Jharkhand Urban Infrastructure Development Company Limited Tender
Search from across the categories, cities, and authorities to find the latest Jharkhand tenders. Every Jharkhand tender is curated from credible sources of government websites (eProcurement Jharkhand portal) and newspapers, thus ensuring the credibility of the information presented to you. For more information on Jharkhand tender bidder registration, the login process and more read the FAQs section on this page.
Costs
EMD
₹ 1,17,12,000Document Cost
₹ 25,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_JUADB_57837_1Bid Award Id
ViewTender No
JUIDCO/NIT/JTWSS/JUWSIP/475Tender Authority
Jharkhand Urban Infrastructure Development Company Limited ViewPurchaser Address
-Website
http://jharkhandtenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Providing designation 75A one brick falt soling joints filled with local sand including cost of watering royalty all complete as per building specification and direction of E/I
111.66
-
-
Providing and laying P.C.C or R.C.C. M-150 with nominal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6 mm size graded and clean course sand F.M.2.5 to 3 including screening, shuttering,mixing cement concrete in mixer and placing in position ,vibrating,striking,curing, and royalty all complete as per building specification and direction of Engineer-in-Charge.
-
-
-
M-10
65.54
-
-
M-15
139.84
-
-
M-20
56.21
-
-
Providing and laying P.C.C. or R.C.C. M-25 with nominal mix (1:1:2) in various components of dam superstructure with -do- complete job as per specification and direction of E/I.
918.61
-
-
Earth work in filling in foudation trenches & Plinth in layers not exceeding 150 mm thick well watered ,rammed ,fully compacted & fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 m & lift of 1.5 m all complete as per building specification & direction of E/I ( Mode of measurement compacted volume)
111191.39
-
-
Providing TMT reinforcement (TOR steel) 12 mm as per approved design drawing,removal of rust cutting, bending,binding including supplying an nealed wire placing MS rods in position all complete job as per specification and direction of E/I.
109.96
-
-
Providing designation 75 A brick work in CM 1:6 in superstructure with approved quality of clean coarse sand of FM 2 to 2.5 including providing 10 mm thick mortar joints,cost of screening of materials ,scaffolding ,racking out joints to 15 mm depth curing, and royalty all complete as per building specification and direction of E/I.
125.9
-
-
Providing 12 mm thick cement plaster (1:6) with clean coarse sand of FM 1.5 including screening, curing with all leads and lifts of water scaffolding and royalty all complete as per building specification and direction of E/I.
5406.8
-
-
Supplying fitting and fixing fully glazed steel door window or ventilators of standard rolled Z and mullion section and sizes as per I.S.-1038 joints met and welded with 100x16x3 mm MS lugs fixed in cement concrete (1:2:4) blocks 15x10x10 cm size including cost of oxidized iron fitting with hinges,handle per teps, catch springs 3mm thick plain glass panes with Aluminium beads and inner frame fixed with lugs of 20 mm long 6.3mm G.I.counter sunk machine screw and nuts and applying a coat of red lead paint,carriage to work site hoisting and placing in position in all storey and all complete as per building specification and direction of E/I
7.2
-
-
Supplying fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20x10x2 mm at 100 mm .Centers and braced with M.S. flat diagonals 20x3mm with top &Bottom rails of T-iron 40x40x6 mm with 38 mm dia steel pulleys complete with bolts,nuts locking arrangement stoppers handles including applying a priming coat of red lead paint,carriage hoisting and all complete as per building specification and direction of E/I.
5.76
-
-
Supplying fitting & fixing good quality ,well dressed & well seasoned sal wood work in choukhat in doors , windows , skylights , fan light and C/W celestial windows openings , including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls & lintels all complete as per building specification & direction of E/I
0.67
-
-
Supplying all materials , labours and fitting & fixing 38 mm (1.5) thick good quality seasoned sal wood battened shutter ledged & braced in door and windows with oxidized iron fitting such as hingles ,sliding door bolts , tower bolts , handles or ings hooks and eye , cleats , sand block as per schedule & royalty all complete as per building specification & direction of Engineer -in- charge.
29.21
-
-
Supplying , fittings & fixing M.S /Gril made of 20X6 mm M.S flat as per approved design & drawing properly fabricated with joints continous filllet welded and finshed smooth , carriage of grill to work site hoisting as per the building specification and direction of E/I.
73.46
-
-
Providing two coat of snowcem of approved shade and make over a coat of cement of primer on new surface including preparing the plasterded surface smooth with sand paper, scaffolding,curing and all complete as per building specification and direction of E/I.
1411.59
-
-
Providing two coat of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface thoroughly scaffolding and ,es all complete as per building specification and direction of E/I.
29.16
-
-
Providing R.S.Joist ISMB 350X140 mm size fitting and fixing in position including cutting to required in shape and size, its carriage applying a primer coat of red lead paint etc all complete as per building specification and direction of E/I. (two no. for base and one no. to pulling up of Pump)(iii) 10.50 Mx3 @ 52.40 Kg Per Metre) = 1.62 MT
-
-
-
Two nos. for Base of pump i.e. ground floor
1.08
-
-
one nos. below roof i.e. first floor
0.54
-
-
Dewatering the excavated trenches and pools of water in the building trenches/pipeline trenches,well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc.
24000
-
-
Providing & Fixing G.I.Pipe Railing having 1.0 m height consisting 50x50x6 mm thick M.S.Angles as verticals at 1.5 m c/c, and additional poles at every corner with three rows of 25 mm dia G.I.pipes of medium class variety as horizontal &painting three coats of oil paint over 1 coat of anticorrosive paint of approved colour & shade including cost of all labour, transporting bends to urved shape,etc. complete.
440
-
-
Supplying fitting & Fixing M.S. grill gate with M.S. grills made 20x6mm M.S. flat or 16mm M.S. square bars fitted 25x25x6 mm M.S. angle frame of size 60x60x6 mm including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C (1:2:4) blocks of required size, applying a priming red lead paint over steel work , ,es all complete as per drawing specification and direction of E/I.
240
-
-
Providing designation 75 A one brick on edge flooring in C.M (1:4)with top surface flush approved quality of clean coarse sand of F.M 2 to 2.5 including the cost of screening ,raking out joints to 15 mm depth , curing es,royalty all complete as per building specification and direction (E/I)
38.23
-
-
Providing all materials , labours & doing 3( three ) coat white washing with approved quality of lime over the new surface including the cost of cleaning surface thoroughly and removing the scales of smoke & ash marks with jhama rubbing ,scaffolding washing of floor sand all complete as per building specification and direction of E/I
273.17
-
-
Providing all materials,labours & doing 2 (two ) Coat colour washing over a coat of white wash with approved quality of lime & Colour over the new surface including the cost of clening surface thoroughly and removing the scales of smoke & ash marks with jhama rubbing , scaffolding washing of floor sand all complete as per building specification and direction of E/I
227.02
-
-
Providing two coats of painting with readymix paint over a coat of primer of approved shad and make over new wooden surface after cleaning, removing dirt scales ,smokes,grease and sand papering including cost of scaffolding all complete as per building specification & direction of E/I
65.71
-
-
Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning , removing rust ,dirt ,scales ,smokes and grease and cleaning the surface thouroughly including cost of scaffolding all complete as per building specification and direction of E/I
23.32
-
-
Providing 2(two) coats of Paniting with ready mixed paints of approved shade & make over steel surafce including cleaning the surface thouroughly , scaffolding & es all complete as per building specification & direction of E/I
29.32
-
-
Supplying materials and labours for constructing inspection chamber of designation class 75-B bricks size 750 mm deep, 600 mm x 450 mm internal dimension having 250 mm wall thickness in cement mortar (1:6) including 12 mm cement plaster (1:4) with punning on side and cement plaster (1:6) with 600 mm x 475 mm G.I. cover with frame (weight not less than 36Kg.) along with earth work in excavation and 80mm thick PCC- (1:3:6) in foundation and refilling all complete as per specification and direction of E/I..
5
-
-
Providing brickbats of 90 mm to 45 mm size of approved quality in the gap between wall of the pit and earth including cost of materials, labours, royalty, cairrage at site etc all complete as per standard specifications and direction of the E/I.
1.27
-
-
Supplying, fitting and fixing vitreous white glazed earthen ware I W C of Perry Hindustan or any other iSS approved make with 100mm HC.I. ‘P’ TRAP (15) Liters C.I. pull and let go flushing C.I.stern of names or other iSS equivalent make, complete with all fittings, C.I. or C.C. brackets 32 MM alkathenae PVC telescopic flush, pipe about 2m long with one brass coupling and clamps G.I. Chain and pull including supplying and fixing a pair or vitreous white glazed earth ware footrest to be fixed in floor 15mm C.I. body brass spindle stop cock of weight not less than 50Gms., 15mm PVC Connection pipe 450 mm Long and the exposed pipe and C.I.stern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I.
2
-
-
Supplying fitting and fixing vitreous white glazed earthen ware wash hand basin of Perry of Hindustan or any other iSS approved make supported on painted C.I. or RS Brackets 32mm C.I. brass waste 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grams 32mm PvC waste pipe 750mm long with brass coupling at one end and making plumber joints etc all complete as per specification and direction of E/I.
2
-
-
Supplying S.W.R.U.P.V.C. pipes of approved make (Prinnc,Sudhakar or aqivalent aproved make) including Supplying labours tools and tackles, lubricant etc. for laying and jointing all es,carrige etc complete as per specification and direction of E/I.
-
-
-
1) 110mm dia
-
-
-
10' (3 M) long double socket
2
-
-
4' (1.2 M) long double socket
2
-
-
2' (0.6 M) long double socket
4
-
-
2) 75mm dia
-
-
-
10' (3 M) long double socket
2
-
-
4' (1.2 M) long double socket
2
-
-
2' (0.6 M) long double socket
4
-
-
Supplying SWR P.V.C fitting and louber,tools and equipments for laying of all size SWR fitting and fixing in trainches/on wall etc all complete as per direction of E/I
-
-
-
110mm dia
-
-
-
Coupler
3
-
-
Door tee
2
-
-
Plain bend
2
-
-
Door bend
2
-
-
Door Y
2
-
-
Pipe clip
4
-
-
Vent cowl
1
-
-
Rubber ring
32
-
-
Door Gasket
6
-
-
75mm dia
-
-
-
Coupler
3
-
-
Door tee
2
-
-
Plain bend
2
-
-
Door bend
2
-
-
Door Y
2
-
-
Pipe clip
2
-
-
Rubber ring
30
-
-
Round jali
2
-
-
Nahani trap with jali
4
-
-
110mm X 75mm dia
-
-
-
P. trap(110X110mm)
2
-
-
Reducer(110X75mm)
4
-
-
Solvent cement
2
-
-
Supplying centrifugally cast (spun) ductile iron pressure pipe for water supply with socket and spigot ends confirming to IS8329/2000 in standard lengths of class K-9 suitable for push on joint (Rubber gasket jointing) with cement mortar lining on inside surface and outside zinc coating with bituminous paint including all other es insurance carriage to work site with loading Unloading etc stacking including inspection charges and all es all complete. one no. gasket with each pipe.
-
-
-
DI - K9 Dia 150 mm
71
-
-
DI - K9 Dia 200 mm
1854
-
-
DI - K9 Dia 250 mm
167
-
-
DI - K9 Dia 300 mm
137
-
-
DI - K9 Dia 400 mm
4117
-
-
DI - K9 Dia 450 mm
378
-
-
DI - K9 Dia 500 mm
1091
-
-
DI - K9 Dia 600 mm
1345
-
-
DI - K9 Dia 700 mm
14596
-
-
Supplying Labours Tools and Tackles for Testing of Lead CI or UPVC or HDPE or AC or DI pressure Pipe upto 60 m head of water all complete as per specification direction EI.
-
-
-
DI - K9 Dia 150 mm
71
-
-
DI - K9 Dia 200 mm
1854
-
-
DI - K9 Dia 250 mm
167
-
-
DI - K9 Dia 300 mm
137
-
-
DI - K9 Dia 400 mm
4117
-
-
DI - K9 Dia 450 mm
378
-
-
DI - K9 Dia 500 mm
1091
-
-
DI - K9 Dia 600 mm
1345
-
-
DI - K9 Dia 700 mm
14596
-
-
Providing and supplying ISI standard D.I. specials & fitting with sealing rubber gasket of S.B.R. complete with cast iron follower gland and M.S. nut & bolts coated or otherwise protected from rusting and suitable for D.I. pipes complete as per I.S.9523 Class-K-12.
526451.4
-
-
Providing Double Flanged Sluice valve confirming for IS 2906/14846 including worn gear arrangements as per test pressure stainless steel spindle, caps including all transportation etc. complete.(without by-pass Arrangement-P.N-1.6)(With E.D)
-
-
-
DI - K9 Dia 200 mm
2
-
-
DI - K9 Dia 250 mm
6
-
-
DI - K9 Dia 300 mm
2
-
-
DI - K9 Dia 400 mm
6
-
-
DI - K9 Dia 450 mm
2
-
-
DI - K9 Dia 500 mm
4
-
-
DI - K9 Dia 600 mm
6
-
-
DI - K9 Dia 700 mm
15
-
-
Providing and supplying Air Valves as per IS-14845-2000 standard specifications of approved make and quality of following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck,transportation upto departmental stores,unloding and stacking in all respect etc. complete.
-
-
-
50 mm Dia.
2
-
-
Providing and supplying Air Valves as per IS-14845 standard specifications double orifice type combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance,third party inspection charges, loading, unloading ,transportation upto departmental stores.
-
-
-
80 mm Dia.
8
-
-
Providing and supplying Air Valves as per IS-14845-2000 standard specifications double orifice type combined with isolating sluice valve, mounted in horizontal position and operated by wheel gearing, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unloading,transportation upto departmental store,
in all respect etc.
-
-
-
100 mm Dia.
22
-
-
Raw & Clear Water Rising Main
-
-
-
Supplying labours ,tools,tackles lubricant etc for laying and jointing DI/ C.I.S/S Tyton pipes (class LA) trenche supplying rubber gasket (Rubber gaskets confirming to I.S.S.-5382-1969) and making gasket joints including providing night guard,barrier and red light to safe guard against accident ,all complete (Pipe to be supplied departmentally free of cost and laying of pipes is to be done as per (I.S.S. 3114-1985)as per design, specification and direction of E./I.without gasket.
-
-
-
DI - K9 Dia 150 mm
71
-
-
DI - K9 Dia 200 mm
1854
-
-
DI - K9 Dia 250 mm
167
-
-
DI - K9 Dia 300 mm
137
-
-
DI - K9 Dia 400 mm
4117
-
-
DI - K9 Dia 450 mm
378
-
-
DI - K9 Dia 500 mm
1091
-
-
DI - K9 Dia 600 mm
1345
-
-
DI - K9 Dia 700 mm
14596
-
-
Lowering,laying and fixing in proper alignment and position all types of C.I.air valves as directed by Engineer –in–charge including cost of conveyance from store to site of work,cost of all material and giving satisfactory hydraulic testing etc.complete.(for all class of valves).
-
-
-
50 mm Dia.
2
-
-
80 mm Dia.
8
-
-
100 mm Dia.
31
-
-
Supplying Labourand tools for fixing C.I.sluice valve in trenches with a pair of C.I.Tail piece including making lead caulked joints and flanged joints as per I.S.S. specification, including supplying all jointing materials (Pig lead confirming to I.S.S. 782-1978, yarn confirming to I.S.S. 6587– 1972 and nuts and bolts confirming to I.S.S. 1364 – 1983) including drilling holes in flanges if required as per specification and direction of E/I.(Sluice Valve and Pieces to be Supplied Departmentally Free of Cost)
-
-
-
DI - K9 Dia 200 mm
2
-
-
DI - K9 Dia 250 mm
6
-
-
DI - K9 Dia 300 mm
2
-
-
DI - K9 Dia 400 mm
6
-
-
DI - K9 Dia 450 mm
2
-
-
DI - K9 Dia 500 mm
4
-
-
DI - K9 Dia 600 mm
6
-
-
DI - K9 Dia 700 mm
15
-
-
Providing ,supplying & laying ISI standard C.I. specials & fitting with 600 mm dia double flanged tail piece 2 nos , wheel stand 2 nos. , CI strainer (surface area 3.50 sqm ) 2 nos. , 32 mm Dia rod approx 11 m long complete with M.S. nut & bolts coated or otherwise protected from rusting and suitable etc all complete.
1910
-
-
Supplying materials and labou for fixing 20m dia M.S.bar steps in stening wall of 0.30 m intrenal and staggered in (1:2:4) cement concrete including scaffolding and curing etc.all complete as per specifiction and Direction of E/I.
50
-
-
Providing, constructing coffer dam in river basin
/ dam storages as per type design including
excavation, filling, the middle portion with B. C. soil (in gunny bags if requried). Providing impervious / semipervious materials on both side of B.C. soil (in gunny bags if required) including ramming, compacting to the satisfaction of Engineer-in-charge, till the complection of work including dismantling coffer dam after completion of works and disposing off the material as directed by the Engineer-in-charge.
1388
-
-
Supply and delivery of Vertical water/oil lubricated statically, dynamically , hydraulically balanced turbine pump capable of discharging the following duty condition as given below due to all causes with surface discharge head confirming to IS 1710 and as amended as on date with accessories as per IS 5120/1977 ( Reaffirmed 2011 ) and as amended thereafter to suit the site condition. The speed, Number of stages, sizes of column pipes and line shaft indicated is based on site condition prevailing during investigation. The pump should be supplied with non reversible ratchet pin housing safety clutch, suction strainer etc. The Pump Bowl assembly shall be with bronze impeller running at 1450 RPM. The pump includes suitable head shaft, suitable 1.5 meter long SS line shaft required Nos. to suit the well depth, Rubber line shaft bearing of required Nos., C.I Bearing retainer of required Nos., 100 liter HDPE Pre- lubricating tank with 20mm PVC Rigid pipe connection along with GM gate valves, Suitable ERW column pipe of each 1.5m long of required Nos. to suit the well depth, Suction bell mouth of suitable size, M.S. clamps suitable for column pipe/line shaft -2 set and Spanner - 1 set etc. complete.
-
-
-
Discharge- 7480 LPM and Head- 20 m (1W+1S) (approx. 60 HP)
2
-
-
(Discharge-7887.5 LPM,Head- 85 M 205 HP.)
6
-
-
Discharge- 1170 LPM and Head- 64 m (1W+1S) (Approx 30 HP)
2
-
-
Add 7.5% extra for each 1.5 m length column pipe assembly in the above rate.
9.5
-
-
Panel: Supply, erection, installation, testing and commissioning of Main Power Distribution Panel cum MCP to be installed in Pump House. Floor mounted cubical LT Motor Control Panel board fabricated with MS sheet of suitable gauge and size, dust and vermin proof and duly painted with two coats of super enameled paint of approved colour one coat of red oxide primer, consisting of proper power distribution 4 pole 630A copper busbar, 1 no. incoming feeder of 630A MCCB, 3 nos. outgoing feeder of 250A MCCB for pumps sets, 1 no. 250A MCCB for Spare feeder [ MCCB make:L&T/ Siemens/Schneider/ Havel's], 2 no. 32A & 1 no. 63A MCB for lighting and electrical utilities, 3 nos. suitable fully automatic star delta starter (make-L&T/Jyoti/SIEMENS/SCHNIEDER) suitable for required HP, switch disconnected isolator (TPN) rated (630A-415V), selector switches, Volt-meters, Ampere-meters, indicator lamps etc. all complete with internal wiring, protection units/relays and APFC panel with suitable capacitor banks of proper KVAR for Power Factor control. Including the cost of internal and external lighting by doing wiring and installing luminaries e.g. suitable Wattage LED light fittings with standard lumen in pump house, gangway etc. all complete for pumping plant.
1
-
-
Cable: Power wiring with required 400 Sq mm 3.5 core 1.1KV grade armoured Aluminum Cables XLPE/PVC insulated armoured cable from Transformer to Main Power Distribution Panel (MCP) at Pump House. Including laying, jointing and making proper terminations, etc. all complete.
490
-
-
Cable: Power wiring with required 95 Sq mm 3 core 1.1KV grade armoured Copper cables from Main Power distribution Panel (MCP) to Motors & Staters at Pump House. Including laying, jointing and making proper terminations, etc. all complete.
165
-
-
Earthing: making earthing as per IE Rule for each motors.
5
-
-
Lightening Arrestor: Supplying, erecting approved make of Lightening Arrestor with necessary ancillary material complete for pumping plant as per IE rule.
2
-
-
Crane: Providing, erecting triple spur gear type Chain Pulley Block suitable for 3 Tone capacity as below with 6 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per IS 3832 carrying ISI mark.
2
-
-
Transformer: Providing, erecting and commissioning out door type copper wound transformer (make- Kirloskar/ Schneider/ ABB / CGL/BHEL) continuously rated for 3 Ph, 50 Hz, at full load and temp. rise not exceeding 45º Cby thermometer in oil and 50ºC by the resistance in
winding after continuous run at full load rating, the transformer should have oil immersed winding having vector group DY 11, HT side connected in Delta and LT side connected in Star with neutral brought out connected to provided separate earthing. The transformer shall have power terminal arrangement, bushings/cable end box on HT side and cable end box on LT side. 2 Nos. channels with stoppers shall be
provided and fixed on the provided plinth for mounting the transformer. The transformer should have following standard fittings. Transformer shall be of latest manufacturing standards as per amended IS specifications and the Load & No Load losses shall be limited to the values given below or as per IS or Norms issued by JSEB whichever are lower.
-
-
-
750 KVA (11/.433 KV)
1
-
-
1250 KVA (11/.433 KV)
1
-
-
Cost of Supply, erection, installation, testing, commissioning & construction of DP structure & pcc foundation plinth and providing safety arrangements with suitable no. of required poles etc. with different type of MS channels, M.S. angles, brackets, insulators, AB Switch, three set of horn gap fuse, DO Fuse, lightening arrester, stay sets, barbed wire, danger board, nut bolts, fabrication work required for the job, cost of providing earthing for transformer with all required material, labours, tools & tackles cost of providing disc & pin insulator for HV and LV side of the transformer, testing of dielectric strength of transformer oil etc. for transmission of power. All complete job as per I.E. rules and specification of Jharkhand state electricity board.
2
-
-
HT Line: Cost for provision of 11 KV HT Overhead Electric Insolated feeder line including cost of drawing 11 KV HT line up to Proposed substation from the nearest available power source, etc. all complete from JSEB.
20
-
-
Power Connection - Cost of taking power connection with metering from JSEB etc. all complete
3
-
-
Panel: Supply, erection, installation, testing and commissioning of Main Power Distribution Panel cum MCP to be installed in Pump House. Floor mounted cubical LT Motor Control Panel board fabricated with MS sheet of suitable guage and size ,dust and vermin proof and duly painted with two coats super enameled paint of approved colour one coat of red oxide primer, consisting of proper power distribution 4 pole 500A copper busbar, 1 no. incoming feeder of 500A MCCB, 3 nos. outgoing feeder of 200A MCCB for pumps sets, 1 no. 200A MCCB for Spare feeder [ MCCB make:L&T/ Siemens/Schnieder/ Havell's],2 no. 32A & 1 no. 63A MCB for lighting and electrical utilities, 3 nos. suitable fully automatic star delta starter (make-L&T /Jyoti /SIEMENS /SCHNIEDER) suitable for required HP, switch disconnected isolator (TPN) rated (500A-415V), selector switches, Volt-meters, Ampere-meters, indicator lamps etc. all complete with internal wiring, protection units/relays and APFC panel with suitable capacitor banks of proper KVAR for Power Factor control.
1
-
-
Supplying transporting, the S.P. fire hydrants including duck foot bend, S.V. and S.V. road box, painting the hydrant,fixing the saddle piece, supplying, and laying
required length of C.I. pipeline and jointing the same spun yarn,molten lead including caulking,
fixing the S.V. road box in one brick masonry chamber in 1:5 C.M. with 12 mm thick 1:3 cement plaster both inside and outside on 1:3:6: C.C.150 mm thick etc, complete specified and directed.
[As per I.S.900/1965 Revised]
1
-
-
Providing and supplying GI pipe including all carriage , royalty.
-
-
-
25 mm dia (delievery)
110
-
-
20 mm dia (Rising)=20x2
40
-
-
15 mm dia (delievery)=15x2
30
-
-
Supplying and fixing of G.M ferrule of approved make in existing CI main including drilling and taping CI main all complete as per specification and direction of Engeer-in-Charge . 3 mm,6 mm, 10 mm. dia ferrule weight not less than 425 gram.( 10 mm dia)
3
-
-
Providing and fixing gun metal full way valve of approved quality, all complete as per specification and direction of E/I.
-
-
-
25 mm dia (delievery) (weight not less than 500gms)
2
-
-
20 mm dia (Rising) (weight not less than 400gms)
1
-
-
supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I.
-
-
-
Elbow (25 mm dia)
18
-
-
Elbow (15 mm dia)
6
-
-
Elbow (20 mm dia)
4
-
-
Tee (25 mm dia)
4
-
-
Reducing socket (25 mm dia)
6
-
-
Plugs ( 25 mm dia)
1
-
-
Nipple (25 mm dia)
6
-
-
Nipple (15 mm dia)
8
-
-
Nipple (20 mm dia)
4
-
-
Union socket (25 mm dia)
2
-
-
Union socket (15 mm dia)
4
-
-
Union socket (20 mm dia)
2
-
-
socket (25 mm dia)
8
-
-
socket (15 mm dia)
12
-
-
socket (20 mm dia)
6
-
-
Making long screw in G.I. pipe including supplying and fitting jam nuts and extra socket etc. all complete as per specification and direction of E/I.
-
-
-
25 mm dia (Delievery)
3
-
-
20 mm dia (Rising)
2
-
-
Laying of G.I. pipes of approved make in trenches with red lead and yarn with socket and screw joints and cutting pipe so size and threading ends where necessary etc. all complete as per specification and direction E/I. (Pipes to be supplied departmentally free of cost)
100
-
-
20 mm dia (Rising)
20
-
-
Supplying labour and tools for fixing G.I. pipes with red lead and yarn of following nominal bore with screwed and coquetted joints on wall , calling and floor including supplying and fitting of wall hooks or pipe clamps, wo-iDen plugs, cutting pipe to size and threading ends if required etc. all complete as per specification and direction of enG.I.neer in charge (pipe with socket to be supplied departmentally free of cost)
-
-
-
15 mm dia (delievery)
30
-
-
20 mm dia (Rising)
20
-
-
25 mm dia (delievery)
10
-
-
Providing and fixing 15mm dia male ended C.I. body brass spindle valve and seat bib clock of approved quality (wt- Not less than 400Gms. ) With extra socket all complete as per specification and direction E/I.
8
-
-
Cutting chajja or cornice for lying G.I. Pipe and restoring the same with R.C.C. (1:2:4) brick work in cement mortar (1:4) and cement plaster (1:4) as per specification and direction of E/I.
4
-
-
Making holes in walls for laying G.I. pipes and restoring the same after pipe laying as per specification and direction of E/I.
-
-
-
125 mm thick wall
4
-
-
250 mm thick wall
4
-
-
Polythene water storage tank of ISI mark (e.g. sintex /sinter/himgiri/gangotri etc.) with cover and locking system. Including carriage, installation charge.(2 nos X500 lit).
1000
-
-
Wiring for light point / exhause fan / call bell / point with 1.5 sq mm Fr PVC insuatled copper condutor single core cable in surface / recessed PVC conduit ith piano type switch, phenolic laminated sheet, sutiable sizezs PVC / G.I box as reqd.
-
-
-
a) Group A (for two in one )
18
-
-
Wiring for circuit / submain wiring along with earth wire with the folloing sizes PVC insulated copper conductor , single core cable in surface / recessed PVC conduit as reqd.
-
-
-
a) 2x2.5 sq mm + 1x2.5 sq mm earth wire (M.C.B. to board)
40
-
-
b) 2x4.0 sq mm + 1x4.0 sq mm earth wire (Main to M.C.B. light)
20
-
-
c) 2x6.0 sq mm + 1x6.0 sq mm earth wire (Main to M.C.B. Power)
6
-
-
d) 1x1.5 sq mm (for inverter wiring)
100
-
-
S/F Suitable sizes G.I/PVC box on surface or in recess with phenolic liminated sheet cover in front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps piano type switch connection, painting etc as reqd.
2
-
-
S/Fsuitable, size G.I./PVC. Box on surface or in recess with the phenolic liminated sheet cover in front including providing and fixing 6 pin 15/16 Amp socket outlet and 15/16 Amps piano type swich connection painting etc. as reqd.
-
-
-
6x3
2
-
-
S/f following way single pole neutral,sheet MCB distribution board,240 volts on surface/recess,complete with tinned copper busbar,neutral busbar,earth bar,detachable gland plate, interconnections,Phosphatized and powder painted including earthing etc.as reqd.(but without MCB/RCCB/Isolator)
-
-
-
a) 2 way singlle door (2x3)
6
-
-
b) 4 way singlle door (2x3)
2
-
-
S/F 6 Amp to 32 Amp rating 240 volts "B" series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connection testing commissioning etc.
6
-
-
Providing and fixing following capacity double pole/TP & N sheet metal switch sisconector fuse unit in existing metal board with rewireable type fuses, including drilling holes in metal board,making connection,etc
-
-
-
a) 32 Amp. Double pole (1x3)
2
-
-
Supplying and fixing batten/angle holder including connection etc.
16
-
-
S/F 2 pin 5 Amp. Ceiling rose on the existing junctionbox /wooden block including connection.
-
-
-
1 Nos
2
-
-
S/F following piano type switch/socket on the existing switch box cover including connection etc.
-
-
-
a) Electronic step fan regulator,mini.
2
-
-
S/F PVC/G.I. box of following sizes on surface or in recess with suitable size sheet cover,etc.
-
-
-
a) 4"x4"
16
-
-
b) 4"x7"
4
-
-
c) 6"x8"
4
-
-
d) 8"x10"
6
-
-
Earthing with G.I. earth pipe 4.5 mtr. Long,40 mm dia including accessories,and proving masonery enclosur ewith cover plate having locking arrangement and watering pipe etc. as per reqd.(but without charcol or coke and salt)
2
-
-
Extra for using salt and charcol for pipe earth electrodes as reqd.
2
-
-
Supplying and laying 8 SWG copper wire 0.50 mtr. Below ground level for condutor earth electrode,including soldering etc.
40
-
-
Supplying and fixing following ratting,double pole 240 volts isolator in the existing MCB DB complete with the connections, testing and commissioning etc.
-
-
-
a) 40 Amps
2
-
-
b) 63 Amps
2
-
-
S/F LED bulb with all necessary etc. as reqd.(9 watt)
16
-
-
S/F ceiling fan 48" make Usha/Ortem/Orient with regulater and all accessories including complete.
2
-
-
Pushing of M.S. pipe of following dia for road crossing and Railway crossing by push through method in all types of strata by using hydraulic jack and drilling machine of required diameter, below 3.0 m depth including lowering, laying, jointing of M.S. casing pipe including cost of labour fuels and material, required welding machinary, tripod, chain pulley block, vrane, blower etc. transportation and dewatering etc. complete as diredeted by Engineer-in-charge but excluding cost of M.S. pipe
-
-
-
a)For 100 mm dia DI pipe -250 mm dia 12 mm thick casing pipe (2 Nos.) (40 M)
80
-
-
b)For 150 mm dia DI pipe -300 mm dia 12 mm thick casing pipe (3 Nos.) (40 M)
120
-
-
c)For 200 mm dia DI pipe -350 mm dia 12 mm thick casing pipe (2 Nos.) (40 M)
80
-
-
d)For 300 mm dia DI pipe -450 mm dia 12 mm thick casing pipe (5 Nos.) (40 M)
200
-
-
e)For 400 mm dia DI pipe -550 mm dia 12 mm thick casing pipe (4 Nos.) (40 M)
160
-
-
f)For 500 mm dia DI pipe -650 mm dia 12 mm thick casing pipe (2Nos.) (40 M)
80
-
-
g)For 700 mm dia DI pipe -850 mm dia 12 mm thick casing pipe (1Nos.) (40 M)
40
-
-
Conventional Water Treatment Plant 35.50 MLD
-
-
-
Designing (aesthetically),providing constructing and commissioning conventional Water Treatment Plant consisting of all civil ,Mechanical and Electrical works including cost of providing and applying Epoxy paint to inside surface of water retaining structures in contact with chlorine and providing ant termite treatment to entire structure below ground level ,Mechanical and Electricals components of various sub works as given below ,including necessary hydraulic testing ,structural testing ,equipment testing and trial run for 3 months,etc. complete as directed by Engineer -in-charge.(Turn-Key Job).
-
-
-
Aeration fountain: Plan area is not less than 0.625 sq mt per MLD.
-
-
-
Venturi Flume : With necessary device, consisting of simple mechanical indicator (Pedestal type gauge).
-
-
-
Flash Mixer :Rapid mixing device, detention time 60 seconds to give velocity gradient 300 to 400 sec-1 vane mixer type confirming to IS 7090 of 1985
-
-
-
Flocculator : Confirming to I.S. 7208 - 1974 (Type -C) with detention period of 30 minutes.
-
-
-
Clarifier : -Horizontal flow circular tank , detention period 2.5 hours ,overflow rate 30 cube meter per square meter per day (to be specified) , weir loading not more than 300 cubic meter per day , with mechanical sludge scraper confirming to IS 10313_1982 with necessary inlet outlet arrangement.
-
-
-
Rapid sand Filters and Filter House :-Filter designed for filtration rate of 5000 liters per square meter per hour ,minimum 2 beds for plant up to 10 MLD for larger plants as specified, filters to be located in filter house with roof slab, pipe gallery and platform minimum 5.5 meter in width. With constant rate filtration or declining rate filtration.
-
-
-
Filter Sand: Effective size 0.45 to 0.70 mm uniformly coefficient not more than 1.7 ,not less than ,depth of water over sand 0.75 m ,free board 50 cm ,gravel 0.45 m in depth ,sand and gravel confirming to I.S.8491 (i)-77 ,back wash by air wash ,standard appurtenances (to be specified ) ,rate of flow controller ,filter gauge ,sand expansion gauge ,etc.
-
-
-
Wash Water Tank: - Capacity to be specified and suitable to supply water to wash specified number of filter beds at a time 12 minutes @ 600 lit/sqm/min ,under a head of 12 m at under drain.
-
-
-
Wash Water Pumps: - Capacity to fill water tank in 1 hour with 100% standby.
-
-
-
Air Blowers: - Capacity of delivering 600 LMP per square meter of free air , of filter area at 0.4 kg/sq.cm at the under drains (100% stand by) for period of 5 min.
-
-
-
Chemical house in two storey's
-
-
-
Ground floor to accommodate 7 days alum requirement and sundry storage.(Minimum 4 m height)
-
-
-
First floor to accommodate alum and lime tanks. Chain pully block etc.(Minimum 5 m height)
-
-
-
Solution Tanks: - Minimum 3 tanks (one for preparation ,second for dosing and third as stand by) , each tank capable of giving 8 hours maximum dose without interruption ,minimum free board 0.30 m ,trays for dissolving level indicator ,mechanical agitation devices , solution feed and drain lines ,solution feed device (Constant head device ,strength of solution up to 10% only ) confirming to I.S.9222 Part-I 1979.
-
-
-
Pure Water Sump and Pump House
-
-
-
Capacity of Sump :-One hour of designed flow.
-
-
-
Pump House: - Pump House of required size over the sump or by the side.
-
-
-
Store House: - Suitable for alum storage of three months and 7 days temporary storage ,7 days TCL requirement in mansoon with 20% extra capacity for other sundry articles.
-
-
-
Vacuum feed type chlorinators-
-
-
-
Confirming to I.S.10533-A Part II 1983.
-
-
-
Rate for withdrawal
-
-
-
Temperature Kg. of Chlorine discharge per day
-
-
-
Degree "C" Cylinders
-
-
-
45 67 Tones
-
-
-
10 6.35 9.50 110
-
-
-
15 10.75 16.10 130
-
-
-
20 14.50 21.24 254
-
-
-
2 & above 18.70 28.12 315
-
-
-
Chlorinator equipment and container room to confirm to I.S.10553 Part -I 1983.
-
-
-
100% stand by shall be provided.
-
-
-
By pass arrangements C.I or M.S Pipes (i) By passing all units of T.P. , (ii) By passing flash mixture ,clariflocculator . ,(iii) By passing flash mixture , clariflocculator & filter units.
-
-
-
Disposal of waste from WTP: Safe disposal arrangement to nearby nalla including cost of pipe.
-
-
-
Drainage Arrangements - To decant all units of WTP with CI pipes up to boundary of each unit and further extension with RCC pipes to nearby nalla.
-
-
-
Electrical Installation - Both internal and external including entire plant area.
-
-
-
Laboratory Equipment- As per requirement (to be specified during tendering)
-
-
-
Sanitary Blocks- Carpet area 15 square meter minimum up to 25 MLD and 25 square meter above 25 MLD.
-
-
-
Administrative block and internal road- To accommodate office room ,chlorine room ,laboratory room panel board room , blower room etc. and WBM road to connect all units from main gate of plot.
-
-
-
Rates given below are inclusive of uplift pressure if any and dewatering during entire work.
-
-
-
Cost of 20 MLD treatment Plant
1
-
-
Add capacity above 20 MLD up to 50 MLD.
15.5
-
-
Eelevated Service Rreservoirs
-
-
-
Designing (aesthetically),and Constructing RCC Eelevated Service Rreservoirs of following capacity with RCC staging consisting of columns,internal and external bracings spaced vertically not more than 4.5 meters centre to centre of E.S.R having capacity above 500 m3 & not more than 6 m c/c of E.S.R having capacity 500 m3 including excavation in all types of strata,foundation concrete,cement plaster with water proofing compound to the inside face of the container including refilling disposing of the surplus stuff within a lead of 50 meters,all labour and material charges including lowering, laying, erecting hoisting and jointing of pipe assembly of inlet, outlet, washout,overflow and bypass arrangements as per departmental design providing and fixing accessories such as M.S ladder,C.I.manhole frame and covers water level indicators, lightening conductor,G.I pipe railing around walk way and top slab,providing spiral stairs case from ground level to roof level,M.S Gril Gate of 2 Mtrs height with locking arrangement,of approved Design B.B Masony Cambers for all valves,ventilating shafts providing and appling three coats of cement paint to the structure including roof slab and epoxy paint to internal surface and anti-termite treatment for underground part of the structure and giving satisfactory water tightness test as per I.S. code.The job to include painting the name of the scheme and other details on the reservoir as per directions of Engineer-in-Charge.
-
-
-
The Design of the structure be in accordance with relevant (I.S.3370-2009 or revised)
-
-
-
The design shall satisfy the stipulation as per IS 1893-1984 and I.S.13920/1993 for seismic force and I.S.-11682/1985 for R.C.C.staging of overhead tanks.
-
-
-
For design having more than 6 columns, providing of internal bracing is obligatory, External bracing is also obligatory.
-
-
-
The entire structure shall be in M/250 mix only.However concrete in contact with water such as container,base slab,wall,roof slab & footing in water borne area shall be M-300.
-
-
-
Plain round mild steel bars grade-I confirming to I.S., 432 Part-I or high yield strength deformed bars confirming to I.S. 1786 or I.S.1139 shall be used, grade-II mild steel bars will not be allowed.
-
-
-
Irrespective of the type of foundation proposed in the design,one set of bracing be provided at the ground level.
-
-
-
These rates are include providing ,M.S ladder for E.S.R's upto 2 lakhs Liters Capacity and Providing spiral staircase for E.S.R. above 2 lakhs liters capacity.
-
-
-
Staging shall be designed with stresses of M-200 for ESR. However all RCC construction should be done in M-250 extra Concrete in contact with water shall be designed & constructed in M=300
-
-
-
These rates are including the cost of uplift pressure if any and entire dewatering during execution.In case of water logging area where water is struck at shallow depth extra" provision of dewatering shall be made as per site condition.
-
-
-
All condition given in the Member Secretary"s Circular No. MJP/TS-I/350/1668 dt.2.08.97 and MPJ/S-I/350/2127 dt. 13.7.99 shall be strictly followed and additional cost,if any due to these conditions is included in the rates mentioned below.
-
-
-
ESR-2 (2410KL, Staging - 19M)
1
-
-
ESR-5 (2340KL, Staging - 24M)
1
-
-
ESR-7 (2000KL, Staging - 24M)
1
-
-
ESR-8 (1020KL, Staging - 24M)
1
-
-
SUMP
-
-
-
Designing (aesthetically) and constructing RCC ground service reservoirs / RCC sumps in M-300 mix . Of required capacity including excavation in all types of strata , foundation concrete , container wells, bottom slab top RCC roof slab / or dome , 20 mm thick cement plaster with water proofing compound in CM1:3 proportion to inside face of the container, including epoxy paint from inside including refilling and disposing of surplus stuff within lead of 50 M, all labour and material changes for laying and jointing of pipe assembly for inlet , outlet washout , over flow and bye -pass arrangement consisting of C.I/ M.S D/.F pipes , specials and valves of gavin diameter,provinding and fixing accessories such as M.S ladder inside and outside ,C.I Manhole frame and cover, at top slab,B.B masonry chamber for all valves ,ventilating shafts ,including giving satisfactory hydraulic test and water tightness test as pes IS code and providing three cost of cement paints to all expose surface of structure including roof surface etc. complete as per design data ,criteria ,obligatory requirements and detailed specifications.
-
-
-
Anti - termite treatment shall be givien for under ground portion of the structure.
-
-
-
Note
-
-
-
The designing shell be in accordance with various relevant I.S specification (I.S 456/2000, I.S 3370-1965 or revised)
-
-
-
Only M.S bar grade I conforming to I.S 432 part -I or high yield strength deformed bars conforming to I.S 1786 or I.S 1139 shall be used Grade -II M.S bars shal not be used.
-
-
-
Entire Structure shell be in M-300
-
-
-
The scope of pipe assembly work shall be upto 5 m beyond out side face of the well , cost of pipe valves and specials is not included in the rate but leber cost for laying and jointing is included.
-
-
-
The G.S.R / Sump above 15 laks liters capcity shell be in two compartment .
-
-
-
The job includes designing the structure for up lift pressure and dewatering if required during entire execavted stuff within lead of 50 m as directed by Engineer -in-change . If up lift considered in design , then these rate shell be increased by 7.5%.
-
-
-
G.S.R outlets shell be with bell mouth of approved pattern in bottom slab and cost of designing bell mouth is included in the rate .Sump well includes cost of suction pit required at bottom.
-
-
-
for pipe diameter upto 300 mm only C.I pipe and C.I specials shell be used. Four pipe diameter above 300 mm ,M.S. pipe and specials minimum 10 mm thick be used with proper anti corrosive epoxy treatment from inside and outside.
-
-
-
Cost of pump house is not included in these rates .
-
-
-
Above rates are applicable for sismic Zone 2, 3 and 4 .
-
-
-
75% part shall be payable for reinforcement, concrete and plastering items of all types of G.S.R.s and sumps till satisfactory hydraulic testing for water tightness test is given and till that work shall be treated as incomplete.
-
-
-
cost of 3,00,000 litres capacity
1
-
-
Add for Capacity Above 3,00,000 litres Upto 5,00,000 Literes
1
-
-
Puuca Road ( Except black top only taken out material to be used ) for cutting road as per requirement. Assuming 40% of total road cutting.
4387.46
-
-
Water bound Macadam road ( taken out material will be used ) for cutting road as per reuirement .
3290.6
-
-
Supplying centrifugally cast (spun) ductile iron pressure pipe for water supply with socket and spigot ends confirming to IS 8329 /2000 in standard lengths of class K-7 suitable for push on joint ( Rubber gasket jointing) with cement mortar lining on inside surface and out side zinc coating with bituminous paint including all other es insurance carriage to work site with loading Unloading etc. Including inspection charges and all complete ( including 1 Nos. rubbergasket along with each pipe)
-
-
-
100 mm
137663
-
-
150 mm
23949
-
-
200 mm
15820
-
-
250 mm
7181
-
-
300 mm
6911
-
-
350 mm
3696
-
-
400 mm
2094
-
-
500 mm
6
-
-
600 mm
8
-
-
Providing and supplying ISI standard D.I. specials & fitting with sealing rubber gasket of S.B.R. complete with cast iron follower gland and M.S. nut & bolts coated or otherwise protected from rusting and suitable for D.I. pipes complete as per I.S.9523 Class-K-12.
214252
-
-
Supplying Labours Tools and Tackles for Testing of Lead CI or UPVC or HDPE or AC or DI pressure Pipe upto 60 m head of water all complete as per specification direction EI.
-
-
-
100 mm
137663
-
-
150 mm
23949
-
-
200 mm
15820
-
-
250 mm
7181
-
-
300 mm
6911
-
-
350 mm
3696
-
-
400 mm
2094
-
-
500 mm
6
-
-
600 mm
8
-
-
Supplying labours , tools tackles ,lubricant etc for laying and jointing DI/C.I.S /S tyton pipes (class LA) trenches supplying rubbber gasket ( Rubber gasket confirming to I.S.S -5382 -1969 ) and making gasket joints including providing night guard , barrier and red light to safe guard against accident all complete ( Pipe to be supplied depatmentally free of cost and laying of pipes is to be done as per ( I.S.S 3114-1985 ) as per design , specification and direction of E /I.(without gasket)
-
-
-
100 mm
137663
-
-
150 mm
23949
-
-
200 mm
15820
-
-
250 mm
7181
-
-
300 mm
6911
-
-
350 mm
3696
-
-
400 mm
2094
-
-
500 mm
6
-
-
600 mm
8
-
-
Labour Charge for one cutting of cast iron/DI pipe & specials including supplying ,necessary tools and plants ,chipping or filling the surface finish as per specification and direction of E/I.
-
-
-
100 mm
551
-
-
150 mm
96
-
-
200 mm
64
-
-
250 mm
29
-
-
300 mm
28
-
-
350 mm
15
-
-
400 mm
9
-
-
500 mm
1
-
-
600 mm
1
-
-
Providing, installing and giving satisfactory field testing of bulk water meter, horizontal inferential multijet type with magnetic drive and dry dial suitable for ambient 50º C Temperature duly sealed against tampering complete with flanges at both ends and conforming to class B as per ISO 4064 along with manufacturer's test certificate and guarantee certificate, including cost of all materials and labour etc with OIML. MID certification for Abroad meter and FCRI for India including 36 months guarantee etc complete.
-
-
-
150 mm dia
4
-
-
200 mm dia
6
-
-
250 mm dia
6
-
-
300 mm dia
9
-
-
Providing Double Flanged Sluice valve confirming for IS 2906/14846 including worm gear arrangements as per test pressure satainless steel , spindle , caps including all transportation etc. complete.(PN-1 without byepass arrangement. with ED)
-
-
-
100 mm
197
-
-
150 mm
34
-
-
200 mm
23
-
-
250 mm
10
-
-
300 mm
10
-
-
350 mm
5
-
-
400 mm
3
-
-
500 mm
1
-
-
600 mm
1
-
-
Supplying Labour and tools for fixing CI sluice valve trenches with a pair of C.I Tail pair including making ) flanged joints as per IS specification confirming to I.S.S 782-1978 confirming to I.S.S 6557-1972 and nuts and bolts confirming to I.S.S 1364 -1983 ) . Including drilling holes in flanged if required as per specification and direction of E/I .
-
-
-
Sluice valve
-
-
-
100 mm
197
-
-
150 mm
34
-
-
200 mm
23
-
-
250 mm
10
-
-
300 mm
10
-
-
350 mm
5
-
-
400 mm
3
-
-
500 mm
1
-
-
600 mm
1
-
-
Scour Valve
-
-
-
100 mm dia
56
-
-
House Connection
-
-
-
Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil Item-A) and disposal of excavated earth as obtained to a distance up to 50 M-Including all lifts,leveling ramming the foundation trenches,removing roots of trees, shards all complete as per approved design,building specification and direction of E/I.
35310.63
-
-
Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150 mm thick with all leads and lifts including cost of all materials ,Labour,royalty and es all complete as per building specification and direction of E/I (mode of measurement competed volume).
1051.81
-
-
Providing P.C.C. M-150 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6mm is graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, string, curing, es and royalty all complete as per building specification and direction of E/I.
1778.05
-
-
Providing 12mm, cement plaster (1:3) with clean coarse sand of F-M 1-5 including screening, curing with all leads and lifts of water, scaffolding and royalty all complete as per building specification and direction E/I-
33808.05
-
-
Earth work in beak filling the trenches fatter laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction E/I.(For classification for Soil item –A & B.)
31178.54
-
-
Providing and Supplying Blue MDPE pipes conforming to ISO 4427:1996 manufactured from virgin resin PE 80 Food grade compounded Raw Material having Blue Colour only assurance certificate from quality agencies like WRC/CIPET (India)/DVGM/KIWA/SPGN etc. for usage in Drinking Water with quality system The cost shall include testing of all materials, all Central,Sate , Municipal, Inspection charges, transportation up to site, transit insurance, loading, as specified and directed.unloading, stacking etc. complete as specified and directed. 20 mm dia
375645
-
-
Providing and supplying G.I. pipes for usage in drinking water with quality system. The cost shall include testing of all materials all ,loading ,unloading ,staking etc. all complete as per specified and directed. 15mm dia
25043
-
-
Lowering ,Laying and jointing HDPE Double Wall Corrugated Pipes for non pressure Underground drainage and Sewerage applications and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour material except O ring coupler giving satisfactory hydraulic testing as per relevant ISO etc complete. 20 mm dia
375645
-
-
Supplying labour and tools for fixing G.I. pipes with red lead and yarn of following nominal bore with screwed and coquetted joints on wall, calling and floor including supplying and fitting of wall hooks or pipe clamps, wo-iDen plugs, cutting pipe to size and threading ends if required etc. all complete as per specification and direction of enG.I.neer in charge (pipe with socket to be supplied departmentally free of cost)- 15 mm dia
25043
-
-
Supplying and fixing of G.M. Ferrule of approved make in existing C.I. Main including drilling and taping C.I. main all complete as per specification and direction E/I. 1.3mm, 6mm and 10mm ferrule weight not less425 Gms.
25043
-
-
Providing and fixing Gun metal full way valve of approved quality all complete, as per specification and direction of E/I. 20mm dia and weight not less than 400 Gms.
25043
-
-
Providing and fixing 15mm dia male ended C.I. b-iDy brass spindle valve and seat bib clock of approved quality (wt- Not less than 400Gms. ) With extra socket all complete as per specification and direction E/I. 15 mm dia
25043
-
-
Supplying and fixing G.I. fittings of approved make all complete as per specification and direction E/I.
-
-
-
20 mm dia Elbow
25043
-
-
15 mm dia Elbow
25043
-
-
20 mm dia Reducing Socket
25043
-
-
20 mm dia Nipple
25043
-
-
15 mm dia Nipple
50086
-
-
20 mm dia Union Socket
25043
-
-
15 mm dia Socket
25043
-
-
20 mm dia Socket
25043
-
-
Providing, installing and giving satisfactory field testing of Domestic water meter,horizontal inferential multijet type with magnetic drive and dry dial suitable for ambient 50º C Temperature duly sealed against tampering complete with couplings at both ends and conforming to class B as per IS 779/1994 (VI Revision) with ISI mark along with manufacturer's test certificate and guarantee certificate, including cost of all materials and labour.
15 mm dia.
25043
-
-
Valve Chamber
-
-
-
R.C.C. Valve Chamber
-
-
-
(1.20mx.90mx1.50m)
347
-
-
Thrust Block
-
-
-
RCC Thrust Block for up to 200 mm dia Pipe
8
-
-
RCC Thrust Block for 250 mm to 350 mm dia Pipe
2
-
-
RCC Thrust Block for 400 mm to 500 mm dia Pipe
23
-
-
RCC Thrust Block for 600 mm to 700 mm dia Pipe
64
-
-
ENVIRONMENTAL MANAGEMENT PLAN (EMP)
-
-
-
Tree plantation at project sites
150
-
-
Air quality monitoring for paramameters; PM 10 ug/m3, so2, NOX,CO
85
-
-
Noise levels monitoring To identify sources of noise, Noise due to traffic/transportation of vehicles, Noise due to heavy equipment operations, Duration and variations in noise over time etc., the equivalent, noise levels should be monitored (Lday and Lnight in LeqdBA) from NABL approved laboratory and submission of report complete in all respect.
85
-
-
Surface water monitoring PH, TDSTaste & Odour, Turbidity, Magnesium, Total hardness, Total alkalinity, chioride, sulphate, nitrate, fluoride, calcium, Iron, pesticide, manganese, Copper, Arsenic,Cadmium, Cyanides, Lead, Selenium,mercury.
45
-
-
Surface water monitoring PH, TDSTaste & Odour, Turbidity, Magnesium, Total hardness, Total alkalinity, chioride, sulphate, nitrate, fluoride, calcium, Iron, pesticide, manganese, Copper, Arsenic, Cadmium, Cyanides, Lead, Selenium, mercury.
45
-
-
Surface water monitoring for total coliform, faecal coliform, IS10500 and as per CPCB criteria
100
-
-
Surface water monitoring PH ,TDS Tasta& Odour, Turbidity Magnesium ,Total hardness, Total alkalinity, chloride ,sulphate , nitrate ,fluoride ,calcium iron postide, manganese,
100
-
-
Raw Sewage Analysis Collecting representative sample and Physical & Chemical testing of Parameter from NABL approved laboratory as per CPHEEO manual: PH, Temprature, TSS, TDS, Inorganic dissolved solids, Alkalinity as CaCO3, tatal hardness as CaCO3, chloride as CI, sulphate as S04, Floride as F, Phosphate as P04, Ammonical Nitrogen as N, Sodium as Na, TKN, BOD at 200 C, COD, Silica as SiO2, oil and grease, sulphide as S, phenolic compound and submission of report complete in all respect.
40
-
-
Capacity BUILDING
-
-
-
Training on EMP implementation (50 person for 1 days )
1
-
-
SCADA System
-
-
-
Integration panel - Wirelesscommunication panel-Scope of work-(SITC of integration panel to communicate with the centralized SCADA centerproposed under ranchi water supply scheme.The integration panel shall consist of redundant RTU ,with redundant power supply modules,redundant GPRS communication modules and 16" panel color HMI.The panel shall be rated to IP-68.The RTU panel shall be enclosed with IP-68 rated enclosure to house the panel and UPS system. The panel design shall consists of the following on a minimum for security of the panel: Door switch: shall initiate a signal to the central SCADA center when the door is opened. Flashing light with siren atop the panel with grill covering: shall flash and siren when the panel is opened on site. This shall indicate unauthorized access to the panel. PLC Panel, PLC based control monitoring and communication software, Surveillance system, Supply, Installation, Commissioning, Testing, Terminating & Interfacing Software Design to PLC and commissioning of SCADA software with required hard tags
1
-
-
Carriage of materials
-
-
-
cement ( lead up to 2 km )
6790.38
-
-
Steel ( lead up to 2 km )
489.96
-
-
Sand ( lead up to 10 km )
12030.09
-
-
Chips ( lead up to 10 km )
14991.03
-
-
Bricks ( lead up to 6 km )
1804.06
-
-
Carrying out opration & maintenance of works for a period of 5 years including cost of all supervisory staff, materials, chemicals, equipments, consumables, including sludge analysis and disposal, establishment, maintenance & repairs, inclusive of comprehensive opration and maintenance of complete instrumentation, control and automation system with manpower to operate the WTP & pumping stations (24 X 7) data transmission cost to centralized SCADA center, Comprehensive maintenance of field instrumentation, control & automation at all location etc complete as per directed by Engineer - in - Charge. (The Bid will be rejected if the bidder has not quoted O&M cost in follwoing rows. Price bid will be evalueated based on methodology given in the clause 1.7of section 3 of bid document )
-
-
-
Operation and Maintenance for 1st Year Exluding annual repair charge
1
-
-
Operation and Maintenance for 2nd Year Including annual repair charge
1
-
-
Operation and Maintenance for 3rd Year Including annual repair charge
1
-
-
Operation and Maintenance for 4th Year Including annual repair charge
1
-
-
Operation and Maintenance for 5th Year Including annual repair charge
1
-
-
Max guaranteed electricity consumption (please quote quantity in KWH/year for the following rows in column "M". This cost will be used for eveluation)
-
-
-
1st Year
5.5
-
-
2nd Year
5.5
-
-
3rd Year
5.5
-
-
4th Year
5.5
-
-
5th Year
5.5
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements