Military Engineer Services Tender

M&L for LED street lights 60 Watt, aerodynamically designed for all weather conditions with excellent thermal management, made up of pressure die cast housing with toughened glass and high power LEDs with secondary optics and IP66 protection of including connecting in existing circuit with flexible aluminium conductor of size 2 core 2.5 sqmm of 2 mtr long complete all as specified and directed.

M&L for JETA ALBA Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 flood light, 60W suitable for high mass lighting including connecting in existing circuit with flexible aluminium conductor of size 2 core 2.5 sqmm of required at site including taking down existing flood light complete all as specified and directed.

S&F for New generation, IP 65 LED post-top lantern lights of 15 Watt, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source including testing complete all as specified and as directed.

S&F in repair 40 mm dia bore galvanize iron pipe light grade, bent to shape of length 1.50 mtr fixed with flat iron clamp of size 50 mm x 6 mm nuts and bolts of 12 mm dia 100 mm long including washer duly painted with two coat of synthetic enamel paint over a coat or red oxide primer on exposed surface of mild steel surface including preparation of surface including and fixing on pole /wall complete all as specified and directed

Supply and laying or fixing or passing through pipe, XLPE insulated, armoured heavy duty electric cable with aluminium conductor,1100 volts grade, cross-sectional area 4.0 sq. mm two core nominal cross section in stranded conductor including testing and taking down of existing cable complete all as specified and directed.

Supply and laying or fixing or passing through pipe, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm two core nominal cross section in stranded conductor including testing and taking down of existing cable complete all as specified and directed.

Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.5 metre in depth for cable trenches and getting out in soft / loose soil complete all as specified and as directed by the Engineer-in-Charge.

Returning, filling in trenches including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft / loose soil complete all as specified and as directed by the Engineer-in-Charge.

Removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all as specified and as directed by the Engineer-in-Charge.

M&L for Sub class "B" bricks laid dry width wise across the line of cable in trenches as cable protection complete all as specified.

Supply and spreading clean, dry, fine river sand for under ground electric cable in two layers (8cm thick before laying of cable & 15cm thick after laying cable to a total of 23cm) including gentle punning the sand upto 18cm (total thickness) and consolidated around cable for protection of UG cable complete all as specified and directed. NOTE:- For measurement purpose punned thickness shall be considered as per clause 19.75 of SSR Part-I.

Supply and laying in replacement of GI pipe 50 mm dia light grade with all necessary fittings for cable protection on pole complete all as specified and as directed.

M&L for painting to existing steel tubular LT poles, 9m long including cross arms, channels, angle iron support, bracings, clamps etc. with one coat of aluminum paint superior quality of approved make on surfaces exposed to view and making 30cm wide strips (total 5 Nos) with yellow and black paint alternately on external surface above PCC benching including preparation of old painted surfaces by scraping etc complete and writing pole numbers. of 2 inches bold letters with black paint after painting, complete all as specified & directed.

S&F in repair cubical type cable junction box of size 195 mm x 135 mm x 90 mm fabricated /made out of 2 mm thick CRCA steel sheet junction box for street light pole mounted suitable for mounting on round pole & suitable arrangement for fixing of junction box such as bracket,clamp,nut & bolt etc., complete including one single pole MCB 20 Amp breaking capacity 10 KA ,"C" series complete all as specified and directed.

S&F in repair PVC insulated unsheathed cable of size 2.5 Sqmm 2 core for replacement of existing worn out/burnt cable on street light/security light by spiral hanging of wire for connectons from junction box to street light complete all as specified and directed.

S & F digital time swtiches with night sensor type with programming using capative segments with 24 hours timing setting AC 230 volt ,AC contractor(relay) , 40amps including four module weather proof cabinate IP-65 protection complete all as specified and directed as approved by GE.

Supply, installation, testing and commissioning of 30W semi integrated solar street lights (solar LED fixture with inbuilt battery and MPPT charge controller and seprate solar panel) made up of aluminum extrusion housing (battery charge controller and LED module should be integrated inside luminaries) along with minimum 100Wp monocrystalline panel fixed on the top of pole separately, maintenance free 12.8V-24Ah liFePo4 battery along with BMS (BIS certification required) with minimum cycle life of 2000 cycles MPPT charge controller with efficiency less than 90%. luminaries should have an intelligent pre-programmed dimming profile suitable to provide 2 days backup. Luminaries should have IP-65 for all critical components,IK07 and have lumen output of greater than 4800 lumens/watt) as LM79 from NBL accredited Lab the LED chip used should be of Osram, Lumileds, and should be with lenses for effective light distribution. Solar Panel, MPPT charge controller and luminaries should be manufactured on India only the solar lighting company must have in house NABL accredited lab to justify luminaries system efficacy. Luminaries must have Green & Red indicator lights for showing charging of battery and low battery voltage respectively. Light fixture must also have protection like over charged protection ,Deep discharge protection over voltage protection. The solar lighting companies must toll free service network to provide immedite after sales services networks available in different districts of the state approved including taking down/replacement of existing solar street light complete all as specified and directed as approved by GE comprising followings items :- (a) Solar Panel (b) Battery12 volt(c) LED Solar light

S & F Iin repair LED driver 75 watt ,single phase ,240 volt for LED street lights fittings complete all as specified and directed as approved by GE.

S & F Iin repair LED driver 45 watt ,single phase ,240 volt for LED street lights fittings complete all as specified and directed as approved by GE.

S & F Iin repair LED driver 25 watt ,single phase ,240 volt for LED street lights fittings complete all as specified and directed as approved by GE.

M & L for repairing LT feeder box /panel and their doors ,inner compartments etc., by denting /welding where as when required and cleaning removing old paint by paint remover /scrappers for any number of coats or any width or girth and applunig two coat of synthetic enamel paint by spray painting machine (inside & out side) of panels( second coat apply shalll be as directed by Engineer-in Charge)of approved colour /shade complete all as specified and directed as approved by GE.