Urban Development Department Tender
Search from across the categories, cities, and authorities to find the latest Jharkhand tenders. Every Jharkhand tender is curated from credible sources of government websites (eProcurement Jharkhand portal) and newspapers, thus ensuring the credibility of the information presented to you. For more information on Jharkhand tender bidder registration, the login process and more read the FAQs section on this page.
Costs
EMD
₹ 3,97,164Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_UDD_39288_1Bid Award Id
ViewTender No
DMC/14/01/2019-20Tender Authority
Urban Development Department ViewPurchaser Address
-Website
http://http://juidco.jharkhand.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
5.2.14 Providing designation 75 B Brickwork in C M (1:6 )in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm, thick mortar joints of screening materials, ranking out joints to 15mm depth, curing taxes and royalty all complete as per building specification and direction of E/I.
169.44
651796
3846.77
5.3.5.1 Providing P.C.C./RCC M200 With normal mix of (1:1½:3) in foundation with approved quality of stone chips 20 mm to 6mm size graded and clean coarse sand of FM 2.5 to 3 including screening, shuttering, mixing cement concrete in cement mixture and placing in position, vibrating striking, cursing (but excluding the cost of reinforce taxes and royalty all complete job as per building specification and direction E/I
99.31
578889
5829
5.3.6.1 Providing R.C.C. M-200 in band at plinth level with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mix-ink cement concrete in mixture and placing in position, vibrating, striking, curing, but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of E/I.
26.45
168215
6360.23
5.3.14 Providing RCC M- 200 with nominal mix of (1:1.5:3) in columns with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixture and placing in position, vibrating, striking, curing, but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of E/I.
36.18
252273
6972.73
5.5.4 5.5.4 (ii) Providing TOR steel reinforcement of 8 mm dia rods as per approved design and drawing excluding carriage of M.S. bar to work site, cutting, bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I.
(ii) 8mm dia Gr. A TMT FE 500 (Only valid of SAIL and TATA steel)
5.5.5 (a) Providing TMT steel reinforcement of 10 mm, 12mm & 16mm dia bars as per approved design and drawing excluding carriage of M.S. bars to work site, cutting, bending with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I.
(a) 10 mm (TMT coil Fe 500) (Only valid for SAIL & TATA Steel, JSPL, and Vizag Steel)
5.5.6 Providing Tor steel,reinforcement of 20mm, 25mm, 28mm, 32mm
dia bars as per approved design and drawing excluding carriage of M.S. bars to work site, cutting, bending with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I.
20125 mm dia TMT bar Fe 500 (Only valid for SAIL & TATA Steel)
JSPL, and Vizag Steel)
28132 mm dia TMT bar Fe 500 (Only valid for SAIL & TATA Steel)
JSPL, and Vizag Steel)
11.9
783517
65841.84
5.5.12 Supplying fitting and fixing M.S grill made of 20 x 6 mm, M.S flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, hoisting carriage of grill to work site hoisting as per building specification and direction of E/I.
9607.02
708421
73.74
5.6.3 Providing designation 75B one brick flat soling joints filling with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I.
1463.98
338560
231.26
5.7.3 Providing 12 mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty as per building and direction of E/I.
2807.56
349821
124.6
5.8.24 Providing two coat of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding, curing and taxes all complete as per building specification and direction of E/I.
2944.02
251860
85.55
5.8.45 Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direction of E/I.
532.62
28607
53.71
DSR 10.25 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings,
brackets, gatesand similar works
351.22
30187
85.95
5.1.1 + 5.1.2 Earth work in excavation in foundation trenches in ordinary soil Ivide classification of soil item A) and disposal of excavated earth a obtained to distance up to 50 mm including all lifts with levelling, ramming the foundation trenches removing roots of trees shrubs all complete as per approved design and per building specification and direction of E/I.
5.1.2 Extra for earth work in hard soil all complete as per specification and direction of E/I (vide classification of soil item B)
91.91
11077
120.53
5.2.6 Providing designation 75B bricks work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm, thick mortar joints, cost of screening materials ranking out joints to 15 mm depth, curing taxes and royalty all complete as per building specification and direction of E/I.
65.07
244044
3750.37
5.2.23 Providlng designation 125 mm thick reinforced designation 75A brick work in C M (1:4) in superstructure with approved quality of clean coarse sand of F M 2 to 2.5 including the cost of screening, carriage of materials, scaffolding raking out joints to'15 mm depth, curing. taxes and royalty (but excluding the cost of reinforcement) all complete as per including specification and direction of E/i.
1061.66
543602
512.03
5.3.3 Providing P.C.C.M-100 with normal mix of (1:3:6) in foundation with approved quality of stone metal grade-III (50mm to 25mm size) clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixture and placing in position, vibrating, striking, curing, but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of E/I.
96.55
374253
3876.35
5.3.8.1 Providing R C C.M-200 with nominal mix of ('1 1:5:3) in lintel with approved quality of stone ships 20 mm to 6 mm size graded and clean coarse sand of F M. 2.5 to 3 including screening, centering shuttering, mixing cement concrete in mixture and placing in position, vibrating, striking, curing, but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of E/I
3.41
25029
7340.05
5.3.9.1 Providing R.C.C. M-200 with normal mix of (1:1½:3) in roof slab with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixture and placing in position, vibrating, striking, curing, but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of E/I.
59.9
450636
7523.28
5.3.11 Providing RCC M- 200 with nominal mix of (1:1½:3) in beam of all types with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixture and placing in position, vibrating, striking, curing, but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of E/I.
2.35
19327
8224.42
5.3.12.1 Providing R C.C M-200 with nominal mix of ('1:'1:5:3) in stiffeners with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F M.2.5 to 3 including, shuttering, mixing cement concrete in mixture and placing in position, vibrating, striking, curing, but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of E/I
4.82
34669
7189.85
5.4.38 Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush shutters in doors and windows with black board core blended with high quality Phenol formal dehyde synthetic resin both side commercial veneered of standard make with oxidized iron fitting such as hinges, string door, bolts, tower bolts, handles or rings, hooks and eyes, cleats, sand blocks as per schedule taxes and royalty all complete as per building specification and direction of E/l
29.82
41525
1392.4
5.5.18 Supplying, fitting and fixing fully glazed steel door, windows or ventilations of standard rolled 'Z' and mullion steel sections and size as per lS- 1038 joints met and welded with '100x16x3mm M.S. lugs fixing in cement concrete (1:2:4) blocks 15x10x'1Ocm, size including cost of oxidized iron fittings, with hinges, handle per steps, catch springs 3mm thick plain glass panes with Aluminimum beads and inner frame fixed with lugs with 20mm long 6.3mm G.l. counter sunk machine screw and nuts and applying a coat of red lead paint carriage to work site hoisting and placing in position in all storys and taxes all complete as per building specification and direction of E/I.
4.46
15257
3420.92
5.6.20 Providing and laying 15 mm to 23 mm thick kotah stone tiles in risers of steps, skirting and pillars of approves size, texture and colour laid over 12mm thick cement mortar (1:3) and joined with grey cement slurry mixed with pigment to match the shade of the slab including rub bing to granolithic finish with approved quality all complete as per building specification and direction of E/I.
10.78
15874
1472.6
5.7.6 Providing 6 mm thick cement plaster (1:4) in ceiling with coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty as per building and direction of E/I.
190.11
25972
136.62
5.7.16 Providing 25mm. thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening curing with all leads and lifts of water scaffolding taxes and royalty all complete as per technical specification and direction of E/I.
143.22
31437
219.51
5.7.21 5.7.21 Making 6x6mm grooves in plaster surface over walls truly horizontal or vertical as specified. at regular intervals, at all heights including cleaning, finishing, scaffolding and curing wth all leads and lifts of water all complete as per building specification and direction of E/|.
292.68
22068
75.4
5.8.32 Providing two coats of synthetic enamel paint of approved shade and make over new wooden surface including cleaning the surface after removing dirt scales. smokes grease and sand papering, including cost of scaffolding and taxes all complete as per building specification and direction of E/I.
57.21
9256
161.8
5.8.43 Providing two coats of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface thoroughly cost of scaffolding and taxes all complete as per building specification and direction of E/I.
4.46
25488
5715
10.41.1.1 DSR Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strikeplate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineerin-charge Fixing with adjustable lugs with split end tail to each jamb
83.84
28534
340.35
11.26.1 DSR Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
25 mm thick
60.91
70537
1158.1
11.36 DSR Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved
make, in all colours, shades except burgundy,
bottle green, black of any size asapproved by
Engineer-in-Charge, in skirting, risers of steps
and dados,over 12 mm thick bed of cement
mortar 1:3 (1 cement : 3 coarse sand) andjointing
with grey cement slurry @ 3.3kg per sqm,
including pointingin white cement mixed with
pigment of matching shade complete.
207.59
154609
744.8
11.37 DSR Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be
specified by the manufacturer) of 1st quality
conforming to IS : 15622 of approved make in
colours such as White, Ivory, Grey,Fume Red
Brown, laid on 20 mm thick cement mortar 1:4 (1
Cement : 4 Coarse sand), including pointing the
joints with white cement and matching pigment
etc, complete.
71.96
49533
688.35
1.1.1 Jsor Wiring for light point/fan point/exhaust fan point/ call bell point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable in surface recessed PVC conduit, with piano type switch, phenolic laminated sheet, suitable size PVC/G.I. boc etc. as required.
Group A
30
15060
502
Wiring for ckt / submain wiring with earth wire (2x2.5sqmm + 1x2.5sqmm cu flexible cable)
60
10380
173
S/F Batten Holder: Supplying and fixing batten / angle holder including connection etc as required
20
1200
60
ITC Exhaust Fan upto 450 mm sweep: installation of exhaust fan upto 450 mm sweep in the existing opening, including making the hole to cut the size of the above fan, making good the damage, including connection, testing, commissioning etc as required.
4
1888
472
6 Way,Single Door
2
1338
669
2.11.1 Supplying and fixing 6 amps to 32 amps rating, 240 volts, "B" series, miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commossioning etc. as required.6/32, single pole, "B" series
12
1752
146
2.14.1 S/F DP MCB Isolator -
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. As required 40 amp
2
580
290
5.1 MV Cable Laying up to 25 sq. mm. in ground :-
Laying of one number PVC insulated and PVC Sheathed / XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm. direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
100
19700
197
Supply for aluminum armoured cable 10 sq.mm, 2 core
120
21384
178.2
Supply and fixing of 18/23W CFL lamp in existing
battan/angle holder. (Make :- Philips / Bajaj /Wipro).
18
3366
187
S/F/F surface/ Pendent mounting suitable for single T5 lamp luminaries Metalic Body chanel with acrylic with fitings.Code no.-539242BLTR 1 x 28WT (Bajaj)
8
8504
1063.09
Supply of 12" dia Khaitan India Exhaust fan
4
6120
1530
3.1.5.1 DWSD Providing and fixing male ended 15mm dia brass bib cock of approved quality (Wt. not less than 350gms.) with extra socket all complete as per specification and direction of E/I.
18
5655
314.19
3.1.7 DWSD Providing and fixing G.M. non return valve Horizontal/Vertical type of approved quality as per specification and direction of E/I.Horizontal - 25 mm dia
4
2079
519.99
3.1.18 Making holes in walls for laying G.I. pipe and restoring the same after pipe laying as per specification and direction of E/I.
(a) 250mm thick wall
10
1512
151.24
3.1.18 Making holes in walls for laying G.I. pipe and restoring the same after pipe laying as per specification and direction of E/I.250 mm thick wall
(b) 250mm thick wall
1
113
113.64
3.1.21 Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I
Glass self 22"
8
3890
486.34
3.1.21 Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I Mirror (450 x 300mm)
8
7577
947.16
3.1.21 (d) Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I CP brass shop dish container medium quality with screw and hinges etc.
9
1623
180.44
3.2.1 (A) (C) Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S.approved make with 100mm H.C.I. ‘p’ trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S.equivalent make, complete with all fittings,C.I. or C. C.brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of vitreous white glazed earthenware ware footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less than 50grms, 15mm P.V.C. connection pipe 450 mm. long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I.
580 mm. long (c) With high level C.I. cistem
17
65812
3871.31
3.2.3 (a) Supplying, fitting and fixing flat back or angular, lipped front vitreous white glazed earthen ware urinal of ‘Hindustan "Parry" or any other approved I.S.S make with 5 liters capacity C.I. automatic fulsing cistern of reliance for any other I.S.S. approved make with all fittings with C.I.or R.S. brackets, standard size G.I. flush pipe with fitting clamps,15mm C.I. body brass spindle stop cock of approved quality weight not less than 400grams, 15mm P.V.C./Alkthene pipe 450mm longwith brass coupling at both ends and doing plumber joints including painting of exposed part with two coats of approved paint over a priming coat of red oxide, cutting wall and floor, making good the same etc. all complete as per specification and direction of E/I.
(a) Flat back or standing corner (600mmx350mm)
8
26229
3278.69
3.2.5 Supplying fitting and fixing vitreous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S. approved make supported on painted C.I. or R.S. brackets 32mm C.I.brass waste, 15 mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I.
16
31890
1993.16
3.3.1 Earth work in excavation for laying of different types and sizes of R.C.C. spun pipes with disposal of excavated earth within initial lead and lift as per specification and direction of E/I.
12.15
2116
174.19
3.3.6.2 Labour for laying, fitting and fixing NP2 R.C.C. spun pipe with collars in lines, level and grade and providing approved jointing materials and joints properly filled to make them leak, proof including providing sight rails, bonning rod, night guard, Red light and barrier etc. all complete as per specification and direction of E/I.
150mm dia R.C.C. spun pipe Upto 3.0 metre depth of invert below G.L.
70
11060
158
3.3.8 Supplying materials and labours for constructing inspection chamber of designation class 75B bricks size 750mm deep, 600x450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600x475mm G.I. Cover with frame (weight not less than 36kg.) alongwith earth work in excavation and 80 mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per specification and direction of E/I.
13
92158
7089.13
Supplying laying fitting and fixing NP2 R.C.C spun
pipes --------------------------all complete as per
direction of E/I.150mm dia
60
20727
345.46
12.41.2 DSR Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
110 mm diameter
41.6
9832
236.35
12.41.1 DSR Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
75 mm diameter
5
743
148.75
12.42.2.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
Single pushfit Coupler 110 mm
10
945
94.55
12.42.3.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
Single tee with door 110x110x110 mm
10
1815
181.55
12.42.4.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
Single tee without door 110x110x110 mm
10
1676
167.6
12.42.5.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
Bend 87.5° 110 mm bend
10
1131
113.1
18.7.3 DSR Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
25 mm nominal outer dia Pipes
60
12972
216.2
18.8.1 DSR Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
15 mm nominal outer dia Pipes
24
5908
246.2
18.8.2 DSR Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
20 mm nominal outer dia Pipes
24
6836
284.85
18.48 DSR Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI :
12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and the base support for tank.
4500
32625
7.25
19.32 DSr Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design With common burnt clay F.P.S. (non modular) bricks ofclass designation 7.5
3
62044
20681.55
Construction of Septic Tank
2
186220
93110
5.1.2 Earth work in excavation in foundation trenching in Hard soil (vide classification of soil item- B) and disposal excavated earth a obtained to a distance up to 50M including all lifts with leveling ramming the foundation trenches removing routs of trees shrubs all complete as per approved design and per technical specification and direction of E/I.
342.81
3829
11.17
5.5.30 Supplying, fitting and fixing M.S. grill gate with M.S. grills made of 20 x 6mm M.S. flats or 16mm M.S. square bars fitted on 25 x 25 x 6mm M.S. Angle frame of size 60 x 60 x 6mm including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.(when steel is not supplied by the deptt.)
3628.8
352247
97.07
5.5.4 5.5.4 (ii) Providing TOR steel reinforcement of 8 mm dia rods as per approved design and drawing excluding carriage of M.S. bar to work site, cutting, bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I.
(ii) 8mm dia Gr. A TMT FE 500 (Only valid of SAIL and TATA steel)
5.5.5 (a) Providing TMT steel reinforcement of 10 mm, 12mm & 16mm dia bars as per approved design and drawing excluding carriage of M.S. bars to work site, cutting, bending with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I.
(a) 10 mm (TMT coil Fe 500) (Only valid for SAIL & TATA Steel, JSPL, and Vizag Steel)
5.5.6 Providing Tor steel,reinforcement of 20mm, 25mm, 28mm, 32mm
dia bars as per approved design and drawing excluding carriage of M.S. bars to work site, cutting, bending with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I.
20125 mm dia TMT bar Fe 500 (Only valid for SAIL & TATA Steel)
JSPL, and Vizag Steel) TMT bar Fe 500 (Only valid for SAIL & TATA Steel)
JSPL, and Vizag Steel)
9.66
615945
63762.52
11.20.3 DSR Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding /laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineering-Charge.
60mm thick Cement concrete paver block of M-35
grade with approved colour, design & pattern.
384
290361
756.15
5.6.7 Providing 25mm thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layer 19mm thick (1:2:4) with 12mm to 6mm down stone chips, in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royalty with all complete as per building specification and direction of E/I.
768
198128
257.98
Cost of Rotting and support as per quotation for 1 Moudle = 1440 sft / one Moudle
11520
3225600
280
3.6 (ii) (i) RCD Excavation in Soil using Hydraulic Excavator CK 90 and Tippers with disposal upto 1000 metres. (Excavation for roadwork in soil with hydraulic excavator of0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m) (II) Including Royalty @ Rs. 30.00 per cum, cost of watering, rolling & compaction
276
33672
122
3.19 RCD Compacting original ground- Compacting original ground supporting embankment Rolling with vibratory roller
276
10488
38
5.3.2 Providing P.C.C. M150 with normal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixture and placing in position, vibrating, striking, curing, but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of E/I.
138
739518
5358.83
16.68 DSR Providing and laying 60mm thick factory made cement concrete interlockingpaver block of M -30 grade made by block making machine with strongvibratory compaction, of approved size, design & shape, laid in requiredcolour and pattern over and including 50mm thick compacted bed of
coarsesand, filling the joints with fine sand etc. all complete as perthe direction of Engineer-in-
charge.
1024.09
630532
615.7
3.19 RCD Case II (i) Compacting original ground- Compacting original ground supporting embankment
31.72
856
27
5.3.30.1 5.3.30.1 Providing precast RCC M200 with nominal mix of (1:1½:3) slab of desired size with approved quality of stone chips and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I.
10.37
56918
5489.86
5.7.1 Providing 12 mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty as per building and direction of E/I.
184.11
25870
140.52
5.7.11 Providing 1.5 mm cement punning including curing carriage of water with all leads and lifts as per building specification and direction of E/I.
184.11
7944
43.15
5.3.7.1 Providing R C C M -200 with nominal mix of (1:1½:3) in band at lintel level with approved quality of of stone chips 20 mm to 6mm size graded and clean coarse sand of FM 2.5 to 3 including screening, shuttering, mixing cement concrete in cement mixture and placing in position, vibrating striking, cursing (but excluding the cost of reinforce taxes and royalty all complete job as per building specification and direction E/I.
0.64
4079
6393.51
5.3.15.1 Providing av 63 mm thick R.C.C.M -200 with nominal mix of (1:1½:3 ) Chajja with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixture and placing in position, vibrating, striking, 6mm cement plaster (1:4) in ceiling and sides of chajja with sand of F.M. 1.5 curing, but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of E/I.
8.73
8647
990.51
5.5.13 Providing and fixing fan hook of 16 mm dia M.S. bar 1 metre long bent to required size and shape, placed in position and fixed in R.C.C
slab/beam at the time of casting all complete as per building specification and direction of E/|. (where material is not supplied by deppt.)
1
114
114.31
5.7.15 Providing 19 mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening curing with all leads and lifts of water scaffolding taxes and royalty all complete as per technical specification and direction of E/I.
37.31
7777
208.46
5.8.18 Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I.
113.73
8883
78.11
5.8.32 Providing two coats of synthetic enamel paint of approved shade and make over new wooden surface including cleaning the surface after removing dirt scales. smokes grease and sand papering, including cost of scaffolding and taxes all complete as per building specification and direction of E/I.
14.36
2323
161.8
3.1.7 Providing and fixing G.M. non return valve
Horizontal/Vertical type of approved quality as per specification and direction of E/I.
Vertical - 25 mm dia
1
456
456.91
3.1.7 Providing and fixing G.M. non return valve
Horizontal/Vertical type of approved quality as per specification and direction of E/I.
Horizontal - 32mm dia
1
678
678.91
3.1.5.1 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and the base support for tank.
15
4712
314.19
3.1.10 (B) Providing and fixing N.P/C.P. brass /P.V.C. porcelain shower rose of 15mm inlet etc. all complete as per specification and direction of Engineer - in - Charge
(b) 125mm dia C.P. shower
1
139
139.13
3.1.17 Cutting chajja or cornice for laying G.I. pipe and restoring the same with R.C.C.(1:2:4) brick work in cement mortar (1:4) and cement plaster(1:4) as per specification and direction of Engineer-in-Charge.
7
1015
145.07
3.1.18 (a) Making holes in walls for laying G.I. pipes and restoring the same after pipe laying as per specification and direction of E/I.
(a) 125mm thick wall
6
681
113.64
3.1.18 (b) Making holes in walls for laying G.I. pipes and restoring the same after pipe laying as per specification and direction of E/I.
(b) 250mm thick wall
6
907
151.24
3.1.21 (b) Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I.
(b)Mirrors of 6mm thick plate glass bevelled edge mirror including C.P. brass revolving fittings 3mm ply wood board and C.P. hinges to fix with mirror.
(i) 600mm x 450mm size
6
7101
1183.55
3.1.21 (c) Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I.
(c) (i) C.P. brass towel rail 20mm x600mm with bracket container
4
2160
540.12
3.2.2 (b) (i) Supplying, fitting and fixing 40mm high vitreous white glazed earthen E.W.C. with ‘p’ trap of parry hindustan or any other approved
I.S.S. make including supplying and fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I.handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450grams 15mm P.V.C. alkathene pipe 45cm. long with brass coupling at both ends and white / black plastic solid state seal and lead of commander /cuckoo or other I.S.S. make with hinges or screws etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide priming, all complete as per specification and direction of E/I.
(i) With 'P' trap (b) 12.5 lit. low level PVC Cistem
4
15967
3991.9
Supplying laying fitting and fixing NP2 R.C.C Hume pipe spun pipes --------------------------all complete as per direction of E/I.150mm dia
30
10363
345.46
Special type C.P. Bath room Fitting for
V.I.P.Buildings(JAL, Jaquar, Mark or Equivalent) Angular Stop Cock (2 way bib cock/ stop cock)
4
2596
649
Pressure adjustable shower with revolging
joint(Pressure jet / hand shower)
4
3432
858
12.42.1 DSR Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion (i) Single socketed pipes. 75 mm
30
4462
148.75
12.42.2 DSR Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion (i) Single socketed pipes.
110 mm
30
7090
236.35
18.7.3 DSR Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
25 mm nominal outer dia Pipes
195
42159
216.2
18.8.1 DSR Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
15 mm nominal outer dia Pipes
38
9355
246.2
18.8.2 DSR Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
20 mm nominal outer dia Pipes
34
9684
284.85
DSR 18.58.1.1 Providing and fixing PTMT grating of approved quality and colour.
Circular type - 100 mm nominal dia
4
131
32.75
19.32.1 DSR Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design With common burnt clay F.P.S. (non modular)
bricks ofclass designation 7.5
1
20681
20681.55
Providing and fixing PVC Pipe fittings with all
accessories (supreme make)
i) 110 mm Door Tee (Supreme) P.V.C.
6
1446
241
75mm Door Tee (Supreme) P.V.C.
6
706
117.77
110 mm Plain Bend (Supreme) P.V.C.
9
2169
241
75 mm Plain Bend (Supreme) P.V.C.
9
1418
157.56
iii) 110 mm Plain Bend (Supreme) P.V.C.
9
1429
158.8
75 mm Plain Bend (Supreme) P.V.C.
9
629
69.99
vi) 110 mm Door Bend (Supreme) P.V.C.
4
763
190.9
75 mm Door Bend (Supreme) P.V.C.
5
959
191.9
v) 110 mm Cowel (Supreme) P.V.C.
7
427
61
vii) 110mm Plain floor Trap
13
2080
160
Construction of Septic Tank (5 users)
1
83075
83075
5.10.34 Providing 150mm. wide brick drain in cement mortar (1:6) with av.150 mm clear depth and 125mm apron including cost of earthwork involved with 75mm. cement concrete (1:4:3) over one brick designation 75A,flat soling in proper grade and slope at the base,the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.
30
16261
542.05
4.17 DSR Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20mm nominal size ) over 75mm bad by dry brick ballast 40mm nominal size well rammend and consolidated and grouted with fine sand including finishing the top smooth.
10.8
4863
450.35
10.14.1.1 DSR Providing and fixing pressed steel door frames conforming to IS: 4351,manufactured from commercial mild steel sheet of 1.60 mm thickness,including hinges, jamb, lock jamb, bead and if required angle threshold ofmild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressedmild steel welded or rigidly fixed together by mechanical means, includingM.S. pressed butt
hinges 2.5 mm thick with mortar guards, lock
strikeplateand shock absorbers as specified and applying a coat of approved steelprimer after pre- treatment of the surface as directed by Engineerin charge:
Profile B - Fixing with adjustable lugs with split
end tail to each jamb
15.45
5258
340.35
11.27 DSR Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillarslaid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarsesand) and jointed with grey cement slurry mixed with pigment to matchthe shade of the slabs, including rubbing and polishing complete.
19.93
24671
1238.2
12.42.2 DSR Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
Coupler - 110mm
2
205
102.65
Bend - 110mm
2
226
113.1
Shoe - 110
2
196
98
1.1.1 ELECTRIC Point wiring in PVC consuit, with piano type switch - Wiring for light point/exhaust fan point/call bell point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with piano type switch, phenolic laminated sheet, suitable size PVC/G.I. box etc. as required
40
20080
502
1.5 Electric Power Plug Wiring in PVC conduit (2x4 sq. mm):- Wiring for light/power plug with 2x4 sq.mm FR PVC insulated copper conductor single core cable in surface /recessed PVC conduit along with 1 number 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.
20
4240
212
1.7.1 Circuit / Sub-main wiring in PVC Conduit:- Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface / recessed PVC conduit as required. 2x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire
15
2190
146
1.7.2 Circuit / Sub-main wiring in PVC Conduit:- Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface / recessed PVC conduit as required. 2x2.5 Sqmm + 1x2.5 sq mm earth wire
220
38060
173
1.23.1 S/F piano type switch/socket - Supplying and fixing following piano type switch/socket on the existing switch box/cover including connections etc. as required.5/6 amps, one way switch
4
140
35
12.3.4 3 pin 5/6 amps, socket outlet
4
180
45
1.23.8 TV antenna socket outlet
2
108
54
1.23.10 Electronic step fan regulator, deluxe
2
426
213
1.29 S/F Modular type electronic fan regulator:- Supplying and fixing stepped type fan regulator
on the existing modular plate switch box including
connections but excluding modular plate etc as
required
4
700
175
1.33 S/F Ceiling Rose:- Supplying and fixing 2 pin ceiling rose on the existing junction box/ wooden block including connection etc as required.
42
1764
42
1.34 S/F Batten / Angle Holder:- Supplying and fixing batten / angle holder including connection etc as required.
11
660
60
2.8.7 S/F S.P. MCB DB: Supplying and fixing following way single pole and neutral sheet MCB distribution board, 240 volts on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatised and powder painted including earthing etc. as required ( But without MCB/RCCB/ ISOLATOR).
8way, Double Door
1
912
912
2.1.3 S/F rewire able double pole/TP&N switch
disconnector - Providing and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metal board with rewireable type
fuses, including drilling holes in metal board,
making connections, etc as required.
63 Amp
1
3686
3686
2.6.2 S/F sheet metal ON/OFF Load changeover - Providing and fixing capacity 2 pole/4 pole ON/OFF load changeover switch with side handle operation, in sheet enclosure in existing metal board including drilling holes in metal board, making connection, earthing the hody etc. as required.
63 amp
1
3311
3311
2.11.1 S/F DP MCB Isolator :- Supplying and fixing 6 amps to rating, 240 volts, "B" series, miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
6/32/amps single poles "B" Series
8
1168
146
2.14.2 S/F DP MCB Isolator -
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required
63 AMP
1
375
375
3.6 Copper earth plate elecrtode -
Earthing with copper earth plate 600mmx 600mm x 3mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. as required (But without charcoal or coke and salt)
1
7324
7324
3.7 Salt/Charcoal for plate earth electrode -Extra for using salt and charcoal for G.I. or copper plate earth electrode as required.
1
1542
1542
3.9 S/L 8 SWG copper wire in ground :- S/L 8 SWG G.I. wire in ground :- Supplying and laying 8 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc. as required.
40
3880
97
Supply of following sized SLPE insulated armoured cable (Make Havel's Polycable)
170
11922
70.13
2230 Supplying and fixing single wall mounted 20/22 watt LED type batten fitting complete with electronic driver and LED tube etc. directly on wall/ceiling including connections with 1.5 sq.mm. FR PVC insulated copper conductor and earthing the body etc. as required.
6
4580
763.39
5.12.6 (Bihar) Supplying and fixing 90 watt LED type street light with die cast aluminum housing for ingress protection of IP65 and complete with all accessories etc. on pole/building including connection with FR PVC insulated copper conductor cale and earthing the body etc. as required.
40
339285
8482.14
210 Bihar Supply and installation of regular/standard model A.C. ceiling fan of 1200mm sweep including wiring the down rods of standard length (upto 30cm) with 1.5 sq.mm. FR PVC insulated copper conductor etc. as required.
1
1251
1251.91
Supply and installation of 300mm, 230V A.C. exhaust fan in the existingopening including making good the damage, connection testing, commissioning etc. as required
6
6158
1026.4
S/F 32 amp. DP switch Flush type
6
1710
285
S/F 9/10 watt LED Bulb
10
1650
165
12.43.2 DSR Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete
110 mm
4
725
181.4
13.26 DSR Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
113.73
13499
118.7
13.47.1 DSR Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat
of exterior primer applied @ 2.20 kg/ 10 sqm)
103.32
10001
96.8
13.80 DSR Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete.
103.32
9025
87.35
21.1.1.2 DSR Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded
built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with
dash fasteners of required dia and size, including
necessary filling up the gaps at junctions, i.e. at
top, bottom and sides with required EPDM
rubber/neoprene gasket etc. Aluminium sections
shall be smooth, rust free, straight, mitred and
jointed mechanically wherever required including
cleat angle, Aluminium snap beading for glazing /
paneling, C.P. brass / stainless steel screws, all
complete as per architectural drawings and the
directions of Engineer-in-charge. (Glazing,
paneling and dash fasteners to be paid for
separately) : FIXED PORTION
7.62
2929
384.5
21.1.2.2 For shutters of doors, windows & ventilators
including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) - Powder coated aluminium (minimum thickness of powdercoating 50 micron)
14.85
6606
444.9
21.3 DSR Providing and fixing glazing in aluminium door,
window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness
3.73
2762
741.5
1.3.1 Point wiring in PVC consuit, with piano type
switch -
Wiring for light point/exhaust fan point/call bell point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with piano type switch, phenolic laminated sheet, suitable size PVC/G.I. box etc. as required
8
4064
508
1.5 Electric Power Plug Wiring in PVC conduit (2x4 sq. mm):- Wiring for light/power plug with 2x4 sq.mm FR
PVC insulated copper conductor single core cable
in surface/recessed PVC conduit along with 1 number 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.
18
3816
212
1.16 Telephone Wiring in Existing Conduit:- Supplying and drawing following pair,0.5 sq. mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface/recessed PVC conduit as required.(2
pair)
10
260
26
1.21.2 S/F PVC Conduit:- Supplying and fixing of following sizes of PVC conduit alongwith the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required
for Tele, RJ45 Cat 6 data outlet for computer network.
25 mm
22
2046
93
1.25 S/F Modular type electronic fan regulator:- Supplying and fixing stepped type fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required.
1
231
231
1.27.1 S/F Modular Boxes, base & cover plate:- Supplying and fixing following size / modules GI box along with modular base & cover plate for modular switches in recess etc as required.
1
132
132
1.24.1 S/F Modular type Switch / Socket:- Supplying and fixing following modular type switch / socket on the existing modular plate and switch box including connections but excluding modular plate etc as required.
5/6 amps,one way switch
2
118
59
1.24.4 S/F Modular type Switch / Socket:- Supplying and fixing following modular type switch / socket on the existing modular plate and switch box including connections but excluding modular plate etc as required.
5/6 amps, 3 pin socket outlet
2
150
75
1.24.6 Telephone socket outlet
1
71
71
1.31 Supply and Fixing Light Plug Point with Modular
Type Accessories:- Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin, 5/6 amps modular
socket outlet and 5/6 amps modular type switch,
connection, painting etc as required.
2
482
241
1.32 Supply and Fixing Light Plug Point with Modular
Type Accessories:- Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 15/16 amps modular
socket outlet and 15/16 amps modular type switch, connection, painting etc as required.
2
614
307
1.41 ITC fluorescent fitting directly on surface :-installation testing and commissioning of Pre - wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc, directly on ceiling / wall, including connection with 1.5 Sq. mm. FR PVC insulated, copper cond.
1
89
89
1.44 ITC Ceiling Fan:- Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (Up to 30 cm) with 1.5 sq. mm. FRPVC insulated,copper conductor,single core cable etc,
as required.
1
95
95
1.48 ITC Exhaust Fan/Wall Fan upto 450 mm sweep :- Installation of exhaust fan / Wall Fan upto 450 mm sweep in the existing opening, including making the hole to cut the size of the above fan, making good the damage, including connection, testing, commissioning etc as required.
1
472
472
2.8.4 S/F S.P. MCB DB: Supplying and fixing following
way single pole and neutral sheet MCB distribution board, 240 volts on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatised and powder painted including earthing etc. as required ( But without MCB/RCCB/ ISOLATOR). 8Way,Single Door
8way, Double Door
1
684
684
2.12.1 S/F 'C' series SP MCB:- Supplying and fixing 240 volts, 'C' series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB
complete with connections, testing and commissioning etc, as required. Make- Legrand/Schneider/ Siemens
6/32A Single Pole
5
730
146
2.12.5 S/F 'C' series SP MCB:- Supplying and fixing 240 volts, 'C' series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB
complete with connections, testing and commissioning etc, as required. Make- Legrand/Schneider/ Siemens
6/32A DP
1
351
351
3.2 Earthing with G.I. Pipe 4.5 mtr long 40 mm dia
including acessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. without charcoal or cock and salt) complete etc. as required
1
3940
3940
5.1 MV Cable Laying upto 25 Sq mm in ground:-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc, as required.
80
15760
197
2101 supply Supply and installation of regular/standard model ceiling fan of 1200mm sweep including
wiring the down rods of standard length (upto 30cm) with 1.5 sq.mm. FR PVC insulated copper conductor etc. as required
1
1251
1251.91
2104 Supply and installation of 300mm, Metal exhaust fan in the existingopening including making good the damage, connection testing, commissioning etc. as required
1
1026
1026.48
9.1.2 DSR 1.1 KV Cable End Termination:- Supplying and making indoor cable end termination with brass double compression gland and aluminium lugs for following size of PVC insulated XLPE Al. Ar. Cable of 1.1 KV grade as required.
2 Core 10 Sq. mm. 1.1 KV XLPE Al. Ar. Cable.
(1R FROM MAIN LINE. To DB)
2
316
158
Supply 18/20W CFL/LED (essential) in existing
battan/angle holder. (Make :- Philips / Bajaj
/Wipro).
5
925
185
3.1.6 dwsd Providing and fixing brass/C.I.Stop cock of approved quality all compelte as per specification and direction of E/I.
(A) BRASS STOP COCK
(a)15 mm dia
1
243
243.99
3.1.12 Providing and fixing Gun metal full way valve of approved quality, all complete, as per specification and direction of E/I.
(e) 40mm dia and weight not less than 1.0 Kg..
2
1003
501.82
1.58.11 Providing and fixing PTMT grating of approved
quality and colour.
Circular type - 100 mm nominal dia
1
32
32.75
Cost of Drilind 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressure and equipmentsas well as fuel, lubricants and cost of transportation of rig machine
annd other vehical up to Site.
(a) From 0.00 M to 50.00 M below G.L.
100
75115
751.15
(b) From 51.0 M to125.00 M
150
129159
861.06
(c) From126.0 M to150.00 M
50
43053
861.06
23.3.3 DSR Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges,
fittings & accessories etc. all complete, for all depths,
as per direction of Engineer -in-charge.
200 mm nominal size dia
50
30532
610.65
23.12 DSR 127 Development of tube well in accordance with IS : 2800 (part I) andIS: 11189, to establish maximum rate of usable water yield withoutsand content (beyond permissible limit), with required capacity aircompressor, running the compressor for required time till well isfully developed, measuring yield of well by "V" notch method or anyother approved method, measuring static level & draw down etc. bystep draw down method, collecting water samples & getting testedin approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessoriesetc., all as per
requirement and direction of Engineer-in-charge
4
2168
542.2
23.13.3 DSR Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints
complete as per direction of Engineer in Charge.25 mm
dia
4
927
231.75
23.14.3 DSR Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with
one step CPVC solvent cement and the cost of cutting
chases and making good the same including testing of
joints complete as per direction of Engineer in
Charge.Concealed work, including cutting chases and
making good the walls etc.15 mm nominal outer dia
Pipes
4
4617
1154.45
Supplying 100mm dis submersible pump sets confirming to 8034 and motor confirming to IS 9283 pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller. Motor suitable for working on 415 + 10, 3HP, 50 Hz, AC supply with cable guard, thurst carbon/fiber bearing to withstand entire
hydraulic thurst, water proof winding shall be provided. The pump set shall be suitable for diret coupling Pump shall have suitable outlet as per manufacturers design. Anti thurst stream lined non return valve shall be provided with pump, 3 meter submersible copper conductor cable in single/double run shall be provided with each pump. Submersible pump set 100mm dia (with Polypropylene/Noryl
Impeller) up to 20 stages
2 HP
2
43711
21855.9
Supply fitting and fixing of slandered make starter pannel Board with arrangement of all necessary protection including all taxes ,royalty etc all complete job as per direction of E/I.
2
16000
8000
3 crore PVC insulated, PVC sheathed copper conductor flat submersible cable- Supplying, Flat flexible submersible cable with, copper conductor, PVC insulated and PVC sheathed. 3 core 4 sqmm
260
29380
113
Supply fitting and fixing lowering 50 mm dia G.L. collumn pipe - do - do - all complete job as per
direction of E/I.
230
82984
360.8
Carriage of Materials
-
-
-
Stone Chips Lead (lead 17.0 km)
329.48
146948
446
Stone Metal Lead (lead 23.0 km)
65.79
38095
579.02
Sand Lead (35.0 km Qty)
611.48
421351
689.07
Bricks lead 08.0 km Qty
218.59
166263
760.61
Led Solar Street Light As per Quotation
40
1830800
45770
Solid Waste Collection
42
226800
5400
Provision for Sign board & Photography
1
3000
3000
Add 12% GST
17554968
2106596
0.12
Add 1% Labour Cess
19661565
196615
0.01
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements