Jharkhand State Sports Promotion Society Tender

Providing and fixing of Tensile both side PVC Coated Fabric over MS Frame of height 9feet including Deco Paint as per details given below. It will be welded to shape and pattern. The joint shall have homogeneous weld width of 40mm. The fabric shall be installed, tensioned using a tensioning device and shall not sag at any point. The fabric will be fixed on the frame with fixing accessories like aluminium flat, MS cut laser plates, fittings. Supply, fabrication and installation of MS frame consisting of MS pipes car parking shed complete with clits, base plates, stiffeners etc. The frame shall be welded and grinded to smooth finish as per design. Painting-The MS Frame shall be cleaned of dirt/grim and oil/grease deposit. The frame shall be sand papered to remove rust. The frame shall be sprayed with de co white paint( ICI) ,red oxide primer to finish and will not have any paint brush streaks. After primer the frame shall be sprayed with NC putty to give it a smooth finish . NC putty shall be manually filled at joints and dents of any. It will be wet sand papered to a smooth glossy finish. The ready surface will be painted with 2 coats of De co spray paint. Cost of foundation to be paid separately. (Tecnhical specifications of fabric and MS frame is :- Yarn- 1100 dtex, weight 700 g/sqm, width 300 cm, Tensile strength 3000/300, N/50 mm, Tear Strength 300/300 N, Adhesion 25 n/cm, Finish pvc, Flam retardancy 100 mm/ min, Handling temperature range minus 30 C to plus 70 C, Light transmission 7 to 8, Tensile fabric Mehlar or equivalent, Type of welding Heat sealing, Plotting type machine plotting, Water proofing yes, wind load carrying capacity should be as per Zone area, Fittings Aluminium and hp, Structure details CHS & RHS MS section, Warranty 10 years, Painting one layer of Red oxide and two layers of Deco Paint, MS column pipe Dia 165 x4 mm thickness (Jindal or equivalent), Arc/Rafter Dia 76*3.5 mm thick (Jindal or equivalent), Purlin/ support pipe Dia 76&60 mm *3&2.6 mm thick (Jindal or equivalent))

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.2.6.1 All kinds of soil

Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming, consolidating and dressing complete.