MECON Limited Tender

Search from across the categories, cities, and authorities to find the latest Jharkhand tenders. Every Jharkhand tender is curated from credible sources of government websites (eProcurement Jharkhand portal) and newspapers, thus ensuring the credibility of the information presented to you. For more information on Jharkhand tender bidder registration, the login process and more read the FAQs section on this page.

MECON Limited - MECON Tender

Works
Real Estate Service
Eprocure
Opening Date21 Jan 2025
Closing Soon10 Feb 2025
Tender AmountRefer Documents 
Notes
Download

Costs

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
1 : 3 (1 cement : 3 fine sand)

5

247

-

... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

300

128

-

... More
Providing and Applying acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

-

-

-

... More
Two coats.

400

113

-

... More
Providing and Applying synthetic enamel paint of approved brand and manufacture to give an even shade :

-

-

-

... More
Two or more coats on new work

25

186

-

... More
Providing and Applying priming coats with primer of approved brand and manufacture, having low VOC((Volatile Organic Compound) content.

-

-

-

... More
(a) With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams / litre

25

58

-

... More
c) With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre.

400

60

-

... More
Applying priming coat:

-

-

-

... More
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works

25

55

-

... More
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

400

20

-

... More
FLOORING

-

-

-

... More
Providing and laying Homogeneous Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in floor,skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints.

-

-

-

... More
Size of Tile 800x800 mm

600

1838

-

... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

-

-

-

... More
Polished granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

2

3695

-

... More
Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.

600

2

-

... More
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

10

60

-

... More
WOOD AND PVC WORK

-

-

-

... More
Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

-

-

-

... More
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

15

2864

-

... More
Providing and fixing cupboard shutter with with 19 mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2 mm thick PVC edge banding tape with hot glue by edge blending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge. (Payment of providing and fixing auto closing hinges shall be paid serparetely)

100

2333

-

... More
Providing and fixing teak wood lipping of size 25x3 mm.

50

60

-

... More
Providing & Fixing decorative high pressure laminated sheet of plain /wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.

-

-

-

... More
1.5 mm thick

200

862

-

... More
1.0 mm thick

200

739

-

... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

-

-

-

... More
Sal wood

1

96082

-

... More
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :

-

-

-

... More
100X58X1.90 mm

100

88

-

... More
75x47x1.80 mm

100

66

-

... More
Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to required colour or shade with nuts and screws etc. complete.

-

-

-

... More
300x16 mm

20

250

-

... More
250x16 mm

10

214

-

... More
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete.

-

-

-

... More
300 x 10 mm

25

107

-

... More
250 x 10 mm

25

94

-

... More
150 x 10 mm

15

68

-

... More
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :

-

-

-

... More
250x10 mm

20

364

-

... More
Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge.

-

-

-

... More
200 mm

25

153

-

... More
Providing and fixing bright finished brass handles with screws etc. complete:

-

-

-

... More
100 mm

25

193

-

... More
Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc., complete

-

-

-

... More
a) single rubber stopper

25

32

-

... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer ( having brand logo with ISI, IS :3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 m to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete

20

810

-

... More
Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured):

-

-

-

... More
Rectangular or square

5

164

-

... More
Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.

-

-

-

... More
Triple strip vertical type

100

43

-

... More
Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete.

-

-

-

... More
Size 40 mm

100

263

-

... More
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

20

704

-

... More
Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws.

100

61

-

... More
Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic tape) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Enginner-in-charge.

25

224

-

... More
Provinding and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per direction of Engineer-in charge.

50

729

-

... More
Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked, including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete.

100

495

-

... More
Providing and fixing chromium plated brass curtain rod having wall thickness of 1,25 mm with 2 chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc. all complete 25 mm dia rod.

75

433

-

... More
Providing and fixing partitioning upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll from G.I. sheet with zinc coating of 120 gms/sqm (both side inclusive), consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to

-

-

-

... More
wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing comound, jointing tape, angle beads at corners (25mm x 25 mm x 0.5mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete.

-

-

-

... More
75 mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum plaster board conforming to IS: 2095: (part I): 2011 (Board with BIS cerfication marks)

50

1499

-

... More
Providing and fixing 12 mm thick frameless toughened glass partition of approved brand and manufacture, including providing and fixing top & bottom SS patch type fixing arrangement and making necessary holes etc. required for fixing glass, all complete as per direction of Engineer-in-charge

10

4378

-

... More
Taking Out and Refixing wooden moulded knobs of drawers fitted and fixed complete.

100

14

-

... More
French polishing to wood work including preparing surface (ordinary gloss)

-

-

-

... More
(a) On new wood work

100

385

-

... More
(b) On old French polished surface including complete removal of the old polish.

300

443

-

... More
Melamine polishing on wood work (one or more coat).

50

983

-

... More
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:

-

-

-

... More
Float glass panes of nominal thickness 4 mm (weight not less

25

899

-

... More
Float glass panes of nominal thickness 5 mm (weight not less

25

1167

-

... More
Providing and fixing stainless steel handle in glass door with necessary screws etc. complete. 25 mm dia and 400 mm length.

6

2821

-

... More
Providing and pasting frosted type PVC glass film over glass shutter and partitions of approved brand. The film shall have inscribed or CNC cut customised company's branding theme and logo as directed by the Engineer in charge

25

725

-

... More
Providing and fixing black out-roller blind curtain of approved fabric, design and make, all complete with roller,chord, string, clutch and other accessories as required. Curtain shall be of 100% polyester having minimum thicknesse of 0.5 mm.

100

1751

-

... More
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

50

217

-

... More
Providing and fixing plywood 4mm thick one side decorative veneer conforming to IS : 1328 ( type-1) for plain lining / cladding with necessary screws including priming coat on unexposed surface with decorative veneer facings of approved manufacturer.

100

1604

-

... More
Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

25

353

-

... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

5

302

-

... More
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer- in-charge.

150

46

-

... More
ALUMINIUM & GLAZING WORKS

-

-

-

... More
Providing and fixing Aluminium work for doors, windows, ventilators and partitions with extruded built-up standard tubular sections/appropriate Z sections and othe sections of approved make conforming to IS:733 nad IS:1285, fixing with dash fasteners of reqd. dia and size, including necessary filling up the gaps at junctions, i.e. at top ,bottom and sides with reqd. EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rustfree straight mitred and jointed mechanically wherever reqd. including cleat angle.Aluminium snap beading for glazing/paneling, C.P. brass/stainless steel screws , all complete as per architectural drgs. and the directions of Engineer in charge.( glazing , paneling and dash fastener to be paid separately)

-

-

-

... More
For Fixed Portion

-

-

-

... More
Anodised aluminium (anodised transperant or dyed to reqd. shade according to IS:1868, Minimum anodic coating of grade AC 15)

50

408

-

... More
Powder Coated Aluminium (minimum thickness of powder coating 50 micron)

50

437

-

... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

-

-

-

... More
Anodised aluminium (anodised transparent or dyed to required shade according to IS:1868,Minimum anodic coating of grade AC 15)

50

493

-

... More
Powder Coated Aluminium (minimum thickness of powder coating 50 micron)

50

523

-

... More
Providing and fixing glazing in Aluminium door,window,ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer in charge.

-

-

-

... More
With float glass panes of 4.0 mm thickness (wt. not less than 10 kg/sqm

25

970

-

... More
With float glass panes of 5 mm thickness (wt. not less than 12.50 kg/sqm

25

1241

-

... More
With float glass panes of 8 mm thickness (wt. not less than 20 kg/sqm

15

1389

-

... More
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

10

4391

-

... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge

-

-

-

... More
With stainless steel cover plate minimum 1.25 mm thickness

10

2328

-

... More
ROOFING

-

-

-

... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with

-

-

-

... More
tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long Gwire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25

-

-

-

... More
mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board , all as per manufacturer's specification and also including the cost of maiking openings for light fittings, grills diffusers, cut-outs made with frame of perimeter channels suitably fixed all complete as per drawings, specification and direction of the Engineer in charge but excluding the cost of painting with:

-

-

-

... More
12.5 mm thick tapered edge gypsum moisture resistant board.

250

1260

-

... More
Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter

-

-

-

... More
fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plasticrawl plug at 450 mm centre to centre & 40 mm long dry wall S.S.screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.

-

-

-

... More
With 16 mm thick beveled tegular mineral fibre false ceiling tile ( NRC 0.55 to 0.6 )

400

1924

-

... More
ELECTRICAL

-

-

-

... More
Wiring for light point/ fan point/ exhaust fan point (Primary point) with 1.5 sq.mm FRLS PVC insulated copper conductor single core wire (for Phase & neutral) in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

109

1372

-

... More
Wiring for group controlled (looped) light point/ fan point/ exhaust fan point (without independent switch) with 1.5 sq.mm FRLS PVC insulated copper conductor single core wire (for Phase & neutral) in surface / recessed medium class PVC conduit and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required (Secondary point).

71

782

-

... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in existing surface/ recessed medium class PVC conduit/ HR casing caping etc as required

-

-

-

... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

473

159

-

... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire

915

233

-

... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire

284

337

-

... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.

-

-

-

1056

124

-

446

162

-

50

208

-

... More
Supplying and fixing of following sizes of HR PVC casing caping along with accessories in surface as required.

-

-

-

50

108

-

50

122

-

138

192

-

... More
Supplying and fixing of following sizes/ modules GI Box along with modular base & cover plate in recess including connection, screw etc:

-

-

-

... More
2M Modular GI box

43

335

-

... More
3M Modular GI box

58

370

-

... More
4M Modular GI box

10

415

-

... More
6M Modular GI box

47

525

-

... More
8M Modular GI box

10

609

-

... More
12M Modular GI box

10

836

-

... More
Supplying and fixing of following sizes modular base & cover plate in recess including connection, screw etc:

-

-

-

... More
2M Modular GI box

43

156

-

... More
3M Modular GI box

119

156

-

... More
4M Modular GI box

10

206

-

... More
6M Modular GI box

93

243

-

... More
8M Modular GI box

10

294

-

... More
12M Modular GI box

10

405

-

... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections etc. as required

-

-

-

... More
6 A switch

271

112

-

... More
16 A switch

33

190

-

... More
6 A socket outlet

271

197

-

... More
6/16 A socket outlet

33

301

-

... More
Supply and fixing of 3M Modular switchboards each with 1 nos. of 6/16A modular socket (2M size) and 1 no. of 25A SP MCB complete with mounting plate, GI Box, cover plate, face plate, screw etc.

14

3150

-

... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

43

621

-

... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

35

49

-

... More
Supply and Erection of recess mounted light fitting with Philips Model No. RC380B LED25S-6500 G6 L60W60 PSU OD S1 or equivalent from Crompton, Bajaj, Havells. All the mounting accessories as required for installation of light fitting is included in scope of the Bidder.

120

3251

-

... More
Supply and Erection of recess mounted light fitting with Philips Model No. DN296B LED12S-6500 PSU WH or equivalent from Crompton, Bajaj, Havells. All the mounting accessories as required for installation of light fitting is included in scope of the Bidder.

20

1585

-

... More
Supply and Erection of LED Strip light -18.5W with Philips Model No. LS170S LED4 827 IP20 L5000 G2 or equivalent from Crompton, Bajaj, Havells. Required nos. of driver as per the installation shall also be considered/ supplied & installed along with the strip light. All the mounting accessories (strip, connector, jointer etc) as required for installation of light fitting is included in scope of the Bidder. Wires from strip to adapter, if required shall also be provided by Tenderer.

92

120

-

... More
Supply and installation of 1200mm sweep 5 star Ceiling Fan with Havells model no. FHCNF5SWHT48P or equivalent from Crompton, Bajaj, Usha, Orient. All the mounting accessories, installation arrangements (anchor fastnor of minimum 125 mm etc) as required for installation of fan shall also be included in scope of the Tenderer.

8

3265

-

... More
Dismentaling of ceiling fan and painting the same with one or more coat of spray paint with synthetic enamel paint to give an evan shade, including cleaning of surface with detergent and replacing the damaged rubber reel, nut & bolts with washers and safety pins and reinstallting the same along with the required installation arrangements (anchor fastnor of minimum 125 mm etc) as required.

32

408

-

... More
Supplying and fixing extra down rod of 10 cm length G.l. pipe ,15 mm dia, heavy gauge including painting etc. as required. (Note: More than 5 cm length shall be rounded to nearest 10 cm and 5 cm or less shall be ignored).

10

40

-

... More
Supplying and fixing extra conduit down rod of 20 cm length G.l. pipe 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)

40

46

-

... More
Supplying and Installing following size of prefabricated perforated Hot Dip Galvanized Iron cable trays (Galvanization thickness not less than 60 micron) with perforation not more than 17.5% in convient section, joint with connector, suspended from the ceiling with GI suspenders including GI bolts and nuts, angle iron, channel, fastener etc as required. Necessary Tee, bends, reducer, coupler etc if required for completion of the work shall also be included in the scope of Tenderer.

-

-

-

... More
100 mm width X 50 mm depth X 1.6 mm thickness

169

585

-

... More
225 mm width X 50 mm depth X 1.6 mm thickness

94

794

-

... More
Dismantling of existing wires, telephone wires, LAN cables, conduits, switch boards, light fittings, fans, DBs etc in existing building. Dismantling work includes the removal of the existing wires, conduits, switch boards, switches, sockets, light fittings, fans, DB etc. All the dismantlled items shall be shifted to location as informed by the client.

1

50000

-

... More
Miscellaneous items such as circular box, GI box, steel, insert plate, angle, channel, lug, ferule, tapes, bend, saddle, coupler, elbow, flexible conduit, connector, clamps, cable tie, Cable tags, anchor fasteners, insulating tapes, ceiling materials, welding, cleaning, nut, bolts, screw, sleeves, M-seal etc. or any other materials required to complete the work in all respect.

1

50000

-

... More
Telephone Works

-

-

-

... More
Supply and fixing of 100 pair Telephone JB with krone module

1

20000

-

... More
Supply and fixing of 20 pair Telephone JB with krone module

5

11000

-

... More
Supply of Analog CLI phones

63

3000

-

... More
Supply and laying of 20 pair 0.5 mm dia annealed copper conductor, FRLS PVC insulated, unarmoured, telephone cable

180

128

-

... More
Suply and laying of 2 pair, 0.5 mm dia annealed copper conductor, FRLS PVC insulated, unarmoured, telephone cable

1800

25

-

... More
Supply & Installation of RJ 11 I/O Box with face plate

63

100

-

... More
MODULAR FURNITURE

-

-

-

... More
The sharing workstation shall consist of 6 individual workstation of size 1500L1 - 1500L2 x 600D x 750/110H The total height of frame shall be 1200mm height.The partition based system shall be with main spine in 50 mm thick made by 1.2 mm thick CRCA sheet confirming to IS 513: (2008), IS 13871:1993. The end and intermediate spines of 30 mm thick. The profile of verticals should be able to slide the tiles thickness of 6 mm. . The verticals shall have multiple slots for carrying the data and power cables and provision for fixing MS brackets Slots shall be provided at different heights for fixing tabletop brackets, tiles and shelves. There shall be minimum three slots at different levels to accommodate raceways at skirting and table top levels.The slot provided should be of size- 150x 25 mm. the slot cut out should made by CNC machines to avoid sharp edges and burr. There shall be minimum four horizontal members in each frame- top , middle levels and at the skirting level. The horizontal members shall be made from CRCA sheets formed in “C” shape in hydraulic press. The CRCA sheets shall be confirming to IS 513: (2008), IS 13871:1993. The horizontal members should be fabricated with welded joints to the vertical which makes the frames sturdy and facilitates carriage of cables at different levels. The middle cross members shall have minimum two slots of size 150x25 mm for carriage of cable vertically from the floor to the raceways. The vertical and the cross members shall be CO2 MIG welded confirming to IS 816, ISO 9692- ISO 9692-3. The bottom cross member should be elevated by 120 mm from the floor level. All the frames should be fitted with M10 leveling bolts to adjust to ground undulations and capable of adjustment +/- 20 mm. the MS bolt shall be zinc passified with insert molded in PVC shoes.The aluminum trims and MS brackets shall be powder coated as per the approved colour. The aluminum trims and MS brackets undergoes 7 step rust resistance pre treatment process viz degreasing, pickling as per IS standard confirming to ASTM D 1186, ASTM D 1737, DIN 5156, IS 2360, IS 101, ASTM D 522, 523. ASTM D3451 – 06, -DIN EN 14901 - DIN EN ISO 9227, IS 3618 – 2016. After pre treatment process, the components are NANO coated and passified for better adhesion of paint as per IS 3618 - 2016. Cable management - The system shall have effective Cable management system. The data and the power cables shall be at different levels (called Raceways) to maintain the separations as per the IT norms minimum 300 mm apart. The wire management slots in the frames are large enough to manage high volume of data cables (CAT-6) - approx- 40-50 CAT-6 cables. Fabric Tile: Constructed out of 5.5mm thick Medium Density Fiber Board (MDF) confirming to IS – 12406 and covered with Fabric of choice. The fabric used shalll be confirming to BS EN 1021-1, BS 7176 & ISO 105-B02. The glue used for upholstery shall be made with advanced adhesives confirming to ASTM D 1500, ASTM 1298 standards. Sprayed with upgraded machines to ensure uniformity and best adhesion. Laminate Tile: Constructed out of 6mm thick Pre-laminated Particle board confirming to IS – 12923. Worktop -The table top shall be made of 25mm thick pre laminate partical board E1 norms with 2mm pvc edge band finish. Mobile Drawer Unit : It shall be of size of 400 x 450 x 600 (WDH) mm made up of 18mm thick Pre-laminate particle board as per E1 norms and its edges duly sealed with 2mm PVC Lipping on automatic machine at visible sides. Drawer front & sides shall be made up of 18mm, back 9 mm thick pre laminated particle board of E1 grade with visible edges sealed with 2mm PVC edge band. The drawer top surface shall be provided with finger groove handle-less design. Finger groove shall be created by providing a reverse tapered profile edge of 6mm straight surface & 12 mm tapered towards inside at 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Suitable lock shall be provided.The OEM shall have ISO 9001, ISO 14001, ISO 45001, ISO 50001, AIOTA, BIFMA LEVEL-2, IDM, GREENGUARD Certification by UL and IGBC Gold Rating for its manufacturing facility. In workstation CPU trolly and Keyboard tray shall be provided. Featherlite NEO (50-30) workstation (Six Person Module) or Approved Equivalent of Godrej or Geeken make.

7

163738

-

... More
The overall sharing workstation shall be size of 2400L x 1200D x 750/110H. The workstation shall be have 4 individual workstation of size 1200L x 600D x 750/110H. The worktop shall be made up of 25mm thick pre-laminated particle board of grade E1 low emitting material & duly finished with 2mm pvc edge band.The worktop height shall be 750 mm & height including partition screens shall be 1100mm. The understructure shall feature vertical legs made of 50 mm x 50 mm x 1.6 mm steel tubing, while the horizontal frame shall be constructed from 50 mm x 25 mm x 1.6 mm steel. A cross beam, sized 40 mm x 20 mm x 1.6 mm across the length of the table, will be installed beneath the tabletop to provide additional support. This cross beam shall be connected on both sides with pressure die cast connectors of 50 mm height, 70 mm width & 35 mm depth designed in a shape acting as spacer between horizontal frame & worksurface. The Intermediate leg: Two Verticals of Intermediate leg will have to be with 60x40mm rectangular ERW tubes and both legs are joined using a beam section of 40x40x1.6mm thk at the top side. The 60x40 verticals to have through “U” notch or through cut out of 40x41mm size at the top side to locate 40x40 cross beam. Understructure shall powder coated upto 40 to 60microns. For ease of wire management, The Raceways shall be provided below the work surface for carrying wires from one end to other end of the cluster, Size shall be 250mm Ht, Thickness 70mm. Provided with separator for data and power cables. Designed to accommodate 50-60 CAT-6 cables.The “Hook on” raceway covers shall be provided with opening from either side. The cover shall be made of prelam particle board.The switch/sockets shall be mounted on the Raceway covers as per the client requirement Switches and sockets shall be be accessed from the top by 65mm Dia gromet cap of the work surface.For entry of cables from the floor into the cable tray, Wire Entry covers shall be provided between the intermediate legs with separator for entry of power and data. 30mm Screen shall be size of 1350L x 350H. Aluminum 30 mm screen shall be provided above the table top mountable to be used as a desktop dividing screen. The 30mm thick screen shall be light and sleek.The screen shall be provided on both at main spine and at Intermediate for privacy as required. The design of the screen shall be made fully in an aluminum frame work. The structure of screen frame shall be constructed by using special anodizing grade (6063-T6 grade) of aluminum extrusion confirming to ISO -2768-2, EN AW 755-2, EN AW 573-3. The screen frame work shall be connected by Corner Clamps of 0.8 mm thick CRCA steel, passivated in Zinc Blue. The CRCA shall be confirming to ISO -2768-2, EN AW 755-2, EN AW 573-3. The connectors shall be made by Satin finished high pressure Zinc (Mazak 5) die cast caps confirming to IS:713.1981.The screen shall have aluminum top and side trims of 1.2 mm thick confirming to IS-733:2017. The screen design should offer tiles of Fabric screen. The tiles thickness should be 6mm thick. Surface finish for the screen should have options of anodizing finish and powder coating finish.. Fire retardant special fabric shall be used of 340 GSM. Upholstery: Fire rated fabric confirming to BS EN 1021-1, BS 7176 & ISO 105-B02 standards. Screen shall be fitted on worktop with the help of studs.In workstation CPU trolly and Keyboard tray shall be provided. Mobile Drawer Unit : It shall be of size of 400 x 450 x 600 (WDH) mm made up of 18mm thick Pre-laminate particle board as per E1 norms and its edges duly sealed with 2mm PVC Lipping on automatic machine at visible sides. Drawer front & sides shall be made up of 18mm, back 9 mm thick pre laminated particle board of E1 grade with visible edges sealed with 2mm PVC edge band. The drawer top surface shall be provided with finger groove handle-less design. Finger groove shall be created by providing a reverse tapered profile edge of 6mm straight surface & 12 mm tapered towards inside at 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Suitable lock shall be provided.The OEM shall have ISO 9001, ISO 14001, ISO 45001, ISO 50001, AIOTA, BIFMA LEVEL-2, IDM, GREENGUARD Certification by UL and IGBC Gold Rating for its manufacturing facility. Featherlite Perform workstation ( 4 Person Module ) or Approved Equivalent model of Godrej or Geeken make.

1

52783

-

... More
The overall size of meeting table shall be 2400L x 1200D x 750H. The table top shall be made of 25mm thick pre laminate partical board E1 norms with 2mm pvc edge band finish.The understructure shall be made of 25mm thick pre laminate partical board with 2mm pvc edge band all side. Middle modesty shall be made of 18mm thick pre laminate partical board with all the visible side 2mm pvc edge band. Both the gable end shall be connected to the modesty with 450mm height.Wire Management: 450 mm anodised flip up made of anodised aluminum finish, that shall have soft closure and three way wire acess & PVC cable tray for entry of cables from the floor into the cable tray.The OEM shall have ISO 9001, ISO 14001, ISO 45001, ISO 50001, AIOTA, BIFMA LEVEL-2, IDM, GREENGUARD Certification by UL and IGBC Gold Rating for its manufacturing facility. Featherlite ZEN conference table or Approved Equivalent model of Godrej or Geeken make.

1

64079

-

... More
The overall size of table shall 2000L x 800D x 780H with Side Unit Extention 1010L x 500D x 650H. The table top shall be made of 25mm thick with Pre laminate Partical board with all side 2mm pvc edge band finish. The working table top shall have size of 1800L x 800D. The table top visible side shall be 50mm thick. The edge of table top shall be cover with L-shaped alumimum extrusion with size of 10mm x 15mm.This aluminium extrusion shall increase the overall look of the table top.The main table top shall be supported on one side top supported pedestal and other side of side unit. 3 equal drawer unit shall be provided with size of 495 W x 800D x 650H. The drawer unit shall be made of 18mm thick pre laminate partical board with 2mm pvc edge band finish.The front modesty shall be made of 18mm thick pre laminate Partical board with 450mm height. Modesty shall be fitted on gable end with helps of mini fix. Wire Management: 1 No. Aluminium Flip Up and provision to mount swicthes and sockets on metal cable Dump and vertebra considered for wire uptake from floor to cable dump. Side return unit shall have overall size of 1010L x 500D x 650H.The body of side unit shall be made of 18mm thick pre laminte Partical board with 2mm PVC edge band finish.The side table design should be such that it has flexibility to be fixed either in right hand side or left hand side of the user during the time of assembly. The side unit shall have one openeble shutter with 2 equal compartment to keep the documents and rest area shall have open compartment.The OEM shall have ISO 9001, ISO 14001, ISO 45001, ISO 50001, AIOTA, BIFMA LEVEL-2, IDM, GREENGUARD Certification by UL and IGBC Gold Rating for its manufacturing facility. Featherlite Senate 501 Cabin Table or Approved Equivalent model of Godrej or Geeken make.

2

50464

-

... More
The overall size of table shall 1600L x 750D x 780H with Side Unit Extention 900L x 440D x 650H. The table top shall be made of 25mm thick with Pre laminate Partical board with all side 2mm pvc edge band finish. The table top visible side shall be 54mm thick. The edge of table top shall be cover with L-shaped alumimum extrusion with size of 10mm x 15mm.This aluminium extrusion shall increase the overall look of the table top. The gable end of table shall be made of 50mm thick pre laminate Partical board with 2mm pvc edge band finish all side. The main table top shall be supported on gable end and other side of side unit. The front modesty shall be made of 18mm thick pre laminate Partical board with 450mm height. Modesty shall be fitted on gable end with helps of mini fix. Wire Management: 1 No. Aluminium Flip Up and provision to mount swicthes and sockets on metal cable Dump and vertebra considered for wire uptake from floor to cable dump. Side return unit shall have overall size of 900L x 440D x 650H. The side return unit shall have 50mm thick top made of pre laminate Partical board. The side unit shall have 3 equal drawer with 1 openable shutter. The openable shutter shall have 2 equal compartment. The body of side unit shall be made of 18mm thick pre laminte Partical board with 2mm PVC edge band finish.The side table design should be such that it has flexibility to be fixed either in right hand side or left hand side of the user during the time of assembly.The OEM shall have ISO 9001, ISO 14001, ISO 45001, ISO 50001, AIOTA, BIFMA LEVEL-2, IDM, GREENGUARD Certification by UL and IGBC Gold Rating for its manufacturing facility. Featherlite Senate HT 531 Cabin Table or Approved Equivalent model of Godrej or Geeken make.

9

38165

-

... More
The overall size of Chair shall be height 915 to 1015 +/-5 mm, Back Width 415 mm at Top and 450mm at bottom, Seat Width 480 +/-5 mm, Seat Depth 440+/-5 mm and Seat height 460mm to 560 mm +/-5mm range. over all chair width should be 560 +/-5mm and Overall chair depth should be 670 +/-5mm. Seat should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat shall be upholstered with micro fabric 100% polyster 180 GSM abrasion 50000 cycles. No flamming or progressive smoldering within one hour of placement of the cigarettes. Fire rated fabric confirming to BS EN 1021 (match) should be used. The back frame shall be made up of PPGF and the injection molded in black color, armrest also in black color. The chair shall be supplied with Mesh Back rest. The Chair should be provided with center tilt two position lock Mechanism. The mechanism shall allow 360 degree revolving feature along with height adjustablility. Fixed arms connected to seat and back in the same colour. The mechansim shall possess seat to back recline ratio of 1:1. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Nylon Base to be provied. Twin castors 50 mm dia with PA6 material complying to ANSI/ BIFMA X 5.1 2017 standards. the axle pin shall be rust protected zinc passivated. The base shall be made up of nylon glass filled black color.The OEM shall have ISO 9001, ISO 14001, ISO 45001, ISO 50001, AIOTA, BIFMA LEVEL-2, IDM, GREENGUARD Certification by UL and IGBC Gold Rating for its manufacturing facility. Featherlite Alpha revolving chair or Approved Equivalent model of Godrej or Geeken make.

63

6783

-

... More
The overall size of Chair shall be : width 600 +/-5mm, depth 640 +/-5mm. Total height 1170 to 1270 +/-5 mm, Back Width 425 mm at Top and 500mm at bottom, Seat Width 500 +/-5 mm, Seat Depth 470+/-5 mm and Seat height 470mm to 570 mm +/-5mm range. Seat made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat shall be uplhostered with micro fabric 100% polyster 180 GSM abrasion 50000 cycles. Fire rated fabric confirming to BS EN 1021 (match) should be used. The chair shall be supplied with Mesh Back rest. The back frame shall be made up of Injection molded PPGF 20%. PU Adjustable Lumbar Support full length of size 365 mm, 110 mm height and 25mm thickness. The Chair should be provided with Self Calibrating Multilock Mechanism that should adjust the tension of the back sensing weight of the user. The mechanism shall allow 360 degree revolving feature along with height adjustablility. One Way Adjustable Arms (Height) to be provied with height adjustment button of size 73mm x 18mm made of Delrin P 500. The mechansim shall possess seat to back recline ratio of 3:7. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Nylon base shall be provided.Twin castors 50 mm dia with PA6 material complying to ANSI/ BIFMA X 5.1 2017 standards. The base shall be 660 mm PCD (26 inches) five pronged bases made up of PA6, 30% glass filled reinforced with bottom ribbing for additional buttress and strength.The OEM shall have ISO 9001, ISO 14001, ISO 45001, ISO 50001, AIOTA, BIFMA LEVEL-2, IDM, GREENGUARD Certification by UL and IGBC Gold Rating for its manufacturing facility. Featherlite Amaze HB chair or Approved Equivalent model of Godrej or Geeken make.

2

11279

-

... More
The overall size of Chair shall be : Total height 980 +/-5 mm, Back height- 585 +/-5 mm,Back width : 470 +/-5 mm,Seat width : 485 +/-5mm, Seat depth : 465 +/-5mm, Seat height : 475 +/-5mm. Seat and back should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat and back shall be upholstered with 100% polyster fabric of 295 GSM abrasion 50000 cycles. No flamming or progressive smoldering within one hour of placement of the cigarettes. Fire rated fabric confirming to BS EN 1021 (match) should be used. Chair shall have fixed armrest made of with Nylon 30% GF. The Frame shall be made out of ERW tubes with 25 mm diameter and 2.5 mm thickness pipe conforming to IS – 4923. Frame shall be welded by CO2 welding process for uniform finish conforming to IS 816. understructure shall connected with 4nos injuction ABS leg shoes.Frame shall offered with powder coat finish to provide an attractive finish. It shall be in black colour. The powder coating pre-treatment shall carried out with three in one chemical. After pre-treatment process, the components shall powder coated for better adhesion of paint. The frames shall powder coated with epoxy polyester powder to the thickness of 40-60 microns as per IS 101 and oven baked at 180°. The OEM shall have ISO 9001, ISO 14001, ISO 45001, ISO 50001, AIOTA, BIFMA LEVEL-2, IDM, GREENGUARD Certification by UL and IGBC Gold Rating for its manufacturing facility. Featherlite click visitor chair or Approved Equivalent model of Godrej or Geeken make.

25

7403

-

... More
The overall size shall be 900 x 450 x 1200 (WDH) mm. Top shall be made up of 18mm thick pre laminated particle board E1 norms and Back shall be made up of 9 mm thick pre laminated particle board with 2mm PVC edge lipping, Shutters shall be made up of 18 mm thick pre laminated particle board. 2 Shutters to be provied for compartment. Edge: All exposed shall be sealed with 2mm thick PVC edge lipping. The hinged doors top shall be provided with finger groove handle-less design for a streamlined look. Finger groove shall be created by providing a reverse tapered profile edge of 6mm straight surface & 12 mm tapered towards inside @ 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Locking faciltity should be provided for safe storage of documents.The OEM shall have ISO 9001, ISO 14001, ISO 45001, ISO 50001, AIOTA, BIFMA LEVEL-2, IDM, GREENGUARD Certification by UL and IGBC Gold Rating for its manufacturing facility. Medium Height Storage with Openable Shutter

40

10754

-

... More
The overall size shall be 900 x 450 x 750 (WDH) mm. Top shall be made up of 18mm thick pre laminated particle board E1 norms and Back shall be made up of 9 mm thick pre laminated particle board with 2mm PVC edge lipping, Shutters shall be made up of 18 mm thick pre laminated particle board. 2 Shutters to be provied for compartment. Edge: All exposed shall be sealed with 2mm thick PVC edge lipping. The hinged doors top shall be provided with finger groove handle-less design for a streamlined look. Finger groove shall be created by providing a reverse tapered profile edge of 6mm straight surface & 12 mm tapered towards inside @ 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Locking faciltity should be provided for safe storage of documents.The OEM shall have ISO 9001, ISO 14001, ISO 45001, ISO 50001, AIOTA, BIFMA LEVEL-2, IDM, GREENGUARD Certification by UL and IGBC Gold Rating for its manufacturing facility. Low Height Storage with Openable Shutter

40

7512

-



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements

Past Bidders
This list is curated from the bidders of the similar tenders in the past

Unlock the Tender details for free
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.