State Building Construction Corporation Limited Tender
Search from across the categories, cities, and authorities to find the latest Jharkhand tenders. Every Jharkhand tender is curated from credible sources of government websites (eProcurement Jharkhand portal) and newspapers, thus ensuring the credibility of the information presented to you. For more information on Jharkhand tender bidder registration, the login process and more read the FAQs section on this page.
Costs
EMD
₹ 6,28,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_JSBCC_91173_2Bid Award Id
ViewTender No
JSBCCL/43/2024-25Tender Authority
State Building Construction Corporation Limited ViewPurchaser Address
-Website
http://jharkhandtenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Providing coarse clean sand in filling in foundation trenches or plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts includng cost of all materials, Labour, rotalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume).
92.51
-
-
Providing designation 75Bwork in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.m. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials ranking out joints to 15mm depth, curing taxes and royalty all complete as per building specification and direction of E/I.
22.57
-
-
Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.
654.89
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size)
45.63
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
66.44
-
-
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately.In case the cement content in design mix is more than 1.10% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.Concrete of M25 grade with minimum cement content of 330 kg /cum
182.12
-
-
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
289.01
-
-
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers
280.83
-
-
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately.In case the cement content in design mix is more than 1.10% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.Concrete of M25 grade with minimum cement content of 330 kg /cum
742.14
-
-
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts
1003.83
-
-
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers
1488.51
-
-
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform
2608.79
-
-
Centering and shuttering including strutting, propping etc. and removal of form for Stairs, (excluding landings) except spiral-staircases
133.64
-
-
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers
211.7
-
-
Centering and shuttering including strutting, propping etc. and removal of form for Weather shade, Chajjas, corbels etc., including edges
240.41
-
-
Providing Tor steel reinforcement of 8mm dia to 32mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL)
-
-
-
8# dia bar @ 25%
35.4
-
-
10# dia bar @ 30%
42
-
-
12#-25# dia bar @ 45%
63.04
-
-
Add for using extra cement in the items of design mix over and above the specified cement content therein.
415.92
-
-
Providing designation 75A brick work in C.M (1: 6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I.
30.42
-
-
Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size).
77.08
-
-
Providing designation 75 A brick work in C.M. (1: 6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.
762.91
-
-
Providing designation 125mm thick reinforced designation 75A brick work in (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening carriage of materials, scaffolding, raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement0 all complete as per building specification and direction of E/I.
235.6
-
-
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
5.06
-
-
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
235.6
-
-
Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification & direction of E/I
42.53
-
-
Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I.
121.26
-
-
Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I.
3923.77
-
-
Providing 6mm thick cement plaster (1:4) in ceiling with clean of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
2185.15
-
-
Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I.
2917.83
-
-
Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I.
121.26
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:
656.78
-
-
Providing and fixing fan hooks of 16mm dia M.S. bar & 1 meter long, bent torequired size and shape, placed in position and fixed in the R.C.C.slab/beam at the time ofcasting all complete as per building specification and direction of E/I.
96
-
-
Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm .
2304.59
-
-
Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :
745.46
-
-
Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :
99.14
-
-
Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :
64.13
-
-
Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I.
476.21
-
-
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.
119.55
-
-
Supplying, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows skylights, fanlights and C/W celetial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all completeas per building specification and direction of E/I.
2.37
-
-
Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush door shutter in door and windows with black board core blended with high quality phenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I.
700.98
-
-
Providing & Fixing decorative high pressure laminated sheet of plain I wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.
360.89
-
-
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other
Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood
powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
100.61
-
-
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/ kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately)
32.53
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
212.88
-
-
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum
thickness of powder coating 50 micron)
184.64
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)
195.5
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm)
22.31
-
-
S/F M.S. grill made of 20 x 6mm M.S. flat as per approved design and drawing, properly fabricated with joints continous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction ofE/I. (Where materials is not supplied by the deptt.)
9569.44
-
-
Water proofing for Old and New Roof Slab :- Providing and laying water proofing treatment on roof slab by applying two Component, factory designed, ready to use, acrylic modified flexible
718.12
-
-
Covering of treated surface with PCC :- Providing 50 mm thick Cement Concrete M20(1:1.5:3) maintaining slope in alternate 2 mt x 2 mt panels with aaproved quality of stone chips of 20 mm
718.12
-
-
Providing and filling of 6 mm thickGroove between 25 mm PCC Panels with Polysulphide Sealant (Poring Grade)as per drawings and technical specifications and direction of E in Charge.(with 18%
718.12
-
-
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :
-
-
-
First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.
-
-
-
Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.
The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
72.03
-
-
Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I.
6108.93
-
-
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
1458.91
-
-
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
1458.91
-
-
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
7567.84
-
-
Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement area shall be multiplied by the co-efficient as indicated in building specification)
478.47
-
-
Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.
478.47
-
-
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
236.8
-
-
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with sea; ring conforming to IS:5382, leaving 10mm gap for thermal expansion, Single socketed pipes
110 mm Rain water pipe--waste pipe
320
-
-
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
Coupler 110 mm
61
-
-
Bend - 110mm
37
-
-
Shoe - 110
37
-
-
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete
110 mm
100
-
-
Providing 150mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 125mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.
138
-
-
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20mm nominal size ) over 75mm bad by dry brick ballast 40mm nominal size well rammend and consolidated and grouted with fine sand including finishing the top smooth.
82.8
-
-
CARRIAGE OF MATERIALS
-
-
-
Bricks Lead = 1 k+7 P(8km)
380094.85
-
-
Sand lead = 10 km
1001.07
-
-
Stone chips lead = 22 km
804.73
-
-
Stone metal lead = 22 km
100.73
-
-
Point Wiring in PVC Conduit, with Modular type Switch:- Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with modular type switch, modular plate, suitable size of GI box etc as required.
Group C
360
-
-
Supplying and fixing batten/ angle holder including connection etc. as required.
20
-
-
9/10 Watt LED Bulb
20
-
-
S.I.T.C of following rating recess/surface mounting round/square shape downlight with pressure die cast housing for single phase supply voltage. Luminaire shall conform to IS:3022 part-5/ section-5 or IEC:62722 with all necessary accesories as required.
-
-
-
80W LED Flood light
20
-
-
150W LED Flood light
8
-
-
S.I.T.C of following rating surface mounted LED tube lightfitting suitable for 230V 50Hz, single phase supply etc. complete as required.
20w/22w LED tube
60
-
-
SITC of 2x20W LED Tube light.
30
-
-
S.I.T.C of following rating recess/surface mounting round/square shape downlight with pressure die cast housing for single phase supply voltage. Luminaire shall conform to IS:3022 part-5/ section-2 or IEC:62722 with all necessary accesories as required.
-
-
-
2' X 2' LED Panel Light (34W)
70
-
-
18/20W LED Round Downlight
65
-
-
12" (300mm) Exhaust fan
20
-
-
Installation of exhaust fan upto 450mm sweep in the existing opening, including making the hole to suit the size of he above fan making good the damage, connection, testing, commisionig etc as required.
15
-
-
S/F Modular type electronic fan regulator :- Supplying and fixing stepped type fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required.
60
-
-
Ceilling fan 48"(1200mm)
96
-
-
S/F light plug point with modular type accessories :-
Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch connection, painting etc, as required.
150
-
-
S/F light plug point with modular type accessories :-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
48
-
-
S/F 20amps SPN MCB industrial Socket:-
Supplying and fixing 20 amps 240V, SPN industrial socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP MCB insheet steel enclosure on surace or in recess with chained metal cover for the socket outlet and complete with connections, testing & commissioning etc.
35
-
-
S/F Modular boxes, base & cover plate :-
Supplying and fixing following size/ modules G.I. box along with modular base & cover plate for modular switches in recess etc as required.
-
-
-
4 module (78mm x 140mm x 50mm)
20
-
-
6 module (78mm x 205mm x 50mm)
4
-
-
8 module (78mm x 230mm x 60mm)
8
-
-
12 module (135mm x 205mm x 60mm)
35
-
-
S/F Modular type blanking plate :-
Supplying and fixing modular blanking plate on the existing modular plate & switch box but excluding modular plate as required.
40
-
-
SUBMAIN WIRING COPPER IN PVC CONDUIT
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of PVC insulated copper conductor single core cable in surfacce/ recessed medium class PVC conduit.
-
-
-
4 X 16 sq. mm + 2 x 6 sq.mm Earth Wire
335
-
-
4 X 10 sq. mm + 2 x 6 sq.mm Earth Wire
150
-
-
CIRCUIT WIRING COPPER IN PVC CONDUIT FOR 5A, 15 A & SWITCH BOARD:-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of PVC insulated copper conductor single core cable in surfacce/ recessed medium class PVC conduit.
-
-
-
2 X 4 sq. mm + 1 x 4 sq.mm Earth Wire (Sockets)
1670
-
-
2 X 2.5 sq. mm + 1 x 2.5 sq.mm Earth Wire (Switch Boards)
735
-
-
Copper earth pipe electrode :-
Earthing with G.I. earth pipe 4.5mtr. long 40mm dia including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal or coke and salt as required.
4
-
-
P/F 25mm x 5mm copper earth strip in surface/ recess :-
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc., as required.
40
-
-
S/L 25 mm x 5 mm G.I. earth strip in ground :-
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including soldering etc.
25
-
-
P/F G.I. lightning conductor finial :-
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
1
-
-
G.I. earth plate electrode :-
Earthing with G.I. earth plate 600mm x 600mm x 3mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) as required.
1
-
-
P/ F G.I. Lightning conductor tape in horizontal run :-
Providing and fixing G.I. tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor complete etc. as required (horizontal run).
70
-
-
P/ F G.I. Lightning conductor tape in vertical run :-
Providing and fixing G.I tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor complete etc. as required (vertical run).
35
-
-
Laying copper/ G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.
70
-
-
Supply of following sizes and core PVC/XLPE insulated, PVC sheathed armoured electrical cable with aluminium conductor for working voltage upto 1.1 KV etc as required.
-
-
-
3.5c x 185 sq.mm
75
-
-
3.5c x 70 sq.mm
75
-
-
Laying of one nùmber PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size exceeding 35 sq mm but not exceeding 95 sqmm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
75
-
-
Laying of one nùmber PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size exceeding 95 sq mm but not exceeding 185 sqmm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
75
-
-
1.1 KV Cable End Termination:- Supplying and making indoor cable end termination with brass double compression gland and aluminium lugs for following size of PVC insulated XLPE Al. Ar. Cable of 1.1 KV grade as required.
-
-
-
3.5c x 185 sq.mm (57mm)
3
-
-
3.5c x 70 sq.mm (38mm)
3
-
-
S/F T.P. MCB DB:-
Supplying and fixing following way three pole & neutral ,sheet steel, MCB distribution board, 415 volts, onsurface /recess, complete with tinned copper bus bar, neutral bus-bar, earthbar ,dinbar, interconnections, powder painted including earthing etc. as required.
-
-
-
4 Way (4+12) Double Door, Horizontal type
8
-
-
6 Way (4+18) Double Door, Horizontal type
15
-
-
Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10kA 'C' curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connection, testing & commissioning etc. as required.
-
-
-
63A rating, TPN MCB, "C" curve 10 KA breaking capacity.
15
-
-
40A rating, TPN MCB, "C" curve 10 KA breaking capacity.
8
-
-
6/32A rating, SPN MCB, "C" curve 10 KA breaking capacity.
355
-
-
Supplying and fixing following rating four pole, (three phase and neutral) 415 volts, residual circuit breaker (RCCB) having a sensitivity current 30 milli amperes in the existing MCB DB complete with connection, testing & commissioning etc. as required.
-
-
-
25 amps
8
-
-
40 amps
15
-
-
MAIN DISTRIBUTION BOARD FOR SRC BUILDING
-
-
-
Design, Fabrication, Supply, Erection,Testing and commisioning of Powder coated Indoor Type Main Distribution Board fabricated out of 14 guage CRCA sheet steel in cubical, compartmentallised, free standing , dust and vermin proof, (degree of protection-IP54)with reinforcement of suitable size angle iron, channel, T -iron or flats as required. Cable gland plates shall be provided on top as well as bottom of the panels. Panels shall be treated with all anti-corrosive process before painting as per specification. Panels shall be suitable for 415V, 3-Phase, Four wire, 50 Hz supply complete with earth bus and lifting hooks as required in case of large panels.Approval shall be taken for each panel before fabrication. (All hardwares like nuts and bolts used shall be Galvanized and Zinc passivated) as per Specification.
-
-
-
The Main Distribution Board shall broadly comprise of the following equipment/components)
-
-
-
Incoming Feeders:-
-
-
-
Incomer-
250A, TPN MCCB (P-2), 35 kA for 1 sec (Ics=100%Icu) Breaking capacity (Variable thermal rating 80-100%, variable magnetic rating 6-10 times) with factory made silver plated copper spreading links- 1 No. (AC Mains)
100A, TPN MCCB (P-2), 16 kA for 1 sec (Ics=100%Icu) Breaking capacity (Variable thermal rating 80-100%, variable magnetic rating 6-10 times) with factory made silver plated copper spreading links- 2 Nos. (DG OG + Changeover)
-
-
-
Outgoing Feeders:-
-
-
-
63A TPN MCCB 16kA - 02 Nos.
-
-
-
40A TPN MCB 10kA - 10 Nos.
-
-
-
63A TPN MCB 10kA - 18 Nos.
-
-
-
300A TPN Copper bus bar in metal encolsure with fixing clamps
-
-
-
Indication lamps(On- Off Trip Power On -- RYB)
-
-
-
Supplying, Installing, Testing & Commisioning cost of Main Distribution Board for SRC cum Library building all complete with all necessary items as per direction of E/I.
1
-
-
Earthwork in excavation(As per I.S. 3114/1965 for laying of different types and sizes of pipe so as to give one meter average cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per specification and direction of E/I.
(a) For classification of soil item - A (50 x 0.6 x 0.6 )
24
-
-
Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification for soil item-A& B
24
-
-
Supplying and fixing male ended 15 mm dia brass bib cock of approved quality (wt. not less than 350 grms) with extra socket all complete as per specification and direction of E/I.
4
-
-
Providing and fixing brass/C.I. stop cock of approved quality all complete as per specification and direction of E/I.
(A) BRASS STOP COCK
(a) 15 mm dia
4
-
-
Providing and fixing Gun metal full way valve of approved quality, all complete, as per specification and direction of E/I.
-
-
-
32 mm and weight not less than 700 gms.
4
-
-
40 mm and weight not less than 1.0 kg.
4
-
-
Supplying, fitting and fixing viterious white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I. 'p' trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings C.I. or C.C. brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair or viterous white glazed earthenware footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less than exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. B) 510 mm lonq
a) With 15.0 lit. hiqh level C.l. cistern
10
-
-
Supplying, fitting and fixing 40mm highb viterous white glazed earthen E.W.C. with 'P' trap of parry hindustan or any other approved I.S.S. make including supplying and fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fitting with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stope cock of approved quality weight not less than 450 grams 15mm PVC alkathene pipe 45cm. long with brass coupling at both ends and white/black plastic soild state seal and lead of commander/cuckoo or other I.S.S. make with hinges or screws etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide priming all complete as per specification and direction of E/I.
With 'P' trap - 12.5 lit low level PVC Cistern
(li) E.W.C. with'S' trap
a) 12.5|it. low levelC.l. clstem
11
-
-
Supplying, fitting and fixing flat back or angular, lipped front viterous white glazed earthen ware urinal of 'Hindustan "Parry" or any other approved I.S.S. make with 5 liters capacity C.I. automatic flushing cistern of reliance for any other I.S.S. approved make with all fittings with C.I. or R.S., brackets, standard size G.I. flush pipe with fitting clamps, 15mm, C.I. body brass spindle stop cock of approved quality weight not less than 400 grams, 15mm P.V.C./Alkthene pipe 450mm long with brass coupling at both ends and doing plumber joints including painting coat of red oxide cutting wall and floor making good the same etc. all complete as per specification and direction of E/I.
(a)Flat back or Standing Cornar
2
-
-
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinalpartitions by cutting a chase of appropriate width with chase cutter andembedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.
Granite Stone of approved shade
8
-
-
Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S. approved make supported on painted C.I. or R.S. brackets 32mm C.I. brass waste, 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350 grams, 32mm PVC waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I.
20
-
-
Making holes in walls for laying H.C.I. pipes and restoring the same after pipe laying as per specification and direction of E/I.
-
-
-
(i)125mm thick wall
35
-
-
(ii)250mm thick wall
30
-
-
Supplying, fitting and fixing bathroom fittings of approved make and as per IS specification all cost complete as per direction of E/I. (all rates have been adopted from the basic rate from SOR + 15% for labour and Contractors profit) ALL JAGUAR FITTING
-
-
-
piller Cock (Long Neck) (for basin)
22
-
-
Bib cock (Long Thread)
16
-
-
Angular Stop Cock (Long Thread)
46
-
-
Concealed stop cock reduce (lSl Marked)
20
-
-
4 way diverter for concealed fittings
8
-
-
Telephonic shower flexible pipe
12
-
-
Towel Rail 24"
22
-
-
Tumbler Holder
22
-
-
Toilet Paper Holder
16
-
-
Glass shelf 22'
22
-
-
Earth work in excavation for laying of different types and sizes of R.C.C. spun pipes with disposal of exacavted earth within initial lead and sizes of R.C.C. spun pipes with disposal of excavated earth within initial lead and lift as per specification and direction of E/I.
(for classification of soil items A) = 2 X 50 X 0.60 X 0.45
35
-
-
Labour for alying, fitting and fixing NP2 R.C.C. spun pipe with colars in lines, level and grade and providing approved jointing materials and joints properly filled to make them leakproof including providing sight rails, bonning rod, night guard, Red light and barrier etc. all complet as per specification and direction of E/I.
(a) 150 mm dia pipe
100
-
-
Supplying labours, tools and tackles for testing of laid, R.C.C. spun pipes upto specified lead water all complete as per specification and direction of E/I. (water to be supplied free of cost departmentally). (iii) 225mm dia
100
-
-
Supplying materials and labours for constructing inspection chamber of designation class 75B bricks size 750mm deep, 600 x 450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600 x 475mm G.I. Cover with frame (weight not leaa than 36 kg) alongwith earth work in exacavation and 80mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per specification and direction of E/I.
4
-
-
Supplying laying fitting and fixing NP2 R.C.C spun pipes all complete as per direction of E/I.
70
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of
15 mm nominal outer dia
260
-
-
20 mm nominal outer dia
210
-
-
25 mm nominal outer dia
200
-
-
32 mm nominal outer dia
200
-
-
Providing and fixing PTMT grating of approved quality and colour. Circular type - 100 mm nominal dia
-
-
-
100 mm nominal dia
50
-
-
125 mm nominal dia with 25 mm waste hole
30
-
-
Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I.
Mirrors of 6mm thick glass bevelled edge mirror including C.P. brass revolving fittings 3mm ply wood board and C.P. hinges to fix with mirror
600mm x 450mm size
20
-
-
Polythene water storage tank of ISI mark (eg Sintex /Sinter /himgiri/gangotri etc with cover & locking system
40000
-
-
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
-
NON - SCHEDULE ITEMS
-
-
-
2 SEATER DESK CUM BENCH DESK SIZE OF BENCH : 1050MM(L)X 950MM(D)X 760MM(H) TOP, SEAT, BACK & MODESTY MADE OUT IN 18MM PLB WITH PVC EDGE BANDING AND UNDERSTRUCTURE FRAME MADE OUT IN 25X25X1.2MM SQUARE MS PIPE.
26
-
-
INSTRUCTOR TABLE SIZE: 1200X600X750MM Table size: 1200L x 600W x 750Ht. Table top made of 25mm thk. Prelam Particle board with PVC Edge banding. Table top supported on MS powder coated "C" shape legs with horizontal connectors.
1
-
-
VISITOR CHAIR Size:(W)520mm X (D)470mm X (H)930mm
Medium Back / Fabric Chairs / Cantilever Frame
1
-
-
2 SEATER DESK CUM BENCH DESK SIZE OF BENCH : 1050MM(L)X 950MM(D)X 760MM(H) TOP, SEAT, BACK & MODESTY MADE OUT IN 18MM PLB WITH PVC EDGE BANDING AND UNDERSTRUCTURE FRAME MADE OUT IN 25X25X1.2MM SQUARE MS PIPE.
26
-
-
INSTRUCTOR TABLE SIZE: 1200X600X750MM Table size: 1200L x 600W x 750Ht. Table top made of 25mm thk. Prelam Particle board with PVC Edge banding. Table top supported on MS powder coated "C" shape legs with horizontal connectors.
1
-
-
VISITOR CHAIR Size:(W)520mm X (D)470mm X (H)930mm
Medium Back / Fabric Chairs / Cantilever Frame
1
-
-
2 SEATER DESK CUM BENCH DESK SIZE OF BENCH : 1050MM(L)X 950MM(D)X 760MM(H) TOP, SEAT, BACK & MODESTY MADE OUT IN 18MM PLB WITH PVC EDGE BANDING AND UNDERSTRUCTURE FRAME MADE OUT IN 25X25X1.2MM SQUARE MS PIPE.
32
-
-
INSTRUCTOR TABLE SIZE: 1200X600X750MM Table size: 1200L x 600W x 750Ht. Table top made of 25mm thk. Prelam Particle board with PVC Edge banding. Table top supported on MS powder coated "C" shape legs with horizontal connectors.
1
-
-
VISITOR CHAIR Size:(W)520mm X (D)470mm X (H)930mm
Medium Back / Fabric Chairs / Cantilever Frame
1
-
-
2 SEATER DESK CUM BENCH DESK SIZE OF BENCH : 1050MM(L)X 950MM(D)X 760MM(H) TOP, SEAT, BACK & MODESTY MADE OUT IN 18MM PLB WITH PVC EDGE BANDING AND UNDERSTRUCTURE FRAME MADE OUT IN 25X25X1.2MM SQUARE MS PIPE.
38
-
-
INSTRUCTOR TABLE SIZE: 1200X600X750MM Table size: 1200L x 600W x 750Ht. Table top made of 25mm thk. Prelam Particle board with PVC Edge banding. Table top supported on MS powder coated "C" shape legs with horizontal connectors.
1
-
-
VISITOR CHAIR Size:(W)520mm X (D)470mm X (H)930mm
Medium Back / Fabric Chairs / Cantilever Frame
1
-
-
STEEL ALMIRAH CONVENTIONAL STORAGE
(L)900MM X (D)450MM X (H)1980MM
OFFICE STOREWELL WITH 4 SHELVES
GAUGE: BODY: 22 GAUGE *DOORS: 20 GAUGE
2
-
-
VISITOR CHAIR Size:(W)520mm X (D)470mm X (H)930mm
Medium Back / Fabric Chairs / Cantilever Frame
20
-
-
Main Table Size:1350Lx750Wx750HtSupplying and placing in position of the Desk work top made out of 25mm thick pre laminated MDF board with PVC edgebanding which shall be supported on side panels & modesty panels. Side’s panels and Modesty panel should be made from 18mm thick pre laminated MDF board of approved shade. All working or non working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Provision of one Pedestal Unit (size:- L-400mm x D-450mm x H-600mm) with a combination of 2 drawer & one filing drawer. The pedestal storage unit shall be made of 18 mm thick prelaminated MDF board with provision of handles & Locking arrangement. Complete as per image and specification under the guidance of Engineer in charge.
3
-
-
MEDIUM BACK REVOLVING CHAIR
G.F. NYLON STURCTURE WITH NYLON NET ON BACK HIGH DENSITY CUSHION ON SEAT FIXED HANDLES SYNCHRO TILT MECHANISM WITH SINGLE ANGLE *LOCKING FACILITY GASLIFT FOR HEIGHT ADJUSTMENT 5 PRONG NYLON BASE WITH CASTORS
MB : (W)660mm X (D)508mm X (H)990mm
3
-
-
STEEL BOOKSHELF 4 DOOR GLASS BOOK CASE (L)838MM X (D)305MM X (H)1676MM
BOOKCASE 4 DOORS WITH CAM
BODY: 22 GAUGE * DOORS: 20 GAUGE
2
-
-
INSTRUCTOR TABLE SIZE: 1200X600X750MM Table size: 1200L x 600W x 750Ht. Table top made of 25mm thk. Prelam Particle board with PVC Edge banding. Table top supported on MS powder coated "C" shape legs with horizontal connectors.
4
-
-
Computer Table consists of Computer table with key board drawer and table top- Computer Table Top 18mm Thick PLPB Board With 2mm Thick Pvc Edgebanded Finish With As Per Approved Laminate Shade. Top Supported Understructure Of Table Gable - End Made Of Prime Quality 18mm Thick PLPB Board. Top Size 800W X 450D. 18mm Thick PLPB Wooden Shelve Fix In Table under Table Top . Right Hand Side Provided L Shape Shelve Use For CPU & UPS . Shelve Used Sliding Telescopic Channel With All Fittings.
Table , Shelve & Sides Panels Flat Edge Duly Sealed With Pvc Beading . 50mm High Wooden Panel Skirting Provided in Computer Table . 7mm High Pvc Bofurs Screw With Gable . All Wooden Panels , Gables & Modesty Fix Joints With Minifix Dowels & Other Fitting Equipment . Wooden Panels Cleaning Corner Knitted Finish . All Wooden Panels Prime Quality Board With ISI Marked . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design.
4
-
-
2 SEATER DESK CUM BENCH DESK SIZE OF BENCH : 1050MM(L)X 950MM(D)X 760MM(H) TOP, SEAT, BACK & MODESTY MADE OUT IN 18MM PLB WITH PVC EDGE BANDING AND UNDERSTRUCTURE FRAME MADE OUT IN 25X25X1.2MM SQUARE MS PIPE.
78
-
-
INSTRUCTOR TABLE SIZE: 1200X600X750MM Table size: 1200L x 600W x 750Ht. Table top made of 25mm thk. Prelam Particle board with PVC Edge banding. Table top supported on MS powder coated "C" shape legs with horizontal connectors.
3
-
-
VISITOR CHAIR Size:(W)520mm X (D)470mm X (H)930mm
Medium Back / Fabric Chairs / Cantilever Frame
3
-
-
2 SEATER DESK CUM BENCH DESK SIZE OF BENCH : 1050MM(L)X 950MM(D)X 760MM(H) TOP, SEAT, BACK & MODESTY MADE OUT IN 18MM PLB WITH PVC EDGE BANDING AND UNDERSTRUCTURE FRAME MADE OUT IN 25X25X1.2MM SQUARE MS PIPE.
78
-
-
INSTRUCTOR TABLE SIZE: 1200X600X750MM Table size: 1200L x 600W x 750Ht. Table top made of 25mm thk. Prelam Particle board with PVC Edge banding. Table top supported on MS powder coated "C" shape legs with horizontal connectors.
3
-
-
VISITOR CHAIR Size:(W)520mm X (D)470mm X (H)930mm
Medium Back / Fabric Chairs / Cantilever Frame
3
-
-
2 SEATER DESK CUM BENCH DESK SIZE OF BENCH : 1050MM(L)X 950MM(D)X 760MM(H) TOP, SEAT, BACK & MODESTY MADE OUT IN 18MM PLB WITH PVC EDGE BANDING AND UNDERSTRUCTURE FRAME MADE OUT IN 25X25X1.2MM SQUARE MS PIPE.
78
-
-
INSTRUCTOR TABLE SIZE: 1200X600X750MM Table size: 1200L x 600W x 750Ht. Table top made of 25mm thk. Prelam Particle board with PVC Edge banding. Table top supported on MS powder coated "C" shape legs with horizontal connectors.
3
-
-
VISITOR CHAIR Size:(W)520mm X (D)470mm X (H)930mm
Medium Back / Fabric Chairs / Cantilever Frame
3
-
-
2 SEATER DESK CUM BENCH DESK SIZE OF BENCH : 1050MM(L)X 950MM(D)X 760MM(H) TOP, SEAT, BACK & MODESTY MADE OUT IN 18MM PLB WITH PVC EDGE BANDING AND UNDERSTRUCTURE FRAME MADE OUT IN 25X25X1.2MM SQUARE MS PIPE.
96
-
-
INSTRUCTOR TABLE SIZE: 1200X600X750MM Table size: 1200L x 600W x 750Ht. Table top made of 25mm thk. Prelam Particle board with PVC Edge banding. Table top supported on MS powder coated "C" shape legs with horizontal connectors.
3
-
-
VISITOR CHAIR Size:(W)520mm X (D)470mm X (H)930mm
Medium Back / Fabric Chairs / Cantilever Frame
3
-
-
2 SEATER DESK CUM BENCH DESK SIZE OF BENCH : 1050MM(L)X 950MM(D)X 760MM(H) TOP, SEAT, BACK & MODESTY MADE OUT IN 18MM PLB WITH PVC EDGE BANDING AND UNDERSTRUCTURE FRAME MADE OUT IN 25X25X1.2MM SQUARE MS PIPE.
114
-
-
INSTRUCTOR TABLE SIZE: 1200X600X750MM Table size: 1200L x 600W x 750Ht. Table top made of 25mm thk. Prelam Particle board with PVC Edge banding. Table top supported on MS powder coated "C" shape legs with horizontal connectors.
3
-
-
VISITOR CHAIR Size:(W)520mm X (D)470mm X (H)930mm
Medium Back / Fabric Chairs / Cantilever Frame
3
-
-
Add GST 18 %
18
-
-
Add Labour cess 1%
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements