Drinking Water And Sanitation Department Tender
Search from across the categories, cities, and authorities to find the latest Jharkhand tenders. Every Jharkhand tender is curated from credible sources of government websites (eProcurement Jharkhand portal) and newspapers, thus ensuring the credibility of the information presented to you. For more information on Jharkhand tender bidder registration, the login process and more read the FAQs section on this page.
Costs
EMD
₹ 49,08,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Tender for Chhattarpur Group of Village Rural Water Supply Scheme under Drinking Water and Sanitation Division, Medininagar on turnkey basis for the Year 2018-19.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2018_DWSD_31227_1Bid Award Id
ViewTender No
DWSD/RPWS/Med-11/2018-19Tender Authority
Drinking Water And Sanitation Department ViewPurchaser Address
-Website
http://https://jalshakti-ddws.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Doing Geotechnical survey, Collecting field data, designing aesthetically, getting it approved by competent authority and Providing all labours and equipment for designing & CONSTRUCTION OF ELEVATED SERVICE RESERVOIRS (pl.refer to Sec-5 Sl.no. 2.3 of SBD for technical specification)
-
-
-
5.65 Lakh Litres (21 M stagging)
1
-
6002034
4.75 Lakh Litres (21 M stagging)
1
-
5374237.5
6.75 Lakh Litres (21 M stagging)
1
-
6754962
0.80 lakh Litres (10 M stagging)
1
-
1501219.2
WATER TREATMENT PLANT
-
-
-
Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand Providing all labours and necessary equipment for designing & construction of Conventional WTP of 7.00 MLD capacity. With all complete job. (Please refer to Section 5,Sl. 2.8 of SBD)
1
-
23004000
CONSTRUCTION OF INTEKE WELL WITH PUMP HOUSE (pl.refer to Sec-5 Sl.no. 2.1 of SBD for technical specification)
-
-
-
Earthwork in stropping by hydraulic M/C in grade A& B type of soil including moorum soil, soil mixed with kankar pebbles, boulders up to 300mm size and disposal of the same along with all against materials in countryside beyond 1km up to 2km in all by tipper including construction and maintenance of haul road etc. all complete as per specification and direction of E/I.
31512
-
163
Providing P.C.CM ‐ 30 In nominal mix of (1:0.5:1)in foundation with approved quantity of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M. 2.5to3including screening shuttering, mixing cement concrete in mixer & placing in position, vibrating, striking, curing taxes &royalty all com as per building specification & direction of E/I
18.4
-
5913.66
Providing and casting in situ C.C. of trap / granite/ quartzite /gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by EIC including normal dewatering , plywood formwork , bully or steel props compaction finishing the formed surfaces with CM (1:3) of sufficient thickness for RCC M 30 vertical Walls.
-
-
-
1) Base Slab of Intake Well
245.31
-
5551
2) Wall 1000mm thick
370.52
-
7772
Providing R.C.C. M ‐ 30 with nominal mix of (1:0.5:1) in roof slab with approved quality of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M. 2.5 to3 including screening shuttering and mixing cement concrete in mixer & placing in position, vibrating, striking, curing (but excluding the co reinforcement) taxes & royalty all complete as per building specification &direction of the E/I
14.18
-
8235.61
Providing R.C.C M ‐30 in nominal mix of (1:0.5:1) in Beams all types with approved quantity of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer & placing in position, vibrating, striking, curing taxes &roy all complete as per building specification & direction of E/I
11.47
-
8928.5
Providing R.C.C. M ‐ 30 with nominal mix of (1:0.5:1) in columns with approved quality of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M. 2.5 to 3 including screening, shuttering and mixing cement concrete in mixer & placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes & royalty all complete as per building specification Column of pump house.
4.32
-
7647.86
Providing R.C.C. M ‐ 30 with nominal mix of (1:0.5:1) Operating floor and roof slab with approved quality of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M. 2.5 to 3 including screening, shuttering and mixing cement concrete in mixer & placing in position, vibrating, striking curing (but excluding the cost of reinforcement) taxes & royalty all complete as per building specification& direction the E/I.
8.28
-
8235.84
Providing designation 75 A brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening, materials, scaffolding, raking out joints mm depth curing, taxes & royalty all complete as per building specification & direction the E/I.
24.1
-
4011.07
Providing average 63 mm thick R.C.C. M ‐ 200 with nominal chips 20 mm to 6 mm size graded & clean approved quality of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M. 2.5 to 3 including making drip course in concrete, screening, centering shuttering and mixing cement concrete in mixer & placing in position, vibrating, striking, 6 mm cement plaster (1:4) in ceiling & sides of chajja with sand of F.M. 1.5 curing (but excluding the cost of reinforcement) taxes & royalty al complete as per building specification of E/I.
3.3
-
1022.91
Providing 12 mm cement plaster with mortar (1:3) with clean coarse sand by FM 1.5 including screening, curing with all leads & lifts of water scaffolding, taxes and royalty all complete as per building specification & direction of E/I.
256.38
-
146.42
Providing 6 mm thick cement plaster (1:4) in ceiling with approved quality of coarse sand of F.M. 1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification & direction of E/I.
45
-
133.78
Providing 25 mm thick first class patent stone flooring with stone chips in two layers, bottom layer 19 mm thick (1:2:4) with 12 mm to 6 mm size graded stone chips and top layer 6 mm thick (1:2) with 6 mm down stone chips in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone taxes & royalty with all complete as per building specification & direction of E/I.
38.46
-
271.41
Providing two coats of dry distemper of approved shade and make over a primer coat of washing over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper , applying putty over wherever required, scaffolding, washing of floor sand taxes a complete as per building specification and direction of E/I
303.24
-
71.2
Supplying, fitting & fixing of Rolling Shutter of approved made of required size with M.S. laths interlock together through their entire length and jointed together at ends by end lock mounted on specially designed pipe shaft with brackets side guides and arrangement for inside outside locking with pull and push operating complete.
-
-
-
I) 80x1.25mm M.S. laths with 1.25 mm thick top cover
6
-
2316.1
II) Providing and fixing of ball bearing for Rolling shutter approved quality .
3
-
436.45
Supplying, fitting & fixing M.S./Grill made of20*6 mmM.S. Flat as per approved design & drawing properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per the building specification and direction of E/I. (where materials is not supplied by the Dept.)
240
-
57.69
Providing primer one coast of red lead print of approved make over new steel surface including preparing the surface after cleaning, removing rust, dirt, scales, smokes, grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification & direction of E/I.
40.5
-
41.89
Providing 2 (two) coats of painting with ready mixed paints of approved shade & make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification & direction of E/I.
40.5
-
56.85
Providing and fitting & fixing of handrails as per approved quality weilding etc. to steel ladder rail, balcony railing. Staircase railing including applying 3 coats of anticorrosive paints all complete.
25.76
-
104.7
Supplying , fitting & fixing fully glazed steel window or ventilation of standard rolled Z and steel section.
2.4
-
2984.13
Providing and fixing on position of M.S. Ladder consisting of 75x10mmM.S. flats as stringersand16mmdia M.S. bars in two rows as steps placed at 25cm c/c including cost of materials, labour involved, weilding, anchoring and applying 3 coats of anticorrosive paints all complete.
6
-
1190
Providing for reinforcement as per approved design and drawing excluding carriage of tor rod to work site including cutting bending and binding with annealed write with cost of wore removal of rust placing the dodo in position all complete as per specification and direction of E/I.
64.2
-
53433.91
Manufacturing, providing and supplying spirally welded/ ERW/ SAW/ fabricated M.S. Pipes (Commercial quality) including procurements of Pates, gas cutting to required size rolling, tack welding assembling in suitable lengths to for pipes, welding on automatic welding machine and forming V edge on both side ends of pipes including all taxes (central and local), railway freight, insurance unloading from railway wagon, loading into truck, transport to stores/ site, unloading stacking etc. complete as per IS: 3589 and IS 5504 as applicable specifications (No negative tolerance in thickness is permissible.) supply for radial strainer of 323.90 mm(OD) with Pipe thickness 9.50 mm
156
-
5059
Supplying fitting and fixing steel gauge 16 mm dia12 Nos. in two rows. Each row 6 Nos. as per design and drawing with inside and outside galvanized wire netting and MS. Grill. Inside portion will be filled with washed graded stone metal of 37mm to 20mm to prevent entry of sand along with water.
-
-
-
(i) Grill
24
-
2106.24
(ii) Supply of stone metal at quarry site inclusive of taxes & royalty confirming to M.O.S.T. table 400-7 12 Nos. ports x 1m x 1m x1m thickness of wall.
12
-
857.03
Supplying fitting and fixing Sheet Pile at the location of the intake well all complete up to the end of the work of the intake well and dismantling the same after completion of the work.
4750
-
16842
Carriage of materials
-
-
-
Bricks [15 km lead]
9786
-
0.98
cement [5 km lead]
388.62
-
151.3
steel [ 5 km lead]
64.2
-
151.3
sand [ 10 km lead]
273.52
-
323.86
stone chips [ 5 km lead]
523.03
-
242.07
Doing Geotechnical survey, Collecting field data, designing aesthetically, getting it approved by competent authority and Providing all labours and equipment for designing & CONSTRUCTION OF 3.00 M WIDE AND 30 M LONG APPROACH BRIDGE FROM INTAKE TO WTP (GANGWAY) (pl.refer to Sec-5 Sl.no. 2.2 of SBD for technical specification)
-
-
-
Earthwork in excavation of foundation trenches in ordinary soil (vide classification of soil item A) with disposal of excavated earth so obtained to a distance upto50 M and average lift of 1.5 m including leveling, ramming the foundation trenches, removing roots of trees shrubs etc all complete as per specification and direction of E/I.
189.87
-
102.1
Earthwork in excavation of cut off trenches as per designed section in ordinary rock / soft rock ( vide classification of soil item C) with disposal of soil (beyond 50 m away from the toe of dam in country side) with initial lead of 150 m and lift of 1.5 m including making the section in profile, dressing sides in proper slope and bed in proper grade etc. all complete as per specification and direction of E/I (soft rock where blasting is required and approved by the concerned chief engineer)
36.98
-
396
Filling in foundation and trenches and plinth in layers not exceeding 150 mm thick well watered rammed fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M and lift of 1.5 all complete as per building specification and direction of E/I. (Made of Measurement compacted volume)
160.89
-
37.17
Providing P.C.CM ‐ 150 in nominal mix of (1:2:4) in foundation with approved quantity of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M. 2.5 to 3 including screening shuttering, mixing cement concrete in mixer & placing in position, vibrating, striking, curing taxes &royalty all com as per building specification & direction of E/I.
2.69
-
5913.66
Providing R.C.C M - 200 in nominal mix of (1:1.5:3) in foundation with approved quantity of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer & placing in position, vibrating, striking, curing taxes & royalty complete as per building specification & direction of E/I.
32
-
6543.32
Providing R.C.C. M – 200 with nominal mix of (1:1.5:3) in columns with approved quality of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M. 2.5 to 3 including screening, shuttering and mixing cement concrete in mixer & placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes & royalty all complete as per building specification & direction of the E/I.
41.48
-
7647.84
Providing R.C.C M ‐ 200 in nominal mix of (1:1.5:3) in Beams all types with approved quantity of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer & placing in position, vibrating, striking, curing taxes & royalty complete as per building specification & direction of E/I.
40.5
-
8928.5
Providing R.C.C. M ‐ 200 with nominal mix of (1:1.5:3) in Deck slab with approved quality of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M. 2.5 to 3 including screening shuttering and mixing cement concrete in mixer & placing in position, vibrating, striking, curing (but excluding the cost of reinforcement taxes & royalty all complete as per building specification & direction of the E/I.
51.5
-
8235.61
Providing Tor reinforcement as per approved design and drawing excluding carriage of tor rod to work site including cutting bending and binding with annealed write with cost of wore removal of rust placing the dodo in position all complete as per specification and direction of E/I. @ 1.0%.
13
-
53433.91
Providing and fitting & fixing of handrails as per approved quality wielding etc. to steel ladder rail, balcony railing Staircase railing including applying primer coat of approved steel primer.
406.8
-
104.7
Carriage of materials
-
-
-
cement [ 5 km lead]
97.51
-
151.3
steel [ 5 km lead]
13
-
151.3
sand [ 10 km lead]
66.27
-
323.86
stone chips [ 5 km lead]
132.54
-
242.07
Brick masonary Pump House
-
-
-
Doing Geotechnical survey, Collecting field data, designing aesthetically, getting it approved by competent authority and Providing all labours and equipment for designing & Construction of 10m x 5m x size & 3.6m high brick masonary Pump House.
-
-
-
Earthwork in excavation in foundation trenches in ordinary soil ( vide classification of soil item – A) and disposal of excavated earth as obtained to a distance up to 50m.Including all lifts, leveling, ramming the foundation, trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction and direction of E/I.
165
-
102.1
Providing coarse sand filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150 mm thick with all leads including cost of materials, labour , royalty and taxes all complete as per building specification and direction of E/I
9.9
-
228.47
Providing designation 75A one brick flat soiling joints filled with local sand including cost of watering, taxes , royalty all complete as per building specification and direction of E/I.
66
-
233.78
Providing P.C.C 100 with nominal mix of (1:3:6) in foundation with approved quality of stone metal grade III (50 mm to 25 mm size) clean coarse sand of F.M. 2.5 to 3 including screening mixing cement concrete in mixer and placing in position vibrating curing taxes and royalty all complete as per building specification and direction of E/I
9.9
-
4188.87
Providing R.C.C (M-200) (1:1.5:3) in foundation with approved quality of stone chips (20 mm to 6 mm. size ) graded and clean coarse sand of F.M-2.5 to 3 including screening mixing cement concrete in mixer and placing in position vibrating striking curing ( but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I.
19.8
-
6543.32
Providing R.C.C (M-20) (1:1 1/2:3) in band at Plinth level with approved quality of stone chips (20 mm to 6 mm. size) graded and clean coarse sand of F.M 2.5 to 3 including screening mixing cement concrete in mixer and placing in position vibrating striking curing ( but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I.
2.4
-
8928.5
Providing R.C.C (M-200) (1:1:5:3) in columns with approved quality of stone chips (20 mm to 6 mm. size) graded and clean coarse sand of F.M 2.5 to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I.
5.32
-
7647.84
Providing R.C.C (M-200) (1:1:5:3) in beams of all types with approved quality of stone chips (20 mm to 6 mm. size) graded and clean coarse sand of F.M 2.5 to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I.
2.4
-
8928.5
Providing R.C.C (M-200) (1:1:5:3) in roof slab with approved quality of stone chips (20 mm to 6 mm. size) graded and clean coarse sand of F.M 2.5 to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I.Floor & Roof Slab = 11m x 6m x .15m = 9.9 x 2 =19.8 m3
19.8
-
8235.61
Providing designation 75A Brick work in C.M(1:6) in super structure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening scaffolding raking out joints to 15 mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.
24.65
-
4011.07
Providing R.C.C (M-200) (1:1/2:3) in lintel with approved quality of stone chips (20 mm to 6 mm. size) graded and clean coarse sand of F.M 2.5 to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I.
1.16
-
8065.45
Providing av. 63 mm R.C.C (M-150) (1:2:4) chhajja with approved quality of stone chips (20 mm to 6 mm. size) graded and clean coarse sand of F.M 2.5 to 3 including making drip coarse in concrete, screening, centering, shuttering, mixing cement concrete in mixer and placing in position vibrating striking 6 mm cement plaster(1:4) in ceiling and sides of chhajja with sand of F.M. 1.5, curing ( but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I.
20.88
-
983.24
Providing RCC M 200 with nominal mix (1:1.5:3) in stiffeners with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including, suttering, mixing cement concrete mixer and placing in position, vibrating, striking, curing(but excluding the cost of reinforcement taxes and royalty all complete as per building specification and direction of E/I)
27.62
-
7871.1
Providing Tor steel reinforcement of 10 mm rods as per approved design & drawing including carriage of M.S. rods ( Straight or in coils) to work site. Cutting bending and binding with annealed wire with cost of wire,removal of rust, placing the rods in position all complete as per building specification and direction of E/I.
5.32
-
53433.91
Supplying fitting & fixing good quality well dressed and well seasoned sal woods work in chaukhats, in doors, windows, sky lights, fanlights, and central window openings including wedge over clamps all complete including application of two coats of wood preservative of approved quality on the surface, butting walls and lintel all complete as per specification and direction of E/I.
0.15
-
60278.85
Supplying fitting & fixing of 32mm thick good quality well dressed and well seasonedsal wood work in batten shutters ledge and braced in door and windows with oxidized iron fittings such as hinges, sliding door bolts, tower bolts, handles or rings, hooks and eyes, cleats, sand block as per building specification and direction of E/I.
4.5
-
3928.96
Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I.
303.8
-
125.34
Providing two coat of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface including preparing the plastered surface smooth with sand paper, scaffolding, curing and taxes all complete as per building specification and direction of E/I.
303.8
-
81.14
Providing two coats of synthetic enamel paint over a coat of primer of approved shade and make over new wooden surface after cleaning, removing dirt scales, smokes , greases and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.
38.25
-
154.77
Supplying fitting and fixing MS grill made of 20 x 6mm M.S flats as per approved design and drawing properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site hoisting as per building specification and direction of E/I
112.5
-
57.69
Supplying and fixing rolling shutters of approved make, made of required size MS Laths, inter locked together through there entire length and joined together at the end by end locks, mounted on specially designed pipe shaft with brackets side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS 4454-part 1 and M.S top cover of required thickness for rolling shutters.
4
-
1921.4
Providing 25mm thick first class patent stone flooring 1:2:4 with stone chips in two layers, bottom layer 19mm thick (1:2:4) with 12mm to 6mm size graded stone chips and top layer 6mm thick (1:2) with 6mm down stone chips, in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royalty with all complete as per building specification and direction of E/I.
100
-
271.41
Carriage of materials
-
-
-
Steel (5 km lead)
5.32
-
151.3
Cement (5 km lead)
55.22
-
151.3
Sand (10 km lead)
59.35
-
323.86
Stone chips (5 km lead)
70.7
-
242.07
Brick (15 km lead)
12138
-
0.98
CONSTRUCTION OF RAW WATER RAISING MAIN (pl.refer to Sec-5 Sl.no. 3.1 of SBD for technical specification)
-
-
-
Providing and supplying ISI centrifugally cost spun Ductile Iron Pipes of 100 mm and above all dia. meter for water work with socket & spigot ends conforming to ID 8329/2000 in standard working lengths of 4.5, 5.5 & 6.0 m for classification K-7 & K-9 suitable for push on joint (Rubbers gasket D jointing) with cement motor living inside the pipes with outside zinc and bituminous coating rates are ex-factory excluding transportation, taxes and duties, contract for profit &over head change etc based on WPI 131.30 (including cost of one no. gasket for each pipe) Notes :- 1) The above rates are ex-factory which includes VATs & inspection charges but exclusive of excise duty, carriage on WPI 131.30
2) Price variation of DI pipe will be calculated based on prevailing WPI. 3) Cost of pipe including carriage from factory to work site of 450 km. distance.
-
-
-
DI Pipe 350 mm dia K9
650
-
4945
Providing and supplying ISI standard DI specials and fitting with sealing rubber gasket of S.B.R complete with cast iron follower gland and M.S. nut and bolts coated or otherwise protected from rusting and suitable for D.I. pipes including cost of all labours and materials and transportation to stores / site, loading, unloading including all taxes, etc. complete as per I.S. 9523 @ 5%.
1217.52
-
132
Providing Double Flanged Sluice valve confirming to IS 2906/14846 including worn gear arrangements as per test pressure stainless steel, spindle, caps complete.
-
-
-
Sluice Valve PN-1 350 mm dia. With bypass arrangement
1
-
58087
Providing and supplying Air Valves as per IS-14846 and MJP's standard specifications double orifice type combined with isolating sluice valve, mounted in horizontal position and operated by wheel gearing, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face , and drilled, including all taxes(central and local), insurance , third party inspection changes, loading unloading, transportation up to departmental store/site, etc. complete.
-
-
-
a. i) 100 mm dia Air Valve single Ball Flanged/ Screwed Type - PN 1.0
2
-
9561
Earth Work in excavation (As per IS 3114/1965) for laying of different types and size of pipes so as to give one meter average cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per specification and direction of Engineer - in – Charge (b) for classification of soil item - B.
829.23
-
86.22
Supplying labours, tools, tackles, lubricant etc for laying and jointing CIS/S tyton pipes class K-9 trenches supplying rubber gasket ( Rubber Gaskets confirming to ISS 5382-1969) and making gasket join including providing night guard, barrier and red light to save guard against accident, All complete laying of Pipes is to done as per ISS 3114-1985) as per design, specification and Direction of E/I.
-
-
-
350 mm dia. DI K-9
650
-
74.3
Earthwork in back filing the trenches after laying different types and sizes of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge (for classification of Soil item A & B)
663.38
-
53.89
Supplying Labour and tools for fixing CI sluice valve trenches with a pair of CI Tail pair (including making) flanged joints as per IS specification, including flanged joints as per IS specification confirming to IS:782 - 1978 confirming to IS:6557 - 1972 and nuts and bolts confirming to ISS:1364 - 1983. Including drilling holes in flanged if required as per specification and direction of E/I
-
-
-
350 mm dia.
1
-
5330.43
Providing, laying and fixing in proper alignment in position all type of CI air valves as directed by Engineer in Charge including cost of conveyance from store to site of work, cost of all material and giving stisfactory hydraulic testing etc. all complete for all class of valve.
-
-
-
100 mm dia
2
-
400
Supplying all materials, labours, tools and equipment and constructing brick masonry chamber of 1.20M x 0.90M x 1.50M inner size having 25 cm thick 75A brick masonry wall in C.M.(1:6) over 150mm. P.C.C. M-150, laid over one brick flat solling on 100mm. local sand filling, including 12mm, thick cement plaster with punning of inner surface and exposed surface of B/W in C.M.(1:6) and R.C.C. M-150 cover slab 150mm, thick with 20mm to 6mm. graded stone chips, and clean coarse sand of F.M. 2.5 to 3 including providing CI surface box and screening shuttering mixing, placing, striking, curing, taxes and royalty all complete as per approved design, drawing & specification and direction of E/I.
2
-
17837
Supply all materials & construction of Thrust Block of 1.0 m3 RCC M-200 with nominal mix of (1:2:4) in foundation and plinth with 0.0157 MT reinforcement and approved quality of stone all complete with carraigae job as per specification and direction of E/I.
2
-
6986
Supplying Labours Tools and Tackles for Testing of Lead CI or UPVC or HDPE or AC or DI pressure Pipe upto 60 m head of water all complete as per specification direction EI (Water to be supplied free of cost departmentally)
-
-
-
DI Pipe 350 mm dia K9
650
-
9.48
CONSTRUCTION OF CLEAR WATER RAISING MAIN (pl.refer to Sec-5 Sl.no. 3.1 of SBD for technical specification)
-
-
-
Providing and supplying ISI centrifugally cost spun Ductile Iron Pipes of 100 mm and above all dia. meter for water work with socket&spigot ends conforming to ID 8329/2000 in standard working lengths of 4.5, 5.5 & 6.0 m for classification K-7 & K-9 suitable for push on joint (Rubbers gasket D jointing) with cement motor living inside the pipes with outside zinc and bituminous coating rates are ex-factory excluding transportation, taxes and duties, contract for profit &over head change etc based on WPI 131.30 (including cost of one no. gasket for each pipe) Notes :- 1) The above rates are ex-factory which includes VATs & inspection charges but exclusive of excise duty, carriage on WPI 131.30 of oct 2014
2) Price variation of DI pipe will be calculated based on prevailing WPI. 3) Cost of pipe including carriage from factory to work site of 450 km. distance.
-
-
-
DI pipe K-9 250 mm dia.
41294
-
3172.48
DI pipe K-9 200 mm dia.
3125
-
2360.85
DI pipe K-9 100 mm dia.
30
-
1202.36
Providing and supplying ISI standard DI specials & fitting with sealing rubber gasket of S&R complete with CI follower gland etc. all complete
52431.1
-
132
Providing Double Flanged Sluice valve confirming to IS 14846 including worn gear arrangements as per test pressure stainless steel, spindle, caps including all transportation etc. all complete.(without bypass arrangement)
-
-
-
250ø PN-1 - 6
4
-
29913
200ø PN-1 - 6
5
-
19333
100ø PN-1 - 6
1
-
6812
Providing and supplying Air Valves as per IS-14846 and MJP's standard specifications double orifice type combined with isolating sluice valve, mounted in horizontal position and operated by wheel gearing, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including all taxes (Central and local), insurance, third party inspection charges, loading unloading, transportation up to departmental store/site, etc. complete.
-
-
-
100 mm dia Air Valve single Ball Flanged/ Screwed Type - PN 1.0
40
-
9561
Supplying labours tools for fixing CI sluice valve in trenches with pair of CI tail piece including lead caulked joints and flauged joint as per ISS specification including supplying all jointing materials (Pig lead certified to ISS 782-1978, yarn confirming to ISS 1364-1983) including drilling holes in flauges if required as per specification and direction of E/I .
-
-
-
250 mm dia. S.V.
4
-
3444.53
200 mm dia. S.V.
5
-
3076.58
100 mm dia. S.V.
1
-
1496.75
Earth Work in excavation (As per IS 3114/1965) for laying of different types and size of pipes so as to give one meter average cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per specification and direction of Engineer - in - Charge (b) for classification of soil item - B.
20802.13
-
86.22
Earth Work in excavation of foundation trenches as per design section in ordinary soft rock (vide classification of soil item - C) and disposal of excavated materials so obtained (50 m away from the edge of the trenches) with initial lead of 150 m and initial lift of 1.5 m as per specification and direction of E/I in ordinary or soft rock (where blasting is not required)
13868.09
-
338
Supplying labours tools tackles lubricant etc. for laying item and jointing CIS/S tyton pipes (class LA) trenches supplying rubber gasket ( Rubber gasket conforming to ISS – 5382- 1969) and making gasket joints including providing night guard , barrier and red hight to safe guard against accident, all complete (pipe to be supplieddepart free of cost and laying of pipes is to be done as per ISS 3114- 1985 ) as per design specification and direction of E/I
-
-
-
250 mm dia.
41294
-
97.49
200 mm dia.
3125
-
88.45
100 mm dia.
30
-
68.44
Earthwork in back filing the trenches after laying different types and sizes of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge (for classification of Soil item A & B)
27736.17
-
53.89
Lowering laying and fixing in proper alignment in position all types of CI air valves as directed by Engineer-in-Charge including cost of conveyance from store to site of work, cost of all material and giving satisfactory hydraulic testing etc. complete for all class of valve.
-
-
-
100 mm dia
40
-
400
Supplying all materials, labours, tools and equipment and constructing brick masonry chamber of 1.20M x 0.90M x 1.50M inner size having 25 cm thick 75A brick masonry wall in C.M.(1:6) over 150mm. P.C.C. M-150, laid over one brick flat solling on 100mm. local sand filling, including 12mm, thick cement plaster with punning of inner surface and exposed surface of B/W in C.M.(1:6) and R.C.C. M-150 cover slab 150mm, thick with 20mm to 6mm. graded stone chips, and clean coarse sand of F.M. 2.5 to 3 including providing CI surface box and screening shuttering mixing, placing, striking, curing, taxes and royalty all complete as per approved design, drawing & specification and direction of E/I.
50
-
17837
Supply all materials & construction of Thrust Block of 1.0 m3 RCC M-200 with nominal mix of (1:2:4) in foundation and plinth with 0.0157 MT reinforcement and approved quality of stone all complete with carraigae job as per specification and direction of E/I.
20
-
6986
Supplying Labours Tools and Tackles for Testing of Lead CI or UPVC or HDPE or AC or DI pressure Pipe upto 60 m head of water all complete as per specification direction EI (Water to be supplied free of cost departmentally)
-
-
-
250 mm dia.
41294
-
7.13
200 mm dia.
3125
-
5.99
100 mm dia.
30
-
3.1
CONSTRUCTION OF DISTRIBUTION SYSTEM (12 ZONES) (pl.refer to Sec-5 Sl.no. 3.1 of SBD for technical specification)
-
-
-
Earthwork in excavation (As per I.S. 3114/1965 for laying of different types and sizes of pipes so as to give one meter average cover over the socket of Pipe with disposal of excavated earth within initial lead and lift as per specification and direction of Engineer-in-Charge (b) as per classification of soil item – B
84934
-
86.22
Pucca Road (except Black top only taken out material to be used) for cutting road as per requirement. Assuming 30% of total road cutting.
-
-
-
Pucca Road
8153.63
-
398.03
Water Bound Macadam road (taken out material will be used) for cutting road as per requirement 30% of restoration work i.e.20384.07 x 0.30 = 6115.22 m2
6115.22
-
314.19
Dismantling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15 meter lead and disposal of un-serviceable materials with all leads all complete as per direction of E/I. 30% of restoration work i.e.
917.28
-
642.78
Providing PCC M-15 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20 mm -6 mm size graded and clean coarse sand of FM 2.5 to 3.0 including screening shuttering mixing cement concrete in mixer and placing in position vibrating Striking, curing taxes and royalty all complete as per building specification and direction of E/I.
917.28
-
5913.66
Earthwork in back filling the trenches after laying different types and sizes of pipes with earth removed during excavation within initial lead and lift as per specification and design of Engineer-in-Charge (for classification of soil item A & B)
67946.9
-
53.89
DI Pipe: Providing and supplying ISI centrifugally cost spun Ductile Iron Pipes of 100 mm and above all dia. meter for water work with socket & spigot ends conforming to ID 8329/2000 in standard working lengths of 4.5, 5.5 & 6.0 m for classification K-7 & K-9 suitable for push on joint (Rubbers gasket D jointing) with cement motor living inside the pipes with outside zinc and bituminous coating rates are ex-factory excluding transportation, taxes and duties, contract for profit &over head change etc based on WPI 131.30 (including cost of one no. gasket for each pipe) Notes :- 1) The above rates are ex-factory which includes VATs & inspection charges but exclusive of excise duty, carriage on WPI 131.30 of oct 2014
2) Price variation of DI pipe will be calculated based on prevailing WPI. 3) Cost of pipe (as per chart enclosed) including carriage from factory to work site of 450 km. distance.
-
-
-
300 mm dia. DI K-7
393
-
3380.26
200 mm dia. DI K-7
13811
-
2014.52
150 mm dia. DI K-7
16908
-
1571.41
100 mm dia. DI K-7
10616
-
1060.04
Providing and supplying High Density Poly Ethyene Pipe (HDPE Pipe) of 20 mm to 225 mm OD pressure 6Kg/cm2. Suitable for water supply which is available in all standard like ISI-4984, ISO-4427, DIN-8074 and various grades like PE-63, PE-80, PE-100 and newly invited PE-100 materials rates are ex-factory excluding transportation, taxes and duties, contractor’s profit and over head charges not CST @2% against form ‘C’ & 4% without form C would be charged extra. HDPE pipe materials grate PE-80 PN-10 (dia. mm)
-
-
-
63 mm dia.
35601
-
151.32
75 mm dia.
12741
-
221.78
90 mm dia.
6556
-
319.92
Providing and supplying ISI standard D.I. specials & fitting with sealing rubber gasket of S.B.R. complete with cast iron follower gland and M.S. nut & bolts coated or otherwise protected from rusting and suitable for D.I. pipes including cost of all labours and materials and transportation to stores / site, loading, unloading including all taxes, etc. complete as per I.S. 9523
50737.7
-
132
Supply labours, tools, tackles, lubricant etc. for laying and jointing C.I. S/S tyton pipes (Class LA) trenches supplying rubber gasket (Rubber gaskets confirming to I.S.S. -5382 -1969) and making gasket joints including providing night guard, barrier and red light to safe guard against accident, all complete (pipe to be supplied departmentally free of cost and laying of pipes is to be done as per I.S.S. 3114-1985 as per design and direction of E/I
-
-
-
300 mm dia. DI
393
-
64.42
200 mm dia. DI
13811
-
60.36
150 mm dia. DI
16908
-
60.28
100 mm dia. DI
10616
-
54.29
Supplying labours tools tackles lubricant etc for laying item and jointingHDPE pipes in trenchesand making butt welded joint, supplying heating mirror, jack against accident all complete as per specification and direction of E/I
-
-
-
63 mm dia.
35601
-
29.01
75 mm dia.
12741
-
29.01
90 mm dia.
6556
-
29.01
Supplying Double Flange Sluice valve confirming to IS 14846 including worm gear arrangements as per test pressure stainless steel, spindle, caps complete with out bypass.
-
-
-
300 mm dia. S.V.-9 PN - 1
1
-
29526
200 mm dia. S.V.-7 PN - 1
6
-
21018
150 mm dia. S.V.-6 PN - 1
10
-
10509
100 mm dia. S.V.-4 PN - 1
10
-
7006
80 mm dia. S.V.-3 PN - 1
90
-
5254
Providing Double Flange Sluice valve confirming to IS 14846 including worm gear arrangements as per test pressure stainless steel, spindle, caps including all transporation etc. complete (for scouring purpose)
-
-
-
80 mm dia Sluice valves - PN -1 (without byepass)
30
-
5254
Providing, installing and giving satisfactory field testing of flanged ends Bulk water meter of following type and as mentioned below in (a) and (b) with FGI-250 cast iron body, class "B" confirming to IS : 2373 or as per ISO- 4064, marked to read in metric system, along with manufacturer's test and guarantee certificate including cost of all materials and labour with ISI mark or EEC mark.
-
-
-
a) Enclosed type as per IS 2373
100mm dia
40
-
10007
Supply Labour and tools for fixing CI sluice valve trenches with a pair of C.I. Tail pair including making) flanged joints as per I.S. specification including flanged joints as per IS specifications conforming to IS-782-1978 confirming to I.S. 6557 - 1972 and nuts and bolts confirming to I.S.- 1364-1983) including drilling holes in flanged if required as per specification and direction of E/I.
-
-
-
300 mm dia.
1
-
4343.48
200 mm dia.
6
-
3076.58
150 mm dia.
10
-
2410.27
100 mm dia.
10
-
1496.75
80 mm dia.
90
-
1074.68
Supplying all materials, labours, tools and equipment and constructing brick masonry chamber of 1.20M x 0.90M x 1.50M inner size having 25 cm thick 75A brick masonry wall in C.M.(1:6) over 150mm. P.C.C. M-150, laid over one brick flat solling on 100mm. local sand filling, including 12mm, thick cement plaster with punning of inner surface and exposed surface of B/W in C.M.(1:6) and R.C.C. M-150 cover slab 150mm, thick with 20mm to 6mm. graded stone chips, and clean coarse sand of F.M. 2.5 to 3 including providing CI surface box and screening shuttering mixing, placing, striking, curing, taxes and royalty all complete as per approved design, drawing & specification and direction of E/I.
157
-
17837
Supply all materials & construction of Thrust Block of 1.0 m3 RCC M-200 with nominal mix of (1:2:4) in foundation and plinth with 0.0157 MT reinforcement and approved quality of stone all complete with carraigae job as per specification and direction of E/I.
30
-
6986
Supplying Labours Tools and Tackles for Testing of Lead CI or UPVC or HDPE or AC or DI pressure Pipe upto 60 m head of water all complete as per specification direction EI (Water to be supplied free of cost departmentally)
-
-
-
300 mm dia. DI
393
-
8.2
200 mm dia. DI
13811
-
5.99
150 mm dia. DI
16908
-
4.62
100 mm dia. DI
10616
-
3.1
Labour Charge for one cutting of cast iron pipe & specials including supplying ,necessary tools and plants ,chipping or filling the surface finish as per specification and direction of E/I.
-
-
-
300 mm dia. DI
1
-
105.28
200 mm dia. DI
13
-
78.96
150 mm dia. DI
17
-
52.64
100 mm dia. DI
11
-
31.59
CONSTRUCTION OF RAW WATER PUMPING MACHINERIES( pl. refer to Sec-5 sl. No. 2.5 and 2.7 of SBD )
-
-
-
Doing Geotechnical Survey Collecting field data, designing, getting it approved by Competent authority for raw water pumping machinery discharge 288m3 /hour against total head of 30m (with 12 m column length and MKW = 37KW (1W + 1S)
-
-
-
Supplying, Installation and commissioning of vertical turbine water lubricated pump set of KIRLOSKAR/JYOTI/Mathar and Platt/WPIL make having discharge against total head with column assembly, with suitable capacity vertical hollow shaft squirrel cage induction motor of Kirloskar/ MARATHON/ CGL/ ABB make operated on 415 volt = 10%, 3 phase 50Hz, Ac Supply having slip 1460/2900 rpm with non reversible ratchet, (Contractor will again have to check the design of motor, pump and he will to get it approved by the department) (Pump and Motor)
-
-
-
Discharge 288m3/hr, Head = 30m (1W + 1S)
2
-
954006
Erection of pumps
2
-
8528
Erection of Motors
2
-
2032
Station Piping for Pump manifold Specials (300 x 250/2)
1
-
50000
NRV 2 nos. 250mm dia PN 1.0 Make (IVC/Kirloskar)
2
-
40106
BFV 2nos. Actuator operated 250mm dia PN 1.0 (Pump Br) Make – (IVC/Kirloskar)
2
-
20888
BFV 1 no. Actuator operated 300mm dia. PN 1.0 (Common Header) Make – (IVC/Kirloskar)
1
-
30865
Actuator 250mm dia. for Valve Actuator Make – (IVC/Kirloskar)
2
-
91723
Actuator 300mm dia. for Valve Actuator Make – (IVC/Kirloskar)
1
-
99923
Supplying, Installation and commissioning of power control cum Distribution cubical panel board made of 2mm thick MS, sheet of suitable size, dust and vermin proof consisting of following accessories including installation charges
1
-
572250
Incoming Feeder – 250 TPN MCCB, DM-100 thermal release adjustable and braking capacity with rorary operating mechanism handle (front drive) of L&T SIMENS/HAVELLS make-(2) nos.
-
-
-
Copper busbar 4 pole 300amp. Coper strip bus bar suitable for 2 incommer section along with outgoing feeders and bus couplers enclosed in MS sheet etc. all complete job.
-
-
-
250 Amps, TPN MCCB Bus Coupler 415 V 1 no.
-
-
-
160 Amps MCCB for Pump Motor of L&T/Seimens/Havells make-3 nos.
-
-
-
Fully Automatic Star Delta Starters/Soft Starters L&T/Havells/Alstom make-2 nos.
-
-
-
Voltmeter – (0-500) volt, voltmeter with selector switch of IMP/L&T/AE or of equivalent approved make. 2 nos.
-
-
-
Ammeter – (0-300) amps ammeter C.T. operated with selector switch LMP/L&T make. 2 nos.
-
-
-
Indicating lamp LED-L&T/SIEMENS make in Red, Yellow and Green color for incomers and Bus Couplers - set
-
-
-
32 amp MCCB for lighting load and including l spare for maintenance and other purpose of L&T/Havells/Alstom-2 nos.
-
-
-
63 amp. MCCB for lighting load, including spare of L&T/Havells/Alstom-1 no.
-
-
-
Capacitor Bank for (each Bus Section) compensating no load loss of idle transformer of 30 KV AR (5 STAGE) rating-2 sets.
-
-
-
16 amp MCB for Valve actuator 3 nos. including 2 spare.
-
-
-
Panel should be duly painted with two coats super enameled paint of approved colour one coat of red oxide primer and internally wired with suitable size of copper wire etc. all complete.
-
-
-
Cost of earthing of installation as per I.E. Rules including the cost of earth pit and 6 SWG copper wire in bunch of two and G.I. Pipe all complete ti all instrument.
-
-
-
For Pump House
2
-
8050
(i)Cost of supplying single girder hand operated circular/rectangular travelling crane with 6mtr lift complete with chain pulley block ISI marked and travelling trolly both tested for 50% overload including arrangement for longitudinal/ travel/circular travel cross travel with wheel hand chain etc. complete. a) LF-3.1 & 3.1.1 3 MT capacity 5mtr Span.
1
-
147600
(ii)Providing, erecting and fixing square bar of EN 8 as rail for overhead crane on provided track, girder/ Continuous corbel beam, including supporting plate and J Bolts 40 x 40 mm (EN 8)
10
-
984
Cost of 95 mm2 x 3.5 core 1.1 KV Grade aluminium conductor PVC insulator PVC sheeted armored XLPE cable including laying on wall or on floor or in ground as and where required (from L.T PCC panel of WTP Sub-station to intake MCC panel)
1300
-
634
Cost of 35mm2 x 3 core 1.1 KV Grade aluminium conductor PVC insulator PVC sheeted armored XLPE cable including laying on wall or on floor or in ground as and where required (from MCC panel to Starter/Motor)
40
-
285
Cost of 2.5 mm2 X 3.5/4 core 1.1 KV Grader copper conductor PVC insulated PVC sheated 1.1 KV grade copper cable including laying on wall or on floor as and where required (from panel to starter of actuator)
30
-
280
Providing, erecting servo controlled automatic voltage stabilizer suitable for output voltage 415 volt +/- 1%, 3 ph, 50 Hz with copper wound transformer (oil cooled) 75 KVA capacity. The stabilizer shall function satisfactorily even if incoming supply is unbalanced between phases within rang of 10%. The stabilizer should be constructed in cubical box with bidirectional wheels for easy handling, necessary monitors and user’s control on front panel such as indication, alarm, voltmeter and selector switch for measuring input and output voltage. Auto/manual selector switch, Raise/Low push buttons etc. Suitable capacity termination strips and bus bars for incoming and outgoing cable should be provided. All three phases shall be independently monitored and corrected. Following protections and indications shall be incorporated. .Over voltage/ under voltage .Single phasing .Cutoff contractor with electronic output sensing unit (Make of Kirloskar/ABB/BHEL/CGL
2
-
287909
Cost of providing Electrical Wiring out side the pump house for lighting including cost of MB, HPSV / HPM Lamp of 250/400 W Switches etc. all complete.
1
-
20000
Supply Erection, Installation testing and commissioning of Instruments and Gauges viz. pressure/compound Gauge, Mechanical Level indicator and level sensor.
1
-
12601
Supply Erection, Installation testing and commissioning of Lightning conductor including earthing.
1
-
50000
CONSTRUCTION OF ADDITIONAL CW PUMPING MACHINERIES AT WTP( pl. refer to Sec-5 sl. No. 2.6 and 2.7 of SBD )
-
-
-
Supply, installation, testing and Commissioning of Clear Water Pumpsets with the following equipments and details as under
-
-
-
Doing Geotechnical Survey Collecting field data, designing, getting it approved by Competent authority for clear water pumping machinery
-
-
-
Supplying Installation and commissioning of Horizontal split casing centrifugal pump set of KIRLOSKAR/WPIL/Mathar and Platt/Jyoti make capable of discharge against total head and mounted of common base plate coupled with SPDP squirrel cage suitable capacity induction motor of CGL/Kirlaskar/ABB/Marathon make operated on 415 volt/240 volt 3/split phase = 10%, 3 phase 50 Hz. A.C. supply having speed 1450/2980 rpm including cost of supplying fitting and fixing of all required accessories such as D.I. D/F special sluice valve, N.R. valve, foot valve ISI maked and D.I. D/F pipe of suitable size and length as required for suction and delivery main etc. all complete including cost of supplying, erecting and commissioning as per approved design & drawing.
-
-
-
CW Booster Pump/High Lift Pump :
-
-
-
(i) Discharge - 187 m3/hr, Head = 196m (I W + I S)
2
-
1640335
(ii) Discharge – 87 m3/hr, Head = 44m (1W+IS)
2
-
458917
Erection of CW Booster Pumps
2
-
8142
Erection of CW High Lift Pumps
2
-
3573
Erection of 180 KW Motor for Booster Pump
2
-
7747
Erection of 22 KW Motor for High Lift Pump
2
-
1935
Supplying Installation and commissioning of 1.5 KW/2HP mono block centrifugal Pump (for dewatering purpose)
2
-
13679
(a) Station Piping for Pump manifold Specials (250 x 200/2)
1
-
30000
(b) Station Piping for Pump manifold Specials (200 x 150/2)
1
-
20000
(c) Station Piping for Pump manifold Specials (50 x 50/2)
1
-
7500
(d) NRV 2 nos. 200 mm dia. PN 1.6 (Make IVC/Kirloskar)
2
-
25561
(d1) NRV 2 nos. 150 mm dia. PN 1.6 (Make IVC/Kirloskar)
2
-
13530
(e) BFV 2 nos. Actuator Operated 200 mm dia. PN 1.6 (Pump Br) (Make IVC/Kirloskar)
2
-
18609
(e1) BFV 2 nos. Actuator Operated 150 mm dia. PN 1.6 (Pump Br) (Make IVC/Kirloskar)
2
-
22369
(e2) BFV 1 nos. Actuator Operated 250 mm dia. PN 1.6 (Manifold) (Make IVC/Kirloskar)
1
-
26428
(e3) BFV 1 nos. Actuator Operated 200 mm dia. PN 1.6 (Manifold) (Make IVC/Kirloskar)
1
-
18609
(f) Actuators 200 mm dia. For Valve Actuator Make – IVC / Kirloskar.
2
-
86223
(f1) Actuators 150 mm dia. For Valve Actuator Make – IVC / Kirloskar.
2
-
82923
(f2) Actuators 250 mm dia. For Valve Actuator Make – IVC / Kirloskar.
1
-
91723
(f3) Actuators 200 mm dia. For Valve Actuator Make – IVC / Kirloskar.
1
-
86223
(g) Sluice Valve 50 mm dia. PN 1.0 (Dewatering pump Branch) Make – IVC / kirloskar.
2
-
4066
(h) Isolation Sluice Valve 250 mm dia. PN 1.0 (dewatering pump Branch )
2
-
38621
(h1) Isolation Sluice Valve 200 mm dia. PN 1.0 (dewatering pump Branch )
2
-
25392
(i) Providing and erecting C.I. Foot valve having single leather flap and gun metal seating valve shall be fixed on suction side of pump as per requirement including jointing material and hardware.
2
-
1494
Supplying Installation and commissioning of LT power control centre panel board made of suitable consisting of following accessories including installation charges.
1
-
1491000
(a) Incoming feeder – 1250 amp. 4p ACB, Microprocessor Base (MDO) breaking capacity with rotary operating mechanism handle (front drive) of L&T SIEMENS / HAVELLS Make 2 NOS.
-
-
-
(b) Copper Bus bar 4 pole 1500 amp. Copper strip bus bar suitable for 2 incomer section along with outgoing feeders and bus couplers enclosed in MS sheets etc. all complete job.
-
-
-
(c) ACB Bus Coupler 415 V 4 pole 1250 Amps 1 no.
-
-
-
(d) Voltmeter – (0-500) volt voltmeter with selector switch of IMP / L&T /AE or equivalent approved make. 2 nos.
-
-
-
(e) Ammeter – (0-1200) Amps Ammeter C.T. operated with selector switch of IMP / L&T /AE make. 2 nos.
-
-
-
(f) 800 Amps ACB Microprocessor Base (MDO) breaking capacity Sub Distribution feeder for CW pump House feeder and I spare of L&T /Siemens/ Havells make – 3 nos.
-
-
-
(g) 250 Amps MCCB feeder including I spare for Raw water Intake station of L&T/ Siemens/Havells make – 3 nos.
-
-
-
(h) 160 Amps MCCB Sub Distribution feeder for Chemical House and 1 spare of L&T / Siemens / Havells make- 1 nos.
-
-
-
(i) 100 Amps MCCB Sub Distribution feeder for Filter House of L&T / Siemens / Havells make- 1 nos.
-
-
-
(j) 63 Amps MCCB as feeder for Miscellaneous equipment feeder, feeder for maintenance and 1 spare of L&T / Siemens / Havells make- 2 nos.
-
-
-
(k) 32 Amps MCCB for lighting including I spare of L&T / Havells / Siemens – 2 nos.
-
-
-
(l) Indicating lamp LED-L&T /SEIMENS make in Red, Yellow and Green color for incomers and Bus Couplers 1 set
-
-
-
(m) Panel should be duly painted with two coats super enameled paint of approved colour one coat of red oxide primer and internally wired with suitable size of copper wire etc. all complete.
-
-
-
Supplying Installation and commissioning of Motor control centre panel board made of 2 mm thick MS, sheet of suitable size, dust and vermin proof consisting of following accessories including installation charges
1
-
1674750
(a) Incoming feeder – 800 Amps ACB Microprocessor Base (MDO) breaking capacity Sub Distribution feeder for CW pump House feeder and 1 spare of L&T /Siemens/ Havells make – 3 Nos
-
-
-
(b) Copper Bus bar 1000 amp. Copper strip bus suitable for 2 incomer section along with outgoing feeders and bus couplers enclosed in MS sheets etc. all complete job.
-
-
-
(c) ACB Microprocessor Base (MDO) Bus Couple 415 V 4 pole 800 Amps 1 no.
-
-
-
(d) 630 Amps MCCB for CW Booster pump Motor of L&T /Siemens /Havells make – 3 nos. (including 1 spare)
-
-
-
(e) Fully Automatic Star Delta Starters L&T /Havells / Alstom. Make – 2 nos.
-
-
-
(f) 100 Amps MCCB for CW High Lift Pump Motor and capacitor Bank of L&T/Siemens/Havells make – 3 nos. (including 1 spare)
-
-
-
(g) DOL Starter suitable for 7.5 KW motor of L&T/Havells/Alstom make - 2 nos.
-
-
-
(h) Voltmeter – (0-500) volt, voltmeter with selector switch of IMP/L&T/AE or of equivalent approved make. 2 nos.
-
-
-
(i) Ammeter - (0-800) amps ammeter C.T. operated with selector switch LMP/L&T/AE make. 2 nos.
-
-
-
(j) Indicating lamp LED-L&T /SIEMENS make in Red, Yellow aand Green color for incomers and Bus Couplers 1 set.
-
-
-
(k) 32 amp MCCB for lighting load and miscellaneous purpose of L&T/Havells/ Alstom – 2 nos.
-
-
-
(l) 63 amp MCCB for maintenance purpose of L&T/Havells/Alstom -3 nos.
-
-
-
(m) Capacitor Bank for APFC panel with all Protection unit.(each Bus Section) of 160 KVAR (8 Stage) rating – 2sets.
-
-
-
(n) 16 amp MCB for Valve actuators and dewatering pump motors including 2 spare- 8 nos.
-
-
-
(o) Panel should be duly painted with two coats super enameled paint of approved colour one coat of red oxide primer and internally wired with suitable size of copper wire etc. all complete.
-
-
-
Supplying, erecting, commissioning FCMA Soft Starters of 3 wire system to operate on 380/440 V, 3 phase, 50Hz, consisting of Main contactor AC-3 Duty and 1.5 time of full load current rating, suitable Thyristors, Ammeter with selector switch and CTs, Motor protection against single phasing (current sensing), under voltage and over voltage, phase reversal and Over Current relay having IDMT characteristic – 2 nos. for 180 KW Motor.(Make L&T/Jyoti/ Siemens/schiveder
2
-
385676
(a) Cost of supplying and erecting 185 mm3 X 3 core 11 KV Grade aluminum conductor XLPE/ PVC , armored cable including laying in ground or trench as and where required (from H.T . O.H Line to VCB and HT side of transformer)
100
-
2525
(b) Cost of 1.1 KV Grade aluminum conductor PVC insulator PVC sheeted armored XLPE cable including laying on wall or on floor or in ground as and where required (from L.T side of transformer to PCC/MCC panel)
-
-
-
3.5 C X 400 mm2 (Transformer to PC panel) – 4 Run X 2.
120
-
2279
3.5 C X 300 mm2 (PCC to MCC ) 2 Run X 2.
200
-
1786
3. C X 300 mm2 (CW Booster Pump Motor) 2 Run X 2.
60
-
1676
3. C X 25 mm2 (High Lift Pump Motor) 2 Run X 2.
60
-
244
3.5/4 C X 2.5 mm2 ( Dewatering Pump & Actuator) (6 X 10m = 60m)
60
-
280
Supplying erecting 10 C X 2.5 mm2 copper conductor PVC insulated, armored control cable.
100
-
481
Supplying & erection 10 C X 1.5 copper conductor PVC insulated, armored control cable.
100
-
354
(a) Providing and erecting 12 KV, 630 A 25 KA vacuum circuit Breaker Indoor type without CT, PT & protection Relay 3 panel (1-1.C. & 2-0.G)
3
-
427304
(a) Additional Items for C.T & P.T & Protection Relays as Required.
-
-
-
(b) Providing & erecting Resin Cast Indoor single Phase. 2- core C.T of required ratio & VA burden for metering & protection purpose. CT for 11KV, 15VA, class-1/10p-10
9
-
14846
(c) Providing and erecting Indoor type single Phase, P.T of 100 KV capacity (11KV /Root 3/110V/Root 3)
3
-
14846
(d) Providing & installing in panel triple pole non directional IDMT, 2 O/c and IE/F relay – CD G – 31 without high set ( for transformer feeder)
2
-
21325
(e) Providing & installing in Panel single element high speed Trip relay with mechanical flag & hand reset contacts TYPE VAJH – 13 (for incomer)
1
-
4134
(f) ) Providing & installing in Panel voltage operated auxiliary Relay with flag 2 No + 2 NC, self reset contacts type MVAA 11 (for transformer feeder)
2
-
3198
(g) Providing installing static P.F. controller Relay with min 8 capacitor stages with micro processor based capacitor switching with display of P.F .L.T make.
2
-
16067
(h) Providing installing Automatic Semaphore indicator DC/AC operated for automatic indication of the n position of circuit breakers.
3
-
3427
(a) Supplying and erecting 110v -80 AH, Maintenance free Battery of Exide make. (b) Supplying and erecting Battery charger and DCDB Suitable for 110V -80 AH, Maintenance free Battery of Exide make.
1
-
300000
Cost of earthing of installation as per I.E.Rules including the earth pit and 6 SWG copper wire in bunch of two and pipe all complete in all equipments. For Transformer 1 & 2 - 8
8
-
5000
For Substation H.T panel – 2 nos. For Substation L.T. Panel – 2 nos.
4
-
8050
For Pump House – 2 nos.
2
-
8050
Cost of providing Electric wiring inside & outside the pump house for lighting including cost of MB, HPSV/HPM Lamp of 250/400 W switches etc. all complete as per the requirement and as per the direction of E/I.
1
-
50000
Supplying Erection, Installation testing and commissioning of Instruments and Gauges viz. pressure/Compound Gauge, Mechanical level indicator.
1
-
12601
(i) Cost of supplying single girder hand operated circular/ rectangular travelling crane with 6mtr lift complete with chain pully block ISI marked and travelling trolly both tested for 50% overload including arrangement for longitudinal/ travel/ circular travel cross travel with wheel hand chain etc. complete. a) LF -3.2 & 3.2.3, 5.00 MT capacity 6 to 8mtr Span.
1
-
234580
ii) Providing, erecting and fixing square bar of EN 8 as rail for overhead crane on provided track, girder/continuous corbel beam, including supporting plate and J Bolts 40 x 40 mm (EN 8)
30
-
984
Supplying Erecting, approved make thyrite type Lightning arrester suitable for HT 11 KV supply with necessary ancillary materials complete on provided cross arm and connected to overhead line.
1
-
3310
Manufacture supply and commission of full bore Electromagnetic flow meter of Krone Marshal/Enders Houser/ABB make for clear water with accuracy 0.5% of measured value and protections as per specification for size 100 mm to 1000 mm including sensors, transmitter, surge arrester, cable GI duct of suitable size for 25 meter sensor, transmitter, surge arrester, 25 meter/each flow meter including pipe cutting leveling and installation of flow meter in the pipe lines with necessary tool tackles, cranes etc. as may be required at site and best on technical specification as per annexure A (Mandatory accessories)
-
-
-
(a) 100 mm nominal Bore Flow Meter (for ESR-1)
1
-
156284
(b) 150 mm nominal Bore Flow Meter (for CW rising main from WTP to USR)
1
-
168091
Providing, installing and giving satisfactory testing and trial run of Krone Marshal/Enders House/ABB make Ultrasonic Clamp on Fixed type Flow Meter (single channel) working on conditions and specifications, calibration, inspection, testing, training, guarantees supported with manufacturers test certificate/declaration aling with all accessories as necessary.
1
-
501500
Mechanical & Electrical Part at High Lift Pump Station of Intermediate UGR. ( pl. refer to Sec-5 sl. No. 2.6 and 2.7 of SBD )
-
-
-
Doing Geotechnical Survey Collecting field data, designing, getting it approved by Competent authority. For clear water pumping Machinery.
-
-
-
Supplying Installation and commissioning of Horizontal split casing centrifugal pump set of KIRLOSKAR / WPIL/Mathar and Platt/Jyoti make capable of discharge against total head and mounted of common base plate coupled with SPDP squirrel cage suitable capacity induction motor of KEC / SIEMENS / CGL /ABB/Marathon/Kirloskar make operated on 415 volt/ 240 volt 3 / split phase = 10%, 3 phase 50 Hz. A.C. supply having speed 1450 rpm including cost of supplying fitting and fixing of all required accessories such as D.I. D/F special sluice valve, N.R. valve, foot valve ISI maked and D.I. D/F pipe of suitable size and length as required for suction and delivery main etc. all complete including cost of supplying, erecting and commissioning as per approved design & drawing
-
-
-
High Lift Pump for ESR III & IV of Zone 3 :
-
-
-
(a) Discharge - 115 m3/hr, Head = 135 M and MKW = 75 KW (1W+1S)
2
-
1016981
High Lift Pump for ESR II :
-
-
-
(b) Discharge - 72.5 m3/hr, Head = 48 M and MKW = 18.50 KW (1W+1S)
2
-
449031
Erection of High Lift Pumps for ESR III & IV of Zone 3
2
-
5097
Erection of High Lift Pumps for ESR II
2
-
3573
Erection of High Lift Pump Motors for ESR III & IV of Zone 3
2
-
3875
Erection of High Lift Pump Motors for ESR III & IV of Zone 3
2
-
1935
(c) Supplying Installation and commissioning of 1.5 KW / 2HP mono block centrifugal Pump (for dewatering purpose)
2
-
13679
(d) Station Piping for Pump manifold Specials (200 X 150/2)
1
-
20000
(e) Station Piping for Pump manifold Specials (150 X 100/2)
1
-
15000
(f) Station Piping for Pump manifold Specials (50 X 50/2)
1
-
7500
(g) NRV 2 nos. 150 mm dia. PN 1.6 (Make IVC/Kirloskar)
2
-
13530
(g1) NRV 2 nos. 100 mm dia. PN 1.0 (Make IVC/Kirloskar)
2
-
8090
(h) BFV 2 nos. Actuator Operated 150 mm dia. PN 1.6 (Pump Br) (Make IVC/Kirloskar)
2
-
14610
(h1) BFV 2 nos. Actuator Operated 100 mm dia. PN 1.6 (Pump Br) (Make IVC/Kirloskar)
2
-
9786
(h2) BFV 1 no. Actuator Operated 200 mm dia. PN 1.6 (Common Header) (Make IVC/Kirloskar)
1
-
18609
(i) Actuators 150 mm dia. For Valve Actuator (Common Header) (Make IVC/Kirloskar)
1
-
82923
(j) Sluice Valve 50 mm dia. PN 1.0 (Dewatering Pump Branch) (Make IVC/Kirloskar)
2
-
4066
(k) Providing and erecting C.I. Foot valve (50 mm) having single leather flap and gun metal seating valve shall be fixed on suction side of pump as per requirement including jointing material and hardware.
2
-
1494
(l)Isolation Sluice Valve 200 mm dia. PN 1.0 Suction Branch of High Lift Pump for ESR III
2
-
25392
(l1)Isolation Sluice Valve 150 mm dia. PN 1.0 Suction Branch of High Lift Pump for ESR II
2
-
13969
Supplying Installation and commissioning of Power cum Motor control centre panel board, made of suitable size, dust and vermin proof consisting of following accessories including installation charges
1
-
976500
(a) Incoming feeder - 630 amp. 4P, MCCB, DM - 100 thermal release range, adjustable and breaking capacity with rotary operating mechanism handle (front drive) of L&T SIEMENS /HAVELLS make 2 nos.
-
-
-
(b) Copper Bus bar 4 pole 750 amp. Copper strip bus bar suitable for 2 incommer section along with outgoing feeders and bus couplers enclosed in MS sheets etc. all complete job
-
-
-
(c) MCCB Bus Coupler 415 V 4p 630 Amps 1 no.
-
-
-
(d) Voltmeter - (0-500) volt voltmeter with selector switch of IMP / L&T / AE or of equivalent approved make - 2 nos.
-
-
-
(e) Ammeter - (0-800) Amps Ammeter C.T. operated with selector switch LMP / L&T make - 2 nos.
-
-
-
(f) 250 Amps MCCB feeder for CW Pump and 1 spare of L&T/Seimens/Havells make - 3 nos.
-
-
-
(g) 100 Amps MCCB feeder for CW Pump and 1 spare of L&T/Seimens/Havells make - 3 nos.
-
-
-
(h) 63 Amps MCCB as feeder for Capacitor bank, Maintenance feeder and 1 spare of L&T/Seimens/Havells make - 4 nos.
-
-
-
(i) 32 amp MCCB for lighting including 1 spare of L&T/Havells/Alstom - 2 nos.
-
-
-
(j) 16 amp MCB for Valve actuators and dewatering pump motors including 2 spare - 8 nos.
-
-
-
(k) Fully Automatic Star Delta Starters L&T/Havells/Alstom make - 2 nos.
-
-
-
(l) Indicating lamp LED-L&T/SIEMENS make in Red, Yellow and Green color for incommers and Bus Couplers - 1 set
-
-
-
(m) Panel should be duly painted with two coats super enameled paint of approved colour one coat of red oxide primer and internally wired with suitable size of copper wire etc. all complete.
-
-
-
Supplying, erecting, commissioning FCMA Soft Starters of 3 wire system to operate on 380/440 V, 3-phase, 50 Hz. consisting of Main contactor AC-3 Duty and 1.5 times of full load current rating, suitable Thyristors, Ammetor with selector switch and CTs, Motor protection relay with protection CTs for protection against single phasing (current sensing), under voltage and over voltage, Phase reversal and Over Current relay having IDMT characteristic -2 nos. for 75 Kw Motor. (Make : -L&T/ Jyoti/ Siemens/ schineder)
2
-
216939
a) Cost of supplying and erecting 185 mm2 x 3 core 11 KV Grade aluminium conductor, XLPE / PVC, armored cable including laying in ground or trench as and where required (from H.T. O.H. Line to VCB and HT side of transformer)
100
-
2525
b) Cost of 1.1 KV Grade aluminium conductor PVC insulator PVC sheeted armored XLPE cable including laying on wall or on floor or in ground as and where required (from L.T side of tranformer to MCC panel etc)
-
-
-
3.5 C X 185 mm2 (Transformer to PCC / MCC Panel) (2 X 2 X 15m = 60m)
60
-
1157
3 C X 95 mm2 (MCC to Starter / Motor) (2 X 2 X 20m=80m)
80
-
627
3 C X 25mm2 (MCC to High Lift Pump Motor/Starter) (2 X 2 X 15m=60m)
60
-
244
3.5/4 C X 2.5 mm2 (Dewatering Pump & Actuator) (6 X 15m=90m)
90
-
280
Supplying & erecting 10 C X 2.5 mm2 copper conductor PVC insulated, armoured control cable
100
-
481
Supplying & erecting 10 C X 1.5 mm2 copper conductor PVC insulated, armoured control cable
100
-
354
a) Providing and erecting 12 KV, 630A, 25KA vacuum circuit Breaker Indoor type without CT, PT & Protection Relay 3 Panel (1-I.C. & 2-0.G.)
3
-
427304
Additional Items for C.T., P.T. & Protection Relays as required
-
-
-
b) Providing & erecting Resin Cast, Indoor single Phase, 2-core C.T. of required ratio & VA burden for metering & protection purpose CT for 11KV, 15VA,class-1/10P-10
9
-
14846
c) Providing & erecting Indoor type single Phase, P.T. of 100VA capacity (11KV/Root 3/110V/Root 3)
3
-
14846
d) Providing & installing in Panel tripple pole non-directional IDMT, 2 O/c and 1E/F relay - CD G-31 without high set (for transformer feeder)
2
-
21325
e) Providing & installing in Panel single element high speed Trip relay with mechanical Flag & hand reset contacts type VAJH-13 (for incomer)
1
-
4134
f) Providing & installing in Panel voltage operated auxillary Relay with flag 2 No + 2 NC, self reset contacts type MVAA 11 (for transformer feeder)
2
-
3198
g) Providing installing static P.F. controler Relay with min 8 capcitor stages with micro Processor based capacitor switching with display of P.F.-L&T make
2
-
16067
h) Providing installing Automatic Semaphore indicator Dc/Ac operated for automatic indication of the position of circuit breakers
3
-
3427
(a) Supplying and erecting 110V-80 AH, Maintenance free Batteryof Exide make (b) Supplying and erecting Battery charger suitable for 110V-80 AH, Maintenance free Battery of Exide make (c) Supplying and erecting Battery charger and DCDB suitable for 110V-80 AH, Maintenance free Battery of Exide make
1
-
300000
Cost of earthing of installation as per I.E. Rules including the earth pit and 6 SWG copper wire in bunch of two and pipe all complete in all equipments.
-
-
-
(a) For Transformer 1 & 2 - 8 nos.
8
-
5000
(b) For Substation H.T. Panel - 2 nos.
2
-
8050
(c) For Pump House L.T. Panel - 2 nos.
2
-
8050
Cost of providing Electric wiring inside & outside the pump house for lighting including cost of MB, HPSV / HPM Lamp of 250/400 W switches etc. all complete as per the requirement and as per the direction of E/I.
1
-
50000
Supply Erection, Installation testing and commissioning of Instruments and Gauges viz. pressure/ Compound Gauge, Mechanical level indicator and level sensor, Flow meter Ultrasonic and Electromegnatic Flow meter at WTP and OHR Outlet & Flow Totaliser
1
-
12601
(i) Cost of triple spur gear chain pulley block of 5 tonne lifting capacity with 5 meter lift complete with load chain and hand chain tested to 50% of over load as per 1.8. 3832 carrying ISI mark including over head joint with travelling
1
-
234580
(ii) Providing, erecting and fixing square bar of EN 8 as rail for over head crane on provided track, girder /continuous corbel beam, including supporting plate and J Bolts 40x 40 mm (EN 8)
30
-
984
Supply Erection, approved make thyrite type Lightning arester suitable for HT 11 KV supply with necessary ancillary materials complete on provided cross arm and connected to overhead line.
1
-
3310
Manufacture supply and commission of full bore Electromagnetic flow meter of Krone Marshal/Endress Houser/ABB make-for clear water with accuracy 0.5% of measured value and protections as per specification for size 100mm to 1000mm including sencors, transmitter, surge arrester, cable GI duct of suitable size for 25 meter sensor, transmitter, surge arrester, 25 meter / each flow meter including pipe cutting leveling and installation of flow meter in the pipe lines with necessary tool tackles, cranes etc. as may be required at site and best on technical specification as per annexure A (Mandatory accessories)
-
-
-
100 mm nominal Bore Flow Meter (for ESR-II) (1 no for ESR II and another for ESR III and IV)
2
-
156284
Twin Type Staff Quarter - 1 Unit (Please refer to Section 5,Sl. 2.9 of SBD)
-
-
-
E/W in Excavation in foundation trenches in land soil (Vide classification of soil Item -B) & disposal of excavatd earth obtained to a distance up to 50 M including all lift leveling ramming the foundation trenches removing root of trees scrubs all complete as per building specification & direction Of E/I
51.51
-
102.1
Providing ,coarse clean sand in filling in foudation trenches /in Plinth including ramming & watering in layers not exceeding 150 mm thick with all leads lift including cost of all materilas ,labour , royalty & taxes all complete as per building specification & direction Of E/I
4.29
-
228.47
Providing designation 75 A one brick flat soiling joints filled with local sand including cost of watering taxes royalty all complete as per building specification & direction of E/I
57.23
-
233.78
Providing P.C.C M-100 in nominal mix of (1:3:6) in foundation with appoved quantity of stone metal (50 mm 25 mm dia size)graded & clean coarse sand of F.M 2.5 to 3 including screening , shuttering , mixing cement concrete in mixer & placing in position , vibrating , striking , curing taxes & royalty all complete as per building specification & direction of E/I
8.59
-
4188.87
Providing designation 75 A brick work in C.M. (1:6) in foundation 7 Plinth with approved quality of clean coarse sand of F.M 2 to 2.5 including Providing 10 mm thick mortar joints ,Cost of screening , materials , Scaffolding , raking out joints to 15 mm depth curing , taxes & royalty all complete as per building specification & direction of E/I
37.03
-
3921.08
Providing 25 mm thick damp proof coarse with cement concrete M-150 with nominal mix of (1:2:4) with approved quality of stone chips of 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to3 including screening , shuttering mixing cement concrete in mixer with 5% cico or any other approved water proffing compound and placing in position , vibrating , striing , curing , taxes & royalty all complete as per building specification & direction of E/I
28.53
-
176.74
Providing designation 75 A brick work in C.M (1:6) in super structure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing10 mm thick motar joints ,cost of screening , materials, scaffolding,raking out joints to 15 mm depth curing , taxes & royalty all complete as per building specification & direction of E/I
41.14
-
4011.07
Providing R.C.C M-150 with nominal mix of (1:2:4) in lintel level with approved quality of stone chips 20 mm to 6mm size graded & clean coarse sand of F.M 2.5 to including making drip course in concreteing , screening , concreting shuttering and mixing cement concrete in mixer & placing in position vibrating striking excluding the cost of reinforcement ) taxes & royalty all complete as per building specification of (E/I.
2.89
-
7435.79
Providing average 63 mm thick R.C.C M -150 with nominal mix (1:2:4) chajja in shelves with approved quality of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M 2.5 to 3 including making drip course in concrete , screening , centering shuttering & mixing cement concrete in mixer & placing in position vibrating ,striking ,6 mm cement plaster (1:4) in celling & sides of chajja with sand of F.M 1.5, Curing ( But excluding the cost of reinforcement ) taxes and royalty all complete as per building specification of E/I
19
-
983.24
Providing R.C.C M-150 with nominal mix of (1:2:4) in roof slab with approved quality of stone chips 20 mm to 6 mm size Graded & Clean coarse sand F.M 2.5 to including screening , shuttering ,mixing cement concrete in mixer & placing in position , vibrating ,striking, curing (but excluding the cost of reinforcement) taxes & royalty all complete as per building Specification & direction of the E/I
6.075
-
7605.94
Supplying fitting & fixing good quality ,well dressed & well seasoned sal wood work in choukhat in doors , windows , skylights , fan light and C/W celestial windows openings , including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls & lintels all complete as per building specification & direction of E/I
0.67
-
60278.85
Supplying fitting and fixing 250X20X6 mm L-type M.S Clamp properly fish tailed .including making holes and setting the same in 375 X125X75 mm cement concrete block (1:2:4) with cost of all labour and materials and taxes as per building specification and diection of E/I @6 for each door & 4 for each window Total Quantity -(2X3X6+2X4X4)=68 nos
104
-
68.31
Supplying all materials , labours and fitting & fixing 38 mm (1.5) thick good quality seasoned sal wood battened shutter ledged & braced in door and windows with oxidized iron fitting such as hingles ,sliding door bolts , tower bolts , handles or ings hooks and eye , cleats , sand block as per schedule , taxes & royalty all complete as per building specification & direction of Engineer -in- charge
29.205
-
4311.52
Supplying , fittings & fixing M.S /Gril made of 20X6 mm M.S flat as per approved design & drawing properly fabricated with joints continous filllet welded and finshed smooth , carriage of grill to work site hoisting as per the building specification and direction of E/I ( where materials is not supplied by the Deptt .)
302.4
-
57.69
Providing 25 mm thick pre cast R.C.C M-150 with nominal mix of (1:2:4) in jali with approved quality to stone chips of 6mm nominal size and clean coarse sand of FM 2.5 to 3 with 1.6 mm thick M.S wire as per approved design and drawing and placing the same in position true to plumb and level and properly grouted with cement mortar (1:3) including cost of curing , Scaffolding and finishing all complete as per building specification and direction E/I
0.54
-
238.22
Providing and fixing fan hook of 16 mm dia M.S bar 1 meter long bent to reqired size and shape placed in position and fixing in R.C.C slab/beam at the time of casting all complete as per building specification of E/I where material is not supplied by cheet
4
-
97.3
Supplying , fitting and Fixing M.S Grill gate made of 20X 6 mm M.S or 16 mm M.S raurbar Flat fitted on 25 mm X 25 mm X 6mm M.S angle frame of size 60X60X6 as per approved design including cost of fabrication & drawing , properly fabricated with joints continuous fillet welded & finished smooth, providing necessary locking arrangements with Haskell & dummy duly fixed in C.C (1:2:4) blocks of reuired size applying a priming red lead paints over steel works , taxes , carriage of grill to work site , asper the building specification & direction of E/I ( where materials is not supplied by the Dept)
257.99
-
78.38
Providing 6 mm thick cement plaster (1:4) in celling with approved quality of clean coarse sand of F.M 1.5 including screening , curing with all leads & lifts of water , scaffolding , taxes & royalty all complete as per building specification & direction of E/I
45.56
-
133.78
Providing 12 mm thick cement plaster (1:6) with approved quality of clean coarse sand of F.M 1.5 including screening .Curing with all leads & lifts of water , Scaffolding , taxes 7 royalty all complete as per building specification & direction of E/I.
446.01
-
125.34
Providing cement 1:3 (12mm ) plaster with cement mortar (1:3) using clean coarse sand finishing with neat punning a dado 6" (150 mm) high a side room and out side wall upto plinth level includng screening , curing with all leads & lifts of water , scaffolding , taxes and royalty all complete as per building specification & direction of E/I
50.11
-
191.59
Providing average 115mm. thick lime terracing (24 lime:36 surkhi : 100 brick khoa) well beaten and compacted including maintaining proper level and slope, making ghundi with finishing treatment, cost of carriage, curing, royalty and taxes all complete as per building specification and direction of E/l.
60.73
-
756.24
Earth work in filling in foudation trenches & Plinth in layers not exceeding 150 mm thick well watered ,rammed ,fully compacted & fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 m & lift of 1.5 m all complete as per building specification & direction of E/I
30.6
-
37.17
Providing average 150 mm thick dry rammed khoa beaten to 112 mm (compacted with water) made of well burnt jhama bricks including ramming properly till compacted thickness is achieved, curing and carriage of water with all leads, making proper slope and blending the top with cement mortar (1:10) all complete as per building specification and direction of E/l.
47.72
-
146.99
Providing 25 mm thick . First class patent stone flooring (1:2:4) with stone chips in two layers ,bottom layer 19 mm thick (1:2:4) with 12 mm to 6 mm size graded stone chips and top layer 6 mm thick (1:2) with 6 mm down stone chips in pannels including cost of curing , finishing the surface smooth by rubbing with carborandum stone taxes & royalty with all complete as per building specification & direction of E/I
47.72
-
271.41
Providing designation 75 A one brick on edge flooring in C.M (1:4)with top surface flush approved quality of clean coarse sand of F.M 2 to 2.5 including the cost of screening ,raking out joints to 15 mm depth , curing taxes,royalty all complete as per building specification and direction (E/I)
38.23
-
551.72
White washing three coats over new surface with approved quality of lime including cost of cleaning surface thoroughly and removing the scales of smoke and mosh marks with jhama rubbing, scaffolding, washing, of floors and taxes all complete as per building specification and direction of E/l.
273.17
-
12.03
Colour washing two coat over a coat of white wash over old surface with approved quality of lime in approved shade including cost of cleaning surface thoroughly and removing the scales of smoke and mosh marks with jhama rubbing, scaffolding, washing, of floors and taxes all complete as per building specification and direction of E/l.
227.02
-
17.67
Providing two coats of painting with ready mixed paint over a coat of primer of approved shade and make over new wooden surface including pareparing the surface after cleaning, removing dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specfication and direction of E/l
65.71
-
91.23
Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning , removing rust ,dirt ,scales ,smokes and grease and cleaning the surface thouroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I
23.32
-
41.89
Providing two coats of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l.
23.32
-
56.85
Providing Tor steel reinforcement of 8mm. dia. rods as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. TMT Fe 500 (Only valid for SAIL and TATA)
0.93
-
53433.91
Carriage of materials from divisional store or kiln site or quarry site to work site including contract profit, loading, unloading, transportation, etc. all complete .
-
-
-
Cement 5 KM lead
17.29
-
151.3
Steel 5 KM lead
0.93
-
151.3
Sand 10 KM lead
50.24
-
323.46
Bricks 15 KM lead
35645
-
0.98
Stone/Stone Chips 5 KM lead
17.76
-
242.07
(B) Water Supply and Sanitation Installation (Plumbing Work) -
-
-
-
Supplying and laying GI pipes of approved make in trenches with red lead and yarn with socket and screw joints and cutting pipes in size and threading ends where necessary including carriage of materials up to work site etc. all complete as per specification and direction of E/I.
-
-
-
i) 25mm GI. Pipe.
20
-
297.88
ii) 15 mm GI. Pipe.
35
-
206.81
Supplying materials and labours for fixing GI Pipes with red lead paints and yarn with screwed and sockted joints on wall, celling and floor including supplying of wall hooks of pipe clamp, wooden plugs, cutting pipe to size and threading ends where necessary all complete as per specification and direction of E/I.
-
-
-
i) 15 mm GI. Pipe
30
-
206.81
Supplying, fitting and fixing of GM ferrule of approved make in DI/CI main including drilling and tapping CI/DI main etc. all complete as per specification and direction of E/I.
2
-
416.01
Supplying and fixing GI fittings of approved make all complete as per direction of E/I.
-
-
-
(a) Elbow 15 mm dia
20
-
46.39
(b) Tee plane 15mm dia
8
-
52.14
(c) Nipple 15mm dia.
20
-
45.24
(d) Union Socket 25mm dia
2
-
130.74
(e) Union Socket 15mm dia
4
-
77.44
(f) Brass bib cock 15mm dia
8
-
152.19
(g) C.I stop cock 15mm dia
8
-
136.09
(h) C.I. stop cock 25mm dia
2
-
346.94
(i) Reducing Socket 25x15mm
4
-
64.26
(j) Tee 25x25x15mm dia
5
-
98.27
Supplying, fitting and fixing vitreous white glazed earthen were I W C of parry Hindustan or any other I.S.S approved make with 100 mm HCI ‘P’ trap, 15 Liters CI pull and let go flushing cistern of names or other ISS equivalent make complete with all fittings C.I. or C.C brackets, 32 mm, alkathene /PVC telescopic flush pipe about 2 mtrs. long with one brass coupling and clamps, GI chain and pull including supplying and fixing a pair of vitreous white glazed earthen were footrest to be fixed in floor, 15 mm .CI body brass spindle, stopcock of weight not less than 50 grams, 15 mm. PVC connection pipe 450 mm. long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. White vitreous China Orrisa pattern W.C. Pan of 510mm.long with 10.0 Liter low level PVC System.
2
-
3771.02
SEPTIC TANK and SOAK PIT
-
-
-
Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item-B) and disposal of excavated earth as obtained to a distance up to 50 m including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/I.
1
-
102.1
Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of E/I.
2.89
-
228.47
Providing designation 75A one Brick flat soling, joints filled with local sand including cost of watering, tax, royalty all complete as per building specification and direction of E/I.
4.76
-
233.78
Providing P.C.C M150 with nominal mix of (1:2:4) in foundation with approved stone chips 20mm to 6mm size well graded and clean course sand of FM-2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, Vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.
0.14
-
5913.66
Providing water proof cement plaster (1:3) with clean course sand of F.M- 1.5mm with 5% cico or any other approved water proofing compound including taxes and royalty all complete as per building specification and directions of E/I.
-
-
-
(a) 19 mm thick
1.8
-
218.34
(b) 12 mm thick
9.86
-
154.79
Providing designation 75A bricks work in C.M. in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints, cost of screening materials racking out joints to 15 mm. depth, curing taxes and royalty all complete as per building specification and direction of E/I.
-
-
-
(a) B/W in C.M (1:4)
2.78
-
4175
(b) B/W 75-A in (1:6) for Soak pit
0.53
-
3921.08
(c) Brick work in dry masonry for soak pit.
1.88
-
1912.55
Providing pre cast R.C.C. M-150 with nominal mix of (1:2:4) slab of desired size with approved quality of stone chips and clean coarse sand of FM 2.5 to 3 including curing, shuttering, carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement), taxes and royalty etc. all complete as per building specification and direction of E/I.
0.14
-
5583.25
Providing for reinforcement as per approved design and drawing excluding carriage of tor rod to work site including cutting bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per Specification and direction of E/I.
-
-
-
10 mm dia
0.01
-
53433.91
Supplying fitting and fixing P.V.C. Pipe/ P.V.C.fitting of approved make including earth work or providing scaffolding as the case may be all complete as per specification and direction of E/I.
-
-
-
100mm dia P.V.C. Band
2
-
100
50mm dia P.V.C. Cowel
1
-
70
50mm dia P.V.C.Vent pipe
2
-
104
100mm P.V.C. Pipe
15
-
162
Supplying materials and labours and fixing 20mm dia M.S bar steps in wall of 0.3 m interval and staggered in (1:2:4) cement concrete including scaffolding and curing etc. all complete as per specification and direction of E/I.
4
-
169.68
Supplying all materials, labours, tools and tackles and 100mm dia R.C.C hume pipe and laying jointing, testing, earth work including carriage of materials etc. all complete.
15
-
375.53
Supplying 50mm size brick bats and filling in soak pit including carriage and labours etc. all complete as per direction of E/I.
2
-
812.4
Supplying materials and labours for constructing inspection chamber of designation class 75 B bricks size 750mm deep, 600x450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600x475 mm G.I. Cover With frame ( Weight not less than 36 Kg.) along with earth work in excavation and 80mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per specification and direction of E/I
2
-
7096.95
Carriages of materials
-
-
-
(a) Brick -15 KM lead
2300
-
0.98
(b) Sand -10 KM lead
4.8
-
323.86
(c) Stone chips 5 KM lead
1.3
-
242.07
(d) Cement- 5 KM lead
1
-
151.3
Electrical Works
-
-
-
Wiring for light point with 1.5 sq. mm pvc insulated multi stand copper conductors cable on surface pvc casing capping as required
-
-
-
(I) Short point
10
-
176.06
(ii) Medium point
6
-
286.16
(iii) Long point
4
-
383.4
Wiring for fan point with 1.5 sq mm pvc insulated M/S copper conductor cable on surface pvc casing capping as required long point
2
-
458.84
Wiring for 5 pin 5 amp. plug point with 1.5 sq. mm pvc insulated M/S copper conductors cable on surface pvc casing capping including P/F 5 pin 5 amp. socket outlet and 5 amp. switch earthling the 3rd pin etc as per required.
10
-
192.61
Wiring for 3 pin 15 amp. plug point with 4 sq. mm pvc insulated M/S copper conductor cable on surface pvc cashing capping including P/F 3 pin 15 amp. switch socket combined earthling the 3rd pin as required Extra long point
4
-
1351.18
Wiring for circuit wiring with 2x2.5 sq, mm pvc insulated M/S copper conductor cable on surface pvc casing capping as required.
220
-
43.43
Wiring for sub main with 2x 10 sq. mm pvc insulated M/S copper conductor cable on surface pvc casing capping including connections as required.
150
-
135
S/F 32 amp. hush type D.P switch including connection etc as required.
2
-
145
S/F 32 amp. main switch fuse unit including holes on the band connection and earthling the body as required
2
-
739
S/F batten or angle holder complete including connection etc. as required
10
-
22.25
S/F twin twisted flexible wire for connection of tube light and fan as required.
25
-
4.5
S/F following size sun mica sheet cutting and fixing under switch socket
-
-
-
8"x6"
2
-
18
12"x18"
2
-
65
8"x12"
4
-
35
S/F indicator light as required
4
-
15
S/F fuse on the board as required
2
-
25
S/F earthling with earth plate 600 x 600 x 30mm thick with masonry enclosures on the top as required
2
-
1618.25
Extra for wiring salt and charcoal for copper earthling as required.
2
-
288.15
S/F bulk head fitting suitable for 100 watt lamp as required.
2
-
150
Earthing with G.I. earth pipe 4.5 M long 40mm dia including accessories and providing masonry enclosure with copper plate having locking arrangement and watering pipe etc with charcoal ,salt all complete as per electrical rule
2
-
1971
Supplying ,fitting and fixing 5 amp ceiling rose on the existing junction
5
-
19
Duty Room - 1 Unit (Please refer to Section 5,Sl. 2.9 of SBD)
-
-
-
E/W in Excavation in foundation trenches in land soil (Vide classification of soil Item -A) & disposal of excavatd earth obtained to a distance up to 50 M including all lift leveling ramming the foundation trenches removing root of trees scrubs all complete as per building specification & direction Of E/I
41
-
102.1
Providing ,coarse clean sand in filling in foudation trenches /in Plinth including ramming & watering in layers not exceeding 150 mm thick with all leads lift including cost of all materilas ,labour , royalty & taxes all complete as per building specification & direction Of E/I
3.42
-
228.47
Providing P.C.C M-100 in nominal mix of (1:3:6) in foundation with appoved quantity of stone metal (50 mm 25 mm dia size)graded & clean coarse sand of F.M 2.5 to 3 including screening , shuttering , mixing cement concrete in mixer & placing in position , vibrating , striking , curing taxes & royalty all complete as per building specification & direction of E/I
6.17
-
4188.87
Providing designation 75 A brick work in C.M. (1:6) in foundation 7 Plinth with approved quality of clean coarse sand of F.M 2 to 2.5 including Providing 10 mm thick mortar joints ,Cost of screening , materials , Scaffolding , raking out joints to 15 mm depth curing , taxes & royalty all complete as per building specification & direction of E/I
18.79
-
3921.08
Providing 25 mm thick damp proof coarse with cement concrete M-150 with nominal mix of (1:2:4) with approved quality of stone chips of 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to3 including screening , shuttering mixing cement concrete in mixer with 5% cico or any other approved water proffing compound and placing in position , vibrating , striing , curing , taxes & royalty all complete as per building specification & direction of E/I
11.84
-
176.74
Providing designation 75 A brick work in C.M (1:6) in super structure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing10 mm thick motar joints ,cost of screening , materials, scaffolding,raking out joints to 15 mm depth curing , taxes & royalty all complete as per building specification & direction of E/I
27
-
4011.07
Providing R.C.C M-200 with nominal mix of (1:1.5:3) in lintel level with approved quality of stone chips 20 mm to 6mm size graded & clean coarse sand of F.M 2.5 to including making drip course in concreteing , screening , concreting shuttering and mixing cement concrete in mixer & placing in position vibrating striking excluding the cost of reinforcement ) taxes & royalty all complete as per building specification of (E/I.
1.78
-
8065.45
Providing average 63 mm thick R.C.C M -200 with nominal mix (1:1.5:3) chajja in shelves with approved quality of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M 2.5 to 3 including making drip course in concrete , screening , centering shuttering & mixing cement concrete in mixer & placing in position vibrating ,striking ,6 mm cement plaster (1:4) in celling & sides of chajja with sand of F.M 1.5, Curing ( But excluding the cost of reinforcement ) taxes and royalty all complete as per building specification of E/I
2.7
-
983.24
Providing R.C.C M-200 with nominal mix of (1:1.5:3) in roof slab with approved quality of stone chips 20 mm to 6 mm size Graded & Clean coarse sand F.M 2.5 to including screening , shuttering ,mixing cement concrete in mixer & placing in position , vibrating ,striking, curing (but excluding the cost of reinforcement) taxes & royalty all complete as per building Specification & direction of the E/I
5.45
-
8235.61
Supplying fitting & fixing good quality ,well dressed & well seasoned sal wood work in choukhat in doors , windows , skylights , fan light and C/W celestial windows openings , including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls & lintels all complete as per building specification & direction of E/I
0.35
-
60278.85
Supplying fitting and fixing 250X20X6 mm L-type M.S Clamp properly fish tailed .including making holes and setting the same in 375 X125X75 mm cement concrete block (1:2:4) with cost of all labour and materials and taxes as per building specification and diection of E/I .
42
-
68.31
Supplying all materials , labours and fitting & fixing 38 mm (1.5) thick good quality seasoned sal wood battened shutter ledged & braced in door and windows with oxidized iron fitting such as hingles ,sliding door bolts , tower bolts , handles or ings hooks and eye , cleats , sand block as per schedule , taxes & royalty all complete as per building specification & direction of Engineer -in- charge
14.1
-
4311.52
Supplying , fittings & fixing M.S /Gril made of 20X6 mm M.S flat as per approved design & drawing properly fabricated with joints continous filllet welded and finshed smooth , carriage of grill to work site hoisting as per the building specification and direction of E/I ( where materials is not supplied by the Deptt .)
244.8
-
57.69
Providing and fixing fan hook of 16 mm dia M.S bar 1 meter long bent to reqired size and shape placed in position and fixing in R.C.C slab/beam at the time of casting all complete as per building specification of E/I where material is not supplied by cheet
3
-
97.3
Providing 6 mm thick cement plaster (1:4) in celling with approved quality of clean coarse sand of F.M 1.5 including screening , curing with all leads & lifts of water , scaffolding , taxes & royalty all complete as per building specification & direction of E/I
42.92
-
133.78
Providing 12 mm thick cement plaster (1:6) with approved quality of clean coarse sand of F.M 1.5 including screening .Curing with all leads & lifts of water , Scaffolding , taxes 7 royalty all complete as per building specification & direction of E/I.
243.41
-
125.34
Providing cement 1:3 (12mm ) plaster with cement mortar (1:3) using clean coarse sand finishing with neat punning a dado 6" (150 mm) high a side room and out side wall upto plinth level includng screening , curing with all leads & lifts of water , scaffolding , taxes and royalty all complete as per building specification & direction of E/I
28.29
-
191.59
Providing average 115mm. thick lime terracing (24 lime:36 surkhi : 100 brick khoa) well beaten and compacted including maintaining proper level and slope, making ghundi with finishing treatment, cost of carriage, curing, royalty and taxes all complete as per building specification and direction of E/l.
54.54
-
756.24
Earth work in filling in foudation trenches & Plinth in layers not exceeding 150 mm thick well watered ,rammed ,fully compacted & fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 m & lift of 1.5 m all complete as per building specification & direction of E/I
22.85
-
37.17
Providing average 150 mm thick dry rammed khoa beaten to 112 mm (compacted with water) made of well burnt jhama bricks including ramming properly till compacted thickness is achieved, curing and carriage of water with all leads, making proper slope and blending the top with cement mortar (1:10) all complete as per building specification and direction of E/l.
41.55
-
146.94
Providing 25 mm thick . First class patent stone flooring (1:2:4) with stone chips in two layers ,bottom layer 19 mm thick (1:2:4) with 12 mm to 6 mm size graded stone chips and top layer 6 mm thick (1:2) with 6 mm down stone chips in pannels including cost of curing , finishing the surface smooth by rubbing with carborandum stone taxes & royalty with all complete as per building specification & direction of E/I
41.55
-
271.41
White washing three coats over new surface with approved quality of lime including cost of cleaning surface thoroughly and removing the scales of smoke and mosh marks with jhama rubbing, scaffolding, washing, of floors and taxes all complete as per building specification and direction of E/l.
176.97
-
12.03
Colour washing two coat over a coat of white wash over old surface with approved quality of lime in approved shade including cost of cleaning surface thoroughly and removing the scales of smoke and mosh marks with jhama rubbing, scaffolding, washing, of floors and taxes all complete as per building specification and direction of E/l.
109.36
-
17.67
Providing two coats of painting with ready mixed paint over a coat of primer of approved shade and make over new wooden surface including pareparing the surface after cleaning, removing dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specfication and direction of E/l
14.1
-
91.23
Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning , removing rust ,dirt ,scales ,smokes and grease and cleaning the surface thouroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I
13.77
-
41.89
Providing two coats of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l.
13.77
-
56.85
Providing Tor steel reinforcement of 8mm. dia. rods as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. TMT Fe 500 (Only valid for SAIL and TATA)
0.7
-
53433.91
Carriage of materials from divisional store or kiln site or quarry site to work site including contract profit, loading, unloading, transportation, etc. all complete .
-
-
-
Cement 5 KM lead
12.75
-
151.3
Steel 5 KM lead
0.7
-
151.3
Sand 10 KM lead
37.68
-
323.86
Bricks 15 KM lead
26733
-
0.98
Stone/Stone Chips 5 KM lead
13.32
-
242.07
(B) Water Supply and Sanitation Installation (Plumbing Work) -
-
-
-
Supplying and laying GI pipes of approved make in trenches with red lead and yarn with socket and screw joints and cutting pipes in size and threading ends where necessary including carriage of materials up to work site etc. all complete as per specification and direction of E/I.
-
-
-
i) 25mm GI. Pipe.
15
-
297.88
ii) 15 mm GI. Pipe.
25
-
206.81
Supplying materials and labours for fixing GI Pipes with red lead paints and yarn with screwed and sockted joints on wall, celling and floor including supplying of wall hooks of pipe clamp, wooden plugs, cutting pipe to size and threading ends where necessary all complete as per specification and direction of E/I.
-
-
-
i) 15 mm GI. Pipe
25
-
206.81
Supplying, fitting and fixing of GM ferrule of approved make in DI/CI main including drilling and tapping CI/DI main etc. all complete as per specification and direction of E/I.
2
-
416.01
Supplying and fixing GI fittings of approved make all complete as per direction of E/I.
-
-
-
(a) Elbow 15 mm dia
15
-
46.39
(b) Tee plane 15mm dia
5
-
52.14
(c) Nipple 15mm dia.
15
-
45.24
(d) Union Socket 25mm dia
2
-
130.74
(e) Union Socket 15mm dia
3
-
77.44
(f) Brass bib cock 15mm dia
5
-
152.19
(g) C.I stop cock 15mm dia
5
-
136.09
(h) C.I. stop cock 25mm dia
2
-
346.94
(i) Reducing Socket 25x15mm
3
-
64.26
(j) Tee 25x25x15mm dia
5
-
98.27
Supplying, fitting and fixing vitreous white glazed earthen were I W C of parry Hindustan or any other I.S.S approved make with 100 mm HCI ‘P’ trap, 15 Liters CI pull and let go flushing cistern of names or other ISS equivalent make complete with all fittings C.I. or C.C brackets, 32 mm, alkathene /PVC telescopic flush pipe about 2 mtrs. long with one brass coupling and clamps, GI chain and pull including supplying and fixing a pair of vitreous white glazed earthen were footrest to be fixed in floor, 15 mm .CI body brass spindle, stopcock of weight not less than 50 grams, 15 mm. PVC connection pipe 450 mm. long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. White vitreous China Orrisa pattern W.C. Pan of 510mm.long with 10.0 Liter low level PVC System.
1
-
3771.02
SEPTIC TANK AND SOAK PIT
-
-
-
Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item-B) and disposal of excavated earth as obtained to a distance up to 50 m including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/I.
1
-
102.1
Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of E/I.
2.89
-
228.47
Providing designation 75A one Brick flat soling, joints filled with local sand including cost of watering, tax, royalty all complete as per building specification and direction of E/I.
4.76
-
233.78
Providing P.C.C M150 with nominal mix of (1:2:4) in foundation with approved stone chips 20mm to 6mm size well graded and clean course sand of FM-2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, Vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.
0.14
-
5913.66
Providing water proof cement plaster (1:3) with clean course sand of F.M- 1.5mm with 5% cico or any other approved water proofing compound including taxes and royalty all complete as per building specification and directions of E/I.
-
-
-
(a) 19 mm thick
1.8
-
218.34
(b) 12 mm thick
9.86
-
154.79
Providing designation 75A bricks work in C.M. in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints, cost of screening materials racking out joints to 15 mm. depth, curing taxes and royalty all complete as per building specification and direction of E/I.
-
-
-
(a) B/W in C.M (1:4)
2.78
-
4175
(b) B/W 75-A in (1:6) for Soak pit
0.53
-
3921.08
(c) Brick work in dry masonry for soak pit.
1.88
-
1912.55
Providing pre cast R.C.C. M-150 with nominal mix of (1:2:4) slab of desired size with approved quality of stone chips and clean coarse sand of FM 2.5 to 3 including curing, shuttering, carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement), taxes and royalty etc. all complete as per building specification and direction of E/I.
0.14
-
5583.25
Providing for reinforcement as per approved design and drawing excluding carriage of tor rod to work site including cutting bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per Specification and direction of E/I.
-
-
-
10 mm dia
0.01
-
53433.91
Supplying fitting and fixing P.V.C. Pipe/ P.V.C.fitting of approved make including earth work or providing scaffolding as the case may be all complete as per specification and direction of E/I.
-
-
-
100mm dia P.V.C. Band
2
-
100
50mm dia P.V.C. Cowel
1
-
70
50mm dia P.V.C.Vent pipe
2
-
104
100mm P.V.C. Pipe
15
-
162
Supplying materials and labours and fixing 20mm dia M.S bar steps in wall of 0.3 m interval and staggered in (1:2:4) cement concrete including scaffolding and curing etc. all complete as per specification and direction of E/I.
4
-
169.68
Supplying all materials, labours, tools and tackles and 100mm dia R.C.C hume pipe and laying jointing, testing, earth work including carriage of materials etc. all complete.
15
-
375.53
Supplying 50mm size brick bats and filling in soak pit including carriage and labours etc. all complete as per direction of E/I.
2
-
812.4
Supplying materials and labours for constructing inspection chamber of designation class 75 B bricks size 750mm deep, 600x450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600x475 mm G.I. Cover With frame ( Weight not less than 36 Kg.) along with earth work in excavation and 80mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per specification and direction of E/I
2
-
7096.95
Carriages of materials
-
-
-
(a) Brick -15 KM lead
2300
-
0.98
(b) Sand -10 KM lead
4.8
-
323.86
(c) Stone chips 5 KM lead
1.3
-
242.07
(d) Cement- 5 KM lead
1
-
151.3
(e) Steel- 5 KM lead
0.01
-
151.3
Electrical Works
-
-
-
Wiring for light point with 1.5 sq. mm pvc insulated multi stand copper conductors cable on surface pvc casing capping as required
-
-
-
(i)Short point
6
-
176.06
(ii)Medium point
4
-
286.16
(iii)long point
2
-
383.4
Wiring for fan point with 1.5 sq mm pvc insulated M/S copper conductor cable on surface pvc casing capping as required long point
1
-
458.84
Wiring for 5 pin 5 amp. plug point with 1.5 sq. mm pvc insulated M/S copper conductors cable on surface pvc casing capping including P/F 5 pin 5 amp. socket outlet and 5 amp. switch earthling the 3rd pin etc as per required.
5
-
192.61
Wiring for 3 pin 15 amp. plug point with 4 sq. mm pvc insulated M/S copper conductor cable on surface pvc cashing capping including P/F 3 pin 15 amp. switch socket combined earthling the 3rd pin as required Extra long point
2
-
1351.18
Wiring for circuit wiring with 2x2.5 sq, mm pvc insulated M/S copper conductor cable on surface pvc casing capping as required.
120
-
43.43
Wiring for sub main with 2x 10 sq. mm pvc insulated M/S copper conductor cable on surface pvc casing capping including connections as required.
100
-
135
S/F 32 amp. hush type D.P switch including connection etc as required.
1
-
145
S/F 32 amp. main switch fuse unit including holes on the band connection and earthling the body as required
1
-
739
S/F batten or angle holder complete including connection etc. as required
6
-
22.25
S/F twin twisted flexible wire for connection of tube light and fan as required.
15
-
4.5
S/F following size sun mica sheet cutting and fixing under switch socket
-
-
-
8"x6"
1
-
18
12"x18"
1
-
65
8"x12"
2
-
35
S/F indicator light as required
2
-
15
S/F fuse on the board as required
1
-
25
S/F earthling with earth plate 600 x 600 x 30mm thick with masonry enclosures on the top as required
1
-
1618.25
Extra for wiring salt and charcoal for copper earthling as required.
1
-
288.15
S/F bulk head fitting suitable for 100 watt lamp as required.
1
-
150
Earthing with G.I. earth pipe 4.5 M long 40mm dia including accessories and providing masonry enclosure with copper plate having locking arrangement and watering pipe etc with charcoal ,salt all complete as per electrical rule
1
-
1971
Supplying ,fitting and fixing 5 amp ceiling rose on the existing junction
3
-
19
Approach Road to W.T.P
-
-
-
Doing Geotechnical Survey Collecting field data, designing, getting it approved by Competent authority.
-
-
-
Excavation in cutting in soil by manual means with load 50m. Excavation for road way in soil using manual means for carrying cut earth to embankment site with a lift up to 1.5m and lead up to 50m as per technical specification clause 302.3.
90
-
102.1
Providing coarse sand filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150 mm thick with all leads including cost of materials, labour, royalty and taxes all complete as per building specification and direction of E/I.
13.5
-
228.47
Providing designation 75A one brick flat soiling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I.
180
-
233.78
Providing P.C.C. M-100 width nominal mix of (1:3:6) in foundation with approved quality stone metal grade-III (50mm to 25mm), size clean coarse sand of FM 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all concrete as per building specification and direction of E/I.
27
-
4188.87
Cement Concrete Pavement Construction of non-reinforcement dowel jointed at expansion and construction joint only plain cement concrete pavement thickness as per design over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2 M-30 (grade) coarse and fine aggregates 25mm mixed in a concrete mixer of not less than 0.2 cum capacity and approximate weight batcher using approved mix design, laid in approved fixed side form work (steel channel laying and fixing of 125 micron thick polythene firm wedges steel plates including leveling the form work as per drawing) spreading the concrete with sovels, rakes, compacted using needle screed and plate vibrators and finished in continuous operation including provision of construction and expansion joint, construction joints applying de bonding stripes, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14 days. Using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification clause 1501.
36
-
4988
Providng and laying boulder apron for bed protection with stone and weight as per table 1300.1 fragmanet weighing less than 25 kg laid dry complete as per drawing and technical specifications clause 1301
27
-
1009
Carriage of material from divisional store are kiln side or quality side to work including contractor profit loading unloading transportation are complete
-
-
-
Cement 5 KM lead
20.85
-
151.3
Sand 10 KM lead
44.59
-
323.86
Stone/Stone Chips 5 KM lead
56.7
-
242.07
Boulder 5 KM lead
4.05
-
252.16
Bricks 15 KM lead
5808
-
0.98
Boundary wall -2 nos. Place one at WTP and other at sump cum pump house Lathea.
-
-
-
Doing Geotechnical Survey Collecting field data, designing, getting it approved by Competent authority.
-
-
-
E/W. in excavation in foundation trenches in ordinary soil (vide classification of soil item A) &disposal of excavated earth obtained to a distance up to 50 M including all lift leveling, , ramming the foundation trenches removing root of trees, scrubs all complete as per approved design.
199.92
-
102.1
Earthwork in back filling the trenches after laying different types and sizes of pipes with earth removed during excavation within initial lead and lift as per specification and design of E/I. (For classification of soil item B & C)
159.94
-
31.44
Providing PCC M 75 with nominal mix of (1:4:8). in foundation with approved quality of stone metal grade‐III (50 mm to 25 mm) size clean coarse sand of F.M. 2.5 to 3 including screening , shuttering mixing cement concrete in mixer and placing in position vibrating , striking, curing , taxes and royalty all complete as per building specification and direction of EIC
10.88
-
3796.47
Providing RCC M 150 with nominal mix of .(1:2:4) in columns with approved quality of stone chips 20mm to6mm size graded and clean coarse sand of F.M. 2.5 to 3 including shuttering mixing cement concrete in mixer and placing in position vibrating , striking , curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of EIC
97.8
-
7018.17
Providing reinforcement as per approved design and drawing excluding carriage of tor rod to work site including cutting bending and binding with annealed write with cost of wore removal of rust placing the dodo in position all complete as per specification and direction of E/I.
6.14
-
53433.91
Providing designation 75A brickwork in C.M (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15 mm depth , curing taxes and royalty all complete as per building specification and direction of EIC
174.38
-
3921.08
Providing 12 mm thick plaster (1:6) with clean coarse sand of F.M. 1.5 including screening , curing with all leads and lifts of water , scaffolding taxes and royalty all complete as per building specification and direction of EIC
1824.9
-
125.34
Color washing two coasts over a coat of white. wash over new surface with appropriate quality of lime in approves shaded including a coat of cleaning surface thoroughly and removing the scales of smoke & ash marks with jhama rubbing, scaffolding washing of floors and taxes all complete as per building specification and direction of/IE
1824.9
-
17.67
Supplying MS Angle 50 x 50 x 6 mm
0.6
-
40645.57
Labour for cutting of MS Angle iron post to required length, one end splitted as finistailed in a length of 150mm complete as per building specification and direction of E/I
1340
-
18.96
Supply of Barbed Wire 12 SWG 4 point, 2 ply,, 150mm apart
88.92
-
67.48
Labour for fitting and fixing barbed wire fencing in four rows horizontal up to a height of 1.25M and two diagonals including fixing of in concrete at 2.5m centers including cost of staples.
480
-
34.88
Supplying, fitting & fixing M.S./Grill gate made12 of 20*6 mm M.S. Flat as per approved design & drawing properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per the building specification and direction ofE/I. (where materials is not supplied by the Dept.)
219
-
57.69
Carriage of material from divisional store are kiln side or quality side to work including contractor profit loading unloading transportation are complete
-
-
-
Cement 5 KM lead
57.48
-
151.3
Steel 5 KM lead
6.14
-
151.3
Sand 10 KM lead
136.64
-
323.46
Bricks 15 KM lead
70810
-
0.98
Stone Chips 5 KM lead
97.81
-
242.07
House Connection for 9755 nos Consumer.
-
-
-
Providing ,installing and giving satisfactory field testing of 15 mm dia ( without remote reading facility) Domestic Water Meter, horizontal inferential single or multijet Domestic Water test certificate and guarantee certificate including cost of all 779/1994 (VI Revision) with ISI mark along with manufacturer's couplings at both ends and confirming to class " B as per IS temperature duly sealed against tempering complete with magnetic drive and dry dial suitable for ambit 500 C meter , horizontal inferential single or multijet
9755
-
955
Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dia ferrule weight not less than 425 gram
9755
-
416.01
Providing and fixing gun metal full way valve of 15mm dia and weight not less than 300 gram all complete as per specification and direction of E/I.
9755
-
293.64
Providing and supplying blue MDPE pipes confirming to ISO 4427:1996 manufactured from vergin resin PE 80 food grade compounded raw material having blue colour only with quality assurance certificate from quality agencies like WRC / CIPET ( India) / DVGM / KIWA / SPGN for usage in drinking water with quality system all complete including cost all taxes, inspection charges transportation to work site and earth work involved, all complete job as per specification and direction of E/I. 20 mm dia pipe
97550
-
28
Providing and supplying of compression fittings PN-16 rated in confirmation to ISO 14236:2000 and shall be tested as per ISO:3459,ISO : 3501 and ISO:3503 sitable for drinking water and approved by WRAS / UK / KIWA etc in food grade poly propyline and shall be inclusive of all cost such as testing, all taxes , inspection charges, transportation to work site as per specification and direction of E/I.
-
-
-
Metal inserted female threaded adapter 20 x 1/2"
9755
-
73
Elbow 90 degree 20 mm dia
19510
-
130
Coupling 20 x 20 mm dia
19510
-
70
Earth work in excavation(as per IS 3114/1965 for laying of different types and sizes of pipes so as to give one meter average cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per specification and direction of E/I.(For soil item B)
32971.9
-
86.22
Earth work in back fillingthe trenches after laying of different types and sizes of pipes with earth removed during excavation within initial lead and lift as per specification and direction of E/I.(For soil item A & B)
29265
-
53.89
Saddle piece (Polythine Materials) only for HDPE Pipe.
9755
-
275
Operation & Maintenance for two years
-
-
-
O/M work with Labour component & Materials for 1st Year
-
-
-
As per SBD Section - 5 Clouse 9.10
1384611
-
0.7
O/M work with Labour component & Materials for 2nd Year
-
-
-
As per SBD Section - 5 Clouse 9.10
1384611
-
2.23
Add 1% Labour Cess
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements