Drinking Water And Sanitation Department Tender

View complete overview of Jharkhand DDWS Tender

Drinking Water And Sanitation Department

Pipes and Pipe Related ActivitiesCivil WorksWater Storage And Supply
Views216 Views
Downloads27 Downloads

Opening Date

16 Nov 2021

Closing Date

08 Dec 2021

Tender Amount

₹ 6,62,17,000

Costs

Summary

Tonto Part-a Cluster - 09 (c) Under D.w.and S. Division, Chaibasa

Description

Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

  • Tender Id

    Unregistered TenderId
  • BidAward Id

    Unregistered BidAwardId
  • Tender No

    Data for unregistered User Data for unregistered User Data for unregistered User Data for unregistered User
  • Tender Authority

    Data for unregistered User Data for unregistered User Data for unregistered User Data for unregistered User
  • Purchaser Address

    Authority for unregistered User
  • Email

    Data for unregistered User
  • Website

    wwww.unregistereduser.com

BOQ Items

ItemQuantityUnitsRateAmount
... more
MODEL-1A WITH SOURCE of DT (Drilled T/W 125/115 dia mm, 60M deep)
---
... more
Tube Well (21Nos.)
---
... more
Drilling Portion
---
... more
Construction for 115/125 mm dia drilled Tube-Well for drilling in all kinds of soil rock for installation of hand pump with D.T.H Rig machine all complete including supplying all materials, labours, tools, drilling, rigs, air compressor and equipments as well as fuel lubricant for making 125/115 mm dia boring etcand cost of transporting rig machine and other vehicle up to site work as per specification and direction of Engineer-in-charge.
---
... more
(a) Up to 30mtr. Depth bellow G.L. in Rural Areas
630P/M--
... more
(b) Beyond 30mtr. In Rural Areas
630P/M--
... more
Providing all equipments and labour for lowering 125mm dia blue UPVC Casing pipe as casing for protecting the side from falling during the process of drilling all complete job including carriage of material to work site.
315P/M--
... more
Supplying labour cement and calcium chloride or bentonite solution and equipments for Grouting to Casing Pipe all complete job including carriage of material to work site as per specification & direction of E/I
21Each--
... more
Supplying all tools, equipments and labour and doing washing, flushing and development of drilled tube well to give clean and clear water all complete as per direction E/I.
10.5Per Hr.--
... more
Supplying all materials labours and equipment including 125 mm dia GI/CI cap 125 mm dia T/W properly all complete and taking it out as per specification & direction of E/I. (the cap will be property of department)
21Each--
... more
Civil Portion
---
... more
Supplying all tools, equipment, labours and lowering 32 mm dia G.I. (Medium) pipe in DT in 3 mtr. Length all complete job as per direction of E/I. Including carriage of materials.
504Per Mtrs--
... more
Supplying all tools, Labour for fitting and fixing deep well cylinder with necessary connecting rod all complete job as per specification & direction of E/I.
21Each--
... more
Supplying all materials, labours for fitting and fixing of India Mark II Hand Pump with all accessories all job complete as per direction of E/I. Including carriage of materials.
21Each--
... more
Supplying all materials, labours and equipment for constructing PCC (1:2:4) circular platform around each drilled tube well including 12mm thick cement plaster (1:4) with neat cement punning over exposed surface as per UNICEF design etc. all complete. Including carriage of materials.
21Each--
... more
Supplying all materials labour and equipment for constructing PCC (1:2:4) drain as per UNICEF Design etc. all complete .Including carriage of materials.
63Per Mtr.--
... more
Add Extra Item for Supplying tools, labours and materials for painting, numbering and year for construction of T/Well and taking of colour photograph with two or three nearest persons including platform, drain, soak pit and also longitude & latitude, details of T/W such as total depth, casing depth, static water level, drawdown, discharge, strata chart, beneficiary population etc in separate sheet/format all complete as per direction of E/I.
21Each--
... more
COST OF MATERIALS
---
... more
cost of standard I.S.I. mark Deep Well Hand Pump for India mark-II, I.S.I. 15500 (Part 2) / 2004 with latest revision including 12mm x 3 meter long 8 no. Connecting Rods made of bright bar electro-galvanized fitted with coupler & normal stand assembly recommended for use with cylinder assembly suitable for bore well casing pipe.
21Each--
... more
Cost of 32 mm dia GI pipe (Medium) 3 Mtrs long screwed at both ends with seamless socket as per IS:1239(Part 1990).
504Per mtr.--
... more
Cost of 125 mm dia blue UPVC Casing Pipe as per I.S.12818/2016 CML no.- 5543459
315Per Mtrs--
... more
Solar Photovoltaic (SPV) Solar Submersible D.C. Water Motor Pump
---
... more
Designing, Supplying, Installation, Testing & Commissioning with all tools & Parts of following Solar Photovoltaic (SPV) Solar Submersible D.C. Water Motor Pump Suitable for minimum 125mm x 115mm bore well as per MNRE Guideline with following specifications & accessories.
---
... more
SPV arrays contains specified No of same capacity type & specification modules connected to series or parallel to obtained the required voltage & current the power output of individual PV modules should be minimum 200 watt peak.
---
... more
i) The SPV modules should be as per IEC-61215 and IEC 61730 part 1.0)
---
... more
ii) All external parts of motor pump used in submersible pump which are in contact of water is stainless steel grade 303 or higher as required.
---
... more
iii) The PV modules should be mounted on metallic structure of adequate strength and appropriate design which can withstand load of modules & High wind pressure up to 200Km/h.
---
... more
iv) The module mounting structure should be hot dip galvanized according to IS 4759.
---
... more
v) To enhance the performance of SPV water pumping system & arrangement for seasonal tilt angle Adjustment should be provided
---
... more
vi) Necessary arrangement should be provided in controller automatic start-run-stop through out the day with water level detection system. (As per MNRE Specification)
---
... more
vii) Necessary protection such as lightening arrestor etc. should be provided to protect the controller & SPV
---
... more
viii) The suction/delivery pipe shall be UPVC / H.D.P.E. pipes of appropriate size 60m or more as required minimum pressure rating of 8kg/Sq cm- PE 100 grade for pump up to 3HP & 10 Kg/Sq cm- PE 100 grade for 5 HP.
---
... more
ix) All cable used shall be as per IS 694. Suitable size of cable shall be used in sufficient length for inter connection between the SPV array to SPV controller and SPV controller to solar power pump. Provision of cable shall be as per IS 14536.
---
... more
x) The motor pump set should have a 5 years warranty.
---
... more
xi) Control panel suitable for motor pump with arrangement of dry run & over flow protection sensor, float switch & rain prevention box. (As per MNRE Specification)
---
... more
xii) The SPV controller must have IP-65 protection or must be housed in cabinet having at least IP-65 protection.
---
... more
xiii) The system should be as per MNRE guide line & Eco-friendly with suitable arrangement to operate new pump manually.
---
... more
xiv) With third party inspection before dispatch.
---
... more
xv) Fitting, fixing & mounting on water tank steel structure.
---
... more
xvi) Provision for web based remote monitoring of the pumps to be installed must be made through the inbuilt controllers . It should be possible to ascertain the daily water output, the power generated by PV Array ,the Up and down time of the pump during the year, number of days the pump was unused or under breakdown repairs.
---
... more
The following details should be marked indelibly on the motor pump set
---
... more
a) Name of the Manufacturer or Distinctive Logo.
---
... more
b) Model Number.
---
... more
c) Serial Number.
---
... more
Solar submersible motor pump (SPV DC Type)
---
... more
i) 1 HP (DC Pump) with 900 WP minimum watt P.V. Panel as MNRE pump head Max Shut-off head up to 120 mtrs. For higher or lower head or in between various modules output could be decided on prorates basis. (As per latest guide line of MNRE)
21Each--
... more
Carrying out recuperation/Yield Test for ascertaining the discharge of constructed well/ excavated profile as directed by the IEC. The test out by the drawing down water from the well/ profile below normal/subsoil water level up to full depth rise is recorded the normal water level/subsoil water level in the well / profile as well as strainer/level at pump as per design of W.S. scheme shall be recorded prior to the test including cost of all materials, over Load , Labours etc. complete as directed.
21Each--
... more
Supplying all labours, tools and equipments for dismantling of head & water tank assembly and taking out 32 mm dia old G.I. Pipe, connecting rod, cylinder assembly the dismantled components after necessary changing for making the T/W in good condition with all transportation including unused taken out materials back in store all complete job as per direction of E/I.
21Each--
... more
Provision of solar night lamp.
21Each--
... more
Construction RCC Foundation for Steel structure staging & Solar panel
---
... more
Earth work in excavation in foundation trenches in ordinary soil and disposal of excavated earth as obtained to a distance up to 50.0m ,including all lifts, levelling ,ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design ,building specification and direction of E/I (vide classification of soil item -B)
183.96Cum--
... more
Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials ,labour ,royalty and taxes all complete as per building specification and direction of E/I(Mode of measurement compacted volume)
11Cum--
... more
Providing designation 75 A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I
127.05Per M2--
... more
Providing PCC M-150 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M.2.5to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing and royalty all complete as per building specification and direction of E/I
12.71Cum--
... more
Providing RCC M-200 in nominal mix of (1:1.5:3) in columns with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M.2.5to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing and royalty all complete as per building specification and direction of E/I.
---
... more
(a)Foundation for Steel structure staging
---
... more
Footing
17.01Cum--
... more
Vertical Pedestal
7.18Cum--
... more
Tie Beam
5.96Cum--
... more
(b)Foundation for Solar panel
---
... more
Footing
4.24Cum--
... more
Vertical Pedestal
2.56Cum--
... more
Providing for steel reinforcement as per approved design and drawing excluding carriage of T.S. bar to work site cutting, bending with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/I.
---
... more
10 mm Dia
2.1MT--
... more
12 mm Dia
2.1MT--
... more
Carriage of construction materials to work site including loading, unloading & stacking etc. all complete.
---
... more
Cement 20 KM lead
21.42MT--
... more
Steel 20 KM lead
38.24MT--
... more
Stone chips 20 KM lead
45.34Cum--
... more
Sand 20 KM lead
45.34Cum--
... more
Bricks 20 KM lead
4158Each--
... more
Construction of galvanized tubular Steel structure staging for (4.5m) HDPE water storage Tank& Solar Panel.
---
... more
Providing structural steel galvanised tubular hollow section work in trusses, other similar trussed purlins and members with all bracing ,gusset plates etc as per detailed design and drawing or as directed by Engineer- in-charge ,including cutting fabricating ,hoisting , erecting and fixing in position , making riveted/bolted /welded connections and one coat of anticorrosive paint and over it two coat of all oil painting & For Structure(PLUS) Providing and applying materials &labour for hot dip galvanizing of above structure including transportation for galvanizing minimum thickness 80microns (Net wt. of components to be Galv) preferably TATA structural section etc complete.
21036.96Kg--
... more
Providing structural steel work in trusses other similar trussed purlins and members with bracing gusset plates etc as per detailed design and drawing or as directed by Engineer- in-charge including cutting fabricating hoisting erecting and fixing in position making reverted bolted welded connections one coat of anticorrosive paint and over it two coats of oil painting etc complete.
571.2Kg--
... more
Materials and labour for vinyl painting of matter given by department in different color
26.46Sqm--
... more
Installation of 2000 liters Capacity Water Storage Tank
---
... more
Providing and fixing HDPE container Syntex or alike one piecemolded water tank made out of low density polythyler andbuilt corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity 2000.00 litres Capacity Water storage Tank
42000Litrs--
... more
Transportation Charge
21Each--
... more
Lifting of 2000 Litrs Capacity Tank up to 4.5m height with lifting tools with rope and labour
21Each--
... more
Making hole in Tank
84Each--
... more
Making long screw in G.I. pipe including supplying and fitting jam nuts and extra socket etc.
84Each--
... more
Rising and Distribution Network with House Connection up to 10 Nos. including Platform & Stand post
---
... more
Earth work in excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I.
1706.25Per M3--
... more
Dismantling plain cement concrete work including stacking serviceable materials in countable stacks within 15 M lead and disposal of unserviceable materials with all leads all complete.
47.25Per M3--
... more
Providing PCC M-200 with nominal mix of (1:1.5:3) with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of FM 2.5 to 3.0 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, sticking, curing , taxes and royalty all complete as per specification and direction of E/I. for construction of road cutting portion.
47.25P.MT--
... more
Rising Main
---
... more
Manufacture, supply and Delivery of following Nominal dia UPVC column pipes including PVC socket (Coupler),
---
... more
65mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:74.5 to 75.2mm wall Thickness End:9mm to 10.7mm, Barrel 9mm to 10.7 mm, Length: 3Mtrs.Rising main
315M--
... more
50 mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:87.5 to 88.2mm wall Thickness End:9 .8 mm to 11.9mm, Barrel 7.3mm to 9 mm, Length: 3Mtrs. Delivery Pipe
315M--
... more
Distribution Main
---
... more
Providing and supplying High Density Polyethylene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties. PE-80 , PN- 10.
---
... more
63 mm HDPE Pipe
315M--
... more
50 mm HDPE Pipe
1050M--
... more
32 mm HDPE Pipe-
1680M--
... more
20 mm HDPE Pipe-
3150M--
... more
Providing and fixing Gun Metal Gate valve with C I wheel of approved quality(screwed end).
---
... more
65mm dia
21Each--
... more
50 mm dia .
21Each--
... more
Providing and supplying High Density Polyethylene (HDPE ) fittings of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties.
21Job--
... more
Lowering, Laying and Jointing H. D. P. E./M. D.P. E. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS Code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II.
---
... more
For Rising
---
... more
65 mm HDPE Pipe
315M--
... more
50 mm HDPE Pipe
315M--
... more
For Distribution
---
... more
65 mm HDPE Pipe
315M--
... more
50 mm HDPE Pipe
1050M--
... more
32 mm HDPE Pipe
1680M--
... more
20 mm HDPE Pipe
3150M--
... more
15 mm Dia GI Pipe
210M--
... more
Supplying all materials , labour and tools for fixing 15 mm dia G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge.
210M--
... more
Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I.
---
... more
Elbow 15 mm dia.
420Each--
... more
Reducer Socket 20x15 mm dia.
210Each--
... more
Nipple 15 mm dia.
420Each--
... more
Plain Socket 15 mm dia.
420Each--
... more
Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main Including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dm ferrule weight not less than 425 gram.
210Each--
... more
Providing and fixing Gun Metal full way valve of approved quality, all complete, as per specification and direction of E/I.
---
... more
65 mm dia Full way valve
42Each--
... more
50 mm dia and weight not less than 1.5 Kg.
21Each--
... more
Providing and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra socket all complete as per specification and direction of E/I.
---
... more
15 dia and weight not less than 400 Gm
210Each--
... more
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design.With common burnt clay F.P.S.(non modular) bricks of class designation 7.5.
---
... more
Full way valve chamber
21Each--
... more
Supplying materials , labours and equipment's for construction of 0.90M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform with stand post in house including 12 mm thick cement plaster in C.M. (1:4) with neat cement punning over exposed surface all complete job, as per approved design, specification and direction of E/I.
210Each--
... more
Providing brick masonry chamber of inner size 600 x 600 x 450 mm deep for bore well protection having 125 mm thick wall and 75 mm R.C.C cover including cement plaster of exposed surface, etc all complete job.
21Each--
... more
Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge.
1450.26Per M3--
... more
Providing fitting & fixing 32 mm to 50 mm service HDPE saddle all complete job, as per approved design, specification and direction of E/I.
210Each--
... more
Carriage of materials from different sources or departmental stores to work site including loading, transporting, unloading and stacking the materials at work site etc. all complete job. as per direction of E/I.
---
... more
Cement Lead 20 Km (avg.)
16.97MT--
... more
Sand Lead 20 Km (avg.)
26.1Per M3--
... more
Stone Chips Lead 20 Km (avg.)
45.93Per M3--
... more
Steel ReinforCement Lead 20 Km (avg.)
0.32MT--
... more
Bricks Lead 20 Km (avg.)
693Each--
... more
Annual Operation & Maintenance cost based on Existing D/T Well with solar motor pump for 5 years
---
... more
O & M Cost for 1st year
21Per Year--
... more
O & M Cost for 2nd year
21Per Year--
... more
O & M cost for 3rd Year
21Per Year--
... more
O & M cost for 4th Year
21Per Year--
... more
O & M cost for 5th Year
21Per Year--
... more
Provision of one no SIM card & its recharging cost for RMC
105Each--
... more
MODEL-1A WITHOUT SOURCE
---
... more
Solar Photovoltaic (SPV) Solar Submersible D.C. Water Motor Pump
---
... more
Designing, Supplying, Installation, Testing & Commissioning with all tools & Parts of following Solar Photovoltaic (SPV) Solar Submersible D.C. Water Motor Pump Suitable for minimum 125mm x 115mm bore well as per MNRE Guideline with following specifications & accessories.
---
... more
SPV arrays contains specified No of same capacity type & specification modules connected to series or parallel to obtained the required voltage & current the power output of individual PV modules should be minimum 200 watt peak.
---
... more
i) The SPV modules should be as per IEC-61215 and IEC 61730 part 1.0)
---
... more
ii) All external parts of motor pump used in submersible pump which are in contact of water is stainless steel grade 303 or higher as required.
---
... more
iii) The PV modules should be mounted on metallic structure of adequate strength and appropriate design which can withstand load of modules & High wind pressure up to 200Km/h.
---
... more
iv) The module mounting structure should be hot dip galvanized according to IS 4759.
---
... more
v) To enhance the performance of SPV water pumping system & arrangement for seasonal tilt angle Adjustment should be provided
---
... more
vi) Necessary arrangement should be provided in controller automatic start-run-stop through out the day with water level detection system. (As per MNRE Specification)
---
... more
vii) Necessary protection such as lightening arrestor etc. should be provided to protect the controller & SPV
---
... more
viii) The suction/delivery pipe shall be UPVC / H.D.P.E. pipes of appropriate size 60m or more as required minimum pressure rating of 8kg/Sq cm- PE 100 grade for pump up to 3HP & 10 Kg/Sq cm- PE 100 grade for 5 HP.
---
... more
ix) All cable used shall be as per IS 694. Suitable size of cable shall be used in sufficient length for inter connection between the SPV array to SPV controller and SPV controller to solar power pump. Provision of cable shall be as per IS 14536.
---
... more
x) The motor pump set should have a 5 years warranty.
---
... more
xi) Control panel suitable for motor pump with arrangement of dry run & over flow protection sensor, float switch & rain prevention box. (As per MNRE Specification)
---
... more
xii) The SPV controller must have IP-65 protection or must be housed in cabinet having at least IP-65 protection.
---
... more
xiii) The system should be as per MNRE guide line & Eco-friendly with suitable arrangement to operate new pump manually.
---
... more
xiv) With third party inspection before dispatch.
---
... more
xv) Fitting, fixing & mounting on water tank steel structure.
---
... more
xvi) Provision for web based remote monitoring of the pumps to be installed must be made through the inbuilt controllers . It should be possible to ascertain the daily water output, the power generated by PV Array ,the Up and down time of the pump during the year, number of days the pump was unused or under breakdown repairs.
---
... more
The following details should be marked indelibly on the motor pump set
---
... more
a) Name of the Manufacturer or Distinctive Logo.
---
... more
b) Model Number.
---
... more
c) Serial Number.
---
... more
Solar submersible motor pump (SPV DC Type)
---
... more
i) 1 HP (DC Pump) with 900 WP minimum watt P.V. Panel as MNRE pump head Max Shut-off head up to 120 mtrs. For higher or lower head or in between various modules output could be decided on prorates basis. (As per latest guide line of MNRE)
10Each--
... more
Carrying out recuperation/Yield Test for ascertaining the discharge of constructed well/ excavated profile as directed by the IEC. The test out by the drawing down water from the well/ profile below normal/subsoil water level up to full depth rise is recorded the normal water level/subsoil water level in the well / profile as well as strainer/level at pump as per design of W.S. scheme shall be recorded prior to the test including cost of all materials, over Load , Labours etc. complete as directed.
10Each--
... more
Supplying all labours, tools and equipments for dismantling of head & water tank assembly and taking out 32 mm dia old G.I. Pipe, connecting rod, cylinder assembly the dismantled components after necessary changing for making the T/W in good condition with all transportation including unused taken out materials back in store all complete job as per direction of E/I.
10Each--
... more
Provision of solar night lamp.
10Each--
... more
Construction RCC Foundation for Steel structure staging & Solar panel
---
... more
Earth work in excavation in foundation trenches in ordinary soil and disposal of excavated earth as obtained to a distance up to 50.0m ,including all lifts, levelling ,ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design ,building specification and direction of E/I (vide classification of soil item -B)
87.6Cum--
... more
Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials ,labour ,royalty and taxes all complete as per building specification and direction of E/I(Mode of measurement compacted volume)
5.24Cum--
... more
Providing designation 75 A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I
60.5Per M2--
... more
Providing PCC M-150 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M.2.5to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing and royalty all complete as per building specification and direction of E/I
6.05Cum--
... more
Providing RCC M-200 in nominal mix of (1:1.5:3) in columns with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M.2.5to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing and royalty all complete as per building specification and direction of E/I.
---
... more
(a)Foundation for Steel structure staging
---
... more
Footing
8.1Cum--
... more
Vertical Pedestal
3.42Cum--
... more
Tie Beam
2.84Cum--
... more
(b)Foundation for Solar panel
---
... more
Footing
2.02Cum--
... more
Vertical Pedestal
1.22Cum--
... more
Providing for steel reinforcement as per approved design and drawing excluding carriage of T.S. bar to work site cutting, bending with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/I.
---
... more
10 mm Dia
1MT--
... more
12 mm Dia
1MT--
... more
Carriage of construction materials to work site including loading, unloading & stacking etc. all complete.
---
... more
Cement 20 KM lead
10.2MT--
... more
Steel 20 KM lead
18.21MT--
... more
Stone chips 20 KM lead
21.59Cum--
... more
Sand 20 KM lead
33.34Cum--
... more
Bricks 20 KM lead
1980Each--
... more
Construction of galvanized tubular Steel structure staging for (4.5m) HDPE water storage Tank& Solar Panel.
---
... more
Providing structural steel galvanised tubular hollow section work in trusses, other similar trussed purlins and members with all bracing ,gusset plates etc as per detailed design and drawing or as directed by Engineer- in-charge ,including cutting fabricating ,hoisting , erecting and fixing in position , making riveted/bolted /welded connections and one coat of anticorrosive paint and over it two coat of all oil painting & For Structure(PLUS) Providing and applying materials &labour for hot dip galvanizing of above structure including transportation for galvanizing minimum thickness 80microns (Net wt. of components to be Galv) preferably TATA structural section etc complete.
10017.6Kg--
... more
Providing structural steel work in trusses other similar trussed purlins and members with bracing gusset plates etc as per detailed design and drawing or as directed by Engineer- in-charge including cutting fabricating hoisting erecting and fixing in position making reverted bolted welded connections one coat of anticorrosive paint and over it two coats of oil painting etc complete.
272Kg--
... more
Materials and labour for vinyl painting of matter given by department in different color
12.6Sqm--
... more
Installation of 2000 liters Capacity Water Storage Tank
---
... more
Providing and fixing HDPE container Syntex or alike one piecemolded water tank made out of low density polythyler andbuilt corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity 2000.00 litres Capacity Water storage Tank
20000Litrs--
... more
Transportation Charge
10Each--
... more
Lifting of 2000 Litrs Capacity Tank up to 4.5m height with lifting tools with rope and labour
10Each--
... more
Making hole in Tank
40Each--
... more
Making long screw in G.I. pipe including supplying and fitting jam nuts and extra socket etc.
40Each--
... more
Rising and Distribution Network with House Connection up to 10 Nos. including Platform & Stand post
---
... more
Earth work in excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I.
812.5Per M3--
... more
Dismantling plain cement concrete work including stacking serviceable materials in countable stacks within 15 M lead and disposal of unserviceable materials with all leads all complete.
22.5Per M3--
... more
Providing PCC M-200 with nominal mix of (1:1.5:3) with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of FM 2.5 to 3.0 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, sticking, curing , taxes and royalty all complete as per specification and direction of E/I. for construction of road cutting portion.
22.5P.MT--
... more
Rising Main
---
... more
Manufacture, supply and Delivery of following Nominal dia UPVC column pipes including PVC socket (Coupler),
---
... more
65mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:74.5 to 75.2mm wall Thickness End:9mm to 10.7mm, Barrel 9mm to 10.7 mm, Length: 3Mtrs.Rising main
150M--
... more
50 mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:87.5 to 88.2mm wall Thickness End:9 .8 mm to 11.9mm, Barrel 7.3mm to 9 mm, Length: 3Mtrs. Delivery Pipe
150M--
... more
Distribution Main
---
... more
Providing and supplying High Density Polyethylene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties. PE-80 , PN- 10.
---
... more
63 mm HDPE Pipe
150M--
... more
50 mm HDPE Pipe
500M--
... more
32 mm HDPE Pipe-
800M--
... more
20 mm HDPE Pipe-
1500M--
... more
Providing and fixing Gun Metal Gate valve with C I wheel of approved quality(screwed end).
---
... more
65mm dia
10Each--
... more
50 mm dia .
10Each--
... more
Providing and supplying High Density Polyethylene (HDPE ) fittings of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties.
10Job--
... more
Lowering, Laying and Jointing H. D. P. E./M. D.P. E. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS Code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II.
---
... more
For Rising
---
... more
65 mm HDPE Pipe
150M--
... more
50 mm HDPE Pipe
150M--
... more
For Distribution
---
... more
65 mm HDPE Pipe
150M--
... more
50 mm HDPE Pipe
500M--
... more
32 mm HDPE Pipe
800M--
... more
20 mm HDPE Pipe
1500M--
... more
15 mm Dia GI Pipe
100M--
... more
Supplying all materials , labour and tools for fixing 15 mm dia G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge.
100M--
... more
Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I.
---
... more
Elbow 15 mm dia.
200Each--
... more
Reducer Socket 20x15 mm dia.
100Each--
... more
Nipple 15 mm dia.
200Each--
... more
Plain Socket 15 mm dia.
200Each--
... more
Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main Including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dm ferrule weight not less than 425 gram.
100Each--
... more
Providing and fixing Gun Metal full way valve of approved quality, all complete, as per specification and direction of E/I.
---
... more
65 mm dia Full way valve
20Each--
... more
50 mm dia and weight not less than 1.5 Kg.
10Each--
... more
Providing and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra socket all complete as per specification and direction of E/I.
---
... more
15 dia and weight not less than 400 Gm
100Each--
... more
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design.With common burnt clay F.P.S.(non modular) bricks of class designation 7.5.
---
... more
Full way valve chamber
10Each--
... more
Supplying materials , labours and equipment's for construction of 0.90M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform with stand post in house including 12 mm thick cement plaster in C.M. (1:4) with neat cement punning over exposed surface all complete job, as per approved design, specification and direction of E/I.
100Each--
... more
Providing brick masonry chamber of inner size 600 x 600 x 450 mm deep for bore well protection having 125 mm thick wall and 75 mm R.C.C cover including cement plaster of exposed surface, etc all complete job.
10Each--
... more
Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge.
690.6Per M3--
... more
Providing fitting & fixing 32 mm to 50 mm service HDPE saddle all complete job, as per approved design, specification and direction of E/I.
100Each--
... more
Carriage of materials from different sources or departmental stores to work site including loading, transporting, unloading and stacking the materials at work site etc. all complete job. as per direction of E/I.
---
... more
Cement Lead 20 Km (avg.)
8.08MT--
... more
Sand Lead 20 Km (avg.)
12.43Per M3--
... more
Stone Chips Lead 20 Km (avg.)
21.87Per M3--
... more
Steel ReinforCement Lead 20 Km (avg.)
0.15MT--
... more
Bricks Lead 20 Km (avg.)
330Each--
... more
Annual Operation & Maintenance cost based on Existing D/T Well with solar motor pump for 5 years
---
... more
O & M Cost for 1st year
10Per Year--
... more
O & M Cost for 2nd year
10Per Year--
... more
O & M cost for 3rd Year
10Per Year--
... more
O & M cost for 4th Year
10Per Year--
... more
O & M cost for 5th Year
10Per Year--
... more
Provision of one no SIM card & its recharging cost for RMC
50Per Year--
... more
MODEL-1B WITH SOURCE (Drilled T/W 125/115 dia mm, 60M Deep)
---
... more
Tube Well (34 Nos.)
---
... more
Drilling Portion
---
... more
Construction for 115/125 mm dia drilled Tube-Well for drilling in all kinds of soil rock for installation of hand pump with D.T.H Rig machine all complete including supplying all materials, labours, tools, drilling, rigs, air compressor and equipments as well as fuel lubricant for making 125/115 mm dia boring etcand cost of transporting rig machine and other vehicle up to site work as per specification and direction of Engineer-in-charge.
---
... more
(a) Up to 30mtr. Depth bellow G.L. in Rural Areas
1020P/M--
... more
(b) Beyond 30mtr. In Rural Areas
1020P/M--
... more
Providing all equipments and labour for lowering 125mm dia blue UPVC Casing pipe as casing for protecting the side from falling during the process of drilling all complete job including carriage of material to work site.
510P/M--
... more
Supplying labour cement and calcium chloride or bentonite solution and equipments for Grouting to Casing Pipe all complete job including carriage of material to work site as per specification & direction of E/I
34Each--
... more
Supplying all tools, equipments and labour and doing washing, flushing and development of drilled tube well to give clean and clear water all complete as per direction E/I.
17Per Hr.--
... more
Supplying all materials labours and equipment including 125 mm dia GI/CI cap 125 mm dia T/W properly all complete and taking it out as per specification & direction of E/I. (the cap will be property of department)
34Each--
... more
Civil Portion
---
... more
Supplying all tools, equipment, labours and lowering 32 mm dia G.I. (Medium) pipe in DT in 3 mtr. Length all complete job as per direction of E/I. Including carriage of materials.
816Per Mtrs--
... more
Supplying all tools, Labour for fitting and fixing deep well cylinder with necessary connecting rod all complete job as per specification & direction of E/I.
34Each--
... more
Supplying all materials, labours for fitting and fixing of India Mark II Hand Pump with all accessories all job complete as per direction of E/I. Including carriage of materials.
34Each--
... more
Supplying all materials, labours and equipment for constructing PCC (1:2:4) circular platform around each drilled tube well including 12mm thick cement plaster (1:4) with neat cement punning over exposed surface as per UNICEF design etc. all complete. Including carriage of materials.
34Each--
... more
Supplying all materials labour and equipment for constructing PCC (1:2:4) drain as per UNICEF Design etc. all complete .Including carriage of materials.
102Per Mtr.--
... more
Add Extra Item for Supplying tools, labours and materials for painting, numbering and year for construction of T/Well and taking of colour photograph with two or three nearest persons including platform, drain, soak pit and also longitude & latitude, details of T/W such as total depth, casing depth, static water level, drawdown, discharge, strata chart, beneficiary population etc in separate sheet/format all complete as per direction of E/I.
34Each--
... more
COST OF MATERIALS
---
... more
cost of standard I.S.I. mark Deep Well Hand Pump for India mark-II, I.S.I. 15500 (Part 2) / 2004 with latest revision including 12mm x 3 meter long 8 no. Connecting Rods made of bright bar electro-galvanized fitted with coupler & normal stand assembly recommended for use with cylinder assembly suitable for bore well casing pipe.
34Each--
... more
Cost of 32 mm dia GI pipe (Medium) 3 Mtrs long screwed at both ends with seamless socket as per IS:1239(Part 1990).
816Per mtr.--
... more
Cost of 125 mm dia blue UPVC Casing Pipe as per I.S.12818/2016 CML no.- 5543459
510Per Mtrs--
... more
RCC Foundation for Steel structure staging & Solar panel
---
... more
Earth work in excavation in foundation trenches in ordinary soil and disposal of excavated earth as obtained to a distance up to 50.0m ,including all lifts, levelling ,ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design ,building specification and direction of E/I(vide classification of soil item -B)
297.84Per M3--
... more
Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials ,labour ,royalty and taxes all complete as per building specification and direction of E/I
17.68Per M3--
... more
Providing designation 75 A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I
205.7Per M2--
... more
Providing nominal mix PCC of (1:4:8) in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M.2.5to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing and royalty all complete as per building specification and direction of E/I
25.33Per M3--
... more
Providing RCC M-20 in nominal mix of (1:1.5:3) in columns with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M.2.5to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing and royalty all complete as per building specification and direction of E/I.
---
... more
(a)Foundation for Steel structure staging
---
... more
Footing and Vertical Pedestal Raft
80.34Per M3--
... more
Column
24.99Per M3--
... more
Tie Beam
13.26Per M3--
... more
(b)Foundation for Solar panel
---
... more
Footing
6.87Per M3--
... more
Vertical Pedestal
4.15Per M3--
... more
Providing for steel reinforcement as per approved design and drawing excluding carriage of T.S. bar to work site cutting, bending with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/I.
---
... more
(a)Foundation for Steel structure staging
12.24MT--
... more
Carriage of materials from different sources or departmental stores to work site including loading, transporting, unloading and stacking the materials at work site etc. all complete job. as per direction of E/I.
---
... more
Cement Lead 20 Km (avg.)
57.8MT--
... more
Sand Lead 20 Km (avg.)
89.08Per M3--
... more
Stone Chips Lead 20 Km (avg.)
136Per M3--
... more
Steel Reinforcement Lead 20 Km (avg.)
12.24MT--
... more
Bricks Lead 20 Km (avg.)
6664Each--
... more
Galvanized tubular Steel structure staging for HDPE water storage Tank& Solar Panel
---
... more
Providing structural steel galvanised squre pipe section work in trusses, other similar trussed purlins and members with all bracing ,gusset plates etc as per detailed design and drawing or as directed by Engineer- in-charge ,including cutting fabricating ,hoisting , erecting and fixing in position , making riveted/bolted /welded connections and one coat of anticorrosive paint and over it two coat of all oil painting & For Structure(PLUS) Providing and applying materials &labour for hot dip galvanizing of above structure including transportation for galvanizing minimum thickness 80microns (Net wt. of components to be Galv) preferably TATA structural section etc complete.
47296.04Kg--
... more
HARDWARE (L.S.)
5017.72Kg--
... more
Information board for IEC
---
... more
Providing structural steel work in trusses other similar trussed purlins and members with bracing gusset plates etc as per detailed design and drawing or as directed by Engineer- in-charge including cutting fabricating hoisting erecting and fixing in position making reverted bolted welded connections one coat of anticorrosive paint and over it two coats of oil painting etc complete
924.8Kg--
... more
Installation of 5000 liters Capacity Water Storage Tank
---
... more
Providing and fixing HDPE container Syntex or alike one piecemolded water tank made out of low density polythyler andbuilt corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity 5000.00 litres Capacity Water storage Tank
170000Litrs--
... more
Transportation Charge
34Each--
... more
Lifting of 5000 Litrs Capacity Tank up to 4.00m height with lifting tools with rope and labour
34Each--
... more
Making hole in Tank
136Each--
... more
Making long screw in G.I. pipe including supplying and fitting jam nuts and extra socket etc.
136Each--
... more
Rising and Distribution Network with House Connection up to 20 Nos. including Platform & Stand post
---
... more
Earth work in excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I.
5482.5Per M3--
... more
Dismantling plain cement concrete work including stacking serviceable materials in countable stacks within 15 M lead and disposal of unserviceable materials with all leads all complete
127.5Per M3--
... more
Providing PCC M-200 with nominal mix of (1:1.5:3) with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of FM 2.5 to 3.0 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, sticking, curing , taxes and royalty all complete as per specification and direction of E/I. for construction of road cutting portion
127.5Per M3--
... more
Rising Main
---
... more
Manufacture, supply and Delivery of following Nominal dia UPVC column pipes including PVC socket (Coupler),
---
... more
65mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:74.5 to 75.2mm wall Thickness End:9mm to 10.7mm, Barrel 9mm to 10.7 mm, Length: 3Mtrs.Rising main
510M--
... more
50 mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:87.5 to 88.2mm wall Thickness End:9 .8 mm to 11.9mm, Barrel 7.3mm to 9 mm, Length: 3Mtrs. Delivery Pipe
510M--
... more
Distribution
---
... more
Providing and supplying High Density Polyethylene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties.
---
... more
63 mm HDPE Pipe
510M--
... more
50 mm HDPE Pipe
3400M--
... more
32 mm HDPE Pipe
6800M--
... more
20 mm HDPE Pipe
10200M--
... more
Providing and fixing Gun Metal Gate valve with C I wheel of approved quality(screwed end).
---
... more
65mm dia
34Each--
... more
50mm dia
34Each--
... more
Providing and supplying High Density Polyethylene (HDPE ) fittings of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties.
34Job--
... more
Lowering, Laying and Jointing H. D. P. E./M. D.P. E. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS Code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II.
---
... more
For Rising
---
... more
50 mm HDPE Pipe
510M--
... more
65 mm HDPE Pipe
510M--
... more
Distribution
---
... more
65 mm HDPE Pipe
510M--
... more
50 mm HDPE Pipe
3400M--
... more
32 mm HDPE Pipe
6800M--
... more
20 mm HDPE Pipe
10200M--
... more
Providing 15 mm dia. G.I. pipe Tata or equivalent make as per IS 1239 (Part 1/2004) ISI Mark /medium quality in Stand Post.
680P.M--
... more
Supplying all materials , labour and tools for fixing 15 mm dia G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge.
680P.M--
... more
Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I.
---
... more
Elbow 15 mm dia.
1360Each--
... more
Reducer Socket 20x15 mm dia.
680Each--
... more
Nipple 15 mm dia.
1360Each--
... more
Plain Socket 15 mm dia.
1360Each--
... more
Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main Including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dm ferrule weight not less than 425 gram.
680Each--
... more
Providing and fixing Gun Metal full way valve of approved quality, all complete, as per specification and direction of E/I.
---
... more
65 mm dia Full way valve
68Each--
... more
50 mm dia and weight not less than 1.5 Kg.
34Each--
... more
Providing and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra socket all complete as per specification and direction of E/I.
---
... more
15 dia and weight not less than 400 Gm
680Each--
... more
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design.With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. Full way valve chamber
34Each--
... more
Supplying materials , labours and equipment's for construction of 0.90M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform with stand post in house including 12 mm thick cement plaster in C.M. (1:4) with neat cement punning over exposed surface all complete job, as per approved design, specification and direction of E/I.
680Each--
... more
Providing brick masonry chamber of inner size 600 x 600 x 450 mm deep for bore well protection having 125 mm thick wall and 75 mm R.C.C cover including cement plaster of exposed surface, etc all complete job
34Each--
... more
Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge.
4660.04Per M3--
... more
Providing fitting & fixing 32 mm to 50 mm service HDPE saddle all complete job, as per approved design, specification and direction of E/I.
680Each--
... more
Carriage of materials from different sources or departmental stores to work site including loading, transporting, unloading and stacking the materials at work site etc. all complete job. as per direction of E/I.
---
... more
Cement Lead 20 Km (avg.)
27.47MT--
... more
Sand Lead 20 Km (avg.)
42.26Per M3--
... more
Stone Chips Lead 20 Km (avg.)
74.36Per M3--
... more
Steel ReinforCement Lead 20 Km (avg.)
0.51MT--
... more
Bricks Lead 20 Km (avg.)
1122Each--
... more
Solar Photovoltaic (SPV) Solar Submersible D.C. Water Motor Pump
---
... more
Designing, Supplying, Installation, Testing & Commissioning with all tools & Parts of following Solar Photovoltaic (SPV) Solar Submersible D.C. Water Motor Pump Suitable for minimum 125mm x 115mm bore well as per MNRE Guideline with following specifications & accessories.
---
... more
SPV arrays contains specified No of same capacity type & specification modules connected to series or parallel to obtained the required voltage & current the power output of individual PV modules should be minimum 200 watt peak.
---
... more
i) The SPV modules should be as per IEC-61215 and IEC 61730 part 1.0)
---
... more
ii) All external parts of motor pump used in submersible pump which are in contact of water is stainless steel grade 303 or higher as required.
---
... more
iii) The PV modules should be mounted on metallic structure of adequate strength and appropriate design which can withstand load of modules & High wind pressure up to 200Km/h.
---
... more
iv) The module mounting structure should be hot dip galvanized according to IS 4759.
---
... more
v) To enhance the performance of SPV water pumping system & arrangement for seasonal tilt angle Adjustment should be provided
---
... more
vi) Necessary arrangement should be provided in controller automatic start-run-stop through out the day with water level detection system. (As per MNRE Specification)
---
... more
vii) Necessary protection such as lightening arrestor etc. should be provided to protect the controller & SPV
---
... more
viii) The suction/delivery pipe shall be UPVC / H.D.P.E. pipes of appropriate size 60m or more as required minimum pressure rating of 8kg/Sq cm- PE 100 grade for pump up to 3HP & 10 Kg/Sq cm- PE 100 grade for 5 HP.
---
... more
ix) All cable used shall be as per IS 694. Suitable size of cable shall be used in sufficient length for inter connection between the SPV array to SPV controller and SPV controller to solar power pump. Provision of cable shall be as per IS 14536.
---
... more
x) The motor pump set should have a 5 years warranty.
---
... more
xi) Control panel suitable for motor pump with arrangement of dry run & over flow protection sensor, float switch & rain prevention box. (As per MNRE Specification)
---
... more
xii) The SPV controller must have IP-65 protection or must be housed in cabinet having at least IP-65 protection.
---
... more
xiii) The system should be as per MNRE guide line & Eco-friendly with suitable arrangement to operate new pump manually.
---
... more
xiv) With third party inspection before dispatch.
---
... more
xv) Provision for web based remote monitoring of the pumps to be installed must be made through the inbuilt controllers . It should be possible to ascertain the daily water output, the power generated by PV Array ,the Up and down time of the pump during the year, number of days the pump was unused or under breakdown repairs.
---
... more
The following details should be marked indelibly on the motor pump set
---
... more
a) Name of the Manufacturer or Distinctive Logo.
---
... more
b) Model Number.
---
... more
c) Serial Number.
---
... more
Solar submersible motor pump (SPV DC Type)
---
... more
i) 1 HP (DC Pump) with 900 WP minimum watt P.V. Panel as MNRE pump head Max Shut-off head up to 120 mtrs. For higher or lower head or in between various modules output could be decided on prorates basis. (As per latest guide line of MNRE)
34Each--
... more
Carrying out recuperation/Yield Test for ascertaining the discharge of constructed well/ excavated profile as directed by the IEC. The test out by the drawing down water from the well/ profile below normal/subsoil water level up to full depth rise is recorded the normal water level/subsoil water level in the well / profile as well as strainer/level at pump as per design of W.S. scheme shall be recorded prior to the test including cost of all materials, over Load , Labours etc. complete as directed.
34Each--
... more
Supplying all labours, tools and equipments for dismantling of head & water tank assembly and taking out 32 mm dia old G.I. Pipe, connecting rod, cylinder assembly the dismantled components after necessary changing for making the T/W in good condition with all transportation including unused taken out materials back in store all complete job as per direction of E/I. (As per Model Estimate of Solar Energy based Mini WSS. TS done by SE, Ranchi Circle & Circle Gumla dt. 21.05.2019)
34Each--
... more
Provision of solar night lamp.
34Each--
... more
Galvanised Chain-line mess Fencing around Solar Panel where bore well is away from tower
---
... more
Making 30 cm (12") dia bore up to 4M below ground with hand auger of approved quality in ordinary soil (vide classification of soil item-A) true to plum and without eccentricity in any stage of operation and disposal of the exacavated earth up to 50m lead including all lifts all complete as per approved design and direction of E/I.
408P.M--
... more
Providing PCC M-150 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M.2.5 to 3 including screening shuttering, mixing cement concrete in mixer and placing in position, vibrating, curing, taxes and royalty all complete as per building specification direction of E/I.
28.83Per M3--
... more
Labour cost of fitting and fixing Galvanised chain-link mess up height of 2 M including cost of staples (but excluding the cost of cement concete angle iron posts, its cutting and making holes, nuts and bolts) all complete as per specification and direction of E/I.
544Per M2--
... more
Drilling 6mm dia holes in M.S Angle iron for fixing of stables etc. as per building specification and direction of E/I.
1632Each--
... more
Labour cost cutting of M.S Angle iron posts to required length, one end splitted as fish tailed in a length of 150mm complete as per building sepcification and direction of E/I.
272Each--
... more
Supplying, fitting and fixing straining bolts with nut size 22cm*10mm dia tighten the barbed wire with corner post complete as per building specification and direction of E/I.
1632Each--
... more
Supplying, fitting and fixing Galvanised chain -link mess having 3mm thick wire cell type 40 x 40 mm fitted on M.S. angle frame with two diagonals having 25x25x5mm size angle including cost of fabrication, providing necessary bocking arrangement with haskal and domny duly fixed in angle post, applying a priming red lead paint over steel work, taxes excluding the cost of Galvanised chain-link mess all complete.
799P/Kg--
... more
Cost of Galvanised chain-link mess having 3 mm thick wire cell type 40x40 mm not less than 3.1 kg/Sqm
1700P/Kg--
... more
Cost of 50 x50 x6 mm M.S angle
3400P/Kg--
... more
Carriage of materials from different sources or departmental stores to work site including loading, transporting, unloading and stacking the materials at work site etc. all complete job. as per direction of E/I.
---
... more
Cement Lead 20 Km (avg.)
9.35MT--
... more
Sand Lead 20 Km (avg.)
12.99Per M3--
... more
Stone Chips Lead 20 Km (avg.)
25.94Per M3--
... more
Steel ReinforCement Lead 20 Km (avg.)
6.05MT--
... more
Annual Operation & Maintenance cost based on Existing D/T Well with solar motor pump for 5 years
---
... more
O & M Cost for 1st year (Excluding Repair Charges)
34Per Year--
... more
O & M Cost for 2nd year with Annual Repair Charges
34Per Year--
... more
O & M cost for 3rd Year
34Per Year--
... more
O & M cost for 4th Year
34Per Year--
... more
O & M cost for 5th Year
34Per Year--
... more
Provision of one no SIM card & its recharging cost for RMC
170Per Year--
... more
MODEL-1B WITH OUT SOURCE (0 nos)
---
... more
RCC Foundation for Steel structure staging & Solar panel
---
... more
Earth work in excavation in foundation trenches in ordinary soil and disposal of excavated earth as obtained to a distance up to 50.0m ,including all lifts, levelling ,ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design ,building specification and direction of E/I(vide classification of soil item -B)
---
... more
Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials ,labour ,royalty and taxes all complete as per building specification and direction of E/I
---
... more
Providing designation 75 A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I
---
... more
Providing nominal mix PCC of (1:4:8) in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M.2.5to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing and royalty all complete as per building specification and direction of E/I
---
... more
Providing RCC M-20 in nominal mix of (1:1.5:3) in columns with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M.2.5to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing and royalty all complete as per building specification and direction of E/I.
---
... more
(a)Foundation for Steel structure staging
---
... more
Footing and Vertical Pedestal Raft
---
... more
Column
---
... more
Tie Beam
---
... more
(b)Foundation for Solar panel
---
... more
Footing
---
... more
Vertical Pedestal
---
... more
Providing for steel reinforcement as per approved design and drawing excluding carriage of T.S. bar to work site cutting, bending with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/I.
---
... more
(a)Foundation for Steel structure staging
---
... more
Carriage of materials from different sources or departmental stores to work site including loading, transporting, unloading and stacking the materials at work site etc. all complete job. as per direction of E/I.
---
... more
Cement Lead 20 Km (avg.)
---
... more
Sand Lead 20 Km (avg.)
---
... more
Stone Chips Lead 20 Km (avg.)
---
... more
Steel Reinforcement Lead 20 Km (avg.)
---
... more
Bricks Lead 20 Km (avg.)
---
... more
Galvanized tubular Steel structure staging for HDPE water storage Tank& Solar Panel
---
... more
Providing structural steel galvanised squre pipe section work in trusses, other similar trussed purlins and members with all bracing ,gusset plates etc as per detailed design and drawing or as directed by Engineer- in-charge ,including cutting fabricating ,hoisting , erecting and fixing in position , making riveted/bolted /welded connections and one coat of anticorrosive paint and over it two coat of all oil painting & For Structure(PLUS) Providing and applying materials &labour for hot dip galvanizing of above structure including transportation for galvanizing minimum thickness 80microns (Net wt. of components to be Galv) preferably TATA structural section etc complete.
---
... more
HARDWARE (L.S.)
---
... more
Information board for IEC
---
... more
Providing structural steel work in trusses other similar trussed purlins and members with bracing gusset plates etc as per detailed design and drawing or as directed by Engineer- in-charge including cutting fabricating hoisting erecting and fixing in position making reverted bolted welded connections one coat of anticorrosive paint and over it two coats of oil painting etc complete
---
... more
Installation of 5000 liters Capacity Water Storage Tank
---
... more
Providing and fixing HDPE container Syntex or alike one piecemolded water tank made out of low density polythyler andbuilt corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity 5000.00 litres Capacity Water storage Tank
---
... more
Transportation Charge
---
... more
Lifting of 5000 Litrs Capacity Tank up to 4.00m height with lifting tools with rope and labour
---
... more
Making hole in Tank
---
... more
Making long screw in G.I. pipe including supplying and fitting jam nuts and extra socket etc.
---
... more
Rising and Distribution Network with House Connection up to 20 Nos. including Platform & Stand post
---
... more
Earth work in excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I.
---
... more
Dismantling plain cement concrete work including stacking serviceable materials in countable stacks within 15 M lead and disposal of unserviceable materials with all leads all complete
---
... more
Providing PCC M-200 with nominal mix of (1:1.5:3) with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of FM 2.5 to 3.0 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, sticking, curing , taxes and royalty all complete as per specification and direction of E/I. for construction of road cutting portion
---
... more
Rising Main
---
... more
Manufacture, supply and Delivery of following Nominal dia UPVC column pipes including PVC socket (Coupler),
---
... more
65mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:74.5 to 75.2mm wall Thickness End:9mm to 10.7mm, Barrel 9mm to 10.7 mm, Length: 3Mtrs.Rising main
---
... more
50 mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:87.5 to 88.2mm wall Thickness End:9 .8 mm to 11.9mm, Barrel 7.3mm to 9 mm, Length: 3Mtrs. Delivery Pipe
---
... more
Distribution
---
... more
Providing and supplying High Density Polyethylene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties.
---
... more
63 mm HDPE Pipe
---
... more
50 mm HDPE Pipe
---
... more
32 mm HDPE Pipe
---
... more
20 mm HDPE Pipe
---
... more
Providing and fixing Gun Metal Gate valve with C I wheel of approved quality(screwed end).
---
... more
65mm dia
---
... more
50mm dia
---
... more
Providing and supplying High Density Polyethylene (HDPE ) fittings of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties.
---
... more
Lowering, Laying and Jointing H. D. P. E./M. D.P. E. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS Code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II.
---
... more
For Rising
---
... more
50 mm HDPE Pipe
---
... more
65 mm HDPE Pipe
---
... more
Distribution
---
... more
65 mm HDPE Pipe
---
... more
50 mm HDPE Pipe
---
... more
32 mm HDPE Pipe
---
... more
20 mm HDPE Pipe
---
... more
Providing 15 mm dia. G.I. pipe Tata or equivalent make as per IS 1239 (Part 1/2004) ISI Mark /medium quality in Stand Post.
---
... more
Supplying all materials , labour and tools for fixing 15 mm dia G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge.
---
... more
Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I.
---
... more
Elbow 15 mm dia.
---
... more
Reducer Socket 20x15 mm dia.
---
... more
Nipple 15 mm dia.
---
... more
Plain Socket 15 mm dia.
---
... more
Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main Including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dm ferrule weight not less than 425 gram.
---
... more
Providing and fixing Gun Metal full way valve of approved quality, all complete, as per specification and direction of E/I.
---
... more
65 mm dia Full way valve
---
... more
50 mm dia and weight not less than 1.5 Kg.
---
... more
Providing and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra socket all complete as per specification and direction of E/I.
---
... more
15 dia and weight not less than 400 Gm
---
... more
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design.With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. Full way valve chamber
---
... more
Supplying materials , labours and equipment's for construction of 0.90M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform with stand post in house including 12 mm thick cement plaster in C.M. (1:4) with neat cement punning over exposed surface all complete job, as per approved design, specification and direction of E/I.
---
... more
Providing brick masonry chamber of inner size 600 x 600 x 450 mm deep for bore well protection having 125 mm thick wall and 75 mm R.C.C cover including cement plaster of exposed surface, etc all complete job
---
... more
Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge.
---
... more
Providing fitting & fixing 32 mm to 50 mm service HDPE saddle all complete job, as per approved design, specification and direction of E/I.
---
... more
Carriage of materials from different sources or departmental stores to work site including loading, transporting, unloading and stacking the materials at work site etc. all complete job. as per direction of E/I.
---
... more
Cement Lead 20 Km (avg.)
---
... more
Sand Lead 20 Km (avg.)
---
... more
Stone Chips Lead 20 Km (avg.)
---
... more
Steel ReinforCement Lead 20 Km (avg.)
---
... more
Bricks Lead 20 Km (avg.)
---
... more
Solar Photovoltaic (SPV) Solar Submersible D.C. Water Motor Pump
---
... more
Designing, Supplying, Installation, Testing & Commissioning with all tools & Parts of following Solar Photovoltaic (SPV) Solar Submersible D.C. Water Motor Pump Suitable for minimum 125mm x 115mm bore well as per MNRE Guideline with following specifications & accessories.
---
... more
SPV arrays contains specified No of same capacity type & specification modules connected to series or parallel to obtained the required voltage & current the power output of individual PV modules should be minimum 200 watt peak.
---
... more
i) The SPV modules should be as per IEC-61215 and IEC 61730 part 1.0)
---
... more
ii) All external parts of motor pump used in submersible pump which are in contact of water is stainless steel grade 303 or higher as required.
---
... more
iii) The PV modules should be mounted on metallic structure of adequate strength and appropriate design which can withstand load of modules & High wind pressure up to 200Km/h.
---
... more
iv) The module mounting structure should be hot dip galvanized according to IS 4759.
---
... more
v) To enhance the performance of SPV water pumping system & arrangement for seasonal tilt angle Adjustment should be provided
---
... more
vi) Necessary arrangement should be provided in controller automatic start-run-stop through out the day with water level detection system. (As per MNRE Specification)
---
... more
vii) Necessary protection such as lightening arrestor etc. should be provided to protect the controller & SPV
---
... more
viii) The suction/delivery pipe shall be UPVC / H.D.P.E. pipes of appropriate size 60m or more as required minimum pressure rating of 8kg/Sq cm- PE 100 grade for pump up to 3HP & 10 Kg/Sq cm- PE 100 grade for 5 HP.
---
... more
ix) All cable used shall be as per IS 694. Suitable size of cable shall be used in sufficient length for inter connection between the SPV array to SPV controller and SPV controller to solar power pump. Provision of cable shall be as per IS 14536.
---
... more
x) The motor pump set should have a 5 years warranty.
---
... more
xi) Control panel suitable for motor pump with arrangement of dry run & over flow protection sensor, float switch & rain prevention box. (As per MNRE Specification)
---
... more
xii) The SPV controller must have IP-65 protection or must be housed in cabinet having at least IP-65 protection.
---
... more
xiii) The system should be as per MNRE guide line & Eco-friendly with suitable arrangement to operate new pump manually.
---
... more
xiv) With third party inspection before dispatch.
---
... more
xv) Provision for web based remote monitoring of the pumps to be installed must be made through the inbuilt controllers . It should be possible to ascertain the daily water output, the power generated by PV Array ,the Up and down time of the pump during the year, number of days the pump was unused or under breakdown repairs.
---
... more
The following details should be marked indelibly on the motor pump set
---
... more
a) Name of the Manufacturer or Distinctive Logo.
---
... more
b) Model Number.
---
... more
c) Serial Number.
---
... more
Solar submersible motor pump (SPV DC Type)
---
... more
i) 1 HP (DC Pump) with 900 WP minimum watt P.V. Panel as MNRE pump head Max Shut-off head up to 120 mtrs. For higher or lower head or in between various modules output could be decided on prorates basis. (As per latest guide line of MNRE)
---
... more
Carrying out recuperation/Yield Test for ascertaining the discharge of constructed well/ excavated profile as directed by the IEC. The test out by the drawing down water from the well/ profile below normal/subsoil water level up to full depth rise is recorded the normal water level/subsoil water level in the well / profile as well as strainer/level at pump as per design of W.S. scheme shall be recorded prior to the test including cost of all materials, over Load , Labours etc. complete as directed.
---
... more
Supplying all labours, tools and equipments for dismantling of head & water tank assembly and taking out 32 mm dia old G.I. Pipe, connecting rod, cylinder assembly the dismantled components after necessary changing for making the T/W in good condition with all transportation including unused taken out materials back in store all complete job as per direction of E/I. (As per Model Estimate of Solar Energy based Mini WSS. TS done by SE, Ranchi Circle & Circle Gumla dt. 21.05.2019)
---
... more
Provision of solar night lamp.
---
... more
Galvanised Chain-line mess Fencing around Solar Panel where bore well is away from tower
---
... more
Making 30 cm (12") dia bore up to 4M below ground with hand auger of approved quality in ordinary soil (vide classification of soil item-A) true to plum and without eccentricity in any stage of operation and disposal of the exacavated earth up to 50m lead including all lifts all complete as per approved design and direction of E/I.
---
... more
Providing PCC M-150 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M.2.5 to 3 including screening shuttering, mixing cement concrete in mixer and placing in position, vibrating, curing, taxes and royalty all complete as per building specification direction of E/I.
---
... more
Labour cost of fitting and fixing Galvanised chain-link mess up height of 2 M including cost of staples (but excluding the cost of cement concete angle iron posts, its cutting and making holes, nuts and bolts) all complete as per specification and direction of E/I.
---
... more
Drilling 6mm dia holes in M.S Angle iron for fixing of stables etc. as per building specification and direction of E/I.
---
... more
Labour cost cutting of M.S Angle iron posts to required length, one end splitted as fish tailed in a length of 150mm complete as per building sepcification and direction of E/I.
---
... more
Supplying, fitting and fixing straining bolts with nut size 22cm*10mm dia tighten the barbed wire with corner post complete as per building specification and direction of E/I.
---
... more
Supplying, fitting and fixing Galvanised chain -link mess having 3mm thick wire cell type 40 x 40 mm fitted on M.S. angle frame with two diagonals having 25x25x5mm size angle including cost of fabrication, providing necessary bocking arrangement with haskal and domny duly fixed in angle post, applying a priming red lead paint over steel work, taxes excluding the cost of Galvanised chain-link mess all complete.
---
... more
Cost of Galvanised chain-link mess having 3 mm thick wire cell type 40x40 mm not less than 3.1 kg/Sqm
---
... more
Cost of 50 x50 x6 mm M.S angle
---
... more
Carriage of materials from different sources or departmental stores to work site including loading, transporting, unloading and stacking the materials at work site etc. all complete job. as per direction of E/I.
---
... more
Cement Lead 20 Km (avg.)
---
... more
Sand Lead 20 Km (avg.)
---
... more
Stone Chips Lead 20 Km (avg.)
---
... more
Steel ReinforCement Lead 20 Km (avg.)
---
... more
Annual Operation & Maintenance cost based on Existing D/T Well with solar motor pump for 5 years
---
... more
O & M Cost for 1st year (Excluding Repair Charges)
---
... more
O & M Cost for 2nd year with Annual Repair Charges
---
... more
O & M cost for 3rd Year
---
... more
O & M cost for 4th Year
---
... more
O & M cost for 5th Year
---
... more
Provision of one no SIM card & its recharging cost for RMC
---
... more
MODEL- 02 (8000 LITRE 8 METER STAGING)
---
... more
Construction of 125mm x115mm x 90.0 M deep Drilled Tube Well (22 Nos of DT)
---
... more
Supplying all materials, labour and tools and equipment for drilling 125 x 115 mm dia bore well in any kinds of soil and rocks by using D.T.H. super rig machine and ball hammer technology including all technology inclusive of mobilization, demobilization of rigs air compressor all accessories of rigs tools and plant labour etc. all complete job including transportation charge cost of flushing charge, geographical investigation etc. all complete
---
... more
(a) 0.00m Up to 30.00m depth below G.L. In Rural Areas
660P/M--
... more
(b) 30.000m Up to 120.00m depth beyond . In Rural Areas
1320P/M--
... more
Basic rate of 125mmdia Blue UPVC Casing pipe Confirming to I.S.I . latest revision IS(12818)/2016
660P/M--
... more
Supplying all materials, labour and inserting UPVC blue pipe 125 mm internal dia casing pipe for protecting the bore hole in over burden up to hard surface as per IS 12818-1392 with latest revision all complete job with taxes as per specification and direction of E/I.
660P/M--
... more
Supplying labour cement and calcium chloride or bentonite solution and equipment’s for grouting Casing pipe
22Each--
... more
Supplying all tools, equipments and labour and doing washing, flushing and development of drilled tube well to give clean and clear water all complete as per direction E/I.
11P/Hrs.--
... more
Supplying labours and equipment’s including 125mm dia G.I. Cap & fitting and fixing over the casing pipe of bore well properly and taking it out as per direction of E/I.
22Each--
... more
Supplying materials and labours for constructing bore well chamber of 75B designation brick masonry chamber 600mmx450mm and 750mm deep internal dimension having 250mm thickness in cement mortar 1:6 including 12mm cement plaster 1:6 with 600mmx475mm RCC cover with earth work in excavation and 75mm thick PCC(1:3:6) in foundation and refilling all complete as per specification and direction of E/I.
22Each--
... more
2 H.P. D.C. Solar Motor Pump Complete Set
---
... more
Designing, Supplying, Installation, Testing & Commissioning with all tools & Parts of following Solar Photovoltaic (SPV) Solar Submersible D.C. Water Motor Pump Suitable for minimum 125mm x 115mm bore well as per MNRE Guideline with following specifications & accessories.
---
... more
SPV arrays contains specified No of same capacity type & specification modules connected to series or parallel to obtained the required voltage & current the power output of individual PV modules should be minimum 200 watt peak.
---
... more
i) The SPV modules should be as per IEC-61215 and IEC 61730 part 1.0)
---
... more
ii) All external parts of motor pump used in submersible pump which are in contact of water is stainless steel grade 303 or higher as required.
---
... more
iii) The PV modules should be mounted on metallic structure of adequate strength and appropriate design which can withstand load of modules & High wind pressure up to 200Km/h.
---
... more
iv) The module mounting structure should be hot dip galvanized according to IS 4759.
---
... more
v) To enhance the performance of SPV water pumping system & arrangement for seasonal tilt angle Adjustment should be provided
---
... more
vi) Necessary arrangement should be provided in controller automatic start-run-stop through out the day with water level detection system. (As per MNRE Specification)
---
... more
vii) Necessary protection such as lightening arrestor etc. should be provided to protect the controller & SPV
---
... more
viii) The suction/delivery pipe shall be UPVC / H.D.P.E. pipes of appropriate size 60m or more as required minimum pressure rating of 8kg/Sq cm- PE 100 grade for pump up to 3HP & 10 Kg/Sq cm- PE 100 grade for 5 HP.
---
... more
ix) All cable used shall be as per IS 694. Suitable size of cable shall be used in sufficient length for inter connection between the SPV array to SPV controller and SPV controller to solar power pump. Provision of cable shall be as per IS 14536.
---
... more
x) The motor pump set should have a 5 years warranty.
---
... more
xi) Control panel suitable for motor pump with arrangement of dry run & over flow protection sensor, float switch & rain prevention box. (As per MNRE Specification)
---
... more
xii) The SPV controller must have IP-65 protection or must be housed in cabinet having at least IP-65 protection.
---
... more
xiii) The system should be as per MNRE guide line & Ecofriendly with suitable arrangement to operate new pump manually.
---
... more
xiv) With third party inspection before dispatch.
---
... more
xv) Provision for web based remote monitoring of the pumps to be installed must be made through the inbuilt controllers . It should be possible to ascertain the daily water output, the power generated by PV Array ,the Up and down time of the pump during the year, number of days the pump was unused or under breakdown repairs.
---
... more
The following details should be marked indelibly on the motor pump set
---
... more
a) Name of the Manufacturer or Distinctive Logo.
---
... more
b) Model Number.
---
... more
c) Serial Number.
---
... more
Solar submersible motor pump (SPV DC Type)
---
... more
i) 2 HP (DC Pump) with 1800 wp minimum watt P.V. Panel as MNRE pump head Max Shut-off head up to 100 mtrs. For higher or lower head or in between various modules output could be decided on prorates basis. (As per latest guide line of MNRE)
22Each--
... more
Provision of solar night lamp.
22Each--
... more
8000 Litre Capacity R.C.C. Water Tank (2.1x2.1x2.1m Internal size) with 8 M staging having Utility Room at Ground Level
---
... more
Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item-B ) and disposal of excavated earth as obtained to a distance up to 50 m including all lifts,levelling,ramming the foundation trenches, removing roots of trees shrubs all complete as per approved design, building specification and direction of E/I.
442.46Per M3--
... more
Providing P.C.C.M-150 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, mixing cement concrete in mixer and placing in position,vibrating,curing,taxes and royalty all complete as per building specification direction of E/I.
34.89Per M3--
... more
Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, 'plywood form work, bully/steel propups, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)
61.6Per M3--
... more
Providing and casting in situ Cement Concrete of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, 'plywood formwork, bully/steel prop-ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only.Use of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted)
---
... more
G.L to above roof of Utility Room
43.21Per M3--
... more
Column Utility Room, Roof Beam to Tank beam M-25
27.72Per M3--
... more
Column Tank Beam to Tank Roof M-25
7.92Per M3--
... more
Providing and casting in situ Cement Concrete of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, 'plywood formwork, bully/steel prop-ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted)
---
... more
Bracing
25.04Per M3--
... more
Beam of Tank Floor
11.88Per M3--
... more
Providing and casting in situ Cement Concrete of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, 'plywood formwork, bully/steel prop-ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted) (excluding M.S, or Tor reinforcement) For RCC M-300 grade Slabs / Landings / Vertical Walls Section-G-Plain and Reinforced Cement Concrete
---
... more
Tank Floor Roof M-30
90.4Per M3--
... more
Tank Roof Top M-25
21.49Per M3--
... more
Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads including cost of materials,labours,royalityand taxes all complete as per building specification and direction of E/I.(Mode of measurement-compacted volume).
8.45Per M3--
... more
Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes royalty all complete as per building specification and direction of E/I.
87.78Per M2--
... more
Filling in foundation trenches and plinth in layers not exceeding 150mm thick, well watered,rammed,fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50M and lift of 1.5M all complete as per building specifications and direction of E/I.(Mode of measurement-compacted volume).
357.06Per M3--
... more
Providing designation 75 A Brick work in C.M(1:6) in foundation and plinth with approved quality of clean coarse sand of F.M.2 to2.5 including providing 10mm thick mortar joints, cost of screening,scaffolding,raking out joints to 15mm depth,curing,taxes and royalty all complete as per building specification and direction of E/I.
21.54Per M3--
... more
Providing designation 75A Brick work in C.M(1:6) in superstructure with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10mm thick mortar joints, cost of screening,scaffolding,raking out joints 15mm depth,curing,taxes and royalty all complete as per bldg. specification and direction of E/I.
46.53Per M3--
... more
Providing R.C.C.M-200 in nominal mix of (1:1.5:3) in lintel with approved quality of stone chips (20mm to 6mm size) graded and clean coarse of F.M 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating striking, curing(but excluding the cost of reinforcement),taxes and royalty all complete as per building specification and direction of E/I.
1.98Per M3--
... more
Providing av.63 mm thick R.C.C M-200 in nominal mix of (1:1.5:3) chhajja with approved quality of stone chips (20mm to 6mm size) graded and clean coarse sand of F.M 2.5 to 3 including in mixer and placing in position,vibrating,striking,6mm cement plaster(1:4) in ceiling and sides of chhajja with sand of F.M 1.5, curing(but excluding the cost of reinforcement) taxes, and royalty all complete as per building specification and direction of E/I.
1.5Per M3--
... more
Providing T.M.T steel reinforcement of different dia rods as per approved design and drawing including carriage of M.S bars to work site, cutting bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.
22.88MT--
... more
Supplying, fitting and fixing M.S grill made of 20*6 mmM.S flats as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I.
792P/Kg--
... more
Providing and fixing fan hooks of 16 mm dia M.S.bar & 1 meter long bent to required size and shape, placed in position and fixed in the R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/I.
22Each--
... more
Supplying, fitting and fixing 20 gauge G.C.I sheet gate fitted on M.S angle frame of size 60*60*6 mm including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in C/C(1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.
63.36Per M2--
... more
Providing 12 mm cement plaster (1:4) with clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water,scaffolding,taxes and royalty all complete as per building specification and direction of E/I.
1393.92Per M2--
... more
Providing 12 mm cement plaster (1:6) with clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water,scaffolding,taxes and royalty all complete as per building specification and direction of E/I.
865.92Per M2--
... more
Providing 6 mm cement plaster (1:4 ) in ceiling with clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water,scaffolding,taxes and royalty all complete as per building specification and direction of E/I.
239.58Per M2--
... more
Providing 12 mm cement plaster (1:3) with clean coarse sand of F.M 1.5 with floating coat of neat cement in skirting including rounding of junctions with floor,curing,taxes and royalty all complete as per building specification and direction of E/I.
131.34Per M2--
... more
Providing 19 mm water proof cement plaster (1:3) with clean coarse sand of F.M 1.5 with 5% cico or any other approved water proofing compound including cost of screening, curing with all leads and lifts of water,scaffolding,taxes and royalty all complete as per building specification and direction of E/I.
485.1Per M2--
... more
Providing 1.5 mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I.
485.1Per M2--
... more
Providing two coats of snowcem of approved shade and make over old surface including washing, cleaning, sand papering the wall,scaffolding,curing and taxes all complete as per building specification & direction of E/I.
2317.92Per M2--
... more
Extra for each coat of cement wash, distemper paint or snowcem over exterior surface for each consecutive floor above first floor including scaffolding etc all complete as per building specification & direction of E/I.
1452Per M2--
... more
Providing two coats of synthetic enamel paint of approved shade and make over steel surface throughly,scaffolding and taxes all papering including cost of scaffolding and taxes all complete as per building specification & direction of E/I.
142.56Per M2--
... more
Providing and fixing G.I. pipe railing having 1.0 M height consisting 50 x 50 x 6 mm thick M. S. angles as verticals at 1.5 M c/c, and additional posts at every corner with 3 rows of 25 mm dia G.I. pipes of medium class variety as horizontal and painting 3 coats of oil paint over 1 coat of anticorrosive paint of approved colour and shade including cost of all labour, transporting bends to curved shape, etc. complete.
148.5P/M--
... more
Providing and fixing in position M.S. ladder 0.50 M wide consisting of 75 x 10 mm M.S. flats as stringers and 16 mm dia M.S. bars in double rows as steps placed at 25 cm c/c including cost of material and labour involved, welding, anchoring and applying 3 coat of anti-corrosive paint, etc. complete as directed by Engineer-in-charge.
253P/M--
... more
Carriage of materials from different sources or departmental stores to work site including loading, transporting, unloading and stacking the materials at work site etc. all complete job. as per direction of E/I.
---
... more
Cement Lead 20 Km (avg.)
196.55MT--
... more
Sand Lead 20 Km (avg.)
205.35Per M3--
... more
Stone Chips Lead 20 Km (avg.)
259.38Per M3--
... more
Steel ReinforCement Lead 20 Km (avg.)
22.88MT--
... more
Bricks Lead 20 Km (avg.)
30470Each--
... more
Distribution Network & House Connection 20 -40 Nos. including Platform & Stand post
---
... more
Earth work in excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I.
10956Per M3--
... more
Dismantling plain cement concrete work including stacking serviceable materials in countable stacks within 15 M lead and disposal of unserviceable materials with all leads all complete.
123.86Per M3--
... more
Providing PCC M-200 with nominal mix of (1:1.5:3) with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of FM 2.5 to 3.0 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, sticking, curing , taxes and royalty all complete as per specification and direction of E/I.
123.86Per M3--
... more
Rising Main
---
... more
Manufacture, supply and Delivery of following Nominal dia UPVC column pipes including PVC socket (Coupler),
---
... more
65mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:74.5 to 75.2mm wall Thickness End:9mm to 10.7mm, Barrel 9mm to 10.7 mm, Length: 3Mtrs.Rising main
330P.M--
... more
50 mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:87.5 to 88.2mm wall Thickness End:9 .8 mm to 11.9mm, Barrel 7.3mm to 9 mm, Length: 3Mtrs. Delivery Pipe
330P.M--
... more
Distribution
---
... more
Providing and supplying High Density Polyethylene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties. PE-80 , PN- 10
---
... more
65 mm HDPE Pipe
330P.M--
... more
50 mm HDPE Pipe
4400P.M--
... more
32 mm HDPE Pipe
8800P.M--
... more
20 mm HDPE Pipe
13200P.M--
... more
Providing and fixing Gun Metal Gate valve with C I wheel of approved quality(screwed end).
---
... more
65mm dia.
22Each--
... more
50mm dia.
22Each--
... more
Providing and supplying High Density Polyethylene (HDPE ) fittings of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties. PE-80 , PN- 10
22Job--
... more
Lowering, Laying and Jointing H. D. P. E./M. D.P. E. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS Code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II.
---
... more
For Rising
---
... more
65 mm HDPE Pipe
330P.M--
... more
50 mm HDPE Pipe
330P.M--
... more
Distribution
---
... more
65 mm HDPE Pipe
330P.M--
... more
50 mm HDPE Pipe
4400P.M--
... more
32 mm HDPE Pipe
8800P.M--
... more
20 mm HDPE Pipe
13200P.M--
... more
Providing 15 mm dia. G.I. pipe Tata or equivalent make as per IS 1239 (Part 1/2004) ISI Mark /medium quality in Stand Post.
880P.M--
... more
Supplying all materials , labour and tools for fixing 15 mm dia G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge.
880P.M--
... more
Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I.
---
... more
Elbow 15 mm dia.
1760Each--
... more
Reducer Socket 20x15 mm dia.
880Each--
... more
Nipple 15 mm dia.
1760Each--
... more
Plain Socket 15 mm dia.
1760Each--
... more
Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main Including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dm ferrule weight not less than 425 gram.
880Each--
... more
Providing and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra socket all complete as per specification and direction of E/I.
---
... more
15 dia and weight not less than 400 Gm
880Each--
... more
Providing and fixing Gun Metal full way valve of approved quality, all complete, as per specification and direction of E/I.
---
... more
65 mm dia Full way valve
22Each--
... more
50 mm dia and weight not less than 1.5 Kg
22Each--
... more
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design. With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. Full way valve chamber
44Each--
... more
Providing brick masonry chamber of inner size 600 x 600 x 450 mm deep for bore well protection having 125 mm thick wall and 75 mm R.C.C cover including cement plaster of exposed surface, etc all complete job
22Each--
... more
Supplying materials , labours and equipments for construction of 0.90M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform with stand post in house including 12 mm thick cement plaster in C.M. (1:4) with neat cement punning over exposed surface all complete job, as per approved design, specification and direction of E/I.
880Each--
... more
Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge.
9312.6Per M3--
... more
Providing fitting & fixing 32 mm to 50 mm service HDPE saddle all complete job, as per approved design, specification and direction of E/I.
880Each--
... more
Carriage of materials from different sources or departmental stores to work site including loading, transporting, unloading and stacking the materials at work site etc. all complete job. as per direction of E/I.
---
... more
Cement Lead 20 Km (avg.)
17.78MT--
... more
Sand Lead 20 Km (avg.)
27.35Per M3--
... more
Stone Chips Lead 20 Km (avg.)
48.11Per M3--
... more
Steel ReinforCement Lead 20 Km (avg.)
0.33MT--
... more
Bricks Lead 20 Km (avg.)
726Each--
... more
Annual Operation & Maintenance cost based on Existing D/T Well with solar motor pump for 5 years
---
... more
O & M Cost for 1st year (Excluding Repair Charges)
22Each--
... more
O & M Cost for 2nd year with Annual Repair Charges
22Each--
... more
O & M cost for 3rd Year
22Each--
... more
O & M cost for 4th Year
22Each--
... more
O & M cost for 5th Year
22Each--
... more
Provision of one no SIM card & its recharging cost for RMC (01 SIM Each Year)
110Each--
... more
GST @ 12%
1Nos--
... more
Labour Cess @1%
1Nos--
Evaluation Notes How It Works ?
Business Providers

Check Business Providers

Business Seekers

Check Business Seekers

Probable Bidders

  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
https://bidassist.com/pricing/1?referer=Banners
7 DAY
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.
whatsapp chat