Police Housing Corporation Limited Tender
... More
Search from across the categories, cities, and authorities to find the latest Jharkhand tenders. Every Jharkhand tender is curated from credible sources of government websites (eProcurement Jharkhand portal) and newspapers, thus ensuring the credibility of the information presented to you. For more information on Jharkhand tender bidder registration, the login process and more read the FAQs section on this page.
Costs
EMD
₹ 83,000Document Cost
₹ 5,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_JPHCL_95242_1Bid Award Id
ViewTender No
JPHCL/GR 03/NIT 11/2024-25Tender Authority
Police Housing Corporation Limited ViewPurchaser Address
-Website
http://http://jphcl.jhpolice.gov.in/en/home/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
5.7.3
Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I
363.36
60245
165.8
... More
5.7.6
Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I
178.83
32915
184.06
... More
5.10.10
Taking down old door and window shutters including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I
18
812
45.12
... More
5.10.11
Taking down chaukhats in doors including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I
9
808
89.88
... More
5.10.12
Taking sown chaukhats in windows including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I
9
1242
138.07
... More
DSR 10.14
Providing and fixing pressed steel door frames conforming to IS: 4351 manufactured from commercial mild steel of 1.60 mm thickness including hings , jamb , lock jamb, bead and if required angle threshold of mild steel angle od section 50x25mm or base ties of 1.60 mm pressed mild steel welded or rigidly togather by mechnical means including M.S pressed butt hiongs 2.5 mm thick with mortar guards , lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre treatment of the surface as directed by Engineer - in-charge. Profile B
46.5
22143
476.21
... More
5.4.34
Supplying, fitting & fixing 30mm thick solid core type decorative single leaf flush door shutters in doors with both side decorative venier with black board core bended with high quality in all formaldehyde synthetic resin of standered with aluminium fittings such as hinges, tower bolts, handle, cleats aldrop, door stopper & sand blocks & taxes all complete as per detail drawing building specification & direction of the E/I.
18.27
37222
2037.34
... More
DSR 13.68
French spirit polishing :
13.68.1 Two or more coats on new works including a coat of wood
36.54
13312
364.32
... More
DSR 22.22 A
Providing and applying fibre reinforced elastomeric liquid waterproofing membrane with resilient acrylic polymers having Sun
Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric
waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The
operation shall be carried out after scrapping and properly cleaning
the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge.
124.91
57422
459.71
... More
DSR/22.14
Grading roof for water proofing treatment with
22.14.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand :
4 graded stone aggregate 20mm nominal size)
9.37
61520
6565.73
... More
DSR 21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
... More
DSR 21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
21.1.2.3 Polyester powder coated aluminium
(minimum thickness of polyester powder
coating 50 micron)
88.8
46647
525.31
... More
DSR 21.3
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
21.3.1 With float glass panes of 4.0 mm thickness
13.75
13210
960.74
... More
5.5.12
Supplying, fitting & fixing M.S. Grill made of 20x6mm flat as per approved design and drawing aproperly fabricated with joints continuous fitted, welded and finished smooth, hoisting as per building specification and direction of E/I.
501.24
41257
82.31
... More
5.8.41
Providing primer one coat of red lead paint of approved make over steel surface including preparing the surface after cleaning removing dirt, scales, grease and sand papering, including cost of scaffolding etc. all complete as per building specification direction of E/I.
75.46
4359
57.77
... More
5.8.45
Providing 2 coats of Synthetic Enamel Paint of approved shade and make over steel surface grills & railings including cleaning the surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I.
7.46
492
66.04
... More
5.10.33
Providing 250mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I
42.3
61156
1445.77
... More
5.3.8
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth
19.04
6695
351.75
... More
DSR 13.80
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
867.29
110492
127.4
... More
DSR/13.46 Finishing walls with Acrylic Smooth exterior paint of required shade :
13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm
over and including priming coat of exterior primer applied
@ 2.20 kg/10 sqm)
183.64
24077
131.11
... More
5.8.18
Providing two coats of oil bound distemper of approved make & shade over a coat of cement primer over new surface including preparing the plastered surface by rubbing, smooth with pumic stone or fine sand paper, aplying putty wherever required, scaffolding , washing of flores and taxes etc. all complete as per building specification direction of E/I.
581.41
52419
90.16
... More
DSR 12.41.2
Providing & fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS 13592 Type A including jointing with seal ring conforming to IS 5382 leaving 10mm gap for thermal expansion. Single socketed pipes. 110mm dia
18
5545
308.11
... More
DSR 12.42
Providing & fixing on wall face unplasticised- PVC moulded fittings/accessories for unplasticised - Rigid PVC rain water pipes conforming to IS 13592 Type A including jointing with seal ring conforming to IS 5382 leaving 10mm gap for thermal expansion
-
-
-
... More
DSR 12.42.5.2
Bend -110 mm
7
859
122.75
... More
DSR 12.42.6.2
Shoe - 110mm
7
753
107.64
... More
DSR 12.42.1.2
Coupler 110 mm
5
555
111.15
... More
DSR 12.43.2
Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plgs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
14
4243
303.13
... More
DSR 11.41 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete
1 1.41.2 Size of Tile 600x600 mm
17.23
21851
1268.24
... More
DSR 11.39
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4
Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.
11.5
12486
1085.81
... More
DSR 8.31
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
57.9
59935
1035.15
... More
5.10.4
Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.
86.63
3530
40.75
... More
DSR/11.20
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).
11.20.1 Light shade pigment using white cement
97.49
111586
1144.59
... More
Carriage of materials by truck or by any mechenical means loading,unloading & stacking etc. all complete job as per direction of E/I.
-
-
-
... More
Bricks(1k+7p)= 8 km
0.01
5
741.2
... More
Local Sand (3 KM.)
5.6
880
157.24
... More
Coarse sand (20 Km)
76.2
22082
289.8
... More
Stone Chips (12 km)
26.7
9461
354.36
... More
Cement (4 km)
19.7
8589
436
... More
Water Supply and Sanitary work
-
-
-
... More
3.2.1
Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I. 'P' trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32mm alkathene/ P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of vitreous white glazed earthenware footrest to be fixed in floor 15mm C.I. body brass spindle stop cock of weight not less than 50 grms, 15mm P.V.C. connection pipe 450 mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specificatin and direction of E/I. (A) 580 mm long (C) with 10 ltrs. low level P.V.C. Cistern
2
8768
4384.46
... More
DSR 17.7
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass
pillar taps, 32 mm C.P. brass waste of standard pattern, including
painting of fittings and brackets, cutting and making good the walls
wherever require:
17.7.9 White Vitreous China Surgeon type wash basin of size
660x460 mm with single 15 mm C.P. brass pillar taps
with elbow operated levers ISI Marked
3
7201
2400.62
... More
DSR 17.8
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
3
4122
1374.29
... More
DSR 17.70
Providing and fixing PTMT Bottle Trap for Wash basin and sink. 17.70.1 Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms
3
899
299.7
... More
DSR 18.52.1
Providing and fixing C.P. brass Stop Cock (concealed) of standard designand of approved make conforming to IS 8931. 18.52.1 15mm nominal bore
3
1642
547.36
... More
DSR 18.64 Providing and fixing PTMT swivelling shower, 15 mm nominal bore,
weighing not less than 40 gms
2
198
99.11
... More
DSR 17.72
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
3
568
189.36
... More
DSR 17.73
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
17.73.1 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
2
1099
549.76
... More
D.S.R 18.50
Providing and fixing C.P.brass long body bib cock of approved quality conforming to standard and weight not less thain 810gms.
-
-
-
... More
18.50.1 15mm nominal bore
4
2680
670.02
... More
D.S.R. 18.53
Providing and fixing C.P. brass angle valve for , gyser & others points of approved quality conforming to IS 8931. 18.53.1 15mm nominal bore, approved brand C.P. fittings.
3
1406
468.86
... More
DSR 18.65
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
3
272
90.99
... More
D.S.R. 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end )
-
-
-
... More
DSR 18.17.2
32 mm nominal bore.
1
562
562.99
... More
D.S.R. 18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete.
-
-
-
... More
DSR 18.18.2
20mm nominal bore
2
755
377.59
... More
DSR 18.18.3
25mm nominal bore
2
757
378.85
... More
DSR 17.31
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
3
3938
1312.73
... More
DSR 18.58
Providing and fixing PTMT grating of approved quality and colour.
-
-
-
... More
DSR 18.58.2 Rectangular type with openable circular lid
DSR 18.58.2.1
150 mm nominal size square 100 mm diameter of the inner hinged round grating
3
482
160.79
... More
DSR 17.10
Providing and fixing stainless steel A ISI 304(18/8) kitchen sink as per I.S.13983 with C.I. Brackets stainless steel plug 40mm including painting of fittings and brackets cutting and making goods the walls wherever required :
DSR 17.10.1 Kitchen sink with drain board
DSR 17.10.1.2
510x1040 mm bowl depth 225 mm
1
5844
5844.61
... More
DSR 18.74
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.
18.74.2 15 mm nominal bore with 45 cm length.
3
298
99.52
... More
DSR 17.22B
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.
(a) 15 mm nominal dia
2
11332
5666.43
... More
DSR 12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,
(i) Single socketed pipes.
-
-
-
... More
12.41.1 75 mm diameter
15
3046
203.12
... More
12.41.2 110 mm diameter
20
6162
308.11
... More
D.S.R 12.42 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
... More
DSR 12.42.1.1 Coupler 75 mm
2
149
74.86
... More
DSR 12.42.1.2
Coupler 110 mm
2
222
111.15
... More
DSR 12.42.2 Single pushfit Coupler
-
-
-
... More
DSR 12.42.2.1
75 mm
2
152
76.01
... More
DSR 12.42.2.2
110 mm
2
208
104.17
... More
DSR 12.42.3 Single tee with door
-
-
-
... More
DSR 12.42.3.1
75 X 75 X 75 mm
2
268
134.05
... More
DSR 12.42.3.2
110 X 110 X 110 mm
2
382
191.16
... More
DSR 12.42.4
Single tee without door
-
-
-
... More
DSR 12.42.4.1 75 X 75 X 75 mm
2
235
117.81
... More
DSR 12.42.4.2
110 X 110 X 110 mm
2
361
180.71
... More
DSR 12.42.5
Bend 87.5°
-
-
-
... More
DSR 12.42.5.1 75 mm Bend
2
172
86.46
... More
DSR 12.42.5.2
110 MM Bend
2
245
122.75
... More
D.S.R. 12.42.6 SHOE - 110MM
-
-
-
... More
DSR 12.42.6.1 75 MM
2
152
76.01
... More
DSR 12.42.6.2 110 MM Shoe
2
215
107.64
... More
D.S.R.12.43 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
... More
DSR 12.43.1
75 mm
20
6039
301.95
... More
DSR 12.43.2
110 mm
25
7578
303.13
... More
DSR 18.8
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joining of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I.(Approved Brand - ASTRAL/ SUPREME)
-
-
-
... More
Concealed work including cutting chases and making good the wall etc..
-
-
-
... More
DSR 18.8.1.
15mm dia
15
6096
406.4
... More
DSR 18.8.2.
20mm dia
15
6583
438.9
... More
DSR 18.7
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
-
-
-
... More
DSR 18.7.3
25 mm nominal outer dia Pipes
35
11474
327.83
... More
D.S.R. 19.30
Constructing brick masonary chamber for Underground C. I. Inspection Chamber and bend with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. Cover with frame (light duty) 455X610 mm internal dimensions, total weight of cover with frame to be not less than 38 KG. (weight of cover 23 kg. and weight of frame 15 kg) RCC top slab with 1:1.5:3 mix (1 cement:1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 mix (1 cement:5 coarse sand :10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm th. with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:
-
-
-
... More
19.30.1.1 Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
11328
5664.1
... More
Analysed and Approved
Pvc trap including all fittings
2
630
315
... More
D.S.R 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
2000
17960
8.98
... More
INTERNAL & EXTERNAL ELCTRIFICATION WORK
-
-
-
... More
Note:- OF MAKE (1)PVC insuleted copper conductor wire of make:-Havell's/Polycab/Mescab/Anchor /HPL (2)PVC conduit of thiknss 1.5mm/2mm for wiring:-Polycab/ANCHOR/AKG (3) GI modular box of make -: Anchor/ Havells/Legrand/ABB (4)Switches/soket outlet for modular type:- Anchor(roma) / Havells(cabtree) / C&S/ Legrand (5)MCCB,MCB,SFU,CHANGEOVER,RCCB,MCB-DB:Havell's/L&T/Legrand/Schneider/C&S (6)XLPE/PVC aramoured cable:-Havell's/Polycab/V-guard/Finolex/Mescab (7) LED FTTING FIXTURE -: Havells/Bajaj/Crompton/C&S (Model/as per E/I ) (8) CEILING / WALL / EXHAUST FAN -: Havells / Bajaj / Usha (Model/as per E/I) (9)OCTAGONAL POLE/High Mast-: Bajaj/Philips/Surya/Valmont/RR Ispat/Transrail (10) CENTRALISED AIR CONDITIONING-:VOLTAS/MITSHUBISHI/TOSHIBA/DAIKIN (11)ALL ELECTRICAL WIRING WORK SHOULD BE CONCEALED (12)CCTV CAMERA /DVR-:Panasonic/Hik vision/C P Plus/Godrej (13)Monitor Camera -: Dell/Samsung/LG/Asus (14)Silent type D.G Set-:Kohler/Jakson/Sterling/Mahindra
-
-
-
... More
1.3 Point wiring in PVC conduit, with modular type switch:-Wiring for light point/fan point/exhaust fan point/call bell point with 1.5. sq.mm FR PVC Insuleted copper conductor single core cable in recessed PVC conduit, with modular type switch, pheonlic lamineted sheet,suitable size G.I.box etc.
-
-
-
... More
1.3.2
Group B
32
22592
706
... More
1.5
Power plug wiring in PVC conduit (2x4 sq mm) :- Wiring for light/Power plug with 2x4 sq mm FR PVC insuleted copper conductor single core cable in recess PVC conduit along with 1 Nos. 4 sq mm FR PVC insuleted copper conductor single core cable for loop earthing as required.
90
23580
262
... More
1.7
Circuit/submain wiring in PVC conduit:-Wiring for circuit/submain wiring along with earth wire with the following size PVC insuleted copper conductor single core cable in recessed PVC conduit as required
-
-
-
... More
1.7.1
2x1.5 sq mm+1x1.5 sq mm earth wire for street light
45
6615
147
... More
1.7.2
2x2.5 sq mm+1x2.5 sq mm earth wire
95
18620
196
... More
1.7.9
4x4.0 sq mm+2x4.0 sq mm earth wire
70
32200
460
... More
1.7.12
4x16 sq mm+2x6 sq mm earth wire
12
15096
1258
... More
1.24
S/F modular type switch /socket :- Supplying and fixing following modular type switch box/cover including connections but excluding modular plate etc as required
-
-
-
... More
1.24.1
5/6 amps, one way switch
6
402
67
... More
1.24.3
15/16 amps, one way switch
4
408
102
... More
1.24.4
5/6 amps, 3 pin socket outlet
6
528
88
... More
1.27
S/F Modular boxes, base & covre plate:-following size/ modular G.I box along with modular base & cover plate for modular switches in recess etc, as required.
-
-
-
... More
1.27.1
1 or 2 module(78mm x 78mm x 45mm)
4
676
169
... More
1.25
S/F Modular type electronic fan regulator:-Supplying and fixing stepped type fan regulator on the existing modular plate switch box including connectionons but excluding modular plate etc, as required.
5
1465
293
... More
1.32
S/F power plug point with modular type accessories:- Supplying and fixing suitable size G.I.box with modular plate and cover in front on recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular switch conection painting etc, as required.
4
1620
405
... More
1.33
S/F ceiling rose:-
Supplying and fixing 2 pin 5 amp, ceiling rose on the existing junction box/wooden block including connection etc as required.
22
990
45
... More
1.34
S/F Batten holder:-
Supplying and fixing batten/angle holder including connection etc, as required.
5
295
59
... More
1.36
S/F Dingdong Call bell :-
Supplying and fixing dingdong call bell suitable for DC/AC single phase,230 volt, complete as required.
1
148
148
... More
1.48
ITC exhaust fan up to 450 mm, sweep:-
Installation of exhaust fan up to 450 mm. sweep in the exiting opening, including making the hole to suit the size of above fan, making good the damage, connection testing commissioning etc as required.
3
183
61
... More
2.4
S/F MCCB in cubical panel board:-
Providing and fixing following rating and capacity four pole MCCB in existing panel bord,including drilling holes in cubical panel making connections etc as required.
-
-
-
... More
2.4.2
25/100 amps, 16 KA fixed thermal seting
1
3557
3557
... More
2.7
S/F, panel mounting changeover
Providing and fixing following capiacity 4 pole panel mounting chengeover switches in existing cubical panel board,making connection, earthing the body etc as required.
-
-
-
... More
2.7.2
63 amps, 4 pole
1
3761
3761
... More
2.9
S/F T.P.MCB DB:-
Supplying and fixing following way three pole and nutral,sheet,MCB distribution board,415 volt,in recess,complete with tinned copper busbar,earth bar, din bar, detachable gland plate, interconnections, phosphatized and power painted including earthing etc. as required.(But without MCB/RCCB/ISOLATOR)
-
-
-
... More
2.9.5
6 way (4+18),Double door, Horizontal type
2
5014
2507
... More
2.11
S/F 'B' series. S.P.MCB:-
Supplying and fixing 6 amps to 32 amps rating,240 volts, 'B' series miniature circuit breaker suitable for lighting and others loads of following poles in the exiting MCB DB complite with connections. Testing and commisioning etc as required.
-
-
-
... More
2.11.1
6/32 amps,single pole, "B" SERIES
6
1092
182
... More
2.12
S/F 'C' series. S.P.MCB:-
Supplying and fixing 6 amps to 32 amps rating,240 volts, 'C' series miniature circuit breaker suitable for lighting and others loads of following poles in the exiting MCB DB complite with connections. Testing and commisioning etc as required.
-
-
-
... More
2.12.1
6/32 amps,single pole, "C" SERIES
6
1092
182
... More
2.12.4
6/32 amps,SPN
2
1114
557
... More
2.12.8
6/32 amps,TPN
6
5442
907
... More
2.12.10
50/63 amps, TPN
2
2616
1308
... More
M-1493
Supply of Modular type AC starter switch for single phase 230 V /50 Hz of capacity 20/25 amp
3
1169
389.68
... More
2.19
P/F M.V. danger notice plate:-
Providing and fixing M.V danger notice plate of 200mm x150mm made of mild steel, at least 2mm thick, and vitreous enamelled white on both sides, and with inscription in single red coiour on front side as required.
1
164
164
... More
3.6
Copper Earth plate electrode:-
Earthing with copper earth plate 600mmX600mmX3mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. as required.( with salt charcoal or coke)
2
21332
10666
... More
3.7
S/L 8 SWG copper wire ground :-
Supplying and laying 8 SWG copper wire 0.50 metre bellow ground level for conductor earth electrode, including soldring etc. as required.
20
2800
140
... More
5.1
Laying of one number PVC insuleted and PVC sheathed/ XLPE power cable of 11 KV grade of size not exceeding 35 sq.mm. direct in ground including excavetion, sand coushioning, protective covering and refilling the trench etc as required.
60
12420
207
... More
Code no.
Supply of PVC XLPE insuletd PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts,(conforms to IS:7098, part-1)g
-
-
-
... More
M-327
35 sq.mm. 3.5 core
75
29742
396.57
... More
12.37 DSR Supplying and fixing of light class G.I. pipe of 50 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required
2
4451
2225.8
... More
9.1 DSR
Supplying and making end termination with brass commpression gland and aluminium lugs for following size of PVC insuleted and PVC sheathed /XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
... More
9.1.21 DSR 3½ X 35 sq. mm (32mm)
2
640
320.32
... More
M - 775
Providing of 12'' (300 mm) Metal exhaust fan of make bajaj/havells/usha/crompton
3
4051
1350.66
... More
M - 777
Providing of 16'' (400 mm) Wall fan of make bajaj/havells/usha/crompton
2
4483
2241.52
... More
M 856
Supplying and fixing of LED bulb 15/16 W of make bajaj/havells/crompton
5
1149
229.9
... More
M - 869
Providing of Bulkhead fitting with 9/10 watt LED/ CFL of make bajaj/havells/crompton
2
689
344.85
... More
9.1
SITC of following rating LED street lighting luminarie with pressure dia cast housingh and toughned glass cover ,IP 66 Protection , LUMINOUSEFFICARY _110 LM/W with lens in existing pole /pipe for supply voltage 100-270V AC ,50 Hz, luminarie shall be confirm to IS 10322 part -5 /section -3 and shall be complete with all neccssary accessosries as required.
-
-
-
... More
9.1.6
70/72 W LED Street light of make bajaj/havells/crompton/C&S
2
12574
6287
... More
9.3
SITC of following rating recess/ surface mounted LED round /square shape down light luminire with pressure dia cast housing for single phase supply voltage, Luminarie shall be confirmto IS:10322 part - 5/section -2 or IEC : 62722 with all neccessary accessories as required.
-
-
-
... More
9.3.3
15/16 W LED Round Down Light of make bajaj/havells/crompton/C&S
4
3948
987
... More
9.4
S.I.T.C of following size ceiling fan 3 blades confirming to IS:374:2019 including wiring the down rods of standared length (upto 30cm) with 1.5 sq.mm FR PVC insuleted ,copper wire suitable for 230 V 50 Hz, single phase supply etc. complete as required.
-
-
-
... More
9.4.1 1200 mm (48") Ceiling Fan of make bajaj/havells/usha/crompton/polar
5
8740
1748
... More
9.5
SITC of following rating surface mounted LED tube light fitting suitable for 230 V 50 Hz, single phase supply etc .complete as required
-
-
-
... More
9.5.2
20/22 W LED Batten of make bajaj/havells/crompton/C&S
10
6280
628
... More
KARAPAL RESIDENCE
-
-
-
... More
5.8.9
Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/I.
136.63
1720
12.59
... More
5.10.7
Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I
343.23
7365
21.46
... More
5.7.3
Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I
245.25
40662
165.8
... More
5.7.6
Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I
99.26
18269
184.06
... More
5.10.10
Taking down old door and window shutters including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I
16
721
45.12
... More
5.10.11
Taking down chaukhats in doors including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I
6
539
89.88
... More
5.10.12
Taking sown chaukhats in windows including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I
10
1380
138.07
... More
DSR 10.14
Providing and fixing pressed steel door frames conforming to IS: 4351 manufactured from commercial mild steel of 1.60 mm thickness including hings , jamb , lock jamb, bead and if required angle threshold of mild steel angle od section 50x25mm or base ties of 1.60 mm pressed mild steel welded or rigidly togather by mechnical means including M.S pressed butt hiongs 2.5 mm thick with mortar guards , lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre treatment of the surface as directed by Engineer - in-charge. Profile B
41.37
19700
476.21
... More
5.4.34
Supplying, fitting & fixing 30mm thick solid core type decorative single leaf flush door shutters in doors with both side decorative venier with black board core bended with high quality in all formaldehyde synthetic resin of standered with aluminium fittings such as hinges, tower bolts, handle, cleats aldrop, door stopper & sand blocks & taxes all complete as per detail drawing building specification & direction of the E/I.
14.07
28665
2037.34
... More
DSR 13.68
French spirit polishing :
13.68.1 Two or more coats on new works including a coat of wood
36.62
13341
364.32
... More
DSR 22.22 A
Providing and applying fibre reinforced elastomeric liquid waterproofing membrane with resilient acrylic polymers having Sun
Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric
waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The
operation shall be carried out after scrapping and properly cleaning
the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge.
106.6
49005
459.71
... More
DSR/22.14
Grading roof for water proofing treatment with
22.14.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand :
4 graded stone aggregate 20mm nominal size)
7.99
52460
6565.73
... More
DSR 21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
... More
DSR 21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
21.1.2.3 Polyester powder coated aluminium
(minimum thickness of polyester powder
coating 50 micron)
76.8
40343
525.31
... More
DSR 21.3
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
21.3.1 With float glass panes of 4.0 mm thickness
11.9
11432
960.74
... More
5.5.12
Supplying, fitting & fixing M.S. Grill made of 20x6mm flat as per approved design and drawing aproperly fabricated with joints continuous fitted, welded and finished smooth, hoisting as per building specification and direction of E/I.
440.23
36235
82.31
... More
5.8.41
Providing primer one coat of red lead paint of approved make over steel surface including preparing the surface after cleaning removing dirt, scales, grease and sand papering, including cost of scaffolding etc. all complete as per building specification direction of E/I.
23.79
1374
57.77
... More
5.8.45
Providing 2 coats of Synthetic Enamel Paint of approved shade and make over steel surface grills & railings including cleaning the surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I.
23.79
1571
66.04
... More
5.10.33
Providing 250mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I
41.18
59536
1445.77
... More
5.3.8
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth
30.88
10862
351.75
... More
DSR 13.80
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
522.35
66547
127.4
... More
DSR/13.46 Finishing walls with Acrylic Smooth exterior paint of required shade :
13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm
over and including priming coat of exterior primer applied
@ 2.20 kg/10 sqm)
186.15
24406
131.11
... More
5.8.18
Providing two coats of oil bound distemper of approved make & shade over a coat of cement primer over new surface including preparing the plastered surface by rubbing, smooth with pumic stone or fine sand paper, aplying putty wherever required, scaffolding , washing of flores and taxes etc. all complete as per building specification direction of E/I.
336.2
30311
90.16
... More
DSR 12.41.2
Providing & fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS 13592 Type A including jointing with seal ring conforming to IS 5382 leaving 10mm gap for thermal expansion. Single socketed pipes. 110mm dia
18
5545
308.11
... More
DSR 12.42
Providing & fixing on wall face unplasticised- PVC moulded fittings/accessories for unplasticised - Rigid PVC rain water pipes conforming to IS 13592 Type A including jointing with seal ring conforming to IS 5382 leaving 10mm gap for thermal expansion
-
-
-
... More
DSR 12.42.5.2
Bend -110 mm
7
859
122.75
... More
DSR 12.42.6.2
Shoe - 110mm
7
753
107.64
... More
DSR 12.42.1.2
Coupler 110 mm
5
555
111.15
... More
DSR 12.43.2
Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plgs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
14
4243
303.13
... More
DSR 11.41 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete
1 1.41.2 Size of Tile 600x600 mm
17.23
21851
1268.24
... More
DSR 11.39
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4
Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.
8.83
9587
1085.81
... More
DSR 8.31
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
61.15
63299
1035.15
... More
5.10.4
Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.
87.21
3553
40.75
... More
DSR/11.20
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).
11.20.1 Light shade pigment using white cement
59.3
67874
1144.59
... More
Carriage of materials by truck or by any mechenical means loading,unloading & stacking etc. all complete job as per direction of E/I.
-
-
-
... More
Bricks(1k+7p)= 8 km
0.01
5
741.2
... More
Local Sand (3 KM.)
5.6
880
157.24
... More
Coarse sand (20 Km)
79.61
23070
289.8
... More
Stone Chips (12 km)
32.7
11587
354.36
... More
Cement (4 km)
26.78
11676
436
... More
Water Supply & Sanitary
-
-
-
... More
3.2.1
Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I. 'P' trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32mm alkathene/ P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of vitreous white glazed earthenware footrest to be fixed in floor 15mm C.I. body brass spindle stop cock of weight not less than 50 grms, 15mm P.V.C. connection pipe 450 mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specificatin and direction of E/I. (A) 580 mm long (C) with 10 ltrs. low level P.V.C. Cistern
2
8768
4384.46
... More
DSR 17.7
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass
pillar taps, 32 mm C.P. brass waste of standard pattern, including
painting of fittings and brackets, cutting and making good the walls
wherever require:
17.7.9 White Vitreous China Surgeon type wash basin of size
660x460 mm with single 15 mm C.P. brass pillar taps
with elbow operated levers ISI Marked
3
7201
2400.62
... More
DSR 17.8
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
3
4122
1374.29
... More
DSR 17.70
Providing and fixing PTMT Bottle Trap for Wash basin and sink. 17.70.1 Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms
3
899
299.7
... More
DSR 18.52.1
Providing and fixing C.P. brass Stop Cock (concealed) of standard designand of approved make conforming to IS 8931. 18.52.1 15mm nominal bore
3
1642
547.36
... More
DSR 18.64 Providing and fixing PTMT swivelling shower, 15 mm nominal bore,
weighing not less than 40 gms
2
198
99.11
... More
DSR 17.72
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
3
568
189.36
... More
DSR 17.73
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
17.73.1 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
2
1099
549.76
... More
D.S.R 18.50
Providing and fixing C.P.brass long body bib cock of approved quality conforming to standard and weight not less thain 810gms.
-
-
-
... More
18.50.1 15mm nominal bore
4
2680
670.02
... More
D.S.R. 18.53
Providing and fixing C.P. brass angle valve for , gyser & others points of approved quality conforming to IS 8931. 18.53.1 15mm nominal bore, approved brand C.P. fittings.
3
1406
468.86
... More
DSR 18.65
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
3
272
90.99
... More
D.S.R. 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end )
-
-
-
... More
DSR 18.17.2
32 mm nominal bore.
1
562
562.99
... More
D.S.R. 18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete.
-
-
-
... More
DSR 18.18.2
20mm nominal bore
2
755
377.59
... More
DSR 18.18.3
25mm nominal bore
2
757
378.85
... More
DSR 17.31
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
3
3938
1312.73
... More
DSR 18.58
Providing and fixing PTMT grating of approved quality and colour.
-
-
-
... More
DSR 18.58.2 Rectangular type with openable circular lid
DSR 18.58.2.1
150 mm nominal size square 100 mm diameter of the inner hinged round grating
3
482
160.79
... More
DSR 17.10
Providing and fixing stainless steel A ISI 304(18/8) kitchen sink as per I.S.13983 with C.I. Brackets stainless steel plug 40mm including painting of fittings and brackets cutting and making goods the walls wherever required :
DSR 17.10.1 Kitchen sink with drain board
DSR 17.10.1.2
510x1040 mm bowl depth 225 mm
1
5844
5844.61
... More
DSR 18.74
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.
18.74.2 15 mm nominal bore with 45 cm length.
3
298
99.52
... More
DSR 17.22B
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.
(a) 15 mm nominal dia
2
11332
5666.43
... More
DSR 12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,
(i) Single socketed pipes.
-
-
-
... More
12.41.1 75 mm diameter
15
3046
203.12
... More
12.41.2 110 mm diameter
20
6162
308.11
... More
D.S.R 12.42 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
... More
DSR 12.42.1.1 Coupler 75 mm
2
149
74.86
... More
DSR 12.42.1.2
Coupler 110 mm
2
222
111.15
... More
DSR 12.42.2 Single pushfit Coupler
-
-
-
... More
DSR 12.42.2.1
75 mm
2
152
76.01
... More
DSR 12.42.2.2
110 mm
2
208
104.17
... More
DSR 12.42.3 Single tee with door
-
-
-
... More
DSR 12.42.3.1
75 X 75 X 75 mm
2
268
134.05
... More
DSR 12.42.3.2
110 X 110 X 110 mm
2
382
191.16
... More
DSR 12.42.4
Single tee without door
-
-
-
... More
DSR 12.42.4.1 75 X 75 X 75 mm
2
235
117.81
... More
DSR 12.42.4.2
110 X 110 X 110 mm
2
361
180.71
... More
DSR 12.42.5
Bend 87.5°
-
-
-
... More
DSR 12.42.5.1 75 mm Bend
2
172
86.46
... More
DSR 12.42.5.2
110 MM Bend
2
245
122.75
... More
D.S.R. 12.42.6 SHOE - 110MM
-
-
-
... More
DSR 12.42.6.1 75 MM
2
152
76.01
... More
DSR 12.42.6.2 110 MM Shoe
2
215
107.64
... More
D.S.R.12.43 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
... More
DSR 12.43.1
75 mm
20
6039
301.95
... More
DSR 12.43.2
110 mm
25
7578
303.13
... More
DSR 18.8
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joining of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I.(Approved Brand - ASTRAL/ SUPREME)
-
-
-
... More
Concealed work including cutting chases and making good the wall etc..
-
-
-
... More
DSR 18.8.1.
15mm dia
15
6096
406.4
... More
DSR 18.8.2.
20mm dia
15
6583
438.9
... More
DSR 18.7
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
-
-
-
... More
DSR 18.7.3
25 mm nominal outer dia Pipes
35
11474
327.83
... More
D.S.R. 19.30
Constructing brick masonary chamber for Underground C. I. Inspection Chamber and bend with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. Cover with frame (light duty) 455X610 mm internal dimensions, total weight of cover with frame to be not less than 38 KG. (weight of cover 23 kg. and weight of frame 15 kg) RCC top slab with 1:1.5:3 mix (1 cement:1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 mix (1 cement:5 coarse sand :10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm th. with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:
-
-
-
... More
19.30.1.1 Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
4
22656
5664.1
... More
Analysed and Approved
Pvc trap including all fittings
5
1575
315
... More
D.S.R 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
2000
17960
8.98
... More
INTERNAL & EXTERNAL ELCTRIFICATION WORK
-
-
-
... More
Note:- OF MAKE (1)PVC insuleted copper conductor wire of make:-Havell's/Polycab/Mescab/Anchor /HPL (2)PVC conduit of thiknss 1.5mm/2mm for wiring:-Polycab/ANCHOR/AKG (3) GI modular box of make -: Anchor/ Havells/Legrand/ABB (4)Switches/soket outlet for modular type:- Anchor(roma) / Havells(cabtree) / C&S/ Legrand (5)MCCB,MCB,SFU,CHANGEOVER,RCCB,MCB-DB:Havell's/L&T/Legrand/Schneider/C&S (6)XLPE/PVC aramoured cable:-Havell's/Polycab/V-guard/Finolex/Mescab (7) LED FTTING FIXTURE -: Havells/Bajaj/Crompton/C&S (Model/as per E/I ) (8) CEILING / WALL / EXHAUST FAN -: Havells / Bajaj / Usha (Model/as per E/I) (9)OCTAGONAL POLE/High Mast-: Bajaj/Philips/Surya/Valmont/RR Ispat/Transrail (10) CENTRALISED AIR CONDITIONING-:VOLTAS/MITSHUBISHI/TOSHIBA/DAIKIN (11)ALL ELECTRICAL WIRING WORK SHOULD BE CONCEALED (12)CCTV CAMERA /DVR-:Panasonic/Hik vision/C P Plus/Godrej (13)Monitor Camera -: Dell/Samsung/LG/Asus (14)Silent type D.G Set-:Kohler/Jakson/Sterling/Mahindra
-
-
-
... More
1.3 Point wiring in PVC conduit, with modular type switch:-Wiring for light point/fan point/exhaust fan point/call bell point with 1.5. sq.mm FR PVC Insuleted copper conductor single core cable in recessed PVC conduit, with modular type switch, pheonlic lamineted sheet,suitable size G.I.box etc.
-
-
-
... More
1.3.1
Group A
21
12747
607
... More
1.5
Power plug wiring in PVC conduit (2x4 sq mm) :- Wiring for light/Power plug with 2x4 sq mm FR PVC insuleted copper conductor single core cable in recess PVC conduit along with 1 Nos. 4 sq mm FR PVC insuleted copper conductor single core cable for loop earthing as required.
60
15720
262
... More
1.7
Circuit/submain wiring in PVC conduit:-Wiring for circuit/submain wiring along with earth wire with the following size PVC insuleted copper conductor single core cable in recessed PVC conduit as required
-
-
-
... More
1.7.1
2x1.5 sq mm+1x1.5 sq mm earth wire for street light
35
5145
147
... More
1.7.2
2x2.5 sq mm+1x2.5 sq mm earth wire
75
14700
196
... More
1.7.9
4x4.0 sq mm+2x4.0 sq mm earth wire
55
25300
460
... More
1.7.12
4x16 sq mm+2x6 sq mm earth wire
7
8806
1258
... More
1.24
S/F modular type switch /socket :- Supplying and fixing following modular type switch box/cover including connections but excluding modular plate etc as required
-
-
-
... More
1.24.1
5/6 amps, one way switch
5
335
67
... More
1.24.3
15/16 amps, one way switch
4
408
102
... More
1.24.4
5/6 amps, 3 pin socket outlet
5
440
88
... More
1.27
S/F Modular boxes, base & covre plate:-following size/ modular G.I box along with modular base & cover plate for modular switches in recess etc, as required.
-
-
-
... More
1.27.1
1 or 2 module(78mm x 78mm x 45mm)
4
676
169
... More
1.25
S/F Modular type electronic fan regulator:-Supplying and fixing stepped type fan regulator on the existing modular plate switch box including connectionons but excluding modular plate etc, as required.
4
1172
293
... More
1.32
S/F power plug point with modular type accessories:- Supplying and fixing suitable size G.I.box with modular plate and cover in front on recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular switch conection painting etc, as required.
4
1620
405
... More
1.33
S/F ceiling rose:-
Supplying and fixing 2 pin 5 amp, ceiling rose on the existing junction box/wooden block including connection etc as required.
18
810
45
... More
1.34
S/F Batten holder:-
Supplying and fixing batten/angle holder including connection etc, as required.
5
295
59
... More
1.36
S/F Dingdong Call bell :-
Supplying and fixing dingdong call bell suitable for DC/AC single phase,230 volt, complete as required.
1
148
148
... More
1.48
ITC exhaust fan up to 450 mm, sweep:-
Installation of exhaust fan up to 450 mm. sweep in the exiting opening, including making the hole to suit the size of above fan, making good the damage, connection testing commissioning etc as required.
2
122
61
... More
2.4
S/F MCCB in cubical panel board:-
Providing and fixing following rating and capacity four pole MCCB in existing panel bord,including drilling holes in cubical panel making connections etc as required.
-
-
-
... More
2.4.2
25/100 amps, 16 KA fixed thermal seting
1
3557
3557
... More
2.7
S/F, panel mounting changeover
Providing and fixing following capiacity 4 pole panel mounting chengeover switches in existing cubical panel board,making connection, earthing the body etc as required.
-
-
-
... More
2.7.2
63 amps, 4 pole
1
3761
3761
... More
2.9
S/F T.P.MCB DB:-
Supplying and fixing following way three pole and nutral,sheet,MCB distribution board,415 volt,in recess,complete with tinned copper busbar,earth bar, din bar, detachable gland plate, interconnections, phosphatized and power painted including earthing etc. as required.(But without MCB/RCCB/ISOLATOR)
-
-
-
... More
2.9.5
6 way (4+18),Double door, Horizontal type
1
2507
2507
... More
2.11
S/F 'B' series. S.P.MCB:-
Supplying and fixing 6 amps to 32 amps rating,240 volts, 'B' series miniature circuit breaker suitable for lighting and others loads of following poles in the exiting MCB DB complite with connections. Testing and commisioning etc as required.
-
-
-
... More
2.11.1
6/32 amps,single pole, "B" SERIES
3
546
182
... More
2.12
S/F 'C' series. S.P.MCB:-
Supplying and fixing 6 amps to 32 amps rating,240 volts, 'C' series miniature circuit breaker suitable for lighting and others loads of following poles in the exiting MCB DB complite with connections. Testing and commisioning etc as required.
-
-
-
... More
2.12.1
6/32 amps,single pole, "C" SERIES
3
546
182
... More
2.12.4
6/32 amps,SPN
1
557
557
... More
2.12.8
6/32 amps,TPN
3
2721
907
... More
2.12.10
50/63 amps, TPN
1
1308
1308
... More
2.19
P/F M.V. danger notice plate:-
Providing and fixing M.V danger notice plate of 200mm x150mm made of mild steel, at least 2mm thick, and vitreous enamelled white on both sides, and with inscription in single red coiour on front side as required.
1
164
164
... More
3.6
Copper Earth plate electrode:-
Earthing with copper earth plate 600mmX600mmX3mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. as required.( with salt charcoal or coke)
2
21332
10666
... More
3.7
S/L 8 SWG copper wire ground :-
Supplying and laying 8 SWG copper wire 0.50 metre bellow ground level for conductor earth electrode, including soldring etc. as required.
20
2800
140
... More
5.1
Laying of one number PVC insuleted and PVC sheathed/ XLPE power cable of 11 KV grade of size not exceeding 35 sq.mm. direct in ground including excavetion, sand coushioning, protective covering and refilling the trench etc as required.
45
9315
207
... More
Code no.
Supply of PVC XLPE insuletd PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts,(conforms to IS:7098, part-1)g
-
-
-
... More
M-740
16 sq.mm. 4 core
60
15241
254.03
... More
12.37 DSR Supplying and fixing of light class G.I. pipe of 50 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required
2
4451
2225.8
... More
9.1 DSR
Supplying and making end termination with brass commpression gland and aluminium lugs for following size of PVC insuleted and PVC sheathed /XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
... More
9.1.33 DSR 4 X 16 sq. mm (28mm)
2
536
268.24
... More
M - 775
Providing of 12'' (300 mm) Metal exhaust fan of make bajaj/havells/usha/crompton
2
2701
1350.66
... More
M 856
Supplying and fixing of LED bulb 15/16 W of make bajaj/havells/crompton
4
919
229.9
... More
M - 869
Providing of Bulkhead fitting with 9/10 watt LED/ CFL of make bajaj/havells/crompton
1
344
344.85
... More
9.1
SITC of following rating LED street lighting luminarie with pressure dia cast housingh and toughned glass cover ,IP 66 Protection , LUMINOUSEFFICARY _110 LM/W with lens in existing pole /pipe for supply voltage 100-270V AC ,50 Hz, luminarie shall be confirm to IS 10322 part -5 /section -3 and shall be complete with all neccssary accessosries as required.
-
-
-
... More
9.1.6
70/72 W LED Street light of make bajaj/havells/crompton/C&S
1
6287
6287
... More
9.3
SITC of following rating recess/ surface mounted LED round /square shape down light luminire with pressure dia cast housing for single phase supply voltage, Luminarie shall be confirmto IS:10322 part - 5/section -2 or IEC : 62722 with all neccessary accessories as required.
-
-
-
... More
9.3.3
15/16 W LED Round Down Light of make bajaj/havells/crompton/C&S
2
1974
987
... More
9.4
S.I.T.C of following size ceiling fan 3 blades confirming to IS:374:2019 including wiring the down rods of standared length (upto 30cm) with 1.5 sq.mm FR PVC insuleted ,copper wire suitable for 230 V 50 Hz, single phase supply etc. complete as required.
-
-
-
... More
9.4.1 1200 mm (48") Ceiling Fan of make bajaj/havells/usha/crompton/polar
4
6992
1748
... More
9.5
SITC of following rating surface mounted LED tube light fitting suitable for 230 V 50 Hz, single phase supply etc .complete as required
-
-
-
... More
9.5.2
20/22 W LED Batten of make bajaj/havells/crompton/C&S
8
5024
628
... More
LIPIK RESIDENCE
-
-
-
... More
5.8.9
Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/I.
136.63
1720
12.59
... More
5.10.7
Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I
343.23
7365
21.46
... More
5.7.3
Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I
245.25
40662
165.8
... More
5.7.6
Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I
99.26
18269
184.06
... More
5.10.10
Taking down old door and window shutters including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I
16
721
45.12
... More
5.10.11
Taking down chaukhats in doors including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I
6
539
89.88
... More
5.10.12
Taking sown chaukhats in windows including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I
10
1380
138.07
... More
DSR 10.14
Providing and fixing pressed steel door frames conforming to IS: 4351 manufactured from commercial mild steel of 1.60 mm thickness including hings , jamb , lock jamb, bead and if required angle threshold of mild steel angle od section 50x25mm or base ties of 1.60 mm pressed mild steel welded or rigidly togather by mechnical means including M.S pressed butt hiongs 2.5 mm thick with mortar guards , lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre treatment of the surface as directed by Engineer - in-charge. Profile B
41.37
19700
476.21
... More
5.4.34
Supplying, fitting & fixing 30mm thick solid core type decorative single leaf flush door shutters in doors with both side decorative venier with black board core bended with high quality in all formaldehyde synthetic resin of standered with aluminium fittings such as hinges, tower bolts, handle, cleats aldrop, door stopper & sand blocks & taxes all complete as per detail drawing building specification & direction of the E/I.
14.07
28665
2037.34
... More
DSR 13.68
French spirit polishing :
13.68.1 Two or more coats on new works including a coat of wood
36.62
13341
364.32
... More
DSR 22.22 A
Providing and applying fibre reinforced elastomeric liquid waterproofing membrane with resilient acrylic polymers having Sun
Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric
waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The
operation shall be carried out after scrapping and properly cleaning
the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge.
106.6
49005
459.71
... More
DSR/22.14
Grading roof for water proofing treatment with
22.14.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand :
4 graded stone aggregate 20mm nominal size)
7.99
52460
6565.73
... More
DSR 21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
... More
DSR 21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
21.1.2.3 Polyester powder coated aluminium
(minimum thickness of polyester powder
coating 50 micron)
76.8
40343
525.31
... More
DSR 21.3
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
21.3.1 With float glass panes of 4.0 mm thickness
11.9
11432
960.74
... More
5.5.12
Supplying, fitting & fixing M.S. Grill made of 20x6mm flat as per approved design and drawing aproperly fabricated with joints continuous fitted, welded and finished smooth, hoisting as per building specification and direction of E/I.
440.23
36235
82.31
... More
5.8.41
Providing primer one coat of red lead paint of approved make over steel surface including preparing the surface after cleaning removing dirt, scales, grease and sand papering, including cost of scaffolding etc. all complete as per building specification direction of E/I.
23.79
1374
57.77
... More
5.8.45
Providing 2 coats of Synthetic Enamel Paint of approved shade and make over steel surface grills & railings including cleaning the surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I.
23.79
1571
66.04
... More
5.10.33
Providing 250mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I
41.18
59536
1445.77
... More
5.3.8
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth
30.88
10862
351.75
... More
DSR 13.80
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
522.35
66547
127.4
... More
DSR/13.46 Finishing walls with Acrylic Smooth exterior paint of required shade :
13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm
over and including priming coat of exterior primer applied
@ 2.20 kg/10 sqm)
186.15
24406
131.11
... More
5.8.18
Providing two coats of oil bound distemper of approved make & shade over a coat of cement primer over new surface including preparing the plastered surface by rubbing, smooth with pumic stone or fine sand paper, aplying putty wherever required, scaffolding , washing of flores and taxes etc. all complete as per building specification direction of E/I.
336.2
30311
90.16
... More
DSR 12.41.2
Providing & fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS 13592 Type A including jointing with seal ring conforming to IS 5382 leaving 10mm gap for thermal expansion. Single socketed pipes. 110mm dia
18
5545
308.11
... More
DSR 12.42
Providing & fixing on wall face unplasticised- PVC moulded fittings/accessories for unplasticised - Rigid PVC rain water pipes conforming to IS 13592 Type A including jointing with seal ring conforming to IS 5382 leaving 10mm gap for thermal expansion
-
-
-
... More
DSR 12.42.5.2
Bend -110 mm
7
859
122.75
... More
DSR 12.42.6.2
Shoe - 110mm
7
753
107.64
... More
DSR 12.42.1.2
Coupler 110 mm
5
555
111.15
... More
DSR 12.43.2
Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plgs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
14
4243
303.13
... More
DSR 11.41 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete
1 1.41.2 Size of Tile 600x600 mm
17.23
21851
1268.24
... More
DSR 11.39
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4
Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.
8.83
9587
1085.81
... More
DSR 8.31
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
61.15
63299
1035.15
... More
5.10.4
Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.
87.21
3553
40.75
... More
DSR/11.20
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).
11.20.1 Light shade pigment using white cement
54.26
62105
1144.59
... More
Carriage of materials by truck or by any mechenical means loading,unloading & stacking etc. all complete job as per direction of E/I.
-
-
-
... More
Bricks(1k+7p)= 8 km
0.01
5
741.2
... More
Local Sand (3 KM.)
5.6
880
157.24
... More
Coarse sand (20 Km)
79.61
23070
289.8
... More
Stone Chips (12 km)
32.7
11587
354.36
... More
Cement (4 km)
26.78
11676
436
... More
Water Supply & Sanitary
-
-
-
... More
3.2.1
Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I. 'P' trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32mm alkathene/ P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of vitreous white glazed earthenware footrest to be fixed in floor 15mm C.I. body brass spindle stop cock of weight not less than 50 grms, 15mm P.V.C. connection pipe 450 mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specificatin and direction of E/I. (A) 580 mm long (C) with 10 ltrs. low level P.V.C. Cistern
2
8768
4384.46
... More
DSR 17.7
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass
pillar taps, 32 mm C.P. brass waste of standard pattern, including
painting of fittings and brackets, cutting and making good the walls
wherever require:
17.7.9 White Vitreous China Surgeon type wash basin of size
660x460 mm with single 15 mm C.P. brass pillar taps
with elbow operated levers ISI Marked
3
7201
2400.62
... More
DSR 17.8
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
3
4122
1374.29
... More
DSR 17.70
Providing and fixing PTMT Bottle Trap for Wash basin and sink. 17.70.1 Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms
3
899
299.7
... More
DSR 18.52.1
Providing and fixing C.P. brass Stop Cock (concealed) of standard designand of approved make conforming to IS 8931. 18.52.1 15mm nominal bore
3
1642
547.36
... More
DSR 18.64 Providing and fixing PTMT swivelling shower, 15 mm nominal bore,
weighing not less than 40 gms
2
198
99.11
... More
DSR 17.72
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
3
568
189.36
... More
DSR 17.73
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
17.73.1 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
2
1099
549.76
... More
D.S.R 18.50
Providing and fixing C.P.brass long body bib cock of approved quality conforming to standard and weight not less thain 810gms.
-
-
-
... More
18.50.1 15mm nominal bore
4
2680
670.02
... More
D.S.R. 18.53
Providing and fixing C.P. brass angle valve for , gyser & others points of approved quality conforming to IS 8931. 18.53.1 15mm nominal bore, approved brand C.P. fittings.
3
1406
468.86
... More
DSR 18.65
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
3
272
90.99
... More
D.S.R. 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end )
-
-
-
... More
DSR 18.17.2
32 mm nominal bore.
1
562
562.99
... More
D.S.R. 18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete.
-
-
-
... More
DSR 18.18.2
20mm nominal bore
2
755
377.59
... More
DSR 18.18.3
25mm nominal bore
2
757
378.85
... More
DSR 17.31
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
3
3938
1312.73
... More
DSR 18.58
Providing and fixing PTMT grating of approved quality and colour.
-
-
-
... More
DSR 18.58.2 Rectangular type with openable circular lid
DSR 18.58.2.1
150 mm nominal size square 100 mm diameter of the inner hinged round grating
3
482
160.79
... More
DSR 17.10
Providing and fixing stainless steel A ISI 304(18/8) kitchen sink as per I.S.13983 with C.I. Brackets stainless steel plug 40mm including painting of fittings and brackets cutting and making goods the walls wherever required :
DSR 17.10.1 Kitchen sink with drain board
DSR 17.10.1.2
510x1040 mm bowl depth 225 mm
1
5844
5844.61
... More
DSR 18.74
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.
18.74.2 15 mm nominal bore with 45 cm length.
3
298
99.52
... More
DSR 17.22B
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.
(a) 15 mm nominal dia
2
11332
5666.43
... More
DSR 12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,
(i) Single socketed pipes.
-
-
-
... More
12.41.1 75 mm diameter
15
3046
203.12
... More
12.41.2 110 mm diameter
20
6162
308.11
... More
D.S.R 12.42 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
... More
DSR 12.42.1.1 Coupler 75 mm
2
149
74.86
... More
DSR 12.42.1.2
Coupler 110 mm
2
222
111.15
... More
DSR 12.42.2 Single pushfit Coupler
-
-
-
... More
DSR 12.42.2.1
75 mm
2
152
76.01
... More
DSR 12.42.2.2
110 mm
2
208
104.17
... More
DSR 12.42.3 Single tee with door
-
-
-
... More
DSR 12.42.3.1
75 X 75 X 75 mm
2
268
134.05
... More
DSR 12.42.3.2
110 X 110 X 110 mm
2
382
191.16
... More
DSR 12.42.4
Single tee without door
-
-
-
... More
DSR 12.42.4.1 75 X 75 X 75 mm
2
235
117.81
... More
DSR 12.42.4.2
110 X 110 X 110 mm
2
361
180.71
... More
DSR 12.42.5
Bend 87.5°
-
-
-
... More
DSR 12.42.5.1 75 mm Bend
2
172
86.46
... More
DSR 12.42.5.2
110 MM Bend
2
245
122.75
... More
D.S.R. 12.42.6 SHOE - 110MM
-
-
-
... More
DSR 12.42.6.1 75 MM
2
152
76.01
... More
DSR 12.42.6.2 110 MM Shoe
2
215
107.64
... More
D.S.R.12.43 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
... More
DSR 12.43.1
75 mm
20
6039
301.95
... More
DSR 12.43.2
110 mm
25
7578
303.13
... More
DSR 18.8
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joining of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I.(Approved Brand - ASTRAL/ SUPREME)
-
-
-
... More
Concealed work including cutting chases and making good the wall etc..
-
-
-
... More
DSR 18.8.1.
15mm dia
15
6096
406.4
... More
DSR 18.8.2.
20mm dia
15
6583
438.9
... More
DSR 18.7
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
-
-
-
... More
DSR 18.7.3
25 mm nominal outer dia Pipes
35
11474
327.83
... More
D.S.R. 19.30
Constructing brick masonary chamber for Underground C. I. Inspection Chamber and bend with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. Cover with frame (light duty) 455X610 mm internal dimensions, total weight of cover with frame to be not less than 38 KG. (weight of cover 23 kg. and weight of frame 15 kg) RCC top slab with 1:1.5:3 mix (1 cement:1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 mix (1 cement:5 coarse sand :10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm th. with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:
-
-
-
... More
19.30.1.1 Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
4
22656
5664.1
... More
Analysed and Approved
Pvc trap including all fittings
5
1575
315
... More
D.S.R 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
2000
17960
8.98
... More
INTERNAL & EXTERNAL ELCTRIFICATION WORK
-
-
-
... More
Note:- OF MAKE (1)PVC insuleted copper conductor wire of make:-Havell's/Polycab/Mescab/Anchor /HPL (2)PVC conduit of thiknss 1.5mm/2mm for wiring:-Polycab/ANCHOR/AKG (3) GI modular box of make -: Anchor/ Havells/Legrand/ABB (4)Switches/soket outlet for modular type:- Anchor(roma) / Havells(cabtree) / C&S/ Legrand (5)MCCB,MCB,SFU,CHANGEOVER,RCCB,MCB-DB:Havell's/L&T/Legrand/Schneider/C&S (6)XLPE/PVC aramoured cable:-Havell's/Polycab/V-guard/Finolex/Mescab (7) LED FTTING FIXTURE -: Havells/Bajaj/Crompton/C&S (Model/as per E/I ) (8) CEILING / WALL / EXHAUST FAN -: Havells / Bajaj / Usha (Model/as per E/I) (9)OCTAGONAL POLE/High Mast-: Bajaj/Philips/Surya/Valmont/RR Ispat/Transrail (10) CENTRALISED AIR CONDITIONING-:VOLTAS/MITSHUBISHI/TOSHIBA/DAIKIN (11)ALL ELECTRICAL WIRING WORK SHOULD BE CONCEALED (12)CCTV CAMERA /DVR-:Panasonic/Hik vision/C P Plus/Godrej (13)Monitor Camera -: Dell/Samsung/LG/Asus (14)Silent type D.G Set-:Kohler/Jakson/Sterling/Mahindra
-
-
-
... More
1.3 Point wiring in PVC conduit, with modular type switch:-Wiring for light point/fan point/exhaust fan point/call bell point with 1.5. sq.mm FR PVC Insuleted copper conductor single core cable in recessed PVC conduit, with modular type switch, pheonlic lamineted sheet,suitable size G.I.box etc.
-
-
-
... More
1.3.1
Group A
21
12747
607
... More
1.5
Power plug wiring in PVC conduit (2x4 sq mm) :- Wiring for light/Power plug with 2x4 sq mm FR PVC insuleted copper conductor single core cable in recess PVC conduit along with 1 Nos. 4 sq mm FR PVC insuleted copper conductor single core cable for loop earthing as required.
60
15720
262
... More
1.7
Circuit/submain wiring in PVC conduit:-Wiring for circuit/submain wiring along with earth wire with the following size PVC insuleted copper conductor single core cable in recessed PVC conduit as required
-
-
-
... More
1.7.1
2x1.5 sq mm+1x1.5 sq mm earth wire for street light
35
5145
147
... More
1.7.2
2x2.5 sq mm+1x2.5 sq mm earth wire
75
14700
196
... More
1.7.9
4x4.0 sq mm+2x4.0 sq mm earth wire
55
25300
460
... More
1.7.12
4x16 sq mm+2x6 sq mm earth wire
7
8806
1258
... More
1.24
S/F modular type switch /socket :- Supplying and fixing following modular type switch box/cover including connections but excluding modular plate etc as required
-
-
-
... More
1.24.1
5/6 amps, one way switch
5
335
67
... More
1.24.3
15/16 amps, one way switch
4
408
102
... More
1.24.4
5/6 amps, 3 pin socket outlet
5
440
88
... More
1.27
S/F Modular boxes, base & covre plate:-following size/ modular G.I box along with modular base & cover plate for modular switches in recess etc, as required.
-
-
-
... More
1.27.1
1 or 2 module(78mm x 78mm x 45mm)
4
676
169
... More
1.25
S/F Modular type electronic fan regulator:-Supplying and fixing stepped type fan regulator on the existing modular plate switch box including connectionons but excluding modular plate etc, as required.
4
1172
293
... More
1.32
S/F power plug point with modular type accessories:- Supplying and fixing suitable size G.I.box with modular plate and cover in front on recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular switch conection painting etc, as required.
4
1620
405
... More
1.33
S/F ceiling rose:-
Supplying and fixing 2 pin 5 amp, ceiling rose on the existing junction box/wooden block including connection etc as required.
18
810
45
... More
1.34
S/F Batten holder:-
Supplying and fixing batten/angle holder including connection etc, as required.
5
295
59
... More
1.36
S/F Dingdong Call bell :-
Supplying and fixing dingdong call bell suitable for DC/AC single phase,230 volt, complete as required.
1
148
148
... More
1.48
ITC exhaust fan up to 450 mm, sweep:-
Installation of exhaust fan up to 450 mm. sweep in the exiting opening, including making the hole to suit the size of above fan, making good the damage, connection testing commissioning etc as required.
2
122
61
... More
2.4
S/F MCCB in cubical panel board:-
Providing and fixing following rating and capacity four pole MCCB in existing panel bord,including drilling holes in cubical panel making connections etc as required.
-
-
-
... More
2.4.2
25/100 amps, 16 KA fixed thermal seting
1
3557
3557
... More
2.7
S/F, panel mounting changeover
Providing and fixing following capiacity 4 pole panel mounting chengeover switches in existing cubical panel board,making connection, earthing the body etc as required.
-
-
-
... More
2.7.2
63 amps, 4 pole
1
3761
3761
... More
2.9
S/F T.P.MCB DB:-
Supplying and fixing following way three pole and nutral,sheet,MCB distribution board,415 volt,in recess,complete with tinned copper busbar,earth bar, din bar, detachable gland plate, interconnections, phosphatized and power painted including earthing etc. as required.(But without MCB/RCCB/ISOLATOR)
-
-
-
... More
2.9.5
6 way (4+18),Double door, Horizontal type
1
2507
2507
... More
2.11
S/F 'B' series. S.P.MCB:-
Supplying and fixing 6 amps to 32 amps rating,240 volts, 'B' series miniature circuit breaker suitable for lighting and others loads of following poles in the exiting MCB DB complite with connections. Testing and commisioning etc as required.
-
-
-
... More
2.11.1
6/32 amps,single pole, "B" SERIES
3
546
182
... More
2.12
S/F 'C' series. S.P.MCB:-
Supplying and fixing 6 amps to 32 amps rating,240 volts, 'C' series miniature circuit breaker suitable for lighting and others loads of following poles in the exiting MCB DB complite with connections. Testing and commisioning etc as required.
-
-
-
... More
2.12.1
6/32 amps,single pole, "C" SERIES
3
546
182
... More
2.12.4
6/32 amps,SPN
1
557
557
... More
2.12.8
6/32 amps,TPN
3
2721
907
... More
2.12.10
50/63 amps, TPN
1
1308
1308
... More
2.19
P/F M.V. danger notice plate:-
Providing and fixing M.V danger notice plate of 200mm x150mm made of mild steel, at least 2mm thick, and vitreous enamelled white on both sides, and with inscription in single red coiour on front side as required.
1
164
164
... More
3.6
Copper Earth plate electrode:-
Earthing with copper earth plate 600mmX600mmX3mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. as required.( with salt charcoal or coke)
2
21332
10666
... More
3.7
S/L 8 SWG copper wire ground :-
Supplying and laying 8 SWG copper wire 0.50 metre bellow ground level for conductor earth electrode, including soldring etc. as required.
20
2800
140
... More
5.1
Laying of one number PVC insuleted and PVC sheathed/ XLPE power cable of 11 KV grade of size not exceeding 35 sq.mm. direct in ground including excavetion, sand coushioning, protective covering and refilling the trench etc as required.
45
9315
207
... More
Code no.
Supply of PVC XLPE insuletd PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts,(conforms to IS:7098, part-1)g
-
-
-
... More
M-740
16 sq.mm. 4 core
60
15241
254.03
... More
12.37 DSR Supplying and fixing of light class G.I. pipe of 50 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required
2
4451
2225.8
... More
9.1 DSR
Supplying and making end termination with brass commpression gland and aluminium lugs for following size of PVC insuleted and PVC sheathed /XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
... More
9.1.33 DSR 4 X 16 sq. mm (28mm)
2
536
268.24
... More
M - 775
Providing of 12'' (300 mm) Metal exhaust fan of make bajaj/havells/usha/crompton
2
2701
1350.66
... More
M 856
Supplying and fixing of LED bulb 15/16 W of make bajaj/havells/crompton
4
919
229.9
... More
M - 869
Providing of Bulkhead fitting with 9/10 watt LED/ CFL of make bajaj/havells/crompton
1
344
344.85
... More
9.1
SITC of following rating LED street lighting luminarie with pressure dia cast housingh and toughned glass cover ,IP 66 Protection , LUMINOUSEFFICARY _110 LM/W with lens in existing pole /pipe for supply voltage 100-270V AC ,50 Hz, luminarie shall be confirm to IS 10322 part -5 /section -3 and shall be complete with all neccssary accessosries as required.
-
-
-
... More
9.1.6
70/72 W LED Street light of make bajaj/havells/crompton/C&S
1
6287
6287
... More
9.3
SITC of following rating recess/ surface mounted LED round /square shape down light luminire with pressure dia cast housing for single phase supply voltage, Luminarie shall be confirmto IS:10322 part - 5/section -2 or IEC : 62722 with all neccessary accessories as required.
-
-
-
... More
9.3.3
15/16 W LED Round Down Light of make bajaj/havells/crompton/C&S
2
1974
987
... More
9.4
S.I.T.C of following size ceiling fan 3 blades confirming to IS:374:2019 including wiring the down rods of standared length (upto 30cm) with 1.5 sq.mm FR PVC insuleted ,copper wire suitable for 230 V 50 Hz, single phase supply etc. complete as required.
-
-
-
... More
9.4.1 1200 mm (48") Ceiling Fan of make bajaj/havells/usha/crompton/polar
4
6992
1748
... More
9.5
SITC of following rating surface mounted LED tube light fitting suitable for 230 V 50 Hz, single phase supply etc .complete as required
-
-
-
... More
9.5.2
20/22 W LED Batten of make bajaj/havells/crompton/C&S
8
5024
628
... More
Add 18% GST
1
621215
621215.91
... More
Add 1% Lebour Cess
1
40724
40724.15
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements