State Building Construction Corporation Limited Tender
Search from across the categories, cities, and authorities to find the latest Jharkhand tenders. Every Jharkhand tender is curated from credible sources of government websites (eProcurement Jharkhand portal) and newspapers, thus ensuring the credibility of the information presented to you. For more information on Jharkhand tender bidder registration, the login process and more read the FAQs section on this page.
State Building Construction Corporation Limited - JSBCC Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date2 May 2023
Closing Date29 May 2023
Tender AmountRefer Documents
Costs
EMD
₹ 8,40,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_JSBCC_70425_1Bid Award Id
ViewTender No
JSBCCL/07/2023-24Tender Authority
State Building Construction Corporation Limited ViewPurchaser Address
-Website
http://jharkhandtenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Earth work in filling in sub floor trenches and plinth in layers not exceeding 150mm thick, well watered, rammed, fully compacted and fine dressed with earth obtained after cutting within lead of 50m and lift of 1.5m all completed as per direction of the E/I (mode of measurement compacted volume).
1771.37
-
-
Providing coarse clean sand in filling in foundation trenches or plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts includng cost of all materials, Labour, rotalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume).
524.29
-
-
Providing designation 75 A brick work in C.M.(1 :6) in foundation & Plinth with approved quality of clean coarse sand of F.M. 2 to2.5 including providing 10 mm thick mortar joints cost of screening materials , scafolding , raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/l.
29.7
-
-
Providing designation 75B work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.m. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials ranking out joints to 15mm depth, curing taxes and royalty all complete as per building specification and direction of E/I.
228.32
-
-
Providing designation 100A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9" x 4.5" x 3") in C.M. (1:6) in superstructure with approved quality of clean sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.
899.87
-
-
Providing and laying in position cement concrete of specified grade
excluding the cost of centering and shuttering - All work up to plinth
level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone
aggregate 20 mm nominal size)
636.24
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 40 mm nominal size)
6.83
-
-
Providing and laying in position cement concrete of specified grade
excluding the cost of centering and shuttering - All work up to plinth
level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone
aggregate 20 mm nominal size)
71.74
-
-
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)
401.93
-
-
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)
142.27
-
-
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
468.2
-
-
Providing Toe steel reinforcement approved design and drawing including carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (Only Valid for SAIL & TATA STeel)
-
-
-
8 mm dia (20 %of total reinforcement)
28.32
-
-
10 mm dia (20 %of total reinforcement)
26.31
-
-
12, 16, 20, 25 & 32 mm dia (60 %of total reinforcement)
82.4
-
-
Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete
566.04
-
-
Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts
1648.22
-
-
Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers
1789
-
-
Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform
242.92
-
-
Centering and shuttering including strutting, propping etc. and removal of form for : Weather shade, Chajjas, corbels etc., including edges
86.77
-
-
S/F M.S. grill made of 20 x 6mm M.S. flat as per approved designious fillet welded and finished smooth, hoisting carriage of grill to worksite hoisting as per building specification and direction of E/i.
1985.4
-
-
Providing and fixing fan hook of 16mm dia M.S. bar 1 metre long bent to required size and shape, placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/l. (where material is not supplied by deptt.)
1
-
-
S/F local make collapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2mm at 100mm centers and braced with M.S. flat disgonal with top and bottom rails of T iron 40 x 40 x 6mm with 38mm dia steel pulleys complete with bolts nuts locking arrangements steppers handles including applying a priming coat of red lead paint carriage hoisting and taxes all complete as per building specification and direction of E/I.
71.74
-
-
S/F local make fully glazed steel door, windows or ventilation of standard rolled 'Z' and mullion steel section and size as per IS - 38 joints met welded with 100 x 16 x 3mm M.S. lug fixed in cement concrete (1:2:4) blocks, 15 x 10 x 10cm size including cost of oxidized iron fitting with hinges, handle per step catch springs, 3mm thick plain glass panes with aluminum beads and inner frame fixed with lugs with 20mm long 6.3mm GI. counter sunk machine screw and nuts and applying a coat red lead paint carriage to work site hoisting and plcing in all position in all storys and taxes all complete as per building specification and direction of E/I.
97.8
-
-
S/F 20mm dia M.S. bar I meter long holding down bolt with nuts and washers 100 x 100 x 6mm plate fitted and fixed with cement concrete (1:2:4) as per design all complete as per building specification and direction of E/I.
216
-
-
S/F 25mm thick solid core type non-decorative single leaf flush door and windows with black board core banded with high quality phenol formaldehydes synthetic resin both side commercial veneered of standard make with oxidized iron fittings such as hinges, sliding door bolts tower bolts, handles or rings hooks and eyes, cleats sand block as per schedule taxes and royalty all complete as per building and direction of E/I.(one side teak)
35.18
-
-
Providing brick flat soling
318.77
-
-
Providing designation 75B one brick flat soiling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.
3350.04
-
-
Providing 25mm thick first class patenet stone flooring (1:2:4) with stone chips in two layers bottom layer 19mm thick (1:2:4) with 12mm to 6mm sie graded stone chips and top layer 6mm thick (1:2) with 6mm down stone chips, in panels including cost of curing finishing the surface smooth by rubbing with carborandum stone taxes and royalty with all complete as per building specification and direction of E/I.
17.64
-
-
Providing 12mm cement plaster (1:3) with clean sand of F.M. 1.5 with flooring coat of neat cement in skirting including rounded of junction with floor, curing, taxes and royalty all complete as per building specification and direction of E/I.
83.02
-
-
Providing and laying 15mm to 23mm thick kotah stone tiles in risers of step, skirting and pillars of approved size texture and colour laid over 12mm thick cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing to granolilthic finish with approved quality of carborandom stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I.
26.7
-
-
Providing 12mm thick cement plaster (1:6) -with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty as per building direction of E/I.
5949.23
-
-
Providing 6 mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I.
206.38
-
-
Providing 19mm thick proof cement (1:3) with clean coarse sand of F.M. 1.5 including screening curing with all leads lifts of water scaffolding taxes and royalty all complete as per building specification and direction of E/I.
4499.71
-
-
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
10430
-
-
Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I.
5930.28
-
-
Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5with 5% cico or any other approved water proofing compoundincluding taxes and royalty all complete as per building specification and direction of E/l.
2016.85
-
-
Providing 25mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5with 5% cico or any other approved water proofing compoundincluding taxes and royalty all complete as per building specification and direction of E/l. (design plaster)
37.96
-
-
Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/l.
131.52
-
-
Providing two coat of snowcem shade and make over a coat of cement of primer on new surface including preparing the plastered surface smooth with sand paper, soaping, curing and taxes all complete as per building specification and direction of E/I.
2277.44
-
-
Providing two coats of synthetic enamel paint over a coat of primer of approved shade and make over new wooden surface after cleaning removing dirt scales smoke, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.
-
-
-
Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement Area shall be multiplied by the co-efficient as indicated in building specificatio).
235.87
-
-
Providing 2 coats of Synthetic Enamel Paint of approved shade and make over steel surface grills & railings including cleaning the surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I.
301.64
-
-
Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of E/W involved, with 75 mm cement concrete (1:4:8) over one brick designation 100A flat soiling in proper grade and slope at the b.
1836
-
-
Supplying and fixing C.I. cover without frame for manholes : 560 mm diameter C.I. cover (medium duty) the weight of
the cover to be not less than 58 kg
4
-
-
Making soak pit 2.5 m diameter 3.0 m deep with 45x45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
-
-
-
with common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
-
S/F local make rolling shutter of approved size and make up to 12 sqm. Area with push and pull operation propelry fabricated with 80 x 1.22mm. M.S. lathers of white sheet machine rolled and inter locked together through their length and joined together at ends by end locks mounted over 38mm dia light M.S. black pipe shaft with and brackets made to size from 3mm M.S. sheet guide channels made of 12 gauge sheet and 16162 size SKF, NBC or equivalent bearing, one piece lock plate wall special and 2 nos. 7 lever brass lock with in side and out side locking arrangement including out of coiled type springs stoppers priming coat greasing and taxes all complete as per building specification and direction for E/I. (Mode of measurement is as per size of opening)
-
-
-
80x1.25 mm M.S. laths with 1.25 mm thick top cover
70.56
-
-
Providing and fixing ball bearing for rolling shutters.
384
-
-
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineerin-charge:
-
-
-
Providing & fixing pressed steel door frames manufactured from commercial mild steel sheet of 1.25mm thickness including hinges ,jamb, lock jamb, bead and if requiredangle threshold of mild steel angle section 50 X 25mm, orangle threshold of mild steel angle section 50 X 25mm, orbase ties of 1.25mm pressed mild steel welded or rigidlyfixed together by mechanical means, adjustable lugs withsplit end tail to each jamb including steel butt hinges split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and 2.5mm thick with mortar guards, lock strike-plate andshock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by the Engineer Incharge - Profile - B - Fixing with adjustable lugs with split end tail to each jamb
4.57
-
-
Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately
5.25
-
-
Providing 50 mm thick cement concrete flooring (1:2:4) with 20 mm to 6mm size graded stone chips finished with floating coat of neat cement in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royalty with all complete as per building specification and direction of E/l
3812.53
-
-
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25mm thick
80.26
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to
IS: 15622 (thickness to be specified by the manufacturer), of approved
make, in all colours, shades except burgundy, bottle green, black of
any size as approved by Engineer-in-Charge, in skirting, risers of steps
and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3
coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,
including pointing in white cement mixed with pigment of matching shade
complete
15.49
-
-
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.
2.22
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming toIS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black ofany size as approved by Engineer-in-Charge, in skirting, risers of stepsand dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,including pointing in white cement mixed with pigment of matching shadecomplete.
-
-
-
Structural steel work riveted, bolted or welded in built up sections, trussesand framed work, including cutting, hoisting, fixing in position and applyinga priming coat of approved steel primer all complete
6804
-
-
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
1191.96
-
-
Providing and fixingprecoated galvanished steel roofing accessories 0.50 mm (+ 0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS : 277, in 240 mpa steel grade., 5-7 micorns epoxy primer on both side of the sheet and polyester top coat 15-18 micorns using self drilling/ self tapping screws complete :
-
-
-
Crimp Curve
126
-
-
Gutter
252
-
-
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
110mm dia
2452.8
-
-
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
Single pushfit coupler 100mm dia
336
-
-
Bend:- 110mm dia
336
-
-
Shoe:- 110mm dia
336
-
-
Providing & fixing unplastcised PVC pipe clips of approved design t unplasticised PVC rain water …..E/I
-
-
-
110mm dia
400
-
-
Providing & fixing to the intel mouth of rain water pipe cost iron greetings 15cm diameter & weighing 440grams.
160
-
-
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
4499.71
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :
-
-
-
Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.:
-
-
-
With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
316
-
-
Providing 50 mm thick damp proof course with cement concrete M-200 with nominal mix of (1:1.5:3) with approved quality of stone chips of 20 mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including, screening, shuttering and mixing cement concrete in mixer with 5% cico or any other approved water proofing compound and placing in position, striking, curing, taxes and royalty all complete as per building specification and direction of E/l.
5.45
-
-
Proviriing desIgnation '100 A brick work with fly ash lime brick (FLAG)
confirming to lS 12894-199C (9"x4.5'x3") in C M (1 :6)in super
structure with approved quality of clean coarse sand of F.M. 2 to 2.5
inciudinq providing 10 min thick mo(ar joints, cost of screening materials,
rakinq out loirrts to 15mm depth, curing, taxes and royalty allcomplet
190.88
-
-
Providing average 75mm. thick lime terracing (24 lime:36 surkhi : 100 brick khoa) well beaten and compacted including maintaining proper level and slope, making ghundi with finishing treatment, cost of carriage, curing, royalty and taxes all complete as per building specification and direction of E/l.
23.46
-
-
Providing 125mm thick reinforced designation 75A brickwork in C.M. (1:4) in Superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, cost of materials, racking out joints to 15mm depth, carriage, taxes and royalty (but excluding the cost of reinforcement) all complete as sper building specification and direction of E/I.
13.2
-
-
Providing 12mm thick cement plaster (1:3) with clean coarse sand of F.M. 1.5 and including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I
131.52
-
-
Providing and fixing concertina coil fencingwithpunchedtapeconcertina coil 600
mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tiedwith G.I. staples and G.I. clips to retain horizontal, includingnecessary bolts or G.I.
barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge,with reinforced barbed tape(R.B.T.) / Spring core (2.5mmthick) wire of high tensile
strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)
390
-
-
Angle size 50x50x6 in mm as per I.S. 226
1.84
-
-
Steel work welded in built up sections/framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required
-
-
-
In gratings, frames, guard bar, ladder, railings, brackets gates and similar works
1409.4
-
-
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the subgrade and disposal of surplus earth with lead upto 50 metres.
2700
-
-
Extra for compaction of earth work in embankment under optimum
moisture conditions to give at least 95% of the maximum dry density
(proctor density).
2700
-
-
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.
-
-
-
GRADE-III MATERIAL
405
-
-
Construction of dry lean cement concrete sub base over a prepared sub-grade with coarse and fine aggregate conforming to IS:383, the size of coarse aggregate not exceeding 25 mm, aggregate cementratio not to exceed 15:1, aggregate gradation after blending to be as per specifications, cement content not to be less than 150 Kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, for all leads & lifts, laid with a mechanical paver, compacting with 8-10 tonne vibratoryroller, finishing and curing etc. complete as per direction of Engineerin- charge
540
-
-
Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brushetc. complete as per specifications and directions of Engineer-incharge. (The panel shuttering work shall be paid for separately). (Note:- Cement content considered in this item is @ 330 kg/cum.Excess/less cement used as per design mix is payable/ recoverableseparately).
540
-
-
Carriage of materials by mechnical means including loading at source, unloading at works site and stacking properly, labour, P.O.L., etc. all complete as per direction of E/I.
-
-
-
Bricks (1K+7p)
452.73
-
-
Sand 8KM
3691.38
-
-
Local Sand 1 km
7.77
-
-
Chips 22 KM
4605.32
-
-
Flyash Bricks 15 KM
375.87
-
-
STONE 22 KM
445
-
-
Earth 1km
1744.86
-
-
ELECTRICAL
-
-
-
Point wiring in PVC conduit, with modular type switch.
Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq. mm FR PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch modular plate suitable G.I box etc. as required.
-
-
-
GROUP - C
335
-
-
Wiring for light/power plug with 2x4 sqmm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit along with 1 No. 4 sq mm FR PVC insulated copper conductor single core cable for loop earthing etc as required
230
-
-
supply a nd fixing following modular tyDO SW tCh / socket on the existing switch box / including connections etc as required
-
-
-
5/6 AMPS, One way switch
160
-
-
3 PIN 5/6 AMPS OUTLET
160
-
-
S/F light plug point with modular type accessories :-
Supplying and fixing suitable GI box with modular plac and cover in front on surface of in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch. corutection, painting
etc. as required (For light plugs to be used in non residential buildings)
94
-
-
S/F power plug point with modular type accessories :-
Supplying and fixing suitable GI box with modular plac and cover in front on surface of in recess, including providing and fxing 6 pin 15/16 amps modular socket outlet and l5/16 amps modular switch. connection, painting letc. as required (For light plugs to be used in non residential buildings)
17
-
-
supplying and fixing 2 pin 5 amp celling rose on existing junction box/wooden block inuding ccnnection etc as reauired
65
-
-
supply and fixing batten /angle holder including connections etc as required
220
-
-
installations testing and commi ssioning of ceiling fan including wiring the down rods of sta ndard length (Up to 30 cm) with 1 .5 sq mm F R PVC insulated copper conducter single core cable etc, as required
17
-
-
Installation of exhaust fan upto 450 mm in the existing opening, including making the hole to suit the size of the abeve fan, making good the damage, connection, testing, commissioning
etc. as required.
16
-
-
S/F rewire double pole / T p& n switch disconnector providing and fixing following Dp
-
-
-
63Amp douple pole
18
-
-
100 Amp TP& N
3
-
-
S/F bus bar chamber providing and fixing floowing capacity busbar chamber with 4 strips of length 300 mm made of copper suitable of following capacity complete with
-
-
-
100 Amps
11
-
-
Supplying and fixing following way, single ooze and neutral. sheet steel, MCB distribution board, 240 volts. on surface / recess, complete with tinned copper bus bar. neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as rea uired. (but with out MCB/RCCB/Isolator)
-
-
-
6 way double door
22
-
-
S/F OF 6 amps to 32 amps rating 240 volts, 10 KA, "B" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DP complete with connections, testing and commissioning etc, as required
-
-
-
6/32 amps, single pole, "b" series
240
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required
-
-
-
2X2.5 sq.mm+1 X sq.earth wire
1600
-
-
2X4 SQ.mm+1X4sq. Mm earth wire
450
-
-
2 X 6 sq. mm +1 x 6.0 sq. mm earth wire
230
-
-
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.
-
-
-
1 or 2 Module (78mm x 78mm x 45mm)
15
-
-
4/5 Module (78mm x 140mm x 50mm)
15
-
-
Supplying and fixing call bell/ buzzer suitable for D.C/A.C single phase,230 volts, complete as required.
15
-
-
Supplying and fixing of following double poIe,240 volts, isolates in existing MCB DB complete vith connections, testing and commissioning etc as required
-
-
-
40 Amp
24
-
-
63.Amp
11
-
-
S/F Modular type electronic fan regulator :-
Supplying and fixing stepped type electronic fan regulator on the existing
modular plate & switch box including connections but excluding modular
plate etc. as required.
12
-
-
Earthing with copper plate 600mmx 600m mx 3mm thick inc!uding acessories anc
providing m asonary enclosure with cover plate having locking arrangement and watering pine etc with charcoal or cock e nd salt complete etc. as reauired (with
charcoal or coke and salt)
6
-
-
Supplying and laying 6 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc. as required
7
-
-
Supplying and laying 25 mm x 5mm GI strip in 40 mm dia GI pipe from earth electrode including connection with GI nut blt spring washer excavation and re-filling etc. as required.
65
-
-
Laying of one number PVC Insulated and PVC sheathed / X L PE power cash of 1 1 KV g rade of size ex ceedino, 35 sq mm but not exceeding 95 sq mm. direct in ground including excav ation. sand cushionong, protective covering and re filing the trench etc as required
280
-
-
50 sq.mm 3.5 core
330
-
-
Supply installation, testing and commissioning of following size ceiling fan 3 blades confirming to IS 374 :2019 including wiring the down rods of standard length (upto 15 cm) with 1 .5 sqmm FR PVC insulated, copper wire suitable for 230 V 50 Hz, Single phase supply etc complete as required ( 1200MM) Ceiling Fan
14
-
-
100 W STREET LIGHT
22
-
-
Supplying and fixing 20 amps,415 volb,TPN industrial type, socket outlet
f with pole and earth, metal enclosed plug top alongwith 20 amps"C"
lc.rrue, TPN, MCB, in sheet steel enclosure, on surface or in recess, with
lchained metal cover for the socket out let and complete with connections,
Iesti"g and commissioning etc. as required
5
-
-
/F 20 amps SPN MCB industrial socket outlet :- Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps"C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testhg and commissioning etc. as required
5
-
-
Supplying installation testing and commissioning following ration surface mounted LED tube light fittings suitable for 230V 50Hz Single phase supply etc complete as
reauired 20/22 W LED Tube Light
110
-
-
Supply of Metal Exhaust Can 2"(300 mm) Supply of 12"(300mm), 230V AC metal e xhaust fan in the elisting opening including making g ood the damage, connection testing , commissioning etc as required ( Make Polar/Bajaj/ Havells/Crompton)
31
-
-
LED Bulk 9W/ 10 W Supplying and fixing of LED 9W /10W bulb and accessories as required (make Bajaj / Havells/ Philips)
161
-
-
Supplying and fixing of following ways single pole and neutral sheet steel, MCB distribution board 240 volts on surface / recess complete with tinned copper busbar neutral busbar earth bar din bar detachable gland plate interconnection phosphatized and powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator) 12 way single door
5
-
-
S.I.T.C of floowing rating LED Flood lighting luminarie with pressure die
cast housing and toughened glass cover (IP 66 protection) in existing
pole/pipe for supply voltage 1C[.Z70Y AC,50Hz. Luminarie shall be
confirm tolS:,1,0322part-5/section-5 and shall be complete with all
neccssary accessories as required
22
-
-
Supplying and fixing of following ways surface/recess mounting, vertical type ,415 volts, TPN MCB distribution board of sheet steel, dust protecte duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link earth bar, din bar for mounting MCB's (but without MCB's an incomer) as required ( note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.
-
-
-
8 ways (8+24), double door vertical type
10
-
-
40 amp SPN
40
-
-
6/32 amps SPN
80
-
-
2 7 Mtr. height Octagonal Hot - Dip galvanized pole( BOP - 7030) with top dia 70 mm, bottom dia L30 mm & made of 3 mm thick sheet, base plate dimensions200X 200X12mm ( Lx B xT) including suitable sizes of foundation bolt all complete as reqd. (Without Arm)
2
-
-
11 Mtr. height Octagonal Hot - Dip galvanized pole( BOP - 1133) with top dia 90 mm, bottom dia240 mm & made of 3 mm thick sheet, base plate dimensions 320 X 320X 16 mm ( L x B x T) including suitable sizes of foundation bolt all complete as reqd. (Without Arm)
2 m Double Arm suitbale for 90mm Top
4
-
-
6 lnstallation, Testing & Commissioning of the 9 Mtr. Octagonal PoIe & light fi6ng with the help of suitable toolGd phnts, and construction of shallow foundation with M25 grade concrete considering safe soil bearing capacity of 1.0T/mtrs sq. but excluding wire and MCB
2
-
-
PLUMBING
-
-
-
Supplying, fitting and fixing 40 mm high viterous white glazed earthen ware E.W.C. with "p" trap of Parry Hindustan or any other I.S.S. make including supplying & fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450 grms. , 15 mm P.V.C. alkathene pipe 45 cm long with brass coupling at both ends and white/ black plastic solid state seal and lead of commander/ cuckoo or other I.S.S. make with hinges or screw etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l. (A) With "P" trap (b)12.5 lit. low level P.V.C. cistern
4
-
-
Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. of parry hindustan or any other ISS approved make with 100mm HCI p trap 15 litres CI pull and let go flushing cistern of names or other ISS equivalent make complete with all fittings CI or C C bracket 32mm alkethene / PVC telescopic flush pipe about 2m long with one brass coupling and clamps GI chain and pull including supplying and fixing a pair of vitreous white glazed earthenware footrest to be fixed in floor 15mm CI body brass spindle stop cock of weight not less than 50 grames 15mm PVC connection pipe 450mm long and coat of red oxide primer etc all complete as per specification and direction of E/I.
(C) 450 mm long
with 12.5 litre low level PVC cistern
8
-
-
Supplying, fitting and fixing flat back or angular lipped front vitreous white glazed earthern ware urinal of Hindustan "Parry" or any other approved ISS make with 5 ltrs. Capacity C.I. automatic fushing cistern of reliance for any other ISS approved make with all fittings with C.I. or RS brackets standard size G.I. flush pipe with fitting clamps 15mm C.I. body brass spindle stop cock of approved quality weight not less than 400 gms. 15mm PVC alkethene pipe 450mm long with brass coupling at both ends and doing plumber points including painting of exposed part with two coats of approved paint over a priming coat of red oxide cutting wall and floor making good the same etc. all complete as per speciifcification and direction of E/I. Flat back or standing corner (600X350mm)
12
-
-
Earth work in excavation for laying of different types and sizes of R C C spun pipes witln disposal of excavated earth within initial lead and lift as per specification and direction of E/!
8.0X3X.6=1.44
1.44
-
-
Labour for laying, fitting and fixing NP2 R C C. spun pipe with collars in lines, level and grans
and providing approved jointing materials and joints properly filled to make them leak proof including providing signt rats, borning rod, night guard red light and barriei- etc. all complete as
per soecification and direction of E/l
-
-
-
150 mm dia R.C.C SPUN PIPE
up to 3.0 m depth of invert below G.L.
14
-
-
Providing and fixing one piece construction white vitreous china squatting plate with an integral logitudinal flushing pipe white PVC automatic flushing cistern with fittings, standard size G.I./PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I. glamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required
12
-
-
Provding and Fixing male ended 15mm dia brass bib cock of approved aua!ity (wt not less 350 gms with extra socket all compera as per specification and direction of E/I
2
-
-
supplying fitting and fixing vitreous white glazed earthen ware wash hand basin of parry or hindustan or any other I.S.S approved make supported on painted C.I OR R.S bracket 32mm C.I brass waste 15mm dia C.I body brass spindle stop cock of approved quality of weight not less than 350 grames, 32mm PVC wate pipe 750mm long with brass coupling with one end and making plumber joints etc.all complete as per specification and direction of E/I.
16
-
-
Supplying, fitting and fixing gun metal full way valve of approved quality all complete as per specifcation and direction of E/I.
-
-
-
20mm dia.
12
-
-
25mm dia.
12
-
-
32mm dia
12
-
-
40mm dia
12
-
-
Providing and fixing G M non return valve Horizontal / vertical type of approved quality as per specification and direction of E/T ( Horizonal 25mm dia)
2
-
-
Providing and fixing brass stop cock of approved quality all complete as per specification and direction of E/I. … 15mm dia.
6
-
-
Cutting chajjas or concrete for laying PVC Pipe and restoring the same with R.C.C. (1:2:4) brick work in cement Mortar (1:4) and cement plaster 1:4 as per specifiction and direction of E/I
25
-
-
Making holes in walls for PVC Pipe and restoring the same atfer pipe Laying (b) 250mm thick wall
30
-
-
Cutting drain width wise above GL for laying PVC pipe and restoring brick work in cement mortar (1:4) 12mm cement plaster in C.M. (1:4) with neat cement punning as per specifciation and direction of E/I. (PVC 110mm dia)
10
-
-
Making holes in wall for laying PVC pipes and restoring the same all cost complete (PVC pipe 250mm dia)
12
-
-
Supplying all tolls and labour and cutting chajja cornice for laying PVC pipes and making good the same as per specification and direction of E/I.
12
-
-
Supplying, fitting and fixing bathroom fittings of approved make and as per IS specification all cost complete as per direction of E/I. (all rates have been adopted from the basic rate from SOR + 30% for labour and Contractors profit)
-
-
-
Pillar cock (long neck) (Basic rate Rs.806.00 + 30% for C.P. & laying charge)
27
-
-
Bib cock - long thread (Basic rate Rs.728.015 + 30% for C.P. & laying charge)
28
-
-
Angular stop cock L.T.(Basic rate Rs.610.65.00 + 30% for C.P. & laying charge)
31
-
-
4 way diverter for concealed fittings (Basic rate Rs.2037.95 + 30% for C.P. & laying charge
26
-
-
Glass shelf (Basic rate Rs.683.55 + 30% for C.P. & laying charge
15
-
-
Flush valve complete with 32mm size control cock & flange (Basic rate Rs.3499.85 + 30% for C.P. & laying charge
26
-
-
32mm dia. PVC waste pipe 750mm long with cushion (Basic rate Rs.75.55 + 30% for C.P. & laying charge
31
-
-
15mm C.P. nipple with coupling(As per JSR 15 basic rate Rs.87.20 + 30% C.P. & laying charge)
26
-
-
Steel jali - 100mm dia. (Basic rate Rs.41.00 + 30% for C.P. & laying charge
26
-
-
Providing Solvent cement (as per JSR 15 basic item - 240.00 + 30% C.P & laying charge
26
-
-
Supplying, fitting and fixing Mirrors of 6mm thick plate glass bevelled edge mirror including C.P. brass revolving fittings 3mm ply wood board and C.P. hinges to fix with mirror. 600 X 450mm
1
-
-
Supplying, fitting and fixing Mirrors of 6mm thick plate glass bevelled edge mirror including C.P. brass revolving fittings 3mm ply wood board and C.P. hinges to fix with mirror. 600 X 450mm
6
-
-
Supplying, fitting and fixing C.P. brass towel rail 20mm X 600mm with bracket container
5
-
-
Supplying, fitting and fixing C.P. brass soap dish container medium quality with screw and hinges etc.
5
-
-
Providing and fixing Pressure adjustable shower with revolving joint (Basic rate Rs.817.55 +10% for C.P.)
4
-
-
Providing and fixing 15mm dia and 45cm long PVC connection pipe with heavy quality brass coupling at both ends etc all complete as per specification and direction of engineer in charge
62
-
-
Supplying, materials and labour for constructing inspection chamber of designation class 75B bricks size 750mm deep, 600X450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600X475mm G.I. cover with frame (weight not less than 35kg) alongwith earth work in excavation and 80mm thick PCC (1:3:6) in foundation and refilling all complete as per specification and direction of E/I.
8
-
-
Providing and fixing C.P. brass bib cock of approved quality conforming to IS 8931, 15mm dia nominal bore of approved brand C.P. fittings
60
-
-
Providing and fitting C.P. brass angle vale basin mixer and geyer points of approved qulity confirming to IS 8931 15mm nom inal bore approved brand C.P. fittings
4
-
-
Providing and fixing PTMT extension nipple 15mm size with 12" BSP thread 70mm length and 30mm breadth and weighing not less than 18gms of approved make
60
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supo\ply , including all CPVC slain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing Thus includes jointıng of Popes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge 25mm normal dia Pipes
25
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i.e fixing the pipe with clamps at 1Mtr. Spacing. This includes jointing of the pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. Concealed work including cutting chases and making good the walls etc.
-
-
-
15mm nominal bore
5
-
-
20mm nominal bore
55
-
-
25mm nominal bore
60
-
-
32mm nominal bore
60
-
-
External work - 40mm nominal bore
30
-
-
External work - 50mm nominal bore
30
-
-
Providing & fixing on wall face unplasticised - Rigid P.V.C. pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion . Single socketed pipes. 110 mm dia
150
-
-
Providing and fixing on wall face unplaqsticised- PVC moulded fitting/ accessories for unplaqsticised- PVC rain water pipes confirming to IS: 13592 TYPE A,including jointing with seal ring confirming to IS: 5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
Single Tee with door
-
-
-
110x110x110 ,mm
20
-
-
Bend 87.5 degree
-
-
-
110 mm bend
20
-
-
Providing and placing on terrace (at all floor levels) (PVC) Polyethylene water storage tank ISI 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
5500
-
-
Making soak pit 2.5M diameter 3 mtr. deep with 45X45cm dry brick honey comb shaft with brciks of class designation 75 and S.W. drain pipe 100mm diamter 1.8 mtr. long complete as per standard design with FPS bricks
2
-
-
Supplying and fixing PVC fittings of approved make confirming to IS : 1729 including supplying nails and bobbins, fixing solutions including earth work or masonary work cutting and remaking and providilding as the case may be all complete as per specification and direction of E/I.
-
-
-
PVC plain bend 100mm dia.
65
-
-
PVC double junction with door and ear 100mm dia.
50
-
-
PVC cowl - 100mm dia.
45
-
-
Floor trap - 100mm dia.
14
-
-
Ring rubber
12
-
-
Lubricant
25
-
-
Door piece
20
-
-
BOREWELL
-
-
-
Cost of Drilind 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressureand equipmentsas well as fule, lubricantsand cost of transportation of rig machine and other vehical up to Site.
-
-
-
(a) From 0.00 M to 50.00 M below G.L.
100
-
-
(b) From 51.0 M to125.00 M
260
-
-
Supplying all tools, tackles & lowering of 200 mm dia MS ERW casing pipe of 6 mm wall thickness including welding charges, cost of Pipe etc. including all taxes, VAT, Excise duty, Fright charges with inspection charges etc. as applicable, etc. all complete Jobs.
50
-
-
Development of tube well in accordance with IS : 2800 (part I) andIS: 11189, to establish maximum rate of usable water yield withoutsand content (beyond permissible limit), with required capacity aircompressor, running the compressor for required time till well isfully developed, measuring yield of well by "V" notch method or anyother approved method, measuring static level & draw down etc. bystep draw down method, collecting water samples & getting testedin approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessoriesetc., all as per requirement and direction of Engineer-in-charge
4
-
-
Supplying all materials, labours, tools & equipments for fitting & fixing 200 mm dia M.S.Cap over Casing Pipe including all taxes, VAT, Excise duty, Fright charges with inspection charges etc. as applicable, etc. all complite Jobs.
2
-
-
Supplying 100 mm dia Submersible Pump Set Conforming to IS : 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and Polypropylene / Noryl impeller. Motor suitable for working on 415V+10%, 3PH, 50Hz, A.C. Supply with cable guard, thurst carbon / fiber bearing to with stand entire hydraulic thrust, water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall be suitable outlet as per manufacturers design. Anti thurst stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single / double run shall be provided with each pump.
-
-
-
Submersible Pump set 100 mm dia (
with Polypropylene / Noryl impeller ) up to 20 stages.
-
-
-
2 HP
2
-
-
Supplying installing and comissioning of pannel board suitable for motor pump set as mentioned in the item no 5 , having voltmeter, ammeter, phase indicating lamp, starter, main switch fuse inter connection in the panel board including cost of wire etc. all complete job as per specifcation and direction of E/i
2
-
-
Cosat of pvc insulated copper sunmersible cable (2.5 sq. mm X3 core ) of finolex or equivalent make including lowering and making water proofing joints including all taxes and transportation to work site etc as per specificationand direction E/I
160
-
-
G.I.FITTINGS ( CONFORMING TO I.S. - 1979 (K) G.I. PIPES ( TATA MARK ) OR EQUIVALENT
400
-
-
Total Schedule Item (A)
-
-
-
NON SCHEDULE ITEM
-
-
-
Supplying of Co2 type fire existnguisher 4.5 kg
40
-
-
supply of 6kg ABC (powder type) fire extinguisher
40
-
-
S/F/F 250 Watt HPSV Fitting Complete Set
1
-
-
S/F 32 AMP D.P switch Flush Type
1
-
-
S upp!y and fixing NP2 hume Pine etc( 150mm Dia)
8
-
-
Fully Electronic 50 MT Weighbridge
Supply, installation, testing,,Commissioning design & drawing of fully electronic weighbridge, the platform should be closed rib orthotropic structure with shot blasting surface preparation before two coats of epoxy paint. The load cell should be made in India. The indicator should be made in India and should have email facility through GPRS communications. As per IS 2062 standard approved complete all as per specification below, design drawing & direction of E/I.
Capacity – 50 MT (pitless)
Platform size – 8 mtr x 3 mtr with fully welded modules U beam 300mmx140mm minimum./ Virgin material (Steel) of U beams Jindal/Essar/SAIL/TATA only
Top Plate:10 mm
Accuracy : +/– 5Kg
Provided item/component
a) Digital (IT) – 1 No. ( Should have in-built memory of 2.0 Lakh plus transactions/ multi-level password protection/ no need to use computer/fully grapical LCD display)
b) Load cell - 4Nos. ( min. capacity 30T each/cup & ball type shear beam/ Analog type/ IP68)
c) Junction box -1 No. ( High protection with in built lightning protection/IP 67)
d) Load cell Mounting assembly- 4No. ( With in-built lightning protection)
e) Printer -TVS make ( Dot matrix type ) – 1 No.
f) Jumbo display- 50mm - 1 no.
1
-
-
Supply , fabrication, installation, design & drawing of self-supported arch shaped Galvalume / Zincalume steel sheet roofing 1.00 MM thick (BMT) (only + - 0.2mm tolerance allowed) and 1.075 MM thick ( total thickness) (only +- 0.2 MM tolerance allowed ) tensile strength 350 MPa coating mass 150 gm per sqm etc. of approved make. The manufacture shall follow the IS code 15961, type III with Super Durable Polyester Paint, IS, code 513, IS code 16163 and all other relevant Indian codes complete all as per Approved specification, design, drawing & direction of E/I.
a) Width = 15 mtr
b) length = 42 mtr
c) Arch Height = 3 mtr
d) Arch length = 17.4 mtr
e) column Height = 5.6 mtr
f) No of NOS = 1 NOS
g) Thickness = 1.00 mm
3250
-
-
TURBO VENTILATOR WITH SKY COLOUR
15
-
-
SUPPLY OF HANGERS/CLAMP
60
-
-
Add 18% GST
18
-
-
Add 1% Labour cess 1%
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements