Building Construction Department Tender

Taking down chowkhat in doors including stacking serviceable materials within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l.

Taking down chowkhat in windows including stacking serviceable materials within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l.

Easing and adjusting door and window shutters with chowkhats in old work complete as per specification and direction of E/l.

Dismantling old plaster and pointing in cement or lime and raking out joints to 15 mm. depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/l.

Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/l.

Providing and laying 6mm thick mosaic flooring of approved texture and colour over 25 mm thick P.C.C. (1:2:4) base with 10 mm down stone chips and sand of F.M. 2.5 to 3 rubbed and polished to granolilthic finish with approved quality of carborandum stone, top layer of 6 mm. being laid with 4 mm and down marble chips of approved quality and shade in ratio (1:2) cement and marble dust mixed in ratio of (3:1) by weight of marble chips including casting in approved block, curing, taxes and royalty all complete as per building specification and direction of E/l.

(a) With 100% ordinary cement with Dehradun marble chips & Daltonganj marble dust

Providing and laying 6mm thick mosaic in skirting , dado, steps and pillars of approved texture and colour over 12mm thick cement plaster (1:3) base with sand of F.M. 1.5 rubbed and polished to granolithic finish with approved quality of carborandum stone top layer of 6mm being laid with 4mm and down marble chips of approved quality and shade in ratio (1:2) cement and marble dust mixed in ratio (3:1) by weight of marble chips including cost of curing, royalty and taxes all complete as per building specification and direction of E/l.

(a) With 100% ordinary cement with Dehradun marble chips & Daltonganj marble dust

Labour for cutting old mosaic or precast terrazo tiles including cost of removing dirt, rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/l.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to Is 15622 thickness to be specified by the manufacturer) of approved make in all colours,shades except burgundy,bottle green,black of any sizie as approved by E/I ,in skirting,risers of steps and dadoes over 12mm thick bed of cement mortar 1:3(1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including kpointing in white cement mixed with pigment of matching shade all complete job.

Providing and laying ceramic glazed floor tiles300x300mm (thickness to be specified by the manufacturer) of Ist quality conforming to IS:15622 of approved make in colours such as white,Ivory,Grey,Fume,Red Brown ,laid on 20mm thick bed of cement mortar 1:4(f1cement:4 coarse sand) including pointing the joints with white cement and matching pigment etc.. complete. job as per direction of E/I

Providing fixing pressed steel door frame conferming to IS:4351 manufactured from commercial mild steel sheet of 1.25mm thickness including hinges,jamb,lock jamb,bead and if required angle threshold of mild steel angle section 50x25mm or base tiles of 1.25 mm pressed mild steel welded or rigidly fixed together by mechanical means adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards,lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as direction of E/I. Profile-B

Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush shutters in doors and windows with black board core blended with high quality phenol formal dehyde synthetic resin both side commercial veneered of standard make with oxidised iron fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/l.

Supplying, fitting and fixing 35mm thick solid core type non-decorative double leaf flush shutters in doors and windows with black board core blended with high quality phenol formal dehyde synthetic resin both side commercial veneered of standard make with oxidised iron fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/l.

Supplying, fitting and fixing fully glazed steel door, windows or ventilations of standard rolled 'Z' and mullion steel sections and size as per IS-1038 joints met and welded with 100x16x3mm M.S. lugs fixed in cement concrete (1:2:4) blocks 15x10x10 cm size including cost of oxidised iron fittings, with hinges, handle per steps, catch springs, 3mm thick plain glass panes with Aluminimum beads and inner frame fixed with lugs with 20mm long 6.3mm G.I. counter sunk machine screw and nuts and applying a coat of red lead paint carriage to work site hoisting and placing in position in all storys and taxes all complete as per building specification and direction of E/l.

Providing and applying white cement based birla putty of average thickness 1mm of approved brand for making smooth surface including all complete job as per direction of E/I.

Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding, washing of floors and taxes all complete as per building specification and direction of E/l.

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm)

Providing two coats of synthetic enamel paint over a coat of primer of approved shade and make over new wooden surface after cleaning, removing dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specification and direction of E/l.

Providing two coats of synthetic enamel paint of approved shade and make over old wooden surface including cleaning the surface after removing dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specification and direction of E/l.

Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direcition of E/l.

Providing 250mm. wide brick drain in cement mortar (1:6) with av. 250mm. clear depth and 250mm. apron including cost of earthwork involved with 75 mm. Cement concrete (1:4:8) over one brick designation 75A flat soling in proper grade and slope at the base, the drain duly plastered in C.M.(1:3) with punning over exposed surface all complete as per building specification and direction of E/l.

Making plinth protection with bricks of class designation 75 laid on edge in cement mortar 1.6 (1 cement : 6 coarse sand) with 12 mm thick bed of cement mortar 1:6 (1 cement : 6 coarse sand) over 75mm bed of dry brick aggregate 40mm nominal size rammed, consolidated and grouted with fine sand and the top of bricks pointed with cement mortar 1:3 (1 cement : 3 fine sand) :

water proofing for old and new roof slab providing and laying water proofing treatment on roof slab by applying two component factory designed ready to use acrylic modified flexible materials appled with brush,rooler or spray for water proofing coating as per manufacturer specification with following ites. (a) surface preparation-providing and cleaning of concrete surface to remove dust oil grease including removal of existing loose paint/coating and cement laidtrance by clelaning with compressed air & water jet including all materials,labour,tools complete .Pending test to be done after plugging all outlets and to be chocked from solift to identiify secapagae,-do- admixture of sika India Pvt Ltd/Myk schomberg/Dr.Fixt/-do-(b) Ist coat -Applying Ist coat of two component acrrylic modified ready to use,flexible component materials on surface saturated dry roof and side wall of parapet wall upto 600mm by brush or roller after Ist coat of application.45garm of Fibre glass cloth to lay when the first layer is still green Ist coat shouyld be applied @ 1.5kg/sqm/coat for the purpose of measurment the entire treataed surface will be measured(c) 2nd coat-to apply the 2nd coat of two component acrylic modified ready to use,flexible cementious materials right angle to the Ist coat over the glass fibre laid surface,2nd coat shoud be applied @ 0.7kg/sqm/coat For the purpose of measurment the entire trealled surface will be measured After three days of drying the 2 nd coat,the rain water outlots to be plugged and ponding test to be done for 48 hours to dentify seepage leakaage from solift and if found necessaory rectification to be done as per of E/C The water proof coating to be protected from damage before screed over it wataerproofing Brand sika Topseal /Foaroc Brush band RFX/Dr.Fixit pidiffin 2K/MYk Aquain TG. Product performance/chemical Base part A acrylic copolmet ,part B specially graded cementitious pwoder/Density 1.6kg(mixed density) at +27°C/tensila strength 2N/mm2 after 25 days (with Fibre cloth)(According to ASTM D23770) pulout Bond strength 2N/mm2(Concrete failure)(According to ISO4624) slant snear Bond strength -4N/mm2(Accoording to FIP 5.15)(d) pratectionof treated surface with P.C.c-The treated surface should be covered with25mm/50gam PCC of M20 grade(1:1.5:3) with proper slope(1:120) towards the rain outlets in alltrnatepanels of 2mtx2mt keeping 6mm gap between the panel joint-integral water proofing admixture conforming to IS 26462of 100ml per bag of of cement to be added in the scraed concretepaid separtely for this items deep and big fent.All corners shall be chaainfeted with150mmx150mm fillete.The rinfowater outliets of water the peripheral graps betwen PVC pipe outlet and concrete surface should be packed properly with rich concrete and the peeripheral mouth to be sealed with moisture insansitivie epoxy putty of sika India Pvt Ltd/(MYK schormbarg/Dr Fixit/Fosroc for the purpose of measurment the entire treated surface will be measured(e) Groove of PCC surface should be filled with polysulphide sealant paid separataly.Brand sika India Pvt Ltd/MYK schomberg/Dr Fixit/Fosioc.

Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5with 5% cico or any other approved water proofing compoundincluding taxes and royalty all complete as per building specification and direction of E/l.

Providing and fixing male ended 15 mm dia brass bib cock of approved quality ( wt not less than 350 gms ) with extra socket all complete as per specification and direction of E/l .

Providing and fixing 15mm size C.Pbrass pillar cock(weight not less than 350gms)C.I.body brass spindle pillar cock of approved quality as per specification and direction of E/I

C.I.body brass spindle

Providing and fixing G.M. non return valve Horizontal / vertical type of approved quality as per specification and direction of E/l.

(A) Horizontal non return valve

32mm dia

(B) Vertical non return valve

32mm dia

25mm dia

Providing and fixing N.P/C.P brass/P.V.C porcelain shower rose of 15mm inlet etc. all complete as per specification and direction of E/l

(A) C.P. SHOWER

(b) 125 mm dia.

Cutting chajja or concrete for laying G.I pipe and restoring the same with R.C.C (1:2:4) brick work in cement mortar (1:4) and cement plaster (1:4) as per specification and direction of E/l.

Making holes in walls for laying G.I pipes and restoring the same after pipe laying as per specification and direction of E/l

(a) 125 mm thick wall.

(b) 250 mm thick wall.

Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/l.

(a) Glass shelf with C.P brass rail (450mmx125mm)

2) 450x125mm

(2) Mirror 450x300 mm

( c) C.P brass towel rail 20 mm x 600 mm with bracket container

(2) C.P brass shop dish container medium quality with screw and hinges etc.

Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of Parry Hindustan or any other I.S.S. approved make with 100 mm H.C.I., "p" trap 15 litres C.I.. or C. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32 mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I. body brass spindle stop cock of weight not less than 50 grms. 15 mm P.V.C. connection pipe 450 mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l.

(a) 580mm longwith 12.5 lit. low level P.V.C. cistern

Supplying, fitting and fixing flat back or angular, lipped front viterous white glazed earthenware urinal of "Hindustan" " Parry" or any other approved I.S.S. make with all fittings with C.I. or R.S. brackets, standard size G.I. flush pipe with fitting clamps, 15 mm C.I. body brass spindle stop cock of approved quality weight not less than 400 grms. , 15 mm P.V.C. alkathene pipe 450 mm long with brass coupling at both ends and doing plumber joints including painting of exposed part with 2 coats of approved paint over a priming coat of red oxide, cutting wall and floor, making good the same etc. all complete as per specification and direction of E/l.

(A) Flat back or standing corner ( 450 mm x 350 mm )

Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed c.l. or R.S. brackets 32m C.I. brass waste 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grms., 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/l.

Earth work in excavation for laying of different types and sizes of R.C.C. spun pipes with disposal of excavated earth within initial lead and lift as per specification and direction of E/l.

(a) For classification of soil item- A

Labour for laying fitting and fixing NP2 R.C.C.spun pipe with colars in lines,level and grade and providing approved jointing materials and joints properly filled to make them leak proof including providing sight rails,bonning rod,night guard ,Red light and barrier etc all complete as per specification and direction of E/I.

15mm dia R.C.C.spun pipe

Supplying materials and labours for constructing inspection chamber of designation class 75 B bricks size 750 mm deep, 600 x 450 internal dimension having 250 mm wall thickness in cement mortar ( 1:6 ) including 12 mm cement plaster ( 1:4 ) with punning on inside and cement plaster (1:6 ) with 600 x 475 mm G.I. cover with frame (Weight not less than 36 Kg.) in foundation and refilling all complete as per specification and direction of E/l.

Supply of NP2 R.C.C.Hume pipe with collar as per I.S.s.458-1971 grade including all taxes and duties all complete job.150mm dia

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion(i)single socketed pipes.

110mm diameter

Providing and fixing PVC pipe fitting including all complete job.

single tee with door110x110x100mm

single tee without door 110x110x110mm

1100 band

Providing and fixing stainless steel A ISI 304(18/8) kitchn sink with drain board as per IS 13983 with C.I. brackets and stainless steel plug 40mm including painting of fittings and brackets ,cutting and making good the walls wherever required(610x460x200mm)

Providing and fixing Chlorinated polyvinyl chloride (CPVC)pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i.e. fixing the pipe with clamps at 1.m.spacing.This included jointing of the pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. concealed work including cutting chases and making good the walls etc.(Internal work) exposed wall

25mm nominal outer dia pipes

32mm dianominal outer dia pipes

Providing and fixing Chlorinated polyvinyl chloride (CPVC)pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i.e. fixing the pipe with clamps at 1.m.spacing.This included jointing of the pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. concealed work including cutting chases and making good the walls etc.(Internal work)

15mm nominal outer dia pipes

20mm dianominal outer dia pipes

Providing and placing on terrace(at all floor levels) polyethylene water storage tank ISI 12701 marketed with cover and suitable locking arrangement and making necessary holes for inlet ,outlet and overflow pipes but without fillings and the base supported for tank.

Providing and fixingPTMT Grating of appoved quality and colour

C.P.Gratings circular type-100 mm dia

C.P.Gratings circular type-125 mm dia

Making soak pit 2.5m diameter 3.0metre deep with 45x45cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100mm diameter,1.8m long complete as per standard design .with F.P..S.Bricks.

Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l.

Extra for earthwork in hard soil as per specification and direction of E/l (vide classification of soil item-B)

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including' cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement compacted volume).

Providing designation 75 B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.

Providing P.C.C.M - 150 with nominal mix of (1:2:4) in foundation with approved quality of stone chips 20 mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/l.

Providing R.C.C.M - 200 with nominal mix of (1:1:5:3) in lintel with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/l.

Providing R.C.C.M - 200 with nominal mix of (1:1:5:3) in roof slab with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/l.

Providing tor steel reinforcement of 8mm. dia. rods as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. ( Taking 8mm TMT Coil Fe 415 Rates in lew of 6mm coil)

(a) 12mm .TMT Fe 500 (only valid for sail & TATA steel)

Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l.

Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/l.

Carriage of materials from nearest approved sources of supply including loading into trucks and unloading from trucks and stacking properly at work site as directed by the E/I.

sand lead 8K.M.

chips lead 22K.M.

Brick lead 8K.M(1K+7P)

local sand lead 3K.M

Stone Metal 20 km lead

Wiring for light/fan point/exhaust fan point/call bell Point with 1.5 sq.mm FRPVC insulated copper Conductor single core cable in surface/recessed PVC conduct with conduit With pino type switch phenolic laminated sheet Suitable size PVC/G.I Box etc. as required.

Group A

Twin control point wiring in PVC conduit with piano type switch-wiring for Twin control light point with 1.5sqmm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit 2 way paino type switch,phenolic laminated sheet,suitable size PVC/G.I.box etc as required.

Wiring for light / Power plug with 2×4 sq mm FRPVC in insulated copper conductor single core cable in surface / recessed PVC conduit along with 1 nos 4 sqmm. FR PVC insulated copper conductor single core cable for loop earthing as required .

Wiring for circuit/submain wiring along with wiring with the following sizes PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required.

2x1.5sqmm+1x1.5sqmm earth wire for circuit.

2x2.5sqmm+1x2.5sqmm earth wire for 5 Amp socket)

4x6sqmm+2x6sqmm earth wire

S/F piano type switch/socket-Supplying and fixing following pianotype switch/socket on the existing switch box/cover including connections etc as requried.

5/6 amps,one way switch

3pin 5/6 amps,socket outlet

Electronic step fan regulator,deluxe

S/F Suitable size G.I.Box on surface/Recess with suitable size ofr phenolic laminated sheet cover in front including providing 3pin 5/6 Amp socket outlet and 5/6 amp. Piano type switch connection as painting etc. as req.

S/F Suitable size G.I./PVC Box on surface/Recess with suitable size ofr phenolic laminated sheet cover in front including providing 6 pin 15/16 Amp socket outlet and 15/16 amp. Piano type switch connection as painting etc. as req.

S/F 3 Pin 5 Amp ceiling rose on the existing junction Box wooden block incuidng connection etc as reqd

S/F Brass batton / Angle Holder including connection etc as reqd

S/F call bell buzzer-Supplying and fixing call bell/buzzer suitable for D.C/A.C.single phase 230 volts,complete as required.

I.T.C of ceiling fan including wiring the down rods of standard length(up to30cm) with 1.5 sqmFRPVC with1.5sqmmFRPVCinsulated copper conductor single core cable etc as reqd.

I.T.C.of exhaust Fan up to 450mm sweep in the existing 0pening including making the hole to suit the size of the above fan making good the damage connection testing commissioning etc. as reqd.

Supplying and fixing following way,three pole land netural,sheet MCB ditribution board,415 volts,on surface/recess,commplete with tinned copper busbar,netural busbar,earth bar din bar,detechable gland plate,interconnections,phosphatized and powder painted including earthing etc as required(But without MCB/RCCB/ISOLATOR)

4way (4+12),single door Horizontal type

S/F"B” series SPMCB: supplying and fixing 240 volts C series ,miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections ,testing and commissioning etc as required.

6/32 a single pole

S/F Followign rating 4 pole 415 Volts isolator in the existing MCD DB complete with connection testing and commissioning etc as reqd

40 Amp

63Amp

supply of 1200mm A.C.ceiling Fan Baja/cromption or any other approved make etc without regulator.and fittings as required Make Havells/khaitan/crompton

Supplying of LED street light(45/48W) including all complete jobb.

supply of 12"exhaust fan in with double ball bearing existing opening and fittings as required Make Havells/khaitan/crompton

S/F/F-18/20 wall CFL Lamp make Bajaj/HPL/JUVAS/BENTEC/HAVELLS/POLYCAB/JAGUAR/SURYA/PHILIPS/CROMPTON GREAVE ETC including all complete job.

S/F of 2 amp DP switch flush type including all complete job.

Supplying and fixing single wall mountaed 20/22 watt LED tyype batten fitting complete with electronic driver and LED tube etc direrctly on wall/ceiling including connection with 1.5 sqmm FR PVC insulated copper conductor and earthing the bodyetc as required.

Add 12 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)