Bharat Coking Coal Limited Tender

12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand)

25 mm thick PS flooring 1:2:4

Finishing walls with water proofing cement paint of required shade : Old work (one or more coats @ 2.20 kg/10 sqm) complete.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats)

Providingandfixing4mmthickcoirveneerboard, ISImarkedIS:14842, plainlining with necessary screws, priming coat on unexposed surface etc., complete.

Providingwoodworkinframesofdoors,windows,clerestorywindowsandotherframes, wroughtframedandfixedinposition withholdfastlugsorwithdashfastenersofrequired dia & length (hold fast lugs or dash fastener shall be paid for separately). Kiln seasoned and chemically treated hollock wood

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in charge. (Glazing, paneling and dash fasteners to be paid for separately) : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Providing,hcistingandfixingaboveplinthleveluptofloor fivelevelprecast reinforced cement concrete workinstring courses,bands,copings,bedplates,anchorblocks,plain windowsills and the like, including the cost of required centering, shuttering but, excludingcostofreinfor cement,with1:1.5:3(1cement1.5coarsesand(zone-III)derived fromnaturalsources:3gradedstoneaggregate20mmnominalsizederivedfromnatural sources).

Steel reinforcement orR.C.C.workincludingstraightening, cutting,bending,placingin position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Cleaning of septic tank by mecahnical means

Brickworkwithmodular extrudedbrunt flyashclaysewer bricks (Conforming toIS: 4885 ) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth : cement Mortar 1:4 ( 1 cement : 4 coarse sand)

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing Ist quality ceramic glazedwall tiles conforming to IS: 15622 thickness tobespecifiedbythe manufacturer), ofapproved make, inallcolours, shades exceptburgundy,bottlegreen, lackofanysizeasapprovedby Engineer-in-Charge, in skirting,risersofstepsanddados, over12mmthickbedofcementmortar1:3(1cement: 3coarsesand)andjointingwithgrey cementslurry@3.3kg persqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter

Total impact of GST for the purpose of CTC