,System controller shall have Built-in Digital Acoustic Feedback Suppression (DAFS) .Controller shall support up to 80 Discussion Devices with Frequency response 200Hz-12.5kHz Max. input (110 db SPL) 0.5% Sample rate 44.1kHz

1

-

-

... More
Supply Installation Testing and Commissioning of two-way, full-range surface mount speaker, LF transducer housed in a fire rated ABS plastic enclosure for extended LF performance down to 75 Hz. Maximum SPL 98.5 dB Sensitivity: 86.5 dB 15W transformer, weather-resistant IP54 as per IEC-60529. Transformer taps: 100 V: 15 W, 7.5 W. Frequency response (-10 dB):75 Hz - 20 kHz.

4

-

-

... More
Supply Installation Testing and Commissioning of 4 mic/line inputs, music source input, single zone Mixer amplfier with 120Watt RMS power, 100V Output, Individual Volume control, Master Bass and Treble Control. Mains power supply 230 VAC ±10%, 50 Hz Frequency response (Line) 80 Hz to 18 kHz (+1/‑3 dB @‑10 dB ref. rated output) Frequency response (Mic.) 80 Hz to 18 kHz (+1/‑3 dB @ ‑10 dB ref. rated output) Distortion 1% @ rated output power, 1 kHz Mic./Line input 4 x

1

-

-

... More
Supply Installation Testing and Commissioning of 19 "Equipment Rack,36 U Made of MS for housing of all above equipment , front lockable glass door, Fan tray fro colling, Caster wheel base , Main Panel with Spike Buster, Indivdual FUSE power supply unit, including all internal wiring/ interconnection as required

1

-

-

... More
Supply Installation Testing and Commissioning of of Handheld Wireless Mic with Cardiod polar pattern for transmitter,Dynamic microphone with Neodymium magnet , Receiver frequency response 80Hz-18kHz,Receiver RF sensitivity 1.0 µV,Receiver Image rejection55dB,Receiver Dyanmic range 95dB and receiver having 32 channels possible,Receiver S/N ratio 100dB A,distortion 1 %, Transmitter sensitivity - 3.2 mV/Pa,modulation:+/-40kHz.

1

-

-

... More
Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required.

-

-

-

... More
Speaker cable Single pair, 2-core, 1.5 sqmm

50

-

-

... More
MEETING ROOM - 35 PAX

-

-

-

... More
Display System

-

-

-

... More
Supply Installation Testing and Commissioning of DLP / LCD laser projector, LCD Panel: 0.64" * 3 BrightEra LCD Panel Brightness: 5300 Lumens, Center lumens- 5800 Lumens, Resolution: 69,12,000 (192012003) Pixels, WUXGA (1920*1200) Contrast Ratio: ∞:1 (Infinite) Light Source: Laser Diode Lamp Life: 20,000 Hours Zoom Ratio: Manual (Approx. 1.6X) Throw Ratio: 1.23:1 to 1.97:1 Lens Shift: Manual; Vertical: -35% to +55%; Horizontal: +/- 15% Speaker Output: 16W Keystone Correction: Vertical: +/- 30 degrees; Horizontal: +/- 30 degrees Input Ports: Mini D-sub 15-pin, HDMI (2), HDBaseT, Video In, Audio In, Audio Out Control Ports: RS232, USB Type A, RJ45 Special Features: Reality Creation, Intelligent Settings, Bright View Dimensions: Approx. 422 x 129 x 338 mm (16 5/8 x 5 3/32 x 13 5/16 inches) Weight: Approx. 6.8 kg (15 lb)

1

-

-

... More
Supply Installation Testing and Commissioning of Motorized Projection Lift, Aluminium Tubular Motorized Lift with LVC, RF remote, Max Projector size it can take : 600 x 600 x 250 ( W X D X H), , Carrying Weight Capacity : 25 kgs, Drop : 1000 mm ( 1 Mts) etc all complete

1

-

-

... More
Supply Installation Testing and Commissioning of Motorized Projection Screen, Image Size: 130 inch diagonal, Fabric: Matt White, Aspect Ratio: 16:10, With Low Voltage Control Module & RF Remote Control etc all complete

1

-

-

... More
Switching System

-

-

-

... More
Supply Installation Testing and Commissioning of Display and Projection system for 6x2 matrix switcher:- 6 video inputs and 2 video outputs - 4 HDMI 1.4 and 2 HD BaseT inputs and 2 independent HDMI outputs. 4K@30Hz, 3D capabilities and HDCP fully supported. should have 4 audio connectors for audio insertion and 2 audio outputs for de-embedding, PoE 48V remote (both inputs and outputs) etc. all complete.

1

-

-

... More
Supply Installation Testing and Commissioning of Multiformat Transmitter, HDMI, VGA, and Audio inputs, Extends VGA, DVI, HDMI 1.4 , Audio, Ethernet, RS-232, up to 120 Meter over one CAT5/6/7 cable, HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant, HDBaseT compatible, Pixel Accurate Reclocking, Supports HDMI 3D signal formats, Bi-directional RS-232 and IR extension (pass-through and control), Supports HDMI 4K signal formats (4K UHD @30Hz RGB 4:4:4 or @60Hz YUV 4:2:0, up to 9 Gbps) etc all complete

2

-

-

... More
Audio System

-

-

-

... More
Supply Installation Testing and Commissioning of Wireless system controller which shall be used as a standalone central control device for wireless connection and control of the Wireless Devices. System controll shall have web interface for system setup, configuration, control and licensing, Remote interfacing, using API to control microphones and 3rd party camera systems.Controller have possiblity to upload customer loog on all devices with Seamless automatic wireless frequency channel switching; up to 44 channels in the 2.4/5 GHz band.

1

-

-

... More
Supply Installation Testing and Commissioning of wireless Chairman unit with 4.3 inch capacitive touch screen and built‑in NFC reader for fast recognition of participants and microphone with selection button and volume control button. With pluggable high-directive microphone’ shall be a stylish high-directive microphone and removable lithium-ion Battery Pack. Chairmain unit loudspeaker and microphone can be active at the same time for a face to face meeting experience, unit shall have headphone rotary volume controls and Unit should operate in the 2.4 GHz and 5 GHz (UNII1, 2 (extended) and 3) (license free) band. Same unit can be configured as a chairman or delgate as an when required from the controller.

1

-

-

... More
Supply Installation Testing and Commissioning of wireless Delegate unit with 4.3 inch capacitive touch screen and built‑in NFC reader for fast recognition of participants and microphone with selection button and volume control button With pluggable high-directive microphone’ shall be a stylish high-directive microphone and removable lithium-ion Battery Pack. Chairmain unit loudspeaker and microphone can be active at the same time for a face to face meeting experience, unit shall have headphone rotary volume controls and Unit should operate in the 2.4 GHz and 5 GHz (UNII1, 2 (extended) and 3) (license free) band. Same unit can be configured as a chairman or delgate as an when required from the controller.

34

-

-

... More
Supply Installation Testing and Commissioning of Charger for five ‘Batteries’ shall include charging status indicators per Battery Pack. It shall be possible to loop-through the mains power supply of 2 to maximum five Chargers (the maximum number of loop-through Chargers is depending on the country mains supply voltage) so that up to 25 Battery Packs can be charged at the same time. A mains power supply, loop-through socket and mounting bracket shall be included with the product

7

-

-

... More
Supply Installation Testing and Commissioning of Handheld Wireless Mic with Cardiod polar pattern for transmitter,Dynamic microphone with Neodymium magnet , Receiver frequency response 80Hz-18kHz,Receiver RF sensitivity 1.0 µV,Receiver Image rejection55dB,Receiver Dyanmic range 95dB and receiver having 32 channels possible,Receiver S/N ratio 100dB A,distortion 1 %, Transmitter sensitivity - 3.2 mV/Pa,modulation:+/-40kHz

1

-

-

... More
Supply Installation Testing and Commissioning of Lapel Wireless Mic system that has a min of 14-hour battery life from two AA alkaline batteries. uni-directional polar pattern,condensor microphone ,frequency response 83Hz-18kHz,RF sensitivity 1.0 Uv,Image rejection55dB,Dyanmic range 95dB and receiver having 30 channels possible,S/N ratio 100dB A,dynamic range 95db B,distortion 1 %,frequency band:618-634MHz,modulation:+/-40kHz

1

-

-

... More
Supply Installation Testing and Commissioning of 4 mic/line level inputs with AEC, 4 mic/line level outputs, up to 8 channels of configurable USB audio, a 2-channel VoIP interface, and a standard FXO telephone interface, configuration and control for signal routing, mixing, equalization, filtering, and delay

1

-

-

... More
Supply Installation Testing and Commissioning of 8 channel Compact Mixer Class D Amplifier (5 x Mono + 3 x Stereo), Auxiliarys (FX, AUX) : 1 Pre, 1 Post, Class D Amplifier with Frequency Response, -3 dB: 22 Hz to 22 kHz, Crosstalk, 1 kHz Channel to Channel -78 dB, Max. dual channel output power : 2 x 550 W @ 4 Ω; 2 x 320 W @ 8 Ω ,stereo 24/48-bit multi effects processors, 30 Factory Presets, Tap-Delay, Digital Audio Interface Channels : 2 In / 2 Out, AD/DA Conversion, Sampling Rate : 32/44.1/48 kHz, Phantom power, switchable 48 V DC.

1

-

-

... More
Supply Installation Testing and Commissioning of Dual 4" two-Way Speaker with a Frequency Response(-10dB):- 70Hz-20Khz & Long Term Program Power Handling of ≤ 200W (at Nominal Impedance of 8ohms). The Loudspeaker should have a Sensitivity(1W/1m) of atleast 88dB with a Max. SPL of 112dB. It should have Built in LMT with Power Taps of 7.5/15/30W at70/100V Line. The Sound Dispersion should be 120x70 Degrees or more. The Speaker Should Come with OEM wall Mounting Bracket.

8

-

-

... More
Cable Cubby

-

-

-

... More
Supply Installation Testing and Commissioning of Cable Cubby Enclousre with HDMI, VGA+Audio, Cable Pass Through, Flush mounted with all required accessories etc all complete.

2

-

-

... More
Supply & Laying of following size Cables & Accessories

-

-

-

... More
HDMI Cable

8

-

-

... More
VGA + Audio Cable

6

-

-

... More
CAT6A cable F/UTP (as per actual) etc all complete

50

-

-

... More
Sheilded Audio Cable (as per actual) etc all complete

50

-

-

... More
Connector and Accessories

1

-

-

... More
Supply Installation Testing and Commissioning of Rack Structure 16U Air Cooled AV Equipment Rack with 4 Nos. of Vertical Power Strips, Cantilever Selves, Cable routing perforations, 4 No. of Spin Wheels.

1

-

-

... More
Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required.

-

-

-

... More
Speaker cable Single pair, 2-core, 1.5 sqmm

100

-

-

... More
TOTAL FOR S.H.-X

-

-

-

... More
DIESEL GENERATING SET

-

-

-

... More
Supply, Installation testing and Commissioning of Silent type Diesel Generating Set at 0.8 PF, 415 Volts, 50 cycles per second, 1500 rpm, 3 phase, suitable for parallel operation / PLC based synchronization, 0.85 load factor including circuit breaker for isolation, sound proof acoustic and weather proof enclosure, residential type silencer (as per latest CPCB norms) fabricated out of CRCA sheet of 16 SWG thickness with 9 tank pretreated before powder coating with ventillation system complete in all respects comprising of the following.

-

-

-

... More
Diesel Engine -

-

-

-

... More
Diesel Engine suitable for driving alternator of above rating, compression ignition, 4 stroke cycle, Radiator cooled, turbo charged, battery starting, 1500 RPM, suitable for above output of alternator at 40oC, 50% RH & at 210 M MSL and confirming to BS 5514, BS 649, IS 10000, capable of taking 10% overloading for one hour after 12 hrs of prime continuous loading, complete with all the accessories i.e. tachometer with hour meter, flexible coupling with guard, crank case of steel, crank shaft, conncting rods, electronic governing system, dynamically balanced flywheel, air intake manifold, Air cleaner, anti vibration pads, starter motor, including all other accessories required to complete the system.

-

-

-

... More
Instrument Panel - Engine mounted Instrument Panel fitted with and having digital display for followings :

-

-

-

... More
Start stop switch with key

-

-

-

... More
Water temperature indication

-

-

-

... More
Lubrication oil pressure indication.

-

-

-

... More
Lubrication oil temperature indication.

-

-

-

... More
Battery charging indication

-

-

-

... More
RPM indication

-

-

-

... More
Over speed indication

-

-

-

... More
Low Lube oil trip indication

-

-

-

... More
Engine hours indication

-

-

-

... More
Alternator -

-

-

-

... More
Synchronous Alternator of above capacity at 0.8 PF, 3 phase, 415 volts, 50 cycles, 4 wire, 1500 RPM, suitable for operation at 40 deg C, 50% RH & at 210 meter above MSL, capable of taking 10% overlioading for one hour after 12 hrs of prime continuous loading, brushless, self excited, self regulated through AVR, continuous duty confirming to IS 4722, BS 2613 suitable for tropical conditions, class H insulation, including terminal box suitable for bus duct termination / cable termination as required.

-

-

-

... More
Note : - Alternator should have with all other accessories as per specified in Technical specfications.

-

-

-

... More
Provision of installation of CT's before star point for Differential protection scheme. (DG sets for 1250 KVA only)

-

-

-

... More
6 nos of 2000 / 5 A CT's of PS class of suitable knee point voltage, magnetizing current & resistance.(3 CT's should be installed before star point of alternator) & 1 No. 1000 / 5A CL-5P10 (DG sets for 1010 KVA only)

-

-

-

... More
Base Frame - Both the engine and alternator shall be mounted on suitable base frame made of MS channel which shall be installed on cement concrete foundation and vibration isolating arrangement as per recommendations of manufacturer.

-

-

-

... More
Microprocessor based Power command controller (P.C.- 3.3 Jakson or equivalent) suitable for auto / manual synchronization & auto load sharing.

-

-

-

... More
Inbuilt Fuel tank of standard capacity complete with inlet and outlet connections, oil indication gauge, drain plug, air breather, fuel transfer system for automatic fuel refilling system with pump, piping, valves, level indicators etc. complete.

-

-

-

... More
Daily service Fuel tank of 990 liters capacity fabricated out of 2 mm thick MS sheet complete with inlet and outlet connections, oil indication gauge, drain plug, air breather, provision for fuel transfer system, level indicators and all standard accessories etc. as required.

-

-

-

... More
Exhaust Silencer - Exhaust manifold with residential silencer.

-

-

-

... More
The D G set should be supplied with required hardware for external PLC based auto synchronization, auto load sharing, auto load management system.

-

-

-

... More
Starting system - 24 Volt DC starting system comprising of starter motors : voltage regulator and arrangement for initial excitation complete with 12/24 Volts suitable nos. lead acid type batteries of suitable AH.

-

-

-

... More
Ventillation System - Arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air into the atmosphere as per standard specifications.

-

-

-

... More
1250 KVA

3

-

-

... More
Supply, Fixing, testing and Commissioning of Exhaust gas piping system of Class `B' MS pipe as per IS:1239 for upto 150 mm dia and for 200 mm dia & above MS pipe as per IS:3589 with welded joints, cut to required lengths with necessary bends, fittings, flanges, painting over primer coat, with mineral wool / rock wool insulation of minimum 75 mm thick of 150 Kg per cu M density on all sides of exhaust pipe, with chicken mesh wrapping and 26 SWG aluminium sheet cladding complete as required. The aluminum foil should be tightly cladded to insulation surface of pipe. The aluminum cladding shall be locked with sheet metal screws with other sections of aluminium foil. The measurement shall be done on the basis of centre line. (Stack height should be in accordance with emission regulations of CPCB, which will go well above the top most terrace) The exhaust piping system should be suitable for upto 550oC temperature, the surface temperature of exhaust pipe shall not exceed more than 60oC. (The rates are exclusive of support structure) (Note - Final size of exhaust pipe will be confirmed by the DG vendor after calculating the actual back pressure and submit the same to client / consultant for approval)

-

-

-

... More
400 mm dia (wall thickness - 4.85 mm)

160

-

-

... More
Supply & fixing of SS Bellow of following diameter

-

-

-

... More
400 mm dia

6

-

-

... More
Supply & fabrication of D G exhaust pipe supports by M.S angle iron of size not less than 100 x 50 mm x 6/8 mm duly grouted in the wall through minimum 8 mm thick plate and with suitable MS angle / channel iron structure. The entire MS support structure should be painted by 2 coats of anti corrosive paint over primer coat of approved shade and make. The design of support to be duly approved by the Structural Consultant / Architect before fabrication and installation.

16000

-

-

... More
TOTAL FOR S.H.-XI

-

-

-

... More
SUB- STATION WORK

-

-

-

... More
11 KV HT VCB FOUR BREAKER PANEL BOARD (INDOOR TYPE) (1 INCOMMING + 2 OUTGOING)

-

-

-

... More
Supplying, Installation, Testing & Commissioning of indoor type floor mounted metal clad, 11 KV VCB panel with 3 nos VCBs, totally inclosed & fully interlocked, horizontal drawout, horizontal isolation type breaker as per IS 13118, as amended up to date and additional specifications, having capacities as mentioned below, single break, trip free mechanism, manually charged and manually closing breaker suitable for use on 11 KV, 3 phase, 50 Hz A.C. supply with short circuit fault level of 350 MVA, complete with self contained, fully interlocked, rack in and rack out mechanism, air insulated but encapsulated copper bus bars of 630 Amp capacity, breaker featured with mechanical ON/OFF indicator with hand trip device.

-

-

-

... More
Spring release coil, shunt trip coil and auxiliary switch of 4 NO + 4 NC and equipped with following switchgears and accessories i/c connections for 3C x 300 sq.mm. XLPE 11 KV cable (cable entry from bottom), end termination with heat shrinkable jointing material etc. as required. (Note - Cost of end termination not included in this item).

-

-

-

... More
a) Incomming - 1 No, 630 Amp, VCB.

-

-

-

... More
b) 1 No.- 11 KV / 110 Volt PT class 0.5 accuracy and 100 VA burden with 1 No. voltmeter (0-12 KV), digital type, selector switch for voltmeter and protection MCB for HT Metering up to 12 KV on incommer.

-

-

-

... More
c) 1 No.- (0 - 150 A) dual scale Ammeter, digital type, selector switch for ammeters.

-

-

-

... More
d) 1 No - Microprocessor based numericak relay with O/C, E/F and S/C protection.

-

-

-

... More
e) 1 No - set of dual core dual ratio 3 CTs 150 / 75 / 5 / 5A of 15 VA burden and accuracy class 0.5 for metering and class 5P10 for protection.

-

-

-

... More
f) 1 No. electronic type digital energy analyser having 30 days memory and parameters of KW, KWH, Power factor, frequency etc. Suitable for BMS compatible with all accessories.

-

-

-

... More
g) 1 No. hooter with hooter acceptance and reset push button.

-

-

-

... More
h) 1 No - Red, Yellow & Blue for phase indication.

-

-

-

... More
i) 1 No - Amber for Trip indication.

-

-

-

... More
j) 1 No - Red `ON' Green `OFF'indication.

-

-

-

... More
k) 1 No - Spring charge indication.

-

-

-

... More
l) 1 No - Auto trip indication.

-

-

-

... More
m) 1 No. hooter with hooter acceptance and reset push button.

-

-

-

... More
n) 1 No. master trip relay. ( Electromechanical Type )

-

-

-

... More
o) 1 No.Trip ckt supervision relay. (Electromechanical Type )

-

-

-

... More
p) 1 No.under voltage relay. (Electromechanical Type )

-

-

-

... More
q) 1 No.Over voltage relay. (Electromechanical Type )

-

-

-

... More
BUSBARS

-

-

-

... More
600 Amp TP copper busbar with coloured heat shrinkable sleeve.

-

-

-

... More
a) Outgoing - 2 No, 630 Amp, VCB.

-

-

-

... More
b) 2 No.- (0 - 80 Amp) dual scale Ammeter, digital type, selector switch for ammeters.

-

-

-

... More
c) 2 No - Microprocessor based numericak relay with O/C, E/F and S/C protection.

-

-

-

... More
d) 2 No - set of dual core dual ratio 3 CTs 80 / 40 / 5//5 A of 15 VA burden and accuracy class 0.5 for metering and class 5P10 for protection.

-

-

-

... More
e) 2 No. electronic type digital energy analyser having 30 days memory and parameters of KW, KWH, Power factor, frequency etc. Suitable for BMS compatible with all accessories.

-

-

-

... More
f) 2 No. hooter with hooter acceptance and reset push button.

-

-

-

... More
g) 2 No - Red, Yellow & Blue for phase indication.

-

-

-

... More
h) 2 No - Amber for Trip indication.

-

-

-

... More
i) 2 No - Red `ON' Green `OFF'indication.

-

-

-

... More
j) 2 No - Spring charge indication.

-

-

-

... More
k) 2 No - Auto trip indication.

-

-

-

... More
l) 2 No. hooter with hooter acceptance and reset push button.

-

-

-

... More
m) 2 No. master trip relay. ( Electromechanical Type )

-

-

-

... More
n) 2 No.Trip ckt supervision relay. (Electromechanical Type )

-

-

-

... More
o) 2 No.auxiliary relay for transformer fault.

-

-

-

... More
p) Power pack.

-

-

-

... More
H.T. Panel described as above

1

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
TRANSFORMER

-

-

-

... More
Design, manufacture, supply, installation, testing and commissioning of out door type copper wound transformer continuously rated for 3Ph 50 Hz at full load rating the transformer should have oil immersed winding having vector group DY-11, HT side connected in star with neutral brought out connected to provide separate earthing. The transformer shall have power terminal arrangement bushing / cable end box on HT side and cable end box on LT side. 1600 KVA, 11 KV /0.415 KV, 3 phase, 6.25 % impedance, 50 Nos channels with stoppers shall be provided and fixed on the provided plinth for mounting the Transformer. The transformer should have following standard as per amended IS specification and the load * no load losses shall be limited to the values given below or as per IS 2026 and latest IS-1180 or Norms issued by SEB which ever are Lower.

-

-

-

... More
Oil Conservator with filling hole with cap and plain oil level gauge.

-

-

-

... More
Silica gel dehydrating breather charged with silica gel.

-

-

-

... More
Oil drain Valve

-

-

-

... More
Oil Filter Valve

-

-

-

... More
Lifting eyes / Hooks

-

-

-

... More
Two earthing Terminals

-

-

-

... More
Diagram and rating plate

-

-

-

... More
Air Vent

-

-

-

... More
Explosion Vent

-

-

-

... More
100 mm dia thermo meter with thermometer pocket

-

-

-

... More
Four bi directional plain roller

-

-

-

... More
Buchholz relay

-

-

-

... More
Resistance Temp detector

-

-

-

... More
Marshalling box

-

-

-

... More
Automatic Voltage Regulator ( AVR)

-

-

-

... More
Remote Tap Changing controller ( RTCC)

-

-

-

... More
Transformer 11000/415 volts with on load Tap changer -15% to +5% in steps of 1.25% with RTCC, AVR and marshalling box and other specification as per BIS

-

-

-

... More
1600 KVA

2

-

-

... More
TOTAL FOR S.H.-XII

-

-

-

... More
ELECTRICAL PANEL

-

-

-

... More
DG SYNCHRONIZING CUM CHANGEOVER PANEL ( 3x1250 KVA DG SET)

-

-

-

... More
Supply, Installation, Testing & commissioning of Main DG Control panel with D.G. Synchronizing relay & Micro PLC, this will be floor mounted, free standing, compartmentalized, indoor duty, dust proof, vermin proof, front operated, electrical panel fabricated from 14 SWG CRCA sheet steel, class - IP 4X painted and manufactured exactly as per specifications laid in this document and will be complete with the main and auxiliary bus bars, interconnection, earth terminals, earth bus and will be powdered coated finished. All the busbar joint shall be protected by clip on type sleeve. The DG control panel shall use all draw out 3 position withdrawn type breakers suitable for 415 V AC, 3 phase, 50 Hz, 4 wire supply system and will have fault level of 50 KA or as required as per consultant approval. The panel will be made as per detailed specifications and drawings forming part of this document. (Under no case temperature of LT Panel shall be more at any point of the panel, otherwise necessary exhaust fan shall be have to provided) Bus bar calculations considering temperature derating, enclosure derating, sleeving derating must be done and submitted for checking. Panel shall be of (TTA) Type Tested Assembly with form 4B seperation as per IEC 61439-1 & 2 (TTA panel- L&T-Ti,Schneider-Blokset,Seimens-seipan,ABB-ar2k)

-

-

-

... More
All Incoming / bus coupler / Outgoings ACB's shall have inbuilt microprocesor based Over load protection (L), Short Circuit protection (S), Instantaneous Short Circuit protection (I), Earth Fault protection (G), Shunt Trip releases. All ACB should have Ics=Icu=Icw=50 KA for 1 sec, fully rated at 50 deg C ambient temperature & shall be supplied with adopter terminal connection whose orientation can be changed at site. All ACB shall be supplied with all standard accessories i.e. auxillary switch with 4NO + 4NC contacts, cradle, handle, safety shutter in confirmity with IS:60947

-

-

-

... More
All Incoming / bus coupler / Outgoings ACB's shall have inbuilt current, volatage metering, ZSI (for discrimination) with trip history. All four pole ACB's shall have neutral protection at 50% and 100% . All ACB Shall have common frame till 3200 Amp.

-

-

-

... More
The Panel shall have a provision for AUTOMATIC FIRE DETECTION GAS SUPPRESSION flooding system for complete panel of each compartment / section including gas bank of required capacity (Note - Gas Supression flooding sysytem having seperate item).

-

-

-

... More
Note - Complete panel have BMS compactible. Manufacturer shall provide all types of ports, Potential free contact, Aux contactor as required for integration with BMS.

-

-

-

... More
AUTO OPERATION OF INCOMER / BUSCOUPLER ACB's.

-

-

-

... More
Micro PLC shall be provided to achieve the Changeover, Interlocking and and following functions.

-

-

-

... More
Changeover of Incommer and Bus coupler.

-

-

-

... More
Interlocking.

-

-

-

... More
Synchronizing of D.G. Set through synchronizing relay OR Synchronizing of D.G. Set through PCC 3.3 controller in case of Cummins Make D.G. Set.

-

-

-

... More
Necessary hardware shall be provided to achieve above functions including micro PLC with real time clock, digital inputs/outputs, MMI with 2 line display, power supply, auxillary relays, PB's indication etc. & software for the above.

-

-

-

... More
Automatic system shall be user friendly and shall have manual override.

-

-

-

... More
3 Nos. 2000A feeder incomer and Each incomer breaker feeder shall have following: (For 3 x 1250 KVA D.G. Set)

-

-

-

... More
One set of Generator control relay for Each D.G. Set with accessories for AMF, Load Management, Synchronizing and Interlocking through micro PLC. (Make of relay - Woodword / Dief).

-

-

-

... More
One number incomer 3P 2000 amps EDO breaker with 630 Amp TP neutral contactor. for Each breaker shall have microprocessor based releases for O/C,S/C & earth fault protection with instantaneous. (50 KA).

-

-

-

... More
3 No. indicating lamps to show the incoming power along with protection SP MCB's.

-

-

-

... More
1 No. Digital AVF Meter with CT's.

-

-

-

... More
1 No. Differential relay

-

-

-

... More
Announciation window to cover LLOP, HWT, OIL Pressure, U/V, O/V, U/F, O/F, O/C, E/F, Differential relay faults shall be provided. 2 nos phase reversal relay shall be provided.

-

-

-

... More
Engine should trip on LLOP, HWT, oil temp, O/V, O/F and breaker should trip on other faults.

-

-

-

... More
Initially U/V & U/F will be bye passed till oil pressure is picked up.

-

-

-

... More
Indicating lights for ACB ON / OFF, ACB trip, neutral contactor ON, D.G. on mains, D.G. fails to start.

-

-

-

... More
Generator start /stop facility through push button from panel, necessary cranking relay shall be provided.

-

-

-

... More
Suitable battery charger for 24V 360 AH with d.c voltmeter & d.c ammeter. D.C voltmeter and ammeter will be analouge type.

-

-

-

... More
Whenever D.G. stop through PB, load shall be disconnected first.

-

-

-

... More
BUSBARS

-

-

-

... More
5000 Amp TPN busbars of aluminium alloy as per SLD.

-

-

-

... More
OUTGOING

-

-

-

... More
EACH OUTGOING FEEDER SHALL HAVE DIGITAL KWH METER.

-

-

-

... More
3 No. 2500 Amp FP MDO Air Circuit Breaker (50 KA)

-

-

-

... More
DG Synchronisation Panel Described as Above.

1

-

-

... More
MAIN L.T. PANEL

-

-

-

... More
Supply, Installation, Testing & commissioning of Main LT Panel. The panel will be totally enclosed type with, free standing, floor mounted, indoor duty, dust & vermin proof, compartmentlized, front operated, electrical panel fabricated from 14 SWG CRCA sheet steel as per specifications & drawing laid in this document and will be complete with the main and auxiliary bus bars, ammeter, ammeter selector switch, voltmeter, voltmeter selector switch, indication lamps, CT's, protection MCB, interconnection wiring, earth bus and will be powder coated finish with 70 micron thickness. All the busbar joint shall be protected by clip on type sleeve. The Main LT Panel shall use all draw out type breakers suitable for 415 V AC, 3 phase, 50 Hz, 3 phase 4 wire supply system. The panel shall have changeover facility & interlocking through PLC to achieve electrical interlocking, buscoupler switching, auto operation of incommer and bus coupler etc and having following incomming and outgoing Air Circuit Breakers, MCCB as per the drawing and specification. Fault level shall be 50 KA. Panel shall be of (TTA) Type Tested Assembly with form 4B seperation as per IEC 61439-1 & 2 (TTA panel- L&T-Ti,Schneider-Blokset,Seimens-seipan,ABB-ar2k)

-

-

-

... More
(Each Incomming / outgoing MCCB shall have microprocessor release and variable current setting from front, adjustable overcurrent, short circuit & earth fault protection, front extended lockable handle, pad lockable in off position, shrouding on incomer side, termination shall be suitable for aluminium bus bars / cables and as per specification.)

-

-

-

... More
EMS software with screens, dashboards / Modbus data, Ethernet gateways, 8 port ethernet switch and reports for atleast 50 devices (Multi Function & Energy Meters). Software shall comply latest cybersecurity standards as per IEC62443-4-1 and IEC62443-4-2 (SL1) & ISO 50001.

-

-

-

... More
The Panel shall have a provision for AUTOMATIC FIRE DETECTION GAS SUPPRESSION flooding system for complete panel of each compartment / section including gas bank of required capacity (Note - Gas Supression flooding sysytem having seperate item).

-

-

-

... More
Note - Complete panel have BMS compactible. Manufacturer shall provide all types of ports, Potential free contact, Aux contactor as required for integration with BMS.

-

-

-

... More
INCOMERS from 2 Nos. 1600 KVA Transformers

-

-

-

... More
1 nos. 2500 AMP. Four Pole, Electrically operated 3 position motorized (220 V AC) drawout type Air Circuit Breaker with all inbuilt protections, with microprocessor based release, over current, earth fault, short circuit, Instantaneous short circuit, closing coil (220 V AC), trip coil (24 V DC), shunt trip release, inbuilt U/V release with LCD / LED display for event history & measurement of current parameters, 50 KA Breaking Capaciy with all standard accessories i.e. auxillary switch with 4NO + 4NC contacts, cradle, handle, safety shutter in confirmity with IS:60947

-

-

-

... More
The ACB shall be electrically interlocked with the bus coupler, DG incomers and other transformer incomers.

-

-

-

... More
1 nos. 32 amp TP MCCB (50 KA) for OLTC (for each transformer incomer)

-

-

-

... More
1 nos. 630 amp TP MCCB (50 KA) (without U/V protection) for Fire Fighting Pump Panel (As per SLD only)

-

-

-

... More
Protection releases / relays, Metering & Accessories for each Transformer incomers

-

-

-

... More
Surge Protection Device - Type - 01 (Class - B), 10/350 µ sec. (100 / 25KA)

-

-

-

... More
Over Voltage / Under Voltage relay / release (3 phase) with timer.

-

-

-

... More
Backup earth fault relay.

-

-

-

... More
Restricted earth fault relay.

-

-

-

... More
There shall be a provision : - If REF operates, they send a signal to Upstream HT breaker of Transformer incomer ( in HT Panel) to make it "OFF" for protection of transformer.

-

-

-

... More
Master trip relay.

-

-

-

... More
Trip Circuit Supervison relay.

-

-

-

... More
TNC switch.

-

-

-

... More
Auto manual selector switch.

-

-

-

... More
1 nos. 0-500 volt range digital type voltmeter with selector switch

-

-

-

... More
1 set of 3 CT's of ratio 2500/5A, Class 1.0 accuracy 15 VA burden for metering.

-

-

-

... More
1 set of 3 CT's of ratio 2500/5A, Class 1.0 accuracy 15 VA burden for APFCR.

-

-

-

... More
1 set - 415 / √3 / 110 / √3 Class 1.0 accuracy 100 VA burden PT along with primary and secondary fuse.

-

-

-

... More
1 set of 4 CT's of ratio 2500/1A, Class PS for protection.

-

-

-

... More
1 no. CT's of ratio 2500/5A, Class 5P10 for protection.

-

-

-

... More
1 no. 0-2500 Amp range digital type ammeter with selector switch.

-

-

-

... More
Energy analyser (digital type) consisting of I, V, KW, KWH, KVA, PF, HZ, MDI (EM 6400 of Conzerve or equi.) with RS 485 communication port for communication / report generation. (or Dual meter)

-

-

-

... More
Power factor meter.

-

-

-

... More
Frequency meter.

-

-

-

... More
3 Nos. LED type phase indicating lamps, each lamp shall be with bakup MCB along with hooter, auxillary relay, 2 sets of push buttons.

-

-

-

... More
5 Nos. LED type indicating lamp for indicating the status of feeder - ON / OFF / TRIP / Trip circuit healthy / DC supply healthy. Each lamp shall be with bakup MCB.

-

-

-

... More
INCOMERS from 2 Nos. DG Synchronizing Panel

-

-

-

... More
1 nos. 2500 AMP. Four Pole, Electrically operated 3 position motorized drawout type Air Circuit Breaker, with all inbuilt protections, with microprocessor based releases/relays, over current, earth fault, short circuit, Instantaneous short circuit, shunt trip release, closing coil (220 V AC), trip coil (24 V DC), inbuilt U/V release with LCD / LED display for event history & measurement of current parameters, 50 KA Breaking Capaciy with all standard accessories i.e. auxillary switch with 4NO + 4NC contacts, cradle, handle, safety shutter in confirmity with IS:60947

-

-

-

... More
Protection releases / relays, Metering & Accessories for each D G set incomers

-

-

-

... More
Master trip relay.

-

-

-

... More
Trip Circuit Supervison relay.

-

-

-

... More
TNC switch.

-

-

-

... More
Auto / manual / test selector switch

-

-

-

... More
1 Set - 415 /v3 / 110 / v3 Volts PT Class 1.0 accuracy and 100 VA burden along with primary & secondary MCB.

-

-

-

... More
0-500 volt range digital type voltmeter with selector switch

-

-

-

... More
1 set - 3 CTs of ratio : 2500/5A , Class 1.0 accuracy 15 VA each burden for metering.

-

-

-

... More
1 set - 3 CTs of ratio : 2500/5A , Class 5P10 accuracy 15 VA each burden for protection.

-

-

-

... More
0-2500 Amp range digital type ammeter with selector switch.

-

-

-

... More
Energy analyser (digital type) consisting of I, V, KW, KWH, KVA, PF, HZ, MDI (EM 6400 of Conzerve or equi.) with RS 485 communication port for communication / report generation. (or Dual meter)

-

-

-

... More
Frequency meter.

-

-

-

... More
Power Factor meter.

-

-

-

... More
1 No -12 point Temp Scanner with Alarm/ Trip contact for winding & bearing.

-

-

-

... More
3 Nos. LED type phase indicating lamps, each lamp shall be with bakup HRC fuse/MCB along with hooter, auxillary relay, 2 sets of push buttons.

-

-

-

... More
5 Nos. LED type indicating lamp for indicating the status of feeder - ON / OFF / TRIP / Trip circuit healthy / DC supply healthy. Each lamp shall be with bakup HRC fuse/MCB.

-

-

-

... More
12 window annunciator with accept / reset / test push button for each DG set for following indications and alarm : set fail to start, engine over heat, high temperature, excitation failure, low lube oil pressure, over speed, low fuel oil level, cooling water flow failure, breaker trip, generator fault, DC control supply failure, out of limit voltages and spares.

-

-

-

... More
Push buttons for Test. Accept. Reset. Fault Reset. Engine start, Engine stop, ACB close, ACB Trip Emergency stop.

-

-

-

... More
Shut down due to low lube oil pressure/High water temp/Over speed/Low fuel level - set of 4 indication lamps.

-

-

-

... More
Note : In normal case all three lamps shall be ON to indicate that incoming power supply is available. In case of power resumption after failure buzzer shall ring to indicate the power supply is resumed. There shall be one push button to acknowledge the same.

-

-

-

... More
The ACB shall be electrically interlocked with the bus coupler and Transformer incomers.

-

-

-

... More
BUSCOUPLER

-

-

-

... More
1 no 2500 AMP Four Pole, Electrically operated 3 position motorised (220V AC) drawout type ACB's, closing coil (220V AC), trip coil (24V DC), with 50 KA Breaking Capacity with all standard accessories i.e. auxillary switch with 4NO + 4NC contacts, cradle, handle, safety shutter in confirmity with IS:13947-2.

-

-

-

... More
Protection releases / relays, Metering & Accessories for Bus Coupler (s)

-

-

-

... More
Trip circuit supervision relay

-

-

-

... More
TNC switch.

-

-

-

... More
Auto / manual selector switch

-

-

-

... More
5 Nos. LED type indicating lamp for indicating the status of feeder - ON / OFF / TRIP / Trip circuit healthy / DC supply healthy. Each lamp shall be with bakup HRC fuse/MCB.

-

-

-

... More
The bus coupler shall be electrically interlocked with all incoming ACB's in such a way that at any one time two supply should not get mixed up.

-

-

-

... More
BUSBARS

-

-

-

... More
3200 Amp TPN busbars of aluminium alloy as per SLD.

-

-

-

... More
MICRO PLC FOR AUTO OPERATION OF INCOMER / BUSCOUPLER ACB's.

-

-

-

... More
Auto changeover.

-

-

-

... More
Incomers & Buscouplers switching.

-

-

-

... More
BATTERY & BATTERY CHARGER

-

-

-

... More
1 No. 24V, 72AH SMF Battery with suitable battery charger for control supply.

-

-

-

... More
OUTGOING

-

-

-

... More
All outgoing feeder shall be provide with ON / OFF / Trip indication lamp with protection MCB's, Dual Source energy Meter.

-

-

-

... More
04 Nos 1600A FP MDO Air Circuit Breaker (50KA)

-

-

-

... More
02 Nos 1250A FP MDO Air Circuit Breaker (50KA)

-

-

-

... More
02 Nos 630A TP MCCB (50 KA)

-

-

-

... More
01 No 630A FP ON Load Changeover (50 KA)

-

-

-

... More
04 No 400A TP MCCB (50 KA)

-

-

-

... More
03 No 250A TP MCCB (50 KA)

-

-

-

... More
Main L.T. Panel Described as Above.

1

-

-

... More
AUTOMATIC POWER FACTOR CORRECTION PANEL (CAPACITOR PANEL)

-

-

-

... More
Supply, Installation, testing & commissioning of 14 SWG CRCA sheet steel fabricated cubical type 600 KVAR A P F C Panel with 14% Detuned LC Filter consisting of 5 /10 / 25 / 50 / 100 KVAR (at 415 Volts rated voltage of bank shall be 525 Volts) capacitor units in tier formation, housed in an integrated cubicle type automatic switching ON and OFF control panel, floor mounting, dust & vermin proof, front operated construction, enclosure class - IP 4X, powder coated after proper treatment with 9 tank process with top/bottom removable gland plates, as required, double compression type cable glands, earth bus, hinged and lockable doors to achieve dust and vermin proof complete with all inter connections small wiring by min. 2.5 sq. mm. copper wires, ckt labels etc. The Aluminium Bus Bar shall be of suitable length, 500 volts, 3 phase 50 Hz TPN, electrolytic aluminium as per IS 8623 . Panel shall be of (TTA) Type Tested Assembly with form 4B seperation as per IEC 61439-1 & 2 (TTA panel- L&T-Ti,Schneider-Blokset,Seimens-seipan,ABB-ar2k)

-

-

-

... More
The Panel shall have a provision for AUTOMATIC FIRE DETECTION GAS SUPPRESSION flooding system for complete panel of each compartment / section including gas bank of required capacity (Note - Gas Supression flooding sysytem having seperate item).

-

-

-

... More
All out going MCCB's shall be thermal-magnetic based with inbuilt O/L & S/C release.

-

-

-

... More
All MCCB's shall be Ics = 100% Icu, with rotary handle & pad locking arrangement, with adjustable O/L & S/C trip setting as per load requirement. All TP MCCB shall be with heavy duty solid isolable neutral link. The breaking capacity specified is Ics value. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmeter, selector switches, CT's, PT's, etc.

-

-

-

... More
AC3 duty contactors should be used for switching individual capacitor banks.

-

-

-

... More
The fault withstanding capacity of panel & its control gear shall be min. 50 KA rms for 1 sec.

-

-

-

... More
Each section of capacitor panel shall have Verticle hood & exhaust fans for ventilation purpose.

-

-

-

... More
INCOMING

-

-

-

... More
Incomer circuit breaker has been included in the main panel.

-

-

-

... More
1 set- 3 CTs , ratio 1250 / 5A Class 1.0 accuracy 15 VA burden for metering.

-

-

-

... More
1Nos- (1250 A) digital Ammeter with selector switch

-

-

-

... More
Micro processor based automatic power factor control relay (3 phase) (including power factor meter) in 13 steps for automatic cut off or add on capacitor units to keep the power factor at 0.95 with variation of loads. All associated auxiliary contactors / relays shall be provided with in the scope of work.

-

-

-

... More
Phase indicating lamps with HRC fuses, and indicating in each capacitor chamber unit to indicate On/Off status of capacitor unit.

-

-

-

... More
BUS BARS

-

-

-

... More
1600 AMP, 500 Volts, 3 phase 50 HZ TPN high conductivity electrolytic Aluminium bus bar of suitable length, SMC / DMC supports, with colour coding and insulated by heat shrinkable sleeves and clips on shrouds for joints.

-

-

-

... More
OUTGOINGS

-

-

-

... More
3 nos. of 250 AMPS TPN MCCB (50 KA) and 250 amps AC3 duty contactor with 100 KVAR, MPP resin filled, super heavy duty ,525 V capacitor bank, with copper coil 14 % detuned filters . auto-manual selector switch, start stop push button for manual operation including on/off indicating lamps and delay timer complete.

-

-

-

... More
4 nos. of 125 AMPS TPN MCCB (50 KA) and 150 amps AC3 duty contactor with 50 KVAR, MPP resin filled, super heavy duty ,525 V capacitor bank, with copper coil 14 % detuned filters . auto-manual selector switch, start stop push button for manual operation including on/off indicating lamps and delay timer complete.

-

-

-

... More
3 nos. of 63 AMPS TPN MCCB (50 KA) and 80 amps AC3 duty contactor with 25 KVAR, MPP resin filled, super heavy duty ,525 V capacitor bank, with copper coil 14 % detuned filters, auto-manual selector switch, start stop push button for manual operation including on/off indicating lamps and delay timer complete.

-

-

-

... More
2 nos. of 32 AMPS TPN MCCB (50 KA) and 40 amps AC3 duty contactor with 10 KVAR, MPP resin filled, super heavy duty ,525 V capacitor bank, with copper coil 14 % detuned filters, auto-manual selector switch, start stop push button for manual operation including on/off indicating lamps and delay timer complete.

-

-

-

... More
1 no. of 16 AMPS TPN MCCB (50 KA) and 20 amps AC3 duty contactor with 5 KVAR, MPP resin filled, super heavy duty ,525 V capacitor bank, with copper coil 14 % detuned filters, auto-manual selector switch, start stop push button for manual operation including on/off indicating lamps and delay timer complete.

-

-

-

... More
Capacitor Panel as described above

2

-

-

... More
MAIN ELECTRICAL PANEL

-

-

-

... More
Supply, installation, testing & commissioning of 14 SWG CRCA sheet steel fabricated cubical type Main Electrical Panel, floor mounting, dust & vermin proof, front operated construction, enclosure class - IP 4X, powder coated after proper treatment with 9 tank process with top/bottom removable gland plates, as required, double compression type cable glands, earth bus, hinged and lockable doors to achieve dust and vermin proof complete with all inter connections small wiring by min. 2.5 sq. mm. FRLS copper wires, ckt labels etc. The Aluminium Bus Bar shall be of suitable length, 500 volts, 3 phase 50 Hz TPN, electrolytic aluminium as per IS 8623 . The panel feeders shall be suitable for terminating suitable nos. 3.5 / 4 core armoured aluminium cable as required. Panel shall be of (TTA) Type Tested Assembly with form 4B seperation as per IEC 61439-1 & 2 (TTA panel- L&T-Ti,Schneider-Blokset,Seimens-seipan,ABB-ar2k)

-

-

-

... More
All Incoming / bus coupler / Outgoings ACB's shall have inbuilt microprocesor based Over load protection (L), Short Circuit protection (S), Instantaneous Short Circuit protection (I), Earth Fault protection (G), Shunt Trip releases. All ACB should have Ics=Icu=Icw=50 KA for 1 sec, fully rated at 50 deg C ambient temperature & shall be supplied with adopter terminal connection whose orientation can be changed at site. All ACB shall be supplied with all standard accessories i.e. auxillary switch with 4NO + 4NC contacts, cradle, handle, safety shutter in confirmity with IS:60947

-

-

-

... More
All incoming MCCB's shall be microprocessor based with O/L & S/C and E/F protection.

-

-

-

... More
All outgoing MCCB's shall be microprocessor based with O/L and S/C protection.

-

-

-

... More
All MCCB's shall be Ics = 100% Icu, with rotary handle & pad locking arrangement, with adjustable O/L & S/C trip setting as per load requirement. All TP MCCB shall be with heavy duty solid isolable neutral link.

-

-

-

... More
INCOMING

-

-

-

... More
2 Nos. 1600 Amp FP EDO ACB (50 KA)

-

-

-

... More
2 No.multifunction Meter with inbuilt selector switch.

-

-

-

... More
2 Set of phase indicating lamps with Single Pole MCB.

-

-

-

... More
2 Set of ON / OFF indicating lamps with Single Pole MCB.

-

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
BUS COUPLER

-

-

-

... More
1 no 1600 AMP Four Pole, Electrically ACB's,

-

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
BUSBAR

-

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
2000 Amp TPN aluminium busbar with coloured heat shrinkable sleeve.

-

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
OUTGOING

-

-

-

... More
4 Nos. 1000 Amp TP MDO ACB (50 KA)

-

-

-

... More
3 Nos.630 Amp FP MCCB (35KA)

-

-

-

... More
03 Nos. 400 Amp FP MCCB (35 KA)

-

-

-

... More
07 Nos. 250Amp FP MCCB (35KA)

-

-

-

... More
10 Nos. 200 Amp FP MCCB (35 KA)

-

-

-

... More
04 Nos. 160 Amp FP MCCB (35 KA)

-

-

-

... More
05 Nos. 100 Amp FP MCCB (35 KA)

-

-

-

... More
Panel described as above

1

-

-

... More
DISTRIBUTION PANEL

-

-

-

... More
Supply, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital ammeter with inbuilt ammeter selector switch, digital voltmeter with inbuilt voltmeter selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the incomming and outgoing MCCB shall have 25 KA Ics.The incoming MCCB shall be microprocessor based with O/L & S/C and E/F protection and all Outgoings up to 250A MCCB's may be thermo-magnetic based O/L & S/C protection. All outgoing MCB's shall be C type with 10 KA breaking capacity.

-

-

-

... More
L+P PANEL BASEMENT

-

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
INCOMING

-

-

-

... More
1 No. 200 Amp FP MCCB (35 KA)

-

-

-

... More
1 No.multifunction Meter with inbuilt selector switch.

-

-

-

... More
1 Set of phase indicating lamps with Single Pole MCB.

-

-

-

... More
1 Set of ON / OFF indicating lamps with Single Pole MCB.

-

-

-

... More
BUSBAR

-

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
250 Amp FP aluminium busbar with coloured heat shrinkable sleeve.

-

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
OUTGOING

-

-

-

... More
05 Nos. 25 Amp FP MCB (10 KA)

-

-

-

... More
08 Nos. 40 Amp FP MCB (10 KA)

-

-

-

... More
05 Nos. 63 Amp FP MCB (10 KA)

-

-

-

... More
Panel described as above

1

-

-

... More
AHU PANEL (GROUND TO 5TH FLOOR)

-

-

-

... More
INCOMING

-

-

-

... More
1 No. 200 Amp FP MCCB (35 KA)

-

-

-

... More
1 No.multifunction Meter with inbuilt selector switch.

-

-

-

... More
1 Set of phase indicating lamps with Single Pole MCB.

-

-

-

... More
1 Set of ON / OFF indicating lamps with Single Pole MCB.

-

-

-

... More
BUSBAR

-

-

-

... More
250 Amp FP aluminium busbar with coloured heat shrinkable sleeve.

-

-

-

... More
OUTGOING

-

-

-

... More
8 Nos. 40Amp FP MCB (10 KA)

-

-

-

... More
12 No. 63 Amp FP MCB (10 KA)

-

-

-

... More
Panel described as above

6

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
L+P PANEL ( GROUND TO 5TH FLOOR)

-

-

-

... More
INCOMING

-

-

-

... More
1 No. 200 Amp FP ON LOAD CHANGEOVER MCCB (35 KA)

-

-

-

... More
1 No. 200 Amp FP MCCB (35 KA)

-

-

-

... More
1 No.multifunction Meter with inbuilt selector switch.

-

-

-

... More
2 Set of phase indicating lamps with Single Pole MCB.

-

-

-

... More
2 Set of ON / OFF indicating lamps with Single Pole MCB.

-

-

-

... More
BUSBAR

-

-

-

... More
250 Amp FP aluminium busbar with coloured heat shrinkable sleeve.

-

-

-

... More
OUTGOING

-

-

-

... More
06 Nos. 25 Amp FP MCB (10 KA)

-

-

-

... More
04 No. 40 Amp FP MCB (10 KA)

-

-

-

... More
10 Nos. 63 Amp FP MCB (10 KA)

-

-

-

... More
03 Nos. 63 Amp FP MCCB (25 KA)

-

-

-

... More
Panel described as above

6

-

-

... More
LIFT PANEL (TERRACE FLOOR)

-

-

-

... More
INCOMING

-

-

-

... More
2 No. 400 Amp FP MCCB (35 KA)

-

-

-

... More
1 No Fixed type Automatic transfer switch 400 Amp rating in open frame with  live to live transfer time  150ms. The ATS should have complete switching neutral with zero position having positive isolation and on load manual operation complying to IEC 60947-3 and IEC 60947-6-1. The control unit shall be integral part of the ATS.

-

-

-

... More
1 No. multifunction Meter with inbuilt selector switch.

-

-

-

... More
1 Set of phase indicating lamps with Single Pole MCB.

-

-

-

... More
1 Set of ON / OFF indicating lamps with Single Pole MCB.

-

-

-

... More
BUSBAR

-

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
500 Amp TPN aluminium busbar with coloured heat shrinkable sleeve.

-

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
OUTGOING

-

-

-

... More
15 Nos.63 Amp FP RCCB (300 mA).

-

-

-

... More
06 Nos.40 Amp FP MCB (10 KA).

-

-

-

... More
Panel described as above

1

-

-

... More
PRESSURIZATION PANEL ( TERRACE FLOOR )

-

-

-

... More
INCOMING

-

-

-

... More
1 No. 400 Amp FP MCCB (35 KA)

-

-

-

... More
1 No. multifunction Meter with inbuilt selector switch.

-

-

-

... More
1 Set of phase indicating lamps with Single Pole MCB.

-

-

-

... More
1 Set of ON / OFF indicating lamps with Single Pole MCB.

-

-

-

... More
BUSBAR

-

-

-

... More
500 Amp TPN aluminium busbar with coloured heat shrinkable sleeve.

-

-

-

... More
OUTGOING

-

-

-

... More
28 Nos.63 Amp FP MCB (10 KA).

-

-

-

... More
02 Nos.40 Amp FP MCB (10 KA).

-

-

-

... More
Panel described as above

1

-

-

... More
VENTILATION PANEL ( BASEMENT FLOOR )

-

-

-

... More
INCOMING

-

-

-

... More
1 No. 250 Amp FP MCCB (35 KA)

-

-

-

... More
1 No.multifunction Meter with inbuilt selector switch.

-

-

-

... More
1 Set of phase indicating lamps with Single Pole MCB.

-

-

-

... More
1 Set of ON / OFF indicating lamps with Single Pole MCB.

-

-

-

... More
BUSBAR

-

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
300 Amp TPN aluminium busbar with coloured heat shrinkable sleeve.

-

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
OUTGOING

-

-

-

... More
10 Nos.63 Amp FP MCB (10 KA).

-

-

-

... More
02 Nos.40 Amp FP MCB (10 KA).

-

-

-

... More
Panel described as above

1

-

-

... More
UPS I/C PANEL ( BASEMENT FLOOR )

-

-

-

... More
INCOMING

-

-

-

... More
2 No. 400 Amp FP MCCB (35 KA)

-

-

-

... More
2 No.multifunction Meter with inbuilt selector switch.

-

-

-

... More
2 Set of phase indicating lamps with Single Pole MCB.

-

-

-

... More
2 Set of ON / OFF indicating lamps with Single Pole MCB.

-

-

-

... More
BUSBAR

-

-

-

... More
500 Amp TPN aluminium busbar with coloured heat shrinkable sleeve.

-

-

-

... More
OUTGOING

-

-

-

... More
5 Nos. 160Amp FP MCCB (35 KA).

-

-

-

... More
Panel described as above

1

-

-

... More
UPS O/G PANEL ( BASEMENT FLOOR )

-

-

-

... More
INCOMING

-

-

-

... More
4 No. 160 Amp FP MCCB (35 KA)

-

-

-

... More
4 No.multifunction Meter with inbuilt selector switch.

-

-

-

... More
4 Set of phase indicating lamps with Single Pole MCB.

-

-

-

... More
4 Set of ON / OFF indicating lamps with Single Pole MCB.

-

-

-

... More
BUSBAR

-

-

-

... More
400 Amp TPN copper busbar with coloured heat shrinkable sleeve.

-

-

-

... More
OUTGOING

-

-

-

... More
4 Nos. 160Amp FP MCCB (35 KA).

-

-

-

... More
7 Nos. 100Amp FP MCCB (35 KA).

-

-

-

... More
3 Nos. 63Amp FP MCCB (35 KA).

-

-

-

... More
Panel described as above

1

-

-

... More
UPS PANEL-01 (BASEMENT FLOOR )

-

-

-

... More
INCOMING

-

-

-

... More
1 No. 100 Amp FP MCCB (35 KA)

-

-

-

... More
1 No.multifunction Meter with inbuilt selector switch.

-

-

-

... More
1 Set of phase indicating lamps with Single Pole MCB.

-

-

-

... More
1 Set of ON / OFF indicating lamps with Single Pole MCB.

-

-

-

... More
BUSBAR

-

-

-

... More
200 Amp FP aluminium busbar with coloured heat shrinkable sleeve.

-

-

-

... More
OUTGOING

-

-

-

... More
6 Nos.40 Amp FP MCB (10 KA).

-

-

-

... More
02 Nos.25 Amp FP MCB (10 KA).

-

-

-

... More
Panel described as above

1

-

-

... More
UPS PANEL ( 1ST TO 5TH FLOOR)

-

-

-

... More
INCOMING

-

-

-

... More
1 No. 100 Amp FP MCCB (35 KA)

-

-

-

... More
1 No.multifunction Meter with inbuilt selector switch.

-

-

-

... More
1 Set of phase indicating lamps with Single Pole MCB.

-

-

-

... More
1 Set of ON / OFF indicating lamps with Single Pole MCB.

-

-

-

... More
BUSBAR

-

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
200 Amp FP aluminium busbar with coloured heat shrinkable sleeve.

-

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
OUTGOING

-

-

-

... More
06 Nos. 40 Amp FP MCB (10 KA)

-

-

-

... More
04 Nos. 63 Amp FP MCB (10 KA)

-

-

-

... More
Panel described as above

5

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
EMERGENCY LIGHTING PANEL ( UPPER BASEMENT FLOOR )

-

-

-

... More
INCOMING

-

-

-

... More
1 No. 100 Amp FP MCCB (35 KA)

-

-

-

... More
1 No.multifunction Meter with inbuilt selector switch.

-

-

-

... More
1 Set of phase indicating lamps with Single Pole MCB.

-

-

-

... More
1 Set of ON / OFF indicating lamps with Single Pole MCB.

-

-

-

... More
BUSBAR

-

-

-

... More
200 Amp FP aluminium busbar with coloured heat shrinkable sleeve.

-

-

-

... More
OUTGOING

-

-

-

... More
22 Nos.40 Amp FP MCB (10 KA).

-

-

-

... More
02 Nos.25 Amp FP MCB (10 KA).

-

-

-

... More
Panel described as above

1

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
LAUNDARY PANEL

-

-

-

... More
INCOMING

-

-

-

... More
1 No. 250 Amp FP MCCB (35 KA)

-

-

-

... More
1 Nomultifunction Meter with inbuilt selector switch.

-

-

-

... More
1 Set of phase indicating lamps with Single Pole MCB.

-

-

-

... More
1 Set of ON / OFF indicating lamps with Single Pole MCB.

-

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
BUS BAR

-

-

-

... More
300 Amp TPN aluminium busbar with coloured heat shrinkable sleeve.

-

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
OUTGOING

-

-

-

... More
10 Nos.63 Amp FP MCB (10 KA).

-

-

-

... More
07 Nos.40 Amp FP MCB (10 KA).

-

-

-

... More
Panel described as above

1

-

-

... More
CSSD PANEL

-

-

-

... More
INCOMING

-

-

-

... More
1 No. 250 Amp FP MCCB (35 KA)

-

-

-

... More
1 No.multifunction Meter with inbuilt selector switch.

-

-

-

... More
1 Set of phase indicating lamps with Single Pole MCB.

-

-

-

... More
1 Set of ON / OFF indicating lamps with Single Pole MCB.

-

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
BUS BAR

-

-

-

... More
250 Amp FP aluminium busbar with coloured heat shrinkable sleeve.

-

-

-

... More
OUTGOING

-

-

-

... More
09 Nos.63 Amp FP MCB (10 KA).

-

-

-

... More
06 Nos.63 Amp FP MCB (10 KA).

-

-

-

... More
Panel described as above

1

-

-

... More
KITCHEN PANEL

-

-

-

... More
INCOMING

-

-

-

... More
1 No. 250 Amp FP MCCB (35 KA)

-

-

-

... More
1 No.multifunction Meter with inbuilt selector switch.

-

-

-

... More
1 Set of phase indicating lamps with Single Pole MCB.

-

-

-

... More
1 Set of ON / OFF indicating lamps with Single Pole MCB.

-

-

-

... More
BUS BAR

-

-

-

... More
300 Amp TPN aluminium busbar with coloured heat shrinkable sleeve.

-

-

-

... More
OUTGOING

-

-

-

... More
08 Nos.63 Amp FP MCB (10 KA).

-

-

-

... More
06 Nos.40 Amp FP MCB (10 KA).

-

-

-

... More
08 Nos.25 Amp FP MCB (10 KA).

-

-

-

... More
16 Nos.63 Amp DP MCB (10 KA).

-

-

-

... More
12 Nos.40 Amp DP MCB (10 KA).

-

-

-

... More
Panel described as above

1

-

-

... More
EXTERNAL LIGHTING PANEL (OUTDOOR TYPE)

-

-

-

... More
Supply, installation, Testing & Commissioning of Outdoor Type Panel with Front & Back double door, Top canopy, Mounting on Floor M.S. Stand etc totally enclosed free standing type water, moisture, dust and vermin proof Sub Distribution Board made out of 2.0 mm thick CRCA sheet complete with following equipments, including ammeter, ammeter selector switch, voltmeter, voltmeter selector switch, indicating lamps, CT's, internal wiring with suitable size wires/ cable, interconnection, painting etc as required.

-

-

-

... More
INCOMING

-

-

-

... More
1 No 100 Amp FP Moulded Case Circuit Breaker (35 KA) with 100 Amp 4 Pole Contactor & Astronomical Timer .

-

-

-

... More
1 No. Digital multifunction Meter with inbuilt selector switch and CT' & SP MCB.

-

-

-

... More
1 Set of phase indicating lamps.

-

-

-

... More
1 Set of ON/OFF indicating lamps with SP MCB.

-

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
BUS BARS

-

-

-

... More
200 Amp FP aluminium busbar with coloured heat shrinkable sleeve.

-

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
OUTGOING

-

-

-

... More
08 Nos. 25 Amp DP MCB (10 KA)

-

-

-

... More
03 Nos. 40 Amp DP MCB (10 KA)

-

-

-

... More
Panel described as above

1

-

-

... More
TOTAL FOR S.H.-XIII

-

-

-

... More
FUEL HANDLING EQUIPMENT

-

-

-

... More
Supply, Installation, Testing & Commissioning of 25 KL capacity mild steel horizontal cylindrical underground HSD tank (2.5M dia & 5.5M length) with shell 6mm and end plate 10mm thick suitable for underground installation complete with manhole accessories, fittings, piping inside the tank Decanting hose, bucket filter, foot valve etc. with paint with inside surface scrapped clean. Tank will be tested at works under hydrostatic pressure of 5 psi before being painted with two coats of Red Oxide Primer as required as per specifications.

1

-

-

... More
Supply, fixing, testing and commissioning of M.S. heavy class ERW piping (Class-C) conforming to IS : l239 with necessary clamps, supports, anti vibration mountings, hangers and fittings such as bends, tees, reducers etc. painted as per specifications:

-

-

-

... More
80 mm dia

11

-

-

... More
40 mm dia

132

-

-

... More
25 mm dia

198

-

-

... More
VALVES & STRAINERS

-

-

-

... More
Supply, Fixing and Testing of following valves, strainers, in the H.S.D. Fuel Handling System piping complete with companion flanges, nut bolts, gaskets, supports and painted etc. as per specifications :

-

-

-

... More
Ball valves :

-

-

-

... More
80mm dia.

3

-

-

... More
40mm dia.

8

-

-

... More
25mm dia.

16

-

-

... More
Non return valves :-

-

-

-

... More
40mm dia

4

-

-

... More
Y-strainers :-

-

-

-

... More
40mm dia.

4

-

-

... More
80mm dia.

1

-

-

... More
Supply, Laying, Testing & Commissioning of 1 No. 40mm dia M.S. heavy class ERW piping (Class-C) conforming to IS : 1239 complete with fittings such as bends, tees, reducer sets on surface/hume pipe or directly in ground including excavation, sand cushioning, 4 mm PYPCOT protective covering and refilling the trench etc. as required.

-

-

-

... More
In Ground / On surface

55

-

-

... More
Supply and erection of canopy type M.S.Structure made out of 40mm medium class M.S. pipe (Class-B), 25 x 25 x 3 mm angle iron frame work and 14 SWG GI Sheet. Structure shall be grouted in C.C. 1:2:4 foundation for hanging 4 Nos. 9 litre each fire fighting buckets including providing buckets with two coats of anticorrosive paints etc. complete as required.

1

-

-

... More
Supply & erection of 3 HP Flame Proof positive displacement type HSD pump inside the fuel tank yard having mechanical seal complete with all accessories, fixing on M.S. channel including making earthing as required.

-

-

-

... More
110 LPM, Suction head not less than 3.5 m

2

-

-

... More
Supply and fixing of flow meter for diesel line as required with Flow rate 10.3 to 11 mcu/hr

-

-

-

... More
80mm dia.

1

-

-

... More
25mm dia.

4

-

-

... More
Supply, Installation, Testing & Commissioning of 16A TP Flame Proof out door type isolator switch, M.S. Stand, earthing etc complete as required.

2

-

-

... More
Liasioning work for getting the HSD Yard layout drawing approval and licence / NOC from concern department.

1

-

-

... More
HVAC

-

-

-

... More
AHRI CERTIFIED CENTRIFUGAL WATER COOLED CHILLING MACHINE

-

-

-

... More
Supply, installation, testing and commissioning of Water Cooled Centrifugal Chilling M/C of 425 TR actual capacity at below mentioned operating conditions with R-134 A refrigerant, open / semihermatic / hermatically sealed Centrifugal compressor, direct / gear driven by suitable KW Sq. Cage induction motor complete with variable speed drive, water-cooled shell & tube condenser, insulated shell and tube flooded chiller, flow switches at condenser & chiller outlet, refrigerant piping, Refrigerant and Oil (First Charge), flexible pipe connector at condenser & chiller inlet / outlet, integral lubrication system, Microprocessor based control panel, factory supplied chiller mounted / floor standing Variable Speed Drive(VSD) & accessories etc. all mounted on M.S. frame. Suitable capacity squirrel cage induction motor with class 'B' insulation suitable for operation on 400+/-10% volts, 50Hz, A.C. supply. The Unit shall be mounted IP 54 rated VFD Starter of suitable capacity. The chilling m/c as described above shall be in line with specifications & shall have interface card compatible with BMS system.

-

-

-

... More
Twin rotor based semi-hermetic type single/ multiple horizontal compressor complete with automatic capacity control from 100%-20%, safety switches, forced feed lubrication system etc., as per specifications. 1 no. - matching shell & tube flooded/falling film type even water pass chiller for Centrifugal type units of MS shell and copper tubes and pressure drop not exceeding 10.0 meters as per CPWD Specifications. Evaporator and condenser shall be manufactured, tested and stamped with ASME(U) pressure vessel code.

-

-

-

... More
All Chiller shall be tested at 4 points at 100%, 75%, 50% and 25% at AHRI conditions at manufacturer test bed before dispatch.

-

-

-

... More
Manufacturer’s AHRI Certified Selection Performance Sheet to be submitted to evaluate and verify the specified performance parameters.

-

-

-

... More
Water flow switches at outlet of condenser & chiller, water drain, air purge valves, thermometers and pressure gauges wherever required.

-

-

-

... More
Initial/first charge of refrigerant gas & compressor oil shall be factory charged. Refrigerant line accessories comprising of safety valves, angle valve, liquid line indications, liquid level control etc.

-

-

-

... More
Frame work for mounting the above condenser, chiller compressor and motor with base plate complete with anti-vibration pads/springs. RCC / cement concrete foundation for the chilling unit.

-

-

-

... More
CONDENSOR SIDE

-

-

-

... More
CDW IN - 32.22º C.

-

-

-

... More
CDW OUT - 37.77º C.

-

-

-

... More
FLOW - 4720 LPM

-

-

-

... More
Fouling Factor (MKS) - 0.0002

-

-

-

... More
Pressure Drop Max - 8.5 Meter

-

-

-

... More
CHILLER SIDE

-

-

-

... More
CHW IN - 12.77º C.

-

-

-

... More
CHW OUT - 6.11º C.

-

-

-

... More
FLOW - 3775 LPM

-

-

-

... More
Fouling Factor (MKS) - 0.0001

-

-

-

... More
Pressure Drop Max - 7.5 Meter

-

-

-

... More
IKW / TR (Maximum) - 0.68

-

-

-

... More
ARI Certified Centrifugal Water Cooled Chilling Machine With Variable Speed Drive & Microprocessor Based Control Panel Of Capacity 425 TR (4W + 1S) The price quoted for supply, installation, testing & commissioning of Centrifugal Chilling Unit shall be inclusive of all duties & taxes, insurance, transportation / shipment cost from works to site, loading / unloading, port clearance charges etc. as required in Indian Rupees.

5

-

-

... More
CHILLER PLANT OPTIMISER

-

-

-

... More
Supply, installation, testing and commissioning of 64 bit, UL Listed BACnet (BTL certified) Supervisory Controller for management level interface in MS Mild Steel Enclosure powder coated grey colour for SUPERVISORY CONTROLLER, IO CARDS (with accessories like Transformer, MCB, internal wiring and Relays with bases) (A) The Network supervisory Controller shall have imbedded graphic capability for generating web based user graphics and support Multi user with simultaneous minimum 4 user login facility (B) Unlimited user without additional license (C) Shall be browsed by Microsoft Internet Explorer and Netscape Navigator (D) BTL certified (E) Web engine should be 64 bit configuration (F) Should have inbuilt IO points (G) Functionally able to act as a DDC controller also apart from Supervisory controller function (H) Web engine should support ASHRAE standard BACnet MS/TP protocol, Proprietary Protocol shall not be accepted (I) Web engine should support integration of third party protocol ( eg Modbus-RTU) seamlessly without adding additional hardware (J) Web engine should support DHCP function for IP addressing. (K) All Peripheral Systems required to complete the work of CPO.

1

-

-

... More
All equipment in the Centralized Chilled Water Plant Shall be Controlled through Chiller Plant Optimiser.

-

-

-

... More
All field devices and sensors required for the operation of CPO shall be paid separately under BMS BOQ

-

-

-

... More
All Cables used for the CPO shall be screened LSZH type. The cables, conduits, cable tray & glands will be paid separately as per actual measurements in Electrical BOQ.

-

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
PRIMARY CHILLED WATER PUMPS

-

-

-

... More
Supply, installation, testing and commissioning of End Suction chilled water centrifugal pump sets with bronze impeller for chilled water recirculation complete with TEFC Sq. Cage induction motor with class "F" insulation, base plate, coupling guard, vibration isolators, SS Shaft, factory fitted mechanical seal, flexible pipe connector at inlet and outlet etc. conforming to technical specification & as per following parameters. The chilled water pumps shall also include the cost of thermal insulation. (4W+1S)

-

-

-

... More
Capacity of Each Pump (LPM) 3775

-

-

-

... More
Pump Head (Mt) 15.00

-

-

-

... More
Motor HP 25.0

-

-

-

... More
Minimum Efficiency 70 %

-

-

-

... More
Chilled Water Pump Sets (4W+1S) as mentioned above. The price quoted for supply, installation, testing & commissioning of imported Pumps shall be inclusive of all duties & taxes, insurance, transportation / shipment cost from works to site, loading / unloading, port clearance charges etc. as required in Indian Rupees.

5

-

-

... More
SECONDARY CHILLED WATER PUMPS

-

-

-

... More
Supply, installation, testing and commissioning of End Suction chilled water centrifugal pump sets with bronze impeller for chilled water recirculation complete with TEFC Sq. Cage induction motor with class "F" insulation, base plate, coupling guard, vibration isolators, SS Shaft, factory fitted mechanical seal, flexible pipe connector at inlet and outlet etc. conforming to technical specification & as per following parameters. The chilled water pumps shall also include the cost of thermal insulation. Secondary chilled water pumps shall be suitable for operation on adjustable frequency drives & conforming to the specifications of variable speed pumping system.

-

-

-

... More
Capacity of Each Pump (LPM) 3775

-

-

-

... More
Pump Head (Mt) 33

-

-

-

... More
Pump Motor HP 50

-

-

-

... More
Minimum Efficiency 80 %

-

-

-

... More
Working + Standby 3+1

-

-

-

... More
Chilled Water Pump Sets (4W+2S) as mentioned above. The price quoted for supply, installation, testing & commissioning of imported Pumps shall be inclusive of all duties & taxes, insurance, transportation / shipment cost from works to site, loading / unloading, port clearance charges etc. as required in Indian Rupees.

6

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
VARIABLE SPEED PUMPING SYSTEM

-

-

-

... More
Supply, installation, testing and commissioning of Variable Speed Pumping system consisting of four numbers 50 HP adjustable frequency drive (AFD) suitably interfaced with other system components, hand / auto macro designed for pumping application, 01 no. dedicated microprocessor based pump logic controller, parallel pumping software duly downloaded, 02 No. Differential Pressure Sensor / Transmitters, interfacing amongst all components and compatibility of I/O signals etc. complete with other accessories as required.

-

-

-

... More
The price quoted for supply, installation, testing & commissioning shall be inclusive of all duties & taxes, insurance, transportation / shipment cost from works to site, loading / unloading, port clearance charges etc. as required in Indian Rupees. (For Chilled Water Secondary Pump & Condenser Water pump)

2

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
AIR SEPARATOR

-

-

-

... More
Supply Installation Testing and Commissioning of In-line Air & Dirt Separator. removing of free air, bubbles and microbubbles in combination with separation and removal of dirt particles within chilled water system. The acceptable design shall incorporate a separating element to force water into tranquillity zones for air and dirt removal. A nozzle shall force de-aerated water into the main flow to divert contaminated water through the separating element.The use of tube mesh and wire mesh made of copper or any metal is not permitted for separation purpose, wire mesh/tube increases the pressure drop and maintenance requirement. A high capacity, conical brass automatic air vent shall be installed on the top of the vessel for air discharge. Drain valve for removal of floating debris and dirt. Heavier than water dirt particles shall be removed via a blow down valve on the base of the vessel whilst ferrous particles down to 4 µm shall be captured by a magnetic device(25 Neodymium Supermagnets) in the lower part of the vessel. It shall be able to remove at least 15% of 70 µm microbubbles per cycle and at least 35% of 150 µm dirt particles per cycle. Manufactured and designed in accordance with European Pressure Equipment Directive PED 97/23/EC. Material shall be EN/ISO: S235JR+N. The Microbubble Air and Dirt Separator shall be sized appropriate to the maximum operating pressure of the system. Inlet and outlet of the unit (Dia-250 mm.) shall be via horizontally-opposed, coaxial flanged connections in accordance with EN 1092-1 PN 16. Suitable for glycol solution upto 50%, Temperature range -10 C to 120 C Line Size:250 mm diameter. Approved Makes : Flamco/IMI/Spirotech/Caleffi

-

-

-

... More
The price quoted for supply, installation, testing & commissioning shall be inclusive of all duties & taxes, insurance, transportation / shipment cost from works to site, loading / unloading, port clearance charges etc. as required in Indian Rupees.

1

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
FRP INDUCED DRAFT COOLING TOWER (500 TR)

-

-

-

... More
Supply, installation, testing and commissioning of FRP Induced draft, cross/counter flow, twin/four cell, direct/ gear driven, site erected cooling tower of capacity 500 TR (18,91,000 Kcal/Hr.) based on the parameters given below and complete with PVC Fill, Louvers, Drift Eliminator, TEFC Motor, Propeller Fan, PVC Sump & Steel Ladder etc. The cooling tower shall conform to technical specifications given in the tender. The maximum allowable sound power at a distance of 1 M from the cooling Tower shall be less than 75 dB. The cooling Tower Model shall be to suit site condition.

-

-

-

... More
Duty Parameters

-

-

-

... More
Capacity -500 TR (18,91,000 Kcal/Hr)

-

-

-

... More
Designed Wet Bulb Temperature - 28.3 °C

-

-

-

... More
Water Inlet Temperature - 37.77 °C

-

-

-

... More
Water Outlet Temperature - 32.22 °C

-

-

-

... More
The price quoted for supply, installation, testing & commissioning shall be inclusive of all duties & taxes, insurance, transportation / shipment cost from works to site, loading / unloading, etc. as required in Indian Rupees.

5

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
CONDENSER WATER PUMPS

-

-

-

... More
Supply, installation, testing and commissioning of Horizontal Split Casing condenser water centrifugal pump sets with bronze impeller for condenser water recirculation complete with TEFC Sq. Cage induction motor with class "F" insulation, base plate, coupling guard, vibration isolators, SS Shaft, factory fitted mechanical seal, flexible pipe connector at inlet and outlet etc. conforming to technical specification & as per following parameters: (4W+1S)

-

-

-

... More
Capacity of Each Pump LPM 4720

-

-

-

... More
Pump Head (Mt) 33.00

-

-

-

... More
Motor HP 60.0

-

-

-

... More
Minimum Efficiency 80 %

-

-

-

... More
The price quoted for supply, installation, testing & commissioning shall be inclusive of all duties & taxes, insurance, transportation / shipment cost from works to site, loading / unloading, etc. as required in Indian Rupees.

5

-

-

... More
PRESSURIZED EXPASNION TANK WITH BUILT-IN VACUUM DEGASSER

-

-

-

... More
Supply, installation, testing & commissioning of Pressurized Expansion Tank, Pressurization Unit with vacuum cylinder c/w break tank as detailed in specification. High and low pressure alarm setting shall be selectable by the user. Expansion and pressurization of the chilled water system to be provided by an integrated pump with pressurized expansion tank(s) for : Approximate system volume = 1,02,000 ltr at Max ambient temp 40 Deg C and Total Static height above the expansion tank 40 M. The whole system duly tested from factory conforming to international standards PED-97/23/EC, IEE, EMC-2004/108/EC, Machinery Directive 95/16/EC. System pressure shall be regulated within ± 0.2 bar (2.9 psi) of the set pressure. The system shall consist of following : 1) Pressurization Unit with vacuum degasser c/w Pumps,vacuum cylinder, Break tank, float valve, over flow connection, pressure sensor for system and for vacuum cylinder, solenoid valve, isolation Valve, NRV, Drain Valve, flood protection in the event of a serious leak, Pipe fittings c/w Controller & display, full unit duly tested, housed in a mild steel cabinet. 2) Pressurized Expansion Tank 1200 ltr made from top quality steel and finished with a gleaming red epoxy-powder coating c/w high quality butyl rubber removable bladder, Nitrogen filling for longer maintenance of pre pressurization. Expansion Tank shall have third party certificate (TUV / lloyds registered).Vessel 100-1000 liters :in accordance with EN13831/ 1200-8000 liters : in accordance with AD2000. 3) Controller : Controller for pressurization as well as vacuum degassing with IP 54 rating. bright LED display showing srolling messages and status of the main operating components, top up function, flood limiter/shut down function in event of serious leak. in case of any fault, controller shall display fault code and generate alarm Approved Makes : Flamco/IMI/Spirotech/Caleffi

-

-

-

... More
Capacity of the pressurised tank - 1200 Liters

-

-

-

... More
The price quoted for supply, installation, testing & commissioning shall be inclusive of all duties & taxes, insurance, transportation / shipment cost from works to site, loading / unloading, port clearance charges etc. as required in Indian Rupees.

1

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
SIDE STREAM FILTRATION SYSTEM

-

-

-

... More
Supply, Installation, testing and commissioning of SIDE STREAM FILTRATION SYSTEM to remove unwanted solids from Condenser loop using Lakos centrifugal-action Lakos vortex separator. Control of solids in the recirculated cooling water system shall be accomplished via a side-stream flow of 10-25% of the full-stream system flow through a completely assembled separation / filtration package. The package's pump shall provide sufficient pressure for the re-introduction of side-stream fluid back into system flow.The side stream filteration unit shall be of suitable for 380 USGPM flow rate and pressure drop of 0.2 - 0.8 Bar, Maximum working pressure of 10.3 Bar and Maximum operating temperature of 60 deg.C. The complete packaged unit shall consist of the following

-

-

-

... More
Pump

-

-

-

... More
End-suction, single stage; TEFC motor; iron / Bronze impeller; flooded suction required.

-

-

-

... More
Seperator

-

-

-

... More
Centrifugal-action accessible design, incorporating a true tangential inlet and mutually tangential Swirlex internal accelerating slots, employed to promote the proper velocity necessary for the removal of the separable solids. The internal accelerating slots shall be spiral-cut for optimum flow transfer, laminar action and particle influence into the separation barrel. Avoid Dome type or Dumbbell type of Separator construction to prevent the lack of internal method of acceleration & efficiency. The separator's internal vortex shall allow this process to occur without wear to the accelerating slots. Separated particle matter shall spiral downward along the perimeter of the inner separation barrel, in a manner which does not promote wear of the separation barrel, and into the solids collection chamber, located below the vortex deflector plate. The separator shall be of unishell construction with SA-36, SA-53B or equivalent quality carbon steel, minimum thickness of .25 inches (6.35 mm). Level of filtration & effectiveness must be as per given specification, Performance Testing must be done by an independent and identified testing laboratory for any of the separator.

-

-

-

... More
Automatic Purge Valve

-

-

-

... More
An electrically-actuated valve programmed at appropriate intervals and duration in order to efficiently and regularly purge solids from the separator's collection chamber.

-

-

-

... More
Electrical control

-

-

-

... More
Star Delta starter with overload module; HOA selector switch; re-set/disconnect/trip switch. Power requirement: 380/415 volt, 3 phase, 50 Hz.

-

-

-

... More
Skid Plate

-

-

-

... More
Steel, 3/16-inch (5 mm) minimum thickness or Steel Structural base Approved Make : Lakos/Towerflo/Towerscour

1

-

-

... More
HOT WATER GENERATOR

-

-

-

... More
Supply, installation, testing and commissioning of Hot Water Generator With VFD for Monsoon Reheat of capacity 150 KW in Suitable banks complete with controls, electrical panels etc. confirming to technical specifications Section.

-

-

-

... More
The hot water generator shall be Vertical / horizontal shell type. The shell shall be constructed out of 10mm thick Ms sheet and dishend shall be 12mm thick MS sheet with electric fusion welded seams & in accordance with ASME Boiler & Pressure Vessel Code, Section IV. Sheel and dish insulated with 100mm thick fiber glass of 32 kg/m3 density with 0.6mm aluminum sheet cladding.

-

-

-

... More
The shall be mounted in a cabinet made out 16G(1.6mm) Stainless Steel (SS-316) with Duly powder coated, complete with hinges, locks etc. to make a sturdy compact assembly. The cabinet shall be provided with sufficient ventilation of heaters terminals of the boiler. The angle iron frames shall be provided with lifting lugs & pedestals. Hot Water Generator shall be suitable for indoor/outdoor installation having degree of proctection IP55.

-

-

-

... More
Heating element sall be flanged Immersion heaters consiting of multiple tubler heating elements formed into hairpins that are brazed to a pressure rated flange. Electrical resistence type heating elements are capsulated in seamless copper U-tubes of thickness 1.2mm minumam. The electrical heater which shall be mounted within seamless copper sheethed electrically resistant U-Tubes, flange mounted with stainless steel studs. The heaters will be easily removable without opening of terminal plates. The heaters shall be suitable for 240±10%, 50±5% Hz, Single Phase AC supply and will be in direct contact with water contained in the shell.

-

-

-

... More
Microprocessor based step controller with thermister sensor to control the HWG in stages. Features of this control should include dip switch programming, status LED's.. Step controller shall have builtin test mode to verify Load wiring, contactors and stage operations with 1 Sec time delay. A separate power controller shall be provided for proportional control (0-100% load), in between the switching on and off of step control stages for precise temp. The HWG shall be BMS compatible and RS-485 Communication port shall be provided for remote programming and control.

-

-

-

... More
The hot water generator shall be tested in the factory at 250 PSI

-

-

-

... More
Inlet Water Temperature 44.44 °C (112°F)

-

-

-

... More
Outlet Water Temperature 54.44 °C (130°F)

-

-

-

... More
The price quoted for supply, installation, testing & commissioning shall be inclusive of all duties & taxes, insurance, transportation / shipment cost from works to site, loading / unloading, port clearance charges etc. as required in Indian Rupees. (2W+1S)

3

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
HOT WATER PUMPS

-

-

-

... More
Supply, installation, testing and commissioning of Monoblock hot water centrifugal pump sets with VFD.Pump Sets having bronze impeller for hot water recirculation complete with TEFC Sq. Cage induction motor with class "B" insulation, base plate, vibration isolators etc. conforming to techinical specification and as per following parameters. The hot water pumps shall include thermal insulation & cladding.

-

-

-

... More
Capacity of Each Pump LPM -310

-

-

-

... More
Pump Head (Mt) -25.0

-

-

-

... More
Motor HP -10 HP

-

-

-

... More
The price quoted for supply, installation, testing & commissioning shall be inclusive of all duties & taxes, insurance, transportation / shipment cost from works to site, loading / unloading, etc. as required in Indian Rupees. (2W+1S)

3

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
VARIABLE SPEED HYDROPNEUMATIC SYSTEM

-

-

-

... More
Supply, installation, testing and commissioning of variable speed (VSPS) hydropneumatics system mounted on a common base plate comprising of vertical centrifugal pumping set with S.S body, stainless steel impeller and mechanical seal, shaft directly coupled to a TEFC induction motor suitable for 400/440 volts, 3 phase, 50 cycles AC supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundation, one No. microprocessor based controller, dedicated variable frequency drive for each pump, one No.remote sensors, pressure transducers, sequence running controller, dry running Protection, motor control center, necessary power and control cabling from MCC to pumps including required rating of MCB, one No. 90 liter capacity M.S diaphragm tank with interchangeable butyl rubber membrane, complete in all respects including stainless steel grade 316 pipe suction and delivery headers and isolation/ control valves( ball valves/butterfly valves/ Nan return valves/ vibration eliminators etc. as required) , power box, equipped with fuses/ isolators/circuit breakers as required.

-

-

-

... More
Hyd. System for Soft Water Supply Pump (OPD BLOCK)

-

-

-

... More
Flow rate : 180.0 LPM each (4hr Working)

-

-

-

... More
Pumping Head - 60/65 m

-

-

-

... More
Approx. H.P. - 5 HP or as per manufacturer recommendation.

-

-

-

... More
1 Set = 3 Nos. pump (2 working+1 standby)

1

-

-

... More
Total Of AC Equipment High Side

-

-

-

... More
AIR HANDLING UNITS

-

-

-

... More
DOUBLE SKIN FLOOR MOUNTED AIR HANDLING UNIT WITH PRE-FILTER

-

-

-

... More
Supply, Installation, Testing and commissioning of factory built floor mounted chilled water double skin type horizontal/vertical air handling units made of 25mm thick panels consisting of pre plasticized G.I. casing of thickness 0.8mm outside layer and 0.8 mm inside layer with polyurethane foam (PUF) insulation factory injected between them by injection moulding machine, complete with blower section with blower suitable for static pressure as required, minimum 2 bend GSS/ PVC eliminators, cooling coil section with aluminium finned copper tubes (tubes thickness not less than 0.5mm) cooling coil of 4/6 row deep with 1.2mm thick Copper Header, filter section with 50mm thick metal viscous/ washable synthetic type air prefilters, belt drive package with TEFC drive motor of efficiency class IE3 suitable for 415 ± 10% volts, 50Hz, 3 Phase AC supply suitably designed for variable frequency drive applications, drain connections, stainless steel (18G) drain pan with PUF insulation, 150 mm dia. dial type pressure gauges (2 nos.)and industrial type thermometers (2 nos.) at the inlet and outlet of coil, auto purge valve wherever required, necessary vibration isolation arrangement etc. complete as per specification and of following capacities

-

-

-

... More
The cooling coil made of Aluminium finned Copper tube with coil section, pre-filter section with non woven synthetic media of 10 micron particle size with an efficiency of 90%, complete with motor, belt drive etc. without face and bypass dampers. The AHU panels shall be insulated with 25mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section with starter panel. The complete AHU shall conform to standard specification. The face velocity across cooling coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows:

-

-

-

... More
Chemical, Biological and Radiological (CBR) filtration with dia-electric media with efficency not less than 90 % of PM .1 micron alongwith 95 % of gases contamination removal with 350 mm depth (CBR- Certification IACS for filteration efficiency, Green Pro, ISO, FDA & RoHS - refer details specifcation for CBR Filter for compliance) in the AHU along with necessary frames, Air Decontamination Chamber in the supply air/ plenum comprising of nanoX coating plasmOX having EPA approved metallic compound of five metals targeted on Alumninum matrix cell duly enclosed by a poly quartz casing tube with the capability to produce ionized Hydroxyl oxidizers having required wattage for different CFM's. The Equipment shall a microbiological testing report against Bacteriophage (MS-2 FDA) surrogate SARS Cov-2 with a minimum efficiency of 99 percent along with a Virology report from ICMR approved lab with an minimum efficiency of 99 percent against SARS COV2 within 45 minutes

-

-

-

... More
5,000 CFM, 50 mm St. Pr., 6 Row CC

1

-

-

... More
6,000 CFM, 50 mm St. Pr., 6 Row CC

1

-

-

... More
7,000 CFM, 50 mm St. Pr., 4 Row CC

1

-

-

... More
8,000 CFM, 50 mm St. Pr., 4 Row CC

1

-

-

... More
9,000 CFM, 50 mm St. Pr., 4 Row CC

1

-

-

... More
10,000 CFM, 50 mm St. Pr., 4 Row CC

1

-

-

... More
11,000 CFM, 50 mm St. Pr., 4 Row CC

1

-

-

... More
12,000 CFM, 50 mm St. Pr., 4 Row CC

1

-

-

... More
12,000 CFM, 50 mm St. Pr., 6 Row CC

2

-

-

... More
14,000 CFM, 50 mm St. Pr., 4 Row CC

1

-

-

... More
14,000 CFM, 50 mm St. Pr., 6 Row CC

2

-

-

... More
15,000 CFM, 55 mm St. Pr., 4 Row CC

1

-

-

... More
15,000 CFM, 55 mm St. Pr., 6 Row CC

1

-

-

... More
16,000 CFM, 55 mm St. Pr., 4 Row CC

1

-

-

... More
16,000 CFM, 55 mm St. Pr., 6 Row CC

18

-

-

... More
17,000 CFM, 55 mm St. Pr., 6 Row CC

2

-

-

... More
18,000 CFM, 55 mm St. Pr., 6 Row CC

10

-

-

... More
20,000 CFM, 55 mm St. Pr., 6 Row CC

1

-

-

... More
21,000 CFM, 55 mm St. Pr., 6 Row CC

1

-

-

... More
22,000 CFM, 55 mm St. Pr., 6 Row CC

1

-

-

... More
24,000 CFM, 55 mm St. Pr., 6 Row CC

1

-

-

... More
DOUBLE SKIN FLOOR MOUNTED AIR HANDLING UNIT WITH FINE FILTER

-

-

-

... More
Supply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit floor mounted fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm Galvanised steel sheet inside with fan & fan section, fan motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 4/6 row cooling & 2 row heating coil made of Aluminium finned Copper tube, 1.2mm thick Copper header with coil section, pre-filter section with non woven synthetic media of 10 micron particle size with an efficiency of 90%, fine filter section with filters of non woven synthetic media of 5 micron particle size, polished stainless steel drain pan made out of 22 G sheet duly insulated complete with motor, belt drive package, guard etc. without face and bypass dampers. The AHU panels shall be insulated with 23mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only with starter panel. The complete AHU shall conform to standard specification. The face velocity across cooling / heating coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows:

-

-

-

... More
Chemical, Biological and Radiological (CBR) filtration with dia-electric media with efficency not less than 90 % of PM .1 micron alongwith 95 % of gases contamination removal with 350 mm depth (CBR- Certification IACS for filteration efficiency, Green Pro, ISO, FDA & RoHS - refer details specifcation for CBR Filter for compliance) in the AHU along with necessary frames, Air Decontamination Chamber in the supply air/ plenum comprising of nanoX coating plasmOX having EPA approved metallic compound of five metals targeted on Alumninum matrix cell duly enclosed by a poly quartz casing tube with the capability to produce ionized Hydroxyl oxidizers having required wattage for different CFM's. The Equipment shall a microbiological testing report against Bacteriophage (MS-2 FDA) surrogate SARS Cov-2 with a minimum efficiency of 99 percent along with a Virology report from ICMR approved lab with an minimum efficiency of 99 percent against SARS COV2 within 45 minutes

-

-

-

... More
2,500 CFM, 50 mm St. Pr., 6 Row CC, 2 Row HC

2

-

-

... More
6,000 CFM, 50 mm St. Pr., 6 Row CC, 2 Row HC

1

-

-

... More
7,000 CFM, 50 mm St. Pr., 6 Row CC, 2 Row HC

1

-

-

... More
9,000 CFM, 65 mm St. Pr., 6 Row CC, 2Row HC

1

-

-

... More
14,000 CFM, 65 mm St. Pr., 6 Row CC, 2 Row HC

1

-

-

... More
15,000 CFM, 65 mm St. Pr., 6 Row CC, 2 Row HC

1

-

-

... More
DOUBLE SKIN FLOOR MOUNTED AIR HANDLING UNIT WITH HEPA FILTER

-

-

-

... More
(For OT With 10 ACPH/Hr)

-

-

-

... More
Supply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit floor mounted fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm polished SS sheet inside with backward curved fan in supply and forward curved in exhaust with fan section and fan motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 8 row cooling & 2 row heating coil made of Aluminium finned Copper tube, 1.2mm thick Copper header with coil section, pre-filter section with non woven synthetic media of 10 micron particle size with an efficiency of 90% in both the supply & exhaust side of AHU, fine filter section with filters of non woven synthetic media of 5 micron particle size in supply after fan, (Hepa filters shall be at terminals along with laminar flow plenum & not to be included in the cost), mixing chamber, polished stainless steel drain pan made out of 22 G sheet duly insulated complete with motor, belt drive package, guard etc. without face and bypass dampers. The AHU panels shall be insulated with 48mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only with starter panel. These AHUs shall have air inlet / outlet connection made of aluminium 20 G & all fixing arrangement / blank off shall be of SS The complete AHU shall conform to standard specification. The face velocity across cooling / heating coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows:

-

-

-

... More
3000 CFM Supply Air, 8 Row CC, 2 Row HC, 125 mm St. Pr., For Supply Fan, Supply Fan, 1000 CFM Ex. Air Blower, 40 mm St. Pr. for Exhaust fan with other accessories as specified)

1

-

-

... More
DOUBLE SKIN CEILING SUSPENDED AHU

-

-

-

... More
Supply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit ceiling suspended type fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside with blower, blower section and blower motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 4 Row cooling coil made of Aluminium finned Copper tube with coil section and 1.2mm thick copper Header, pre-filter section with non woven synthetic media of 10 micron particle size with an efficiency of 90%, polished stainless steel drain pan made out of 22 G sheet duly insulated complete with motor, direct / belt drive as mentioned below etc. without face and bypass dampers. All direct driven fan motor shall be sourced from fan manufacturer & factory fitted only. The AHU panels shall be insulated with 23mm thick & 36 Kg/m³ density PU foam. The motor & blower assembly shall be mounted on Aluminium extruded section only with starter panel. The complete AHU shall conform to standard specification. The face velocity across cooling coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows:

-

-

-

... More
Chemical, Biological and Radiological (CBR) filtration with dia-electric media with efficency not less than 90 % of PM .1 micron alongwith 95 % of gases contamination removal with 350 mm depth (CBR- Certification IACS for filteration efficiency, Green Pro, ISO, FDA & RoHS - refer details specifcation for CBR Filter for compliance) in the AHU along with necessary frames, Air Decontamination Chamber in the supply air/ plenum comprising of nanoX coating plasmOX having EPA approved metallic compound of five metals targeted on Alumninum matrix cell duly enclosed by a poly quartz casing tube with the capability to produce ionized Hydroxyl oxidizers having required wattage for different CFM's. The Equipment shall a microbiological testing report against Bacteriophage (MS-2 FDA) surrogate SARS Cov-2 with a minimum efficiency of 99 percent along with a Virology report from ICMR approved lab with an minimum efficiency of 99 percent against SARS COV2 within 45 minutes

-

-

-

... More
1,500 CFM, 32 mm St. Pr., 4 Row CC

1

-

-

... More
1,500 CFM, 35 mm St. Pr., 6 Row CC

1

-

-

... More
2,000 CFM, 32 mm St. Pr., 4 Row CC

1

-

-

... More
2,000 CFM, 35 mm St. Pr., 6 Row CC

1

-

-

... More
2,500 CFM, 32 mm St. Pr., 4 Row CC

6

-

-

... More
3,000 CFM, 35 mm St. Pr., 4 Row CC

1

-

-

... More
3,500 CFM, 35 mm St. Pr., 4 Row CC

1

-

-

... More
4,000 CFM, 35 mm St. Pr., 4 Row CC

1

-

-

... More
4,500 CFM, 35 mm St. Pr., 4 Row CC

1

-

-

... More
5,000 CFM, 35 mm St. Pr., 6 Row CC

2

-

-

... More
6,000 CFM, 35 mm St. Pr., 6 Row CC

2

-

-

... More
FAN COIL UNIT (FCU)

-

-

-

... More
Supply, installation, testing and commissioning of GI powder coated fan coil units complete with fan, 3 speed motor, 4 row deep cooling coil, aluminium filters with filter box, double sandwiched insulated tray, ball valve with strainer, copper connection, rotary switch, supporting arrangement, electrical wiring etc. The fan shall be selected for 16 mm static pressure. The complete fan coil unit shall have acoustically lined casing & shall be in line with the standard specification. The capacity of fan coil units shall be as follows:

-

-

-

... More
1.0 TR (400 CFM)

30

-

-

... More
1.5 TR (600 CFM)

170

-

-

... More
2.0 TR (800 CFM)

15

-

-

... More
3.0 TR (1200 CFM)

25

-

-

... More
THERMOSTAT FOR AHU & FCU

-

-

-

... More
THERMOSTAT FOR AHU

-

-

-

... More
Supply, installation, testing and commissioning of digital display type thermostat for air handling unit for cool / heat application suitable for four pipe system & humidistat suitable for working with humidifier and hot water coil control valves for various air handling Units.Controller have provision to display differential pressure accress OT if required. The thermostat shall have provision of setting of space temperature and display of the same.

-

-

-

... More
The humidistat shall have provision of setting space RH and display of the same. The quoted price of thermostat / humidistat shall include the cost of 20mm MS conduits, control cabling, MS Box etc as required. The cost quoted shall be excluding the control valves and humidifier

-

-

-

... More
Cooling / heating Digital display type common thermostat & humidistat to be installed in OT & shall have temperature & RH setting control from OT as & when required.

1

-

-

... More
Cooling / heating thermostat for balance AHU

78

-

-

... More
Snap Acting Humidistat at air-handler.

1

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
THERMOSTAT FOR FCU

-

-

-

... More
Supply, installation, testing and commissioning of automatic control for Fan Coil Units consisting of pressure independent balancing cum two way control valve (already quantified above) & digital thermostat, which will have provision of setting of room temperature, setting of fan speed (High, Medium, Low) and shall display the inside RH.

240

-

-

... More
HUMIDIFICATION PACKAGE

-

-

-

... More
Supply, installation, testing and commissioning of Humidification package with all necessary controls as required as per standard specification & of following capacities:

-

-

-

... More
3.0 KW

1

-

-

... More
LAMINAR AIR FLOW

-

-

-

... More
Supply, installation & testing of factory fabricated Laminar air flow pattern perforated plenum made of 16 G aluminium sheet with hepa filters & suitable for operation theatre with all accessories as required to suit, site condition as per specifications.

-

-

-

... More
SIZE-2.4mx2.4m

1

-

-

... More
AIR OZONE SYSTEMS

-

-

-

... More
Supply, installation, testing, commissioning and handing over the air ozone systems for maintaining indoor air quality. The components of the system must be in strict conformity with the technical specifications. The price to include all connected wiring between the duct mounted ozone generator, VOC sensor / controller. The single phase power supply to the ozone generator / monitor shall be provided near the controllers. Common area ceiling hung AHU shall not have this facility.

-

-

-

... More
The price quoted for supply, installation, testing & commissioning shall be inclusive of all duties & taxes, insurance, transportation / shipment cost from works to site, loading / unloading, port clearance charges etc. as required in Indian Rupees.

-

-

-

... More
Ozone Generator With Sensor & VOC Controller

1

-

-

... More
ULTRA VOILET GERMICIDAL IRRADIATION SYSTEM (UVGI )

-

-

-

... More
Supply, Installation , testing , commissioning and handing over of the Ultra Violet Germicidal Irradiations (UVGI) System for maintaining indoor Air Quality. The components of the system must be in strict conformity with the specifications. And shall be including freight from works to site ,Insurance,Lifting,Shifting etc.as required . Single phase power supply for the UVGI will be provided by others. The prices to include all inter connected wiring between the UVGI Lamps. For Detail please refer the Basis of Design For Selection.

7

-

-

... More
DBD Bi Polar Ionization

-

-

-

... More
Supply, installation, testing & commissioning of Dielectric Barrier Discharge (DBD) Bi-Polar Ionization System to remove the odour, VOCs, Molds, Viruses, Bacteria's, Pathogens, PMs . Bipolar ionization system must have compliances to below reference codes and standards : 1.UL 2998 Ozone Free Compliance 2. UL 867-2013 Ozone Standard for Electrostatic Air Cleaners including ozone chamber test 3. IP66 Enclosures 4. UL 1995 Heating and Cooling Equipment. 5. UL 2043 Standard for Fire Test for Heat and Visible Smoke Release for Discrete Products and Their Accessories Installed in Air-Handling Spaces. 6. OPA 2807-10, OPA 2808-10 7. ASHRAE 62.1

1

-

-

... More
The bipolar ionization air purifiers shall have been independently tested by a third-party to ANSI/AHAM AC-1-2002 and provide a minimum Clean Air Delivery Rate (CADR) performance of 125 Dust CADR and 190 Mold CADR. Any bipolar ionization system not tested or rated above a 100 CADR is not allowed. Bipolar ionization manufacturer must have third party laboratory testing results proving contaminant and pathogens reductions against COVID thru ASTM Test Method( 99.9% efficiency), VOCs and TVOC (90% efficiency), MS2 (95% efficiency), Staph (95% efficiency), E. Coli (95% efficiency), Dust-Particulate Matter 0.3 (86% efficiency), Mold (90% efficiency), and C. Dificile (95% efficiency). Manufacturer shall furnish these reports on request. Ionization tubes must be constructed from durable, shatterproof composite material, not glass. Composite tubes must be able to last for 17,600 hours or more. Glass tubes are not be permitted due to potential of shatter caused by vibration. Tube must retain 90% of ion output efficiency at 17,600 hour mark. The units to be as per as per Specification for all re-circulating systems of following capacity of units as mentioned below.

-

-

-

... More
VARIABLE AIR VOLUME (VAV) BOX

-

-

-

... More
Supply, installation, testing, and commissioning of pressure independent VAV boxes for cooling / heating application including 220 / 24 V transformers, wiring between transformers, temperature sensors for VAV box suitable for following air Quantity (CFM)

-

-

-

... More
1000 to 1200 CFM

2

-

-

... More
1201 to 1500 CFM

4

-

-

... More
1501 to 1800 CFM

5

-

-

... More
1801 to 2200 CFM

6

-

-

... More
2201 to 2700 CFM

6

-

-

... More
2701 to 3200 CFM

3

-

-

... More
3201 to 3600 CFM

2

-

-

... More
3601 to 4000 CFM

2

-

-

... More
VARIABLE AIR VOLUME (VAV) Diffusers

-

-

-

... More
Supply, Installation, Testing & Commission of 4-way Analog Type variable geometry VAV Diffuser (electronically Controlled) complete with Vary-Drive actuator, housing & appearance panel as per specifications.

2

-

-

... More
Wall mounted Thermostat Unit

4

-

-

... More
USB – Commissioning Module with cable

1

-

-

... More
Power Module Unit

1

-

-

... More
AIR COOLED SPLIT TYPE SPLIT UNITS AIR-CONDITIONER

-

-

-

... More
Supplying, installing, testing and commissioning of Air Cooled Invertor Split type wall mounted /Ceiling suspended 5 Star Air conditioners suitable for R410A or eco-friendly refrigerant with evaporating unit comprising of cooling coil, blower with motor in Metallic (Steel) casing and condensing unit comprising hermetically sealed scroll compressor, condenser coil, and propeller fan. Unit shall be complete with controls, interconnecting copper refrigerant piping with insulation, drain pipes and electrical cabling etc. between evaporative and condensing unit, refrigerant gas and oil and complete as per specifications. The unit shall be suitable for operating on 240 volt, 1 phase, 50 Hz AC supply with five star energy rating. The units shall be suitable for chorded remote operation. The refrigerant piping & cabling shall run in PVC sleeve Steel supporting structure for outdoor units suitable for wall mounting / floor mounting. Nothing extra shall be paid on any account i.e. refrigerant pipes, drain pipes etc.

-

-

-

... More
Providing, fixing and testing of copper refrigerant piping of appropriate sizes duly insulated with nitrile rubber insulation of 19 mm thickness and cabling for all types of split AC units. The pipes plus nitrile rubber insulation and cable are to be covered with PVC flexible conduits for protection.

-

-

-

... More
Note: Providing and fixing of Powder coated M.S. angle iron frame work for outdoor unit is also included in the above scope. Contractor to submit design/Scheme for Iron frame and obtain approval of engineer/employer before proceeding purchase & installation.

-

-

-

... More
Capacity : 1.5 TR 5 Star Split AC Inverter Type IS 1391 Part-II

15

-

-

... More
Capacity : 1.5 TR 5 Star Split AC Inverter Type IS 1391 Part-II

10

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
Refrigerant Piping

-

-

-

... More
Copper Tube of Size-6.4mm for Split Unit AC 1/1.5/2/3 TR Capacity

150

-

-

... More
Copper Tube of Size-9.5mm for Split Unit AC 1/1.5/2/3 TR Capacity

100

-

-

... More
Copper Tube of Size-12.7mm for Split Unit AC 1/1.5/2/3 TR Capacity

150

-

-

... More
Copper Tube of Size-15.9mm for Split Unit AC 1/1.5/2/3 TR Capacity

100

-

-

... More
Automatic Voltage Stablizer

-

-

-

... More
4KVA Wall Mounted Automatic Voltage Stablizer from Range 140V to 280V

25

-

-

... More
5KVA Wall Mounted Automatic Voltage Stablizer from Range 140V to 280V

1

-

-

... More
Drain Pipe

-

-

-

... More
Drain Pipe for AC

310

-

-

... More
SCHEDULED TIMER FOR SPLIT AC

-

-

-

... More
Supply, installation, testing and commissioning of Scheduled Timer for wall mounted split type Air conditioning units.

8

-

-

... More
Air Cooled Ductable Unit

-

-

-

... More
Supplying, installing, testing and commissioning of Air Cooled Ducted Air conditioners suitable for R410A or eco-friendly refrigerant with evaporating unit comprising of cooling coil, blower with motor in Metallic (Steel) casing and condensing unit comprising hermetically sealed scroll compressor, condenser coil, and propeller fan. Unit shall be complete with controls, interconnecting copper refrigerant piping with insulation, Expansion kit to connect with DX AHU, and electrical cabling etc. between evaporative and condensing unit, refrigerant gas and oil and complete as per specifications. The unit shall be suitable for operating on 240 volt, 1 phase, 50 Hz AC supply with five star energy rating. The units shall be suitable for chorded remote operation. The refrigerant piping & cabling shall run in PVC sleeve Steel supporting structure for outdoor units suitable for wall mounting / floor mounting.

-

-

-

... More
Providing, fixing and testing of copper refrigerant piping of appropriate sizes duly insulated with nitrile rubber insulation of 19 mm thickness. The pipes plus nitrile rubber insulation and cable are to be covered with PVC flexible conduits for protection.

-

-

-

... More
Note: Providing and fixing of Powder coated M.S. angle iron frame work/Masonry Pedestal with required anti-vibration mounting for outdoor unit is also included in the above scope. Contractor to submit design/Scheme for Iron frame and obtain approval of engineer/employer before proceeding purchase & installation.

-

-

-

... More
Nitrogen pressure testing for refrigerant pipe leakages & flushing during installation & after commissioning between IDU & ODU with flare nuts. Refrigerant gas & oil charging as per OEM standard.

-

-

-

... More
Necessary corrosive treatment of copper coil of the ODU with Aluminium hydroxide, 25 microns thickness or equivalent coating as per manufacturer standard to protect from corrosion, sulphur and other chemical contaminants present in the air. The coating should be done in the presence of OEM representative. The coating shall be carried-out by the authorized applicator of coating manufacturer.

-

-

-

... More
4.0 TR (1600 CFM) Ductable Split Unit

1

-

-

... More
5.5 TR (2200 CFM) Ductable Split Unit

1

-

-

... More
8.5 TR (3400 CFM) Ductable Split Unit

1

-

-

... More
11.0 TR (4400 CFM) Ductable Split Unit

1

-

-

... More
AIR COOLED PRECISION AIR-CONDITIONER

-

-

-

... More
Supplying, installing, testing and commissioning of micro-processor controlled Air Cooled Precision Air conditioners suitable for R410A or eco-friendly refrigerant with evaporating unit comprising of cooling coil, blower with motor in Metallic (Steel) casing and condensing unit comprising hermetically sealed scroll compressor, condenser coil, and propeller fan. Unit shall be complete with steam humidifier, necessary measuring controls, interconnecting copper refrigerant piping with insulation, drain pipes and electrical cabling etc. between evaporative and condensing unit, refrigerant gas and oil and complete as per specifications. The unit shall be suitable for operating on 240 volt, 1 phase, 50 Hz AC supply with five star energy rating. The units shall be suitable for chorded remote operation. Nothing extra shall be paid on any account i.e. refrigerant pipes, drain pipes etc.

-

-

-

... More
Providing, fixing and testing of copper refrigerant piping of appropriate sizes duly insulated with nitrile rubber insulation of 19 mm thickness and cabling for all types of Air Cooled Precision Air conditioners. The pipes plus nitrile rubber insulation and cable are to be covered with PVC flexible conduits for protection.

-

-

-

... More
Note: Providing and fixing of Powder coated M.S. angle iron frame work for outdoor unit is also included in the above scope. Contractor to submit design/Scheme for Iron frame and obtain approval of engineer/employer before proceeding purchase & installation.

-

-

-

... More
Capacity : 2.0 TR (1000 CFM)

2

-

-

... More
Capacity : 3.0 TR (1500 CFM)

1

-

-

... More
Capacity : 4.0 TR (2000 CFM)

1

-

-

... More
VENTILATIONS FANS

-

-

-

... More
AXIAL FLOW FANS (SMOKE EXTRACTION/EXHAUST FAN)

-

-

-

... More
Supply, installation testing & commissioning of Fire Rated direct driven Axial flow fan. Each fan shall be complete with casing made from mild steel duly enamel painted, adjustable pitch die cast aluminum impeller (HUB & BLADES), mounting clits, structural frame with blank-off sheet, anchor fastener with vibration isolation Springs, back draft damper(wherever required), bird screen at one sides (entry for supply air and exit for exhaust air) and rated Motor with class-H insulation. Motor shall be suitable for 415+10% volts, 50 cycles , 3 phase AC supply. with starter panel.

-

-

-

... More
Fan and motor shall be fire rated to 250 Deg C for 2 hours or as indicated in the specifications

-

-

-

... More
Back draft Damper : Where required for system design roof-mounted fan shall be equipped with a rattle-free back draft damper to prevent air from re­ entering the fan when fan is not in operation, thus sealing completely in closed position. Damper shall be chatter proof under all conditions.

-

-

-

... More
Note: Contractor Has to take approval on computer generated selection charts and fan curves showing power input and fan motor etc. prior to order the fans,(a) Noise level @ 3m from Fan shall be less than 78 dBA. with starter panel

-

-

-

... More
Note:-These fans would be connected to the fire alarm system & BMS system of the building and would start automatically in case of Fire

-

-

-

... More
Note

-

-

-

... More
1. Outlet Velocity for normal mode fans not to exceed 10.0 MPS(Meter/Second)

-

-

-

... More
2. Outlet Velocity for Fire mode fans not to exceed 12.0 MPS (Meter/Second)

-

-

-

... More
3. Fan motor shall meet IE3 or above standard as per IS-12615

-

-

-

... More
4. Static pressure and Motor Rating : The Indicated static pressure and motor rating is only provisional. Vendor to calculate static pressure based on drawings and pressure drop of finalized Equipment and submit for approval. The procurement shall be processed only after duly approval of calculation and selection from the Project Manager. Sound attenuator shall be as specified with following characteristics:

-

-

-

... More
5. Thickness of casing : for dia( 315-630 )mm - 2mm , dia ( 710-1120)mm - 3mm , dia (1250-1400)mm - 4mm & dia 1600mm - 5mm.

-

-

-

... More
6. In case of attenuator , calculation of reduction of sound level with insertion loss of attenuator is to be submitted.

-

-

-

... More
Capacity 2000 CFM, SP 15 mm wg

1

-

-

... More
Capacity 3000 CFM, SP 15 mm wg

1

-

-

... More
Capacity 5000 CFM, SP 20 mm wg

1

-

-

... More
Capacity 6000 CFM, SP 20 mm wg

2

-

-

... More
Capacity 8000 CFM, SP 20 mm wg

1

-

-

... More
Capacity 9000 CFM, SP 20 mm wg

1

-

-

... More
Capacity 10,000 CFM, SP 25 mm wg

16

-

-

... More
Capacity 15,000 CFM, SP 30 mm wg

14

-

-

... More
Capacity 16,000 CFM, SP 30 mm wg

8

-

-

... More
Capacity 18,000 CFM, SP 30 mm wg

12

-

-

... More
Capacity 20,000 CFM, SP 30 mm wg

10

-

-

... More
Capacity 25,000 CFM, SP 40 mm wg

1

-

-

... More
Capacity 30,000 CFM, SP 40 mm wg

2

-

-

... More
Capacity 32,000 CFM, SP 40 mm wg

2

-

-

... More
Capacity 34,000 CFM, SP 40 mm wg

2

-

-

... More
AXIAL FLOW FANS (SUPPLY/PRESSURISATION FAN)

-

-

-

... More
Supply, installation testing & commissioning of direct driven Axial flow fan. Each fan shall be complete with casing made from mild steel duly enamel painted, adjustable pitch die cast aluminum impeller (HUB & BLADES), mounting clits, structural frame with blank-off sheet, anchor fastener with vibration isolation Springs, back draft damper (wherever required) bird screen at both sides and rated Motor with class-F insulation. Motor shall be suitable for 415+10% volts, 50 cycles , 3 phase AC supply with starter panel.

-

-

-

... More
Back draft Damper : Where required for system design roof-mounted fan shall be equipped with a rattle-free back draft damper to prevent air from re­ entering the fan when fan is not in operation, thus sealing completely in closed position. Damper shall be chatter proof under all conditions.

-

-

-

... More
Note: Contractor Has to take approval on computer generated selection charts and fan curves showing power input and fan motor etc. prior to order the fans,(a) Noise level @ 3m from Fan shall be less than 78 dBA. with starter panel

-

-

-

... More
Note:-These fans would be connected to the fire alarm system & BMS System of the building and would start automatically in case of Fire

-

-

-

... More
Note

-

-

-

... More
1. Outlet Velocity for normal mode fans not to exceed 10.0 MPS(Meter/Second)

-

-

-

... More
2. Outlet Velocity for Fire mode fans not to exceed 12.0 MPS (Meter/Second)

-

-

-

... More
3. Fan motor shall meet IE3 or above standard as per IS-12615

-

-

-

... More
4. Static pressure and Motor Rating : The Indicated static pressure and motor rating is only provisional. Vendor to calculate static pressure based on drawings and pressure drop of finalized Equipment and submit for approval. The procurement shall be processed only after duly approval of calculation and selection from the Project Manager. Sound attenuator shall be as specified with following characteristics:

-

-

-

... More
5. Thickness of casing : for dia( 315-630 )mm - 2mm , dia ( 710-1120)mm - 3mm , dia (1250-1400)mm - 4mm & dia 1600mm - 5mm.

-

-

-

... More
6. In case of attenuator , calculation of reduction of sound level with insertion loss of attenuator is to be submitted.

-

-

-

... More
Supply Fan

-

-

-

... More
Capacity 2000 CFM, SP 15 mm wg

1

-

-

... More
Capacity 3000 CFM, SP 15 mm wg

1

-

-

... More
Capacity 5000 CFM, SP 20 mm wg

1

-

-

... More
Capacity 6000 CFM, SP 20 mm wg

3

-

-

... More
Capacity 8000 CFM, SP 20 mm wg

1

-

-

... More
Capacity 9000 CFM, SP 20 mm wg

1

-

-

... More
Capacity 10,000 CFM, SP 25 mm wg

16

-

-

... More
Capacity 11,000 CFM, SP 25 mm wg

4

-

-

... More
Capacity 12,000 CFM, SP 25 mm wg

8

-

-

... More
Capacity 14,000 CFM, SP 25 mm wg

1

-

-

... More
Capacity 15,000 CFM, SP 30 mm wg

16

-

-

... More
Capacity 16,000 CFM, SP 30 mm wg

10

-

-

... More
Capacity 18,000 CFM, SP 30 mm wg

18

-

-

... More
Capacity 20,000 CFM, SP 30 mm wg

4

-

-

... More
Capacity 25,000 CFM, SP 30 mm wg

1

-

-

... More
Capacity 30,000 CFM, SP 40 mm wg

2

-

-

... More
Capacity 32,000 CFM, SP 40 mm wg

1

-

-

... More
Capacity 34,000 CFM, SP 40 mm wg

1

-

-

... More
Capacity 37,000 CFM, SP 40 mm wg

4

-

-

... More
ROOF MOUNTED FAN (SMOKE EXTRACT/FRESH AIR )

-

-

-

... More
Supply, installation testing & commissioning of Roof mounted smoke extract /Fresh Air fan shall be vertical discharge type, direct driven as shown on drawing and required to meet system design requirement., complete with impeller , motor and weather proof aluminum housing Roof mounted smoke fans should be able to withstand the temperature of 250deg C/2hr with starter panel. The certifications should be in accordance with UL standards and as per specifications. Structural frame with blank-off sheet, anchor fastener with vibration isolation Springs.

-

-

-

... More
a. Housing: shall be constructed of 16 gauge steel sheet. The housing shall have an adjustable flange to facilitate installation and shall be especially adapted to receive fan, motor, and drive. The, motor shall be installed in ventilated water proof housing outside the air stream. The discharge cowl shall be hinged along one edge for easy access to motor and drive, for inspection and maintenance. The entire assembly shall be weatherproof and raised from the roof terrace sufficiently to prevent down flow of rain water accumulated on the terrace. 18 gauge galvanized steel mesh bird screen shall be provided on all discharge cowls around the outlet area.

-

-

-

... More
b. Fans : shall be propeller type as required, designed for maximum efficiency, minimum turbulence and quiet operation. Fan shall be statically and dynamically balanced.

-

-

-

... More
c. Motor : shall be energy efficient IE 3 ( as per IS 12615) squirrel-cage, totally- enclosed, fan cooled, standard frame, constant speed, continuous duty, single winding, suitable for 415±10% volts, 50 cycles, 3 phase AC power supply, provided with class `F’ insulation. designed for quiet operation and IE3 efficient. Bearings shall be designed for vertical mounting. Motor name-plate horse-power shall be such that the motor shall not be overloaded in the entire range of rated speed. Motor and fan assembly shall be easily removable. Motor power supply characteristic and maximum speed shall be as specified for propeller fans with starter panel.

-

-

-

... More
d. Fan Bearings : shall be heavy duty, self-aligning sleeve/ball bearings designed for thrust load and sealed for grease retention.

-

-

-

... More
e. Back draft Damper : Where required for system design roof-mounted fan shall be equipped with a rattle-free back draft damper to prevent air from re­ entering the fan when fan is not in operation, thus sealing completely in closed position. Damper shall be chatter proof under all conditions.

-

-

-

... More
f. Vibration Isolation :The motor and fan assembly shall be isolated from the base with vibration isolators.

-

-

-

... More
Noise level shall be 80 dBA @ 1m Distance.

-

-

-

... More
Note:-These fans would be connected to the fire alarm system & BMS System of the building and would start automatically in case of Fire

-

-

-

... More
Capacity 5000 CFM, SP 25 mm wg

1

-

-

... More
Capacity 6000 CFM, SP 25 mm wg

1

-

-

... More
CABINET TYPE CENTRIFUGAL FAN :

-

-

-

... More
Supply, installation, testing, commissioning of direct driven double skin Cabinet type centrifugal fan with 25mm thick PUF insulation fan section consist of Centrifugal Fan, forward curve, with radial tip double wheel, double inlet, consisting of motor, drive arrangement, aluminum common frame for fan and motor, cushy foot mounting, aluminum base frame for the unit, VCD on the outlet of fan, filter and accessories as per specification and drawing complete with 25mm thick five layer GI wire mesh filter, Structural frame with blank-off sheet, anchor fastener with vibration isolation Springs and starter panel.

-

-

-

... More
Motor: Fan motor shall be energy efficient and suitable for 415±10% volts, 50 cycles, 3 phase AC power supply, squirrel-cage, totally enclosed, fan-cooled motor, provided with class F insulation, and of approved make. Motor name plate horsepower shall exceed brake horsepower by a minimum of 10%. Motor shall be designed especially for quiet operation and motor speed shall not exceed 1440 rpm. The fan and motor combination selected for the required performance shall be of the most efficient (smallest horsepower), so that sound level is lowest. Motor shall have a minimum efficiency of IE3 or as per relevant BIS/NEMA codes.

-

-

-

... More
The motor shall be spark-proof. The starter panel shall be provided with in-built timer to switch OFF the fan after a preset time (say 300 seconds) once triggered

-

-

-

... More
The cost include with approximate 10 RM suitable cabling between starter & unit.

-

-

-

... More
Note:-These fans would be connected to the fire alarm system/BMS System of the building and would start automatically in case of Fire

-

-

-

... More
Note

-

-

-

... More
1. Outlet Velocity for normal mode fans not to exceed 10.0 MPS(Meter/Second)

-

-

-

... More
2. Outlet Velocity for Fire mode fans not to exceed 12.0 MPS (Meter/Second)

-

-

-

... More
3. Static pressure and Motor Rating : The Indicated static pressure and motor rating is only provisional. Vendor to calculate static pressure based on drawings and pressure drop of finalized Equipment and submit for approval. The procurement shall be processed only after duly approval of calculation and selection from the Project Manager. Sound attenuator shall be as specified with following characteristics:

-

-

-

... More
600 CFM with 10 mm static Pressure (Flame Proof)

1

-

-

... More
6000 CFM with 35 mm static Pressure

1

-

-

... More
8000 CFM with 35 mm static Pressure

1

-

-

... More
9000 CFM with 35 mm static Pressure

1

-

-

... More
10000 CFM with 35 mm static Pressure

2

-

-

... More
12000 CFM with 35 mm static Pressure

2

-

-

... More
18000 CFM with 35 mm static Pressure

1

-

-

... More
20000 CFM with 35 mm static Pressure

1

-

-

... More
CABINET TYPE (Fire Rated) :

-

-

-

... More
Supply, installation, testing, commissioning of direct driven double skin Cabinet type centrifugal fan with 25mm thick PUF insulation fan section consist of Centrifugal Fan, forward curve, with radial tip double wheel, double inlet, consisting of motor, drive arrangement, aluminum common frame for fan and motor, cushy foot mounting, aluminum base frame for the unit, VCD on the outlet of fan, filter and accessories as per specification and drawing complete with 25mm thick five layer GI wire mesh filter, Structural frame with blank-off sheet, anchor fastener with vibration isolation Springs and starter panel.

-

-

-

... More
Motor: Fan motor shall be energy efficient and suitable for 415±10% volts, 50 cycles, 3 phase AC power supply, squirrel-cage, totally enclosed, fan-cooled motor, provided with class H insulation, and of approved make. Motor name plate horsepower shall exceed brake horsepower by a minimum of 10%. Motor shall be designed especially for quiet operation and motor speed shall not exceed 1440 rpm. The fan and motor combination selected for the required performance shall be of the most efficient (smallest horsepower), so that sound level is lowest. Motor shall have a minimum efficiency of IE3 or as per relevant BIS/NEMA codes.

-

-

-

... More
The motor shall be spark-proof. The starter panel shall be provided with in-built timer to switch OFF the fan after a preset time (say 300 seconds) once triggered

-

-

-

... More
Fan and motor shall be fire rated to 250 Deg C for 2 hours or as indicated in the specifications

-

-

-

... More
Note:-These fans would be connected to the fire alarm system/BMS System of the building and would start automatically in case of Fire

-

-

-

... More
Note

-

-

-

... More
1. Outlet Velocity for normal mode fans not to exceed 10.0 MPS(Meter/Second)

-

-

-

... More
2. Outlet Velocity for Fire mode fans not to exceed 12.0 MPS (Meter/Second)

-

-

-

... More
3. Static pressure and Motor Rating : The Indicated static pressure and motor rating is only provisional. Vendor to calculate static pressure based on drawings and pressure drop of finalized Equipment and submit for approval. The procurement shall be processed only after duly approval of calculation and selection from the Project Manager. Sound attenuator shall be as specified with following characteristics:

-

-

-

... More
600 CFM with 10 mm static Pressure

1

-

-

... More
20000 CFM with 35 mm static Pressure

1

-

-

... More
INLINE FAN (Ceiling suspended)

-

-

-

... More
Supply, installation, testing, commissioning of Inline fan with vibration isolators & speed regulator, complete as per specification and drawing. The Motor shall be suitable to run on 1 phase/50 hz/ 220 v electrical power.

-

-

-

... More
200 CFM with 10 mm static Pressure

4

-

-

... More
300 CFM with 10 mm static Pressure

2

-

-

... More
400 CFM with 10 mm static Pressure

4

-

-

... More
500 CFM with 12 mm static Pressure

2

-

-

... More
600 CFM with 12 mm static Pressure

2

-

-

... More
700 CFM with 12 mm static Pressure

1

-

-

... More
800 CFM with 12 mm static Pressure

1

-

-

... More
900 CFM with 12 mm static Pressure

1

-

-

... More
1000 CFM with 15 mm static Pressure

1

-

-

... More
1100 CFM with 15 mm static Pressure

1

-

-

... More
1200 CFM with 15 mm static Pressure

1

-

-

... More
1400 CFM with 15 mm static Pressure

1

-

-

... More
1500 CFM with 15 mm static Pressure

1

-

-

... More
PROPELLER FAN:

-

-

-

... More
Supply, installation, testing, commissioning of Wall mounted fan with gravity louvers, vibration isolators & speed regulator, complete as per specification and drawing.

-

-

-

... More
100 CFM

10

-

-

... More
200 CFM

15

-

-

... More
300 CFM

4

-

-

... More
SENSOR

-

-

-

... More
CO Sensors along with PLC controller and suitable cable as per specifications with IP-65 protection. CO sensors having range 0 to 300 ppm with analog output 4 to 20mA or 0 to 10 V DC output signal. These CO sensors and controller are interface with fire alarm panel/BMS (as available). All CO Sensors specification meets with NBC-16 requirements & Specification.

10

-

-

... More
H2 Sensor for Battery room with IP-65 protection, long life, fast response with high accuracy and integrated with BMS Panel. Hydrogen level in Battery room as per Fire Code and CE/UL approved. These H2 sensors and controller are interface with fire alarm panel/BMS (as available) & Specification.

1

-

-

... More
Response Time10 sec

-

-

-

... More
Output-4-20mA or 2-10V, Supply-24V DC

-

-

-

... More
AIR SCRUBBER (DRY TYPE)

-

-

-

... More
Supply, Installation, Testing & Commissioning of factory fabricated Single Skinned Air-Scrubber unit floor mounted type with blower, blower section and blower motor . Air Scrubber having minimum 90% efficiency with centrifugal fan, mentalistic vibration isolation, Direct drive arrangement, VCD, distribution headers, access door, complete as per specifications & drawings. The unit shall be fire retardant, water proof double flexible connection at fan outlet and starter panel. The Industrial Electronic Air Cleaning System shall be supplied as a one-piece factory joined assembly of individual section(s) selected to treat oil mist, smoke, fume, grease & dust / powder problems.

-

-

-

... More
The unit shall provide efficiency of 90% or better for single pass base on ASHRAE test method at flow rates of 800 – 1500 CFM per module (supported by sample test report by a US laboratory).

-

-

-

... More
Housing shall be constructed with minimum 1.4 mm thick galvanized steel sheet (16 gauge) with reinforced structure and powder coated to protect against rust and corrosion. It shall have a hinged door for cell access, located one side to the unit. The door shall be gasketed to prevent air leakage. There shall be a safety interlock switch to cut off primary supply when the access door is opened.

-

-

-

... More
Ionizing-Collecting Cell(s) shall be of one-piece construction consisting of a series of repelling and collection plates. Both repelling and collector plates shall be aluminum alloy material, rigidly retained in place with tubular spacers and tie rods. Each plate shall be corrugated, perpendicular to airflow direction. Each cell shall weigh not more than 16 kg with at least 9 ionizing wires.

-

-

-

... More
Ionizing electrodes / wires shall be of tungsten material, rigidly supported both vertically and laterally. Ionizing electrode to ground electrode spacing shall be 1.0” (25 mm). High voltage support insulators shall be of Teflon material for dielectric strength.

-

-

-

... More
Each Ionizing / Collecting Cell shall be capable of handling up to 3000 cmh of air. There shall be one to four such ionizing / collecting cells per module. Each module shall handle up to 3000 CMH, 6000 CMH, 9000 CMH and 12000 CMH per module respectively. Multiple units of the same or different modules may be needed to handle higher air flow capacities.

-

-

-

... More
Sound level at 3mt distance at 1.5mt Height from fan outlet shall not be more than 80dbA.

-

-

-

... More
Power supplies shall be 100% solid state, operate on 240 VAC, 50 HZ, 1 Phase input and provide a dual high voltage output of 12 to 13 KVDC for the ionizer and 6.0 to 6.5 KVDC for the collector, in normal operation conditions. Current output at the high tension shall be 12mA. A maximum power output for the solid-state power supply shall be from 50 watts to up to 150 watts to maintain the specified collection efficiency.

-

-

-

... More
The rated efficiency shall be up to 95% based on the NIOSH 5026 OIL MIST TEST. Past on situ test reports of 90% to 95% of the said test method must be submitted.

-

-

-

... More
16,000 CFM with 60 mm static Pressure

1

-

-

... More
AIR WASHER :

-

-

-

... More
Supply, Installation, Testing & Commissioning of factory fabricated Double Skinned Air-washer unit floor mounted type fabricated out of extruded aluminum section with 0.8mm pre-plasticized /pre-coated Galvanized steel sheet outside & 0.8 mm plain Galvanized steel sheet inside with blower, blower section and blower motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply. Air washer having minimum 90% efficiency with consisting of centrifugal fan, mounting arrangements, mentalistic vibration isolation, belt drive arrangement, VCD, distribution headers, access door, pump, stainless steel water tank, suction screen, impregnated cellulose paper fills, nylon prefilter, GI ‘B’ class piping & associated works, quick fill, makeup & drain connections with butterfly & float valves etc. complete as per specifications & drawings. The unit shall be fire retardant, water proof double flexible connection at fan outlet and with starter panel.

-

-

-

... More
Filters section shall incorporate synthetic washable filters of at least 50 mm thickness in suitable aluminum frame. Velocity of air across the fillers shall not exceed 500 fpm (2.5m/s).

-

-

-

... More
8000 CFM with 50 mm static Pressure

1

-

-

... More
10000 CFM with 50 mm static Pressure

1

-

-

... More
14000 CFM with 50 mm static Pressure

1

-

-

... More
16000 CFM with 50 mm static Pressure

1

-

-

... More
22000 CFM with 50 mm static Pressure

2

-

-

... More
Total Of Ventilation Equipment's

-

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
CHILLED /HOT WATER PIPING

-

-

-

... More
Supply, installation, testing and commissioning of bare chilled / Hot water piping of M.S 'Heavy' , complete with fittings like elbows, tees, reducers, bends, MS flanges, supports, welding, painting etc. but excluding valves as required conforming to IS:1239 / 3589 & technical specification. All Chilled Water and hot water pipes are insulated with Class-O closed cell elastometric nitrile rubber tubular Insulation having duly laminated aluminum foil of mat finish as given below or in technical specification.

-

-

-

... More
Chilled Water Pipe (With Nitrile Rubber tubular Insulation)

-

-

-

... More
Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 Kg / cu m density, thermal conductivity 0.037 W/MK or better at 20 deg mean temperature class ‘O’ insulation applied by suitable rubber based adhesive complete including repairing of damage to building etc. as per specifications and as required complete in all respect. Insulation duly laminated with aluminum foil of mat finish as given below or in technical specification

-

-

-

... More
Note:-The Pipes of sizes 150mm & below shall be M.S. ‘C’ class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes up to 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.

-

-

-

... More
400 mm dia (32 mm Thick NR)

245

-

-

... More
350 mm dia (32 mm Thick NR)

50

-

-

... More
300 mm dia (32 mm Thick NR)

25

-

-

... More
250 mm dia (32 mm Thick NR)

150

-

-

... More
200 mm dia (32 mm Thick NR)

225

-

-

... More
150 mm dia (32 mm Thick NR)

595

-

-

... More
125 mm dia (32 mm Thick NR)

515

-

-

... More
100 mm dia (32 mm Thick NR)

575

-

-

... More
80 mm dia (32 mm Thick NR)

680

-

-

... More
65 mm dia (32 mm Thick NR)

515

-

-

... More
50 mm dia (32 mm Thick NR)

570

-

-

... More
40 mm dia (32 mm Thick NR)

425

-

-

... More
32 mm dia (19 mm Thick NR)

350

-

-

... More
25 mm dia (19 mm Thick NR)

290

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
Pressure Independent Balancing Cum Two Way Control Valve

-

-

-

... More
Supply, Installation, Testing and Commissioning of Pressure Independent Balancing Cum Two way Control valve having differential pressure controller & self- balancing for chilled water with electrical actuator. Pressure independent type dynamic balancing valve integrated with 2 way modualating control valves in a single body. Body material shall be brass or cast steel.  All working parts like stem & spring shall be in SS. Balancing should be done only in Valve not in actuator so that at any given condition of failure, balancing is not lost and easily accessible. The actuator versions should be directly mounting on valves without any adjustments. All the electrical actuator shall be operated through 24 V AC and should be modulated through control signals 0…10 V DC, 4….20 mA, through BMS or display thermostats. The actuators should have stroke position indication and manual override mean to manual open and close the actuators when commissioning. Maximum close off pressure shall not be less than 6 Bar for up to 50 mm valves and not be less than 7 Bar for 65 mm & above. Valves should have pressure rating of 25 Bar minimum.

-

-

-

... More
Electronic modulating actuator working on 2-10 V DC, 4- 20 mA electric signal. The minimum close off Pressure of actuator must be 1.5 times shut off head of pump as per specifications of following sizes:

-

-

-

... More
65 mm Dia, Maximum 72 GPM

15

-

-

... More
50 mm Dia, Maximum 50 GPM

5

-

-

... More
40 mm Dia, Maximum 26 GPM

10

-

-

... More
32 mm Dia, Maximum 17 GPM

5

-

-

... More
25 mm Dia, Maximum 8 GPM

4

-

-

... More
20 mm Dia, Maximum 6 GPM

1

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
Motorised Butterfly Valves

-

-

-

... More
Supply, installation, testing and commissioning of motorised on / off butterfly valves with modulating motor in return chilled & condenser water line of each chiller, condenser & cooling tower operated through BMS & of following sizes:

-

-

-

... More
200 mm dia (For Chillers)

5

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
BUTTERFLY VALVE (MANUAL)

-

-

-

... More
Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.

-

-

-

... More
BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot eater circulation as specified

-

-

-

... More
200 mm dia (32 mm Thick NR)

26

-

-

... More
150 mm dia (32 mm Thick NR)

2

-

-

... More
80 mm dia (32 mm Thick NR)

30

-

-

... More
65 mm dia (32 mm Thick NR)

10

-

-

... More
50 mm dia (32 mm Thick NR)

30

-

-

... More
40 mm dia (32 mm Thick NR)

10

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
Brass Ball Valves

-

-

-

... More
PN 16 pressure rating for chilled water/hot eater circulation as specified

-

-

-

... More
25 mm dia With Strainer

215

-

-

... More
32 mm dia With Strainer

34

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
Automatic Balancing Valves

-

-

-

... More
Supply, installation, testing and commissioning of automatic balancing valves in return chilled and condenser water line of each chiller, condenser and cooling tower as per tender specification & of following sizes:

-

-

-

... More
200 mm dia (For Chillers) With Insulation

5

-

-

... More
80 mm dia

2

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
BALANCING VALVE

-

-

-

... More
BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled / hot water circulation as specified.

-

-

-

... More
125 mm dia (32 mm Thick NR)

1

-

-

... More
100 mm dia (32 mm Thick NR)

2

-

-

... More
80 mm dia (32 mm Thick NR)

15

-

-

... More
65 mm dia (32 mm Thick NR)

5

-

-

... More
50 mm dia (32 mm Thick NR)

10

-

-

... More
40 mm dia (32 mm Thick NR)

9

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
NON RETURN VALVE

-

-

-

... More
NON - RETURN VALVE with duel plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating for chilled / hot water circulation including insulation as specified.

-

-

-

... More
200 mm dia (32 mm Thick NR)

10

-

-

... More
150 mm dia (32 mm Thick NR)

2

-

-

... More
125 mm dia (32 mm Thick NR)

1

-

-

... More
100 mm dia (32 mm Thick NR)

2

-

-

... More
80 mm dia (32 mm Thick NR)

15

-

-

... More
65 mm dia (32 mm Thick NR)

16

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
Y-STRAINER

-

-

-

... More
Y - STRAINER of Ductile CI Body flanged ends with stainless steel strainer for chilled / hot water circulation including insulation as specified.

-

-

-

... More
200 mm dia (32 mm Thick NR)

10

-

-

... More
150 mm dia (32 mm Thick NR)

2

-

-

... More
125 mm dia (32 mm Thick NR)

1

-

-

... More
100 mm dia (32 mm Thick NR)

2

-

-

... More
80 mm dia (32 mm Thick NR)

15

-

-

... More
65 mm dia (32 mm Thick NR)

16

-

-

... More
50 mm dia (32 mm Thick NR)

10

-

-

... More
40 mm dia (32 mm Thick NR)

9

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
Auto Air Vent Valve

-

-

-

... More
15 mm dia

45

-

-

... More
19 mm dia

25

-

-

... More
25 mm dia

5

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
PRESSURE GAUGE (ALL SS TYPE)

-

-

-

... More
Pressure gauges of Bourdon type with range selected so that normal operation is near to middle of the scale. Syphons and cocks to be provided along with SS snubber.

-

-

-

... More
Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required

110

-

-

... More
THERMOMETERS

-

-

-

... More
Thermometers of approved make & shall be of mercury in steel type with range suitable for the temperature services. It should be installed in the thermowells as explained in the tender specifications.

-

-

-

... More
Providing & fixing in position the mercury in glass industrial type thermometers

110

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
FLOW SWITCH

-

-

-

... More
Supplying, fixing, testing and commissioning of SG Iron Body flow switch with necessary control wiring and interlocking at Condenser Water Pump

24

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
DRAIN VALVES

-

-

-

... More
Supply, Installation, Testing & Commissioning for Drain Valves in dirt legs complete with nipples as per specifications.

-

-

-

... More
50 mm Dia

12

-

-

... More
40 mm Dia

10

-

-

... More
25 mm Dia

15

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
CONDENSOR WATER PIPES

-

-

-

... More
Supplying, fixing, testing and commissioning of condenser water pipes of following sizes of MS ‘C’ class along with necessary clamps, vibration isolators and fittings such as bends, tees etc. But excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect.

-

-

-

... More
Note:-The Pipes size 150mm & below shall be M.S. ‘C’ class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes up to 350 mm dia. And from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.

-

-

-

... More
All outdoor condenser water piping shall be treated with Zinc Cromate Primer plus two coats of Epoxy Paints.

-

-

-

... More
450 mm dia

5

-

-

... More
400 mm dia

95

-

-

... More
300 mm dia

25

-

-

... More
250 mm dia

65

-

-

... More
200 mm dia

20

-

-

... More
150 mm dia

10

-

-

... More
125 mm dia

25

-

-

... More
100 mm dia

40

-

-

... More
Supplying, fixing, testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.

-

-

-

... More
BUTTERFLY VALVE

-

-

-

... More
BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified.

-

-

-

... More
250 mm dia

20

-

-

... More
NON RETURN VALVE

-

-

-

... More
NON - RETURN VALVE with dual plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating as specified.

-

-

-

... More
250 mm dia

10

-

-

... More
MOTORIZED BUTTERFLY VALVE

-

-

-

... More
Supplying, fixing, testing and commissioning of following sizes Motorized Butter fly Valves with CI Body, SS Disc,O - ring and minimum PN-16 pressure rating , conforming to BS 5155, IS 13095, with IP-55 actuator, capable of accepting up to 10V DC and up to 20mA electric signal and providing similar transduced feedback output to control system as required.

-

-

-

... More
250 mm dia

5

-

-

... More
Automatic Balancing Valves

-

-

-

... More
Supply, installation, testing and commissioning of automatic balancing valves in return chilled and condenser water line of each chiller, condenser and cooling tower as per tender specification & of following sizes:

-

-

-

... More
250 mm dia

5

-

-

... More
Pot Strainer

-

-

-

... More
400 mm dia

1

-

-

... More
FLOW SWITCH

-

-

-

... More
Supplying, fixing, testing and commissioning of SG Iron Body flow switch with necessary control wiring and interlocking at Condenser Water Pump

12

-

-

... More
DRAIN VALVES

-

-

-

... More
Supply, Installation, Testing & Commissioning for Drain Valves in dirt legs complete with nipples as per specifications.

-

-

-

... More
50 mm Dia

4

-

-

... More
40 mm Dia

6

-

-

... More
25 mm Dia

4

-

-

... More
DRAIN PIPING

-

-

-

... More
GI Condensate Drain Piping

-

-

-

... More
Supply, installation, testing and commissioning of condensate drain water piping of GI 'Medium' class complete with fittings like elbows, tees, reducers, bends, MS flanges, supports, welding, painting etc. as required conforming to tender specifications and of following sizes. Pipe Shall be duly insulated with 6 mm thick closed cell expanded polythene.

-

-

-

... More
25 mm dia

366

-

-

... More
32 mm dia

245

-

-

... More
40 mm dia

165

-

-

... More
50 mm dia

120

-

-

... More
65 mm dia

85

-

-

... More
UPVC Condensate Drain Piping

-

-

-

... More
Supply,installation,testing and commissioning of UPVC drain piping complete with fittings, supports as per specifications and duly insulated with 6 mm thick closed cell expanded polythene.

-

-

-

... More
25 mm ID

351

-

-

... More
32 mm ID

225

-

-

... More
40 mm ID

185

-

-

... More
TOTAL OF CHILLED, CONDENSOR & HOT WATER PIPES, VALVES WITH INSULATIONS

-

-

-

... More
SHEET METAL DUCT

-

-

-

... More
ALUMINIUM (AL) Ducting For OT

-

-

-

... More
Supply, fabrication, installation & testing of Aluminium sheet metal ducting duly polysulphide sealed complete with Splitter Damper, vanes etc. as required for OT and as per ISI specifications and as per approved shop drawings.

-

-

-

... More
Supply. Installation, testing and commissioning of insulation on the surface of the duct with duly laminated aluminum foil of mat finish closed cell nitrile rubber (Class 'O' ) with suitable adhesive, as per specifications and drawings. The Joints shall be sealed with 50mm wide and 3 mm thick self adhesive nitrile rubber tape Insulation. The rates shall include all materials of the insulation and labour works with adhesive, complete as required and specifications.

-

-

-

... More
The joint between the ducts shall be done by means of polymer “flange / slide-in channel” system to prevent air leakages. Turning vanes, elbows and reducers to be considered as part of supply of ducts. Ducts shall be supported by cable supports / GI slotted channels with threaded rods. Internal Stiffeners shall be used to prevent bulging of ducts for the sizes above 800 mm.

-

-

-

... More
0.80 MM (22 Gauge ) With 32mm Insulation

60

-

-

... More
1.00 MM (20 Gauge ) With 32mm Insulation

5

-

-

... More
1.25 MM (18 Gauge) With 32mm Insulation

5

-

-

... More
FACTORY FABRICATED GALVANIZED STEE(GSS) SHEET METAL DUCTS

-

-

-

... More
Supply. Installation, testing and commissioning of factory fabricated Galvanized Steel (GSS) Sheet metal ducts with flanges, inbuilt sealant, gasket, supports, vanes, dampers, links, levers and quadrants etc. as per specifications and drawings. Duct shall be furnish at site in "L" shape or box shape from factory. The rates shall include all materials of the duct and labour for suspension and supporting arrangement for plenums, ducts, complete with fire retardant flexible connection as required and as per specifications.

-

-

-

... More
Factory fabricated GSS sheet metal rectangular ducting as per IS 655-2006

-

-

-

... More
0.63 MM (24 Gauge )

5850

-

-

... More
0.80 MM (22 Gauge )

2075

-

-

... More
1.00 MM (20 Gauge )

550

-

-

... More
1.25 MM (18 Gauge) Plenum

250

-

-

... More
SITE FABRICATED GALVANIZED STEE(GSS) SHEET METAL DUCTS

-

-

-

... More
Supply, Fabrication, installation and testing of Galvanized Steel (GS) sheet metal ducts & finally applying fire rated paint as per BS 476 Part 24 (Site FABRICATED DUCTS For Connection /Plenum etc.) in accordance with the approved shop drawings complete with all accessories like vanes, flanges, suspension rods , anchor bolts, GI bolts & nuts, etc., as per specifications.

-

-

-

... More
Site fabricated GSS sheet metal rectangular ducting as per IS 655-2006

-

-

-

... More
0.63 MM (24 Gauge )

575

-

-

... More
0.80 MM (22 Gauge )

475

-

-

... More
1.00 MM (20 Gauge )

85

-

-

... More
1.25 MM (18 Gauge)

55

-

-

... More
FIRE RATED FACTORY FABRICATED GALVANIZED STEE(GSS) SHEET METAL DUCTS

-

-

-

... More
Supply. Installation, testing and commissioning of Fire rated sheet metal ducts shall be fabricated from Lock Forming Quality grade prime galvanized steel sheet with flanges complete with supports, vanes, dampers, links, levers and quadrants etc. as per specifications and drawings. Supporting distance shall not exceed 1.2 Mtr with 6mm thick fire retardant gasket suitable for 250 deg C 2 hr shall be used in duct joints along with fire sealants. Suitable access doors shall be provided at every 3m. The rates shall include all materials of the duct and labor for suspension and supporting arrangement for plenums, ducts, complete with fire retardant flexible connection as required and as per specifications.

-

-

-

... More
All fire rated duct, smoke exhaust ducts shall be quoted with flame bar BWII or equivalent to achieve the required fire rating, also all the related accessories gaskets shall be suitable for the required fire rating.

-

-

-

... More
Factory fabricated GSS sheet metal rectangular ducting as per IS 655-2006

-

-

-

... More
1.25 MM (18 Gauge) Plenum & Exhaust Duct

1250

-

-

... More
Duct Insulation

-

-

-

... More
Supply. Installation, testing and commissioning of insulation on the surface of the duct with duly laminated aluminum foil (26G) of mat finish closed cell nitrile rubber (Class 'O' ) with suitable adhesive, as per specifications and drawings. The Joints shall be sealed with 50mm wide and 3 mm thick self adhesive nitrile rubber tape Insulation. The rates shall include all materials of the insulation and labour works with adhesive, complete as required and specifications.

-

-

-

... More
19 mm

7450

-

-

... More
25 mm

950

-

-

... More
ACCOUSTIC LINING

-

-

-

... More
AHU ROOM ACCOUSTIC LINING

-

-

-

... More
Supplying, fixing acoustic lining on wall and ceiling of AHU rooms with 50mm thick, density 32 kg/cu.m resin bonded glass fiber insulation friction fixed in 610mm x 610 mm frame work made of 25X50X50X50X25 mm made out of 0.6mm thick GI sheet U shaped channel and covered with reinforced fiber glass tissue and finished with 0.80 mm perforated aluminium sheet etc. complete as required and as per specifications.

-

-

-

... More
50 mm thick

1250

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
Duct Acoustic Lining

-

-

-

... More
Supply and fixing of acoustic lining of supply air duct and plenum with thick Engineered Nitrile Rubber open cell foam having a Noise Reduction Coefficient of 0.55 with Density 140 - 180 Kg/m3 passing Class 1 Fire Performance test as per BS 476 Part 7, Air Erosion test for 10,000 fpm air velocity as per ASTM C 1071-05 and with built-in antimicrobial protection. The material should pass Fungi Resistance Test as per DIN EN ISO 846 Method A and Bacterial Resistance Test as per DIN EN ISO 846 Method C; to be applied using manufacturer's recommended Rubber based Adhesive in a blend of solvents.

-

-

-

... More
20 mm

1050

-

-

... More
25 mm

725

-

-

... More
CONTROL DAMPER

-

-

-

... More
VOLUME CONTROL DAMPER

-

-

-

... More
Supply. Installation, testing and commissioning of G.I construction Duct/ Volume control Dampers for Controlling the Airflow in Ducts with neoprene rubber gaskets,nuts, Bolts, Centrifugals Linkages, Flanges etc. as per specification.

40

-

-

... More
MOTRIZED VOLUME CONTROL DAMPER

-

-

-

... More
Supply, installation, testing and commissioning of Motorized (ON-OFF Type) duct mounted GI volume control damper with enthalpy sensor and necessary control wire (minimum 1.5 sqmm) for integration within AHU room.

-

-

-

... More
Motorized (ON-OFF Type) duct mounted GI volume control damper

5

-

-

... More
Motorized (ON-OFF Type) duct mounted GI volume control Actuator

15

-

-

... More
BACK DRAFT DAMPERS

-

-

-

... More
Supply, Installation, testing and commissioning of 18 Gauge G.I construction Back draft Dampers for Controlling the recirculation of air with neoprene rubber gaskets,nuts, Bolts, Centrifugals Linkages, Flanges etc. as per specification. Louvres shall be made powder coated extruded aluminum.

6

-

-

... More
PRESSURE RELIEF DAMPERS

-

-

-

... More
Supply,. Installation, testing and commissioning of 18 Gauge aluminum alloy extrusions with welded/cleated frames Pressure Relief Dampers for Controlling the Excess pressure up to 60pa with neoprene rubber gaskets,nuts, Bolts, Centrifugals Linkages, Flanges etc. as per specification. Louvres shall be made powder coated extruded aluminum with suitable thickness.

4

-

-

... More
GRILLES AND DIFFUSERS

-

-

-

... More
Grilles without Dampers

-

-

-

... More
Supply. Installation, testing and commissioning of powder coated extruded aluminum sections grills as per specification.

24

-

-

... More
Grilles with Dampers

-

-

-

... More
Supply. Installation, testing and commissioning of powder coated extruded aluminum section grills with dampers for supply air terminal for air-conditioning as per specification.

28

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
Diffusers

-

-

-

... More
Supply. Installation, testing and commissioning of powder coated extruded aluminum square diffusers with antismudge ring and removable core.

-

-

-

... More
Supply air with dampers

350

-

-

... More
Return air without damper

335

-

-

... More
Flexible Duct

-

-

-

... More
Supply. Installation, testing and commissioning of thermal flexible aluminum duct of following sizes duly supported at regular interval as per site requirement & spefications.

-

-

-

... More
200 mm

252

-

-

... More
Slot Diffusers

-

-

-

... More
Supply. Installation, testing and commissioning of slot diffusers with/without damper as specified below and as per specification.

-

-

-

... More
3-Slot Diffuser

35

-

-

... More
2-Slot Diffuser

30

-

-

... More
Linear Grille

-

-

-

... More
Supply. Installation, testing and commissioning of powder coated extruded aluminum Linear Grille.

-

-

-

... More
100 mm

50

-

-

... More
150 mm

610

-

-

... More
200 mm

90

-

-

... More
Exhaust/Fresh Air Louvers

-

-

-

... More
Supply. Installation, testing and commissioning of exhaust air/fresh air louvers of powder coated extruded aluminum construction with bird screen, minimum 80 mm deep.

18

-

-

... More
Fire Damper with Spring and Fusible Link

-

-

-

... More
Supplying, installation, testing and commissioning of Fusible Link type fire and smoke dampers of 18 gauge GI sheet construction suitable for 120 minute fire rating.

2

-

-

... More
Fire Dampers & Actuator

-

-

-

... More
Supplying, Fixing, testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring, the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications.

-

-

-

... More
Duct/Wall mounted multi blade, motorised fire & smoke dampers with spring return actuator. The damper shall be of at least 1.5 hr. fire rating and actuated with the help of 24 V electric actuator excluding. The damper shall be as per UL listed UL 555; 1995 and CBRI approved. The damper shall be constructed out of 16G galvanised steel sheet & as per specification with Control Cable to Potential Free Contact for tripping of AHU fan motor.

-

-

-

... More
Supply, installation, testing and commissioning of Motorised Spring Return Actuator for devices up to 0.8 sq. meter with control panel & temperature sensor.

-

-

-

... More
Fire Damper

8

-

-

... More
Actuator

45

-

-

... More
Under Deck Insulation of Exposed Roof

-

-

-

... More
Providing and Fixing Underdeck Insulation with 50 mm thick with closed cell Nitrile Rubber with prelaminated Aluminum foil on one side having a low stable k value of 0.035 k.cal/hr.m at 10.C and minimum density of 40-55 ± 3 kg/cum.The R-value should be as per ECBC Code.

-

-

-

... More
50mm

2700

-

-

... More
Total Of Ducting, Insulation, Damper Grille & Diffusers

-

-

-

... More
ISOLATOR FOR OUTDOOR UNIT

-

-

-

... More
Supply, Installation, Testing & Commissioning of following Switchgears as an Isolator in IP-65 rated in power coated 16 SWG sheet steel enclosure .

-

-

-

... More
40A 4P MCCB(25 KA)

10

-

-

... More
63A 4P MCCB(25 KA)

25

-

-

... More
100A 4P MCCB(25 KA)

10

-

-

... More
CUBICAL PANEL BOARD FOR HIGH SIDE EQUIPMENTS

-

-

-

... More
Design, Manufacture, Supplying, Transport to the site, Receiving, Unloading, Shifting to various locations, handling, assembling, installation in correct aligned position, grouting with dash fasteners, GI nuts-bolts, testing and commissioning of Totally Type Tested Panels (Form-4B construction) complying to IEC:61439 -1/2 cubical with Internal arc withstand of 50kA for 0.3 second and minimum impact resistance IK10 as per IEC:62262 with each compartment front unbreakable glazed door cover and back solid door. The degree of protection of minimum IP:42 for indoor and IP:65 for outdoor use. Panels shall be tested for an Impulse Withstand Voltage of 12kV. Suitable for 415V, 3Phase, 4 Wire 50 Hz Ac supply system bolted fabricated in compartmentalized (preferably) design from CRCA sheet steel of 2mm thick for frame work and covers, 3mm thick for gland plate, bottom base channel of MS section not less than 100mmx 50mmx50mmx 5mm thick for Main L.T. Panel and capacitor panels and 40mmx25mmx25mmx 5mm thick plates for MDB/MCC and SDBs etc.

1

-

-

... More
Including cleaning & finishing complete, SMC bus bar supports, with short circuit withstand capacity of minimum 50kA for 1 Sec., fabrication shall be done in transportable sections and all front and back doors shall be hinged type and earth with frame, Entire panel shall have a common copper continuous earth bar of size 40mm x 6mm or as specified below at the rear with 2 Nos. earth stud each side, solid inter connections from main bus bar to switch gears up to cable alley with required size. bus bars and insulated control wiring with suitable size of FRLS PVC insulated copper conductor cable, cable alleys, cable gland plates in two half, incl. providing following switch gears :-

-

-

-

... More
Panels will be powder coating (60-80micron as per IS:13871 for indoor and 90-100 micron for outdoor), include one size higher terminal block in cable alley and interconnecting wires between bus bars and terminals via MCB. All Bus-Bar alley and relay compartments shall be provide fully automatic control thermostat with strip heater.

-

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
425TR Water Cooled Centrifugal Chiller-5Nos (4 Working+1Stand by)

-

-

-

... More
5#Primary Pumps ( 4W+1S)(25 HP EACH)

-

-

-

... More
6# secondary pumps (4W+2S) (50 HP EACH)

-

-

-

... More
3#150 kW Hot Water Generator(2w+1s)

-

-

-

... More
3# Hot Water Pumps (2W+1S)(10.0 HP EACH)

-

-

-

... More
5#CDW Pumps (4W+1S)(60 HP EACH)

-

-

-

... More
5# 500TR Cooling Tower ( 4W+1S) ( 2 #10.0 HP each )

-

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
INCOMER

-

-

-

... More
Incomers –2 Nos 1600 Amps 4P ACB 50 kA for O/C , S/C& E/F protection ,reverse power relay- trip & RS485 Port, cable connection on one side and Busbar connection on the other side.

-

-

-

... More
INDICATING PANEL

-

-

-

... More
Provide 1nos phase indicating lamps LED each backed up with fuse and switch.

-

-

-

... More
Provide 1600/5a CT CI-1,15VA operated Digital Ammeter for all in-comers and outgoings including C/T's.

-

-

-

... More
Provide 0-500 Volts range Digital Volt Meter with selector switch for all incomers

-

-

-

... More
Two numbers indicating lamps LED on each incoming and outgoing feeder for indicating the status of feeder.

-

-

-

... More
One number indicating lamp LED on each incoming and outgoing feeder for indicating that the feeder has tripped due to fault condition.

-

-

-

... More
1 No. Power factor meter

-

-

-

... More
1 No. Digital type energy meter.

-

-

-

... More
Break Control Switch (T-N-C)

-

-

-

... More
Control Fuse Base

-

-

-

... More
BUS COUPLER

-

-

-

... More
Incomers –1 Nos 1600 Amps 4P ACB 50 kA for O/C , S/C& E/F protection trip & RS485 Port, cable connection on one side and Busbar connection on the other side.

-

-

-

... More
BUSBARS

-

-

-

... More
Sections of 2Nos x 2000 Amps TPN bus bar chamber of suitable lengths with Aluminium bus bars. All bus bars and interconnections shall be of suitable size Al strips. Current density of Al shall not be more than 1.0 Amps/ sq.mm cross sectional area of Bus Bar

-

-

-

... More
Incomer and 3Nos x1600 A EDO 4P ACB bus coupler shall be mechanically & electrically interlocked to avoid paralleling of the two supplies.

-

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
OUTGOING

-

-

-

... More
425TR Water Cooled Centrifugal Chiller-5Nos (4 Working+1Stand by)

-

-

-

... More
800A 4P ACB of suitable rating with overload, short circuit protection, on /off /trip indication light with control MCB. MCCB Shall be 35 KA (ICU=ICS) SET - 07 ( Extra 2 Nos Spare )

-

-

-

... More
5#Primary Pumps ( 4W+1S)(25 HP EACH)

-

-

-

... More
100A TPN MCCB of suitable rating with 25 HP Star delta stater , overload relay inbuilt single phase prevention, start/stop push buttons, MFM, on / off / trip indication lights with control MCB, Auto Manual Selector switch. MCCB Shall be 35 KA (ICU=ICS) SET - 07 ( Extra 2 Nos Spare )

-

-

-

... More
6# secondary pumps (4W+2S) (50 HP EACH)

-

-

-

... More
160 A TPN MCCB of suitable rating with Space of 50 HP VFD, overload relay inbuilt single phase prevention, start/stop push buttons, on / off / trip indication lights with control MCB, Auto Manual Selector switch. MCCB Shall be 35 KA (ICU=ICS) SET - 08 ( Extra 2 Nos Spare )

-

-

-

... More
3#150 kW Hot Water Generator(2w+1s)

-

-

-

... More
400A 4P MCCB of suitable rating with overload, short circuit protection, on /off /trip indication light with control MCB. MCCB Shall be 35 KA (ICU=ICS) SET - 04 ( Extra 1 Nos Spare)

-

-

-

... More
3# Hot Water Pumps (2W+1S)(10.0 HP EACH)

-

-

-

... More
63 A TPN MCCB of suitable rating with Space of 15 HP VFD, overload relay inbuilt single phase prevention, start/stop push buttons, on / off / trip indication lights with control MCB, Auto Manual Selector switch. MCCB Shall be 35 KA (ICU=ICS) SET - 04 ( Extra 1 Nos Spare )

-

-

-

... More
5#CDW Pumps (4W+1S)(60 HP EACH)

-

-

-

... More
160A TPN MCCB of suitable rating with Space for 50 HP VFD , overload relay inbuilt single phase prevention, start/stop push buttons, MFM, on / off / trip indication lights with control MCB, Auto Manual Selector switch. MCCB Shall be 35 KA (ICU=ICS) SET - 07( Extra 2 Nos Spare )

-

-

-

... More
5# 500TR Cooling Tower ( 4W+1S) ( 2 #10.0 HP each )

-

-

-

... More
6x 40 A TP MPCB with 2x 10.0HP Star Delta starter, overload relay inbuilt single phase prevention, start/stop push buttons, digital ammeter (0- 40A) with three CT, on / off / trip indication lights with control MCB, Auto Manual Selector switch. MPCB Shall be 35 KA (ICU=ICS) SET - 7 (Extra 2 Nos. Spare )

-

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
POWER CABLING

-

-

-

... More
Supply, laying, testing and commissioning of power and control cabling as per specification given in the tender.

-

-

-

... More
A) Power cabling (XLPE insulated Aluminum / Copper conductor as given below armoured / unarmoured cables of 1.1 KV Grade) including cable end termination with brass compression glands & lugs etc. as per specification.

-

-

-

... More
Note:- Power cable with earthing shall be made available near indoor / outdoor units. Only termination into HVAC equipment's (Indoor & Outdoor) shall be done by HVAC Contractor.

-

-

-

... More
3.5 Cx 25 Sqmm Al Conductor

33

-

-

... More
3.5 Cx 35 Sqmm Al Conductor

180

-

-

... More
3.5 Cx 50 Sqmm Al Conductor

25

-

-

... More
3.5 Cx 70 Sqmm Al Conductor

180

-

-

... More
3.5 C x 95 Sq. mm Al Conductor

15

-

-

... More
3.5 C x 120 Sq. mm Al Conductor

10

-

-

... More
3.5 C x 150 Sq. mm Al Conductor

100

-

-

... More
3.5 C x 185 Sq. mm Al Conductor

5

-

-

... More
3.5 C x 240 Sq. mm Al Conductor

5

-

-

... More
3.5 C x 300 Sq. mm Al Conductor

150

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
Supply and laying ,testing and commissioning of following sizes of Copper conductor control cables with PVC conduit & fixing clamps and effecting proper connections to equipment etc. of following sizes :

-

-

-

... More
4C x 16 Sq. mm Copper Conductor (Armoured)

450

-

-

... More
4C x 10 Sq. mm Copper Conductor (Armoured)

580

-

-

... More
4C x 6 Sq. mm Copper Conductor (Armoured)

780

-

-

... More
4C x 4 Sq. mm Copper Conductor (Armoured)

480

-

-

... More
3C x 1.5 sq. mm Copper Conductor (unarmoured)

950

-

-

... More
3C x 2.5 sq. mm Copper Conductor (unarmoured)

670

-

-

... More
3C x 4 sq. mm Copper Conductor (unarmoured)

240

-

-

... More
3C x 10 sq. mm Copper Conductor (Armoured)

85

-

-

... More
3C x 16 sq. mm Copper Conductor (Armoured)

250

-

-

... More
GI CABLE TRAY

-

-

-

... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

-

-

-

... More
150 mm wide x 50 mm depth x 1.6 mm thickness.

180

-

-

... More
300 mm wide x 50 mm depth x 1.6 mm thickness.

250

-

-

... More
450 mm wide x 50 mm depth x 2.0 mm thickness.

450

-

-

... More
600 mm width X 50 mm depth X 2.0 mm thickness

150

-

-

... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

-

-

-

... More
150 mm wide x 50 mm depth x 1.6 mm thickness.

24

-

-

... More
300 mm wide x 50 mm depth x 1.6 mm thickness.

18

-

-

... More
450 mm wide x 50 mm depth x 2.0 mm thickness.

12

-

-

... More
600 mm width X 50 mm depth X 2.0 mm thickness

9

-

-

... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

-

-

-

... More
150 mm wide x 50 mm depth x 1.6 mm thickness.

10

-

-

... More
300 mm wide x 50 mm depth x 1.6 mm thickness.

15

-

-

... More
450 mm wide x 50 mm depth x 2.0 mm thickness.

12

-

-

... More
600 mm width X 50 mm depth X 2.0 mm thickness

18

-

-

... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Cross member"(galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

-

-

-

... More
150 mm width X 50 mm depth X 1.6 mm thickness

12

-

-

... More
300 mm width X 50 mm depth X 1.6 mm thickness

14

-

-

... More
450 mm width X 50 mm depth X 2.0 mm thickness

15

-

-

... More
600 mm width X 50 mm depth X 2.0 mm thickness

20

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “Reducer” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

-

-

-

... More
150 mm wide x 50 mm depth x 1.6 mm thickness.

10

-

-

... More
300 mm wide x 50 mm depth x 1.6 mm thickness.

12

-

-

... More
450 mm wide x 50 mm depth x 2.0 mm thickness.

15

-

-

... More
600 mm width X 50 mm depth X 2.0 mm thickness

18

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
EARTHING STRIP/WIRES

-

-

-

... More
Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

1051

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
Supply & laying 25x5mm GI strip at 0.5mt below ground as strip earth electrode including connection/terminating with GI nut,bolt,spring,washer etc. as required.)jointing shall be done by overlapping &with 2sets of brass nuts bolt spring washer spaced at 50mm)

-

-

-

... More
25mm x5mm

3150

-

-

... More
TOTAL FOR ELECTRICAL WORKS

-

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
NOTE:

-

-

-

... More
I)The AC contractor shall provide fire shunt relay contact in his panel wherever necessary along with auto / manual mode selector switch in the outgoing feeder for AHU Fan, Ventilation & Pressurization fan etc. to take fire input signal (Potential Free Contact). Cost shall be included in the panel price quoted by him.

-

-

-

... More
II) All Equipment listed in BOQ shall be BMS Compatible.

-

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
MGPS WORK

-

-

-

... More
Supply, Installation, Testing and Commissioning of Medical Gases Pipeline System

-

-

-

... More
Oxygen System

-

-

-

... More
6 + 6 size manifold extendable type complete with middle frame with chain for individual cylinder (bulk cylinder D-type) along with Non-Return Valves for every cylinder and copper tail pipes as per Technical Specifications enclosed.

1

-

-

... More
Fully Automatic Control Panel for Oxygen with inlet for Liquid Oxygen Tank, as per Technical Specifications enclosed

1

-

-

... More
1 + 1 Cylinders Emergency Oxygen Manifold with two stage High flow rate regulator with NRV for every cylinder and copper tail pipes as per Technical Specifications enclosed

1

-

-

... More
Terminal Units (Gas Outlets) with probes/Adaptors ,as per NFPA Standard, Technical Specifications enclosed.

60

-

-

... More
Oxygen Flowmeter with Humidifier Bottle as per Technical Specification enclosed

55

-

-

... More
Oxygen H.P Antiastic rubber tube

15

-

-

... More
Nitrous Oxide System

-

-

-

... More
2 + 2 size manifold extendable type complete with middle frame with chain for individual cylinder (bulk cylinder D-type) along with Non-Return Valves for every cylinder and copper tail pipes .

1

-

-

... More
One Cylinder Emergency N2O Manifold with two stage High flow rate regulator with NRV for every cylinder and copper tail pipes .

1

-

-

... More
Fully Automatic Control Panel for N2O .

1

-

-

... More
Terminal Units (Gas Outlets) with probes/Adaptors as per NFPA

1

-

-

... More
H.P Tubing Flexible having antistatic Core as per ISO with Proper colour coded .

35

-

-

... More
Compressed Air System

-

-

-

... More
Compressed Air System including Duplex 36.66 cfm , 2 HP Motor, air cooled, oil free compressors and Air Drier, After Cooler, Moisture Saprater and 1# Air Receiver & Filteration system as per Technical Specification enclosed,

1

-

-

... More
Terminal Units (Gas Outlets) with probes/Adaptors as per HTM/NFPA standard, Technical Specifications enclosed.

-

-

-

... More
For C.Air ( 4 bar)

35

-

-

... More
For C.Air ( 7 bar)

4

-

-

... More
H.P Tubing Flexible having antistatic Core as per ISO with Proper colour coded as per Technical Specification enclosed.

15

-

-

... More
Vacuum System

-

-

-

... More
Duplex V X 15 Vacuum Pumps of Ingersoll with Motor each with receiver vessel, with bacteria filter capacity as per Technical Specification enclosed.

1

-

-

... More
Terminal Units (Gas Outlets) with probes/Adaptors as per HTM/NFPA Standard, Technical Specifications enclosed.

52

-

-

... More
Ward Vacuum Unit with Regulator, Collection Jar of 1000 ml with bracket as per Technical Specification enclosed,

49

-

-

... More
H.P Tubing Flexible having antistatic Core as per ISO with Proper colour coded as per Technical Specification enclosed.

20

-

-

... More
Combined Electrical Control Panel for Compressed Air System and Vaccum System as per Technical Specification enclosed.

1

-

-

... More
Copper Pipes used will be solid drawn, seamless, deoxidized, non arsenical, half hard, tempered and degreased, manufactured as per EN 1057 part I, Table-X of 1971 and chemical composition as per BS-6017 of 1981, Table 2, Cu-DHP.

-

-

-

... More
42mm OD X 1.2mm thk

400

-

-

... More
28mm OD X 1 mm thk

1100

-

-

... More
22mm OD X 0.8 mm thk

1650

-

-

... More
15mm OD X 0.7 mm thk

1475

-

-

... More
12mm OD X 0.7 mm thk

450

-

-

... More
Valves Boxes with Pressure Gauges as per Technical Specifications.

-

-

-

... More
2 Gas Services ( O2, Air 4)

4

-

-

... More
3 Gas Services ( O2, Vac, Air 4)

9

-

-

... More
4 Gas Services (O2,Vac,Air4 & Air7)

4

-

-

... More
Area Alarm as per Technical Specifications enclosed

-

-

-

... More
2 Gas Services ( O2, Air 4)

4

-

-

... More
3 Gas Services ( O2, Vac, Air 4)

9

-

-

... More
4 Gas Services (O2,Vac,Air4 & Air7)

4

-

-

... More
Isolation Valves as per Technical Specifications enclosed

-

-

-

... More
42mm OD

2

-

-

... More
28mm OD

14

-

-

... More
22mm OD

20

-

-

... More
15mm OD

8

-

-

... More
Bed Head Panels

-

-

-

... More
Horizontal Bed Head Panel (Al Extruded) 4 ft. Long Provision for Gas Outlet, Electrical Switch & Socket, Nurse Call, etc

34

-

-

... More
Furniture Work

-

-

-

... More
Providing and Fixing Model Reception and Registration Counter . It is Made of 50mm thick Metal frame and Laminate finish on both side of frame . The Reception Table Frame Height is 1050mm and is provided with a counter top at this Height. Counter Top is running along the Entire Length of Counter and has Depth of 450mm and thickness of 25mm with Corian or solid surface finish as per approval of EIC. The Working top inside the reception table is at 750mm Ht and has 600mm Depth and 25mm thickness. All Table tops and Counter tops are made in PLPB with 2mm PVC edge banding on user side and 0.8mm on other sides. A divider Frame is given every 1050 mm Length till height of 1350mm . Frame is made of 50mm Partition with Laminate Finishing Tile on both sides. Clear Glass 12 mm thick is provided above counter top from 1050mm Ht till 1500mm Height . Glass has polished edges and is fixed with D brackets with Counter Top and and also with Divider frame. Glass is provided with a Suitable cut for enabling transaction over the counter top. 1500mm Ht x 600mm D

4.5

-

-

... More
Each Body Size: 915(W)x450(D)x2080(H) mm Total 08 Nos. of Bodies in Compactor Providing & Fixing Compactor of ht 2080mm. The side, back & top of the box is made of 0.8 thick (22 gauge) prime quality CRCA sheets. The body has independent precision punches slotted strips welded at corners to support the shelves to ensure flexibility in adjusting the height of the shelves. Shelves are made of 0.8mm thick prime quantity mild steel having 8 folds each designed to carry UDL of 60 kgs. The shelf is fixed to the compactor body by means of a support bracket, which facilitates adjustment of shelf as 25mm pitch. System is provided with centralized locking arrangement on the last unit when all the units are brought together, central lock when operated gets locked with the plate which is welded to the rail and does not allow access to the units. The compactors shall consist of single face static unit at one end and double face mobile unit in middle and single face mobile unit at other end with extension of pair of rail for movement of mobile units. The movement of mobile units shall be control with driving mechanism, operated from side with help of driving wheel.

2

-

-

... More
Supplying and placing 6 compartment steel clothes locker, M.S Sheet conforming to commercial quality cr- 1.1980x910x480mm handle with ticket holders six lockers will have internal lock fitting and lockers shall be fitted with hasp and staple of overall sizes of lockers. Body made of 22 gauge CRCA sheet duly powder coated. Front made of 20 gauge CRCA sheet duly powder coated should be compliance with BIFMA,/ANSI/BIFMA-3, Greenguard compliance IGBC & ISO 9001:2015 and ISO 14001:2015.

2

-

-

... More
Model: Arrow, Office Desk Overall Size: 2400Wx2200Lx770H mm. 50mm thick table top made of MDF board with natural veneer work surface with cherry finish veneer same matching veneer edge banding made of same dark cherry P.U. polish. Modesty is designed with leather patch. Side panel made of 40mm thick. * Provision of side unit of size is 900mm(l)x 595mm(d)x 770mm(h), construction of side unit top made of 50mm thick, 1 fixed shelve with 1 sliding shutter. * All the MDF board are is-14587-1998 with confirm to din 68861.iso 9001- 2015 quality certification confirming to ASTM d 4499 standards for viscosity and thermal stability. The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”

1

-

-

... More
Model: Arrow Back Storage Size: 1600Wx400Dx770H mm. providing & suppling placing position of modular back unit top shall be made from 25 mm thick prelaminated particle board/veneer - MDF/steam beech veneer of grade ii type iii of is 12823/latest & confirm to din 68861.iso 9001- 2015. While rest of the sides as well as shelves and shutter to be made up of 18 mm thick prelaminated particle board/veneer - MDF/steam beech veneer P.U. polish. all edges to be provided with same matching veneer edge banding fixed with the hot melt glue Storage unit with 4 shutters construction is 2 openable doors with 1 fixed shelve + 2 openable doors with 1 fixed shelve, in provided with 2 universal cam lock for security and handles are provided for easy of opening. over all height of product is @ 770 mm. Each shutter should be fixed with required numbers hinges, ss tower bolt of 100 x 10, double strip magnetic catcher and drawers shall have 100 mm size ss fancy handles (one on each drawer) with necessary hardware/ fitting/ hinges etc. of approved quality (make: ebco). for installation of side unit wooden dowels and Mini fix to use for additional support. All the MDF board are is-14587-1998 with confirm to din 68861.iso 9001- 2015 quality certification confirming to astm d 4499 standards for viscosity and thermal stability. The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”

1

-

-

... More
Model: Poise, Premium Leatherette Chair, High Back Dimension: 640Wx500Dx1210H mm. Seating Height: 540mm, Seat depth: 500mm, Back Height: 655mm high back 360°-degree revolving chair *The chair made of full leatherette in black colour. it will come in matte finish in contemporary style. details:Arms: fixed chrome finish arms with PU padding.Use of ply: 12 mm thick hot pressed BWR plywood (is grade - 303 for seat and back).Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat, Back: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in back. backrest support foam design based on symmetrical lumbar supportMechanism: centre tilt mechanism.Only seat size is 665mm(l)x 500mm(d)x 580-495mm(h) & the back size is 665mm(l)x 580mm(h),seat maximum height is 635mm & minimum height is 540mm & back height from floor maximum height is 1210mm & minimum height is 1110mmGas lift 85mm telescopic hydraulic.Base: 650 mm shiny chrome base with nylon castors shall be 65.0 +/- 0.5 cm pitch-centre-Dia (75.0 +/- 1.0 cm with castors) The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”

1

-

-

... More
Model: Poise, Premium Leatherette Chair, Low Back Dimension: 625Wx490Dx1135H mm. Seat depth: 490mm, Back Height: 560mm low back 360°-degree revolving chair *The chair made of full leatherette in black colour. it will come in matte finish in contemporary style. details: * Arms: chrome finish arms with PU padding. * Use of ply: 12 mm thick hot pressed BWR plywood (is grade - 303 for seat and back). * Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat, * Back: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in back. backrest support foam design based on symmetrical lumbar support * Mechanism: centre tilt mechanism. * Only seat size is 625mm(l)x 490mm(d)x 660-535mm(h) & the back size is 625mm(l)x 560mm(h) seat maximum height is 660mm & minimum height is 535mm & back height from floor maximum height is 1135mm & minimum height is 1035mm * Gas lift 95mm telescopic hydraulic * Base: 650 mm shiny chrome base with nylon castors shall be 65.0 +/- 0.5 cm pitch-centre-Dia (75.0 +/- 1.0 cm with castors) The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”

6

-

-

... More
Model: Office Desk Table Size: 1500Wx750Dx750H mm. & Side Unit Size: 1050Wx450Dx750H mm. Supplying and placing primary work surface overall size is 1500mm(l)x 600mm(d)x 750mm(h) 25mm thick table top made of prelaminated particle board work surface with the exposed edges shall be finished with 2mm thick edge binding tape of matching colour and shade with the hot melt glue. modesty panel 18made of mm thick. Provision of side unit of size is 900mm(l)x 450mm(d)x 750mm(h), (combination construction wire management hole with PVC grommet on table top, left side table top based on a 18mm thick side panel engineered wood & from right side unit have 2 sliding doors + 1 fixed shelve. Side unit size 900mm(l)x 450mm(d)x 750mm(h), in provided with lock for security and handles are provided for easy of opening. overall construction of side unit is 18mm thick along with facia of sliding shutters. The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and an official link/screenshot of the product listing must be provided from www.bifma.org”

1

-

-

... More
Model: Artline, Premium Mesh Chair, High Back Dimension: 610Wx705Dx1280H mm. * High back 360°-degree revolving chair *The chair made of full mesh in black colour. it will come in matte finish in contemporary style. details:Arms: armrest is having two adjustment heights (up & down).Use of ply: 12 mm thick hot pressed BWR plywood (is grade - 303 for seat).Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat, Back: frame of design shall be curved made of two pieces injection moulded frame cover with mesh. backrest support adjustable lumbar support. Mechanism: self-weighted multi locking mechanism.Only seat size is 500mm(l)x 525mm(d)x 465-565mm(h) & the back size is 440mm(l)x 740mm(h), seat maximum height is 565mm & minimum height is 465mm & back height from floor maximum height is 1280mm & minimum height is 1180mm. * Gas lift 100 mm telescopic hydraulic. Base: 650 mm chrome base with smooth castors. The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”

138

-

-

... More
Model: Artline Cantilever Chair * all over size is : 510mm(l)x 630mm(d)x 990mm(h) , *the chair made of full mesh in black colour. it will come in matte finish in contemporary style. details:arms: pp fixed t shape arms .Use of ply: 12 mm thick hot pressed bwr plywood (is grade - 303 for seat).seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat, back: frame of design shall be curved made of two pieces injection moulded frame cover with mesh. backrest support adjustable lumbar support. only seat size is 500mm(l)x 500mm(d)x 480mm(h) & the back size is 490mm(l)x 560mm(h) ,seat height is @ 480mm. * Fixed cantilever chair. Base: chrome plated tubular frame of cantilever type. The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”

410

-

-

... More
Model: Jeremy Leatherette Sofa A streamlined silhouette and plump cushions make Jeremy one of our most comfortable seating collections. Crafted from family-friendly leatherette, this sofa endures a lifetime. Clean-lined with minimal track arms, Jeremy is a perfect match for compact apartments and big spaces alike. Material & Subtype: Premium Leatherette Frame Material: Plywood,Solid Wood Upholstery Material: Premium Leatherette Seat Material: Premium Leatherette Leg Material: Solid Wood Finish: Matte The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”

-

-

-

... More
Model: Jeremy Leatherette 2 Seater Sofa Size: 1400Wx940Dx895H mm.

2

-

-

... More
Model: Jeremy Leatherette 1 Seater Sofa Size: 800Wx940Dx895H mm.

4

-

-

... More
Model: Cole, Movable Glass Coffee Table Size: 1000Wx1000Dx400H mm. Bit of Both. The Cole Tv Stand is a combination of wood and glass for an elegant setting. Get a matching set along with a choice of a Tv stand or a rectangular center table. Material & Subtype: Engineered Wood - MDF,Glass - Clear Glass Table Top Material: Clear Glass Leg Material: Castors,Glass Finish: Glossy Colour & Colour Family: Clear Glass, Table Top Thickness: 10mm The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”

2

-

-

... More
Model: Ambrose, Veneer Side Table in Dark Oak Finish Size: 600Wx600Dx470H mm. The Ambrose collection emphasizes living spaces with a minimal yet sculptural appeal. This side table showcases the exotic Oak veneer tabletop showing herringbone patterns, skillfully handcrafted by Marquetry artisans. Resting atop tapered solid wood legs, Ambrose is truly timeless. The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”

4

-

-

... More
Model:Smart Series/A Table Size: 1500Wx750Dx750H mm Side Unit Size: 1050Wx450Dx750H mm. providing & supplying modern design modular cabin a combination of metal and wood make the products utile and a delight. Timeless design that elevates your office space table with smart storage side unit structure of spacious l-shaped tabletop offers you a generous workspace, dual-tone design in wenge/frosty white blends. Desk primary work surface use premium quality materials which give more surface area for work, table top made of 25mm thick prelaminated particle board of grade ii type iii of is 12823/latest.Table top supported on mild steel powder coated frontier slanting legs of 50x50 mm thick and connectors for wire management of size 50mm x 25mm horizontal connectors with PVC cap below legs unique designed modesty panel shall be pre laminated board with all exposed edged finished with PVC edge binding. modesty panel-shall be of 25 mm thick Pre-lam particle board , modesty has been given on the front of the main worktop which is attached with gable end baskets on the both end with ,table should have 6 module flip top box without switch & socket single cover with metal wire tray and vertical riser for wire management, on toxic MS powder coated to the thickness 50-60 microns(+/-5 micron) CRCA sheet perforated modesty panel at front side, work surface with the exposed edges shall be finished with 2mm thick edge binding tape of matching colour and shade with the hot melt glue.Side unit: 1050 mm(l)x 450 mm(d)x 750 mm(h),25 mm thick side unit top made of prelaminated particle board, below side unit sliding shutter + 1 fixed shelve storage in provided with cam lock for security and MS press handles are provided for easy of sliding. Easy to maintain / warp and scratch resistant / borer and termite resistant. All metal parts should finish with epoxy polyester powder coated to the thickness 50-60 microns (+/-5 micron). The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”

68

-

-

... More
Model:Smart Series/A Table Size: 1800Wx750Dx750H mm Side Unit Size: 1050Wx450Dx750H mm. providing & supplying modern design modular cabin a combination of metal and wood make the products utile and a delight. Timeless design that elevates your office space table with smart storage side unit structure of spacious l-shaped tabletop offers you a generous workspace, dual-tone design in wenge/frosty white blends. Desk primary work surface use premium quality materials which give more surface area for work, table top made of 25mm thick prelaminated particle board of grade ii type iii of is 12823/latest.Table top supported on mild steel powder coated frontier slanting legs of 50x50 mm thick and connectors for wire management of size 50mm x 25mm horizontal connectors with PVC cap below legs unique designed modesty panel shall be pre laminated board with all exposed edged finished with PVC edge binding. modesty panel-shall be of 25 mm thick Pre-lam particle board , modesty has been given on the front of the main worktop which is attached with gable end baskets on the both end with ,table should have 6 module flip top box without switch & socket single cover with metal wire tray and vertical riser for wire management, on toxic MS powder coated to the thickness 50-60 microns(+/-5 micron) CRCA sheet perforated modesty panel at front side, work surface with the exposed edges shall be finished with 2mm thick edge binding tape of matching colour and shade with the hot melt glue.Side unit: 1050 mm(l)x 450 mm(d)x 750 mm(h),25 mm thick side unit top made of prelaminated particle board, below side unit sliding shutter + 1 fixed shelve storage in provided with cam lock for security and MS press handles are provided for easy of sliding. Easy to maintain / warp and scratch resistant / borer and termite resistant. All metal parts should finish with epoxy polyester powder coated to the thickness 50-60 microns (+/-5 micron). The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”

68

-

-

... More
Back Storage Supplying, and placing in position of back storage as per photograph/drawing . The storage unit having Openable shutters with shelf in it. The modular storage unit top shall be made from 18 mm thick pre-laminated particle board and rest of the sides as well as shelves and shutter to be made up of 18 mm thick pre-laminated particle board while back to be made of 8 mm thick pre-laminated particle board. All edges to be provided with 2 mm thick PVC lipping. The storage unit having openable shutters withD shape handles & locking arrangement. The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”

-

-

-

... More
Back Storage Size: 1500Wx400Dx750H mm.

68

-

-

... More
Back Storage Size: 1800Wx400Dx750H mm.

2

-

-

... More
Model: Cluster Series Office Desk Table Size: 1500Wx750Dx750H mm. & Side Unit Size: 1050Wx450Dx750H mm. Supplying and placing Main Table side combo storage . The Worktop is made of 25mm thick Prelaminated particle board with 2 mm thick PVC Lipping on the edges. The worktop is supported on U Shape Metal Legs 50mm x 50mm , powder coated understructure with Laminate Modesty panel. The Metal legs are connected by Metal Beams for stability and . The Table tops should have metal inserts on underside for modularity. The screw used should be blunt headed and not sharp headed for metal to metal coupling . Colour as per direction of Engineer in Charge. Side Storage unit is made of combination of hinged door unit and 3 Drawer unit - Storage body is made of 18mm thick pre laminated partical Board conforming to IS : 12823. The back of the unit is made from 18mm prelaminated board. All the exposed edges are with 2mm PVC egde Imported banding & sealed edges are with 0.8mm thick PVC Imported edge banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge banding.Storage has adjustable shelves inside and cam lock, tower bolt and locking strips. The units are assembled by knock down fittings such as Minifix & Dowels. TThe Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and an official link/screenshot of the product listing must be provided from www.bifma.org”

67

-

-

... More
Back Storage Size: 1500Wx400Dx750H mm. Supplying, and placing in position of back storage as per photograph/drawing . The storage unit having Openable shutters with shelf in it. The modular storage unit top shall be made from 18 mm thick pre-laminated particle board and rest of the sides as well as shelves and shutter to be made up of 18 mm thick pre-laminated particle board while back to be made of 8 mm thick pre-laminated particle board. All edges to be provided with 2 mm thick PVC lipping. The storage unit having openable shutters withD shape handles & locking arrangement. The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”

67

-

-

... More
Model: Artline, Premium Mesh Chair, Medium Back Dimension: 610Wx630Dx1085H mm. Seating Height: 565mm, Seat depth: 525mm, Back Height: 555mm * Medium back 360°-degree revolving chair * *BIFMA certified chair made of full mesh in black colour. it will come in matte finish in contemporary style. details:Arms: armrest is having two adjustment heights (up & down).Use of ply: 12 mm thick hot pressed BWR plywood (is grade - 303 for seat).Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat, Back: frame of design shall be curved made of two pieces injection moulded frame cover with mesh. backrest support adjustable lumbar supportMechanism: self-weighted multi locking mechanism.Only seat size is 500mm(l)x 525mm(d)x 465-565mm(h) & the back size is 440mm(l)x 555 mm(h),seat maximum height is 565mm & minimum height is 465mm & back height from floor maximum height is 1085mm & minimum height is 995mm. * Gas lift 100 mm telescopic hydraulic.Base: 650 mm chrome base with smooth castors. The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”

67

-

-

... More
Round Stool Overall Sizes Diagonal Leg Dia 538 mm H470 min-655max.SS 202 made sheet with spin section of thickness 1mm & should be non corrosive. It should have a diameter of 305mm,seat base is made of MS ring and rectangular tube.EN8 Screw having dia of 22 mm should be used for height adjustment of the seat base.The hub should be made of MS ERW tube having dia of 38mm and thickness 2 mm. The Hub should be welded with the legs and it should accommodate and cover the lead screw mechanism.The understructure should consist of 4 legs made up of MS ERW tube of diameter 25.4 mm and 1.6mm thick. The press formed pipe leg should give a round & clean look. All the legs should be provided with 4 nos of Nylon-6 bush.All metal components should be pre treated with zinc phosphating in 9 tank process and then powder coated with anti microbial epoxy polyster powder coating . All welding should be Co2 argon welding to minimise rusting on the welding areas.Safe working load must be 135kg. The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”

145

-

-

... More
Examination couch The examination table should be made of sturdy structure with a ratchet mechanism for tilting the backrest .Over all dimension :1830mm(L)X600mm(W)X850mm(H).Leg frame made of MS ERW tube .Leg shoew made of nylon and lying surface of MS Sheet .Ratchet of MS plate .Finishing of powder coating of wpoxy polyester .Max patient weight :135 Kg. The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and an official link/screenshot of the product listing must be provided from www.bifma.org”

135

-

-

... More
Bed Side Locker Over all dimension :402mmLX422mm WX840mm Ht .locker should have one cabinet and one drawer unit .both provided with CAM lock .there should be gap between drawer and unit to keep general items for frequesnt use castors are provided for easy handling .drawer made up of CRCA sheet 1 mm thick and has ball slide for easy operation .Top SS 304 sheet 0.8 mm thick castors 50 mm dia ,Hamdle ABS ..powder coating of epoxy polyester. The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”

163

-

-

... More
Model: Berry/55001, Leatherette Sofa A modern curvaceous silhouette with flared arms and round legs. Wrapped in the comfort of premium leatherette, Berry has been a forever favourite. Material & Subtype: Premium Leatherette Frame Material: Solid Wood Upholstery Material: Premium Leatherette Filling Material: Foam Seat Material: Premium Leatherette Leg Material: PVC Finish: Matte The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”

-

-

-

... More
Model: Berry/55001, Leatherette 2 Seater Sofa Size: 1410Wx890Dx870H mm.

9

-

-

... More
Model: Berry/55001, Leatherette 1 Seater Sofa Size: 960Wx890Dx870H mm.

18

-

-

... More
Model: Hopper, Solid Wood Coffee Table Size: 1130Wx630Dx410H mm. Inspired by the mid-century modern era, the Hopper collection flaunts clean silhouettes with tapered legs. Crafted with solid beech wood, the dark oak finish accentuates the distinctive wood grains. While the clear glass tabletop flaunts the charming wooden accent. The glass tabletop is made with sturdy glass, beautifully bordered by a solid wood frame. Designed for modern Indian homes, it makes a perfect spot to enjoy cozy talks over a cup of coffee. Material & Subtype: Solid Wood - Beech Wood Table Top Material: Clear Glass Frame Material: Solid Wood Leg Material: Solid Wood Finish: Matte Colour & Colour Family: Brown - Walnut The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”

9

-

-

... More
Model: Hopper, Solid Wood Side Table Size: 680Wx530Dx450H mm. Inspired by the mid-century modern era, the Hopper collection flaunts clean silhouettes with tapered legs. Crafted with solid beech wood, the dark oak finish accentuates the distinctive wood grains. While the clear glass tabletop flaunts the charming wooden accent. The glass tabletop is made with sturdy glass, beautifully bordered by a solid wood frame. Designed for modern Indian homes, it makes a perfect spot to enjoy cozy talks over a cup of coffee. Material & Subtype: Solid Wood - Beech Wood Table Top Material: Clear Glass Frame Material: Solid Wood Leg Material: Solid Wood Finish: Matte Colour & Colour Family: Brown - Walnut The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”

16

-

-

... More
Model:Serina Reception Desk Supplying and placing in position of reception desk. 25mm thick table top of prelaminated particle board in asian maple colour. one mobile pedestal (2 drawers + 1 filing cabinet) size is 400 mm(l)x 450 mm(d)x 600 mm(h). The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”

-

-

-

... More
Size: 8800Wx2900Dx750/1050H mm. For Help Desk

1

-

-

... More
Size: 5800Wx900Dx750/1050H mm. For Xray Ultrasound

1

-

-

... More
Size: 2400Wx2400Dx750/1050H mm. For Nurse Station

1

-

-

... More
Size: 3600Wx900Dx750/1050H mm. For Report Collection Xray Ultrasound & CT & MRI & Records

2

-

-

... More
Size: 2400Wx900Dx750/1050H mm. For Report Dispatch Room & Sample Collection Phlebotomy

12

-

-

... More
Size: 6000Wx1800Dx750/1050H mm. For Sub Registration

10

-

-

... More
Back Storage Supplying, and placing in position of back storage as per photograph/drawing . The storage unit having Openable shutters with shelf in it. The modular storage unit top shall be made from 18 mm thick pre-laminated particle board and rest of the sides as well as shelves and shutter to be made up of 18 mm thick pre-laminated particle board while back to be made of 8 mm thick pre-laminated particle board. All edges to be provided with 2 mm thick PVC lipping. The storage unit having openable shutters withD shape handles & locking arrangement. The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”

-

-

-

... More
Size: 750Wx450Dx1200H mm.

106

-

-

... More
Model:Marvel/MB/Premium : Medium back mesh chair Supplying and placing in position of Marvel/MB/Premium : medium back mesh chair in black colour with matte finish . The medium back 360° degre revolving chair with all over size is : W) 595mm X (D) 670mm X (H) 1125mm , the chair made of full mesh in black colour . It will comes in matte finsih about style type is modren. Arms : amrest is having two adjustment heights (up & down) . Use of ply: 12 mm thick hot pressed bwr plywood (is grade - 303 for seat). Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat , Back : frame of design shall be curved made of two pieces injection moulded frame cover with mesh .backrest support adjustable lumbar support. Mechanism : self weighted multi locking mechanism . Only seat size is 500mm(l)x 500mm(d)x 540-440mm(h) & the back size is 480mm(l)x 815mm(h) , seat maximum height is 540mm & minimum height is 440mm & back height from floor maximum height is 1350mm & minimum height is 1250mm . Gas lift 100 mm telescopic haudraulic ; base : 650 mm chrome prong base is 620mm pitch center dia (660mm with castors) . The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”

138

-

-

... More
Model:Nixon/SS/3 Three Seater Waiting Area Chair Size: 1820Wx690Dx790H mm. Supplying and placing in position of a stainless-steel visitor bench. The complete stainless-steel bench has seat & back single section. per seat length is @ 520 mm & seating height is @ 4300 mm from ground, perforated stainless steel. owing to the smooth finish, durability and tensile strength beam stainless steel made by 1.6mm thick. Seat is made by 1.2mm thick stainless-steel border with chrome plating for every seat & back; stainless steel handles chrome plated & die pressed legs at the end of chairs. Gross weight of regular 3-seater will be 34 kg. The steel grade 202 high yield strength as per is:513 & is:304 grade. The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”

1247

-

-

... More
Model:Nixon/SS/2 Two Seater Waiting Area Chair Size: 1200Wx690Dx790H mm. Supplying and placing in position of a stainless-steel visitor bench. The complete stainless-steel bench has seat & back single section. per seat length is @ 520 mm & seating height is @ 4300 mm from ground, perforated stainless steel. owing to the smooth finish, durability and tensile strength beam stainless steel made by 1.6mm thick. Seat is made by 1.2mm thick stainless-steel border with chrome plating for every seat & back; stainless steel handles chrome plated & die pressed legs at the end of chairs. Gross weight of regular 2-seater will be 25kg. The steel grade 202 high yield strength as per is:513 & is:304 grade. The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”

93

-

-

... More
Blood Donor Chair Size: 1100Wx800Dx750H mm. The Chair is a revolutionary furniture piece. It has been designed to ensure maximum comfort and relaxation during your waking hours. The chair is equipped with an adjustable back rest, which can be adjusted by a simple turn of the serrated blocks system. This means that the user can adjust the height of the back rest to the correct position for his/her body length. The chair is also equipped with an adjustable leg rest that self locks in the required position to ensure maximum comfort and relaxation. The back rest is made from steel and can be coated with custom color using epoxy paint. The back rest has been designed as a modular system which makes it easy to replace and repair if ever damaged or broken. The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”

10

-

-

... More
Hospital sheet Patient Attendent Bed Single Function bed which has an adjustable backrest and a fixed lower section. Overall Size in mm : 2268 (L) x 922 (W) x 610 (H) Material Specification : 1. Bed Frame made from (a) MS ERW Rect. Tube of section 30mm x 60mm and thickness 1.6 mm (b) MS ERW Round tube of section 30 mm x 30 mm and thickness 1.6 mm.2. Laying Surface Frame made from MS ERW Round Tube of section 25.4mm and thickness1.6 mm.3. Head Board/Leg Board Frame made from MS Round Tube of section Æ19, Æ25.4 & Æ31.75 mm and Thickness 1.6 mm with Higher diameter tube provides a studay understracture.4. Lead Screw EN8 ACME 6 MM Pitch Thread Rolled En8 Lead Screw,with ACME thread and6mm pitch gives good strrength, with ease of opreation.5. Handle PPCO Snap Locking Handle lever with handle body keep it in folding position when not use.6. Lying Surfaces CRCA 1.0 mm Laying Surface area consists of mattress ratainer to define the position of the mattress. 7. Castors High endurance metal series castor and provided with dual locking arrangement are diagonally placed wheel Dia 125mm & Stem dia is 22mm. Diagonal locking provides better s stability to bed in the locked position.8. Mosquito Net Ple Holder: Privision for mounting of mosquito net pole.9. IV Pole Holder: Provision for mounting of IV pole. The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”

28

-

-

... More
Thickness-Mattress: 3"+ SANDWITCH CONSTRUCTION: Round Hitlon thickness ( MM): 60 Hitlon density (Gm/dcm3): 23 Coir(Both side) Thickness MM: 20 Density (Gm/dcm3): 70, DRC (%): 22 QUILTING - COMBINATION / LAYERS: Pilled Foam – Quilting (One Side) Thickness MM - 14 Pilled Foam Density Gm/dcm3 - 18 PU foam / EPE sheet side walling Thickness MM - 3 TOTAL MATTRESS THICKNESS-MM - 87 REXINE (GSM): 150 Note: * Finish product thickness should be measure from outer to outer surface. Tolerance +5 mm The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”

28

-

-

... More
Model: Office Desk Without Pedestal office desk office desk structure of rectangular shape . Table top 25mm thick table top made of 25mm thick prelaminated particle board work surface with the exposed edges shall be finished with 2mm thick edge binding tape of matching colour and shade with the hot melt glue . modesty pannel made of 18mm thick, wire management hole with pvc grooment on table top. three layer prelaminated particles board(wood product) of grade ii type iii of is 12823/latest. The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”

-

-

-

... More
Table Size: 1500Wx600Dx750H mm.

16

-

-

... More
Table Size: 1200Wx600Dx750H mm.

9

-

-

... More
Table Size: 1050Wx600Dx750H mm.

9

-

-

... More
Model: 65 Series Linear WorkstationWith Drawer Pedestal Overall Size: 9000Wx600Dx750/1200H mm. Size: 1500Wx600Dx750/1200H mm. Each Seat Supplying and placing in position of sliding tile base modular Workstation of 1200mm(H) as per photograph/drawing. Free standing partition height 1200mm and should be minimum of 65-67mm thick. Partition inner frame is 1.1-1.2 mm thick mild steel. Horizontal and vertical trims are made out of extruded aluminum of 1.mm thick. All Panels/trims shall be powder coated with 50 microns. Aluminum trims are elegantly fixed with special fixtures in the partition. The frame work shall be fitted with 9mm thick pre laminated Particle tiles of approved shade. Partition shall have provision for pin up board with fabric/ white marker/ laminated of approved shade. Partition framework shall have adequate provisions for the movement of electric data cables at desired 2 levels; one at skirting and another above / below the table top. The complete partitioning work shall be carried out as per the approved drawing. Tabletop for workstation made up of 25mm thick pre laminated Particle board of approved shade. The worktop shall be supported on minimum 2mm thick powder coated CRCA brackets and side panels. Side’s panels should be made from 18mm thick pre laminated Particle board of approved shade. All working or non working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature Provision of one PVC keyboard tray and Metal CPU trolley with lockable castors for each seating. Also a provision of Pedestal Unit (size:- L-400mm x D-450mm x H-725mm) with a combination of 2 drawer & one filing drawer. The pedestal storage unit shall be made of 18 mm thick prelaminated Particle board with provision of handles & central Locking arrangement. The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”

1

-

-

... More
Model: 65 Series Supplying and placing in position of sliding tile base modular Workstation of 1200mm(H) as per photograph/drawing. Free standing partition height 1200mm and should be minimum of 65-67mm thick. Partition inner frame is 1.1-1.2 mm thick mild steel. Horizontal and vertical trims are made out of extruded aluminum of 1.mm thick. All Panels/trims shall be powder coated with 50 microns. Aluminum trims are elegantly fixed with special fixtures in the partition. The frame work shall be fitted with 9mm thick pre laminated Particle tiles of approved shade. Partition shall have provision for pin up board with fabric/ white marker/ laminated of approved shade. Partition framework shall have adequate provisions for the movement of electric data cables at desired 2 levels; one at skirting and another above / below the table top. The complete partitioning work shall be carried out as per the approved drawing. Tabletop for workstation made up of 25mm thick pre laminated Particle board of approved shade. The worktop shall be supported on minimum 2mm thick powder coated CRCA brackets and side panels. Side’s panels should be made from 18mm thick pre laminated Particle board of approved shade. All working or non working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature Provision of one PVC keyboard tray and Metal CPU trolley with lockable castors for each seating. Free standing partition height 1200mm and should be minimum of 65-67mm thick. Partition inner frame is 1.1-1.2 mm thick mild steel. Horizontal and vertical trims are made out of extruded aluminum of 1.mm thick. All Panels/trims shall be powder coated with 50 microns. Aluminum trims are elegantly fixed with special fixtures in the partition. The frame work shall be fitted with 9mm thick pre laminated Particle tiles of approved shade. Partition shall have provision for pin up board with fabric/ white marker/ laminated of approved shade. Partition framework shall have adequate provisions for the movement of electric data cables at desired 2 levels; one at skirting and another above / below the table top. The complete partitioning work shall be carried out as per the approved drawing. The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”

-

-

-

... More
Model: 65/5x5 C, 2Seater Size: 1500Wx3000Lx600Dx750/1200H mm.

10

-

-

... More
Model: 65/5x5, 1Seater Size: 1500Wx1500Lx600Dx750/1200H mm.

1

-

-

... More
Model: MOD Cafeteria Table Size: 1800Wx900Dx750H mm. Manufacturing supply & Installation of Stainless Steel Dining Table.The top shall be made of SS 304 grade Stainless Steel sheet of min. 1.5mm thick to Easy clean and maintain hygiene, moulded by Hydraulic/ CNC Metal sheet bending machine supported on 4 nos. of legs made of SS 304 grade square tube minimum leg size of 50mm X 50mm X 1.2mm thick. SS Table top shall be supported on 18mm thick commercial ply (laminated on bottom) for strengthening. SS legs should be connected with SS 202 grade connectors/ cross member below the table top of min. size 25mm x 25mm for extra strength. Legs bottom/ ends should be closed with plastic buffers/ caps. The SS table shall be moulded by the CNC Pipe/ tube bending machines, CNC Metal sheet bending machine and SS welding with Robotic Welding Automatic Machines etc. for better finish, durability and aesthetics NOTE: ±10% Variation is allowed in size, if it is standard product with particular Model Name of the OEM / mentioned in the company broachers and rate list. OEM shall display sample of this item as per BoQ, Images & Specifications during Stage-II evaluation. If OEM have any standard model of this item having superior/ rich specification & design better than proposed specification & design of this item and ready to provide in quoted rates against this item, shall be displayed by OEM during Stage-II evaluation. Packing Material : Each Dining Table should be packed in separate cartoons designed for particular model by OEM with proper use of Thermocol, Polythenes and mentioning the name of model & specification on top of cartoons. NOTE: The sample shown at site during Stage-II evaluation, shall get modified by the OEM after award of work without claiming any additional cost, as per the requirement of space in building & client and to improve the aesthetics as per modern / elegant design concept. The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”

15

-

-

... More
Model: COCO, Cafeteria Chair Size: 381Lx419Dx839H mm. Color: Red/Blue/Yellow/Black Pvc Chair - Fixed Arms - Pvc Legs The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”

90

-

-

... More
Model: Auditorium Series With Wooden Tablet Seat size – 440 mm(W) * 475 mm (D), Back size – 460 mm(W) * 775 mm (H), The seat will be auto tip-up type and folds when not in use, Arm type – Individual, Right side arm will be foldable writing tablet (wooden), Left side arm is cup holder. The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & SEDEX. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and BIFMA level an official link/screenshot of the product listing must be provided from www.bifma.org”

120

-

-

... More
Model: Obelisk Podium Size: 550Wx550Dx1200H mm. Providing & supplying vintage podium top & side panels made in 18mm thick prelaminated particle board of grade ii type iii of is 12823/latest with machine pressed exposed edges shall be finished with 2mm thick edge binding tape of matching colour and shade fixed duly pasted with the assistance of edge banding machine at 200 degrees Celsius. The podium houses a flat table top to keep notes handy while allowing for wiring and a stand for mic. the podium design is vintage with fine moulding along the edges of the frame. using a combination of prelaminated particle board obelisk is a fabulous example of a podium setting to deliver speeches and lectures at halls and auditoriums. Three layer prelaminated particles board (wood product) of grade ii type iii of is 12823/latest. The Seller / Company should be ISO-9001:2015, ISO-14001:2015, OHSAS18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, INDIANDESIGN MARK, AIOTA, & FSC Certified. The Bidder should also be a member ofBIFMA and One or more products of the OEM should be certified as BIFMACOMPLAINT as well as BIFMA LEVEL certified and an official productlink/screenshot of the product listing's must be provided from www.bifma.org"

1

-

-

... More
Model: DWS Conference Table Size: 8400Wx1100Dx750H mm. providing & supplying modern design 15-seater conference table, table top offers you a generous workspace, desk primary work surface use premium quality materials. table top made of 50mm thick which give more surface area for work, prelaminated particle board, tabletop supported with 75mm thick (6 mm + filler +6 mm) BSL steam beech veneer with sb-8 polish in brown-wenge colour on prelaminated particle board of grade ii type iii of is 12823/latest. Construction below table modesty height @ 200 mm,15mm thick BSL steam beech veneer with sb-8 polish.in between both the supporting panels length is @ 1480 mm, over all table height is @ 750 mm and the side panel size is 800 mm (l) x 700 mm(h). our work surface furniture is finished with exposed edges shall be finished with 2mm thick edge binding tape of matching colour and shade, fixed with hot melt glue. The Seller / Company should be ISO-9001:2015, ISO-14001:2015, OHSAS18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, INDIANDESIGN MARK, AIOTA, & FSC Certified. The Bidder should also be a member ofBIFMA and One or more products of the OEM should be certified as BIFMACOMPLAINT as well as BIFMA LEVEL certified and an official productlink/screenshot of the product listing's must be provided from www.bifma.org"

1

-

-

... More
HANDRAIL, CRASHRAIL AND CORNER GUARD

-

-

-

... More
Providing & Fixing 150 series high impact resistant surface mount Corner Guard having Vinyl Snap on cover (Lead Free) of .080" (2mm) thickness shall be extruded from chemical and stain resistant polyvinyl chloride with the addition of impact modifiers No plasticizers shall be added (plasticizers may aid in bacterial growth). Surface shall have a Pebblette texture for scratch resistance. Continuous Aluminum Retainer of .070" (1.8mm) thickness shall be fabricated from 6063-T5/T6 aluminum, with a mill finish. Dimensions to be of 3" (76mm) x 3" (76mm), 90 degree. The rigid vinyl profile shall resist an Impact Strength of 30.2 ftlbs/ inch as per ASTM D-256-90b and shall cis not support fungal or bacterial growth inaccordance with ASTM G-21 and G-22. The system shall also conform to class A fire rating and ASTM D-543 for chemical and stain resistance. It shall include standard quantity, as per manufacturer, of Molded Top / End Caps.

1057.5

-

-

... More
Providing and fixing 700 series superior impact resistance Wall Guard Vinyl (Lead Free) Snap on cover of .080" (2mm) thickness shall be extruded from chemical and stain resistant polyvinyl chloride with the addition of impact modifiers. No plasticizers shall be added (plasticizers may aid in bacterial growth) cis. Surface shall have a Pebblette texture for scratch resistannce and Continuous aluminum retainer of .080" (2mm) thickness shall be fabricated from 6063-T5/T6 aluminum, with a mill finish. Dimensions to be of 7 3/4" (197mm) height x 1" (25mm). Inner snap-on vinyl impact black bumper of .080" (2mm) thickness x 3.930" (100mm) width x 21mm height which shall be extruded from chemical and stain resistant unplasticized polyvinyl] chloride (uPVC). The system shall resist an Impact Strength of 45.5 ft-lbs/inch while producing no visual blemishes upon the vinyl cover surface and no deformations in the aluminum retainers, as tested in accordance with applicable provisions of ASTM F 476-84, paragraph 18, Impact Test and shall not support fungal or bacterial growth inaccordance with ASTM G-21 and G-22. The system shall also conform to class A fire rating and ASTM D-543 for chemical and stain resistance. It shall include standard quantity, as per manufacturer, of Molded End Returns.

1566

-

-

... More
Providing and fixing 3110 series Handrail with integrated vinyl wall guard having Rigid Vinyl Snap-on cover (Lead Free) of .080" (2mm) thickness extruded from chemical and stain resistant unplasticized polyvinyl chloride (uPVC) with the addition of impact modifiers. No plasticizers shall be added (Plasticizers may aid in bacterial growth). Surface shall have a pebblette texture for scratch and stain resistant with rigid vinyl cover mounted on a sturdy continous Aluminium Retainer of .080" (2mm) thickness that shall be fabricated from 6063- T5/T6 Aluminium with a mill finsh. Dimesnions to be 6-1/8 " (155mm) height x 1-1/2" (38mm) full round gripping diameter, system extends 3-1/8" (79mm) from the wall. Integrated vinyl cover, 4" (101mm) high. Inner snap-on vinyl impact black bumper of .070" (1.8mm) thickness and 2-1/4" (57mm) high shall be extruded from chemical and stain resistant unplasticized polyvinyl] chloride (uPVC). The system shall resist an Impact strength of 45.5 ft-lbs/inch while producing no visual blemishes upon the vinyl cover surface and no deformations in the aluminum retainers, as tested in accordance with applicable provisions of ASTM F 476-84, paragraph 18, Impact Test cis. The rigid vinyl shall not support fungal or bacterial growth inaccordance with ASTM G-21 and G-22. The system shall also conform to class A fire rating and ASTM D-543 for chemical and stain resistance. It shall include standard quantity, as per manufacturer, of Molded Mounting Brackets / End Returns.

1566

-

-

... More
BUILDING MANAGEMENT SYSTEM

-

-

-

... More
IP DIGITAL CONTROLLERS, INTEGRATOR, SOFTWARE :

-

-

-

... More
BACNet IP/ (open Protocols) Direct Digital Controllers with minimum of 12 I/O points, The controllers shall be, UL and BTL certified (vendor shall submit BTL UL certified, CE listed Certificate) with 32 bit microprocessor, real time clock, calendar & programmable memory with year month day, real time clock & 1 second scan time. DDC work on 230VAC / 24V AC/DC are preferred, The Controller shall have built-in Ethernet ports as per technical specification. The networkable DDC's shall be capable of peer to peer communication with lockable MS mounting cabinets duly powder coated connector strip, controller / router / system interface controller / PC and shall communicate with the building LAN directly, internal wiring and space to house controller & relays, connector strip step down transformer, MCB, internal wiring. (Contractor shall confirm his I/O provision w.r.t requirement on basis of data point) on ASHRAE approved BACNet protocol only as per IO Summary. The Controller shall have built in memory to save graphics & logic for the connected points. The each controller shall have minimum 15% spare IO capacity, Multiplexer (Mux) / AI to DI / DI to AI not acceptable.

-

-

-

... More
DDC controller for chiller plant, primary pumps, secondary pumps, condenser pumps, cooling tower, heat pump, heat generator

12

-

-

... More
DDC controller for AHU, HRU & TFA

52

-

-

... More
DDC controller for ventilation

20

-

-

... More
DDC controller for PHE

6

-

-

... More
DDC for electrical

3

-

-

... More
Supply, installation, testing and commissioning of  UL-916 certified, BTL/CE listed certified, Hardware Bacnet IP (open Protocols) Integration units, to connect individual 3rd party microprocessor system controllers like  Chillers & fans etc. the unit shall be capable of integrating all mentioned devices on BACnet, Modbus & LON etc.as per distribution given below :

-

-

-

... More
Integration unit for Chiller, cooling tower, Pumps, AHU, FCU, WTP, STP, RO, ELE, UPS & lift with 15% spare point as attached I/O point summary.

15

-

-

... More
Supply, installation, testing & commissioning of DALI/KNX/other gateway which shall connect the cross-function communication bus with the DALI/KNX/othe bus designed exclusively for lighting control. Luminaries with DALI electronic ballasts can therefore be integrated into a bus complete system in the form of a subsystem and operated by a wide range of available devices. ii. The gateway shall serve as the DALI/KNX/othe master and power supply for the connected electronic ballasts. Up to a maximum of 128 electronic ballasts according to IEC 60926 in a total of 16 groups can be switched, dimmed or set to a defined value. iii. Brightness values or error messages in the DALI/KNX/othe devices can be sent to the BUS and visualized on display units. iv. The DALI is commissioned and configured with the integrated display and operator buttons. v. DALI commissioning and configuration shall be performed as follows: a. via the device b. via a software tool (free of charge) c. via the integrated web server d. via a portable web panel or a PDA e. via two binary inputs, e.g. for connecting push-buttons to the device (building site operation).

1

-

-

... More
Supply installation testing and commissioning of DALI/KNX/othe programmable keypad with customized programming, with proximity sensor in built, flush device mounting, with 4 function keys, Night mode: LEDs light up with reduced brightness, Scene saving, Behavior and brightness of the status displays, Backlit symbols, should be with Push-button customizable from 1 to 4 operating buttons and status display and suitable for switching, toggling and dimming.

-

-

-

... More
Supply, installation, testing & commissioning of DALI/KNX/othe Power supply, of DC 30V for one line with up to 64 devices. With integrated choke to decouple the power supply from the bus, as well as switches to interrupt the power supply and reset the bus users connected to the line. It is short-circuit resistant, and features a voltage and current limiter. Excessively high output currents are indicated by a red display (over current). The input power supply shall be rated at 220V AC frequency 50 Hz.

-

-

-

... More
Supply, installation, testing & commissioning of DALI/KNX/othe logic controller which allows to connect different standards and protocols for building automation and energy metering. based on a web server application. Advanced logic functions are possible in order to optimize energy efficiency and comfort. event controller, which sends a notification/message in case of any failure or issue. IP connection for communication in BACnet server, Modbus and web services. Modbus serial port links to any devices. RS232 connection to control any serial communication compatible components. Support event-based scripts, Scheduled scripts, Resident function scripts & Scripting repository and built-in helpers.

-

-

-

... More
Supply, installation, testing and commissioning of the web Based Graphical Software with unlimited multi user with simultaneous minimum 1 user Web Based Graphical Software meeting the requirements in the Given I/O Summary  and technical specifications including configuration and facility to create / provide the graphic mapping for all I/O Summary points , animate the Graphics, Navigation between pages, display of logs, changing the time zones, popup alarms,  configurable password protection for Building  Mgmt System as per Specifications.  Software shall be able to communicate with open protocols like BACNet, Modbus devices simultaneously. Offered software shall have builtin feature for EMS, Alarming, reporting, scheduling & trending. The software shall have unlimited software & Hard ware capacity. During operation & maintenance if any controllers required to replace than software shall have feature to download logics in new controller as of old one, from control station, once the old controllers ip is maped in new one.

1

-

-

... More
The hardware viz., GSM modem etc., and required software for SMS alert on mobile phones shall be included with PC hardware and BMS software.

-

-

-

... More
Commissioning of Energy Management Dashboard & Report shall be done from the BMS graphics software, The Data Into Separate Application Database (SQL Server) for Analysis shall be created, System Should Have The Following Key Features: This Software should have the following Key features: A) Energy Management - 1. Data monitoring and reporting in real time no delay with 2min. 2. Energy Dash-Board shall be Customizable. 3. Energy Report Generation and all kind of report of meters Against Selection of Time And Frequency. 4.Energy breakdown and consumption patterns for DG & grid supply 5.Should have the compatibility to set energy consumption targets, alarm and pricing. 6.Should have the compatibility to compare historical trends, benchmark data 7. Web Enabled. 8.Email / mobile SMS Option Available 9. Multiple Database Sources / Site Can Be Integrated. 10. Trends and previous History can be generated (The bidder has to provide the proof of Evidence to meeting the above requirments & Reports generation as per mentioned into the Data Point Summary & Technical Specification).

-

-

-

... More
B) Water Management - 1. Data monitoring and reporting in real time no delay with 2min. 2. Water meter Dash-Board shall be Customizable. 3. Water meter Report Generation and all kind of report of meters Against Selection of Time And Frequency. 4.Water meter breakdown and consumption patterns. 5.Should have the compatibility to set water consumption targets, alarm and pricing. 6.Should have the compatibility to compare historical trends, benchmark data 7. Web Enabled. 8.Email / mobile SMS Option Available 9. Multiple Database Sources / Site Can Be Integrated. 10. Trends and previous History can be generated (The Bidder Has To Provide The Proof of Evidence to Meeting The Above Requirements & Reports Generation As Per Mentioned Into The Data Point Summary & Technical Specification and software shall be meet the requirement required by ISO and UL).

-

-

-

... More
Hand held Portable Operator Terminal

1

-

-

... More
SUPPLY, INSTALLATION, TESTING, COMMISSIONING OF INPUT AND OUTPUT SENSOR AS FOLLOWING :-

-

-

-

... More
Should be UL-916 certified, CE listed.

-

-

-

... More
Should have individual serial numbers with certificate.

-

-

-

... More
Should have the site traceability scalibration and validation.

-

-

-

... More
Should be of the same make to ease installation, commissioning and post handover services.

-

-

-

... More
Should have manufacturers’ sales and service office in India mandatorily.

-

-

-

... More
Certificate and test copies to be submitted for approval.

-

-

-

... More
Immersion sensors shall be provided with a separable stainless steel thermowell with suitable threaded connection with ½” NPT (M) connection with length of 5”, sensor shall have rigid 6.35mm (0.25”) diameter stainless steel probe with minimum length 50mm 2” and various length as per site condition with holding pressure rating of 10 kgf/sq cm consistent with the system pressure installed with measuring range 32-160 deg f, sensor shall be provided with suitable mounting kit, sensor shall have accuracy ± 0.3 deg. operating temperature of the sensor shall be -20 to 105°C (-4 to 221°F)

104

-

-

... More
Duct mounted pressure Sensor provided across air for indicating the air pressure with 0-2000pa field-adjustable, sensor shall have response time of minimum 250ms or better with accuracy 1%, output 4-20ma, 0-10vdc, sensor shall be offer UL94-5VB, IP54 approved housing, withstand ambient temp of -0ᵒC to 70ᵒC.

43

-

-

... More
Water pressure transmitter provided across water for indicating the water pressure with a zero and span field-adjustable, sensor shall have SS316 diaphragm construction and SS316 body for static pressure 5X, transmitter also have range of 0-10 Bar (2.9 to 300 PSI) with accuracy ±0.5%, voltage rating shall be minimum of 3A @ 230VAC inductive 0.1 Amp @ 230VDC, sensor shall be offer UL/CE #E85974 approved, withstand ambient temp of -20degC to 70degC.

20

-

-

... More
Water level switch for indication high and low level of tank, sensor shall be offer UL/CE #E85974 approved, withstand ambient temp of -20degC to 70degC.

9

-

-

... More
Water transmitter for indicating two type of level (H/L), sensor shall have stainless steel enclosure SS316L wetted parts corrosion protected, sensor should sense the pressure minimum of 2 bar with + 0.25% accuracy and + 0.5% error correction sensor shall have IP 68 protection with minimum of 10mtr corrosion resistant Cable, sensor shall offer UL/CE listed.

17

-

-

... More
Over flow Indicator shall be provided to measure the over flow at water tank with ABS plastic body IP 66/68 protected, 9V-0-9V AC at 300 mA operated with 1 output relay to transmit the signal to DDC controller.

4

-

-

... More
Differential Pressure Switch provided across water for indicating the water flow range of 0.2 to 4.5 Bar (2.9 to 65.25 PSI), sensor shall be capable to withstand static pressure of 12 bar and temperature of 100°C. The repeatability should be ±2% or better. Contact rating shall be minimum of 5A 220VAC + 10%, enclosure shall have IP54 Protection with option of Direct and Panel Mounting.

56

-

-

... More
Differential pressure switches across the Air for indicating the Blower status, Pressure differential – 4–40 mm. The switch shall be with connecting tube and metal bends for connections to the duct. The housing shall be IP 54 rated.

75

-

-

... More
Differential pressure switches across the filter for indicating the filter status, Pressure differential – 4–40 mm. The switch shall be with connecting tube and metal bends for connections to the duct. The housing shall be IP 54 rated.

75

-

-

... More
Differential pressure transmitter across air for indicating the pressure with a zero and span field-adjustable, sensor shall have SS316 diaphragm construction and SS316 body for static pressure 5X, transmitter also have range 2.9 to 300 PSI) with accuracy ±0.5%, voltage rating shall be minimum of 3A @ 230VAC inductive 0.1 Amp @ 230VDC, sensor shall be offer UL/CE #E85974 approved, withstand ambient temp of -20degC to 70degC.

4

-

-

... More
Duct mounted temperature sensor provided across air for indicating the air flow, sensor probe length shall be sutaible for duct mounted minimum of 1ft per ft² of duct, the sensor road shall be Pt 1000 sensing element with SS304/SS316/iNTC20K stemshall be of copper sheathed construction, sensor shall have temperature accuracy of ± 0.3ᵒC, sensor with fireproof ABS housing & UL94-V0 - IP65 (NEMA 2) and Housing shall be suitable for duct application, Operating Temperature of the sensor shall be -20 - 60°C (-4 - 140°F).

71

-

-

... More
Outside T+RH shall be provided with fireproof ABS weatherproof housing rigid sensors sensor with UL94-V0, IP65/66 Pt 1000 elements sensor to be laser trimmed thermoset polymer based capacitive type and 24 VAC/DC operated, sensor shall have 4-20 mA/0-10 Vdc or 0-5 Vdc field selectable output proportional to relative humidity range of 0-100% with BMS compatibility, sensor elements shall be NTC 20k or Pt1000 with ±0.3°C accuracy 2% RH accuracy 5-95%, operating temperature of the sensor shall be - 40°C to 85°C (-40 to 185°F), zero and SPAN adjustment facility available, and 60 micron HDPE filter protects the sensor for contaminants sensor shall offer UL/CE listed.

1

-

-

... More
Duct mounted PM2.5 sensor with sensing range 0-500 ug/m3 ±10%, with sensing optical laser sensor to responded directly DDC 1sec, outputs of sensor shall be 4-20 mA/ 0-10VDC or Modbus RS485, sensor enclosure shall be IP65 for duct or IP32 for Wall Mount with UL94V0 fireproof enclosure, Operating temperature shall be 0 to 50 deg C with 0 – 99% RH (Non-condensing).

43

-

-

... More
Carbon monoxide (CO) sensor wall/duct mounted shall be provided with electro chemical type with range of 0-250 ppm with 5% accuracy, coverage of CO sensor shall be greater than 465 m2, sensor shall have 4-20 mA or 2 – 10VDC output, Sensor shall be ANSI/UL-2034, UL-2075, E240671UL/CE certified, operating condition of sensor shall be -10°C to 50°C with fire retardant ABS UL94-V0 enclosure.

10

-

-

... More
H2 sensor for detecting hydrogen below 1% during batteries charge

2

-

-

... More
Flame proof Differential Pressure Switch provided across pump for indicating the oil flow range of 0.2 to 4.5 Bar (2.9 to 65.25 PSI), sensor shall be capable to withstand static pressure of 12 bar and temperature of 100°C. The repeatability should be ±2% or better. Contact rating sahll be minimum of 3A 220VAC + 10%, enclosure shall have IP65 Protection In Diecast Aluminium Enclosure with option of Direct and Panel Mounting.

2

-

-

... More
Flame Proof Flow Meter shall be a single electro-magnetic type inline flow meter able to work in conductivities above 5μS, meter shall be constructed of stainless steel with PTFE Lining and electrode titanium material with Die cast aluminium IP67 Enclosure and LCD Display, flow meter shall have the accuracy + 0.5% with velocities from 3 to 30 fps, flow meter shall have output 4-20mA Signal and MODBUS simultaneously, Flowmeter shall have the mandatorily of units l/m, l/h, m3/m, m3/h, gpm/h, gpm/m.

4

-

-

... More
Flame Proof level transmitter elements shall withstand continuous operating conditions plus or minus 50% greater than calibrated span without damage, sensor shall have SS316L / PTFE wetted parts, proof pressure of 10 bar and burst pressure of 20 bar minimum, sensor shall be complete with 4-20 mA output, with over voltage protection. The accuracy shall be ±0.25% or better. The total error band shall be ±0.5% or better, transmitter shall have explosion proof enclosure IP67 protection with CCOE / Equivalent.

1

-

-

... More
Flame proof level switches shall have SPDT Contacts, level switch shall be Float operated, with top mounting, level switch shall have SS316L flameproof probe switches proof pressure of 10 bar and burst pressure of 20 bar Minimum, accuracy shall be ±0.5%, switch shall have IP68/67 protection,with corrosion resistant cable SS316L Probe, switch shall be 15A, 230VAC, Fire retardant ABS enclosure.

5

-

-

... More
Flow Meter shall be a single electro-magnetic type inline flow meter able to work in conductivities above 5μS, meter shall be constructed of stainless steel with PTFE Lining and electrode titanium material with Die cast aluminium IP67 Enclosure and LCD Display, flow meter shall have the accuracy + 0.5% with velocities from 3 to 30 fps, flow meter shall have output 4-20mA Signal and MODBUS simultaneously, Flowmeter shall have the mandatorily of units l/m, l/h, m3/m, m3/h, gpm/h, gpm/m.

1

-

-

... More
British thermal unit meter shall be provided for measuring BTU/Hr or KW Configurable of water thermal energy totalizer with 0.02+ or 0.05% accuracy , The Flow meter shall be IP 67 protected and the Display Unit shall be IP 54, BTU meter shall have RS-232/485/MBUS communication port for third part integration and inbuilt storage capacity of energy minimum of 15 days after communication beak with CPM/BMS system, The BTU Meter should work on Batteries with a minimum life of 5 years. Remote display with minimum 5 meter cable with option of mounting it on the meter, Operating temperature of meter shall be 1ᵒC to 90ᵒC & 95% RH Non condensing.

1

-

-

... More
Current relay shall be provided with fireproof ABS/PC enclosure, input and output isolation via current transformer, accuracy 2% of full-scale max, temperature rating of –150C to 500C (5 to 122 °F) UL94 V-0, response time of relay shall be 200 ms typical or less, relay shall be UL/CE listed.

113

-

-

... More
Communication thermostat compatible with hot & cold coil

24

-

-

... More
CONDUITING , WIRING AND CABLING :

-

-

-

... More
Supply installation testing & commissioning of Unarmoured shielded twisted pair 2C x 1 sqmm FRLSH cable for field sensor signals, bare copper conductor not less than 14AWG and for 50Vpower, outer sheath black colour. 300/500 volts, including end terminators, saddles, clamps with screws etc. for fixing on wall/ceiling or on cable trays complete as required complete as required with all mounting accessory for data communication.

24669

-

-

... More
Supply installation testing & commissioning of Unarmoured shielded twisted pair 4C x 1 sqmm FRLSH cable for field sensor signals, bare copper conductor not less than 14AWG and for 50Vpower, outer sheath black colour. 300/500 volts, including end terminators, saddles, clamps with screws etc. for fixing on wall/ceiling or on cable trays complete as required complete as required with all mounting accessory for data communication.

12334.5

-

-

... More
Supply installation testing & commissioning of Unarmoured shielded twisted pair 3C x 1.5 sqmm FRLSH cable for Powering DDC, Actuators., bare copper conductor not less than 14AWG and for 50Vpower, outer sheath black colour. 300/500 volts, including end terminators, saddles, clamps with screws etc. for fixing on wall/ceiling or on cable trays complete as required complete as required with all mounting accessory for data communication.

1913.6

-

-

... More
Supply, installation, Testing & Commissioning of 4pair 8wire color identification, 22-26 AWG, solid copper conductor unshielded un-armoured cat-6 cable along with RG-45 connector for DDC controller and integrator comply with ANSI/TIA-568/569-B/C, the storage temperature of cable shall be -10ᵒC ~ +60ᵒC, operating temperature -5ᵒC - +70ᵒC Complete with all mounting accessories required for completion.

2516.83

-

-

... More
Supplying, installing and jointing of MS/GI conduits/flexible conduit on surface or concealed complete with MS junction boxes, cover plates, MS bends, GI saddles, base and other accessories all made in MS with GI screws as required to complete the job. Exposed conduite shall be painted with red enamel paint for identification.

-

-

-

... More
25mm MS conduit

18501.75

-

-

... More
25mm GI conduit

1850.18

-

-

... More
20mm MS conduit

185.02

-

-

... More
20mm GI flexible conduit

3228

-

-

... More
CENTRAL CONTROL STATION:

-

-

-

... More
Supply, installation, testing & commissioning of the central control station consisting of the following :

-

-

-

... More
BMS Server: Xeon E5-1650 v3 Processor, Memory of 32 GB, 8x 1TB Professional / Enterprise HDD, 2 GB Graphic card of Resolution 2560 x 1600 with Onboard Intel 4600 HD, Microsoft Windows 10 or above 2008 R2 64 bit pre-installed Embedded Server OS, Redundant power supply etc. 10/100/1000 Mbps Ethernet card, USB connection & internal modem, Enterprise MS office, Web server software, DVD-ROM Drive (with RAM), 100/1000 Mbps NIC for Network connection and anti virus software with 20" colour graphics LED monitor. Accessories included Optical Mouse, Key Pad, A4 B/W printer with the above BMS System configuration.

1

-

-

... More
BMS workstation - i7-7920HQ 3.93GHz Processor 8mb cache memory, 16GB RAM, 1TB HDD SATA Drive extendable upto 16 TB, Windows 10 or compactable with BMS software, DVD R/W, Integrated Intel HD graphics 530 and NVIDIA Quadra NVS 315 1 GB PCIE x 16 LP supporting 4 Monitors, LAN/Ethernet :2 x 1Gbit CNA via Midplane to Ethernet Connection, with 27" LED Monitor with HDMI port

2

-

-

... More
Notes:

-

-

-

... More
1 AHU per controller shall be programed, controller shall have minimum of 12 Input/output points and further it can be increased based on selection of DDC and as manufacturer recommendation as approved IO summary.

-

-

-

... More
Above indicated cable quantity tentative, contractor need to calculate cable during submission, the actual quantity of cable shall be as per the selection of DDC configuration, the contractor to confirm the quantities before quoting the job. Incas of any variation during execution, the vendor shall bear the cost.

-

-

-

... More
2&4x1.5sqmm cable for field devise is consider 25mtr per hard point and 3mtr per soft point and cat-6 15mtr per DDC & 5 mtr/Integrator.

-

-

-

... More
Each DDC/integrator shall have minimum of 15% spare points for future expansion, If I/O point quantity may get revised during finalizing/commissioning of BMS tender that can be capture during execution without additional cost implication to client.

-

-

-

... More
List of approved makes shall be refer for submission, if any deviation the contractor shall inform before submission.

-

-

-

... More
All historical data log/events of BMS system shall be maintained minimum 365 days. Data should be saved in hard drive design for BMS and hard drive backup shall be taken before it expire and data backup should be kept at least minimum of 1825 days.

-

-

-

... More
All controllers/integrator offered by BMS contractor shall be UL/FM&BTL listed and BIS approved.

-

-

-

... More
Contractor shall submit his/her offer along with Catalogues of controllers / integrators / field devices of the product defined in make list and individual item model no.

-

-

-

... More
Contractor shall provide schedule of all items in a format indicating the make and model & listing of the component UL/EN/FM/BIS approved.

-

-

-

... More
Procurement of equipment shall be done after approval of equipment technical data sheets, if and deviation found the contractor need to replace the equipment without any extra cost to client.

-

-

-

... More
Procurement of cable shall be done after approval of shop drawing.

-

-

-

... More
Quantity of cable/conduits shall be on running meter, vendor to confirm the quantities before quoting the job. Incase of any variation is during execution, the vendor shall bear the cost.

-

-

-

... More
Quantities shall be checked at site and approval shall be taken from the site Engineer/charge before procuring the materials.

-

-

-

... More
“SLD is provided for reference only & for minimum consideration”. Actual work shall done on contractor approved shop drawings.

-

-

-

... More
Contracotr shall make sure that supplied system is compatible with system.

-

-

-

... More
All equipment, components etc (for e.g. DDC, Integrator and devices Fiber cable, UTP cable, L2 switch, LIU, Cable tray, Cable terminations, etc.) should be compatible to operate in the environment having gases like "Hydrogen sulfide, ammonia, methane, esters, carbon monoxide, sulphur dioxide and nitrogen oxides etc", without any impact on the life of the same, contractor should consider the all safety easure/precautions/ambient conditions while quoting.

-

-

-

... More
Biomedical Waste Disposal WORK

-

-

-

... More
SITC of Bio Medical Waste management system should chamber volume Capacity 300-500 liters. The System should be based on MACS Technology. Microwave Assisted Cold Sterilization which disinfects/ sterilizes the hospital by-products at 70oC using the dielectric principle of non-contact irradiation process, which directly hits the bacteria/ fungi/ viruses/ spores vacuoles (which contain the largest water content) vibrating it so rapidly that it creates friction and ruptures the cell-wall of the bacteria/ fungi/ viruses/ spores vacuoles. As per technical Specification document.

1

-

-

... More
Integrated Online Waste Shredder (20 Kg / hr.): Supply, installation, testing & commissioning of Waste Shedrer Capacity : 20 Kg/hr Number of Blades : 10 (Stainless Steel) Feed Width : 250 X 280 mm Blade Length : 250 mm Number Of Motors : ONE Rotor Diameter : 150 Throat Size : 250 X 280 Sieve Hole Size : 12 mm Control Panel : YES Speed of Rotor : 100 RPM Automation : Semi-Automatic

1

-

-

... More
SIGNAGES

-

-

-

... More
Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions. Sign is single sided with 1 aluminium profile click fitted on 2 plastic moulded endcaps.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.Door/Wall.400 x 125 x 12mm

642

-

-

... More
Providing a signs made as using Cosign India make Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions.Sign is double sided 50 mm depth profile with media accomodation depth of 6 mm media of ACP acrylic upto 5 mm thickness can be pasted directly on frames or attched on frame with help of dual lock tape.Sign can be edge lite with help of edge lite led modules ,led of LUCOLED make EL31 , fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.Ceiling1200x300x50mm

15

-

-

... More
Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions. Sign is single sided with 1 aluminium profile click fitted on 2 plastic moulded endcaps.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.Door/Wall.v300 x 125 x 12mm

215

-

-

... More
Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 Years warranty under normal working conditions.Sign is double sided with 2 aluminium profiles connected with each other with 2 plastic moulded endcaps.Galvanised iron multistrand twisted 2 mm diameter wire (upto1.5 meter in length) with Stainless steel eco-suspension clips screw fitted directly in ceiling (rigid base) engaged with wire stainless steel eco suspension clips with wire adjustment mechanism.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.Ceiling.600x187x20mm

32

-

-

... More
Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 Years warranty under normal working conditions.Sign is double sided with 2 aluminium profiles connected with each other with 2 plastic moulded endcaps.Galvanised iron multistrand twisted 2 mm diameter wire (upto1.5 meter in length) with Stainless steel eco-suspension clips screw fitted directly in ceiling (rigid base) engaged with wire stainless steel eco suspension clips with wire adjustment mechanism.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.Ceiling.1200x187x20mm

90

-

-

... More
Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions.Sign is single sided with aluminium side tracks and common click clips for panel fitting. a.Sign is including all plastic injection moulded clips black in shade which are slided in side tracks ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.Wall.1000x2000x15.mm

1

-

-

... More
Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions.Sign is single sided with aluminium side tracks and common click clips for panel fitting. a.Sign is including all plastic injection moulded clips black in shade which are slided in side tracks ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.Wall.750x1500x15

42

-

-

... More
Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions. Sign flip profiles with 32 mm visible border.Sign has high quality plastic moulded base with slightly flexible in nature, with wall mountiing screw position hidden beneath the flip profiles. and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.Wall.451x625x20mm

156

-

-

... More
Providing a signs made as using Cosign india make .Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet)with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions.Sign is single sided with aluminium profile click fitted on 2 plastic moulded endcaps.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media (vinly) warapping by virtue of design of profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.Wall/Door.156x156x12mm

66

-

-

... More
Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions. Sign is single sided with 1 aluminium profile click fitted on 2 plastic moulded endcaps.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.Wall/Door.450x156x 12

27

-

-

... More
Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions. Sign is single sided with 1 aluminium profile click fitted on 2 plastic moulded endcaps.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.Wall/Door.300 x 125 x 12mm

26

-

-

... More
Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with10 years warranty under normal working conditions.Sign is single sided with 1 aluminium profile click fitted on 2 plastic moulded endcaps.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.Wall.250x187x12

98

-

-

... More
Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with Lifetime warranty under normal working conditions.Sign is single sided with 1 aluminium profile click fitted on 2 plastic moulded endcaps.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.Wall.350x 156 x 12mm

98

-

-

... More
Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions.Sign is single sided with 1 aluminium profile click fitted on 2 plastic moulded endcaps.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.Wall.300x156x12mm

53

-

-

... More
Providing ready sign & fixing at location a Cosign make emergency exit sign- illuminated, surface mount (wall or ceiling) Dual sided made up of plastic material , battery backup of 3 hours (180 mins) .Battery life of 300 cycles of charge & discharge Li- ion battery 3.7 Volt, 100 mA, Charge time of 24 hours. Input voltage 220-240 Volt A.C, 50/60 Hz. Viewing distance 30 meter, degree of protection IP20 (rating for protection against solid object upto 12 mm) white light colour full back (white colour) LED illumination with green white coloured graphic inserted on both sides on 0.4 mm PC (sizes, texts, symbols or graphics as per standard safety norms & regulations) graphic options of -left ,right, up staircase down staircase. Test facilty button self test plus auto self test, opreration in maintained and non maintained mode (power saver mode).Sign with 12 months warranty for electric circuit & 6 months warranty for battery. Sign provided with dual mounting arrangement of mounting on wall & celing both ( with flat rigid support/base).Sign is including all connection wires (upto 1 mtr) & high tensile strength zinc coated self tapering screws (4 nos with screw wall plastic packing), installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.Ceiling.310x225x55mm

75

-

-

... More
Providing and fixing the LED backlit sign shall comprise of a logo of required and channel letters in required fonts of Hindi and English in specified Font Height depicting the name fixed on either side of the logo supported on a rigid supporting system in steel. Channel letters will be made out of 2mm thick Aluminum sheet to make it 3D Channel letter and front face of channel letter/logo will be fully covered with 5mm clear/frosted acrylic sheet which will be further fully covered with 3M vinyl film with UV printing of desired shade as approved by engineer-in-charge and internal lighting arrangement in channel letter will be using LEDs LUCOLED complete. The signage should be free from hot spots and may have a diffuser film in order to achieve a desired effect. Providing necessary supporting system comprising of mild steel members of required size and lengths as per drawings. Polyurethane painting of the MS angles, MS tubes, and to required colour, mounting at the required locations on the building. Channel letters sign are installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.1.2 MTR.HEIGHT Façade Channel Letter (RIIMS OPD BLOCK)WALL MOUNTING TYPE

13

-

-

... More
Providing and fixing at location a signs M.S internal hollow tube structure using Cosign Make- Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) International standards, with Lifetime warranty under normal working conditions. Sign is including all extruded aluminium profiles including i) 4 base profiles mill finished glossy appearance or texture, base profile with slots to accomodate 50x 50 mm , 100x50 mm or 150x 50 mm,(to create max depth of 200 mm from either of the combination aftet mounting base & cover profiles, M.S structure & 'V' notch groove to guide self tapering screws,directly to be screwed with ,Internal M.S structure with help of stainless steel high tensile strength zinc coated self tapering CSK screws (length as per requirement) ii) 4 cover profiles of eliiptical shape premium anodised with intel- locating faciltiy with base profile for posiotioning. to be screwed with base profile (screws not visible from outside) after cover profile is mounted to base iii) Top & bottom ACP egde profile premium grade anodised to cover edges of ACP free mounting without drilling or screwing. iv) ACP connect profile with minimum display free mounting without lockuing & drilling. etc ,Ultra violet print on ACP or ACRYLIC sheet can be done. Also, arrangement is done to (ACP or Acrylic 3 mm thick can be Inserted in Cosign totem profile slots). Top hat asper profile shape (aluminium 2-3 mm thick) is used to cover top part, 2mm thick opaque white acrylic(or clear)can be pasted on text panels as numbers with help of 3M make adhesive.also LED (Back lite) modules or edge lite modules. CosignTotem profiles screwed fixed with internal M.S structure are installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.ENTRY EXIT TOTEM SIZE-2500x900x300 GROUND Mounting Type.

8

-

-

... More
KITCHEN EQUIPMENTS

-

-

-

... More
SITC of MILK BOILER Cap. 75Ltrs

2

-

-

... More
S.S. Sheet insulated body with triple jacket. The water jacket will be fitted with 2 Kw heating element. Milk Outlet, water level indicator & draw off valve at the bottom & water tank. Phillips element, Elcon thermostat, GVC rotary switch, LED indicator for Power, 4mm thickness 3 core wire Rajdoot/Plaza make.

-

-

-

... More
MICROWAVE OVEN

2

-

-

... More
Cap.20-30Ltrs.

-

-

-

... More
IFB-MAKE

-

-

-

... More
PICK UP COUNTER WITH OVERSHELF

4

-

-

... More
Size 1800X600X850+300

-

-

-

... More
Top 3 sides, under & over shelf of s.s.sheet, on m.s.angle & s.s.tubular legs frame work. The counter will have 3 sides fully covered, operator side open. With one under shelf. One over shelf 300mm wide running along the full length of counter u type heating element of 1 Kw is placed under the one head shelf to keep the dishes warm provided with toggle switch also connected with 4 mm 3 core wire.

-

-

-

... More
WORK TABLE FOR SUPPORT OF TWO BURNER RANGE

2

-

-

... More
Size 1350X600X850mm

-

-

-

... More
Top & undershelf of s.s.sheet on m.s.angle frame work & s.s.tubular legs, with adjustable feet. Top to have sound deadning material lining as required.

-

-

-

... More
TWO BURNER COOKING RANGE

2

-

-

... More
App. Size 1200X600X850mm

-

-

-

... More
Frame work of m.s.angle duly painted, mounted on s.steel tubular legs with adjustable feet. Top & sidfes & under shelf of s.s.sheet. The range will be complete with 2nos. Hy-pressure gas burner with indivizual control valves. Cast iron pan support.

-

-

-

... More
EXHAUST HOOD {Without Ducting, Fixing & Extraction Fan} FOR TWO BURNER RANGE

2

-

-

... More
Size 1950x750x600mm

-

-

-

... More
Made of s.steel sheet, 20G thick duly welded & pop rivetted as required. The hood will be complete with s.s.sheet removable type baffle filters. Complete with greese collection channel & greese collection cup/s.

-

-

-

... More
JUICER (table top model)

2

-

-

... More
Cast Aluminium/CI body, duly polished / painted, with worm & perforated insert. Top feeding tray. Worm easily cleanable fitted with 1/2HP elect. motor.

-

-

-

... More
CONVEYOR TOASTER

2

-

-

... More
App. Cap. 100-125 Toasts/hr.

-

-

-

... More
S.S.Sheet body, having s.s.sheet conveyor belt. App 225mm wide. The unit will have heating elements on top & lower portion of conveyor belt with variable heat & speed control switch. (MADE IN ITALY)

-

-

-

... More
WORK TABLE WITH SINK FOR JUICER STATION

2

-

-

... More
Size 1800x750x150

-

-

-

... More
Top & Sink bowl of s.s.sheet, on s.s.anlge & s.s.tubular frame work with cross bracing at lower portion. Sink bowl will be integrally welded with top & grinded smooth. Sink bowl size 450x45-x250mm

-

-

-

... More
FOUR DOOR REFRIGERATOR

2

-

-

... More
App. Size 1200x675x2000mm

-

-

-

... More
Double walled, insulted 'PUF' body made of 0.8mm thick s.s.sheet. Inside chamber to have 4nos. S.s.wire shalves on adjustable channel. The unit will have 4 doors with magnetic rubber gascuts & locking provision. The condensing unit, consisting of 'Kirlos'

-

-

-

... More
WORK TABLE

2

-

-

... More
Size 1500x600x850mm

-

-

-

... More
Top & undershelf of s.s.sheet on m.s.anlge frame work & s.s.tubular legs, with adjustable feet. Top to have sound deadning material lining as required.

-

-

-

... More
EXHAUST HOOD (Without Ducting,Fixing & Extraction fan)

2

-

-

... More
Size 1950x750x600mm

-

-

-

... More
Made of s.steel sheet, 20G thick duly welded & pop rivetted as required. The hood will be complete with s.s.sheet removable type baffle filters. Complete with greese collection channel & greese collection cup/s.

-

-

-

... More
WORK TABLE

2

-

-

... More
Size 1650x675x850mm

-

-

-

... More
Top & undershelf of s.s.sheet on m.s.anlge frame work & s.s.tubular legs, with adjustable feet. Top to have sound deadning material lining as required.

-

-

-

... More
EXHAUST HOOD (Without Ducting, Fixing & Extraction fan) for low height burner

6

-

-

... More
Size 1650x750x600mm

-

-

-

... More
Made of s.steel sheet, 20G thick duly welded & pop rivetted as required. The hood will be complete with s.s.sheet removable type baffle filters. Complete with greese collection channel & greese collection cup/s.

-

-

-

... More
LOW HT, TABLE for supporting low height burner

6

-

-

... More
Size 750x750x600mm

-

-

-

... More
Specification same as that of work table but the table will be without undershelf & will have cross bracing support at lower portion

-

-

-

... More
LOW HT. BURNER

6

-

-

... More
Size 750x750x600mm

-

-

-

... More
Specification same as that of cooking range but the unit will be without undershelf, but will only have cross bracing support at lower portion

-

-

-

... More
EXHAUST HOOD (Without Ducting, Fixing & Extraction fan) for 03 burner cooking range

4

-

-

... More
Size 1650x750x600mm

-

-

-

... More
Made of s.steel sheet, 20G thickly duly welded & pop rivetted as required. The hood will be complete with s.s.sheet removable type baffle filters. Complete with greese collection channel & greese collection cup/s.

-

-

-

... More
THREE BURNER COOKING RANGE

4

-

-

... More
O/S 1800x600x850

-

-

-

... More
Structure made of m.s. angle of size 38x38x5mm, duly rust proof painted. Top of 165wg thick s.s.sheet. All four side covered up to height of app, 10' by 205wg stainless steel sheet. Bottom stainless steel stripes sheets complete with gas burners valves.

-

-

-

... More
WORK TABLE for support of 03 burner cooking range

2

-

-

... More
Size 1500x600x850mm

-

-

-

... More
Top & undershelf of s.s.sheet on m.s.angle frame work & s.s.tubular legs, with adjustable feet. Top to have sound deadning material lining as required

-

-

-

... More
EXHAUST HOOD (Without Ducting, Fixing & Extraction fan) for bulk cooker/boiler & fryer

4

-

-

... More
Size 1950x750x600mm

-

-

-

... More
Made of s.steel sheet, 20G thick duly welded & pop rivetted as required. The hood will be complete with s.s.sheet removable type baffle filters. Complete with greese collection channel & greese collection cup/s.

-

-

-

... More
BULK COOKER/BOILER TILTING TYPE

2

-

-

... More
Cap.160 Ltrs.

-

-

-

... More
Specification same as Sno. 13 but the frying pan will be of rectangular shaped with 12"depth & a pouring lip & the unit will be fitted with v type high pressure gas burner with the control valve & pilot lamp.

-

-

-

... More
BULK FRYER TILTING TYPE

2

-

-

... More
Cap.100Ltrs.

-

-

-

... More
Triple jacketed body of stainless steel sheet, Inner most jacketed of 16g thick with 12g thick dish ended bottom, second wall for air gap of 18g stainless steel sheet & outer insulation jacket also of 18g stainless steel sheet. The unit will have counter.

-

-

-

... More
WET GRINDER

2

-

-

... More
Cap. 15Ltrs.(1.0HP)

-

-

-

... More
Stainless steel sheet constd. Body with s.s.sheet constd. Revolving drum, cromium plated pillar support on m.s.angle frame work fitted with electric motor gear box & grinding stones & coconut scraper.

-

-

-

... More
DOUGH KNEADING MACHINE

2

-

-

... More
(CROMPTON MOTOR 2.0HP)

-

-

-

... More
App. Cap of Bowl 25 Ltrs.

-

-

-

... More
S.S.Mixing bowl, with s.s.rod/strip mixing arm, mounted on steel tubular & sheet frame work duly painted. Complete with 1.0HP Elect. Motor with the control switch.

-

-

-

... More
POTATO PEELER

2

-

-

... More
Cap.10kg/chrgs (CROMPTON MOTOR 1.0HP)

-

-

-

... More
16 gauge Stainless steel sheet peeling drum, lined inside with Abrasive material, stainless steel/cast iron rotating peeling disc. Top of the drum will have a potato inlet door, waste inlet provision peeled potato discharge door & waste water Outlet pipe.

-

-

-

... More
PULVeRISER (Std.)

2

-

-

... More
(CROMPTON MOTOR 1.0 HP)

-

-

-

... More
Stainless steel sheet body, 20g thick, the unit will have A top feeding tray & a housing of stainless steel casting with grinding plates & 3 type of meshes for variable type of grinding requirements. The unit will bw fitted with 1.0hp single phase electric.

-

-

-

... More
WORK TABLE SUPPORT OF PULVERISOR

2

-

-

... More
Size 1500x600x850mm

-

-

-

... More
Top & undershelf of s.s.sheet on m.s.angle frame work & s.s.tubular legs, with adjustable feet. Top to have sound deadning material lining as required.

-

-

-

... More
WORK TABLE WITH SINK FOR VEGETABLE WASHING

2

-

-

... More
Size 1950x600x850+150

-

-

-

... More
Top & Sink bowl of s.s.angle & s.s.tubular frame work with cross bracing at lower portion. Sink bowl will bw integrally welded with top & grinded smooth. Sink bowl size 450x450x250mm

-

-

-

... More
CHOPPING BOARD FOR MANUAL VEGETABLE CUTTING

2

-

-

... More
Size 1200x600x850mm

-

-

-

... More
Frame work made of s.s.angle top will have P.P./Nylon Board for chopping 700x700x100mm chopping board

-

-

-

... More
VEGETABLE CUTTING MACHINE

2

-

-

... More
Aluminium casted body with 1/2 hp electric motor safety switch & double feed pusher for round flat & vertical shaped food items etc., the unit will bw Table top model with easy to clean provision. Provided with 4 no cutting discs for slicing grating Dicing.

-

-

-

... More
CHAPPATI COLLECTION TABLE

2

-

-

... More
Size 1500x600x800

-

-

-

... More
Top Tray of 16G s.s.sheet, tray will have App.100mm ht. collor all around mounted on s.s.tubular legs with adjustable feet & one s.s.sheet undershelf.

-

-

-

... More
CHAPPATI ROLLING TABLE

2

-

-

... More
Size 2100x750x850mm

-

-

-

... More
Top & undershelf of s.s.sheet on m.s.angle frame work & s.s.tubular legs, with adjustable feet. Top to have sound deadning material lining as required. THREE SIDE CROSS BRACUNG MADE OF S.S. PIPE 1"DIA FOR UNDERNEATH STORAGE.

-

-

-

... More
CHAPPATI PLATE CUM PUFFER

2

-

-

... More
Size 1800x750x850mm

-

-

-

... More
Frame work of m.s.angle, mounted on s.s.tubular legs frame work. All sides pannels & undershelf of s.s.sheet, top plate 10 mm thick mild steel with cast iron puffing grills for puffing of chappaties. Complete with 'V' shape LPG burners with individual cont

-

-

-

... More
EXHAUST HOOD (Without Ducting, Fixing & Extraction fan) for chapatti plate

2

-

-

... More
Size 1950x750x600mm

-

-

-

... More
Made of s.steel sheet, 20G thick duly welded & pop rivetted as required. The hood will be complete with s.s.sheet removable type baffle filters. Complete with greese collection channel & greese collection cup/s.

-

-

-

... More
FOOD TROLLEY WITH 4 ROUND PANS, 1 RICE TRAY & STORAGE BENEATH

8

-

-

... More
O/S 1350x750x900mm

-

-

-

... More
S.S. Sheet insulated body, Frame work of m.s.angle of size 38x38x5mm mounted on 4 castors (2 with brakes) of size 150mm top to have cutout for 4nos. Round pans for Dal, Subzi, etc., with 1 rice tray & storage below. Three side covered with s.s.sheet with s.

-

-

-

... More
TRAY CARRIER TROLLEY

4

-

-

... More
Size 1200x600x1200mm

-

-

-

... More
S.S. bottom base shelf mounted at 150mm with all four sides turned down 50mm in 12mm and secured to welded s.s.angle frame work & PROVIDED WITH THREE NOS. OF DETACHABLE TRAYS CUM SHELFS UNIT WILL BE MOUNTED ON 4" PILLAR TYPE CASTORS WHEELS (2 NOS. WITH BRAKE & 2 NOS. WITHOUT BRAKE)

-

-

-

... More
TRAY SET UP COUNTER WITH BAIN MARIE & DOUBLE OVERSHELVES

4

-

-

... More
Size 1800x600x850+375+225

-

-

-

... More
Top of 16G s.s.sheet, Bain Marie water tank of 18G s.s.sheet, fitted with 3.0kw heating element with automatic temperature controller. Water outlet provision with drain valve, 3 sides covered with 20G s.s.sheet, Top to accommodate s.s.sheet Food Pans with GN pan 1x2x4" depth with lid 5 sets

-

-

-

... More
STORAGE CABINET

2

-

-

... More
Size 1200x600x850mm

-

-

-

... More
Top of 165wg S.S.Sheet on one over shelf, three sides of 20SWG s.s.sheet. Dish storage cabinet with 2 shelves and sliding door will be provided on service side.

-

-

-

... More
STORAGE RACK

10

-

-

... More
Size 900x450x1800

-

-

-

... More
Vertical of 32 mm dia stainless steel pipe with adjustable feet 4 no of 18 S.S.Sheet at equaly distance.

-

-

-

... More
INGREDIENT BINS

8

-

-

... More
Size 600x600x600mm

-

-

-

... More
DUNNAGE RACK

4

-

-

... More
Size 1200x600x500mm

-

-

-

... More
Made of s.s.square pipes of size 32x32mm, with support of 25mm square s.s.pipe

-

-

-

... More
POT RACK-3 TIER

10

-

-

... More
Size 1200x600x1500mm

-

-

-

... More
Verticals of 32mmx32mm square s.s.pipe, 3 shelves welded with vertical frame of 19mm dia s.s.pipe shelves with equal space between two tubes mounted on adjustable feet.

-

-

-

... More
SOILED DISH LANDING TABLE WITH GARBAGE CHUTE

2

-

-

... More
Size 2100x600x850mm

-

-

-

... More
Top of 16G s.s.sheet with 'Sunkun' top. A garbage chute provided on top with a space below to keep dust bin (Not part of equipment). The top will be mounted on m.s.angle, rust proof painted & s.s.vertical tubular legs with cross bracing support on 3 sides.

-

-

-

... More
THREE SINK UNIT

2

-

-

... More
Size 1800x600x850+150mm

-

-

-

... More
Top & 3 sink bowls of 16G s.s.sheet. Duly welded, grinded & polished smooth mounted on m.s.angle & s.s.tubular frame work with 150mm back splash. Each Sink Bowl Size 500x500x300mm (without sanitory fitness)

-

-

-

... More
CLEAN DISH TABLE

2

-

-

... More
Size 2100x600x850mm

-

-

-

... More
Specification same as that of work table but with 2 undershelves

-

-

-

... More
CLEAN DISH RACK

8

-

-

... More
Size 900x450x1800mm

-

-

-

... More
Vertical of 32 mm dia stainless steel pipe with adjustable feet 5 no vertical at equal distance 1st shelf fixed at 150mm from floor level.

-

-

-

... More
L.P.G GAS PIPE LINE (150 RUNNING FEET APPROX)

2

-

-

... More
ACTUAL MESUREMENT WILL BE ACCORDING TO As per site conditions

-

-

-

... More
CENTRIFUGAL EXHAUST BLOWER

2

-

-

... More
20000CFM

-

-

-

... More
S.S.GRATING for kitchen drainage trough

70

-

-

... More
(APPROX 25 RUNNING FEET)

-

-

-

... More
ACTUAL MEASUREMENT WILL BE ACCORDING TO As per site conditions

-

-

-

... More
EXHAUST HOOD DUCTING (APPROX 1200 SQUARE FEET)

-

-

-

... More
ACTUAL MEASUREMENT WILL BE ACCORDING TO As per site conditions.

2

-

-

... More
LAUNDRY

-

-

-

... More
Industrial Drying Tumbler.

-

-

-

... More
Front Loading Open Pocket, Reversible, Steam Heated 60 KG Capacity, Automatic Cool Down Feature.60 kg Capacity, Steam Heated.

1

-

-

... More
Flat Bed Press.

-

-

-

... More
Pneumatic, Automatic, Steam heated. Automatic digital timed. Powerful moisture suction blower. Pneumatic raising & lowering of spring suspended & Teflon lined Head. Adjustable ironing pressure. Head Size : 1500 x 750

1

-

-

... More
Flat Work Drying Ironer.

1

-

-

... More
1 Roll. Heated Chest Type, Front Feed, Rear Return,Steam Heated,

-

-

-

... More
Washroom Trolley.

1

-

-

... More
S.S. 100 kg capacity , Overall Size : 1250 x 675 x 780 ht.

-

-

-

... More
Dry Linen Trolley.

2

-

-

... More
S.S. 50 kg capacity , Overall Size : 1100 x 600 x 1500 ht.

-

-

-

... More
Shelf Trolley.

1

-

-

... More
S.S. 100 kg capacity Overall Size : 1200 x 600 x 1700 ht.

-

-

-

... More
Mobile Table.

1

-

-

... More
S.S. Top Size : 1150 x 750

-

-

-

... More
Laundry Scrub Station with 2 Sinks.

1

-

-

... More
All S.S. Size: 1600 x 550 x 900 height.

-

-

-

... More
Vacuum Finishing Table.

1

-

-

... More
Table Size : 1200 x 750, Electric Steam Iron, Teflon shoe, aluminium armoured & Spring loaded Condensate separator.

-

-

-

... More
Industrial Washer Extractor.

1

-

-

... More
30 kg Capacity High Spin, Suspended.Computer Controlled, steam heated.

-

-

-

... More
Industrial Washer Extractor.

2

-

-

... More
60 kg Capacity High Spin, Suspended. Computer Controlled, steam heated.

-

-

-

... More
Mobile Table.

2

-

-

... More
S.S.Top Size : 2350 x 750

-

-

-

... More
Air Compressor, 3 HP Double Stage, 160 ltrs Tank

1

-

-

... More
Steam Boiler, 200 kg Capacity with Water Softener

1

-

-

... More
CSSD EQUIPMENT

-

-

-

... More
SITC washing bench with double sink complete etc as required and as per technical specification attached. and as per technical specification attached.

1

-

-

... More
SITC Ultrasonic bench type - Semi automatic (28 lItres) complete etc as required and as per technical specification attached.

1

-

-

... More
SITC Trolley for material transport with 2 shelfs complete etc as required and as per technical specification attached.

2

-

-

... More
SITC Working table complete etc as required and as per technical specification attached.

2

-

-

... More
SITC Pass box for material complete etc as required and as per technical specification attached.

1

-

-

... More
SITC Washer Disinfector pass through double door 250 - 300 ltrs with 10 DIN Stainless Steel trays 480x254x50h mm + External Trolley (2.Nos) complete etc as required and as per technical specification attached.

1

-

-

... More
SITC Air/Water gun with set of nozzles & accessories complete etc as required and as per technical specification attached.

1

-

-

... More
SITC Manual Trolley Washing Gun complete etc as required and as per technical specification attached.

1

-

-

... More
Clean Area (zone 2)

-

-

-

... More
SITC Control & Packing table complete etc as required and as per technical specification attached.

1

-

-

... More
SITC Trolley for material transport with 3 shelfs complete etc as required and as per technical specification attached.

1

-

-

... More
SITC SS Wire storage self unit ,single complete etc as required and as per technical specification attached.

1

-

-

... More
SITC Working table complete etc as required and as per technical specification attached.

1

-

-

... More
SITC Roll holder with cutting knife complete etc as required and as per technical specification attached.

1

-

-

... More
SITC Heat Sealing machine complete etc as required and as per technical specification attached.

1

-

-

... More
SITC Stool for operators complete etc as required and as per technical specification attached.

4

-

-

... More
SITC Trolley for basket transport complete etc as required and as per technical specification attached.

1

-

-

... More
SITC Paper holding trolley (4 rods ) complete etc as required and as per technical specification attached.

1

-

-

... More
SITC Linen Inspection table complete etc as required and as per technical specification attached.

1

-

-

... More
SITC Documentation Labeller complete etc as required and as per technical specification attached.

2

-

-

... More
SITC Autoclave steam with pass through double door (500 - 600 litrs 8 stu) with Internal Trolley & SS baskets with External Trolley (4.Nos) complete etc as required and as per technical specification attached.

2

-

-

... More
Sterilizer should be suitable for sterilization of medical devices like flexible endoscopes, rigid endoscopes- both single channel and also dual channel and non-lumen, metal, non-metal heat & moisture sensitive instruments, like deify paddles etc. Should provide simple and fast sterilization of medical devices at low temperature using Hydrogen Peroxide sterilization gas/plasma technology without any need to have additional Dryer. Sterilizer must be having US-FDA/European conformity. Usable Rectangular chamber having volume of minimum130 ltrs effective usable volume. Should have removable shelf for keeping big load with double microprocessor controlled vertical sliding door. Should have screen size of 5.5" min or more colour TFT/LCD, touch screen. Should have integrated thermal printer, with 32 characters support. Sterilization temperature should not be more than 50 deg C ± 5 deg C. Should be of aluminum chamber and door. Should have three selectable pre-programmed sterilization cycles for different types/ quantity of lumen and non-lumen loads with max. Sterilization time not more than 55 min. ± 5 min.

1

-

-

... More
SITC Trolley for material transport with 2 shelfs complete etc as required and as per technical specification attached.

1

-

-

... More
SITC Linen Storage Trolley complete etc as required and as per technical specification attached.

1

-

-

... More
SITC SS contol Closed Trolley complete etc as required and as per technical specification attached.

2

-

-

... More
SITC SS Wire storage self unit, single complete etc as required and as per technical specification attached.

3

-

-

... More
SITC SS Free standing Basket racks complete etc as required and as per technical specification attached.

1

-

-

... More
MINOR MODULAR OPERATION THEATRE

-

-

-

... More
Antibacterial / Antifungal Paint

-

-

-

... More
Supply & laying of water based aseptic & self sterilizing wall coating with Anti fungal & Anti Bacterial Paint and other related painting components (viz: Primer, Putti etc.) of approved make and shadesso as to present a joint less finish etc. as per tech. specs. attached.

85

-

-

... More
Conductive Seamless Flooring with Coving on all Corners

-

-

-

... More
Supplying and laying of 2mm thick washable anti static seamless flooring with perfectly curved flash coving, resistant to mechanical stresses & dynamic loads & having ESD / EMI (conductive) protection characteristics. (Approx.), Coved Corners of approved make & shade. The joints of PVC tiles should be welded by special PVC thermal welding units using PVC welding bars colours. It should be scratch proof. The PVC flooring should be inert to body fluids, chemicals and disinfectants and should not be affected by temperature variation in the OT. The floor should efficiently discharge electric charges up to 2 kV. The conductive copper grid laid underneath the PVC sheet should be supported by liquid epoxy compounds allowed to set as a uniform and level surface & as per technical specs attached.

27

-

-

... More
Hermetically Sealed Manual Sliding Door System

-

-

-

... More
Fabrication, Supply, installation, testing & commissioning of sliding type Hermetically Sealed OT door having high density particle board cores, high pressure laminate face on both sides, viewing window 300 x 300mm. Size: 1500 x 2100 mm (W x H).

-

-

-

... More
Door (1500 mm x 2100 mm)

1

-

-

... More
Peripheral Lights (Dimmable)

-

-

-

... More
Supply, installation, testing & commissioning of Recess Mounted IP54 LED clean room protocol, non–hygroscopic peripheral lights having CRCA housing lumen pack of 5600Lm with system wattage of 60 watt. The fitting should be Bottom opening type with high reflected clear acrylic glass with dimmer control from the Surgeon Control Panel. Specially designed for Clean Room Applications, such as Modular OT & as per tech. specs attached.

6

-

-

... More
Anaesthesia Pendant

-

-

-

... More
Providing & fixing of single arm (900mm) anaesthesia pendant with load carrying capacity of 80Kg and rotational values of 330-340 degree with adjustable stopper. The pendent should be designed with service head to host, base, gas module, electric modular and shelves upto 8 gas outlets & 10 Electrical switches. Racks & Shelves should be provided to mount the equipments like monitor etc. The surgeon pendent should have two arms as per technical specs attached.

1

-

-

... More
MGPS Piping Work with in the theatre

1

-

-

... More
Scrub Sink (One Bay)

-

-

-

... More
SITC OF 1‐ Bay Scrub Sink, with Infrared Photo sensor, Digital Timer with user defined Time interval 1 & 3 minutes,1 no. mixture valve and 1 nos. solenoid valves along with Manual Option Foot Operated mechanism/ Foot switch. Anti‐splash metal body construction made of Stainless Steel Grade 304 polished finished. The Scrub Sink is provided with front access panel for ease of maintenance and repairs. 1 – Position size 800 mm long

1

-

-

... More
Strorage Unit

-

-

-

... More
Supply & instalaltion of Storage Unit size 1666 x 865 x350mm having two shelves, made 1.5 mm thick EGP with 120 microns. With Antifungal and Antibacterial surface coating. Having 5 mm thick acrylic sheet & mounted flush with the theater wall.

1

-

-

... More
ART WORK

-

-

-

... More
Metal Sculpture permanent in nature. Concept Creation Creating design and creation of Art work concept on given subject. With initial visit to site, preparation of various designs with different material, providing the samples, layout for approval, improvisation in short listed creative’s and making of final layout for final production by enlargement of drawing as per ratio of actual size, to prepare detailed working shop drawings (full scale) based on the Concept drawings / Views / site conditions, display of actual size dummy /mock up

-

-

-

... More
Fabricated in sun board with digital print for client approval Artwork Execution Execution of approved design in SS 316 grade steel /SS 304 grade SS (1.5 mm-2 mm thick) /STONE/ALLUMINUM /MIXED MEDIA METAL pu colored (IF REQUIRED)antique as per approved finish (mrf/akzo nobel) and protected against discoloration by sealing it with top coat of Mrf/Akzo nobel clear Pu. Proper support system will be given as per approved shop drawing, to withstand high wind pressure. The sculpture will be free from any Undulation /Dent unless it is part of the design. The cost is inclusive of transport/packing and installation of the same at site. Fastener/screws hilti or equivalent company. The rate shall be inclusive of all material, labor, machinery, tools, tackles, and scaffolding etc for all heights, all levels. LX BXH =CU.MTR

10

-

-

... More
Hand painting directly on wall Concept Creation Creating design and creation of Art work concept on given subject. With initial visit to site, preparation of various designs with different material, providing the samples, layout for approval, improvisation in short listed creative’s and making of final layout for final production by enlargement of drawing as per ratio of actual size, to prepare detailed working shop drawings (full scale) based on the Concept drawings / Views / site conditions, display of actual size dummy /mock up Fabricated in sun board with digital print for client approval. ARWORK EXECUTION Towards the cost doing hand painting using artist quality colors by qualified artists and protected by pu coating (mrf/akzonobel) all under the watchful eyes of expert artist

120

-

-

... More
FIBERGLASS SCULPTURE .Concept Creation

-

-

-

... More
Creating design and creation of Art work concept on given subject. With initial visit to site, preparation of various designs with different material, providing the samples, layout for approval, improvisation in short listed creative’s and making of final layout for final production by enlargement of drawing as per ratio of actual size, to prepare detailed working shop drawings (full scale) based on the Concept drawings / Views / site conditions ,Display of actual size dummy /mock up Fabricated in sun board with digital print for client approval Artwork Execution Scope of work includes clay modeling/dye /fiberglass casting and protective pu coating and installation at site .

6

-

-

... More
FIBERGLASS mural Concept Creation Creating design and creation of Art work concept on given subject. With initial visit to site, preparation of various designs with different material, providing the samples, layout for approval, improvisation in short listed creative’s and making of final layout for final production by enlargement of drawing as per ratio of actual size, to prepare detailed working shop drawings (full scale) based on the Concept drawings / Views / site conditions ,Display of actual size dummy /mock up Fabricated in sun board with digital print for client approval Artwork execution Towards the cost of making fiberglass mural including clay modeling/dye fiber glass casting, hand painting and protective pu coating(akzo nobel/sirca) all under the watchful eyes of expert artist

6

-

-

... More
Mixed media mural Wood/metal/fiberglass/terracotta /tiles or anything other medium artist find suitable as long as it is permanent in nature. Concept Creation Creating design and creation of Art work concept on given subject. With initial visit to site, preparation of various designs with different material, providing the samples, layout for

-

-

-

... More
approval, improvisation in short listed creative’s and making of final layout for final production by enlargement of drawing as per ratio of actual size, to prepare detailed working shop drawings (full scale) based on the Concept drawings / Views / site conditions ,Display of actual size dummy /mock up Fabricated in sun board with digital print for client approval. Artwork execution Towards the cost of making 3D relief mural in approved medium(Wood/metal/fiberglass/terracotta /tiles or anything other medium artist find suitable as long as it is permanent in nature.) and protective pu coating(akzo nobel/sirca) all under the watchful eyes of expert artist.

32

-

-

... More
Canvas paintings (oil /acrylic medium) Concept Creation Creating design and creation of Art work concept on given subject. With initial visit to site, preparation of various designs with different material, providing the samples, layout for approval, improvisation in short listed creative’s and making of final layout for final production by enlargement of drawing as per ratio of actual size, to prepare detailed working shop drawings (full scale) based on the Concept drawings / Views / site conditions, display of actual size dummy /mock up Fabricated in sun board with digital print for client approval ART WORK EXECUTION Towards the cost of doing canvas PAINTING by qualified artist including frame and installation at site

40

-

-

... More
CURTAIN & IV HANGER SYSTEM

-

-

-

... More
Providing and installation of Cubical tracks system made of Powder coated Aluminium alloy, mounted on the ceiling using Suspension hangers and bushes, powder coated wall bracket and Track Joiners wherever required. This system shall be complete with stain free polyster fabric, Water repellent Curtains having 18" Net on top. The curtain shall be approx 7X4 feet, with two curtains stiched together wherever required. Curtains shall also be provided with smooth movement, non sticking runners, with Stainless steel hooks, for easy movement. The system shall have curtain removal points and end cap complete as per technical specifications wherever is required.

15

-

-

... More
Providing and installation of I.V. Hanger with 5 hooks, made from mirror finish stainless steel, 304 grade with adjustable height, provided with 4/6 feet aluminium alloy track powder coated with endcap of tracks, 1 pc of trolley for smooth IV Hanger movement on track, 2 pcs of suspension hanger powder coated, top & bottom bush, powder coated, for easy fitting and better aesthetics complete as per technical specifications is required.

15

-

-

... More
Cost of Drilind 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressureand equipmentsas well as fule, lubricantsand cost of transportation of rig machine annd other vehical up to Site.

-

-

-

... More
(a) From 0.00 M to 50.00 M below G.L.

100

-

-

... More
(b) From 51.0 M to125.00 M

150

-

-

... More
(c) From126.0 M to150.00 M

50

-

-

... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 200 mm nominal size dia

50

-

-

... More
Development of tube well in accordance with IS : 2800 (part I) andIS: 11189, to establish maximum rate of usable water yield withoutsand content (beyond permissible limit), with required capacity aircompressor, running the compressor for required time till well isfully developed, measuring yield of well by "V" notch method or anyother approved method, measuring static level & draw down etc. bystep draw down method, collecting water samples & getting testedin approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessoriesetc., all as per requirement and direction of Engineer-in-charge

4

-

-

... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200 mm dia

4

-

-

... More
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 200 mm clamp

4

-

-

... More
Supplying 100mm dis submersible pump sets confirming to 8034 and motor confirming to IS 9283 pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller. Motor suitable for working on 415 + 10, 3HP, 50 Hz, AC supply with cable guard, thurst carbon/fiber bearing to withstand entire hydraulic thurst, water proof winding shall be provided. The pump set shall be suitable for diret coupling Pump shall have suitable outlet as per manufacturers design. Anti thurst stream lined non return valve shall be provided with pump, 3 meter submersible copper conductor cable in single/double run shall be provided with each pump.Submersible pump set 100mm dia (with Polypropylene/Noryl Impeller) up to 20 stages 2 HP

2

-

-

... More
Supply fitting and fixing of standered make starter pannel Board with arrangement of all necsssury protection including all taxes , all complete job as per direction of E/I.

2

-

-

... More
Supplying fitting and fixing 3 crore 4 sqmm Flat copper submersible cable FINOLEX / HEVELS make including all taxes ,royalty etc all complete job as per direction of E/I.

260

-

-

... More
Supply fitting and fixing lowering 40 mm dia G.L. collumn pipe - do - do - all complete job as per direction of E/I.

230

-

-

... More
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

-

-

-

... More
Providing designation 75A work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.m. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials ranking out joints to 15mm depth, curing taxes and royalty all complete as per building specification and direction of E/I.

15.21

-

-

... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size)

0.84

-

-

... More
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete

4.25

-

-

... More
Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete. 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

1.87

-

-

... More
Providing 1.5mm cement punning including curing carriage of water with all leads and lifts as per building specification and direction of E/I.

10.91

-

-

... More
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. 14.14.2-150 mm dia

60

-

-

... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge 100 mm nominal size dia

30

-

-

... More
Supplying, filling, spreading & leveling stone boulders of size range5 cm to 20 cm, in recharge pit, in the required thickness, for allleads & lifts, all complete as per direction of Engineer-in-charge

3.34

-

-

... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to10 mm, in the recharge pit, over the existing layer of boulders, inrequired thickness, for all leads & lifts, all complete as per directionof Engineer-in-charge

3.34

-

-

... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mmto 2 mm in recharge pit, in required thickness over gravel layer, for all leads& lifts, all complete as per direction of Engineer -in-charge

3.34

-

-

... More
DT : Basic rates for 125/115mm dia drilled Tube-well for drilling in all kinds of soil and rock for installation of hand pump with DTH rig Machine all complete including supplying all materials, labours, tools, drilling, rigs, air compressor and equipments as well as fuel lubricant, for making 125/115 mm dia boring etc. and cost of transporting rig machine and other vehicle up to site of work as per specification and direction of E/I.. (Basic Rates) Drilling upto 30 mtr. Depth below G.L. in Rural Area

30

-

-

... More
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm. depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth lead upto 50 metres.

3500

-

-

... More
Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.)For Grading -II Material

-

-

-

... More
for grading- II Material

700

-

-

... More
Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.)

875

-

-

... More
Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor @0.20 kg/sqm on the prepared bituminous surface cleaned with mechanical broom. As per MOSRT&H specification 502 (5th revision ) & as per direction of E/I.

7000

-

-

... More
Bituminous Macadam (Providing and laying bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder, transporting to site, laid over a previously prepared surface with paver finisher to the required grade, level and aligment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction) with modified graded bitumen.

210

-

-

... More
Providing and applying primer coat with bitumen emulsion on prepared surface of granular base including clearing of the road surface and spraying primer @0.70 kg/sqm using mechanical means . As per MOSRT&H specification 502 (5th revision ) & as per direction of E/I.

3500

-

-

... More
Bituminous concrete Grading- II With VG-40 Bulk Bitumen -Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @5.4 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment , rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause no. 507 complete in all respects.

105

-

-

... More
Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 1.4.8 (1 Cement :4 coarse sand :8 graded stone agregate 40 mm nominal size)

290.34

-

-

... More
Providing Retro-reflective regulatory sign board of size 900 mm dia meter made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of M.S. angle 50x50x4 mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per direction of Engineer-in-charge.

4

-

-

... More
Providing and applying 2.5 mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.

3500

-

-

... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineerin- Charge.

-

-

-

... More
60mm thick Cement concrete paver block of M-35 grade with approved colour, design & pattern.

1451.68

-

-

... More
Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate and base course and filling with 150 mm thick jamuna sand, including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge.

1451.68

-

-

... More
Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing. 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

67.5

-

-

... More
Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

100

-

-

... More
Add GST 18 %

18

-

-

... More
Add Labour cess 1%

1

-

-



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements
Combined ShapeCreated with Sketch.Sign In
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.
TENDER BY COUNTRIES
View All
United States Tenders|
United Kingdom Tenders|
Spain Tenders|
France Tenders|
Qatar Tenders|
Australia Tenders|
Canada Tenders|
China Tenders|
Malaysia Tenders|
Maldives Tenders|
Singapore Tenders|
Bangladesh Tenders|
Ethiopia Tenders|
Bhutan Tenders|
Kuwait Tenders|
Oman Tenders|
Germany Tenders|
Egypt Tenders|
Ghana Tenders|
Saudi Arabia Tenders
TENDER BY AUTHORITIES
View All
Federal Road Agency Tenders|
Bangladesh Railway Tenders|
Area Metropolitana De Barcelona Tenders|
Jsc Russian Railways Tenders|
Kuwait Oil Company Tenders|
Civil Aviation Authority Tenders|
Food And Agriculture Org. Tenders|
Eskom Tenders|
Energy Regulation Commision Tenders|
Dept Of Defence Tenders
TENDER BY CATEGORIES
View All
Agriculture Or Forestry Works Tenders|
Automobiles And Auto Parts Tenders|
Civil And Construction Tenders|
Consultancy Services Tenders|
Education And Training Services Tenders|
Electrical And Electronics Tenders|
Finance And Insurance Sectors Tenders|
Food Products Tenders|
Furnitures And Fixtures Tenders|
Healthcare And Medicine Tenders
TENDER BY PROCUREMENT
Goods Tenders|
Works Tenders|
Services Tenders
OFG MANUFACTURING BUSINESSES PRIVATE LIMITED
  • Head Office
    6th Floor, Global Business Park, Tower A, Besides Guru Dronacharya Metro Station, Gurugram, Haryana - 122002, India
  • Sales Office
    B - 705 & 706, Sankalp Iconic Tower, Opp. Vikramnagar Colony, Iscon Cross Road, S. G. Highway, Ahmedabad - 380054, India
COMPANY
POLICIES
SUPPORT
MOBILE APPS
© Powered by OFG MANUFACTURING BUSINESSES PRIVATE LIMITED, All Rights Reserved