Jharkhand Industrial Infrastructure Development Corporation Tender
Search from across the categories, cities, and authorities to find the latest Jharkhand tenders. Every Jharkhand tender is curated from credible sources of government websites (eProcurement Jharkhand portal) and newspapers, thus ensuring the credibility of the information presented to you. For more information on Jharkhand tender bidder registration, the login process and more read the FAQs section on this page.
Costs
EMD
₹ 33,79,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_JIIDC_61648_1Bid Award Id
ViewTender No
JIIDCO/07/SBD/2022-2023Tender Authority
Jharkhand Industrial Infrastructure Development Corporation ViewPurchaser Address
-Website
http://jharkhandtenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Providing coarse clean sand in filling in foundation trenches or plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts includng cost of all materials, Labour, rotalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume).
6542.91
-
-
... More
Providing designation 75B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening maerials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.
556.05
-
-
... More
Providing designation 75Bbrick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints costs of screening materials, scaffolding, raking out joints to 15mm depth curing taxes and royalty all complete as per building specification and direction of E/I.
1139.42
-
-
... More
Providing designation 125mm thick reinforced designation 75A brick work in (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening carriage of materials, scaffolding, raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement0 all complete as per building specification and direction of E/I.
9.34
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size)
5.72
-
-
... More
1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)
10.76
-
-
... More
1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size)
243.05
-
-
... More
1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
781.13
-
-
... More
Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete. 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
7.47
-
-
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)
3734.96
-
-
... More
Providing R.C.C. M-200 in band at plinth level with nominal mix of (1:1.5:3)
1149
-
-
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)
641.53
-
-
... More
Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size).
191.22
-
-
... More
Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : 12.15.1 With residual type petroleum bitumen of grade VG -10
1564.64
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for
Foundations, footings, bases of columns, etc. for mass concrete
12267.4
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform
4075.99
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Shelves (Cast in situ)
15.78
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers
4027.79
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts
6375.04
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Stairs, (excluding landings) except spiral-staircases
104.01
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete Weather shade, Chajjas, corbels etc., including edges
120.96
-
-
... More
Supplying, fitting and fixing 35mm thick solid core type decorative single leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resine of standard make with Aluminium fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I.
31.64
-
-
... More
Supplying, fitting and fixing 35mm thick solid core type decorative double leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resine of standard make with Aluminium fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I.
30.24
-
-
... More
S/F 35mm thick solid core type decorative single leaf flush door and windows with black board core banded with high quality phenol formaldehydes synthetic resin both side commercial veneered of standard make with oxidized iron fittings such as hinges, sliding door bolts tower bolts, handles or rings hooks and eyes, cleats sand block as per schedule taxes and royalty all complete as per building and direction of E/I.(one side teak)
4.13
-
-
... More
Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1mm) wall thickness and 3 nos. stainless steel hinges fixed to the framecomplete as per manufacturer’s specification and direction of Engineer in-charge
Extruded section profile size 48x40 mm
145.05
-
-
... More
Providing and fixing to existing door frames.
25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm X 25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm). PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mm X 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer’s specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places
58.28
-
-
... More
Providing Toe steel reinforcement of 8mm dia to 32mm dia rods as approved design and drawing excluding carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (Only Valid for SAIL & TATA STeel)
763.28
-
-
... More
S/F M.S. grill made of 20 x 6mm M.S. flat as per approved design and drawing, properly fabricated with joints continous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction ofE/I. (Where materials is not supplied by the deptt.)
38226.93
-
-
... More
Providing and fixing fan hooks of 16mm dia M.S. bar & 1 meter long, bent torequired size and shape, placed in position and fixed in the R.C.C.slab/beam at the time ofcasting all complete as per building specification and direction of E/I.
102
-
-
... More
S/F local make fully glazed steel door, windows or ventilation of standard rolled 'Z' and mullion steel section and size as per IS - 38 joints met welded with 100 x 16 x 3mm M.S. lug fixed in cement concrete (1:2:4) blocks, 15 x 10 x 10cm size including cost of oxidized iron fitting with hinges, handle per step catch springs, 3mm thick plain glass panes with aluminum beads and inner frame fixed with lugs with 20mm long 6.3mm GI. counter sunk machine screw and nuts and applying a coat red lead paint carriage to work site hoisting and plcing in all position in all storys and taxes all complete as per building specification and direction of E/I.
5.58
-
-
... More
Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering texes royalty all complete as per building specification and direction of E/I.
342.74
-
-
... More
Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
301.04
-
-
... More
15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement:6 fine sand)
2844.58
-
-
... More
Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I.
13993.17
-
-
... More
Providing 6mm thick cement plaster (1:4) in ceiling with clean of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
3261.34
-
-
... More
Providing 1.5mm cement punning including curing, carraige of water with all leads and lifts as per building specification and direction of E/I.
301.04
-
-
... More
Providing two coat of oil bound distemper of approved shade and make over a primer coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding, washing floors and taxes all complete as per building specification and direction of E/I.
6827.01
-
-
... More
Providing two coat of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding curing and taxes all complete as per building specification and direction of E/I.
10427.5
-
-
... More
Providing two coats of synthetic enamel paint of approved shade and make over new wooden surface including cleaning the surface after removing dirt including scales, smokes, grease and sand preparing, including cost of scaffolding and taxes all complete as per building specification and direction of E/I.
10.93
-
-
... More
Providing one coat of vernishing over new wooden surface to give desired texture and gloss with shalimar, gopal or euivalent approved quality of varnish with sizing including cleaning the surface cleaning removing dirt,scales grease including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.
267.62
-
-
... More
Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement Area shall be multiplied by the co-efficient as indicated in building specificatio).
1837.24
-
-
... More
Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly cost of scaffolding and taxes all complete as per building specification and direction of E/I.
1842.81
-
-
... More
Providing 250mm wide brick drain in cement mortar (1:6) with as. 150mm clear depth and 250mm apron including cost of earthwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.
243.5
-
-
... More
Providing 150mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 125mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.
99
-
-
... More
Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete.
Granite of any colour and shade
132.25
-
-
... More
Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar
1:4 (1 cement : 4 coarse sand) and finished neat complete.
343.12
-
-
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per
standard design : In 75x75 mm deep chase
237
-
-
... More
Water proofing for old and New Roof slab:- Providing and laying water proofing treatment on roof slab by applying two Component, factory………………E/I.
1240.14
-
-
... More
Covering of treated surface with PCC:- Providing 25mm thick Cement concrete M-20 (1:1.5:3) maintaing slope in alternate 2 Mtr. X 2Mtr. Panels with approved quality of stone chips of 20mm to 6mm Size graded and cleaned sand of F.M. 2.5 to 3 including screening................E/I.
1240.14
-
-
... More
Providing and filling of 6mm thick Groove between 25mm PCC panels with Polysuplhide sealant (Poring Grade) as per drawing and techinical speicifcation and direction of E/I.
1240.14
-
-
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
168.7
-
-
... More
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including:
a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.
b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.
c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot DipGalvanised with serrations and serrated washers to arrest the wind loadmovement, fasteners, SS 316 Pins and anchor bolts of approved make inSS 316, Nylon separators to prevent bi-metallic contacts all completerequired to perform as per specification and drawing The item includescost of all material & labour component, the cost of all mock ups at site,cost of all samples of the individual components for testing in an approvedlaboratory, field tests on the assembled working curtain wall with aluminiumcomposite panel cladding, cleaning and protection of the curtain wall withaluminium composite panel cladding till the handing over of the building foroccupation. Base frame work for ACP cladding is payable under the relevantaluminium item.s The Contractor shall provide curtain wall with aluminiumcomposite panel cladding, having all the performance characteristics allcomplete , as per the Architectural drawings, as per item description, asspecified, as per the approved shop drawings and as directed by theEngineer-in-Charge. However, for the purpose of payment, only the actualarea on the external face of the curtain wall with Aluminum CompositePanel Cladding (including width of groove) shall be measuredin sqm. up to two decimal places.
142.04
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble
Area of slab over 0.50 sqm
18.51
-
-
... More
Providing and fixing pressed steel door frames conforming to IS: 4351,manufactured from commercial mild steel sheet of 1.60 mm thickness,including hinges, jamb, lock jamb, bead and if required angle threshold ofmild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressedmild steel welded or rigidly fixed together by mechanical means, includingM.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strikeplateand shock absorbers as specified and applying a coat of approved steelprimer after pre-treatment of the surface as directed by Engineerin-charge:
Profile B- Fixing with adjustable lugs with split end tail to each jamb
272.12
-
-
... More
Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
5971.48
-
-
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use ofchequered plate wherever required, all completeIn gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
3293.8
-
-
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.).
166.32
-
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
519.08
-
-
... More
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily
Glazed Vitrified tiles Matt/Antiskid finish of size-Size of Tile 600 x 600 mm
144.24
-
-
... More
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and asdirected by the Engineer-in-Charge :
Flamed finish granite stone slab Jet Black, Cherry Red, Elite
Brown, Cat Eye or equivalent.
225.5
-
-
... More
Providing and laying Double Charge vitrified floor tiles in Different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and confirming to IS 15622/ISO 13006, of approved make , in all colour and shades laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointed with grey cement slurry@3.3 kg /sqm including grouting the joints with white cement and matching pigment etc.Size of tiles 600x600mm
2860.34
-
-
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making
and finishing the outlet complete.
38
-
-
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with sea; ring conforming to IS:5382, leaving 10mm gap for thermal expansion, Single socketed pipes
110 mm Rain water pipe
353.4
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
Coupler - 110mm
44
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
Bend - 110mm
44
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
Shoe - 110
44
-
-
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete
110 mm
246
-
-
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
2802.48
-
-
... More
Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete.
9671.58
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion - Powder coated aluminium (minimum thickness of powdercoating 50 micron)
602.06
-
-
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) - Powder coated aluminium (minimum thickness of powdercoating 50 micron)
718.41
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
With float glass panes of 4.0 mm thickness
292.9
-
-
... More
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width
708.3
-
-
... More
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @120 grams/ sqm, both side inclusive) consisting of main "T" runnerwith suitably spaced joints to get required length and of size 24x38mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main"T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mmcenter to center along main T, bottom exposed width of 24 mm of all
T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing.
1837.34
-
-
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
133.28
-
-
... More
Carriage of Materials
Bricks Lead = 1 k+7 P(8km)
553.97
-
-
... More
Sand lead = 8 km
5177.21
-
-
... More
Stone chips lead = 22 km
8469.16
-
-
... More
Stone metal lead = 22 km
5019.59
-
-
... More
Local Sand lead = 3km
5993.11
-
-
... More
Sanitary & Plumbing Work
Providing and fixing male ended 15mm dia brass bib cock of approved quality (Wt. not less than 350 gms.) with extra socket all compere as per specification and direction of E/I.
25
-
-
... More
Providing & fixing 15mm size C.P. brass pillar cock(Weight not less than 350 gms) C.I. body brass spindle pillar cock of approved quality as per specification & direction of E/I.
C.I. body brass spindle
26
-
-
... More
Providing and fixing brass/C.I. stop cock of approved quality all complete as per specification and direction of E/I.
15 mm dia
73
-
-
... More
Providing and fixing G.M. non return valve Horizontal/Vertical type of approved quality as per specification and direction of E/I.
Horizontal - 25 mm dia
6
-
-
... More
Providing and fixing G.M. non return valve Horizontal/Vertical type of approved quality as per specification and direction of E/I.
Horizontal - 32 mm dia
3
-
-
... More
Making holes in walls for laying G.I. pipe and restoring the same after pipe laying as per specification and direction of E/I.
125 mm thick wall
24
-
-
... More
Making holes in walls for laying G.I. pipe and restoring the same after pipe laying as per specification and direction of E/I.
250 mm thick wall
28
-
-
... More
Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I.
Mirror of 6 mm thick plate glass bevelled edge mirror including C.P. brass remolving fitting 3 mm ply wood board and C.P hinges to fix with mirror
Mirror (600 x 450mm)
28
-
-
... More
C.P. brass tower rail20 mm x600 mm with braket container
8
-
-
... More
C.P. brass soap container medium quality with screw and hinges etc.
28
-
-
... More
Supplying, fitting and fixing viterious white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I. 'p' trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings C.I. or C.C. brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair or viterous white glazed earthenware footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less than exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I.
580mm long - With 12.5 lit. low level PVC cistern
14
-
-
... More
Supplying, fitting and fixing 40mm highb viterous white glazed earthen E.W.C. with 'P' trap of parry hindustan or any other approved I.S.S. make including supplying and fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fitting with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stope cock of approved quality weight not less than 450 grams 15mm PVC alkathene pipe 45cm. long with brass coupling at both ends and white/black plastic soild state seal and lead of commander/cuckoo or other I.S.S. make with hinges or screws etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide priming all complete as per specification and direction of E/I.
With 'P' trap - 12.5 lit low level PVC Cistern
11
-
-
... More
Supplying, fitting and fixing flat back or angular, lipped front viterous white glazed earthen ware urinal of 'Hindustan "Parry" or any other approved I.S.S. make with 5 liters capacity C.I. automatic flushing cistern of reliance for any other I.S.S. approved make with all fittings with C.I. or R.S., brackets, standard size G.I. flush pipe with fitting clamps, 15mm, C.I. body brass spindle stop cock of approved quality weight not less than 400 grams, 15mm P.V.C./Alkthene pipe 450mm long with brass coupling at both ends and doing plumber joints including painting coat of red oxide cutting wall and floor making good the same etc. all complete as per specification and direction of E/I.
(a)Flat back or Standing Cornar (600 mm x350 mm)
28
-
-
... More
Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S. approved make supported on pointed C.I. or R.S. brackets 32m C.I. brass waste 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grms. 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I.
28
-
-
... More
Supplying NP2 R.C.C. hume pipe with colour as work site as per direction of E/I.
150mm dia
320
-
-
... More
Approved basic rates construction materials for preparation of schedule of rates only, (Material should conform to relevent B.I.S. specification). The rates are inclusive of all taxes, royalty, cess and carraige but exclusive of contractor's profit and overhead charges -
Special type of C.P. Bath room fitting for V.I.P. buildings (JAL, Jaguar, Marc or equivalent mark)
Angular Stopcock /2 way bib cock
11
-
-
... More
Approved basic rates construction materials for preparation of schedule of rates only, (Material should conform to relevent B.I.S. specification). The rates are inclusive of all taxes, royalty, cess and carraige but exclusive of contractor's profit and overhead charges -
Special type of C.P. Bath room fitting for V.I.P. buildings (JAL, Jaguar, Marc or equivalent mark)
Telephonic shower flexible pipe
11
-
-
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
75 mm diameter
165
-
-
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
110 mm diameter
200
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
Single tee without door - 75x75x75 mm
22
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
Single tee without door - 110x110x110 mm
18
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
75 mm bend
16
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
110 mm bend
24
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall
25 mm nominal outer dia Pipes
140
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall
32 mm nominal outer dia Pipes
130
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
15 mm nominal outer dia Pipes
145
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
20 mm nominal outer dia Pipes
180
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank, ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank.
7000
-
-
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
3
-
-
... More
ELECTRICAL
Point wiring in PVC conduit, with modular type switch - Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm. FR PVC insulated copper conductor single cable in surface/recessed PVC conduit, with modular type switch, modular plate, suitable size G.I. box etc. as required.
Group A
67
-
-
... More
Point wiring in PVC conduit, with modular type switch - Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm. FR PVC insulated copper conductor single cable in surface/recessed PVC conduit, with modular type switch, modular plate, suitable size G.I. box etc. as required.
GroupC
660
-
-
... More
Twin Control Point Wiring in PVC Conduit, with Modular type Switch: Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, 2 way modular type switch, modular plate, suitable size of GI box etc as required.
2
-
-
... More
Power Plug wiring in PVC Conduit (2X4 Sq.mm) :- Wiring for light/power plug with 2x4 Sq.mm FR PVC insulated copper conductor songle core cable in surface/recessed PVC conduit along with 1 No. 4 Sq.mm FR PVC insulated copper conductor single core cable for loop earthing etc. as required.
210
-
-
... More
Circuit/Sub-main wiring in PVC Conduit:- Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required.
2x1.5 Sqmm + 1x1.5 sqmm earth wire
225
-
-
... More
Circuit/Sub-main wiring in PVC Conduit:- Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required.
2x2.5 Sqmm + 1x2.5 sqmm earth wire
971
-
-
... More
Circuit/Sub-main wiring in PVC Conduit:- Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required.
2x4.0 Sqmm + 1x2.5 sq mm earth wire
2322
-
-
... More
Circuit/Sub-main wiring in PVC Conduit:- Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required.
4x6 Sqmm + 2x6 sqmm earth wire (For 32 A IT Socket )
50
-
-
... More
Circuit/Sub-main wiring in PVC Conduit:- Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required.
4 X 16 sq. mm + 2 x 6 sq.mm Earth Wire
250
-
-
... More
Circuit/Sub-main wiring in PVC Conduit:- Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required.
4 X 10 sq. mm + 2 x 6 sq.mm Earth Wire
175
-
-
... More
Circuit/Sub-main wiring in PVC Conduit:- Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required.
Telephone Wiring in Existing Conduit:-
Supplying and drawing following pair,0.5 sq. mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface/recessed PVC conduit as required.(2 pair)
50
-
-
... More
Supplying and fixing of following sizes of PVC conduit alongwith the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required for Tele, RJ45 Cat 6 data outlet for computer network.
25 mm
44
-
-
... More
S/F Modular type switch socket - Supplying and fixing following modular switch/socket on the existing modular plate and switch box including connection but excluding modular plate etc. as required
5/6 amps, one way switch
12
-
-
... More
S/F Modular type switch socket - Supplying and fixing following modular switch/socket on the existing modular plate and switch box including connection but excluding modular plate etc. as required
3 pin 5/6 amps, socket outlet
12
-
-
... More
S/F Modular type switch socket - Supplying and fixing following modular switch/socket on the existing modular plate and switch box including connection but excluding modular plate etc. as required
Telephone socket outlet
2
-
-
... More
S/F Modular type electronic fan regulator:- Supplying and fixing stepped (two module) type fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required.
124
-
-
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box but excluding modular plate as required.
40
-
-
... More
Supplying and fixing following size / modules GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 module (78 mm x 78 mm x 45 mm)
2
-
-
... More
Supplying and fixing following size / modules GI box along with modular base & cover plate for modular switches in recess etc as required. 6 module (78mm x 205mm x 50mm)
22
-
-
... More
Supplying and fixing following size / modules GI box along with modular base & cover plate for modular switches in recess etc as required. 12 module (135mm x 205mm x 60mm)
72
-
-
... More
S/F light plug point with modular type accessories - Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch connection, painting etc. as required . (For light plugs to be used in non residential buildings)
184
-
-
... More
S/F power plug point with modular type accessories:- Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular type switch, connection, painting etc as required.
140
-
-
... More
S/F Ceiling Rose:- Supplying and fixing 2 pin ceiling rose on the existing junction box/ wooden block including connection etc as required.
31
-
-
... More
S/F Batten / Angle Holder:- Supplying and fixing batten / angle holder including connection etc as required.
42
-
-
... More
Installation of exhaust fan upto 450mm sweep in the existing opening, including making the hole to suit the size of he above fan making good the damage, connection, testing, commisionig etc as required.
11
-
-
... More
Supplying and fixing following way single pole neutral, sheet, MCB disrtibution board, 240 volts, on surface/recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (But without MCB/RCCB/Isolator)
8 way, single door
4
-
-
... More
Supplying and fixing following way three pole & neutral ,sheet steel, MCB distribution board, 415 volts, onsurface /recess, complete with tinned copper bus bar, neutral bus-bar, earthbar ,dinbar, interconnections, powder painted including earthing etc. as required.
4 Way (4+12) Double Door, Horizontal type
8
-
-
... More
Supplying and fixing following way three pole & neutral ,sheet steel, MCB distribution board, 415 volts, onsurface /recess, complete with tinned copper bus bar, neutral bus-bar, earthbar ,dinbar, interconnections, powder painted including earthing etc. as required.
6 Way (4+18) Double Door, Horizontal type
15
-
-
... More
Supplying and fixing 6 amps to 32 amps rating, 240 volts, "B" series, miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commossioning etc. as required.
6/32, single pole, "B" series
14
-
-
... More
S/F 'C' series SP MCB:- Supplying and fixing 240 volts, 'C' series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc, as required. Make- Legrand/Schneider/ Siemens.
6/32A Single Pole
10
-
-
... More
S/F 'C' series SP MCB:- Supplying and fixing 240 volts, 'C' series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc, as required. Make- Legrand/Schneider/ Siemens.
16A rating, SPN MCB, "C" curve 10 KA breaking capacity.
321
-
-
... More
S/F 'C' series SP MCB:- Supplying and fixing 240 volts, 'C' series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc, as required. Make- Legrand/Schneider/ Siemens.
63A rating, TPN MCB, "C" curve 10 KA breaking capacity.
17
-
-
... More
S/F 'C' series SP MCB:- Supplying and fixing 240 volts, 'C' series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc, as required. Make- Legrand/Schneider/ Siemens.
40A rating, TPN MCB, "C" curve 10 KA breaking capacity.
8
-
-
... More
S/F 'C' series SP MCB:- Supplying and fixing 240 volts, 'C' series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc, as required. Make- Legrand/Schneider/ Siemens.
6/32A ,DP
2
-
-
... More
S/F DP MCB Isolator - Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required
40 amp
2
-
-
... More
S/F DP MCB Isolator - Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required
63 amp
1
-
-
... More
Supplying and fixing following rating four pole, (three phase and neutral) 415 volts, residual circuit breaker (RCCB) having a sensitivity current 30 milli amperes in the existing MCB DB complete with connection, testing & commissioning etc. as required.
40 amps
17
-
-
... More
Supplying and fixing following rating four pole, (three phase and neutral) 415 volts, residual circuit breaker (RCCB) having a sensitivity current 30 milli amperes in the existing MCB DB complete with connection, testing & commissioning etc. as required.
25 amps
8
-
-
... More
Supplying and fixing 20 amps 240V, SPN industrial socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP MCB insheet steel enclosure on surace or in recess with chained metal cover for the socket outlet and complete with connections, testing & commissioning etc.
44
-
-
... More
G.I. Earth electrode with salt/charcoal - Earthing with G.I. earth pipe 4.5 mtr. Long, 40mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required
9
-
-
... More
Copper earth plate elecrtode - Earthing with copper earth plate 600mmx 600mm x 3mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. as required (with charcoal or coke and salt)
2
-
-
... More
S/L 8 SWG G.I. wire in ground :- Supplying and laying 8 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc. as required.
30
-
-
... More
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including soldering etc.
30
-
-
... More
Supplying and laying 25 mm X 6 mm G.I strip at 0.50 metre below ground as strip earth electrode, including soldering etc.
45
-
-
... More
P/F 25mm x 5mm copper earth strip in surface/recess - Providing and fixing 25mm x 5mm copper strip on surface or in recess for connections etc. as required.
98
-
-
... More
P/F G.I. lightning conductor finial - Providing and fixing of lightning conductor finial, made of 25mm dia 300mm long, G.I. tube, having single prong at top, with 85mm dia 3mm thick G.I. base plate including holes etc. complete as required.
1
-
-
... More
S/L 8 SWG copper wire in ground - Supplying and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth, including soldering etc. as required
40
-
-
... More
MV Cable Laying upto 25 Sq mm in ground:- Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc, as required.
160
-
-
... More
MV cable laying upto 95 sq.mm. in ground - Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 35 sq.mm. but not exceeding 95 sq.mm. direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.
115
-
-
... More
Laying of one nùmber PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size exceeding exceeding 185 sqmm but not exceeding 400 sqmm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
35
-
-
... More
Providing and fixing of XLPE, Aluminium Armoured PVC Cable confirming to IS IS7908 (Part-1) 1988 0f grade 1.1KV. Make:- Havells / Finolex / Polycab Supplying PVC/XLPE insulated PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor- 3.5 core, 50 sq.mm
230
-
-
... More
Supplying and fixing of 9/10 Watt LED Bulb
56
-
-
... More
Supplying and fixing of 15 Watt LED Bulb
21
-
-
... More
Supplying and fixing LED Batten (20/22W)
31
-
-
... More
Supply fitting fixing of Bulk head fitting with 9/10 watt CFL/LED
2
-
-
... More
Supply of LED Street light (45/48W)
5
-
-
... More
Supply and installation of Ceiling fan 48" (1200mm)
20
-
-
... More
Supply, fitting, fixing and testing of 1400mm Sweep, double ball-bearing, 2 canopy ceiling fan including connection with 1.5 sq mm copper wire, down rod all accessories as required.
104
-
-
... More
Supply and installation of 16" (400mm) wall mounted fan
19
-
-
... More
Supply of 12" (300mm) metal exhaust fan
15
-
-
... More
Supply fitting fixing of Recess Mounting LED Round Down light (12W)
12
-
-
... More
2X20W LED Tube light
23
-
-
... More
Supply of following sizes and core PVC/XLPE insulated, PVC sheathed armoured electrical cable with aluminium conductor for working voltage upto 1.1 KV etc as required. 3.5c x 240 sq.mm
50
-
-
... More
Supply of following sizes and core PVC/XLPE insulated, PVC sheathed armoured electrical cable with aluminium conductor for working voltage upto 1.1 KV etc as required. 3.5c x 300 sq.mm (From Trafo-1 to MDB-1)
50
-
-
... More
Supply of following sizes and core PVC/XLPE insulated, PVC sheathed armoured electrical cable with aluminium conductor for working voltage upto 1.1 KV etc as required. 3.5c x 300 sq.mm (From Trafo-2 to MDB-2)
100
-
-
... More
Supply of following sizes and core PVC/XLPE insulated, PVC sheathed armoured electrical cable with aluminium conductor for working voltage upto 1.1 KV etc as required. 3.5c x 300 sq.mm (From Trafo-3 to MDB-3)
200
-
-
... More
Supply of following sizes and core PVC/XLPE insulated, PVC sheathed armoured electrical cable with aluminium conductor for working voltage upto 1.1 KV etc as required. 3.5c x 300 sq.mm (From Trafo-4 to MDB-4)
50
-
-
... More
Supply of following sizes and core PVC/XLPE insulated, PVC sheathed armoured electrical cable with aluminium conductor for working voltage upto 1.1 KV etc as required. 3.5c x 185 sq.mm (From MDB-2 to STP)
50
-
-
... More
Supply of following sizes and core PVC/XLPE insulated, PVC sheathed armoured electrical cable with aluminium conductor for working voltage upto 1.1 KV etc as required. 3.5c x 185 sq.mm (From MDB-2 to ETP)
50
-
-
... More
Supply of following sizes and core PVC/XLPE insulated, PVC sheathed armoured electrical cable with aluminium conductor for working voltage upto 1.1 KV etc as required. 4c x 16 sq.mm (From MDB-1 to Feeder Pillars)
550
-
-
... More
Supply of following sizes and core PVC/XLPE insulated, PVC sheathed armoured electrical cable with aluminium conductor for working voltage upto 1.1 KV etc as required. 2c X 6 sq. mm (For Street lights)
3500
-
-
... More
Supply of following sizes and core PVC/XLPE insulated, PVC sheathed armoured electrical cable with aluminium conductor for working voltage upto 1.1 KV etc as required. 3.5c x 95 sq.mm (From MDB-3 to Large Plots)
275
-
-
... More
Supply of following sizes and core PVC/XLPE insulated, PVC sheathed armoured electrical cable with aluminium conductor for working voltage upto 1.1 KV etc as required. 3.5c x 70 sq.mm (From MDB-3 to Medium Plots)
1400
-
-
... More
Supply of following sizes and core PVC/XLPE insulated, PVC sheathed armoured electrical cable with aluminium conductor for working voltage upto 1.1 KV etc as required. 3.5c x 25 sq.mm (From MDB-3 to Small Plots)
2000
-
-
... More
Supply of following sizes and core PVC/XLPE insulated, PVC sheathed armoured electrical cable with aluminium conductor for working voltage upto 1.1 KV etc as required. 3.5c x 25 sq.mm (From MDB-3 to Micro Plots)
540
-
-
... More
Supply of following sizes and core PVC/XLPE insulated, PVC sheathed armoured electrical cable with aluminium conductor for working voltage upto 1.1 KV etc as required. 3.5c x 95 sq.mm (From MDB-4 to Large Plot)
660
-
-
... More
Supply of following sizes and core PVC/XLPE insulated, PVC sheathed armoured electrical cable with aluminium conductor for working voltage upto 1.1 KV etc as required. 3.5c x 25 sq.mm (From MDB-4 to Micro Plots)
2070
-
-
... More
Laying of one nùmber PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size exceeding 185 sqmm but not exceeding 400 sqmm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
350
-
-
... More
Laying of one nùmber PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size exceeding 95 sq mm but not exceeding 185 sq mm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
75
-
-
... More
Laying of one nùmber PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size exceeding 35 sq mm but not exceeding 95 sqmm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
1450
-
-
... More
Laying of one nùmber PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size not exceeding 35 sq mm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
7500
-
-
... More
1.1 KV Cable End Termination:- Supplying and making indoor cable end termination with brass double compression gland and aluminium lugs for following size of PVC insulated XLPE Al. Ar. Cable of 1.1 KV grade as required.
3.5c x 240 sq.mm (62mm)
2
-
-
... More
1.1 KV Cable End Termination:- Supplying and making indoor cable end termination with brass double compression gland and aluminium lugs for following size of PVC insulated XLPE Al. Ar. Cable of 1.1 KV grade as required.
3.5c x 300 sq.mm (70mm)
8
-
-
... More
1.1 KV Cable End Termination:- Supplying and making indoor cable end termination with brass double compression gland and aluminium lugs for following size of PVC insulated XLPE Al. Ar. Cable of 1.1 KV grade as required.
3.5c x 185 sq.mm (57mm)
4
-
-
... More
1.1 KV Cable End Termination:- Supplying and making indoor cable end termination with brass double compression gland and aluminium lugs for following size of PVC insulated XLPE Al. Ar. Cable of 1.1 KV grade as required.
3.5c x 95 sq.mm (45mm)
6
-
-
... More
1.1 KV Cable End Termination:- Supplying and making indoor cable end termination with brass double compression gland and aluminium lugs for following size of PVC insulated XLPE Al. Ar. Cable of 1.1 KV grade as required.
3.5c x 70 sq.mm (38mm)
4
-
-
... More
1.1 KV Cable End Termination:- Supplying and making indoor cable end termination with brass double compression gland and aluminium lugs for following size of PVC insulated XLPE Al. Ar. Cable of 1.1 KV grade as required.
3.5c x 25 sq.mm (28mm)
42
-
-
... More
1.1 KV Cable End Termination:- Supplying and making indoor cable end termination with brass double compression gland and aluminium lugs for following size of PVC insulated XLPE Al. Ar. Cable of 1.1 KV grade as required.
4c x 16 sq.mm (28mm)
6
-
-
... More
S.I.T.C of following rating recess/surface mounting round/square shape downlight with pressure die cast housing for single phase supply voltage. Luminaire shall conform to IS:3022 part-5/ section-2 or IEC:62722 with all necessary accesories as required.
15W LED Round Down light
109
-
-
... More
S.I.T.C of following rating recess/surface mounting round/square shape downlight with pressure die cast housing for single phase supply voltage. Luminaire shall conform to IS:3022 part-5/ section-2 or IEC:62722 with all necessary accesories as required.
20W LED Round Down light
4
-
-
... More
S.I.T.C of following rating recess/surface mounting round/square shape downlight with pressure die cast housing for single phase supply voltage. Luminaire shall conform to IS:3022 part-5/ section-2 or IEC:62722 with all necessary accesories as required.
2' X 2' LED Panel Light (34W)
31
-
-
... More
S.I.T.C of following rating recess/surface mounting round/square shape downlight with pressure die cast housing for single phase supply voltage. Luminaire shall conform to IS:3022 part-5/ section-2 or IEC:62722 with all necessary accesories as required.
2' X 2' LED Panel Light (24W)
215
-
-
... More
S.I.T.C of following rating recess/surface mounting round/square shape downlight with pressure die cast housing for single phase supply voltage. Luminaire shall conform to IS:3022 part-5/ section-2 or IEC:62722 with all necessary accesories as required.
1' X 2' LED Panel Light (24W)
17
-
-
... More
Supplying and fixing batten/ angle holder including connection etc. as required.
42
-
-
... More
S.I.T.C of following rating LED Street lighting luminaire with pressure die cast housing and toughened glass cover, IP66 protection, luminous efficacy 10LM/W with lens in existing pipe/pole for supply voltage 100-270V AC, 50Hz.Luminaire shall conform to IS:3022 part-5/ section-3 and shall be complete with all necessary accesories as required.
70/72W LED street light
77
-
-
... More
Supply of 7 metre hot dip galvanised Octagonal pole(BOP-7030) with top dia 70mm, bottom dia 130mm & made of 3 mm thick sheet, base plate dimensions 200 x 200 x 12 mm(LXBXT) including suitable sizes of foundation bolt all complete as reqd. (without arm)
77
-
-
... More
Supply of 0.5m single arm suitable for 70mm top
77
-
-
... More
Installation, testing & ommisiioning of 7 mtr high octagonal pole & light fitting with the help of suitable tools and plants, wiring of luminaires with all materials and construction of shallow foundation with M25 grade concrete considering safe soil bearing capacity of 10T/sq.mtrs.
77
-
-
... More
Supplying outdoor type copper wound transformer continuously rated for 3Ph 50Hz at full load and temp rise not exceeding 45C by thermometer in oil and 50C by the resistance in winding after continuous run at full load rating, the transformer should have oil imnersed winding having vector group DY11, HT Side connected in delta and LT side connected in star with neutral brought out comected to provide separate earthing. The Transformer shall have power terminal arrangement, bushing/ cable end box on HT side end cable end box on LT side 2 nos. channels with stoppers shall be provided and fixed on the provided plinth for mounting the transformer. The transformer should have following standard fittings. Transformer shall be of latest manufactaring standards as per amended IS specifications and the load & No load losses shall be imited to the values given below or as per (IS 2026 or Norms issued by SEB wIch ever are lower
Oil consevator with filling hole with cap and plain oil level gauge
Silica gel dehydrating breather charged with silica gel
Oil drain valve Oil filter valve Lifting eyes/hooks
Two earthing terminals
Diagram and rating Plate
Air vent
Explosion vent
100 mm dia thermo meter with thermometer pocket
Four bi directional plain roller
200 KVA
2
-
-
... More
Supplying outdoor type copper wound transformer continuously rated for 3Ph 50Hz at full load and temp rise not exceeding 45C by thermometer in oil and 50C by the resistance in winding after continuous run at full load rating, the transformer should have oil imnersed winding having vector group DY11, HT Side connected in delta and LT side connected in star with neutral brought out comected to provide separate earthing. The Transformer shall have power terminal arrangement, bushing/ cable end box on HT side end cable end box on LT side 2 nos. channels with stoppers shall be provided and fixed on the provided plinth for mounting the transformer. The transformer should have following standard fittings. Transformer shall be of latest manufactaring standards as per amended IS specifications and the load & No load losses shall be imited to the values given below or as per (IS 2026 or Norms issued by SEB wIch ever are lower
Oil consevator with filling hole with cap and plain oil level gauge
Silica gel dehydrating breather charged with silica gel
Oil drain valve Oil filter valve Lifting eyes/hooks
Two earthing terminals
Diagram and rating Plate
Air vent
Explosion vent
100 mm dia thermo meter with thermometer pocket
Four bi directional plain roller400 KVA
1
-
-
... More
Supplying outdoor type copper wound transformer continuously rated for 3Ph 50Hz at full load and temp rise not exceeding 45C by thermometer in oil and 50C by the resistance in winding after continuous run at full load rating, the transformer should have oil imnersed winding having vector group DY11, HT Side connected in delta and LT side connected in star with neutral brought out comected to provide separate earthing. The Transformer shall have power terminal arrangement, bushing/ cable end box on HT side end cable end box on LT side 2 nos. channels with stoppers shall be provided and fixed on the provided plinth for mounting the transformer. The transformer should have following standard fittings. Transformer shall be of latest manufactaring standards as per amended IS specifications and the load & No load losses shall be imited to the values given below or as per (IS 2026 or Norms issued by SEB wIch ever are lower
Oil consevator with filling hole with cap and plain oil level gauge
Silica gel dehydrating breather charged with silica gel
Oil drain valve Oil filter valve Lifting eyes/hooks
Two earthing terminals
Diagram and rating Plate
Air vent
Explosion vent
100 mm dia thermo meter with thermometer pocket
Four bi directional plain roller
500 KVA
1
-
-
... More
Granular sub-base with close graded material (Table - 400 - 1)-
By mix in place method (construction of granular sub0base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401)
for grading - I Material
3500
-
-
... More
Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.)
With Vibratory Roller
4500
-
-
... More
Cement concrete pavement (Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement @ 400kg per cum, coarse and fine aggregate conforming to IS: 383, maximum size of coarse aggregate not exceeding 2mm, mixed in a batching and mixing plant as per approved mix design, transported to site laid with a fixed form or slip form paver, spread, compacted and finished in a continous operation including provision of contraction, expansion, construction and debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finished to lines and grades as per drawing)
4200
-
-
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including
making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
780
-
-
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.
80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.
9375
-
-
... More
PLANTATION
a) Planting Permanent Hedges including Digging of Trenches (Planting permanent hedges including digging of trenches, 60 cm wide and 45 cm deep, refilling the excavated earth mixed with farmyard manure, supplied at the rate of 4.65 cum per 100 metres and supplying and planting hedge plants at 30 cm apart)
4000
-
-
... More
Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).
291.6
-
-
... More
Supplying and spreading of sand in lawn area, including watering, and dressing complete.
450
-
-
... More
Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment).
500
-
-
... More
Supplying and stacking at site dump manure from approved source, including carriage up to 1km (manure measured in stacks will be reduced by 8% for payment)
50
-
-
... More
Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same maintenance for 30 days or more till the grass establish properly,as per direction of officer in charge
3000
-
-
... More
Fine dressing of the ground
5000
-
-
... More
Spreading of sludge, dump manure and/or good earth in required thickness as per direction of Officer-in-charge (Cost of sludge, dump manure and/or good earth to be paid seprately
50
-
-
... More
Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge
50
-
-
... More
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to150 mm measured
20000
-
-
... More
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water)
TREE Plants
1800
-
-
... More
Providing and displaying of Areca Palm plant, having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 20 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge.
500
-
-
... More
Providing and stacking of Polyalthia longifolia (Ashok) of height 150-165 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge.
100
-
-
... More
Providing and stacking of Ficus benjamina (green) of height 150-165 cm., bushy with healthy branches and lush green foliage in big size HDPE bags as per direction of the officer-in-charge.
50
-
-
... More
Providing and stacking of Ficus bengalensis krishna of height 75-90 cm., multibranched in earthen pots of size 30 cm as per direction of the officer-in-charge
50
-
-
... More
Providing and Displaying plants Missbranthemum in different colour well developed with fresh & healthy foliage in full bloom in 20 cm Earthen Pot/ Plastic Pot and as per direction of the officer-in-charge.
500
-
-
... More
Providing and Displaying plants Verbina in different colour having 30 to 45 cm ht., well developed with fresh & healthy foliage in bloom condition in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.
500
-
-
... More
Providing and stacking of Bottle palm of ht. 150-180 cm bottom girth 20-25 cm well developed in big poly bags of size 25 cm as per direction of the
officer-in-charge.
100
-
-
... More
Boring
HYDT: Cost of Drilling 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressureand equipmentsas well as fule, lubricantsand cost of transportation of rig machine annd other vehical up to Site.
(a) From 0.00 M to 50.00 M below G.L.
200
-
-
... More
HYDT: Cost of Drilling 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressureand equipmentsas well as fule, lubricantsand cost of transportation of rig machine annd other vehical up to Site.
(b) From 51.0 M to125.00 M
300
-
-
... More
HYDT: Cost of Drilling 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressureand equipmentsas well as fule, lubricantsand cost of transportation of rig machine annd other vehical up to Site.
(c) From126.0 M to150.00 M
300
-
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.
200 mm nominal size dia
100
-
-
... More
Development of tube well in accordance with IS : 2800 (part I) andIS: 11189, to establish maximum rate of usable water yield withoutsand content (beyond permissible limit), with required capacity aircompressor, running the compressor for required time till well isfully developed, measuring yield of well by "V" notch method or anyother approved method, measuring static level & draw down etc. bystep draw down method, collecting water samples & getting testedin approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessoriesetc., all as per requirement and direction of Engineer-in-charge
8
-
-
... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:
200 mm dia
8
-
-
... More
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 200 mm clamp
8
-
-
... More
Supplying 100mm dis submersible pump sets confirming to 8034 and motor confirming to IS 9283 pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller. Motor suitable for working on 415 + 10, 3HP, 50 Hz, AC supply with cable guard, thurst carbon/fiber bearing to withstand entire hydraulic thurst, water proof winding shall be provided. The pump set shall be suitable for diret coupling Pump shall have suitable outlet as per manufacturers design. Anti thurst stream lined non return valve shall be provided with pump, 3 meter submersible copper conductor cable in single/double run shall be provided with each pump.Submersible pump set 100mm dia (with Polypropylene/Noryl Impeller) up to 20 stages 2 HP
4
-
-
... More
Supply fitting and fixing of standered make starter pannel Board with arrangement of all necesssuray protection including all taxes ,royalty etc all complete job as per direction of E/I.
4
-
-
... More
Supplying fitting and fixing 3 crore 4 sqmm Flat copper submersible cable FINOLEX / HEVELS make including all taxes ,royalty etc all complete job as per direction of E/I.
520
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVCplain & brass threaded fittings This includes jointing of pipes & fittingswith one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
50 mm nominal outer dia Pipes
460
-
-
... More
Labour for laying, fitting and fixing NP2 R.C.C. spu pipe with colars in lines, level and grade and providing approved jointing materials and joints properly filled to make them leak, proof including providing sight rails, bonning rod, night guard, Red light and barrier etc. all complete as per specification and direction of E/I. 150mm dia RCC spun pipe - Upto 3.0 metre depth of invert below G.L.
240
-
-
... More
Labour for laying, fitting and fixing NP2 R.C.C. spun pipe with collars in lines, level and grade and providing approved jointing materials and joints properly filled to make them leak, proof including providing sight railsr[onninglod, night guard, Red lplrt and barrier etc. all complGas pfipecification and direCGdir of fr 250 mm Hume Pipe
810
-
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge
100 mm nominal size dia
120
-
-
... More
Supplying, filling, spreading & leveling stone boulders of size range5 cm to 20 cm, in recharge pit, in the required thickness, for allleads & lifts, all complete as per direction of Engineer-in-charge
13.35
-
-
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to10 mm, in the recharge pit, over the existing layer of boulders, inrequired thickness, for all leads & lifts, all complete as per directionof Engineer-in-charge
13.35
-
-
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mmto 2 mm in recharge pit, in required thickness over gravel layer, for all leads& lifts, all complete as per direction of Engineer -in-charge
13.35
-
-
... More
DT : Basic rates for 125/115mm dia drilled Tube-well for drilling in all kinds of soil and rock for installation of hand pump with DTH rig Machine all complete including supplying all materials, labours, tools, drilling, rigs, air compressor and equipments as well as fuel lubricant, for making 125/115 mm dia boring etc. and cost of transporting rig machine and other vehicle up to site of work as per specification and direction of E/I.. (Basic Rates)
Drilling upto 30 mtr. Depth below G.L. in Rural Area
120
-
-
... More
Supplying NP2 R.C.C. hume pipe with colour as work site as per direction of E/I.
250mm dia
4000
-
-
... More
Supplying materials and labour for construction of 600x600x900mm stop cock chamber of brick masonry with 125 mm thick work of designation 75B in cement mortar ('l:6) with 12mm thick cement
plaster in C.M. ('t:6) on inside only having 50 mm thick R.C.C. cover having '12 mm dia lifting rings, 2 nos. stop cock chamber will rest over SOmm thick P.C.C. (1:3:6) over ona brick flat soling, including cost of earthwork, all complete job, as per approved design, speci ficatlon and direction of E/1.
1333.33
-
-
... More
Excavation in Soil using Hydraulic Excavator CK 90 and Tippers with disposal upto 1000 metres. (Excavation for roadwork in soil with hydraulic excavator of0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m)
Including Royalty etc@ Rs. 27.48 per cum, cost of watering, rolling & compaction.
305038
-
-
... More
DG DISTRIBUTION BOARD FOR ADMIN BUILDING
Design, Fabrication, Supply, Erection,Testing and commisioning of Powder coated Indoor Type DG Dist. Board (DGDB), fabricated out of 14 guage CRCA sheet steel in cubical, compartmentallised, free standing , dust and vermin proof, (degree of protection-IP54)with reinforcement of suitable size angle iron, channel, T -iron or flats as required. Cable gland plates shall be provided on top as well as bottom of the panels. Panels shall be treated with all anti-corrosive process before painting as per specification. Panels shall be suitable for 415V, 3-Phase, Four wire, 50 Hz supply complete with earth bus and lifting hooks as required in case of large panels.Approval shall be taken for each panel before fabrication. (All hardwares like nuts and bolts used shall be Galvanized and Zinc passivated) as per Specification.
The DGDB shall broadly comprise of the following equipment/components)
Incoming Feeders:-
Incomer- 100A, TPN MCCB (P-2), 16 kA for 1 sec (Ics=100%Icu) Breaking capacity (Variable thermal rating 80-100%, variable magnetic rating 6-10 times) with factory made silver plated copper spreading links- 1 No.
Outgoing Feeders:-
63A TPN MCB 10kA - 06 Nos.
40A TPN MCB 10kA - 06 Nos.
300A TPN Copper bus bar in metal encolsure with fixing clamps
Indication lamps(On- Off Trip Power On -- RYB)
Supplying, Installing, Testing & Commisioning cost of DG Distribution Board (DGDB) for Admin building all complete with all necessary items as per direction of E/I.
1
-
-
... More
Design, Fabrication, Supply, Erection,Testing and commisioning of Powder coated Indoor Type Power Dist. Board (PDB), fabricated out of 14 guage CRCA sheet steel in cubical, compartmentallised, free standing , dust and vermin proof, (degree of protection-IP54)with reinforcement of suitable size angle iron, channel, T -iron or flats as required. Cable gland plates shall be provided on top as well as bottom of the panels. Panels shall be treated with all anti-corrosive process before painting as per specification. Panels shall be suitable for 415V, 3-Phase, Four wire, 50 Hz supply complete with earth bus and lifting hooks as required in case of large panels.Approval shall be taken for each panel before fabrication. (All hardwares like nuts and bolts used shall be Galvanized and Zinc passivated) as per Specification.
The PDB shall broadly comprise of the following equipment/components)
Incoming Feeders:-
Incomer- 315A, TPN MCCB (P-2), 50 kA for 1 sec (Ics=100%Icu) Breaking capacity (Variable thermal rating 80-100%, variable magnetic rating 6-10 times) with factory made silver plated copper spreading links- 1 No.
Outgoing Feeders:-
63A TPN MCB 10kA - 10 Nos.
400A TPN Copper bus bar in metal encolsure with fixing clamps
Indication lamps(On- Off Trip Power On -- RYB)
Supplying, Installing, Testing & Commisioning cost of Power Distribution Board (PDB) for Admin building all complete with all necessary items as per direction of E/I.
1
-
-
... More
DG DISTRIBUTION BOARD FOR CANTEEN BUILDING
Design, Fabrication, Supply, Erection,Testing and commisioning of Powder coated Indoor Type DG Dist. Board (DGDB), fabricated out of 14 guage CRCA sheet steel in cubical, compartmentallised, free standing , dust and vermin proof, (degree of protection-IP54)with reinforcement of suitable size angle iron, channel, T -iron or flats as required. Cable gland plates shall be provided on top as well as bottom of the panels. Panels shall be treated with all anti-corrosive process before painting as per specification. Panels shall be suitable for 415V, 3-Phase, Four wire, 50 Hz supply complete with earth bus and lifting hooks as required in case of large panels.Approval shall be taken for each panel before fabrication. (All hardwares like nuts and bolts used shall be Galvanized and Zinc passivated) as per Specification.
The DGDB shall broadly comprise of the following equipment/components)
Incoming Feeders:-
Incomer- 100A, TPN MCCB (P-2), 16 kA for 1 sec (Ics=100%Icu) Breaking capacity (Variable thermal rating 80-100%, variable magnetic rating 6-10 times) with factory made silver plated copper spreading links- 1 No.
Outgoing Feeders:-
63A TPN MCB 10kA - 02 Nos.
40A TPN MCB 10kA - 02 Nos.
300A TPN Copper bus bar in metal encolsure with fixing clamps
Indication lamps(On- Off Trip Power On -- RYB)
Supplying, Installing, Testing & Commisioning cost of DG Distribution Board (DGDB) for Admin building all complete with all necessary items as per direction of E/I.
1
-
-
... More
MAIN DISTRIBUTION BOARD-1 (MDB-1)
Design, Fabrication, Supply, Erection,Testing and commisioning of Powder coated Main Dist. Board-1( MDB-1) , fabricated out of 14 guage CRCA sheet steel in cubical, compartmentallised, free standing , dust and vermin proof, (degree of protection-IP54)with reinforcement of suitable size angle iron, channel, T -iron or flats as required. Cable gland plates shall be provided on top as well as bottom of the panels. Panels shall be treated with all anti-corrosive process before painting as per specification. Panels shall be suitable for 415V, 3-Phase, Four wire, 50 Hz supply complete with earth bus and lifting hooks as required in case of large panels.Approval shall be taken for each panel before fabrication. (All hardwares like nuts and bolts used shall be Galvanized and Zinc passivated) as per Specification.
The MDB shall broadly comprise of the following equipment/components)
Incoming Feeders:-
Incomer- 400A, TPN MCCB (P-2), 35 kA for 1 sec (Ics=100%Icu) Breaking capacity (Variable thermal rating 80-100%, variable magnetic rating 6-10 times) with factory made silver plated copper spreading links- 1 No. (For AC MAINS)
100A, TPN MCCB (P-2), 16 kA for 1 sec (Ics=100%Icu) Breaking capacity (Variable thermal rating 80-100%, variable magnetic rating 6-10 times) with factory made silver plated copper spreading links- 2 Nos. (For DG Supply & Changeover)
Outgoing Feeders:-
315A TPN MCCB (P-2), 50 kA for 1 sec (Ics=100%Icu) - 01 No.
160A TPN MCCB (P-2), 35 kA for 1 sec (Ics=100%Icu) - 01 No.
100A TPN MCCB (P-2), 16 kA for 1 sec (Ics=100%Icu) - 01 No.
63A TPN MCCB (P-2), 16 kA for 1 sec (Ics=100%Icu) - 01 No.
40A TPN MCCB (P-2), 16 kA for 1 sec (Ics=100%Icu) - 03 Nos.
400A TPN Copper bus bar in metal encolsure with fixing clamps
Indication lamps(On- Off Trip Power On -- RYB)
Supplying, Installing, Testing & Commisioning cost of Main Distribution Board-1 (MDB-1) all complete with all necessary items as per direction of E/I.
1
-
-
... More
MAIN DISTRIBUTION BOARD-2 (MDB-2)
Design, Fabrication, Supply, Erection,Testing and commisioning of Powder coated Main Dist. Board-2( MDB-2) , fabricated out of 14 guage CRCA sheet steel in cubical, compartmentallised, free standing , dust and vermin proof, (degree of protection-IP54)with reinforcement of suitable size angle iron, channel, T -iron or flats as required. Cable gland plates shall be provided on top as well as bottom of the panels. Panels shall be treated with all anti-corrosive process before painting as per specification. Panels shall be suitable for 415V, 3-Phase, Four wire, 50 Hz supply complete with earth bus and lifting hooks as required in case of large panels.Approval shall be taken for each panel before fabrication. (All hardwares like nuts and bolts used shall be Galvanized and Zinc passivated) as per Specification.
The MDB-2 shall broadly comprise of the following equipment/components)
Incoming Feeders:-
Incomer- 800A, TPN ACB (EDO-TYPE), 50 kA for 1 sec (Ics=100%Icu) Breaking capacity (Variable thermal rating 80-100%, variable magnetic rating 6-10 times) with factory made silver plated copper spreading links- 1 No. (For AC MAINS)
Outgoing Feeders:-
500A TPN MCCB (P-2), 50 kA for 1 sec (Ics=100%Icu) - 01 No.
315A TPN MCCB (P-2), 50 kA for 1 sec (Ics=100%Icu) - 01 No.
200A TPN MCCB (P-2), 50 kA for 1 sec (Ics=100%Icu) - 01 No.
800A TPN Copper bus bar in metal encolsure with fixing clamps
Indication lamps(On- Off Trip Power On -- RYB)
Supplying, Installing, Testing & Commisioning cost of Main Distribution Board-2 (MDB-2) all complete with all necessary items as per direction of E/I.
1
-
-
... More
MAIN DISTRIBUTION BOARD-3 (MDB-3)
Design, Fabrication, Supply, Erection,Testing and commisioning of Powder coated Main Dist. Board-3( MDB-3) , fabricated out of 14 guage CRCA sheet steel in cubical, compartmentallised, free standing , dust and vermin proof, (degree of protection-IP54)with reinforcement of suitable size angle iron, channel, T -iron or flats as required. Cable gland plates shall be provided on top as well as bottom of the panels. Panels shall be treated with all anti-corrosive process before painting as per specification. Panels shall be suitable for 415V, 3-Phase, Four wire, 50 Hz supply complete with earth bus and lifting hooks as required in case of large panels.Approval shall be taken for each panel before fabrication. (All hardwares like nuts and bolts used shall be Galvanized and Zinc passivated) as per Specification.
The MDB-3 shall broadly comprise of the following equipment/components)
Incoming Feeders:-
Incomer- 1000A, TPN ACB (EDO-TYPE), 50 kA for 1 sec (Ics=100%Icu) Breaking capacity (Variable thermal rating 80-100%, variable magnetic rating 6-10 times) with factory made silver plated copper spreading links- 1 No. (For AC MAINS)
Outgoing Feeders:-
200A TPN MCCB (P-2), 35 kA for 1 sec (Ics=100%Icu) - 03 Nos.
160A TPN MCCB (P-2), 35 kA for 1 sec (Ics=100%Icu) - 07 Nos.
100A TPN MCCB (P-2), 16 kA for 1 sec (Ics=100%Icu) - 13 Nos.
63A TPN MCCB (P-2), 16 kA for 1 sec (Ics=100%Icu) - 06 Nos.
1000A TPN Copper bus bar in metal encolsure with fixing clamps
Indication lamps(On- Off Trip Power On -- RYB)
Supplying, Installing, Testing & Commisioning cost of Main Distribution Board-3 (MDB-3) all complete with all necessary items as per direction of E/I.
1
-
-
... More
MAIN DISTRIBUTION BOARD-4 (MDB-4)
Design, Fabrication, Supply, Erection,Testing and commisioning of Powder coated Main Dist. Board-4( MDB-4) , fabricated out of 14 guage CRCA sheet steel in cubical, compartmentallised, free standing , dust and vermin proof, (degree of protection-IP54)with reinforcement of suitable size angle iron, channel, T -iron or flats as required. Cable gland plates shall be provided on top as well as bottom of the panels. Panels shall be treated with all anti-corrosive process before painting as per specification. Panels shall be suitable for 415V, 3-Phase, Four wire, 50 Hz supply complete with earth bus and lifting hooks as required in case of large panels.Approval shall be taken for each panel before fabrication. (All hardwares like nuts and bolts used shall be Galvanized and Zinc passivated) as per Specification.
The MDB-4 shall broadly comprise of the following equipment/components)
Incoming Feeders:-
Incomer- 400A, TPN MCCB (P-2), 35 kA for 1 sec (Ics=100%Icu) Breaking capacity (Variable thermal rating 80-100%, variable magnetic rating 6-10 times) with factory made silver plated copper spreading links- 1 No. (For AC MAINS)
Outgoing Feeders:-
200A TPN MCCB (P-2), 35 kA for 1 sec (Ics=100%Icu) - 01 No.
63A TPN MCCB (P-2), 16 kA for 1 sec (Ics=100%Icu) - 23 Nos.
400A TPN Copper bus bar in metal encolsure with fixing clamps
Indication lamps(On- Off Trip Power On -- RYB)
Supplying, Installing, Testing & Commisioning cost of Main Distribution Board-4 (MDB-4) all complete with all necessary items as per direction of E/I.
1
-
-
... More
FEEDER PILLAR
Design, Fabrication, Supply, Erection,Testing and commisioning of Powder coated Outdoor Type Feeder Pillar, fabricated out of 14 guage CRCA sheet steel in cubical, compartmentallised, free standing , dust and vermin proof, (degree of protection-IP54)with reinforcement of suitable size angle iron, channel, T -iron or flats as required. Cable gland plates shall be provided on top as well as bottom of the panels. Panels shall be treated with all anti-corrosive process before painting as per specification. Panels shall be suitable for 415V, 3-Phase, Four wire, 50 Hz supply complete with earth bus and lifting hooks as required in case of large panels.Approval shall be taken for each panel before fabrication. (All hardwares like nuts and bolts used shall be Galvanized and Zinc passivated) as per Specification.
The Feeder Pillars shall broadly comprise of the following equipment/components)
Incoming Feeders:-
Incomer- 40A, TPN MCCB (P-2), 16 kA for 1 sec (Ics=100%Icu) Breaking capacity (Variable thermal rating 80-100%, variable magnetic rating 6-10 times) with factory made silver plated copper spreading links- 1 No.
Outgoing Feeders:-
16A DP MCB - 15 Nos.
100A TPN Copper bus bar in metal encolsure with fixing clamps
0-24hrs Timer with 40A 3pole power contactor with 230V AC coil for automatic switching operation
Indication lamps(On- Off Trip Power On -- RYB)
Supplying, Installing, Testing & Commisioning cost of Feeder Pillar for pathway lighting all complete with all necessary items as per direction of E/I.
3
-
-
... More
Supply, installation, testing & commissioning of 80KVA Diesel Generator Set with AMF Panel. Brief description of the equipment shall be as follows:-
Diesel Engine 80 KVA
Engine shall conform to relevant IS/BS specifications and be complete with heat exchanger, reciprocating pump and cooling water pump, oil pump,diesel (fuel) tank, self-starting motor, batteries of adequate ampere hour capacity for self-starting and to give at least three attempts at one time. The engine shall be capable of developing required HP at site conditions and at 1500 RPM continuous duty. Speed regulation shall be such that from no load to full load, the variation in speed is minimum, say within 5%.
Alternator - The alternator shall conform to IS 4722 and IEC 34-1 and shall be of salient stationary pole revolving armature self-excited self compensated type and designed for 415 volts, 50 Hz, 3 phase output at 1500 RPM capacity of 40 KVA at 0.8 pf lag, at site condition. The voltage regulation shall not be more than 5% over the full load range including the 5% speed regulation of prime mover. The alternator shall be directlycoupled to the diesel engine through flexible coupling. The design shall be such that the harmonics are minimum. The power supply terminals including the neutral shall be brought out in a suitable cable entry box as directed.
Acoustic Enclosure - The generating sets are housed inside a high quality acoustic enclosure having salient features & constructional features such as
• Compact, modular construction and sleek design with low
noise level (75 dbA) at a distance of 1 meter in open
environment.
• Soundproof, weatherproof, and environment friendly
silent set.
• The acoustic enclosure is manufactured, powder coated
and lined with fire proof acoustic material light resin rock
wool as per international standards & meeting CPCB/Local PCB norms.
• Made out of 1.5 to 2 mm thick CRCA sheet, compact
sleek design confirming to international standards &
meeting CPCB/ Local PCB norms.
• Exhaust silencer to be of RESIDENTIAL grade type
mounted outside the enclosure, exhausting to
atmosphere.
Micro-Processor based AMF Control Panel: - The MicroProcessor based Control panel shall be designed for automatic on mains failure’ operation of the generator set. The panel shall be floor standing cubicle pattern, fabricated out of 14 & 16 SWG. M.S. Sheet and painted with powder coated of approved quality shade with appropriate ventilating arrangement. The panel shall be complete with the inter connections, insulators 2 numbers earthling plug and shall incorporate the following:
Selector Switch Voltmeter - OFF/RY/YB/BR
Ammeter 0-100 A
Selector Switch Ammeter - OFF/R/Y/B
Voltmeter 0-600 V
Frequency meter (Digital)
Set of current transformer of suitable ratio
Built-in SMPS Charger or boost cum trickle Battery
Charger consisting of-
(a) Transformer/Rectifier
(b) DC Ammeter
(c) DC Voltmeter
(d) Charging rate selector switch
Set of LED lamps for start failure, high temperature trip,
low oil pressure, high temperature warning, battery low,
load ON/OFF, set ON, R, Y, B etc.
Push buttons to start, stop, reset/alarm acknowledge
Digital KWh meter, 3ph, 4W, 415V AC
Digital KW meter, 3ph, 4W, 415 V AC
AMF relay with necessary protection Protection for AC Generator
Main supply voltage Monitor with under/over voltage adjustable
setting.
Set of control relays
Set of indicating lamp load on set, load on mains, Start failure,
high temperature trip, low oil
Pressure, high temperature warning, battery low.
Push buttons for start, stop, reset/alarm
acknowledge/DG/Mains supply
Contractors close/open and Test
Toggle Switch for hooter ON/OFF
3 phase 4 wire unbalanced type energy meter of suitable
capacity (complete with CTs).
1
-
-
... More
1.5 MLD Water Treatment Plant
Designing (aesthetically),providing constructing and commissioning conventional Water Treatment Plant consisting of all civil ,Mechanical and Electrical works including cost of providing and applying Epoxy paint to inside surface of water retaining structures in contact with chlorine and providing ant termite treatment to entire structure below ground level ,Mechanical and Electricals components of various sub works as given below ,including necessary hydraulic testing ,structural testing ,equipment testing and trial run for 3 months,etc. complete as directed by Engineer -in-charge.(Turn-Key Job).
Aeration Foundation : Plan area not less than 0.625 square meter per MLD
Ventury Flume : With necessary devices, consisting of simple mechanical indicator (Pedestal type guauge).
Flash Mixer : Rapid mixer device, detention time 60seconds to give velocity gradient 300 to 400 sec-I vane mixer type confirming to IS 7090 of 1985
Clarifier : Horizontal flow circul;ar tank , detention period 2.5 hours, overflow rate 30 cubic meter per square meter per day (to be specified), Weir loading not more than 300 cubic meter per meter per day, with mechanical sludge scraper confirming to I.S. 10313/1982 with necessary inlet outlet arrangement.
Rapid Sand Filters and Filter House : Filter deisgned for filtration rate of 5000 lit/m2/hr at normal flow minimum 2 beds for plant upto 10 MLD , for larger plants as specified , filters to be located in filter house with roof slab, pipe gallery and platform minimum 5.5 meter in width. With constant rate filtration or declining rate filtration.
a) Filter sand : Effective size 0.45 to 0.70mm , uniformity coefficient not more than 1.7, nor less than 1.3,m depth of water over sand 0.75m free board 50cm gravel 0.45m in depth sand and gravel confirming to I.S. 849 (I)-77 back wash by air wash . Standard appurtenances (to be specified).rate of flow controller, fitter gauge, sand expansion guage etc.
b) Wash Water Tank : capacity to be spacified and suitable to supply water to wash specified number of filter beds at a time 12 minute at 600 lit/M2/min under a head of 12 m at under drain.
c) Wash water Pumps : Capacity to fill water tank in one hour with 100% stand by
d) Air Blowers : Capable of delivering 600 LMP per square meter of free air, of filter area at 0.4 kg/scuare cm at the underdrains (100% stand by) for period of 5 min.
Chemical House in Two Storey's
a) Ground floor to accommodate 7 days alum requirement and sundry storage (minimum 4 m height)
b) First floor to accommodate alum and lime tanks chain pulley block etc. (minimum 5 m height)
c) Solution Tanks : Minimum 3 tanks (One for preparation , Second for dosing and third as standby), each tank capable of giving 8 hours maximum dose without interruption , minimum free board 0.30 M trays for dissolving , level indica tor mechanical agitation devices, solution feed device (Constant head device strength of solution upto 10% only) confirming to I.S.9222 part-I/1979.
Pure water Sump and Pump House
a) Capacity of sump : One hour of deisgned flow.
b) Pump House : Pump house of required size over the sump or by the side
Store House : Suitable for alum storage of three months and 7 days temporary storage , 7 days TCL requirement in mansoon with 20% extra capacity for other sundry articles
Vacuum feed type chlorinators : make to be approved by MJP
a) confirming to I.S. 10533- A part - II 1983
b) Rate of withdrawal
Degree C Cylinders 45 67
10 6.35 9.5
15 10.75 16.1
20 15.5 21.24
27 & 18.7 28.12
Above
c) Chlorinator and equipment and container room : to conform to I.S. 10553 Part - I 1983
d) 100% standby shall be provided
By pass arrangement - C.I or MS pipes
i) By passing all units of TP
ii) By passing flash mixer, clariflocculator.
iii) By passing flash mixer, clariflocculator and filter
Disposal of waste from WTP : Safe disposal arrangement to nearby nalla including cost of pipes.
For WTP of capacity 30 mld and more additional arrangement for backwash water recycle shall be provided , including sump, pumping machinery, rising main etc. complete.
Drainage arrangement : To decant all units of WTP with CI pipes upto boundary of each unit and further extension with RCC pipes to nearby nalia.
Electrical Installation : Both internal and external including entire plant area.
Laboratory equipment : as per requirement (to be specified during tendering)
Sanitary Blocks : Carpet area - 15 square meter minimum upto 25 MLD
Administrative block and Internal road.
To accommodate office room, chlorine room, laboratory room, panel board room, blower room etc. and all required internal WBM road to connect all units from main gate of plot.
Rates given below are inclusive of uplift pressure if any and dewatering during entire work.
Disposal of waste from WTP : Safe disposal arrangement to nearby nalla including cost of pipes.
All pipes conducts channel with 20% over loading.
For WTP of capacity 30 mld and more additional arrangements for backwash water recycle shall be provided, icluding sump, pumping machinary, rising main etc. complete
These rates are applicable for seismic zones 2, 3 and 4.
All RCC structure shall be constructed in M.300
Note: Conditions from Sr. No. 1 to 19 shall form a part and parcel of the tender and must be incorporated in draft tender papers of conventional treatment plants (proposed).
for 1.5 MLD
1.5
-
-
... More
Mechanical & Electrical Works at WTP
Supply, installation, testing and commissioning of Horizontal split casing centrifugal pumpsets with allied equipment as under-
Horizontal Split Casing Centrifugal Pump [make: Kirloskar/Jyoti/ Worthington/ Mather & Platt] , capable of discharging -16.50 LPS, against the head of 35 m. mounted on common base plate and coupled with SPDP, Eff1, squirrel cage induction motor, rating of motor 5% more BHP than that of pump, operating on 1500 rpm, 415V,50Hz [make: Kirloskar /ABB/ Jyoti/Crompton Greaves /BHEL] pressure gauge, required size of sluice valve and non-return valve, standard fittings etc.including construction of MS Suction and delivery header, jointing it with Suction and Delivery line by providing required MS/CI pipes, flanges,reducer and specials, nuts bolts, packings etc. all complete as per the requirement, standards and instruction of E/I.(Note-Contrator will again have to check the design of motor & pump and get it approved by the Deptt.)
discharging -16.50 LPS, against the head of 35 m.(1W+1S)
2
-
-
... More
Main Power Distribution Panel cum MCP for Clear Water to be installed at WTP:- Floor mounted cubical LT Motor Control Panel board fabricated with MS sheet of suitable guage and size ,dust and vermin proof and painted consisting of proper power distribution 4 pole 200A copper busbar, 3 no. incoming feeder of 200A ACB, 4 nos. 100 A MCCB for outgoing feeder of clear water pump sets (with spare feeder), 2 nos. 100 A & 63 A MCCB for WTP. & other Utilities,2 nos. 32 A MCB for lighting feeder [ MCCB make:L&T/ABB/ Siemens/ HPL], 2 nos.Suitable Fully automatic star delta starter [make:- L&T/Jyoti/ Siemens/ Schnieder] suitable for above H.P. , switch disconnected isolator (TPN) rated (250A-415V), selector switches, Volt-meters, Ampere-meters, indicator lamps etc. all complete with internal wiring, protection units/relays and capacitor banks of proper KVAR for Power Factor .improvement for pump sets and other equipments ,etc all complete as per site requirement ,Instruction of E/I. and IE rules.(Note-Contrator will again have to check the design of Panel and get it approved by the Deptt.)
1
-
-
... More
Providing,ereeting fire extingusher,firstaid box,etc. all safty Items as per requirement & Direction of E/I.(for both pumping Plant.)
1
-
-
... More
Power wiring with required 95 Sq mm 3.5 core 1.1KV grade armoured Aluminium Cables, XLPE/PVC insulated armoured cable from Transformer to MCP at Clear Water Pump House. Laying, jointing and making proper terminations,etc. all complete.
100
-
-
... More
Power wiring with required 16 Sq mm 3 core 1.1KV grade unarmoured Copper cables, XLPE/PVC insulated armoured cable from Power distribution Panel (MCP) to Motors, including laying on wall or on floor as where required, jointing and making proper terminations,etc. all complete.
50
-
-
... More
Earthing: making earthing as per IE Rule for each motors.
2
-
-
... More
Lightening Arrester: installation of lightening Arrester over pump house for Clear Water pumping plant as per IE rule.etc.all complete.
1
-
-
... More
Cost of 3T Triple spur type chain pulley block suitable as below with 6m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per IS 3832 carry ISI etc. all complete job.
1
-
-
... More
Supplying, installation & commissioning of 63 KVA, 11/0.433 KV Copper wound distribution transformer for Clear Water Pumping Plant at WTP. [make: KEC /BHEL /CGL/ABB] with off load tap changer, including cost of initial filling of transformer oil including all taxes on the recommended loading of transformer maximum 80% etc. all complete job and as per site requirement and as per the direction E/I.
1
-
-
... More
Cost of construction of DP structure with different type of MS channels, M.S. angles, brackets, insulators, three set of horn gap & do fuse and lightening arrester, nut bolts, fabrication work required for the job, cost of earthing of transformer (Two nos., one no. for neutral and one for body) with all required material labours, cost of providing disc & pin insulator for HV and LV side of the transformer, testing of dielectric strength of transformer oil etc. for transmission of power. All complete job as per I.E.rules and specification of Jharkhand state electricity board etc. all complete installation of transformer as per IE rules.
1
-
-
... More
Compound Wall With Gate for WTP+ ESR =300 Mtr.
E / W i n e x c a v a t i o n i n foundation trenches in ordinary soil (vide classification of soil i t e m - A ) & d i s p o s a l o f excavated earth obtained to a distance up to 50 M including all lift leveling ,ramming the foundation trenches removing root of trees, shurbs all complete as per approved design building specification and direction of E/I.
186.83
-
-
... More
PCC 1:3:6 in Foundation (Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.)
13.97
-
-
... More
Furnishing and Placing Reinforced/Prestressed cement concrete in super-structure as per drawing and Technical Specification.
RCC Grade M20, For solid slab super-structure.
28.74
-
-
... More
Furnishing and Placing Reinforced/Prestressed cement concrete in super-structure as per drawing and Technical Specification.
RCC Grade M20, For solid slab super-structure.
26.72
-
-
... More
Furnishing and Placing Reinforced/Prestressed cement concrete in super-structure as per drawing and Technical Specification.
RCC Grade M20, For solid slab super-structure.
20.25
-
-
... More
Providing designation 75 A brick work in C.M. (1:6)in f o u n d a t i o n & p l i n t h w i t h approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints ,cost of screening ,materials ,scaffolding ,raking out joints to 15 mm depth curing ,taxes & royalty all complete as per building specification & direction of E/I
128.01
-
-
... More
Providing 12 mm thick cement plaster (1:6) with approved quality of clean coarse sand of F.M. 1.5 including screening . Curing with all leads & lifts of water ,scaffolding ,taxes royalty all complete as per b u i l d i n g s p e c i f i c a t i o n & direction of E/I.
1068.62
-
-
... More
Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications
5.94
-
-
... More
Providing all materials ,labors & d o i n g White washing three coat over new surface with approved quality of lime including cost of cleaning surface thoroughly and removing the scales of smoke & ash marks with jhama rubbing, scaffolding washing of floor sand taxes all complete as per building specification and direction of E/I.
1068.62
-
-
... More
Supplying Fitting and Fixing M.S. Grill gate made of 20*6 mm M.S. Flat fitted on 25mm *25 mm 6 mm M.S. angle frame as per approved design & drawing, properly fabricated with joints continuous fillet welded & finished smooth, providing necessary locking arrangements with Haskell including cost of fabrication & dummy duly fixed in C.C. 1:2:4) blocks of required size applying a red lead paints over steel works, taxes, carriage of grill to work site, as per the building specification & direction of E/I. ( w h e r e m a t e r i a l s is n o t supplied by the Dept.)
Grill Gate @ 63 kg per Sqm
5.44
-
-
... More
Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing rust, dirt, scales, smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I.
5.44
-
-
... More
Providing 2(two) coats of Painting with ready mixed paints of approved shade & make over steel surface including cleaning the surface thoroughly, scaffolding & taxes all complete as per building specification & direction of E/I.
5.44
-
-
... More
Brick upto 20 KM
27.27
-
-
... More
Steel upto 10 km
2.72
-
-
... More
Sand upto 10 KM
45.26
-
-
... More
Chips upto 11 KM
37.19
-
-
... More
Cement Upto 10 KM
5.72
-
-
... More
Clear Water Rising Main of 150mm dia DI K-7 from WTP to ESR
Providing & Supplying centrifugally ISI Mark Centrifugally cast (spun) ductile iron pipe of 100mm and above all diameter for water works with socket and spigot ends confirming to IS8329/2000 in standard working lengths of 4.5, 5.5 & 6 m suitable for classification K-7 suitable for push on joint (Rubber gasket D jointing) with cement mortar lining on inside surface and outside zinc and bituminous coating. Including all other taxes insurance carriage to work site with loading Unloading etc. (Note The rate of F.O.R at work site in jharkhand including Royality, inspection, C.P and other taxes. )
Class K-7
150 mm
350
-
-
... More
Supplying labours, tools and tackles for testing of laid DI/UPVC/HDPE/ AC pressure pipes upto 60 m head of water all complete as per specification and direction of E/I.
150mm
350
-
-
... More
Providing and supplying ISI standard D.I. specials & fitting with sealing rubber gasket of S.B.R. complete with cast iron follower gland and M.S. nut & bolts coated or otherwise protected from rusting and suitable for D.I. pipes including ED, CST all taxes e t c . complete as per I.S. 9523 (Including 10% C.P and 5% OHC) as per item-4
100 to 150 mm dia.
249.6
-
-
... More
Providing Double Flanged Sluice valve confirming for IS 2906/14846 including worn gear arrangements as per test pressure stainless steel spindle caps including all taxes transportation etc.complete. With including 10% CP with E.D
Sluice valve PN 1.6 150 mm (without Byepass arrangement)
3
-
-
... More
Providing and supplying Kinetic Double Orifice type Air Valves confirming to IS 14845 as per MJP’s standard specifications combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unloading, transportation upto departmental stores, excluding GST levied by GOI & GOM in all respect etc. complete
80mm dia
1
-
-
... More
Earth Work in excavation (As per I.S. 3114/1965) for laying of Different types and size of pipes so as to give one meter average cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per specification and direction of Engineer in-charge (b) For classification of soil item -B
229.31
-
-
... More
Earthwork in excavation of foundation trenches as per designed section in ordinary or soft rock (vide classification of soil item C ) and disposel of excavated material so obtained (50 m awaty from the edge of the trenches ) with in initial lead of 150 m and initial lift of 1.5 M as per specification and direction of E/I.(in ordinary or soft rock where blasting is not required)
57.32
-
-
... More
Supplying labours, tools, tackles, lubricant etc. for laying and jointing C.I.S/S tyton pipes (class LA) /D.I. pipe in trenches supplying rubber gasket (Rubber gaskets confirming to I.S.S.- 5382- 1969) and making gasket joints including providing night guard,barrier and red light to safe guard against accident, all complete (Pipe to be suppllied departmenatlly free of cost and laying of pipes is to be done as per I.S.S.3114-1985) as per design, specification and direction of E/I.
Class K-7 with Rubber ring
150 mm
350
-
-
... More
Labour charge for one cutting of DI / CI pipes and specials including supplying, necessary tools and plants, chipping or refilling the surface finish as per specification and direction of E/I
Class K-7
150mm
3
-
-
... More
Supplying labour & tools for fixing Kinectic double orific type Air valve in trenches as per specification and direction of E/I. ( Air valve to be supplied departmentally free of cost).
80 mm dia
1
-
-
... More
Supplying Labour and tools for fixing cI sluice valve trenches with a pair of cI Tail pair including making) flanged joints as per I.S. specification, including flanged joints as per IS specification confirming to I.S.S. 782 – 1978 confirming to I.S.S. 6587 – 1972 and nuts and bolt confirming to I.S.S. 1364 – 1983). Including drilling holes in flanged if required as per specification and direction of E/I. (Sluice valve and pieces to be supplied departmentally free of cost).
150 mm
3
-
-
... More
Providing and supplying ISI mark CI D/F reflux valve (non return valves) of following dia with inspection charges, unloading from railway wagon, loading into truck transportation upto departmental store/site unloading stacking etc. complete reflux valve as per IS 5312 part 1( 1984) without bypass arrangement PN-1.6
150 mm
1
-
-
... More
Supplying Labour and tools for fixing Non return valve trenches with a pair of cI Tail pair including making) flanged joints as per I.S. specification, including flanged joints as per IS specification confirming to I.S.S. 782 – 1978 confirming to I.S.S. 6587 – 1972 and nuts and bolts confirming to I.S.S. 1364 – 1983). Including drilling holes in flanged if required as per specification and direction of E/I. 150mm (PN-1.6 with byepass arrangement.)
1
-
-
... More
Earthwork in back filling the trenches after laying different types and sizes of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge ( for classification of Soil item A & B )
229.32
-
-
... More
S u p p l y a l l m a t e r i a l s & construction of Thrust Block where required
1
-
-
... More
Construction of B.W. masonry valve chamber as per enclosed annexure (1.2m X.9m X1.5m )
5
-
-
... More
Providing, installing and giving satifactory field testing of flanged ends bulk water meter of following type and as mentioned below with FGI-250 cast iron body, class :B" conforming to IS:2373, to read in metric system,alongwith manufacturer's test and guarangee certificate including cost of all materials and labour with ISI mark etc. complete. (At ESR)
1
-
-
... More
Name of the Scheme and other details on the 2,00,000 Litre Capacity E.S.R. (18.0 M Staging)
Designing (aestheticalyy) , and Constructing Rcc elevated Service reservoirs of following capacity with RCC staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 meters centre to centre of E.S.R having capacity above 500 m3 & not more than 6 m c/c of E.S.R having capacity 500 m3 including excavation in all types of strata, foundation concrete, cement plaster with water proofing compound to the inside face of the container including refilling disposing of the surplus stuff within a lead of 50 meters, all labour and material charges including lowering, laying, erecting hoisting and jointing of pipe assembly of inlet, outlet wash out over flow and bypass aeeangement as per approved design. providing and fixing acessories such as ms ladder ct manhole frame and cover, water level indicator. lightning conductor GI pipes railing around walk way and top floor slab, providing spiral stair case from ground level to roof level ,M.S Grill Gate of 2 Mtrs height with locking arrangement , of approved design, BB , masonary chambers for all valves , ventilating shaft , providing and applying there coats of cement paint to the structure including roof slab and epoxy paint to internal surface & anti -terminate treatment for underground parts of the structure and giving satisfactory water tightness test as per I.S code , Then Job to including painting the name of the Scheme and other details on the reservoir as per the direction of Engineer -in- charge including Landscaping, Gardening & Plantation etc.
reservoir as per the direction of Engineer -in- charge including Landscaping, Gardening & Plantation etc.
The Design of the structure be in accordance with relevant (I.S.3370-2009 or revised)
The design shall satisfy the stipulation as per I S 1893 - 1984 and I.S. 13920/1993 for seismic force and I.S. - 11682/ 1985 for R.C.C. staging of overhead tanks.
For design having more than 6 columns, providing of internal bracing is obligatory, External bracing is also obligatory.
The entire structure shall be in M/250 mix only. However concrete in contact with water such as container, base slab, wall, roof slab & footing in water borne area shall be M-300.
Plain round mild steel bars grade-I confirming to I.S., 432 Part-I or high yield strength deformed bars confirming to I.S. 1786 or I.S. 1139 shall be used, grade-II mild steel bars will not be allowed.
Irrespective of the type of foundation proposed in the design, one set of bracing be provided at the ground level.
These rates are include providing ,M.S ladder for E.S.R's upto 2 lakhs Litres Capacity and Providing spiral staircase for E.S.R. above 2 lakhs liters capacity.
Staging shall be designed with stresses of M-200 for ESR. However all RCC construction should be done in M-250 extra Concrete in contact with water shall be designed & constructed in M=300
These rates are including the cost of uplift pressure if any and entire dewatering during execution. In case of water logging area where water is struck at shallow depth extra" provision of dewatering shall be made as per site condition.
All condition given in the Member Secretary’s Circular No. MJP/TS - I / 350 / 1668 dt .
2.08.97 and MJP/S-I/350/2127 dt. 13.7.99 shall be strictly followed and additional cost is any due to these conditions is included in ratio mentioned below.
75%part rate shall be payable for reinforced concrete and plastering items of containers of E.S.R. till satisfactory hydraulic testing for water tightness is given ; and till that work shall be treated as incomplete
The rates indicated in the table are excluding the cost of pipes, specials and valves required for in l e t , o u t l e t washout overflow and by - pass arrangement . The scope of work , however includes cost of erecting , laying and jointing of pipes and valves including cost of jointing materials upto 5M beyond outer face of outermost column.
For ESR upto 500 cum capacity C.I.D. double flanged pipes upto 300mm dia shall be provided and C.I. Specials shall be used . For ESR above 500 cum capacity C.I./M.S . pipes assembly with minimum 8 mm thickness upto 500mm dia and in min. 10mm above 500mm dia can be used with proper anti-corrosive epoxy treatment from inside and outside. Below mentioned rates are for foundation, with individuals footing with bearing capacity of 30 tonnes per square meter. For raft foundations , these rates shall be increased by 7.5% where safe bearing capacity (SBC) is 5M.T, per Sq.m and by 5% where SBC is more than 5MT/ Sqm. and upto 10 MT / Sq.m This percentage of 5% or 7.5% is applicable for estimation of amount of L.S. items ESR for Extra item due to change from individual footing foundation to raft actual increase in concrete and steel quantities be paid as per relevant DSR Item
The rates shall be increase by 30% for bearing piles upto depth of 10m and for further increased in depth by 5M each it shall be increased by another 10% These rates are applicable where raft is not feasible for pile foundation sulphate resistant cement shall only be used . Single Pile for the column is not permitted Group of piles shall be designed with pile cap for each column of ESR.
These rates are applicable for staging height of 12 M. These rates shall be increased or decreased for per metre variation in the staging height as below
For 18m staging Height
Conditions from Sr.No.1 to 10 shall form a part and parcel of the tender papers and must be included in the draft tender papers for works of R.C.C. E.S.R.
Conditions from Sr.No.11 to 16 are for estimation purpose only and shall not appear in the tender.
The design of the structure be in accordance with relevant (I.S. 3370 - 2000 or revised)Cost of 2,00,000 litres capacity
1
-
-
... More
Distribution System and Appurtenant Works Earth Work in excavation (As per I.S. 3114/1965) for laying of Different types and size of pipes so as to give one meter average cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per specification and direction of Engineer in-charge (b) For classification of soil item -B
Add Extra for 5% for Socket
1288.32
-
-
... More
Earthwork in excavation of foundation trenches as per designed section in ordinary or soft rock (vide classification of soil item C ) and disposel of excavated material so obtained (50 m awaty from the edge of the trenches ) with in initial lead of 150 m and initial lift of 1.5 M as per specification and direction of E/I.(in ordinary or soft rock where blasting is not required)
322.08
-
-
... More
Earthwork in back filling the trenches after laying different types and sizes of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge ( for classification of Soil item A & B )
1449.36
-
-
... More
Providing and supplying in standard lengths High Denaity Polyethylene Pipe (HDPE Pipe) confirming to IS 4984-4984/12786/13488 (Latest Revision with necessary jointing materials like mechanical connector ie thread/insert joint/ quick release coupler joint/compression fitting joint or flanged joints excluding coupler/specials and taxes (Note- The rates of F.O.R at worksite in jharkhand including royality ,inspection and C.P charges.)
HDPE PE -100 PN 10
75mm
960
-
-
... More
90mm
350
-
-
... More
110mm
460
-
-
... More
140mm
130
-
-
... More
160mm
200
-
-
... More
180mm
340
-
-
... More
Providing and Supplying of all required Special /couplers (tee/bends etc.) etc. for laying of H.D.P.E Pipe line
75 to180 mm dia.
1
-
-
... More
Supplying labours and tools for laying and jointing H.D.P.E pipes in trenches and making butt welded joint supplying heating mirror, jack etc and providing night guard barrier and red light to safe guard against accident all complete as per specification and direction of E/I (H.D.P.E pipes will be supplied departmentally free of cost).
H.D.P.E pipes
upto 90 mm dia
1310
-
-
... More
above 90 mm upto 110 mm dia
460
-
-
... More
above 110 mm up to 140 mm dia
130
-
-
... More
above 140 mm upto 160mm dia
200
-
-
... More
above 160 upto 210 mm dia
340
-
-
... More
Supplying labours, tools and tackles for testing of laid C.I. or U.P.V.C. or H.D.P.E. or A.C. pressure pipe upto 60metre head of water all complete as per specification and direction of E/I. (Water to be supplied free of cost departmentally).
H.D.P.E pipes
upto 90 mm dia
1310
-
-
... More
above 90 mm upto 110 mm dia
460
-
-
... More
above 110 mm up to 140 mm dia
130
-
-
... More
bove 140 mm upto 160mm dia
200
-
-
... More
above 160 upto 210 mm dia
340
-
-
... More
Labour charges for one cutting of H.D.P.E/U.P.V.C/A.C pressure pipe including supplying, necessary tools and plants, chipping or filling the surface finish as per specification and direction of E/I
H.D.P.E
above 110 mm up to 140 mm dia
1310
-
-
... More
above 90 mm upto 110 mm dia
460
-
-
... More
above 110 mm up to 140 mm dia
130
-
-
... More
above 140 mm upto 160mm dia
200
-
-
... More
above 160 upto 210 mm dia
340
-
-
... More
Providing Double Flanged Sluice valve confirming for IS 2906/14846 including worn gear arrangements as per test pressure stainless steel spindle caps including all taxes transportation etc.complete. With including 10% CP with E.D
With bypass arrangements PN-1
80mm
5
-
-
... More
100mm
1
-
-
... More
150mm
2
-
-
... More
Supplying Labour and tools for fixing cI sluice valve trenches with a pair of cI Tail pair including making) flanged joints as per I.S. specification, including flanged joints as per IS specification confirming to I.S.S. 782 – 1978 confirming to I.S.S. 6587 – 1972 and nuts and bolts confirming to I.S.S. 1364 – 1983). Including drilling holes in flanged if required as per specification and direction of E/I. (Sluice valve and pieces to be supplied departmentally free of cost).
Sluice Valve
80mm
5
-
-
... More
100mm
1
-
-
... More
150mm
2
-
-
... More
Construction of B.W. masonry valve chamber as per enclosed annexure (1.2m X.9m X1.5m )
8
-
-
... More
Providing ,coarse clean sand in filling in foundation trenches/in plinth including ramming & watering in layers not exceeding 150 mm thick with all leads & lift, including cost of all materials ,labour ,royalty & taxes all complete as per b u i l d i n g s p e c i f i c a t i o n & direction of E/I.
134.2
-
-
... More
Supplying transporting, the S.P. fire hydrants including duck foot bend, S.V. and S.V. road box, painting the hydrant,fixing the saddle piece, supplying, and laying required length of C.I. pipeline and jointing the same spun yarn, molten lead including caulking, fixing the S.V. road box in one brick masonry chamber in 1:5 C.M. with 12 mm thick 1:3 cement plaster both inside and outside on 1:3:6: C.C.150 mm thick etc, complete specified and directed. [As per I.S.900/1965 Revised]
1
-
-
... More
SEWAGE SYSTEM
Earth Work in excavation (As per I.S. 3114/1965) for laying of Different types and size of pipes so as to give one meter average cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per specification and direction of Engineer in-charge (b) For classification of soil item -B
4783.82
-
-
... More
Earthwork in excavation of foundation trenches as per designed section in ordinary or soft rock (vide classification of soil item C ) and disposel of excavated material so obtained (50 m awaty from the edge of the trenches ) with in initial lead of 150 m and initial lift of 1.5 M as per specification and direction of E/I.(in ordinary or soft rock where blasting is not required)
1993.64
-
-
... More
Filling in foundation trenches and plinth in layers not exceeding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained after cutting within a lead of 50M and lift of 1.5M all complete as per building specification and direction of E/I.
6047.46
-
-
... More
Close timbering in trenches including strutting. Shoring and packing cavities (wherever required) depth not exceeding 1.5 mtr complete as per specification and direction of Engineer in charge (measurement to be taken of the face area timbered )
275.63
-
-
... More
Close timbering in trenches including strutting. Shoring and packing cavities (wherever required) for each additional depth of 1.5 mtr complete as per specification and direction of Engineer in charge (measurement to be taken of the face area timbered )
154.36
-
-
... More
Close timbering in case of shafts, wells, cesspits, manholes and the like including strutting, shoring and packing cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered).
84.49
-
-
... More
Steel shoring in Manhole,shafts, wells, cesspits including strutting , shoring and packing cavities where required complete including all material, labour, tools etc. with all lead and lift complete in all working conditions like subsoil, water etc. and as directed by the Engineer -in-charge. (Measurement to be taken of the face area provided with shoring)
288.49
-
-
... More
RCC (NP3) Pipe
Providing at site, lowering & laying in trenches, aligning & jointing of RCC pipes NP3 class (with s/s ends) IS: 458 - 1988 (amended up to date) marked and pipes from 300 mm upto 2000 mm manufactured through vertical casting process all levels with Rubber gaskets (EPDM/SBR) for sewer lines as per IS: 5382 (including cost of Rubber gaskets lubricants) as per drawing, sectional hydro testing of the sewer pipe line (including cost and conveyance of water to site for testing) etc., complete as directed by Engineer.
250 mm dia (ID)
965.2
-
-
... More
RCC (NP3) Pipe
Providing at site, lowering & laying in trenches, aligning & jointing of RCC pipes NP3 class (with s/s ends) IS: 458 - 1988 (amended up to date) marked and pipes from 300 mm upto 2000 mm manufactured through vertical casting process all levels with Rubber gaskets (EPDM/SBR) for sewer lines as per IS: 5382 (including cost of Rubber gaskets lubricants) as per drawing, sectional hydro testing of the sewer pipe line (including cost and conveyance of water to site for testing) etc., complete as directed by Engineer.
300 mm dia (ID)
882
-
-
... More
Add extra for manufacturing of RCC pipe with Sulphate Resistant Cement instead of OPC/PPC cement
250 mm dia (ID)
965.2
-
-
... More
Add extra for manufacturing of RCC pipe with Sulphate Resistant Cement instead of OPC/PPC cement
300 mm dia (ID)
882
-
-
... More
Bedding Providing PCC M 10 in foundation in bedding with nominal mix of (1:4:8) approved quality of stone metel 50 mm to 40 mm size graded and locla river sand (washed and screened) including screening,shuttering, mixing, cement concretein mixer and placing in possition,vibrating, striking,curing ,taxes and royaity all complete
48.79
-
-
... More
Providing PCC M 15 in foundation in bedding with nominal mix of (1:2:4) approved quality of stone metel 50 mm to 40 mm size graded and locla river sand (washed and screened) including screening,shuttering, mixing, cement concretein mixer and placing in possition,vibrating, striking,curing ,taxes and royaity all complete
33.26
-
-
... More
Providing coarse clear sand in filling in foundation trances or in plinth including raminig and watering in layers not exceeding 150 mm thick with all leads and lift including cost of all material labour royalituy taxes all complete as per building specification and direction of E/I (more of measurment is compected volume)
251.45
-
-
... More
Carriage Rate of materials
Cement
18.43
-
-
... More
Sand
290.01
-
-
... More
Aggregates stone chips
81.57
-
-
... More
Timber
7.5
-
-
... More
Extra for laying concrete in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.
0.47
-
-
... More
Brick Manholes
Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design.
0.91 m deep with S.F.R.C. cover and frame (heavy duty,HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete.With Sewer bricks conforming to IS : 4885
6
-
-
... More
Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91 m to 1.67 m
3.29
-
-
... More
Inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement
19.76
-
-
... More
Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design. 1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately),With Sewer bricks conforming IS : 4885
16
-
-
... More
Extra depth for circular type manhole 1.22 m internal dia (at bottom) beyond 1.68 m to 2.29 m
5.23
-
-
... More
Inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement
44.98
-
-
... More
Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design
2.30 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete.(Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately),With Sewer bricks conforming IS : 4885
37
-
-
... More
Extra depth for circular type manhole 1.52 m internal dia (at bottom)beyond 2.30 m
34.2
-
-
... More
Inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement
124.68
-
-
... More
Providing orange colour safety footrest of minimum 6 mm thick plastic encapsulated as per IS: 10910 on 12 mm dia steel bar conforming to IS: 1786 having minimum cross section as 23 mm x 25 mm and overall minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to withstand the bend test and chemical resistance test as per specifications and having manufacturer's permanent identification mark visible even after fixing, including fixing in manholes with 30 x 20 x 15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
546
-
-
... More
Sewage Treatment Plants
Construction of 0.8 MLD ETP cum STP including all civil, Electromechnical Work and realated work etc. as per Specificaiton mentioned in Tender Document
0.8
-
-
... More
GST @ 18%
0.18
-
-
... More
Labour Cess @ 1%
0.01
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements