Indian Institute Of Coal Management Tender
Search from across the categories, cities, and authorities to find the latest Jharkhand tenders. Every Jharkhand tender is curated from credible sources of government websites (eProcurement Jharkhand portal) and newspapers, thus ensuring the credibility of the information presented to you. For more information on Jharkhand tender bidder registration, the login process and more read the FAQs section on this page.
Costs
EMD
₹ 3,05,400Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_IICM_243872_1Bid Award Id
ViewTender No
IICM/Civil/NIT/Civil/22-23/357 dt 11.5.22Tender Authority
Indian Institute Of Coal Management ViewPurchaser Address
-Website
http://http://www.iicm.ac.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Daily operation of sewerage treatment plant inclusive of pumping system, aerator and cleaning algae scum from all tanks, back wash if required & provision of chemicals & reagents etc., including total over hauling/dewatering as and when required as per the instruction of the EIC. (excluding materials cost).
24
-
31530.41
Repair and maintenance of all civil structures like repair in plaster, flooring/refilling, repair of roads, repair of rubble wall etc along with the maintenance of all doors, windows, ventillators, rolling shutters made of wood/steel etc. including periodic easing of doors, windows etc. and replacement of door stoppers, handles, aldrops, tower bolts etc. if needed. (excluding materals cost)
24
-
110132.82
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level (Excluding Labour Cost). 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
5
-
4295.53
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete — Mild steel and medium tensile steel bars, excluding labour cost.
100
-
56.78
Brickwork with bricks of locally available 1st class in foundation and plinth in (Excluding Labour Cost) :- (a) Cement morter 1:4 (1 cement : 4 sand).
3
-
3484.78
Brickwork with bricks of locally available 1st class in foundation and plinth in (Excluding Labour Cost) :- (b) Cement morter 1:6 (1 cement : 6 sand).
5
-
3315.93
Brickwork with bricks of locally available 1st class in superstructure above plinth level upto floor V level, excluding Labour Cost. (a) Cement Morter 1:4 (1 cement : 4 coarse sand).
1
-
4003.25
Brickwork with bricks of locally available 1st class in superstructure above plinth level upto floor V level, excluding Labour Cost. (b) Cement morter 1:6 (1 cement : 6 coarse sand).
1
-
3811.4
Half brick masonry with bricks of 1st class locally available in foundation and plinth in cement mortar 1:4 (1 cement : 4 sand) excluding Labour Cost.
1
-
451.51
Half brick masonry in super structure above plinth level upto floor V level in cement mortar (1:4) excluding Labour Cost.
1
-
451.51
Random rubble masonry with hard stone/khunti stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement:6 sand:12 graded stone aggregate 20 mm nominal size) at plinth level with as cement mortar 1:6 (1 cement:6 sand) excluding Labour Cost.
5
-
3284.17
Random rubble massonery with hard stone/khunti stone in super structure above plinth level and level upto floor five level, including levelling up with cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like in cement mortar 1:6 (1 cement : 6 sand). excluding Labour Cost.
1
-
3281.14
Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately).excluding Labour Cost. (a) 12 mm thick
15
-
368.32
Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately).excluding Labour Cost. (b) 18 mm thick
20
-
606.9
Providing and fixing ISI marks flush door shutters conforming to IS : 2202 (Part I) non decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding Labour Cost. (a) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
25
-
1224.04
Providing and fixing ISI marks flush door shutters conforming to IS : 2202 (Part I) non decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding Labour Cost. (b) 25 mm thick (for cup board) including ISI marks nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws nickel plated bright finished piano hinges with necessary screws.
10
-
1789.5
Providing and fixing 4 mm thick coir veneer board, ISI marked IS : 14842-2000, plain lining with necessary screws, priming coat on unexposed surface etc. complete.excluding Labour Cost.
1
-
652.51
Providing and fixing fly proof galvanised M.S. wire gauze to windows and clerestory windows using galvanised M.S. wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm - With 2nd class teak wood beading 62x19 mm.excluding Labour Cost.
2
-
716.81
Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. Complete, excluding Labour Cost. (a) 100x58x1.90 mm
5
-
15.66
Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. Complete, excluding Labour Cost (b) 75x47x1.70 mm
10
-
10.16
Providing and fixing bright finished brass butt hinges with necessary screws etc. Complete, excluding Labour Cost. (a) 100x70x4 mm
5
-
89.91
Providing and fixing bright finished brass butt hinges with necessary screws etc. Complete, excluding Labour Cost. (b) 75x40x2.5 mm
5
-
55.08
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete — 100x10 mm.excluding Labour Cost.
1
-
131.33
Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers including necessary screws etc. complete (best make of approved quality).excluding Labour Cost. (a) Size 40 mm
10
-
73.07
Providing and fixing special quality bright finished brass cupboard or ward robe locks with six levers including necessary screws etc. complete (best make of approved quality).excluding Labour Cost. (b) Size 50 mm
10
-
108.24
Providing and fixing 50 mm bright finished brass cup board or wardrobe knob with necessary screws (best make of approved quality).excluding Labour Cost.
10
-
42.87
Providing and fixing bright finished brass hanging type floor door stoper with necessary screws, etc. complete.excluding Labour Cost.
1
-
90.97
Providing and fixing IS : 3564 marked Aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. Complete, excluding Labour Cost.
25
-
800.21
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1968) transparent or dyed to required colour or shade with nuts and scres etc. complete — 250x16 mm. excluding Labour Cost
1
-
159.89
Providing and fixing of alluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 per IS : 1868) transparent of dyed to required colour or shade with necessary screws etc. Complete, excluding Labour Cost.(a) 200x10 mm
1
-
68.09
Providing and fixing of alluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 per IS : 1868) transparent of dyed to required colour or shade with necessary screws etc. Complete, excluding Labour Cost (b) 150x10 mm
1
-
58.83
Providing and fixing of alluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 per IS : 1868) transparent of dyed to required colour or shade with necessary screws etc. Complete, excluding Labour Cost (c) 100x10 mm
1
-
44.05
Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete — 125 mm, excluding Labour Cost.
1
-
47.01
Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Single rubber stopper, excluding Labour Cost
100
-
27.16
Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete. excluding Labour Cost
1
-
509.26
Providing and fixing magnetic catcher in cupboard / ward robe shutters including fixing with necessary screws etc. complete (Best make of approved quality) Double strip (horizontal type). excluding Labour Cost.
10
-
27.21
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate, excluding Labour Cost.
6
-
200.92
12mm thick cement plaster (in fine sand) of mix 1:6 (1cement:6 sand), excluding Labour Cost.
50
-
51.52
12 mm thick cement plaster finished with a floating coat of neat cement of mix 1:4 (1cement: 4 sand), excluding Labour Cost.
15
-
76.27
6mm thick cement plaster to ceiling of mix 1:3 (1cement: 3 sand), excluding Labour Cost.
10
-
41.22
Neat cement punning/cement slurry, excluding Labour Cost.
10
-
14.88
Pointing on stone with cement morter 1:3 (1cement:3 sand) in Ruled / flush pointing, excluding Labour Cost.
100
-
16.75
White washing with lime to give an even shade in old work (Two or more coats to make an even shade), excluding Labour Cost.
25
-
2.81
Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats) (Excluding Labour Cost)
1000
-
10.2
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (Excluding Labour Cost)
500
-
1.89
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer (Excluding Labour Cost)
500
-
7.68
Wall painting with plastic emulsion paint of approved brand and manufacture to give and even shade - One or more coats excluding labour cost, excluding labour cost
1000
-
21.98
Finishing walls with water proofing cement paint of approved shade — OLD WORK One or more coats applied @ 2.20 kg / 10 sqm over priming coat of primer of Snowcem or equivalent applied @ 0.80 litrs / 10 sqm complete including cost of priming coat, excluding labour cost
600
-
21.16
Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work, excluding labour cost.
50
-
13.76
Applying priming coat with red oxide zinc chromate primer of approved brand and manufacture on steel work, excluding labour cost.
50
-
9.62
Painting (one or more coats) on rain water, soil waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work : excluding labour cost. (a) 100 mm diameter pipes.
200
-
6.4
Painting (one or more coats) on rain water, soil waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work : excluding labour cost. (b) 75 mm diameter pipes.
100
-
4.98
Painting with synthetic enamel paint of approved brand and manufacture of
required colour to give an even shade : 1 or more coats on old work (Excluding Labour Cost)
500
-
17.87
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 2 or more coats on new work (Excluding Labour Cost)
500
-
28.2
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: excluding labour cost. Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm).
25
-
447.07
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty, excluding labour cost. Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm)
5
-
705.15
Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete, excluding Labour Cost (a) 32 mm dia.
30
-
76.91
Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete, excluding Labour Cost (b) 40 mm dia.
10
-
86.3
Providing and fixing 600x120x5 mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc. Complete, excluding Labour Cost
20
-
375.32
Providing and fixing 600x450 beveled edge mirror of superior glass complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete, excluding Labour Cost
20
-
646.13
Providing and fixing toilet paper holder, excluding Labour Cost (b) CP brass.
10
-
337.67
Providing and fixing toilet paper holder, excluding Labour Cost (a) Vitreous China.
10
-
199.48
Providing & fixing of kitchen sink including making all connections, excluding the cost of fittings — white glazed fire clay kitchen sink of size 600x450x250 mm, excluding labour cost.
3
-
1625.29
Providing & fixing G.I.Pipes complete with G.I.fittings & clamps including cutting and making good the walls etc. Internal work, excluding labour cost. (a) 20 mm dia. Nominal bore.
5
-
164.62
Providing & fixing G.I.Pipes complete with G.I.fittings & clamps including cutting and making good the walls etc. Internal work, excluding labour cost (b) 25 mm dia. Nominal bore.
5
-
234.21
Providing & fixing G.I.Pipes complete with G.I.fittings & clamps including cutting and making good the walls etc. (a) 15 mm dia. Nominal bore. (Excluding Labour Cost)
30
-
110.27
Providing & fixing G.I.Pipes complete with G.I.fittings & clamps including cutting and making good the walls etc. (b) 20mm dia. Nominal bore. (Excluding Labour Cost)
10
-
145.02
Providing & fixing G.I.Pipes complete with G.I.fittings & clamps including cutting and making good the walls etc. (c) 25mm dia. Nominal bore. (Excluding Labour Cost)
15
-
206.46
Providing & fixing G.I.Pipes complete with G.I.fittings & clamps including cutting and making good the walls etc. (d) 50mm dia. Nominal bore. (Excluding Labour Cost)
15
-
373.75
Providing & fixing G.I.Pipes complete with G.I.fittings & clamps including cutting and making good the walls etc. (e) 80mm dia. Nominal bore. (Excluding Labour Cost)
15
-
608.4
Provind and fixing brass stop cock of approved quality 15 mm nominal bore, excluding labour cost.
20
-
265.28
Providing & fixing brass bib cock of approved quality - 15 mm nominal bore, excluding labour cost.
10
-
265.28
Providing and fixing gun metal gate valve with C.I. wheel of approved quality, excluding labour cost. (a) 40mm Nominal bore.
5
-
594.83
Providing and fixing gun metal gate valve with C.I. wheel of approved quality, excluding labour cost. (b) 50mm Nominal bore.
5
-
762.12
Providing and fixing gun metal gate valve with C.I. wheel of approved quality, excluding labour cost. (c) 80mm Nominal bore.
5
-
1944.7
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete, Excluding labour Cost. (a) 15 mm nominal bore.
20
-
296.97
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete, Excluding labour Cost. (b) 20 mm nominal bore.
10
-
275.69
Providing & fixing gun metal non-return valve of approved quality, Excluding labour Cost. (a) 50mm Nominal bore.
5
-
961.95
Providing & fixing gun metal non-return valve of approved quality, Excluding labour Cost. (b) 80mm Nominal bore.
1
-
2487.02
Providing & fixing uplasticised PVC connection pipe with brass unions, Excluding labour Cost. (a) 30 cm length 15mm Nominal bore.
20
-
35.2
Providing & fixing uplasticised PVC connection pipe with brass unions, Excluding labour Cost. (b) 45 cm length 15mm Nominal bore.
20
-
41.06
Providing & fixing C.P. brass shower rose with 15 or 20mm inlet, 100 mm dia, Excluding labour Cost
25
-
117.31
Providing and fixing G.I. Union in existing G.I. Pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required, Excluding Labour cost. (a) 15mm Nominal bore
5
-
39.47
Providing and fixing G.I. Union in existing G.I. Pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required, Excluding Labour cost. (b) 20 mm nominal bore.
5
-
61.77
Providing and fixing G.I. Union in existing G.I. Pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required, Excluding Labour cost. (c) 25mm dia. Nominal bore.
5
-
130.97
Providing and fixing G.I. Union in existing G.I. Pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required, Excluding Labour cost. (d) 50mm dia. Nominal bore.
5
-
296.38
Providing and fixing G.I. Union in existing G.I. Pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required, Excluding Labour cost. (e) 80mm Nominal bore
5
-
664.75
Providing and fixing of C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore, excluding labour cost
50
-
340.21
Providing and fixing CP brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore, excluding labour cost
10
-
504.45
Providing and fixing CP brass stop cock of standard design and approved make confirming to IS:8931, 15 mm nominal bore, excluding labour cost
2
-
504.45
Providing and fixing CP brass angle valve for basin mixer and geyser points of approved quality confirming to IS:8931, 15 mm nominal bore, excluding labour cost
10
-
439.92
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness (Excluding Labour Cost)
20
-
1863.08
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. (Excluding Labour Cost)
25
-
254.89
Providing and fixing solid plastic seat with lid for pedestal type W.C. pan Parryware / Hindware / Seabird / Orient (Coral) complete. White solid plastic sheat with lid excluding Labour Cost.
25
-
469.25
Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 20 mm dia (Excluding Labour Cost)
10
-
322.13
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete :Twin rubber stopper (Excluding Labour Cost)
10
-
51.78
Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks: 1:4 (1 cement : 4 coarse sand) (Excluding Labour Cost)
10
-
532.59
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal outer dia Pipes (Excluding Labour Cost)
25
-
173.89
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 50 mm nominal outer dia Pipes (Excluding Labour Cost)
20
-
573.54
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, havingthermal stability for hot & cold water supply including all CPVC plain & brassthreaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. 20 mm nominal outer dia Pipes
30
-
118.64
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, havingthermal stability for hot & cold water supply including all CPVC plain & brassthreaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. 25 mm nominal outer dia Pipes (Excluding Labour Cost)
30
-
173.25
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, havingthermal stability for hot & cold water supply including all CPVC plain & brassthreaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. 50 mm nominal outer dia Pipes (Excluding Labour Cost)
30
-
572.29
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, havingthermal stability for hot & cold water supply including all CPVC plain & brassthreaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. 75 mm nominal outer dia Pipes (Excluding Labour Cost)
30
-
1572.42
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, havingthermal stability for hot & cold water supply including all CPVC plain & brassthreaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. 100 mm nominal outer dia Pipes (Excluding Labour Cost)
30
-
2236.89
Disposal of moorum/building rubbish/ malba/similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note - item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more.
30
-
287.45
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at op, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Enegineer-in-Charge. (Glazing and panelling to be paid for separately). For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of PVC/neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickess of powder coating 50 micron).
10
-
400.09
Providing and fixing sheet covering over expansion joints with iron screws as per design to match the colour/ shade of wall treatment. Non asbestos fibre cement board 6 mm thick as per IS:14862 — 200 mm wide.
10
-
224.68
Providing and fixing sheet covering over expansion joints with iron screws as per design. Aluminium fluted strips 3.15 mm thick. 200 mm wide
30
-
574.27
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). (a) Sal wood.
0.5
-
92352.61
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). (b) second class teak wood.
0.5
-
114146.62
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.Kiln seasoned and chemically treated Hollock wood. 30 mm thick shutters
3
-
1936.58
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class teak wood 30 mm thick shutters
10
-
2867.06
Providing and fixing of 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including a priming coat of approved steel primer. (using flats 30x6 mm for diagonal braces and central cross piece.
3
-
3751.1
Providing and fixing of long wire springs for rolling shutters.
20
-
415.09
Providing and fixing of ball bearings for rolling shutters.
20
-
368.12
Welding by gas or electric plant including transportation of welding plant at site etc. complete.
600
-
2.94
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recomme-nded jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with: 12.5 mm thick tapered edge gypsum moisture resistant board
150
-
1127.76
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
4020
-
16.01
Distempering with 1st quality acrylic distemper (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats)
6000
-
47.61
Wall painting with plastic emulsion paint of approved brand and manufacture to give and even shade - One or more coats.
10000
-
74.22
Painting with aluminium paints of approved brand and manufacture to give an even shade two or more coats to make an even shade.
100
-
98.42
Painting with enamel paints of approved brand and manufacture to give and even shade. 1 or more coats to make an even shade.
5000
-
62.31
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
300
-
106.58
Lettering with black Japan paint of approved brand and manufacture per letter per cm height
300
-
4.12
French spirit polishing two or more coats on new work including a coat of wood filler.
500
-
307.89
Finishing walls with acrylic smooth exterior paint of required shade - old work (one or more coats applied @ 1.67 ltr. Per 10 sqm.
18000
-
87.59
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
2000
-
100.97
Painting road surface marking with adequate nos of coats to give uniform finish with ready mixed road marking paint conforming to IS : 164, on bituminous surface in white/yellow shade, including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete. New work (Two or more coats)
50
-
189.34
Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with stong vibratory compaction and of approved size and design/shape laid in required colour and pattern ovr and including 50mm thick compacted bed of coarse sand, filling the joints with coarse sand etc. all complete as per the direction of Engineer-in-Charge.
150
-
753.49
Providing and fixing Galvanized steel barbed wire as per the direction of Engineer-in-Charge.
2
-
6515.33
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineerin-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)
150
-
254.97
Providing and fixing white vitreous china pedestal type water closet. W.C. pan with ISI marked white solid plastic seat and lid (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required.
5
-
5861.52
Providing and fixing white vitreous china water closet squatting pan (Indian type) : Long pattern W.C. pan of size 580 mm
5
-
1351.22
Providing and fixing PVC low level flushing cistern with manually controlled device (handle lever) conforming to IS:7231 with all fittings and fixtures complete. 10 litre capacity - White
5
-
876.77
Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. 10 litre (full flush) capacity - white.
5
-
1613.08
Providing & fixing white vitreous china wash basin including making all connections but excluding the cost of fittings. Flat back wash basin of size 630x450 mm.
10
-
999.04
Providing & fixing white vitreous china wash basin including making all connections but excluding the cost of fittings. Flat back wash basin of size 550x400 mm.
10
-
787.9
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm size respectively.
2
-
1139.64
Providing and fixing soil, waste and vent pipes :- 100 mm dia Sand cast iron S&S pipe as per IS:1729.
10
-
884
Providing & laying S&S C.I. standard specials such as tees, bends, collars, tapers, caps etc. (heavy class), upto 300 mm dia.
1
-
4664.99
Providing lead caulked joints to spun or C.I. pipes and specials including testing of joints but excluding the cost of pig lead for 100 mm diameter.
8
-
328.63
Supplying pig lead at site of work.
0.5
-
20657.83
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) 100 mm dia Class I
4
-
3487.58
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) 150 mm dia Class I
4
-
5117.62
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
10000
-
7.72
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete — Mild steel and medium tensile steel bars.
500
-
71.99
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand). a) 25 mm thick
150
-
1343.15
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
10
-
1587.08
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil
40
-
159.45
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
5
-
221.22
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : a) 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)
10
-
5488.08
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : a) 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)
5
-
6767.49
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. a) 40 mm thick with 20 mm nominal size stone aggregate
50
-
436.96
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
10
-
5952.35
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. a) With cement mortar 1:4 (1 cement : 4 fine sand)
100
-
366.34
12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
200
-
222.93
6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand).
100
-
199.34
Neat Cement Punning
100
-
55.02
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. a) a) Size of Tile 600x600 mm
100
-
1355.42
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete.
50
-
873.92
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
100
-
813.6
Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
100
-
1109
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : a) Cement mortar 1:3 (1 cement : 3 coarse sand)
20
-
678.44
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: a) Cement mortar 1:6 (1 cement : 4 coarse sand)
5
-
5398.96
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. a) In cement mortar
5
-
1288.83
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer in charge - Nominal concrete 1:4:8 or leaner mix ( including equivalent design mix ).
3
-
940.65
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
3
-
2222.47
Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: a) a) Above 150 mm dia up to 300 mm dia
20
-
346.45
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :100 mm dia pipe.
20
-
48.79
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
50
-
34.2
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below.
15
-
240.68
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead:Of area 3 sq. metres and below.
10
-
93.41
25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm X 25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm). PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mm X 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer’s specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places
15
-
2264.21
Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge.
15
-
343.41
Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead of:G.S. Sheet
10
-
106.88
Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead of:Asbestos Sheet.
5
-
49.88
Dismantling G. I. pipes (external work) including excavation and refilling trenches after taking out the pipes, including stacking of pipes within 50 metres lead :15 mm to 40 mm nominal bore.
30
-
94.83
Dismantling G. I. pipes (external work) including excavation and refilling trenches after taking out the pipes, including stacking of pipes within 50 metres lead :Above 40 mm nominal bore
30
-
103.24
Dismantling of flushing cistern of all types (C.I. /PVC/Vitrous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
10
-
585.85
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
30
-
121.75
Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : In cement mortar
100
-
1538.2
Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured): From brick work in cement mortar
3
-
4279.65
Removing mortar from and cleaning stones and concrete articles (net quantity of stacks of cleaned materials will be measured): In cement mortar
25
-
434.72
Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge.
200
-
2.41
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm
50
-
48.1
Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
30
-
166.86
Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead.
100
-
23.02
Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : bituminous road
30
-
268.87
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding
200
-
144.94
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc.
50
-
161.76
Random rubble masonry with hard stone/khunti stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement:6 sand:12 graded stone aggregate 20 mm nominal size) at plinth level with as cement mortar 1:6 (1 cement:6 sand) (Excl. stone)
50
-
3910.25
Random rubble masonry with hard stone/khunti stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement:6 sand:12 graded stone aggregate 20 mm nominal size) at plinth level with as cement mortar 1:6 (1 cement:6 sand)
30
-
5366.82
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
15
-
1712.47
Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases of columns, etc. for mass concrete
10
-
249.75
Centering and shuttering including strutting, propping etc. and removal of form for all heights Lintels, beams, plinth beams, girders, bressumers and cantilevers
10
-
505.07
Centering and shuttering including strutting, propping etc. and removal of form for all heights Suspended floors, roofs, landings, balconies and access platform
10
-
607.95
Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
10
-
534.24
Centering and shuttering including strutting, propping etc. and removal of form for : Shelves (Cast in situ).
10
-
607.95
Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts.
10
-
643.32
Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 6mm nominal size), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing with cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits - 40 mm thick
5
-
1165.94
Providing and filling in position bitumen mix filler of Proportion 80 kg. of hot bitumen , 1 kg. of cement and 0.25 cubic metre of coarse sand for depth per expansion joints.
0.5
-
18460.93
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels - Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble - Area of slab upto 0.50 sqm
50
-
2435.27
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels - Granite of any colour and shade - Area of slab over 0.50 sqm.
50
-
2238.21
Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.
150
-
322.66
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality - 1.0 mm thick
50
-
629.24
Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified - 2 mm thick flat
50
-
876.25
Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately).
5
-
284.44
Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately).
5
-
63.31
Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-Charge.
100
-
69.13
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in -Charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
200
-
504.57
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
3
-
7344.35
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil. For Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
30
-
319.35
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
10
-
192.59
Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m : All kinds of soil.
50
-
21.35
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness
50
-
876.47
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
50
-
93.34
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
20
-
2651.45
Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete - 250 mm weighing not less than 150 gms
5
-
45.07
Providing and fixing oxidised M.S. Safety chain with necessary fixtures for doors, (weighting not less than 450 gms).
5
-
77.6
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
100
-
89.21
Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks: 1:4 (1 cement : 4 coarse sand)
5
-
760.6
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
50
-
550.25
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal outer dia Pipes
100
-
269.14
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal outer dia Pipes
50
-
323.73
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 50 mm nominal outer dia Pipes
50
-
792.2
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, havingthermal stability for hot & cold water supply including all CPVC plain & brassthreaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. 20 mm nominal outer dia Pipes
50
-
222.45
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, havingthermal stability for hot & cold water supply including all CPVC plain & brassthreaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. 25 mm nominal outer dia Pipes
50
-
286.42
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, havingthermal stability for hot & cold water supply including all CPVC plain & brassthreaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. 50 mm nominal outer dia Pipes
50
-
694.13
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, havingthermal stability for hot & cold water supply including all CPVC plain & brassthreaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. 75 mm nominal outer dia Pipes
50
-
1723.66
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, havingthermal stability for hot & cold water supply including all CPVC plain & brassthreaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. 100 mm nominal outer dia Pipes
30
-
2437.15
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion - Single socketed pipes. - 110 mm diameter.
100
-
267.47
Providing and fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion - Single tee with door - 75x75x75 mm.
10
-
107.37
Providing and fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion - Single tee with door - Bend 87.5° - 110 mm bend.
10
-
113.85
Providing and fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion - Single tee with door - Shoe (Plain) - 110 mm shoe.
10
-
99.79
Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised- PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete - 110 mm.
100
-
253.23
Providing and fixing draining board with C.I. brackets including painting of brackets, cutting and making good the walls wherever required :White glazed fire clay draining board of size 600x450x25mm.
10
-
1173.01
Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge.
1200
-
364.45
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.
100
-
49.58
Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and
partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm
150
-
225.25
Cleaning of all roof tanks (hostels, faculty house & residential quarters) as per instruction of the E/INC as and when required, excluding labour cost.
100
-
22.48
Cleaning of inspection chamber, excluding labour cost.
400
-
16.61
Providing and Fixing Ball cock 15 mm complete with Epoxy coated aluminium rod and H.D. ball of reputed brand as per instruction of EIC. (excluding labour cost)
150
-
383.1
Providing and fixing C.P. Connection pipe to Gyser with nut bolt and washer complete of reputed brand Jaquar as per instruction of EIC. (excluding labour cost)
50
-
307.85
Providing and fixing PVC low level cistern handle with all complete set including PVC Ball Cock of reputed brand as per instruction of EIC. (excluding labour cost)
50
-
523.84
Providing and fixing of G.I. Elbow of reputed brand as per instruction of EIC. (a) 100 mm dia. (excluding labour cost)
2
-
647.96
Providing and fixing of G.I. Elbow of reputed brand as per instruction of EIC. (b) 80 mm dia. (excluding labour cost)
2
-
477.91
Providing and fixing of G.I. Plug of reputed brand as per instruction of EIC. (a) 100 mm dia. (excluding labour cost)
2
-
273.64
Providing and fixing of G.I. Plug of reputed brand as per instruction of EIC. (b) 80 mm dia. (excluding labour cost)
2
-
205.23
Providing and fixing of glass panes including supplying putty and nails etc. to the steel/aluminium/wooden frames as per instruction of EIC - 12 mm thick. (excluding labour cost)
25
-
1580.32
Providing and fixing 5mm thick bevelled edge & mirror of superior glass (of approved quality) complete fixed to wooden cleats with C.P. brass screws and washers complete as per instruction of EIC. (excluding labour cost)
25
-
1194.28
Providing and fixing of Godrej tabuler locks with round knobs for door of reputed brand as per instruction of EIC. (excluding labour cost)
30
-
988.06
Supply of plastic plate for earthen flower gamlas. (excluding labour cost)
200
-
99.69
Providing and fixing in position PVC acrylic sheet milk white colour 3/4 mm thick of approved quality as per instruction of EIC. (excluding labour cost)
20
-
69.39
Providing and fixing of 6 mm Ply Board as per the instruction of E/INC of approved quality as per instruction of EIC. (excluding labour cost)
70
-
83.08
Painting with Fluroscent paint of approved brand as per instruction of EIC. (excluding labour cost)
300
-
52.78
Monthly supply of Bleaching powder for maintenance and cleaning activities at IICM of approved quality as per instruction of EIC. (excluding labour cost)
75
-
718.33
Monthly supply of Chlorine (Liquid) for maintenance and cleaning activities IICM of approved quality as per instruction of EIC. (excluding labour cost)
300
-
95.77
Supply of monthly consumables like Floor disinfectant cleaner of Lizol or equivalent of approved brand as per instruction of EIC (excluding labour cost)
360
-
143.22
Supply of monthly consumables like Odonil or equivalent of approved brand as per instruction of EIC (excluding labour cost)
750
-
26.48
Supply of monthly consumables like Harpic or equivalent of approved brand as per instruction of EIC (excluding labour cost)
360
-
131.36
Supply of monthly consumables like chaka chaka or equivalent of approved brand as per instruction of EIC (excluding labour cost)
240
-
46.61
Supply of monthly consumables like Jharu, phool, nariyal, duster etc. of approved brand as per instruction of EIC (excluding labour cost)
48
-
38.14
Providing and fixing single lever basin mixer without popup waste with 450 mm long braided hoses of approved quality of jaquar/equivalent/Equivalent as per the instruction of EIC. (excluding labour cost)
15
-
3558.64
Providing and fixing under counter basin with fixing accessories set of required size (555x425x195 MM) and oval shape of approved quality of jaquar/equivalent as per the instruction of EIC. (excluding labour cost)
3
-
3257.62
Providing and fixing Bottle trap (internal partition) 32 mm size with 300 mm & 190 mm long wall connection pipes and wall flange of approved quality of jaquar/equivalent as per the instruction of EIC. (excluding labour cost)
20
-
1517.65
Providing and fixing waste coupling 32mm full thread of approved quality of jaquar/equivalent as per the instruction of EIC. (excluding labour cost)
10
-
460.53
Providing and fixing Towel ring round with round flange with concealed fittings of approved quality of jaquar/equivalent as per the instruction of EIC. (excluding labour cost)
10
-
863.49
Providing and fixing single towel rail 600 mm long, stainless steel with concealed fittings arrangement of approved quality of jaquar/equivalent as per the instruction of EIC. (excluding labour cost)
15
-
1229.83
Providing and fixing tumbler holder with concealed fittings arrangement of approved quality of jaquar/equivalent as per the instruction of EIC. (excluding labour cost)
10
-
575.65
Providing and fixing soap dispenser with glass bottle with concealed fittings arrangement of approved quality of jaquar/equivalent. as per the instruction of EIC. (excluding labour cost)
20
-
1255.99
Providing and fixing double hook with concealed fittings arrangement of approved quality of jaquar/equivalent as per the instruction of EIC. (excluding labour cost)
10
-
497.18
Providing and fixing angular stop cock with wall flange with concealed fittings arrangement of approved quality of jaquar/equivalent. as per the instruction of EIC. (excluding labour cost)
30
-
968.17
Providing and fixing bib cock of approved quality of jaquar/equivalent as per the instruction of EIC. (excluding labour cost)
30
-
1412.99
Providing and fixing spindle of approved quality of jaquar/equivalent as per the instruction of EIC. (excluding labour cost)
50
-
465.76
Providing and fixing Single lever wall mixer with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs & wall flanges of approved quality of jaquar/equivalent as per the instruction of Engineer in charge. (excluding labour cost)
15
-
6436.95
Providing and fixing overhead shower 120 mm dia round shape single flow(ABS Body Chrome Plated with gray pace plate) of approved quality of jaquar/equivalent as per the instruction of Engineer in charge. (excluding labour cost)
10
-
2773.63
Providing and fixing sink cock with regular swinging spout (wall mounted model) with wall flange of approved quality of jaquar/equivalent as per the instruction of EIC. (excluding labour cost)
10
-
1622.33
Provind and fixing bowl for extended wall hung water closet (WC) with PP soft close seat cover, Cistern, hinges, accessories set of size 375x620x770 mm all complete of approved quality of jaquar/equivalent as per the instruction of EIC. (excluding labour cost)
5
-
8910.72
Provind and fixing cistern all complete of approved quality of jaquar/equivalent as per the instruction of EIC. (excluding labour cost)
5
-
3131.88
Providing and fixing two way bib cock with wall flange of approved quality of jaquar/equivalent as per the instruction of EIC. (excluding labour cost)
15
-
1831.65
Providing and fixing UF soft losing seat cover for pedastal type W.C. pan complete of approved quality of jaquar/equivalent as per the instruction of EIC. (excluding labour cost)
10
-
4071.5
Providing and fixing hand shower (Health faucet) with 8 mm dia, 1.2 meter long flexible tube and wall hook of approved quality of jaquar/equivalent as per the instruction of EIC. (excluding labour cost)
50
-
1412.99
Providing and fixing toilet roll holder with concealed fittings arrangement of approved quality of jaquar/equivalent as per the instruction of EIC. (excluding labour cost)
30
-
1099
Providing and fixing grab bar 300 mm with concealed fittings arrangement of approved quality of jaquar/equivalent as per the instruction of EIC. (excluding labour cost)
5
-
1308.31
Provind and fixing inlet valve (Siphon) for cistern of approved quality of jaquar/equivalent as per the instruction of EIC. (excluding labour cost)
30
-
837.32
Provind and fixing flush valve (ball cock) for cistern of approved quality of jaquar/equivalent as per the instruction of EIC. (excluding labour cost)
30
-
941.99
Painting (two or more coats) with synthetic enamel paint of approved brand and manufacture of required colour on electrical poles upto a height of 10 m including preparation of surface etc. complete. a) upto 100 mm dia pipe
100
-
125.09
Painting (two or more coats) with synthetic enamel paint of approved brand and manufacture of required colour on electrical poles upto a height of 10 m including preparation of surface etc. complete. b) above 100 mm dia pipe
10
-
113.37
Repairing of existing Brass Spindle for Sluice Valve of size 150 mm to 100 mm dia as when required as per instruction of EIC.
5
-
3405.92
Maintenance of rolling shutter like greasing, oiling etc. complete as per instruction of EIC.
25
-
2043.56
Providing and applying solvent base silicon coating one brass coat over prepared surface, rate is inclusive of preparation of surface i.e. cleaning the surface mechanically and washing with water jet, ceiling craks, joints etc. with elastomeric silicon compound sealing bigger cracks, repairing scalled concrete etc. with polymer mortar including curing, all labour, scaffolding etc. complete in all respect (roof and parapet wall)
100
-
397.77
Providing and laying Heritage Granules / Flakes with all complete job as per the direction and instruction of Engineer in charge
200
-
90.89
Cleaning of septic tanks of size 12' x 60' x 8' depth as per instruction of EIC.
5
-
4540.59
Writing and Fixing of Road Side Metal Sign Board including repairing.
53
-
703.66
Retrieving submersible pump and motor along with PVC/UPVC pipes (Dia upto 50 mm ) from the borewell and reinstalation of the same submersible pupm and motor along with same PVC/UPVC pipes but replacing the damaged pipes which shall be provided by department including necessary connections and commissioning of the pump- a) Upto depth 120 m.
5
-
7375.5
Retrieving submersible pump and motor along with GI pipes (Dia upto 50mm) from the borewell, and re-installation of the same submersible pump and motor along with the same GI pipes but replacing the damaged pipes which shall be provided by the department including necessary connections and commissioning of the pump a) Upto depth 120 m
5
-
10536.42
Retrieving submersible pump and motor along with GI pipes (Dia upto 50mm) from the borewell, and re-installation of the same submersible pump and motor along with the same GI pipes but replacing the damaged pipes which shall be provided by the department including necessary connections and commissioning of the pump b) Above depth 120m and till 150m
6
-
13697.35
Providing and fixing 12 mm thick BWR grade I ply for making wall cabinate / cup board / table etc. including cost of material, labour etc. all complete as per instruction of Engineer-in-Charge.
40
-
1212.43
Providing and fixing 19 mm thick BWR grade-I Block board for making wall cabinate / cup board / table etc. including cost of material, labour etc. all complete as per instruction of Engineer-in-Charge.
50
-
1530.47
Supplying 50 mm dia UPVC heavy duty pipe for bore well at IICM, Kanke, Ranchi.
300
-
275.32
Automated/Mechanised Tank Cleaning consisting of 6 stage process as under:
Stage I - Cleaning & Removal of Dirt, Mud & Algae surrounding manhole.
Stage II – Disposing off the dirty water & sludge from tanks by using sludge pump.
Stage III – Cleaning of walls, ceiling & floor using special high pressure jet
Stage IV – Removing sludge using vaccum pump after cleaning the tank floor with high pressure jet.Stage V – Sterilisation of walls, ceiling & floor from bacteria attack using antibacterial agents.
Stage VI – Using UV Radiator to kill suspended or floating bacteria remaining in the tank. Overhead Tank (1 no. Capacity 3,40,000 Litres)
680000
-
0.06
Automated/Mechanised Tank Cleaning consisting of 6 stage process as under:
Stage I - Cleaning & Removal of Dirt, Mud & Algae surrounding manhole.
Stage II – Disposing off the dirty water & sludge from tanks by using sludge pump.
Stage III – Cleaning of walls, ceiling & floor using special high pressure jet
Stage IV – Removing sludge using vaccum pump after cleaning the tank floor with high pressure jet.
Stage V – Sterilisation of walls, ceiling & floor from bacteria attack using antibacterial agents.
Stage VI – Using UV Radiator to kill suspended or floating bacteria remaining in the tank. Underground Tank (F.Type - Capacity 2,50,000 Litres & Assembly hall - 1,20,000 Litres)
740000
-
0.06
Automated/Mechanised Tank Cleaning consisting of 6 stage process as under:
Stage I - Cleaning & Removal of Dirt, Mud & Algae surrounding manhole.
Stage II – Disposing off the dirty water & sludge from tanks by using sludge pump.
Stage III – Cleaning of walls, ceiling & floor using special high pressure jet
Stage IV – Removing sludge using vaccum pump after cleaning the tank floor with high pressure jet.
Stage V – Sterilisation of walls, ceiling & floor from bacteria attack using antibacterial agents.
Stage VI – Using UV Radiator to kill suspended or floating bacteria remaining in the tank. Individual Roof Top Tanks (115 No. - Each of capacity 1000 litres)
230000
-
0.27
Supplying and placing in position of treated sand 0.7 mm nominal size – per 25 kg for filtration purposes as approved by EIC
40
-
1194.53
Supply and placing in position of Pea Gravel 3.00 mm nominal size – per 25 kg. for filtration purposes as approved by EIC
20
-
1194.53
Monthly supply of non-ferric alum for cleaning and maintenance activities at IICM of approved quality as per instruction of EIC.
200
-
40.24
Supply of TCCA 90 for initial cleaning of of swimming pool
100
-
427.52
Monthly supply of Acid for cleaning and maintenance activities at IICM of approved quality as per instruction of EIC.
300
-
44.01
Overhauling of existing centralized water treatment plant consisting of Iron cum turbidity filter vessel & Activated Carbon Filter vessel including replacement of Treated sand-800 kg, Under bed media- 800 kg, Activated carbon- 350 kg & MnO2 - 150 kg, Chemical dosing pump - 1 No, Multiport valve - 2 Nos., Pipeline & fittings, Filter distribution systems alongwith servicing of existing 1no. pump, 1 no. compressor & 2 nos. pressure guages including cleaning the filter vessels with cleaning chemical like NaOCl etc. all works complete to make it properly functional including Warranty of 1 year on materials and servicing as and when required in the warranty period. The discharge standards of filtered water shall be as per BIS 10500. All works shall be done to the satisfaction of EIC.
1
-
155288
Daily maintenaance and cleaning of swimming pool and its proper dosing, filtration of water through the pressure filters, suction trolley pump, back wash etc. including draining out of swimming pool water as and when required all complete as approved and as per the instruction of the EIC (This item does not contain material but contains a one no. semi-skilled labour to maintain swimming pool)
16
-
17751.5
Total impact of GST for the purpose of CTC
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements