Jharkhand Urban Infrastructure Development Company Limited Tender
Search from across the categories, cities, and authorities to find the latest Jharkhand tenders. Every Jharkhand tender is curated from credible sources of government websites (eProcurement Jharkhand portal) and newspapers, thus ensuring the credibility of the information presented to you. For more information on Jharkhand tender bidder registration, the login process and more read the FAQs section on this page.
Costs
EMD
₹ 9,71,880Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_UDD_35317_1Bid Award Id
ViewTender No
DMC/71/01/2018-19Tender Authority
Jharkhand Urban Infrastructure Development Company Limited ViewPurchaser Address
-Website
http://http://juidco.jharkhand.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
4 cm thick bitumastic sheet with hot bitumen of approved quality, using stone chippings (60% with 12.5 mm nominal size and 40% with 10 mm nominal size) @ 2.60 cum per 100 sqm and coarse sand @ 2.60 cum per 100 sqm of road surface and with bitumen @
56 kg/cum of stone chippings and @ 128 kg/cum of sand over a tack coat with hot straight run bitumen, including consolidation with road roller of 8 to 10 tonne etc. complete. (tack coat to be paid separately) :
With paving asphalt grade VG - 30 with no solvent
3840
-
315.36
... More
Providing and applying tack coat using bitumen emulsion conforming to IS: 8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom.
With medium setting bitumen emulsion
On bituminous surface @ 0.25kg/sqm
3840
-
8.4
... More
2.5 cm thick bitumastic sheet with hot bitumen of approved quality, using stone chippings (60% with 12.5 mm nominal size and 40% with 10 mm nominal size) @ 1.65 cum per 100 sqm and coarse sand @ 1.65 cum per 100 sqm of road surface and with bitumen @
56 kg/cum of stone chippings and @ 128 kg/cum of sand over a tack coat with hot straight run bitumen, including consolidation with road roller of 8 to 10 tonne etc. complete. (tack coat to be paid separately) :
With paving Asphalt grade VG - 30
3840
-
207.12
... More
JOGGING TRACK
Supply and installation of Playflex EPDM rubberized flooring in insitu form with top layer of 6mm 100% EPDM (Ehtylene Propylene Diemonomer) and bottom layer of 9mm Styrene-Butadiene Rubber (SBR). The EPDM granules ranging from 1mm to 4mm should have granules distribution such as 1mm – 2%, 2mm -1mm – 10-20%, 3mm- 2mm – 30-40%, 4mm-3mm – 38-48% 4mm – 3%. The EPDM granules should have specific gravity – 1.5+/-0.0, Hardness (Shore A) – 62-67, Density – 700-730 kg/cu.mtr, Tensile strength 4.0 MPa, Elongation @ BREAK 400% and curing system – Peroxide cured. The SBR granules should be primarily in the range of 1-4mm size and to be used primarily to create cushion effect. PU binder quality should be from company like BASF for insitu application to be done. The flooring work should have material defects warranty of 3 years.
3019.9998
-
3556
... More
OUTDOOR ADULT FITNESS CHILDREN PLAY AREA
Supply and installation of Playflex EPDM rubberized flooring in insitu form with top layer of 6mm 100% EPDM (Ehtylene Propylene Diemonomer) and bottom layer of 9mm Styrene-Butadiene Rubber (SBR). The EPDM granules ranging from 1mm to 4mm should have granules distribution such as 1mm – 2%, 2mm -1mm – 10-20%, 3mm- 2mm – 30-40%, 4mm-3mm – 38-48% 4mm – 3%. The EPDM granules should have specific gravity – 1.5+/-0.0, Hardness (Shore A) – 62-67, Density – 700-730 kg/cu.mtr, Tensile strength 4.0 MPa, Elongation @ BREAK 400% and curing system – Peroxide cured. The SBR granules should be primarily in the range of 1-4mm size and to be used primarily to create cushion effect. PU binder quality should be from company like BASF for insitu application to be done. The flooring work should have material defects warranty of 3 years.-25mm thk
820
-
4359.42
... More
SKATING, YOGA & MEDITATION ZONE
Earthwork in excavation in foundation trenches in ordinary soil(vide classification of soil Item A) and disposal of excavated earth as obtained to a distance upto 50m. Including all lifts, levelling,ramming the foundationn trences,removing roots of trees,shrubs all complete as per approved design,building specification and direction of E/I
960
-
109.36
... More
Supplying & Providing dry hard stone metal soling/pitching with 60-75mm metal laid in courses-
368
-
479.66
... More
Providing PCC M75 with nominal mix of (1:4:8) in foundation with approved quality of metal stone metal grade III(50mm to 25mm), size clean coarse sand of FM 2.5 to 3 including screening, shuttering mixing cement concrete in mixer and placing in position , vibrating,striking,curing , taxes and royality all complete as per building specification and direction of Engineer In Charge
152
-
3580.92
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.
(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately).
IPS Flooring
95
-
6445.06
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
1568
-
453.5
... More
Providing & laying complete as per drawing and technical specifications laid
finished flush
310
-
606.43
... More
Stone Flooring Marble
20
-
1569.26
... More
COMPOUND WALL & M S GATE
Earthwork in excavation in foundation trenches in ordinary soil(vide classification of soil Item A) and disposal of excavated earth as obtained to a distance upto 50m. Including all lifts, levelling,ramming the foundationn trences,removing roots of trees,shrubs all complete as per approved design,building specification and direction of E/I
100
-
109.36
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
44
-
120.72
... More
Providing PCC M75 with nominal mix of (1:4:8) in foundation with approved quality of metal stone metal grade III(50mm to 25mm), size clean coarse sand of FM 2.5 to 3 including screening, shuttering mixing cement concrete in mixer and placing in position , vibrating,striking,curing , taxes and royality all complete as per building specification and direction of Engineer In Charge
8
-
3580.92
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.
(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately).
All Works up to Plinth Level
22
-
6445.06
... More
All Works above Plinth Level upto floor V level
5
-
7216.51
... More
Centering and shuttering including strutting, propping etc. and removal of form work for :
Foundations, footings, bases for columns
40.00000000000001
-
186.19
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts
64
-
449.14
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers
45
-
329.18
... More
Providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing TMT Fe 500(Only valid for SAIL & TATA Steel JSPL And Vizag Steel)
2655.0000000000005
-
65.84184
... More
Providing designation 75A brick work in CM(1:4) in superstructure with approved quality of clean coarse sand of FM 2 to 2.5 including providing 10mm thick mortar joints of screening materials,scaffolding raking out joints to 15mm depth curing ,taxes and royalty all complete as per building specification and direction of Engineer In Charge
25
-
4128.29
... More
Providing 25mm thick cement plaster (1:4) with clean coarse sand of FM 1.5 including screening ,curing with all leads and lifts of water ,scaffolding taxes and royalty all complete as per building specification and direction of Engineer in charge
170
-
202.64
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor,etc., up to floor five level, excluding the cost of centering, shuttering and finishing:
1:11⁄2:3 (1 cement:11⁄2 coarse sand:3 graded stone aggregate
20 mm nominal size)
4
-
6710.78
... More
Finishing walls with Acrylic smooth exterior paint required shade:New Work(Two or more coat applied @1.67ltr/10sqm over and including priming coat of exterior primer applied @2.2kg/10Sqm)
204
-
92.21
... More
Making 30mm groove in plaster as instructed by Engineer-in-charge
200
-
32.78
... More
P/F MS Gate (6.00x2.20)
820
-
100.46
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:
Two or more coats on new work
30
-
75.26
... More
Full height Turnstile with control card-single channel- fully stainless steel structure and bars, 220v power supply. mounting brackets bi-directional, access control compatibility power supply; 220v ac. 50hz weatherproof, bolttogether
construction for easy access along confined
routes shock absorbing coupling between mechanism and rotating arms mechanical release in event of power failure will operate with any access
control system high precision control mechanism
long service life with minimum maintenance .With Accessories
4
-
278243.08
... More
SECURITY & TOILET
Foundation and Substructure works Earthwork in excavation in foundation trenches in ordinary soil(vide classification of soil Item A) and disposal of excavated earth as obtained to a distance upto 50m. Including all lifts, levelling,ramming the foundationn trences,removing roots of trees,shrubs all complete as per approved design,building specification and direction of E/I
All kinds of soil
376
-
109.36
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to
50 m and lift upto 1.5 m.
277
-
120.72
... More
Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked materials.
All kinds of soil
99
-
49.68
... More
Supplying and filling in plinth with clean sand under floors including, watering, ramming consolidating and dressing complete.
10
-
881.04
... More
Supplying chemical emulsion in sealed containers including delivery as specified.
Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
24
-
178.51
... More
Diluting and injecting chemical emulsion for Pre--CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :
With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration.(Plinth
Area calculation)
176
-
30
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :
Providing PCC M75 with nominal mix of (1:4:8) in foundation with approved quality of metal stone metal grade III(50mm to 25mm), size clean coarse sand of FM 2.5 to 3 including screening, shuttering mixing cement concrete in mixer and placing in position , vibrating,striking,curing , taxes and royality all complete as per building specification and direction of Engineer In Charge
34
-
3580.92
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement
: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over
75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
254
-
432.34
... More
Centring and shuttering including strutting, propping etc. and removal of form for :
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
665
-
329.18
... More
Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12mm thick
107
-
289.92
... More
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate / retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge.NOTE- 1) Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately.
All work above plinth level upto floor V level
248
-
7216.51
... More
Masonry, Plastering, Flooring works
Providing Random rubble stone masonry in cement mortar (1:4) in superstructure with hammer dressed stone of less than 0.03 m3 in volume and clean coarse sand FM 2 to 2.5 including cost of screening ,ranking out joints to 20mm depth curing ,taxes and royalty all complete as per building specification and direction of Engineer in charge
cement mortar 1:4 (1 cement : 4 coarse sand)
82
-
2622.63
... More
Providing designation 75A brick work in CM(1:4) in superstructure with approved quality of clean coarse sand of FM 2 to 2.5 including providing 10mm thick mortar joints of screening materials,scaffolding raking out joints to 15mm depth curing ,taxes and royalty all complete as per building specification and direction of Engineer In Charge
Cement mortar 1:6 (1 cement : 6 coarse sand)
55
-
4128.29
... More
Providing designation 125mm thick reinforced designation 75A brick work in CM(1:4) in superstructure with approved quality of clean coarse sand of FM 2 to 2.5 including cost of screening ,carriage of materials scaffolding ,ranking out joints to 15mm depth curing ,taxes and royalty (but excluding the cost of reinforcement)all complete as per building specification and direction of Engineer In Charge cement mortar 1:4 (1 cement : 4 coarse sand)
6
-
512.03
... More
Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry (with F.P.S. bricks).
6
-
54.58
... More
Providing 12mm cement plaster (1:6) with clean coarse sand of FM1.5 including screening,curing with all leads and lifts of water ,scaffolding taxes and royalty all complete as per building specification and direction of Engineer In charge
1:6 (1 cement : 6 coarse sand)
393
-
124.6
... More
Providing 25mm thick cement plaster (1:6) with clean coarse sand of FM 1.5 including screening ,curing with all leads and lifts of water ,scaffolding taxes and royalty all complete as per building specification and direction of Engineer in charge
1:6 (1 cement : 6 coarse sand)
204
-
184.94
... More
Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of FM 1.5 including screening ,curing with all leads and lifts of water ,scaffolding taxes and royalty all complete as per building specification and direction of Engineer in charge 1:4 (1 cement : 4 coarse sand)
107
-
136.62
... More
Providing and applying plaster of putty 2mm thickness over the plastered surface to prepare the surface even and smooth complete
500
-
113.95
... More
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: Water thinnable cement primer
704
-
35.47
... More
Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work
500
-
81.17
... More
Finishing Walls with Acrylic Smooth exterior Paint of required shade: New work (two or more coat applied @ 1.67lit/10 Sqm) over and including priming coat of exterior primer applied @ 2.20Kg/10 Sqm
204
-
92.21
... More
Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly ,scaffolding and taxes all complete as per building specification and direction of engineer In charge Two or more coats on new work
8
-
53.71
... More
Providing and fixing Ist quality ceramic glazed wall tiles of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 and jointing with grey cement slurry @ 3.3kg per sum including pointing in white cement mixed with pigment of matching shade complete.
81
-
715.01
... More
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS :
15622 of approved make in colours such as White, Ivory, Grey, Fume
Red Brown, laid on 20 mm thick Cement Mortar 1:4 including pointing the joints with white cement and matching pigment etc., complete.
85
-
660.82
... More
Granite stone flooring with 18mm thick over 20 mm (average) thick base of cement mortar
1:4 laid and jointed with grey cement slurry including rubbing and polishing complete with :
4
-
2820.19
... More
Providing and laying 25mm thick kotah stone slab flooring of approved size,texture and colour over 18mmm thick base of lime mortar (1:1:1)(lime putty,:surkhi:coarse sand) laid over and joined with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of Engineer in Charge
68
-
1455.17
... More
Doors, windows works Providing and fixing pressed steel door frames Profile B
70
-
326.74
... More
Supplying,fitting and fixing good quality ,well dressed and well seasoned teak wood work in choukhat in doors,windows skylights fanlights and C/W windows openings,including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of Engineer In charge Second class teak wood
1
-
108265.81
... More
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters using following hinges.
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
12
-
2389.39
... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured)
12
-
351.22
... More
Extra for cutting rebate in flush door shutters (Total area of the shutter tobe measured).
12
-
122.64
... More
30mm thick factory made solid both side Pre-laminated panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mmx19mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded Pre-laminated PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on either side forming styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel. 10mm (5mmx2) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5mm thick both side Pre-laminated PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge. Manufacturer‟s specification & drawing (for W.C. and bathroom door shutter).
14
-
3103.39
... More
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300x16 mm
13
-
203.95
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm
5
-
95.71
... More
Providing and fixing Stainless steel D type handles with necessary screws etc complete a) L 300mm/325mm x 22 to 25mm dia
5
-
1353
... More
Providing & fixing Stainless Steel tubular lever D-Type mortise handles with round/Square nose,24mm Mortise/sash lock body & Strike plate (all SS Finish), Pin cylinder 60mm with one side key and other side knob/thumb turn with necessary screws etc. complete For all floors
8
-
4711
... More
Providing and fixing IS : 3564 marked Aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. complete.
13
-
397.87
... More
Stainless Steel Cylindrical lock 60mm with pair of knob, keys etc. with necessary screws etc.
5
-
918
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS: 733 and IS : 1285, anodised transparent or dyed to required shade according to IS: 1868, (Glazing and panelling to be paid
for separately) :For fixed portion.
131
-
340.99
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately).
164
-
398.45
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) :
With float glass panes of 5.50 mm thickness(weight not less than 13.75 kg/sqm)
17
-
963.79
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs grade No.2 and M.S. top cover of required thickness for rolling shutters.
80x1.25mm M.S. laths with 1.25 mm thick top cover.
9
-
2223.46
... More
Providing and fixing ball bearing for rolling shutters.
1
-
364.13
... More
Grill works
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete
Fixed to openings /wooden frames with rawl plugs screws etc
M.S.grill work for windows and ventilators weighing 21 kg/sqm using M.S. flats, or M.S. square rods,
112
-
107.95
... More
Water Proofing works
Providing and laying integral cement based for water proofing treatment including preparation of surfaces as required for treatment of roofs, balconies, terraces etc. consisting of following operations: a) Applying and grouting a slurry coat of neat cement using 2.75 kg/per sqm of cement admixed with proprietory water proofing compound cleaning surfaces before treatment, b) Laying cement concrete using broken bricks / brick bats 25 mm to 100 mm size with 50% of cement mortar 1:5 (1 cement: 5 course sand) admixed with proprietory water proofing compound confirming to IS:2645 over 20 mm thick of layer of cement mortar of mix 1:5 (1 cement: 5 corse sand) admixed with proprietory water proofing compound confirming to IS:2645 to required slop and trating similarly the adjoining to walls upto 300 mm height including rounding of junction of wall and slab. c) After 2 days of proper curing applying a second coat of cement slurry admixed with proprietory water proofing compound to confirming to IS:2645 and finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 coarse sand) admixed with proprietory water proofing compound confiring to IS:2645 and finally finishing the surface with towel with neat cement slurry and making of 300 x 300 mm square. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test, All above operations to be done in order as
directed and specified by E/I. With average thickness of 120 mm and minimum thickness at khurras
point to be 65.
125
-
993.26
... More
DRAIN WORK
Earthwork in excavation in foundation trenches in ordinary soil(vide classification of soil Item A) and disposal of excavated earth as obtained to a distance upto 50m. Including all lifts, levelling,ramming the foundationn trences,removing roots of trees,shrubs all complete as per approved design,building specification and direction of E/I
881
-
109.36
... More
Providing PCC M75 with nominal mix of (1:4:8) in foundation with approved quality of metal stone metal grade III(50mm to 25mm), size clean coarse sand of FM 2.5 to 3 including screening, shuttering mixing cement concrete in mixer and placing in position , vibrating,striking,curing , taxes and royality all complete as per building specification and direction of Engineer In Charge
35
-
3580.92
... More
Supplying & Providing dry hard stone metal soling/pitching with 60-75mm metal laid in courses
Consolidated thickness 230mm.
70
-
479.66
... More
Providing designation 75A brick work in CM(1:4) in foundation and plinth with approved quality of clean coarse sand of FM 2 to 2.5 including providing 10mm thick mortar joints of screening materials,scaffolding raking out joints to 15mm depth curing ,taxes and royalty all complete as per building specification and direction of Engineer In Charge
215
-
4128.29
... More
Providing 25mm thick cement plaster (1:4) with clean coarse sand of FM 1.5 including screening ,curing with all leads and lifts of water ,scaffolding taxes and royalty all complete as per building specification and direction of Engineer in charge
930
-
202.64
... More
Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge.
770
-
920.98
... More
PAVED AREA
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.
2195
-
86.5
... More
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.
73
-
2047.06
... More
Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M30 grade made by heavy duty block making machine with strong vibratory compaction using 3 tonne roller and of approved size and design / shape laid in 50 mm thick compacted bed of course sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.
2195
-
591.07
... More
Cast in Situ Cement Concrete M20 kerb (Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause
408)
2480
-
215.04
... More
LANDSCAPING WORK
Surface dressing of ground including removing vegetation in equalities not exceeding 15 cm deep and disposal of rubbish lead upto 50 m and lift upto 1.5 mt. - Hard soil
4800
-
13
... More
Rough dressing and making of mounds for all the soft landscape areas of soil development like lawn area, flower beds etc including trenching to a depth of 30cms breaking clods flooding with water, uprooting weeds from above area after 10 to 15 days of its flooding including disposal of uprooted vegetation as directed by the engineer incharge and then fine dressing for planting new grass
4800
-
30
... More
Supplying and stacking of good earth (suitable for horticulture work) at site including royalty and carriage (earth measured in stacks will be reduced by 20% for payment)
720
-
292
... More
Supply at site of work well decayed farmyard manure from any approved source approved by Engineer including screening and stacking as per MORT & H specification 308.2
72
-
403
... More
Supplying of sludge duly stacked at site /store as per MORT & H specification 308.2
72
-
403
... More
Spreading of sludge, farm yard manure or /and good earth in required thickness (cost of sludge, farm yard manure or/and good earth to be paid separately)
72
-
53
... More
Supply and stacking of local sand (Grading zone III or coarser) dung manure (cow dung) on site and mixing with good earth (good earth from item already supplied by Contractor) including mixing earth, sand and cow dung in proportion of 75% earth 20% sand and 5% of cow dung as directed by the Engineer and then spreading over lawn areas as well as filling in excavated pits, planters, flower beds etc in required thickness as per specification or as directed by the engineer incharge and carriage up to 200 m lead.
432
-
958
... More
Supply and Filling with approved black garden soil and spreading of the same in soft landsacpe areas with layers of 20 cms thickness in sequence and depths as specified by consultants
720
-
872
... More
Supply and application of manure and fertiliser as per horticulture specifications and as instructed by Consultants on site.
Sampurna - 19:19:19
120
-
14
... More
Urea
120
-
9
... More
Neem cake
120
-
13
... More
MOP - Murrete of Pottash
120
-
8
... More
Micronutrient mix (organic manure)
120
-
7
... More
Supply and application of pesticides and insecticides as specifed by Consultant and as per horticultural specifications on site.
Chloropyrifos - 20% EC
60
-
407
... More
Monocrotophos - 50% EC
60
-
528
... More
Sevin Powder
60
-
238
... More
Providing and applying Chemical weed control by means of spraying of non-selective weedicide Paraquet dichloride 24 wsc gramoxore from ICI Zeneca to entire lawn area as per specification with spraying of wedicide for control - Of weeds in the garden premises , Glyphosphate - 41%SL -
60
-
210
... More
Providing and application of COCO PIT - COCONUT FIBRE WASTE to soft landscape areas as specified by consutlants as per horticultural specifications.
4800
-
30
... More
Supply and grassing with Doob grass in rows 7.5 cm apart in either direction by dibbling process including watering and maintenanace of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and free for mowing including supplying of good earth if needed as per MORTH specification 307
4800
-
15
... More
Supply and plantation of specified types of healthy, trees, Palms & Bamboo including digging pits of 0.75 mtr x 0.75 mtr including adding and mixing 5-10 Kg manure and 100 g bonemeal (per pit) with excavated soil ( this specification is only for trees) & incase of Palms, ratio of leaf mould, loam, and sand should be 1:2:4 including breaking of the clods completely and debris removed including mixing of the filled soil with neem cake in required proportion including providing Bamboo staking to the height of Tree while planting including their free maintenance up to six months beyond the date of completion of entire work notified by Engineer as per specification and direction of the Engineer including replacing of any plants with similar plants in case of death of plant /tree or plant / tree have become diseased or have failed to take roots over the maintenance period including treatment with fungicide or insecticide as and when necessary during the free maintenance period. The plant /tree will be selected and approved by Engineer before plantation.
TREES, SHRUBS,CLIMBES
DELONIX REGIA
25
-
60
... More
AZADIRACHTA INDICA / SAMPANGI
25
-
60
... More
Alstonia scholaris
25
-
60
... More
ASHOK
25
-
41
... More
Ficus religiosa
25
-
60
... More
TERMINALIA ARJUNA
25
-
60
... More
MEDIUM TREE
PLUMERIA ALBA
20
-
120
... More
CALLISTEMON
20
-
60
... More
CASSIA SIAMEA
20
-
60
... More
MUSSAENDAERY THROPHYLLA
15
-
100
... More
SHRUBS
CESTRUM NOCTURNUM
25
-
40
... More
TABERNAEMONTANA DIVARICATA
20
-
40
... More
GYM & KIDS PLAY EQUIPMENT WORK (INCL BINS & BENCHES)OUTDOOR GYM EQUIPMENT
Providing & installation of the main frame of ABS BOARD is made up of 80 NB G.I. pipes with leg support structure. The back rest is fixed over 40NB back rest frame. Back rest is made up of rectangular pipes of 50 X 25 X 3 mm thick. All pipes are uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. All open ends of pipe closed by GI / HDPE caps for user safety against entrapment.
2
-
25400
... More
Providing & installation of the main frame of AERIAL STROLLER is made up of 80 NB G.I. pipes with G.I. plating up to 40 micron thickness. This main frame is rest on 80 NB G.I. Pipe to give it strength. Foot rest bend pipe is made up of 40 NB G.I. pipes. Foot rest is made with the help of high quality FRP (Fiber Reinforced Plastic) material. Foot rest is mounted on main frame with the help of specially designed bearing assembly for its free movement. Bearings used are oil sealed, self-lubricated made by reputed company. Handle is made by 25 NB G.I. pipes. All pipes are uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment.
2
-
35600
... More
Providing & Installation 25NB Galvanized pipe bend to form ring and spokes consists of 20NB G.I. pipes that connect to each other to form a pair of wheels of FOREARM TWIRL. These wheels are mounted on both ends of 40 NB G.I. pipe bend with specially designed bearing housings and shaft assemblies. This bend pipe is fixed to main frame of 80 NB G.I. Pipe. Handle is fixed over the pipe ring for free movement of wheels. All pipes are uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment. Handle for rotating the ring fixed over the pipe ring.
1
-
26700
... More
Shoulder Twirl Double- Providing & Installation of 25NB Galvanized pipe bend to form ring and spokes consists of 20NB G.I. pipes that connect to each other to form a wheel of SHOULDER TWIRL. This wheel is fixed to 80 NB main support galvanized pipe with the help of 40NB connector pipe with specially designed bearing assemblies. Bearings used are oil sealed, self-lubricated made by reputed company. Two wheels with Nylon knobs are provided on center support in opposite direction to each other. All pipes are uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment. Handle for rotating the ring fixed over the pipe ring.
1
-
43200
... More
Providing & Installation of the main frame of SKY WALKER is made from 80NB & 40NB Galvanized pipe. The handle pipe consists of 25NB Galvanized pipes with PVC grip on top end. This handle pipes are hinged over 80NB main frame with the help of specially designed heavy duty bearings. Bearing used are of standard make. The handle pipe is further extended to the rectangular tube of 50 x 25 mm on both sides with 40NB galvanized pipe links. Paired rectangular tubes with four foot rests are linked to main frame. Foot rest is made with the help of high quality FRP (Fiber Reinforced Plastic) material. Total structure is supported on base frame made up of rectangular pipe of 80x40 mm. Side frames are made up of 25NB galvanized pipes. All pipes are uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment.
1
-
86600
... More
Providing & Installation of the main frame of Leg Press consists of 80 NB G.I. pipe with two specially designed
brackets attached on it. Brackets are made of M.S. material with G.I. plating. The moving frame of Leg Press is made of 40NB G.I. pipes which are mounted to main frame with the help of specially designed, machined shaft and bearing housing. Bearings used are oil sealed, self-lubricated made by reputed company. Foot rest is hinged to main frame with the help of specially designed G.I. plated clamp and 25 NB G.I. pipes. Gusset plates are provided to give extra strength to foot rest. Foot rest is made of high quality FRP (Fiber Reinforced Plastic) material. Specially designed Nylon pads are provided at the bottom of moving frame. Seat and back rest provided are made of FRP/ LLDPE / HDPE plastic. All pipes are uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment.
1
-
72400
... More
Providing & Installation of the main frame of Shoulder Exerciser Builder consists of 80NB G.I. pipe with two
specially designed brackets attached on it. Brackets are made of M.S. material with G.I. plating. The connecting links are made of 40NB G.I. pipes which are mounted to main frame with the help of specially designed, machined shaft and bush bearing. The handle frame is made of 25 NB galvanized pipe. Handle is linked to the seat with 40NB pipe which is hinged to main vertical support pipe with the help of specially designed bush bearings. FRP / HDPE / LLDPE plastic seat fixed over 40NB G.I. bend pipe. Footrest is provided to seat frame which is made up of 25NB G.I. pipes. This seat frame is hinged over vertical support pipe through 40NB galvanized pipe links with the help of specially designed bush bearings. Foot rest is made up of 20 NB G.I. pipes. Specially designed Nylon pads are provided at the bottom of seat frame. All pipes are uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment.
1
-
135800
... More
Providing & Installation of the center frame of the Chest Press & Shoulder Exerciser Combination is made up of 80NB G.I. pipe bend and FRP sheet. Specially designed brackets are bolted to center frame. These brackets are made of M.S. material with G.I. plating. The connecting links are made of 40NB G.I. pipes which are mounted to main frame with the help of specially designed machined shaft and bearing housings. The handle frame is made of 25 NB galvanized pipe. Handle is linked to the seat with 40NB pipe which is hinged to main vertical support pipe with the help of specially designed bearing assemblies. FRP /
HDPE / LLDPE plastic seat fixed over 40 NB G.I. pipe seat frames. This seat frame is hinged over vertical support pipe through 40NB galvanized pipe links with the help of specially designed bearing assemblies. Bearings used are oil sealed, self-lubricated made by reputed company. Foot rest is made up of 20 NB G.I. pipes. All pipes are uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment.
1
-
141300
... More
Providing & Installation of two vertical posts of 80 NB G.I. pipes connected with each other by G.I. sheet and M.S. flats with G.I. plating acts as a main frame of Pull Up Station. Vertical pipes are supported on base plates of 100x10 M.S. flat with G.I plating. 25 NB G.I. pipes are used for foot rest. Two rectangle pipes of 50 x 25 are used for resting forearms. Two 20 NB pipes perpendicular to each other are provided to give better gripping on each rectangular pipe. PVC grips are provided on the 20NB G.I. pipes. Pull up Handle is made up of 25 NB and 20 NB G.I. pipes. G.I. sheet is provided to support back rest. All pipes are uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment.
1
-
31900
... More
Providing & Installation of 40NB G.I. pipes are bent and grounded. Two frames are kept parallel to each other. These two frames together form Push Up Bar. All pipes are uniformly powder coated up to minimum 60 micron thickness to avoid corrosion.
2
-
11100
... More
Providing & Installation of the main frame of Triple Twister consists of 80 NB G.I. pipe with handle attached on it. Handle pipe is made up of 25 NB and 15 NB G.I. pipes which forms a shape of wheel. Rotating disc made from FRP / HDPE / LLDPE plastic are supported over 80NB G.I. pipes stands with the help of specially designed heavy duty bearings. Bearings used are oil sealed, self-lubricated made by reputed company. The discs are bolted to main frame with the help of 40NB G.I. pipe. Three foundation stands, made of 80 NB G.I. pipes and G.I. plated M.S. round plates are provided. All pipes are uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment.
1
-
78800
... More
PLAY EQUIPMENT
Providing & Installation of MAPS 38 - 5to 12 age includes Square Deck with Window Canopy :
The platform is made up of Fiber Reinforced Plastic with anti-skid surface with thickness of 4-5 mm. The top of platform is anti-skid surface that children do not slip on it when it is wet. At the top of the deck there is a window canopy is made in LLDPE in molding process of 2-3 mm thick. Roto flag is attached on top. The vertical supports of the deck are made up of 80 NB GI pipes.
FRP Slant B rid ge 8’ Lo n g : The FRP Bridge is made from Fiber Reinforced Plastic of 4 – 5 mm thickness. It has railing made from rotational molding process with support of 20 NB GI pipes.
S wing ing B r idge 8’ Long :
The swinging bridge is made of rotational molded planks and is suspended with galvanized
chains. The frame is of 80NB pipes with railing made from LLDPE & is supported by 20NB GI pipes
FRP Curve B rid ge 8’ L on g : The FRP Bridge is made from Fiber Reinforced Plastic of 4 – 5 mm thickness. It has railing
made from Rotational molding process with support of 20 NB GI pipes.
Fire Men Pole:
This pole of the fire men is made up out of 40 NB GI pipe and is made for the purpose using it as
a climber.
Mini Tube Slide 5’ ht :
It is made from FRP. The slide is supported with a ‘T’ support of 80 NB pipe. The MS flange with GI plating is used for fixing ‘T’ support.
Roller Slide:
In the roller slide the slide is in FRP &the rollers are made up of HDPE with UV stabilized pigment of 2.5 mm thickness provided with Nylon bush and are mounted on 12 mm dia rod and are fixed inside the slide chute.
FRP L ad d er 5’ ht : The ladder is made up of FRP with a thk of 3-4mm. The top surface of the ladder should be such
that it should not deserve any kind of skiddy movement.
Rock Climber 7’ht : It is made from FRP. The rocks are mounted on platform and it has gradient from the ground. The climber is supported by 25NB pipe from the bottom.
Wave Slide 2 lane:
The Wave Slide chute is made up of 4-5 mm thick of Fiber Reinforced Plastic. The wave shape is given in such a manner that it will not give any
jerk or bump to the rider. The chute has its end such as it causes safe landing of the child. The landing portion is horizontal with respect to the ground. The supports provided are made up of 25 NB GI pipe.
FRP Spiral Slide With railing:
Spiral slide chute is made of fiber reinforced plastic having shell thickness of 4-5 mm. The slide
is supported on 80 NB GI pipe. The landing module is supported by 20 NB pipe. The railing is made up of LLDPE in Rotational molding process. It is support by 20 NB GI pipe. Net Climber:
The net climber is made up of 18 mm dia Nylon rope attached by specially designed Nylon rope clamps. The ropes are provided to the pipe
frame and are fabricated from 25 NB GI pipes with 12 mm dia ‘U’ hooks.
1
-
1210700
... More
Multi Seater see-saw -Providing & Installation of The Multi Seater See saw comprises four Rotational seats. The lever consists of 20 NB and 80 NB powder coated GI pipes. The bearing used in this product is heavy duty nylon bush type. The stand for see saw is made using 50 NB GI pipe.
2
-
25400
... More
Four seater arc swing -Providing & Installation of The arched shaped side frame is made of 80 NB GI pipes and top pipe is made up of 50 NB GI pipes. The frame is powder coated to give an esthetic look. The four swings are made up of 10 mm thick anti-skid hequered reinforced rubber top. The rubber belt seat is suspended on 6 mm rubber coated GI chain. The ball bearings are mounted inside a specially designed nylon clamp.
1
-
96100
... More
Statellite Scrameler -Providing & Installation of the satellite scrambler comprises of top globular frame, ladder frame and support column and steps. The pipes used for the satellite scrambler is made up of 25 NB and 40 NB GI pipes. The top globe is fabricated from 25 NB GI pipes supported on a 40 NB vertical GI pipes. The structure is powder coated to avoid rusting and for esthetic look. The steps of the ladders are made from 15 NB GI pipes. The chain ladder is having 7 mm
thickness for climbing the scrambler.
1
-
61600
... More
Crystal maze -Providing & Installation of CRC pipes having outer diameter of 19 mm. These pipes are
assembled together using 4 mm thick MS plates of 150 mm dia. duly electroplated with powder coating and bent to suit the shape of the product. The whole structure is supported on 40 NB GI pipes.
1
-
70000
... More
Flying butterfly -Providing & Installation of the leg support of this product is made up of 40 NB, while the top bar is made from 50 NB powder coated GI pipes. The frame is made from 25 NB and 20 NB GI pipes. The frame is attached to the top pipe by heavy-duty bearing with special casting, for load sustaining
1
-
34500
... More
Half round net scrambler -Providing & Installation of the half round net is made of horizontal 40 NB GI pipes, which is in a semi-circle shape. This pipes are bolted to vertical 80 NB GI pipes for end supports, and for center support, vertical 40 NB GI pipes are bolted. The climber providing good exercise is made up of 18 mm dia. Nylon rope. Nylon ropes are integrated in specially designed nylon clamps which hold it tightly and avoids breaking. The nylon rope is attached to the frame with the help of ‘U’ hooks.
1
-
68400
... More
MGR- Providing & Installation of the platform of this platform MGR consists of non-skid type G.I chequered plate of 16 SWG. The ring on which the chequered plate is based is made out of 25 NB GI pipes. The platform farm below the chequered plate is of 40 x 40 x 5 and 25 x 25 x 5 GI angle. It is provided with handrails of 20 NB GI pipes. The whole structure is mounted on heavy-duty bearing shaft permanently lubricated with water sealant. The stand of this MGR platform is made out of 80 NB GI pipes. The foundation frame is fabricated with
40 x 40 x 5 GI angle
1
-
56500
... More
Providing & Installation of Toddler maps 14 (3 to 8 age) includes- Square Deck Without Canopy :
The Platform Is Made Up Of Fiber Reinforced Plastic With Anti-Skid Surface With Thickness
Of 4-5 Mm. The Top Of Platform Is Anti-Skid Surface That Children Do Not Slip On It When
It Is Wet. The Vertical Supports Of The Deck Are Made Up Of 80 NB GI Pipes.
Staircase :
The Staircase Is Made Up Of Fiber Reinforced Plastic With A Conservative Thickness Of 3-4
Mm. The Staircase Has Sufficient Reinforcement To Maintain Strength And To Avoid Bending. The Top Surface Of The Ladder Should Be Such That It Should Not Deserve Any Kind Of Skiddy Movement. The Handrail Is Made From 20 NB & 25 NB GI Pipes Respectively.
B owl Sl i de 3 ’ht With Slide entry :
Its sliding chute is of FRP with a 4-5mm thk. There is a suitable handgrip on the side of the slide.
Rotational molded slide entry is provided at top of the slide.
Hor i z ontal Cl i mber 3’ht: The main frame of the horizontal climber is made from 40 NB GI pipes. The main frame is supported on an 80 NB GI pipe. A 20 NB pipe is
welded to the frame for climbing. The structure is powder coated to avoid rusting and gives esthetic look.
Double Swing with Bucket Seat:
The leg support of the double swing is made up of 40 NB while the top bar is made up of 50 NB GI pipes. The swing bucket seat is made
from Rotational moulded plasticand suspended with nylon rope of 10mm thick. The handle for gripping is also made in Rotational moulded plastic.
Steering Wheel:
The steering wheel is made from low density polyethylene (LLDPE) in rotational molding process. The wheel
is provided with a bush to get a rotating movement.
Bubble Panel :
The Bubble Panel is provided for the decks for safety purpose. Its frame is made up of LLDPE in Rotational molding process and bubble is made
up of acrylic material. It is supported by 20 NB GI pipes which are clamped to the vertical support pipe with the help of 80 NB and 80x20 NB
clamps.
Railings :
The Rotational railing is provided for all the decks for safety purpose. It is made up low-density
polyethylene plastic (LLDPE) in rotational mould process and has a support of 20 NB powder coated GI
pipes. The railing is attached to the support pipe using a nylon clamp.
It is made in LLDPE, Rotational molding process. The railing is supported by 20NB GI pipes with Nylon clamps.
1
-
228300
... More
Toddler comb 3in 1(2-4 yrs) -Providing & Installation of combination of three products such as swing, slide and seesaw. The complete frame of this product is fabricated from 20 NB and 25 NB powder coated GI pipes. The slide in the combination set is made up of Fiber reinforced plastic (FRP). The slide landing support is made in 20 NB pipe. The slides are given a smooth finish so that the child does not hurt itself while playing on it. The bucket swing is made up of LLDPE and is attached to a nylon rope. For the bucket swing a handle is given for gripping, which is made in rotational molding and out of LLDPE. The see-saw lever and stand is made up of 20 NB GI pipe. The see saw seat is made out of LLDPE. The bearing used is of heavy-duty bush type.
1
-
42700
... More
Pony Spring- Providing & Installation of the whale/pony or bike is made out from fiber reinforced plastic (FRP). The handles of duck & pony provided for gripping is made up of 15 NB GI pipes, whereas the duck is made out of LLDPE in rotational molding. The duck is mounted on a pair of heavy-duty compression spring. Also a GI flat is provided for footrest. The spring is mounted on 5mm thick plate. And the stand for support is made out of 40 NB pipe.
1
-
22600
... More
Duck Spring -Providing & Installation of the whale/pony or bike is made out from fiber reinforced plastic (FRP). The handles of duck & pony provided for gripping is made up of 15 NB GI pipes, whereas the duck is made out of LLDPE in rotational molding. The duck is mounted on a pair of heavy-duty compression spring. Also a GI flat is provided for footrest. The spring is mounted on 5mm thick plate. And the stand for support is made out of 40 NB pipe.
1
-
17600
... More
OTHER
Providing & fixing of the sleek bench is made from FRP 'C' channel wood finish (ISO) patti. The thickness
of the strips is 4mm. The seating portion and backrest portion is made up of FRP and the stands are made up of MS rectangular tube with GI coating. At the end of the strips plastic end caps are given to prevent dust particles from entering in it. The sleek bench can accommodate 3 adults at a time.
40
-
13100
... More
Dustbins-Tree Trunk - This trunk bin is made up of FRP sheet with a 3 mm to 4 mm thick sheet of diameter
1.25 feet and given a shape of a trunk with attractive color and a lid.
2
-
14000
... More
Dustbins-Aluminium Bins This novel kind of dustbin is especially designed for accommodating dry as well as
wet kind of trash. The cylinder of the bin is fabricated out of Aluminum perforated sheet 280-300 mm in diameter and 380 mm long with a self-closing tilt able lid. The drum is mounted on nylon bearings to provide it with complete rotation of the drum to facilitate the garbage removal. The frame of the dustbin is made up of 25 NB powder coated GI pipes.
5
-
11400
... More
PLUMBING WORK INTERNAL PLUMBING SANITARY INSTALLATIONS
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including
providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres),
including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.
8
-
9293.27
... More
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern,
with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :
10
-
11227.1
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including
painting of fittings and brackets, cutting and making good the walls wherever require:
9
-
2206.61
... More
Providing and fixing white vitreous china pedestal for wash basin
completely recessed at the back for the reception of pipes and fittings.
9
-
936.24
... More
Providing and fixing CP Brass 32mm size Bottle Trap of
approved quality & make and as per the direction of Engineerin- charge.
19
-
763.34
... More
Providing and fixing PTMT Waste Coupling for wash basin and sink,
of approved quality and colour.
Waste coupling without pop-up 32mm full thread. 130mm length (Chrome)
19
-
94.85
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in -charge.
8
-
244.6
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
6
-
132.33
... More
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl
plugs etc., complete.
4
-
515.81
... More
Supplying and installing in position Modular Urinal Partitions of Marino UMP SS series / MACRO / Greenlam make or equivalent make. Panels shall be of 18mm thickness made up of Solid Compact Laminate 18mm thickness (Phenolic Core Board) as per IS 2046 based on thermosetting resins, homogeneously reinforced with cellulose fibres with necessary SS "L" Bracket with brasing all complete as per approved drawings and direction of Engineer-in-Charge. Size of Panel to be 900mm x 450mm.
8
-
700
... More
Providing and fixing Toilet Paper Holder with cover of approved make and model with CP brass screws complete.
Code RA816713001 from Roca or equivalent make
8
-
320
... More
SOIL, WASTE & VENT PIPES
Providing and fixing soil, waste and vent pipes.
100 mm dia. Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
100
-
888.52
... More
Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 75 mm dia.
120
-
729.41
... More
Providing and fixing plain bend of required degree.
100 mm dia.
Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
10
-
294.82
... More
Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 75 mm dia.
14
-
238.27
... More
Providing and fixing door piece, insertion rubber washer 3mm thick, bolts and nuts complete100 mm
sand cast iron S&S as per IS-3989
12
-
492.14
... More
75mm sand cast iron S&S as per IS-3989
16
-
366.48
... More
Providing and fixing terminal guard. 100 mm Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905
4
-
341.62
... More
Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe of same manufacturing
100 mm dia
SS 304 grade coupling with EPDM rubber gasket
4
-
346.08
... More
75 mm dia SS 304 grade coupling with EPDM rubber gasket
6
-
312.96
... More
Providing and fixing M.S. stays and clamps for sand cast iron / centrifugally cast (spun) iron pipes of diameter : 100 mm
4
-
59.52
... More
75 mm
6
-
54.29
... More
Providing and fixing GI pipes complete with GI fittings and clamps, i/c cutting and making good the walls etc and making good the same for waste water disposal complete as per direction of engineer incharge.
32 mm dia nominal bore (Wash basin to floor trap/floor drain)
18
-
296.02
... More
40 mm dia nominal bore (Sink, Urinal to floor trap)
10
-
378.38
... More
50 mm dia nominal bore (Floor Drain to Floor Trap)
15
-
453.5
... More
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof
10
-
256.44
... More
Providing and fixing floor drain & balcony drain made of 100 x 50 mm dia elbow / tee as applicable connected with 50 mm dia GI pipe painted with primer, two coats of black bituminastic paint, wrapping 1 mm thick PVC tape and final coat of black bituminastic paint B109 complete in all complete including cutting and making good the walls and floor wherever required
18
-
5514.75
... More
Providing and fixing floor clean out plug consist of CI bend & GI socket heavy class with Brass cap & key for opening male threaded cap etc. including lead caulked to CI pipes complete in all respects as per drawing/ sample approved by Engineer -in -Charge FCO (floor clean out plug shall be flushed with floor finish
100 mm dia
8
-
1102.95
... More
75 mm dia
6
-
980.4000000000001
... More
Supply, Installation, Testing & Commissioning of WC connector socket (for vitreous china & CI pipe) of EPDM/PVC offset connector of 100mm dia
8
-
3921.6
... More
RAIN WATER PIPING
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
110 mm diameter
50
-
226.89
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm
6
-
174.14
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
2
-
39.26
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
Single Push fit Coupler 100 mm
4
-
90.77
... More
SEWERAGE AND DRAINAGE
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design:
100 mm diameter S.W. pipe/RCC NP2
15
-
598.03
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 150 x 100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
4
-
1558.32
... More
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with
C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of
class designation 7.5
20
-
1147.54
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia
20
-
216.43
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m
6
-
120.72
... More
Providing and fixing 5000 ltr capacity SEPTIC TANKS of sintex or approved make including nozzles for inlet, outlet, overflow, drains, vent, float valve for inlet and hinged type manhole cover with locking device etc. complete with all necessary flanges, fittings and fixtures with all tools, confirming to IS 458:2003 standards as specified in the drawings.
1
-
215000
... More
WATER SUPPLY
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. INTERNAL WORK - EXPOSED ON WALL Internal work – Exposed on wall
32 mm nominal outer dia Pipes(SDR-11)
10
-
277.48
... More
40 mm nominal outer dia Pipes(SDR-11)
8
-
370.08
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
Concealed work including cutting chases and making good the walls etc.
15 mm nominal outer dia pipes (SDR-11)
45
-
236.46
... More
20 mm nominal outer dia pipes (SDR-11)
25
-
273.46
... More
25 mm nominal outer dia pipes (SDR-11)
15
-
320.25
... More
32 mm nominal outer dia pipes (SDR-11)
10
-
396.35
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
50 to 80 mm nominal bore (SDR-11)
30
-
740.35
... More
Providing and fixing ball valve (brass) of approved quality, High or low-pressure, with plastic floats complete : 15mm
12
-
275.7
... More
20mm
6
-
313.97
... More
25mm
4
-
318.62
... More
Providing and fixing gun metal non- return valve of approved quality
(screwed end) : 50 mm nominal bore Horizontal
2
-
948.19
... More
Supply, installation, Testing & Commissioning of PN10 rated Solenoid valves including High / Low switches, and all necessary electric wiring, cabling complete 50 mm nominal bore
2
-
49020
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil
Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia
3
-
216.43
... More
Providing and fixing in position 25 mm diameter mosquito proof coupling of approved municipal design. 25 mm diameter
2
-
36.9
... More
Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main 25 mm nominal bore
1
-
349.15
... More
Providing and fixing unplasticised PVC connection pipe with brass unions: 45 cm length 15 mm nominal bore
25
-
65.09
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690
gms.
20
-
472.85
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
10
-
456.67
... More
Providing and fixing approved Indian make CP brass air valves with gunmetal isolation valve fixed on pipe lines. 15mm n.b air vent with 15mm isolation valve.
2
-
2083.35
... More
20mm n.b air vent with 20mm isolation valve.
2
-
2328.4500000000003
... More
Supplying and installing Bourden type pressure gauges range 0 to 20 bar 10mm brass gauge cock brass pipe snubber etc complete.
6
-
919.125
... More
Supply, Installation, Testing & Commissioning of PN10 rated Bronze Compact Pressure Reducing Valve stations complete with 2# isolating valves, Y Strainer, Union and 1# bypass valve & 2# pressure gauges etc. as shown in drawing
PRV suitable for pipeline size of 40mmØ N.B. 6.5 - 1.5bar
2
-
104167.5
... More
PRV suitable for pipeline size of 32mmØ N.B. 6.5 - 1.5bar
2
-
95589
... More
EXTERNAL WATER SUPPLY
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
4
-
216.43
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External Work 15 mm nominal outer dia pipes (SDR-11)
10
-
115.82
... More
20 mm nominal outer dia pipes (SDR-11)
15
-
143.33
... More
25 mm nominal inner dia Pipes (SDR-11)
20
-
183.98
... More
50 mm nominal inner dia Pipes (SDR-11)
16
-
464.88
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps,
i/c cutting and making good the walls etc. 25 mm dia nominal bore
20
-
237.94
... More
50 mm dia nominal bore
10
-
453.5
... More
Providing and fixing gunmetal gate valve with CI wheel of approved quality (Screwed end) 25 mm Nominal Bore
6
-
411.07
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 100 mm diameter Class I
4
-
3184.85
... More
Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) : 50 mm dia
4
-
4475.95
... More
Providing and fixing ball valve (SS) as per specifications of PN 10 rating.
25 mm nominal bore
3
-
3063.75
... More
32 mm nominal bore
2
-
4166.7
... More
40 mm nominal bore
6
-
6948.585
... More
50 mm nominal bore
5
-
7720.65
... More
Supply, Installation, Testing & Commissioning of Underground Tank Covers:
500mm dia Ductile Iron cover with frame (Medium duty)
4
-
30637.5
... More
560mm dia Ductile Iron cover with frame (Heavy duty)
4
-
36765
... More
Supply, installation, testing and commissioning of HDPE Pipe PE-100 Material grade, PN 10 (10.00 Kg/cm2) pressure rating conforming to IS : 4984 - 1995/ISO : 4427-1996 (E) including heavy duty Electro welded fitting such as reducers, tees, bends, flange, steel structural supports, clamps including cost of MTR fittings as required for valves and irrigation sprinklers, sand Bed of 200 mm thick laid as per manufacturer recommendation etc. (For irrigation Supply)
25 mm dia
25
-
490.2
... More
40 mm dia
20
-
643.3875
... More
50 mm dia
15
-
832.1145
... More
EXTERNAL STORM WATER DRAINAGE
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth,1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m , disposed earth to be levelled and neatly dressed.
All kinds of soil
6
-
120.91
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia
15
-
216.43
... More
Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm dia
30
-
337.92
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m
35
-
120.72
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 150 mm dia R.C.C. pipe
50
-
342.43
... More
250 mm dia R.C.C. pipe
20
-
462.77
... More
Constructing brick masonry open surface drain including with edge protected with MS plate of 3 mm thick with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 fine sand) including earth excavation, 10cm thick bed concrete 1:5:10 (1 cement: 5 fine sand :10 graded stone aggregate 40mm nominal size) and 25mm thick cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 12.5 mm nominal size) for filling hunches including 12mm cement plaster 1:4 (1 cement:4 coarse sand) with a floating coat of neat cement inside the drain, its top and exposed side including disposal of surplus earth complete as per standard design. 300mm drain 450 mm average depth With F.P.S bricks
40
-
8578.5
... More
Domestic water Hydropneumatic pumps System Peak Flow 160lpm Head 25 M no. of pumps: 2(1w+1s) flow per pump : 80lpm Bladder Vessel : 100 lit (min) Skid Assembly with butterfly valves to isolate each pump,NRV for each pump, suction and discharge manifold in GI.Y strainer at suction of pump set with butterfly valve. Starter VFD (IP 55 rated) for each pump with Microprocessor panel with wiring upto pumps and VFDs with Control Panel mounted on skid
1
-
306375
... More
Flushing water Hydropneumatic pumps System Peak Flow 200lpm Head 25 M no. of pumps: 2(1w+1s) flow per pump : 100lpm Bladder Vessel : 100 lit (min) Skid Assembly with butterfly valves to isolate each pump,NRV for each pump, suction and discharge manifold in GI.Y strainer at suction of pump set with butterfly valve. Starter VFD (IP 55 rated) for each pump with Microprocessor panel with wiring upto pumps and VFDs with Control Panel mounted on skid
1
-
428925
... More
Providing and fixing heavy duty floating flange EPDM rubber expansion bellows with unit control (tie rod & gusset plate) as per manufacturers specifications of standard length complete with all accessories and a working pressure not less than 16 Kg./sqcm including rubber gaskets, flanges, nuts, bolts & washers complete as required.
50/80 mm dia (min.) or required size and required number (one on suction and discharge of every pump)
8
-
9191.25
... More
Providing and fixing gun metal or bronze ball valves/butterfly valve/NRV/Rotameter, tested to 15.00 Kg / cm2, screwed end connections complete . (Make: Leader/ Zoloto or equivalent)
6
-
11642.25
... More
ELECTRICAL WORK
DISTRIBUTION BOARDS
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator) 8 way (8 + 24), Double door
1
-
5462
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
24
-
166.08
... More
Double pole
3
-
444.48
... More
Triple pole and neutral
1
-
855.36
... More
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 A
1
-
640.32
... More
Power Cabling
Supply of 1100V grade XLPE/PVC insulated sheathed & armoured (unless otherwise specified as flexible) Fire Retarded Low Smoke (FRLS) cables indoor or outdoor on existing trays/walls/columns/ indoor/ trenches complete as per specifications, as required and as below 4 C 4 sqmm YRY
50
-
179
... More
Cable Termination
Supplying and making end termination with brass compression gland and Bimetalic lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 3C, 3.5C, 4C 4
4
-
109
... More
CONDUIT WIRING+ Wiring for light/ power plug with 2X2.5 sq. mm FRLS PVC insulated copper flexible conductor wire in surface/ recessed medium class MS conduit alongwith 1 No. 2.5 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
42
-
116
... More
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper flexible conductor wire in surface/ recessed medium class steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
22
-
239
... More
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 20 mm
150
-
120.96
... More
25 mm
350
-
141.12
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch
22
-
80.64
... More
15/16 A switch
10
-
109.44
... More
3 pin 5/6 A socket outlet
12
-
77.76
... More
6 pin 15/16 A socket outlet
10
-
146.88
... More
Telephone socket outlet
4
-
92.16
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75 mmX75 mm)
16
-
168
... More
3 Module (100 mmX75 mm)
22
-
177.6
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 1# 3 pin 5/6 A modular socket outlet and 1# 5/6 A modular switch, connections etc. as required.
12
-
514
... More
LIGHT FIXTURES
supply,Installation, testing & commissioning of light fixtures complete with:
a) All fixing accessories mounting bracket
b) Earthing of fittings
Supply, Installation, Testing , storing & Commissioning of 18 W LED Recessed Downlighter with system efficacy of 80 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. The luminaire should have a color temperature of 6500K and CRI80. The luminaire shall meet IP20 rating with THD20% and PF 0.9. The luminaire housing should made of pressure die cast aluminium and the luminaire optics shall have a high efficiency diffuser with more than 85% transmittance.
15
-
884
... More
Supply, Installation, storing, Testing & Commissioning of LED Based LED Bulkhead with High Pressure Die Cast Aluminium Body provided with Polycarbonate cover, System Lumen Package of 700 lm and a maximum System Wattage of 9 Watts, Color Temperature of 6500K, Power Factor 0.9 with THD20%,IK Rating of IK09, Operating Voltage Range of 90-300V AC.
20
-
750
... More
1 x 28W T5 Wall / Surface mounted Tube Light
6
-
575
... More
Jogging track
Design, Supply , installation, testing and commisioning of Lighting System for Jogging track Area with 3.5Mtr pole for post top lantern(hot dipped, galvanised and decorative pole)mounted with Unique aesthetic Elliptical shaped LED Post Top light 40-45W delivering 3400 Lumens made of Die cast AL housing, Injection Molded PC diffuser ,(Similar To Lighting Technologies ADORNIS LED MIn Post Top 45W) NABL certified Test report to be furnished, placed at a distance of 10-12 Mtr between the poles at centre of the jogging tracks as per the drawing , to achieve Avg 15 Lux through out the the Jogging track Uniformly, with necessary electrical system including, Cables, Panel, Earthing and Foundation of the pole etc. complete.
1
-
1088854
... More
Skating & meditation Area
Design,Supply ,Installation, Tesing and Commissioning of Lighting System for Skating and DesignMeditation Areas with 9Mtr Asymmetric Double Arm Octagonal Pole mouted with Unique aesthetic 120-140W Street Light delivering more than 14500Lumens(Similar To Lighting Technologies ADORNIS LED INT 120W Street Light) , and Unique aesthetic 30-40W Street Light Delivering more than 4100Lumens(Similar To Lighting Technologies ADORNIS LED MIN 35W Street Light)at 6Mtr Height , Light fixtures made of PDC AL alloy housing,IP66, SUrge protection upto 10kV with External SPD,THD10%, PF0.95, NABL certified Test report to be furnished. Erected as per the Layout in the drawing to achieve an AVG of 30 Lux in Skating and Meditation Areas Uniformly, with necessary Electrical system including, Cables , Panel ,Earthing and Foudnation of the pole etc. complete.
1
-
1772256
... More
Children Play & General Area
Design,Supply, Installation, Tesing and Commissioning of Lighting System for Child Play and General Area with 9Mtr Single Arm Octagonal Pole mouted with Unique aesthetic 120-140W Street Light delivering more than 14500Lumens (Similar To Lighting Technologies ADORNIS LED INT 120W Street Light) , fixtures made of PDC AL alloy housing,IP66, SUrge protection upto 10kV with External SPD,THD10%, PF0.95, NABL certified Test report to be furnished. Erected as per the Layout in the drawing to achieve an AVG of 30 Lux in Child Play and General Areas Uniformly when placed as per the drawing , with necessary Electrical system including, Cables , Panel, Earthing and Foudnation of the pole etc. complete.
1
-
753717
... More
REPAIR WORK-COMPOUND WALL Dismantling of old plaster in boundary wall with labour all charges are included . complete, all as per direction of Engineer-in-charge.
910.4
-
14.43
... More
Providing and applying 12mm thk cement plaster work in CM 1:4 with clean sand mixing with approved quality of materials. complete, all as per direction of Engineer-in-charge.
1138
-
137.07
... More
Providing and applying two coats of white wash on compound wall complete, all as per direction of Engineer-in-charge.
4544
-
9.11
... More
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: two coats on old work
4544
-
55.25
... More
Providing graphical figure on plastering wall, and painting inside compound wall complete as per specifications and direction of the Engineer-in-charge
1
-
150000
... More
Add 12% GST
42957938
-
0.12
... More
Add 1% Labour Cess
48112890
-
0.01
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements