Central Coalfields Limited Tender
... More
The CCL has issued a formal invitation for competitive bids for the Central Coalfields Limited project, for Strengthening And Beautification Of Outer Wall And Construction Of Stage In The Ground Of Public High School Kuju Under Csr Scheme 2026-27 Of Kuju Area, Ccl. in Ramgarh, Jharkhand, with an estimated contract value of Rs. 14,96,711. The bid opening date for this tender is 04-11-2026 and the last date for bid submission is 16-11-2026. Interested bidders for Central Coalfields Limited tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Central Coalfields Limited - CCL Tender - Jharkhand Tender
Opening Date4 Nov 2026
Closing Date16 Nov 2026
Tender Amount₹ 14,96,711
Costs
EMD
₹ 18,800Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Strengthening And Beautification Of Outer Wall And Construction Of Stage In The Ground Of Public High School Kuju Under Csr Scheme 2026-27 Of Kuju Area, Ccl.
Contact
Tender Id
2026_CCL_368217_1Tender No
GM(K)/SOC/e-NIT/CSR/26-27/407Tender Authority
Central Coalfields Limited ViewPurchaser Address
-Website
http://www.centralcoalfields.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Strengthening and beautification of outer wall and construction of stage in the ground of Public High School Kuju under CSR scheme 2026-27 of Kuju Area, CCL.
Strengthening and beautification of outer wall and construction of stage in the ground of Public High School Kuju under CSR scheme 2026-27 of Kuju Area, CCL.
BOQ Items
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -1:3:6 (1 Cement : 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)
2.349
6773
15912.01
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
7.207000000000001
8343
60131.24
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natu ral sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
2.85
9466
26978.1
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
5.405
9829
53128.72
... More
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete :Thermo-Mechanically Treated bars of grade Fe-500D or more.
1546.2
105
163278.72
... More
Centring and shuttering including strutting, propping etc. and removal of form for removal of form for: (A) Foundations, footings, bases of columns, etc. for mass concrete.
25.17
277
6994.74
... More
Centring and shuttering including strutting, propping etc. and removal of form for removal of form for: (D)Columns, Pillars, Piers, Abutments, Posts and Struts
37.800000000000004
651
24626.7
... More
Centring and shuttering including strutting, propping etc. and removal of form for removal of form for: ( B ) Lintels, beams, plinth beams, girders, bressumers and cantilevers.
45.211
513
23209.07
... More
Centring and shuttering including strutting, propping etc. and removal of form for removal of form for:Suspended floors, roofs, landings, balconies and access platform.
21.79
630
13727.7
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 5.0 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
11.1
6770
75147.55
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6(1 cement : 6 coarse sand).
6.075
7988
48532.87
... More
6 mm cement plaster of mix: 1:3(1 cement :3 fine sand).
99.91000000000001
207
20696.36
... More
12 mm cement plaster of mix: 1:6(1 cement: 6 fine sand).
946.8000000000001
230
218332.08
... More
Finishing walls with textured exterior paint of required shade: New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm.
132.61
202
26846.89
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes.
800
115
92160
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
8
112
898.4
... More
Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil.
42
20
861
... More
Providing and fixing of Black Granite inauguration plate with writing as per direction of EIC.
6
580
3484.5
... More
Providing and fixing (including all tools & tackles and materials etc) of Gold(LED Color ) Stainless Steel Gold LED Letter Sign as per direction of EIC.
400
216
86616
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
18.9
114
2171.61
... More
Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6 mm for diagonal braces and central cross piece.
1.62
4422
7164.69
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron).
2.436
556
1355.27
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately).Powder coated aluminium (minimum thickness of powder coating 50 micron).
2.976
624
1858.96
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm).
1.62
921
1493.24
... More
Providing and laying vitrified floor tiles in diferent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm.
4.83
1385
6690.52
... More
Finishing walls with water proofing cement paint of required shade: New work (Two or more coats applied @ 3.84 kg/10 sqm).
2320.5
80
187148.33
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
204.7
33
6796.04
... More
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
494
10
5211.7
... More
Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks.
42
767
32224.5
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding.
16.2
177
2873.88
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources).
6.3
7424
46774.03
... More
Total impact of GST for the purpose of CTC
1
-
-

