Bharat Coking Coal Limited Tender

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate

Half Brick work with common burnt clay modular brick of class designation 5. in foundation and plinth in

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below

Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 meters lead :Door chowkhats

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm all complete.With 2nd class teak wood beading 62X19 mm.

Providing and fixing white vitreous china water closet squatting pan (Indian type)Orissa pattern W.C. pan of size 580x440 mm

Providing and fixing 15 mm C.P. brass pillar taps

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work.

Water proofing cement paint

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :Old work (one or more coats)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Kiln seasoned and chemically treated hollock wood.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes.110 mm diameter

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :100x10 mm

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps

Kitchen sink without drain board 610x460 mm bowl depth 200 mm

ProvidingandfixingfactorymadeuPVCdoorframemadeofuPVCextrudedsections havinganoveralldimensionasbelow(tolerance±1mm),withwallthickness2.0mm(± 0.2mm),cornersofthedoorframetobeJointedwithgalvanizedbracketsandstainless steelscrews,jointsmitredandPlasticwelded.Thehingesideverticaloftheframes reinforcedbygalvanizedM.S.tubeofsize19X19mmand1mm(±0.1mm)wall thicknessand3nos.stainlesssteelhingesfixedtotheframecompleteasper manufacturer’s specification and direction of Engineer- in-charge Extruded section profile size 48x40 mm

24mmthickfactorymadePVCdoorshuttersmadeofstylesandrailsofauPVChollow sectionofsize59x24mmandwallthickness2mm(±0.2mm)withinbuiltedgingonboth sides.ThestylesandrailsmitredandjointatthecornersbymeansofM.S.galvanised/ plasticbracketsofsize75x220mmhavingwallthickness1.0mmandstainlesssteel screws.ThestylesoftheshutterreinforcedbyinsertinggalvanisedM.S.tubeofsize 20x20mmand1mm(±0.1mm)wallthickness.Thelockrailmadeupof'H'section,a uPVChollowsectionofsize100x24mmand2mm(±0.2mm)wallthickness,fixedto theshutterstylesbymeansofplastic/galvanisedM.S.'U'cleats.Theshutterframefilled withauPVCmulti-chamberedsinglepanelofsizenotlessthan620mm,havingoverall thicknessof20mmand1mm(±0.1mm)wallthickness.Thepanelsfilledverticallyand tiebarattwoplacesbyinsertinghorizontally6mmgalvanisedM.S.rodandfastenedwith nutsandwashers,completeaspermanufacturer'sspecificationanddirectionofEngineer- in-charge. (For W.C. and bathroom door shutter).

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :100 mm

P/F panneled shutter windows 30 mm

Providingandfixingflatpressed3layerparticleboardmediumdensityexteriorgrade (GradeI)orgradedwoodparticleboardIS:3087marked,toframe,backingorstudding with screws etc. complete (Frames, backing or studding to be paid separately):18 MM THICK

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble Area of slab upto 0.50 sqm

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete

Total impact of GST for the purpose of CTC