Jharkhand Industrial Area Development Authority Tender

Painting of riser, hydrants,etc.with synthetic enamel Post Office Red paint two coats with primer,etc. as required of repute make Asian Paints/ Bergar Paints 200 mm dia.

Providing and fixing M.S. pipe to I.S. 1239 (Heavy class) complete with all supports & fittings like, unions, couplings, bends, elbows, tees, offsets,reducers, flanges as per table 'E' etc. to complete the work as per the requirement at site including painting with one coat of primer after surface preparartion and two coats of synthetic enamel paint, cutting and making good the walls good complete. Pipe upto 40 mm dia threaded joints with holdtite, 50 mm dia and above should be welded joint ( all type ) ( internal works/External Works). Make TATA/JINDAL/HISSAR/PRAKASH/SURYA/SAIL. 80 mm dia.

Providing and fixing M.S. pipe to I.S. 1239 (Heavy class) complete with all supports & fittings like, unions, couplings, bends, elbows, tees, offsets,reducers, flanges as per table 'E' etc. to complete the work as per the requirement at site including painting with one coat of primer after surface preparartion and two coats of synthetic enamel paint, cutting and making good the walls good complete. Pipe upto 40 mm dia threaded joints with holdtite, 50 mm dia and above should be welded joint ( all type ) ( internal works/External Works). Make TATA/JINDAL/HISSAR/PRAKASH/SURYA/SAIL. 100mm dia

Providing and fixing cast iron dual plate wafer type non return valves of PN1.6 including nuts, bolts,1.5mm thick compressed asbestos gasket including matching flanges as per table "E" complete. 100 mm dia.

Providing and fixing cast iron dual plate wafer type non return valves of PN1.6 including nuts, bolts,1.5mm thick compressed asbestos gasket including matching flanges as per table "E" complete. 80 mm dia.

Providing and fixing C.I. butterfly valves PN 1.6 complete with bolts, nuts 1.5mm thick compressed asbestos gasket companion flanges as per table "E" complete. 100 mm dia with lever

Providing and fixing C.I. butterfly valves PN 1.6 complete with bolts, nuts 1.5mm thick compressed asbestos gasket companion flanges as per table "E" complete. 80 mm dia. With lever

Providing and fixing brass ball valve (full bore type) with plastic coated lever and screwed female ends tested to 20 Kg/ cm2 of approved quality as specified. 25 mm dia.

Providing and fixing dial type pressure gauge with isolation cock and copper pipe at hydrant station. Dial diameter 100 mm calibration 0-15 kg/ sq.cm.

Providing and fixing gunmetal single acting air release valve with screwed inlet 25 mm dia..

Providing and fixing SS - 304 single headed landing valve conforming to IS -5290 (Type-A) with 63 mm dia. single instantaneous female coupling on the outlet SS316 metal blank cap and chain, necessary companion flanges, nuts, bolts, washer and gasket complete as per specification. (ISI marked). All parts and body shall be of SS316 as per IS:5290. Single outlet

Providing and fixing first aid fire hose reel drum wall mounting, swinging type(Powder coated finish in fire red) fitted with 20 mm dia. 30 m long high pressure hose(IS:444, Type-2) with 5 mm outlet SS nozzle with shut off valve (IS:8090). complete hose reel drum shall be conforming to IS:884)

Providing and fixing 63 mm dia. 15m long rubberized lined hose including SS male and female instantaneous type coupling approved by fire authority, machine wound with copper wire complete in all respects. Hose shall conform to IS 636 Type-A and coupling to IS 903 -1975 ( ISI marked)

Providing and fixing standard short size SS Short branch pipe with nozzle 16 mm dia. outlet with standard instantaneous type 63 mm dia. coupling. (ISI marked, IS:903)

Providing and fixing fire hose cabinet fabricated from 16 gauge M.S. sheet with double glazed front door and pad locking arrangement, painted Fire Red with stove enameled paint and FIRE HOSE written on front including necessary supports ( to house TWO lengths of canvas hose with couplings, branch pipe and nozzle).

Providing and fixing 150 mm dia Three –Way Fire brigade connection consisting of 63 mm dia instantaneously male coupling and and a check valve protected by cap scored with a chain glass bore etc. complete. ( To be connected to riser ).

Supply & fixing of Hose box glass.

Providing and fixing of self illuminated / auto glow "EXIT" signs printed on photoluminescent sheet containing self illuminated base chemical, of appropriate size not less than 400 x 150 mm, suspended from ceiling or fixed to the walls with accessories as required and as directed at site.

Terrace Pump: Repairing of Monoblock type horizontal pump with volute brozne impeller conntected to TEFC induction motor suitable for 400/410 Volts, 3 Phase, 50 Cycles , AC supply with the following specifications:Capacity 900 LPM Head : 35 m

Repairing of horizontal split casing pumping set with volute bronze impeller connected to a TEFC induction motor suitable for 410/440 volts, 3 phase , 50 cycles AC supply as per the details given below:a. Capacity : 2850 lpm b. Head : 70 meter c. HP : 60 .d. No of stages : single e. RPM : 2900 f. Mover : Electric Motor driven. g. Material of Construction/Specification Shaft & Sleeve: S.S. 410 Impeller : Bronze Casing : CI Bearing : Grease lubricated Seal : Mechanical Seal

Jockey Pump: Repairing of horizontal centrifugal pump with volute brozne impeller conntected to TEFC induction motor suitable for 400/410 Volts, 3 Phase, 50 Cycles , AC supply with the following specifications: a. Capacity : 180 lpm b. Head : 70 m. c. HP : As per Approved performance curve d. RPM : 2900 e. Mover : Electric Motor driven f. Material of Construction: Shaft & Sleeve : S.S. 410 Impeller : Bronze Bearing : Grease lubricated Seal : Mechanical Seal

Repairing of diesel engine driven main fire pump suitable for automatic operation and consisting of diesel driven pump Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12/24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 , outside pump house duly insulated with 50 mm thick glass wool with 1 mm thick aluminum sheet cladding, residential silencer, instruments and protection as per standard specification, shop solenoid for auto stop in the event of fault with audio indications, painted with post office red color etc. as required. M.S. fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required, suitable cement concrete foundation duly plastered and with anti vibration pads. 2850 LPM AT 70 M Head

Providing and fixing dual type pressure switch suitable for 1-20 Kg/cm2 including electrical connections setting of Cut-In and cut-Off pressure complete in all respects.

Repairing of Main Fire Panel and making it functional to support all the pumps to run at full capacity

Providing and fixing heavy duty aluminium armored cables 1.1 KVA grade including necessary support clamps at ceiling Power cable 3.5 core x 50 Sq. mm

Providing and fixing heavy duty aluminium armored cables 1.1 KVA grade including necessary support clamps at ceiling Power cable 3.5 core x 16 Sq. mm

Providing and fixing heavy duty aluminium armored cables 1.1 KVA grade including necessary support clamps at ceiling Power cable 3.5 core x 95 Sq. mm

Providing and fixing M.S. structural work fabricated from standard sections, (MS rounds, angles, channels ,slotted angle, etc.) including cutting to size, drilling ,welding or insert plates including cost of (Hilti) fasteners, clamp in RCC structural members as directed, including two or more coats of synthetic enamel paint over one coat of primer after surface preparation including cutting and making good walls.

GST @ 12%

Labour cess @ 1%