East Central Railway Tender

Supply of Bend GI pipe of 30mm dia x 4ft long (to suit the street light fitting) as per site requirement and fixing the same on pole with supply of suitable clamp, nut, bolt and washer.

Supply,& fixing of Metal body Exhaust Fans (non-capacitor type) No of poles -4 & 5 sweep size 300 mm (Make-Usha,Havells/crompton, Bajaj ) ( fixing of exhaust fan to be done by cutting the hole of required size in the wall along with supply and grouting of required nut, bolt & waser to suit the Ex-fan as per site requirement, including connection. )

Wiring of C- Fan/Ex-Fan point with PVC insulated, sheathed & stranded single core 6 copper conductor FRLS 1.5mm2 (Wire Make-Havells, anchor, Finolex, Polycab ) with ECC in PVC pipe in concealed with proper excavation and refilling the wall with proper plastering of the wall with supply & fixing of switch, ceiling rose .(make-Havells, anchor,Legrand, Slemens, L&T, Policab or C&S) on surface of wall with ECC including supply and fixing of switch and ceiling rose.

Wiring of plug point with PVC insulated, sheathed & stranded single core copper 7 conductor FRLS 1.5mm2 (Wire Make-Havells, anchor, Finolex, Polycab, Mescab & KEI) with ECC in PVC pipe in concealed with proper excavation and refilling the wall with proper plastering of the wall with supply & fixing of 5Amp plug & socket switch (make-Havells, Anchor, Legrand, L&T, Policab,Seimens or C&S)

Wiring of power plug point 15 Amp with PVC insulated, sheathed and stranded single 8 core, copper conductor FRLS 4mm2 (Wire Make-Havells, anchor, Finolex, Polycab, Mescab & KEI) with ECC in PVC pipe in concealed with proper excavation and refilling the wall with supply & fixing of 15Amp Power Plug & Socket flush type, 5 in 1 including controlling switch.(make-Havells, Anchor, Legrand, L&T, Seimens, Policab or C&S)

Wiring of metallic power plug with PVC insulated sheathed & stranded single core 9 copper conductor 4 mm2 (Wire Make-Havells, anchor, Finolex, Polycab & KEI) with ECC in PVC pipe in concealed with proper excavation and refilling the wall with proper plastering of the wall with supply & fixing of 20 Amp metallic power plug & socked and 20 Amp MCB-DP. (make-Havells, Anchor, Legrand, L&T, Seimens Policab or C&S)

Wiring of sub-Main Line with FRLS copper wire single core size 6mm2 multistrand with PVC pipe concealed with proper excavation and refilling the wall with proper plastering. (Wire Make- Havells,anchor, Finolex, Polycab, Mescab & KEI)

Wiring of Main Line with FRLS copper wire single core size 10mm2 multistand with PVC pipe in concealed with proper excavation and refilling the wall with proper plastering. (Wire Make-Havells,anchor, Finolex, Polycab, Mescab & KEI)

ISI marked four core circular armoured cross linked polyethylene (XLPE) LT insulateed cable. PVC outer sheathed armoured with galvanised round steel wire or steel strip and with 12 aluminium conducter suitable for rated voltage 1100 volts, grade conforming to IS:7098 [part-1]- 1988 with admt. no. 1,2 and 3 [reaffirmed 2005] size 4*25 sq. mm. The firm will have to submit type test report as per IS from NABl accredited lab alongwith the tender. Type test report should not be more than 10 years old on the date of bid opening.

Trenching, laying and back filling of XLPE cable as per Sr.DEE(G)/DHN's drg. No. EL/486-01 (cable will be supplied by the Railway)

Cable crossing across railway track/pucca road by boring hole at depth of 01 mtr by using 01(one) nos 100mm dia GI pipe(medium grade) with accessories.GI pipe with accessories will be supplied by the contractor.

Fixing, connection, testing & Supply of MCB Distribution Board 8-way (2-incomer ,6- outgoing),double door,IP-43-protection conforms to IS:8623-1&3, MCB 32A, DP, 10 KA, B-Curve, 15 conforms to IS:60898 - 1 No as incoming, MCB 10A, DP, 10 KA, C-Curve, conforms to IS:60898 3 Nos as outgoing. Make - L&T, Havells, Legrand ,C&S (Fixing of Distribution Board to be done with proper clamping arrangement as per the site requirement (normally concealed) and connection to be done with suitable conductor including supply of PVC flexiable pipe)

Provision (Supply and erection) of Earthing station (RI-7021) as per Drg.No. ETI/ 16 OHE/P/ 7020 or latest (The price shall cover supply and erection of an earth electrode (RI 7021) asper drawing no. ETI/OHE/P/7020. The price shall also cover the provision of a protective concrete Box with removable MS cover. The material should confirm to ACTM vol. II Part II Para 7.1.1 with figure A 3.01. The price shall cover the testing of earth value and painting the value on the earth pit. The earth electrode shall normally be of mild steel galvanized perforated pipe of not less than 44 mm nominal bore and about 3 meter length provided with a spike at one end and welded lug suitable for connecting directly Earth wire/MS flat of required size at other end. The connection of Earth wire/M S flats to each electrode shall be made through M S links by bolted joints, fasteners to be supplied by the contractor. The earth surrounding the electrode shall be chemically treated by alternate layers of fine charcoal and salt at least 150 mm all around. The item should be procured from approved supplier of CORE or RDSO, duly inspected by either RITES or Railway Representative deputed by Sr. Div. Elect.Engineer (G)/ Dhanbad.)

Installation, Connection, commissioning and Supply of Automatic supply changeover 17 switch colour light signaling panels,63 Amps for 3 source single phase supply suitable for 10KVA AT as per RDSO specification No.-TI/SPC/PSI/CLS/0020 with A&C slip no:1 to 4 or latest. Signaling panel should be fixed on the wall / floor with proper grouting as per the site requirement including connection with crimping of cable ends as required under the supervision of site incharge.

Supply, Installation, connection, testing, commissioning of Cubical type, wall/mast mounted, dust and vermin proof, LT control switch board, confirming to IS:8623 (Latest version), suitable for operation on single phase, 2-wire, 415V, AC supply system, fabricated with 16 SWG, CRCA 18 sheet, powder coated and complete with inter connections with copper conductor cable, copper busbars in bus chamber, clustered LED type indication lights, cable glands for incoming and outgoing, complete with TPN MCCB 63A, 35KA, fixed type (Ics=100% Icu)- 1 No., copper bus bars 200A, as per the drawing. Mounting to be done on wall/mast as per the site requirement, with 50x50x6 mm MS Flat clamps, earth studs etc. under the supervision of site incharge.

Fixing, connection, testing, commissioning & Supply of cable junction box IP-65 with metric knockouts for cable entry suitable for cable size 16/25 Sq.mm withouts terminals similar to Cat 19 No.-K9250 of HENSEL with Grommets IP-65 EDK-40- 2 Nos including fixing, cable junction boxes should be fixed on OHE mast with proper clamping arrangement comprising MS flat 32mm and suitable bolts nuts and washers as per the site requirement including connection with crimping of cable ends with suitable size of crimping socket as required under the supervision of site encharge2

Fixing, connection, testing, commissioning & Supply of Thermoplastic circuit breaker boxes with protective cover, IP65 protection similar to Cat No.-KV7106 of HENSEL, 1row 6 modules having 2XM20 knockouts each at top and bottom walls - 1 nos, alongwith Grommets IP65 M20-4 Nos 20 including supply of single core 10 Sq.mm multistrand cable-6 Meter Circuit breaker boxes should be fixed on OHE mast with proper clamping arrangement comprising MS flat 32mm and suitable bolts nuts and washers as per the site requirement including connection with crimping of cable ends with copper reducing lugs 6 Sq.mm (bottleneck type 4 nos. dowells make) as requirred under the supervision of site incharge.

Supply, Installation, connection, testing, commissioning of Invertor split AC, capacity 1.5 Ton, 5-star rating, with copper coil evaporator/condenser, single phase AC, Make- Blue star, Voltas, Lloyd, BPL, Carrier, Daikin, Samsung, LG or similar, with five years comprehensive warranty on the complete system. Installation of AC to be done along with supply of all required accessories 21 such as indoor/outdoor mounting bracket, additional power cable & copper pipes (if required), C-PVC drain pipe of suitable size as per the site requirement, complete in all respect, under the supervision of site incharge. This price shall also cover for making a hole of suitable diameter in the existing brick masonry/RCC wall for laying of cables, pipes etc. from indoor to outdoor unit in a neat and aesthetic manner. The hole shall be sealed with plaster of Paris to prevent entry of insects, rain water, lizards etc. Manufacturer's recommendations / instructions shall be strictly followed.

Supply & fixing of Busbar Chamber 4-way 100A (Make Havells/C&S/L&T) (Fixing with proper excavation and refilling the wall with proper re-plastering of the wall)

Installation, Testing, Commissioning & Supply of Outdoor, step down Transformer of 23 63 KVA, 11 KV/416 V , 3-phase 50Hz, Oil immeresed, ONAN type, Copper Wound with all standard fittings and accessories. Transformer to be installed on steel structure as per instruction of site incharge.

Transportation of 2nd hand rail pole 36 feet long ,from the point of delivery to site of erection and erection of the same with cement concret founadtion ratio 1:3:6 as per drg No EL/T/5-76

Scrapping, cleaning & painting of rail pole with 2-coats of Red Oxide primer for entire pole then 2-coatrs of alum. Paint from top up to 5ft above the ground level and 2-coats of Green/Black paint up to 5ft from the ground level

Making of Earthing pit 15' deep with Copper plate of size 600 mm x 600 mm x 3.15 26 mm with its top from ground level complete with 20 mm dia GI pipe fitted with alternate layers charcoal and salt at least 150 mm thick around, funnel for watering and one earthing lead 20 mm x 5 mm copper strip in GI pipe 30 mm medium gauge, masonry/housing with CI hinged cover plate with locking arrangement complete in all respect. (Copper strip up to ground level to be supplied).

Erection of Guard wire , including supply of GI wire having 02 nos, bearer wires of 4/6 SWG (GI) and provision of lacings with 8-SWG(GI), 1st lacing from the support structure being at 1- Mtr and subsequent lacings at 4- meter apart.

Only stringing/Drawing and Tensioning of ACSR conductor of size , and binding of conductor with insulators (Conductor will be supplied by railway)

Supply,Fabrication and fixing on the pole of MS Channel /angle bracket,top clamp,bracing,Guard bracket etc as per Sr.DEE(G)Drg. No. EL/SK/08-80 and Drg No. EL/T/3-76 and as per requirements including bolts,nuts and washers.

Supply & fixing of Gang Operated Switch vertical type, triple pole air brake outdoor 30 type with dropout fuse unit 400A capacity, suitable for 11KV, complete with 3-insulator, mounted type on suitable base complete with operating rod and locking arrangement including supply and fixing of padlock of Godrej make with key

Supply of 5 KA lightining Arrester (Line type) suitable for 11KV line as per IS: 3070 latest including testing and commisioning. 32

Supply & fixing of 'DANGER' Board complete with nut & bolts written for 33KV/11KV

Erection and Supply of 11 KV HT disc insulators, Antifog, glazed, Ball & Socket type, 33 duly cemented and fitted with SGI cap, forged steel ball pin and R shaped security clip attached of EMS 70KN conforming to Specn. IS:731-1971 complete with metallic parts with fixing. (Makes: Mayank/ Bharat/Jayshree, Birla Insulators or similar)

Supply of HT Pin insulator 11 KV, complete with metallic and non-metallic parts, including nuts, bolts and washers. (Accepted Makes: Mayank/ Bharat/Jayshree) .

Supply & erection of stay assembly 6 ft long 3/4" dia including anchor plate (Size 15"x15"x3/16" guy wire rope with cement concrete foundatiion of ratio 1:3:6 including fixing of the complete set

Supply, installation, testing & commissioning of LT panel consist of: (1) dsine MCCB- 400A-4 Pole, 50kA-01no. (Incoming) (2) dsine MCCB-200A-4 Pole, 50kA-01 no. (3) dsine MCCB-100A-4 36 Pole, 50kA-04 no (Outgoing) (4) 01 No. Voltmeter (0-500V), (5) 01 nos-Ammeter(0-150A), (6) Selector switch-02 nos. (7) Ind. lamp-03 nos. (8) Cu.busbar-25KG, (9) MS sheet metal 4'x3'x1.5' = 18Cu.ft etc. ' (Acceptable make: MCCB-SIEMENS/HAVELLS/L&T, Ammeter/Voltmeter/Sel. Switch make: Essma/Shruti Associates, HRC fuse-HPL/Hager)