Drinking Water And Sanitation Department Tender
Search from across the categories, cities, and authorities to find the latest Jharkhand tenders. Every Jharkhand tender is curated from credible sources of government websites (eProcurement Jharkhand portal) and newspapers, thus ensuring the credibility of the information presented to you. For more information on Jharkhand tender bidder registration, the login process and more read the FAQs section on this page.
Costs
EMD
₹ 82,900Document Cost
₹ 5,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_DWSD_47785_9Bid Award Id
ViewTender No
DIFFERENT TOLA SVS-36/2020-21Tender Authority
Drinking Water And Sanitation Department ViewPurchaser Address
-Website
http://https://jalshakti-ddws.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
(a) 0.00m up to 30.00m depth below G.L. in rural areas
30
-
457.61
... More
(b) 30.00m up to 120.00m depth beyond in rural areas
60
-
485.67
... More
Basic rate of 125mm dia Blue UPVC casing pipe confirmation to I.S.I. latest revision IS(12818)/2016C.M.L. No-5543459
30
-
478.5
... More
Supplying all materials labour and inserting UPVC blue pipe 125mm internal dia casing pipe for protecting the bore hole in over burden up to hard surface as per IS 12818-1392 with latest revision all complete job with taxes as per specification and direction of E/I.
30
-
12.37
... More
Supplying labour cement and calcium chloride or bentonite solution and equipment's for grouting casing pipe.
1
-
155.21
... More
Supplying labour, cement and calcium chloride or betonies solution and equipment's for grouting to casing pipe after lowering in the bore etc all complete as per specification and direction of E/I.
0.5
-
3140.17
... More
Supplying labours and equipment's including 125mm dia G.I. Cap & fitting and fixing over the casing pipe of bore well properly and taking it out as per direction of E/I.
1
-
123.2
... More
Supplying materials and labours for constructing bore well chamber of 75B designation brick masonry chamber 600mm x 450mm and 750mm deep internal dimension having 250mm thickness in cement mortar 1:6 including 12mm cement plaster 1:6 with 600mm x 475mm RCC cover with earth work in excavation and 75mm thick PCC(1:3:6) in foundation and refilling all complete as per specification and direction of E/I.
1
-
4961
... More
Part-2 : Provision of 2 H. P., D. C. Solar Motor Pump Complete Set
-
-
-
... More
Designing, Supplying, Installation, Testing & commissioning with all tools & Parts of following Solar Photovoltaic (SPV) Solar Submersible D.C. Water Motor Pump Suitable for minimum 125mm x 115mm bore well as per MNRE Guideline with following specification & accessories.
-
-
-
... More
SPV arrays contains specified No of same capacity type & specification modules connected to series or paralled to obtained the required voltage & current the power output of individual PV modules should be minimum 200 watt peak.
-
-
-
... More
i) The SPV modules should be as per IEC-61215 and IEC 61730 part:1.0)
-
-
-
... More
ii) All external parts of motor pump used in submersible pump which are in contact of water is stainless steel grade 303 or higher as required.
-
-
-
... More
iii) The PV modules should be mounted on metallic structure of adequate strength and appropriate design which can withstand load of modules & High wind pressure up to 200Km/H
-
-
-
... More
iv) The module mounting structure should be hot dip galvanized according to IS 4759.
-
-
-
... More
v) To enhance the performace of SPV water pumping system & arrangement for seasonal tilt angle Adjustment should be provided
-
-
-
... More
vi) Necessary arrangement should be provided in controlled automatic start-run-stop through out the day with water level detection system. (As per MNRE specifications)
-
-
-
... More
vii) Necessary protection such as lightening arrestor etc. should be provided to protect the controller & SPV
-
-
-
... More
viii) The suction/delivery pipe shall be UPVC/H.D.P.E. pipes of appropriate size 60m or more as required minimum pressure rating of 8kg/sq cm-PE 100 grade for pump up to 3HP & 10 Kg/Sq cm - PE100 grade for 5HP.
-
-
-
... More
ix) All cable used shall be as per IS 694, suitable size of cable shall be used in sufficient length for inter connection between the SPV array to SPV controller and SPV controller to solar power pump. Provision of cable shall be as per IS 14536.
-
-
-
... More
x) The motor pump set should have a 5 Years warranty.
-
-
-
... More
xi) Control panel suitable for motor pump with arrangement of dry run & over flow protection sensor, float switch & rain prevention box.(as per MNRE specification)
-
-
-
... More
xii) The SPV controller must have IP-65 protection or must be housed in cabinet having at least IP - 65 protection.
-
-
-
... More
xiii) The system should be as per MNRE guide line & Ecofriendly with suitable arrangement to operate new pump manually.
-
-
-
... More
xiv) With third party insepction before dispatch.
-
-
-
... More
xv) Provision for web based remote monitoring of the pumps to be installed must be made through the inbuilt controllers. It should be possible to ascertain the daily water output, the power generated by PV Array the Up and down time of the pump during the year number of days the pump was unused or under breakdown repairs.
-
-
-
... More
The following details should be marked indelibly on the motor pump set
-
-
-
... More
a) Name of the Manufacturer or Distinctive Logo.
-
-
-
... More
b) Model Number.
-
-
-
... More
c) Serial Number
-
-
-
... More
Solar sumbersible motor pump (SPV DC Type)
-
-
-
... More
i) 2 HP (DC Pump) with 1800 wp minimum watt P.V. Panel as MNRE pump head Max Shut-Off head up to 100mtrs. For higher or lower head or in between various modules output could be decided on prorates basis.
1
-
170820
... More
Provision of Solar night Lamp.
1
-
1000
... More
Part-3 : 8000 Litre capacity R.C.C. Water Tank (2.1 x 2.1 x 2.1m Internal size) with 8M staging having Utility Room at Ground Level.
-
-
-
... More
Earth work in excavation in foundation trenches in ordinary soil(vide classification of soil item-B) and isposal of excavated earth as obtained to a distance up to 50m including all lifts, levelling, ramming the foundation trenches, removing roots of trees shrubs all complete as per approved design, building specification and direction of E/I.
20.11
-
120.53
... More
Providing P.C.C. M-150 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, mixing cement concrete in mixer and placing in position, vibrating, curing, taxes and royalty all complete as per building specification direction of E/I.
1.59
-
5358.83
... More
Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, 'plywood form work, bully/steel propups, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (excluding M.S. or Tor reinforcement) Section-G-Plain and Reinforced Cement Concrete-item 10 b
2.8
-
5997
... More
Providing and casting in situ Cement Concrete of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, 'plywood formwork, bully/steel prop-ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only.Use of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted) (excluding M.S, or Tor reinforcement) For RCC M-250 grade Column Section-G-Plain and Reinforced Cement Concrete-item 11 b +11 c
-
-
-
... More
Column up to G.L. & G.L. to roof beam of Utility Room
1.96
-
7338
... More
A. Column Utility Room. Roof beam to Tank beam M-25
1.26
-
8071.8
... More
B. Column Tank beam to tank Roof M-30
0.36
-
8081.7
... More
Providing and casting in situ Cement Concrete of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, 'plywood formwork, bully/steel prop-ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted) (excluding M.S, or Tor reinforcement) For RCC M-250 grade Beams/Braces/Lintels -Section-G-Plain and Reinforced Cement Concrete-item 13 C
-
-
-
... More
Bracing at Utility Room roof level M-25 - 0.54
1.14
-
8599.8
... More
Beam of Tank Floor M-30
0.54
-
8610.8
... More
Providing and casting in situ Cement Concrete of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, 'plywood formwork, bully/steel prop-ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted) (excluding M.S, or Tor reinforcement) For RCC M-300 grade Slabs / Landings / Vertical Walls
-
-
-
... More
Slabs Landings
4.3
-
9393.6
... More
Vertical Walls
0.98
-
9381.6
... More
Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads including cost of materials,labours,royalityand taxes all complete as per building specification and direction of E/I.
0.38
-
223.35
... More
Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes royalty all complete as per building specification and direction of E/I.
3.99
-
238.38
... More
Filling in foundation trenches and plinth in layers not exceeding 150mm thick, well watered,rammed,fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50M and lift of 1.5M all complete as per building specifications and direction of E/I.(Mode of measurement-compacted volume)
16.23
-
39.82
... More
Providing designation 75 A Brick work in C.M(1:6) in foundation and plinth with approved quality of clean coarse sand of F.M.2 to2.5 including providing 10mm thick mortar joints, cost of screening,scaffolding,raking out joints to 15mm depth,curing,taxes and royalty all complete as per building specification and direction of E/I
0.98
-
3840.03
... More
Providing designation 75A Brick work in C.M(1:6) in superstructure with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10mm thick mortar joints, cost of screening,scaffolding,raking out joints 15mm depth,curing,taxes and royalty all complete as per bldg. specification and direction of E/I
2.12
-
3936.43
... More
Providing R.C.C.M-150 in nominal mix of (1:2:4) in lintel with approved quality of stone chips (20mm to 6mm size) graded and clean coarse of F.M 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating striking, curing(but excluding the cost of reinforcement),taxes and royalty all complete as per building specification and direction of E/I.
0.09
-
6869.9
... More
Providing av.63 mm thick R.C.C M-200 in nominal mix of (1:1.5:3) chhajja with approved quality of stone chips (20mm to 6mm size) graded and clean coarse sand of F.M 2.5 to 3 including in mixer and placing in position,vibrating,striking,6mm cement plaster(1:4) in ceiling and sides of chhajja with sand of F.M 1.5, curing(but excluding the cost of reinforcement) taxes, and royalty all complete as per building specification and direction of E/I.
1.08
-
990.51
... More
Providing T.M.T steel reinforcement of different dia rods as per approved design and drawing including carriage of M.S bars to work site, cutting bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.
1.04
-
65841.44
... More
Supplying, fitting and fixing M.S grill made of 20*6 mmM.S flats as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I.
Window-
36
-
73.74
... More
Providing and fixing fan hooks of 16 mm dia M.S.bar & 1 meter long bent to required size and shape, placed in position and fixed in the R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/I.
1
-
114.31
... More
Supplying, fitting and fixing 20 gauge G.C.I sheet gate fitted on M.S angle frame of size 60*60*6 mm including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in C/C(1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.
2.88
-
3518.2
... More
Providing 12 mm cement plaster (1:4) with clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water,scaffolding,taxes and royalty all complete as per building specification and direction of E/I.
63.36
-
133.47
... More
Providing 12 mm cement plaster (1:6) with clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water,scaffolding,taxes and royalty all complete as per building specification and direction of E/I.
39.36
-
124.6
... More
Providing 6 mm cement plaster (1:4 ) in ceiling with clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water,scaffolding,taxes and royalty all complete as per building specification and direction of E/I.
10.89
-
136.62
... More
Providing 12 mm cement plaster (1:3) with clean coarse sand of F.M 1.5 with floating coat of neat cement in skirting including rounding of junctions with floor,curing,taxes and royalty all complete as per building specification and direction of E/I.
5.97
-
186.45
... More
Providing 19 mm water proof cement plaster (1:3) with clean coarse sand of F.M 1.5 with 5% cico or any other approved water proofing compound including cost of screening, curing with all leads and lifts of water,scaffolding,taxes and royalty all complete as per building specification and direction of E/I.
22.05
-
186.45
... More
Providing 1.5 mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I.
22.05
-
43.15
... More
Providing two coats of snowcem of approved shade and make over old surface including washing, cleaning, sand papering the wall,scaffolding,curing and taxes all complete as per building specification & direction of E/I.
120.72
-
85.55
... More
Extra for each coat of cement wash, distemper paint or snowcem over exterior surface for each consecutive floor above first floor including scaffolding etc all complete as per building specification & direction of E/I.
66
-
14.68
... More
Providing two coats of synthetic enamel paint of approved shade and make over steel surface throughly,scaffolding and taxes all papering including cost of scaffolding and taxes all complete as per building specification & direction of E/I.
6.48
-
53.71
... More
Providing and fixing G.I. pipe railing having 1.0 M height consisting 50 x 50 x 6 mm thick M. S. angles as verticals at 1.5 M c/c, and additional posts at every corner with 3 rows of 25 mm dia G.I. pipes of medium class variety as horizontal and painting 3 coats of oil paint over 1 coat of anticorrosive paint of approved colour and shade including cost of all labour, transporting bends to curved shape, etc. complete. Section-H-Miscellaneous Works 48 item -1
6.75
-
873
... More
Providing and fixing in position M.S. ladder 0.50 M wide consisting of 75 x 10 mm M.S. flats as stringers and 16 mm dia M.S. bars in double rows as steps placed at 25 cm c/c including cost of material and labour involved, welding, anchoring and applying 3 coat of anti-corrosive paint, etc. complete as directed by Engineer-in-charge. Section-K-ANCILLARY ITEMS FOR RESERVOIRS 225 Item No-5
11.5
-
1362
... More
Carriage of Materials 5%
1
-
13511.99
... More
Part 4: Rising and Distribution Network with House Connection up to 36Nos. Including Platform & Stand Post.
-
-
-
... More
Earth Work in Excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtrs. Including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I.
-
-
-
... More
For Rising Main
-
-
-
... More
50mm HDPE Pipe-6M
-
-
-
... More
65mm HDPE Pipe-6M
-
-
-
... More
Distribution
-
-
-
... More
63mm HDPE Pipe-6M
-
-
-
... More
50mm HDPE Pipe-72M
-
-
-
... More
32mm HDPE Pipe-144M
-
-
-
... More
20mm HEPE Pipe-216M
-
-
-
... More
Total-450M
450
-
109.19
... More
Dismantling plain cement concrete work including stacking serviceable materials in countable stacks within 15M lead and Disposal of unserviceable materials with all leads all complete
5.59
-
688.52
... More
Providing PCC M-200 with nominal mix of (1:1.5:3) with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of FM 2.5 to 3.0 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, sticking, curing taxes and royalty all complete as per specification and direction of E/I.
5.59
-
5358.83
... More
Rising Main
-
-
-
... More
Manufacture, supply and Delivery of following Nominal dia UPVC column pipes including PVC socket(Coupler),
-
-
-
... More
65mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:74.5 to 75.2mm wall Thickness End:9mm to 10.7mm, Barrel 9mm to 10.7mm, Length:3Mtrs. Rising main
15
-
221
... More
50mm dia-Density of pipe 1.38 to 1.43 Gm per Cm3 OD:87.5 to 88.2mm wall thickness End:9.8mm to 11.9MM, Barrel 7.3mm to 9mm, Length, 3Mtrs. Delivery Pipe
15
-
157
... More
Distribution
-
-
-
... More
Providing and supplying High Density Polyethylene pipe (HDPE pipe) of 20mm to 225mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI - 4984/14151/12786/13488, ISO 4427, DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties PE-80, PN-10
-
-
-
... More
63mm HDPE Pipe-
15
-
163.93
... More
50mm HDPE Pipe-
180
-
103.9
... More
32mm HDPE Pipe-
360
-
43.53
... More
20mm HDPE Pipe- MJP 19-20 sec-I-X sl no.-1A-
540
-
23
... More
Providing and fixing Gun Metal Gate valve with C I wheel of approved quality (screwed end) DSR 18.17.5
-
-
-
... More
50mm dia
1
-
1342.07
... More
65mm dia
1
-
1488.1
... More
Providing and supplying High Density Polyethylene (HDPE) fittings of 20mm to 225mm OD and pressure 6.0Kg/cm2 and 10Kg/CM2 suitable for water supply which is available in all standard conforming to ISI-- 4984/14151/12786/13488, ISO 4427, DIN- 8074 materials rates are Ex-factory excluding transportation, taxes and duties PE-80, PN-10
1
-
3683.17
... More
Lowering, Laying and Jointing H.D.P.E./M.D.P.E. Pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labour as directed by engineer in charge as per IS-7634 Part II. MJP 19-20 sec i-IX sl no-2(i)
-
-
-
... More
For Rising
-
-
-
... More
50mm HDPE Pipe-
15
-
34
... More
65mm HDPE Pipe-
15
-
41
... More
Distribution
-
-
-
... More
65mm HDPE Pipe-
15
-
41
... More
50mm HDPE Pipe-
180
-
34
... More
32mm HDPE Pipe-
360
-
21
... More
20mm Hdpe pipe
540
-
11
... More
Providing 15mm dia. G.I. pipe TATA or equivalent make as per IS 1239(Part 1/2004) ISI Mark/medium quality in Stand Post. DWSD SI. 9K(including CP+OHC)
36
-
119.65
... More
Supplying all materials, labour and tools for fixing 15mm dia G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge
36
-
9.97
... More
Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I.DWSD 3.1.13
-
-
-
... More
(1) Elbow
-
-
-
... More
(a) 15mm dia.
72
-
61.25
... More
(2) Reducer Socket.
-
-
-
... More
(a) 20 x 15mm dia
36
-
65.72
... More
(3) Nipple-
-
-
-
... More
(a) 15mm dia.
72
-
60.16
... More
(4) Plain Socket-
-
-
-
... More
(a) 15mm dia.
72
-
59.07
... More
Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main Including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3mm 6mm 10mm dm ferrule weight not less than 425 gram.
36
-
497.31
... More
Providing and fixing of male ended C.I. Body brass spindle valve and seat Bib cock of approved quality with extra socket all complete as per specification and direction of E/I.
15 dia and weight not less than 400Gm
36
-
165.73
... More
Providing and fixing Gun metal full way valve of approved quality, all complete, as per specification and direction of E/I.
-
-
-
... More
50mm dia and weight not less than 1.5KG
1
-
1342.07
... More
65mm dia full way valve
1
-
1488.1
... More
Construction masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4(1cement:4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix(1 cement:2coarse sand :4graded stone aggregate 20mm nominal size), i/c necessary excavation, foundation concrete 1:5:10(1cement : 5fine sand :10graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3(1 cement :3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5.
Full way valve chamber
2
-
1582.45
... More
Providing brick masonry chamber of inner size 600 x 600 x 450mm deep for bore well protection having 125mm thick wall and 75mm R.C.C. cover including cement plaster of exposed surfce, etc all complete job.
1
-
2148
... More
Supplying materials, labours and equipment's for construction of 0.90m x 0.90m sizeP.C.C. (1:2:4) Rectangular Platform with stand post in house inclduing 12mm thick cement plasrter in C.M. (1:4) with
36
-
1256
... More
Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in -Charge
382.5
-
68.25
... More
Providing fitting & fixing 32mm to 50mm service HDPE saddle all complete job, as per approved design, specification and direction of E/I.
36
-
54
... More
Part-5: Annual Operation & Maintenance cost based on Existing D/T Well with solar motor pump for 5 years.
-
-
-
... More
O & M Cost for 1st Year
1
-
9000
... More
O & M Cost for 2nd Year
1
-
11686.29
... More
O & M Cost for 3rd Year 11686.29 x 1.06
1
-
12387.47
... More
O & M Cost for 4th Year 12387.47 x 1.06
1
-
13130.71
... More
O & M Cost for 5th Year 13130.71 x 1.06
1
-
13918.56
... More
Provision of one no. SIM card & its recharing cost for RMC
5
-
800
... More
Model No. : 2(Nadi Paar Tola)
-
-
-
... More
Part-1 :- Construction of 125mm x 115mm x 90.00m deep Drilled Tube Well
-
-
-
... More
Supplying all materials, labour and tools and equipment for drilling 125 x 115mm dia bore well in any kinds of soil and rocks by using D.T.H. super rig maching and ball hammer technology including all technology inclusive of mobilization, demobilization of rigs air compressor all accessories of rigs tools and plant labour etc. all complete job including transportation charge cost of flushing charge, geographical investigation etc. all complete.
-
-
-
... More
(a) 0.00m up to 30.00m depth below G.L. in rural areas
30
-
457.61
... More
(b) 30.00m up to 120.00m depth beyond in rural areas
60
-
485.67
... More
Basic rate of 125mm dia Blue UPVC casing pipe confirmation to I.S.I. latest revision IS(12818)/2016C.M.L. No-5543459
30
-
478.5
... More
Supplying all materials labour and inserting UPVC blue pipe 125mm internal dia casing pipe for protecting the bore hole in over burden up to hard surface as per IS 12818-1392 with latest revision all complete job with taxes as per specification and direction of E/I.
30
-
12.37
... More
Supplying labour cement and calcium chloride or bentonite solution and equipment's for grouting casing pipe.
1
-
155.21
... More
Supplying labour, cement and calcium chloride or betonies solution and equipment's for grouting to casing pipe after lowering in the bore etc all complete as per specification and direction of E/I.
0.5
-
3140.17
... More
Supplying labours and equipment's including 125mm dia G.I. Cap & fitting and fixing over the casing pipe of bore well properly and taking it out as per direction of E/I.
1
-
123.2
... More
Supplying materials and labours for constructing bore well chamber of 75B designation brick masonry chamber 600mm x 450mm and 750mm deep internal dimension having 250mm thickness in cement mortar 1:6 including 12mm cement plaster 1:6 with 600mm x 475mm RCC cover with earth work in excavation and 75mm thick PCC(1:3:6) in foundation and refilling all complete as per specification and direction of E/I.
1
-
4961
... More
Part-2 : Provision of 2 H. P., D. C. Solar Motor Pump Complete Set
-
-
-
... More
Designing, Supplying, Installation, Testing & commissioning with all tools & Parts of following Solar Photovoltaic (SPV) Solar Submersible D.C. Water Motor Pump Suitable for minimum 125mm x 115mm bore well as per MNRE Guideline with following specification & accessories.
-
-
-
... More
SPV arrays contains specified No of same capacity type & specification modules connected to series or paralled to obtained the required voltage & current the power output of individual PV modules should be minimum 200 watt peak.
-
-
-
... More
i) The SPV modules should be as per IEC-61215 and IEC 61730 part:1.0)
-
-
-
... More
ii) All external parts of motor pump used in submersible pump which are in contact of water is stainless steel grade 303 or higher as required.
-
-
-
... More
iii) The PV modules should be mounted on metallic structure of adequate strength and appropriate design which can withstand load of modules & High wind pressure up to 200Km/H
-
-
-
... More
iv) The module mounting structure should be hot dip galvanized according to IS 4759.
-
-
-
... More
v) To enhance the performace of SPV water pumping system & arrangement for seasonal tilt angle Adjustment should be provided
-
-
-
... More
vi) Necessary arrangement should be provided in controlled automatic start-run-stop through out the day with water level detection system. (As per MNRE specifications)
-
-
-
... More
vii) Necessary protection such as lightening arrestor etc. should be provided to protect the controller & SPV
-
-
-
... More
viii) The suction/delivery pipe shall be UPVC/H.D.P.E. pipes of appropriate size 60m or more as required minimum pressure rating of 8kg/sq cm-PE 100 grade for pump up to 3HP & 10 Kg/Sq cm - PE100 grade for 5HP.
-
-
-
... More
ix) All cable used shall be as per IS 694, suitable size of cable shall be used in sufficient length for inter connection between the SPV array to SPV controller and SPV controller to solar power pump. Provision of cable shall be as per IS 14536.
-
-
-
... More
x) The motor pump set should have a 5 Years warranty.
-
-
-
... More
xi) Control panel suitable for motor pump with arrangement of dry run & over flow protection sensor, float switch & rain prevention box.(as per MNRE specification)
-
-
-
... More
xii) The SPV controller must have IP-65 protection or must be housed in cabinet having at least IP - 65 protection.
-
-
-
... More
xiii) The system should be as per MNRE guide line & Ecofriendly with suitable arrangement to operate new pump manually.
-
-
-
... More
xiv) With third party insepction before dispatch.
-
-
-
... More
xv) Provision for web based remote monitoring of the pumps to be installed must be made through the inbuilt controllers. It should be possible to ascertain the daily water output, the power generated by PV Array the Up and down time of the pump during the year number of days the pump was unused or under breakdown repairs.
-
-
-
... More
The following details should be marked indelibly on the motor pump set
-
-
-
... More
a) Name of the Manufacturer or Distinctive Logo.
-
-
-
... More
b) Model Number.
-
-
-
... More
c) Serial Number
-
-
-
... More
Solar sumbersible motor pump (SPV DC Type)
-
-
-
... More
i) 2 HP (DC Pump) with 1800 wp minimum watt P.V. Panel as MNRE pump head Max Shut-Off head up to 100mtrs. For higher or lower head or in between various modules output could be decided on prorates basis.
1
-
170820
... More
Provision of Solar night Lamp.
1
-
1000
... More
Part-3 : 8000 Litre capacity R.C.C. Water Tank (2.1 x 2.1 x 2.1m Internal size) with 8M staging having Utility Room at Ground Level.
-
-
-
... More
Earth work in excavation in foundation trenches in ordinary soil(vide classification of soil item-B) and isposal of excavated earth as obtained to a distance up to 50m including all lifts, levelling, ramming the foundation trenches, removing roots of trees shrubs all complete as per approved design, building specification and direction of E/I.
20.11
-
120.53
... More
Providing P.C.C. M-150 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, mixing cement concrete in mixer and placing in position, vibrating, curing, taxes and royalty all complete as per building specification direction of E/I.
1.59
-
5358.83
... More
Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, 'plywood form work, bully/steel propups, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (excluding M.S. or Tor reinforcement) Section-G-Plain and Reinforced Cement Concrete-item 10 b
2.8
-
5997
... More
Providing and casting in situ Cement Concrete of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, 'plywood formwork, bully/steel prop-ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only.Use of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted) (excluding M.S, or Tor reinforcement) For RCC M-250 grade Column Section-G-Plain and Reinforced Cement Concrete-item 11 b +11 c
-
-
-
... More
Column up to G.L. & G.L. to roof beam of Utility Room
1.96
-
7338
... More
A. Column Utility Room. Roof beam to Tank beam M-25
1.26
-
8071.8
... More
B. Column Tank beam to tank Roof M-30
0.36
-
8081.7
... More
Providing and casting in situ Cement Concrete of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, 'plywood formwork, bully/steel prop-ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted) (excluding M.S, or Tor reinforcement) For RCC M-250 grade Beams/Braces/Lintels -Section-G-Plain and Reinforced Cement Concrete-item 13 C
-
-
-
... More
Bracing at Utility Room roof level M-25 - 0.54
1.14
-
8599.8
... More
Beam of Tank Floor M-30
0.54
-
8610.8
... More
Providing and casting in situ Cement Concrete of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, 'plywood formwork, bully/steel prop-ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted) (excluding M.S, or Tor reinforcement) For RCC M-300 grade Slabs / Landings / Vertical Walls
-
-
-
... More
Slabs Landings
4.3
-
9393.6
... More
Vertical Walls
0.98
-
9381.6
... More
Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads including cost of materials,labours,royalityand taxes all complete as per building specification and direction of E/I.
0.38
-
223.35
... More
Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes royalty all complete as per building specification and direction of E/I.
3.99
-
238.38
... More
Filling in foundation trenches and plinth in layers not exceeding 150mm thick, well watered,rammed,fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50M and lift of 1.5M all complete as per building specifications and direction of E/I.(Mode of measurement-compacted volume)
16.23
-
39.82
... More
Providing designation 75 A Brick work in C.M(1:6) in foundation and plinth with approved quality of clean coarse sand of F.M.2 to2.5 including providing 10mm thick mortar joints, cost of screening,scaffolding,raking out joints to 15mm depth,curing,taxes and royalty all complete as per building specification and direction of E/I
0.98
-
3840.03
... More
Providing designation 75A Brick work in C.M(1:6) in superstructure with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10mm thick mortar joints, cost of screening,scaffolding,raking out joints 15mm depth,curing,taxes and royalty all complete as per bldg. specification and direction of E/I
2.12
-
3936.43
... More
Providing R.C.C.M-150 in nominal mix of (1:2:4) in lintel with approved quality of stone chips (20mm to 6mm size) graded and clean coarse of F.M 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating striking, curing(but excluding the cost of reinforcement),taxes and royalty all complete as per building specification and direction of E/I.
0.09
-
6869.9
... More
Providing av.63 mm thick R.C.C M-200 in nominal mix of (1:1.5:3) chhajja with approved quality of stone chips (20mm to 6mm size) graded and clean coarse sand of F.M 2.5 to 3 including in mixer and placing in position,vibrating,striking,6mm cement plaster(1:4) in ceiling and sides of chhajja with sand of F.M 1.5, curing(but excluding the cost of reinforcement) taxes, and royalty all complete as per building specification and direction of E/I.
1.08
-
990.51
... More
Providing T.M.T steel reinforcement of different dia rods as per approved design and drawing including carriage of M.S bars to work site, cutting bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.
1.04
-
65841.44
... More
Supplying, fitting and fixing M.S grill made of 20*6 mmM.S flats as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I.
Window-
36
-
73.74
... More
Providing and fixing fan hooks of 16 mm dia M.S.bar & 1 meter long bent to required size and shape, placed in position and fixed in the R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/I.
1
-
114.31
... More
Supplying, fitting and fixing 20 gauge G.C.I sheet gate fitted on M.S angle frame of size 60*60*6 mm including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in C/C(1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.
2.88
-
3518.2
... More
Providing 12 mm cement plaster (1:4) with clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water,scaffolding,taxes and royalty all complete as per building specification and direction of E/I.
63.36
-
133.47
... More
Providing 12 mm cement plaster (1:6) with clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water,scaffolding,taxes and royalty all complete as per building specification and direction of E/I.
39.36
-
124.6
... More
Providing 6 mm cement plaster (1:4 ) in ceiling with clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water,scaffolding,taxes and royalty all complete as per building specification and direction of E/I.
10.89
-
136.62
... More
Providing 12 mm cement plaster (1:3) with clean coarse sand of F.M 1.5 with floating coat of neat cement in skirting including rounding of junctions with floor,curing,taxes and royalty all complete as per building specification and direction of E/I.
5.97
-
186.45
... More
Providing 19 mm water proof cement plaster (1:3) with clean coarse sand of F.M 1.5 with 5% cico or any other approved water proofing compound including cost of screening, curing with all leads and lifts of water,scaffolding,taxes and royalty all complete as per building specification and direction of E/I.
22.05
-
186.45
... More
Providing 1.5 mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I.
22.05
-
43.15
... More
Providing two coats of snowcem of approved shade and make over old surface including washing, cleaning, sand papering the wall,scaffolding,curing and taxes all complete as per building specification & direction of E/I.
120.72
-
85.55
... More
Extra for each coat of cement wash, distemper paint or snowcem over exterior surface for each consecutive floor above first floor including scaffolding etc all complete as per building specification & direction of E/I.
66
-
14.68
... More
Providing two coats of synthetic enamel paint of approved shade and make over steel surface throughly,scaffolding and taxes all papering including cost of scaffolding and taxes all complete as per building specification & direction of E/I.
6.48
-
53.71
... More
Providing and fixing G.I. pipe railing having 1.0 M height consisting 50 x 50 x 6 mm thick M. S. angles as verticals at 1.5 M c/c, and additional posts at every corner with 3 rows of 25 mm dia G.I. pipes of medium class variety as horizontal and painting 3 coats of oil paint over 1 coat of anticorrosive paint of approved colour and shade including cost of all labour, transporting bends to curved shape, etc. complete. Section-H-Miscellaneous Works 48 item -1
6.75
-
873
... More
Providing and fixing in position M.S. ladder 0.50 M wide consisting of 75 x 10 mm M.S. flats as stringers and 16 mm dia M.S. bars in double rows as steps placed at 25 cm c/c including cost of material and labour involved, welding, anchoring and applying 3 coat of anti-corrosive paint, etc. complete as directed by Engineer-in-charge. Section-K-ANCILLARY ITEMS FOR RESERVOIRS 225 Item No-5
11.5
-
1362
... More
Carriage of Materials 5%
1
-
13511.99
... More
Part 4: Rising and Distribution Network with House Connection up to 36Nos. Including Platform & Stand Post.
-
-
-
... More
Earth Work in Excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtrs. Including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I.
-
-
-
... More
For Rising Main
-
-
-
... More
50mm HDPE Pipe-6M
-
-
-
... More
65mm HDPE Pipe-6M
-
-
-
... More
Distribution
-
-
-
... More
63mm HDPE Pipe-6M
-
-
-
... More
50mm HDPE Pipe-72M
-
-
-
... More
32mm HDPE Pipe-144M
-
-
-
... More
20mm HEPE Pipe-216M
-
-
-
... More
Total-450M
450
-
109.19
... More
Dismantling plain cement concrete work including stacking serviceable materials in countable stacks within 15M lead and Disposal of unserviceable materials with all leads all complete
5.59
-
688.52
... More
Providing PCC M-200 with nominal mix of (1:1.5:3) with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of FM 2.5 to 3.0 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, sticking, curing taxes and royalty all complete as per specification and direction of E/I.
5.59
-
5358.83
... More
Rising Main
-
-
-
... More
Manufacture, supply and Delivery of following Nominal dia UPVC column pipes including PVC socket(Coupler),
-
-
-
... More
65mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:74.5 to 75.2mm wall Thickness End:9mm to 10.7mm, Barrel 9mm to 10.7mm, Length:3Mtrs. Rising main
15
-
221
... More
50mm dia-Density of pipe 1.38 to 1.43 Gm per Cm3 OD:87.5 to 88.2mm wall thickness End:9.8mm to 11.9MM, Barrel 7.3mm to 9mm, Length, 3Mtrs. Delivery Pipe
15
-
157
... More
Distribution
-
-
-
... More
Providing and supplying High Density Polyethylene pipe (HDPE pipe) of 20mm to 225mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI - 4984/14151/12786/13488, ISO 4427, DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties PE-80, PN-10
-
-
-
... More
63mm HDPE Pipe-
15
-
163.93
... More
50mm HDPE Pipe-
180
-
103.9
... More
32mm HDPE Pipe-
360
-
43.53
... More
20mm HDPE Pipe- MJP 19-20 sec-I-X sl no.-1A-
540
-
23
... More
Providing and fixing Gun Metal Gate valve with C I wheel of approved quality (screwed end) DSR 18.17.5
-
-
-
... More
50mm dia
1
-
1342.07
... More
65mm dia
1
-
1488.1
... More
Providing and supplying High Density Polyethylene (HDPE) fittings of 20mm to 225mm OD and pressure 6.0Kg/cm2 and 10Kg/CM2 suitable for water supply which is available in all standard conforming to ISI-- 4984/14151/12786/13488, ISO 4427, DIN- 8074 materials rates are Ex-factory excluding transportation, taxes and duties PE-80, PN-10
1
-
3683.17
... More
Lowering, Laying and Jointing H.D.P.E./M.D.P.E. Pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labour as directed by engineer in charge as per IS-7634 Part II. MJP 19-20 sec i-IX sl no-2(i)
-
-
-
... More
For Rising
-
-
-
... More
50mm HDPE Pipe-
15
-
34
... More
65mm HDPE Pipe-
15
-
41
... More
Distribution
-
-
-
... More
65mm HDPE Pipe-
15
-
41
... More
50mm HDPE Pipe-
180
-
34
... More
32mm HDPE Pipe-
360
-
21
... More
20mm Hdpe pipe
540
-
11
... More
Providing 15mm dia. G.I. pipe TATA or equivalent make as per IS 1239(Part 1/2004) ISI Mark/medium quality in Stand Post. DWSD SI. 9K(including CP+OHC)
36
-
119.65
... More
Supplying all materials, labour and tools for fixing 15mm dia G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge
36
-
9.97
... More
Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I.DWSD 3.1.13
-
-
-
... More
(1) Elbow
-
-
-
... More
(a) 15mm dia.
72
-
61.25
... More
(2) Reducer Socket.
-
-
-
... More
(a) 20 x 15mm dia
36
-
65.72
... More
(3) Nipple-
-
-
-
... More
(a) 15mm dia.
72
-
60.16
... More
(4) Plain Socket-
-
-
-
... More
(a) 15mm dia.
72
-
59.07
... More
Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main Including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3mm 6mm 10mm dm ferrule weight not less than 425 gram.
36
-
497.31
... More
Providing and fixing of male ended C.I. Body brass spindle valve and seat Bib cock of approved quality with extra socket all complete as per specification and direction of E/I.
15 dia and weight not less than 400Gm
36
-
165.73
... More
Providing and fixing Gun metal full way valve of approved quality, all complete, as per specification and direction of E/I.
-
-
-
... More
50mm dia and weight not less than 1.5KG
1
-
1342.07
... More
65mm dia full way valve
1
-
1488.1
... More
Construction masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4(1cement:4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix(1 cement:2coarse sand :4graded stone aggregate 20mm nominal size), i/c necessary excavation, foundation concrete 1:5:10(1cement : 5fine sand :10graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3(1 cement :3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5.
Full way valve chamber
2
-
1582.45
... More
Providing brick masonry chamber of inner size 600 x 600 x 450mm deep for bore well protection having 125mm thick wall and 75mm R.C.C. cover including cement plaster of exposed surfce, etc all complete job.
1
-
2148
... More
Supplying materials, labours and equipment's for construction of 0.90m x 0.90m sizeP.C.C. (1:2:4) Rectangular Platform with stand post in house inclduing 12mm thick cement plasrter in C.M. (1:4) with
36
-
1256
... More
Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in -Charge
382.5
-
68.25
... More
Providing fitting & fixing 32mm to 50mm service HDPE saddle all complete job, as per approved design, specification and direction of E/I.
36
-
54
... More
Part-5: Annual Operation & Maintenance cost based on Existing D/T Well with solar motor pump for 5 years.
-
-
-
... More
O & M Cost for 1st Year
1
-
9000
... More
O & M Cost for 2nd Year
1
-
11686.29
... More
O & M Cost for 3rd Year 11686.29 x 1.06
1
-
12387.47
... More
O & M Cost for 4th Year 12387.47 x 1.06
1
-
13130.71
... More
O & M Cost for 5th Year 13130.71 x 1.06
1
-
13918.56
... More
Provision of one no. SIM card & its recharing cost for RMC
5
-
800
... More
Model No. : 4 (Harlalata)
Part-1 :- Construction of 200 mm dia x 165mm dia x 120.00 m deep HYDT Bore well (for 2Nos.)
-
-
-
... More
Cost of drilling 200mmX165mmX125 Mtr deep bore well in all kinds of soil and rock in rural area for installation of pump bore set with Hydraulic DTH Rig machine, all complete including supplying all materials, tools, drilling rig, Air Compressor and equipments, as well as fuel, lubricants and cost of transportation of Rig machine and other vehicles up to the site.
-
-
-
... More
(a) 0.00m Up to 50.00m depth below G.L. In Rural Areas
100
-
826.26
... More
(b) Above 50.00 m depth. In Rural Areas
140
-
947.17
... More
Supplying all tools, tackles & lowering of 200 mm dia MS ERW casing pipe of 6mm wall thickness including welding charges, cost of pipe etc. all complete job.
60
-
1816.65
... More
Supplying all materials, labour, tools & equipments for fitting & fixing 200mm dia MS cap over casing pipe complete job.
2
-
1100
... More
Supplying materials and labours for constructing bore well chamber of 75B designation brick masonry chamber 600mmx450mm and 750mm deep internal dimension having 250mm thickness in cement mortar 1:6 including 12mm cement plaster 1:6 with 600mmx475mm RCC cover with earth work in excavation and 75mm thick PCC(1:3:6) in foundation and refilling all complete as per specification and direction of E/I.
2
-
10581
... More
Part-2 : Provision of 2 Nos. 2 H. P., D. C. Solar Motor Pump Complete Set
-
-
-
... More
Designing, Supplying, Installation, Testing & commissioning with all tools & Parts of following Solar Photovoltaic (SPV) Solar Submersible D.C. Water Motor Pump Suitable for minimum 125mm x 115mm bore well as per MNRE Guideline with following specification & accessories.
-
-
-
... More
SPV arrays contains specified No of same capacity type & specification modules connected to series or paralled to obtained the required voltage & current the power output of individual PV modules should be minimum 200 watt peak.
-
-
-
... More
i) The SPV modules should be as per IEC-61215 and IEC 61730 part:1.0)
-
-
-
... More
ii) All external parts of motor pump used in submersible pump which are in contact of water is stainless steel grade 303 or higher as required.
-
-
-
... More
iii) The PV modules should be mounted on metallic structure of adequate strength and appropriate design which can withstand load of modules & High wind pressure up to 200Km/H
-
-
-
... More
iv) The module mounting structure should be hot dip galvanized according to IS 4759.
-
-
-
... More
v) To enhance the performace of SPV water pumping system & arrangement for seasonal tilt angle Adjustment should be provided
-
-
-
... More
vi) Necessary arrangement should be provided in controlled automatic start-run-stop through out the day with water level detection system. (As per MNRE specifications)
-
-
-
... More
vii) Necessary protection such as lightening arrestor etc. should be provided to protect the controller & SPV
-
-
-
... More
viii) The suction/delivery pipe shall be UPVC/H.D.P.E. pipes of appropriate size 60m or more as required minimum pressure rating of 8kg/sq cm-PE 100 grade for pump up to 3HP & 10 Kg/Sq cm - PE100 grade for 5HP.
-
-
-
... More
ix) All cable used shall be as per IS 694, suitable size of cable shall be used in sufficient length for inter connection between the SPV array to SPV controller and SPV controller to solar power pump. Provision of cable shall be as per IS 14536.
-
-
-
... More
x) The motor pump set should have a 5 Years warranty.
-
-
-
... More
xi) Control panel suitable for motor pump with arrangement of dry run & over flow protection sensor, float switch & rain prevention box. (As per MNRE specifications)
-
-
-
... More
xii) The SPV controller must have IP-65 protection or must be housed in cabinet having at least IP - 65 protection.
-
-
-
... More
xiii) The system should be as per MNRE guide line & Ecofriendly with suitable arrangement to operate new pump manually.
-
-
-
... More
xiv) With third party insepction before dispatch.
-
-
-
... More
xv) Provision for web based remote monitoring of the pumps to be installed must be made through the inbuilt controllers. It should be possible to ascertain the daily water output, the power generated by PV Array the Up and down time of the pump during the year number of days the pump was unused or under breakdown repairs.
-
-
-
... More
The following details should be marked indelibly on the motor pump set
-
-
-
... More
a) Name of the Manufacturer or Distinctive Logo.
-
-
-
... More
b) Model Number.
-
-
-
... More
c) Serial Number
-
-
-
... More
Solar sumbersible motor pump (SPV DC Type)
-
-
-
... More
i) 2 HP (DC Pump) with 1800 WP (minimum) watt as per MNRE. Head Max Shut-Off head 100mtrs.
2
-
170820
... More
Provision of Solar night Lamp.
2
-
1000
... More
Part-3 : 16000 Litre capacity R.C.C. Water Tank (2.7 x 2.7 x 2.6m Internal size) with 12M staging having Utility Room at Ground Level.
-
-
-
... More
Earth work in excavation in foundation trenches in ordinary soil(vide classification of soil item-B) and isposal of excavated earth as obtained to a distance up to 50m including all lifts, levelling, ramming the foundation trenches, removing roots of trees shrubs all complete as per approved design, building specification and direction of E/I.
32.79
-
120.53
... More
Providing P.C.C. M-150 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, mixing cement concrete in mixer and placing in position, vibrating, curing, taxes and royalty all complete as per building specification direction of E/I.
2.33
-
5358.83
... More
Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, 'plywood form work, bully/steel propups, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (excluding M.S. or Tor reinforcement) Section-G-Plain and Reinforced Cement Concrete-item 10 b
6.2
-
5997
... More
Providing and casting in situ Cement Concrete of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, 'plywood formwork, bully/steel prop-ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only.Use of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted) (excluding M.S, or Tor reinforcement) For RCC M-250 grade Column Section-G-Plain and Reinforced Cement Concrete-item 11 b +11 c
-
-
-
... More
Column up to G.L. & G.L. to roof beam of Utility Room
1.9
-
7338
... More
A. Column Utility Room. Roof beam to Tank beam M-25
1.26
-
8071.8
... More
B. Column 2nd bracing to 3rd bracing M-25
1.26
-
8805.6
... More
C. Column 3rd bracing to tank base bracing M-25
0.54
-
8805.6
... More
Providing and casting in situ Cement Concrete of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, 'plywood formwork, bully/steel prop-ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted) (excluding M.S, or Tor reinforcement) For RCC M-250 grade Beams/Braces/Lintels -Section-G-Plain and Reinforced Cement Concrete-item 13 C
-
-
-
... More
Bracing at Utility Room roof level M-25 etc
2.81
-
8599.8
... More
Beam of Tank Floor M-30
0.84
-
9393.6
... More
Providing and casting in situ Cement Concrete of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, 'plywood formwork, bully/steel prop-ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted) (excluding M.S, or Tor reinforcement) For RCC M-300 grade Slabs / Landings / Vertical Walls
-
-
-
... More
Tank Floor roof with projection,landing tank wall M30,
5.96
-
9393.6
... More
Tank roof top M-25, landing
1.46
-
9381.6
... More
Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads including cost of materials,labours,royalityand taxes all complete as per building specification and direction of E/I.
0.66
-
223.35
... More
Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes royalty all complete as per building specification and direction of E/I.
6.75
-
238.38
... More
Filling in foundation trenches and plinth in layers not exceeding 150mm thick, well watered,rammed,fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50M and lift of 1.5M all complete as per building specifications and direction of E/I.(Mode of measurement-compacted volume)
20.16
-
39.82
... More
Providing designation 75 A Brick work in C.M(1:6) in foundation and plinth with approved quality of clean coarse sand of F.M.2 to2.5 including providing 10mm thick mortar joints, cost of screening,scaffolding,raking out joints to 15mm depth,curing,taxes and royalty all complete as per building specification and direction of E/I
1.27
-
3840.03
... More
Providing designation 75A Brick work in C.M(1:6) in superstructure with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10mm thick mortar joints, cost of screening,scaffolding,raking out joints 15mm depth,curing,taxes and royalty all complete as per bldg. specification and direction of E/I
2.12
-
3936.43
... More
Providing R.C.C.M-150 in nominal mix of (1:2:4) in lintel with approved quality of stone chips (20mm to 6mm size) graded and clean coarse of F.M 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating striking, curing(but excluding the cost of reinforcement),taxes and royalty all complete as per building specification and direction of E/I.
0.09
-
6869.9
... More
Providing av.63 mm thick R.C.C M-200 in nominal mix of (1:1.5:3) chhajja with approved quality of stone chips (20mm to 6mm size) graded and clean coarse sand of F.M 2.5 to 3 including in mixer and placing in position,vibrating,striking,6mm cement plaster(1:4) in ceiling and sides of chhajja with sand of F.M 1.5, curing(but excluding the cost of reinforcement) taxes, and royalty all complete as per building specification and direction of E/I.
1.08
-
990.51
... More
Providing T.M.T steel reinforcement of different dia rods as per approved design and drawing including carriage of M.S bars to work site, cutting bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.
1.76
-
65841.44
... More
Supplying, fitting and fixing M.S grill made of 20*6 mmM.S flats as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I.
Window-
36
-
73.74
... More
Providing and fixing fan hooks of 16 mm dia M.S.bar & 1 meter long bent to required size and shape, placed in position and fixed in the R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/I.
1
-
114.31
... More
Supplying, fitting and fixing 20 gauge G.C.I sheet gate fitted on M.S angle frame of size 60*60*6 mm including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in C/C(1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.
2.88
-
3518.16
... More
Providing 12 mm cement plaster (1:4) with clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water,scaffolding,taxes and royalty all complete as per building specification and direction of E/I.
103.92
-
133.47
... More
Providing 12 mm cement plaster (1:6) with clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water,scaffolding,taxes and royalty all complete as per building specification and direction of E/I.
39.36
-
124.6
... More
Providing 6 mm cement plaster (1:4 ) in ceiling with clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water,scaffolding,taxes and royalty all complete as per building specification and direction of E/I.
18.81
-
136.62
... More
Providing 12 mm cement plaster (1:3) with clean coarse sand of F.M 1.5 with floating coat of neat cement in skirting including rounding of junctions with floor,curing,taxes and royalty all complete as per building specification and direction of E/I.
9.12
-
186.45
... More
Providing 19 mm water proof cement plaster (1:3) with clean coarse sand of F.M 1.5 with 5% cico or any other approved water proofing compound including cost of screening, curing with all leads and lifts of water,scaffolding,taxes and royalty all complete as per building specification and direction of E/I.
35.37
-
186.45
... More
Providing 1.5 mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I.
35.37
-
43.15
... More
Providing two coats of snowcem of approved shade and make over old surface including washing, cleaning, sand papering the wall,scaffolding,curing and taxes all complete as per building specification & direction of E/I.
184.66
-
85.55
... More
Extra for each coat of cement wash, distemper paint or snowcem over exterior surface for each consecutive floor above first floor including scaffolding etc all complete as per building specification & direction of E/I.
106.56
-
14.68
... More
Providing two coats of synthetic enamel paint of approved shade and make over steel surface throughly,scaffolding and taxes all papering including cost of scaffolding and taxes all complete as per building specification & direction of E/I.
6.48
-
53.71
... More
Providing and fixing G.I. pipe railing having 1.0 M height consisting 50 x 50 x 6 mm thick M. S. angles as verticals at 1.5 M c/c, and additional posts at every corner with 3 rows of 25 mm dia G.I. pipes of medium class variety as horizontal and painting 3 coats of oil paint over 1 coat of anticorrosive paint of approved colour and shade including cost of all labour, transporting bends to curved shape, etc. complete. Section-H-Miscellaneous Works 48 item -1
9
-
873
... More
Providing and fixing in position M.S. ladder 0.50 M wide consisting of 75 x 10 mm M.S. flats as stringers and 16 mm dia M.S. bars in double rows as steps placed at 25 cm c/c including cost of material and labour involved, welding, anchoring and applying 3 coat of anti-corrosive paint, etc. complete as directed by Engineer-in-charge. Section-K-ANCILLARY ITEMS FOR RESERVOIRS 225 Item No-5
18
-
1362
... More
Carriage of Materials 5%
1
-
21138.95
... More
Part 4: Distribution Network & House Connection above 60 - 80Nos. Including Platform & Stand Post.
-
-
-
... More
Earth Work in Excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtrs. Including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I.
-
-
-
... More
For Rising Main
-
-
-
... More
80mm HDPE Pipe-6M
-
-
-
... More
63mm HDPE Pipe-36M
-
-
-
... More
Distribution
-
-
-
... More
63mm HDPE Pipe-12M
-
-
-
... More
50mm HDPE Pipe-140M
-
-
-
... More
32mm HDPE Pipe-280M
-
-
-
... More
20mm HEPE Pipe-480M
-
-
-
... More
Total-954M
954
-
109.19
... More
Dismantling plain cement concrete work including stacking serviceable materials in countable stacks within 15M lead and Disposal of unserviceable materials with all leads all complete
15
-
688.52
... More
Providing PCC M-200 with nominal mix of (1:1.5:3) with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of FM 2.5 to 3.0 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, sticking, curing taxes and royalty all complete as per specification and direction of E/I.
15
-
5358.83
... More
Rising Main
-
-
-
... More
Manufacture, supply and Delivery of following Nominal dia UPVC column pipes including PVC socket(Coupler),
-
-
-
... More
65mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:74.5 to 75.2mm wall Thickness End:9mm to 10.7mm, Barrel 9mm to 10.7mm, Length:3Mtrs. Rising main
90
-
163.93
... More
80mm dia-Density of pipe 1.38 to 1.43 Gm per Cm3 OD:87.5 to 88.2mm wall thickness End:9.8mm to 11.9MM, Barrel 7.3mm to 9mm, Length, 3Mtrs. Delivery Pipe
15
-
221
... More
Distribution
-
-
-
... More
Providing and supplying High Density Polyethylene pipe (HDPE pipe) of 20mm to 225mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI - 4984/14151/12786/13488, ISO 4427, DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties PE-80, PN-10
-
-
-
... More
63mm HDPE Pipe-
30
-
163.93
... More
50mm HDPE Pipe-
450
-
103.9
... More
32mm HDPE Pipe-
550
-
43.53
... More
20mm HDPE Pipe- MJP 19-20 sec-I-X sl no.-1A-
1200
-
23
... More
Providing and fixing Gun Metal Gate valve with C I wheel of approved quality (screwed end)
-
-
-
... More
80mm dia
1
-
2217.9
... More
65mm dia
2
-
1488.1
... More
Providing and supplying High Density Polyethylene (HDPE) fittings of 20mm to 225mm OD and pressure 6.0Kg/cm2 and 10Kg/CM2 suitable for water supply which is available in all standard conforming to ISI-- 4984/14151/12786/13488, ISO 4427, DIN- 8074 materials rates are Ex-factory excluding transportation, taxes and duties PE-80, PN-10
10% of HDPE & upvc pipe cost
1
-
7561.44
... More
Lowering, Laying and Jointing H.D.P.E./M.D.P.E. Pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labour as directed by engineer in charge as per IS-7634 Part II. MJP 19-20 sec i-IX sl no-2(i)
-
-
-
... More
For Rising
-
-
-
... More
80mm HDPE Pipe-
15
-
44
... More
63mm HDPE Pipe-
90
-
41
... More
Distribution
-
-
-
... More
63mm HDPE Pipe-
30
-
41
... More
50mm HDPE Pipe-
450
-
34
... More
32mm HDPE Pipe-
550
-
21
... More
20mm MDPE pipe
1200
-
11
... More
Providing 15mm dia. G.I. pipe TATA or equivalent make as per IS 1239(Part 1/2004) ISI Mark/medium quality in Stand Post. DWSD SI. 9K(including CP+OHC)
80
-
119.65
... More
Supplying all materials, labour and tools for fixing 15mm dia G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge
80
-
9.97
... More
Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I.DWSD 3.1.13
-
-
-
... More
(1) Elbow
-
-
-
... More
(a) 15mm dia.
160
-
61.25
... More
(2) Reducer Socket.
-
-
-
... More
(a) 20 x 15mm dia
80
-
65.72
... More
(3) Nipple-
-
-
-
... More
(a) 15mm dia.
160
-
60.16
... More
(4) Plain Socket-
-
-
-
... More
(a) 15mm dia.
160
-
59.07
... More
Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main Including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3mm 6mm 10mm dm ferrule weight not less than 425 gram.
80
-
497.31
... More
Providing and fixing of male ended C.I. Body brass spindle valve and seat Bib cock of approved quality with extra socket all complete as per specification and direction of E/I.
15 dia and weight not less than 400Gm
80
-
165.73
... More
Providing and fixing Gun metal full way valve of approved quality, all complete, as per specification and direction of E/I.
-
-
-
... More
32mm dia and weight not less than 700 gms.
2
-
692.54
... More
50mm dia and weight not less than 1.5Kg
2
-
1342.07
... More
65mm dia Full way valve
2
-
1488.1
... More
Construction masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4(1cement:4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix(1 cement:2coarse sand :4graded stone aggregate 20mm nominal size), i/c necessary excavation, foundation concrete 1:5:10(1cement : 5fine sand :10graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3(1 cement :3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation.
Full way valve chamber
6
-
1582.45
... More
Providing brick masonry chamber of inner size 600 x 600 x 450mm deep for bore well protection having 125mm thick wall and 75mm R.C.C. cover including cement plaster of exposed surfce, etc all complete job.
2
-
2148
... More
Supplying materials, labours and equipment's for construction of 0.90m x 0.90m sizeP.C.C. (1:2:4) Rectangular Platform with stand post in house inclduing 12mm thick cement plasrter in C.M. (1:4) with neat cement punning over exposed surface all complete job, as per approved design, specification and direction of E/I.
80
-
1256
... More
Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in -Charge
717.4
-
68.25
... More
Providing fitting & fixing 32mm to 50mm service HDPE saddle all complete job, as per approved design, specification and direction of E/I.
80
-
54
... More
Part-5: Annual Operation & Maintenance cost based on Existing D/T Well with solar motor pump for 5 years.
-
-
-
... More
O & M Cost for 1st Year
1
-
9000
... More
O & M Cost for 2nd Year
1
-
13376.32
... More
O & M Cost for 3rd Year 13376.32 x 1.06
1
-
14178.9
... More
O & M Cost for 4th Year 14178.90 x 1.06
1
-
15029.63
... More
O & M Cost for 5th Year 15029.63 x 1.06
1
-
15931.41
... More
Provision of one no. SIM card & its recharing cost for RMC
5
-
800
... More
Part-6: Provision of Galvanised chain-link mess Fencing around Solar Panel where bore well is away from tower.
-
-
-
... More
Making 30 cm( 12'') dia bore up to 4m below ground with hand auger of approved quality in ordinary soil (vide classification of soil item-A) true to plum and without eccentricity in any stage of operation and disposal of the exacavated eartrh up to 50m lead including all lifts all complete as per approved design and direction of E/I.
12
-
149.49
... More
Providing P.C.C.M-150 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including screening,mixing cement concrete in mixer and placing in position, vibrating, curing,taxes and royalty all compelete as per building specification direction of E/I.
0.85
-
5358.83
... More
Labour cost of fitting and fixing Galvanised chain -link mess up height of 2 M including cost of staples (but excluding the cost of cement concrete angle iron posts,its cutting and making holes,nuts and bolts) all complete as per specification and direction of E/I.
16
-
51
... More
Drilling 6 mm dia holes in M.S Angle iron for fixing of stables etc.as per building specification and direction of E/I.
48
-
6.5
... More
Labour for cutting of M.S Angle iron posts to required length,one end splitted as fish tailed in a length of 150 mm compelete as per building specification and direction of E/I.
8
-
20.31
... More
Supplying,fitting and fixing straining bolts with nut size 22cm*10mm dia tighten the barbed wire with corner post compelete as per building specification and direction of E/I.
48
-
7.63
... More
Supplying,fitting and fixing Galvanised chain -link mess having 3 mm thick wire cell type 40 x 40 mm fitted on M.S. angle frame with two diagonals having 25 x 25 x 5 mm size angle including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in angle post,,applying a priming red lead paint over steel work,taxes excluding the cost of Galvanised chain -link mess all complete.
23.5
-
97.07
... More
Cost of Galvanised chain -link mess having 3 mm thick wire cell type
50
-
74.35
... More
Cost of 50 x 50 x 6 mm M.S. angle
100
-
58.08
... More
Carriage of Materials- 5%
1
-
990.05
... More
Add 12 % GST
1
-
434923.92
... More
Adding Labour Cess @ 1% of Estimated Cost
1
-
40592.9
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements