Central Coalfields Limited Tender

... More
The CCL has issued a formal invitation for competitive bids for the Central Coalfields Limited project, for Comprehensive Annual Maintenance Of Different Types Of Quarter At Gm Colony And Chd Colony Under Gm Unit, Dhori Area in Bokaro, Jharkhand, with an estimated contract value of Rs. 2,24,31,641. The bid opening date for this tender is 14-11-2026 and the last date for bid submission is 30-11-2026. Interested bidders for Central Coalfields Limited tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Central Coalfields Limited - CCL Tender - Jharkhand Tender

Opening Date14 Nov 2026
Closing Date30 Nov 2026
Tender Amount₹ 2,24,31,641 
Notes
Download

Costs

Description

Comprehensive Annual Maintenance Of Different Types Of Quarter At Gm Colony And Chd Colony Under Gm Unit, Dhori Area

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level: 1:3:6 ( 1 Cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

2.16

6773

14631.73

... More
Providing, hoisting and fixing upto floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like including the cost of required centring, shuttering, finishing smooth sills and the like including the cost of required centring, shuttering, finishing smooth with 6 mm thick cement plaster 1:3 (1 cement: 3 fine sand) on exposed surfaces complete but excluding cost of reinforcement with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size).

2.7

9432

25468.97

... More
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars

189

105

19958.4

... More
Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)

21.9

6770

148264.1

... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

31

7988

247657.45

... More
Half brick masonry with F.P.S. bricks of class designation 75 in foundation and plinth in:Cement mortar 1 : 4 (1 cement : 4coarse sand)

50

844

42207.5

... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level: Cement mortar 1:4 (1 cement :4 coarse sand)

75

977

73331.25

... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade.Area of slab over 0.50 sqm

14.4

4032

58073.76

... More
Extra for providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite work.

36

309

11152.8

... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately):Sal wood

2.55

84821

216294.57

... More
Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

87.13

1803

157173.81

... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked black enamelled M.S butt hinges with necessary screws excluding panelling which will be paid for separately. Kiln seasoned and chemically treated Hollock wood.30 mm thick shutters

8

2042

16339.2

... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (A rea of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 m m to 40 mm thick :kiln seasoned and chemically treated Hollock wood

18

1853

33366.6

... More
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws.

54

1784

96381.9

... More
Providing and fixing M.S. grills of required pattern in frames of windowsetc. with M.S. flats, square or round bars etc. including priming coat withapproved steel primer all complete. Fixed to steel windows by welding

270

177

47898

... More
Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

310

179

55660.5

... More
Providing and fixing IS : 1341 marked M.S. heavy weight butt hinges with necessary screws etc. complete :125x90x4.00 mm

460

45

21045

... More
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : (copper oxidized as per IS: 1378) 9.62.2 250x16 mm

80

142

11436

... More
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : (copper oxidized as per IS: 1378) 200x10 mm

80

50

4068

... More
Providing and fixing chromium plated brass handles with necessary screws etc. complete: 125 mm

160

196

31408

... More
Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.Twin rubber stopper

50

74

3735

... More
Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, thevertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge.

88

458

40348

... More
Providing and fixing to existing door frames.30mm thick factory made solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, top & bottom rails. M.S .frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm thick heat moulded PVC ‘C channel of size 30mm thickness, 110mm width out of which 90mm shall be flat and 20mm shall be tapered in 45 degree angle on either side forming stiles; and 5mm thick, 110mm wide PVC sheet out of which 90mm shall be flat and 20mm shall be tapered on the inner side to form top and bottom rail and 130mm wide PVC sheet out of which 90mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top bottom and lock rails shall be provided either side of the panel. 10mm (5mm x2) thick, 20mm wide cross PVC sheet shall be provided as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with 7mm (5mm +2mm) thick x 15mm wide PVC sheet bending on inner side, and joined together with solvent cem ent adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacture’s specification & drawing.

29.25

2884

84378.94

... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

5508

114

632869.2

... More
Providing and fixing bolts including nuts and washers complete.

50

109

5480

... More
Welding by gas or electric plant including transportion of plant at site etc. complete.

5000

3

18000

... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate

400

500

200120

... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement: 4 coarse sand):25 mm thick.

11.52

1374

15836.54

... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

132

1131

149371.2

... More
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Dark shade pigment using ordinary cement sqm 836.10

247.5

836

206934.75

... More
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete.

54

1037

56016.9

... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 60x60 cm

120

1385

166224

... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600mm

30

1424

42735

... More
Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 nnm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required

126

420

52926.3

... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes: 110 mm diameter

360

338

121860

... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised R igid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.Single tee with door.110x110x110 mm

40

184

7388

... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised R igid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 110 mm bend

40

148

5954

... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised R igid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.Single tee with door.110x110x110 mm.Shoe (Plain).110 mm Shoe

40

299

11994

... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete:110mm each

320

242

77552

... More
Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as 5% total coated thickness (TC T), Zinc coating 120gsm as per IS:277 in approved by Engineer-in-charge) 0.05 mm. 240 mpa mm steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

113.4

698

79164.54

... More
12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) .

726

230

167415.6

... More
12 mm cement plaster finished with a floating coat of neat cement of mix1:4 (1 cement: 4 fine sand)

200

303

60640

... More
20 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

400

338

135520

... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

819.09

112

91983.81

... More
Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

1600

114

183920

... More
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete,including disposal of rubbish to the dumping ground within 50 metres lead :With cement mortar 1:4 (1 cement : 4 fine sand)

600

378

226830

... More
Renewing glass panes, with putty and nails wherever necessary:Float glass panes of thickness 4 mm

14.4

786

11329.92

... More
Colour washing such as green, blue or buff to give an even shade :—New work (two or more coats) with a base coat of white washing with lime

4800

34

166080

... More
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

12140

15

193026

... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :Old work (one or more coats)

13260

40

533715

... More
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats

9975

103

1036901.25

... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

5430

73

398562

... More
Finishing walls with water proofing cement paint of required shade :Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat.

8800

74

651640

... More
Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/10 sqm) on existing cement paint surface).

9960

87

871500

... More
Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge.

30

264

7947

... More
Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge.

90

81

7312.5

... More
Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

100

276

27675

... More
Providing and laying APP (Atactic Polypropylene Polymer) modifie primer for bitumen membrane @ 0.40 litre/sqm by the same mem manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70 Over the primer coat the layer of membrane shall be laid using But and sealing all joints etc, and preparing the surface complete. The physical and chemical parameters of the membrane shall be as un strength in longitudinal and transverse direction at 23°C as 650/ 45 Tear strength in longitudinal and transverse direction as 300/ 250N point of membrane not less than 150°C. Cold flexibility shall be up when tested in accordance with ASTM, D - 5147. The laying of me be got done through the authorised applicator of the manufacture membrane :3mm

1200

482

578640

... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer in charge.1:3:6 or richer mix

48

1464

70300.8

... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge:In cement mortar

40

1238

49532

... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area upto 3 sq. metres

210

227

47691

... More
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

190.5

45

8648.7

... More
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:Asbestos Cement sheet

126

47

5991.3

... More
Dismantling of flushing cistern of all types (C.I /PVCNitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

40

69

2782

... More
Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metresUp to 150 mm diameter

230

207

47667.5

... More
Dismantling old plaster or skirting raking out joints and cleaning the surfacefor plaster including disposal of rubbish to the dumping ground within 50metres lead.

600

33

19920

... More
Dism antling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes manually / by machanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :15 mm to 40 mm nominal bore

550

92

50985

... More
Dism antling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes manually / by machanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :Above 40 mm nominal bore

600

102

61470

... More
Providing and laying 60 mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge

100

670

67005

... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :W.C pan with ISI marked white solid plastic seat and lid

30

4294

128820

... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap.

40

2008

80358

... More
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

10

2193

21939.5

... More
Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink without drain board. 610x460 mm bowl depth 200 mm.

10

4038

40388

... More
Providing and fixing white vitreous china water closet squatting pan (Indian type). Orissa pattern W.C . pan of size 580x440 mm

30

1757

52737

... More
Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.

10

1699

16998

... More
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity-White

40

911

36462

... More
Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :White solid plastic seat with lid

40

431

17252

... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe.32mm dia

80

85

6824

... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357mm

40

897

35910

... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour.600mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms.

50

596

29807.5

... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC ) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with o ne step C PVC solven t cement and testing of joints com plete as per direction of Engineer in Charge. (Internal work Exposed on wall)15 mm nominal outer dia .Pipes.

360

214

77256

... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge:20 mm nominal outer dia Pipes

360

279

100512

... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge:25 mm nominal outer dia Pipes

270

332

89653.5

... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.15 mm nominal dia Pipes

270

366

98928

... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work):50 mm dia. nominal bore

180

710

127881

... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work):80 mm dia. nominal bore

120

1117

134154

... More
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required 100 mm dia Metre 1,579.00

60

1579

94740

... More
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required 150 mm dia Metre 2,386.00

48

2386

114528

... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :25 to 40 mm nominal bore

50

592

29607.5

... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :50 to 80 mm nominal bore

30

1063

31915.5

... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 25 mm nominal bore

50

440

22025

... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 40 mm nominal bore

40

605

24236

... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):50 mm nominal bore

30

772

23161.5

... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):80 mm nominal bore

30

2141

64258.5

... More
Providing and fixing ball valve (brass) of approved quality complete :High or low pressure with plastic floats:25 mm nominal bore

50

343

17157.5

... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:100 mm diameter

40

74

2966

... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately):100 mm diameter.Class II

20

5221

104432

... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately)150 mm diameter.Class II

10

7642

76422.5

... More
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required :15 mm nominal bore.

30

573

17199

... More
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required :20mm nominal bore.

30

596

17896.5

... More
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required :25 mm nominal bore.

30

608

18244.5

... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

30000

9

288000

... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15mm

60

693

41610

... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931:15mm

50

462

23140

... More
Providing and fixing PTMT bib cock of approved quality and colour.15mm nominal bore, 86 mm long, weighing not less than 88 gms.

160

172

27664

... More
Providing and fixing PTMT pillar cock of approved quality and colour .15mm nominal bore, 125mm long foam flow, Weighing not less than 120 gms.

50

327

16390

... More
Providing and fixing PTMT grating of approved quality and colour.Rectangular type with openable circular lid.150 mm nominal size square 100 mm diameter of the inner hinged round grating.

50

168

8405

... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately): For fixed portion.Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

162

528

85584.6

... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately): For fixed portion. Powder coated aluminium (minimum thickness of powder coating 50 micron)For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately)..Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

216

596

128854.8

... More
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side

9

856

7705.8

... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.00 mm thickness

9

921

8295.75

... More
Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

20

7562

151254

... More
Laying G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work):50 mm dia. nominal bore

120

125

15074.4

... More
Laying G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work):80 mm dia. nominal bore

90

156

14100.3

... More
Supplying labours, tools and tackles for cleaning filled and choaked man hole, septic tank, inspection-chamber, gullay pits, sewerage tank etc. in all lift and disposal of spoils upto a lead of 50M all complete as per specification and direction of Engineer-in-charge.

277.2

1255

348099.44

... More
Supplying and stacking at site.Stone screening 11.2 mm nominal size (Type B)

75

1324

99307.5

... More
Supply of 15mm size C.P.Brass pillar cock (Jaquar or its equivalent) all complete as per instruction of EIC

10

1978

19780.3

... More
Supply of overhead shower 100mm dia round shape single flow (ABS body chrome plated with gray face plate) with rubit cleaning system and shower arm casted 190 mm long light body round shape for wall mounted showers with wall flange ( JAQUAR or equivalent) all complete as per instruction of EIC.

10

1494

14948.5

... More
Supplying C.P. angle Cock With Wall flange for basin mixer and geyser points 15 mm nominal bore (Jaquar or its equivalent) all complete as per instruction of EIC.

20

1133

22672.4

... More
Supplying Wall mixer 3 in 1 With Wall flange (Jaquar or its equivalent) as per instruction of EIC.

10

6849

68493.7

... More
Supplying Hand Shower (Health Faucet) with 8mm Dia 1.2 Meter Long Flexible Chrome Tube and Wall Hook (Jaquar or its equivalent) as per direction of EIC

40

1061

42464.4

... More
Supply of counter table top basin (Jaquar or its equivalent) complete as per instruction of EIC.

5

5498

27492.7

... More
Supply of two way bib cock with wall flange (jaquar or equivalent) complete as per instruction of EIC.

10

1978

19780.3

... More
Providing unplasticized Polyvinyl Chloride (uPVC) pipes : (External work): 40 mm dia SCH 80 as per ASTM-D1785 as per direction of EIC. (supreme,astral or equivalent.)

480

300

144398.4

... More
Providing unplasticized Polyvinyl Chloride (uPVC) pipes : (External work): 25 mm dia SCH 80 as per ASTM-D1785 as per direction of EIC. (supreme,astral or equivalent.)

360

137

49341.6

... More
Deployment of Facility Manager for heading the entire team and single point of contact & overall incharge of FM on site operators and reporting to Engineer-in- charge or his representative. (Note: Facility Manager is to be deployed on monthly basis only)

24

31232

749585.76

... More
Lifting of submersible pump-motor set from deep bore well with rigid PVC pipe of 50 mm dia including all accessories etc. complete including stacking all materials as per instruction of Engineer-in-charge.

5

4010

20053.25

... More
Lowering and commissioning of submersible pump in the deep bore well with rigid PVC pipe, all accessories ect. Complete including cost of labour but excluding the cost of materials and fittings (Cost of pump, cable, rigid PVC pipe, control panel to be paid separately)

5

2737

13687.4

... More
Providing rigid PVC pipe of 50 mm outer dia conforming to IS: 4985 (6kgf/sqcm) as per instruction of Engineer-in-charge.

120

545

65509.2

... More
Providing of Nylone rope 12mm dia

150

177

26577

... More
Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any Gl fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) (CPWD DSR'16 Item No. 14.75A)

900000

-

270000

... More
Cleaning of under ground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i)Tank shall be emptied of water by pumping & bottom shall be cleaned of slit and other deposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge. (CPWD DSR'16 Item No. 14.78)

939.28

55

51848.26

... More
Clearing jungle including uprooting of rank vegetation, grass, brush,wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared

18656

10

196820.8

... More
Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared. (CPWD DSR'14, Item No. 2.32)

17490

5

94446

... More
Cleaning of surface drain including disposal of muck, sludge through trolley or other arrangement at a specified place (in no case it should be kept on drain bank) within a lead of 1 KM with all tolls and tackles complete as per instruction of Engineer-in-charge (On average 1106.00 metre of drain to be cleaned daily by engaging minimum 5 nos. of labour). Upto 300 mm wide drain.

30528

2

79067.52

... More
Cleaning of all type of roofs including removal of dry leaves, weeding and cleaning drain holes,brooming etc. all complete with tools and tackels and stacking the garbage at specified places as per instruction of EIC.

24908.8

3

80704.51

... More
Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Light point

1200

827

992400

... More
Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Fan point

450

827

372150

... More
Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Tube light point

550

827

454850

... More
Supplying and fixing metal box of 150mm × 75mm × 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front, including providing and fixing 3-pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required. Exhaust

125

827

103375

... More
Supplying and fixing metal box of 180mm × 100mm × 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front, including providing and fixing 6-pin 5/6 A and 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required. Call bell

53

827

43831

... More
Supplying and fixing metal box of 180mm × 100mm × 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front, including providing and fixing 6-pin 5/6 A and 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.

350

404

141400

... More
Supplying and fixing metal box of 150mm × 75mm × 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front, including providing and fixing 3-pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required.

725

290

210250

... More
Supplying and fixing 32 A rating, 240/415 V, 10 kA, 'C' curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB, complete with connections, testing and commissioning etc. as required. Single pole and neutral

350

518

181300

... More
Supplying and fixing following way, single pole and neutral, sheet steel MCB distribution board, 240 V, on surface/recess, complete with tinned copper busbar, neutral busbar, earthbar, DIN bar, interconnections, powder painted including earthing etc. as required (but without MCB/RCCB/Isolator). 6-way double door.

125

1891

236375

... More
Providing and fixing following capacity TP&N disconnector main switch unit inside the existing panel board with ISI marked HRC fuses, including drilling holes in cubicle panel, making connections etc. as required. 63 A TPN

14

2737

38318

... More
Providing and fixing following capacity TP&N disconnector main switch unit inside the existing panel board with ISI marked HRC fuses, including drilling holes in cubicle panel, making connections etc. as required. 32 A TPN.

125

1871

233875

... More
Earthing with G.I. earth plate 600 mm × 600 mm × 6 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/coke and salt as required.

84

6340

532560

... More
Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed steel conduit as required. 3 × 2.5

3300

119

392700

... More
Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed steel conduit as required. 3 × 1.5

5350

82

438700

... More
Supplying and fixing brass batten/angle holder, including connection etc. as required.

800

107

85600

... More
Supplying and fixing 3-pin, 5A ceiling rose on the existing junction box/wooden block, including connections etc. as required.

600

70

42000

... More
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box, including connections but excluding modular plate etc. as required.

450

316

142200

... More
Total impact of GST for the purpose of CTC

1

-

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.