Building Construction Department Tender

S.I.T.C. of Stage Wings made out of 50mm x 25mm x 16 M.S. pipe frame. Fixed with Black Glazed Cotton Cloth both side

S.I.T.C of Side Ladders for mounting stage luminaries made of 50x25mm, 16G MS tubes welded in required size with Clamps

50 mm M.S. Pipe dia B class pipe to be provided to be hang from exiting grid of roof structure for top and FOH lights bar Make- Custom Fixed bar

S.I.T.C. of 1000W, 240Volt, PAR Light sealed Beam Light with CRC Sheet Metal and aluminum die casting, mat black color, yoke & clamp Type: Modern-64 etc. complete with installation as per the site requirement.

54x3W LED Par Light 3 in 1 54x3W LED Par Light 3 in 1 Beam Angle 15* Complete with RGBW 3W lamp source x 54 Pcs, DMX 512 dimming with 7 channel, Powder coated Black finish housing, IP20 protection having Sound Control & Master Slave Auto Run Mode. illuminate the indoor stage with unlimited colour effects. Make: ASL

150W LED profilespot 19 degree light 300 w LED profile spot Halogen Profile lighting consisting of 2nos.150mm dia PClenses, fireproof sockets, ellipsoidal anodized aluminum reflector,1000W halogen BipinT-11lamp, yoke color frame &suitable clamp etc

GI Pipe Grid over the stage for supporting stage equipment in position 50mm dia GI pipe grid with welded connection, suspended from ceiling structure/ slab by MS flat suspenders with expansion fasteners, center to center distance (1 Mtr - 1.2 Mtr), fixed to wall/beam support with MS plate with expansion fasteners etc. painted black with 2 coats of paint and coat of primer. Size: 40'x20' Make/Model: Customized

S.I.T.C of 1000W Halogen Fresnel light consisting of 1000W Halogen Bipin T-11lamp, 150mm dia imported Fresnel lens, high temperature socket, and yoke color frame & suitable clamp.

S.I.T.C. of 500W Halogen light with mash & barn door consisting of 2nos. Single contact compressible holder, yoke, 500W halogen tube & suitable clamp Type: HL-44 etc. complete with installation as per the site requirement.

Cyclorama (I8X4INI LED WALL WASHER LIGHT IP65) Light Source: 18 PCS 12W 4 IN 1 LEDs, Lens angle: 250 (300,450,600,Optional) Channel mode: 3/4/6/7/9 DMX channel mode 0-100% linear dimmer Function: color mix, automatic color change, built-in program and strobe effect with adjustable speed. Sound controlled via built-in Microphone Adjustable sound sensitivity LED Display, easy to control Control: auto, sound active, DMX512, software(connecttocomputer)Overheating protection Voltage: 100-220V,50/60hzPower: 230W IP Rating: IP65

1000W Halogen Planoconvex spotlight complete 1000W HalogenBipinT-11lamp, spherical anodized reflector, fineproof socket, 150mm‘dia Planoconvexlens, bottom sliding knobs,yoke, colorframe & suitable clamp, Type:SL-35H etc. complete with installation as per the site requirement.

Light Point Wiring from Patch panel/ Distribution Board to be provided near stage to various stage light fixtures with 2.5sq.mm 3core PVC Insulated and PVC sheathed Cable (ISI Mark) including cable tray of suitable size for laying these wires on the tray including 20amps metallic clad sockets / 15amp socket to direct points with box at top.Make/Model : Polycab / Kalinga / Anchor

DMX Splitter Supply and fixing of 1 in 8 Out DMX Splitter. Make: Deftech

Control PanelDMX controlled Deskwith2048 DMX channels to control dimmers and intelligentlights. 4x512channels. 4 upto isolated output interface, Control 240 intelligentlights, with upto40channelseach.Large screen displays all operations, changes and output.Knobs very easy to use interface with multiple sliders and direct access buttons. The key board can be locked independently to avoid incorrect operation.World famous light library set internally is convenient to use. Several fixed internal programs for special effect can provide changeable effect in live.Save data in live modeon USB memorizer. Specialized goose neck light provides smooth control to the panel. Specialized fly case makes transportation and performance more safe and convenient Make/model: Stone 2010

C clamp for light hanging

Interconection of signal cable with XLR conector

4 core 1.5 sqmm electrical cable for curtain control from control room

Smoke MachineVoltage:AC11060HZor220-240V50Hz Power Consumption: 1500WPre-heatingtime:4-6min Liquid Capacity:1.2 liters Smoke Output: 15000cuft/min Controlmode: TimerOutput Control, WirelessRemotecontrol&DMX-512, Channel:1 channel NetWeight:4.2kg Product Size: 37×20.5x25cm

Dimmer 12CH × 4KW Electronic Dimmer with Dual DMX signals input and can work simultaneously, Fade accuracy:4096(16bit), Integrativedesign, lightweight, easyformaintenance, Independent dimming, Soft and hard patch for optional, user-friendly interface, Response time:quick, normal or slow, helping prolong lamp's life, run both manually and automatically, Status selectable when no DMX signal, 3 working modes for each channel:normal,fix and switch, 5User-selectable curves:linear, square, s-curve, extraction or user-defined, Very low interference, Overload and Neutral-lost warning system force to limit output, Each dimmer out put can be set as range of 110 to 250 V AC; Technical parameter, Voltage: 160Vac~240Vac, Frequency:45Hz~65Hz, Auto voltage compensation:effective with a 10% voltage variation input, output variation1%, Power Consumption: 60W, Output: 4KW for 24 channel, Signal: DMX-512

Providing, fixing, testing and Commissioning of cross connecting panel 72way having 72nos. 4mm sheathed sockets fitted on the panel for interchanging the light circuits with the dimmers as desired, connections with patch cords having 4mm sheathed banana plugs at both the ends with 1mtr. Super flexible cable of 40 SWG. The patch panel shall have neutral & earth bar connection strip and complete in all respects as required.

WOODEN WALL PANEL Providing and Fixing Armstrong Channeled Woodworks perforated panels of width 192mm, thickness of 15mm and length 2400 mm or as required by the Architect/ approving engineer, made of a Moisture Resistant fibre board with minimum 595 Kg/M3 density substrate with a laminated facing as per the approved shade & finish and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the visible surface has a “Helmholtz” fluted perforation of 3mm width and 13mm of visible panel each. The edges of the panels shall be “tongue-and-grooved” to receive special clips for installation. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece having NRC of 0.59. The panels shall be mounted on special aluminium splines (keel) using clips provided by Armstrong and approved As per building specification and direction of E/I 1 x 16m x 6.1M = 97.6 m2 1 x 5m x 4m = 50m2 2x 20.24m x 4.5m(av) = 182.16x50% = 91.08m2 2 x 8.35m x 3m = 50.10m2 x 50% = 25.05m2 1 x 16.61m x 3m = 49.83m2 x 50% = 24.91m2 (a) 288.64m2 Deduction- (-) 12 x 1.82 x 1.21 = 26.42m2 3 x 2.13 x1.82 = 11.62m2 (b) 38.04m2 Net A- B = 250.60m2

INSTALLATION: Install wooden battens (provided by others) of section 50x50mm or as approved by the Architect on the solid wall horizontally using screws and plugs at spacing of 600mm centre-to centre. Screw the aluminium extruded keel for channelled woodworks provided by Armstrong over the lowest and second wooden batten at an on-centre distance of 600mm. Install the Skirting (provided by others) of width 50mm or more as required by the Architect/ Engineer-in-Charge and insert the tongue end of the panel in the skirting. Place the inside clip on the groove end of the panel along the Al keel and then place the tongue end of the next panel. Continue installing rows of panels by inserting the tongue into the groove of the earlier inserted panel and progressively installing inside clips into the next keel till the actual height is achieved. Finish off the edges using wooden moulding of matching colour (provided by others). Installation to be carried out by Armstrong Trained Installation team & Installation should be carried out as per Armstrong recommended procedure.

OPTRA WALL PANEL Providing and supplying Armstrong ‘Optra Acoustical Wall Paneling’ with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and classified for Fire reaction Class A as per ASTM E-84, fabric with an option of colors – Husk, Copper, Sangria, Sesame, Coffee, Charcoal, Titanium, Flame, Peanut & Shell as per the choice of the Architect of size 600X600 mm providing a minimum sound absorption level of 0.85 NRC to be affixed to wall using Wall panel impalers supplied by M/s Armstrong Industries India Pvt. Ltd and construction adhesives as per the instructions laid down by the manufacturer. 2x 20.24m x 4.5m(av) = 182.16x50% = 91.08m2 2 x 8.35m x 3m = 50.10m2 x 50% = 25.05m2 1 x 16.61m x 3m = 49.83m2 x 50% = 24.91m2 Deduction = (-)38.04 m2 103.00m2

INSTALLATION: 4nos. Armstrong wall panel Impalers of shall be fixed to the wall surface using self-tapping screws. Silica based construction adhesive to be dabbed on to the projecting elements (spikes) of the impalers. Armstrong Optra wall panels shall be pierced through the spikes of the impalers ensuring the line and level of the panels are maintained. Installation to be carried out by Armstrong Trained Installation team & Installation should be carried out as per Armstrong recommended procedure. As per building specification and direction of E/I

WOODEN CEILING Providing & Fixing of Armstrong Wooden finished Suspended Ceiling System with Woodworks Microlook edge tiles with Armstrong 15mm Silhouette B/R exposed grid. The Tile in RG3003 (RG3) perforations with approved laminate (Portland Maple, Sea Beech, Siam Wood & Mystique Walnut) finish would have an NRC of 0.42, Humidity Resistance (RH) of 70% in module size of 600mm x 600mm x 18mm and density of 725 Kgs/M3. The tile shall be laid on Armstrong Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 45mm and a load carrying capacity of minimum 15.68 Kgs/M2. Silhouette, Main Runners & Cross Tees to have mitred ends & “birds mouth” notches to provide mitred cruciform junctions. The T Sections have a Galvanizing of 120 grams per M2 & passed through 500 hrs of Salt test. 2x 20.24m x 8.33m2 = 337.19m2 1 x 16.61m x 20.24m = 336.18m2 673.37m2 x 20% = 134.67m2

INSTALLATION: To comprise main runner spaced at 1200mm centers securely fixed to the structural soffit using Armstrong suspension system (specifications below) at 1200mm maximum centre. The First/Last Armstrong suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be Armstrong wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum centers. As per building specification and direction of E/I

OPTRA CEILING OPTRA WHITE 600X1200MM MICROLOOK WITH SILHOUETTE PROFILE GRIDS Providing & Fixing of Armstrong Soft Fibre Acoustical Suspended Ceiling System with Optra (Bevelled Tegular) Edge Tiles With Armstrong 15mmExposed Grid. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance ≥85%, , Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 1200 x 20mm , suitable for Green Building application, with Recycled content of 66% GW & 74% RW. The tile shall be laid on Armstrong Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 38mm. Silhouette, Main Runners & Cross Tees to have mitred ends & “birdsmouth” notches to provide mitred cruciform junctions and a load carrying capacity of 14.29Kgs/M2 with a minimum pull out strength of 100 kgs. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system of Armstrong make 2x 20.24m x 8.33m2 = 337.19m2 1 x 16.61m x 20.24m = 336.18m2 673.37m2 x 60% = 404.02m2

INSTALLATION:To comprise main runner spaced at 1200mm centres securely fixed to the structural soffit using Armstrong suspension system (specifications below) at 1200mm maximum centre. The First/Last Armstrong suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. Perimeter trim to be Armstrong wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum centres. Installation to be carried out by Armstrong Trained Installation team & Installation should be carried out as per Armstrong recommended procedure. As per building specification and direction of E/I

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :

CHAIR REPARING WORK- Seat construction : The seat panel shall be 5/8” thick, electronically glued curved with CRC sheet panel. The padding material shall be 4” thick polyurethane foam, shall be glued to the inner surface of the seat panel. The outside surface of the seat.

Providing fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS : 8183, density 24kg / m3, 50mm thick, wrapped in 200 G Virgin Polythene bags, fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling of building.

Carpet-supply and fixing wall to wall carpet nylon carpets design/plainquality/gsm-1200 foaming beneath carpet-500 foaming quality/size 80ft/80ft sqft(as per measurement)

Fabricating and fixing on the Stage Proscenium to be fabricated out of tubular framework of GI frame section at 600mm c/c both ways; fixing including finishing with 2 gypsm board on either side.Make: Make: Deftech and others.

Stage Wooden Flooring : - Providing & fixing of 8 mm laminate flooring. (Make Vito Flooring, Hornitex,lamiwood)

L Profile MAKE –Detech ,lamiwood

Profile Make –Deftech ,lamiwood

Round Profile Make –Deftech ,lamiwood

FOH Speakers: Elements: 12" woofer + 3" comp. driver.; Power handling (8 ohm): 500 W. Sensitivity: 97 dB. ;Dispersion (HxV): 80° x 50° Frequency response: 60 Hz -16 kHz (-3 dB). Input connector: XLN 4 x 2.

Surround speaker: Type: Trapezoidal loudspeaker. Elements: 2 x 8" woofer + 1.35" TWT. Max power handling: 500 W.

Subwoofers: Configuration: 18" woofer Type of radiation: Direct radiation (bass reflex) Power (RMS): 600W; Power (peak): 2400W

Mounting /hanging arrangement for Speakers

Green rooms & Control room: 5" & TWT. 100V (16W). 40W (8 ohm) Wall Mount Speaker Black color

Amplifier for FOH Speaker & Surround speakers; 8 ohm stereo output power : 310 W x 2.

24 Channel Mixer with 16 Mic/24 Line Inputs, 4 Stereo Line Inputs, 6 Aux Outputs

DSP: 4-input, 8-output Ethernet DSP. Control via Ethernet and RS232. 110dB dynamic range. 48KHz / 24bit sampling. 108dB S/N ratio. Process functions in inputs and outputs: expander, noise gate, crossover, parametric equalizer, delay, compressor, gain, mute. Routing and matrix mixing of the 4 inputs in the 8 outputs independently. Balanced inputs and outputs.

Wireless Handheld Mic: Professional Diversity 2-channel wireless system in UHF band. *Frequency range: 610 - 640 MHz *IR synchronism between receiver and microphones. *LCD display with AF, RF, gain and frequency information.

Wireless lapel mic: *Professional Diversity 2-channel wireless system in UHF band. *Frequency range: 610 - 640 MHz *IR synchronism between receiver and microphones. *LCD display with AF, RF, gain and frequency information.

Podium Gooseneck Mic With Base: Gooseneck microphone. Indication light. Cardioid Elements: Electret condenser.; Polar pattern: Unidirectional + Cardioid.;

Wired Handheld vocal Microphone

Wired Handheld Instrument Microphone

Microphone stand (Long)

Microphone stand (Short)

Junction Box : Four point Junction box with one speakon connector.

Connectors: UL Listed Connectors. Make : MX / Neutrik

Loudspeaker Cable : 2 core 2.5 sq mm PVC insulated Cu conduction loudspeaker cable.

Microphone Cable: 2 core shielded PVC insulated Cu conduction microphone cable.

Rack: Equipment Rack for housing all rack mountable equipments with internal wiring, front glass door; heat dessipation fans; movement wheels, power distribution units etc.

upto 246' height adjustable ceiling mounting kit

MPTP-T70-WPT is a 2 gang Decora style wall-mountable HDBaseT transmitter for HDMI or VGA/audio and RS232 at 230ft (70m)

Transmitter & Receiver set

VS211H2 is a highperformance auto switcher for 4K@60Hz (4:4:4) HDMI video signals. Offering priority and lastconnected auto switching scheme options, it automatically switches input signals to output connection, according to the selected switching scheme, and based on active video signals detection

Cables & connectors (01 Lot) Make : Bestnet/ Kramer / Purelink

SFTP cable Make : Dlink / Bestnet / kramer

Cleaning with a linen/ absorbent cloth Soaked in sodium hypochlorite/ sanitizer/bleach/alcohol or suitable chemical. Chemicals used by the agency be purchase from reputed concern supplier and should be isi marked or WHO approved .

Add 18 % GST

Add 1% Labour Cess