Jharkhand Urban Infrastructure Development Company Limited Tender
Search from across the categories, cities, and authorities to find the latest Jharkhand tenders. Every Jharkhand tender is curated from credible sources of government websites (eProcurement Jharkhand portal) and newspapers, thus ensuring the credibility of the information presented to you. For more information on Jharkhand tender bidder registration, the login process and more read the FAQs section on this page.
Costs
EMD
₹ 75,00,000Document Cost
₹ 25,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_JUADB_44633_1Bid Award Id
ViewTender No
JUIDCO/NIT/HWS/JURLP/OCB/2/339Tender Authority
Jharkhand Urban Infrastructure Development Company Limited ViewPurchaser Address
-Website
http://jharkhandtenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Ventury Flume-With Necessary Devices,Consisting Of simple mechanical indicator.(pedestal type gauge)
-
-
-
Flash Mixer-Rapid Mixing devices,detention time 60 seconds to give velocity gradient 300 to 400 sec-, vane mixer type conforming to I.S 7090 of 1985.
-
-
-
Flocculator- Conforming to I.S.7208-1974 (Type-c) With Detentation Period Of 30 minutes
-
-
-
Clarifier - Horizontal Flow Circular Tank, detantion period 2-5 Hours over flow rate 30 cubic meter per Square Meter per day (to be specified).weir loading not more than 300 cubic meter per meter per day,with mechanical sludge scraper conforming to I.S.No.10313-1982 with necessary inlet arrangements.
-
-
-
Rapid sand filter sand filter house-filter designed for filteration rate of 5000 liter per square meter per hour, minimum two beds for plant up to 10 MLD, for larger plant as specified filters to located in filter house with roof slab,pipe gallery and platform minimum 5.5 meter in width with constant rate filtration or declining rate filtration.
-
-
-
A) Filter sand-effective size 0.45 to 0.70 mm, uniformity coefficient not more than 1.7, nor less than 1.3, depth of water over sand 0.75 m, free board 50 cm. gravel 0.45 m in depth, sand and gravel conforming to I.S.8491 (i)-77, back wash by air wash, sand and appurtenances (to be specified),rate of flow controller, filter gauge, sand expansion gauge, etc.
-
-
-
B) Wash Water Tank - Capcity to be specified and suitable to supply water to wash specified number of filter beds at a time 12 min @ 600 lit/sqm/min. Under a head of 12 m at under a drain.
-
-
-
C) wash water pumps-capacity to fill water tank in 1 hour with 100% stand by.
-
-
-
D) Air Blowers-capable of delivering 600 LMP Per square meter of free air, of filter area at 0.4 kg/sqcm at the under drains (100 % standby) for period of 5 min.
-
-
-
Chemical house in two storeys
-
-
-
A) Ground floor to accommodate 7 days alum requirement and sundry storage.
-
-
-
B) First floor to accommodate alum and lime tanks.etc.
-
-
-
C) Solution tanks-minimum 3 tanks (one for preparation,second for dosing and third as standby), each tank capable of giving 8 hours maximun does without interruption,minimum free board 0.30 m, trays for dissolving, level indicator, mechanical agitation devices, solution feed and drain lines, solution feed devices (constant head devices,strength of solution upto 10% only) conforming to I.S 9225 part -I 1979
-
-
-
Pure Water Sump & Sump House
-
-
-
A) Capacity of sump - one hour of designed flow.
-
-
-
B) Pump House- pump house of required size over the sump or by the side
-
-
-
store house-suitable for alum storage of three months requriment in monsoon with 10% capacity for other sundry articles.
-
-
-
Vacuum feed type chlorinaters
-
-
-
A) Conforming to I.S 10533-A Part-II 1983
-
-
-
B) Chlorinator equipment and container room to conform to I.S 10553 Part-I 1983
-
-
-
C) 100 % standby shall be provided
-
-
-
By pass arrangement- C.I or M.S. Pipes By passing all units of T.P. (ii) By passing flash mixer, clariflocculator. (iii) by passing flash mixer , clariflocculator and filter units.
-
-
-
Disposal Of Waste From WTP : safe disposal arrangement to near by nala including cost of pipe
-
-
-
For WTP of capacity 30 MLD & more additional arrangement for backwash water recycle shall be provided, including sump,pumping machinery,rising main etc complete.
-
-
-
Drainage Arragemengts - RCC pipes up to plot boundry of each unit and futher extension with RCC pipes to nearby nalla.
-
-
-
Electrical installation - Both internal and external including entire plant area.
-
-
-
Laboratory equipment - As per requirement
-
-
-
Sanitary blocks- carpet area -15 square meter minimum upto 25 mld and 25 square meter above 25 mld
-
-
-
Administrative block and internal road to accommodate office room, chlorine room, panel board room etc, and WBM road to connect all units from main gate of plot.
-
-
-
Rate Given Below are inclusive of up lift pressure if any and dewatering during entire work.
-
-
-
Disposal Of Waste From WTP : safe disposal arrangement to near by nala includin cost of pipes.
-
-
-
For WTP of capacity 30 MLD & more additional arrangement for backwash water recycle shall be provided, including sump,pumping machinery,rising main etc complete.
-
-
-
All pipes conducts channels with 22% overloading
-
-
-
These rates are applicable for seimic zones-,B 2,3 and 4.
-
-
-
All RCC Structure Shall be constructed in M-300
-
-
-
All pipes conducts channels with 20% overloading capicity.
-
-
-
Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand Providing all labours and necessary equipment for designing & construction of Conventional WTP of 9.5 MLD capacity. With all complete job.
1
-
-
Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand Providing all labours and equipment for designing & construction of ESR all complete job.
-
-
-
Designing (aesthetically), and constructing RCC elevated service reservoirs of following capacity with RCC staging Consisting of columns, interval and External bracings spaced vertically not More than 4.5 meters centre to centre for EST having capacity upto 500 Cum including Excavation in all types of strata, foundation concrete, cement plaster with water proofing compound to the in side and out side face of the container and also plaster with plastic paint in all Columns and Bracings including refilling disposing off the surplus stuff with in a lead 50 meters, all labour and material charges including lowering, laying erecting hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design, providing and fixing accessories such as M.s. ladder out side, Stainless Steel lader in contenor, C.I. manhole frame and covers water level indicators, lightening conductor, G.I. pipe railing around walk way and top slab providing stair case from ground level to roof level, M.S Grill gate of 2M height with locking arrangement of approved design, B.B Masonry chambers for all valves, ventilating shafts, providing and applying three coats of Acrylie emulsion with silicon edditives paint to the structure including roof slab epoxy painting to internal surface and anti-termite treatment for under ground part soft the structure and giving satisfactory water tightness test as per I.S. code. The job to include painting then ame of the scheme and other details on the reservoir as per the directions of Engineer In-Charge.
-
-
-
Notes
-
-
-
The design of the structure be in accordance with relevant I.S. specification (I.S.3370-1965 or revised.)
-
-
-
The design shall satisfy the stipulation as per I.S. 189-1894 and I.S.13920/1993 for seismic force and I.S.-11682/1985 for R.C.C. staging of overhead tanks and for seismic zone 3.
-
-
-
For design having more than 6 columns, suitable bracing is obligatory.
-
-
-
The entire structure shall be in M-250 mix only.
-
-
-
Plain round mild steel bars grade-I conforming to I.S. 1786 or I.S. 1139 shall beused, grade-I mild steel bars will not be allowed
-
-
-
Irrespective of the type of foundation proposed in the design,one set of bracing be provided at the ground level.
-
-
-
These rates include providing M.S ladder for E.S.R.s up to 2 lakh liter capacity and providing spiral stair case for ESR above 2 lakh liter capacity
-
-
-
Staging will have to be designed with stresses of M-200 concrete but actual Construction shall be done in M-250.
-
-
-
These rates are including the cost of uplift pressure if any and entire dewatering during execution. Extra provision to be made for water logged area.
-
-
-
10. The rates indicated in the table are excluding the cost of pipes, special and valves required for inlet, outlet, washout overflow & bye pass arrangement .The scope of work, however includes cost of errcting, laying and jointing of pipes and valves including cost of jointing material upto 5M beyond outer face of outermost column.
-
-
-
11. For pipe diameters only upto 300mm, C.I. Pipes and C.I. Specials shall be used. For pipe diameters above 300mm M.S. pipes and M.S. specials (minimum 10mm thick) shall be used with proper anti-corrosive epoxy treatment from inside and outside.
-
-
-
12. Below mentioned rates are for foundation, with individuals footing withbearing capacity of 20 tonnes per square meter. for raft foundation,these rates shall be increased by 7.5 % where safe bearing capacity(SBC) is 5 MT. per sq.m. and by 5 % where SBC is more than 5 MT/ sqm and upto 10 Mt/sqm. This % of 5% or 7.5% is appllicable for estimation of amount of L.S. items ESR for extra item due to change from individual footing foundation to raft actual increase in concrete and steel quantities.
-
-
-
ESR -1 at Anumandal Office:- capacity 1180000 lit 25 M staging
1
-
-
ESR -2 at Data Nagar, capacity 600000 lit 22 M staging
1
-
-
ESR -3 at Block Office, capacity 6,80,000 lit 18 M staging
1
-
-
Providing and supplying ISI mark C.I. DF pipes excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loading into truck transport to stores, unloading etc.complete as directed by Engineer-in-charge.
-
-
-
For ESR-1, 2 & 3 (For Inlate, Washout, Overflow & Outlet)
-
-
-
100 mm dia.
83
-
-
200 mm dia.
122
-
-
250 mm dia.
70
-
-
350 mm dia.
52
-
-
400 mm dia.
31
-
-
Providing and supplying ISI standard CI flanged / S&S special including all taxes(central and loal) railway freight,insurance,unloading from railway wagan, loading into truck transport to departmental store/site unloading stacking etc. Complete ESR (1,2,3)
1500
-
-
Providing double flange sluice valve confirming for IS-2906/14846 including worn gear arrengements as per test pressure stainless steel spindle, caps including all taxes transportation complete. (Sluice and scour valve) with byepass arrangement PN- 1.6 with ED.
-
-
-
For ESR-1, 2, 3 & Distribution main.
-
-
-
100 mm dia.
14
-
-
150 mm dia.
6
-
-
200 mm dia.
9
-
-
250 mm dia.
5
-
-
300 mm dia.
3
-
-
350 mm dia.
9
-
-
400 mm dia.
3
-
-
AMR Bulk Meters
-
-
-
Providing, installing testing and commissioning of in line battery operated ultrasonic bulk type water meters ISO 4064 with built in data logger and GSM/GPRS modem for transfer of data communication to remote central computer as per working on following conditions and specifications. the meter shall be suitable for 50° C and provided with IP 68 protection class with complete immersion of water. The meter shall have battery life of min. 10 years should be able to detect the reverse flow volumn and tampering. the accuracy of the meter shall be +/- % of measured value including 36 months guarantee etc. complete.
-
-
-
For ESR-1, 2, 3 & Raw & clear water rising main.
-
-
-
200 mm dia.
1
-
-
250 mm dia.
1
-
-
300 mm dia.
5
-
-
Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand construction of R.C.C Intake well all complete job.
-
-
-
Earthwork in excavation of foundation trenches of toe wall, spillway, head regulator, outlet, intake well etc. as per designed section in all kind of soil including moorum soil, soil mixed with kankar, pebbles & boulders upto 300m size & disposal of the same ( beyond 50 m away from the edge of the trenches) with initial lead of 150 M & initial lift of 1.50M as per specification & direction of E/I.
-
-
-
Lift O to 1.50 M
1574.18
-
-
Lift 1.5 to 2.5 M
872.67
-
-
Lift 2.5 to 3.5 M
680.37
-
-
Earthwork in excavation of foundation trenches of toe wall, spillway, head regulator, outlet, intake well etc. as per designed section in hard rock where blasting is needed & stacking properly in approved stack size in approved stack yard ( beyond 50m from the edge of the trenches in the country side ) with initial lead of 150 m & initial lift of 1.50m as per specification & direction of E/I (Excavated hard rock size should not be more than 150 lb.)
-
-
-
Lift 2.50 to 3.50 M
65.01
-
-
Lift 3.50 to 4.50 M
630.64
-
-
Lift 4.50 to 5.50 M
514.77
-
-
Lift 5.50 to 6.50 M
431.31
-
-
Lift 6.50 to 7.50 M
360.84
-
-
Lift 7.50 to 8.50 M
296.66
-
-
Lift 8.50 to 9.50 M
238.76
-
-
Lift 9.50 to 10.50 M
187.14
-
-
Lift 10..50 to 11.50 M
138.16
-
-
Providing P.C.C. M-150 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing taxes and royalty all complete as per specification and direction of E/I.
213.23
-
-
Providing & laying PCC M - 100 with nominal mix of (1:3:6) in foundation with approved quality of stone metal grade -III (50 mm to 25 mm size ) clean coarse sand FM (2.5 to 3.0) washed and screened excluding cost of shuttering or form work as well as reinforcement, its cutting bending,binding and placing but including necessary tools & plants & vibrating,curing ,royalty all taxes etc.complete job as per specification & direction of E/I.
378.24
-
-
Providing & laying in situ cement concrete of trap/ granite/ quartzite/ gneisis metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, plywood form work, bully/steel propups, compaction, finishing and curing etc complete.(By weigh batching and mix design for M-250 and M-300 only. (excluding M.S. or Tor reinforcement. ) for RCC M- 300 for intake well.
27.45
-
-
Providing & casting in situ cement concrete of trap/ granite/ quartzite/ gneisis metal of approved quality for RCC work as per detailed drawings and designs as directed by Engineer-in-charge including normal dewatering, plywood form work, bully/steel prop-ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing etc complete.(By weigh batching and mix design for M-250 and M-300 only. Use of L and T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc cement is permitted.) (excluding M.S. or Tor reinforcement.) For RCC-M300 vertical wall
145.29
-
-
Providing tor steel reinforcement of 10 mm dia. As per approved design and drawing excluding carriage of MS rods to work site cutting, bending, and binding with annealed wire with cost of wire removal of rust, placing the rods in position all complete as per building specification & direction of E/I.
14.44
-
-
Providing 12 mm cement plaster (1:4 ) with clean coarse sand of F.M.1.5 including screening ,curing with all leads & lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.( for inside surface )
879.35
-
-
Providing fixing in position M.S. ladder 0.50 M wide consisting of 75X10mm M.S. flats as stringers and 16 mm dia. M.S. bar in double rows as steps placed at 25 cm c/c including cost of material and labour involved ,welding anchoring and applying three coats of anticorrosive paint etc. complete as directed by Engineer-in-charge.
21
-
-
Providing fixing in position C.I./ M.S. rose piece in intake wells including cost of all materials and labour, painting with three coats of anti-corrosive oil paint, etc. complete as directed by Engineer-in-charge.
632.7
-
-
Providing and fixing in position steel fiber reinforced concrete (S.F.R.C.) frame and covers of approved make including loading, unloading, transportation, all taxes, etc. complete as directed by Engineer-in-charge (20 tonnes capacity)
1
-
-
Providing, hoisting and fixing in position inverted 'J' type 100 mm dia. C.I. cowl type ventilators with mosquitoproof aluminium mesh at top including applying 2 coats of anti-corrosive paint, etc. complete as directed by Engineer-in-charge, weighting not less than 35 kg.
1
-
-
Dewatering the excavated trenches and pools of water by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour,fuel) etc. complete.
108000
-
-
Supplying equipment and labour for back filling the excavated earth around steining well all complete as per specification and direction of E/I.
52563.04
-
-
Providing, Constructing coffer dam in river basin/ dam storage as per type design including excavation, filling, the middle portion with B.C. soil (in gunny bags if required). Providing impervious/ semipervious materials on both side of B.C. soil (in gunny bags if required) including ramming, compacting to the satisfaction of Engineer-in-charge, till the completion of work including dismantling coffer dam after completion of work and disposing off the material as directed by the Engineer-in-charge.
6792.19
-
-
Connecting Pipe 700 mm DI including excatation refilling etc complete
60
-
-
Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand construction of R.C.C Jack well with Pump house all complete job.
-
-
-
Providing structural steel work in single stanchion composed of RSJ, channel etc. with caps, bases, mild steel plates, angles, brackets, cleats, gusset plates, anchor bplts etc. as per detailed design amd drawing or as directed by Engineer-in-charge.
-
-
-
500 x 180 mm
1.49
-
-
200 x 100 mm
0.38
-
-
100 x 110 mm x 12 mm
0.96
-
-
Labour for fabricating, erecting, hoisting & fixing in position structural steel work in RS joist, channel, angle, tee, flat, plate, latice member, built up compound section in column, girder, staircase, of truss including cost of gusset plates, holding down bolts, anchor plates at all height & depths, bolting welding (machining wherever necessary) with applying a priming coat of red lead paint all complete as per approved drawing building specification and direction of E/I.
2.84
-
-
Providing and fixing M.S.chequerred plate flooring of following thichness supported on M.S. angles ( 25 X 25 X 5mm size) including welding cutting and fabricating the plate of required square or rounding shape, making holes in the plate, including providing and applying 3 coats of anticorrosive paint etc. complete as directed by Enginneer in-charge.
-
-
-
8 mm thick. At Jack well
25.12
-
-
Providing & casting in situ cement concrete of trap/ granite/ quartzite/ gneisis metal of approved quality for RCC work as per detailed drawings and designs as directed by Engineer-in-charge including normal dewatering, plywood form work, bully/steel prop-ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing etc complete.(By weigh batching and mix design for M-250 and M-300 only. Use of L and T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc cement is permitted.) (excluding M.S. or Tor reinforcement.) for RCC-300 grade - all types of columns. Lift 0 to 3M for columns, Lift 3 to 6 M for columns.
3.32
-
-
Providing & casting in situ cement concrete of trap/ granite/ quartzite/ gneisis metal of approved quality for RCC work as per detailed drawings and designs as directed by Engineer-in-charge including normal dewatering, plywood form work, bully/steel prop-ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing etc complete.(By weigh batching and mix design for M-250 and M-300 only. Use of L and T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc cement is permitted.) (excluding M.S. or Tor reinforcement.) for RCC M-300 grade beams/braces/lintels, lift 3 to 6M for lintel.
12.94
-
-
Providing designation 75A brick work in CM 1:6 in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, costs of screening, materials, scaffolding, racking out joints to 15 mm depth curing, taxes and royalty all complete as per building specification & direction of E/I. up to 3 M, above 3M to 6M.
119.41
-
-
Supplying & fixing rolling shutters of approved make, made of required sixe M.S.laths interlocking together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside & outside locking with push & pull operation complete includeing cost of providing & fixing necessary 27.5 cm long wire springs grade No.2 & M.S. top cover of required thickness for rolling shutter.
-
-
-
80 X 1.25 mm M.S. lath with 1.25 mm thick top cover.
6.25
-
-
Supplying, fitting & fixing good quality, well dressed and well seasonal sal wood work in chaukhat in doors, windows, skylights, fan lights and C/W celetial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls & lintels all complete as per building specification & direction of E/I.
1.56
-
-
Supplying, fitting & fixing 38 mm thick good quality, well dressed & well seasoned sal wood fully paneled shutters in door & window with 25 mm, thick panels with one side plain & other side champhered with aluminium fittings such as hinges,sliding door bolts tower bolts, handles or rings, hooks & eyes cleats, sand blocks as per schedulle taxes and royalty all complete as per building specification & direction of E/I.
6.48
-
-
Providing 19 mm water proof cement plaster (1:3 ) with clean coarse sand of FM 1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I.( for exterior surface ) Lift upto 3M. and lift 3M to 6M.
209.22
-
-
Providing two coat of oil bound distemper of approved shade and make over old surface including washing, cleaning & preparing the walls, scaffolding, washing of floors & taxes all complete as per building specification & direction of E/I.
201.26
-
-
Provide two coat of snowcem of approved shade & make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding, curing & taxes all complete as per building specification & direction of E/I.
209.22
-
-
Supplying & laying (properly as per design and drawing ) rip-rap with good quality of boulders duly packed including the cost of materials, royalty all taxes etc.but excluding the cost of carriage all complete as per specification & direction of E/I.
45
-
-
Providing & fixing in position copper lightening conductor including copper rod of 20 mm dia as per upper terminal 1.5 M long with a knob at end & with conical spike at top, copper tape conductor 20 X 3 mm size, copper earth plate of 3 mm thick & 0.81 Sqm. In area, clamps at 1 M c/c including necessary excavation, laying & fixing the conductor, providing & fixing 40 mm G.I.pipe upto 3M height from ground & 0.5 M below ground including making all connections, filling the earthing pit with charcoal, salt etc. & refilling & watering etc. complete as per specification laid down in relevent I.S. codes.
-
-
-
for tape of 10 M length
1
-
-
Rebate/ Extra rate per Metre length or part there of over & above initial length of 10 M.
15
-
-
Providing and fixing GI pipe railing having 1.0 M height consisting 50x50x6 mm thick MS angles as verticals at 1.5 m c/c and additional posts at every corner with 3 rows of 25 mm dia GI pipes of medium class veriety as horizontal and painting 3 coats of oil paint over one coat of anticorrosive paint at approved colour and shade including cost of all labour, transporting bends to curved shape etc. complete
105.53
-
-
Supply, installation, testing and commisssioning of vertical turbine pumpsets with allied equipment as under
-
-
-
Vertical Turbine Pump (Water Luricated) Confirming to IS110/1989 (Reaffirmed 2009) 1500 RPM Suitale for Verical Hollow Shaft Squirrel Cage : Supply and delivery of Vertical water/oil lubricated statically, dynamically, hydraulically balanced turbie pump capable of discharging the following duty condition as given below due to all causes with surface discharge head confirming to IS 1710 and as amended as on date with accessories as per IS 5120/1977 (Reaffirmed 2011) and as amended thereafter to suit the site condition. The speed, No. of stages, sizes of column pipes and line shaft indicated is based on site condition prevailing during investigation. The pump should be supplied with non reversible ratched pin housing safety clutch, suction strainer etc. The pump bowl assembly shall be with bronze impeller running at 1450 RPM. The pump include suitable head shaft, suitable 1.5 m long SS line shaft required nos. to suit the well depth, Rubber line shaft bearing of required nos.,C.I Bearing retainer of required nos.,100 litre HDPE Pre-lubricating tank with 20mm PVC rigid pipe connection along with GM gate valves,Suitable ERW column pipe of each 1.5m long of required nos. to suit the well depth. Suction bell mouth of suitable size, M.S. clamps suitable for column pipe/line shaft - 2 set and spanner - 1 set etc complete.
-
-
-
Discharge - 6420 lpm and Head- 61 m (1W+1S); BHP:-150
2
-
-
Supplying Fully automatic star delta starter to operate induction motor working on 415v,3phase,50 hz with no volt coil, Over load element, ON-OFF push buttons, with necessary materials and connected to supply, etc complete starter with original sheet steel encloser
-
-
-
150 HP (300/150/150)
2
-
-
Servo Controlled Automatic Voltage Stabilizer: Supplying, installation, testing & commissioning of 150 KVA Servo Controlled Automatic Voltage stabiliser (Input 280 to 460 Volt) (make-: Servokon/V-Gaurd/Sen & Pandit) suitable for out put voltage of 415 Volt +/-1%,3 Ph, 50 Hz, with copper wound transformer (oil cooled). The stabilizer should be constructed in cubical box, with bidirectional wheels for easy handling, necessary monitors and user's controls on front panel such as indication, alarm, volt meter and selector switch for measuring input and out put voltage, Auto/Manual selector switch, Raise/Low push buttons etc. Protections and indications shall be incorporated with Over Voltage / Under Voltage, Single Phasing & Cut off contactor with electronic output sensing unit, including earthing, etc. all complete.
1
-
-
Change over switch: Supplying, erecting change over switch of 320 A suitable for 3 Phase, 415 Volt, 50 Hz.
1
-
-
Earthing: Earthing with copper earth plate including accessories and providing masanory enclosure with cover plate having locking arrangement and watering pipe of 2.7 m long etc. with charcoal / coke and salt as required conforming IS:3043 for each motors.
10
-
-
Crane: Providing, erecting triple spur gear type Chain Pulley Block suitable for 3 Tonne capacity as below with 3 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per IS 3832 carrying ISI mark, etc all complete as per site requirement & direction of E/I.
2
-
-
Cable: Power wiring with required 300 Sq mm 3.5 core 1.1KV grade armoured Aluminium Cables XLPE/PVC insulated cable from Transformer to Stablizer & Panel (MCP) including laying on wall or on floor as where required, jointing and making proper terminations,etc. all complete.
400
-
-
Cable: Power wiring with required 95 Sq mm 3 core 1.1KV grade armoured Copper cables XLPE/PVC insulated cable from Panel (MCP) to Motors & Staters including laying on wall or on floor as where required, jointing and making proper terminations,etc. all complete.
100
-
-
Transformer: Providing, erecting and commissioning out door type copper wound 160 KVA transformer (make- Kirloskar/CGL/BHEL/ Schneider/ABB ) continuously rated for 3 Ph, 50 Hz, at full load and temp. rise not exceeding 45º C by thermometer in oil and 50ºC by the resistance in winding after continuous run at full load rating, the transformer should have oil immersed winding having vector group DY 11, HT side connected in Delta and LT side connected in Star with neutral brought out connected to provided separate earthing. The transformer shall have power terminal arrangement, bushings / cable end box on HT side and cable end box on LT side. 2 Nos. channels with stoppers shall be provided and fixed on the provided plinth for mounting the transformer. The transformer should have following standard fittings. Transformer shall be of latest manufacturing standards as per amended IS specifications and the Load & No Load losses shall be limited to the values given below or as per IS or Norms issued by JSEB whichever are lower.
-
-
-
1) Oil conservator with filling hole with cap and plain oil level gauge.
-
-
-
2) Silica gel dehydrating breather charged with Silica Gel.
-
-
-
3) Oil drain valve.
-
-
-
4) Oil filter valve.
-
-
-
5) Lifting eyes / hooks.
-
-
-
6) Two earthing terminals
-
-
-
7) Diagram and rating plate.
-
-
-
8) Air Vent.
-
-
-
9) Explosion Vent.
-
-
-
10) 100 mm dia thermometer with thermometer pocket
-
-
-
11) Four bi directional plain roller.
-
-
-
160 KVA (11/.433 KV)
1
-
-
Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item A) and disposal of excavated earth so obtained to a distance upto 50 M including all lifts, levelling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/I.
3509.66
-
-
Providing and laying R.C.C. M-200 with nominal mix of (1:1.5:3) in foundation and plinth with approved quality of stone chips 20 mm to 6 mm size grdded and clean course sand F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, (but excluding the cost of reinforcement, taxes and royalty all complete as per building specification and direction of E/I.
251.42
-
-
Providing & casting in situ cement concrete of trap/ granite/ quartzite/ gneisis metal of approved quality for RCC work as per detailed drawings and designs as directed by Engineer-in-charge including normal dewatering, plywood form work, bully/steel prop-ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing etc complete.(By weigh batching and mix design for M-250 and M-300 only. Use of L and T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc cement is permitted) (excluding M.S. or Tor reinforcement.)
88.87
-
-
Providing Tor steel reinforcement of 10 mm, 12 mm, & 16 mm dia Bars as per approved design and drawing excluding carriage of M.S bars to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust, Placing the rods in position all complete as per building specification and direction of E/I. (TMT coil fe-500 only alid for sail, TATA steel, JSPL, Electro steel ltd. & izal steel)
33.49
-
-
Providing 1.5 mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I.
450.2
-
-
Manufacturing, providing and supplying spirally welded/ ERW/ SAW/ Fabricated M.S. pipes (Commercial quality) inclunding procurement of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming 'V' edge on both ends of pipes including railway freight, insurance, unloading from railway wagon, loading into truck, transport to stores, unloading, stacking, excluding GST levied by GOI & GOM in all respect etc. complete as per IS-3589 and IS-5504 as applicable as per specification (No negative tolerance in thickness is permissible) (200mm for casing)
50
-
-
Horizontal split casing centrifugal pump capable of discharging 550 LPM against a head of 3.0 m and mounted on common base plate, coupled with SPDP Eff1 induction motor, rating of motor 10 % more BHP than that of pump; operating on 3 Phase, 415 V, 50Hz with 1500 rpm pressure gauge, requested size of sluice valve, standard fitting etc.including construction of MS Suction and delivery header.
-
-
-
Discharge- 500 LPM and Head-3.0 m (1W +1S) (2.0 HP)
2
-
-
SA-1 Raw Water Pumping House
-
-
-
Ultrasonic level transmitter
-
-
-
Designing, Supplying, Installing, Commissioning & testing of Ultrasonic level transmitter CE marked with following technical parameters at Raw Water Pump House and Interfacing with PLC panel including mounting arrangement.
-
-
-
Range- 0-30 mtrs
-
-
-
Output- 4 - 20 mA
-
-
-
Power supply -24 V DC ext.
-
-
-
Display - Large LCD
-
-
-
Accuracy- +/- 0.25 % of Full scale or better
-
-
-
Temp.- With Inbuilt temp compensation
-
-
-
Enclosure- IP 65
-
-
-
Mounting- Top/ above FSL of tank/ jack well
1
-
-
Pressure Transmitter
-
-
-
Designing, Supplying, Installing, commissioning & testing of pressure transmitter CE markd with following technical parameters at Raw Water Pump House and Interfacing with PLC panel including mounting arrangement.
-
-
-
Output- 4 - 20 mA
-
-
-
Power supply -24 V DC ext.
-
-
-
Display - 4" LCD
-
-
-
Accuracy- +/- 0.1 % of Full scale or better
-
-
-
Enclosure- IP 67
2
-
-
Power Analyser
-
-
-
Designing, Supplying, Installing, commissioning & testing of Power Analyser interfacing to PLC Panel with modbus communicatuion port , as per IEC 62053 and in the prescribed format including mounting arrangement.
1
-
-
PLC Panel
-
-
-
Designing, Supplying, Installing, commissioning & testing of PLC Panel. Including PLC with CPU & Power supply unit, power supplyb cables interfacing cards, interfacing cables, wireless modules with 25% extra quantity of all accessories.
2
-
-
PLC based control monitoring and communication software
-
-
-
Designing, Supplying, Installing, commissioning & testing of PLC based control monitoring and communication software as per IEC 61131 at Raw water Jackwell / Sump suitable for monitoring and control of Raw water Pumps, Pressure Transmitters, Level Transmitter, Flow Transmitter complete.
1
-
-
Power Cable
-
-
-
Designing, Supplying, Installing, commissioning & testing with Terminating & Interfacing of 2 C x 1.5 sq.mm as per IS 694 twisted shielded copper armoured conductor on wall in GI tray or in ground suitable for supplied D. C. Voltage.
30
-
-
Communcation Cable
-
-
-
Designing, Supplying, Installing, Commissioning & testing with Terminating and interfacing of CAT 6 as per ISO/IEC -11801 std. cable for networking on wall in GI tray or in ground required Ethernet communication.
60
-
-
Signal cable
-
-
-
Designing, Supplying, Installing, commissioning & testing with Terminating & Interfacing of 2 pair x 1.0 sq.mm. as per IS 694 copper shieled, twisted, multistraned armoured cable on wall in GI tray or on ground.
30
-
-
Designing, Supplying, Installing, commissioning & testing with Terminating & Interfacing of 3 pair x 1.0 sq.mm. as per IS 694 copper shieled, twisted, multistraned armoured cable on wall in GI tray or on ground.
30
-
-
Designing, Supplying, Installing, commissioning & testing with Terminating & Interfacing of 4.5 pair x 1.0 sq.mm. as per IS 694 copper shieled, twisted, multistraned armoured cable on wall in GI tray or on ground.
30
-
-
Designing, Supplying, Installing, commissioning & testing with Terminating & Interfacing of 8 pair x 1.0 sq.mm. as per IS 694 copper shieled, twisted, multistraned armoured cable on wall in GI tray or on ground.
30
-
-
Cable Trays
-
-
-
Designing, Supplying, Installing Bending, Cutting Perforated GI tray 80 x 20 mm x3 mm thk for laying of cable etc.
300
-
-
Designing, Supplying, Installing, Bending, Cutting
Perforated GI tray 200 x 20 x 3mm thk for for laying of cable etc.
90
-
-
Surveillance System
-
-
-
Designing, Supplying, Installing, Commissioning & testing of CCTV IR water proof camera suitable for upto 100 ft. with IR Dome camera, control key board, DVR, Hard Disk, cables, Upt transreceivers etc. complete.
4
-
-
SA-2 Water Treatment Plant
-
-
-
Aeration Fountain
-
-
-
Open channel type ultasonic flowmeter with FIT.
-
-
-
Design, Supply, Installation, Testing of open channel type ultrasonic flowmeter.
-
-
-
Ultrasonic level transmitter CE maked with following technical parameters at Raw Water Pump House and Interfacing with PLC panel including mounting arrangement.
-
-
-
Range- 0-5 mtrs
-
-
-
Output- 4-20 mA
-
-
-
Power Supply - 24 V DC ext.
-
-
-
Display- 4" LCD
-
-
-
Accuracy - +/- 0.25% of Full scale or better
-
-
-
Enclosure - IP 68
1
-
-
PH Analyser
-
-
-
Design, Supply, Installation, Testing of pH analyser as per IUPAC( International Union for Pure & Applied Chemistry)at A.F. and Interfacing with PLC panel including mounting arrangement.
-
-
-
Range: 0-14
-
-
-
pH Accuracy : Better than 0.1% of full scale
-
-
-
Supply voltage: 24 V dc.
-
-
-
Output: 4-20 mA
-
-
-
As per IEC 61000-6-2 & IEC 61000-6-3
2
-
-
Turbidity Meter
-
-
-
Design, Supply, Installation, commissioning, testing of Turbidity Anayser as per ISO 7027 scattering light method at A.F. and Interfacing with PLC panel. Turbidity analyser shall comprises of 3 components i.e. sensors,signal distributor and transmitter with indicator. with 2 Outputs, 1 to PLC & anather to Local Display with mounting arrangement.
-
-
-
Overall Range : 0-2000 NTU
-
-
-
Accuracy : +/- 0.02 NTU
-
-
-
Supply Voltage: 230 V ac
-
-
-
Output : 4-20 mA
1
-
-
Alum Dosing
-
-
-
Design, Supply, Installing commissioning and testing PLC compatible Alum/PAC Mixing, Dosing and monitoring system for Dosing at raw water channel by applying suitable mechanism to control the available turbidity in desired limit. This system includes level switches for tank.
1
-
-
Ultrasonic Level Transmitter
-
-
-
Designing, Supplying, Installing, Commissioning & testing of Ultrasonic level transmitter CE marked at each filter bed with following technical parameters with PLC panel including mounting arrangement.
-
-
-
Range- 0-5 mtrs
-
-
-
Output- 4-20 mA
-
-
-
Power Supply- 24 V Dc ext.
-
-
-
Display- 4" LCD
-
-
-
Accuracy- +/- 0.25 of full scale or better
-
-
-
Enclosure- IP 65
6
-
-
Power Analyser
-
-
-
Designing, Supplying, Installing, commissioning & testing of Power Analyser interfacing to PLC Panel with modbus communicatuion port , as per IEC 62053 and in the prescribed format including mounting arrangement.
2
-
-
PLC Panel with HMI for Filter Bed
-
-
-
Designing, Supplying, Installing, commissioning & testing of PLC Panel with HMI including PLC with CPU & Power supply unit, power supply cable, Interfacing cards, interfacing cables, wireless modules with 25 % extra quantity of all accessories.
1
-
-
Master PLC Panel
-
-
-
Design, Supply, Installing, Commissioning & Testing of Master PLC control monitoring and communication panel as per IEC 61131 at Pure Water Sump suitable for monitoring and control of pure water Pumps. Pressure Transmitters, Level Transmitter, PH Transmitter, Turbidity Transmitter, for all pumps installed.
1
-
-
Control Cable
-
-
-
Designing, Supplying, Installing, commissioning & testing with Terminating & Interfacing of 2 C x 1.5 sq.mm as per IS 694 twisted shielded copper armoured conductor on wall in GI tray or in ground suitable for supplied DC Voltage
30
-
-
Signal Cables
-
-
-
Designing, Supplying, Installing, commissioning & testing with Terminating & Interfacing of 2 pair x 1.0 sq.mm. as per IS 694 copper shieled, twisted, multistraned armoured cable on wall in GI tray or on ground.
30
-
-
Supplying, Installing, commissioning & testing with Terminating & Interfacing of 3 pair x 1.0 sq.mm. as per IS 694 copper shieled, twisted, multistraned armoured cable on wall in GI tray or on ground.
30
-
-
Supplying, Installing, commissioning & testing with Terminating & Interfacing of 4.5 pair x 1.0 sq.mm. as per IS 694 copper shieled, twisted, multistraned armoured cable on wall in GI tray or on ground.
30
-
-
Supplying, Installing, commissioning & testing with Terminating & Interfacing of 8 pair x 1.0 sq.mm. as per IS 694 copper shieled, twisted, multistraned armoured cable on wall in GI tray or on ground.
30
-
-
Blower
-
-
-
Pressure Transmitter for Blower
-
-
-
Designing, Supplying, Installing, Commissioning & testing of pressure transmitter CE marked with following technical parameters at Blower delivery and Interfacing with PLC panel.
-
-
-
Medium- Water
-
-
-
Pressure- 0-10 kg/cm²
-
-
-
Output 4-20 mA
-
-
-
Power Supply- 24 V DC ext.
-
-
-
Display- Large LCD
-
-
-
Accuracy- +/- 0.5% of full scale
-
-
-
Temp.- suitable for Amb. Temp
-
-
-
Enclosure- IP 65 weatherproof
-
-
-
Mounting- In Line
1
-
-
Priming Arrangement
-
-
-
Designing, Supplying, Installation, Commissioning & testing with complete priming arrangement for centrifugal pump as applicable & as required shall be done with interface with PLC panels & Further to SCADA system.
1
-
-
SA-3 Flash Mixer & Clariflocculator
-
-
-
Designing, Supplying, Installing, Commissioning & testing with operation of Flash Mixer and Clarifloculator mechanism, starter, cables etc for above to be interfaced with SCADA system.
1
-
-
SA-4 Valve Actuator
-
-
-
Providing, erecting electrical valve actuators totally enclosed, weather-proof and dust proof construction with IP-67, protection class suitable for installation in any position without lubrication, leakage or other operational difficulty with special grease filled gear box and hand wheel for emergency manual operation which will automatically dis-engage on restoration of power to motor and with 10 watt single phase space heater and continuous local mechanical position indicator and individually replaceable counter gear assembly & with two torque and four limit switches with S.S. flap and operated with gear driven cams and of rating 250 Volt, 5 Amp, AC/DC, torque switch dial and with TEFC squirrel cage induction motor working on 440 Volts +/- 10% 3 phase, 50 Hz AC of intermittent duty rating S-2 insulation class "F" and temp rise restricted to class "B" with IP-67 protection class suitable for DOL starting load margin. The torque rating of reduction gear box shall be atleast 1.5 times max. toeque required for opening & closing of valve.
-
-
-
Electric valve Actuator for non rising spindle type sluice valve, PN-1 & PN 1.6 rating
-
-
-
For valve Size (Without integral starter)
-
-
-
200 mm dia.
4
-
-
250 mm dia.
4
-
-
350 mm dia.
4
-
-
400 mm dia.
4
-
-
SA-5 Pure Water Pumping Machinery
-
-
-
Turbidity Meter / Analyser
-
-
-
Design, Supply, Installation, Commissioning & Testing of Turbidity Analyser as per ISO 7027 scattering light method at A.F. and Interfacing with PLC panel. Turbidity Analyser shall comprises of 3 components i.e. sensors,signal distributor and transmitter with indicator with 2 outputs, 1 to PLC & another to local display including Mounting arrangement.
-
-
-
Overall Range : 0-100 NTU
-
-
-
Accuracy : +/- 0.02 NTU
-
-
-
Supply Voltage: 230 V ac
-
-
-
Output : 4-20 mA
1
-
-
Residual chlorine analyser / Meter
-
-
-
Design, Supply, Installation, Testing of Residual chlorine analyser / meter must have automatic sensor cleaning facility at pure water sump and interfacing with PLC panel.
-
-
-
Residual Chlorine meter shall comprises of 3 components i.e. sensors, flow through assembly and transmitter with indicator and gives 2 outputs one to Local display & other to PLC including Mounting arrangement.
-
-
-
Overall range : 0-8 mg/l (ppm)
-
-
-
Accuracy : 2% of full scale
-
-
-
Supply voltage : 230 V ac
-
-
-
Output: 4-20 mA
-
-
-
Membrane free sennsor of 2 gold plated electrode for long term stability and reference electrode (ag/ Agcl) must be provided to avoid maintenance. IP 65 nema 4 housing protection class required.
1
-
-
PLC based control monitoring and communication software
-
-
-
Design, Supply, Installing, Testing, PLC based control monitoring and communication panel as per IEC 61131 at Pure Water Sump suitable for monitoring and control of pure water Pumps. Pressuer transmitters, Level transmitter, PH transmitter, residual chlorine analyser, for all pumps installed.
1
-
-
SA-6 SCADA Software
-
-
-
Supply, Installation, Commissioning, Testing, Terminating & Interfacing Software Design to PLC and commissioning of SCADA software with required hard tags plus 25% extra and with unlimited soft Tags & life time licence Development version
1
-
-
Developing/ Programming charges to install the software as per logic define by the dept.
1
-
-
Supply, Installation, Testing, Terminating & Interfacing Centralised Historian Server grade Historian PC with Window 7 or latest window operating system & Historian software development cost etc. complete
1
-
-
Supply, Installation, Testing, terminating & Interfacing Secondary Computer station etc.
1
-
-
Supply, Installation, Testing, Integration & Commissioning of 46" LCD monitor at Conf. Room for display of total water system (Online).
1
-
-
Supply, Installation & Commissioning of Split Airconditioner of capacity 2T for Central control room at WTP etc
1
-
-
SA-7 MBR/GSR/ESR
-
-
-
PLC Panel suitable for Wireless communication
-
-
-
Designing.supplying, Installing commissioning & testing of following equipments with satisfactory test and trial of PLC Panel control, monitoring and communication system along with PLC Panel at Central monitoring system.
3
-
-
Solar Panel with Battery
-
-
-
Designing,Supplying,installing commissioning & testing of photovoltaic solar panel with its charger, MS Stand for mounting solar panel so as to have maximum exposure of sunlight for desired location and maintenance free battery wit 3 days battery backup.
3
-
-
Suply, installation, testing and commisssioning of horizontal casing centrifugal pumpsets with alied equipment as
-
-
-
Horizontal Split Casing Centrifugal Pump -: Supply, delivery at site with necessary packing, receiving, unloading, shifting, storing, installation, testing and commissioning of Horizontal Centrifugal Split Casting pumps with motor, CI casing and casing ring, SS 316 impeller, SS 410 Shaft and shaft sleeve, coupling guard, common base plate, foundation bolts etc. complete with all respect as per the specification.
-
-
-
For ESR at Anumandal -: Discharge- 51.74 Lps and Head- 38 m (1W+1S), BHP:- 55 HP
2
-
-
For ESR at Data Nagar -: Discharge- 26.01 Lps and Head- 40 m (1W+1S), BHP:- 30 HP
2
-
-
For ESR at Irrigation colony-: Discharge- 29.72 Lps and Head- 29 m (1W+1S) BHP:- 30 HP
2
-
-
Starter: Supplying, installation, testing & commissioning of assembled Fully Automatic Star Delta starter, in a provided cubical panel to operate induction motor with no volt coil, over load relay and ON/OFF push buttons, with necessary material and connected to supply, etc complete. (make :-L&T/Jyoti/ Siemens/ Schnieder.)
-
-
-
a) 75 HP
2
-
-
b) 35 HP
4
-
-
Servo Controlled Automatic Voltage Stabilizer: Supplying, installation, testing & commissioning of 250 KVA Servo Controlled Automatic Voltage stabiliser (Input 280 to 460 Volt) (make-: Servokon/V-Gaurd/Sen & Pandit) suitable for out put voltage of 415 Volt +/-1%,3 Ph, 50 Hz, with copper wound transformer (oil cooled). The stabilizer should be constructed in cubical box, with bidirectional wheels for easy handling, necessary monitors and user's controls on front panel such as indication, alarm, volt meter and selector switch for measuring input and out put voltage, Auto/Manual selector switch, Raise/Low push buttons etc. Protections and indications shall be incorporated with Over Voltage / Under Voltage, Single Phasing & Cut off contactor with electronic output sensing unit, including earthing, etc. all complete.
1
-
-
Change over switch: Supplying, erecting change over switch 400A suitable for 3 Phase, 415 Volt, 50 Hz.
1
-
-
Cable: Power wiring with required size in Sq mm, 3 core, 1.1KV grade unarmoured Copper cables XLPE/PVC insulated cable from Panel (MCP) to Motors & Staters including laying on wall or on floor as where required, jointing and making proper terminations,etc. all complete.
-
-
-
a) 35 Sq mm
100
-
-
b) 16 Sq mm
200
-
-
Transformer: Providing, erecting and commissioning out door type copper wound 250 KVA transformer (make- Kirloskar/CGL/BHEL/ Schneider/ABB) continuously rated for 3 Ph, 50 Hz, at full load and temp. rise not exceeding 45º C by thermometer in oil and 50ºC by the resistance in winding after continuous run at full load rating,the transformer should have oil immersed winding having vector group DY 11, HT side connected in Delta and LT side connected in Star with neutral brought out connected to provided separate earthing. The transformer shall have power terminal arrangement, bushings / cable end box on HT side and cable end box on LT side. 2 Nos. channels with stoppers shall be provided and fixed on the provided plinth for mounting the transformer. The transformer should have following standard fittings. Transformer shall be of latest manufacturing standards as per amended IS specifications and the Load & No Load losses shall be limited to the values given below or as per IS or Norms issued by JSEB whichever are lower.
-
-
-
1) Oil conservator with filling hole with cap and plain oil level gauge.
-
-
-
2) Silica gel dehydrating breather charged with Silica Gel.
-
-
-
3) Oil drain valve.
-
-
-
4) Oil filter valve.
-
-
-
5) Lifting eyes / hooks.
-
-
-
6) Two earthing terminals.
-
-
-
7) Diagram and rating plate.
-
-
-
8) Air Vent.
-
-
-
9) Explosion Vent.
-
-
-
10) 100 mm dia thermometer with thermometer pocket
-
-
-
11) Four bi directional plain roller.
-
-
-
250 KVA (11/.433 KV)
1
-
-
Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand Laying of Raw & clear water Rising Main
-
-
-
Providing and supplying ISI mark centrifugally cast (spun) ductile Iron pipes of 100 mm and above all diameter for water works with sockets and spigot ends confirming to IS 8329/2000 in standared working lengths of 4.5,5.5,and 6.0 M for classification K-9 suitable for push on joints (rubber gasket D jointing) with cement mortar lining inside the pipes with outsides zinc and bituminious coating rate are ex-factory excluding transportation, taxes and duties contractor profit and over head charges etc.
-
-
-
Raw water rising main from IW to WTP 350mm DI K-9
6946.2
-
-
Pure Water Rising Main 250mm DI K-9 from WTP to ESR-1 Near WTP
1662.6
-
-
Pure Water Rising Main 200mm DI K-9 from WTP to ESR-2 at Data nagar
3549.6
-
-
Pure Water Rising Main 200mm DI K-9 from WTP to ESR-3 at Block Office
3462.9
-
-
Providing and supplying D.I. specials and fitting with sealing rubber gasket of SBR complete withcast iron follower gland and M.S nutbolt coated or otherwise protected from rusting and suitable for DI pipes includingcost of labour, materials, and transportation to stores/ site, loading and unloading including all taxes etc. complete as per IS-9523.
54887.31
-
-
Providing and supplying ISI mark CI D/F reflux valves (non-return valves) of following dia. Including all taxes (Central and Local), railway freight, inspection charges unloading from railway wagon, loading into truck, transportation upto departmental stores/ site, unloading, staking etc. complete. Reflux valves as per I.S. 5312 Part I(1984).
-
-
-
350mm dia (with bypass arangement PN 1.6 )
1
-
-
300mm dia (with bypass arangement PN 1.6 )
1
-
-
250mm dia (with bypass arangement PN 1.6 )
1
-
-
200mm dia (with bypass arangement PN 1.6 )
1
-
-
Supplying double flanged sluice valve confirming for IS 2906/14846 including warn gear arrengements as per test pressure stainless steel splindle /caps etc. complete.
-
-
-
(Sluice and scour valve)
-
-
-
350mm dia
1
-
-
300mm dia
1
-
-
250mm dia
1
-
-
200mm dia
1
-
-
Providing, supplying, Kinetic double orifice type Air valve as per MJPs standard specification combined with screw down isolating valve, small elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face drilled including al taxes, insurance, third party inspection charges, loading, unloading, transportation to site etc. complete including cost of all materials, hudraulic testing etc.PN - 1.6 Kinetic.
-
-
-
80 mm dia.
29
-
-
Earthwork in excavation (as per I.S. 3114/1965 for laying of different type and sizes of pipe so as to give one meter avarage cover over the socket of pipes with disposal of excavated with in initial lead and lift as per specification and direction of engineer-in charge.
-
-
-
Excavation in soil item-A
24339.18
-
-
Excavation in soil item-B
19420.34
-
-
Supplying labours, tools and tackles, lubricant etc. for laying and jointing C.I.S/S tyton pipes (class LA) trenches supplying rubber gasket (Rubber gasket confirming to I.S.S.-5382-1969) and making gasket joint including providing night guard, barrier and red light to safe guard against accident, all complete (Pipe to be supplied departmentally free of cost and laying of pipes is to be done as per I.S.S. 3114-1985) as per design, specification and direction of E/I.
-
-
-
200mm dia DI K-9
3480
-
-
250mm dia DI K-9
3395
-
-
300mm dia DI K-9
1630
-
-
350mm dia DI K-9
6810
-
-
Labour charge for one cutting of cost iron pipe and specials including supplying, necessary tools and plants, chipping or filling the surface as per specification and direction of E/I.
-
-
-
200mm dia DI K-9
14
-
-
250mm dia DI K-9
2
-
-
300mm dia DI K-9
15
-
-
350mm dia DI K-9
10
-
-
Supplying labours, tools and tackles for testing of laid CI pressure pipe upto 60m head of water all complete as per specification and direction of E/I. (Water to be supplied free of cost departmently)
-
-
-
200mm dia DI K-9
3480
-
-
250mm dia DI K-9
3395
-
-
300 mm dia DI K-9
1630
-
-
350mm dia DI K-9
6810
-
-
Supplying labour and tools for fixing C.I. sluice valve in trenches with pair of C.I. Tail piece including making laed caulked joints and flanged joint as per I.S.S. specification including supplying all jointing material (pig lead confirming to I.S.S 782-1978, yarn confirming to I.S.S. 6587-1972 and nuts and bolt confirming to I.S.S. 1364-1983) including drilling holes in flanges if required as per specification and direction of E/I.
-
-
-
200mm dia DI K-9
2
-
-
250mm dia DI K-9
2
-
-
300 mm dia DI K-9
2
-
-
350mm dia DI K-9
2
-
-
Lowering & laying and fixing in proper alignment and position all types of CI air valve as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all materia and giving satisfactory hydraulic testing etc. complete. (for all class of valves)
-
-
-
80mm dia
29
-
-
Providing and constructing B.B. masonary valve chamber with 15mm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B masonery in CM 1:5 proportion precast RCC frame & cover, etc. complete as per directed by Engineer-in-charge.Wall thickness : 0.23 M for depth of 1.20M and 0.35 M for balance depth exceeding 1.20 M.
76
-
-
i) 1.20 x 0.9 m, depth 1.50M with cover.
-
-
-
ii) Sluice valve and air valve 29 + 6 = 35
-
-
-
Providing P.C.C. M-150 with nominal mix of (1:3:6) in foundation with approved quality stone metal (20 mm to 6 mm Size) clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of Engineer -in charge
-
-
-
A) Thrust Block
-
-
-
Thrust block for 200 mm Dia. DI K-9 Pipe
14
-
-
Thrust block for 250 mm Dia. DI K-9 Pipe
1
-
-
Thrust block for300 mm Dia. DI K-9 Pipe
15
-
-
Thrust block for 350 mm Dia. DI K-9 Pipe
10
-
-
Providing Course Clean Sand in Filling In Foundation Trenchesor in plinth including ramming and watering in layers not exceeding 150mm thick with all leads & lifts all complted as per bulding specification & direction of E/I
983.23
-
-
Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand Providing all labour, materials, equipment to procure and laying of DI class K-7 pipes with Cement Mortar Lining for distribution main
-
-
-
Providing and supplying ISI mark centrifugally cast (spun) ductile Iron pipes of 100 mm and above all diameter for water works with sockets and spigot ends confirming to IS 8329/2000 in standared working lengths of 4.5,5.5,and 6.0 M for classification K-7 and K-9 suitable for push on joints (rubber gasket D jointing) with cement mortar lining inside the pipes with outsides zinc and bituminious coating rate are ex-factory excluding transportation,taxes and duties contractor profit and over head charges etc. (Including cost of one No. gasket for each pipe)
-
-
-
100mm dia. DI K-7
39677
-
-
150mm dia. DI K-7
3581
-
-
200mm dia. DI K-7
3319
-
-
250mm dia DI K-7
2999
-
-
300mm dia. DI K-7
2024
-
-
350mm dia. DI K-7
1327
-
-
400mm dia. DI K-7
380
-
-
Providing and supplying D.I. specials and fitting with sealing rubber gasket of SBR complete withcast iron follower gland and MS nutbolt coated or otherwise protected from rusting and suitable for DI pipes includingcost of labour, materials, and transportation to stores/ site, loading and unloading including all taxes etc. complete as per IS-9523..
63449.63
-
-
Earthwork in excavation of cut-off trenches by the hydraulic excavator as per designed section in soft rock (Where blasting is not needed) (vide type of soil item -C) with disposal of soil beyond 1/2 km from centre of trench but upto 1km with all lifts by tipper including construction and maintenance of haul road all complete as per specification & direction of E/I .
4973.45
-
-
Lowering, laying and jointing with SBR rubber gaskets DI pipes of various classes with CI/MS specials of following diameter in proper position, grade and alignment as directed by Engineer in Charge including conveyance of material from store to site of work including cost of jointing materials and rubber rings, labour,hydraulic testing etc. complete
-
-
-
100mm dia. DI K-7
39677
-
-
150mm dia. DI K-7
3581
-
-
200mm dia. DI K-7
3319
-
-
250mm dia DI K-7
2999
-
-
300mm dia. DI K-7
2024
-
-
350mm dia. DI K-7
1327
-
-
400mm dia. DI K-7
380
-
-
Supplying labours, tools and tackles for testing of laid CI pressure pipe upto 60m head of water all complete as per specification and direction of E/I.
-
-
-
100mm dia. DI K-7
39677
-
-
150mm dia. DI K-7
3581
-
-
200mm dia. DI K-7
3319
-
-
250mm dia DI K-7
2999
-
-
300mm dia. DI K-7
2024
-
-
350mm dia. DI K-7
1327
-
-
Supplying labour and tools for fixing C.I. sluice valve in trenches with pair of C.I. Tail piece including making laed caulked joints and flanged joint as per I.S.S. specification including supplying all jointing material (pig lead confirming to I.S.S 782-1978, yarn confirming to I.S.S. 6587-1972 and nuts and bolt confirming to I.S.S. 1364-1983) including drilling holes in flanges if required as per specification and direction of E/I.
-
-
-
100 mm dia DI K-7
14
-
-
150 mm dia DI K-7
6
-
-
200 mm dia DI K-7
7
-
-
250 mm dia DI K-7
4
-
-
300 mm dia DI K-7
3
-
-
350 mm dia DI K-7
7
-
-
Cutting the road as well as restoring the same as per specifications and as directed by Engineer incharge
-
-
-
Pucca Road(Except black top only taken out material to be used)
5297.85
-
-
Waterbound Macadam road(taken out material will be used) for cutting as per requirement of the restoring work
2648.93
-
-
Dismantaling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15 meter lead and disposal of unservisible materials with all leads complete as per direction of E/I
132.45
-
-
Providing designation 75 A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.
796.13
-
-
Providing designation 75 A brick work in C.M. (1:6) in foundation & plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening materials, raking out joints to 15 mm depth, curing, taxes & royalty all complete as per building specification & direction of E/I
406.16
-
-
Filling in foundation trenches & plinth in layers not exceeding 150 mm. thick well watered, rammed, fully compacted & fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M & lift of 1.5 M all complete as per building specification & direction of E/I.
62.1
-
-
Providing 25 mm thick damp proof course with cement concrete M - 150 with norminal mix of (1:2:4) with approved quality of stone chips of 20 mm to 6 mm size graded and clean coarse sand of F M 2.5 to 3 including screening , shuttering , and mixing cement concrete in mixer with 5% cico or any other approved water proffing compound and placing in position striking , curing , taxes and royalty all complete , as per building specification and direction of E/I.
419.8
-
-
Providing R.C.C.M - 150 with nominal mix of (1:2:4) in beams & lintel with approved quality of stone ships 20 mm to 6 mm. size graded & clean coarse sand of F.M. 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer & placing in position vibrating, striking, curing (but excluding the cost of reinforcement), taxes & royalty all complete, as per building specification and direction of E/I.
10.84
-
-
Providing average 63 mm thick R.C.C.M-150 with nominal mix of (1:2:4) chajja with approved quality of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M. 2.5 to 3 including making drip course in concrete, screening ,centering, shuttering & mixing cement concrete in mixer & placing in position vibrating, striking, 6 mm cement plaster (1:4) in ceiling & sides of chajja with and of F.M. 1.5, curing all complete as per building specification of E/I.
12.58
-
-
Providing R.C.C. M-200 with nominal mix of (1:1:5:3) in roof slab with approved quality of stone ships 20 mm to 6 mm size Graded & clean coarse sand of FM 2.5 to 3 including screening,centering, shuttering ,mixing cement concrete in mixer & placing in position, vibrating, striking, curing all complete as per building specification & direction of the E/I.
17.36
-
-
Supplying fitting and fixing 250 x 20 x 6 mm L-type M.S. Clamp properly fish tailed, including making holes and setting the same in 375 x 125 x75 mm cement concrete block (1:2:4) with cost of all labour and materials and taxes as per building specification and direction of E/I .
184
-
-
Supplying fitting & fixing 38 mm thick good quality well dressed and well seasoned Sal wood battened shutter ledged & braced in doors and windows with oxidized iron fitting such as hinges, sliding door bolts, tower bolts, handles or rings, hooks and eyes, cleats, sand block as per schedule, taxes & royalty all complete as per building specification & direction of Engineer–in-Charge
63.18
-
-
Supplying, fitting & fixing M.S. Grill made of 20 x 6 mm M.S. Flat as per approved design & drawing properly fabricated with Joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per the building specification and direction of E/I.
964.8
-
-
Providing 25 mm thick precast R.C.C. M-150 with nominal mix of (1:2:4) jali with approved quality of stone chips of 6 mm nominal size and clean coarse sand of FM 2.5 to 3 with 1.6 mm thick M.S.wire as per approved design and drawing and placing the same in position true to plumb and level and properly grouted with cement mortar (1:3) including cost of curing, scaffolding and finishing all complete asper building specification and direction of E/I.
2.16
-
-
Providing and fixing fan hook of 16 mm dia M.S. bar 1 meter long bent to required size and shape, placed in position and fixing in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/I.
12
-
-
Supplying, fitting and fixing M.S.grill gate with M.S. grills made of 20 x 6 mm M.S. flats or 16 mm .M.S. square bars fitted on 25x25x6mm. M.S.Angle frame of size 60 x 60 x 6 mm. including cost offabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size, applying priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.
555.66
-
-
Providing 6 mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads & lifts of water, scaffolding, all complete as per building specification & direction of E/I.
111.88
-
-
Providing 12 mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, Curing with all leads & lifts of water, scaffolding, all complete as per building specification & direction of E/I.
3662.43
-
-
Providing 12 mm. cement plaster (1:3) with clean coarse sand of F.M. 1.5 and 1.5mm cement punning including screening, curing complete as per building specification & direction of E/I.
528.76
-
-
Providing average 115mm. thick lime terracing (24 lime :36 surkhi:100 brick khoa) well beaten and compacted including maintaining proper level & slope, making ghundi with finishing treatment, all complete as per building specification & direction of E/I.
134.82
-
-
Providing average 150 mm thick dry rammed khoa beaten to 112 mm. (compacted with water) made of well burnt or jhama bricks including ramming properly till compacted thickness is achieved, curing & carriage of water with all leads, making proper slope & blending the top with cement mortar (1:10) all complete as per building specification & direction of E/I.
-
-
-
Polished Kotah
113.38
-
-
Providing 25 mm thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layer 19 mm thick (1:2:4) with 12 mm to 6 mm size graded stone chips and top layer 6 mm thick (1:2) with 6 mm down stone chips, in panels including cost of curing , finishing the surface smooth by rubbing with carborandum stone, all complete as per building specification & direction of E/I.
-
-
-
Rough Shahabad
56.8
-
-
White washing three coats over new surface with approved quality of lime including cost of cleaning surface thoroughly and removing the scales of smoke and mosh marks with jhama rubbing, scaffolding, washing, of floors and all complete as per building specification and direction of E/I.
106.12
-
-
Colour washing two coats over a coat of white wash over new surface with approved quality of lime including cost of cleaning surface thoroughly and removing the scales of smoke & mosh marks with jhama rubbing, scaffolding, washing, of floor and all complete as per building specification and direction of E/I.
3662.43
-
-
Providing two coats of painting with ready mixed paint over a coat of primer of approved shade and make over new wooden surface includ n g preparing the surface after cleaning, removing dirt, scales, smokes, grease and sand papering, including cost of scaffolding and all complete as per building specification & direction of E/I.
168.36
-
-
Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales, smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I.
17.64
-
-
Providing two coats of painting with ready mixed paint of approved shade & make over steel surface including cleaning the surface thoroughly, scaffolding & all complete as per building specification & direction of E/I.
528.76
-
-
Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authority Construction of Compound wall. etc. all complete job.
-
-
-
Providing designation 75 A brick work in CM (1:4) in super structure with approved quality of clean coarse sand of FM 2 to 2.5 including, providing 10mm thick mortar joints cost of screening materials, raking out joints to 15mm depth curing, and all complete as per building specification and direction of E/I.
322.88
-
-
Providing R.C.C M - 150 with nominal mix of (1:2:4) in band at lintal level with approved quality of stone chips 20 mm to 6mm size graded and clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing and all complete as per building specification and direction of E/I.
15.53
-
-
Providing R.C.C M - 150 with nominal mix of (1:2:4) in stiffners with approved quality of stone chips 20 mm to 6mm size graded and clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing and all complete as per building specification and direction of E/I.
8.55
-
-
Supplying fitting & Fixing 20 Gauge G.C.I. sheet gate fitted on M.S. angle frame of size 60x60x6 mm including cost of fabrication,providing necessary locking arrangement with haskal and domny duly fixed in P.C.C (1:2:4) blocks of required size, applying a priming red lead paint over steel work complete as per direction of E/I.
57.82
-
-
Cost of 50 x 50 x 6 mm M.S. Angle as per specification and direction of E/I.
1.49
-
-
Cost of Barbed wire of 4 point 2 ply 12 SWG ,150 mm apart. As per specification and direction of E/I.
458.35
-
-
Labour for cutting of M.S Angle iron post to required length one end splitted as fishtailed in a length of 150 mm complete as per building specification and direction of E/I.
289.1
-
-
Drilling 6 mm holes M.S angle iron for fixing of staples etc. as per building specification and direction of E/I .
1321.6
-
-
Supplying fitting & Fixing straining bolt with nut size 25 cm x 10 mm dia tighten the barbed wire corner post complete as per building specification and direction of E/I.
1321.6
-
-
Labour for fitting and fixing barbed wire fencing in four rows horizontal up to height of 1.25 M and two diagonals including fixing of post in cement concrete at 2.5 M . Centers including cost of staples (but excluding the cost of cement concrete angle iron post its cutting and making holes, nut and bolts)all complete as per building specification and direction of E/I.
797.09
-
-
Manufacturing providing and supplying spirally welded/ ERW/ SAW/ Fabricated M.S. Pipes (Commercial Quantity) including procurements of Plates. Gas cutting to required size rolling tack welding assembling in suitable lenghths to form pipes, welding on automatic welding machine and forming 'v' edge on both ends of pipe including all taxes (Central and Local), railway freight, Insurance unloading form railway wagon, loading into truck transport to stores/ site, unloading, stacking etc.complete as per IS-3589 and IS-5504 as applicable as per specifications and direction of E/I.
-
-
-
A) 700 mm dia 10 mm thk (For Casing)
65
-
-
B) 500 mm d 10 mm thk (For Casing)
136
-
-
C) 350 mm 10 mm thick
65
-
-
D) 200 mm 10 mm thick
136
-
-
Pushing of M.S.pipe of following dia for road crossing and Raiway crossing by push through method in all types of strata by using hydraulic jack and drilling machine of required diameter below 3.0 m depth including lowering, laying, jointing of M.S. casting pipe including cost of labour, fuel and material, required welding machinery, tripod, chain pulley block crane, blower, etc. transportation and dewatering etc. complete as directed by Engineer in charge.
-
-
-
1) 500 mm dia to 1000 mm dia M.S. Pipe
201
-
-
Lowering laying and jointing in position to correct line and level including m.s. pipe with/ without any outcoating on pedestals or chairs upon prepared formation. The rate to include loading, unloading, hoisting, marginal cutting, wherever required, assembling and tack welding, and transportation upto 500 M etc complete as specified.
-
-
-
1) 350 mm dia
65
-
-
2) 200 mm dia
130
-
-
Welding in all position with required no. of runs, of MS pipes internaly/or externally including gauging wherever neccessory, fixing appurantences and other accessories in connection with pipe liying work as per specification. (10mm thickness)
-
-
-
1) 350 mm dia
13.2
-
-
2) 200 mm dia
19.64
-
-
Providing and applying graphite of apprived prime of first inferol 49 W emaline 05/ 58 pipe cost or any other equivelent approved pain to the internal surface of pipe line at sight.
-
-
-
First Coat
178.2
-
-
Second Coat
178.2
-
-
Providing & Construction of a Household Connection
-
-
-
Earth work in excavation(as per IS 3114/1965 for laying of different types and sizes of pipes so as to give one meter average cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per specification and direction of E/I.(For soil item B)
-
-
-
Providing and supplying blue MDPE pipes confirming to ISO 4427:1996 manufactured from vergin resin PE 80 food grade compounded raw material having blue colour only with quality assurance certificate from quality agencies like WRC / CIPET ( India) / DVGM / KIWA / SPGN for usage in drinking water with quality system all complete including cost all taxes, inspection charges transportation to work site and earth work involved, all complete job as per specification and direction of E/I. 20 mm dia pipe
-
-
-
Providing and supplying of compression fittings PN-16 rated in confirmation to ISO 14236:2000 and shall be tested as per ISO:3459,ISO : 3501 and ISO:3503 sitable for drinking water and approved by WRAS / UK / KIWA etc in food grade poly propyline and shall be inclusive of all cost such as testing, all taxes , inspection charges, transportation to work site as per specification and direction of E/I.
-
-
-
Female adapter 20 x 1/2"
-
-
-
Elbow 90 degree 20 mm dia
-
-
-
Coupling 20 x 20 mm dia
-
-
-
Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dia ferrule weight not less than 425 gram
-
-
-
Providing and fixing gun metal full way valve of 20mm dia and weight not less than 400 gram all complete as per specification and direction of E/I.
-
-
-
Providing & Supply of Clamp Saddle (DI Strap Saddle) for House Service connections from metal pipe Water Distribution mains shall be of fastened strap type with thread outlet for service connection. Clamp Saddle shall be suitable for nominal size of distribution mains pipe line.The strap shall be elastomer coated (insulated) type for firm grip on pipe as well as to protect the coating on the pipe and to insulate the unidentical metals . the saddle shall be single strap type up to pipe sizes of NB 600 and service outlet 15 mm, 15 mm, 20 mm & 25 mm. Fasteners shall be of threaded nut-bolt-washer type. the sealing between the saddle and mains shall be obtained by using a profiled elastomer seal matching to the curvature of the pipe. The seal shall be of elastomer type, material of construction of the body, straps, fasteners etc., shall be of non corrosive material such as engineering plastic (PE/PP ) or stainless steel or a combination of both. 100NB x15mm,25mm
-
-
-
Lowering laying and jointing HDPE/MDPE pipes in proper position including all specials by compression fitting/Electrofusion and But fusion jointing procedure including hydraulic testing as per relevent IS Code complete with all materials for jointing procedures like Electrofusion mschine, Electric Mirror/ heater/ But fusion welding machine with hydraulic jack, top loading clamp etc pump and accessories for hydraulic testing and all labours as directed by engineer incharge as per IS-7634 Part II
-
-
-
Earth work in back fillingthe trenches after laying of different types and sizes of pipes with earth removed during excavation within initial lead and lift as per specification and direction of E/I.(For soil item A & B)
-
-
-
Total Proposed Household Connections = 6000
6000
-
-
Providing, installing and giving satisfactory field testing of Domestic water meter, horizontal inferential multijet type with magnetic drive and dry dial suitable for ambient 50º C Temperature duly sealed against tampering complete with couplings at both ends and conforming to class B as per IS 779/1994 (VI Revision) with ISI mark along with manufacturer's test certificate and guarantee certificate, including cost of all materials and labour.
-
-
-
Total Connections = 6000 Nos
-
-
-
15 mm dia
6000
-
-
Total carriage of materials
-
-
-
Bricks Up To 10 Km
192.09
-
-
Sand Up To 10 Km
442.06
-
-
Chips Up To 10 Km
717.32
-
-
Cement Up To 5 Km
530.38
-
-
Steel Up To 5 Km
55.71
-
-
For parameters: PM10 µg/m3, SO2, Nox, CO approved laboratory and submission of report complete in all respect. Calibrated Equipments
48
-
-
To identify sources of noise, Noise due to traffic/transportation of vehicles, Noise due to heavy equipment operatoins, Duration and variations in noise over time etc, the equivalent, noise levels should be monitored (Lday and Lnight in Leq dBA) from NABL approved laboratory and submission of report complete in all respect.
48
-
-
Surface water monitoring PH, TDS Taste & Odour, Turbidity, Magnesium, Total hardness, Total alkalinity, chloride, sulphate, nitrate, flouride, calcium, Iron, pesticide, maganese, copper, Arsenic, Cadmium, Cyanides, Lead, Selenium, mercury.
8
-
-
Surface water monitoring Collecting representative samples and total coliform, Faecal coliform, IS: 10500 & as per CPCB criteria.
8
-
-
Drinking water PH, TDS Taste & Odour, Turbidity, Magnesium, Total hardness, Total alkalinity, chloride, sulphate, nitrate, flouride, calcium, Iron, pesticide, maganese, copper, aluminium, residual chlorine, zinc, Phenolic compounds, Arsenic, Cadmium, Cyanides, Lead, Selenium, mercury.
8
-
-
Surface water monitoring Collecting representative samples and total coliform, Faecal coliform, IS: 10500 & as per CPCB criteria.
8
-
-
Preparation of plans traffic management plan,waste (spoils) management plan etc.traffic management at work site (pavement making,channelizing devices,arrow panels and warning lights), ensure awareness raising on proper sanitation and personal hygiene to pramot proper helth, tretment of local migrantcworkers which will control the movement of disease vectors through contaminated water, mosquitoes and between people ). safety barricading along the work areas.
-
-
-
operation & Maintenance of existing WTP Including Chemicals, Electricity & maintenance staff and repair charges
-
-
-
EHS Supervisor
-
-
-
Measures Related to Make the WTP (existing) Compliant with environmental norms. Incuding Chemicals,electricity & maintainance staff and repair charges
-
-
-
Operation and maintenance for all components- Water treatment plant, Elevated Service Reservoirs, Intake Well, Raw Water Pipeline, Clear Water Pipeline, Distribution Pipelines, Pump House, Transformers, Staff Quarters and all appurtenant structures etc complete, as per O & M schedule and specification for each five years of the operation period The bid will be rejected if the bidder has not quoted O&M cost in the following rows. The price bid will be evaluated based on methodology given in clause no. 1.7 of section 3 of the bid document.
-
-
-
a) Fixed Cost (Man power, Maintenance of all Civil Structures, Mechanical, Electrical and entire plant House keeping all repaires including spares & replacement, Oil & Grease cost) etc complete as per O & M schedule and specification
-
-
-
1) First Year (INR)
1
-
-
2) Second Year (INR)
1
-
-
3) Third Year (INR)
1
-
-
4) Fourth Year (INR)
1
-
-
5) Fifth Year (INR)
1
-
-
b) Variable cost (Chemical Consumption cost)
-
-
-
1) First Year (INR/KL)
2006895.61
-
-
2) Second Year (INR/KL)
2052460.49
-
-
3) Third Year (INR/KL)
2098025.38
-
-
4) Fourth Year (INR/KL)
2143590.28
-
-
5) Fifth Year (INR/KL)
2189155.14
-
-
(c) Max guaranteed electricity consumption ( Please quote quantity in Kwh/year for serial no. 521 to 525 in column "M". This cost will be used for evaluation)
-
-
-
1) First Year (Kwh/year)
6.5
-
-
2) Second Year (Kwh/year)
6.5
-
-
3) Third Year (Kwh/year)
6.5
-
-
4) Fourth Year (Kwh/year)
6.5
-
-
5) Fifth Year (Kwh/year)
6.5
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements