Drinking Water And Sanitation Department Tender
... More
The DWSD has issued a formal invitation for competitive bids for the Drinking Water And Sanitation Department project, for Construction Of Rural Water Supply Scheme With 1.0 Hp Dc Solar Motor Pump Complete Set For Block-kuchai, Panchayat-gomiadih And Baruhatu, Village-karerango And Baruhatu Which Is Not Included In Mvs And Has No Electricity Or Less Electricity To Suppl in Saraikela Kharsawan, Jharkhand, with an estimated contract value of Rs. 10,63,000. The bid opening date for this tender is 07-01-2025 and the last date for bid submission is 15-01-2025. Interested bidders for Drinking Water And Sanitation Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Drinking Water And Sanitation Department - DWSD Tender
Civil And Construction
Water Storage And Supply
Eprocure
Opening Date7 Jan 2025
Closing Date15 Jan 2025
Tender Amount₹ 10,63,000
Costs
EMD
₹ 22,000Document Cost
₹ 2,500Tender Fee
Refer Documents
Summary
Construction Of Rural Water Supply Scheme With 1.0 Hp Dc Solar Motor Pump Complete Set For Block-kuchai, Panchayat-gomiadih And Baruhatu, Village-karerango And Baruhatu Which Is Not Included In Mvs And Has No Electricity Or Less Electricity To Suppl
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_DWSD_97304_3Bid Award Id
ViewTender No
DWSD/SKL/DT/25/2024-25Tender Authority
Drinking Water And Sanitation Department ViewPurchaser Address
-Website
http://https://jalshakti-ddws.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Information board for IEC
Providing structural steel work in trusses other similar trussed purlins and members with bracing gusset plates etc as per detailed design and drawing or as directed by Engineer- in-charge including cutting fabricating hoisting erecting and fixing in position making reverted bolted welded connections one coat of anticorrosive paint and over it two coats of oil painting etc complete (MJP 2019-2020 Sec F Item 6)
27.2
95
2592.7
... More
iii) The PV modules should be mounted on metallic structure of adequate strength and appropriate design which can withstand load of modules & High wind pressure up to 200Km/h.
-
-
-
... More
Carriage of materials from different sources or departmental stores to work site including loading, transporting, unloading and stacking the materials at work site etc. all complete job. as per direction of E/I.
-
-
-
... More
Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials ,labour ,royalty and taxes all complete as per building specification and direction of E/I(Mode of measurement compacted volume)
0.24
589
143.25
... More
18% GST
1
158854
158854.66
... More
Earth work in excavation in foundation trenches in ordinary soil and disposal of excavated earth as obtained to a distance up to 50.0m ,including all lifts, levelling ,ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design ,building specification and direction of E/I(vide classification of soil item -B)
4.37
167
731.9
... More
O & M Cost for 1st year
1
9000
9000
... More
x) The motor pump set should have a 5 years warranty.
-
-
-
... More
Cement Lead 20 Km (avg.)
0.95
436
414.2
... More
65 mm HDPE Pipe-
15
45
675
... More
20 mm HDPE Pipe-
150
12
1800
... More
O & M cost for 3rd Year
1
10987
10987.96
... More
Earth work in excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I.
81.25
150
12211.06
... More
Supplying all materials , labour and tools for fixing 15 mm dia G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge.
10
13
135.9
... More
Construction of galvanized tubular Steel structure staging for HDPE water storage Tank& Solar Panel.
For Structure :---
-
-
-
... More
Solar Photovoltaic (SPV) Solar Submersible D.C. Water Motor Pump
-
-
-
... More
Supplying materials , labours and equipment's for construction of 0.90M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform with stand post in house including 12 mm thick cement plaster in C.M. (1:4) with neat cement punning over exposed surface all complete job, as per approved design, specification and direction of E/I. (As per Annexure II Attached) 1.20 M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform -
10
1400
14000
... More
Providing and supplying High Density Polyethylene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties.
-
-
-
... More
Construction RCC Foundation for Steel structure staging & Solar panel
-
-
-
... More
Distribution
-
-
-
... More
(a)Foundation for Steel structure staging
Footing and Vertical Pedestal
Raft
0.81
4961
4019
... More
(1) Elbow 15 mm dia.
20
80
1615.6
... More
Transportation Charge
1
1000
1000
... More
Supplying materials , labours and equipment's for construction of 0.90M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform with stand post in house including 12 mm thick cement plaster in C.M. (1:4) with neat cement punning over exposed surface all complete job, as per approved design, specification and direction of E/I. (As per Annexure II Attached) 1.20 M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform -
10
1400
14000
... More
Solar Photovoltaic (SPV) Solar Submersible D.C. Water Motor Pump
-
-
-
... More
Lowering, Laying and Jointing H. D. P. E./M. D.P. E. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS Code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II.
-
-
-
... More
50 mm HDPE Pipe-
15
37
555
... More
Providing and supplying High Density Polyethylene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties.
-
-
-
... More
50 mm HDPE Pipe-
50
37
1850
... More
65mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:74.5 to 75.2mm wall Thickness End:9mm to 10.7mm, Barrel 9mm to 10.7 mm, Length: 3Mtrs.Rising main
15
221
3315
... More
Stone Chips Lead 20 Km (avg.)
1.58
406
641.86
... More
Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge.
3.49
55
192.93
... More
50 mm HDPE Pipe-
50
37
1850
... More
Carriage of materials from different sources or departmental stores to work site including loading, transporting, unloading and stacking the materials at work site etc. all complete job. as per direction of E/I.
-
-
-
... More
i) 1 HP (DC Pump) with 900 WP minimum watt P.V. Panel as MNRE pump head Max Shut-off head up to 120 mtrs. For higher or lower head or in between various modules output could be decided on prorates basis. (As per latest guide line of MNRE)
1
119000
119000
... More
(2) Reducer Socket - 20 x 15 mm dia.
10
83
838.9
... More
x) The motor pump set should have a 5 years warranty.
-
-
-
... More
Dismantling plain cement concrete work including stacking serviceable materials in countable stacks within 15 M lead and disposal of unserviceable materials with all leads all complete
2.25
955
2150.75
... More
O & M cost for 3rd Year
1
10987
10987.96
... More
Information board for IEC
Providing structural steel work in trusses other similar trussed purlins and members with bracing gusset plates etc as per detailed design and drawing or as directed by Engineer- in-charge including cutting fabricating hoisting erecting and fixing in position making reverted bolted welded connections one coat of anticorrosive paint and over it two coats of oil painting etc complete (MJP 2019-2020 Sec F Item 6)
27.2
95
2592.7
... More
O & M Cost for 1st year
1
9000
9000
... More
Providing nominal mix PCC of (1:4:8) in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M.2.5to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing and royalty all complete as per building specification and direction of E/I
0.24
4598
1117.37
... More
Annual Operation & Maintenance cost based on Existing D/T Well with solar motor pump for 5 years.
-
-
-
... More
Distribution
-
-
-
... More
v) To enhance the performance of SPV water pumping system & arrangement for seasonal tilt angle Adjustment should be provided
-
-
-
... More
Providing nominal mix PCC of (1:4:8) in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M.2.5to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing and royalty all complete as per building specification and direction of E/I
0.24
4598
1117.37
... More
Providing fitting & fixing 32 mm to 50 mm service HDPE saddle all complete job, as per approved design, specification and direction of E/I. (As per old model estimate)
10
54
540
... More
O & M cost for 5th Year
1
12346
12346.07
... More
20 mm HDPE Pipe-
150
12
1800
... More
Dismantling plain cement concrete work including stacking serviceable materials in countable stacks within 15 M lead and disposal of unserviceable materials with all leads all complete
2.25
955
2150.75
... More
(1) Elbow 15 mm dia.
20
80
1615.6
... More
Distribution
-
-
-
... More
50 mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:87.5 to 88.2mm wall Thickness End:9 .8 mm to 11.9mm, Barrel 7.3mm to 9 mm, Length: 3Mtrs. Delivery Pipe
15
157
2355
... More
Distribution
-
-
-
... More
65 mm dia Full way valve
2
1490
2981.4
... More
iv) The module mounting structure should be hot dip galvanized according to IS 4759.
-
-
-
... More
vi) Necessary arrangement should be provided in controller automatic start-run-stop through out the day with water level detection system. (As per MNRE Specification)
-
-
-
... More
Providing PCC M-200 with nominal mix of (1:1.5:3) with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of FM 2.5 to 3.0 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, sticking, curing , taxes and royalty all complete as per specification and direction of E/I. for construction of road cutting portion-
2.25
4961
11163.89
... More
(a)Foundation for Steel structure staging
Footing and Vertical Pedestal
Raft
0.81
4961
4019
... More
Providing and supplying High Density Polyethylene (HDPE ) fittings of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties.
1
1238
1238.99
... More
1% labour Cess
1
10413
10413.8
... More
Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials ,labour ,royalty and taxes all complete as per building specification and direction of E/I(Mode of measurement compacted volume)
0.24
589
143.25
... More
iii) The PV modules should be mounted on metallic structure of adequate strength and appropriate design which can withstand load of modules & High wind pressure up to 200Km/h.
-
-
-
... More
Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I
-
-
-
... More
50 mm HDPE Pipe-
15
37
555
... More
Provision of solar night lamp.
1
1000
1000
... More
a) Name of the Manufacturer or Distinctive Logo.
-
-
-
... More
Materials and labour for vinyl painting of matter given by department in different color (As per Market Rate)
1.26
2000
2520
... More
Providing 15 mm dia. G.I. pipe Tata or equivalent make as per IS 1239 (Part 1/2004) ISI Mark /medium quality in Stand Post.
10
120
1201.2
... More
65 mm HDPE Pipe-
15
45
675
... More
65mm dia
1
1328
1328.66
... More
Providing brick masonry chamber of inner size 600 x 600 x 450 mm deep for bore well protection having 125 mm thick wall and 75 mm R.C.C cover including cement plaster of exposed surface, etc all complete job
1
2719
2719
... More
Supplying all materials , labour and tools for fixing 15 mm dia G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge.
10
13
135.9
... More
i) The SPV modules should be as per IEC-61215 and IEC 61730 part 1.0)
-
-
-
... More
(4) Plain Socket -15 mm dia.
20
76
1539.8
... More
Sand Lead 20 Km (avg.)
1.03
406
418.43
... More
Making hole in Tank
4
25
100
... More
Solar submersible motor pump (SPV DC Type)
-
-
-
... More
32 mm HDPE Pipe-
80
47
3805.6
... More
For Rising
-
-
-
... More
Providing and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra socket all complete as per specification and direction of E/I. 15 dia and weight not less than 400 Gm
10
199
1995.8
... More
Supplying all labours, tools and equipments for dismantling of head & water tank assembly and taking out 32 mm dia old G.I. Pipe, connecting rod, cylinder assembly the dismantled components after necessary changing for making the T/W in good condition with all transportation including unused taken out materials back in store all complete job as per direction of E/I.
(As per Model Estimate of Solar Energy based Mini WSS. TS done by SE, Ranchi Circle & Circle Gumla dt. 21.05.2019)
1
677
677.23
... More
O & M cost for 2nd Year
1
10366
10366
... More
Making long screw in G.I. pipe including supplying and fitting jam nuts and extra socket etc.
4
158
634.36
... More
Providing and fixing Gun Metal Gate valve with C I wheel of approved quality(screwed end).
50 mm dia .
1
776
776.07
... More
c) Serial Number.
-
-
-
... More
65 mm HDPE Pipe-
15
45
675
... More
viii) The suction/delivery pipe shall be UPVC / H.D.P.E. pipes of appropriate size 60m or more as required minimum pressure rating of 8kg/Sq cm- PE 100 grade for pump up to 3HP & 10 Kg/Sq cm- PE 100 grade for 5 HP.
-
-
-
... More
20 mm HDPE Pipe-
150
25
3750
... More
vii) Necessary protection such as lightening arrestor etc. should be provided to protect the controller & SPV
-
-
-
... More
ii) All external parts of motor pump used in submersible pump which are in contact of water is stainless steel grade 303 or higher as required.
-
-
-
... More
Designing, Supplying, Installation, Testing & Commissioning with all tools & Parts of following Solar Photovoltaic (SPV) Solar Submersible D.C. Water Motor Pump Suitable for minimum 125mm x 115mm bore well as per MNRE Guideline with following specifications & accessories.
-
-
-
... More
Rising Main
-
-
-
... More
b) Model Number.
-
-
-
... More
Providing and fixing HDPE container Syntex or alike one piecemolded water tank made out of low density polythyler andbuilt corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity 5000.00 litres Capacity Water storage Tank(DWSD. Item No-01 M)
2000
7
15500
... More
(3) Nipple -15 mm dia.
20
78
1563.8
... More
SPV arrays contains specified No of same capacity type & specification modules connected to series or parallel to obtained the required voltage & current the power output of individual PV modules should be minimum 200 watt peak.
-
-
-
... More
xiv) With third party inspection before dispatch.
-
-
-
... More
Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main Including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dm ferrule weight not less than 425 gram.
10
623
6232.9
... More
Provision of one no SIM card & its recharging cost for RMC
5
800
4000
... More
Carrying out recuperation/Yield Test for ascertaining the discharge of constructed well/ excavated profile as directed by the IEC. The test out by the drawing down water from the well/ profile below normal/subsoil water level up to full depth rise is recorded the normal water level/subsoil water level in the well / profile as well as strainer/level at pump as per design of W.S. scheme shall be recorded prior to the test including cost of all materials, over Load , Labours etc. complete as directed.
1
1865
1865
... More
20 mm HDPE Pipe-
150
25
3750
... More
Providing for steel reinforcement as per approved design and drawing excluding carriage of T.S. bar to work site cutting, bending with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/I.
0.16
82096
13135.45
... More
xii) The SPV controller must have IP-65 protection or must be housed in cabinet having at least IP-65 protection.
-
-
-
... More
Providing brick masonry chamber of inner size 600 x 600 x 450 mm deep for bore well protection having 125 mm thick wall and 75 mm R.C.C cover including cement plaster of exposed surface, etc all complete job
1
2719
2719
... More
Manufacture, supply and Delivery of following Nominal dia UPVC column pipes including PVC socket (Coupler),
-
-
-
... More
63 mm HDPE Pipe-
15
185
2787.9
... More
Solar submersible motor pump (SPV DC Type)
-
-
-
... More
O & M cost for 4th Year
1
11647
11647.24
... More
50 mm HDPE Pipe-
50
117
5852
... More
i) The SPV modules should be as per IEC-61215 and IEC 61730 part 1.0)
-
-
-
... More
c) Serial Number.
-
-
-
... More
Providing and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra socket all complete as per specification and direction of E/I. 15 dia and weight not less than 400 Gm
10
199
1995.8
... More
65mm dia
1
1328
1328.66
... More
65 mm dia Full way valve
2
1490
2981.4
... More
Rising and Distribution Network with House Connection up to 10 Nos. including Platform & Stand post
-
-
-
... More
65 mm HDPE Pipe-
15
45
675
... More
Materials and labour for vinyl painting of matter given by department in different color (As per Market Rate)
1.26
2000
2520
... More
iv) The module mounting structure should be hot dip galvanized according to IS 4759.
-
-
-
... More
Providing RCC M-20 in nominal mix of (1:1.5:3) in columns with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M.2.5to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing and royalty all complete as per building specification and direction of E/I.
-
-
-
... More
ix) All cable used shall be as per IS 694. Suitable size of cable shall be used in sufficient length for inter connection between the SPV array to SPV controller and SPV controller to solar power pump. Provision of cable shall be as per IS 14536.
-
-
-
... More
Providing 15 mm dia. G.I. pipe Tata or equivalent make as per IS 1239 (Part 1/2004) ISI Mark /medium quality in Stand Post.
10
120
1201.2
... More
Tie Beam
0.27
5989
1623.21
... More
Lifting of 5000 Litrs Capacity Tank up to 4.00m height with lifting tools with rope and labour
1
500
500
... More
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design.With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. Full way valve chamber
1
1712
1712.15
... More
Provision of solar night lamp.
1
1000
1000
... More
O & M cost for 5th Year
1
12346
12346.07
... More
Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I
-
-
-
... More
Providing structural steel galvanised squre pipe section work in trusses, other similar trussed purlins and members with all bracing ,gusset plates etc as per detailed design and drawing or as directed by Engineer- in-charge ,including cutting fabricating ,hoisting , erecting and fixing in position , making riveted/bolted /welded connections and one coat of anticorrosive paint and over it two coat of all oil painting & For Structure(PLUS) Providing and applying materials &labour for hot dip galvanizing of above structure including transportation for galvanizing minimum thickness 80microns (Net wt. of components to be Galv) preferably TATA structural section etc complete.
1039.53
104
108464.56
... More
i) 1 HP (DC Pump) with 900 WP minimum watt P.V. Panel as MNRE pump head Max Shut-off head up to 120 mtrs. For higher or lower head or in between various modules output could be decided on prorates basis. (As per latest guide line of MNRE)
1
119000
119000
... More
Providing and fixing Gun Metal full way valve of approved quality, all complete, as per specification and direction of E/I. 50 mm dia and weight not less than 1.5 Kg.
1
1552
1552.85
... More
Providing RCC M-20 in nominal mix of (1:1.5:3) in columns with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M.2.5to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing and royalty all complete as per building specification and direction of E/I.
-
-
-
... More
Tie Beam
0.27
5989
1623.21
... More
Carrying out recuperation/Yield Test for ascertaining the discharge of constructed well/ excavated profile as directed by the IEC. The test out by the drawing down water from the well/ profile below normal/subsoil water level up to full depth rise is recorded the normal water level/subsoil water level in the well / profile as well as strainer/level at pump as per design of W.S. scheme shall be recorded prior to the test including cost of all materials, over Load , Labours etc. complete as directed.
1
1865
1865
... More
50 mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:87.5 to 88.2mm wall Thickness End:9 .8 mm to 11.9mm, Barrel 7.3mm to 9 mm, Length: 3Mtrs. Delivery Pipe
15
157
2355
... More
Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge. 85% of Excavated Qty. -
69.06
93
6486.81
... More
xv) Provision for web based remote monitoring of the pumps to be installed must be made through the inbuilt controllers . It should be possible to ascertain the daily water output, the power generated by PV Array ,the Up and down time of the pump during the year, number of days the pump was unused or under breakdown repairs.
-
-
-
... More
O & M cost for 4th Year
1
11647
11647.24
... More
32 mm HDPE Pipe-
80
23
1840
... More
Manufacture, supply and Delivery of following Nominal dia UPVC column pipes including PVC socket (Coupler),
-
-
-
... More
Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge. 85% of Excavated Qty. -
69.06
93
6486.81
... More
Providing fitting & fixing 32 mm to 50 mm service HDPE saddle all complete job, as per approved design, specification and direction of E/I. (As per old model estimate)
10
54
540
... More
Lowering, Laying and Jointing H. D. P. E./M. D.P. E. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS Code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II.
-
-
-
... More
Providing for steel reinforcement as per approved design and drawing excluding carriage of T.S. bar to work site cutting, bending with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/I.
0.16
82096
13135.45
... More
v) To enhance the performance of SPV water pumping system & arrangement for seasonal tilt angle Adjustment should be provided
-
-
-
... More
Block Kuchai , Panchyat : Gomiyadih , Village : Baruhatu , Tola : Kadrango Model 1B
-
-
-
... More
Stone Chips Lead 20 Km (avg.)
1.58
406
641.86
... More
Providing and fixing Gun Metal full way valve of approved quality, all complete, as per specification and direction of E/I. 50 mm dia and weight not less than 1.5 Kg.
1
1552
1552.85
... More
xi) Control panel suitable for motor pump with arrangement of dry run & over flow protection sensor, float switch & rain prevention box. (As per MNRE Specification)
-
-
-
... More
xv) Provision for web based remote monitoring of the pumps to be installed must be made through the inbuilt controllers . It should be possible to ascertain the daily water output, the power generated by PV Array ,the Up and down time of the pump during the year, number of days the pump was unused or under breakdown repairs.
-
-
-
... More
xi) Control panel suitable for motor pump with arrangement of dry run & over flow protection sensor, float switch & rain prevention box. (As per MNRE Specification)
-
-
-
... More
Providing structural steel galvanised squre pipe section work in trusses, other similar trussed purlins and members with all bracing ,gusset plates etc as per detailed design and drawing or as directed by Engineer- in-charge ,including cutting fabricating ,hoisting , erecting and fixing in position , making riveted/bolted /welded connections and one coat of anticorrosive paint and over it two coat of all oil painting & For Structure(PLUS) Providing and applying materials &labour for hot dip galvanizing of above structure including transportation for galvanizing minimum thickness 80microns (Net wt. of components to be Galv) preferably TATA structural section etc complete.
1039.53
104
108464.56
... More
The following details should be marked indelibly on the motor pump set
-
-
-
... More
Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge.
3.49
55
192.93
... More
32 mm HDPE Pipe-
80
23
1840
... More
65mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:74.5 to 75.2mm wall Thickness End:9mm to 10.7mm, Barrel 9mm to 10.7 mm, Length: 3Mtrs.Rising main
15
221
3315
... More
Cement Lead 20 Km (avg.)
0.95
436
414.2
... More
viii) The suction/delivery pipe shall be UPVC / H.D.P.E. pipes of appropriate size 60m or more as required minimum pressure rating of 8kg/Sq cm- PE 100 grade for pump up to 3HP & 10 Kg/Sq cm- PE 100 grade for 5 HP.
-
-
-
... More
Annual Operation & Maintenance cost based on Existing D/T Well with solar motor pump for 5 years.
-
-
-
... More
(2) Reducer Socket - 20 x 15 mm dia.
10
83
838.9
... More
Construction of galvanized tubular Steel structure staging for HDPE water storage Tank& Solar Panel.
For Structure :---
-
-
-
... More
Rising and Distribution Network with House Connection up to 10 Nos. including Platform & Stand post
-
-
-
... More
Earth work in excavation in foundation trenches in ordinary soil and disposal of excavated earth as obtained to a distance up to 50.0m ,including all lifts, levelling ,ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design ,building specification and direction of E/I(vide classification of soil item -B)
4.37
167
731.9
... More
Lifting of 5000 Litrs Capacity Tank up to 4.00m height with lifting tools with rope and labour
1
500
500
... More
Supplying all labours, tools and equipments for dismantling of head & water tank assembly and taking out 32 mm dia old G.I. Pipe, connecting rod, cylinder assembly the dismantled components after necessary changing for making the T/W in good condition with all transportation including unused taken out materials back in store all complete job as per direction of E/I.
(As per Model Estimate of Solar Energy based Mini WSS. TS done by SE, Ranchi Circle & Circle Gumla dt. 21.05.2019)
1
677
677.23
... More
vii) Necessary protection such as lightening arrestor etc. should be provided to protect the controller & SPV
-
-
-
... More
Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main Including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dm ferrule weight not less than 425 gram.
10
623
6232.9
... More
The following details should be marked indelibly on the motor pump set
-
-
-
... More
Designing, Supplying, Installation, Testing & Commissioning with all tools & Parts of following Solar Photovoltaic (SPV) Solar Submersible D.C. Water Motor Pump Suitable for minimum 125mm x 115mm bore well as per MNRE Guideline with following specifications & accessories.
-
-
-
... More
Column
0.56
5989
3378.2
... More
Installation of 5000 liters Capacity Water Storage Tank
-
-
-
... More
xiv) With third party inspection before dispatch.
-
-
-
... More
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design.With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. Full way valve chamber
1
1712
1712.15
... More
For Rising
-
-
-
... More
Transportation Charge
1
1000
1000
... More
ix) All cable used shall be as per IS 694. Suitable size of cable shall be used in sufficient length for inter connection between the SPV array to SPV controller and SPV controller to solar power pump. Provision of cable shall be as per IS 14536.
-
-
-
... More
63 mm HDPE Pipe-
15
185
2787.9
... More
a) Name of the Manufacturer or Distinctive Logo.
-
-
-
... More
Providing and fixing Gun Metal Gate valve with C I wheel of approved quality(screwed end).
50 mm dia .
1
776
776.07
... More
50 mm HDPE Pipe-
50
117
5852
... More
Construction RCC Foundation for Steel structure staging & Solar panel
-
-
-
... More
(4) Plain Socket -15 mm dia.
20
76
1539.8
... More
Making long screw in G.I. pipe including supplying and fitting jam nuts and extra socket etc.
4
158
634.36
... More
SPV arrays contains specified No of same capacity type & specification modules connected to series or parallel to obtained the required voltage & current the power output of individual PV modules should be minimum 200 watt peak.
-
-
-
... More
Earth work in excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I.
81.25
150
12211.06
... More
32 mm HDPE Pipe-
80
47
3805.6
... More
Providing PCC M-200 with nominal mix of (1:1.5:3) with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of FM 2.5 to 3.0 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, sticking, curing , taxes and royalty all complete as per specification and direction of E/I. for construction of road cutting portion-
2.25
4961
11163.89
... More
b) Model Number.
-
-
-
... More
Making hole in Tank
4
25
100
... More
Sand Lead 20 Km (avg.)
1.03
406
418.43
... More
Provision of one no SIM card & its recharging cost for RMC
5
800
4000
... More
(3) Nipple -15 mm dia.
20
78
1563.8
... More
O & M cost for 2nd Year
1
10366
10366
... More
xiii) The system should be as per MNRE guide line & Eco-friendly with suitable arrangement to operate new pump manually.
-
-
-
... More
Providing and supplying High Density Polyethylene (HDPE ) fittings of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties.
1
1238
1238.99
... More
xii) The SPV controller must have IP-65 protection or must be housed in cabinet having at least IP-65 protection.
-
-
-
... More
Providing and fixing HDPE container Syntex or alike one piecemolded water tank made out of low density polythyler andbuilt corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity 5000.00 litres Capacity Water storage Tank(DWSD. Item No-01 M)
2000
7
15500
... More
ii) All external parts of motor pump used in submersible pump which are in contact of water is stainless steel grade 303 or higher as required.
-
-
-
... More
Block Kuchai , Panchyat : Gomiyadih , Village : Baruhatu , Tola : Baruhatu Model 1B
-
-
-
... More
Rising Main
-
-
-
... More
vi) Necessary arrangement should be provided in controller automatic start-run-stop through out the day with water level detection system. (As per MNRE Specification)
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements