Road Construction Department Tender
... More
The RCD has issued a formal invitation for competitive bids for the Road Construction Department project, for Improvement Of Riding Quality Work Of Nathpur Marda Tukutoli Bagma Road 0.00 To 20.750 Km in Gumla, Jharkhand, with an estimated contract value of Rs. 13,19,70,758. The bid opening date for this tender is 03-06-2025 and the last date for bid submission is 24-06-2025. Interested bidders for Road Construction Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
AI Insights
Technical
Technical
Financial
Additional Eligibility
Bid Capacity
... View More
The formula for bid capacity is: Available Bid Capacity = (N x (Annual Turnover - B)) Where: N = Number of years prescribed for completion of the works for which bids are invited.
B = Value of existing commitments and on-going works to be completed during the next 06 months (period of completion of the works for which bids are invited)
Technical Capacity
... View More
The required prior work experience for the bidder includes experience in works of a similar nature and size for each of the last five years. The bidder should have completed works with a value that can be compared to the current contract. Specifically, the bidder should have experience in the following areas: - Particular Construction Experience - Personal Capabilities - Equipment Capabilities - Financial Capabilities The Lead partner in a Joint Venture should meet the qualifying criteria in proportion to the partnership in JV but not less than 50%. The Joint Venture must satisfy collectively the criteria, and the data of each member may be added together to meet the collective qualifying criteria. The bidder should have achieved a minimum annual financial turnover of at least one and a half times the estimated cost of the project in any one year. They should have also satisfactorily completed at least one similar work of value not less than 50% of the estimated value of the contract in the last five years, with a completion rate of not less than 90% of the contract value. The bidder should have executed in any one year, the minimum quantities of the following items of work: - Earth work: 4155.30 Cum
- Bituminous Work: 4643.86 Cum The bidder should have completed a project of at least 50 percent of the contract value within the last five years, with a value of 659.85 Lacs. The bidder's key personnel should have the following experience:
- Plant Engineers: BE Mech. with at least 10 years experience OR Diploma Mech. with at least 15 years experience
- Project Manager: 5 years experience as Manager and BE Civil with at least 15 years experience
- Site Engineer: 5 years experience in Road Construction and BE Civil with at least 10 years experience The required prior work experience for different personnel is as follows:
- Project Manager: B.E. Civil + 15 Years Exp. (5 years as Manager)
- Site Engineer: B.E. Civil + 10 Years Exp. (5 years in Road Construction)
- Plant Engineer: B.E. Mech. + 10 Years Exp. Or Dip. Mech. + 15 years Exp.
- Quantity Surveyor: B.E. Civil + 7 Years Exp. Or Dip. Civil + 10 years Exp.
- Soil and Material Engineer: B.E. Civil + 10 Year Experience
- Survey Engineer: B.E. Civil + 5 Year Experience or Diploma in Civil + 8 years Experience The bidder is required to invest a minimum cash up to 25% of the value of the work during implementation of the Contract. The bidder should also have access to or availability of credit facilities, which should be at least 10% of the estimated cost. The value and percentage of similar works completed are as follows:
- At least one similar work of value not less than 50% of the estimated value of the contract in the last five years, with a completion rate of not less than 90% of the contract value.
- A project of at least 50 percent of the contract value within the last five years, with a value of 659.85 Lacs. - Minimum quantities of the following items of work: - Earth work: 4155.30 Cum - Bituminous Work: 4643.86 Cum
Costs
EMD
₹ 13,20,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Summary
Improvement Of Riding Quality Work Of Nathpur Marda Tukutoli Bagma Road 0.00 To 20.750 Km
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_CECOM_101557_1Tender No
RCD/GUMLA/325/2025-26Tender Authority
Road Construction Department ViewPurchaser Address
-Website
http://jharkhandtenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Dense graded Bituminous Macadam Grading-II With VG-30 Bulk Bitumen Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @4.5 percent by weight of total mix and filler, transporting the hot mix to work site laying with a hydrostatic paver finisher with sensor control to the required grade level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause no. 505 complete in all respects with VG-30 Bulk Bitumen..
5813.42
-
-
... More
Bituminous concrete Grading- II With VG-30 Bulk Bitumen Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @5.4 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment , rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause no. 507 complete in all respects with VG-30 Bulk Bitumen.
3474.3
-
-
... More
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.)
4218.75
-
-
... More
Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of class-B Type IV retro reflective sheeting fixed cover 2 mm thick aluminium sheeting vide clause 801.3, 3mm/4mm thick aluminium composite material sheet depending on the size of the sign fixed over back support frame of min 25 x 25 x 3 mm Angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67. 60 cm circular
20
-
-
... More
Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of class-B Type IV retro reflective sheeting fixed cover 2 mm thick aluminium sheeting vide clause 801.3, 3mm/4mm thick aluminium composite material sheet depending on the size of the sign fixed over back support frame of min 25 x 25 x 3 mm Angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67., 90 cm equilateral triangle..
20
-
-
... More
Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of class-B Type IV retro reflective sheeting fixed cover 2 mm thick aluminium sheeting vide clause 801.3, 3mm/4mm thick aluminium composite material sheet depending on the size of the sign fixed over back support frame of min 25 x 25 x 3 mm Angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67. 60 cm x 45 cm rectangular..
60
-
-
... More
Retro- reflectorised Traffic signs (Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing) 80 mm x 60 mm rectangular
10
-
-
... More
Direction and Place Identification Signs upto 0.9 sqm Size Board.(Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4 mm with area not exceeding 0.9 sqm fixed over back support frame of min 35 x 35 x 3 mm Angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing)
7.0200000000000005
-
-
... More
Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of class-B Type IV retro reflective sheeting fixed cover 2 mm thick aluminium sheeting vide clause 801.3, 3mm/4mm thick aluminium composite material sheet depending on the size of the sign fixed over back support frame of min 25 x 25 x 3 mm Angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67. 60 cm x 60 cm square
20
-
-
... More
Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of class-B Type IV retro reflective sheeting fixed cover 2 mm thick aluminium sheeting vide clause 801.3, 3mm/4mm thick aluminium composite material sheet depending on the size of the sign fixed over back support frame of min 25 x 25 x 3 mm Angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67. 90 cm high octagon
10
-
-
... More
Road Delineators (Supplying and installation of delineators (Road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 and the drawings.)
400
-
-
... More
Metal Beam Crash Barrier Type - A, "W" : Metal Beam Crash Barrier (Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 811)
525
-
-
... More
Kilometre Stone (Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc) 5th kilometre stone (precast)..
2
-
-
... More
Kilometre Stone (Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc) Ordinary Kilometer stone (Precast)..
2
-
-
... More
Painting Two Coats on New Concrete Surfaces (Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces)
524.84
-
-
... More
Plastering with cement mortar (1:3) on brick work in substructure as per technical specifications
86.8
-
-
... More
Solar Powered Road Marker (Solar Stud) Supplying of Solar Raised Pavement Markers made of polycarbonate molded body with circular shape, solar powered, LED self illumination in active mode 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode.The marker shall support a load of 20000 kg tested in accordance to ASTM D 4280.The marker should be resistant to dust and water ingress according to IP 65 standards and should withstand temperatures in the range of 0 C to 70 C. Color of lighting could be provided in red or yellow (amber) as per requirement and typical frequency of blinkikng in 1 Hz.There should be current losses of less than 20 microamperes at 2.4 V in sleepcharging mode to enhace the life of the marker and a full charge should provide for a minimum autonomy of 50 hours.The height, width and length of the marker shall not be less than 10mmx100mmx100 mm. Also, the surface diameter of the marker shall not be less than 100 mm respectively.The weight of the marker shall not exceed 0.5 Kilograms.Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive and complete as directed by the engineer.)
3458
-
-
... More
Printing New Letter and Figures of any Shade (Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade) Hindi ( Matras commas and the like not to be measured and paid for Half letter shall be counted as half )
2030
-
-
... More
Printing New Letter and Figures of any Shade (Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even hade) English and Roman (Hyphens and the like not to be measured and paid for)
2030
-
-
... More
Providing two coats of snowcem of approved shade and make over old surface
225.14
-
-
... More
Aluminium sheeting fixed with encapsulated lens type reflective sheeting including 2% towards lettering, cost of angle iron, cost of drilling holes, nuts, bolts etc.and signs as applicable
4.5
-
-
... More
Add 18 % GST :
12
-
-
... More
Add 1% Labour Cess:
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%