Drinking Water And Sanitation Department Tender
Search from across the categories, cities, and authorities to find the latest Jharkhand tenders. Every Jharkhand tender is curated from credible sources of government websites (eProcurement Jharkhand portal) and newspapers, thus ensuring the credibility of the information presented to you. For more information on Jharkhand tender bidder registration, the login process and more read the FAQs section on this page.
Drinking Water And Sanitation Department - DWSD Tender
Civil And Construction
Eprocure
Opening Date14 Jun 2024
Closing Date20 Jun 2024
Tender Amount₹ 32,28,937
Costs
EMD
₹ 65,000Document Cost
₹ 5,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_DWSD_86484_1Bid Award Id
ViewTender No
Jamshedpur-03/2024-25 Gr.-03 Dt.-07.06.2024Tender Authority
Drinking Water And Sanitation Department ViewPurchaser Address
-Website
http://https://jalshakti-ddws.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
20 mm HDPE Pipe-
50
1250
25
Providing and supplying High Density Polyethylene (HDPE ) fittings of 20 mm to 225 mm OD and pressure
6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties.
5035
503
0.1
Lowering, Laying and Jointing H. D. P. E./M. D.P. E. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS Code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS- 7634 Part II.
For Rising
40 mm HDPE Pipe-
50
1150
23
20 mm HDPE Pipe-
50
600
12
Providing 15 mm dia. G.I. pipe Tata or equivalent make as per IS 1239 (Part 1/2004) ISI Mark /medium quality in Stand Post.
5
600
120.12
Supplying all materials , labour and tools for fixing 15 mm dia G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge.
5
67
13.59
Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I.
(1) Elbow (a) 15 mm dia.
10
807
80.78
(3) Nipple -
(a) 15 mm dia.
10
781
78.19
(4) Plain Socket -
(a) 15 mm dia.
10
769
76.99
Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main Including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dm ferrule weight not less than 425 gram.
5
3116
623.29
Providing and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra socket all complete as per specification and direction of E/I.
15 dia and weight not less than 400 Gm
5
997
199.58
Supplying materials , labours and equipment's for construction of 0.90M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform with stand post in house including
12 mm thick cement plaster in C.M. (1:4) with neat cement punning over exposed surface all complete job, as per approved design, specification and direction of E/I.
(As per Annexure II Attached)
1.20 M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform -
5
7000
1400
Providing brick masonry chamber of inner size 600 x 600 x 450 mm deep for bore well protection having 125 mm thick wall and 75 mm R.C.C cover including cement plaster of exposed surface, etc all complete job
1
2719
2719
Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge.
31.88
2994
93.93
Providing fitting & fixing 32 mm to 50 mm service HDPE saddle all complete job, as per approved design, specification and direction of E/I. (As per old model estimate)
5
270
54
Designing, Supplying, Installation, Testing & Commissioning with all tools & Parts of following Solar Photovoltaic (SPV) Solar Submersible D.C. Water Motor Pump Suitable for minimum 125mm x 115mm bore well as per MNRE Guideline with following specifications & accessories.
SPV arrays contains specified No of same capacity type & specification modules connected to series or parallel to obtained the required voltage & current the power output of individual PV modules should be minimum 200 watt peak.
i) The SPV modules should be as per IEC-61215 and
IEC 61730 part 1.0)
1
119000
119000
O & M Cost for 1st year (Excluding Repair Charges)
1
9000
9000
O & M cost for 2nd Year = O & M for 1st Yr + 6% of O&M for 1st Year + Annual repairing Charges
1
9617
9617.95
O & M cost for 3rd Year =1.06 x 2st year
1
10195
10195.03
O & M cost for 4th Year =1.06 x 3rd year
1
10806
10806.73
O & M cost for 5th Year =1.06 x 4th year
1
11455
11455.13
Provision of one no SIM card & its recharging cost for RMC
5
4000
800
Add 18% GST (9% CGST+ 9% SGST)
1
37282
37282.45
Add 1% Labour Cess
1
2444
2444.07
Panchayat-Barakanjiya, Village- Jadugora, Habitation-Lukaikocha at Block- Dumaria
-
-
-
Earth work in excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I.
37.5
5635
150.29
Distribution
Providing and supplying High Density Polyethylene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074
materials rates are Ex-factory excluding transportation, taxes and duties.
40mm HDPE Pipe-
50
3785
75.7
20 mm HDPE Pipe-
50
1250
25
Providing and supplying High Density Polyethylene (HDPE ) fittings of 20 mm to 225 mm OD and pressure
6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties.
5035
503
0.1
Lowering, Laying and Jointing H. D. P. E./M. D.P. E. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS Code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS- 7634 Part II.
For Rising
40 mm HDPE Pipe-
50
1150
23
20 mm HDPE Pipe-
50
600
12
Providing 15 mm dia. G.I. pipe Tata or equivalent make as per IS 1239 (Part 1/2004) ISI Mark /medium quality in Stand Post.
5
600
120.12
Supplying all materials , labour and tools for fixing 15 mm dia G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge.
5
67
13.59
Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I.
(1) Elbow (a) 15 mm dia.
10
807
80.78
(3) Nipple -
(a) 15 mm dia.
10
781
78.19
(4) Plain Socket -
(a) 15 mm dia.
10
769
76.99
Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main Including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dm ferrule weight not less than 425 gram.
5
3116
623.29
Providing and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra socket all complete as per specification and direction of E/I.
15 dia and weight not less than 400 Gm
5
997
199.58
Supplying materials , labours and equipment's for construction of 0.90M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform with stand post in house including
12 mm thick cement plaster in C.M. (1:4) with neat cement punning over exposed surface all complete job, as per approved design, specification and direction of E/I.
(As per Annexure II Attached)
1.20 M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform -
5
7000
1400
Providing brick masonry chamber of inner size 600 x 600 x 450 mm deep for bore well protection having 125 mm thick wall and 75 mm R.C.C cover including cement plaster of exposed surface, etc all complete job
1
2719
2719
Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge.
31.88
2994
93.93
Providing fitting & fixing 32 mm to 50 mm service HDPE saddle all complete job, as per approved design, specification and direction of E/I. (As per old model estimate)
5
270
54
Providing fitting & fixing 32 mm to 50 mm service HDPE saddle all complete job, as per approved design, specification and direction of E/I. (As per old model estimate)
5
270
54
Designing, Supplying, Installation, Testing & Commissioning with all tools & Parts of following Solar Photovoltaic (SPV) Solar Submersible D.C. Water Motor Pump Suitable for minimum 125mm x 115mm bore well as per MNRE Guideline with following specifications & accessories.
SPV arrays contains specified No of same capacity type & specification modules connected to series or parallel to obtained the required voltage & current the power output of individual PV modules should be minimum 200 watt peak.
i) The SPV modules should be as per IEC-61215 and
IEC 61730 part 1.0)
1
119000
119000
O & M Cost for 1st year (Excluding Repair Charges)
1
9000
9000
O & M cost for 2nd Year = O & M for 1st Yr + 6% of O&M for 1st Year + Annual repairing Charges
1
9617
9617.95
O & M cost for 3rd Year =1.06 x 2st year
1
10195
10195.03
O & M cost for 4th Year =1.06 x 3rd year
1
10806
10806.73
O & M cost for 5th Year =1.06 x 4th year
1
11455
11455.13
Provision of one no SIM card & its recharging cost for RMC
5
4000
800
Add 18% GST (9% CGST+ 9% SGST)
1
37282
37282.45
Add 1% Labour Cess
1
2444
2444.07
Panchayat-Palasbani, Village- Palasbani, Habitation-Burudih at Block- Dumaria
-
-
-
Earth work in excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I.
37.5
5635
150.29
Distribution
Providing and supplying High Density Polyethylene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074
materials rates are Ex-factory excluding transportation, taxes and duties.
40mm HDPE Pipe-
50
3785
75.7
20 mm HDPE Pipe-
50
1250
25
Providing and supplying High Density Polyethylene (HDPE ) fittings of 20 mm to 225 mm OD and pressure
6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties.
5035
503
0.1
Lowering, Laying and Jointing H. D. P. E./M. D.P. E. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS Code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS- 7634 Part II.
For Rising
40 mm HDPE Pipe-
50
1150
23
20 mm HDPE Pipe-
50
600
12
Providing 15 mm dia. G.I. pipe Tata or equivalent make as per IS 1239 (Part 1/2004) ISI Mark /medium quality in Stand Post.
5
600
120.12
Supplying all materials , labour and tools for fixing 15 mm dia G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge.
5
67
13.59
Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I.
(1) Elbow (a) 15 mm dia.
10
807
80.78
(3) Nipple -
(a) 15 mm dia.
10
781
78.19
(4) Plain Socket -
(a) 15 mm dia.
10
769
76.99
Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main Including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dm ferrule weight not less than 425 gram.
5
3116
623.29
Providing and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra socket all complete as per specification and direction of E/I.
15 dia and weight not less than 400 Gm
5
997
199.58
Supplying materials , labours and equipment's for construction of 0.90M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform with stand post in house including
12 mm thick cement plaster in C.M. (1:4) with neat cement punning over exposed surface all complete job, as per approved design, specification and direction of E/I.
(As per Annexure II Attached)
1.20 M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform -
5
7000
1400
Providing brick masonry chamber of inner size 600 x 600 x 450 mm deep for bore well protection having 125 mm thick wall and 75 mm R.C.C cover including cement plaster of exposed surface, etc all complete job
1
2719
2719
Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge.
31.88
2994
93.93
Providing fitting & fixing 32 mm to 50 mm service HDPE saddle all complete job, as per approved design, specification and direction of E/I. (As per old model estimate)
5
270
54
Designing, Supplying, Installation, Testing & Commissioning with all tools & Parts of following Solar Photovoltaic (SPV) Solar Submersible D.C. Water Motor Pump Suitable for minimum 125mm x 115mm bore well as per MNRE Guideline with following specifications & accessories.
SPV arrays contains specified No of same capacity type & specification modules connected to series or parallel to obtained the required voltage & current the power output of individual PV modules should be minimum 200 watt peak.
i) The SPV modules should be as per IEC-61215 and
IEC 61730 part 1.0)
1
119000
119000
O & M Cost for 1st year (Excluding Repair Charges)
1
9000
9000
O & M cost for 2nd Year = O & M for 1st Yr + 6% of O&M for 1st Year + Annual repairing Charges
1
9617
9617.95
O & M cost for 3rd Year =1.06 x 2st year
1
10195
10195.03
O & M cost for 4th Year =1.06 x 3rd year
1
10806
10806.73
O & M cost for 5th Year =1.06 x 4th year
1
11455
11455.13
Provision of one no SIM card & its recharging cost for RMC
5
4000
800
Add 18% GST (9% CGST+ 9% SGST)
1
37282
37282.45
Add 1% Labour Cess
1
2444
2444.07
Panchayat-astaqwali, Village- bhagabera, Habitation-khas at Block- Dumaria
-
-
-
Earth work in excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I.
37.5
5635
150.29
Distribution
Providing and supplying High Density Polyethylene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074
materials rates are Ex-factory excluding transportation, taxes and duties.
40mm HDPE Pipe-
50
3785
75.7
20 mm HDPE Pipe-
50
1250
25
Providing and supplying High Density Polyethylene (HDPE ) fittings of 20 mm to 225 mm OD and pressure
6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties.
5035
503
0.1
Lowering, Laying and Jointing H. D. P. E./M. D.P. E. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS Code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS- 7634 Part II.
For Rising
40 mm HDPE Pipe-
50
1150
23
20 mm HDPE Pipe-
50
600
12
Providing 15 mm dia. G.I. pipe Tata or equivalent make as per IS 1239 (Part 1/2004) ISI Mark /medium quality in Stand Post.
5
600
120.12
Supplying all materials , labour and tools for fixing 15 mm dia G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge.
5
67
13.59
Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I.
(1) Elbow (a) 15 mm dia.
10
807
80.78
(3) Nipple -
(a) 15 mm dia.
10
781
78.19
(4) Plain Socket -
(a) 15 mm dia.
10
769
76.99
Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main Including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dm ferrule weight not less than 425 gram.
5
3116
623.29
Providing and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra socket all complete as per specification and direction of E/I.
15 dia and weight not less than 400 Gm
5
997
199.58
Supplying materials , labours and equipment's for construction of 0.90M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform with stand post in house including
12 mm thick cement plaster in C.M. (1:4) with neat cement punning over exposed surface all complete job, as per approved design, specification and direction of E/I.
(As per Annexure II Attached)
1.20 M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform -
5
7000
1400
Providing brick masonry chamber of inner size 600 x 600 x 450 mm deep for bore well protection having 125 mm thick wall and 75 mm R.C.C cover including cement plaster of exposed surface, etc all complete job
1
2719
2719
Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge.
31.88
2994
93.93
Providing fitting & fixing 32 mm to 50 mm service HDPE saddle all complete job, as per approved design, specification and direction of E/I. (As per old model estimate)
5
270
54
Designing, Supplying, Installation, Testing & Commissioning with all tools & Parts of following Solar Photovoltaic (SPV) Solar Submersible D.C. Water Motor Pump Suitable for minimum 125mm x 115mm bore well as per MNRE Guideline with following specifications & accessories.
SPV arrays contains specified No of same capacity type & specification modules connected to series or parallel to obtained the required voltage & current the power output of individual PV modules should be minimum 200 watt peak.
i) The SPV modules should be as per IEC-61215 and
IEC 61730 part 1.0)
1
119000
119000
O & M Cost for 1st year (Excluding Repair Charges)
1
9000
9000
O & M cost for 2nd Year = O & M for 1st Yr + 6% of O&M for 1st Year + Annual repairing Charges
1
9617
9617.95
O & M cost for 3rd Year =1.06 x 2st year
1
10195
10195.03
O & M cost for 4th Year =1.06 x 3rd year
1
10806
10806.73
O & M cost for 5th Year =1.06 x 4th year
1
11455
11455.13
Provision of one no SIM card & its recharging cost for RMC
5
4000
800
Add 18% GST (9% CGST+ 9% SGST)
1
37282
37282.45
Add 1% Labour Cess
1
2444
2444.07
Panchayat-astaqwali, Village- astaqwali, Habitation-quali at Block- Dumaria
-
-
-
Earth work in excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I.
37.5
5635
150.29
Distribution
Providing and supplying High Density Polyethylene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074
materials rates are Ex-factory excluding transportation, taxes and duties.
40mm HDPE Pipe-
50
3785
75.7
20 mm HDPE Pipe-
50
1250
25
Providing and supplying High Density Polyethylene (HDPE ) fittings of 20 mm to 225 mm OD and pressure
6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties.
5035
503
0.1
Lowering, Laying and Jointing H. D. P. E./M. D.P. E. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS Code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS- 7634 Part II.
For Rising
40 mm HDPE Pipe-
50
1150
23
20 mm HDPE Pipe-
50
600
12
Providing 15 mm dia. G.I. pipe Tata or equivalent make as per IS 1239 (Part 1/2004) ISI Mark /medium quality in Stand Post.
5
600
120.12
Supplying all materials , labour and tools for fixing 15 mm dia G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge.
5
67
13.59
Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I.
(1) Elbow (a) 15 mm dia.
10
807
80.78
(3) Nipple -
(a) 15 mm dia.
10
781
78.19
(4) Plain Socket -
(a) 15 mm dia.
10
769
76.99
Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main Including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dm ferrule weight not less than 425 gram.
5
3116
623.29
Providing and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra socket all complete as per specification and direction of E/I.
15 dia and weight not less than 400 Gm
5
997
199.58
Supplying materials , labours and equipment's for construction of 0.90M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform with stand post in house including
12 mm thick cement plaster in C.M. (1:4) with neat cement punning over exposed surface all complete job, as per approved design, specification and direction of E/I.
(As per Annexure II Attached)
1.20 M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform -
5
7000
1400
Providing brick masonry chamber of inner size 600 x 600 x 450 mm deep for bore well protection having 125 mm thick wall and 75 mm R.C.C cover including cement plaster of exposed surface, etc all complete job
1
2719
2719
Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge.
31.88
2994
93.93
Providing fitting & fixing 32 mm to 50 mm service HDPE saddle all complete job, as per approved design, specification and direction of E/I. (As per old model estimate)
5
270
54
Designing, Supplying, Installation, Testing & Commissioning with all tools & Parts of following Solar Photovoltaic (SPV) Solar Submersible D.C. Water Motor Pump Suitable for minimum 125mm x 115mm bore well as per MNRE Guideline with following specifications & accessories.
SPV arrays contains specified No of same capacity type & specification modules connected to series or parallel to obtained the required voltage & current the power output of individual PV modules should be minimum 200 watt peak.
i) The SPV modules should be as per IEC-61215 and
IEC 61730 part 1.0)
1
119000
119000
O & M Cost for 1st year (Excluding Repair Charges)
1
9000
9000
O & M cost for 2nd Year = O & M for 1st Yr + 6% of O&M for 1st Year + Annual repairing Charges
1
9617
9617.95
O & M cost for 3rd Year =1.06 x 2st year
1
10195
10195.03
O & M cost for 4th Year =1.06 x 3rd year
1
10806
10806.73
O & M cost for 5th Year =1.06 x 4th year
1
11455
11455.13
Provision of one no SIM card & its recharging cost for RMC
5
4000
800
Add 18% GST (9% CGST+ 9% SGST)
1
37282
37282.45
Add 1% Labour Cess
1
2444
2444.07
Panchayat-kendua, Village- Rangamatia, Habitation-Salgadih a at Block- Dumaria
-
-
-
Earth work in excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I.
37.5
5635
150.29
Distribution
Providing and supplying High Density Polyethylene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074
materials rates are Ex-factory excluding transportation, taxes and duties.
40mm HDPE Pipe-
50
3785
75.7
20 mm HDPE Pipe-
50
1250
25
Providing and supplying High Density Polyethylene (HDPE ) fittings of 20 mm to 225 mm OD and pressure
6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties.
5035
503
0.1
Lowering, Laying and Jointing H. D. P. E./M. D.P. E. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS Code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS- 7634 Part II.
For Rising
40 mm HDPE Pipe-
50
1150
23
20 mm HDPE Pipe-
50
600
12
Providing 15 mm dia. G.I. pipe Tata or equivalent make as per IS 1239 (Part 1/2004) ISI Mark /medium quality in Stand Post.
5
600
120.12
Supplying all materials , labour and tools for fixing 15 mm dia G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge.
5
67
13.59
Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I.
(1) Elbow (a) 15 mm dia.
10
807
80.78
(3) Nipple -
(a) 15 mm dia.
10
781
78.19
(4) Plain Socket -
(a) 15 mm dia.
10
769
76.99
Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main Including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dm ferrule weight not less than 425 gram.
5
3116
623.29
Providing and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra socket all complete as per specification and direction of E/I.
15 dia and weight not less than 400 Gm
5
997
199.58
Supplying materials , labours and equipment's for construction of 0.90M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform with stand post in house including
12 mm thick cement plaster in C.M. (1:4) with neat cement punning over exposed surface all complete job, as per approved design, specification and direction of E/I.
(As per Annexure II Attached)
1.20 M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform -
5
7000
1400
Providing brick masonry chamber of inner size 600 x 600 x 450 mm deep for bore well protection having 125 mm thick wall and 75 mm R.C.C cover including cement plaster of exposed surface, etc all complete job
1
2719
2719
Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge.
31.88
2994
93.93
Providing fitting & fixing 32 mm to 50 mm service HDPE saddle all complete job, as per approved design, specification and direction of E/I. (As per old model estimate)
5
270
54
Designing, Supplying, Installation, Testing & Commissioning with all tools & Parts of following Solar Photovoltaic (SPV) Solar Submersible D.C. Water Motor Pump Suitable for minimum 125mm x 115mm bore well as per MNRE Guideline with following specifications & accessories.
SPV arrays contains specified No of same capacity type & specification modules connected to series or parallel to obtained the required voltage & current the power output of individual PV modules should be minimum 200 watt peak.
i) The SPV modules should be as per IEC-61215 and
IEC 61730 part 1.0)
1
119000
119000
O & M Cost for 1st year (Excluding Repair Charges)
1
9000
9000
O & M cost for 2nd Year = O & M for 1st Yr + 6% of O&M for 1st Year + Annual repairing Charges
1
9617
9617.95
O & M cost for 3rd Year =1.06 x 2st year
1
10195
10195.03
O & M cost for 4th Year =1.06 x 3rd year
1
10806
10806.73
O & M cost for 5th Year =1.06 x 4th year
1
11455
11455.13
Provision of one no SIM card & its recharging cost for RMC
5
4000
800
Add 18% GST (9% CGST+ 9% SGST)
1
37282
37282.45
Add 1% Labour Cess
1
2444
2444.07
Panchayat-kendua, Village- badalkocha, Habitation-Garimasai at Block- Dumaria
-
-
-
Earth work in excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I.
37.5
5635
150.29
Distribution
Providing and supplying High Density Polyethylene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074
materials rates are Ex-factory excluding transportation, taxes and duties.
40mm HDPE Pipe-
50
3785
75.7
20 mm HDPE Pipe-
50
1250
25
Providing and supplying High Density Polyethylene (HDPE ) fittings of 20 mm to 225 mm OD and pressure
6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties.
5035
503
0.1
Lowering, Laying and Jointing H. D. P. E./M. D.P. E. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS Code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS- 7634 Part II.
For Rising
40 mm HDPE Pipe-
50
1150
23
20 mm HDPE Pipe-
50
600
12
Providing 15 mm dia. G.I. pipe Tata or equivalent make as per IS 1239 (Part 1/2004) ISI Mark /medium quality in Stand Post.
5
600
120.12
Supplying all materials , labour and tools for fixing 15 mm dia G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge.
5
67
13.59
Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I.
(1) Elbow (a) 15 mm dia.
10
807
80.78
(3) Nipple -
(a) 15 mm dia.
10
781
78.19
(4) Plain Socket -
(a) 15 mm dia.
10
769
76.99
Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main Including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dm ferrule weight not less than 425 gram.
5
3116
623.29
Providing and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra socket all complete as per specification and direction of E/I.
15 dia and weight not less than 400 Gm
5
997
199.58
Supplying materials , labours and equipment's for construction of 0.90M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform with stand post in house including
12 mm thick cement plaster in C.M. (1:4) with neat cement punning over exposed surface all complete job, as per approved design, specification and direction of E/I.
(As per Annexure II Attached)
1.20 M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform -
5
7000
1400
Providing brick masonry chamber of inner size 600 x 600 x 450 mm deep for bore well protection having 125 mm thick wall and 75 mm R.C.C cover including cement plaster of exposed surface, etc all complete job
1
2719
2719
Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge.
31.88
2994
93.93
Providing fitting & fixing 32 mm to 50 mm service HDPE saddle all complete job, as per approved design, specification and direction of E/I. (As per old model estimate)
5
270
54
Designing, Supplying, Installation, Testing & Commissioning with all tools & Parts of following Solar Photovoltaic (SPV) Solar Submersible D.C. Water Motor Pump Suitable for minimum 125mm x 115mm bore well as per MNRE Guideline with following specifications & accessories.
SPV arrays contains specified No of same capacity type & specification modules connected to series or parallel to obtained the required voltage & current the power output of individual PV modules should be minimum 200 watt peak.
i) The SPV modules should be as per IEC-61215 and
IEC 61730 part 1.0)
1
119000
119000
O & M Cost for 1st year (Excluding Repair Charges)
1
9000
9000
O & M cost for 2nd Year = O & M for 1st Yr + 6% of O&M for 1st Year + Annual repairing Charges
1
9617
9617.95
O & M cost for 3rd Year =1.06 x 2st year
1
10195
10195.03
O & M cost for 4th Year =1.06 x 3rd year
1
10806
10806.73
O & M cost for 5th Year =1.06 x 4th year
1
11455
11455.13
Provision of one no SIM card & its recharging cost for RMC
5
4000
800
Add 18% GST (9% CGST+ 9% SGST)
1
37282
37282.45
Add 1% Labour Cess
1
2444
2444.07
Panchayat-kendua, Village- lango, Habitation-Parsigajar at Block- Dumaria
-
-
-
Earth work in excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I.
37.5
5635
150.29
Distribution
Providing and supplying High Density Polyethylene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074
materials rates are Ex-factory excluding transportation, taxes and duties.
40mm HDPE Pipe-
50
3785
75.7
20 mm HDPE Pipe-
50
1250
25
Providing and supplying High Density Polyethylene (HDPE ) fittings of 20 mm to 225 mm OD and pressure
6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties.
5035
503
0.1
Lowering, Laying and Jointing H. D. P. E./M. D.P. E. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS Code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS- 7634 Part II.
For Rising
40 mm HDPE Pipe-
50
1150
23
20 mm HDPE Pipe-
50
600
12
Providing 15 mm dia. G.I. pipe Tata or equivalent make as per IS 1239 (Part 1/2004) ISI Mark /medium quality in Stand Post.
5
600
120.12
Supplying all materials , labour and tools for fixing 15 mm dia G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge.
5
67
13.59
Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I.
(1) Elbow (a) 15 mm dia.
10
807
80.78
(3) Nipple -
(a) 15 mm dia.
10
781
78.19
(4) Plain Socket -
(a) 15 mm dia.
10
769
76.99
Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main Including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dm ferrule weight not less than 425 gram.
5
3116
623.29
Providing and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra socket all complete as per specification and direction of E/I.
15 dia and weight not less than 400 Gm
5
997
199.58
Supplying materials , labours and equipment's for construction of 0.90M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform with stand post in house including
12 mm thick cement plaster in C.M. (1:4) with neat cement punning over exposed surface all complete job, as per approved design, specification and direction of E/I.
(As per Annexure II Attached)
1.20 M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform -
5
7000
1400
Providing brick masonry chamber of inner size 600 x 600 x 450 mm deep for bore well protection having 125 mm thick wall and 75 mm R.C.C cover including cement plaster of exposed surface, etc all complete job
1
2719
2719
Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge.
31.88
2994
93.93
Providing fitting & fixing 32 mm to 50 mm service HDPE saddle all complete job, as per approved design, specification and direction of E/I. (As per old model estimate)
5
270
54
Designing, Supplying, Installation, Testing & Commissioning with all tools & Parts of following Solar Photovoltaic (SPV) Solar Submersible D.C. Water Motor Pump Suitable for minimum 125mm x 115mm bore well as per MNRE Guideline with following specifications & accessories.
SPV arrays contains specified No of same capacity type & specification modules connected to series or parallel to obtained the required voltage & current the power output of individual PV modules should be minimum 200 watt peak.
i) The SPV modules should be as per IEC-61215 and
IEC 61730 part 1.0)
1
119000
119000
O & M Cost for 1st year (Excluding Repair Charges)
1
9000
9000
O & M cost for 2nd Year = O & M for 1st Yr + 6% of O&M for 1st Year + Annual repairing Charges
1
9617
9617.95
O & M cost for 3rd Year =1.06 x 2st year
1
10195
10195.03
O & M cost for 4th Year =1.06 x 3rd year
1
10806
10806.73
O & M cost for 5th Year =1.06 x 4th year
1
11455
11455.13
Provision of one no SIM card & its recharging cost for RMC
5
4000
800
Add 18% GST (9% CGST+ 9% SGST)
1
37282
37282.45
Add 1% Labour Cess
1
2444
2444.07
Panchayat-Khairbani, Village- Khairbani, Habitation-turigora at Block- Dumaria
-
-
-
Earth work in excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I.
37.5
5635
150.29
Distribution
Providing and supplying High Density Polyethylene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074
materials rates are Ex-factory excluding transportation, taxes and duties.
40mm HDPE Pipe-
50
3785
75.7
20 mm HDPE Pipe-
50
1250
25
Providing and supplying High Density Polyethylene (HDPE ) fittings of 20 mm to 225 mm OD and pressure
6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties.
5035
503
0.1
Lowering, Laying and Jointing H. D. P. E./M. D.P. E. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS Code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS- 7634 Part II.
For Rising
40 mm HDPE Pipe-
50
1150
23
20 mm HDPE Pipe-
50
600
12
Providing 15 mm dia. G.I. pipe Tata or equivalent make as per IS 1239 (Part 1/2004) ISI Mark /medium quality in Stand Post.
5
600
120.12
Supplying all materials , labour and tools for fixing 15 mm dia G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge.
5
67
13.59
Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I.
(1) Elbow (a) 15 mm dia.
10
807
80.78
(3) Nipple -
(a) 15 mm dia.
10
781
78.19
(4) Plain Socket -
(a) 15 mm dia.
10
769
76.99
Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main Including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dm ferrule weight not less than 425 gram.
5
3116
623.29
Providing and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra socket all complete as per specification and direction of E/I.
15 dia and weight not less than 400 Gm
5
997
199.58
Supplying materials , labours and equipment's for construction of 0.90M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform with stand post in house including
12 mm thick cement plaster in C.M. (1:4) with neat cement punning over exposed surface all complete job, as per approved design, specification and direction of E/I.
(As per Annexure II Attached)
1.20 M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform -
5
7000
1400
Providing brick masonry chamber of inner size 600 x 600 x 450 mm deep for bore well protection having 125 mm thick wall and 75 mm R.C.C cover including cement plaster of exposed surface, etc all complete job
1
2719
2719
Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge.
31.88
2994
93.93
Providing fitting & fixing 32 mm to 50 mm service HDPE saddle all complete job, as per approved design, specification and direction of E/I. (As per old model estimate)
5
270
54
Designing, Supplying, Installation, Testing & Commissioning with all tools & Parts of following Solar Photovoltaic (SPV) Solar Submersible D.C. Water Motor Pump Suitable for minimum 125mm x 115mm bore well as per MNRE Guideline with following specifications & accessories.
SPV arrays contains specified No of same capacity type & specification modules connected to series or parallel to obtained the required voltage & current the power output of individual PV modules should be minimum 200 watt peak.
i) The SPV modules should be as per IEC-61215 and
IEC 61730 part 1.0)
1
119000
119000
O & M Cost for 1st year (Excluding Repair Charges)
1
9000
9000
O & M cost for 2nd Year = O & M for 1st Yr + 6% of O&M for 1st Year + Annual repairing Charges
1
9617
9617.95
O & M cost for 3rd Year =1.06 x 2st year
1
10195
10195.03
O & M cost for 4th Year =1.06 x 3rd year
1
10806
10806.73
O & M cost for 5th Year =1.06 x 4th year
1
11455
11455.13
Provision of one no SIM card & its recharging cost for RMC
5
4000
800
Add 18% GST (9% CGST+ 9% SGST)
1
37282
37282.45
Add 1% Labour Cess
1
2444
2444.07
Panchayat-Khairbani, Village- damdi, Habitation-burukocha at Block- Dumaria
-
-
-
Earth work in excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I.
37.5
5635
150.29
Distribution
Providing and supplying High Density Polyethylene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074
materials rates are Ex-factory excluding transportation, taxes and duties.
40mm HDPE Pipe-
50
3785
75.7
20 mm HDPE Pipe-
50
1250
25
Providing and supplying High Density Polyethylene (HDPE ) fittings of 20 mm to 225 mm OD and pressure
6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties.
5035
503
0.1
Lowering, Laying and Jointing H. D. P. E./M. D.P. E. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS Code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS- 7634 Part II.
For Rising
40 mm HDPE Pipe-
50
1150
23
20 mm HDPE Pipe-
50
600
12
Providing 15 mm dia. G.I. pipe Tata or equivalent make as per IS 1239 (Part 1/2004) ISI Mark /medium quality in Stand Post.
5
600
120.12
Supplying all materials , labour and tools for fixing 15 mm dia G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge.
5
67
13.59
Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I.
(1) Elbow (a) 15 mm dia.
10
807
80.78
(3) Nipple -
(a) 15 mm dia.
10
781
78.19
(4) Plain Socket -
(a) 15 mm dia.
10
769
76.99
Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main Including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dm ferrule weight not less than 425 gram.
5
3116
623.29
Providing and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra socket all complete as per specification and direction of E/I.
15 dia and weight not less than 400 Gm
5
997
199.58
Supplying materials , labours and equipment's for construction of 0.90M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform with stand post in house including
12 mm thick cement plaster in C.M. (1:4) with neat cement punning over exposed surface all complete job, as per approved design, specification and direction of E/I.
(As per Annexure II Attached)
1.20 M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform -
5
7000
1400
Providing brick masonry chamber of inner size 600 x 600 x 450 mm deep for bore well protection having 125 mm thick wall and 75 mm R.C.C cover including cement plaster of exposed surface, etc all complete job
1
2719
2719
Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge.
31.88
2994
93.93
Providing fitting & fixing 32 mm to 50 mm service HDPE saddle all complete job, as per approved design, specification and direction of E/I. (As per old model estimate)
5
270
54
Designing, Supplying, Installation, Testing & Commissioning with all tools & Parts of following Solar Photovoltaic (SPV) Solar Submersible D.C. Water Motor Pump Suitable for minimum 125mm x 115mm bore well as per MNRE Guideline with following specifications & accessories.
SPV arrays contains specified No of same capacity type & specification modules connected to series or parallel to obtained the required voltage & current the power output of individual PV modules should be minimum 200 watt peak.
i) The SPV modules should be as per IEC-61215 and
IEC 61730 part 1.0)
1
119000
119000
O & M Cost for 1st year (Excluding Repair Charges)
1
9000
9000
O & M cost for 2nd Year = O & M for 1st Yr + 6% of O&M for 1st Year + Annual repairing Charges
1
9617
9617.95
O & M cost for 3rd Year =1.06 x 2st year
1
10195
10195.03
O & M cost for 4th Year =1.06 x 3rd year
1
10806
10806.73
O & M cost for 5th Year =1.06 x 4th year
1
11455
11455.13
Provision of one no SIM card & its recharging cost for RMC
5
4000
800
Add 18% GST (9% CGST+ 9% SGST)
1
37282
37282.45
Add 1% Labour Cess
1
2444
2444.07
Panchayat-Kharida, Village- Besarpahari, Habitation-sadamdera at Block- Dumaria
-
-
-
Earth work in excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I.
37.5
5635
150.29
Distribution
Providing and supplying High Density Polyethylene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074
materials rates are Ex-factory excluding transportation, taxes and duties.
40mm HDPE Pipe-
50
3785
75.7
20 mm HDPE Pipe-
50
1250
25
Providing and supplying High Density Polyethylene (HDPE ) fittings of 20 mm to 225 mm OD and pressure
6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties.
5035
503
0.1
Lowering, Laying and Jointing H. D. P. E./M. D.P. E. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS Code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS- 7634 Part II.
For Rising
40 mm HDPE Pipe-
50
1150
23
20 mm HDPE Pipe-
50
600
12
Providing 15 mm dia. G.I. pipe Tata or equivalent make as per IS 1239 (Part 1/2004) ISI Mark /medium quality in Stand Post.
5
600
120.12
Supplying all materials , labour and tools for fixing 15 mm dia G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge.
5
67
13.59
Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I.
(1) Elbow (a) 15 mm dia.
10
807
80.78
(3) Nipple -
(a) 15 mm dia.
10
781
78.19
(4) Plain Socket -
(a) 15 mm dia.
10
769
76.99
Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main Including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dm ferrule weight not less than 425 gram.
5
3116
623.29
Providing and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra socket all complete as per specification and direction of E/I.
15 dia and weight not less than 400 Gm
5
997
199.58
Supplying materials , labours and equipment's for construction of 0.90M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform with stand post in house including
12 mm thick cement plaster in C.M. (1:4) with neat cement punning over exposed surface all complete job, as per approved design, specification and direction of E/I.
(As per Annexure II Attached)
1.20 M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform -
5
7000
1400
Providing brick masonry chamber of inner size 600 x 600 x 450 mm deep for bore well protection having 125 mm thick wall and 75 mm R.C.C cover including cement plaster of exposed surface, etc all complete job
1
2719
2719
Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge.
31.88
2994
93.93
Providing fitting & fixing 32 mm to 50 mm service HDPE saddle all complete job, as per approved design, specification and direction of E/I. (As per old model estimate)
5
270
54
Designing, Supplying, Installation, Testing & Commissioning with all tools & Parts of following Solar Photovoltaic (SPV) Solar Submersible D.C. Water Motor Pump Suitable for minimum 125mm x 115mm bore well as per MNRE Guideline with following specifications & accessories.
SPV arrays contains specified No of same capacity type & specification modules connected to series or parallel to obtained the required voltage & current the power output of individual PV modules should be minimum 200 watt peak.
i) The SPV modules should be as per IEC-61215 and
IEC 61730 part 1.0)
1
119000
119000
O & M Cost for 1st year (Excluding Repair Charges)
1
9000
9000
O & M cost for 2nd Year = O & M for 1st Yr + 6% of O&M for 1st Year + Annual repairing Charges
1
9617
9617.95
O & M cost for 3rd Year =1.06 x 2st year
1
10195
10195.03
O & M cost for 4th Year =1.06 x 3rd year
1
10806
10806.73
O & M cost for 5th Year =1.06 x 4th year
1
11455
11455.13
Provision of one no SIM card & its recharging cost for RMC
5
4000
800
Add 18% GST (9% CGST+ 9% SGST)
1
37282
37282.45
Add 1% Labour Cess
1
2444
2444.07
Panchayat-Dholabera, Village- Kashibera, Habitation-khas at Block- Dumaria
-
-
-
Earth work in excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I.
37.5
5635
150.29
Distribution
Providing and supplying High Density Polyethylene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074
materials rates are Ex-factory excluding transportation, taxes and duties.
40mm HDPE Pipe-
50
3785
75.7
20 mm HDPE Pipe-
50
1250
25
Providing and supplying High Density Polyethylene (HDPE ) fittings of 20 mm to 225 mm OD and pressure
6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties.
5035
503
0.1
Lowering, Laying and Jointing H. D. P. E./M. D.P. E. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS Code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS- 7634 Part II.
For Rising
40 mm HDPE Pipe-
50
1150
23
20 mm HDPE Pipe-
50
600
12
Providing 15 mm dia. G.I. pipe Tata or equivalent make as per IS 1239 (Part 1/2004) ISI Mark /medium quality in Stand Post.
5
600
120.12
Supplying all materials , labour and tools for fixing 15 mm dia G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge.
5
67
13.59
Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I.
(1) Elbow (a) 15 mm dia.
10
807
80.78
(3) Nipple -
(a) 15 mm dia.
10
781
78.19
(4) Plain Socket -
(a) 15 mm dia.
10
769
76.99
Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main Including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dm ferrule weight not less than 425 gram.
5
3116
623.29
Providing and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra socket all complete as per specification and direction of E/I.
15 dia and weight not less than 400 Gm
5
997
199.58
Supplying materials , labours and equipment's for construction of 0.90M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform with stand post in house including
12 mm thick cement plaster in C.M. (1:4) with neat cement punning over exposed surface all complete job, as per approved design, specification and direction of E/I.
(As per Annexure II Attached)
1.20 M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform -
5
7000
1400
Providing brick masonry chamber of inner size 600 x 600 x 450 mm deep for bore well protection having 125 mm thick wall and 75 mm R.C.C cover including cement plaster of exposed surface, etc all complete job
1
2719
2719
Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge.
31.88
2994
93.93
Providing fitting & fixing 32 mm to 50 mm service HDPE saddle all complete job, as per approved design, specification and direction of E/I. (As per old model estimate)
5
270
54
Designing, Supplying, Installation, Testing & Commissioning with all tools & Parts of following Solar Photovoltaic (SPV) Solar Submersible D.C. Water Motor Pump Suitable for minimum 125mm x 115mm bore well as per MNRE Guideline with following specifications & accessories.
SPV arrays contains specified No of same capacity type & specification modules connected to series or parallel to obtained the required voltage & current the power output of individual PV modules should be minimum 200 watt peak.
i) The SPV modules should be as per IEC-61215 and
IEC 61730 part 1.0)
1
119000
119000
O & M Cost for 1st year (Excluding Repair Charges)
1
9000
9000
O & M cost for 2nd Year = O & M for 1st Yr + 6% of O&M for 1st Year + Annual repairing Charges
1
9617
9617.95
O & M cost for 3rd Year =1.06 x 2st year
1
10195
10195.03
O & M cost for 4th Year =1.06 x 3rd year
1
10806
10806.73
O & M cost for 5th Year =1.06 x 4th year
1
11455
11455.13
Provision of one no SIM card & its recharging cost for RMC
5
4000
800
Add 18% GST (9% CGST+ 9% SGST)
1
37282
37282.45
Add 1% Labour Cess
1
2444
2444.07
Panchayat-Barakanjiya, Village-Dumaria, Habitation- Bazar tola at Block- Dumaria
-
-
-
Cost of Transportation and other miscellanies charge ,for setting the ring machine at site etc all complete job as per direction of E/I.
1
4950
4950
Drilling of 300mm dia perfectly vertical bore hole, by mechanical Rotary Rig Machine for the specified depth below ground level in all types of soil, moorum, etc which solid core cannot be retained ,having unconfined aquifer, including all works pertaining to it and bending the casing pipe, at least 0.30m(from 0to 48meters depth below ground level as per direction of E/I
0.00m to 48.00m(av. depth). DWSD Item 118 (i)
70
59290
847
Drilling in all kinds of soil and rock in rural areas with D.T.H. Rig Machine, all complete including supplying of all materials, labour, tools, drilling rig machine ,air compressor and equipment’s as well as fuel, lubricants for making 115mmdia boring and cost of transportation charge of rig machine and other vehicle to site the work site as per specification & direction of E/I. DWSD Item 121 (ii)
30
15114
503.8
Cost of 125 mm dia blue UPVC Casing Pipe as per IS:12818:2016 CML no- 5543459. (DWSD 108)
48
27447
571.83
Supplying all materials, labour and inserting UPVC blue pipe 125 mm internal dia casing pipe for protecting the bore hole in over burden up to hard surface as per IS 12818-1392 with latest revision all complete job with taxes as per specification and direction of E/I Supplying all materials, labour and inserting UPVC blue pipe 125 mm internal dia casing pipe for protecting the bore hole in over burden up to hard surface as per IS 12818-1392 with latest revision all complete job with taxes as per specification and direction of E/I. (DWSD Item 125)
48
741
15.45
Providing and fixing centralizing guide to the well assembly at each and of slotted pipe to keep the assembly in the center of the hole so that to provide an even thickness of gravel pack.
3
450
150
Supplying labours and equipment’s including 125mm dia G.I. Cap & fitting and fixing over the casing pipe of bore well properly and taking it out as per direction of E/I (The Cap will be the property of Contractor)Supplying labours and equipment’s including 125mm dia G.I. Cap & fitting and fixing over the casing pipe of bore well properly and taking it out as per direction of E/I (The Cap will be the property of Contractor). DWSD Item 128
1
154
154
Providing gravel packing with approved best quality gravel in uniformly graded size between 3.16mm(1/8’’)to 9.53mm(3/8’’) including collection ,stacking ,washing &packing in the annular space between the bore hole and the other surface of casing pipe in layer of suitable thickness in the under space as required rate by manual , including all lead& lift ,tec. All complete as per direction of E/I
2.55
4628
1815
Providing & supplying all labours, tools and plant for developing the gravel packed T/Well by use of compressed air for minimum 8 hours complete to make T/Well free from sand as per direction of E/I.
1
6600
6600
Supplying of 125 mm dia. Ribbed screen pipe confirming to IS:12818:2016 (CML no- 1543459) latest revision including carriage. (DWSD Item 134)
15
10931
728.75
Earth work in excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I.
49.33
7413
150.29
Distribution
Providing and supplying High Density Polyethylene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074
materials rates are Ex-factory excluding transportation, taxes and duties.
40mm HDPE Pipe-
80
6056
75.7
20 mm HDPE Pipe-
51.54
1288
25
Providing and supplying High Density Polyethylene (HDPE ) fittings of 20 mm to 225 mm OD and pressure
6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties.
5035
503
0.1
Lowering, Laying and Jointing H. D. P. E./M. D.P. E. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS Code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS- 7634 Part II.
For Rising
40 mm HDPE Pipe-
50
1150
23
20 mm HDPE Pipe-
51.54
618
12
Providing 15 mm dia. G.I. pipe Tata or equivalent make as per IS 1239 (Part 1/2004) ISI Mark /medium quality in Stand Post.
5
600
120.12
Supplying all materials , labour and tools for fixing 15 mm dia G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge.
5
67
13.59
Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I.
(1) Elbow (a) 15 mm dia.
10
807
80.78
(3) Nipple -
(a) 15 mm dia.
10
781
78.19
(4) Plain Socket -
(a) 15 mm dia.
10
769
76.99
Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main Including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dm ferrule weight not less than 425 gram.
5
3116
623.29
Providing and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra socket all complete as per specification and direction of E/I.
15 dia and weight not less than 400 Gm
5
997
199.58
Supplying materials , labours and equipment's for construction of 0.90M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform with stand post in house including
12 mm thick cement plaster in C.M. (1:4) with neat cement punning over exposed surface all complete job, as per approved design, specification and direction of E/I.
(As per Annexure II Attached)
1.20 M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform -
5
7000
1400
Providing brick masonry chamber of inner size 600 x 600 x 450 mm deep for bore well protection having 125 mm thick wall and 75 mm R.C.C cover including cement plaster of exposed surface, etc all complete job
1
2719
2719
Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge.
41.93
3938
93.93
Providing fitting & fixing 32 mm to 50 mm service HDPE saddle all complete job, as per approved design, specification and direction of E/I. (As per old model estimate)
5
270
54
O & M Cost for 1st year (Excluding Repair Charges)
1
9000
9000
O & M cost for 2nd Year = O & M for 1st Yr + 6% of O&M for 1st Year + Annual repairing Charges
1
9637
9637.55
O & M cost for 3rd Year =1.06 x 2st year
1
10215
10215.81
O & M cost for 4th Year =1.06 x 3rd year
1
10828
10828.75
O & M cost for 5th Year =1.06 x 4th year
1
11478
11478.48
Provision of one no SIM card & its recharging cost for RMC
5
4000
800
Add 18% GST (9% CGST+ 9% SGST)
1
40238
40238.78
Add 1% Labour Cess
1
2640
2640
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements