National Metallurgical Laboratory Tender
Search from across the categories, cities, and authorities to find the latest Jharkhand tenders. Every Jharkhand tender is curated from credible sources of government websites (eProcurement Jharkhand portal) and newspapers, thus ensuring the credibility of the information presented to you. For more information on Jharkhand tender bidder registration, the login process and more read the FAQs section on this page.
National Metallurgical Laboratory - NML Tender
Civil And Construction
Water Storage And Supply
Eprocure
Opening Date19 Jun 2024
Closing Date1 Jul 2024
Tender Amount₹ 49,98,273
Costs
EMD
₹ 99,965Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_CSIR_197349_1Bid Award Id
ViewTender No
NML/ENG./WSM/eNIT/06(01)/24-25Tender Authority
National Metallurgical Laboratory ViewPurchaser Address
-Website
http://https://www.csir.res.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
SOP NORMS FOR SAFETY IN WORKS AT CSIR-NML
BOQ Items
Demolishing Brick work in cement mortar manually/ by mechanical means including stackng of serviceable material and disposal of unserviceable material with in 50 metre lead as per direction of EIC. In Cement Mortar.
5
-
-
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground with in 50 metre lead.
120
-
-
Dismantling GI pipes (External work) including excavation and refilling trenches after taking out the pipes , manually /by mechanical means including stacking of pipes within 50 metre lead as per direction of Engineer In Charge. 15 mm to upto 40mm nominal bore
12
-
-
Dismantling GI pipes (External work) including excavation and refilling trenches after taking out the pipes , manually /by mechanical means including stacking of pipes within 50 metre lead as per direction of Engineer In Charge. Above 40mm nominal bore
6
-
-
Demolishing tiles work in floors and roofs laid in cement mortar including stacking material within 50 metre lead.thickness of tiles 25 mm to 40 mm
18
-
-
Dismantling steel work in single section including dismembering and stacking within 50 metreleadin:Channels,angles,tees and flats .
50
-
-
Dismantling CI pipe Including excavation and refilling trenches after taking out the pipes , manually / by mechanical means breaking lead caulked joints , melting of lead and making in to blocks including stacking of pipes & lead at site with in 50 metre lead as per direction of engineer in charge : up to 150 mm diametre:
12
-
-
Dismantling of Aluminium Partitions,Gypsum board, Flase ceilling with staging and stagging the materials as directed complete .
30
-
-
Dismantling roofing including ridges, hips, valleys and gutters etc.,and stacking the material within 50 metres lead of:G.S. Sheet
30
-
-
Supply Chemical emulsion in sealed containsers including delivery as specified.Chlorpyriphos/Lindane emiulsifiable cocentrate of 20 % .
30
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-treatment (excluding the cost of chemical emulsion): Along external wall below concrete or masonry apron using chemical emulsion @ 2.25 per linear metre including drilling and plugging holes etc. With Chlorpyripos/ Lindance E.C. 20% with 1% concentration.
120
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-treatment (excluding the cost of chemical emulsion): Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor: With Chlorpyripos/ Lindance E.C. 20% with 1% concentration.
90
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-treatment (excluding the cost of chemical emulsion): Treatment at points of contract of wood work by chemical emulsion Chlorpyripos/ Lindance (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centra to centre and sealing the same.
60
-
-
Supplying and filling plinth with sand under floor including watering, ramming, consolidating and dressing,complete.
3
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains(not exceding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottom,lift up to1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within alead of 50 m.All kinds of soil.
18
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, side of foundations etc. in layer not exceeding 20 ems in depth: consolidating each deposited layer by ramming and watering, lead upto 50m and lift uoto 1.5m.
12
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work uoto plinth level. 1:2:4 (1cement:2coarse sand: 4graded stone aggregate 20mm nominal size.)
2.5
-
-
Providing and laying in position specified grade of reinforced cement concrete , excluding the cost of centering , shuttering , finishing and reinforcement- all work up to plingth level: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
2
-
-
RCC work in walls, beam suspended floors, roofs having slop up to 15 degree landing , balconies, shelves, chajja, lintels, bands, plain window sill ,stair case and spiral stair cases above plingth level up to floor five level excluding cost of centering,shuttering,finishing and reinforcement. 1:1.5:3 (1cement:1.5coarse sand: 3graded stone aggregate 20mm nominal size.)
3
-
-
Providing and fixing double action hydraulic floor spring of approved brand and manufacture (conforming to IS:6315), having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg, for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate, etc. complete as per the direction of Engineer-in- Charge. With stainless steel cover plate minimum 1.25mm thickness.
6
-
-
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
5
-
-
Providing and fixing 6mm dia G.I. level adjusting hangers of rods (upto 1200mm length) fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3 mm size 60mm long and expandable dash fastners of 12.5mm dia. and 50mm long complete as per direction of Engineer-in- charge.
30
-
-
P/F powdered coated aluminium work(minimum thickness of powder coating 50 micron) consisting of tee/angle sections of approved make conforming to IS : 733 in frames of false celing including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with rawl plug @ 450mm centre to centre and fixing the frame work to G.I level adjusting hangers 6mm dia with necessary cadmiumplated machine screws all complete as per approved architectural drawing and direction of the engineer-in-charge.( Level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately).
30
-
-
Providing and fixing aluminium hanging floor door stopper, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper
24
-
-
Steel reinforcement for RCC work including straightening, cutting bending, placing in position and binding all complete above plinth level.Thermo- Mechanically Treated Bars Fe -500 D or more
75
-
-
Centring and shuttering including strutting,propping,etc. and removal of form for: Foundation,footings,bases of columns,etc.
15
-
-
Centring and shuttering including strutting,propping,etc. and removal of form for: Suspended floor ,roof ,landing , shelves, beams, columns balconies,etc.
15
-
-
Centring and shuttering including strutting,propping,etc. and removal of form for: Weather Shade, chajjas,corbels,etc. including edges
10
-
-
Brick work with common brunt clay F.P.S (Non Modular ) bricks of class designation 7.5 in foundation and plingth: in Cement mortar 1:6 (1cement : 6 coarse sand)
5
-
-
Brick work with common brunt clays F.P.S (non modular) brick of class designation7.5 in super structure above plingth level upto floor V level in all shapes and sizein cement mortar 1:6 ( 1Cement : 6 Coarse Sand).
3
-
-
Half brick masonary with common burnt cly F.P.S (non Modular ) brick of class designation75 in super structure above plingth to floor V level. Cement mortar 1:4(1 cemt : 4 coarse sand)
10
-
-
Structural steelwork single section, fixed with or without connecting plate , including cutting ,hoisting , fixing in position and applying a priming coat of approved steel primer all complete.
50
-
-
Structural steelwork riveted,bolted or welded in builtup section, trusses and framework including cutting hoisting and fixing in position and applying priming coat of approved steel primer all complete.
50
-
-
P/F MS grill of required pattern in frames of windows etc. with M.S flats ,square or round bars etc.including priming coat with approved steel primer all complete.Fixed to openning /wooden frame with rawl plugs screws etc.
60
-
-
Providing & fixing 18 mm thick gang saw cut mirror polished Granite machine cut for kitchen plate form vanity counters,window sill, facias and similer location of requered size of approved shade , colour and texture laid over 20 mm thick base cement morter 1:4 with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels----Granite of any any colour and shade. Area of Slab over 0.50 sqm
6
-
-
Extra for fixing marble/granite stone over and above corresponding basic item, in facia and drops of width upto 150mm with epoxy resin based adhesive includina clean etc. complete
10
-
-
P/F 1st quality ceramic glazed wall tiles conforming to IS : 15622 of (thickness to be specified by manufacturer) of approved make in all colours, shadess except burgundy, bootle green, black of any size as approved by Engineer in change, in skirting, risers of steps and dados over 12mm thick bed of Cement morter 1:3 (1cement: 3 Coarse sand) and jointing with gray cement slurry @ 3.3 kg per sqm incl. pointing with white cament mixed with pigment of matching shade complete.
24
-
-
Cement concrete flooring 1 :2:4 finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 1 :2:4 with floating coat of neat cement punning. 40mm thick with 20 mm nominal size stone aggregate.
30
-
-
Providing laying Vitrified floor tiles in different size (thickness to be specified by manufacturer) with water absorption's less then 0.08% and conforming to IS 15622 of approved make in all colours and sheds, laid on 20mm thick bed of Cement morter 1:4 (1cement:4 Coarse sand) incl.grouting the joints with white cament mathchingpigments etc. complete.Size of Tile 600x600 mm.
30
-
-
Providing laying Vitrified tiles in different size ( thickness to be specified by manufacturer) with water absorption's less then 0.08% and conforming to IS 15622 of approved make in all colours and sheds, in skirting ,riser of steps ,over 12 mm thick bed of cement mortar 1:3 ( 1cement:3 coarse sand), including incl.grouting the joints with white cement matching,pigments etc. complete.Size of tiles 600x600mm.
24
-
-
Providing and fixing IS: 12817 marked stainless steel butt hinges stainless steel screw etc. complete: size 100x58x1.9mm
12
-
-
Providing and fixing ISI marked 1S:1341 oxidised M.S. pressed butt hinges with necessary screws etc. complete. (Copper oxidised as per IS 1378) : 100x58x1.90 mm
6
-
-
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes,channels,plates,etc. including welding,grinding,buffing,polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts,etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of EIC, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts,fasteners,etc.)
12
-
-
12mm cement plaster of mix. 1:4 (1cement : 4 coarse sand)
120
-
-
15mm cement plaster on rough side. 1:4 (1cement : 4 coarse sand)
90
-
-
6 mm cement plaster for ceiling of mix 1:3. (1cement : 3 fine sand)
30
-
-
Neat cement punning.
40
-
-
Finishing walls with waterproofing cement paint of required shade :old work (one or more coat applied @ 2.20kg/10sqm.
500
-
-
Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth .
500
-
-
Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer's specification.One or more coats on old work
2000
-
-
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats
3000
-
-
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. Water thinnable cement primer
3000
-
-
Painting with aluminium paint of approed brand and manufecture to give an even shade: Two or more coats on new work .
30
-
-
Applying priming coat with ready mix pink or grey primer of approved brand and manufecture on wood ( hard and soft wood) on wood work.
50
-
-
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work
750
-
-
Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade :Two or more coats on new work
250
-
-
White washing with lime to give an even shade (old work) two or more coats.
5000
-
-
Finishing walls with Acrylic Smooth exterior paint of required shade . Old Work (Two or more coat applied @ 1.67 ltr/10sqm) on existing cement paint surface.
1000
-
-
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth inculding necessary repairs to scratches etc. complete
5000
-
-
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
5000
-
-
Providing and fixing on wall face unplasticised Rigid PVC rain water conforming to IS-13592 Type A, including jointing with seal ring conforming to IS: 5382, 75 mm dia
12
-
-
Providing and fixing on wall face unplasticised Rigid PVC rain water conforming to IS-13592 Type A, including jointing with seal ring conforming to IS: 5382, 110mm dia
12
-
-
Providing and fixing PVC moulded fittings/accessories for unplasticised Rigid PVC pipes rain water pipes conforming to IS:13592 type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion . Bend 87.5 degree size 75 mm bend.
6
-
-
Providing and fixing PVC moulded fittings/accessories for unplasticised Rigid PVC pipes rain water pipes conforming to IS:13592 type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion . Bend 87.5 degreesize 110 mm bend.
6
-
-
Providing and fixing PVC moulded fittings/accessories for unplasticised Rigid PVC pipes rain water pipes conforming to IS:13592 type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion . Shoe (Plain) size 75 mm.
6
-
-
Providing and fixing PVC moulded fittings/accessories for unplasticised Rigid PVC pipes rain water pipes conforming to IS:13592 type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion .Shoe (Plain) size 110 mm .
6
-
-
Providing & fixing anodised aluminium work for doors, windows, ventilators, and partion with extruded built up standard tubular sections/ Zsection and other section of approved make conforming to IS 733 and IS 1285,fixed with dash fasteners of required dia and size , including necessary filling up the gaps at junction ,i.e at top , bottom and sides with required EPDM rubber /neropene gasket etc. Aluminium section shall be smooth ,rust free,straight,mitred and jointed mechanically whereever requred including cleat angle, aluminum snap beading for glazing/panelling, C.P brass /stainless steel screw, all complete as per architectural drawing and the direction of Engineer in Charge(Glazing and panelling to be paid for separately):For fixed Portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
50
-
-
Providing & fixing anodised aluminium work for doors, windows, ventilators, and partion with extruded built up standard tubular sections/ Zsection and other section of approved make conforming to IS 733 and IS 1285,fixed with dash fasteners of required dia and size , including necessary filling up the gaps at junction ,i.e at top , bottom and sides with required EPDM rubber /neropene gasket etc. Aluminium section shall be smooth ,rust free,straight,mitred and jointed mechanically whereever requred including cleat angle, aluminum snap beading for glazing/panelling, C.P brass /stainless steel screw, all complete as per architectural drawing and the direction of Engineer in Charge(Glazing and panelling to be paid for separately):For shutter of doors,window & ventilators including providing and fixing hinges /pivot and making provision for fixing of fitting wherever required including the cost of EPDM rubber /neropane gasket required (Fittings shall be paid for separatly ) Anodised Aluminium(anodised transparent or dyed to required shade according to IS :1868, Minimum anodic coating of grade AC 15)
50
-
-
Providing & fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S gusset plates at the junctions and corners , all necessary fitting complete including applying a priming coat of approved steel primer.Using M.S angle 40x 40x6 mm for diagonal braces.
5
-
-
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.
20
-
-
Grading roof for water proofing treatment with cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) with waterproofing material.
3
-
-
Providing & laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement: 2 fine sand) including testing of joints,etc. complete.150 mm dia R.C.C pipe
12
-
-
Providing and fixing white vitreous china water closet approved make. Orissa pattern WC pan 580 x 440mm
3
-
-
P/F GI union in GI pipe including cutting and threading the pipe and making long screws etc. complete (New Work)15mm NB
5
-
-
P/F GI union in GI pipe including cutting and threading the pipe and making long screws etc. complete (New Work)20mm NB
3
-
-
P/F GI union in GI pipe including cutting and threading the pipe and making long screws etc. complete (New Work)25mm NB
3
-
-
P/F GI union in GI pipe including cutting and threading the pipe and making long screws etc. complete (New Work)40mm NB
2
-
-
P/F GI union in GI pipe including cutting and threading the pipe and making long screws etc. complete (New Work)50mm NB
6
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the wall etc.15 mm dia NB
12
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the wall etc.20 mm dia NB
6
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the wall etc.25mm dia NB
6
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the wall etc.40mm dia NB
6
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the wall etc.50mm dia NB
12
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c making good the walls etc. Concealed pipe, including painting with anti corrosive bitumastic paint,cutting chases and making good the wall:15 mm dia NB
24
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c making good the walls etc. Concealed pipe, including painting with anti corrosive bitumastic paint,cutting chases and making good the wall:20 mm dia NB
18
-
-
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.50 mm dia NB
12
-
-
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.80 mm dia NB
6
-
-
Making connection of GI distribution branch with GI mains of following sizes by providing and fixing TEE/elbow/bend, including cutting and threading the pipe etc. complete.25 to 40mm dia
3
-
-
Making connection of GI distribution branch with GI mains of following sizes by providing and fixing TEE/elbow/bend, including cutting and threading the pipe etc. complete.50 to 80mm dia
2
-
-
P/F C.P brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms 15mm nominal bore
6
-
-
P/F C.P brass stop cock (concealed) of standrad design and of approved make conforming to IS 8931 15mm nominal bore
9
-
-
Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Enginineer-in-charge, beeyound 50 m initial lead for all leads including all lifts involved.
220
-
-
Providing and laying four course water proofing treatments with bitumen felt over roofs consisting of first and third course of blown bitumen 85/25 or 90/15 conforming to IS :702 applied hot @1.45 kg per square metre of area for each course ,second course of roofing felt type 3 grade -I (hessian based shelf finished bitumen felt)and fourth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per square metre , including preparation of surface but excluding grading complete with : Bitumen felt ((hessian base) type 3 grade I conforming to IS : 1322
100
-
-
Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
9
-
-
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931-15mm nominal bore
6
-
-
Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :75 mm dia pipe
12
-
-
Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :110 mm dia pipe
12
-
-
Providing and fixing brass bib cock of approved quality :15 nominal bor
6
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
2000
-
-
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin- charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side
10
-
-
Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns poxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
10
-
-
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Ridges plain (500 - 600mm)
10
-
-
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and rection of Engineer-in-charge.
10
-
-
Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape,size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.
1
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
3
-
-
Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :Size 600x450x200 mm
2
-
-
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures omplete.10 litre capacity - White
5
-
-
Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :White solid plastic seat with lid
5
-
-
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe32 mm dia
18
-
-
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe40 mm dia
12
-
-
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
6
-
-
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.15 mm nominal bore with 45 cm length
12
-
-
Providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology.15 mm nominal bore
1
-
-
Providing and fixing toilet paper holder :C.P. brass
5
-
-
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
12
-
-
French spirit polishing Two or more coats on new works including a coat of wood filler
30
-
-
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Sal wood
0.3
-
-
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).
25
-
-
Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-ChargeBars upto 12 mm diameter
20
-
-
Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-ChargeBars above 12 mm diameter
20
-
-
Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes, weighing not less than 60 gms.
18
-
-
Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).
10
-
-
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings,specification & direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)
30
-
-
Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of leaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)
54000
-
-
Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:-(i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water.(iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc.as per direction of Engineer-in-Charge.
1200
-
-
Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.
15
-
-
Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : Decorative veneer facings of approved manufacture
10
-
-
Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately)
15
-
-
Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes, shelves, racks, almirah, cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-incharge.
20
-
-
Supply of 600 x 120 x 5mm glass shelf with edges rounded off supported on CP frame with C.P. brass brackets and guard rail complete of approved quality and design etc.
5
-
-
Supply of C.P Bibcock as per specification conforming to IS:8931 of approved quality :size 15mm NB
18
-
-
Supply Of 4'' C.P grating of approved quality.
6
-
-
Supply of C.P. brass towel rail complete with brackets and necessary screws of approved quality etc. 600mm long towel rail with total length of 645mm, width 78mm, weighing not less than 190 gms.
6
-
-
Supply of C.P. brass waste coupling (32mm to 40mm) for wash basin/ kit. Sink of approved quality and colour.Waste coupling 38mm of 83mm length and 77mm breadth, weighing not less than 45 gms.
5
-
-
Supply of brass gate valve (Zoloto Make).15mm NB
5
-
-
Supply of brass stop cock (Zoloto Make).15mm NB
5
-
-
Supply of brass gate valve (Zoloto Make).25mm NB
3
-
-
Supply of brass gate valve (Zoloto Make).40mm NB
2
-
-
Supply of brass gate valve (Zoloto Make).50mm NB
2
-
-
Supply of C.P Two way bib cock 15 mm dia of approved quality.
3
-
-
Supply of Handfaucet of approved quality -15 mm inlet
10
-
-
Supply of C.P. brass Bottle trap including all fittings & fixtures for wash basin, Sink and urinal of approved quality and colour.Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 263 gms.
5
-
-
Supply of Steel Sliding Bolt with necessary screw of appreved quality and design. Size 250 x10 mm
12
-
-
Supply of M.S Peg stay for steel window with necessary fittings and nut bolts- 300 mm length.
15
-
-
Supply of M.S handle for steel window with necessary fitings and nut bolts- size 125 mm length.
18
-
-
P/F chicken mesh on the masonary or RCC work as per the direction. The chicken mesh should be fixed with nails/screws to the wall or RCC.
20
-
-
Supply of white cement based putty of approved brand .
10
-
-
Replacing and fixing a pair of M S Angle Bracket. Size 50x50x6 including removing the existing system and refixing the same as per actual.
6
-
-
P/Fixing 110 mm dia PVC P- Trap of approved quality.
3
-
-
Supply of roller in Aluminiun Cupboard Shutter of approved quality.
12
-
-
Supply of lock in Aluminiun Cupboard Shutter of approved quality.
6
-
-
Providing and fixing 15mm dia. C.P. nipple of 50mm length .
6
-
-
Supply of PVC long bend for PVC Low Down Cistern with all fittings complete.
6
-
-
Supply of Steel handle 150 mm length required colour or shade with necessary screw etc. complete.
12
-
-
Supply of magnet with necessary screw etc. complete.
20
-
-
Providing,laying and fixing 50mm dia PVC pipe for waste connection of wash basin,toilet,etc.complete as directed by EIC.
12
-
-
Supply Of Nylone Washer For 15 mm Bib Cock & Piller Cock.
200
-
-
Supply Of Cistern Internal Fitting of PVC Low Level Flushing Cistern of approved quality.
6
-
-
Supply of 15 mm Brass spindle For CP brass Bib Cock & Conceal Stop Cock/Piller Cock of approved brand.
48
-
-
Repairing /restoring the existing damaged steel door by fabrication/welding/fixing the required materials such as MS sheet, flat, angle fittings etc. (to be paid separately) including dismantling and re fixing as directed by engineer-in-charge.
10
-
-
Supply of 1 mm thick aluminium sheet for door shutter etc.
10
-
-
Supply of 19 mm thick block board (century make) for cup board shutter including complete as directed.
20
-
-
Supply of bitumen, grade 85/25 or 90/15 of approved brand.
50
-
-
Supply of IS : 12817 marked Stainless Steel Butt Hinges(heavy weight) with necessary SS screws,etc complete. 125 x64x2.50 mm
6
-
-
Supply of glass panes of approved quality . Float Glass panes of nominal thickness 4mm thickness(weight not less than 10kg/sqm.
12
-
-
Supply of Stainless steel tower bolts,with necessary screws etc. Size 200x10mm
12
-
-
Supply of Stainless steel tower bolts, with necessary screws etc. Size 150x10mm
12
-
-
Supply of Stainless steel handle of approved quality and design with necessary screw etc. complete. Size-200mm.
12
-
-
Supply of Stainless steel handle of approved quality and design with necessary screw etc. Size-150mm.
12
-
-
Supply of stain less steel waste coupling (100 mm to 125 mm) for kitchen Sink of approved quality and colour.
3
-
-
Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.
2
-
-
Dismantling of water closet pan ( European type/Indian type) including disposal of material within 50 metres as per direction of EIC from site .
2
-
-
Dismantling PVC or CI Drainage /Sanitary /Rainwater pipe From wall surface including stacking of pipes & lead at site with in 50 metre lead as per direction of engineer in charge : up to 150 mm diametre:
12
-
-
Daily operation of 13 nos Pumps and filter units in NML Main Campus and Magnesium Pilot Plant daily including 01 pump operator(skilled) and 01 helper(unskilled) for each shift in NML Main Campus and 01 pump operator(skilled) for general shift in Mg. Pilot Plant ( total 02 shifts/as per requirements in one day in CSIR-NML main campus and 01 shifts in one day in Mg. Pilot Plant ) i.e. total 05 mandays in a day for both areas for daily operation of pumps ( 07 days in a week) for water supply as directed, daily back washing of filters, supplying and filling all dozing materials, disinfactant as per requirement of the plant, including replacement of gland packing, washers and lubricating etc as and when required.Note:The contractor shall be responsible for uninterrupted quality water supply in both locations and the manpower engaged may be required to perform duties as per requirement of NML ( The contractor give regularly EPF & ESI to the manpower engaged). Note:- GOI clause of Minimum labour wages amended time to time should be met by the contractor along with the EPF & ESI. Proofs of monthlly payment ( Mode Online) and challans of EPF & ESI should be submitted to department for verification monthlly basis. Please note that EPF and ESI contribution on the part of employer contribution, paid by the contractor shall not be reimbursed separatly and quoted rate should include the same.
12
-
-
Supply of M Seal (100 gm pack) for leakage and joint reapairing works in water supply and sanitary line.
50
-
-
Supply of teflon tape for joint reapiring in water supply line.
30
-
-
Providing and fixing Vinyl Self Adhesive Window Films for Glass Privacy Frosted Glass Film with all respect complete .
3
-
-
Providing and fixing alumimuim composit panel as per required size and shape with sealing compound and screw with all respect completet.
5
-
-
Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture .
30
-
-
Providing and Fixing Roller blind including required fittings with all respect complete of approved brand .
30
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements