Building Construction Department Tender
Search from across the categories, cities, and authorities to find the latest Jharkhand tenders. Every Jharkhand tender is curated from credible sources of government websites (eProcurement Jharkhand portal) and newspapers, thus ensuring the credibility of the information presented to you. For more information on Jharkhand tender bidder registration, the login process and more read the FAQs section on this page.
Costs
EMD
₹ 4,94,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_BCD_37105_1Bid Award Id
ViewTender No
BCD/CE/60/Ranchi Div No-1 Ranchi /2018-19Tender Authority
Building Construction Department ViewPurchaser Address
-Website
http://http://www.bcd.bih.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including' cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement complacted volume).
1.4794370477631147
-
-
... More
Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l.
12.546468401486988
-
-
... More
Providing P.C.C. M - 75 with nominal mix of (1:4:8) in foundation with approved quality of stone chips 20 mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/l.
1.274
-
-
... More
Providing designation 75 B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.
17.6854227175651
-
-
... More
Brick work with common burnt clay modular bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand).
Above plinth level upto floor V level
3.375
-
-
... More
Providing P.C.C. M - 100 with nominal mix of (1:3:6) in foundation with approved quality of stone metal grade-III( 50 mm to 25 mm size) graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/l.
0.8362605848201641
-
-
... More
Providing R.C.C. M - 200 with nominal mix of (1:1½:3) in beam of all types with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/l.
0.965
-
-
... More
Providing RCC M-200 with nominal mix of (1:1.5:3) in roof slab with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer, placing in position vibrating striking curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I.
0.93
-
-
... More
Providing precast R.C.C.M - 200 with nominal mix of (1:1½:3) slab of desired size with approved quality of stone chips and clean coarse sand of F.M. 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/l.
1.8662174430128844
-
-
... More
Providing Tor steel reinforcement of 8mm. dia. rods as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. TMT Fe 500 ( Only valid for SAIL / TATA steel )
0.1507
-
-
... More
Providing Tor steel reinforcement of 10mm. ,12mm & 16mm dia. bars as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l.
0.1386
-
-
... More
Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.
10.906412639405206
-
-
... More
Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.
1217.961575
-
-
... More
Providing 1.5mm cement punning including curing carriage of water with all leads and lifts as per building specification and direction of E/I.
10.906412639405206
-
-
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
10728.2846
-
-
... More
Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth , carriage of grill to work site, hoisting as per building specification and direction of E/l. (where materials is not supplied by the dept.)
1110.3381
-
-
... More
Providing and laying vitrified Parking / Industrial tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 4457:2007 of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm. including grouting the joints with white cement and matching pigments etc.,
complete. Size of Tile300x300x10 mm sizes.
233.896725
-
-
... More
Providing primer one coat of red lead paint ofapproved make over steel surface including preparing the surface after cleaning removing dirt, scales, grease and sand papering, including cost of scaffolding etc. all complete as per building specification direction of E/I.
341.64169999999996
-
-
... More
Providing 2 coats of Synthetic Enamel Paint of approved shade and make over steel surface grills & railings including cleaning the surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I.
915.6047999999998
-
-
... More
Providing and Fixing of Toughened glass of 12 mm thickness of approved quality
35.586
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement
mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade . Area of slab over 0.50 sqm .
11.014714285714287
-
-
... More
Providing designation 75 B one brick on edge soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l.
3.7
-
-
... More
Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity 0.043 W/m K as per ASTM 518:1991,in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items
151.227725
-
-
... More
galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work
shall be carried out as per specifications, drawing and as per directions of Engineer-in-Charge.False Ceiling With 15 mm thick tegular edged light weight calcium silicate false ceiling tiles.
-
-
-
... More
Labour for laying, fitting and fixing NP2 R.C.C. Spun pipe with collars in lines, level and grade and providing zapproved jointing materials and joints properly filled to make them leak proof including providing sight rails, bonning rod, night guard, Red light and barrier etc. all complete as per specification and direction of E/I. 150mm dia R.C.C. Spun pipe upto 3.0 metre depth of invert below G.L.
60
-
-
... More
Supplying of 150 mm dia NP2 hume pipe of E/I.
60
-
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge
100 mm nominal size dia
30
-
-
... More
Supplying, filling, spreading & leveling stone boulders of size range5 cm to 20 cm, in recharge pit, in the required thickness, for allleads & lifts, all complete as per direction of Engineer-in-charge
3.3377655055225146
-
-
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to10 mm, in the recharge pit, over the existing layer of boulders, inrequired thickness, for all leads & lifts, all complete as per directionof Engineer-in-charge
3.3377655055225146
-
-
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mmto 2 mm in recharge pit, in required thickness over gravel layer, for all leads& lifts, all complete as per direction of Engineer -in-charge
3.3377655055225146
-
-
... More
Drilling in all kinds of soil and rock in rural area for installation of IM-III HP with DTH Rig including supplying all materials, labours, tools. Drilling rig, air compressor and euipment as well as fuel. Lunricants for making 125mm/115mm dia broing and cost of transporting charge of rig machined and other supporting vechicles upto work site as per direction of E/I.(a)Drilling up to 30m
30
-
-
... More
Supplying, fitting and fixing Mirrors of 6 mm thick plate glass bevelled edge mirror including C.P. brass revolving fittings 3mm ply wood board and C.P. hinges to fix with mirror. 600 X 450mm
37
-
-
... More
Supplying of Toilet paper holder with all Complite as per direction of E/I .
35
-
-
... More
Supplying of Steel jali - 100mm dia. as per direction of E/I .
35
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
-
-
-
... More
15 mm nominal bore
50
-
-
... More
20 mm nominal bore
40
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply including all
CPVC plain & brass threaded fittings This includes jointing of pipes
& fittings with one step CPVC solvent cement, trenching, refilling &
testing of joints complete as per direction of Engineer in Charge.External work
-
-
-
... More
25 mm nominal outer dia Pipes
30
-
-
... More
32 mm nominal outer dia Pipes
20
-
-
... More
40 mm nominal outer dia Pipes
15
-
-
... More
Supplying materials and labours for constructing inspection chamber of designation class 75 B bricks size 750 mm deep , 600 x 450 mm internal dimension having 250 mm wall thickness in cement mortar (1:6) including 12 mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600 x 475 mm GI cover with frame (weight not less than 36 kg) along with earth work in excavation and 80 mm thick PCC (1:3;6) in foundation and refilling all complete as per specification and direction of E/I.
14
-
-
... More
Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l.
4.77
-
-
... More
Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l.
1482.127575
-
-
... More
Taking down old door and window shutters including stacking serviceable materials within 15M. lead and disposal of unserviceable materials with all leads all complete as per direciton of E/l.
34
-
-
... More
Taking down chowkhat in windows including stacking serviceable materials within 15M. lead and disposal of unserviceable materials with all leads all complete as per direciton of E/l.
34
-
-
... More
Providing 125mm thick reinforced designation 75A brickwork in C.M. (1:4) in Superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, cost of materials, racking out joints to 15mm depth, carriage, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I.
50.586800000000004
-
-
... More
Providing and fixing tiled false ceiling of approved materials of size 595x595mm in true horizontal level, suspended on inter locking metal grid of hotdipped galvanized steel sections ( galvanized @ 120 grams/ sqm, bothside inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick(minimum) sheet, spaced at 1200 mm center to center and cross “T” ofsize 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides nclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.
97.90399999999998
-
-
... More
Providing and fixing tiled false ceiling of approved materials of size 595x595mm in true horizontal level, suspended on inter locking metal grid of hotdipped galvanized steel sections ( galvanized @ 120 grams/ sqm, bothside inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick(minimum) sheet, spaced at 1200 mm center to center and cross “T” ofsize 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers,
525.7031000000001
-
-
... More
grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing.
-
-
-
... More
Providing and fixing of Greenlam veneer over 6 mm thick water resistant , termiteproof , borer resistant and ply wood of approved quality and shade including cost of all material , labour , royalty and taxes all complete as per direction of E/I .
115.71
-
-
... More
Providing and fixing of farmica over 6 mm thick water resistant , termiteproof , borer resistant and ply wood of approved quality and shade including cost of all material , labour , royalty and taxes all complete as per direction of E/I .
103.95000000000002
-
-
... More
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.
145.148
-
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
567.3330000000001
-
-
... More
Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.
32.190917500000005
-
-
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
745.551825
-
-
... More
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
621.4868250000001
-
-
... More
Supplying, fitting and fixing good quality, well dressed and well seasoned sal wood work in roof members as pillars, plates, rafters, purlines, beams any type of batten with cost of nuts and bolts complete with cleats (with wooden checks) fitting with screws all complete as per building specification and direction of E/l.
4.1709000000000005
-
-
... More
Providing french spirit polishing over new wooden surface to give desired texture and gloss with approved make and shade of ready mixed french polish including preparing the surface after cleaning, removing dirt, scales, grease and sand papering, including cost of scaffolding and taxes all complete as per building specfication and direction of E/l.
202.05600000000004
-
-
... More
Providing wall panelling with 3.5mm thick teak veneered decorative ply wood of standard make fitted and fixed over 50 x 12mm sal wood beads at 122 mm centres properly screwed to walls including cost of spirit polishing over ply wood and 2 coats of wood preservative paint over the beads of approved shade and make all complete as per building specification and direction of E/l.( 4 mm thick ply)
241.80499999999998
-
-
... More
Providing and laying double charged vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm. including grouting the joints with white cement and matching pigments etc.,
complete. Size of Tile 600x600 mm
613.5528500000003
-
-
... More
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC rofile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion
87.70599999999999
-
-
... More
welded at all corners, includingdrilling of holes for fixing hardware's and drainage of water etc.After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof ilicon sealent over backerrod of required size and of approved quality, all complete asper approved drawing & direction of Engineer-in-Charge. Single / double glass panes, wire mesh and silicon sealant shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. 9.147D.1 Two track two panels sliding window made of (small
-
-
-
... More
Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm).
-
-
-
... More
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:
(a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)- cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:
(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.
94.5
-
-
... More
(c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment , including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealantdesign, within and all around the perimeter for holding glass.
(d) Providing and fixing in position flashings of solid aluminiumsheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it
watertight.(e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete.
-
-
-
... More
This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of
glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge.
-
-
-
... More
Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this sub- head. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves ) on the external face shall be measured in sqm. up to two decimal places.
Note:- 2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately.
-
-
-
... More
The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NBL Certified laboratories
(1) Performance Laboratory Test for Air Leakage Test (-50pa to - 300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr
(2) Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testing method for a range up to 2000 ml.
(3) Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method for a range upto 2000 ml
(4) Structural Performance Deflection and deformation by static air pressure test (1.5 times desing wind pressure without any failure) as per ASTME-330-10 testing method
for a range upto 50 mm
(5) Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for Qualitative test. Tests to be conducted on site.
(6) Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml
-
-
-
... More
Water proofing for Old and New Roof Slab :- Providing and laying water proofing treatment on roof slab by applying two Component, factory designed, ready to use, acrylic modified flexible , brush, roller or spray applied water proofing coating as per manufacturer specification with following steps :- (a)surface preparation :-Providing and cleaning of concrete surface to remove dust, oil, grease including removal of existing loose paint / coating, and cement laitance by cleaning with compressed air & water jet including all materials, labour, tools complete. Ponding test to be done after plugging all outlets and to be checked from soffit to identify seepage, leakage. On identification of seepage, cement grouting to be done with non shrink expanding admixture of Sika India Pvt.Ltd. / MYK Schomberg / Dr Fixit/Fosroc or equivallent. Providing and reparing of all corners and joints such as those between the parapet wall and the roof slab etc shall be chamfered with 150mm X 150 mm fillet of mortar (Cement: sand – 1:4) admixed with acrylic polymer of Sika/ Fosroc/MYK Schomberg/Dr Fixit or equivalent. Before chamfering a prime coat shall be given with the slurry ofacrylic polymer. Repairing surface irregularities, damaged concrete in base slab, dead cracks if any, with an acrylic polymer modified repair mortar including a coat of bonding agent of the same with cement slurry including all material, labour, tools complete.
531.654
-
-
... More
(c) 2nd Coat :-To apply the 2nd coat of two component acrylic modified, ready to use, flexible cementitious material right angle to the 1st coat over the glass fibre laid surface. 2nd coat should be applied @0.7 kg/Sqmt/coat. For the purpose of measurement the entire treated surface will be measured." After three days of drying the 2nd coat , the rail water outlets to be plugged and ponding test to be done for 48 hours to identify seepage, leakage from soffit and if found necessary rectification to be done as per satisfaction of EIC. The waterproof coating to be protected from damage before screed over it. Waterproofing Brand:-Sika Topseal 109hi / Fosroc Brushbond RFX/ Dr Fixit Pidiffin 2K / MYK Aquafin TG . Product Performance - Chemical Base Part A: Acrylic copolymer, Part B: Specially graded cementitious powder - Density 1.6 kg/l (mixed density) at +27ºC Tensile Strength ~2 N/mm2 after 28 days (with Fibre cloth) (According to ASTM D 2370) Pullout Bond Strength ~2 N/mm2 (concrete failure) (According to ISO 4624) Slant-Shear Bond Strength ~4 N/mm2 (According to FIP 5.15) Elongation at Break ~35% without Fibre Cloth and 20% with Fibre Cloth( (According to ASTM D 2370) (d) Protection of treated surface with PCC :- The treated surface should be covered with 25mm/50mm PCC of M-20 grade(1:1.5:3) with proper slope ( 1:120) towards the rain outlets in alternate panels of 2 mt x 2mt keeping 6 mm gap between the panel joint. Integral water proofing admixture conforming to IS 2645 @ of 100 ml per bag of of cement to be added in the screed concrete(paid separately for this items). All corners shall be chamfered with 150mm X 150 mm fillet. The rain water outlets shall be just leveled with the screed concrete to ensure smooth discharge of water - the peripheral gaps between pvc pipe outlet and concrete surface should be packed properly with rich concrete and the peripheral mouth to be sealed with
-
-
-
... More
moisture insensitive epoxy putty of Sika India Pvt.Ltd. / MYK Schomberg / Dr Fixit/Fosroc . For the purpose of measurement the entire treated surface will be measured." (e)Groove of PCC surface should be filled with Polysulphide Sealant.(Paid Separately). Brand - Sika India Pvt.Ltd. / MYK Schomberg / Dr Fixit/Fosroc .
-
-
-
... More
Covering of treated surface with PCC :- Providing 25 mm thick Cement Concrete M20(1:1.5:3) maintaining slope in alternate 2 mt x 2 mt panels with aaproved quality of stone chips of 20 mm to 6 mm size graded and cleaned sand of F.M 2.5 to 3 including screening,shuttering,and mixing cement concrete in mixer with admixture of integral water proofing and placing in position,striking,curing,taxexand royality all complete as per building specifiction and direction of E/I.Panels that has been left should be casted next day.There should be 6 mm gap between Panels .Brand- Sika _ Plastocrate plus,MYK proof WP10, Fosroc- Conplast X421 ic , Dr Fixit Pidiproof LW+
524.217
-
-
... More
Providing and filling of 6mm thick Groove between 25mm PCC Panels with polysulphide sealgant (poring grade) as per drawing and techincal specifications
1057.87
-
-
... More
Providing & fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS 13592 Type A including jointing with seal ring conforming to IS 5382 leaving 10mm gap for thermal expansion. Single socketed pipes. 110mm dia
85.56
-
-
... More
Providing & fixing on wall face unplasticised- PVC moulded fittings/accessories for unplasticised - Rigid PVC rain water pipes conforming to IS 13592 Type A including jointing with seal ring conforming to IS 5382 leaving 10mm gap for thermal expansion
-
-
-
... More
Bend -110 mm
16
-
-
... More
shoe -110 mm
16
-
-
... More
Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plgs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
86
-
-
... More
Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 75x65x4 mm (heavy type
191.4
-
-
... More
Providing and fixing chromium plated brass handles with necessary screws etc. complete: 125 mm
95.7
-
-
... More
Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer in- charge
127.60000000000001
-
-
... More
Providing and fixing 19 mm thick water resistant, termite-proof, borer resistant plywood
make :- greenply as Per direction of E/I .
13.494800000000001
-
-
... More
Supplying 1 carpenter as Per direction of E/I .
4.4
-
-
... More
Point Wiring in PVC Conduit, with Modular type Switch:- Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with modular type switch, modular plate, suitable size of GI box etc as required.
Group c
781
-
-
... More
Twin Control Point Wiring in PVC Conduit, with Modular type Switch (Used for stair case light):-Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in recessed PVC conduit, 2 way modular type switch, modular plate, suitable size of GI box etc as required.
58
-
-
... More
Supply and Fixing Light Plug Point with Modular Type Accessories:-
Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch, connection, painting etc as required.
190
-
-
... More
Supply and Fixing Light Plug Point with Modular Type Accessories:-Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular type switch, connection, painting etc as required.
97
-
-
... More
Power Plug Wiring in PVC conduit (2x4 sq. mm):-Wiring for light/power plug with 2x4 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit along with 1 number 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.
1387
-
-
... More
Circuit / Sub-main wiring in PVC Conduit:-Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required.
-
-
-
... More
2x1.5 Sqmm + 1x1.5 sq mm earth wire(For 5/6A Plug Points)
100
-
-
... More
2x2.5 Sqmm + 1x2.5 sq mm earth wire
30
-
-
... More
2x6 Sqmm + 1x6 sqmm earth wire (For ROOM)
20
-
-
... More
4x16 Sqmm + 2x16 sqmm earth wire (For Normal TPN DB)
10
-
-
... More
S/F VERTICAL TYPE TP MCB DB:- Supplying and fixing of following way, three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (Without MCB/RCCB/ISOLATOR). Make :- Legrand/Schneider/ Siemens.
8 Ways (8+24ways) double door
4
-
-
... More
S/F 'C' series SP MCB:-Supplying and fixing 240 volts, 'C' series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc, as required. Make- Legrand/Schneider/ Siemens.
-
-
-
... More
6/32A Single Pole
44
-
-
... More
50/63A TPN MCB
4
-
-
... More
S/F Ceiling Rose:-Supplying and fixing 2 pin ceiling rose on the existing junction box/ wooden block including connection etc as required.
37
-
-
... More
ITC Ceiling Fan:-Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (Up to 30 cm) with 1.5 sq. mm. FRPVC insulated,copper conductor,single core cable etc, as required.
33
-
-
... More
S/F Modular type electronic fan regulator:-Supplying and fixing stepped type fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required.
33
-
-
... More
ITC Exhaust Fan/Wall Fan upto 450 mm sweep :-Installation of exhaust fan / Wall Fan upto 450 mm sweep in the existing opening, including making the hole to cut the size of the above fan, making good the damage, including connection, testing, commissioning etc as required
37
-
-
... More
S/F Modular Boxes, base & cover plate (Used for TV and Tele.) :-Supplying and fixing following size / modules GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 module (78 mm x 78 mm x 45 mm)
29
-
-
... More
S/F PVC Conduit ( for T.V. and Telephone):-Supplying and fixing of following sizes of PVC conduit alongwith the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required for Tele, T.V.
25 mm
20
-
-
... More
Telephone Wiring in Existing Conduit:-
Supplying and drawing following pair,0.5 sq. mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface/recessed PVC conduit as required.(2 pair)
30
-
-
... More
TV Wiring in Existing Conduit:-TV Cable in Existing Conduit: Supplying and drawing co-axial TV cable RG-6 grade copper conductor, PE insulated, with PVC sheath in the existing surface/recessed PVC conduit as required,
20
-
-
... More
S/F Modular type Switch / Socket:-Supplying and fixing following modular type switch / socket on the existing modular plate and switch box including connections but excluding modular plate etc as required.
-
-
-
... More
5/6 amps,one way switch (for Existing Switch Board)
62
-
-
... More
5/6 amps, 3 pin socket outlet (for Existing Switch Board)
62
-
-
... More
Telephone socket outlet
29
-
-
... More
TV antenna socket outlet
29
-
-
... More
Supply Fitting & Fixing Electronic musical call well
29
-
-
... More
COPPER EARTH PLATE ELECTRODE:-Earthing with copper plate 600mmx 600mmx 3mm thick including acessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.(but without charcoal or cock and salt) complete etc. as required.(2 Nos. for Main Panel,2 Nos. for APFC Panel,3 Nos. for D.G Set, 3 Nos for transformer)
2
-
-
... More
P/F 25 x 5mm copper earth strip in pipe :-Providing and fixing 25mmx5mm cpper earth strip in 40mm & 4.5Mtr long G.I.pipe for earth electrode etc. as required.
10
-
-
... More
Salt & Cock for plate earth elecrode :-Providing and fixing salt and cock for G.I. & copper plate earth elecrode etc. as required.
2
-
-
... More
S/L 8 SWG copper wire in ground (for main panel and AC panel) :- S/L 8 SWG G.I. wire in ground :- Supplying and laying 8 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc. as required.
30
-
-
... More
Supply, fitting, fixing & testing of 18W LED recessed Downlighter with cutout dia 145 mm suitable of Armstrong /CRG/TRAC/USG/Celotex/POP Muduler Celling . Must be white Power doatedpreseure die cast aluminum housing for superior heat management and beautifully designed with white modled in engineering plastic Make:- Wipro/ Philips /Bajaj/jaquar Lighting/opulus
338
-
-
... More
Supply of surface mounted round circular ceiling light fixture LED 1x15W-P LED control gear box,electronic blast etc. complete in all respect as required and as per the standard cataloge item.Make:-Wipro/ Philips /Bajaj/jaquar Lighting/opulus
15
-
-
... More
Supply and fitting of Mirror Light fixture LED 1x10W/12W Make:-Wipro/ Philips /Bajaj/jaquar Lighting/opulus
129
-
-
... More
Supply, fitting, fixing & testing of 7W LED recessed Downlighter with cutout dia 145 mm suitable of Armstrong /CRG/TRAC/USG/Celotex/POP Muduler Celling . Must be white Power doatedpreseure die cast aluminum housing for superior heat management and beautifully designed with white modled in engineering plastic Make:- Wipro/ Philips /Bajaj/jaquar Lighting/opulus
75
-
-
... More
90/100 W LED FLOOD LIGHT FITTING :- Supply of LED Flood Light fitting. (Make:- Wipro/ Philips /Bajaj/jaquar Lighting/opulus
2
-
-
... More
Supply of 1200mm sweep ceiling fans complete without regulator, double ball bearing, motor, blades, down rod, canopies, capacitor, suitable for operation on 230 volts, 50 Hz., 1 phase, AC supply connection with 1.5 sq.mm PVC Copper wire complete as required (BEE Five star rated minimum air delivery of 218 CFM/M , 2 years warranty.Fan shall be approved by engineer incharge/consultant) (COLOUR OF CEILING FANS- WHITE.- ISI.) Make- Havells Velocity 1200 mm / Bajaj 48" Grace Gold Dx / USHA - TECHNIX-PRL/Polycab
33
-
-
... More
Supply fitting fixing and testing of AC 230/250 Volts, 50Hz,300mm sweep Exhaust Fans including providing nuts- bolts, mounting frame and other required accessories etc. (For toilets) Make:- Bajaj / Havell/Polycab.
37
-
-
... More
Carriage Of Materials
-
-
-
... More
Sand - 8 km
52.80795597550001
-
-
... More
Brick - (1+7) km
8796.0301
-
-
... More
Stone Chips 22 km
7.667
-
-
... More
Metal- 22 km
4.124
-
-
... More
Non Schedule
-
-
-
... More
Taking out the old paver blocks and realigning them in proper order by preparing 50mm thick compacted bed of coarse sand and filling the joints with line sand
908.165
-
-
... More
Providing and laying HDPE pipe of 180mm (nominal dia ) for drainage
53.52
-
-
... More
Cladding work with approved quality of 19 mm thick ply wood and wood veneer of approved quality and shade including cost of all material , labour , royalty all complete as per direction of E/I
327.509855
-
-
... More
Supply and fixing of 5mm mirror screwed on 6mm water proof plywood to be fixed on wall with screw 10 % for nails, eyebrow, tapes, adhesives etc.
39.0882
-
-
... More
Providing and Fixing of 18mm thick CNC cut WPC board with Duco paint on both face finish of approved shade as per E/I
16.24
-
-
... More
Providing and Fixing of Single Piece WC with UF slim soft close seat cover , hinges, accessories set, and Flush Cistern Attached with all complete fittings as per direction of E/I
Make - Jaquar Model - LY S-WHT-38851S
35
-
-
... More
Providing and Fixing of 2 Way bib Cock with wall flange with all complete fittings as per direction of E/I
Make - Jaquar Model - KUP-CHR-35041PM
35
-
-
... More
Providing and Fixing of Hand shower (health faucet) with 8mm dia 1.2meter long flexible tube and wall hook as per direction of E/I Model : Jaquar Item Code :ALD-CHR-573
35
-
-
... More
Providing and Fixing of Angular Stop Cock with Wall Flange with all complete fittings as per direction of E/I Model : Jaquar Item Code :KUP-CHR-35053PM
35
-
-
... More
Providing and Fixing of Wash Basin with all complete fittings as per direction of E/I Make - Jaquar Model - JDS-WHT-25909
37
-
-
... More
Providing and Fixing of Waste Coupling 32mm Size Full Thread with 130mm Height with all complete fittings as per direction of E/I Make - Jaquar Model - ALD-CHR-705L130
37
-
-
... More
Providing and Fixing of Bottle Trap with internal partition, 32mm size with 300mm and 190mm Long Wall connection pipes and wall flange with all complete fittings as per direction of E/I
Make - Jaquar Model - ALD-CHR-769L300X190
37
-
-
... More
Providing and Fixing of Concealed body for Single lever basin mixer wall mounted with cartridge sleeve but without exposed parts with all complete fittings as per direction of E/I Make - Jaquar Model - ALD-CHR-233
37
-
-
... More
Providing and Fixing of Exposed part Kit of Single lever basin mixer wall mounted consisteng of operating lever, wall flange, nipple, and spout with all complete fittings as per direction of E/I (suitable for item : ALD-CHR-233)
Make - Jaquar Model - KUP-CHR-35233KPM
37
-
-
... More
Providing and Fixing of Single towel rail 600mm long with all complete fittings as per direction of E/I Make - Jaquar Model - AQN-7711
29
-
-
... More
Providing and Fixing of Towel ring round with all complete fittings as per direction of E/I Make - Jaquar Model - AQN-7721
31
-
-
... More
Providing and Fixing of Urinals with all complete fittings as per direction of E/I Make - Jaquar Model - URS-WHT-13261
3
-
-
... More
Providing and Fixing of Soap Dispenser with all complete fittings as per direction of E/I Make - Jaquar Model - CAN-1135N
29
-
-
... More
Providing and Fixing of Soap Dish (polycarbONATE) with all fitting & arrangements with all complete fittings as per direction of E/I . AQN- 7733, Jaquar.
29
-
-
... More
Providing and Fixing of Jaquar Selfy Shower Panel Anti Finger Print with stainless steel finish (1600x200mm) with all complete fittings as per direction of E/I. Make : Jaquar : JPL-SSF-ST88158B
29
-
-
... More
Providing and Fixing of Hand Dryer- Dualflow Plus with all complete fittings as per direction of E/I
Make - Jaquar Model - HDR-WHT-M14A
2
-
-
... More
Providing and Fixing of Soap Dispenser - Automatic with all complete fittings as per direction of E/I
Make - Jaquar Model - SDR-BLC-DJ0160AS
2
-
-
... More
Providing and Fixing of Paper towel Dispenser -towels with c/s Folds - Wall mounted with all complete fittings as per direction of E/I
Make - Jaquar Model - PTD-SAP-DT0106CS
35
-
-
... More
Providing and Fixing of Gyser , Make Jaguar (ALX-WHT-H030) with all complete fittings as per direction of E/I
30
-
-
... More
Providing and fixing PVC Pipe fittings with all accessories (supreme make)
-
-
-
... More
i) 110 mm Door Tee (Supreme) P.V.C.
5
-
-
... More
iii) 110 mm Door Bend (Supreme) P.V.C.
6
-
-
... More
vi) 110 mm Nahani Trap (Supreme) P.V.C.
5
-
-
... More
i) 75 mm Door Tee (Supreme) P.V.C.
5
-
-
... More
ii) 75 mm Plain Bend (Supreme) P.V.C.
5
-
-
... More
v) 110 mm Plain Trap (Supreme) P.V.C.
5
-
-
... More
Procurement and installation of FRP JALI
84.02000000000001
-
-
... More
Procurement and installation of Luxtures Granimitz old brick - Exposed brick wall tile with all necessary accessories as per direction of E/I
531.6867500000001
-
-
... More
Providing and fixing the Wallpaper on the backwall only with Labour and CP as per direction of E/I
78.37
-
-
... More
Providing and fixing Vertical roller blind as per direction of E/I. Make - AMY Madrid blackout .
53.79
-
-
... More
SUPPLY OF LED STRIP LIGHT FITTING :- Providing and fixing of LED Strip Light with all necessary fittings as per direction of E/I. (Make:- Jaquar Item Code:LSTP03X005XC & LDRV01S030XX or Equivalent)
285
-
-
... More
SUPPLY OF LED SUSPENDED LIGHT FITTING) :-Providing and fixing of Decorative Suspention Light with all necessary Fitting as per direction of E/I (Make:- Jaquar Item Code : JFO-COP-SLPEA031BE27 or euivalent)
39
-
-
... More
12W LED DOWN LIGHT FITTING :- Providing and fixing of Decorative Down Lighter Fitting with all necessary Fitting as per direction of E/I (Make:- Jaquar Item Code : LARV01S012XC or equivalent)
39
-
-
... More
16W LED UP AND DOWN LIGHTED FITTING :- Providing and fixing of Decorative UP and Down Lighter Fitting with all necessary Fitting as per direction of E/I (Make:- Jaquar Item Code : LWWL01X208XW or equivalent)
8
-
-
... More
Procurement and Installation of King Size Bed for Deluxe Rooms with all necessary Fitting as per direction of E/I . Make : Godrej, Squadro
25
-
-
... More
Procurement and Installation of Bed Side Table for Deluxe Roomswith all necessary Fitting as per direction of E/I . Make : Godrej, Squadro
50
-
-
... More
Procurement and Installation of King Size Bed Suite Rooms with all necessary Fitting as per direction of E/I . Make : Godrej, Zen
4
-
-
... More
Procurement and Installation of Bed Side Table for Suite Rooms with all necessary Fitting as per direction of E/I Make : Godrej, Zen
8
-
-
... More
Procurement and Installation of Sofa - 3+1+2 with all necessary Fitting as per direction of E/I - Make: Godrej, D-Alpina
4
-
-
... More
Procurement and Installation of Center Table for Suite Room Lounge Area with all necessary Fitting as per direction of E/I . Make: Godrej, Orbit
4
-
-
... More
Procurement and Installation of Corner table in Suite Room along the sofa with all necessary Fitting as per direction of E/I Make: Godrej, Splenda
8
-
-
... More
Procurement and Installation of Mattress for the king Size Bed with all necessary Fitting as per direction of E/I . Make : Godrej, Ortho Delux Mattress
29
-
-
... More
Procurement and Installation of Numeric Lockable Safe with all necessary Fitting as per direction of E/I . Make Godrej Tarus
29
-
-
... More
Procurement and Installation of Chair for Study Table, with Medium Back with all necessary Fitting as per direction of E/I Make: Astro Mid Back Chair1
4
-
-
... More
Procurement and Installation of Coffee Table and Chair Set for Bed Rooms. Make: Durian, The Brighton coffee set, an ode to post Victorian design with a contemporary edge. comprising cafe style coffee table with two matching chairs. With warm walnut finish with solid wood construction the table sits sung on its three legs with a gorgeous central pillar base. The chairs come with the same finish and have soft fabric upholstered cushions along with slender side bolsters and a curved back that flows from the left to the right. A perfect corner awaits you with the Brighton coffee set. SIZE: (Dia)600mm X (H)610mm. Installation as per direction of E/I
29
-
-
... More
Procurement and Installation of Chairs and Table Set for balcony . Make: Durian - Soak in the sun outside on Adler. A rattan coffee set consisting of a circular coffee table and a pair of chairs. The table is made from rattan with a glass table top for a cozy coffee in the early afternoon. The pair of chairs have a conventional design that cocoons you as you sit down in relaxation. Enjoy a lazy afternoon with Adler as it's never too late for a cuppa joe. SIZE:(Dia)600mm X (H)705mm Installation as per direction of E/I
5
-
-
... More
Supply and Installation of Hight Pressure Laminate as per approved shade , 12mm thick with required accessories : adjustable foots, U-Channel, Gravity Hinges (Right/ Left), Coat Hook with door stopper, Door Knob, Locker with indicator, Wall Bracket, Corner Connector, Top Rail, Screws and Wall Plugs, Noise Deafening tapes for grooves in doors.Overall height : 2025mm including 150mm Ground Clearance. With Shifting to / Unloading Charges at Site. 10(ten ) Years warranty for partitions against any moisture related defects and 1 (one) year warranty for the restroom workmanship and hardware (accessories) against any manufacturing defect. Greenlam Sturdo Classique - Evergreen Series or Equivalent
Installation as per direction of E/I
6
-
-
... More
Supply and Installation of Urinal Partition panel - made of 12mm thick compact laminate total height 1195mm, Depth 550mm, gap from ground 500 to 600 mm . With all required accessories and hardware : Stainless steel L clamp is used to attach the divider to the wall, stainless steel L clamp hardware fittings along with Su 304 screews used to fix the urinal partition on the wall. Including transportation , handling, (loading and un loading shifting at Site in Client Scope).Greenlam Sturdo UMP Model B or Equivalent
Installation as per direction of E/I
3
-
-
... More
Procurement and installation of ss304 sculpture water spout of 4'x3' with welded connection of 1.5'' . Fountain shal include 3hp open well sub ,pump set with panel and aplied equipments. Make aquamatix , pump make ; crompton / kirloskar / ksb or equivalent . 14 W LED ww underwater light make : glowz / aquamatix or equivalent .
10 AMP driver / controller .
12x8 ss water distribution chamber , make : aquamatix or equivalent .
6x4 filter mesh for pump .
installation charge of all the above fountain equipments to ensure successful running / functioning of fountain .
Installation as per direction of E/I
1
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With Reflective glass panes of 4.0 mm thickness
12.269400000000001
-
-
... More
Taking down Exterior supply pipe carefully stacking on the ground and refixing the same if in proper condition after cleaning at thoroughly all complete as per direction of E/l.
20
-
-
... More
Add 12 % GST
1
-
-
... More
Add 1% Labour Cess
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements