Urban Development Department Tender
Search from across the categories, cities, and authorities to find the latest Jharkhand tenders. Every Jharkhand tender is curated from credible sources of government websites (eProcurement Jharkhand portal) and newspapers, thus ensuring the credibility of the information presented to you. For more information on Jharkhand tender bidder registration, the login process and more read the FAQs section on this page.
Costs
EMD
₹ 3,07,253Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2018_UDD_34561_1Bid Award Id
ViewTender No
LNP/09/2018-19Tender Authority
Urban Development Department ViewPurchaser Address
-Website
http://http://juidco.jharkhand.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Extra for each subsequent lead upto 25 M beyond the initial lead of 50 M (Maximum upto 150M lead by head load) as per specification and direction of E/l.
3586.4
-
9.64
Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including' cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement complacted volume).
18.2
-
223.35
Providing P.C.C. M - 150 with nominal mix of (1:2:4) in foundation with approved quality of stone chips 20 mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/l.
156.1
-
5358.83
Providing P.C.C. M - 100 with nominal mix of (1:3:6) in foundation with approved quality of stone metal grade III (50 mm to 25 mm size) clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/l.
23.8
-
3876.35
Providing 25 mm thick damp proof course with cement concrete M-200 with nominal mix of (1:1.5:3) with approved quality of stone chips of 20 mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including, screening, shuttering and mixing cement concrete in mixer with 5% cico or any other approved water proofing compound and placing in position, striking, curing, taxes and royalty all complete as per building specification and direction of E/l.
6.9
-
172.89
R C C WORK
-
-
0.01
Providing RCCM-200 with nominal mix of (1:1.5:3) in foundation and plinth with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of FM 2.5 to 3 including screening, shuttering, mixing cemnt concrete in mixer and placing in possition, vibrating, striking, curing (but ecxcluding the cost of reinforcement, taxex and royalty all complete as per building specification and direction of E-I)
105.3
-
5829
Providing RCCM-200 with nominal mix of (1:1.5:3) in roof slab with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of FM 2.5 to 3 including screening, shuttering, mixing cemnt concrete in mixer and placing in possition, vibrating, striking, curing (but ecxcluding the cost of reinforcement, taxex and royalty all complete as per building specification and direction of E-I)
48.4
-
7523.28
Providing RCCM-200 with nominal mix of (1:1.5:3) in beam with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of FM 2.5 to 3 including screening, shuttering, mixing cemnt concrete in mixer and placing in possition, vibrating, striking, curing (but ecxcluding the cost of reinforcement, taxex and royalty all complete as per building specification and direction of E-I)
40.5
-
6972.73
Providing R.C.C.M - 200 with nominal mix of (1:1.5:3) in columns with approved quality of stone chips 20 mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/l.
39.27
-
6972.73
Providing RCCM-200 with nominal mix of (1:1.5:3) in lintel with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of FM 2.5 to 3 including screening, shuttering, mixing cemnt concrete in mixer and placing in possition, vibrating, striking, curing (but ecxcluding the cost of reinforcement, taxex and royalty all complete as per building specification and direction of E-I)
0.89
-
6393.51
PILE WORK ----Boring, providing and installation bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc by percussion drilling using Direct mud circulation (DMC) or Bailer and chisel technique by tripod and mechanical Winch Machine all complete, including removal of excavated earth with all its lifts and leads (length of pile for payment shall be measured up to bottom of pile cap). Note : Track Mounted rotary/TMR/Tube well boring machine shall not be used. 450 mm dia piles
210
-
1436.59
Providing TMT steel reinforcement of 8mm dia mm rods as per approved design & drawing - do - Providing Tor steel reinforcement of 10mm ,12mm & 16mm dia 20/25/28/32 mm dia TMT bar Fe 500 bars as per approved design and drawing
25.65
-
63762.52
BRICK WORK
-
-
-
Providing designation 75 A brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.
7.22
-
3840.03
Providing designation 75Abrick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints costs of screening materials, scaffolding, raking out joints to 15mm depth curing taxes and royalty all complete as per building specification and direction of E/I
54.15
-
3936.43
Providing designation 125mm thick reinforced designation 75A brick work in (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening carriage of materials, scaffolding, raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement0 all complete as per building specification and direction of E/I.
31.65
-
512.03
STONE WORK
0.01
-
0.01
Providing random rubble stone masonry in C.M. (1:4) in foundation and plinth with hammer dressed stone of less than 0.03 M3 in volume and clean coarse sand of F.M. 2 to 2.5 including cost of screening, raking out joints to 20mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.
157.95
-
2502.14
40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush Red sand stone
1272.64
-
606.43
Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate and base course and filling with 150 mm thick jamuna sand, including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge
864.5
-
1068.67
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Light shade pigment using white cement
50
-
870.48
WOOD WORK
0.01
-
0.01
Supplying ,fiftting and good quality. Well dressed and well seasoned sal wood work in chaukhat in doors, windows skylights, fanlights and C/W clerestory windows openinig, including wedge over all clams complete including application of coats of wood presevative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/I
0.35
-
59309.82
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bots,nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement :3 coarse sand :6 graded stone aggregate 20 mm nominal size)
54
-
113.85
S/F 30mm thick solid core type decorative single leaf flush door shutter with both side decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resin of stenderd make. Do
15.12
-
1803.25
STEEL WORK
0.01
-
0.01
Supplying, fitting and fixing rolling shutter of approved size and make up to 12 M2 area with push and pull operation properly fabricated with 80x1.22mm. M.S. lathes of white sheet , machine rolled and inter locked together through their length and jointed together at ends by end locks mounted over 38mm dia light M.S. black pipe shaft with end brackets made to size from 3mm M.S. sheet, guide channels made of 12 gauge sheet and 16/62 size SKF, NBC or equivalent bearings, one piece lock plate with special 2 nos 7 lever brass locks with inside and outside locking arrangement including cost of coiled type springs, stoppers, priming coat, greasing and taxes all complete as per building specification and direction of E/l.( Mode of measurement as per size of opening & when materials are not supplied by the deptt.)
14
-
2223.46
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
7788.79
-
82.51
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.
3019.1
-
453.5
Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth , carriage of grill to work site, hoisting as per building specification and direction of E/l. (where materials is not supplied by the deptt.)
10914.75
-
73.74
FLOORING WORK
0.01
-
0.01
Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l.
2188.73
-
231.26
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. 600 x 600 mm size
76.12
-
1074.62
Providing and laying 1st quality Ceramic glazed wall tiles thickness to be specified by the manufacturer) in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing polishing and cost of curing, taxes and royalty all complete as per building specification and direction of E/I.
96.71
-
715
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade Area of slab over 0.50 sqm.
14.49
-
2988.76
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.
9.8
-
2718.67
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
7
-
410.83
Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineerin-Charge 80mm thick Cement concrete paver block of M-30 grade with approved colour, design & pattern.
615.75
-
613.39
ROOFING & WATER PROOFING WORK
0.01
-
0.01
Providing and laying water proofing reatment in sunken portion , by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
25.8
-
286.36
Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement :4 coarse sand) mixed with 2% integral water proofing compound
109.53
-
420.91
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
65.87
-
146.88
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
4
-
187.09
FINISHING WORK
0.01
-
0.01
Providing and laying 15 mm - 23 mm thick kotah stone slab flooring of approved size, texture and colour over 19mm thick base of lime morter (1:1:1) (lime putty : surkhi: coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I. (iii) 600 x600 mm size
42
-
1455.17
Providing 12 mm. cement plaster (1:3) with clean coarse sand of F.M 1.5 including screeing. Curing all leads and lifts of water, scaffoling taxes and royalty all complete as per specification and direction of E/I.
32.28
-
140.52
Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I.
731.73
-
124.6
Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5
153.36
-
136.62
Providing 19 mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.
280.71
-
208.46
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
265.02
-
113.95
Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding, curing and taxes all complete as per building specification and direction of E/l.
533.61
-
85.55
Providing two coat of oil bound distemper of approved shade and make over a primer coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding, washing floors and taxes all complete as per building specification and direction of E/I.
594.18
-
78.11
Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing rust , dirt, , scales , smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/l. ( Mode of measurement Area shall be multiplied by the co-efficient as indicated in building specification)
606.38
-
43.75
Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly cost of scaffolding and taxes all complete as per building specification and direction of E/I.
618.38
-
53.71
Dismantling old plaster and pointing in cement or lime and raking out joints to 15 mm. depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/l.
615.75
-
15.46
ALUMINIUM WORK
0.01
-
0.01
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)
236.83
-
369.12
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
270.08
-
427.18
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.5mm thickness
32.09
-
963.79
CARRAIGE OF MATERIAL
0.01
-
0.01
CEMENTS (UPTO 5KM LEAD)
146.83
-
136.06
SAND (UPTO 5KM LEAD)
181.96
-
526.99
CHIPS (UPTO 15KM LEAD)
340.53
-
377.98
STEEL (UPTO 5KM LEAD)
22.12
-
136.06
BRICKS (UPTO 8KM LEAD)
92.59
-
760.98
De-Silting & Hyacinth Removal
0.01
-
0.01
E/W in stripping by hydraulic M/C in grade A/B type of soil including moorum soil ,soil mixed with kanker ,pebble boulder up to 300mm size and disposal of the same along with all organic material in the country side beyond 150 M up to 500m in all by tipper including construction & maintenance of haul road etc. all complete as per specification and direction of E/I
38273
-
164
Extra for wet earth all completed as per specification and direction of E/I
38273
-
10
Extra rate for quantities of work executed . Volume of water for 2.5m depth=
2.5m x 76546 sqm = 191365cum or 191365Kilo Liter,
1913.65
-
182.7
HORTICULTURE WORKS
0.01
-
0.01
Supplying and stacking of good earth at site including royalty and carriage up to 5 km (earth measured in stacks will be reduced by 20% for payment).
181.92
-
319.24
Supplying and stacking at site dump manure from approved source, including carriage up to 1.0 km (manure measured in stacks will be reduced by 8% for payment)
0.01
-
0.01
Screened through sieve of IS designation 20 mm
54.58
-
163.87
Screened through sieve of IS designation 16 mm
127.34
-
184.36
Screened through sieve of IS designation 4.75 mm
181.92
-
200.78
Supplying and stacking of well decayed cow dung manure at site including royalty and carriage up to 1.0 km (cow dung manure measured in stacks will reduced by 8% for Payment)
181.92
-
181.53
PREPARATION WORKS
0.01
-
0.01
Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure)
1440
-
44.01
Rough dressing the trenched ground including breaking clods
2100
-
0.86
Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation
2100
-
2.78
Fine dressing of the ground
2100
-
2.06
Mixing earth and sludge or manure in the required proportion specified or directed by the Engineer-in-charge
1440
-
20.49
Spreading of sludge, dump manure and / or good earth in required thickness as per direction of Engineer-in-charge (cost of sludge, dump manure and / or good earth to be paid separately).
1440
-
29.71
Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, levelling etc including stacking and disposal of materials declared unserviceable and surplus earth by spreading and levelling as directed, within a lead of 50.0 m, lift up to 1.50 m complete (cost of sludge, manure or extra earth to be paid for separately)
2525
-
125.13
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately)
0.01
-
0.01
Holes 1.2 m diameter and 1.2 m deep
69.6
-
277.28
Holes 90 cm diameter and 90 cm deep
8.7
-
97.34
Holes 60 cm diameter and 60 cm deep
8.7
-
29.9
Grassing with selection No1 grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the good earth shall be paid for separately)In rows 5 cm apart in both directions
1531
-
9.98
MAINTENANCE WORKS
0.01
-
0.01
Renovating lawns including weeding forking the ground, top dressing with fork soil (renovation lawn including weeding forking the groung top dressing with forked soil watering and maintenance the lowns for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing and disposal of rubbish as directed, including supplying good earth if needed but excluding the cost of well decayed farm yard manure)
1531
-
16.1
TREES
0.01
-
0.01
Supply and stacking of Alstonia scholaris plant of height 150-165 cm. in bag of size 25 cm as per direction of the officer-in-charge.
14
-
57.6
Supply and stacking of Azadirachta indica ( Neem ) plant of height 120- 130cm in big polybag of size 25 cm as per direction of the officer-in-charge.
10
-
57.6
Supply and stacking of Bauhinia purpurea (Kachnar) plant of height 150- 165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
15
-
57.6
Supply and stacking of Butea frondosa (Flame of Forest) plant of height 60-75 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
15
-
52.8
Supply and stacking of Dalbergia sissoo (Seasam) plant of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
12
-
48
Supply and stacking of Grevillea robusta (Silver Oak) plant of height 150- 165 cm. in big poly bags of size 25 cm as per direction of the officer-incharge.
6
-
48
Supply and stacking of Lagerstroemia flosreginae plant of height 150-165 cm.in big poly bag of size 25 cm as per direction of the officer-in-charge.
8
-
115.2
Supply and stacking of Mimusops elengi (Maulsri) plant of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge.
7
-
67.2
Supply and stacking of Polyalthia longifolia (Ashok) plant of height 150- 165 cm. in earthen pots of size 25 cm as per direction of the officer-incharge.
6
-
76.8
SHRUBS
0.01
-
0.01
Supply and stacking of Allamanda cathartica plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.
30
-
38.4
Providing and displaying of Dracaena rosea plant, having ht. 30 cm & above with 8 to10 leaves, well developed, fresh and healthy in 20 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge.
49
-
39.36
Supply and stacking of plant Gardenia jasminoides of height 45-60 cm. with 3-4 branches in earthen pots of size 20 cm as per direction of the officer-in-charge.
42
-
48
Supply and stacking of plant Hamelia patens of height 90-105 cm. bushy in big size HDPE bags as per direction of the officer-in-charge.
179
-
96
Supply and stacking of plant Hibiscus rosasinensis of height 90-105 cm., bushy in big size HDPE bag as per direction of the officer-in-charge.
115
-
76.8
Cuphea Providing and Displaying of of Cuphea chinensis plant of ht. 30-45 cm full of branches and healthy foliage in 25 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.
97
-
19.68
Supply and stacking of plant Bauhinia acuminata height 60-75 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge.
47
-
43.2
Supply and stacking of plant Nerium oleander (kaner) of height 45-60 cm. with 3-4 branches in poly bags of size 20 cm as per direction of the
officer-in-charge.
90
-
28.2
Supply and stacking of plant Plumbego capensis well developed with fresh and healthy 30 to 45 cm ht., with bloom in 20 cm Earthen Pot/Plastic Pot as per direction of the officer-in-charge.
72
-
57.6
Supply and stacking of plant Tecoma stans of height 45-60 cm. branched in earthen pots of size 20 cm as per direction of the officer-in-charge.
185
-
43.2
Supply and stacking of plant Tabernaemontana coronaria (Chandni single) variegated of height 60-75 cm, 5-6 branches in p.bags of size 25 cm as per direction of the officer-in-charge.
49
-
48
Providing and Displaying plants Cladium Hybrid variety 3 to 4 plants in a pot well developed with fresh & healthy foliage 30 to 45 cm ht. in different colour 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-incharge.
1375
-
59.04
Supply and stacking of Ipomea purpurea (Morning glory) plant of height30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.
1635
-
33.6
Providing and Displaying plants Gamphrina well developed fresh & healthy 30 to 45 cm ht. bushy plant 15 & above flower in 25 cm Earthen Pot/ Plastic Pot and as per direction of the officer-in-charge.
1510
-
39.36
Providing and Displaying plants Asiatic lilly hybrid variety (3 in one) plants in each pot having in full bloom 3 to 5 flowers 30 to 45 cm ht. well developed in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-incharge.
1790
-
118.08
Providing and fixing male ended 15 mm dia brass bib cock of approved quality ( wt not less than 350 gms ) with extra socket all complete as per specification and direction of E/l .
7
-
314.19
Providing and fixing 15 mm dia male ended C.I .Body brass spindle valve and seat bib cock of approved quality (wt not less than 400 gms ) with extra socket all complete as per specification and direction of E/l .
2
-
165.73
Providing and fixing 15 mm dia male ended C.I push cock (wt not less than 400 gms ) of approved quality with extra socket all complete as per specification and direction of E/l .
7
-
145.32
Providing and fixing brass / C.I. Stop cock of approved quality all complete as per specification and direction of E/l .
0.01
-
0.01
A) BRASS STOP COCK
0.01
-
0.01
(a) 15 mm dia
1
-
243.99
(b) 20 mm dia
1
-
320.78
Providing and fixing 15 mm dia and 45 cm. long P. V .C connection pipe with heavy quality brass coupling at both ends etc. all complete as per specification and direction of E/l .
7
-
116.68
(b) C.I. body brass spindle
7
-
253.93
(a) 15 mm dia wt not less than 300 gms
1
-
299.13
(a) 20mm dia wt not less than 400 gms
1
-
405.88
(a) 25 mm dia wt not less than 500 gms
2
-
501.82
(a) 32 mm dia wt not less than 700 gms
3
-
692.54
(a) 40 mm dia wt not less than 1kg
3
-
1215.76
(a) 50 mm dia wt not less than 1.5 kg
1
-
1342.07
Cutting drain width wise above G.L for laying G.I pipes and restoring with brick in cement mortar (1:4) 12mm cement plaster in (1:4) with neat cement punning as per specification and direction of E/l
7
-
132.39
50 mm dia
1
-
795.48
b)Mirrors of 6mm thick plate glass bevelled edge mirror including C.P. brass revolving fittings 3mm ply wood board and C.P. hinges to fix with mirror. (1)600x450 mm
7
-
1183.55
Supplying materials and construction of brick masonry drain 150 mm width and 150mm depth with 250mm apron on both sides over 50mm thick P.C.C (1:3:6) over a brick flat soling, apron laying brick work in C.M (1:6). 12mm cement plaster (1:3) with punning on exposed surface all complete job as per specification and direction of E/l
30
-
814.19
Supplying materials and construction of 600x600x90mm stop cock chamber of brick masonary with 125mm thick work of designation 75B in cement mortar (1:6) with 12mm thick cement palster in C.M. (1:6) on inside only.having 50mm thick R.C.C. cover having 12mm dia lifting rings, 2 nos. stop cock chamber will rest over 80mm thick P.C.C. (1:3:6) over one brick flat soling, including cost of earthwork, all complete job, as per approved design, specification and direction of E/I.
1
-
2485.97
Supplying, fitting and fixing 40 mm high viterous white glazed earthen ware E.W.C. with "p" trap of Parry Hindustan or any other I.S.S. make including supplying & fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450 grms. , 15 mm P.V.C. alkathene pipe 45 cm long with brass coupling at both ends and white/ black plastic solid state seal and lead of commander/ cuckoo or other I.S.S. make with hinges or screw etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l. ( b ) 12.45 lit. Low Level PVC Cistern. With 'P' trap
1
-
3991.9
Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of Parry Hindustan or any other I.S.S. approved make with 100 mm H.C.I., "p" trap 15 litres C.I.. or C. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32 mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I. body brass spindle stop cock of weight not less than 50 grms. 15 mm P.V.C. connection pipe 450 mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l.(B) 510 mm long (a) with 12.5 Lit low level PVC Cistern (a) With high level C.I. cistem
4
-
3871.31
Supplying fitting and fixing H.C.I. pipes with ear of approved make confirming to I.S.I. 1729 including supplying nails and bobins short pieces, cutting loose collars,lead and yarn for making lead caulked joints, cutting pipes to size including earth work or scaffolding where necessary etc. all complete as per specification and direction of E/I.(a) 100 mm dia
45
-
740.24
(b) 75 mm dia
5
-
545.64
(c) 50 mm dia
5
-
426.81
Supplying and fixing H.C.I, fittings of approved make confirming to I.S.S. 1729 including supplying nails and bobins lead and yarn for making lead chaulked joints including earth work or providing scaffolding as the case may be all complete as per specification and direction of E/l.
0.01
-
0.01
(A) H.C.I, single junction with door but without ear except socket
0.01
-
0.01
(i) 100mmdia(Wt. 10.5 Kg. app.)
1
-
1157.94
(ii) 80 mm dia (Wt. 7 Kg. )
2
-
924.09
(B) H.C.I. Heal Rest Bend 100 mm dia H.C.I. "P" Trap with
Anti Syphonage Hom (wt. 8.5 kg app.)
0.01
-
0.01
(i) 100 mm dia (Wt. 5.5 Kg. app.)
1
-
676.29
(ii) 80 mm dia (Wt. 4 Kg. app.)
1
-
531.1
(iii) 50mm dia (Wt. 3.5 Kn. app.)
1
-
468.25
(G) H.C.I, bend with door and ear
0.01
-
0.01
(i) 100 mm dia (Wt. 6.5 Kg. app.)
7
-
652.6
(ii) 80 mm dia (Wt. 4.5 Kg. app.)
1
-
501.2
(iii) 50 mm dia (Wt. 4 Kg. app.)
1
-
336.1
(D) H.C.I plain bend with ear
0.01
-
0.01
(i) 100mm dia (Wt. 5.5 Kg. app.)
6
-
622.7
(ii) 80 mm dia (Wt. 3.75 Kg. app.)
1
-
472.39
(E) Floor trap with gratings
0.01
-
0.01
(i) 100 mm dia
7
-
575.32
(I ) Norton patent H.C.I, cowl
0.01
-
0.01
(K) 100 mm dia (Wt. 3.25 Kg. app.)
1
-
539.27
Supplying materials and labours for painting the exposed H.C.I, pipes and fittings with 2 coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l. (i) 50 mm dia
5
-
24.01
(ii) 80 mm dia
5
-
36.93
(iii) 100 mm dia
7
-
44.31
Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes confirming to IS : 13592 Type A including jointing with seal ring confirming to IS : 5382 leaving 10mm gap for thermal expansion. --110mm dia
7
-
226.89
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised - Rigid PVC rain water pipes confirming to IS : 13592 Type A including jointing with seal ring confirming to IS : 5382 leaving 10mm gap for thermal expansion. Coupler 110 mm dia
2
-
98.54
Single Tee with door
2
-
174.28
Bend 87.5 deg 110 mm
2
-
108.57
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised - Rigid PVC rain water pipes confirming to IS : 13592 Type A including jointing with seal ring confirming to IS : 5382 leaving 10mm gap for thermal expansion. PVC Shoe
2
-
94.08
Providing and fixing unplasticised- PVC pipe clip of approved desing to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwes with M.S. Screw of required length including cutting brick work and fixing in cement mortar 1:4 ( 1 Cement : 4 Coarse sand ) and making good the wall etc. complete. 110mm dia
5
-
174.14
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.
6
-
4955.7
Providing and fixing gun metal non- return Vertical valve of approved quality (screwed end ) 0 mm dia nominal bore-vertical
1
-
1037.37
Providing and fixing C.P. bass angle valve for basin mixer and geyser points of approved quality conforming to I.S:8931.15 mm nominal bore
7
-
456.67
Constructing brick masonry road gully chamber 50 X 45 X 60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500 X 450 mm precast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S (non modular) bricks of class designation 7.5.
1
-
3881.37
Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in cement mortar 1:4 ( 1 cement :4 coarse sand) with pre-cast R.C.C. vertical grating complete as per standard design: With common burnt clay F.P.S.(non-modular) bricks of class designation 7.5.
1
-
4209.12
Constructing brick masonry road gully chamber 110x50x77.5 cm with bricks in cement mortar 1:4 ( 1 cement :4 coarse sand) including 500x450mm pre-cast R.C.C. horizontal grating with frame & vertical grating complete as per standard design: With common burnt clay F.P.S.(non-modular) bricks of class designation 7.5.
1
-
7221.26
Providing and placing on terrace (at all floor levels) storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license].
6000
-
6.96
Earth work in excavation for laying of different types and sizes of
R.C.C. spun pipes with disposal of excavated earth within initial lead and lift as per specification and direction of E/I.
(ii) For classification of soil item-B
315
-
201.49
Earth work in excavation for laying of different types and sizes of
R.C.C. spun pipes with disposal of excavated earth within initial lead and lift as per specification and direction of E/I.
(ii) For classification of soil item-B
Extra for earthwork in all kinds of soil foreach additional lift of 1M.or part there of over the intial lift of 1.5M. as per specification anddirection of E/I.
37.5
-
183.74
Earthwork in back filling the trench after laying different types andsizes of R.C.C. spun pipes with earth removed during excavation within initiallead and lift as per specification and direction of E/I
352.5
-
68.25
Labour for laying, fitting and fixing NP2 R.C.C. spun pipe with collars in lines, level and grade and providing approved jointing materials and joints properly filled to make them leak, proof including providing sight rails, bonning rod, night guard, Red light and barrier etc. all complete as per specification and direction of E/I.150 mm dia R.C.C. spun pipe
Upto 3.0 metre depth of invert below G.L.
280
-
158
225 mm dia R.C.C. spun pipe
Upto 3.0 metre depth of invert below G.L.
10
-
241
300 mm dia R.C.C. spun pipe
Upto 3.0 metre depth of invert below G.L.
10
-
283
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) alround SW pipes including bed concrete as per standard design. 150 mm diameter S.W. pipe
280
-
731.38
250 mm diameter S.W. pipe
10
-
985.92
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) upto haunces of SW pipes including bed concrete as per standard design. 300 mm. dia. SW Pipes
10
-
727.29
Construction brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand 4 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design.
0.01
-
0.01
Inside size 90 x 80 cm and 45 cm deep including CI cover with frame(medium duty) 500mm internal diameter, total weight of cover and frame to be not less than116 kg (weight of cover 58 kg and weight of frame 58 kg).-With FPS bricks of class designation 75.
2
-
8288.73
Inside size 120 X 90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg).With FPS bricks of class designation 75
1
-
17685.5
Extra for depth for manholes Size 90x80cm with FPS bricks of class designation 75
1
-
5489.85
Extra for depth for manholes Size 120x90cm with FPS bricks of class designation 75
1
-
6576.67
Providing M.S. foot rests including fixing in manholes with 20*20*10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) as per standard design : with 20 x 20 mm square bar
10
-
257.23
Providing and fixing square mouth SW gully trap class SP-1 complete CI grating brick masonry chamber and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.7 kg. as per standard design. 180x150mm size P type With common burnt clay F.P.S (non modular) bricks of class designation 7.5.
2
-
1638.88
Providing and fixing wash basin with CI brackets,15mm brass pillar taps,32mm CP brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever required. White vitreous china wash basin size 630 mm x 450 mm with a single 15mm CP brass pillar tap.
7
-
1939.77
WATER SUPPLY
0.01
-
0.01
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc, not exceeding 80 mm dia
20
-
132.53
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all (CPVC) plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge. Internal Work - Exposed on Wall -----15 mm nominal outer dia pipes.
5
-
137.23
20 mm nominal outer dia pipes.
80
-
172.75
25 mm nominal outer dia pipes.
100
-
207.55
32 mm nominal outer dia pipes.
35
-
308.3
40 mm nominal outer dia pipes.
20
-
308.3
50 mm nominal outer dia pipes.
10
-
464.83
Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This including jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the the same including testing of joints complete as per direction of engineer in charge. Concealed work including cutting chases and making good the walls etc. 15 mm nominal outer dia pipes.
5
-
236.35
20 mm nominal outer dia pipes.
48
-
273.45
25 mm nominal outer dia pipes.
20
-
320.25
32 mm nominal outer dia pipes.
15
-
396.38
Providing and fixing M.S. puddle flanges fabricated out of 6 mm thick M.S. plate of size 200 x 200mm plus dia of pipe of 600 mm long pipe pieces to R.C.C. water tanks / R.C.C. walls. The entire fitting shall be painted with black Japan paint. 25 mm dia
2
-
841.3
32 mm dia
3
-
1195.4
40 mm dia
3
-
1386.7
Supplying, installing, testing & commissioning digital water level indicator with pressure sensor electronic type complete with 4 level indicators, wiring from overhead water tank at terrace level / Underground water tank to Pump Room complete as per direction of Engineer-in- charge.
1
-
17247.97
TUBEWELL
0.01
-
0.01
Providing & fixing gun metal gate valve with C.I wheel of approved Quality (screwed end): 65 mm dia
1
-
1235.32
Providing & fixing gun metal non-return valve of approved Quality (screwed end):65 mm nominal bore Vertical
1
-
1708.94
Boring/Cost of drilling 200 mm x 165 mm x 125 meter deep bore well in all kinds of soil and rock in rural
area for installation of pump set with Hydraulic DTH Rig
machine, all complete including supplying all materials, tools, drilling rig, Air Compressor and equipments, as
well as fuel, lubricants and cost of transportation of Rig
machine and other vehicles up to the site All types of soil.
0.01
-
0.01
(i) From 0-50 meter
50
-
751.15
(ii) From 51-125 meter
10
-
861.06
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 200 mm dia
60
-
586.22
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
48
-
520.51
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200mm dia
1
-
222.48
Providing and fixing M.S. clamp of required dia to the top of casing / housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 200mm dia
1
-
1108.27
Providing and fixing bail plug/bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS: 2800 (part I). 200mm dia
1
-
243.79
ELECTRICAL BOQ
0.01
-
0.01
Supplying of following 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification as required.
0.01
-
0.01
3.1/2 core 35sq. mm.
170
-
180.88
3.1/2 core 25sq. mm.
50
-
142.02
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 25 sq. mm
300
-
197
Above 25 sq. mm and upto 120 sq. mm
120
-
208
Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 25 sq. mm
175
-
135
Above 25 sq. mm and upto 120 sq. mm
50
-
141
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ STONE WARE / METAL pipe/ Cable Trays as required. Upto 25 sq. mm
200
-
30
Above 25 sq. mm and upto 400 sq. mm
30
-
41
Supplying and making end termination of following sizes with brass compression gland including providing and crimping solderless plugs/ferrules of sizes PVC insulated PVC sheathed aluminum conductor armoured cable 1.1 KV grade.
0.01
-
0.01
3.1/2 core 35sq. mm.
2
-
270.72
3.1/2 core 25sq. mm.
2
-
246.72
3 core 6sq. mm.
2
-
150.72
3 core 10sq. mm.
4
-
164.16
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. 100 mm dia
30
-
340.8
Supplying and laying of following size DWC HDPE pipe ISI
marked along with all accessories like socket, bend, couplers
etc. conforming to IS 14930, Part II complete with fitting and
cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.
0.01
-
0.01
120 mm dia (OD-120 mm & ID-103 mm nominal)
40
-
219.84
63 mm dia (OD-63 mm & ID-51 mm nominal)
60
-
129.6
Supplying materials and labours for constructing inspection chamber of designation class 75B bricks size 750mm deep, 600x450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with600x475mm G.I. Cover with frame (weight not less than 36kg.) alongwith earth work in excavation and 80 mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per specification and direction of E/I.600 mm X450 mm X 750mm Deep Man hole
4
-
7089.13
Earthing with G.I. Earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (without charcoal or coke and salt).
2
-
3109
Extra for using charcoal and salt for GI/Copper plate earth electrode complete as required.
2
-
1542
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
20
-
123
Supply and laying 25mmX5 MM GI strip at 0.50 meter below ground as strip earth electride including soldering etc as required
30
-
83
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode
25
-
431
Supply of following sizes sizes of PVC insulated PVC sheathed aluminium conductor armoured 1.1 KV grade as per specification as required. 2C x 6 sq mm
800
-
67.42
2C x 10 sq mm
650
-
80.64
2C x 16 sq mm
225
-
95.66
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Upto 25 sq. mm
950
-
197
Supplying and making end termination of following sizes with brass compression gland including providing and crimping solderless plugs/ferrules of sizes PVC insulated PVC sheathed aluminum conductor armoured cable 1.1 KV grade. 2C x 6 sq mm
30
-
150.72
2C x 10 sq mm
18
-
151.68
2C x 16 sq mm
8
-
169.32
2C x 25 sq mm
4
-
164.16
Wiring for curcuit Submain wiring along with earth wire with the following sizes of PVC insulated copper conductor single core cable in surface of recessed PVC conduit as reqd.2 x 2.5 sq.mm + 1 x 2.5 sq. mm earth wire
200
-
173
2 x 4.0 Sq mm + 1 x4 Sq mm earth wire
150
-
211
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc as required
1800
-
32
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc as required ( but with out charcoal/coke and salt)
6
-
2510
Extra for using charcoal and salt for pipe earth electrode complete as required.
6
-
1429
Supplying and fixing 50mm dia GI pipe on the pole for cable entry to junction box as required.
40
-
372.48
Supply and istallation of 300 mm, 230 V AC exchaust fan in the exiting openig following size sweep with louvers shutters including all accessories/as par required.
4
-
2287
Wiring for Light point / Fan point / Exhaust Fan point / Call Bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit , with modular switch ,modular plate ,suitable GI box as required a) Group - C
15
-
752
Wiring for curcuit Submain wiring along with earth wire with the following sizes of PVC insulated copper conductor single core cable in surface of recessed PVC conduit as reqd. 2 x 1.5 sq.mm + 1 x 1.5 sq. mm earth wire for invortor wiring
20
-
146
Wiring with 2 x 2.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit alongwith 1 No. 2.5 sq.mm FR PVC insulated copper conductor single core cable for loop earthing as required.
60
-
173
Wiring for light / power plug point with 2 x 4 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC Medium Class conduit alongwith 1 No. 4 sq.mm FR PVC insulated copper conductor single core cable for loop earthing as required.
70
-
212
Supplying and fixing suitable size GI box with modular plate and cover in Front on surface or in recess ,including providing and fixing 3 pin 5 / 6 amps modular socket outlet and 5 / 6 amps modular switch,connection,painting etc.as required.
4
-
241
Supplying and fixing suitable size GI box with modular plate and cover in Front on surface or in recess ,including providing and fixing 6 pin 15 / 16 modular socket outlet and 15 / 16 amps modular switch,connection,painting etc.as required.
6
-
307
Total Scheduled Item Rs.
1
-
1
ADD @ 12 % GST
22115954.57
-
0.12
CHILDREN PLAY EQUIPMENT
0.01
-
-
Supplying and fixing MULTI PLAY SYSTEM 11/2/2017- Multi play system which involves activities like sliding, climbing, exploring, balancing, crawling etc. 6. 8m, x 5. 5 m ( 2 m high) all complete as per direction of engineer-in-charge
1
-
216216
Supplying and fixing FRP ROLLER SLIDE 1.5 M : a). Durable FRP molded fiber glass with slide with Polyethlyene Rollers b). Long, easy-grip handrails accommodate kids with different reaches ,size 4.7m X 1m , all complete as per direction of engineer-in-charge
1
-
97240
OUTDOOR GYM EQUIPMENT
0.01
-
-
LEG LIFT POST – PGOFT 01 Product Area : 1.8 X 0.8 Mtr Safe Play Area : 2.8 x 1.8 MtrThe main frame of LEG LIFT POST is made up of 80 NB G.I. pipes. 6 no of spacer pipes made by 25 NB G.I. pipes are arranged parallel at equidistance to form a back rest of product. The paired handle pipe consists of 25NB galvanized pipe fixed at the top and bottom of 80NB support pipe main frame. All pipes are uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment.. LEG
1
-
11616
FOREARM TWIRL – PGOFT 02 Product Area : 1.5 X 0.8 Meter
Safe Play Area : 2.5 x 1.8 Meter 25NB Galvanized pipe bend to form ring and spokes consists of 20NB G.I. pipes that connect to each other to form a pair of wheels of FOREARM TWIRL. These wheels are mounted on both ends of 40 NB G.I. pipe bend with specially designed bearing housings and shaft assemblies. This bend pipe is fixed to main frame of 80 NB G.I. Pipe. Handle is fixed over the pipe ring for free movement of wheels. All pipes are uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment. Handle for rotating the ring fixed over the pipe ring.
1
-
23496
ABS BOARD – PGOFT 03 Product Area : 1.6 X 0.8 Mtr Safe Play Area : 2.6 x 1.8 Mtr The main frame of ABS BOARD is made up of 80 NB G.I. pipes with leg support structure. The back rest is fixed over 40NB back rest frame. Back rest is made up of rectangular pipes of 50 X 25 X 3 mm thick. All pipes are uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. All open ends of pipe closed by GI / HDPE caps for user safety against entrapment.
1
-
22352
AERIAL STROLLER – PGOFT 06 Product Area : 1 X 0.5 Mtr Safe Play Area : 2 x 1.5 Mtr The main frame of AERIAL STROLLER is made up of 80 NB G.I. pipes with G.I. plating up to 40 micron thickness. This main frame is rest on 80 NB G.I. Pipe to give it strength. Foot rest bend pipe is made up of 40 NB G.I. pipes. Foot rest is made with the help of high quality FRP (Fiber Reinforced Plastic) material. Foot rest is mounted on main frame with the help of specially designed bearing assembly for its free movement. Bearings used are oil sealed,self-lubricated . Handle is made by 25 NB G.I. pipes. All pipes are uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment.
1
-
31328
AERO RIDER – PGOFT 07 Product Area : 1.2 X 0.5 Mtr Safe Play Area : 2.2 x 1.5 Mtr The main frame of AERO RIDER is made from 100 NB & 40 NB galvanized pipe with powder coating of minimum 60 micron thickness. Handle support pipe linked to seat via 25NB Galvanized pipe. Handle pipe consists of grip of 20 NB G.I. pipes with suitable PVC grip. The Handle pipe extended to connect foot grip of 25 NB & 20 NB G.I. pipes via 40NB Galvanized pipe. The handle support pipe is pivoted over 80NB support pipe with Zinc plated rectangular tube.The HDPE/ LLDPE/FRP Seat rest over the 75x10 mm niformly powder coated up to minimum 60 micron thickness to avoid corrosionHDPE caps for user safety against entrapment
1
-
37400
SHOULDER EXERCISER – PGOFT 11 Product Area : 1.2 X 0.9 Mtr Safe Play Area : 2.2 x 1.9 Mtr 100NB Galvanized main vertical support pipe fixed over square tube of 25 x 25 mm bottom frame. FRP / HDPE / LLDPE plastic seat fixed over 40NB G.I. bend pipe. Footrest is provided to seat frame which is made up of 25NB G.I. pipes. This seat frame is hinged over vertical support pipe through 40NB galvanized pipe links with the help of specially designed bush bearings. The handle pipe consists of 25 NB galvanized pipe. Handle is linked to the seat with 40NB pipe which is hinged to main vertical support pipe with the help of specially designed bush bearings. All pipes are uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment.
1
-
53240
SHOULDER EXERCISER DOUBLE – PGOFT 24 Product Area : 2.2 X 0.9 Mtr Safe Play Area : 3.2 x 1.9 Mtr The main frame of Shoulder Exerciser Builder consists of 80NB G.I. pipe with two specially designed brackets attached on it. Brackets are made of M.S. material with G.I. plating. The connecting links are made of 40NB G.I. pipes which are mounted to main frame with the help of specially designed, machined shaft and bush bearing. The handle frame is made of 25 NB galvanized pipe. Handle is linked to the seat with 40NB pipe which is hinged to main vertical support pipe with the help of specially designed bush bearings. FRP / HDPE / LLDPE plastic seat fixed over 40NB G.I. bend pipe.
1
-
85800
Footrest is provided to seat frame which is made up of 25NB G.I. pipes. This seat frame is hinged over vertical support pipe through 40NB galvanized pipe links with the help of specially designed bush bearings. Foot rest is made up of 20 NB G.I. pipes. Specially designed Nylon pads are provided at the bottom of seat frame. All pipes are uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment.
1
-
97500
LEG PRESS DOUBLE – PGOFT 25 Product Area : 2.5 X 1.2 Mtr
Safe Play Area : 3.5 X 2.2 Mtr The center frame of Leg Press Double is made up of 40NB G.I. pipe bend and G.I. sheet with two specially designed brackets attached on it. Brackets are made of M.S. material with G.I. plating. The moving frame of Leg Press is made of 40NB G.I. pipes which are mounted to main frame with the help of specially designed, machined shaft and bearing housing. Bearings used are oil sealed, self-lubricated made by reputed company. Foot rest is hinged to main frame with the help of specially designed G.I. plated clamp and 25 NB G.I. pipes. Gusset plates are provided to give extra strength to foot rest. Foot rest is made of high quality FRP (Fiber Reinforced Plastic) material. Specially designed Nylon pads are provided at the bottom of moving frame. Seat and back rest provided are made of FRP/ LLDPE / HDPE plastic. All pipes are uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment.Footrest is provided to seat frame which is made up of 25NB G.I. pipes. This seat frame is hinged over vertical support pipe through 40NB galvanized pipe links with the help of specially designed bush bearings. Foot rest is made up of 20 NB G.I. pipes. Specially designed Nylon pads are provided at the bottom of seat frame. All pipes are uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment.
1
-
84040
Providing & Fixing of uPVC pipe conforming to IS:4985 :2000 and suitable for the respective working pressures with all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adapters, flanged tail pieces etc. jointing as per manufacturers' instruction.
0.01
-
0.01
uPVC Pipe 63mm OD-06 Kg/ cm2
699
-
110
Quick Release Coupling Valve/¾" (By Quotations)
35
-
1190
Key/Openor/¾"
14
-
519.2
Swivel Elbow/¾"
17
-
385
P.P Service Saddle (By Quotations)
35
-
375
Pump Connection with by pass Assy/2"
1
-
7100
R.C.C for QRC/¾"
34
-
200
LIGHTING FIXTURE
0.01
-
0.01
Supply and installation , foundation and commissioning of landscape lighting complete with cement concrete foundation. Rated Voltage 240V, 50 Hz System Wattage 8W±10% ,Rated Current 0.037 Amp
Power factor ≥0.90, Driver Efficiency 80%, Optical LED- LED Product Lumen Output 450, CRI 70
CCT 3000±510, Housing Aluminium Die Cast with Powder Coating , Optics Opal white Polycarbonate Diffuser
Size (HX Dia.) 800X Ø209mm (tol.±5 mm) ,Protections ,Ingress Protection (IP) IP54,Surge Protection 2.0 KV ,Over Voltage Protection Withstand upto 300V, Open Circuit Protection Provided,Short Circuit Protection Provided, Product code-LBLD03R108XW . Make- JAGUAR
ISReferences : IS 10322 (Pt. 5 /Sec.1)
40
-
7671.84
FLOATNING FOUNTAIN 2 NO
0.01
-
0.01
80ft – 100ft. HIGH JET FLOATING FOUNTAIN High Jet Nozzle: 1 no. (One Set) Ball Joints: 1 no. Floater/Boat: 1 no. (Fiber made Boat) Header: 1 no. Ht. of Water Effect: 80-100 ft. approx. (Adjustable) Pump Power: 35 hp, 3 phase, ISI mark, PRIMA make, Sub. Fountain Pump 1 no. (H/D, Continuous running Pump with mechanical seal, Copper rotter, Vertical fountain Pump) No. of Lights: 10 nos.- 12V/36W, 3 – 5 colors, Under water/submersible LED Fountain lights. SMPS: 1 No. RGB, Controller: 1 No. Cables & Electrical Materials:Double insulated 3 core PVC copper conductors for pump and 2 & 3 core round cables for lights. (Only 100 mtrs. cable provided by us with the system) Extra Sub. Cable for Pump And Lights: Rs. 390/- mtr. for pump and Rs. 240/- for lights. (Aprox. 100 - 200mtr extra cable required)Electrical Panel: Supply of complete full automatic electrical control panel system consisting of main switch (MCB), starter with over load relays for pumps, etc. (All electrical equipments will be from a reputed company like L&T, Crompton Greaves, Havells, etc.) Filter for Pump: 1 no. (Double layer) Anchor Rope: As per requirement for Float Anchoring. Plumbing Work: Supply and fitting of plumbing materials for complete fountain system only. Guarantee: One year from the date of supply of the equipments. DECORA FOUNTAINS
2
-
809952
SCULPTURE WORK
0.01
-
0.01
Providing and fixing 6 feet high sculpture. Fiber glass resign metallic finish all complete as per direction of E/I.
1
-
334400
Providing and fixing 6 feet high sculpture. Fiber glass resign stone finish all complete as per direction of E/I.
1
-
232320
SOLAR WORK--- 1. PV module 12V 75 WP: 1 No 2. LED luminary 9 /12watt LED : lumens : 1 No ( Dusk to dawn Operation ) With built in charge controller 3. Battery 12 V 40Ah /42 Ah SMF /VRLA / Lead Acid - 1 No
4. Pole M.S with battery box : 5m length
5. Dia of Pole - 45mm & Guage - 1.8mm , The solar street light is a stand alonesystem , with dusk to dawn operation . with 3 days autonomy . Warranty : 5 years on the PV module ( Module life 25 years ) Life 25 years ) Luminary : 2 years warranty ,Battery : warranty 36 months Cable : 4 Sq. mm, 2 Core for Self mounted & Hardware & Acc. : As per the configurations made.
20
-
27720
ELEMENTS FOR ENTERTAINMENT WORK
0.01
-
0.01
Supplying Prefabricated Fibre motor boat Subjected to scope for boating. 2 Seater Seater all complete.
2
-
145200
Supplying Prefabricated Fibre paddle boat subjected to scope for boating. 4 Seater all complete.
4
-
47520
PUBLIC ADDRESS SYSTEM
0.01
-
0.01
Weatherproof Loudspeakers 112 dB Sensitivity, 93 dB frequency Response, 75 Hz - 20 kHz Impedance 16 omega Transformer taping 100v: 20w/30w/40w/60w 70V : 10w/15w/20w/30w Amplifier Power : 100w Peak : 200w 240 w Amplifier High efficiency class-D series digital power amplifier Gooseneck wired microphone Gooseneck wired microphone, CVG-12rs-B/C-X, 12'' long stem, with suitable base and Mic.Cable with XLR Connector for diferent application Microphone with Hand held mike (wireless) Available frequency - between 698 - 787 MHz Operating Range 18m to 75 m Audio Freq. response - 50 Hz - 15 KHz Max. output level - 19 dBv (XLR), -6dBv (1/4'') uto cut Voltage stabiliser Available frequency - between 698 - 787 MHz Operating Range 18m to 75 m Audio Freq. response - 50 Hz - 15 KHz Max. output level - 19 dBv (XLR), -6dBv (1/4'') 59175 Auto cut Voltage stabilise 3 KVA Manual Auto cut Voltage stabilise mixer with eco effect r6 chanel stranger mixer with eco effect and pen drive favility UM-6 6 U Rack wall mount 550 W* 450 D loaded for installation of microphone receiver, amplifier and accessories Heavy wire and pvc casing Heavy wire and pvc casing for underground wiring, speaker mounting brackets, interconnecting
1
-
225888
DUSTBIN
0.01
-
0.01
Supplying 70 Ltr. Fibre-reinforced plastic (FRP) Rabbit dustbin in all complete as per E/ I
2
-
7022.4
Supplying 60 Ltr. Fibre-reinforced plastic (FRP) Penguin dustbin in all complete as per E/ I
2
-
6941.44
Supplying 50 Ltr. Fibre-reinforced plastic (FRP) Frog dustbin in all complete as per E/ I
2
-
8360
Supplying 50 Ltr. Fibre-reinforced plastic (FRP) Dog dustbin in all complete as per E/ I
1
-
8096
Supplying 50 Ltr. Fibre-reinforced plastic (FRP) Elephant dustbin in all complete as per E/ I
2
-
8668
Supplying 50 Ltr. Fibre-reinforced plastic (FRP) Bear dustbin in all complete as per E/ I
1
-
8668
Supplying 50 Ltr. Fibre-reinforced plastic (FRP) Dolphin dustbin in all complete as per E/ I
2
-
6732
Supplying Made of Virgin UV stabilised HDPE of diff capacity in all complete as per E/ I ,100 Litre
1
-
1038.4
Providing and Fixing of talab DELUXE BENCH (GI) – PGGD 05 Product Area :- 1.3 m x 0.9 m Capacity :- 3 Adults This deluxe bench is of attractive kind and can be used in gardens or at swimming pools. It can comfortably occupy 3 adults at a time. The main frame is made up of 25 NB powder coated GI pipe. The seat is made from GI perforated 18 SWG sheet, which is bent to give maximum support to the human body.
20
-
16500
PLUMBING SYSTEM-NON SCHEDULE ITEMS
0.01
-
0.01
Providing & fixing Sink Mixer with Swinging Casted Spout (Wall Mounted Jaquar model CON-319 KNB/approved equal) with 450mm long copper pipes & brass nuts.
1
-
4106.3
Providing and fixing G.I. Inlet fitting of suitable size with 1 to 3 Nos. G.I. Sockets of 32 to 50 dia welded to G.I. pipe 100mm dia and dipped in hot bitumen complete in all respect.
7
-
1051
Providing & fixing 100m x 50mm G.I. waste with G.I. reducer including 102mm dia CP Glossy Grating Jayna model no. RRB 102),cutting chases in the floor / slab complete as required.
3
-
1400
Providing and fixing brass clean out plug with suitable inlet key for opening male threaded joint with pipe & socket complete as required.
2
-
980
Supply and installation of of following type LED/CFL fixtures shall be complete with Electronic Ballast, PF improvement capacitor, Control gear box. lamp holder, starter, starter base, all pre wired upto the terminal block. All fixtures shall be supplied with lamps.(make Philips /Bajaj/ Wipro/Throne/Trulite/ equivalent).
0.01
-
0.01
6W Round surface mounted type LED Luminiare (BAJAJBZSLH 6W WH or Equal)
25
-
1046.6
6W outdoor surface mounted type LED Luminiare
6
-
1700.2
Bio remediation shall be done by introducing bio-culture, Bio remediation or Bioculture introduction is the application of a biological treatment, mainly microbes, to the cleanup hazardous contaminants in soil and surface or subsurface waters. These microorganisms can be used to transform them to less harmful forms.
1
-
500000
ADD @ 1 % Labour Cess
30420981.1
-
0.01
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements