Drinking Water And Sanitation Department Tender
... More
Search from across the categories, cities, and authorities to find the latest Jharkhand tenders. Every Jharkhand tender is curated from credible sources of government websites (eProcurement Jharkhand portal) and newspapers, thus ensuring the credibility of the information presented to you. For more information on Jharkhand tender bidder registration, the login process and more read the FAQs section on this page.
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_DWSD_46929_1Bid Award Id
ViewTender No
Notice No-01/2020-21 (2nd Call)Tender Authority
Drinking Water And Sanitation Department ViewPurchaser Address
-Website
http://jharkhandtenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
GI Pipe 50 mm dia (TATA or equivalent make)
(M193)
1
-
-
... More
Jute
(M337)
1
-
-
... More
G.M. Ferrules (M922)
-
-
-
... More
(i) 8 mm dia Wt. not less than 400 gms
1
-
-
... More
(ii) 10 mm dia Wt. not less than 400 gms
1
-
-
... More
(iii) 15 mm dia Wt. not less than 400 gms
1
-
-
... More
(iv) 20 mm dia Wt. not less than 600 gms
1
-
-
... More
(v) 25 mm dia Wt. not less than 900 gms
1
-
-
... More
Stop Cocks (M923)
-
-
-
... More
(i) 15 mm brass stop cock wt. not less than 300 gms
1
-
-
... More
(ii) 20 mm brass stop cock wt. not less than 400 gms
1
-
-
... More
(iii) 25 mm brass stop cock wt. not less than 575 gms
1
-
-
... More
(iv) 32 mm brass stop cock wt. not less than 850 gms
1
-
-
... More
(v) 40 mm brass stop cock wt. not less than 1.15 kg
1
-
-
... More
(vi) 50 mm brass stop cock wt. not less than 2.15 kg
1
-
-
... More
(vii) 15 mm dia C.I. Body brass working part stop cock.
1
-
-
... More
(viii) 20 mm dia C.I. Body brass working part stop cock.
1
-
-
... More
(ix) 25 mm dia C.I. Body brass working part stop cock.
1
-
-
... More
G.M. Full way Valve (M924)
-
-
-
... More
(i) 15 mm dia wt. not less than 300 gms without wheel
1
-
-
... More
(ii) 20 mm dia wt. not less than 400 gms without wheel
1
-
-
... More
(iii) 25 mm dia wt. not less than 500 gms without wheel
1
-
-
... More
(iv) 32 mm dia wt. not less than 700 gms without wheel
1
-
-
... More
(v) 40 mm dia wt. not less than 1.0 kg without wheel
1
-
-
... More
(vi) 50 mm dia wt. not less than 1.4 kg without wheel
1
-
-
... More
(vii) 65 mm dia wt. not less than 1.8 kg without wheel
1
-
-
... More
(viii) 80 mm dia wt. not less than 2.5 kg without wheel
1
-
-
... More
G.M. NON RETURN VALVE VERTICLE (M925)
-
-
-
... More
(i) 15 mm dia wt. not less than 150 gms
1
-
-
... More
(ii) 20 mm dia wt. not less than 250 gms
1
-
-
... More
(iii) 25 mm dia wt. not less than 375 gms
1
-
-
... More
(iv) 32 mm dia wt. not less than 600 gms
1
-
-
... More
(v) 40 mm dia wt. not less than 700 gms
1
-
-
... More
(vi) 50 mm dia wt. not less than 1.0 kg
1
-
-
... More
(vii) 65 mm dia wt. not less than 1.20 kg
1
-
-
... More
(viii) 80 mm dia wt. not less than 1.50 kg
1
-
-
... More
(ix) 100 mm dia wt. not less than 1.80 kg
1
-
-
... More
G.M. Non Return Valve Horizontal (M926)
-
-
-
... More
(i) 15 mm dia wt. not less than 150 gms
1
-
-
... More
(ii) 20 mm dia wt. not less than 250 gms
1
-
-
... More
(iii) 25 mm dia wt. not less than 375 gms
1
-
-
... More
(iv) 32 mm dia wt. not less than 600 gms
1
-
-
... More
(v) 40 mm dia wt. not less than 700 gms
1
-
-
... More
(vi) 50 mm dia wt. not less than 1.0 kg
1
-
-
... More
(vii) 65 mm dia wt. not less than 1.20 kg
1
-
-
... More
(viii) 80 mm dia wt. not less than 1.50 kg
1
-
-
... More
(ix) 100 mm dia wt. not less than 1.80 kg
1
-
-
... More
COCKs (M927)
-
-
-
... More
(i) 15 mm dia G.M. bib cock wt. not less than 300 gms
1
-
-
... More
(ii) 15 mm dia brass bib cock wt. not less than 400 gms
1
-
-
... More
(iii) 15 mm dia C.I. bib cock wt. not less than 400 gms
1
-
-
... More
(iv) 15 mm dia C.I. Body brass working part spray painted bib cock wt. not less than 400 gms
1
-
-
... More
(v) 15 mm dia C.I. Brass pillar cock cock wt. not less than 400 gms
1
-
-
... More
(vi) 15 mm C.I. Plug cock ordinary
1
-
-
... More
(vii) 15 mm C.I. push cock ordinary
1
-
-
... More
CHROMIUM PLATED BRASS FITTINGS (M928)
-
-
-
... More
(i) C.P. Shower rose 100 mm dia
1
-
-
... More
(ii) C.P. Shower rose 125 mm dia
1
-
-
... More
(iii) P.V.C. Shower rose 150 mm dia
1
-
-
... More
(iv) P.V.C Shower rose 125 mm dia
1
-
-
... More
CONNECTION PIPE (M929)
-
-
-
... More
(i) 15 mm dia x 30 cm. long lead connection pipe with brass fittings.
1
-
-
... More
(ii) 15 mm dia x 45 cm. long lead connection pipe with brass fittings.
1
-
-
... More
(iii) 15 mm dia x 30 cm. long PVC connection pipe with brass fittings.
1
-
-
... More
(iv) 15 mm dia x 45 cm. long PVC connection pipe with brass fittings.
1
-
-
... More
G.I. FITTINGS (CONFORMING TO I.S. -1879 ) ISI Marked
(M930)
-
-
-
... More
[A] G.I. BEND
-
-
-
... More
(i) 15 mm
1
-
-
... More
(ii) 20 mm
1
-
-
... More
(iii) 25 mm
1
-
-
... More
(iv) 32 mm
1
-
-
... More
(v) 40 mm
1
-
-
... More
(vi) 50 mm
1
-
-
... More
(vii) 65 mm
1
-
-
... More
(viii) 80 mm
1
-
-
... More
(ix) 100 mm
1
-
-
... More
(x) 125 mm
1
-
-
... More
(xi) 150 mm
1
-
-
... More
[B] ELBOW OF THE FOLLOWING SIZES
-
-
-
... More
(i) 15 mm
1
-
-
... More
(ii) 20 mm
1
-
-
... More
(iii) 25 mm
1
-
-
... More
(iv) 32 mm
1
-
-
... More
(v) 40 mm
1
-
-
... More
(vi) 50 mm
1
-
-
... More
(vii) 65 mm
1
-
-
... More
(viii) 80 mm
1
-
-
... More
(ix) 100 mm
1
-
-
... More
(x) 125 mm
1
-
-
... More
(xi) 150 mm
1
-
-
... More
[C] TEE PLAIN OF THE FOLLOWING SIZES
-
-
-
... More
(i) 15 mm
1
-
-
... More
(ii) 20 mm
1
-
-
... More
(iii) 25 mm
1
-
-
... More
(iv) 32 mm
1
-
-
... More
(v) 40 mm
1
-
-
... More
(vi) 50 mm
1
-
-
... More
(vii) 65 mm
1
-
-
... More
(viii) 80 mm
1
-
-
... More
(ix) 100 mm
1
-
-
... More
(x) 125 mm
1
-
-
... More
(xi) 150 mm
1
-
-
... More
[D] REDUCING TEE PLAIN OF THE FOLLOWING SIZES (Taking larger dimension)
-
-
-
... More
(i) 20 mm
1
-
-
... More
(ii) 25 mm
1
-
-
... More
(iii) 32 mm
1
-
-
... More
(iv) 40 mm
1
-
-
... More
(v) 50 mm
1
-
-
... More
(vi) 65 mm
1
-
-
... More
(vii) 80 mm
1
-
-
... More
(viii) 100 mm
1
-
-
... More
(ix) 125 mm
1
-
-
... More
(x) 150 mm
1
-
-
... More
[E] SOCKET PLAIN OF THE FOLLOWING SIZE (Taking larger dimension)
-
-
-
... More
(i) 15 mm
1
-
-
... More
(ii) 20 mm
1
-
-
... More
(iii) 25 mm
1
-
-
... More
(iv) 32 mm
1
-
-
... More
(v) 40 mm
1
-
-
... More
(vi) 50 mm
1
-
-
... More
(vii) 65 mm
1
-
-
... More
(viii) 80 mm
1
-
-
... More
(ix) 100 mm
1
-
-
... More
(x) 125 mm
1
-
-
... More
(xi) 150 mm
1
-
-
... More
[F] REDUCING SOCKET PLAIN OF THE FOLLOWING SIZES (Taking larger dimension)
-
-
-
... More
(i) 20 mm
1
-
-
... More
(ii) 25 mm
1
-
-
... More
(iii) 32 mm
1
-
-
... More
(iv) 40 mm
1
-
-
... More
(v) 50 mm
1
-
-
... More
(vi) 65 mm
1
-
-
... More
(vii) 80 mm
1
-
-
... More
(viii) 100 mm
1
-
-
... More
(ix) 125 mm
1
-
-
... More
(x) 150 mm
1
-
-
... More
[G] UNION SOCKET OF THE FOLLOWING SIZES
-
-
-
... More
(i) 15 mm
1
-
-
... More
(ii) 20 mm
1
-
-
... More
(iii) 25 mm
1
-
-
... More
(iv) 32 mm
1
-
-
... More
(v) 40 mm
1
-
-
... More
(vi) 50 mm
1
-
-
... More
(vii) 65 mm
1
-
-
... More
(viii) 80 mm
1
-
-
... More
(ix) 100 mm
1
-
-
... More
(x) 125 mm
1
-
-
... More
(xi) 150 mm
1
-
-
... More
[H] PLUGS OF THE FOLLOWING SIZES
-
-
-
... More
(i) 15 mm
1
-
-
... More
(ii) 20 mm
1
-
-
... More
(iii) 25 mm
1
-
-
... More
(iv) 32 mm
1
-
-
... More
(v) 40 mm
1
-
-
... More
(vi) 50 mm
1
-
-
... More
(vii) 65 mm
1
-
-
... More
(viii) 80 mm
1
-
-
... More
(ix) 100 mm
1
-
-
... More
(x) 125 mm
1
-
-
... More
(xi) 150 mm
1
-
-
... More
[I] JAM NUTS OF THE FOLLOWING SIZES
-
-
-
... More
(i) 15 mm
1
-
-
... More
(ii) 20 mm
1
-
-
... More
(iii) 25 mm
1
-
-
... More
(iv) 32 mm
1
-
-
... More
(v) 40 mm
1
-
-
... More
(vi) 50 mm
1
-
-
... More
(vii) 65 mm
1
-
-
... More
(viii) 80 mm
1
-
-
... More
(ix) 100 mm
1
-
-
... More
(x) 125 mm
1
-
-
... More
(xi) 150 mm
1
-
-
... More
[J] G.I. NIPPLE OF THE FOLLOWING SIZES
-
-
-
... More
(i) 15 mm dia x 100 mm long
1
-
-
... More
(ii) 20 mm dia x 100 mm long
1
-
-
... More
(iii) 25 mm dia x 100 mm long
1
-
-
... More
(iv) 32mm dia x 100 mm long
1
-
-
... More
(v) 40 mm dia x 100 mm long
1
-
-
... More
(vi) 50 mm dia x 100 mm long
1
-
-
... More
(vii) 65 mm dia x 100 mm long
1
-
-
... More
(viii) 80 mm dia x 100 mm long
1
-
-
... More
(ix) 100 mm dia x 100 mm long
1
-
-
... More
[K] G.I. PIPES MIDIUM(Tata mark) OR EQUIVALENT as per IS-1239 (part-01)/2004 ISI Marked/Medium Quality
-
-
-
... More
(i) 15 mm dia
1
-
-
... More
(ii) 20 mm dia
1
-
-
... More
(iii) 25 mm dia
1
-
-
... More
(iv) 32 mm dia
1
-
-
... More
(v) 40 mm dia
1
-
-
... More
(vii) 65 mm dia
1
-
-
... More
MIRRORS (M931)
-
-
-
... More
(a) Mirror of 6 mm thick plain glass 600 mm x 450 mm beveled edge mirror including C.P. brass revolving fittings 3 mm plywood board and C.P. hinges etc. to fix the mirror
1
-
-
... More
(b) -do- 450 mm x 300 mm -do-
1
-
-
... More
(a) Glass shelf 600 mm x 125 mm with C.P. brass rail (M932)
1
-
-
... More
(b) -do- 450 mm x 125 mm -do-
1
-
-
... More
(a) C.P. Brass towel rail 20 mm x 600 mm with bracket all complete (M933)
1
-
-
... More
(b) Anodized aluminum 20 mm x 600 mm towel rail complete with brackets
1
-
-
... More
C.P. brass soap dish medium quality with screw and hinges etc. (M934)
1
-
-
... More
C.P. liquid soap solution holder
(M935)
1
-
-
... More
VITREOUS WHITE GLAZED INDIAN WATER CLOSET OF Hindustan / Parry Ware / Cera / Naycer or any other equivalent make
(M936)
-
-
-
... More
(a) 580 mm long
1
-
-
... More
(b) 510 mm long
1
-
-
... More
(c) 450 mm long
1
-
-
... More
(d) 510 mm long White glazed fiber I.W.C
1
-
-
... More
PAIR OF VETREOUS WHITE GLAZED FOOT REST OF Hindustan / Parryware / Cera / Naycer or any other equivalent make (M937)
1
-
-
... More
15 liters capacity pull and let go high level C.I. cistern complete with ball cock and a pair of bracket
(M938)
1
-
-
... More
(a) 12.5 liters lowdown C.I. Cistern
(M939)
1
-
-
... More
(b) 10.0 liters capacity P.V.C. low design cistern
1
-
-
... More
(a) White Glazed vitreous E.W.C with "P" trap or any other equivalent make. (M940)
1
-
-
... More
(b) E.W.C with "S" trap 400 mm high of Hindustan / Parry ware / Cera / Naycear or any other equivalent make
1
-
-
... More
(c) Black / white plastic seat for E.W.C -do- as above.
1
-
-
... More
(a) White glazed vitreous earthen were urinal flat back of Hindustan / Parryware / Cera / Naycer or any other equivalent make 600 mm x 350 mm size. (M941)
1
-
-
... More
(b) -do- squatting small 450 mm x 350 mm
1
-
-
... More
(c) -do- squatting large 600 mm x 350 mm
1
-
-
... More
(d) White glazed vitreous earthen ware urinal standing corner size 600 mm x 350 mm Hindustan / Parryware / Cera / Naycer or any other equivalent make
1
-
-
... More
(e) Partition plate for urinal 25" x 13" size
1
-
-
... More
(f) 5 liters C.I. automatic cistern with all P.V.C fittings
1
-
-
... More
White glazed vitreous Wash Hand Basin 550 mm x 400 mm size of Hindustan / Parryware / Cera / Naycer or any other equivalent make.
(M942)
1
-
-
... More
White glazed vitreous earthen ware kitchen sinks of Hindustan / Parryware / Cera / Naycer or any other equivalent make
(M943)
-
-
-
... More
(a) Kitchen sink 600 mm x 450 mm x 200 mm (24" x 18" x 8")
1
-
-
... More
(b) Kitchen sink 600 mm x 450 mm x 250 mm (24" x 18" x 10")
1
-
-
... More
(c) Lab sink 450 mm x 300 mm x 150 mm (18" x 12" x 6")
1
-
-
... More
(d) Lab sink 300 mm x 250 mm x 150 mm (12" x 10" x 6")
1
-
-
... More
DRAIN BOARD. (M944)
-
-
-
... More
(a) 600 mm x 450 mm (24" x 18")
1
-
-
... More
(b) 525 mm x 450 mm (21" x 18")
1
-
-
... More
H.C.I. Pipes (M945)
-
-
-
... More
(a) 50 mm dia single socket 6'-0" (with ear weight 13 kg)
1
-
-
... More
(b) 80 mm dia single socket 6'-0" (with ear weight 18 kg)
1
-
-
... More
(c) 100 mm dia single socket 6'-0" (with ear weight 23 kg)
1
-
-
... More
(d) 150 mm dia single socket 6'-0" (with ear weight 30 kg)
1
-
-
... More
(e) 50 mm dia double socket 6'-0" (with ear weight 14 kg)
1
-
-
... More
(f) 80 mm dia double socket 6'-0" (with ear weight 19 kg)
1
-
-
... More
(g) 100 mm dia double socket 6'-0" (with ear weight 25 kg)
1
-
-
... More
(h) 150 mm dia double socket 6'-0" (with ear weight 13 kg)
1
-
-
... More
(i) 50 mm dia single socket 3'-0" (with ear weight 7.25 kg)
1
-
-
... More
(j) 80 mm dia single socket 3'-0" (with ear weight 10.5 kg)
1
-
-
... More
(k) 100 mm dia single socket 3'-0" (with ear weight 13.75 kg)
1
-
-
... More
(l) 150 mm dia single socket 3'-0" with ear
1
-
-
... More
(m) 50 mm dia single socket 2'-0" (with ear weight 5.35 kg)
1
-
-
... More
(n) 80 mm dia single socket 2'-0" (with ear weight 8.00 kg)
1
-
-
... More
(o)100 mm dia single socket 2'-0"(with ear weight 10.10 kg)
1
-
-
... More
(p) 150 mm dia single socket 2'-0" with ear
1
-
-
... More
(q) 50 mm dia single socket 1'-0" (with ear weight 3.4 kg)
1
-
-
... More
(r) 80 mm dia single socket 1'-0"(with ear weight 5.50 kg)
1
-
-
... More
(s) 100 mm dia single socket 1'-0"(with ear weight 7.60 kg)
1
-
-
... More
(t) 150 mm dia single socket
1
-
-
... More
H.C.I. FITTINGS. (M946)
-
-
-
... More
(I) Plain bend of following size
-
-
-
... More
(a) 50 mm dia (weight without ear and socket 2.75 kg)
1
-
-
... More
(b) 80 mm dia (weight without ear and socket 3.5 kg)
1
-
-
... More
(c) 100 mm dia (weight without ear and socket 4.5 kg)
1
-
-
... More
(d) 150 mm dia (weight without ear and socket 4.5 kg)
1
-
-
... More
(II) Bend with door with following size
-
-
-
... More
(a) 50 mm dia (Wight without ear and socket 2.75 kg)
1
-
-
... More
(b) 80 mm dia (Wight without ear and socket 4.00 kg)
1
-
-
... More
(c) 100 mm dia -do- 5.5 kg
1
-
-
... More
(d) 150 mm dia -do-
1
-
-
... More
(III) Single Junction with door of followings sizes.
-
-
-
... More
(a) 50 mm dia (weight without ear and socket 3.75 kg)
1
-
-
... More
(b) 80 mm dia (weight without ear and socket 6.50 kg)
1
-
-
... More
(c) 100 mm dia -do- 9.50 kg
1
-
-
... More
(d) 150 mm dia -do-
1
-
-
... More
(IV) Double junction with door of following sizes.
-
-
-
... More
(a) 50 mm dia -do- 4.5 kg
1
-
-
... More
(b) 80 mm dia -do- 7.00 kg
1
-
-
... More
(c) 100 mm dia -do- 13.00 kg
1
-
-
... More
(d) 150 mm dia -do-
1
-
-
... More
(V) Heel rest bend of following sizes
-
-
-
... More
(a) 50 mm dia
1
-
-
... More
(b) 80 mm dia
1
-
-
... More
(c) 100 mm dia
1
-
-
... More
(d) 150 mm dia
1
-
-
... More
(VI) Cowel of following sizes
-
-
-
... More
(a) 50 mm dia (weight without ear and socket 2.25 kg)
1
-
-
... More
(b) 80 mm dia (weight without ear and socket 3.25 kg)
1
-
-
... More
(c) 100 mm dia (weight without ear and socket 3.25 kg)
1
-
-
... More
(d) 150 mm dia -do-
1
-
-
... More
(VII) 100 mm dia "P" trap (wt without ear and socket)8.5 kg
1
-
-
... More
(VIII) 100 mm dia "P" trap (wt without ear and socket)8.8 kg
1
-
-
... More
(IX) 100 mm x 80 mm floor trap (weight without ear and socket) 4.00 kg
1
-
-
... More
(X) Pass over 50 mm x 150 mm for 50 mm projection
1
-
-
... More
(XI) -Do- 100 mm x 150 mm for 100 mm projection
1
-
-
... More
(XII) Inverted Junction single 100 mm x 50 (weight without ear and socket) 9.0 kg
1
-
-
... More
(XIII) Inverted Junction double 100 mm x 50 mm x 50 mm
(weight without ear and socket) 12.0 kg
1
-
-
... More
(XIV) H.C.I. offset 80 mm projection of the following Size
-
-
-
... More
(a) 50 mm dia (weight without ear and socket) 2.75 kg
1
-
-
... More
(b) 80 mm dia -do- 3.50 kg
1
-
-
... More
(c) 100 mm dia -do- 5.00 kg
1
-
-
... More
(d) 150 mm dia -do-
1
-
-
... More
(XV) H.C.I. Socket of following sizes
-
-
-
... More
(a) 50 mm dia (weight without ear) 1.50 kg
1
-
-
... More
(b) 80 mm dia (weight without ear) 3.00 kg
1
-
-
... More
(c) 100 mm dia (weight without ear) 4.50 kg
1
-
-
... More
(d) 150 mm dia (weight without ear) -do-
1
-
-
... More
C.I. Cover with frame for manhole and inspection chamber.
(M947)
-
-
-
... More
(a) 600 mm x 450 mm size (wt. 39 kg)
1
-
-
... More
(b) 600 mm x 450 mm size (wt. 25 kg)
1
-
-
... More
(c) 500 mm x 450 mm size (wt. 25 kg)
1
-
-
... More
C.I. Bracket pair for W.H.B. (M948)
-
-
-
... More
(a) 550 mm x 400 mm size (22" x 16")
1
-
-
... More
(b) -do- for 12.5 liter cistern
1
-
-
... More
(c) -do- for 600 mm x 450 mm (24" x 18") sink
1
-
-
... More
(d) 40 mm x 60 mm MS Plate bracket for sink as above
1
-
-
... More
(a) 32 mm (1 1/4") C.P. Brass waste for W.H.B (M949)
1
-
-
... More
(b) 40 mm (1 1/2") C.P. Brass waste for W.H.B for sink
1
-
-
... More
(c) 32 mm (1 1/4") C.P. waste of white metal
1
-
-
... More
(d) 40 mm (1 1/2") C.P. waste of white metal
1
-
-
... More
(a) 32 mm (1 1/4") P.V.C. waste pipe 750 mm long (2'6" long) with brass Union for W H B (M950)
1
-
-
... More
(b) 40 mm (1 1/2") P.V.C. waste pipe 750 mm long (2'6" long) with brass Union for W H B
1
-
-
... More
32 mm (1 1/4") P.V.C. telescopic flush pipe with brass union for high level cistern (M951)
1
-
-
... More
Rubber Inserttion 3 mm (1/8") thick (M952)
1
-
-
... More
Pig Lead
(M953)
1
-
-
... More
Yarn
(M954)
1
-
-
... More
Rubber Gasket for C.I pipe of Good quality (M955)
-
-
-
... More
(a) 80 mm
1
-
-
... More
(b)100 mm
1
-
-
... More
(c)125 mm
1
-
-
... More
(d)150 mm
1
-
-
... More
(e)200 mm
1
-
-
... More
(f)250 mm
1
-
-
... More
(g)300 mm
1
-
-
... More
(h)350 mm
1
-
-
... More
(i)400 mm
1
-
-
... More
(j)450 mm
1
-
-
... More
(k)500 mm
1
-
-
... More
(l)600 mm
1
-
-
... More
(m)700 mm
1
-
-
... More
(n)750 mm
1
-
-
... More
(o)800 mm
1
-
-
... More
(p)900 mm
1
-
-
... More
(q)1000 mm
1
-
-
... More
(r)1200 mm
1
-
-
... More
Cotton waste
(M956)
1
-
-
... More
Asbestos Suta (gland packing)
(M957)
1
-
-
... More
Solvent Cement
(M958)
1
-
-
... More
Hydrocloric acid (Sepecific gravity 1.20)
(M959)
1
-
-
... More
CP & PVC Fitting (M960)
-
-
-
... More
(i)32 mm dia C.P. Waste
1
-
-
... More
(ii)32 mm dia PV C waste pipe 750 mm long with coupling
1
-
-
... More
(iii)40 mm dia C.P. waste
1
-
-
... More
(iv 40 mm dia PVC waste pipe 750 mm long with coupling
1
-
-
... More
(v 100 mm dia steel jali
1
-
-
... More
(vi)15 mm dia C.P. nipple with coupling (short pieces)
1
-
-
... More
(vii)50 mm dia PVC pipe with coupling
1
-
-
... More
Special type of C.P. Bath room fittings for V.I.P. buildings(JAL, Jaquar, Marc or equivalent mark)
(M961)
-
-
-
... More
(i) Pillar Cock (ISI)
1
-
-
... More
(ii) Pillar Cock (Long neck)
1
-
-
... More
(iii) Bib Cock (ISI)
1
-
-
... More
(iv) Bib Cock (Long Thread)
1
-
-
... More
(v) Angular Stop Cock
1
-
-
... More
(vi) Angular Stop Cock (Long Thread)
1
-
-
... More
(vii) Concealed stop cock reduce (ISI)
1
-
-
... More
(viii) Concealed stop Cock heavy-duty extra adjustable wall flange
1
-
-
... More
(ix) Long Body Bib Cock
1
-
-
... More
(x) Swan Neck Tap with left hand Operating Knob
1
-
-
... More
(xi) Central hole basin mixer (Best Quality)
1
-
-
... More
(xii) Wall mixer with telephonic shower arrangement
1
-
-
... More
(xiii) Wall mixer with provision for over head shower with elbow coupling and well flange
1
-
-
... More
(xiv) Wall mixer 3 in 1 system with provision for over head shower with elbow coupling and wall flange
1
-
-
... More
(xv) Sink mixer with swinging casted spout
1
-
-
... More
(xvi) Sink Cock with swinging casted spout
1
-
-
... More
(xvii) 4 - way diverter for concealed fittings
1
-
-
... More
(xviii) Pressure adjustable shower with revolving joint
1
-
-
... More
(xix) Telephone shower with flexible pipe
1
-
-
... More
(xx) Flush Cock with wall flange (25 mm)
1
-
-
... More
(xxi) Towel Rail 24"
1
-
-
... More
(xxii) Towel Ring
1
-
-
... More
(xxiii) Soap dish
1
-
-
... More
(xxiv) Tumbler Holder
1
-
-
... More
(xxv) Toilet Paper Holder
1
-
-
... More
(xxvi) Glass Shelf 22"
1
-
-
... More
(xxvii) Corner glass shelf with bracket
1
-
-
... More
(xxviii) Flush Valve complete with 32 mm size control cock & flange
1
-
-
... More
C.I Special & PVC Pipes (M962)
-
-
-
... More
1. C.I double shocketted fittings bend such as bend, tee, taper,
-
-
-
... More
(a) 80-200 mm
1
-
-
... More
(b) 250-700 mm
1
-
-
... More
(c) 700-1000 mm
1
-
-
... More
2. C.I double flange fittings such as tee, taper, tailpiece, bend etc
-
-
-
... More
(a) 80-200 mm
1
-
-
... More
(b) 250-700 mm
1
-
-
... More
(c) 700-1000 mm
1
-
-
... More
Spare parts of Hand Pump
-
-
-
... More
Hexagonal Bolt M12x1.75x40mm long common to Marks II & III (M963)
1
-
-
... More
Hexagonal Nut M12x1.75mm
(M964)
1
-
-
... More
Washer M12 (2.5mm thick)
(M965)
1
-
-
... More
High tensile bolt M10x1.5x40mm long.
(M966)
1
-
-
... More
Nyloc Nut M10x1.5mm
(M967)
1
-
-
... More
Handle Axle (Stainless Steel)
(M968)
1
-
-
... More
Washer for Handle Axle (4mm thick)
(M969)
1
-
-
... More
Ball Bearing 6204 Z
(M970)
1
-
-
... More
Spacer for Handle.
(M971)
1
-
-
... More
Chain with coupling.
(M972)
1
-
-
... More
Hexagonal Bolt for front Cover M12x1.75mm long.
(M973)
1
-
-
... More
Nitrile Rubber cup washer for Mark – II & III (M974)
1
-
-
... More
Nitrile Sealing ring Mark – II (M975)
1
-
-
... More
Nitrile Rubber Seating Big for Lower valve Mark-II (M976)
1
-
-
... More
Nitrile Rubber Seating Small for Upper valve Mark-II.
(M977)
1
-
-
... More
Hexagonal rod coupling M12x1.75x50mm long.
(M978)
1
-
-
... More
Pump Head Assembly (G.I.) with front cover, Bolt & third plate.
(M979)
1
-
-
... More
Front cover (G.I.)
(M980)
1
-
-
... More
Handle Assembly (G.I.)
(M981)
1
-
-
... More
(a) Water Tank Assembly for Mark – II (G.I.)
(M982)
1
-
-
... More
(b) Water Tank Assembly for Mark – III (VLOM-65)
1
-
-
... More
Stand Assembly (G.I.) Normal.
(M983)
1
-
-
... More
Stand Assembly (Telescopic) (G.I).
(M984)
1
-
-
... More
Connecting Rod 3mtr. Long with coupling and nut (Electrogalvanized)
(M985)
1
-
-
... More
a) Cylinder Assembly complete set for Mark-II
(M986)
1
-
-
... More
b) Cylinder Assembly complete set for Mark-III (VLOM-65)
1
-
-
... More
a) Upper valve Assembly complete set for India Mark-II
(M987)
1
-
-
... More
b) Upper valve Assembly complete set for India Mark-III (VLOM-65)
1
-
-
... More
a) Lower valve Assembly complete set for India Mark-II
(M988)
1
-
-
... More
b) Lower valve Assembly complete set for IM-III
1
-
-
... More
Reducer Cap for Cylinder Mark-II (M989)
1
-
-
... More
a) Plunger Rod (S.S.) for Mark – II (M990)
1
-
-
... More
b) Plunger Rod (S.S.) for Mark – III
1
-
-
... More
Upper valve Guide (G.M.).
(M991)
1
-
-
... More
Rubber Seat Retainer for Mark-II
(M992)
1
-
-
... More
Third Plate for Head Assembly (Galanized)
(M993)
1
-
-
... More
Cylinder Body with brass liner for IM-II with reducer cap for Top and Bottom.
(M994)
1
-
-
... More
Gun Metal Spacer.
(M995)
1
-
-
... More
Check valve Guide Mark-II
(M996)
1
-
-
... More
a) Check Valve Seat for Mark – II (M997)
1
-
-
... More
b) Check Valve Seat for Mark – III
1
-
-
... More
Nitrile Rubber “O” ring (VLOM-65)
(M998)
1
-
-
... More
Push Rod for Mark – III (S.S).
(M999)
1
-
-
... More
Check Nut for Push Rod (S.S.). (M1000)
1
-
-
... More
Nitrile Rubber Cup Washer for VLOM-50
(M1001)
1
-
-
... More
Nitrile Rubber Sealing Ring for Mark – III VLOM-65
(M1002)
1
-
-
... More
Nitrile Rubber Seating Big for Lower Valve MK-II (M1003)
1
-
-
... More
Nitrile Rubber Seating Big for Lower Valve M-III VLOM-65)
(M1004)
1
-
-
... More
Nitrile Rubber Bobbin VLOM-50
(M1005)
1
-
-
... More
Nitrile Rubber “O” Ring VLOM-50
(M1006)
1
-
-
... More
Nitrile Rubber cone for VLOM-50
(M1007)
1
-
-
... More
Nitrile Rubber cone for VLOM-65
(M1008)
1
-
-
... More
Nitrile Rubber Centralizer 150mm for (VLOM-65).
(M1009)
1
-
-
... More
Nitrile Rubber Centralizer 125mm for (VLOM-65).
(M1010)
1
-
-
... More
Nitrile Rubber Centralizer 150mm for (VLOM-50).
(M1011)
1
-
-
... More
Nitrile Rubber Centralizer 125mm for VLOM-50
(M1012)
1
-
-
... More
Nitrile Rubber Centralizer 100mm for VLOM-50
(M1013)
1
-
-
... More
Water Tank Assembly Mark – III VLOM-50
(M1014)
1
-
-
... More
Cylinder Assembly Complete set for Mark – III (VLOM-50)
(M1015)
1
-
-
... More
Upper valve Assembly complete set for IM-III (VLOM-50)
(M1016)
1
-
-
... More
Lower valve Assembly complete set for IM-III (VLOM-50)
(M1017)
1
-
-
... More
a) Upper Cap Cylinder Mark – III (VLOM-65) (M1018)
1
-
-
... More
b) Upper Cap Cylinder Mark – III (VLOM-50)
1
-
-
... More
a) Bottom Cap for Mark – III (VLOM-50)
(M1019)
1
-
-
... More
b) Bottom Cap for Mark – III (VLOM-65)
1
-
-
... More
Follower for IM-III (M1020)
1
-
-
... More
Cage for Mark-III
(M1021)
1
-
-
... More
S.S. Hexagonal Bolt M-6x25mm long.
(M1022)
1
-
-
... More
Basic rate of standard I.S.I. mark Deep Well Hand Pump for India mark-2, I.S.I. 15500 (Part 2) / 2004 with latest revision including 12mm x 3meter long 8 no. Connecting Rods made of bright bar electro-galvanized fitted with coupler & normal stand assembly ecommended for use with cylinder assembly suitable for bore well dia 100 to 125mm casing pipe.
(M1023)
1
-
-
... More
Basic rate of UPVC pipe 125mm dia conforming to I.S.I. latest revision is 12818/2016 CML No. 5543459
(M1024)
1
-
-
... More
Basic rate of 32mm G.I. pipe in 3 mtrs. Length (medium) with seamless socket as per relevent B.I.S. specification IS 1239(PART-I)/2004
(M1025)
1
-
-
... More
DI Pipe : Providing and Supplying ISI mark Centrifugally cat (Spun) Ductile Iron Pipes of 100 mm and above all diameter for water works with socket & spigot ends confirming to IS 8329/2000 in the standard working lengths of 4.5, 5.5 & 6 m suitable for classification K-7 & K-9 suitable for push-on-joint (rubber gusket D jointing) with cement mortar lining inside the pipes with outside zinc and bittuminous coating. Rates are ex factory excluding transpotion, taxes & duties, Contractor profit & overhead charges etc.Based on WPI 100.3 of May 2020(Including cost of one no. gasket for each pipe)
(M1026)
-
-
-
... More
Note :(i)The rates are exfactory but exclusive of GST & C.P. based on WPI 100.3 of May 2020. (ii) Price variation of DI pipe will be calculated based on prevalling WPI.
-
-
-
... More
Size
-
-
-
... More
100 mm dia
1
-
-
... More
150 mm dia
1
-
-
... More
200 mm dia
1
-
-
... More
250 mm dia
1
-
-
... More
300 mm dia
1
-
-
... More
350 mm dia
1
-
-
... More
400 mm dia
1
-
-
... More
450 mm dia
1
-
-
... More
500 mm dia
1
-
-
... More
600 mm dia
1
-
-
... More
700 mm dia
1
-
-
... More
750 mm dia
1
-
-
... More
800 mm dia
1
-
-
... More
900 mm dia
1
-
-
... More
1000 mm dia
1
-
-
... More
1100 mm dia
1
-
-
... More
1200 mm dia
1
-
-
... More
Size
-
-
-
... More
100 mm dia
1
-
-
... More
150 mm dia
1
-
-
... More
200 mm dia
1
-
-
... More
250 mm dia
1
-
-
... More
300 mm dia
1
-
-
... More
350 mm dia
1
-
-
... More
400 mm dia
1
-
-
... More
450 mm dia
1
-
-
... More
500 mm dia
1
-
-
... More
600 mm dia
1
-
-
... More
700 mm dia
1
-
-
... More
750 mm dia
1
-
-
... More
800 mm dia
1
-
-
... More
900 mm dia
1
-
-
... More
1000 mm dia
1
-
-
... More
1100 mm dia
1
-
-
... More
1200 mm dia
1
-
-
... More
Providing and Supplying of ISI standard DI specials & fitting with sealing rubber gasket of SBR, complete with cast Iron follower gland & MS nut bolts coated or otherwise protected from rusting and suitable for DI pipescomplete as per IS-9523 class K-12 ( ex factory rates ) inspection charge transportation ,CP extra.
(M1027)
-
-
-
... More
Socketed
-
-
-
... More
100 -150 mm dia
1
-
-
... More
200-300 mm dia
1
-
-
... More
350-450 mm dia
1
-
-
... More
500-600 mm dia
1
-
-
... More
700 mm dia
1
-
-
... More
800 mm dia
1
-
-
... More
900 mm dia
1
-
-
... More
1000 mm dia
1
-
-
... More
1100 mm dia
1
-
-
... More
1200 mm dia
1
-
-
... More
Flanged
-
-
-
... More
100 -150 mm dia
1
-
-
... More
200-300 mm dia
1
-
-
... More
350-450 mm dia
1
-
-
... More
500-600 mm dia
1
-
-
... More
700 mm dia
1
-
-
... More
800 mm dia
1
-
-
... More
900 mm dia
1
-
-
... More
1000 mm dia
1
-
-
... More
1100 mm dia
1
-
-
... More
1200 mm dia
1
-
-
... More
Providing and supplying in standard lengths High Density Polyethylene Pipe (HDPE Pipe) confirming to IS 4984-4984/14151/12786/13488 (Latest Revision with necessary jointing materials like mechanical connector i.e. thread/insert joint/quick release coupler joint/compression fitting joint or flanged joints excluding coupler/specials and taxes). (M1028)
-
-
-
... More
HDPE pipe of materials grade PE80-PN06 (dia in mm)
-
-
-
... More
25 mm dia
1
-
-
... More
32 mm dia
1
-
-
... More
40 mm dia
1
-
-
... More
50 mm dia
1
-
-
... More
63 mm dia
1
-
-
... More
75 mm dia
1
-
-
... More
90 mm dia
1
-
-
... More
110 mm dia
1
-
-
... More
125 mm dia
1
-
-
... More
140 mm dia
1
-
-
... More
160 mm dia
1
-
-
... More
180 mm dia
1
-
-
... More
200 mm dia
1
-
-
... More
225 mm dia
1
-
-
... More
250 mm dia
1
-
-
... More
280 mm dia
1
-
-
... More
315 mm dia
1
-
-
... More
355 mm dia
1
-
-
... More
400 mm dia
1
-
-
... More
450 mm dia
1
-
-
... More
500 mm dia
1
-
-
... More
HDPE pipe of materials grade PE80-PN10 (dia in mm)
-
-
-
... More
25 mm dia
1
-
-
... More
32 mm dia
1
-
-
... More
40 mm dia
1
-
-
... More
50 mm dia
1
-
-
... More
63 mm dia
1
-
-
... More
75 mm dia
1
-
-
... More
90 mm dia
1
-
-
... More
110 mm dia
1
-
-
... More
125 mm dia
1
-
-
... More
140 mm dia
1
-
-
... More
160 mm dia
1
-
-
... More
180 mm dia
1
-
-
... More
200 mm dia
1
-
-
... More
225 mm dia
1
-
-
... More
250 mm dia
1
-
-
... More
280 mm dia
1
-
-
... More
315 mm dia
1
-
-
... More
355 mm dia
1
-
-
... More
400 mm dia
1
-
-
... More
450 mm dia
1
-
-
... More
500 mm dia
1
-
-
... More
Providing and supplying in standard lengths High Density Polyethylene Pipe (HDPE Pipe) 25mm to 500mm dia confirming to IS 4984-4984/14151/12786/13488 (Latest Revision with necessary jointing materials like mechanical connector i.e. thread/insert joint/quick release coupler joint/compression fitting joint or flanged joints excluding coupler/specials and taxes. (M1029)
-
-
-
... More
HDPE pipe of materials grade PE100-PN06 (dia in mm)
-
-
-
... More
25 mm dia
1
-
-
... More
32 mm dia
1
-
-
... More
40 mm dia
1
-
-
... More
50 mm dia
1
-
-
... More
63 mm dia
1
-
-
... More
75 mm dia
1
-
-
... More
90 mm dia
1
-
-
... More
110 mm dia
1
-
-
... More
125 mm dia
1
-
-
... More
140 mm dia
1
-
-
... More
160 mm dia
1
-
-
... More
180 mm dia
1
-
-
... More
200 mm dia
1
-
-
... More
225 mm dia
1
-
-
... More
250 mm dia
1
-
-
... More
280 mm dia
1
-
-
... More
315 mm dia
1
-
-
... More
355 mm dia
1
-
-
... More
400 mm dia
1
-
-
... More
450 mm dia
1
-
-
... More
500 mm dia
1
-
-
... More
HDPE pipe of materials grade PE100-PN10 (dia in mm)
-
-
-
... More
25 mm dia
1
-
-
... More
32 mm dia
1
-
-
... More
40 mm dia
1
-
-
... More
50 mm dia
1
-
-
... More
63 mm dia
1
-
-
... More
75 mm dia
1
-
-
... More
90 mm dia
1
-
-
... More
110 mm dia
1
-
-
... More
125 mm dia
1
-
-
... More
140 mm dia
1
-
-
... More
160 mm dia
1
-
-
... More
180 mm dia
1
-
-
... More
200 mm dia
1
-
-
... More
225 mm dia
1
-
-
... More
250 mm dia
1
-
-
... More
280 mm dia
1
-
-
... More
315 mm dia
1
-
-
... More
355 mm dia
1
-
-
... More
400 mm dia
1
-
-
... More
450 mm dia
1
-
-
... More
500 mm dia
1
-
-
... More
RCC ESR (M1030)
-
-
-
... More
Designing (aesthetically), and constructing RCC elevated service reservoirs of following capacity with RCC staging Consisting of columns, internal and External bracings spaced vertically not More than 4.5 metres centre to centre for ESR having capacity upto 500 cum and Not more than 6m c/c for ESR having Capacity above 500 Cum including Excavation in all types of strata, foundation concrete, cement plaster with water proofing compound to the in side and out side face of the container and also plaster with plastic paint in all Columns and Bracings including refilling disposing off the surplus stuff with in a lead of 50 metres, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design, providing and fixing accessories such as M.S. ladder out side, Stainless Steel lader in contenor, C.I. manhole frame and covers, water level indicators,lightening conductor, G.I. pipe railing around walk way and top slab, providing stair case from ground level to roof level, M.S. Grill gate of 2M height with locking arrangement of approved design, B.B. Masonry chambers for all valves, ventilating shafts, providing and applying three coats of Acrylie emulsion with silicon edditives paint to the structure incluing roof slab, epoxy painting to internal surface and anti-termite treatment for under ground part soft he structure and giving satisfactory water tightness test as per I.S. code. The job to include painting then ame of the scheme and other details on the reservoir as per the directions of Engineer In - Charge.
-
-
-
... More
Notes
-
-
-
... More
The design of the structure be in accordance with relevant I.S. specification (I.S. 3370 - 1965 or revised.)
-
-
-
... More
The design shall satisfy the stipulations as per I.S. 1893 -1984 and I.S.13920/1993 for seismic force and I.S.-11682 / 1985 for R.C.C. staging of over head tanks.
-
-
-
... More
For design having more than 6 columns, suitable bracing is obligatory.
-
-
-
... More
Plain round mild steel bars grade- I conforming to I.S.432 part-I orhigh yield strength deformed bars conforming to I.S. 1786 or I.S. 1139 shall beused, grade- I Imild steel bars will not be allowed
-
-
-
... More
Irrespective of the type of foundation proposed in the design, one set of bracing be provided at the ground level.
-
-
-
... More
These rates include providing M.S. ladder for E.S.R.s upto 2 lakh litres capacity and providing spiral stair case for E.S.R. above 2 lakh litres capacity.
-
-
-
... More
Staging shall have to bede signed with stresses of M-200 concrete for ESR. However all RCC construction should be donein M-250. Structures in contact with water shall be designed & casted in M-300
-
-
-
... More
These rates are including the cost of up lift pressure if any and entire dewatering during execution. Incase of water logging are a where water is struck at shallow depth, extra provision of dewatering shall be made as per site condition.
-
-
-
... More
All conditions given in the Member Secretary's Circular No. MJP / TS-I / 350 / 1668 dt. 2-8-97 and MJP / S-I / 350 / 2127 dt. 13-7-99 shall be strictly followed and additional cost, if any, due to these conditions is included in the rates mentioned below.
-
-
-
... More
75 % part rate shall be payable for reinforcement concrete and plastering items of containers of E.S.R. till satisfactory hydraulic testing for water tightness is given; and till that work shall be treated as incomplete.
-
-
-
... More
The rates indicated in the table are excluding the cost of pipes, specials and valves required for inlet, outlet, washout, overflow and bypass arrangement. The scope of work, however, includes cost of erecting, laying and jointing of pipe and valves including cost of jointing materials upto 5 M beyond outer face of outer most column ( Cost of pipe, specials and valves is taken as 10% of the cost of ESR as per table).
-
-
-
... More
For ESR upto 500 cum capacity C.I. double flanged pipes upto 300 mm dia shall be provided and C.I. specials shall be used. For ESR above 500 cum capacity C.I. / M.S. pipe assembly with minimum 8 mm thickness upto 500 mm dia and minimum 10 mm thickness above 500 mm dia can be used with proper anti-corrosive epoxy treatment from in side and out side.
-
-
-
... More
Below mentioned rates are for foundation swith individual footing with bearing capacity of 20 tonnes per square metre. For raft foundations, these rates shall be increased by 7.5% where safe bearing capacity (SBC) is 5 MT per sqm and by 5 % where SBC is more than 5MT / sqm and upto 10 MT / sqm. This % of 5 % or 7. 5 % is applicable for estimation of amount of lumpsum item of ESR. For extra item due to change from individual foundation to raft, actual increase in concrete and steel be paid as per relevant DSR item.
-
-
-
... More
The rate shall be increased by 30 % for bearing piles upto depth of 10 M and for further increased in depth by 5 M each, it shall be increased by another 10%. These rates are applicable where raft is not feasible. For pile foundations sulphate resistant cement shall only beused. Single pile for the column is not permitted, group of piles shall be designed with pile cap for each column of ESR.
-
-
-
... More
The rates are applicable for staging height of 12 M. These rates shall be increased or decreased for per metre variation in this staging height as below :
-
-
-
... More
12 to 16 M staging - 2% per metre
-
-
-
... More
16 to 20 M staging - 3% per metre
-
-
-
... More
20 M and above - 4% per metre
-
-
-
... More
For 17 M staging height, percentage calculation will be like below :
-
-
-
... More
12 to 16 M --- 4 x 2 = 8%
-
-
-
... More
16 & 17 M --- 1 x 3% = 3% Total = 11%
-
-
-
... More
For 21 M staging height, percentage calculation will be like below :
-
-
-
... More
12 to 16 M --- 4 x 2 = 8%
-
-
-
... More
16 to 20 M --- 4 x 3% = 12%
-
-
-
... More
20& 21 M --- 1 x 4% = 4% Total = 24%
-
-
-
... More
Following rates are for seismic zone III. For zone IV, these rates shall be increased by 5% and for zone II, these rates shall be decreased by 5%. Concerned Executive Engineer shall confirm the seismic zone for the scheme from seismic zone splan before estimation and adopt appropriate rates as per actual seismic zones. (Seismic maps attached in this CSR).
-
-
-
... More
Notes
-
-
-
... More
Conditions from Sr.No.1 to 10 shall form a part and parcel of the tender and must be included in the draft tender papers for works of R.C.C. E.S.R.
-
-
-
... More
Conditions from Sr.No.11 to 16 are for estimation purpose only and shall not appear in the tender.
-
-
-
... More
Rates for RCC ESRs
-
-
-
... More
Upto 25,000 litres
1
-
-
... More
Cost of 25,000 litres capacity
1
-
-
... More
Add for capacity above 25,000 upto 50,000 litres
1
-
-
... More
Cost of 50,000 litres capacity
1
-
-
... More
Add for capacity above 50,000 upto 75,000 litres
1
-
-
... More
Cost of 75,000 litres capacity
1
-
-
... More
Add for capacity above 75,000 upto 1,00,000 litres
1
-
-
... More
Cost of 1,00,000 litres capacity
1
-
-
... More
Add for capacity above 1,00,000 upto 1,50,000 litres
1
-
-
... More
Cost of 1,50,000 litres capacity
1
-
-
... More
Add for capacity above 1,50,000 upto 2,00,000 litres
1
-
-
... More
Cost of 2,00,000 litres capacity
1
-
-
... More
Add for capacity above 2,00,000 upto 2,50,000 litres
1
-
-
... More
Cost of 2,50,000 litres capacity
1
-
-
... More
Add for capacity above 2,50,000 upto 3,00,000 litres
1
-
-
... More
Cost of 3,00,000 litres capacity
1
-
-
... More
Add for capacity above 3,00,000 upto 4,00,000 litres
1
-
-
... More
Cost of 4,00,000 litres capacity
1
-
-
... More
Add for capacity above 4,00,000 upto 5,00,000 litres
1
-
-
... More
Cost of 5,00,000 litres capacity
1
-
-
... More
Add for capacity above 5,00,000 upto 7,50,000 litres
1
-
-
... More
Cost of 7,50,000 litres capacity
1
-
-
... More
Add for capacity above 7,50,000 upto 10,00,000 litres
1
-
-
... More
Cost of 10,00,000 litres capacity
1
-
-
... More
Add for capacity above 10,00,000 upto 15,00,000 litres
1
-
-
... More
Cost of 15,00,000 litres capacity
1
-
-
... More
Add for capacity above 15,00,000 upto 20,00,000 litres
1
-
-
... More
Cost of 20,00,000 litres capacity
1
-
-
... More
RCC GSR AND SUMP (M1031)
-
-
-
... More
Designing (aesthetically), and constructing RCC ground service reservoirs / RCC sumps in M-300 mix. of required capacity including excavation in all types of strata, foundation concrete, container walls, bottom slab top RCC roof slab / or dome, 20 mm thick cement plaster with water proofing compound in CM 1:3 proportion. to inside face of the container,including epoxy paint from inside including refilling and disposing of surplus stuff within lead of 50 M, all labour and material charges, for laying and jointing of pipe assembly for inlet, outlet washout, over flow and bye-pass arrangement consisting of C.I./ M.S. D/F. pipes, specials and valves of given diameters, providing and fixing accessories such as M.S. ladder inside and outside, C.I. Manhole frame and cover, water top slab, B.B. masonry chamber for all valves, ventilating shafts, including giving satisfactory hydraulic test and water tightness test as per IS code and providing three coat of cement paints to all expose surface of structure including roof surface etc. complete as per design data, criteria, obligatory requirements and detailed specifications.
-
-
-
... More
Anti –termite treatment shall be given for under ground portion of the structure.
-
-
-
... More
Notes
-
-
-
... More
The design shall be in accordance with various relevant I.S. specification (I.S.456/2000,I.S.875-1987,I.S.3370-1965 or revised.)
-
-
-
... More
Only M.S. bars grade I conforming to I.S. 432 part-I or high yield strength deformed bars conforming to I.S. 1786 or I.S.1139 shall be used.Grade- II M.S. bars shall not be used.
-
-
-
... More
Entire structure shall be in M-300 only.
-
-
-
... More
The scope of pipe assembly work shall be upto 5 metre beyond out side face of the wall, cost of pipes valves and specials is not included in the rate but labour cost for laying and jointing is included.
-
-
-
... More
The G.S.R. / Sump above 15 lakh litres capacity shall be in two compartment.
-
-
-
... More
The Job includes designing the structure for up lift pressure and dewatering if required during entire execution and disposal of surplus excavated stuff within lead of 50 metres as directed by Engineer-in-charge. If up lifts considered in design, then these rates shall be increased by 7.5%.
-
-
-
... More
G.S.R. outlets shall be with bell mouth of approved pattern in bottom slab and cost of designing bell mouth is included in the rate. Sump well includes cost of suction pit required at bottom.
-
-
-
... More
For pipe diameters upto 300mm only CIpipes and CI specials shall be used. For pipe diameters above 300mm, M.S. pipes and specials minimum 10mm thick shall be used with proper anti corrosive epoxy treatment from inside and outside.
-
-
-
... More
Cost of pump house is not included in these rates.
-
-
-
... More
Above rates are applicable for Seismic Zones 2, 3 and 4.
-
-
-
... More
75% part rate shall be payable for reinforcement, concrete and plastering items of all types of G.S.R. sand sump still satisfactory hydraulic testing for water tightness test is given and till that work shall be treated as incomplete.
-
-
-
... More
10% shall be added for sump if over head pump house is proposed.
-
-
-
... More
Note: Conditions from Sr.No.1 to 11 shall form a part and parcel of tender and must be included in the draft tender papers for work of R.C.C .GSRs and sumps.
-
-
-
... More
Rates for RCC GSRs and Sumps
-
-
-
... More
Upto 25,000 litres
1
-
-
... More
Cost of 25,000 litres capacity
1
-
-
... More
Add for capacity above 25,000 upto 50,000 litres
1
-
-
... More
Cost of 50,000 litres capacity
1
-
-
... More
Add for capacity above 50,000 upto 75,000 litres
1
-
-
... More
Cost of 75,000 litres capacity
1
-
-
... More
Add for capacity above 75,000 upto 1,00,000 litres
1
-
-
... More
Cost of 1,00,000 litres capacity
1
-
-
... More
Add for capacity above 1,00,000 upto 1,50,000 litres
1
-
-
... More
Cost of 1,50,000 litres capacity
1
-
-
... More
Add for capacity above 1,50,000 upto 2,00,000 litres
1
-
-
... More
Cost of 2,00,000 litres capacity
1
-
-
... More
Add for capacity above 2,00,000 upto 3,00,000 litres
1
-
-
... More
Cost of 3,00,000 litres capacity
1
-
-
... More
Add for capacity above 3,00,000 upto 5,00,000 litres
1
-
-
... More
Cost of 5,00,000 litres capacity
1
-
-
... More
Add for capacity above 5,00,000 upto 10,00,000 litres
1
-
-
... More
Cost of 10,00,000 litres capacity
1
-
-
... More
Addforcapacityabove10,00,000upto15,00,000 litres
1
-
-
... More
Cost of 15,00,000 litres capacity
1
-
-
... More
Add for capacity above 15,00,000 litres
1
-
-
... More
Note: 10% shall be added over the cost of GSR for sump where over head pump house is proposed.
-
-
-
... More
Unconventional Water Treatment Plant (M1032)
-
-
-
... More
Designing (aesthetically), providing and constructing high rate Unconventional Water Treatment Plant i.e. Simplified Water Treatment Plant consisting of Civil works including cost of providing and applying epoxy paint to inside surface of water retaining structures in contact with chlorine and providing anti-termite treatment to entire structure below ground level, ceramic tiles for floring, Acrylic emulsion with silicon additives paint from outside stainless steel railing, mechanical and electrical components of various sub-works as given below : including necessary hydraulic testing, structural testing and trial for 3 months, etc. complete as directed by Engineer-in-charge (turn-key job) works.
-
-
-
... More
Aeration fountain
-
-
-
... More
Inlet arrangements
-
-
-
... More
Mixing channel with ventury flume and flow measuring arrangement
-
-
-
... More
Inlet channel
-
-
-
... More
Flocculator- Conforming to I.S. 7208-1974 (Type-C) with detention period of 30 minutes
-
-
-
... More
Tube settlers-Designing, fabricating and constructing Tube Settlers with square or any other shaped tube like Circular, Cheveron, Hexagonal etc .having proven performance
-
-
-
... More
Rapid sand gravity filters - All valve shall be glandless.
-
-
-
... More
Filter house
-
-
-
... More
Chemical house
-
-
-
... More
Alum tanks- 2Nos. with mixing, carrying and dosing arrangements with piping.
-
-
-
... More
100 kg chlorine cylender for capacity upto 5MLD and Chlorine tonner for capacity above 5 MLD.
-
-
-
... More
TCL solution tank with mixing, carrying and dosing arrangement with piping.
-
-
-
... More
Bypass arrangement
-
-
-
... More
External and internal electrification
-
-
-
... More
Laboratory equipments
-
-
-
... More
Wash water tanks of capacity equal to12 minutes to wash specified number of filter beds at time at 600 lit / m2/m under head of 12m at under drain.
-
-
-
... More
Wash water pumps with 100% standby
-
-
-
... More
Air blowers capable of delivering 600 LMP per square metre of free air of filter area at 0.4 Kg / sqcm at the under drains (100 % standby). Air blowers shall be adopted for WTP having capacity more than 3 MLD only. Below 3 MLD capacity, Air blowers shall not be adopted.
-
-
-
... More
Pure water sump of capacity equal to 1 hour pumping capacity.
-
-
-
... More
Pure water pump house over the sump / by the side of sump.
-
-
-
... More
Drainage arrangements
-
-
-
... More
Alum store
-
-
-
... More
Sanitary block with necessary water supply and drainage arrangements and internal WBM roads.
-
-
-
... More
These rates are applicable for seismic zones 2, 3 and 4.
-
-
-
... More
Rates given below are inclusive of uplift pressure if any and dewatering during the entire work.
-
-
-
... More
All RCC structures shall be constructed in M-250. Structures in contact with water shall be in M-300.
-
-
-
... More
Unconventional Treatment Plants less than 1 MLD capacity shall not be constructed.
-
-
-
... More
All the Structural Steel Works / Fabrications are to be provided with application of Hot Dip Zinc coating according to specification as per IS 4759:1996 (Reafirmed 2006).
-
-
-
... More
Note: Conditions from Sr. No. 1 to 28 shall form a part and parcel of the tender and must be included in draft tender papers for the work of unconventional treatment plants.
-
-
-
... More
Unconventional Water Treatment Plant
-
-
-
... More
Fixed cost for 1 MLD
1
-
-
... More
Add for capacity above 1 MLD upto 2 MLD
1
-
-
... More
Cost of 2 MLD treatment plant
1
-
-
... More
Add for capacity above 2 MLD upto 3 MLD
1
-
-
... More
Cost of 3 MLD treatment plant
1
-
-
... More
Conventional Water Treatment Plant (M1033)
-
-
-
... More
Designing (aesthetically), providing constructing and commissioning Conventional Water Treatment Plant consisting of all Civil, Mechanical and Electrical works including cost of providing and applying epoxy paint to inside surface of water retaining structures in contact with chlorine and providing antitermite treatment to entire structure below ground level, mechanical and electrical components of various sub-works as given below, including necessary hydraulic testing, structural testing, equipment testing and trial run for a period of 3 months, etc. complete as directed by Engineer-in-charge (turn-key job).
-
-
-
... More
Aeration Fountain- Plan are a not less than 0.625 square metre per MLD
-
-
-
... More
Ventury Flume - With necessary devices, consisting of simple mechanical indicator. (Pedestal type gauge)
-
-
-
... More
Flash Mixer-Rapid mixing device, detention time 60 seconds to give velocity gradient 300 to 400 sec -1, vane mixer type conforming to I.S. 7090 of 1985.
-
-
-
... More
Flocculator – Conforming to I.S.7208-1974 (Type-C) with detention period of 30 minutes.
-
-
-
... More
Clarifier - Horizontal flow circular tank, detention period 2-5 hours, overflow rate 30 cubic metre per square metre per day (to be specified), Weir loading not more than 300 cubic metre per metre per day, with mechanical sludge scraper conforming to I.S. No. 10313-1982.
-
-
-
... More
Rapid Sand Filter sand Filter House-Filter designed for filteration rate of 5,000 litres per square metre per hour, minimum 2 beds for plant upto 10 MLD, for larger plants as specified, filters to be located in filter house with roof slab, pipe gallery and platform minimum 5.5 metre in width.
-
-
-
... More
FilterSand-Effective size 0.45 to 0.70mm, uniformity coefficient not more than 1.7, nor less than 1.3, depth of water over sand 0.75M, free board 50cm, gravel 0.45M in depth, sand and gravel conforming to I.S. 8491 (i)-77, back wash by air wash, stand ard appurtenances (to be specified), rate of flow controller, filter gauge, sand expansion gauge, etc.
-
-
-
... More
Wash Water Tank-Capacity to be specified and suitable to supply water to wash 2 filter units at a time where the units are 4 or more.
-
-
-
... More
Wash Water Pumps- Capacity to fill water tank in 1 hour with 100% standby.
-
-
-
... More
Air Blowers-Capable of delivering 600 LMP per square metre of free air, of filter area at 0.4kg / sqcm at the under drains (100% standby).
-
-
-
... More
Chemical House in Two Storeys
-
-
-
... More
Ground floor to accommodate 7 days' alum requirement and sundry storage.
-
-
-
... More
First floor to accommodate alum and lime tanks. etc.
-
-
-
... More
Solution tanks-Minimum 3 tanks (one for preparation, second for dosing and third as standby), each tank capable of giving 8 hours maximum dose without interruption, minimum free board 0.30M, trays for dissolving, level indicator, mechanical agitation devices, solution feed and drain lines, solution feed device (constant head device, strength of solution upto 10% only) conforming to I.S. 9222 Part-I 1979.
-
-
-
... More
Pure Water Sump and Sump House.
-
-
-
... More
Capacity of sump – One hour of designed flow.
-
-
-
... More
Pump House- Pump house of required size over the sump or by the side.
-
-
-
... More
Store House-Suitable for alum storage of three months' requirement in monsoon with 10% extra capacity for other sundry articles.
-
-
-
... More
Vacuum feed type Chlorinators- Make tobe approved by MJP.
-
-
-
... More
Conforming to I.S. 10533 - A Part-II 1983
-
-
-
... More
Rate for withdrawal
-
-
-
... More
Temperature Kg. of Chlorine discharge Degree 'C' per day (Cylinders)
-
-
-
... More
45 67 Tonnes
-
-
-
... More
10 6.35 9.50 110
-
-
-
... More
15 10.75 16.10 130
-
-
-
... More
20 14.50 21.24 254
-
-
-
... More
27&Above 18.70 28.12 315
-
-
-
... More
Chlorinator equipment and container room to conform to I.S. 10553 Part-I 1983.
-
-
-
... More
100% standby shall be provided.
-
-
-
... More
By pass arrangements - C.I. or M.S. pipes.
-
-
-
... More
Disposal of waste from WTP: Safe disposal arrangement to near by Nala including cost of pipe
-
-
-
... More
For WTP of Capacity 30 MLD and more additional arrangement for backwash water recycle shall be provided, including sump, pupming machinary,rising main etc complete
-
-
-
... More
Drainage arrangements – RCC pipes up to plot boundary.
-
-
-
... More
Electrical installation – Both internal and external including entire plant area.
-
-
-
... More
Laboratory equipment –As per requirement (to be specified during tendering).
-
-
-
... More
Sanitary blocks – Carpet area -15 square metre minimum upto 25 Mld and 25 square metre above 25 Mld.
-
-
-
... More
Administrative block and internal road-To accommodate office room, chlorine room, laboratory room, panel board room, blower room etc. and WBM road to connect all units from main gate of plot.
-
-
-
... More
Rates given below are inclusive of up lift pressure if any and dewatering during entire work.
-
-
-
... More
All pipes condutes channels with20%overloading
-
-
-
... More
These rates are applicable for seismic zones 2, 3 and 4.
-
-
-
... More
All RCC structures shall be constructed in M-300.
-
-
-
... More
Note: Conditions from Sr. No. 1 to 22 shall form a part and parcel of the tender and must be incorporated in draft tender papers of conventional treatment plants (proposed).
-
-
-
... More
Conventional Water Treatment Plant
-
-
-
... More
Above 3 MLD to Upto 5 MLD
1
-
-
... More
Cost of 5 MLD treatment plant
1
-
-
... More
Add for capacity above 5MLD upto 10 MLD
1
-
-
... More
Cost of 10 MLD treatment plant
1
-
-
... More
Add for capacity above 10 MLD upto 20 MLD
1
-
-
... More
Cost of 20 MLD treatment plant
1
-
-
... More
Add for capacity above 20 MLD upto 50 MLD
1
-
-
... More
Cost of 50 MLD treatment plant
1
-
-
... More
Add for capacity above 50 MLD upto 100 MLD
1
-
-
... More
Cost of 100 MLD treatment plant
1
-
-
... More
Add for capacity above 100 MLD
1
-
-
... More
GPT/HYGPT : Drilling by Rotary drill machine of size 300mm & 400mm dia with T.C. drill bit for tubewells in all kinds of soil including moorum, hard soil, soil mixed with pebbles, shingles, compacted soil, clay, soft and decomposed rock etc, up to 60 meters depth including reaming to facilitate smooth lowering of casing pipe etc. as per specification and direction of E/I (Basic rates)
(M1034)
-
-
-
... More
300 mm dia for GPT
1
-
-
... More
400 mm dia for HYGPT
1
-
-
... More
HYDT : Cost of drilling 200 mm x 165 mm x 125 meter deep bore well in all kinds of soil and rock in rural area for installation of pump set with Hydraulic DTH Rig machine, all complete including supplying all materials, tools, drilling rig, Air Compressor and equipments, as well as fuel, lubricants and cost of transportation of Rig machine and other vehicles up to the site (Basic rates)
(M1035)
-
-
-
... More
From 0-50 meter
1
-
-
... More
From 51-125 meter
1
-
-
... More
MS Pipe (M1036)
-
-
-
... More
Supplying all tools, tackles & lowering of 200 mm dia MS ERW casing pipe of 6mm wall thickness including welding charges, cost of pipe etc . all complete job (Basic rates)
1
-
-
... More
Supplying all materia;ls, labours, tools & equipments for fitting & fixing 200mm dia MS cap over casing pipe complete job (Basic rates)
1
-
-
... More
DT : Basic rates for 125/115 mm dia Drilled Tube-well for drilling in all kinds of soil and rock for installation of hand pump with DTH rig Machine all complete including supplying all materials, labours, tools, drilling, rigs, air compressor and equipments as well as fuel lubricant, for making 125/115 mm dia boring etc. and cost of transporting rig machine and other vehicle up to site of work as per specification and dirrection of Engineer Incharge (Basic rates)
(M1037)
-
-
-
... More
Drillig upto 30 mtr Depth below G. L. in Rural Area
1
-
-
... More
Drilling beyond 31 mtr upto 60 mtr below G. L. in Rural Area
1
-
-
... More
Trenchless (M1038)
-
-
-
... More
Installation of product pipe by manual pipe jacking method including making of entry and exit pits all related civil works like excavation ,shoring / strutting etc manual shielded excation ,lowering of pipe segments in the jacking pit laying and jointing of product pipeline through jacking process from the jacking pit and restoration of site after project completion as per the instruction of the engineering -in - charge all complete exept the cost of the pipe average cover of 1.5 depth below GI ( upto 100 meter installation length )
-
-
-
... More
from 900 mm to 1000 mm dia
-
-
-
... More
In Soft soil
1
-
-
... More
In Hard soil
1
-
-
... More
In sandy Soil
1
-
-
... More
In Stone Soil
1
-
-
... More
from 1000 mm to 1200 mm dia
-
-
-
... More
In Soft soil
1
-
-
... More
In Hard soil
1
-
-
... More
In sandy Soil
1
-
-
... More
In Stone Soil
1
-
-
... More
Above 1200 mm to 1500 mm dia
-
-
-
... More
In Soft soil
1
-
-
... More
In Hard soil
1
-
-
... More
In sandy Soil
1
-
-
... More
In Stone Soil
1
-
-
... More
Installation of product pipe by Auger Boring method including making of entry and exit pits all related civil works like excavation ,shoring /strutting etc shielded excavation ,through auger boring process lowering of pipe segments in the jacking pit laying and jointing of product pipeline through jacking process from the jacking pit and restoration of site after project completion as per the instruction of the engineering -in - charge all complete exept the cost of the pipe average cover of 1.5 depth below GI ( upto 100 meter installation length )
-
-
-
... More
upto 300 mm dia
-
-
-
... More
In Soft soil
1
-
-
... More
In Hard soil
1
-
-
... More
In sandy Soil
1
-
-
... More
In Stone Soil
1
-
-
... More
Above300 mm to 450 mm dia
-
-
-
... More
In Soft soil
1
-
-
... More
In Hard soil
1
-
-
... More
In sandy Soil
1
-
-
... More
In Stone Soil
1
-
-
... More
Above 450 mm to 600 mm dia
-
-
-
... More
In Soft soil
1
-
-
... More
In Hard soil
1
-
-
... More
In sandy Soil
1
-
-
... More
In Stone Soil
1
-
-
... More
Above 600 mm to 900 mm dia
-
-
-
... More
In Soft soil
1
-
-
... More
In Hard soil
1
-
-
... More
In sandy Soil
1
-
-
... More
In Stone Soil
1
-
-
... More
Installation of product pipe by Guided Auger Boring method including making of entry and exit pits all related civil works like excavation ,shoring /strutting etc shielded excavation ,through auger boring process lowering of pipe segments in the jacking pit laying and jointing of product pipeline through jacking process from the jacking pit and restoration of site after project completion as per the instruction of the engineering -in - charge all complete exept the cost of the pipe average cover of 1.5 depth below GI ( upto 100 meter installation length )
-
-
-
... More
upto 300 mm dia
-
-
-
... More
In Soft soil
1
-
-
... More
In Hard soil
1
-
-
... More
In sandy Soil
1
-
-
... More
In Stone Soil
1
-
-
... More
Above300 mm to 450 mm dia
-
-
-
... More
In Soft soil
1
-
-
... More
In Hard soil
1
-
-
... More
In sandy Soil
1
-
-
... More
In Stone Soil
1
-
-
... More
Above 450 mm to 600 mm dia
-
-
-
... More
In Soft soil
1
-
-
... More
In Hard soil
1
-
-
... More
In sandy Soil
1
-
-
... More
In Stone Soil
1
-
-
... More
Above 600 mm to 900 mm dia
-
-
-
... More
In Soft soil
1
-
-
... More
In Hard soil
1
-
-
... More
In sandy Soil
1
-
-
... More
In Stone Soil
1
-
-
... More
Providing double flange sluice valve confirming for IS - 2906 / 14846 including worn gear as per test pressure stailess steel spindle , caps transportation etc. all complete FOR Rateincluding all taxes . .
-
-
-
... More
Without byepass arrangement - PN-1.6
-
-
-
... More
700MM
1
-
-
... More
750 MM
1
-
-
... More
800 MM
1
-
-
... More
900 MM
1
-
-
... More
1000 MM
1
-
-
... More
1100 MM
1
-
-
... More
1200MM
1
-
-
... More
With byepass arrangement - PN-1.6
-
-
-
... More
50 MM
1
-
-
... More
65 MM
1
-
-
... More
80 MM
1
-
-
... More
100 MM
1
-
-
... More
125 MM
1
-
-
... More
Design and Supply of V -wire screen laterals suitable for infiltration Galleryas per site condition and detail provided End connection suitable flange excluding taxes and transportation .
(M1040)
-
-
-
... More
Dia - 06 inch ( 150 mm )
1
-
-
... More
ID - 153 mm OD -167 mm
-
-
-
... More
Screen thickness - 07 mm
-
-
-
... More
Slot - 1.00 mm
-
-
-
... More
MOC - Low Carbon Galvenised steel
-
-
-
... More
Length - 5 mtr.
-
-
-
... More
Dia - 08 inch ( 200 mm )
1
-
-
... More
ID - 205 mm OD -221mm
-
-
-
... More
Screen thickness - 08 mm
-
-
-
... More
Slot - 1.00 mm
-
-
-
... More
MOC - Low Carbon Galvenised steel
-
-
-
... More
Length - 5 mtr.
-
-
-
... More
Dia - 10 inch ( 250 mm )
1
-
-
... More
ID - 256 mm OD -276mm
-
-
-
... More
Screen thickness - 10 mm
-
-
-
... More
Slot - 1.00 mm
-
-
-
... More
MOC - Low Carbon Galvenised steel
-
-
-
... More
Length - 5 mtr.
-
-
-
... More
Dia - 12 inch ( 300 mm )
1
-
-
... More
ID - 306 mm OD -326 mm
-
-
-
... More
Screen thickness - 10 mm
-
-
-
... More
Slot - 1.00 mm
-
-
-
... More
MOC - Low Carbon Galvenised steel
-
-
-
... More
Length - 5 mtr.
-
-
-
... More
Dia - 14 inch ( 350 mm )
1
-
-
... More
ID - 338 mm OD -363 mm
-
-
-
... More
Screen thickness - 12.5 mm
-
-
-
... More
Slot - 1.00 mm
-
-
-
... More
MOC - Low Carbon Galvenised steel
-
-
-
... More
Length - 5 mtr.
-
-
-
... More
Supplying all materials, labours, equipments for lowering 125mm dia blue UPVC casing pipe as casing for protecting the sides from falling during the process of drilling all complete including carriage of materials to work site (Basic Rate).
(M1041)
1
-
-
... More
Supplying all tools, equipments and labour and doing washing, flushing and development of drilled tube well to give clean and clear water all complete as per dirction E/I (Basic Rate).
(M1042)
-
-
-
... More
Supplying labour cement and calcium chloride or bentonite solution and equipments for grouting the casing pipe after lowering in the bore including carriage of materials to work site etc. all complete as per specification & direction of E/I (Basic Rate).
(M1043)
1
-
-
... More
Supplying labour and equipments including 125mm dia G.I. Cap and fitting and fixing over the casing pipe of tube well properly and taking it out as per direction E/I (The cap will be the property of department) (Basic Rate).
(M1044)
1
-
-
... More
Supplying all materials, labours, equipments for constructing P.C.C. (1:2:4) circular platform around drilled tube well including 12mm thick cement plaster (1:4) with neat cement punning over exposed surface as per UNICEF design, etc. all complete including carriage of materials (Basic Rate).
(M1045)
1
-
-
... More
Supplying all materials, labours and equipments for constructing P.C.C. (1:2:4) drain as per UNICEF design etc. all complete including carriage of materials (Basic Rate).
(M1046)
1
-
-
... More
Supplying extra Deep well Hand Pump Complete sets with Cylinder Assembly & Connecting Rod (12 Pcs) as per IS : 15500 Part-2/2004 (Basic Rate).
(M1047)
-
-
-
... More
Supply of 200mm dia x 3.00m long UPVC casing pipe conferming to IS : 12818 : 2016 (CML No. 5543459) latest revision including carrigae (Basic Rate).
(M1048)
1
-
-
... More
Supply of 200mm dia ribbed Screen pipe conferming to IS : 12818 : 2016 (CML No. 5543459) latest revision including carrigae (Basic Rate).
(M1049)
-
-
-
... More
Supply of 125mm dia ribbed Screen pipe conferming to IS : 12818 : 2016 (CML No. 5543459) latest revision including carrigae (Basic Rate).
(M1050)
1
-
-
... More
Supplying all tools, equipments and labour and lowering 32 mm dia medium quality G.I. pipe in drilled tube well in 3 Mtrs. Length all complete as per dirction E/I including carriage of materials (Basic Rate).
(M1051)
-
-
-
... More
Supplying all tools, Labour for fitting and fixing deep well cylinder with necessary connecting rod complete job as per specification & direction of E/I including carriage of materials (Basic Rate).
(M1052)
1
-
-
... More
Supplying all materials, labours and fixing India mark II Hand Pump with all accessories all complete job as per direction of E/I including carriage of materials (Basic Rate).
(M1053)
1
-
-
... More
Design, Supply, Installation testing & Commissioning of packaged water treatment plants (Unconventional type) of different capacity with (20 hours operation) comprising of lamella clarifier, Static Mixture Flocculation Tank (SMET), Multi grade filter (MGF) with best quality filter media, Lime/ coagulant/polymer dosing system hypo chloride dosing system, Raw water feed pump/clear water transfer pump (either or), sludge transfer cum recirculation pump, filter feed pump & back wash pump including all fitting like valve and other special fittings and electrical power supply to the different supplied units with MCB panel internal electrification with lighting arrangement with treatment plant site with provision of chemical storage and water testing boratory facility should be from a reputed manufacturer/ authorized distribution / authorized dealer conforming to relevant IS codes and certified by ISO-9001-2008 & 14001, It also include cost of civil foundation, including clarified water tank internal connecting pipe line from Raw Water inlet to CWR and applying internal epoxy paint on the supply equipment All the prices are exclusive of GST, Allied structure/items which are site specific such as external electrification, approach road, foot Bridge, cofferdam, compound wall, SCADA and automation, CWR pumps etc are to be considered extra. (M1054)
-
-
-
... More
Packaged lamella clarified type WTP with MGF capacity in MLD.
-
-
-
... More
PUMPS (M1055)
-
-
-
... More
Supplying 100 mm dia submersible pump sets confirming to IS 8034 and motor confirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. Motor suitable for working on 415V+10%, 3PH, 50 Hz, A.C. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump.
-
-
-
... More
Submersible Pump set 100 mm dia (with Polypropylene/ Noryl Impeller) up to 20 stages
-
-
-
... More
1 H.P.
1
-
-
... More
1.5 HP
1
-
-
... More
2 HP
1
-
-
... More
2.5 HP
1
-
-
... More
3.0 HP
1
-
-
... More
4.0 HP
1
-
-
... More
5.0 HP
1
-
-
... More
Supply rate should be increased by Rs 200/- per stage for pump with more than 20 stages
-
-
-
... More
Submersible Pump 150 mm dia (with Bronze impeller) up to 8 stages
-
-
-
... More
1.5 HP
1
-
-
... More
2.0 HP
1
-
-
... More
3.0 HP
1
-
-
... More
4.0 HP
1
-
-
... More
5.0 HP
1
-
-
... More
6.0 HP
1
-
-
... More
7.5 HP
1
-
-
... More
Supply rate should be increased by Rs 600/- per stage for pump with more than 8 stages
-
-
-
... More
Submersible Pump 150 mm dia (with Bronze Impeller) up to 12 stages
-
-
-
... More
8.0 HP
1
-
-
... More
9.0 HP
1
-
-
... More
10.0 HP
1
-
-
... More
11.0 HP
1
-
-
... More
12.5 HP
1
-
-
... More
15.0 HP
1
-
-
... More
Supply rate should be increased by Rs 600/- per stage for pump with more than 12 stages
-
-
-
... More
Submersible Pump 150 mm dia (with Bronze Impeller) up to 20 stages
-
-
-
... More
17.5 HP
1
-
-
... More
20.0 HP
1
-
-
... More
25 HP
1
-
-
... More
1) Supply rate should be increased by Rs 600/- per stage for pump with more than 20 stages for Bore well only.
-
-
-
... More
For other use 200 mm dia pump shall be preferred over 150 mm dia with more than 20 stage pump.
-
-
-
... More
2) For 150 mm dia energy efficient pumps add as below
-
-
-
... More
a. up to 8 stages :- 3% on supply rate
-
-
-
... More
b. up to 12 stages :- 4% on supply rate
-
-
-
... More
c. up to 15 stages :- 5% on supply rate
-
-
-
... More
PRESSURE GAUGE (M1056)
-
-
-
... More
Providing fabricating, testing and commisioning pressure vessel fabricating in M.S plate on providing foundation including epoxy paint
-
-
-
... More
Pressure gauge (100 mm dia)
1
-
-
... More
Pressure gauge (150 mm dia)
1
-
-
... More
Vacuum / Combination gauge
-
-
-
... More
Supplying Vacuum Gauge/ Combination gauge of required range complete with syphon tube, isolating cock suitable for 12 mm dia G.I. pipe.
-
-
-
... More
Vacuum / Combination gauge – 100 mm dia
1
-
-
... More
Vacuum / Combination gauge – 150 mm dia
1
-
-
... More
Lifting Equipment (M1057)
-
-
-
... More
Chain pulley Block
-
-
-
... More
Supplying triple spur gear type chain pulley block suitable for capacity as below with 3 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per IS 3832 carrying ISI mark.
-
-
-
... More
1 Tonne Capacity
1
-
-
... More
2 Tonne Capacity
1
-
-
... More
3 Tonne Capacity
1
-
-
... More
Hand operated Circular or Rectangular Travelling Crane (Single Girder)
-
-
-
... More
Supplying Single Girder Hand Operated Circular/ Rectangular Travelling Crane with 6 m lift complete with chain pulley block ISI marked and travelling trolley both tested for 50% overload including arrangement for longitudinal travel / circular travel and cross travel with wheel, hand chain, etc complete.
-
-
-
... More
3 Tonne Capacity
-
-
-
... More
Up to 5 m span
1
-
-
... More
Above 5 m up to 6 m span
1
-
-
... More
Above 6 m up to 8 m span
1
-
-
... More
5 Tonne Capacity
-
-
-
... More
Up to 5 m span
1
-
-
... More
Above 5 m up to 6 m span
1
-
-
... More
Above 6 m up to 8 m span
1
-
-
... More
Above 8 m up to 10 m span
1
-
-
... More
Electric Operated Circular or Rectangular Travelling Crane (Single Girder)
-
-
-
... More
Supplying single girder Electrically Operated Rectangular Over head Travelling Crane with 6 m lift complete with wire rope hoist, class II duty, all three motions electrically operated by suitable rating motor IP 54, control panel and down pendant control block.
-
-
-
... More
5 Tonne Capacity
-
-
-
... More
Above 6 m up to 8 m span
1
-
-
... More
Above 8 m up to 10 m span
1
-
-
... More
7.5 Tonne Capacity
-
-
-
... More
Above 6 m upto 8 m span
1
-
-
... More
Above 8 m up to 10 m span
1
-
-
... More
10 Tonne Capacity
-
-
-
... More
Above 6 m up to 8 m span
1
-
-
... More
Above 8 m up to 10 m span
1
-
-
... More
Square Bar / Rail
-
-
-
... More
Providing, erecting and fixing square bar of EN 8 as rail for over head crane on provided track, girder / continuous corbel beam, including supporting plate and “J” bolts.
-
-
-
... More
50 X 50 mm (EN 8)
1
-
-
... More
40 X 40 mm (EN 8)
1
-
-
... More
Lightening Arrester, AB Switch, Insulators (M1058)
-
-
-
... More
Lightening Arrestor
-
-
-
... More
Supplying, erecting approved make thyrite type Lightening Arrestor suitable for H.T. supply with necessary ancillary material complete on provided cross arm and connected to overhead line.
-
-
-
... More
Suitable for 11 kV Supply, Distribution class
1
-
-
... More
Suitable for 22 kV Supply, Distribution class
1
-
-
... More
Suitable for 33 kV Supply, Station class
1
-
-
... More
Disc Insulator
-
-
-
... More
Supplying, erecting porcelain Disc Type Insulators with hardware fittings suitable for H.T. overhead line complete erected with nuts and bolts on provided cross arm
-
-
-
... More
Suitable for 11KV line
1
-
-
... More
Suitable for 33KV line
1
-
-
... More
Pin Insulator
-
-
-
... More
Supplying, erecting porcelain Pin Type Insulators with hardware fittings suitable for H.T. overhead line complete erected with nuts and bolts on provided cross arm
-
-
-
... More
Suitable for 11KV line
1
-
-
... More
Suitable for 33KV line
1
-
-
... More
Air break switch without Earth switch
-
-
-
... More
Supplying, erecting approved make H.T. outdoor type gang operated air break triple pole switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of G.I. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground with necessary clamps
-
-
-
... More
Suitable for 11KV line
-
-
-
... More
Rocking / Tilting type
1
-
-
... More
Rotating type
1
-
-
... More
Suitable for 33KV line
-
-
-
... More
Rocking / Tilting type
1
-
-
... More
Rotating type
1
-
-
... More
Air break switch with Earth switch
-
-
-
... More
Supplying, erecting approved make H.T. outdoor type gang operated air break triple pole switch with earth switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of G.I. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground with necessary clamps
-
-
-
... More
Suitable for 11KV line
-
-
-
... More
Rotating type
1
-
-
... More
Suitable for 33KV line
-
-
-
... More
Rotating type
1
-
-
... More
Drop out Fuse (channel mounted)
-
-
-
... More
Supplying, erecting approved make out door type Drop out fuse channel type with insulator complete with fuse holders fuse barrel with metal fittings, fuse element, with working current up to 50 Amp, capacity complete erected on provided cross arm, each set comprising 3 units
-
-
-
... More
Suitable for 11 KV line
1
-
-
... More
Suitable for 33 KV line
1
-
-
... More
Horn gap fuse (channel mounted)
-
-
-
... More
Supplying, erecting approved make out door type Horn gap type fuse with insulator, fuse element, with working current up to 50 Amp, capacity complete erected on provided cross arm, each set comprising 3 units
-
-
-
... More
Suitable for 11 KV line
1
-
-
... More
Suitable for 33 KV line
1
-
-
... More
TRANSFORMER (M1059)
-
-
-
... More
Power Transformer (with off load Tap changer) Any ISI Mark
-
-
-
... More
Supplying outdoor type copper wound transformer continuously rated for 3Ph, 50 Hz, at full load and temp. rise not exceeding 450 C by thermometer in oil and 500 C by the resistance in winding after continuous run at full load rating, the transformer should have oil immersed winding having vector group DY11, HT side connected in delta and LT side connected in star with neutral brought out connected to provide separate earthing. The Transformer shall have power terminal arrangement, bushing/ cable end box on HT side and cable end box on LT side. 2 Nos channels with stoppers shall be provided and fixed on the provided plinth for mounting the transformer. The transformer should have following standard fittings. Transformer shall be latest manufacturing standards as per amended IS specifications and the load & No load losses shall be limited to the values given below or as per IS or Norms issued by SEB which ever are lower-
-
-
-
... More
1. Oil conservator with filling hole with cap and plain oil level gauge.
-
-
-
... More
2. Silica gel dehydrating breather charged with silica gel.
-
-
-
... More
3. Oil drain valve
-
-
-
... More
4. Oil filter valve
-
-
-
... More
5. Lifting eyes/ hooks
-
-
-
... More
6. Two earthing terminals
-
-
-
... More
7. Diagram and rating plate
-
-
-
... More
8. Air vent
-
-
-
... More
9. Explosion vent
-
-
-
... More
10. 100mm dia thermo meter with thermometer pocket
-
-
-
... More
11. Four bi directional plain roller.
-
-
-
... More
Power Transformer 11000/433 volts With off load Tap Changer – 12.5% to +2.5% in steps of 2.5% as per BIS Level-2.
-
-
-
... More
63 KVA ( No load loss 180w and load loss 1235w)
1
-
-
... More
100 KVA (No load loss 260w and load loss 1760w)
1
-
-
... More
160KVA (No load loss 260w and load loss 1760w)
1
-
-
... More
200KVA(No load loss 500w and load loss3000w)
1
-
-
... More
250KVAA(No load loss 550w and load loss3600w)
1
-
-
... More
315KVA (No load loss 580w and load loss 4200w)
1
-
-
... More
400 KVA (No load loss 715w and load loss 5000w)
1
-
-
... More
500 KVA (No load loss 850w and load loss 5800w)
1
-
-
... More
630 KVA (No load loss 1000w and load loss 7000w)
1
-
-
... More
750 KVA (No load loss 1500w and load loss 8000w)
1
-
-
... More
Power Transformer (with on load Tap changer)
-
-
-
... More
Supplying outdoor type copper wound transformer continuously rated for 3Ph, 50 Hz, at full load and temp. rise not exceeding 450 C by thermometer in oil and 500 C by the resistance in winding after continuous run at full load rating, the transformer should have oil immersed winding having vector group DY11, HT side connected in delta and LT side connected in star with neutral brought out connected to provide separate earthing. The Transformer shall have power terminal arrangement, bushing/ cable end box on HT side and cable end box on LT side. 2Nos channels with stoppers shall be provided and fixed on the provided plinth for mounting the transformer. The transformer should have following standard fittings. The OLTC should be suitable for minimum 50 operations per day. Transformer shall be latest manufacturing standards as per amended IS specifications and the load & No load losses shall be limited to the values given below or as per IS or Norms issued by SEB which ever are lower-
-
-
-
... More
1. Oil conservator with filling hole with cap and plain oil level gauge.
-
-
-
... More
2. Silica gel dehydrating breather charged with silica gel.
-
-
-
... More
3. Oil drain valve
-
-
-
... More
4. Oil filter valve
-
-
-
... More
5. Lifting eyes/ hooks
-
-
-
... More
6. Two earthing terminals
-
-
-
... More
7. Diagram and rating plate
-
-
-
... More
8. Air vent
-
-
-
... More
9. Explosion vent
-
-
-
... More
10. 100mm dia thermo meter with thermometer pocket
-
-
-
... More
11. Four bi directional plain roller.
-
-
-
... More
12. Buchholz relay
-
-
-
... More
13. Resistance Temp. detector
-
-
-
... More
14. Marshalling box
-
-
-
... More
15. Automatic Voltage Regulator (AVR)
-
-
-
... More
16. Remote Tap Changing Controller (RTCC)
-
-
-
... More
Transformer 11000/433 volts With on load Tap Changer – 15% to +5% in steps of 1.25% with RTCC, AVR and marshalling box and other specification as per BIS Level-2.
-
-
-
... More
750 KVA
1
-
-
... More
1000 KVA
1
-
-
... More
1250 KVA
1
-
-
... More
1600 KVA
1
-
-
... More
2000 KVA
1
-
-
... More
Motors (M1060)
-
-
-
... More
Foot Mounted Motors TEFC 1500 RPM
-
-
-
... More
Supplying Foot Mounted TEFC 1500 RPM, squirrel cage induction motor, conforming to IS 325 having continuous rating suitable for operation at 415 volts +/-10%, 3 Phase, 50 HZ +/-3% with “F” class insulation temperature rise limited to class “B” insulation. Motors conform to IS-12615 with efficiency level IE3 and provided with enclosure protection class IP-55.
-
-
-
... More
15 KW (20 HP)
1
-
-
... More
18.5 KW ( 25 HP)
1
-
-
... More
22 KW ( 30 HP)
1
-
-
... More
30 KW ( 40 HP)
1
-
-
... More
37 KW ( 50 HP)
1
-
-
... More
45 KW ( 60 HP)
1
-
-
... More
55 KW ( 75 HP)
1
-
-
... More
75 KW ( 100 HP)
1
-
-
... More
90 KW ( 120 HP)
1
-
-
... More
110 KW ( 150 HP)
1
-
-
... More
132KW(180HP)
1
-
-
... More
160KW( 215 HP)
1
-
-
... More
250KW (335 HP)
1
-
-
... More
Foot Mounted Motor TEFC 1500 RPM
-
-
-
... More
0.75 KW(1HP)
1
-
-
... More
1.1 KW ( 1.5 HP)
1
-
-
... More
1.5 KW ( 2 HP)
1
-
-
... More
2.2 KW ( 3 HP)
1
-
-
... More
3.7 KW ( 5 HP)
1
-
-
... More
5.5 KW ( 7.5 HP)
1
-
-
... More
7.5 KW ( 10 HP)
1
-
-
... More
9.3 KW ( 12.5 HP)
1
-
-
... More
11 KW ( 15 HP)
1
-
-
... More
Aluminium Cable (M1061)
-
-
-
... More
CABLE
-
-
-
... More
Aluminium conductor three core, XLPE / PVC insulated & armoured cable .
-
-
-
... More
Supplying XLPE / PVC insulated, armoured cable 1100 V grade with ISI mark Three core, solid / stranded aluminium conductor with 6 mm thick 25 mm width M.S. spacer with G.I. Earth wire 6 sq mm, complete in an approved manner.
-
-
-
... More
3 core 2.5 sq mm
1
-
-
... More
3 core 4 sq mm
1
-
-
... More
3 core 6 sq mm
1
-
-
... More
3 core 10 sq mm
1
-
-
... More
3 core 16 sq mm
1
-
-
... More
3 core 25 sq mm
1
-
-
... More
3 core 35 sq mm
1
-
-
... More
3 core 50 sq mm
1
-
-
... More
3 core 70 sq mm
1
-
-
... More
3 core 95 sq mm
1
-
-
... More
3 core 120 sq mm
1
-
-
... More
3 core 150 sq mm
1
-
-
... More
3 core 185 sq mm
1
-
-
... More
3 core 240 sq mm
1
-
-
... More
3 core 300 sq mm
1
-
-
... More
3 core 400 sq mm
1
-
-
... More
Aluminium conductor 3.5 core, XLPE / PVC insulated & unarmoured cable
-
-
-
... More
Supplying XLPE / PVC insulated, unarmoured cable 1100 V grade with ISI mark Three and half core, stranded aluminium conductor with 6 mm thick 25 mm width M.S. spacer with G.I. Earth wire 6 sq mm, complete in an approved manner.
-
-
-
... More
3.5 core 25 sq mm
1
-
-
... More
3.5 core 35 sq mm
1
-
-
... More
3.5 core 50 sq mm
1
-
-
... More
3.5 core 70 sq mm
1
-
-
... More
3.5 core 95 sq mm
1
-
-
... More
3.5 core 120 sq mm
1
-
-
... More
3.5 core 150 sq mm
1
-
-
... More
3.5 core 185 sq mm
1
-
-
... More
3.5 core 240 sq mm
1
-
-
... More
3.5 core 300 sq mm
1
-
-
... More
3.5 core 400 sq mm
1
-
-
... More
HT Aluminium three core 3.3 KVE cable XLPE insulated
-
-
-
... More
Supplying HT Aluminium three core cable XLPE insulated ,insulation screened with extruded semi conducting compound in combination with copper tape (0.3 kA for 1 sec.) cores laidup inner sheath of PVC tape ,galvanised steel flat strip armoured,and overall PVC sheathed cable conforming to IS :7098 /II/85 with latest amendments
-
-
-
... More
3 core 35 sq mm
1
-
-
... More
3 core 50 sq mm
1
-
-
... More
3 core 70 sq mm
1
-
-
... More
3 core 95 sq mm
1
-
-
... More
3 core 120 sq mm
1
-
-
... More
3 core150sq mm
1
-
-
... More
3 core 185 sq mm
1
-
-
... More
3 core 240sq mm
1
-
-
... More
3 core 300 sq mm
1
-
-
... More
3 core 400 sq mm
1
-
-
... More
HT Aluminium three core 6.6 KV(UE)/11KV E cable XLPE insulated
-
-
-
... More
Supplying HT Aluminium three core cable XLPE insulated ,insulation screened with extruded semi conducting compound in combination with copper tape (0.3 kA for 1 sec.) cores laidup inner sheath of PVC tape ,galvanised steel flat strip armoured,and overall PVC sheathed cable conforming to IS :7098 /II/85 with latest amendments
-
-
-
... More
3 core 35 sq mm
1
-
-
... More
3 core 50 sq mm
1
-
-
... More
3 core 70 sq mm
1
-
-
... More
3 core 95 sq mm
1
-
-
... More
3 core 120 sq mm
1
-
-
... More
3 core150sq mm
1
-
-
... More
3 core 185 sq mm
1
-
-
... More
3 core 240sq mm
1
-
-
... More
3 core 300 sq mm
1
-
-
... More
3 core 400 sq mm
1
-
-
... More
HT Aluminium three core 11KV(UE) cable XLPE insulated
-
-
-
... More
Supplying HT Aluminium three core cable XLPE insulated ,insulation screened with extruded semi conducting compound in combination with copper tape (0.3 kA for 1 sec.) cores laidup inner sheath of PVC tape ,galvanised steel flat strip armoured,and overall PVC sheathed cable conforming to IS :7098 /II/85 with latest amendments
-
-
-
... More
3 core 35 sq mm
1
-
-
... More
3 core 50 sq mm
1
-
-
... More
3 core 70 sq mm
1
-
-
... More
3 core 95 sq mm
1
-
-
... More
3 core 120 sq mm
1
-
-
... More
3 core150sq mm
1
-
-
... More
3 core 185 sq mm
1
-
-
... More
3 core 240sq mm
1
-
-
... More
3 core 300 sq mm
1
-
-
... More
3 core 400 sq mm
1
-
-
... More
Aluminium conductor three core, XLPE / PVC insulated & unarmoured cable .
-
-
-
... More
Supplying XLPE / PVC insulated, unarmoured cable 1100 V grade with ISI mark Three core, solid / stranded aluminium conductor with 6 mm thick 25 mm width M.S. spacer with G.I. Earth wire 6 sq mm, complete in an approved manner.
-
-
-
... More
3 core 4 sq mm
1
-
-
... More
3 core 6 sq mm
1
-
-
... More
3 core 10 sq mm
1
-
-
... More
3 core 16 sq mm
1
-
-
... More
3 core 25 sq mm
1
-
-
... More
3 core 35 sq mm
1
-
-
... More
3 core 50 sq mm
1
-
-
... More
3 core 70 sq mm
1
-
-
... More
3 core 95 sq mm
1
-
-
... More
3 core 120 sq mm
1
-
-
... More
3 core 150 sq mm
1
-
-
... More
3 core 185 sq mm
1
-
-
... More
3 core 240 sq mm
1
-
-
... More
3 core 300 sq mm
1
-
-
... More
3 core 400 sq mm
1
-
-
... More
Copper Cable (M1062)
1
-
-
... More
CABLE
1
-
-
... More
3 Core PVC insulated, PVC sheathed copper conductor flat submersible cable .
1
-
-
... More
Supplying , Flat flexible submersible cable with, copper conductor, PVC insulated, and PVC sheathed .
1
-
-
... More
3 core 1.5 sq mm
1
-
-
... More
3 core 2.5 sq mm
1
-
-
... More
3 core 4 sq mm
1
-
-
... More
3 core 6 sq mm
1
-
-
... More
3 core 10 sq mm
1
-
-
... More
3 core 16 sq mm
1
-
-
... More
3 core 25 sq mm
1
-
-
... More
3 core 35 sq mm
1
-
-
... More
Copper conductor three core, XLPE / PVC insulated & unarmoured cable .
-
-
-
... More
Supplying XLPE / PVC insulated, unarmoured cable 1100 V grade with ISI mark Three core, solid / stranded copper conductor with 6 mm thick 25 mm width M.S. spacer with G.I. Earth wire 6 sq mm, complete in an approved manner.
-
-
-
... More
3 core 1.5 sq mm
1
-
-
... More
3 core 2.5 sq mm
1
-
-
... More
3 core 4 sq mm
1
-
-
... More
3 core 6 sq mm
1
-
-
... More
3 core 10 sq mm
1
-
-
... More
3 core 16 sq mm
1
-
-
... More
3 core 25 sq mm
1
-
-
... More
3 core 35 sq mm
1
-
-
... More
3 core 50 sq mm
1
-
-
... More
3 core 70 sq mm
1
-
-
... More
3 core 95 sq mm
1
-
-
... More
Copper conductor 3.5 core, XLPE / PVC insulated & armoured cable .
-
-
-
... More
Supplying XLPE / PVC insulated, armoured cable 1100 V grade with ISI mark 3.5 core, solid / stranded copper conductor with 6 mm thick 25 mm width M.S. spacer with G.I. Earth wire 6 sq mm, complete in an approved manner.
-
-
-
... More
3.5 core 1.5 sq mm
1
-
-
... More
3.5 core 2.5 sq mm
1
-
-
... More
3.5 core 4 sq mm
1
-
-
... More
3.5 core 6 sq mm
1
-
-
... More
3.5 core 10 sq mm
1
-
-
... More
3.5 core 16 sq mm
1
-
-
... More
3.5 core 25 sq mm
1
-
-
... More
3.5 core 35 sq mm
1
-
-
... More
3.5 core 50 sq mm
1
-
-
... More
3 .5 core 70 sq mm
1
-
-
... More
3.5 core 95 sq mm
1
-
-
... More
3.5 core 120 sq mm
1
-
-
... More
3 .5 core150sq mm
1
-
-
... More
3.5 core 185 sq mm
1
-
-
... More
3.5 core 240sq mm
1
-
-
... More
3.5 core 300 sq mm
1
-
-
... More
3.5 core 400 sq mm
1
-
-
... More
copper conductor 3.5 core XLPE/PVC unarmoured
-
-
-
... More
Supplying XLPE / PVC insulated, unarmoured cable 1100 V grade with ISI mark 3.5 core, solid / stranded copper conductor with 6 mm thick 25 mm width M.S. spacer with G.I. Earth wire 6 sq mm, complete in an approved manner.
-
-
-
... More
3.5 core 25 sq mm
1
-
-
... More
3.5 core 35 sq mm
1
-
-
... More
3.5 core 50 sq mm
1
-
-
... More
3.5 core 70 sq mm
1
-
-
... More
3.5 core 95 sq mm
1
-
-
... More
3.5 core 120 sq mm
1
-
-
... More
3.5 core150sq mm
1
-
-
... More
3.5 core 185 sq mm
1
-
-
... More
3.5 core 240sq mm
1
-
-
... More
3.5 core 300 sq mm
1
-
-
... More
3.5 core 400 sq mm
1
-
-
... More
Copper conductor three core, XLPE / PVC insulated & armoured cable .
1
-
-
... More
Supplying XLPE / PVC insulated, armoured cable 1100 V grade with ISI mark Three core, solid / stranded copper conductor with 6 mm thick 25 mm width M.S. spacer with G.I. Earth wire 6 sq mm, complete in an approved manner.
1
-
-
... More
3 core 1.5 sq mm
1
-
-
... More
3 core 2.5 sq mm
1
-
-
... More
3 core 4 sq mm
1
-
-
... More
3 core 6 sq mm
1
-
-
... More
3 core 10 sq mm
1
-
-
... More
3 core 16 sq mm
1
-
-
... More
3 core 25 sq mm
1
-
-
... More
3 core 35 sq mm
1
-
-
... More
3 core 50 sq mm
1
-
-
... More
3 core 70 sq mm
1
-
-
... More
3 core 95 sq mm
1
-
-
... More
3 core 120 sq mm
1
-
-
... More
3 core 150sq mm
1
-
-
... More
3core 185 sq mm
1
-
-
... More
3 core 240 sq mm
1
-
-
... More
3 core 300 sq mm
1
-
-
... More
3 core 400 sq mm
1
-
-
... More
FOOT VALVE (M1063)
-
-
-
... More
Foot valve
-
-
-
... More
Supplying C.I. foot valve having single leather flap and gunmetal seating. Valve shall be fixed on suction side of pump as per requirement including jointing material and hardware.
-
-
-
... More
Flanged type
-
-
-
... More
50 mm
1
-
-
... More
65 mm
1
-
-
... More
80 mm
1
-
-
... More
100 mm
1
-
-
... More
125 mm
1
-
-
... More
150 mm
1
-
-
... More
Air Circuit Breaker (M1064)
-
-
-
... More
ACB breaking capacity 50kA Thermal Magnetic Manual draw Out type 3 pole
-
-
-
... More
630A
1
-
-
... More
800A
1
-
-
... More
1000A
1
-
-
... More
1250A
1
-
-
... More
1600A
1
-
-
... More
2000A
1
-
-
... More
STARTER (M1065)
-
-
-
... More
D.O.L. starter with SS Enclosure with 380/415 Volt coil
-
-
-
... More
7.5 H.P.
1
-
-
... More
10 H.P.
1
-
-
... More
Supplying Fully automatic star delta starter to operate induction motor working on 415v,3phase,50 hz with no volt coil, Over load element, ON-OFF push buttons, with necessary materials and connected to supply, etc complete starter with original sheet steel encloser
-
-
-
... More
F.A.S.D starter
-
-
-
... More
10.0 H.P.
1
-
-
... More
15 H.P.
1
-
-
... More
20 H.P.
1
-
-
... More
25 H.P.
1
-
-
... More
35 H.P.
1
-
-
... More
40 HP
1
-
-
... More
50 HP
1
-
-
... More
75 H.P.
1
-
-
... More
100 H.P.
1
-
-
... More
125 H.P.
1
-
-
... More
150 H.P.
1
-
-
... More
250 H.P.
1
-
-
... More
Servo Controlled Automatic Voltage Stabilizer (M1066)
-
-
-
... More
Providing, erecting Servo Controlled Automatic Voltage stabiliser suitable for out put voltage of 415 Volt +/-1%, 3 Ph, 50 Hz, with copper wound transformer (air/oil cooled) as mentioned below. The stabilizer shall function satisfactorily even if incoming supply is unbalanced between phases within range of 10%. The stabilizer should be constructed in cubical box, with bidirectional wheels for easy handling, necessary monitors and user's controls on front panel such as indication, alarm, volt meter and selector switch for measuring input and out put voltage, Auto/Manual selector switch, Raise/Low push buttons etc. Suitable capacity termination strips and bus bars for incoming and out going cable should be provided. All three phases shall be independently monitored and corrected. Following protections and indications shall be incorporated
Over Voltage / Under Voltage
Single Phasing
Cut off contactor with electronic output sensing unit
-
-
-
... More
Servo Controlled Automatic Voltage Stabiliser(Out put 415 +/-1%) Input 150 to 450 Volt
-
-
-
... More
20 kVA Air cooled
-
-
-
... More
25 kVA Air cooled
-
-
-
... More
30 kVA Air cooled
-
-
-
... More
40 kVA Air cooled
-
-
-
... More
50 kVA Oil cooled
-
-
-
... More
60 kVA Oil cooled
-
-
-
... More
75 kVA Oil cooled
-
-
-
... More
100 kVA Oil cooled
-
-
-
... More
125 kVA Oil cooled
-
-
-
... More
Servo Controlled Automatic Voltage Stabiliser (Out put 415 +/-1%) Input 280 to 460 Volt
-
-
-
... More
15 KVA Air cooled
1
-
-
... More
20 KVA Air cooled
1
-
-
... More
25 KVA Air cooled
1
-
-
... More
30 KVA Air cooled
1
-
-
... More
40 kVA Air cooled
1
-
-
... More
50KVA Air cooled
1
-
-
... More
60 KVA Oil cooled
1
-
-
... More
75KVA Oil cooled
1
-
-
... More
100 KVA Oil cooled
1
-
-
... More
125 kVA Oil cooled
1
-
-
... More
150 KVA oil cooled
1
-
-
... More
200KVA oil cooled
1
-
-
... More
250KVA oil cooled
1
-
-
... More
300 KVA oil cooled
1
-
-
... More
400 KVA oil cooled
1
-
-
... More
Termination Kit (M1067)
-
-
-
... More
Providing and errecting IN-DOOR type termination kit, for 3.3kV/ 6.6 kV / 11kV/ 22kV/33kV XLPE Screened 3 core cable
-
-
-
... More
IN-DOOR Termination KIT for 3.3kV(E/UE) / 6.6 kV(E) XLPE 3 core cable
-
-
-
... More
25-50 mm2
1
-
-
... More
70-120 mm2
1
-
-
... More
150-185 mm2
1
-
-
... More
240-400 mm2
1
-
-
... More
OUT-DOOR Termination KIT for 3.3(E/UE)/6.6 KV(E) XLPE 3 core cable
-
-
-
... More
25-50 mm2
1
-
-
... More
70-120 mm2
1
-
-
... More
150-185 mm2
1
-
-
... More
240-400 mm2
1
-
-
... More
Straight through Joint for 3.3KV(E/UE)/ 6.6 KV(E) XLPE 3 core cable
-
-
-
... More
25-50 mm2
1
-
-
... More
70-120 mm2
1
-
-
... More
150-185 mm2
1
-
-
... More
240-300 mm2
1
-
-
... More
IN DOOR Termination KIT for 11KV(E) XLPE Screened 3 core cable
-
-
-
... More
25-50 mm2
1
-
-
... More
70-120 mm2
1
-
-
... More
150-185 mm2
1
-
-
... More
240-400 mm2
1
-
-
... More
OUT DOOR Termination KIT for 11KV(E) XLPE Screened 3 core cable
-
-
-
... More
25-50 mm2
1
-
-
... More
70-120 mm2
1
-
-
... More
150-185 mm2
1
-
-
... More
240-400 mm2
1
-
-
... More
Straight through Joint for 11 KV(E) XLPE Screened 3 core cable
-
-
-
... More
25-50 mm2
1
-
-
... More
70-120 mm2
1
-
-
... More
150-185 mm2
1
-
-
... More
240-300 mm2
1
-
-
... More
IN DOOR Termination KIT for 22KV(E) XLPE Screened 3 core cable
-
-
-
... More
25-50 mm2
1
-
-
... More
70-120 mm2
1
-
-
... More
150-185 mm2
1
-
-
... More
240-400 mm2
1
-
-
... More
OUT DOOR Termination KIT for 22KV(E) XLPE Screened 3 core cable
-
-
-
... More
25-50 mm2
1
-
-
... More
70-120 mm2
1
-
-
... More
150-185 mm2
1
-
-
... More
240-400 mm2
1
-
-
... More
Straight through Joint for 22 KV(E) XLPE Screened 3 core cable
-
-
-
... More
25-50 mm2
1
-
-
... More
70-95 mm2
1
-
-
... More
120-150 mm2
1
-
-
... More
185-240 mm2
1
-
-
... More
300-400 mm2
1
-
-
... More
IN DOOR Termination KIT for 33KV(E) XLPE Screened 3 core cable
-
-
-
... More
25-50 mm2
1
-
-
... More
70-95 mm2
1
-
-
... More
120-185 mm2
1
-
-
... More
240-400 mm2
1
-
-
... More
OUT DOOR Termination KIT for 33 KV(E) XLPE Screened 3 core cable
-
-
-
... More
25-50 mm2
1
-
-
... More
70-95 mm2
1
-
-
... More
120-185 mm2
1
-
-
... More
240-400 mm2
1
-
-
... More
Straight through Joint for 33 KV(E) XLPE Screened 3 core cable
-
-
-
... More
35-70 mm2
1
-
-
... More
95-150 mm2
1
-
-
... More
185-300 mm2
1
-
-
... More
400 mm2
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements