Drinking Water And Sanitation Department Tender

Supplying laying and fitting of 70mm2X 3.5 core aluminium armoured cable universal/polycab /mescab or reputed make.

Supplying and fitting of 100 Amp change over switch L&T/ Havells/ C&S or reputed make

Supplying, installation and commissioning of 30 KVA roller type servo stabilizer switch for input voltage 280 to 460 volts output voltage of 415+1% volt, 3 phase 50 Hz with copper wound transformer (oil cooled) as mention below. The stabilizer shall function satisfactorily even if incoming supply is unbalanced between phase within range of 10% The stabilizer should be constructed in cubical box, with bidirectional wheels for easy handling, necessary monitors and user controls o9n front panel such as indicator alarm volt meter and selector switch for measuring input and output voltage, auto /manual selector switch, raise /low push button etc suitable capacity termination strips and bus bar for incoming and outgoing cable should be provided all three phase shall be independently monitored and connected following protections and indication shall be incorporated (i)Over voltage/under voltage (ii)Single phasing (iii)Cut of contractor with electronic output sensing unit make servokon

Supplying and erecting of earthing station as per IE rule including the cost of earth pit. 8 SWG copper wire, G.I pipe all complete with sand, charcoal and salt etc to all electrical equipment in double way wire connection.

CLEAR WATER PUMPIMG PLANT Supplying installation & commissioning of HSC C/F pump single or multi-stage pump set of Kirloskar /Jyoti /M&P /WPIL make cable for discharging 43 m3/hr against total head of 78mtr. Coupled with suitable size energy efficient IE3 induction motor as per IS 12615:2011 with latest amendments induction motor three phase squirrel cage motor operated on 415volt 3phase, 50C/S, 1400-1500 rpm (Kirloskar, Jyoti, ABB, CGL, BHEL or reputed make) with suitable size of ISI marked heavy duty CIDF sluice valve, CIDF NR valve etc all complete.

Supplying installation and commissioning of motor control panel of free standing type floor mounted made of 2mm thick M.S. cubical panel should be duly painted with two coats of super enameled paint comprising of:- (A)Incoming feeder (i) 150A MCCB- 01 Nos. (ii)150 Amp copper bus bar arrangement 4 pole (iii)Phase indicating lamps. (B)Out going Feeder (i) 100AMCCB- 2NOS. (ii)Voltmeter -1NOS. (iii)Ammeter – 1NOS. (iv)Selector switch (v) Pilot lamps (vi)FASD starter- 1NOS.(25HP) Including motor control relays, over/under current relays etc all complete internal wining with suitable size of copper wire.

Supplying and laying of 25 mm2x 3 core PVC insulated and PVC sheathed unarmoured copper conductor for power wining from panel to motor for 01 sets.

Supplying laying and fitting of 95mm2X 3.5 core aluminium armoured cable universal/polycab /mescab or reputed make.

Supplying and fitting of 200 Amp change over switch L&T/ Havells/ C&S or reputed make

Supplying, installation and commissioning of 75 KVA roller type servo stabilizer switch for input voltage 280 to 460 volts output voltage of 415+1% volt, 3 phase 50 Hz with copper wound transformer (oil cooled) as mention below. The stabilizer shall function satisfactorily even if incoming supply is unbalanced between phase within range of 10% The stabilizer should be constructed in cubical box, with bidirectional wheels for easy handling, necessary monitors and user controls o9n front panel such as indicator alarm volt meter and selector switch for measuring input and output voltage, auto /manual selector switch, raise /low push button etc suitable capacity termination strips and bus bar for incoming and outgoing cable should be provided all three phase shall be independently monitored and connected following protections and indication shall be incorporated (i)Over voltage/under voltage (ii)Single phasing (iii)Cut of contractor with electronic output sensing unit make servokon

Supplying and erecting of earthing station as per IE rule including the cost of earth pit. 8 SWG copper wire, G.I pipe all complete with sand, charcoal and salt etc to all electrical equipment in double way wire connection.