Drinking Water And Sanitation Department Tender
... More
Search from across the categories, cities, and authorities to find the latest Jharkhand tenders. Every Jharkhand tender is curated from credible sources of government websites (eProcurement Jharkhand portal) and newspapers, thus ensuring the credibility of the information presented to you. For more information on Jharkhand tender bidder registration, the login process and more read the FAQs section on this page.
Costs
EMD
₹ 11,58,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Summary
Renovation, Strengthening And Beautification Of Old Water Treatment Plant At Rukka"
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_DWSD_100007_1Tender No
DWSD/HEADWORKS/-Renv. 01(iii) /2024-25Tender Authority
Drinking Water And Sanitation Department ViewPurchaser Address
-Website
http://https://jalshakti-ddws.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Earth filling in foundation trenches and plinth in layers not exceeding 150 mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M. and lift of 1.5 M all complete as per building specification and direction of E/l (Mode of measurement compacted volume).
869.98
-
-
... More
Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering texes royalty all complete as per building specification and direction of E/I.
608.1
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3:6 (1 Cement: 3 coarse sand (zone-|||):6 graded stone aggregate 20 mm nominal size)
19.44
-
-
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)
26.93
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
84.49
-
-
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)
56.66
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers
448.02
-
-
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)
27.85
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts
330.38
-
-
... More
Providing designation 75 B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.
125.54
-
-
... More
Providing designation 75A bricks work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10mm thick mortar joint cost of screening material raking out joint to 15mm curing takes and royalty all complete as per building specification and direction of E/I
142.52
-
-
... More
Providing designation 125 mm thick reinforced designation 75 A brickwork in C.M (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, carriage of materials, scaffolding, raking out joints to 15 mm depth, curing, taxes and royalty ( but excluding the cost of reinforcement) all complete as per building specification and direction of E/l.
392.95
-
-
... More
Reinforced cement concrete work in beam, suspended floors,roofs having slop 15 landings, balconies, shelves,chajjas, lintels,band,plain window sills,staircases and sporal stair case above plinth level up to floor five level,excluding the cost of centring,shuttering,finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-|||) : 3 graded stone aggregate 20 mm nominal size)
93.53
-
-
... More
Centring and shuttering including strutting,propping etc. and removal of form for (Lintels,beam plinth beam,girders,bressumers and cantilevers.with water proof ply 12mm thick)
769.56
-
-
... More
Reinforced cement work in arches,archibs,domes,vaults,shell,folded plate and roof having slope more than 15 up to floor five level,excluding the cost of centring,shuttering,finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-|||) : 3 graded stone aggregate 20 mm nominal size)
95.99
-
-
... More
Centring and shuttering including strutting,propping etc. and removal of form for (Suspended floor,roof,landing,balcconies and acces platform with waterr proof ply 12 mm thick)
768.33
-
-
... More
Providing 12mm cement plaster (1:6) with clean coarse sand of F.M 1.5 including screening curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I
1165.01
-
-
... More
Providing 19 mm thick waterproof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved waterproofing compound including screening, curing with all leads and lifts of water, scaffolding taxes, and royalty all complete as per building specification and direction of E/l.
930.82
-
-
... More
Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M 1.5 including screening curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I
768.33
-
-
... More
Supplying, fitting, and fixing good quality, well dressed and well-seasoned sal woodwork in Chaukat in doors, windows, skylight, fanlights, and celestial windows openings, including wedge over clamps all complete including the application of two coats of wood preservative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/l
1.39
-
-
... More
Supplying, fitting, and fixing 35mm thick solid core type decorative single leaf flush door shutter with both sides decorative veneered with blackboard core bent with high-quality phenol formal aldehydes synthetic resin of standard make with Aluminium fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/l.
57.09
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass
/ stainless steel screws, all complete as per
architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
200.75
-
-
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) - Powder coated aluminium (minimum thickness of powdercoating 50 micron)
129.9
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge . (Cost of aluminium snap beading shall be paid in basic item):
114.74
-
-
... More
Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth , carriage of grill to work site, hoisting as per building specification and direction of E/l. (where materials is not supplied by the deptt.)
951.67
-
-
... More
Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing rust , dirt, , scales , smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/l. ( Mode of measurement Area shall be multiplied by the co-efficient as indicated in building specification)
71.38
-
-
... More
Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l.
71.38
-
-
... More
Providing and applying white cement-based putty of the average thickness of 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
2864.16
-
-
... More
Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
930.82
-
-
... More
Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/l.
1933.34
-
-
... More
Providing two coats of synthetic enamel paint over a coat of primer of approved shade and make over new wooden surface after cleaning, removing dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specfication and direction of E/l.
137.01
-
-
... More
Providing 50mm thick cement concrete flooring (1:2:4) with 20 mm to 6mm size graded stone chips finished with flooring coat of neat cement in panels including cost of curing finishing the surface smooth by rubbing with carborandum stone taxes royalty all complete as per building specification and direction of E/I
407.85
-
-
... More
Providing and laying Double charge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colors and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand ), jointing with grey cement slurry @3.3kg/sqm including grouting the joints with white cement and matching pigments, etc, complete Size of Tile 600x600 mm.
765.61
-
-
... More
Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing, polishing, and cost of curing, taxes, and royalty all complete as per building specification and direction of E/l.
173.7
-
-
... More
Providing 18mm thick Granite stone for slab flooring in common circulation area like stair lobby stair case etc. all common of approved size texture and color laid over 20mm thick base of cement mortar (1:4)(cement coarse sand) laid over and joined with grey cement slurry mixed with pigment to match the shade of slab including rubbing to granolithic finish with approved quality of carborandum stone including cost of curing taxes and royalty all complete as per building specification and direction of E/I
76.69
-
-
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
318.96
-
-
... More
Providing Toe steel reinforcement of 8mm dia to 32mm dia rods as approved design and drawing excluding carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (Only Valid for SAIL & TATA STeel)
-
-
-
... More
8mm
7.82
-
-
... More
10mm
7.82
-
-
... More
12mm
23.46
-
-
... More
Waterproofing for old and new roof slab: - Providing and laying waterproofing treatment of roof slab by applying two Component, factory designed, ready to use, acrylic modified flexible material applied with a brush, roller or spray waterproofing coating as per manufacture specification with following steps:- (a) Surface preparation: - providing and cleaning of the concrete surface to remove dust, oil, and grease including removal of existing loose paint/coating, and laitance by cleaning with compressed air and water jet including all materials, labour, tools complete. Ponding test to be done after plugging all outlets and to be checked from soffit to identify seepage, and leakage. On identification of seepage, cement grouting to be done with non-shrink expanding admixture of sika India Pvt. Ltd. / MYK Schomberg / Dr. Fixit/ Fosroc or equivalent. Providing and repairing all corners and joints such as those between the parapet wall and roof slab etc shall be chamfered with 150mm X 150mm fillet with mortar ( cement: sand- 1:4) admixed with an acrylic polymer of sika/ Fosroc/ MYK Schomberg / Dr. Fixit/ Fosroc or equivalent. Before chamfering, a prime coat shall be given with the slurry of acrylic polymer. Repairing surface irregularities, damaged concrete base slab, dead crack if any, with acrylic polymer modification repair mortar including a coat of bonding agent of the same with cement slurry including all material, labour, tools complete.
(b) 1st coat:- Apply 1st coat of two-component acrylic modified, ready to use, flexible cementitious material on the surface dry roof and inside wall of parapet wall up to 600 mm by brush or roller. after 1st coat of application, 45gsm of fiberglass cloth to lay when the first layer is still green. 1st coat should be applied @ 1.50 kg/Sqmt/coat. For measurement will be measured (c) 2nd coat:- To apply the 2nd coat of two-component acrylic modified ready to use, flexible cementitious material right angle to the 1st coat over the glass surface. 2nd coat should be applied @ 0.7 kg /sqm/coat. For measurement, Cheniere treated surface will be measured. After three days of drying the 2nd coat. the rainwater outlet is to be plugged and a ponding test is to be done for 48 hours to identify seepage, leakage from the soffit, and if found necessary rectification is to be done as per the satisfaction of E/C. the waterproof coating is to be protected from damage before screed over it. Waterproofing bond:- Sika top seal 109i / Fosroc brush bond RFX/Dr. Fixit pidiffin 2k / MYK Aquafin TG. Product Performance- chemical base part A: acrylic copolymer, Part B: specially graded cementitious powder density 1.6kg/l (mixed density) at +27 degree c tensile strength ~ 2N/mm2 after 28days (with fiber cloth )( According to ASTM D 2370) pull out bond strength ~ 2N/mm2 (concrete failure) (According to ISO 4624) Slant- Shear Bond strength ~4N/mm2 (According to FIP 5.15) elongation at Break ~35% without Fiber Cloth and 20% with Fiber Cloth (According to ASTM D 2370)
(d) Protection of the treated surface with PCC:- the treated surface should be covered with 25mm/50mm PCC of M-20 grade (1:1.5:3) with proper slope (1:120) toward the rain outlet in Alterna panel of 2mtx2mt keeping 6mm gape between the plane joint integral waterproofing admixture conforming to IS 2645 @ of 100ml per bag of cement to be added in the screed concrete ( paid separately for this item) all corner shall be chamfered with 150mm x 150mm fillet. The rainwater outlet shall be just leveled with the screed concrete to ensure smooth discharge of water- the peripheral gapes between PVC pipe outlet and concrete surface should be packed properly with rich concrete and the peripheral mouth to be sealed with moisture insensitive epoxy putty of sika/ Fosroc/ MYK Schomberg / Dr. Fixit/ Fosroc. For measurement, the entire treated surface will be measured
(e) Groove of PCC surface should be filled with polysulphide sealant. (paid separately) . brand- sika/ Fosroc/ MYK Schomberg / Dr. Fixit/ Fosroc. Warranty for five years.
407.85
-
-
... More
Covering the treated surface with PCC:- 25mm thick Cement Concrete (1:1.5:3) maintaining the slop in 2mt x 2mt panels with approved quality of stone chips of 20 mm to 6 mm size graded and cleaned sand of F.M 2.5 to 3 including screening, shutting and mixing cement in mixture with an admixture of integral waterproofing and placing in position, striking curing, taxes, and royalty all complete as per building specification and direction of E/I. the panel that has been left should be cast the next day. there should be a 6mm gap between panels. Brand- sika_Plastocote plus, MYK Proof WP 10, Fosroc- conplast x 4211C,Dr. Fixit Pidiproof LW+ or Equivalent.
407.85
-
-
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
40.89
-
-
... More
Providing 250mm. wide brick drain in cement mortar (1:6) with av. 250mm. clear depth and 250mm. apron including cost of earthwork involved with 75 mm. ~ cement concrete (1:4:8) over one brick designation 75A flat soling in proper grade and slope at the base, the drain duly plastered in C.M.(1:3) with punning over exposed surface all complete as per building specification and direction of E/l.
67.07
-
-
... More
Carriage of materials
-
-
-
... More
Cement Lead
193.24
-
-
... More
Steel Lead
39.1
-
-
... More
Bricks Lead
148707
-
-
... More
Sand Lead
1191.87
-
-
... More
Stone Chips Lead
314.67
-
-
... More
Construction of Septic Tank
-
-
-
... More
Earth in excavation in foundation trenches in ordinary soil (vide classification of soil item A)and disposal or excavated earth as obtained to a distance up to 50m.including all lifts leveling ramming the foundation trenches removing cooks of tree shrubs all complete as per approved design building specification and direction of E/I
19.63
-
-
... More
Extra for earth work in hard soil as per specification and direction of E/I (vide classification and of soil item B)
19.63
-
-
... More
Providing coarse clean sand filling in foundation trenches or in plinth including ramming and watering in layers no exceeding 150mm thick all lead and lift including cost of all materials labor royalty and taxes all complete as per building specification and direction of E/I ( mode of measurement compacted volume)
1.62
-
-
... More
Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I
16.1
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3:6 (1 Cement: 3 coarse sand (zone-|||):6 graded stone aggregate 20 mm nominal size) (PCC OF BASE)
0.98
-
-
... More
Providing designation 75 A brick work in C.M. (1:4) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.
10.97
-
-
... More
Earth filling in foundation trenches and plinth in layers not exceeding 150 mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation frenches within a lead of 50 M. and lift of 1.5 M all complete as per building specification and direction of E/l (Mode of measurement compacted volume).
14.16
-
-
... More
Providing 12mm cement plaster (1:6) with clean coarse sand of F.M 1.5 including screening curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I
55.98
-
-
... More
Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/l.
55.98
-
-
... More
providing tor steel reinforcement 8mm,10mm,12mm,16mm and 20 mm dia rod as per approved design and drawing excluding carriage off M.S rods (straight or in coils) to work site, cutting, bending and binding with annealed wire with cost of wire removal of rust. placing the rods in position all complete as per building specification and direction of E/I (TMT Fe 500) (SAIL&TATA)
0.1
-
-
... More
Reinforced cement work in arches,archibs,domes,vaults,shell,folded plate and roof having slope more than 15 up to floor five level,excluding the cost of centring,shuttering,finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-|||) : 3 graded stone aggregate 20 mm nominal size) FOR ROOF
1.9
-
-
... More
Centring and shuttering including strutting,propping etc. and removal of form for (Suspended floor,roof,landing,balcconies and acces platform with waterr proof ply 12 mm thick) FOR ROOF
14.87
-
-
... More
Carriage of materials
-
-
-
... More
Cement Lead 10 km
2.91
-
-
... More
Steel Lead 10 km
0.1
-
-
... More
Bricks Lead 8 km
4973
-
-
... More
Sand Lead 20 km
7.33
-
-
... More
Stone Chips Lead 20 km
2.56
-
-
... More
Providing of Electrification Work
-
-
-
... More
Wiring for light point /fan point/ exhaust fan point/ cell bell point, with 1.5 sq. mm FR PVC insulated copper conductor singel core in surface/recessed PVC conduit, with modular type switch, modular plate sutable GI box etc as required
89
-
-
... More
Power Plug wiring in PVC Conduit (2X4 Sq.mm) :- Wiring for light/power plug with 2x4 Sq.mm FR PVC insulated copper conductor songle core cable in surface/recessed PVC conduit along with 1 No. 4 Sq.mm FR PVC insulated copper conductor single core cable for loop earthing etc. as required.
250
-
-
... More
Circuit/Sub-main wiring in PVC Conduit:- Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required.
-
-
-
... More
earth wire
700
-
-
... More
earth wire
700
-
-
... More
earth wire
90
-
-
... More
Supplying and fixing of the following size of PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
20mm
310
-
-
... More
Supplying and fixing of following modular switch / socket on the existing modular plate & switch box including connection but excluding modular plate etc. as required.
-
-
-
... More
one way switch
15
-
-
... More
3 pin socket outlet
15
-
-
... More
S/F Modular type electronic fan regulator -
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
25
-
-
... More
S/F Modular type blanking plate :-
-
-
-
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch excluding modular plate et. As required.
25
-
-
... More
S/F Modular boxes, base & cover plate :-
-
-
-
... More
Supplying and fixing following size / modular, G.I box along with modular base & cover plate for modular switches in recess etc as required.
-
-
-
... More
6 module
10
-
-
... More
8/9 module
34
-
-
... More
Supplying and fixing suitable GI box with modular plate and cover in front on surface of in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch. Connection, painting etc. as required (For light plugs to be used in non residential buildings)
30
-
-
... More
S/F power plug point with modular type accessories:- Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular type switch, connection, painting etc as required.
45
-
-
... More
S/F Ceiling Rose:- Supplying and fixing 2 pin ceiling rose on the existing junction box/ wooden block including connection etc as required.
18
-
-
... More
ITC exhaust fan upto 450 mm.
-
-
-
... More
Installation of exhaust fan up to 450mm sweep in the exisiting opnening, including making the hole t suit the size of the above fan, making good the damge, connection, testing , commissioning etc. as required
10
-
-
... More
S/F T.P. MCB DB - Supplying and fixing following way, three pole and netural, sheet MCB ditribution board, 415 volts, on surface/recess, complete with tinned copper busbar, netural busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
Double door, Horizontal type
3
-
-
... More
Supplying and fixing 6 amps to 32 amps rating, 240 volts, "B" series, miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commossioning etc. as required.
-
-
-
... More
single pole
238
-
-
... More
S/F DP MCB Isolator - Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required
-
-
-
... More
63 amp
6
-
-
... More
G.I. Earth electrode with salt/charcoal - Earthing with G.I. earth pipe 4.5 mtr. Long, 40mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required
4
-
-
... More
S/L 8 SWG copper wire in ground - Supplying and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth, including soldering etc. as required
52
-
-
... More
Providing and fixing of XLPE, Aluminium Armoured PVC Cable confirming to IS IS7908 (Part-1) 1988 0f grade 1.1KV. Make:- Havells / Finolex / Polycab
-
-
-
... More
Supplying PVC/XLPE insulated PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor- 3.5 core, 50 sq.mm
350
-
-
... More
S.I.T.C of floowing rating LED Flood lighting Luminarie with pressure die cas housing and toughend glass cover, IP 66 protection, LUMINOUS EFFICARY ≥ 110 LM/W, with lens in existing pole / pipe for supply voltage 100-270V AC, 50Hz. Luminari shall be confirm to IS 10322 part-5 / section -5 shall be complete with all neccssary as required
-
-
-
... More
9.2.3 75/80W LED Flood light
6
-
-
... More
S.I.T.C of floowing rating reccess/ surface mounted LED round / squre shape Down light luminaria with pressure die cast houshing for single phase supply voltage. Luminari shall be confirm to IS: 10322 part-5/ section-2 or IEC:62722 with all neccssary accessories as required
-
-
-
... More
9.3.2 12W LED Round Down light
58
-
-
... More
Supply Installation, testing and commissioning of follwing size ceiling fan 3 Blades confirming to IS:374:2019 including wiring the down rods of standard length (upto 30cm) with 1.5 sq.mm. FR PVC insulated, copper wire sutable for 230V 50HZ, single phase supply etc. complete as required.
-
-
-
... More
Ceiling Fan
18
-
-
... More
S.I.T.C of floowing rating surface mounted LED tube light fitting suitable for 230V 50HZ, single phase supply etc. complete as required
-
-
-
... More
LED Tube light
25
-
-
... More
Supply 12" dia exhaust fan
10
-
-
... More
S.I.T.C of floowing rating approved make Chandeliers Light Fittings all Complete as required as per direction of E/I.. (excluding plinth charge)
5
-
-
... More
S.I.T.C of floowing rating approved make LED Bollard fitting with cylindrical shape and inverted cone shape head of hight 600 to 850 power input- 8/9watt with die cast aluminum housing opel with PC diffuser., IP:65/54 protection, conferming to IS:10322 Part 5 etc all Complete as required. (excluding plinth charge)
40
-
-
... More
Providing of Plumbing & Sanitary Work
-
-
-
... More
Providing and fixing male ended 15mm dia brass bib cock of approved quality (Wt. not less than 350 gms.) with extra socket all compere as per specification and direction of E/I.
18
-
-
... More
Providing and fixing N.P./C.P. brass/PVC procelain shower rose of 15mm inlet etc. all complete as per specification and direction of E/I.
15
-
-
... More
Providing & fixing 15mm size pillar cock C.I. body brass spindle pillar cock of approved quality as per specification & direction of E/I.
30
-
-
... More
Providing and fixing brass/C.I. stop cock of approved quality all complete as per specification and direction of E/I.
-
-
-
... More
15 mm dia
6
-
-
... More
Providing and fixing G.M. non return valve Horizontal/Vertical type of approved quality as per specification and direction of E/I.
-
-
-
... More
Horizontal - 25 mm dia
4
-
-
... More
Making holes in walls for laying G.I. pipe and restoring the same after pipe laying as per specification and direction of E/I.
-
-
-
... More
125 mm thick wall
8
-
-
... More
250 mm thick wall
10
-
-
... More
Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I.
-
-
-
... More
Mirrors of 6mm thick plate glass bevelled edge mirror including C.P brass revolving fitting 3mm ply board and C.P hinges to fix with mirror. 600mm x 450mm size
6
-
-
... More
C.P. brass tower rail 20 mm x 600mm with bracket container
6
-
-
... More
C.P brass liquid soap container
6
-
-
... More
Supplying, fitting and fixing 40mm highb viterous white glazed earthen E.W.C. with 'P' trap of parry hindustan or any other approved I.S.S. make including supplying and fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fitting with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stope cock of approved quality weight not less than 450 grams 15mm PVC alkathene pipe 45cm. long with brass coupling at both ends and white/black plastic soild state seal and lead of commander/cuckoo or other I.S.S. make with hinges or screws etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide priming all complete as per specification and direction of E/I.
With 'P' trap - 12.5 lit low level PVC Cistern
6
-
-
... More
Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S. approved make supported on pointed C.I. or R.S. brackets 32m C.I. brass waste 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grms. 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I.
10
-
-
... More
Supplying fitting and fixing white glazed fire's clay sink of approved make with overflow arrangment supporting on C.I or R.S. painted bracket 40 mm dia C.P. brass waste with CP brass chain and rubber plug 40 mm dia PVC waste pipe about 750 mm long with brass coupling at one endand 15 mm C.I. body brass spindal bib cock of wall and making good the same etc . all complete as per specification and direction of E/I
2
-
-
... More
Supplying NP2 R.C.C. hume pipe with colour as work site as per direction of E/I.
150mm dia
68
-
-
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
... More
110 mm diameter
120
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
... More
110 mm bend
30
-
-
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement
: 4 coarse sand) and making good the wall etc. complete.
60
-
-
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
15
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall
286
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
412
-
-
... More
Providing and fixing PTMT grating of approved quality and colour.
62
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
6000
-
-
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
2
-
-
... More
Ring Fountain
-
-
-
... More
EC5:C58arthwork in excavation in foundation trenches in ordinary soil (vide classfication of soil item - A) and disposal of excavated earth a obtained to a distance up to 50M including all lifts with leveling ramming the foundation trenches removing roots of trees shurbs all complete as per approved design and per building specification and direction of E/I.
16.46
-
-
... More
Extra for earth work in hard soil as per specification and direction of E/I. (vide classfication of soil item - B)
16.46
-
-
... More
Earth filling in foundation trenches and plinth in layer not exceeding 150mm thick will watered rammed fully compacted and fine dressed with earth obtained from excavation of foundation trenched with a lead of 50mm and lift of 1.5M all complete as per building specification and direction of E/I. (Mode of measurement compacted volume).
21.4
-
-
... More
Providing coarse clean sand in filling in foundation trenches or plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts includng cost of all materials, Labour, rotalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume).
2.42
-
-
... More
Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering texes royalty all complete as per building specification and direction of E/I.
24.07
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3:6 (1 Cement: 3 coarse sand (zone-|||):6 graded stone aggregate 20 mm nominal size)
2.42
-
-
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)
5.47
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers
14.45
-
-
... More
Providing designation 75 B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.
2.7
-
-
... More
Providing 19 mm thick waterproof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved waterproofing compound including screening, curing with all leads and lifts of water, scaffolding taxes, and royalty all complete as per building specification and direction of E/l.
48.02
-
-
... More
Providing and laying Double charge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colors and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand ), jointing with grey cement slurry @3.3kg/sqm including grouting the joints with white cement and matching pigments, etc, complete Size of Tile 600x600 mm.
19.86
-
-
... More
Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing, polishing, and cost of curing, taxes, and royalty all complete as per building specification and direction of E/l.
144.06
-
-
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
38.52
-
-
... More
Providing Toe steel reinforcement of 8mm dia to 32mm dia rods as approved design and drawing excluding carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (Only Valid for SAIL & TATA STeel)
-
-
-
... More
8mm
0.11
-
-
... More
10 mm
0.11
-
-
... More
12 mm
0.33
-
-
... More
Supply of Flower Fountain with 2 Hp Motor set, Light fittings, Control Panels, internal pipelines and all as per direction of E/I.
1
-
-
... More
Carriage of materials
-
-
-
... More
Cement Lead 10 km
8.68
-
-
... More
Steel Lead 10 km
0.55
-
-
... More
Bricks Lead 8 km
3330
-
-
... More
Sand Lead 20 km
17.28
-
-
... More
Stone Chips Lead 20 km
10.61
-
-
... More
Boundry Wall
-
-
-
... More
Earthwork in excavation in foundation trenches in ordinary soil (vide classfication of soil item - A) and disposal of excavated earth a obtained to a distance up to 50M including all lifts with leveling ramming the foundation trenches removing roots of trees shurbs all complete as per approved design and per building specification and direction of E/I.
210.77
-
-
... More
Extra for earth work in hard soil as per specification and direction of E/I. (vide classfication of soil item - B)
210.77
-
-
... More
Earth filling in foundation trenches and plinth in layer not exceeding 150mm thick will watered rammed fully compacted and fine dressed with earth obtained from excavation of foundation trenched with a lead of 50mm and lift of 1.5M all complete as per building specification and direction of E/I. (Mode of measurement compacted volume).
274
-
-
... More
Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering texes royalty all complete as per building specification and direction of E/I.
237.52
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3:6 (1 Cement: 3 coarse sand (zone-|||):6 graded stone aggregate 20 mm nominal size)
23.89
-
-
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)
58.56
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
228.3
-
-
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)
18.22
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers
144.05
-
-
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)
54.81
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts
548.35
-
-
... More
Providing designation 75 B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.
19.38
-
-
... More
Providing designation 75A bricks work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10mm thick mortar joint cost of screening material raking out joint to 15mm curing takes and royalty all complete as per building specification and direction of E/I
147.97
-
-
... More
Providing 12mm cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.
1298.31
-
-
... More
Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding, curing and taxes all complete as per building specification and direction of E/l.
1282.12
-
-
... More
Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) :
26.44
-
-
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
65.04
-
-
... More
Supplying, fitting, and fixing M.S. grill gate with M.S. grills made of 20x6mm M.S. flats or 16mm square bars fitted on 25x25x6mm M.S Angle frame including the cost of fabrication, providing necessary locking arrangement with Haskell and downy duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steelwork, taxes all complete as per drawing specification and direction of E/l. (where steel is not supplied by the depth.)
409.85
-
-
... More
Supply of 50x50x6mm Size MS Angle for concertina Coil fencing
0.85
-
-
... More
Labour for fabrication, erecting, hoisting and fixing in position structural steel work in R.S. joist, shannel, Angel, Tee flat, plate, latice member, built up compound section in column, girder, stair case, or truss including cost of gussel plates, holding down bolts, anchor plates at all heights and depths, bolting, welding (machining wherever necessary) with applying a priming coat of red lead paint all complete as per approved drawing, building specification and direction of E/I.
0.85
-
-
... More
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height ofwall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)
283.54
-
-
... More
Providing primer one coats of red lead paint of approved make over new steel surface including preparing the surface after cleaning removing dirt, scales, smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I (ASIAN BRAND)
20.64
-
-
... More
Providing two coats of painting with synthetic enamel paint over a coat of primer of approved shade and make over steel surface including cleaning the surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I (ASIAN BRAND)
20.64
-
-
... More
Providing Toe steel reinforcement of 8mm dia to 32mm dia rods as approved design and drawing excluding carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (Only Valid for SAIL & TATA STeel)
-
-
-
... More
8 mm
2.92
-
-
... More
10 mm
2.92
-
-
... More
12 mm
8.77
-
-
... More
Carriage of materials
-
-
-
... More
Cement Lead 10 km
80.18
-
-
... More
Steel Lead 10 km
14.62
-
-
... More
Bricks Lead 8 km
67737
-
-
... More
Sand Lead 20 km
140
-
-
... More
Stone Chips Lead 20 km
135.61
-
-
... More
Proving of Landscaping & Horticulture Work
-
-
-
... More
Earthwork in excavation in foundation trenches in ordinary soil (vide classfication of soil item - A) and disposal of excavated earth a obtained to a distance up to 50M including all lifts with leveling ramming the foundation trenches removing roots of trees shurbs all complete as per approved design and per building specification and direction of E/I.
65.12
-
-
... More
Earth filling in foundation trenches and plinth in layers not exceeding 150 mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M. and lift of 1.5 M all complete as per building specification and direction of E/l (Mode of measurement compacted volume).
42.98
-
-
... More
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
427.42
-
-
... More
Supply and staking of good earth at site including royalty and carriage upto 1km
106.2
-
-
... More
Supply and staking of Sludge at site including royalty and carriage upto 1km
37.17
-
-
... More
Providing Cowdung manure or compost manure as per specification and direction of officer in-charge. Lead up 8km
212.4
-
-
... More
Rough dressing the treanches groundincluding breaking clod
697.03
-
-
... More
Fine dressing of the ground
697.03
-
-
... More
spreading of sluge, dump manure and good earth in required thickness as per direction of office in-charge Earth+Slug +Manure (1+2+3)
355.78
-
-
... More
Mixing of earth and sluge or manure in required proportion as specified.
355.78
-
-
... More
Providing and stacking of winter seasonal seedling/ cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 No. plant as per direction of the officer in-charge.
-
-
-
... More
Alyssum
15
-
-
... More
Brachycome
15
-
-
... More
Cineraria
17
-
-
... More
Cosmos hybrid
15
-
-
... More
Dahlia double
10
-
-
... More
Daisy hybrid
10
-
-
... More
Marigold french hybrid dwarf
12
-
-
... More
Marigold Inca hybrid
12
-
-
... More
Pansy hybrid
15
-
-
... More
Poppy double
15
-
-
... More
Cost of Compost
-
-
-
... More
NEEM KHALI
150
-
-
... More
Vermicompost
250
-
-
... More
EDGING WITH BRICK
-
-
-
... More
Earth work excavation in foundation trenches in ordinary soil (vide classification of soil item -A) and disposal of excavated earth as obtained to a distance upto 50M. Including alllifts, levelling, ramming the foundationtrencfhes, removing roots or trees, shurbs all complete as per approved design, building specification and direction of E/I.
3.54
-
-
... More
Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specificatio and direction of E/I. (Mode of measurement compacted volume)
1.77
-
-
... More
Providing designation 125mm th. reinforced designation 75A brick work in cement mortar (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, carriage of materials, scaffolding, raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all cmomplete as per building specification and direction of E/I.
20.91
-
-
... More
Providing 12mm. Thick Cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
25.37
-
-
... More
Colour washing two coat over a coat of white wash over new surface with approved quality of lime including cost of cleaning surface thoroghly and removing the scales of smoke and mosh marks with jhama rubbing, scaffolding, wahing, of floors and taxes all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
25.37
-
-
... More
Carraige of material
-
-
-
... More
Sand
10.9
-
-
... More
Brick
1270
-
-
... More
Construction of Gazebo
-
-
-
... More
Earth work excavation in foundation trenches in ordinary soil (vide classification of soil item -A) and disposal of excavated earth as obtained to a distance upto 50M. Including alllifts, levelling, ramming the foundationtrencfhes, removing roots or trees, shurbs all complete as per approved design, building specification and direction of E/I.
5.3
-
-
... More
Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specificatio and direction of E/I. (Mode of measurement compacted volume)
4.32
-
-
... More
Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.
5.09
-
-
... More
Providing designation 75B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm th. Mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all cmomplete as per building specification and direction of E/I.
2.93
-
-
... More
Providing and laying and position cement concrete of specified grade excluding the cost of centering and shuttering- All work up to plinth level:
0.76
-
-
... More
Providing and laying in position specified grade of reinforced cement concrete , excluding the the cost of of centering , shurttering ,finishing and reinforcement- All work up to plinth level.
1.97
-
-
... More
Providing R.C.C.M-200 with nominal mix of (1:1 1/2:3) in beam of all types with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M.2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing inposition, vibrating, striking, curing (but excluding the cost of reniforcement, taxes and royalty all cmomplete as per building specification and direction of E/I.
8.77
-
-
... More
Reinforced cement concrete work in walls (any thickness), including attached plasters, buttresses, plinth and string course, fillets, columns, pillars, piers, abutments,posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement:
1.68
-
-
... More
Providing plain Tor steel reinforcement 8mm. dia rods as per approved design and drawing excluding carriage of M.S.bars to work site, cutting, bending, and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (Only valid for SAIL & TATA Steel)
0.5
-
-
... More
Providing Tor steel reinforcement 10mm., 12mm. & 16mm. dia bars as per approved design and drawing excluding carriage of M.S.bars to work site, cutting, bending, and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.
-
-
-
... More
(a) 10mm
0.2
-
-
... More
(b) 12mm
0.6
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity..counters, window sills, facias and similar mortar moulding and polishing to edges to give high gloss finish etc. complete mixed with matching pigment, epoxy touch ups, including rubbing, curing, 1:4 (1 cement : 4 coarse sand), joints treated with white cement, locationsapproved shade, colour and texture laid over 20 mm thick base cement of required size,
23.42
-
-
... More
Providing 12mm. Thick Cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
204.02
-
-
... More
Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete.
79.69
-
-
... More
Finishing walls with Acrylic Smooth exterior paint of required shade :
204.02
-
-
... More
Supply ofextra mistri,labour for
-
-
-
... More
labour - Unskilled
50
-
-
... More
Mistri - Gr-II
20
-
-
... More
Head mistry Gr- I
10
-
-
... More
Carrige of materials
-
-
-
... More
Sand
14.66
-
-
... More
Stone chips
21.11
-
-
... More
Brick
160
-
-
... More
Supply of Furniture in InspectionBuilding
-
-
-
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts.
236.66
-
-
... More
Providing 1.5 Tr 5 star split A.C (Inverter Type) IS - 1391- part - I of Daikin, Hitachi, L.G., Voltas or equivalent
6
-
-
... More
Copper tube of size 1/2" for split ac unit 1/1.5/2/3 tr capacity including nitride rubber insulation
40
-
-
... More
5 KVA wall mounted automatic voltage stablizer from range 140 V to 280 V
6
-
-
... More
Drain pipe for AC
60
-
-
... More
Outdoor stand for 1.5 Tr Split AC
6
-
-
... More
Bed
5
-
-
... More
Matresses
5
-
-
... More
Bedsheet
5
-
-
... More
Pillow
10
-
-
... More
Blanket
5
-
-
... More
Wooden Almirah
5
-
-
... More
Providing of Sofa set
-
-
-
... More
4 Seater
2
-
-
... More
2 Seater
2
-
-
... More
1 Seater
4
-
-
... More
Centre Table
2
-
-
... More
Door mat
10
-
-
... More
Floor carpet
400
-
-
... More
Door Pining
10
-
-
... More
Confrence Table of Size 24' X 8' X 2.5'
1
-
-
... More
Mid back Chair
30
-
-
... More
Fibre chair with arm
30
-
-
... More
6 Seater Dining Table with Chair
3
-
-
... More
TV 55"
1
-
-
... More
Curtains
1200
-
-
... More
Refrigerator
1
-
-
... More
Water purifier with chiller
1
-
-
... More
Kitchen ware
1
-
-
... More
Modular Kitchen
1
-
-
... More
Solar Geyser 250 Ltr
1
-
-
... More
Part B
-
-
-
... More
Construction of PCC Road
-
-
-
... More
Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area as per Technical specification
1215
-
-
... More
Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with free lead as per Technical Specification Specification Clause 303.1
1944
-
-
... More
Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401
With Grading-III Material
69
-
-
... More
Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with approve grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing
1215
-
-
... More
Providing and fixing Informatory signboard with 'Logo' as per specification and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25 mm x 5 m size on back on edges. The lower plate will be welded with MS angle iron frame of 25 mmx 25mm x 5 mm. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1
5
-
-
... More
Informatory sign board for showing the overview at a galance near main gate.
1
-
-
... More
Demolition of Main Gate & Guard Room
-
-
-
... More
Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.
7.06
-
-
... More
Dismantling R.C.C work including stacking serviceable materials in countable stacks within 15M lead and disposal of unserviceable materials with all leads all complete as per
direction of E/I.
7.15
-
-
... More
Dismantling lime terracing upto av. 115mm depth with chisel and hammer including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.
9.29
-
-
... More
Construction of Gate & Security Room
-
-
-
... More
Earthwork in excavation in foundation trenches in ordinary soil (vide classfication of soil item - A) and disposal of excavated earth a obtained to a distance up to 50M including all lifts with leveling ramming the foundation trenches removing roots of trees shurbs all complete as per approved design and per building specification and direction of E/I.
31.37
-
-
... More
Extra for earth work in hard soil as per specification and direction of E/I. (vide classfication of soil item - B)
31.37
-
-
... More
Earth filling in foundation trenches and plinth in layer not exceeding 150mm thick will watered rammed fully compacted and fine dressed with earth obtained from excavation of foundation trenched with a lead of 50mm and lift of 1.5M all complete as per building specification and direction of E/I. (Mode of measurement compacted volume).
44.84
-
-
... More
Providing coarse clean sand in filling in foundation trenches or plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts includng cost of all materials, Labour, rotalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume).
3.69
-
-
... More
Providing designation 75 A one brick flat soling joints filled with local sand including cost of watering texes royalty all complete as per building specification and direction of E/I.
36.66
-
-
... More
Providing designation 75B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening maerials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.
0.79
-
-
... More
Providing designation 75A brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints costs of screening materials, scaffolding, raking out joints to 15mm depth curing taxes and royalty all complete as per building specification and direction of E/I.
2.49
-
-
... More
Providing designation 125mm thick reinforced designation 75A brick work in (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening carriage of materials, scaffolding, raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement0 all complete as per building specification and direction of E/I.
6.51
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size)
3.31
-
-
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)
11.52
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
15.41
-
-
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)- PLINTH BEAM
0.26
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers
2.07
-
-
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).-
0.49
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers
3.84
-
-
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).-
2.48
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers
19.9
-
-
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) COLUMN
8.29
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts
71.68
-
-
... More
Supplying, fitting, and fixing good quality, well dressed and well-seasoned sal woodwork in Chaukat in doors, windows, skylight, fanlights, and celestial windows openings, including wedge over clamps all complete including the application of two coats of wood preservative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/l
0.04
-
-
... More
S/F 35mm thick solid core type non-decorative single leaf flush door and windows with black board core banded with high quality phenol formaldehydes synthetic resin both side commercial veneered of standard make with oxidized iron fittings such as hinges, sliding door bolts tower bolts, handles or rings hooks and eyes, cleats sand block as per schedule taxes and royalty all complete as per building and direction of E/I.
2.28
-
-
... More
Providing Toe steel reinforcement of 8mm dia to 32mm dia rods as approved design and drawing excluding carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (Only Valid for SAIL & TATA STeel)
-
-
-
... More
8 mm
1.25
-
-
... More
10 mm
1.25
-
-
... More
12 mm
0.63
-
-
... More
Providing and fixing fan hooks of 16mm dia M.S. bar & 1 meter long, bent torequired size and shape, placed in position and fixed in the R.C.C.slab/beam at the time ofcasting all complete as per building specification and direction of E/I.
1
-
-
... More
Providing and laying Double charge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colors and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand ), jointing with grey cement slurry @3.3kg/sqm including grouting the joints with white cement and matching pigments, etc, complete Size of Tile 600x600 mm.
3.72
-
-
... More
Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I.
10.96
-
-
... More
Providing 19mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
65.8
-
-
... More
Providing 6mm thick cement plaster (1:4) in ceiling with clean of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
3.72
-
-
... More
Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete.
80.48
-
-
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer
applied @ 2.20 kg/ 10 sqm)
65.8
-
-
... More
Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/l.
14.68
-
-
... More
Steel work welded in built up sections/ framed work, including cutting,
hoisting, fixing in position and applying a priming coat of approved steel
primer using structural steel etc. as required.
1398.52
-
-
... More
Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement Area shall be multiplied by the co-efficient as indicated in building specificatio).
17.72
-
-
... More
Providing two coats of synthetic enamel paint of apporoved shade and make over steel surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I.
17.72
-
-
... More
Carriage of materials
-
-
-
... More
Cement Lead
11.32
-
-
... More
Steel Lead
3.13
-
-
... More
Bricks Lead
4097
-
-
... More
Sand Lead
18.32
-
-
... More
Stone Chips Lead
19.82
-
-
... More
Stone Metal Lead
3.11
-
-
... More
Providing Electrification Work
-
-
-
... More
Point wiring in PVC conduit, with piano type switch -
Wiring for light point/exhaust fan point/call bell point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with piano type switch, phenolic laminated sheet, suitable size PVC/G.I. box etc. as required
10
-
-
... More
Power Plug wiring in PVC Conduit (2X4 Sq.mm) :- Wiring for light/power plug with 2x4 Sq.mm FR PVC insulated copper conductor songle core cable in surface/recessed PVC conduit along with 1 No. 4 Sq.mm FR PVC insulated copper conductor single core cable for loop earthing etc. as required.
30
-
-
... More
Circuit/Sub-main wiring in PVC Conduit:- Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required.
-
-
-
... More
earth wire
10
-
-
... More
earth wire
45
-
-
... More
earth wire
10
-
-
... More
piano type switch/socket - Supplying and fixing following piano tyep switch/socket on the existing switch box/cover including connections etc. as required.
-
-
-
... More
one way switch
1
-
-
... More
socket outlet
1
-
-
... More
Modular type electronic fan regulator:- Supplying and fixing stepped (two module) type fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required.
1
-
-
... More
light plug point with piano type accessories - Supplying and fixing suitable size G.I./PVC box on surface or in recess with phenolic liminated sheet cover in front including providing and fixing 5 pin, 5/6 amps socket outlet and 5/6 amps piano tyep switch connection, painting etc. as required.
1
-
-
... More
power plug point with modular type accessories:- Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular type switch, connection, painting etc as required.
1
-
-
... More
Ceiling Rose:- Supplying and fixing 2 pin ceiling rose on the existing junction box/ wooden block including connection etc as required.
10
-
-
... More
ITC fluorescent fitting directly on surface:- Installation, testing and commissioning of Pre-wired fluorescent fitting /compact fluorescent fitting of all types, complete with all accessories and tube etc.directly on surace or ceiling/ wall, including connection with 1.5 Sq. mm. FR PVC insulated, copper conductor, single core cable and earthing etc. as required.
9
-
-
... More
Supplying and fixing 6 amps to rating, 240 volts, 'B' series, miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commossioning etc. as required.
6/32 amps, single pole "B" series
1
-
-
... More
Supplying PVC/XLPE insulated PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor- 3.5 core, 50 sq.mm
50
-
-
... More
Supply Installation, testing and commissioning of follwing size ceiling fan 3 Blades confirming to IS:374:2019 including wiring the down rods of standard length (upto 30cm) with 1.5 sq.mm. FR PVC insulated, copper wire sutable for 230V 50HZ, single phase supply etc. complete as required.
-
-
-
... More
Ceiling Fan
1
-
-
... More
LED Tube light
9
-
-
... More
Part C Renovation of Boundary Wall with Sohray Painting
-
-
-
... More
Demolition of Boundary Wall
-
-
-
... More
Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.
129.19
-
-
... More
Dismantling R.C.C work including stacking serviceable materials in countable stacks within 15M lead and disposal of unserviceable materials with all leads all complete as per
direction of E/I.
36.56
-
-
... More
Construction of new Boundary Wall
-
-
-
... More
Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item - A0 and disposal of excavated earth as obtained to a distance upto 50M including all lifts levelling, ramming the foundation trenches, removing roots of trees, shurbs all complete as per approved design, building specification and direction of E/I.
147.48
-
-
... More
Filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50M and lift of 1.5M all complete as per building specification and direction of E/I. (Mode of measurement compacted volume)
98.32
-
-
... More
Providing coarse clean Sand in Filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I. (Mode of measurement compacted volume).
12.65
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:2:4 (1 Cement: 2 coarse sand (zone-|||):4 graded stone aggregate 20 mm nominal size)
8.61
-
-
... More
Provinding an laying in position specified grade of reinfoced cement concrete, excluding the cost of centering,shuttering,fiishing and reinforcment-All work upto plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-|||) : 3 graded stone aggregate 20 mm nominal size)
35.52
-
-
... More
Reinforced cement concrete work in walls (any thikness), including attached pilasters,butteresses, plinth and string coures,fillets,column,pillers,piers,abutment,post and struts etc. above plinth level up to floor five level,excluding the cost of centring,shuttering,finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-|||) : 3 graded stone aggregate 20 mm nominal size)
14.29
-
-
... More
Centring and shuttering including strutting,propping etc. and removal of form for (finishing Foundation,footing, bases of colunms, etc. For mass concrete)
86.97
-
-
... More
Centring and shuttering including strutting,propping etc. and removal of form for (Columns, pillars,piers,abutment,posts and steuts)
295.35
-
-
... More
Centring and shuttering including strutting,propping etc. and removal of form for (Lintels,beam plinth beam,girders,bressumers and cantilevers.with water proof ply 12mm thick)
127.7
-
-
... More
Providing Toe steel reinforcement of 8mm dia rods as approved design and drawing excluding carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (Only Valid for SAIL & TATA STeel)
-
-
-
... More
8 mm
2.6
-
-
... More
10 mm
1.3
-
-
... More
12 mm
2.6
-
-
... More
Providing designation 75A bricks work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10mm thick mortar joint cost of screening material raking out joint to 15mm curing takes and royalty all complete as per building specification and direction of E/I
129.19
-
-
... More
Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I
176.86
-
-
... More
Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
1173.1
-
-
... More
Carriage of materials
-
-
-
... More
Cement Lead 10km
38.3
-
-
... More
Steel Lead 10 km
6.5
-
-
... More
Bricks Lead 8 km
58155
-
-
... More
Sand Lead 20 km
103.29
-
-
... More
Stone Chips Lead 20 km
50.59
-
-
... More
Rising of Short Boundary Wall
-
-
-
... More
Reinforced cement concrete work in walls (any thikness), including attached pilasters,butteresses, plinth and string coures,fillets,column,pillers,piers,abutment,post and struts etc. above plinth level up to floor five level,excluding the cost of centring,shuttering,finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-|||) : 3 graded stone aggregate 20 mm nominal size)
9.24
-
-
... More
Centring and shuttering including strutting,propping etc. and removal of form for (Columns, pillars,piers,abutment,posts and steuts)
133.68
-
-
... More
Providing Toe steel reinforcement of 8mm dia rods as approved design and drawing excluding carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (Only Valid for SAIL & TATA STeel)
-
-
-
... More
8 mm
0.55
-
-
... More
10 mm
0.28
-
-
... More
12 mm
0.55
-
-
... More
Providing designation 75A bricks work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10mm thick mortar joint cost of screening material raking out joint to 15mm curing takes and royalty all complete as per building specification and direction of E/I
83.97
-
-
... More
Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
825.19
-
-
... More
Carriage of materials
-
-
-
... More
Cement Lead
13.79
-
-
... More
Steel Lead
1.39
-
-
... More
Bricks Lead
34093
-
-
... More
Sand Lead
45.73
-
-
... More
Stone Chips Lead
7.95
-
-
... More
Providing Concertina Wire Fencing
-
-
-
... More
Supply of 50x50x6mm Size MS Angle for concertina Coil fencing
4.16
-
-
... More
Labour for fabrication, erecting, hoisting and fixing in position structural steel work in R.S. joist, shannel, Angel, Tee flat, plate, latice member, built up compound section in column, girder, stair case, or truss including cost of gussel plates, holding down bolts, anchor plates at all heights and depths, bolting, welding (machining wherever necessary) with applying a priming coat of red lead paint all complete as per approved drawing, building specification and direction of E/I.
4.16
-
-
... More
Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement Area shall be multiplied by the co-efficient as indicated in building specificatio).
184.8
-
-
... More
Providing two coats of synthetic enamel paint of apporoved shade and make over steel surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I.
184.8
-
-
... More
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height ofwall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)
1200
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size)
12.36
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
198
-
-
... More
Providing New Gate & Sohray Painting
-
-
-
... More
Supplying, fitting, and fixing M.S. grill gate with M.S. grills made of 20x6mm M.S. flats or 16mm square bars fitted on 25x25x6mm M.S Angle frame including the cost of fabrication, providing necessary locking arrangement with Haskell and downy duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steelwork, taxes all complete as per drawing specification and direction
178.44
-
-
... More
Providing primer one coats of red lead paint of approved make over new steel surface including preparing the surface after cleaning removing dirt, scales, smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction
6.69
-
-
... More
Providing two coats of painting with synthetic enamel paint over a coat of primer of approved shade and make over steel surface including cleaning the surface thoroughly scaffolding and taxes all complete as per building specification and direction of
6.69
-
-
... More
Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction
4350
-
-
... More
Providing two coats of snowcem of approved shade and make over old surface including washing cleaning, and preparing the walls, scaffolding, curing and taxes all complete as per building specification and direction of E/l.
4350
-
-
... More
Providing sohray painting in boundary wall all complete job including material as per direction
2750
-
-
... More
Part D Renovation of clear water pump house & its allied works
-
-
-
... More
Renovation of Pump House
-
-
-
... More
Dismantling old plaster and pointing in cement or lime and raking out joints to 15 mm. depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/l.
527.58
-
-
... More
Dismantling old plaster and pointing in cement or lime and raking out joints to 15 mm. depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/l.
201.1
-
-
... More
Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5with 5% cico or any other approved water proofing compoundincluding taxes and royalty all complete as per building specification and direction of E/l.
728.68
-
-
... More
Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
1005.5
-
-
... More
Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing, cleaning and preparing the walls, scafolding, washing of floor and taxes all complete as per building specification and direction of E/l.
2637.89
-
-
... More
Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l.
13386.39
-
-
... More
Providing sohray painting in boundary wall all complete job including material as per direction of E/I
4312.79
-
-
... More
Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l.
1035.06
-
-
... More
Providing 50 mm thick cement concrete flooring (1:2:4) with 20 mm to 6mm size graded stone chips finished with floating coat of neat cement in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royalty with all complete as per building specification and direction of E/l
530.88
-
-
... More
2MM EPOXY FLOORING : (Product Make- Tri Polarcon Pvt Ltd.) Step 1: Surfacepreparation by mechanical means: Grinding of floor whichever suitable depending onsurface. Step 2: Applying one coat of epoxy primer. Step 3: Applying 1mm epoxy underlayscreed coat. Step 4: Applying 1mm epoxy self-level top coat.
530.88
-
-
... More
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar
160.69
-
-
... More
Providing and laying 15 mm - 23 mm thick kotah stone slab flooring of approved size, texture and colour over 19mm thick base of lime morter (1:1:1) (lime putty : surkhi: coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I.
343.49
-
-
... More
Dismantling R.C.C work including stacking serviceable materials in countable stacks within 15M lead and disposal of unserviceable materials with all leads all complete as per
direction of E/I.
13.59
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
13.59
-
-
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness
for rolling shutters.
17.84
-
-
... More
Supplying, fitting and fixing callapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2 mm at 100mm. centres and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40x40x6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangements, stoppers, handles, including applying a priming coat of red lead paint, carriage , hoisting and taxes all complete as per building specification and direction of E/l.
9.85
-
-
... More
Supplying, fitting, and fixing good quality, well dressed and well-seasoned sal woodwork in Chaukat in doors, windows, skylight, fanlights, and celestial windows openings, including wedge over clamps all complete including the application of two coats of wood preservative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/l
0.2
-
-
... More
Supplying, fitting and fixing 35mm thick solid core type decorative double leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resin of standard make with Aluminium fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/l.
4.23
-
-
... More
Dismantling R.C.C.work including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l.
76.74
-
-
... More
Waterproofing for old and new roof slab: - Providing and laying waterproofing treatment of roof slab by applying two Component, factory designed, ready to use, acrylic modified flexible material applied with a brush, roller or spray waterproofing coating as per manufacture specification with following steps:- (a) Surface preparation: - providing and cleaning of the concrete surface to remove dust, oil, and grease including removal of existing loose paint/coating, and laitance by cleaning with compressed air and water jet including all materials, labour, tools complete. Ponding test to be done after plugging all outlets and to be checked from soffit to identify seepage, and leakage. On identification of seepage, cement grouting to be done with non-shrink expanding admixture of sika India Pvt. Ltd. / MYK Schomberg / Dr. Fixit/ Fosroc or equivalent. Providing and repairing all corners and joints such as those between the parapet wall and roof slab etc shall be chamfered with 150mm X 150mm fillet with mortar ( cement: sand- 1:4) admixed with an acrylic polymer of sika/ Fosroc/ MYK Schomberg / Dr. Fixit/ Fosroc or equivalent. Before chamfering, a prime coat shall be given with the slurry of acrylic polymer. Repairing surface irregularities, damaged concrete base slab, dead crack if any, with acrylic polymer modification repair mortar including a coat of bonding agent of the same with cement slurry including all material, labour, tools complete.
(b) 1st coat:- Apply 1st coat of two-component acrylic modified, ready to use, flexible cementitious material on the surface dry roof and inside wall of parapet wall up to 600 mm by brush or roller. after 1st coat of application, 45gsm of fiberglass cloth to lay when the first layer is still green. 1st coat should be applied @ 1.50 kg/Sqmt/coat. For measurement will be measured (c) 2nd coat:- To apply the 2nd coat of two-component acrylic modified ready to use, flexible cementitious material right angle to the 1st coat over the glass surface. 2nd coat should be applied @ 0.7 kg /sqm/coat. For measurement, Cheniere treated surface will be measured. After three days of drying the 2nd coat. the rainwater outlet is to be plugged and a ponding test is to be done for 48 hours to identify seepage, leakage from the soffit, and if found necessary rectification is to be done as per the satisfaction of E/C. the waterproof coating is to be protected from damage before screed over it. Waterproofing bond:- Sika top seal 109i / Fosroc brush bond RFX/Dr. Fixit pidiffin 2k / MYK Aquafin TG. Product Performance- chemical base part A: acrylic copolymer, Part B: specially graded cementitious powder density 1.6kg/l (mixed density) at +27 degree c tensile strength ~ 2N/mm2 after 28days (with fiber cloth )( According to ASTM D 2370) pull out bond strength ~ 2N/mm2 (concrete failure) (According to ISO 4624) Slant- Shear Bond strength ~4N/mm2 (According to FIP 5.15) elongation at Break ~35% without Fiber Cloth and 20% with Fiber Cloth (According to ASTM D 2370)
(d) Protection of the treated surface with PCC:- the treated surface should be covered with 25mm/50mm PCC of M-20 grade (1:1.5:3) with proper slope (1:120) toward the rain outlet in Alterna panel of 2mtx2mt keeping 6mm gape between the plane joint integral waterproofing admixture conforming to IS 2645 @ of 100ml per bag of cement to be added in the screed concrete ( paid separately for this item) all corner shall be chamfered with 150mm x 150mm fillet. The rainwater outlet shall be just leveled with the screed concrete to ensure smooth discharge of water- the peripheral gapes between PVC pipe outlet and concrete surface should be packed properly with rich concrete and the peripheral mouth to be sealed with moisture insensitive epoxy putty of sika/ Fosroc/ MYK Schomberg / Dr. Fixit/ Fosroc. For measurement, the entire treated surface will be measured
(e) Groove of PCC surface should be filled with polysulphide sealant. (paid separately) . brand- sika/ Fosroc/ MYK Schomberg / Dr. Fixit/ Fosroc. Warranty for five years.
1158.47
-
-
... More
Covering the treated surface with PCC:- 50mm thick Cement Concrete (1:1.5:3) maintaining the slop in 2mt x 2mt panels with approved quality of stone chips of 20 mm to 6 mm size graded and cleaned sand of F.M 2.5 to 3 including screening, shutting and mixing cement in mixture with an admixture of integral waterproofing and placing in position, striking curing, taxes, and royalty all complete as per building specification and direction of E/I. the panel that has been left should be cast the next day. there should be a 6mm gap between panels. Brand- sika_Plastocote plus, MYK Proof WP 10, Fosroc- conplast x 4211C,Dr. Fixit Pidiproof LW+ or Equivalent.
1158.47
-
-
... More
Providing 250mm. wide brick drain in cement mortar (1:6) with av. 250mm. clear depth and 250mm. apron including cost of earthwork involved with 75 mm. ~ cement concrete (1:4:8) over one brick designation 75A flat soling in proper grade and slope at the base, the drain duly plastered in C.M.(1:3) with punning over exposed surface all complete as per building specification and direction of E/l.
40
-
-
... More
Steel work welded in built up sections/ framed work, including cutting,
hoisting, fixing in position and applying a priming coat of approved steel
primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets,
gates and similar works
2921.31
-
-
... More
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal
size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:
2
-
-
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
100
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
50
-
-
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement
: 4 coarse sand) and making good the wall etc. complete.
50
-
-
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
6
-
-
... More
Supplying, fitting and fixing glass panes including supplying putty, beads and nails after taking out old and broken glass panes and disposal of debris all complete as per building specification and direction of E/l.
8.36
-
-
... More
Providing 50x150mm teak wood Handrail with good quality of teak wood of av. 2. 5M. length with smooth finishing and rounded edges properly fitted to the railing including cost of spirit polishing of approved shade and make all complete as per drawing specification and direction of E/l.
6.71
-
-
... More
Supply fitting and fixing lowering 40 mm dia G.L. collumn pipe - do - do - all complete job as per direction of E/I.
15
-
-
... More
Supplying 100 mm dia submersible pump sets confirming to 8034 and motor confirming to IS 9283 pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller. Motor suitable for working on 415 + 10, 3HP, 50 Hz, AC supply with cable guard, thurst carbon/fiber bearing to withstand entire hydraulic thurst, water proof winding shall be provided. The pump set shall be suitable for diret coupling Pump shall have suitable outlet as per manufacturers design. Anti thurst stream lined non return valve shall be provided with pump, 3 meter submersible copper conductor cable in single/double run shall be provided with each pump. Submersible pump set 100mm dia (with Polypropylene/Noryl Impeller) up to 20 stages 1.5 HP
1
-
-
... More
Larsen & Toubro 2 HP Starters Control Panel for Submersible Pump
1
-
-
... More
Supplying fitting and fixing 3 crore 4 sqmm Flat copper submersible cable FINOLEX / HEVELS make including all taxes ,royalty etc all complete job as per direction of E/I.
25
-
-
... More
Carriage of materials
-
-
-
... More
Cement
46.26
-
-
... More
Sand
57.15
-
-
... More
Stone Chips
85.4
-
-
... More
Electrification Work in Pump House
-
-
-
... More
Wiring for light point /fan point/ exhaust fan point/ cell bell point, with 1.5 sq. mm FR PVC insulated copper conductor singel core in surface/recessed PVC conduit, with modular type switch, modular plate sutable GI box etc as required
50
-
-
... More
Power Plug wiring in PVC Conduit (2X4 Sq.mm) :- Wiring for light/power plug with 2x4 Sq.mm FR PVC insulated copper conductor songle core cable in surface/recessed PVC conduit along with 1 No. 4 Sq.mm FR PVC insulated copper conductor single core cable for loop earthing etc. as required.
180
-
-
... More
Circuit/Sub-main wiring in PVC Conduit:- Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required.
-
-
-
... More
earth wire
110
-
-
... More
earth wire
60
-
-
... More
earth wire
40
-
-
... More
Supplying and fixing of the following size of PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
20mm
180
-
-
... More
Modular type electronic fan regulator -
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
3
-
-
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch excluding modular plate et. As required.
10
-
-
... More
Supplying and fixing following size / modular, G.I box along with modular base & cover plate for modular switches in recess etc as required.
10
-
-
... More
Supplying and fixing suitable GI box with modular plate and cover in front on surface of in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch. Connection, painting etc. as required (For light plugs to be used in non residential buildings)
5
-
-
... More
power plug point with modular type accessories:- Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular type switch, connection, painting etc as required.
10
-
-
... More
Ceiling Rose:- Supplying and fixing 2 pin ceiling rose on the existing junction box/ wooden block including connection etc as required.
50
-
-
... More
Installation of exhaust fan up to 450mm sweep in the exisiting opnening, including making the hole t suit the size of the above fan, making good the damge, connection, testing , commissioning etc. as required
2
-
-
... More
T.P. MCB DB - Supplying and fixing following way, three pole and netural, sheet MCB ditribution board, 415 volts, on surface/recess, complete with tinned copper busbar, netural busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
2
-
-
... More
Supplying and fixing 6 amps to 32 amps rating, 240 volts, "B" series, miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commossioning etc. as required.
15
-
-
... More
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required
2
-
-
... More
G.I. Earth electrode with salt/charcoal - Earthing with G.I. earth pipe 4.5 mtr. Long, 40mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required
4
-
-
... More
S/L 8 SWG copper wire in ground - Supplying and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth, including soldering etc. as required
48
-
-
... More
S.I.T.C of floowing rating LED Flood lighting Luminarie with pressure die cas housing and toughend glass cover, IP 66 protection, LUMINOUS EFFICARY ≥ 110 LM/W, with lens in existing pole / pipe for supply voltage 100-270V AC, 50Hz. Luminari shall be confirm to IS 10322 part-5 / section -5 shall be complete with all neccssary as required
4
-
-
... More
Supply Installation, testing and commissioning of follwing size ceiling fan 3 Blades confirming to IS:374:2019 including wiring the down rods of standard length (upto 30cm) with 1.5 sq.mm. FR PVC insulated, copper wire sutable for 230V 50HZ, single phase supply etc. complete as required.
3
-
-
... More
S.I.T.C of floowing rating surface mounted LED tube light fitting suitable for 230V 50HZ, single phase supply etc. complete as required
20
-
-
... More
Supply Installation, testing and commissioning of Industrial type 80 W LED COB High Bay Light Fittings as per direction of E/I.
25
-
-
... More
Providing and fixing following capacity busbar chamber with 4 strip of length 300mm made of copper suitable for following capacity complete with all accessories including connection, earting the body etc. as
-
-
-
... More
100amps
4
-
-
... More
Supply 12" dia exhaust fan etc.
2
-
-
... More
Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.
-
-
-
... More
450 mm
150
-
-
... More
600 mm
385
-
-
... More
750 mm
150
-
-
... More
Supplying and installing following size of perforated painted with powder coating M.S. cable trays bends with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.
-
-
-
... More
450 mm
20
-
-
... More
600 mm
38
-
-
... More
750 mm
10
-
-
... More
Supplying and installing following size of perforated painted with powder coating M.S. cable trays Tee with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.
-
-
-
... More
450 mm
4
-
-
... More
600 mm
10
-
-
... More
750 mm
2
-
-
... More
Laying of one number PILCA/ PVC insulated and PVC sheathed/ XLPE power cable of grade exceeding 1.1 K.V but not exceeding 11 KV of size not exceeding 120 sq mm in existing RCC/HUME/STONEW/METAL pipe as required.
650
-
-
... More
Laying of one number PILCA/ PVC insulated and PVC sheathed/ XLPE power cable of grade exceeding 1.1 K.V but not exceeding 11 KV of size not exceeding 400 sq mm in existing RCC/HUME/STONEW/METAL pipe as required.
1075
-
-
... More
Electrician Grade - I
10
-
-
... More
Electrician Grade - II
30
-
-
... More
Supplying XLPE insulated PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor 1.1 KV of Size - 3.5 core, 50 sq.mm
70
-
-
... More
Supplying XLPE insulated PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor 1.1 KV of Size - 3.5 core, 95 sq.mm
50
-
-
... More
Supplying XLPE insulated PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor 1.1 KV of Size - 3.5 core, 150 sq.mm
150
-
-
... More
Supplying XLPE insulated PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor 1.1 KV of Size - 3.5 core, 185 sq.mm
125
-
-
... More
Supplying XLPE insulated PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor 1.1 KV of Size - 3.5 core, 240 sq.mm
100
-
-
... More
Part E Renovation of filter house & its allied works
-
-
-
... More
Renovation of Filter House
-
-
-
... More
Dismantling old plaster and pointing in cement or lime and raking out joints to 15 mm. depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/l.
2287.11
-
-
... More
Dismantling old plaster and pointing in cement or lime and raking out joints to 15 mm. depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/l.
1923.26
-
-
... More
Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5with 5% cico or any other approved water proofing compoundincluding taxes and royalty all complete as per building specification and direction
4210.36
-
-
... More
Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
9616.28
-
-
... More
Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing, cleaning and preparing the walls, scafolding, washing of floor and taxes all complete as per building specification and direction
11435.53
-
-
... More
Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth , carriage of grill to work site, hoisting as per building specification and direction
9654.28
-
-
... More
Supplying, fitting and fixing callapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2 mm at 100mm. centres and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40x40x6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangements, stoppers, handles, including applying a priming coat of red lead paint, carriage , hoisting and taxes all complete as per building specification and direction
8.92
-
-
... More
Supplying, fitting and fixing fully glazed steel door, windows or ventilations of standard rolled 'Z' and mullion steel sections and size as per IS-1038 joints met and welded with 100x16x3mm M.S. lugs fixed in cement concrete (1:2:4) blocks 15x10x10 cm size including cost of oxidised iron fittings, with hinges, handle per steps, catch springs, 3mm thick plain glass panes with Aluminimum beads and inner frame fixed with lugs with 20mm long 6.3mm G.I. counter sunk machine screw and nuts and applying a coat of red lead paint carriage to work site hoisting and placing in position in all storys and taxes all complete as per building specification and direction
428.81
-
-
... More
Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l.
18881.6
-
-
... More
Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l.
1619.42
-
-
... More
Providing 50 mm thick cement concrete flooring (1:2:4) with 20 mm to 6mm size graded stone chips finished with floating coat of neat cement in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royalty with all complete as per building specification and direction of E/l
1521.84
-
-
... More
2MM EPOXY FLOORING : (Product Make- Tri Polarcon Pvt Ltd.) Step 1: Surfacepreparation by mechanical means: Grinding of floor whichever suitable depending onsurface. Step 2: Applying one coat of epoxy primer. Step 3: Applying 1mm epoxy underlayscreed coat. Step 4: Applying 1mm epoxy self-level top coat.
1521.84
-
-
... More
Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing, polishing, and cost of curing, taxes, and royalty all complete as per building specification and direction of E/l.
97.58
-
-
... More
Dismantling R.C.C.work including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l.
231.88
-
-
... More
Waterproofing for old and new roof slab: - Providing and laying waterproofing treatment of roof slab by applying two Component, factory designed, ready to use, acrylic modified flexible material applied with a brush, roller or spray waterproofing coating as per manufacture specification with following steps:- (a) Surface preparation: - providing and cleaning of the concrete surface to remove dust, oil, and grease including removal of existing loose paint/coating, and laitance by cleaning with compressed air and water jet including all materials, labour, tools complete. Ponding test to be done after plugging all outlets and to be checked from soffit to identify seepage, and leakage. On identification of seepage, cement grouting to be done with non-shrink expanding admixture of sika India Pvt. Ltd. / MYK Schomberg / Dr. Fixit/ Fosroc or equivalent. Providing and repairing all corners and joints such as those between the parapet wall and roof slab etc shall be chamfered with 150mm X 150mm fillet with mortar ( cement: sand- 1:4) admixed with an acrylic polymer of sika/ Fosroc/ MYK Schomberg / Dr. Fixit/ Fosroc or equivalent. Before chamfering, a prime coat shall be given with the slurry of acrylic polymer. Repairing surface irregularities, damaged concrete base slab, dead crack if any, with acrylic polymer modification repair mortar including a coat of bonding agent of the same with cement slurry including all material, labour, tools complete.
(b) 1st coat:- Apply 1st coat of two-component acrylic modified, ready to use, flexible cementitious material on the surface dry roof and inside wall of parapet wall up to 600 mm by brush or roller. after 1st coat of application, 45gsm of fiberglass cloth to lay when the first layer is still green. 1st coat should be applied @ 1.50 kg/Sqmt/coat. For measurement will be measured (c) 2nd coat:- To apply the 2nd coat of two-component acrylic modified ready to use, flexible cementitious material right angle to the 1st coat over the glass surface. 2nd coat should be applied @ 0.7 kg /sqm/coat. For measurement, Cheniere treated surface will be measured. After three days of drying the 2nd coat. the rainwater outlet is to be plugged and a ponding test is to be done for 48 hours to identify seepage, leakage from the soffit, and if found necessary rectification is to be done as per the satisfaction of E/C. the waterproof coating is to be protected from damage before screed over it. Waterproofing bond:- Sika top seal 109i / Fosroc brush bond RFX/Dr. Fixit pidiffin 2k / MYK Aquafin TG. Product Performance- chemical base part A: acrylic copolymer, Part B: specially graded cementitious powder density 1.6kg/l (mixed density) at +27 degree c tensile strength ~ 2N/mm2 after 28days (with fiber cloth )( According to ASTM D 2370) pull out bond strength ~ 2N/mm2 (concrete failure) (According to ISO 4624) Slant- Shear Bond strength ~4N/mm2 (According to FIP 5.15) elongation at Break ~35% without Fiber Cloth and 20% with Fiber Cloth (According to ASTM D 2370)
(d) Protection of the treated surface with PCC:- the treated surface should be covered with 25mm/50mm PCC of M-20 grade (1:1.5:3) with proper slope (1:120) toward the rain outlet in Alterna panel of 2mtx2mt keeping 6mm gape between the plane joint integral waterproofing admixture conforming to IS 2645 @ of 100ml per bag of cement to be added in the screed concrete ( paid separately for this item) all corner shall be chamfered with 150mm x 150mm fillet. The rainwater outlet shall be just leveled with the screed concrete to ensure smooth discharge of water- the peripheral gapes between PVC pipe outlet and concrete surface should be packed properly with rich concrete and the peripheral mouth to be sealed with moisture insensitive epoxy putty of sika/ Fosroc/ MYK Schomberg / Dr. Fixit/ Fosroc. For measurement, the entire treated surface will be measured
(e) Groove of PCC surface should be filled with polysulphide sealant. (paid separately) . brand- sika/ Fosroc/ MYK Schomberg / Dr. Fixit/ Fosroc. Warranty for five years.
3500.23
-
-
... More
Covering the treated surface with PCC:- 50mm thick Cement Concrete (1:1.5:3) maintaining the slop in 2mt x 2mt panels with approved quality of stone chips of 20 mm to 6 mm size graded and cleaned sand of F.M 2.5 to 3 including screening, shutting and mixing cement in mixture with an admixture of integral waterproofing and placing in position, striking curing, taxes, and royalty all complete as per building specification and direction of E/I. the panel that has been left should be cast the next day. there should be a 6mm gap between panels. Brand- sika_Plastocote plus, MYK Proof WP 10, Fosroc- conplast x 4211C,Dr. Fixit Pidiproof LW+ or Equivalent.
3500.23
-
-
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
150
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
75
-
-
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement
: 4 coarse sand) and making good the wall etc. complete.
75
-
-
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
10
-
-
... More
Carriage of materials
-
-
-
... More
Cement Lead - 10 KM
124.01
-
-
... More
Sand Lead - 20 KM
166.76
-
-
... More
Stone Chips Lead - 20 KM
218.99
-
-
... More
Electrification Work in Filter House
-
-
-
... More
Wiring for light point /fan point/ exhaust fan point/ cell bell point, with 1.5 sq. mm FR PVC insulated copper conductor singel core in surface/recessed PVC conduit, with modular type switch, modular plate sutable GI box etc as required
114
-
-
... More
Power Plug wiring in PVC Conduit (2X4 Sq.mm) :- Wiring for light/power plug with 2x4 Sq.mm FR PVC insulated copper conductor songle core cable in surface/recessed PVC conduit along with 1 No. 4 Sq.mm FR PVC insulated copper conductor single core cable for loop earthing etc. as required.
350
-
-
... More
Circuit/Sub-main wiring in PVC Conduit:- Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required.
-
-
-
... More
earth wire
550
-
-
... More
earth wire
275
-
-
... More
earth wire
225
-
-
... More
Supplying and fixing of the following size of PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.
300
-
-
... More
Modular type electronic fan regulator -
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
2
-
-
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch excluding modular plate et. As required.
20
-
-
... More
Supplying and fixing following size / modular, G.I box along with modular base & cover plate for modular switches in recess etc as required.
10
-
-
... More
Supplying and fixing suitable GI box with modular plate and cover in front on surface of in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch. Connection, painting etc. as required (For light plugs to be used in non residential buildings)
5
-
-
... More
power plug point with modular type accessories:- Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular type switch, connection, painting etc as required.
20
-
-
... More
Ceiling Rose:- Supplying and fixing 2 pin ceiling rose on the existing junction box/ wooden block including connection etc as required.
114
-
-
... More
Installation of exhaust fan up to 450mm sweep in the exisiting opnening, including making the hole t suit the size of the above fan, making good the damge, connection, testing , commissioning etc. as required
2
-
-
... More
Supplying and fixing following way, three pole and netural, sheet MCB ditribution board, 415 volts, on surface/recess, complete with tinned copper busbar, netural busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
4
-
-
... More
Supplying and fixing 6 amps to 32 amps rating, 240 volts, "B" series, miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commossioning etc. as required.
40
-
-
... More
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required
4
-
-
... More
G.I. Earth electrode with salt/charcoal - Earthing with G.I. earth pipe 4.5 mtr. Long, 40mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required
6
-
-
... More
Supplying and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth, including soldering etc. as required
75
-
-
... More
S.I.T.C of floowing rating LED Flood lighting Luminarie with pressure die cas housing and toughend glass cover, IP 66 protection, LUMINOUS EFFICARY ≥ 110 LM/W, with lens in existing pole / pipe for supply voltage 100-270V AC, 50Hz. Luminari shall be confirm to IS 10322 part-5 / section -5 shall be complete with all neccssary as required
10
-
-
... More
Supply Installation, testing and commissioning of follwing size ceiling fan 3 Blades confirming to IS:374:2019 including wiring the down rods of standard length (upto 30cm) with 1.5 sq.mm. FR PVC insulated, copper wire sutable for 230V 50HZ, single phase supply etc. complete as required.
2
-
-
... More
S.I.T.C of floowing rating surface mounted LED tube light fitting suitable for 230V 50HZ, single phase supply etc. complete as required
30
-
-
... More
Supply Installation, testing and commissioning of Industrial type 80 W LED COB High Bay Light Fittings as per direction of E/I.
80
-
-
... More
Providing and fixing following capacity busbar chamber with 4 strip of length 300mm made of copper suitable for following capacity complete with all accessories including connection, earting the body etc. as
-
-
-
... More
100amps
4
-
-
... More
Supply 12" dia exhaust fan etc.
2
-
-
... More
Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.
-
-
-
... More
450 mm
300
-
-
... More
600 mm
150
-
-
... More
Supplying and installing following size of perforated painted with powder coating M.S. cable trays bends with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.
-
-
-
... More
450 mm
30
-
-
... More
600 mm
18
-
-
... More
Supplying and installing following size of perforated painted with powder coating M.S. cable trays Tee with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.
-
-
-
... More
450 mm
12
-
-
... More
600 mm
8
-
-
... More
Laying of one number PILCA/ PVC insulated and PVC sheathed/ XLPE power cable of grade exceeding 1.1 K.V but not exceeding 11 KV of size not exceeding 120 sq mm in existing RCC/HUME/STONEW/METAL pipe as required.
1590
-
-
... More
Laying of one number PILCA/ PVC insulated and PVC sheathed/ XLPE power cable of grade exceeding 1.1 K.V but not exceeding 11 KV of size not exceeding 400 sq mm in existing RCC/HUME/STONEW/METAL pipe as required.
775
-
-
... More
Electrician Grade - I
10
-
-
... More
Electrician Grade - II
30
-
-
... More
Providing and fixing of XLPE, Aluminium Armoured PVC Cable confirming to IS: 1554 (Part-1) 1988 0f grade 1.1KV. Make:- Havells / Finolex / Polycab
-
-
-
... More
Supplying XLPE insulated PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor 1.1 KV of Size - 3.5 core, 50 sq.mm
225
-
-
... More
Supplying XLPE insulated PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor 1.1 KV of Size - 3.5 core, 95 sq.mm
175
-
-
... More
Supplying XLPE insulated PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor 1.1 KV of Size - 3.5 core, 150 sq.mm
150
-
-
... More
Supplying XLPE insulated PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor 1.1 KV of Size - 3.5 core, 185 sq.mm
135
-
-
... More
Part F Renovation of Chemical house & its allied works.
-
-
-
... More
Renovation of Chemical House
-
-
-
... More
Dismantling old plaster and pointing in cement or lime and raking out joints to 15 mm. depth, watering and disposal of unserviceable materials with all leads all complete as per direction
772.39
-
-
... More
Dismantling old plaster and pointing in cement or lime and raking out joints to 15 mm. depth, watering and disposal of unserviceable materials with all leads all complete as per direction of
246.22
-
-
... More
Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5with 5% cico or any other approved water proofing compoundincluding taxes and royalty all complete as per building specification and direction
1018.61
-
-
... More
Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
1231.11
-
-
... More
Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing, cleaning and preparing the walls, scafolding, washing of floor and taxes all complete as per building specification and direction of E/l.
3861.95
-
-
... More
Supplying, fitting and fixing callapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2 mm at 100mm. centres and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40x40x6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangements, stoppers, handles, including applying a priming coat of red lead paint, carriage , hoisting and taxes all complete as per building specification and direction of E/l.
11.06
-
-
... More
Supplying, fitting and fixing 20 guage G.C.I, sheet gate fitted on M.S. Angle frame of size 60x60x6mm. including cost of fabrication , providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/l.
15.94
-
-
... More
Supplying, fitting and fixing fully glazed steel door, windows or ventilations of standard rolled 'Z' and mullion steel sections and size as per IS-1038 joints met and welded with 100x16x3mm M.S. lugs fixed in cement concrete (1:2:4) blocks 15x10x10 cm size including cost of oxidised iron fittings, with hinges, handle per steps, catch springs, 3mm thick plain glass panes with Aluminimum beads and inner frame fixed with lugs with 20mm long 6.3mm G.I. counter sunk machine screw and nuts and applying a coat of red lead paint carriage to work site hoisting and placing in position in all storys and taxes all complete as per building specification and direction of E/l.
58.74
-
-
... More
Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth , carriage of grill to work site, hoisting as per building specification and direction of E/l. (where materials is not supplied by the deptt.)
669.15
-
-
... More
Providing 50x150mm teak wood Handrail with good quality of teak wood of av. 2. 5M. length with smooth finishing and rounded edges properly fitted to the railing including cost of spirit polishing of approved shade and make all complete as per drawing specification and direction of E/l.
6.71
-
-
... More
Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing rust , dirt, , scales , smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/l. ( Mode of measurement Area shall be multiplied by the co-efficient as indicated in building specification)
233.45
-
-
... More
Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l.
233.45
-
-
... More
Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l.
1270.58
-
-
... More
Providing and laying 15 mm - 23 mm thick kotah stone slab flooring of approved size, texture and colour over 19mm thick base of lime morter (1:1:1) (lime putty : surkhi: coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I.
418.54
-
-
... More
Providing and laying vitrified Paring /Industrial tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 4457:2007, of approved make , in all colours and shades , laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) , jointing with grey cement slurry @3.3kg/sqm including grounting the joints with white cement and matching pigments etc, complete Size of Tile 300x300x10mm sizes.
780.61
-
-
... More
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).
71.42
-
-
... More
Providing 250 mm thick brick jali work in C.M. (1:8) in superstructure with designation 75 A bricks and approved quality of clean coarse sand of F.M. 2 to 2.5] finished with deep ruled pointing in C.M. (1:3) with sand of F.M. 1.5 on entire surface including the cost of finishing, the holes, screening carriage of materials, scafolding, raking out joints to 15 mm depth, curing, taxes and royalty all complete as per approved design, building specification and direction of E/l.
20.82
-
-
... More
Dismantling R.C.C.work including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l.
42.66
-
-
... More
Waterproofing for old and new roof slab: - Providing and laying waterproofing treatment of roof slab by applying two Component, factory designed, ready to use, acrylic modified flexible material applied with a brush, roller or spray waterproofing coating as per manufacture specification with following steps:- (a) Surface preparation: - providing and cleaning of the concrete surface to remove dust, oil, and grease including removal of existing loose paint/coating, and laitance by cleaning with compressed air and water jet including all materials, labour, tools complete. Ponding test to be done after plugging all outlets and to be checked from soffit to identify seepage, and leakage. On identification of seepage, cement grouting to be done with non-shrink expanding admixture of sika India Pvt. Ltd. / MYK Schomberg / Dr. Fixit/ Fosroc or equivalent. Providing and repairing all corners and joints such as those between the parapet wall and roof slab etc shall be chamfered with 150mm X 150mm fillet with mortar ( cement: sand- 1:4) admixed with an acrylic polymer of sika/ Fosroc/ MYK Schomberg / Dr. Fixit/ Fosroc or equivalent. Before chamfering, a prime coat shall be given with the slurry of acrylic polymer. Repairing surface irregularities, damaged concrete base slab, dead crack if any, with acrylic polymer modification repair mortar including a coat of bonding agent of the same with cement slurry including all material, labour, tools complete.
(b) 1st coat:- Apply 1st coat of two-component acrylic modified, ready to use, flexible cementitious material on the surface dry roof and inside wall of parapet wall up to 600 mm by brush or roller. after 1st coat of application, 45gsm of fiberglass cloth to lay when the first layer is still green. 1st coat should be applied @ 1.50 kg/Sqmt/coat. For measurement will be measured (c) 2nd coat:- To apply the 2nd coat of two-component acrylic modified ready to use, flexible cementitious material right angle to the 1st coat over the glass surface. 2nd coat should be applied @ 0.7 kg /sqm/coat. For measurement, Cheniere treated surface will be measured. After three days of drying the 2nd coat. the rainwater outlet is to be plugged and a ponding test is to be done for 48 hours to identify seepage, leakage from the soffit, and if found necessary rectification is to be done as per the satisfaction of E/C. the waterproof coating is to be protected from damage before screed over it. Waterproofing bond:- Sika top seal 109i / Fosroc brush bond RFX/Dr. Fixit pidiffin 2k / MYK Aquafin TG. Product Performance- chemical base part A: acrylic copolymer, Part B: specially graded cementitious powder density 1.6kg/l (mixed density) at +27 degree c tensile strength ~ 2N/mm2 after 28days (with fiber cloth )( According to ASTM D 2370) pull out bond strength ~ 2N/mm2 (concrete failure) (According to ISO 4624) Slant- Shear Bond strength ~4N/mm2 (According to FIP 5.15) elongation at Break ~35% without Fiber Cloth and 20% with Fiber Cloth (According to ASTM D 2370)
(d) Protection of the treated surface with PCC:- the treated surface should be covered with 25mm/50mm PCC of M-20 grade (1:1.5:3) with proper slope (1:120) toward the rain outlet in Alterna panel of 2mtx2mt keeping 6mm gape between the plane joint integral waterproofing admixture conforming to IS 2645 @ of 100ml per bag of cement to be added in the screed concrete ( paid separately for this item) all corner shall be chamfered with 150mm x 150mm fillet. The rainwater outlet shall be just leveled with the screed concrete to ensure smooth discharge of water- the peripheral gapes between PVC pipe outlet and concrete surface should be packed properly with rich concrete and the peripheral mouth to be sealed with moisture insensitive epoxy putty of sika/ Fosroc/ MYK Schomberg / Dr. Fixit/ Fosroc. For measurement, the entire treated surface will be measured
(e) Groove of PCC surface should be filled with polysulphide sealant. (paid separately) . brand- sika/ Fosroc/ MYK Schomberg / Dr. Fixit/ Fosroc. Warranty for five years.
643.93
-
-
... More
Covering the treated surface with PCC:- 50mm thick Cement Concrete (1:1.5:3) maintaining the slop in 2mt x 2mt panels with approved quality of stone chips of 20 mm to 6 mm size graded and cleaned sand of F.M 2.5 to 3 including screening, shutting and mixing cement in mixture with an admixture of integral waterproofing and placing in position, striking curing, taxes, and royalty all complete as per building specification and direction of E/I. the panel that has been left should be cast the next day. there should be a 6mm gap between panels. Brand- sika_Plastocote plus, MYK Proof WP 10, Fosroc- conplast x 4211C,Dr. Fixit Pidiproof LW+ or Equivalent.
643.93
-
-
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
80
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
25
-
-
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement
: 4 coarse sand) and making good the wall etc. complete.
40
-
-
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
10
-
-
... More
Supplying, fitting and fixing glass panes including supplying putty, beads and nails after taking out old and broken glass panes and disposal of debris all complete as per building specification and direction of E/l.
2.97
-
-
... More
Carriage of materials
-
-
-
... More
Cement 10 km
28.64
-
-
... More
Sand 20 km
39.13
-
-
... More
Stone Chips 20Km
27.69
-
-
... More
Electrification Work
-
-
-
... More
Electrification Work in CHEMICAL HOUSE
-
-
-
... More
Wiring for light point /fan point/ exhaust fan point/ cell bell point, with 1.5 sq. mm FR PVC insulated copper conductor singel core in surface/recessed PVC conduit, with modular type switch, modular plate sutable GI box etc as required
50
-
-
... More
Power Plug wiring in PVC Conduit (2X4 Sq.mm) :- Wiring for light/power plug with 2x4 Sq.mm FR PVC insulated copper conductor songle core cable in surface/recessed PVC conduit along with 1 No. 4 Sq.mm FR PVC insulated copper conductor single core cable for loop earthing etc. as required.
210
-
-
... More
Circuit/Sub-main wiring in PVC Conduit:- Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required.
-
-
-
... More
earth wire
110
-
-
... More
earth wire
60
-
-
... More
earth wire
45
-
-
... More
Supplying and fixing of the following size of PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.
200
-
-
... More
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
2
-
-
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch excluding modular plate et. As required.
10
-
-
... More
Supplying and fixing following size / modular, G.I box along with modular base & cover plate for modular switches in recess etc as required.
10
-
-
... More
Supplying and fixing suitable GI box with modular plate and cover in front on surface of in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch. Connection, painting etc. as required (For light plugs to be used in non residential buildings)
5
-
-
... More
Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular type switch, connection, painting etc as required.
10
-
-
... More
Supplying and fixing 2 pin ceiling rose on the existing junction box/ wooden block including connection etc as required.
50
-
-
... More
Installation of exhaust fan up to 450mm sweep in the exisiting opnening, including making the hole t suit the size of the above fan, making good the damge, connection, testing , commissioning etc. as required
4
-
-
... More
Supplying and fixing following way, three pole and netural, sheet MCB ditribution board, 415 volts, on surface/recess, complete with tinned copper busbar, netural busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
2
-
-
... More
Supplying and fixing 6 amps to 32 amps rating, 240 volts, "B" series, miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commossioning etc. as required.
15
-
-
... More
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required
2
-
-
... More
G.I. Earth electrode with salt/charcoal - Earthing with G.I. earth pipe 4.5 mtr. Long, 40mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required
2
-
-
... More
Supplying and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth, including soldering etc. as required
25
-
-
... More
S.I.T.C of floowing rating LED Flood lighting Luminarie with pressure die cas housing and toughend glass cover, IP 66 protection, LUMINOUS EFFICARY ≥ 110 LM/W, with lens in existing pole / pipe for supply voltage 100-270V AC, 50Hz. Luminari shall be confirm to IS 10322 part-5 / section -5 shall be complete with all neccssary as required
4
-
-
... More
Supply Installation, testing and commissioning of follwing size ceiling fan 3 Blades confirming to IS:374:2019 including wiring the down rods of standard length (upto 30cm) with 1.5 sq.mm. FR PVC insulated, copper wire sutable for 230V 50HZ, single phase supply etc. complete as required.
2
-
-
... More
S.I.T.C of floowing rating surface mounted LED tube light fitting suitable for 230V 50HZ, single phase supply etc. complete as required
30
-
-
... More
Supply Installation, testing and commissioning of Industrial type 80 W LED COB High Bay Light Fittings as per direction of E/I.
14
-
-
... More
Providing and fixing following capacity busbar chamber with 4 strip of length 300mm made of copper suitable for following capacity complete with all accessories including connection, earting the body etc. as
-
-
-
... More
100amps
4
-
-
... More
Supply 12" dia exhaust fan etc.
4
-
-
... More
Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.
-
-
-
... More
450 mm
50
-
-
... More
600 mm
30
-
-
... More
Supplying and installing following size of perforated painted with powder coating M.S. cable trays bends with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.
-
-
-
... More
450 mm
10
-
-
... More
600 mm
12
-
-
... More
Supplying and installing following size of perforated painted with powder coating M.S. cable trays Tee with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.
-
-
-
... More
450 mm
2
-
-
... More
600 mm
1
-
-
... More
Laying of one number PILCA/ PVC insulated and PVC sheathed/ XLPE power cable of grade exceeding 1.1 K.V but not exceeding 11 KV of size not exceeding 120 sq mm in existing RCC/HUME/STONEW/METAL pipe as required.
150
-
-
... More
Laying of one number PILCA/ PVC insulated and PVC sheathed/ XLPE power cable of grade exceeding 1.1 K.V but not exceeding 11 KV of size not exceeding 400 sq mm in existing RCC/HUME/STONEW/METAL pipe as required.
65
-
-
... More
Electrician Grade - I
5
-
-
... More
Electrician Grade - II
20
-
-
... More
Providing and fixing of XLPE, Aluminium Armoured PVC Cable confirming to IS: 1554 (Part-1) 1988 0f grade 1.1KV. Make:- Havells / Finolex / Polycab
-
-
-
... More
Supplying XLPE insulated PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor 1.1 KV of Size - 3.5 core, 50 sq.mm
70
-
-
... More
Supplying XLPE insulated PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor 1.1 KV of Size - 3.5 core, 95 sq.mm
50
-
-
... More
Part G Renovation of Existing Fountain, Clear Water Sump & Clorinator Shed
-
-
-
... More
Renovation of Existing Fountain
-
-
-
... More
Dismantling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15M, lead and disposal of unserviceable materials with all leads all complete as per direction
56.77
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto to plinth level.
81.73
-
-
... More
Providing 12mm. Thick Cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction
354.81
-
-
... More
Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey ement slurry flush pointed with white cement including rubbing, polishing and cost of curing, taxes and royalty all complete as per building specification and direction
354.81
-
-
... More
Supply of (1) G.I ring 100MT length, (2) Adjustable brass nossle 50 pc, (3) Light Controller 1 no., (4) ( M.C.B 2 PC), (5) Pannel Box 1 pc, (6) Wiring 1.5 mm and 2.5 mm as required (7) LED Light 48pc (8) Laying of CPVC pipeline and connection of ferruls etc all complete work as per direction
1
-
-
... More
Supply of (1) G.I ring 100MT length, (2) Adjustable brass nossle 50 pc, (3) Light Controller 1 no., (4) ( M.C.B 2 PC), (5) Pannel Box 1 pc, (6) Wiring 1.5 mm and 2.5 mm as required (7) LED Light 48pc (8) Laying of CPVC pipeline and connection of ferruls etc all complete work as per direction
240
-
-
... More
Providing designation 75A bricks work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10mm thick mortar joint cost of screening material raking out joint to 15mm curing takes and royalty all complete as per building specification and direction
23.23
-
-
... More
Providing and laying factory made chamfered edge Cement Concrete
paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.
210
-
-
... More
Cast in Situ Cement Concrete M20 kerb (Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408)
210
-
-
... More
Carriage of material
-
-
-
... More
Sand 20Km
52.75
-
-
... More
Stone chips 20Km
81.72
-
-
... More
Bricks 8 km
9432
-
-
... More
Renovation of Clear Water Sump 2 Nos
-
-
-
... More
Waterproofing for old and new roof slab: - Providing and laying waterproofing treatment of roof slab by applying two Component, factory designed, ready to use, acrylic modified flexible material applied with a brush, roller or spray waterproofing coating as per manufacture specification with following steps:- (a) Surface preparation: - providing and cleaning of the concrete surface to remove dust, oil, and grease including removal of existing loose paint/coating, and laitance by cleaning with compressed air and water jet including all materials, labour, tools complete. Ponding test to be done after plugging all outlets and to be checked from soffit to identify seepage, and leakage. On identification of seepage, cement grouting to be done with non-shrink expanding admixture of sika India Pvt. Ltd. / MYK Schomberg / Dr. Fixit/ Fosroc or equivalent. Providing and repairing all corners and joints such as those between the parapet wall and roof slab etc shall be chamfered with 150mm X 150mm fillet with mortar ( cement: sand- 1:4) admixed with an acrylic polymer of sika/ Fosroc/ MYK Schomberg / Dr. Fixit/ Fosroc or equivalent. Before chamfering, a prime coat shall be given with the slurry of acrylic polymer. Repairing surface irregularities, damaged concrete base slab, dead crack if any, with acrylic polymer modification repair mortar including a coat of bonding agent of the same with cement slurry including all material, labour, tools complete.
(b) 1st coat:- Apply 1st coat of two-component acrylic modified, ready to use, flexible cementitious material on the surface dry roof and inside wall of parapet wall up to 600 mm by brush or roller. after 1st coat of application, 45gsm of fiberglass cloth to lay when the first layer is still green. 1st coat should be applied @ 1.50 kg/Sqmt/coat. For measurement will be measured (c) 2nd coat:- To apply the 2nd coat of two-component acrylic modified ready to use, flexible cementitious material right angle to the 1st coat over the glass surface. 2nd coat should be applied @ 0.7 kg /sqm/coat. For measurement, Cheniere treated surface will be measured. After three days of drying the 2nd coat. the rainwater outlet is to be plugged and a ponding test is to be done for 48 hours to identify seepage, leakage from the soffit, and if found necessary rectification is to be done as per the satisfaction of E/C. the waterproof coating is to be protected from damage before screed over it. Waterproofing bond:- Sika top seal 109i / Fosroc brush bond RFX/Dr. Fixit pidiffin 2k / MYK Aquafin TG. Product Performance- chemical base part A: acrylic copolymer, Part B: specially graded cementitious powder density 1.6kg/l (mixed density) at +27 degree c tensile strength ~ 2N/mm2 after 28days (with fiber cloth )( According to ASTM D 2370) pull out bond strength ~ 2N/mm2 (concrete failure) (According to ISO 4624) Slant- Shear Bond strength ~4N/mm2 (According to FIP 5.15) elongation at Break ~35% without Fiber Cloth and 20% with Fiber Cloth (According to ASTM D 2370)
(d) Protection of the treated surface with PCC:- the treated surface should be covered with 25mm/50mm PCC of M-20 grade (1:1.5:3) with proper slope (1:120) toward the rain outlet in Alterna panel of 2mtx2mt keeping 6mm gape between the plane joint integral waterproofing admixture conforming to IS 2645 @ of 100ml per bag of cement to be added in the screed concrete ( paid separately for this item) all corner shall be chamfered with 150mm x 150mm fillet. The rainwater outlet shall be just leveled with the screed concrete to ensure smooth discharge of water- the peripheral gapes between PVC pipe outlet and concrete surface should be packed properly with rich concrete and the peripheral mouth to be sealed with moisture insensitive epoxy putty of sika/ Fosroc/ MYK Schomberg / Dr. Fixit/ Fosroc. For measurement, the entire treated surface will be measured
(e) Groove of PCC surface should be filled with polysulphide sealant. (paid separately) . brand- sika/ Fosroc/ MYK Schomberg / Dr. Fixit/ Fosroc. Warranty for five years.
3652.94
-
-
... More
Covering the treated surface with PCC:- 25mm thick Cement Concrete (1:1.5:3) maintaining the slop in 2mt x 2mt panels with approved quality of stone chips of 20 mm to 6 mm size graded and cleaned sand of F.M 2.5 to 3 including screening, shutting and mixing cement in mixture with an admixture of integral waterproofing and placing in position, striking curing, taxes, and royalty all complete as per building specification and direction of E/I. the panel that has been left should be cast the next day. there should be a 6mm gap between panels. Brand- sika_Plastocote plus, MYK Proof WP 10, Fosroc- conplast x 4211C,Dr. Fixit Pidiproof LW+ or Equivalent.
3652.94
-
-
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
126.52
-
-
... More
Supplying and fixing C.I. cover without frame for manholes :
6
-
-
... More
Supplying the vent pipe on top of sump 32 nos
32
-
-
... More
Renovation of Clorinator Shed 3 Nos
-
-
-
... More
Providing two coats of snowcem of approved shade and make over old surface including washing cleaning, and preparing the walls, scaffolding, curing and taxes all complete as per building specification and direction of E/l.
66.92
-
-
... More
Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l.
27.88
-
-
... More
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).
27.88
-
-
... More
Taking down wooden beams, rafters, building frames etc. Of any type of roofing including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.
27.88
-
-
... More
Taking down C.A. Of G.C.I. Sheet in roofs with ridges including stacking the serviceable materials within 15M. Lead and disposal of unserviceable materials with all leads as per direction of E/I.
27.88
-
-
... More
Steel work welded in built up sections/ framed work, including cutting,
hoisting, fixing in position and applying a priming coat of approved steel
primer using structural steel etc. as required.
790.25
-
-
... More
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
27.88
-
-
... More
Supplying, fitting, and fixing M.S. grill gate with M.S. grills made of 20x6mm M.S. flats or 16mm square bars fitted on 25x25x6mm M.S Angle frame including the cost of fabrication, providing necessary locking arrangement with Haskell and downy duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steelwork, taxes all complete as per drawing specification and direction of E/l. (where steel is not supplied by the depth.)
585.5
-
-
... More
Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing rust , dirt, , scales , smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/l. ( Mode of measurement Area shall be multiplied by the co-efficient as indicated in building specification)
29.27
-
-
... More
Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l.
29.27
-
-
... More
Part H Renovation of CL Tank and Construction of Airiator with Fluxmixer 6 nos.
-
-
-
... More
Renovation of Clariflocculator (CL Tank)
-
-
-
... More
Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/l.
3648.94
-
-
... More
Providing two coats of snowcem of approved shade and make over old surface including washing cleaning, and preparing the walls, scaffolding, curing and taxes all complete as per building specification and direction of E/l.
3648.94
-
-
... More
Providing sohray painting in boundary wall all complete job including material as per direction of E/I
2311.23
-
-
... More
Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l.
3113.53
-
-
... More
Dismantling lime terracing upto av. 115mm depth with chisel and hammer including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.
693.37
-
-
... More
Providing and laying 15 mm - 23 mm thick kotah stone slab flooring of approved size, texture and colour over 19mm thick base of lime morter (1:1:1) (lime putty : surkhi: coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I.
693.37
-
-
... More
Providing & supplying ISI mark CI D/F sluice valve of 350 mm dia without bypass arrangement - PN 1
6
-
-
... More
14" X 750 MM Adaptor
2
-
-
... More
Providing of Opening & Closing Scour Valve 14" Dia.
6
-
-
... More
Construction of Aireator with Fluxmixer 6 Nos. near existing Clariflocculator of Old WTP
-
-
-
... More
Dismantaling of RCC and PCC work…
16.2
-
-
... More
Earth work in excavation in foundation….
169.68
-
-
... More
Providing PCC M-150 with nominal mix (1:2:4)..
8.64
-
-
... More
Providing RCC M-250 with (1:1.5:3) in pillor and beam..
34.32
-
-
... More
Providing RCC M-250 with (1:1.5:3) in top of aireator..
119.34
-
-
... More
Providing tor ateel reinforcement……..
15.36
-
-
... More
Providing Plaster in CM (1:4)……..
2204.94
-
-
... More
Providing ISI marks double charge vitrified Tiels……
848.94
-
-
... More
Earth work in back filling………
135.73
-
-
... More
750 mm dia 10mm thick M.S. pipe with fittings…
24
-
-
... More
Supplying, Fitting and Fixing of Fluxmixer with motor, gear box, shoft, rotter and its all alied works, all complete job as per specification and direction of E/I.
6
-
-
... More
Supplying wire, board, sweetch, making foundation of motor and gear box, Site cleaning, dismantaling of plaster and all required unseen work its, all complete job as per specification and direction of E/I.
6
-
-
... More
Providing Shuttering and Centering cost ……..
1517.1
-
-
... More
Providing appr. shade and make new surface painting…..
1517.1
-
-
... More
Carriage of Materials.
-
-
-
... More
a) Cement (lead 10.00 km)-
10.65
-
-
... More
b) Sand (lead 20.00 km)-
37.18
-
-
... More
c) Stone chips (lead 20.00 Km)-
139.92
-
-
... More
d) Steel (lead 10.00 km)-
15.37
-
-
... More
Part I Horticulture Work with Provisions of Solar Light
-
-
-
... More
SHURB & JUNGLE CLEARANCE
-
-
-
... More
Jungle clearance including weedingout shrubs and small trees upto 150mm. dia and their removal as per specification and direction of E/I.
7.67
-
-
... More
CONSTRUCTION OF GREEN HEDGE ALONG PATH
-
-
-
... More
Supply and staking of good earth at site including rayolty and carraigeupto 1km
148.68
-
-
... More
Supply and staking of SLUGE at site including rayolty and carraigeupto 1km
47.58
-
-
... More
Providing Cowdung manure or compost manure as per specificationand direction of officer in-charge. Lead up 8km
297.37
-
-
... More
Rough dressing the treanches ground including breaking clod
975.84
-
-
... More
Fine dressing of the ground
975.84
-
-
... More
Spreading of sluge, dump manure and good earth in required thickness as per direction of office-in charge. Earth+Slug +Manure (1+2+3)
493.63
-
-
... More
Mixing of earth and sluge or manure in required proportion as specified
493.63
-
-
... More
HEDGE PLANT
-
-
-
... More
Planting of Trees, Shrubs, and Hedge at site i/c watering and removal of unserviceable materials as per direction of officer in charge (excluding cost of plants and water).
Hedge Plant / Ground cover
-
-
-
... More
3 Plants per Meter
7000
-
-
... More
NEEM KHALI
400
-
-
... More
Vermicompost
600
-
-
... More
Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in 499 liters water and applying solution @ 1.00 liter solution per square lawn or bed area. (two application) i/c cost of chemical and as per direction of officer-in-charge.
975.84
-
-
... More
Earth work excavation in foundation trenches in ordinary soil (vide classification of soil item -A) and disposal of excavated earth as obtained to a distance upto 50M. Including alllifts, levelling, ramming the foundationtrencfhes, removing roots or trees, shurbs all complete as per approved design, building specification and direction of E/I.
82.57
-
-
... More
Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specificatio and direction of E/I. (Mode of measurement compacted volume)
41.28
-
-
... More
Providing designation 125mm th. reinforced designation 75A brick work in cement mortar (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, carriage of materials, scaffolding, raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all cmomplete as per building specification and direction of E/I.
243.96
-
-
... More
Providing 12mm. Thick Cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
539.96
-
-
... More
Colour washing two coat over a coat of white wash over new surface with approved quality of lime including cost of cleaning surface thoroghly and removing the scales of smoke and mosh marks with jhama rubbing, scaffolding, wahing, of floors and taxes all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
539.96
-
-
... More
Carriage of material
-
-
-
... More
Sand 20Km
22.31
-
-
... More
Brick 8 km
2790
-
-
... More
CONSTRUCTION OF GRASS LAWN
-
-
-
... More
Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).
141.6
-
-
... More
Supply and staking of good earth at site including royalty and carriage upto 1 km.
141.6
-
-
... More
Supply and staking of SLUGE
45.31
-
-
... More
Providing Cowdung manureor compost manure as per specificationand direction of E/I. Lead upto 8km.
45.31
-
-
... More
Rough dressing the treanches groundincluding breaking clod.
929.37
-
-
... More
Fine dressing of the ground
929.37
-
-
... More
Spreading of sluge, dump manure and good earth in required thickness as per direction of E/I. Earth+Slug +Manure
232.23
-
-
... More
Mixing of earth and sluge or manure in required proportion as specified.
232.23
-
-
... More
Grassing with selection No. 1/ Doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately).
-
-
-
... More
In rows 5 cm apart in both directions.
929.37
-
-
... More
Planting of Trees, Shrubs, and Hedge at site i/c watering and removal of unserviceable materials as per direction of officer in charge (excluding cost of plants and water).
Hedge Plant / Ground cover
835
-
-
... More
Cost of Compost
-
-
-
... More
NEEM KHALI
820
-
-
... More
Vermicompost
1025
-
-
... More
Anti termite treatment of lawn area through premise 30.50% I P. one litre premise diluted in 499 litres water and applying solution @ 1.00 litre solution per square lawn or bed area. (two application) i/c cost of chemical and as per direction of officer-in-charge.
929.37
-
-
... More
Earthwork excavation in foundation trenches in ordinary soil (vide classification of soil item -A) and disposal of excavated earth as obtained to a distance upto 50M. Including all lifts, levelling, ramming the foundation trenches, removing roots or trees, shurbs all complete as per approved design, building specification and direction of E/I.
9.45
-
-
... More
Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specificatio and direction of E/I. (Mode of measurement compacted volume)
4.72
-
-
... More
Providing designation 125mm th. reinforced designation 75A brick work in cement mortar (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, carriage of materials, scaffolding, raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I.
58.13
-
-
... More
Providing 12mm. Thick Cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
141.84
-
-
... More
Colour washing two coat over a coat of white wash over new surface with approved quality of lime including cost of cleaning surface thoroghly and removing the scales of smoke and mosh marks with jhama rubbing, scaffolding, wahing, of floors and taxes all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
141.84
-
-
... More
Carraige of material
-
-
-
... More
Sand 20Km
11.21
-
-
... More
Brick8 KM
3060
-
-
... More
CONSTRUCTION OF FLOWER BED
-
-
-
... More
Supply and staking of good earth at site including royalty and carriage upto 1km
106.2
-
-
... More
Supply and staking of Sludge at site including royalty and carriage upto 1km
37.17
-
-
... More
Providing Cowdung manure or compost manure as per specification and direction of officer in-charge. Lead up 8km
212.4
-
-
... More
Rough dressing the treanches groundincluding breaking clod
697.03
-
-
... More
Fine dressing of the ground
697.03
-
-
... More
spreading of sluge, dump manure and good earth in required thickness as per direction of office in-charge Earth+Slug +Manure (1+2+3)
355.78
-
-
... More
Mixing of earth and sluge or manure in required proportion as specified.
355.78
-
-
... More
Providing and stacking of winter seasonal seedling/ cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 No. plant as per direction of the officer in-charge.
-
-
-
... More
Alyssum
30
-
-
... More
Brachycome
25
-
-
... More
Cineraria
30
-
-
... More
Cosmos hybrid
40
-
-
... More
Dahlia double
30
-
-
... More
Daisy hybrid
30
-
-
... More
Marigold french hybrid dwarf
40
-
-
... More
Marigold Inca hybrid
30
-
-
... More
Pansy hybrid
40
-
-
... More
Poppy double
40
-
-
... More
Cost of Compost
-
-
-
... More
NEEM KHALI
150
-
-
... More
Vermicompost
250
-
-
... More
Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in 499 liters water and applying solution @ 1.00 liter solution per square lawn or bed area. (two application) i/c cost of chemical and as per direction of officer-in-charge.
697.03
-
-
... More
Earth work excavation in foundation trenches in ordinary soil (vide classification of soil item -A) and disposal of excavated earth as obtained to a distance upto 50M. Including alllifts, levelling, ramming the foundationtrencfhes, removing roots or trees, shurbs all complete as per approved design, building specification and direction of E/I.
4.13
-
-
... More
Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specificatio and direction of E/I. (Mode of measurement compacted volume)
2.06
-
-
... More
Providing designation 125mm th. reinforced designation 75A brick work in cement mortar (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, carriage of materials, scaffolding, raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all cmomplete as per building specification and direction of E/I.
24.4
-
-
... More
Providing 12mm. Thick Cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
29.6
-
-
... More
Colour washing two coat over a coat of white wash over new surface with approved quality of lime including cost of cleaning surface thoroghly and removing the scales of smoke and mosh marks with jhama rubbing, scaffolding, wahing, of floors and taxes all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
29.6
-
-
... More
Carraige of material
-
-
-
... More
Sand20 Km
10.9
-
-
... More
Brick10 KM
1270
-
-
... More
LED BASED SOLAR LIGHTING SYSTEM
-
-
-
... More
Supply & installation of Navin Urja™ Solar based LED Street Lighting System
Luminary : 12W LED Luminary Luminary Housing- Weather Proof Housing Structure- Hot Deep Galvanized Module Pole : Hot Deep Galvanized MS Pole (4.5 Mtr.)
Battery Box : Corrosion Resistant Painted Power Coated Metal Battery Box Other : Suitable Cable, Etc. Battery : 19.8Ah 14.8V Lithium-Ferro Battery of MNRE Approved
55
-
-
... More
Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size ) foundation including excavation and refilling etc. as required.
55
-
-
... More
Part J Beautification of Old W.T.P. Campus
-
-
-
... More
DEMOLITION OF OLD STRUCTURE
-
-
-
... More
Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.
14.11
-
-
... More
Dismantling R.C.C work including stacking serviceable materials in countable stacks within 15M lead and disposal of unserviceable materials with all leads all complete as per
direction of E/I.
4.95
-
-
... More
Dismantling lime terracing upto av. 115mm depth with chisel and hammer including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.
18.59
-
-
... More
CHANNEL FILLING
-
-
-
... More
Earth filling in foundation trenches and plinth in layers not exceeding 150 mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M. and lift of 1.5 M all complete as per building specification and direction of E/l (Mode of measurement compacted volume).
3398.47
-
-
... More
Extra lead for transportation above 50 M to 1Km all complete as per building specification and direction of E/l (Mode of measurement compacted volume).
3398.47
-
-
... More
Dismantling R.C.C work including stacking serviceable materials in countable stacks within 15M lead and disposal of unserviceable materials with all leads all complete as per
direction of E/I.
3.54
-
-
... More
CONSTRUCTION OF GAZEBO
-
-
-
... More
Earth work excavation in foundation trenches in ordinary soil (vide classification of soil item -A) and disposal of excavated earth as obtained to a distance upto 50M. Including alllifts, levelling, ramming the foundationtrencfhes, removing roots or trees, shurbs all complete as per approved design, building specification and direction of E/I.
10.6
-
-
... More
Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specificatio and direction of E/I. (Mode of measurement compacted volume)
8.64
-
-
... More
Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.
10.18
-
-
... More
Providing designation 75B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm th. Mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all cmomplete as per building specification and direction of E/I.
5.86
-
-
... More
Providing and laying and position cement concrete of specified grade excluding the cost of centering and shuttering- All work up to plinth level:
1.52
-
-
... More
Providing and laying in position specified grade of reinforced cement concrete , excluding the the cost of of centering , shurttering ,finishing and reinforcement- All work up to plinth level.
3.94
-
-
... More
Providing R.C.C.M-200 with nominal mix of (1:1 1/2:3) in beam of all types with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M.2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing inposition, vibrating, striking, curing (but excluding the cost of reniforcement, taxes and royalty all cmomplete as per building specification and direction of E/I.
17.54
-
-
... More
Reinforced cement concrete work in walls (any thickness), including attached plasters, buttresses, plinth and string course, fillets, columns, pillars, piers, abutments,posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement:
3.36
-
-
... More
Providing plain Tor steel reinforcement 8mm. dia rods as per approved design and drawing excluding carriage of M.S.bars to work site, cutting, bending, and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction
1
-
-
... More
Providing Tor steel reinforcement 10mm., 12mm. & 16mm. dia bars as per approved design and drawing excluding carriage of M.S.bars to work site, cutting, bending, and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction
-
-
-
... More
(a) 10mm
0.4
-
-
... More
(b) 12mm
1.2
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity..counters, window sills, facias and similar mortar moulding and polishing to edges to give high gloss finish etc. complete mixed with matching pigment, epoxy touch ups, including rubbing, curing, 1:4 (1 cement : 4 coarse sand), joints treated with white cement, locationsapproved shade, colour and texture laid over 20 mm thick base cement of required size,
46.84
-
-
... More
Providing 12mm. Thick Cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
408.04
-
-
... More
Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete.
159.38
-
-
... More
Finishing walls with Acrylic Smooth exterior paint of required shade :
408.04
-
-
... More
labour - Unskilled
100
-
-
... More
Mistri - Gr-II
40
-
-
... More
Head mistry Gr- I
20
-
-
... More
Carrige of materials
-
-
-
... More
Sand 20Km
29.32
-
-
... More
Stone chips 20Km
42.22
-
-
... More
Brick 8 km
320
-
-
... More
CONSTRUCTION OF GRASS LAWN WITH BEAUTIFICATION OF FLAG HOSTING POINT
-
-
-
... More
Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).
78.66
-
-
... More
Supply and staking of good earth at site including royalty and carriage upto 1 km.
78.66
-
-
... More
Supply and staking of SLUGE at site including royalty and carraige upto 1km
25.17
-
-
... More
Providing Cowdung manureor compost manure as per specificationand direction of E/I. Lead upto 8km.
25.17
-
-
... More
Rough dressing the treanches groundincluding breaking clod.
516.14
-
-
... More
Fine dressing of the ground
516.14
-
-
... More
Spreading of sluge, dump manure and good earth in required thickness as per direction of E/I. Earth+Slug +Manure
129
-
-
... More
Mixing of earth and sluge or manure in required proportion as specified.
129
-
-
... More
Grassing with selection No. 1/ Doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately).
516.14
-
-
... More
Cost of Compost
-
-
-
... More
NEEM KHALI
820
-
-
... More
Vermicompost
1025
-
-
... More
Earthwork excavation in foundation trenches in ordinary soil (vide classification of soil item -A) and disposal of excavated earth as obtained to a distance upto 50M. Including all lifts, levelling, ramming the foundation trenches, removing roots or trees, shurbs all complete as per approved design, building specification and direction of E/I.
10.84
-
-
... More
Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specificatio and direction of E/I. (Mode of measurement compacted volume)
5.42
-
-
... More
Providing designation 125mm th. reinforced designation 75A brick work in cement mortar (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, carriage of materials, scaffolding, raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I.
64.25
-
-
... More
Providing 12mm. Thick Cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
77.16
-
-
... More
Colour washing two coat over a coat of white wash over new surface with approved quality of lime including cost of cleaning surface thoroghly and removing the scales of smoke and mosh marks with jhama rubbing, scaffolding, wahing, of floors and taxes all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
77.16
-
-
... More
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
75.35
-
-
... More
Carriage of materials
-
-
-
... More
Cement 10 km
1.21
-
-
... More
Bricks 8 km
3314
-
-
... More
Sand 20 km
9.29
-
-
... More
GST @ 18%
1
-
-
... More
Labour Cess @ 1%
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements